2 - TITAN MACHINERY UKRAINE

Parts Book
612N, 812N, 642N, 842N, 862N
714NT, 814NT, 742NT, 842NT, 862NT
Wishek Mfg. LLC
112 South 2nd Street
PO Box 185
Wishek, ND 58495
(701) 452-2449
www.wishekmfg.com
WARRANTY/ PARTS RETURN POLICY
2
Orientation
Any reference to left (L) or right (R) sides of the frame of the disc is to be understood as viewing from
the rear of the unit looking forward. References to gang components (scrapers) as to left hand (LH) or
right hand (RH) is to be understood as the direction material is deflected off the blade. On offset models,
RH would refer to the front gang and LH would refer to the rear gang. On tandem models, RH would
refer to right side front gangs and left side rear gangs: LH would refer to left side front gangs and right
side rear gangs.
Serial Numbers
Every disc has a serial number plate attached to the front frame tube. These serial numbers are consecutively assigned to each unit as it is manufactured. To aid in parts ordering, always reference the
serial number plate to provide an accurate means of determining the proper parts.
Modifications
It is the policy of Wishek Mfg. LLC to improve its products whenever possible or practical to do so.
Wishek Mfg. LLC reserves the right to make changes , improvements, and modifications at any time
without incurring the obligation to make such changes, improvements, and modifications on any equipment sold previously.
Abbreviations
ASSY…………………………………………………………………………………………………..….Assembly
GR……………………………………………………………………………………………………..Grade of Bolt
HD……………………………………………………………………………………………………....Heavy Duty
LH………………………………………………………………………………………………………....Left Hand
LNT………………………………………………………………………………………..Lowered Wing Tandem
MF……………………………………………………………………………………………………....Main Frame
MTG………………………………………………………………………………………………………..Mounting
N………………………………………………………………………………………………………..Offset Model
NC………………………………………………………………………………………...National Coarse Thread
NF…………………………………………………………………………………………….National Fine Thread
NT…………………………………………………………………………………………………...Tandem Model
OAL………………………………………………………………………………………………….Over All Length
OCL………………………………………………………………………………………...Over Center Lockdown
RH………………………………………………………………………………………………………..Right Hand
W………………………………………………………………………………………………………………...With
W/O…………………………………………………………………………………………………………...Without
3
CONTENTS
Main Frame……………………………………………………………... 5
Hitch……………………………………………………………………… 6
Hitch Parts………………………………………………………………. 7
Leveling Assembly……………………………………………………… 8
Hydraulic Leveling………………………………………………………. 9
Running Gear…………………………………………………………… 10
H611 - 6 Bolt Hub………………………………………………………. 11
H618 - 6 Bolt Hub………………………………………………………. 12
8 Bolt Hub……………………………………………………………….. 13
10 Bolt Hub……………………………………………………………… 14
Gang……………………………………………………………………… 15
Gang Bearings………………………………………………………….. 16
Spring Cushion………………………………………………………….. 17
Disc Blades……………………………………………………………… 18
Standard Scrapers……………………………………………………… 19
Bearing Standard Scrapers……………………………………………. 20
Spool Scrapers………………………………………………………….. 21
Rotary Scrapers………………………………………………………… 22
4" X 12" Non Phasing Cylinder………………………………………... 23
4 1/2" X 12" Phasing Cylinder…………………………………………. 24
4" X 12" Phasing Cylinder……………………………………………… 25
Cylinder Stops…………………………………………………………... 26
Wing Fold Cylinder--5" X 44"………………………………………….. 27
Wing Fold Cylinder--5" X 36"………………………………………….. 28
Wheels & Tires………………………………………………………….. 29
OCL Wing Lock--Small (20' & 22')……………………………………..30
OCL Wing Lock--Common Parts …………………………………….. 31
OCL Wing Lock--Large………………………………………………… 32
OCL Cylinder…………………….……………………………………… 33
Wing Leveling (Lollipop)……………………………………………… 34
Light Kit.…………………………………………………………………. 35
Decals……………………………………………………………………. 36
Misc………………………………………………………………………. 37
4
MAIN FRAME
ITEM
1
2
3
4
5
6
7
8
PART #
106283
106376
106099
105865
1108
1105
1106
105784
105372
DESCRIPTION
Lift Cylinder Mount
Pin-Wing To Main Frame
Pin- Hitch To Main Frame
U-Clamp 1 3/4" (4" X 8" Frame)
U-Clamp 1 3/4" (4" X 6" Frame)
Nut (1 3/4")
Washer (1 3/4")
Hose Clamp
Collar With Hole
Notes:
1. Quantity depends on size and model
2. Winged models only
3. Over center lockdown models-See OCL Pages 30 & 32-Note 3
5
QTY
6
2
6
NOTES
1
2, 3
1
1
1
1
1
2
HITCH
ITEM
1
2
3
4
5
6
7
PART #
1809
106099
105676
104165
106052
107194
104934
1800
DESCRIPTION
Hitch Assembly-- Specify Model
Pin--Hitch to Main Frame
Flange Weld
Hose Holder Weldment
Hose Holder Bracket
Weld On Bracket--2 1/4" Hole Spacing
Weld On Bracket--3" Hole Spacing
Hitch Jack Mount--Weld On
Notes:
1. 9 1/8" OAL X 1 5/16" Diameter
2. Used on units built after 2000
6
QTY
1
2
1
1
1
1
1
1
NOTES
1
2
HITCH PARTS
ITEM
1
2
3
4
5
6
7
13
PART #
1560
1562
104936
107193
104935
105038
1213
1212
107555
1800
1799
1803
105109
106053
105404
107554
DESCRIPTION
Long Wrench
Short Wrench
Clevis Option (Transport Only)
Ag Hitch 2 1/4" Hole Spacing
Ag Hitch 3" Hole Spacing
Bolt 3/4" X 5 1/2"
3/4" Nut
3/4" Lockwasher
Jack--8000 lb Dropleg
Hitch Jack Mount Weld On
Pin, Hitch Jack
Hitch Jack Complete (Includes 9 & 10)
Pin, Ag Hitch--1" X 7 1/4"
Washer-2"OD X 1"ID X 1/4" (Not Shown)
Cotter Pin 3/8" X 2" ( Not Shown)
Jack Plate
QTY
1
1
1
1
1
1
1
1
1
1
1
1
2
4
4
1
14
15
108178
108279
Jack Leg
Pin
1
1
8
9
10
11
12
7
NOTES
LEVELING ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
PART #
104699
107195
1506
1403
105896
105707
104568
104571
1402
103645
105924
103644
103480
DESCRIPTION
Adjustment Tube-Specify Unit
Jam Nut-2" Half Nut
2" Nut W/Set Screw
2" Adjustment Screw-52" Long
2" Adjustment Screw-56" Long
Trunion Weld Assembly
Pivot Assemly
Pivot Assembly
Spring 10" OAL
Spring 14 1/4" OAL
Spring 16 1/4" OAL
Washer Weld Assembly
Large Spring Washer
Notes:
1. Units built after 2000
2. 18 foot and smaller units built before 2000
3. 20 foot and larger units built before 2000
4. 18 foot and smaller unit built after 2000
5. 20 foot and larger units built after 2000
8
QTY
1
1
2
1
1
1
1
1
2
2
2
1
1
NOTES
1
2
3
2
3, 4
5
HYDRAULIC LEVELING
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART #
107440
1904
1966
1967
1968
1965
1908
1969
1970
1912
1913
1962
DESCRIPTION
Hydraulic Leveling Complete Unit
Shaft Lock Nut--1-14
Piston
Headgland
Nut--Cylinder Tube
U Cup
O-Ring
O-Ring
Back-Up Ring
Rod Seal U Cup
Rod Wiper
Seal Kit
Notes:
1. Specify model and cutting width
2. Included in seal kit (1962)
9
QTY
1
1
1
1
1
2
1
1
1
1
1
1
NOTES
1
2
2
2
2
2
2
RUNNING GEAR
ITEM
1
2
3
4
5
6
7
PART #
2026
105647
1816
103654
104258
1214
DESCRIPTION
Wear Sleeve
Wear Sleeve
Main Frame Running Gear End Cap
Wing Running Gear End Cap
Grease Zerk--1/4 X 28
Running Gear--General
Spindle
Notes:
1. Specify model and serial number
2. See hub page
10
QTY
2
1
2
2
2
1
2
NOTES
1
2
H611-6 BOLT HUB
Hub Repair
Kit Includes
1,5,6,7,8& 9
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PART #
1528
103586
1531
1532
1533
1536
1539
1542
1545
1548
1551
1525
3078
1972
DESCRIPTION
Dust Cap (DC 13)
Cotter Pin 3/16" X 1 1/2"
Spindle Nut 1-14
Spindle Washer (WA17)
Outer Bearing (LM67048)
Outer Cup (LM67010)
Inner Cup (LM29710)
Inner Bearing (LM29749)
Dust Seal (SE13)
Hub Only--6 Bolt
Wheel Bolt 1/2"-20NF
Complete Hub--6 Bolt
Hub Repair Kit
Spindle--32"
Notes:
1. Included in hub repair kit (Part # 3078)
2. Included in complete hub (Part # 1525)
11
QTY
1
1
1
1
1
1
1
1
1
1
6
1
1
1
NOTES
1,2
2
2
2
1,2
1,2
1,2
1,2
1,2
2
2
H618-6 BOLT HUB
Hub Repair
Kit Includes
1,5,6,7,8 & 9
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PART #
1529
103586
1531
1532
1534
1537
1540
1543
1546
1552
1549
1526
3077
1973
DESCRIPTION
Dust Cap--DC 15
Cotter Pin--3/16" X 1 1/2"
Spindle Nut-- 1-14
Spindle Washer--WA 17
Outer Bearing (LM48548)
Outer Cup (LM48510)
Inner Cup (25520)
Inner Bearing (25580)
Dust Seal--193353-TA
Wheel Bolt--9/16-18NF
Hub Only (Includes 6 & 7)
Complete Hub (H618)
Hub Repair Kit
Spindle--37"
Notes:
1. Included in hub repair kit (Part # 3077)
2. Included in complete hub (Part # 1526)
12
QTY
1
1
1
1
1
1
1
1
1
6
1
1
1
1
NOTES
1, 2
2
2
2
1, 2
1, 2
1, 2
1, 2
1, 2
2
2
8 BOLT HUB
1975
1974
Repair Kit: Includes Items 1,4,5,6,7,8
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART #
1530
1531
1532
1535
1538
1541
1544
1547
104213
103636
103586
1550
3076
1527
1975
1974
DESCRIPTION
Dust Cap
Spindle Nut 1-14
Spindle Washer
Outer Bearing (2790)
Outer Bearing Cup (2720)
Inner Bearing Cup (3720)
Inner Bearing (3780)
Dust Seal (25091)
Stud Bolt--9/16 -18NF
Stud Nut--9/16-18NF
Cotter Pin 3/16 X 1 1/2
Hub Only (Includes 5 & 6)
Hub Repair Kit (See Note 1)
Complete Hub ( See Note 2)
Spindle--49" OAL (Centerfold Models)
Spindle--42" OAL
Notes:
1. Items included in hub repair kit (Part # 3076)
2. Items included in complete hub (Part # 1527)
13
QTY
1
1
1
1
1
1
1
1
8
8
1
1
1
1
1
1
NOTES
1,2
2
2
1,2
1,2
1,2
1,2
1,2
2
2
2
2
10 BOLT HUB
Hub Repair Kit
Includes Part #’s
6, 7, 8, 9 & 10
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
106395
106459
107663
106396
106397
106398
106399
106400
106451
106452
106455
106453
106454
106460
106457
106456
106159
106840
DESCRIPTION
Dust Cap
Gasket
Cotter Pin--1/4" X 2 1/2"
Spindle Nut--1 1/4-12
Spindle Washer--3/8" X 3"
Outer Bearing (460)
Outer Cup (453A)
Inner Cup (39520)
Inner Bearing (39585)
Dust Seal (CR30087)
Hub Only (Includes 7 & 8)
Stud Bolt--3/4-16
Stud Nut--3/4-16 Flange
Bolt-Dust Cap--5/16" X 1/2"
Hub Repair Kit
Complete Hub
Spindle--50" Long--Dual Wheels
Spindle--34" Long--Single Wheels
Notes:
1. Included in hub repair kit (Part # 106457)
2. Included in complete hub (Part # 106456)
14
QTY
1
1
1
1
1
1
1
1
1
1
1
10
10
1
1
1
1
NOTES
2
2
2
2
2
1, 2
1, 2
1, 2
1, 2
1, 2
2
2
2
Gang
ITEM
1
2
3
4
5
6
7
8
PART #
DESCRIPTION
1506
Nut W/Set Screw
105516
Set Screw (9/16" X 1")
106923
End Washer (Replaces 1507)
107933
1/2 Spacer--13" Spacing (8 3/8" OAL)
105740
1/2 Spacer--11" Spacing (6 3/8" OAL)
106804
1/2 Spacer--10" Spacing (5 3/8" OAL)
1207
1/2 Spacer--9" Spacing (4 3/8" OAL)
1502
Gang Shaft (1 15/16" Dia)--Specify Length
105283
Cast 1/2 Spacer (2 3/4" OAL)
107670
Spacer--13" Spacing (12 1/2" OAL)
1202
Spacer--11" Spacing (10 1/2" OAL)
1203
Spacer--10" Spacing (9 1/2" OAL)
1201
Spacer--9" Spacing (8 1/2" OAL)
104274
End Washer (1/4")
Gang Tube (Specify Size & Length)
15
QTY
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
NOTES
GANG BEARINGS
ITEM
1
2
3
4
5
6
7
8
9
10
11
PART#
1702
1212
1213
103504
103500
103588
1103-214
1102-214
1220
1217
1216
104884
108336
108335
DESCRIPTION
U-Clamp--3/4" X 6" X 6"
Lockwasher--3/4" (Not Shown)
Nut--3/4" (Not Shown)
Bearing Standard (28" & 30" Blades)
Bearing Standard (24" & 26" Blades)
1/8" NPT 90 Degree Zerk
214 Bearing Housing
214 Bearing (2" Bore X 4.9" OD)
Bolt--1/2" x 3 1/2" NC
Lockwasher--1/2"
Nut--1/2"
Bearing Guard Washer
Bearing Guard
Bolt--1/2"x4 1/2"NC
QTY
1
2
2
1
1
1
1
1
4
4
1
2
1
2
Notes:
1. Optional equipment
2. Replaces 104693 LH bearing guard and 108030 RH bearing guard
16
NOTES
1
1, 2
1
SPRING CUSHION
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART #
1950
104788
103608
107183
106084
108149
104258
1702
1213
1212
1949
1948
103514
103448
103440
1946
103511
1947
1404
1213
1212
104947
104946
DESCRIPTION
Scraper Bar Bracket--24" Blades
Scraper Bar Bracket--26" Blades
Scraper Bar Bracket--28" Blades
Scraper Bar Bracket--30" Blades
U-Clamp--5/8" X 2" X 3 7/8"
Flange Nut--5/8"
Grease Zerk--1/4 X 28
U-Clamp--3/4" X 6" X 6"
Nut--3/4"
Lockwasher--3/4" (Not Shown)
Pin--1 15/16" X 10 3/4"
Bolt--3/4" X 9"
Bushing--T-Bolt
Spring Bucket--24"-26" Blade Models
Spring Bucket--28"-30" Blade Models
Spring--6 1/2" X 15 3/8"
Spring End Cap
T-Bolt--1 3/4" X 19 1/2"
Half Nut--1 3/4"
Nut--3/4"
Lockwasher--3/4"
Bolt--1/2" X 3"
Nut--1/2" Top Lock
17
QTY
1
1
1
1
1
2
1
1
2
2
1
1
1
1
1
1
1
1
2
1
1
2
2
NOTES
BLADES
ITEM
1
PART #
142-18
107270
142-22
516-24
104553
106075
106021
106475
DESCRIPTION
3/16" X 18" Blade
1/4" X 20" Blade
1/4" X 22" Blade
5/16" X 24" Blade
5/16" X 26" Blade
5/16" X 28" Blade
5/16" X 30" Blade
5/16" X 32" Blade
QTY
1
1
1
1
1
1
1
1
NOTES
1
1
1
1
1
1
1
2
ITEM
2
PART #
516-24N
105325
106100
105470
106527
105240
DESCRIPTION
5/16" X 24" Notched Blade
5/16" X 26" Notched Blade
5/16" X 28" Notched Blade
5/16" X 30" Notched Blade
5/16" X 32" Notched Blade
1/2" X 36" Notched Blade
QTY
1
1
1
1
1
1
NOTES
1
1
1
1
2
2
Notes:
1. 2" center hole
2. 2 3/4" center hole
18
STANDARD SCRAPERS
ITEM
1
2
3
4
5
6
7
8
9
10
PART #
1993
108032
108031
108033
105216
1302
105304
1219
1216
1217
1304
106084
108149
DESCRIPTION
Mud Scrapers--RH--24"Blade
Mud Scrapers--LH--24" Blade
Mud Scrapers--RH--28" Blade
Mud Scrapers--LH--28" Blade
Standard Scraper Blade--3/8" Thick
Standard Scraper Blades--3/16" Thick
Scraper Mount
Bolt--1/2" X 1 1/2"
Nut--1/2"
Lockwasher--1/2"
2" X 2" Scraper Tube--Specify Length
U-Clamp--5/8"
Flange Nut--5/8"
19
QTY
1
1
1
1
1
1
1
2
2
2
1
1
2
NOTES
BEARING STD SCRAPER
Left Hand Scraper
ITEM
1
2
3
4
5
6
7
8
9
10
11
PART #
107715
105920
107199
107716
105917
107200
105919
107197
107714
107196
105918
107198
107713
105916
106084
108149
1219
2084
107208
Right Hand Scraper
DESCRIPTION
Left Hand Scraper Complete--13" Spacing
Left Hand Scraper Complete--11" Spacing
Left Hand Scraper Complete--10" Spacing
Right Hand Scraper Complete--13" Spacing
Right Hand Scraper Complete--11" Spacing
Right Hand Scraper Complete--10" Spacing
Left Hand Weldment--11" & 13" Spacing
Left Hand Weldment--10" Spacing
Left Hand Adjust Plate--13" Spacing
Left Hand Adjust Plate--10" & 11" Spacing
Right Hand Weldment--11" & 13" Spacing
Right Hand Weldment--10" Spacing
Right Hand Adjust Plate--13" Spacing
Right Hand Adjust Plate--10" & 11" Spacing
5/8" U-Clamp
Flange Nut--5/8”
Bolt--1/2” X 1 1/2”
Flange Nut--1/2”
Flat Washer--1/2”
20
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
NOTES
1
1
1
1
1
1
SPOOL SCRAPER
ITEM
1
2
3
4
5
6
7
8
9
PART #
106471
106472
106084
108149
105304
1219
1217
1216
106907
DESCRIPTION
Spool Scraper--Left Hand
Spool Scraper--Right Hand
U-Clamp--5/8"
Flange Nut--5/8"
Scraper Mount
Bolt--1/2" X 1 1/2"
Lockwasher--1/2"
Nut--1/2"
Complete Assembly--Specify RH or LH
21
QTY
1
1
1
2
1
2
2
2
1
NOTES
ROTARY SCRAPER
ITEM
1
2
3
4
5
6
7
8
PART #
107155
104322
108066
7095
108065
108099
108045
108062
108061
DESCRIPTION
Nut
Blade
Washer Assembly
Bearing
Bearing Bracket RH (Pictured)
Bearing Bracket LH (Not Shown)
Bolt--5/8" X 1 1/2" Flange Head
Complete Assembly--RH
Complete Assembly--LH
Notes:
1. Includes Part #'s 1, 2, 3, 4, 5, & 6
22
QTY
1
1
1
1
1
1
1
1
1
NOTES
1
1
4” X 12” CYLINDER
18 FOOT & SMALLER MAIN FRAME
106069 (1 1/2” CYLINDER PINS)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
106069
106070
104992
104654
104947
104946
1904
103173
103224
1968
103175
103174
1908
1912
1969
1970
103225
103218
DESCRIPTION
Complete Cylinder--4" X 12"
Barrell Only
Rod Only
Pin--1 1/2" X 4 1/4"
Bolt--1/2" X 3"
Nut--1/2" Top Lock
Shaft Lock Nut--1-14
Piston--4" Phasing
Headgland--4" Phasing
Cylinder Tube Nut--4"
Wear Ring
Piston Seal
O Ring
Rod Seal U Cup
O Ring
Back Up Ring
Rod Wiper
Seal Kit--4" Phasing
Notes:
1. Included in seal kit
23
QTY
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
NOTES
1
1
1
1
1
1
1
4 1/2” X 12” PHASING CYLINDER
20 FOOT & LARGER MAIN FRAME
104941 (1 1/2” CYLINDER PINS)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
104941
104993
104992
104654
104947
104946
1904
103246
103245
103255
103247
103248
1908
1912
103249
103250
103225
104097
DESCRIPTION
Complete Cylinder--4 1/2" X 12" Phasing
Barrell Only
Shaft Only
Pin--1 1/2" X 4 1/4"
Bolt--1/2" X 3"
Nut--1/2" Top Lock
Shaft Lock Nut--1-14
Piston--4 1/2" Phasing
Headgland--4 1/2" Phasing
Cylinder Tube Nut--4 1/2"
Wear Ring
Piston Seal
O Ring
Rod Seal U Cup
O Ring
Back Up Ring
Rod Wiper
Seal Kit--4 1/2" Phasing
Notes:
1. Included in seal kit
24
QTY
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
NOTES
1
1
1
1
1
1
1
4” X 12” PHASING CYLINDER
20 FOOT & LARGER WING CYLINDER
104940 (1 1/2” CYLINDER PINS)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
104940
104994
104992
104654
104947
104946
1904
103173
103224
1968
103175
103174
1908
1912
1969
1970
103225
103218
DESCRIPTION
Cylinder Complete--4" X 12" Phasing
Barrell Only (1 1/2" Pins)
Shaft Only (1 1/2" Pins)
Pin--1 1/2" X 4 1/4"
Bolt--1/2" X 3"
Nut--1/2" Top Lock
Shaft Lock Nut--1-14
Piston--4" Phasing
Headgland--4" Phasing
Nut--Cylinder Tube--4"
Wear Ring
Piston Seal
O Ring
Rod Seal U Cup
O Ring
Back Up Ring
Rod Wiper
Seal Kit--4" Phasing
Notes:
1. Included in seal kit
25
QTY
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
NOTES
1
1
1
1
1
1
1
CYLINDER STOPS
ITEM
1
2
3
4
5
6
PART #
1979
1980
1978
105996
105997
1920
DESCRIPTION
Pin--1/2" X 4 3/4"
Hair Pin Clip
Transport Lockup Bracket
1" Segment Only
1 1/2" Segment Only
Depth Control Kit Complete
Notes:
1. Includes pin (1979) and clip (1980)
2. 2" cylinder shaft
26
QTY
1
1
1
1
1
1
NOTES
1
2
2
2
WING FOLD CYLINDER
106174 (5” X 44” CYLINDER - 20’ TO 26’
WINGED MODELS - 2000 & NEWER)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
106174
107724
107703
103166
104583
104582
104584
103176
104622
104621
104624
104623
104057
104056
104625
104654
104947
104946
DESCRIPTION
Complete Cylinder--5' X 44"
Barrell Only
Shaft Only
Shaft Lock Nut--1-14
Piston
Headgland
Cylinder Nut
O-Ring--Piston
Wear Ring
Piston Seal
O-Ring
Back-Up Ring
Rod Seal
Rod Wiper
Seal Kit
Pin--1 1/2" X 4 1/4"
Bolt--1/2" X 3"
Nut--1/2" Top Lock
Notes:
1. Included in seal kit (104625)
27
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
NOTES
1
1
1
1
1
1
1
WING FOLD CYLINDER
106386 (5” x 36” CYLINDER - 28’ TO 38’
WINGED MODELS - 2000 & NEWER)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
106386
107704
107705
103166
104583
104582
104584
103176
104622
104621
104624
104623
104057
104056
104625
104654
104947
104946
DESCRIPTION
Complete Cylinder--5" X 36"
Barrell Only
Shaft Only
Shaft Lock Nut--1-14
Piston
Headgland
Cylinder Nut
O-Ring--Piston
Wear Ring
Piston Seal
O-Ring--Piston
Back-Up Ring
Rod Seal
Rod Wiper
Seal Kit
Pin--1 1/2" X 4 1/4"
Bolt--1/2" X 3"
Nut--1/2" Top Lock
Notes:
1. Included in seal kit (104625)
28
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
NOTES
1
1
1
1
1
1
1
WHEELS & TIRES
ITEM
1
2
3
4
PART #
1804
104214
105313
106014
107238
1520
105314
106013
105282
106012
107239
DESCRIPTION
Rim--15" X 8" X 6 Hole (11L X 15" Tire)
Rim--15" X 10" X 6 Hole (12.5L X 15" Tire)
Rim--15" X 10" X 8 Hole (12.5L X 15" Tire)
Rim--11.75 X 22.5 X 8 Hole (385/65R22.5)
Rim--11.75 X 22.5 X 10 Hole
(385/65R22.5)
11L X 15" Tire
12.5L X 15" Tire
385/65R22.5" Tire
Assembly--8 Bolt Rim W/12.5L X 15" Tire
Assembly--8 Bolt Rim W/385/65R22.5 Tire
Assembly-10 Bolt Rim W/385/65R22.5 Tire
29
QTY
1
1
1
1
1
1
1
1
1
1
1
NOTES
OCL WING LOCK (SMALL)
20’ TO 22’ MODELS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART #
105848
105343
105357
1903
107593
103586
105334
105356
105348
105321
105358
105359
DESCRIPTION
Tower Assembly--Weldment
Bellcrank Assembly
Pin--14 5/8" Long
Pin--1" Dia X 2 1/4" Long
Washer--1” ID X 1 1/2” OD 18 ga
Cotter Pin--3/16” X 1 1/2”
Control Arm
Cylinder--5" X 20 1/8"
Cylinder Anchor--Weldment
Side Plate
Pin--17 1/16" Long
Pin--11 1/4" Long W/ Grease Zerk
QTY
1
1
2
2
2
2
2
1
1
2
1
1
Notes:
1. Specify front or rear & LH or RH
2. Center wing pivot pin with grease zerk
3. Front & rear wing pivot pins with grease zerk 8 3/8" long--Part # 104771
30
NOTES
1
2, 3
OCL WING LOCK
COMMON PARTS (ALL OCL UNITS)
ITEM
1
2
PART #
104947
104946
DESCRIPTION
Bolt--1/2" X 3"
Nut--1/2" Top Lock
QTY
8
8
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
103690
105345
1948
104678
108346
104653
104608
104728
104780
1212
1213
104258
104781
107609
104338
107188
Cotter Pin--3/8" X 3"
Collar--Weldment
Bolt--3/4" X 9"
Adjust Base
Attaching Plate
Pin
Adjustment Bolt (Lollipop)
Nut--1 1/4"
Jam Nut--1 1/4"
Lockwasher--3/4"
Nut--3/4"
Grease Zerk--1/4 X 28
Washer--1 1/4"
Carriage Bolt--3/4” X 2”
Bolt--3/4” X 2”
Lock Nut--3/4”
1
2
6
1
1
1
1
2
1
6
6
1
2
2
4
6
31
NOTES
OCL WING LOCK (LARGE)
24’ TO 26’ MODELS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART #
104713
104720
105357
1903
104725
104692
104741
104844
105358
105359
107593
103586
DESCRIPTION
Tower Assembly--Weldment
Bellcrank
Pin--14 5/8" Long
Pin--1" Dia X 2 1/4" Long
Control Arm
Cylinder--5" X 24 3/4"
Cylinder Anchor--Weldment
Side Plate
Pin--17 1/16" Long
Pin--11 1/4" Long W/ Grease Zerk
Washer--1” ID X 1 1/2” OD 18 ga
Cotter Pin--3/16” X 1 1/2”
QTY
1
1
2
2
2
1
1
2
1
1
2
2
Notes:
1. Specify front or rear & LH or RH
2. Center wing pivot pin with grease zerk
3. Front & rear wing pivot pins with grease zerk--8 3/8" long--Part # 104771
32
NOTES
1
2, 3
OCL CYLINDER-5” BORE
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART #
104692
105356
107722
106087
108342
108341
107254
107255
104582
104584
107256
104622
104621
104624
104623
104057
104056
107721
104258
104946
105358
105357
104947
DESCRIPTION
Complete Cylinder--5" X 24 3/4"
Complete Cylinder--5" X 20 1/8"
Barrell Only--5" X 24 3/4"
Barrell Only--5" X 20 1/8"
Shaft Only--2 1/2" X 29 3/8"
Shaft Only--2 1/2" X 24 1/2"
Lock Nut--1 1/4"
Piston
Headgland
Cylinder Nut
O-Ring--Piston
Wear Ring
Piston Seal
O-Ring--Piston
Back Up Ring
Rod Seal
Rod Wiper
Seal Kit
Grease Zerk--1/4-28
Nut--1/2" Top Lock
Pin--17 1/16" Long
Pin--14 5/8" Long
Bolt--1/2" X 3"
Notes:
1. Large over center lockdown units (24'-26')
2. Small over center lockdown units (20'-22')
3. Included in seal kit (107721)
33
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
2
NOTES
1
2
1
2
1
2
3
3
3
3
3
3
3
WING LEVELING
(LOLLIPOP)
For Units With 1 1/2” Cylinder Pins
ITEM
1
2
3
PART #
104608
104780
104728
DESCRIPTION
Screw Only (Lollipop)
Jam Nut--1 1/4"
Nut--1 1/4"
34
QTY
1
2
1
NOTES
LIGHT KIT
ITEM
1
2
3
4
5
6
7
8
PART #
108085
107602
108080
108081
108343
108344
108071
108070
108345
DESCRIPTION
Light Bracket Weldment
Bolt--3/8" X 1"
Sliding Light Bracket--RH
Sliding Light Bracket--LH
Warning Light--Amber
Warning Light--Red
Light Bracket--Long
Light Bracket--Short
Wiring Harness
Notes:
1. Winged models only
2. 2 used per bracket
3. Non-Winged models only
4. Specify model & size
35
QTY
1
2
1
1
1
1
1
1
1
NOTES
1
2
1
1
3
3
4
DECALS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART #
108237
108239
108240
108242
108238
108241
105897
108243
108245
108244
103581
104585
105441
104986
107373
105235
105233
104157
104158
105234
DESCRIPTION
Decal--612N
Decal--642N
Decal--714NT
Decal--742NT
Decal--812N
Decal--814NT
Decal--842N
Decal--842NT
Decal--862N
Decal--862NT
Decal--Wishek--5" X 24 1/2"
Decal--Wishek--3" X 15"
Decal--Leveling Adjust
Decal--4" Cylinder
Decal--4.5" Cylinder
Decal--Warning
Decal--Danger
Decal--Check Wheels
Decal--Caution--Lock Up Bracket
Decal--Overhead Wing Hazard
36
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NOTES
MISC
ITEM
1
2
3
4
5
PART#
103612
104446
107660
107633
240799
DESCRIPTION
Green Paint
Yellow Paint
Black Paint
Red Paint
460ep Grease (10 Pack)
37
QTY
1
1
1
1
1
NOTES