RACO Steel Boxes and Covers

Transcription

RACO Steel Boxes and Covers
RACO STEEL BOXES
& COVERS
A2
G E N E R A L I N F O R M AT I O N – S T E E L B O X E S A N D C O V E R S
Applications: Steel Boxes
RACO® high-quality steel boxes:
• Are used in branch circuit wiring
to splice wires
• Accommodate wiring devices,
such as switches and receptacles
• Most may also serve as fixture
supports
• Provide excellent protection
for wiring system or devices
• Must be closed with a cover,
light fixture canopy or wallplate
• Permit access to conductors
for maintenance
• Allow for branch circuit runs
• Provide two-hour fire rating for 4x4
or smaller wall opening
Product Features: Outlet Boxes
for Fixture or Fan Support
These high-quality boxes:
• Are listed to support lighting fixture
canopies or fans
• Feature oversized #10 screws
to provide strength and rigidity
Product Features:
Patented TKO® Knockouts
• TKO® knockouts offer greater flexibility with RACO® patented combination 1/2" and 3/4" knockout
• Stock just one product instead
of two or three
• One product for the installer
to carry
TKO® Provides Reliable
Grounding Path
• Independent tests conducted by
UL prove that the TKO® passes the
same high-current fault test used
to test grounding bushings and
ground lugs
• RACO TKO knockout is UL
Listed, providing bonding without
the use of bonding jumpers
®
®
• Suitable for bonding without any
additional bonding means around
concentric (or eccentric, TKO)
knockouts where used in circuits
above or below 250V
• This knockout does not impair the
electrical connection to ground
Most RACO® Boxes Have At
Least One Tapped #10-32
Grounding Hole
• The products that do not have
a grounding hole are: plenum
boxes catalog numbers 226
and 239
Product Features:
Combination Screw Heads
• Cover and clamp screws have
combination slotted/Phillips heads
• Self-tapping screws provide
for 100% thread engagement
Metallic Boxes: Fire Resistance
Rating Wall Penetrations*
Listed single- and double-gang
metallic outlet and switch boxes
with metallic or nonmetallic cover
plates, also 4x4 and octagon boxes
may be used in bearing and nonbearing wood stud and steel stud
walls with ratings not exceeding
two hours.
The surface area of individual metallic outlet or switch boxes shall not
exceed 16 square inches through a
fire rated wall. The aggregate surface
area of the boxes shall not exceed
100 square inches per 100 square
feet. Boxes located on opposite
sides of walls or partitions shall be
separated by a horizontal distance
of 24 inches.
The metallic outlet or switch boxes
shall be securely fastened to the
studs, and the opening in the wallboard facing shall be cut so that the
clearance between the box and the
wallboard does not exceed 1/8 inch.
*Reference: UL Fire Resistance
Directory (Orange Book)
Standard Material: Steel Covers,
Outlet And Switch Boxes
• Steel boxes and covers are made
of .0625 inch thick pre-galvanized
sheet steel
• Handy Box covers are made of
.030 inch thick galvanized sheet
steel
A3
Compliances
RACO® steel boxes and covers generally carry the following compliance
ratings. Check specific catalog
pages for individual compliances.
• UL Listed – Standard 514-A,
file E195978 (“QCIT” Category)
• Boxes are listed for their Electrical
Applications (electrical codes), UL
Green Book
• Boxes are listed for mechanical
properties, including the Two-Hour
Fire Rating, (building codes) UL
Orange Book
• CSA Certified – C22.2 #18,
CSA File LR-1082
• U.S. Federal Specification and
Standards W-J-800
• ANSI/NEMA OS1
• Federal Manufacturer’s number
28488
Reference Data
• TKO® knockout U.S. Patent
4,640,433; Canada Patent
1,260,597
• Ceiling fan outlet box U.S.
Patent 4,892,211; Canada Patent
1,324,360; Mexico Patent 166,125
• Far-side support (#978) U.S.
Patent 4,898,357
• BOX-LOC® U.S. Patent 5,408,045
MEXICO Patent 186848
• Adjust-A-Brace® U.S. Patent
5,330,137 and 5,927,667 U.S.
• Steel Stud box Support (#978)
4,898,357 U.S.
• W.P. self tap holes 4,898,453 U.S.
and 4,906,206 U.S.
For installation guidelines and to learn
more about RACO products, visit the
NEMA website at http://www.nema.org.
The National Electrical Manufacturers
Association (NEMA) website is a
valuable electrical resource providing
the information you need - quickly.
Standards and technical information,
installation guides, industry news and
economic trends, events/meetings, the
latest electoindustry, and legislative and
regulatory information for more than
fifty-one product areas ranging from
arc welding to x-ray machines can
be found with just a few clicks of
your mouse.
NEMA, celebrating its 75th
anniversary in 2001, is the leading
trade association in the United States
representing the interests of electroindustry manufacturers. Founded in
1926 and headquartered near
Washington, D.C., its 500 member
companies manufacture products
used in the generation, transmission
and distribution, control, and enduse of electricity. Annual shipments
of these products total $100 billion.
RACO STEEL BOXES
& COVERS
G E N E R A L I N F O R M AT I O N – S T E E L B O X E S A N D C O V E R S
RACO STEEL BOXES
& COVERS
A4
G E N E R A L I N F O R M AT I O N – S TA N D A R D S , 1 9 9 9 N AT I O N A L E L E C T R I C A L C O D E S ®
Wiring Capacity: Steel Outlet
And Switch Boxes; Cubic Inches
Maximum Number of Conductors
or Minimum Size Box Required –
National Electrical Code Article
370-16
The purpose of NEC Article 370-16
is to determine the maximum conductor count or the minimum box
size required for an application. It
also may be used to determine how
many other conductors may be
added without exceeding the Codeprescribed limit. Most applications
have determined the number of
conductors. The question that then
remains is the smallest (minimum)
size box that is permitted. The rules
of Article 370-16 are to be used to
determine the Code-recognized limit.
Selection of an outlet or junction box
for use in an electrical circuit work
must take into consideration the
maximum number of wires permitted
in the box. Safe electrical practice
demands that wires not be jammed
into boxes because of the possibility
of nicks, abrasions or other damage
to the insulating material, creating
the potential for ground faults or
short circuits.
(a) Box Volume Calculations. The
volume of a wiring enclosure (box)
shall be the total volume of the
assembled sections, and, where
used, the space provided by plaster
rings, domed covers, extension rings,
etc., that are marked with their volume in cubic inches or are made
from boxes the dimensions of which
are listed in Table 370-16(a).
(2) Clamp Fill. Where one or
more internal cable clamps, whether
factory or field supplied, are present
in the box, a single volume allowance
in accordance with Table 370-16(b)
shall be made based on the largest
conductor present in the box. No
allowance shall be required for a
cable connector with this clamping
mechanism outside the box.
(1) Standard Boxes. The volume
of standard boxes that are not
marked with a cubic inch capacity
shall be as given in Table 370-16(a).
(3) Support Fittings Fill. Where
one or more fixture studs or hickeys
are present in the box, a single volume allowance in accordance with
Table 370-16(b) shall be made for
each type of fitting based on the
largest conductor present in the box.
(2) Other Boxes. Boxes 100
cubic inches (1,640 cu. cm3.) or less,
other than those described in Table
370-16(a), and nonmetallic boxes
shall be durably and legibly marked
by the manufacturer with their cubic
inch capacity. Boxes described in
Table 370-16(a) that have a larger
cubic inch capacity than is designated in the table shall be permitted to
have their cubic inch capacity
marked as required by this section.
(b) Box Fill Calculations. The
volumes in paragraphs (1) through (5)
below, as applicable, shall be added
together. No allowance shall be
required for small fittings such as
locknuts and bushings.
Article 370 – Boxes and Fittings
370-16. Number of Conductors in
Outlet, Device, and Junction
Boxes, and Conduit Bodies. Boxes
shall be of sufficient size to provide
free space for all enclosed conductors. In no case shall the volume of
the box, as calculated in (a) below,
be less than the fill calculation as calculated in (b) below. The minimum
volume for conduit bodies shall be as
calculated in (c) below.
The provisions of this section shall not
apply to terminal housings supplied
with motors. See Section 430-12.
Boxes and conduit bodies enclosing
conductors, size #4 or larger, shall
also comply with the provisions of
Section 370-28.
(1) Conductor Fill. Each
conductor that originates outside
the box and terminates or is spliced
within the box shall be counted once,
and each conductor that passes
through the box without splice or
termination shall be counted once.
The conductor fill, in cubic inches,
shall be computed using Table 37016(b). A conductor, no part of which
leaves the box, shall not be counted.
Exception: Where an equipment
grounding conductor or not over
four fixture wires smaller than
#14, or both, enter a box, from
a domed fixture or similar canopy
and terminate within that box,
it shall be permitted to omit these
conductors from the calculations.
(4) Device or Equipment Fill.
For each yoke or strap containing
one or more devices or equipment,
a double volume allowance in accordance with Table 370-16(b) shall be
made for each yoke or strap based
on the largest conductor connected
to a device(s) or equipment supported by that yoke or strap.
(5) Equipment Grounding
Conductor Fill. Where one or more
equipment grounding conductor(s)
enter(s) a box, a single volume
allowance in accordance with Table
370-16(b) shall be made based on
the largest equipment grounding conductor present in the box. Where an
additional set of equipment grounding
conductors, as permitted by Section
250-74, Exception #4, is present
in the box, an additional volume
allowance shall be made based on
the largest equipment grounding
conductor in the additional set.
Reprinted with permission from the NFPA 70-1999. National
Electrical Code ®‚ Copyright© 1999. National Fire Protection
Association, Quincy, MA 02269. This reprinted material is not
the complete and official position of the NFPA on the reference
subject which is represented only by the standard in its entirety.
National Electrical Code ®‚ and NEC®‚ are registered trademarks
of the National Fire Protection Association, Quincy, MA.
A5
MOST OFTEN REQUESTED ARTICLES OF THE
1999 NATIONAL ELECTRICAL CODE®
HOW RACO® PRODUCTS HELP COMPLETE
THE INSTALLATION
250-97 (d) Method of Bonding Service Equipment —
Bonding Jumpers. Bonding jumpers are not required
for concentric and eccentric knockouts if they are listed
for the purpose.
This Article is used to ensure that there is ground
continuity when a concentric or eccentric knockout
is encountered. A bonding jumper is not required when
using any of the RACO® patented TKO® knockout boxes,
Catalog Numbers 189, 232, etc.
370-27 (a) Boxes at Lighting Fixture Outlets. Boxes
to support light fixtures must be listed for fixture support.
Exception: Device boxes are allowed to support wall
mounted fixtures not over 6 lbs.
Device boxes use #6-32 screws to secure devices such
as snap-switches and receptacles. They are not suitable
for support of other than very lightweight lighting fixtures,
such as some wall-bracket types. See Article 410-16.
All RACO® 4" and 4-11/16" square boxes are listed
for fixture support.
370-27 (b) Floor Boxes. Boxes listed specifically for this
application shall be used for receptacles located in the
floor. Exception: Boxes located in elevated floors of show
windows and similar locations where the authority having
jurisdiction judges them free from physical damage,
moisture and dirt.
Only boxes that are UL Listed for the application
may be fastened into the floor. RACO® floor boxes
are in Section E of this catalog.
370-27 (c) Boxes at Fan Outlets. Boxes that support
ceiling fans must be listed for that purpose.
For any ceiling outlet that is intended to have a ceiling
(paddle) fan installed, a UL Listed outlet box rated for
ceiling fan support must be installed. RACO® offers
a complete line of products designed for various
applications and mounting needs.
410-10 Space for Conductors. Canopies and outlet
boxes taken together shall provide adequate space so
that fixture conductors and their connecting devices can
be properly installed.
When calculating the minimum cubic inch requirements
for an outlet box, the canopy may be included in the
calculation at the discretion of the Authority Having
Jurisdiction. If the canopy of the fixture/fan is marked with
the cubic inch capacity, then the additional volume must
be accepted by the Authority Having Jurisdiction.
410-16 (a) Means of Support – Outlet Boxes. Fixtures
greater than 50 pounds cannot be supported by a fixture
box unless the box has been listed for a heavier load.
All outlet boxes that are intended to be used with fixtures
are tested in accordance with UL Standard 514-A.
410-56 (f) Receptacles in Raised Covers. Receptacles
installed in cover shall not be secured solely by a single
screw. Exception: Devices, assemblies or box covers
listed and identified for such use. Note that this does
not apply to wall plates.
The intent of the additional support screw is to prevent
the device from coming loose. A loose device could cause
a safety hazard to personnel while inserting or removing
a plug.
RACO STEEL BOXES
& COVERS
RACO STEEL BOXES
& COVERS
A6
MOST OFTEN REQUESTED ARTICLES OF THE 1999
NATIONAL ELECTRICAL CODE®
HOW RACO® PRODUCTS HELP COMPLETE
THE INSTALLATION
422-18 Support of Ceiling Fans.
(a) Ceiling Fans 35 lbs. or Less. Listed ceiling fans that
do not exceed 35 pounds in weight, with or without
accessories, shall be permitted to be supported by outlet
boxes identified for such use and supported in accordance with Sections 370-23 and 370-27.
(b) Ceiling Fans Exceeding 35 lbs. Boxes may support
heavier loads when so listed, or the fan shall be supported independently of the outlet box. See Section 370-23.
Unless otherwise marked, a UL Listed outlet box listed for
ceiling fan support can support a maximum of 35 pounds.
All of RACO® steel fan outlet boxes use hardened #10-32
screws for support of the fan. Captive star lock-washers
prevent the screws from loosening, providing a safe and
secure installation.
800-52 (c) Installation of Communications Wires,
Cables and Equipment — Electric Light or Power
Circuits. Communications conductors shall not be placed
in any raceway, compartment, outlet box, junction box,
or similar fitting with conductors of electric light or power
circuits or Class 1 circuits.
When power and voice/data are brought to one enclosure,
a means of dividing the wiring is required. Voltage dividers
are available on the following box types: 4"and 4-11/16"
square boxes, three- and four-gang switch boxes,
masonry boxes, and gang boxes.
A7
RACO STEEL BOXES
& COVERS
G E N E R A L I N F O R M AT I O N – B O X S E L E C T I O N
STEEL BOX SELECTION CHART
CU. IN.
42.0
30.3
29.5
21.5
21.0
18.0
16.5
4-11/16" Sq.
2-1/8" Deep
4" Sq.
2-1/8" Deep
4-11/16" Sq.
1-1/2" Deep
4" Sq.
2-1/8" Deep
4" Sq.
1-1/2" Deep
Switch
3-1/2" Deep
Handy
2-1/8" Deep
15.5
14.0
13.0
12.5
6.0
4" Oct.
1-1/2" Deep
Switch
2-3/4" Deep
Handy
1-7/8" Deep
Switch
2-1/2" Deep
4" Rnd. Pan
1/2" Deep
CONDUIT
STEEL
BOXES
CU. IN.
CONDUIT
STEEL
BOXES
STEEL BOX SELECTION CHART
CU. IN.
30.3
21.5
21.0
18.0
15.8
15.5
4" Sq.
2-1/8" Deep
4" Oct.
2-1/8"
4" Sq.
1-1/2" Deep
Switch
3-1/2" Deep
Switch
4" Oct.
2-9/64" Deep 1-1/2" Deep
14.0
12.5
4.0
CABLE
STEEL
BOXES
Switch
Switch
2-3/4" Deep 2-1/2" Deep
3-1/2" Rnd. Pan
1/2" Deep
RACO STEEL BOXES
& COVERS
A8
Calculate The Minimum Size Box
Part (1) of Section 370-16(a) of the
National Electrical Code describes
the detailed way of counting wires,
as well as clamps, fittings or devices
(i.e., switches, receptacles, combination devices) — by establishing an
equivalent conductor value for each.
Those values are added together to
get a total number of conductors.
The minimum size box is the smallest
one in Table 370-16(a) that can
accommodate that number
of conductors.
1. No matter how many ground wires
come into a box, they only count
as one conductor within the box.
2. Any wire running unbroken through
the box counts as one wire.
3. Each wire coming into a splice
device (crimp or twist-on type) is
counted as one wire.
4. Each wire coming into the box and
connecting to a device counts as
one wire of that size.
5. Fixture studs, cable clamps and
hickeys are to be counted as one
regardless of how many there may
be. If a box contains two cable
clamps, the total is only to be
increased by one.
6. Where devices are mounted in the
box, the total conductor count
must be in-creased by two for
each mounting strap.
Example #1: — Conduit Boxes:
Supply power to a switch that will
control a remote light with #14 conductors. Metal conduit and fittings
will be used as the wire way. You
must provide space for four conductors and one switch, totaling 6. Read
across the line “Deductions” in the
Box Fill Table to column 6, then
read down to the minimum cubic
inches required for #14 conductor.
This example requires a minimum of
12.0 cubic inches.
Example #2: — Cable Boxes: This
example will illustrate how the minimum size is determined for a box
with cable clamps fed by two #12-2
nonmetallic sheathed cables and
supplying a 15A duplex receptacle.
After supplying the receptacle, the
conductors are extended to other
outlets.
Circuit conductors
Ground conductors
Cable clamps
Device (receptacle)
4
1
1
2
Total
8
Using the Box Fill Table below,
read across the line ”deductions”
to column 8, then down to the
minimum cubic inches required
for #12 conductor. This example
requires a minimum of 18.0
cubic inches.
B O X F I L L TA B L E
DEDUCTIONS
Volume
Required per
Conductor
Size per
Deductions
6
7
8
9
10
11
12
13
14
#18 (1.50)
9.00
10.50
12.00
13.50
15.00
16.50
18.00
19.50
21.00
#16 (1.75)
10.50
12.25
14.00
15.75
17.50
19.25
21.00
22.75
24.50
#14 (2.00)
12.00
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
#12 (2.25)
13.50
15.75
18.00
20.25
22.50
24.75
27.00
29.25
31.50
#10 (2.50)
15.00
17.50
20.00
22.50
25.00
27.50
30.00
32.50
35.00
#8 (3.00)
18.00
21.00
24.00
27.00
30.00
33.00
36.00
39.00
42.00
#6 (5.00)
30.00
35.00
40.00
45.00
50.00
55.00
60.00
65.00
70.00
A9
B R A C K E T T E C H N I C A L D ATA
BRACKET TYPE
“A”
“B”
“D”
“ FA”
LENGTH
6-7/16"
1-61/64"
6-1/4"
5-1/2"
WIDTH
5/8"
2"
21/32"
2-1/4"
OFFSET
F O R M E TA L
✓
FOR WOOD
✓
✓
✓
✓
✓
✓
“FH”
“FM”
“LB”
“MS”
7-3/8"
6-7/8"
2-3/8"
“J”
1-31/32"
4-1/2"
1-9/16"
1-9/16"
2-23/32"
3-3/64"
1-1/2"
3/8"
3/8"
1/4"
✓
✓
“TS”
7"
✓
✓
✓
✓
“W”
6-25/32"
1-1/16"
1-1/16"
17/64"
1-5/16"
✓
✓
✓
✓
“A” Bracket
“B” Bracket
“D” Bracket
“FA” Bracket
Positions
handy box
against face
and side of
stud. Very rigid.
Face mounts
on front edge
of wood stud.
Use when
space between
studs is limited.
Allows box to
be mounted on
either side of
stud.
Allows box
to be flush
mounted to
stud or joist.
“FH” Bracket
Side-mount
bracket with
hooks that
drive into face
of stud.
“FM” Bracket
Mounts on
flat side of
stud.
“J” Bracket
“LB” Bracket
Spurs, slotted
holes for toenailing. Gauging
notches at 3/8"
and 1/2".
Face mounts
on front edge
of wood stud.
Use when
space between
studs is limited.
5/8" offset to
clear narrow
door molding.
“W” Bracket
BOX-LOC® “MS”
Bracket
Positions box
away from side
of stud to clear
the trim molding
of a door frame.
“TS” Bracket
Side-mount bracket for octagon,
square, switch and handy boxes.
Gauging tabs and recessed nailing
spur. Very rigid.
Positions box
on either side
of stud.
C L A M P T E C H N I C A L D ATA A N D S T U D T Y P E
R A C E WAY T Y P E
CLAMP TYPE
A R M O R E D CA B L E ( B X )
STEEL
ALUMINUM
M E TA L C L A D CA B L E
INTERLOCKING (MCI)
STEEL
ALUMINUM
“ L” T Y P E
N O N M E TA L L I C
S H E AT H E D CA B L E
FLEXIBLE CONDUIT
STEEL
ALUMINUM
3/8” trade size
3/8” trade size
# 1 4 - 2 t o # 1 0 - 3 w / gr o u n d
“X” TYPE
#14-2 (.444 in
outer diam.) to
largest size to
fit in clamp
#14-2 (.444 in
outer diam.) to
largest size to
fit in clamp
.425 to .600
outer diam.
.425 to .600
outer diam.
“ # 9 O R A O L” T Y P E
#14-2 w/ground
“BN” TYPE
# 1 4 - 2 t o # 1 0 - 3 w / gr o u n d
“Q” TYPE
# 1 4 - 2 w / g r o u n d o r # 1 2 - 2 w / gr o u n d
“L” TYPE
“X” TYPE
“#9 OR AOL” TYPE
“BN” TYPE
PLASTER EARS
KNOCKOUTS AND PRIOUTS
1/2"
CONDUIT
KO
3/4"
CONDUIT
KO
“O” TYPE
1"
CONDUIT
KO
7/8"
1-3/32"
TKO
CONDUIT CABLE PRIOUTS
Always in pairs.
KO
FLAT-BOTTOMED
CABLE PRIOUTS
Eliminate chance
of cable being cut.
ONE-SCREW EAR
TWO-SCREW EAR
Adjustable plaster ears are included on
many switch boxes and one octagon
box. They are set forward 1/32".
RACO STEEL BOXES
& COVERS
RACO STEEL BOXES
& COVERS
A10
C E I L I N G FA N S U P P O R T P R O D U C T S
Application
• The RACO® 7120 is a premium
box for rugged new work
or old work ceiling fan and
fixture installations
Product Features
• The 7120 is made of heavy-duty
engineered polycarbonate
• Rated for 70 pound ceiling fan
and fixture support
• Self-gripping wire entry clamps
• Grips the joist for hands free
positioning and installation
• Positioning tabs provide
fast accurate mounting on
studs or joists
• Positioning tabs can easily
be cut off in field for old
work installation
• Designed to accommodate
1/2" thick sheetrock
• Mounting hardware and
instructions included
Compliances
•
– Standard 514-C,
File E104681 and R9320
®
• RACO® 7120 is UL approved
for nonmetallic wiring systems
• Boxes are listed for their Electrical
Applications (Electrical Codes),
UL Green Book
• Boxes are listed for mechanical
properties, including the 2-hour
Fire Rating, (building codes)
UL Orange Book
• Federal Manufacturer’s
number 28488
Reference Data
• Cable clamp U.S. Patent
4,874,905 & 4,605,816;
Canada Patent 1,233,900
• Mounting holes U.S.
Patent 4,580,689; Canada
Patent 1,237,515
• Hex device holes U.S.
Patent 4,666,055; Canada
Patent 1,260,599
• Cat. #7120 U.S. Patent 5,234,119;
Mexico Patent 179,825
SADDLE BOX ™
7120
O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
4" ROUND CEILING FAN AND FIXTURE BOX – SADDLE BOX ™
F O R N O N M E TA L L I C S H E AT H E D C A B L E O R C O N D U I T – 1 2 . 5 C U B I C I N C H E S
RECOMMENDED MAX.
CU.
UPC
C ATA L O G
CABLE
S T D.
S U P P O R T L OA D S
DESCRIPTION
KNOCKOUTS IN.
BAR
NUMBER
CLAMPS
PKG.
C E I L I N G FA N
FIXTURE
C A P.
CODE
( DY N A M I C ) L B S . ( S TAT I C ) L B S .
7120
—
4
2-1/2"
12.5 20*
* P a c k a g e d i n a s t a c k ab l e , i n d i v i d u a l c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
SADDLE BOX™
70
70
A11
1/2", 1-1/2" AND 2-1/8" DEEP
Application
Product Features
• 295-1, 295 include nonmetallic
sheathed cable connector,
mounting hardware, and
instructions
296-1
295
295-1
296
Compliance
•
®
– File E195978
294-1
299
294
4" ROUND CEILING FAN PAN - 1/2" DEEP – DRAWN
WITH CONDUIT KO’S – 6.0 CUBIC INCHES
KNOCKOUTS
C ATA L O G
NUMBER DESCRIPTION
SIDES
CABLE
C O N D.
B OT T O M
C O N D.
M A X . RECOMMENDED
SUPPORT LOADS
STD. U P C
FIXTURE
PKG. BAR CEILING FAN
CODE (DYNAMIC)
(STATIC)
LBS.
LBS.
295-1
—
—
—
4-1/2"
10
295
—
—
—
4-1/2"
10*
—
35
75
35
75
4 " O C TA G O N C E I L I N G FA N B O X – 1 - 1 / 2 " A N D 2 - 1 / 8 " D E E P – D R AW N
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S
M A X . RECOMMENDED
KNOCKOUTS
BOX
SUPPORT LOADS
UPC
C ATA L O G B O X
STD.
VOLUME
SIDES
B OT T O M
BAR CEILING FAN
FIXTURE
N U M B E R D E P T H CU.
PKG.
CODE (DYNAMIC)
(STATIC)
IN.
C A B L E C O N D. C O N D.
LBS.
LBS.
296-1
1-1/2"
15.5
4
2–1/2"
1-1/2"
20
35
75
296
1-1/2"
15.5
4
2–1/2"
1-1/2"
8*
—
35
75
299
2-1/8"
21.5
4
2-1/2"
1-1/2"
6*
35
75
4 " O C TA G O N C E I L I N G FA N B O X – 2 - 1 / 8 " D E E P – D R AW N
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 2 1 . 5 C U B I C I N C H E S
KNOCKOUTS
C ATA L O G D E S C R I P T I O N
NUMBER BRACKET &
SETBACK
SIDES
B OT T O M
CABLE
C O N D.
C O N D.
M A X . RECOMMENDED
SUPPORT LOADS
STD. U P C
FIXTURE
PKG. BAR CEILING FAN
CODE (DYNAMIC)
(STATIC)
LBS.
LBS.
294-1
FA brkt., 1/2"
2
2-1/2"
1-1/2"
10
294
FA brkt., 1/2"
2
2-1/2"
1-1/2"
10*
—
35
35
50
50
REPLACEMENT HARDWARE – FAN MOUNTING SCREWS
C ATA L O G
NUMBER
DESCRIPTION
SHIP
C A R T O N Q T Y.
8994
# 1 0 - 3 2 x 1 - 3 / 8 " r e p l a c e m e n t s c r e w s fo r R A C O ®
catalog numbers 295, 295-1
INNER
PA C K Q T Y.
500*
50
300*
30
250*
25
®
8995
# 1 0 - 3 2 x 2 - 3 / 8 " r e p l a c e m e n t s c r e w s fo r R A C O
catalog numbers 296, 296-1
8996
catalog numbers 294, 294-1, 299
* S o l d i n s h i p c a r t o n q u a n t i t i e s o n ly. H u b b e l l ® R A C O ® d o e s n o t b r e a k c a r t o n q u a n t i t i e s o n t h e s e i t e m s
RACO STEEL BOXES
& COVERS
• RACO® Ceiling Support Boxes
are specifically designed for ceiling
fan and ceiling or wall light fixture
support
RACO STEEL BOXES
& COVERS
A12
NEW
NEW
Brace Applications
• RETRO-BRACE™ is intended
for installations of heavy lighting
fixtures or ceiling paddle fans in
old work or new work applications
934, 935
RETRO-BRACE ™
923, 924
KWIK-BRACE ™
• KWIK-BRACE™ is for new work
installations where the ceiling
sheetrock has not been installed
NEW
NEW
• They are ideal for heavy lighting
fixtures and ceiling paddle fans
RETRO-BRACE™ Product Features
• RETRO-BRACE™ is adjustable
for joist spacing from 16" to 24"
• Simple “tool free” expansion
of brace
• RETRO-BRACE™ has preset
support brackets
• Easy-to-follow instructions and
mounting hardware included
KWIK-BRACE™ Product Features
• KWIK-BRACE™ slides apart to
accommodate joist spacing from
16" to 24"
• Nailing spurs allow for easy
brace positioning
• Outlet box can be positioned
in any location along its length
• Simple fastener for tightening
outlet box and brace
• Easy-to-follow instructions and
mounting hardware included
Concrete Ring Application
• Concrete rings are used with
poured deck (floor) in high-rise
construction
925-928
KWIK-BRACE ™
284
GORILLA-RING ™
REMODELING BRACES FOR LIGHTING FIXTURES OR CEILING FANS – RETRO-BRACE™
W I T H B O X F O R N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S
C ATA L O G
NUMBER
M A X . RECOMMENDED
SUPPORT LOADS
CEILING FAN
FIXTURE
(DYNAMIC)
(STATIC)
LBS.
LBS.
DESCRIPTION
CU. IN.
C A P.
S T D.
PKG.
UPC
BAR CODE
935
1-1/2" Deep Box
Remodeling Kit
15.5
6*
35
50
934
2-1/8" Deep Box
Remodeling Kit
21.5
6*
35
50
NEW CONSTRUCTION BRACES FOR LIGHTING FIXTURES OR CEILING FANS –
K W I K - B R A C E ™ W I T H B O X F O R N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S
MAX. RECOMMENDED
CU.
SUPPORT LOADS
S T D.
UPC
C ATA L O G
D E S C R I P T I O N IN.
NUMBER
PKG.
BAR CODE
CEILING FAN
FIXTURE
CAP.
(DYNAMIC) LBS.
(STATIC) LBS.
923
1/2" Deep box
6.0
18
35
75
924
1/2" Deep box
6.0
6*
35
75
925
1-1/2" Deep box
15.5
12
35
75
926
1-1/2" Deep box
15.5
6*
35
75
927
2-1/8" Deep box
21.5
12
35
75
928
2-1/8" Deep box
21.5
6*
35
75
GORILLA RING™ Product Features
• GORILLA RING™ features
mounting screws that allow
for safe and secure mounting
of any chandeliers, or lighting
fixtures 75 lbs. or less
• Double row of KO’s allow
greater installation flexibility with
a minimum of bends or offsets for
working around reinforcing rods
CONCRETE RING - 4" DEEP – FOR CEILING FAN SUPPORT – GORILLA RING™
C ATA L O G
NUMBER
284
Compliance
•
®
– File E195978
DESCRIPTION
RACO ® 890 or
892 cover must be
ordered separately
KNOCKOUTS
MAX. RECOMMENDED
SUPPORT LOADS
SIDES
B OT T O M C U .
UPC
S T D.
IN.
B A R CEILING FAN
FIXTURE
PKG.
C A B L E C O N D. C O N D. C A P.
C O D E (DYNAMIC)
(STATIC)
LBS.
LBS.
—
Double
row
1/2" &
3/4"
—
49.3
6
—
35
75
REPLACEMENT HARDWARE – FAN MOUNTING SCREWS
C ATA L O G
NUMBER
DESCRIPTION
SHIP
C A R T O N Q T Y.
INNER
PA C K Q T Y.
8994
catalog numbers 923, 924
500*
50
8995
catalog numbers 925, 926, 935
300*
30
8996
catalog numbers 927, 928, 934
250*
25
* S o l d i n s h i p c a r t o n q u a n t i t i e s o n ly. H u b b e l l ® R A C O ® d o e s n o t b r e a k c a r t o n q u a n t i t i e s o n t h e s e i t e m s
A13
C E I L I N G PA N S
1/2" AND 3/4" DEEP – 3-1/2" ROUND
Application
RACO STEEL BOXES
& COVERS
• Ceiling pans are used in the
installation of ceiling or wall
lighting fixtures
• Ceiling pans on this page
are not designed for ceiling
fan support
Product Feature
• Combination screw heads provide
for faster installation
Compliance
•
®
– File E195978
703
287
292, 8292
3-1/2" ROUND PAN – 1/2" DEEP – DRAWN
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 4 . 0 C U B I C I N C H E S
MAX. RECOMMENDED
KNOCKOUTS
SUPPORT LOADS
UPC
C ATA L O G
S T D.
DESCRIPTION
SIDES
B OT T O M
BAR
CEILING FAN FIXTURE
NUMBER
PKG.
CODE
(DYNAMIC)
(STATIC)
LBS.
LBS.
292
Round ceiling pan 4 priouts
—
1-1/2"
50
8292
—
1-1/2"
50
—
No
50
No
50
3-1/2" ROUND PAN – 3/4" DEEP – DRAWN
MAX. RECOMMENDED
KNOCKOUTS
SUPPORT LOADS
UPC
C ATA L O G
S T D.
DESCRIPTION
SIDES
B OT T O M
BAR
CEILING FAN FIXTURE
NUMBER
PKG.
CODE
(DYNAMIC)
(STATIC)
LBS.
LBS.
287
—
1-1/2"
50
—
No
50
3-1/2" ROUND COVER
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
703
8703-5
Flat, 1/2" KO in center
100
Flat, 1/2" KO in center
50*
UPC
BAR CODE
*5 Bundles of 10
3-1/2" ROUND PAN
DIMENSIONS
C ATA L O G N U M B E R
A
B
292, 8292
9/16"
3-3/8"
287
3/4"
3-3/8"
A14
C E I L I N G PA N S
1/2" DEEP – 4" ROUND
RACO STEEL BOXES
& COVERS
Applications
• Ceiling pans are used in the
lighting fixtures
• RACO 293 and 8293 are not
designed for ceiling fan support
Product Features
• 295-1, 295 include nonmetallic
sheathed cable connector, mounting
hardware, and instructions
• Lock-washers on 295, 295-1
prevent the high-strength, hardened
screws from loosening from vibration
293, 8293
295-1
295
Compliance
•
®
– File E195978
4" ROUND CEILING FAN AND FIXTURE PAN – 1/2" DEEP – DRAWN
KNOCKOUTS
C ATA L O G
NUMBER DESCRIPTION
SIDES
B OT T O M
C O N D.
C O N D.
M A X . RECOMMENDED
SUPPORT LOADS
S T D. U P C
CEILING FAN
FIXTURE
PKG. BAR
C O D E (DYNAMIC)
(STATIC)
LBS.
LBS.
293
Rnd. ceiling pan
—
5-1/2"
50
8293
Rnd. ceiling pan
—
5-1/2"
50
295-1
—
—
4-1/2"
10
295
—
—
4-1/2"
10*
—
—
No
50
No
50
35
75
35
75
4" ROUND PAN
DIMENSIONS
C ATA L O G
NUMBER
A
B
293, 8293
4"
9/16"
295, 295-1
4"
9/16"
A15
O C TA G O N B O X E S
1-1/2" DEEP
Applications
RACO STEEL BOXES
& COVERS
• Octagon boxes can be used
in the installation of ceiling or
wall lighting fixtures
• Extension rings provide a
means for adding additional
cubic capacity or as an outlet
box for surface conduit
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the
front of this catalog for complete
description of bracket types and
features
Compliance
•
– File E195978
®
112
110
119
111
3 - 1 / 2 " O C TA G O N B O X – 1 - 1 / 2 " D E E P – D R AW N
KNOCKOUTS
DESCRIPTION
C ATA L O G B R A C K E T &
SIDES
B OT T O M
N U M B E R SETBACK
C O N D.
C O N D.
110
—
4-1/2"
M A X . RECOMMENDED
UPC
S UPPORT LOADS
S T D. B A R CEILING FAN
FIXTURE
P K G . C O D E (DYNAMIC)
(STATIC)
LBS.
LBS.
1-1/2"
50
No
50
3 - 1 / 2 " O C TA G O N B O X – 1 - 1 / 2 " D E E P – D R AW N
KNOCKOUTS
M A X . RECOMMENDED
DESCRIPTION
SIDES
B OT T O M
UPC
S UPPORT LOADS
S T D. B A R
CEILING FAN
FIXTURE
N U M B E R SETBACK
C A B L E C O N D.
C O N D.
(STATIC)
LBS.
LBS.
112
—
4
2-1/2"
1-1/2"
50
—
No
50
119
TS brkt., 1/2"
4
1-1/2"
1-1/2"
25
—
No
50
3 - 1 / 2 " O C TA G O N E X T E N S I O N R I N G – 1 - 1 / 2 " D E E P – D R AW N
C ATA L O G
NUMBER
111
3-1/2" OCTAGON BOXES
4"
3/
2-
DESCRIPTION
BRACKET &
SETBACK
Extension ring
KNOCKOUTS
SIDES
C O N D.
B OT T O M
C O N D.
4-1/2"
—
UPC
BAR
CODE
S T D.
PKG.
25
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
D
E
110
3-7/16"
1-9/16"
—
—
—
112
3-7/16"
1-9/16"
—
—
—
119
3-7/16"
1-9/16"
7-5/32"
1/2"
1-1/4"
111
3-7/16"
1-9/16"
—
—
—
A16
1-1/2" DEEP
RACO STEEL BOXES
& COVERS
Application
• Octagon boxes are used in
the installation of ceiling or wall
lighting fixtures
Product Features
126
125, 8125
127, 8127
• RACO offers a variety of labor
®
features
161
158
Compliance
•
®
– File E195978
4 " O C TA G O N B O X – 1 - 1 / 2 " D E E P – D R AW N
C ATA L O G
NUMBER
4" OCTAGON
DESCRIPTION
BRACKET &
SETBACK
KNOCKOUTS
SIDES
B OT T O M
C O N D.
C O N D.
S T D.
PKG.
UPC
BAR
CODE
—
125
—
4-1/2"
5-1/2"
50
8125
—
4-1/2"
5-1/2"
50
50
126
—
4-3/4"
3-1/2"
2-3/4"
127
—
2-1/2"
2-3/4"
3-1/2",
2-3/4"
50
3-1/2",
2-3/4"
M A X . RECOMMENDED
SUPPORT LOADS
CEILING FAN
FIXTURE
(DYNAMIC)
(STATIC)
LBS.
LBS.
No
50
No
50
—
No
50
—
No
50
8127
—
2-1/2"
2-3/4"
50
No
50
158
J brkt., 3/8" or 1/2"
4 –1/2"
5-1/2"
50
No
50
161
TS brkt., 1/2"
3-1/2"
5-1/2"
50
No
50
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
D
E
F
125, 8125
4"
1-9/16"
—
—
—
—
126
4"
1-9/16"
—
—
—
—
127, 8127
4"
1-9/16"
—
—
—
—
158
4"
1-9/16"
—
1/2"
—
3-1/8"
161
4"
1-9/16"
7-5/32"
1/2"
1-1/4"
—
A17
1-1/2" DEEP
Applications
• Extension rings provide a means
for adding additional cubic
capacity or as an outlet box for
surface conduit
128, 8128
324
130
146, 8146
Product Features
features
• Fixture bar hanger allows box to
be located anywhere along length
of bar
• RACO® 324 includes a 3/8"
trade sized stud to accommodate
fixture stem
Compliances
•
•
®
– File LR-1082 (128, 8128, 130)
164, 8164
160, 8160
4 " O C TA G O N E X T E N S I O N R I N G S – 1 - 1 / 2 " D E E P – D R AW N
DESCRIPTION
BRACKET &
SETBACK
C ATA L O G
NUMBER
SIDES
C O N D.
KNOCKOUTS
B OT T O M
C O N D.
S T D.
PKG.
UPC
BAR
CODE
—
128
Extension ring
4-1/2"
—
50
8128
Extension ring
4-1/2"
—
25
130
Extension ring
2-1/2", 2-3/4"
—
50
4 " O C TA G O N W I T H B A R H A N G E R – 1 - 1 / 2 " D E E P – D R AW N
KNOCKOUTS
– File E195978
®
150
145
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
324
3/8" Stud, adj.
14 -1/4" to 22-1/2"
SIDES
C O N D.
4-1/2"
B OT T O M
C O N D.
4-1/2"
M A X . RECOMMENDED
UPC
SUPPORT LOADS
FIXTURE
(STATIC)
LBS.
LBS.
25
No
10*
*UL Rated at 50 lbs.
4" OCTAGON BOXES
KNOCKOUTS
DESCRIPTION
SIDES
B OT T O M
N U M B E R SETBACK
C A B L E C O N D.
C O N D.
M A X . RECOMMENDED
UPC
SUPPORT LOADS
FIXTURE
(STATIC)
LBS.
LBS.
146
—
4
2-1/2"
1-1/2"
50
8146
—
4
2-1/2"
1-1/2"
50
145
Side holes,
1/8" & 1/4"
4
2-1/2"
1-1/2"
50
150
Ears
4
2-1/2"
1-1/2"
50
160
J brkt., 3/8"
or 1/2"
4
2-1/2"
1-1/2"
50
8160
J brkt., 3/8"
or 1/2"
4
2-1/2"
1-1/2"
50
164
TS brkt., 1/2"
4
1-1/2"
1-1/2"
50
8164
TS brkt., 1/2"
4
1-1/2"
1-1/2"
50
—
—
—
—
No
50
No
50
No
50
No
50
No
50
No
50
No
50
No
50
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
D
E
F
146, 8146
4"
1-9/16"
—
—
—
—
145
4"
1-9/16"
—
—
—
—
150
4"
1-9/16"
—
—
—
—
160, 8160
4"
1-9/16"
—
1/2"
—
3-1/8"
164, 8164
4"
1-9/16"
7-5/32"
1/2"
1-1/4"
—
RACO STEEL BOXES
& COVERS
lighting fixtures
A18
1-1/2" DEEP
• Octagon boxes are used in the
lighting fixtures
Product Features
296
296-1
features
326, 8326
153
157
155
of bar
• RACO® 326, 8326 includes 3/8"
trade sized stud to accommodate
fixture stem
4 " O C TA G O N C E I L I N G FA N A N D F I X T U R E B O X – 1 - 1 / 2 " D E E P – D R AW N
• RACO® 296, 296-1 ceiling
fan boxes have lock-washers
to prevent the high-strength,
hardened screws from loosening
from vibration
• 296, 296-1 include mounting
hardware and instructions
Compliance
•
®
– File E195978
4" OCTAGON BOXES
31/
2"
RACO STEEL BOXES
& COVERS
Application
DESCRIPTION
BRACKET &
SETBACK
C ATA L O G
NUMBER
KNOCKOUTS
SIDES
B OT T O M
C A B L E C O N D.
C O N D.
M A X . RECOMMENDED
SUPPORT LOADS
S T D. U P C
FIXTURE
PKG. B A R CEILING FAN
C O D E (DYNAMIC)
(STATIC)
LBS.
LBS.
296-1
—
4
2-1/2"
1-1/2"
20
296
—
4
2-1/2"
1-1/2"
8*
—
35
75
35
75
* P a c k a g e d i n a s t a c k ab l e , c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
4 " O C TA G O N W I T H B A R H A N G E R – 1 - 1 / 2 " D E E P – D R AW N
KNOCKOUTS
DESCRIPTION
SIDES
B OT T O M
BRACKET &
SETBACK
C A B L E C O N D.
C O N D.
C ATA L O G
NUMBER
M A X . RECOMMENDED
UPC
SUPPORT LOADS
S T D. B A R
CEILING FAN
FIXTURE
PKG. C O D E (DYNAMIC)
(STATIC)
LBS.
LBS.
326
3/8" Stud, adj.
14-1/4" to 22-1/2"
4
2-1/2"
—
25
8326
3/8" Stud, adj.
14-1/4" to 22-1/2"
4
2-1/2"
—
25
—
No
10*
No
10*
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 5 . 5 C U B I C I N C H E S
C ATA L O G
NUMBER
KNOCKOUT
DESCRIPTION
SIDES
B OT T O M
BRACKET &
SETBACK
C A B L E C O N D.
C O N D.
UPC
S T D. B A R
PKG. C O D E
M A X . RECOMMENDED
SUPPORT LOADS
CEILING FAN
FIXTURE
(DYNAMIC)
(STATIC)
LBS.
LBS.
No
50
153
—
4
2-1/2"
1-1/2"
25
155
TS brkt., 1/2"
4
1-1/2"
1-1/2"
50
No
50
157
J brkt., 3/8"
or 1/2"
4
2-1/2"
1-1/2"
50
No
50
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
D
E
F
296, 296-1
4"
1-9/16"
—
—
—
—
153
4"
1-9/16"
—
—
—
—
155
4"
1-9/16"
7-5/32"
1/2"
1-1/4"
—
157
4"
1-9/16"
—
1/2"
—
3-1/8"
A19
1-1/2" AND 2-1/8" DEEP
Application
RACO STEEL BOXES
& COVERS
lighting fixtures
Product Features
of bar
165
325, 8325
• RACO® 325, 8325 box includes
3/8" trade sized stud to
accommodate fixture stem
Compliance
•
®
4" OCTAGON BOXES
299
167
166
– File E195978
4 " O C TA G O N B O X W I T H B A R H A N G E R – 1 - 1 / 2 " D E E P – D R AW N
DESCRIPTION
NUMBER SETBACK
KNOCKOUTS
SIDES
B OT T O M
CABLE
C O N D.
C O N D.
M A X . RECOMMENDED
UPC
SUPPORT LOADS
FIXTURE
P K G . CODE (DYNAMIC)
(STATIC)
LBS.
LBS.
325
3/8" Stud, adj.
14-1/4" – 22-1/2"
4
2-1/2"
—
25
8325
3/8" Stud, adj.
14-1/4" – 22-1/2"
4
2-1/2"
—
25
—
No
10*
No
10*
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
165
—
KNOCKOUTS
SIDES
B OT T O M
UPC
BAR
CODE
M A X . RECOMMENDED
SUPPORT LOADS
CEILING FAN
FIXTURE
(DYNAMIC)
(STATIC)
LBS.
LBS.
C O N D.
C O N D.
S T D.
PKG.
4-1/2"
5-1/2"
50
—
No
50
50
—
No
50
50
No
50
166
—
4-3/4"
3-1/2"
2-3/4"
167
—
2-1/2",
2-3/4"
2-3/4"
3-1/2"
DESCRIPTION
NUMBER SETBACK
299
—
KNOCKOUTS
SIDES
B OT T O M
C O N D.
4"
CABLE
C O N D.
2-1/2"
1-1/2"
M A X . RECOMMENDED
UPC
SUPPORT LOADS
FIXTURE
P K G . CODE (DYNAMIC)
(STATIC)
LBS.
LBS.
50
—
No
50
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
D
E
F
165
4"
2-1/8"
—
—
—
—
166
4"
2-1/8"
—
—
—
—
167
4"
2-1/8"
—
—
—
—
299
4"
2-1/8"
—
—
—
—
A20
2-1/8" DEEP
• Octagon boxes are used in the
lighting fixtures
Product Features
175
features
• RACO® 294, 294-1 ceiling
fan boxes have lock-washers
to prevent the high strength,
hardened screws from loosening
from vibration
Compliance
•
®
177
294-1
176
294
DESCRIPTION
NUMBER SETBACK
KNOCKOUTS
SIDES
B OT T O M
UPC
S T D. B A R
P K G . CODE
– File E195978
175
—
4
2-1/2"
1-1/2"
50
177
TS brkt., 1/2"
4
1-1/2"
1-1/2"
25
176
J brkt., 5/8"
4
2-1/2"
1-1/2"
25
—
M A X . RECOMMENDED
SUPPORT LOADS
CEILING FAN
FIXTURE
(DYNAMIC)
(STATIC)
LBS.
LBS.
No
50
No
No
50
50
4 " O C TA G O N C E I L I N G FA N A N D F I X T U R E B O X – 2 - 1 / 8 " D E E P – D R AW N
M A X . RECOMMENDED
KNOCKOUTS
SUPPORT LOADS
C ATA L O G D E S C R I P T I O N
S T D. U P C
B
R
A
C
K
E
T
&
S
I
D
E
S
B
A
R
CEILING FAN
FIXTURE
NUMBER
B OT T O M
PKG.
SETBACK
CODE (DYNAMIC)
(STATIC)
LBS.
LBS.
294-1
FA brkt., 1/2"
2
2-1/2"
1-1/2"
10
294
FA brkt., 1/2"
2
2-1/2"
1-1/2"
10*
—
35
75
35
75
E
F
—
* P a c k a g e d i n a s t a c k ab l e , c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
4" OCTAGON BOXES
DIMENSIONS
1/
2"
C ATA L O G
NUMBER
3-
RACO STEEL BOXES
& COVERS
Application
A
B
C
D
175
4"
2-1/8"
—
—
—
177
4"
2-1/8"
7-5/32"
1/2"
1-1/4"
—
176
4"
2-1/8"
—
1/2"
—
3-1/8"
294, 294-1
4"
2-1/8"
5-1/2"
1/2"
2-1/4"
—
A21
O C TA G O N A N D R O U N D C O V E R S
Applications
• Switches or receptacles may be
installed into octagon boxes by
using covers 729 or 731
722, 8722, 8722-5
724, 8724, 8724-5
729
5652-1
5653-1
731, 8731-5
• Raised covers are used for
mounting lighting fixtures
• 5" Round closure plates are
designed for use in dry locations
for closure at unused ceiling
outlets
Product Features
727, 732, 737
5654-1
• Rugged metallic construction
• 5" Round covers feature stateof-the-art powder coat paint finish
which provides a light texture finish
and scratch resistance
Compliances
•
•
– File E195978
®
®
– File LR-1082 (722, 729, 731)
ROUND CLOSURE PLATES
CAT. NO. 5652-1
CAT. NO. 5654-1
CAT. NO. 5653-1
4 " O C TA G O N A N D R O U N D C O V E R S
C ATA L O G
NUMBER
DESCRIPTION
C U . S T D.
IN. PKG.
UPC
BAR
CODE
—
MAX. RECOMMENDED
CEILING FAN
FIXTURE
(DYNAMIC)
(STATIC)
LBS.
LBS.
722
Flat, blank
—
100
8722
Flat, blank
—
100
8722-5
Flat, blank
—
724
F l a t , 1/ 2 " K O
—
100
8724
F l a t , 1/ 2 " K O
—
100
No
No
8724-5
F l a t , 1/ 2 " K O
—
50*
No
No
729
Flat, toggle switch
—
50
No
No
731
Flat, duplex receptacle
—
50
No
No
8731-5
Flat, duplex receptacle
—
50*
No
No
737
R a i s e d 1/ 2 ", o p e n , e a r s 2 - 3 / 4 " O . C .
3.0
50
No
50
727
R a i s e d 5 / 8", o p e n , e a r s 2 - 3 / 4 " O . C .
3.8
100
—
No
50
732
R a i s e d 1", o p e n , e a r s 2 - 3 / 4 " O . C .
6.5
25
—
No
50
50*
—
No
No
No
No
No
No
No
No
*5 Bundles of 10
5 " R O U N D S T E E L C L O S U R E P L AT E S
C ATA L O G
NUMBER
COLOR
DESCRIPTION
PKG.
TYPE
S T D.
PKG.
5652-1
Off-white
Screw & universal
mount strap
Shrink
10
5653-1
Off-white
(2) 8-3 2 screws, direct
mount to fixture outlet box
Shrink
10
Off-white
Fixture stud & universal
mount strap
Shrink
10
5654-1
UPC
BAR CODE
RACO STEEL BOXES
& COVERS
• Covers are used to close an
outlet box
A22
4" SQUARE BOXES
1-1/4" AND 1-1/2" DEEP
RACO STEEL BOXES
& COVERS
Applications
• Boxes are installed in ceilings
or walls for lighting fixtures,
switches or receptacles
• Square boxes are used where
multiple conductor runs are split
into two or more directions to
bring power to a number of
electrical devices
185
191, 8191
190, 8190
• Drawn boxes are ideal for exposed
work applications
Product Features
192, 8192
• Thru-the-wall box is designed for
shallow wall applications and
allows for attachment of wall
plate to both faces of box
4" SQUARE – 1-1/4" DEEP – DRAWN
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
• TKO® knockouts offer greater
flexibility with RACO® patented
combination 1/2" and 3/4"
knockout
185
• TKO® knockouts allow for
design and installation flexibility
®
– File E195978
All RACO single gang, two
gang, 4" square, and single
gang gangable U.L. listed steel
boxes are acceptable for use
in 2-hour fire rated walls. For
additional information, consult
U.L. “Fire Resistance Directory”
or the U.L. website at www.ul.com
®
5-1/2"
Per U.L. 514-A, suitable for use
without a bonding jumper in circuits
above or below 250 volts
S T D.
PKG.
UPC
BAR
CODE
—
190
—
1 2 - 1/ 2 "
5-1/2"
50
8190
—
1 2 - 1/ 2 "
5 - 1/ 2 "
50
191
—
8 - 3/ 4 "
1 - 1/ 2 ", 4 - 3 / 4 "
50
8191
—
192
—
8192
—
—
8 - 1/ 2 "
4 - 3/ 4 "
—
8-1/2"
4-TKO®
250V
189
—
250V
8189
—
—
181
—
8-3/4"
—
—
25
3 - 1/ 2 ", 2 - 3 / 4 "
—
50
—
50
3-1/2", 2-TKO®
—
S T D.
PKG.
UPC
BAR
CODE
50
—
50
1-1/2", 4-3/4"
4" SQUARE – THRU-THE-WALL BOX – 1-1/2"
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
204
—
8 -1/ 2 ", 4 -3/ 4 "
—
UPC
BAR
CODE
50
4" SQUARE – 1-1/2" DEEP – WELDED
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
250V
4" SQUARE BOXES
10-1/2"
—
S T D.
PKG.
4" SQUARE – 1-1/2" DEEP – DRAWN
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
Compliances
•
204
181
189, 8189
50
—
DEEP – DRAWN
CU.
IN.
S T D.
PKG.
UPC
BAR
CODE
21
50
—
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
185
1-1/2"
—
—
190, 8190
1-1/2"
—
—
191, 8191
1-1/2"
—
—
192, 8192
1-1/2"
—
—
189, 8189
1-1/2"
—
—
181
1-1/2"
—
—
204
1-1/2"
—
—
A23
4" SQUARE BOXES
1-1/2" DEEP
Applications
RACO STEEL BOXES
& COVERS
electrical devices
193
208, 8208
197,
8197
Product Features
196, 8196
features
• BOX-LOC® (MS) Bracket Box is
a snap to install. Place the bracket
on the open side of the stud first.
Slots in the bracket engage the lip
of the stud and actually crimp it as
you press the bracket on the stud.
Barbed hooks dig into the flat side
of the stud, quickly locking it
into place
combination 1/2" and
3/4" knockout
199
227 BOX-LOC ®
4" SQUARE BRACKETED BOXES – 1-1/2" DEEP – WELDED
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
KNOCKOUTS
SIDES
B OT T O M
C O N D.
C O N D.
S T D.
PKG.
UPC
BAR
CODE
—
250V
197
FH, flush
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
25
250V
8197
FH, flush
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
25
250V
208
W, f l u s h
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
25
250V
8208
W, f l u s h
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
25
250V
193
B, flush
6 - 1/ 2 ", 4 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
25
—
250V
196
FM, flush
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
25
—
250V
8196
FM, flush
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
25
199
FM, flush
6 - 3/ 4 "
25
227
BOX-LOC® (MS)
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ®
flush
250V
1 - 1/ 2 ", 4 - 3/ 4 "
—
—
25
DIMENSIONS
C ATA L O G
NUMBER
A
Compliances
197, 8197
1-1/2"
7-3/8"
4-3/8"
•
208, 8208
1-1/2"
6-13/16"
5-15/16"
193
1-1/2"
2"
6"
196, 8196
1-1/2"
6-7/8"
4-3/8"
199
1-1/2"
6-7/8"
4-3/8"
227
1-1/2"
4-5/8"
5-1/2"
®
– File E195978
All RACO® single gang, two
250V
4" SQUARE BOXES
B
C
A24
4" SQUARE BOXES
1-1/2" DEEP
RACO STEEL BOXES
& COVERS
Applications
electrical devices
224
219
213
Product Features
218, 8218
description of bracket types
and features
• BOX-LOC® (MS) Bracket Box
is a snap to install. Place the
bracket on the open side of the
stud first. Slots in the bracket
engage the lip of the stud and
actually crimp it as you press
the bracket on the stud. Barbed
hooks dig into the flat side of the
stud, quickly locking it in place
• Combination screw heads
provide for faster installation
3/4" knockout
• TKO knockouts allow for
®
229 BOX-LOC ®
C ATA L O G
NUMBER
250V
250V
250V
213
219
224
DESCRIPTION
KNOCKOUTS
BRACKET &
SIDES
B OT T O M
SETBACK
C A B L E C O N D.
C O N D.
4 - 1/ 2 ",
—
4
1 - 1/ 2 "
2 – TKO®
FH, flush
B, flush
S T D.
PKG.
UPC
BAR
CODE
50
—
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
—
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
—
1 - 1/ 2 "
25
—
250V
218
FM, flush
4
2 - 1/ 2 ",
1 – TKO®
250V
8218
FM, flush
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
229
BOX-LOC®
(MS) flush
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
250V
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
213
1-1/2"
—
—
Compliances
218
1-1/2"
6-7/8"
4-3/8"
•
219
1-1/2"
7-3/8"
4-3/8"
224
1-1/2"
2"
6"
229
1-1/2"
4-5/8"
5-1/2"
®
– File E195978
250V
4" SQUARE BOXES
A25
4" SQUARE BOXES
1-1/2" DEEP
Applications
electrical devices
211, 8211
220, 8220
225
Product Features
223
and features
actually crimp it as you press
the bracket on the stud. Barbed
hooks dig into the flat side of the
stud, quickly locking it in place
3/4" knockout
Compliances
•
®
– File E195978
250V
228 BOX-LOC ®
250V
250V
KNOCKOUTS
DESCRIPTION
C ATA L O G
S T D.
BRACKET &
SIDES
B OT T O M
NUMBER
PKG.
SETBACK
C A B L E C O N D.
C O N D.
4 - 1/ 2 ",
211
—
4
1 - 1/ 2 "
50
2 – TKO®
8211
—
4
4 - 1/ 2 ",
2 – TKO®
1 - 1/ 2 "
50
1 - 1/ 2 "
25
250V
220
FH, flush
4
2 - 1/ 2 ",
1 – TKO®
250V
8220
FH, flush
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
250V
250V
225
223
B, flush
FM, flush
®
250V
228
BOX-LOC
(MS) flush
UPC
BAR
CODE
—
—
—
DIMENSIONS
C ATA L O G
NUMBER
A
211, 8211
1-1/2"
—
—
220, 8220
1-1/2"
7-3/8"
4-3/8"
225
1-1/2"
2"
6"
223
1-1/2"
6-7/8"
4-3/8"
228
1-1/2"
4-5/8"
5-1/2"
4" SQUARE BOXES
B
C
RACO STEEL BOXES
& COVERS
A26
4" SQUARE BOXES
2-1/8" DEEP
ING
COM ON
SO
RACO STEEL BOXES
& COVERS
Applications
electrical devices
244
232, 8232
233, 8233
231, 8231
NEW
Product Features
NEW
235, 8235
1/2" & 3/4" TKO ®
and features
actually crimp it as you press the
bracket on the stud. Barbed hooks
dig into the flat side of the stud,
quickly locking it in place
237
236
238
BOX-LOC ®
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
KNOCKOUTS
SIDES
B OT T O M
C O N D.
C O N D.
S T D.
PKG.
UPC
BAR
CODE
—
250V
232
—
8 - 1/ 2 ", 4 - T K O ® 3 - 1/ 2 ", 2 - T K O ®
25
250V
8232
—
8 - 1/ 2 ", 4 - T K O ® 3 - 1/ 2 ", 2 - T K O ®
25
231
—
8 -3/ 4 "
1 - 1/ 2 ", 4 - 3/ 4 "
25
8231
—
8 -3/ 4 "
1 - 1/ 2 ", 4 - 3/ 4 "
25
233
—
8-1"
3 - 1/ 2 ", 2 - 3/ 4 "
25
8233
—
8-1"
3 - 1/ 2 ", 2 - 3/ 4 "
25
250V
235
TS, flush
6 - 1/ 2 ", 3 - T K O ® 3 - 1/ 2 ", 2 - T K O ®
25
250V
8235
TS, flush
6 - 1/ 2 ", 3 - T K O ® 3 - 1/ 2 ", 2 - T K O ®
25
236
FM, flush
6 - 3/ 4 "
25
3/4" knockout
250V
237
FM, flush
8 - 1/ 2 ", 4 - T K O ® 3 - 1/ 2 ", 2 - T K O ®
238
BOX-LOC®
(MS) flush
250V
1 - 1/ 2 ", 4 - 3/ 4 "
8 - 1/ 2 ", 4 - T K O
®
3 - 1/ 2 ", 2 - T K O
®
—
—
—
25
25
4" SQUARE - 2-1/8" DEEP - DRAWN
WITH CONDUIT KO’S - 30.3 CUBIC INCHES
• TKO knockouts allow for
®
C ATA L O G
NUMBER
Compliances
•
®
– File E195978
250V
250V
KNOCKOUTS
DESCRIPTION
BRACKET &
SETBACK
244
—
SIDES
C O N D.
8-1/2”, 4-TKO
S T D.
PKG.
B OT T O M
C O N D.
2-1/2”, 2-3/4"
UPC
BAR
CODE
25
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
232, 8232
2-1/8"
—
—
231, 8231
2-1/8"
—
—
233, 8233
2-1/8"
—
235, 8235
2-1/8"
7-5/32"
4-5/16"
236
2-1/8"
7-5/8"
4-3/8"
238
2-1/8"
4-5/8"
5-1/2"
244
2-1/8"
—
—
4" SQUARE BOXES
—
A27
4" SQUARE BOXES
1 - 1 / 2 " A N D 2 - 1 / 8 " D E E P, P L E N U M B O X E S
Applications
RACO STEEL BOXES
& COVERS
• Plenum boxes are used in aboveceiling applications where air-tight
enclosures are required
electrical devices
Product Features
• To maintain plenum seal, both
RACO® 226 and 239 do not
provide ground screw holes
226
239
762
• Cover gasket is PVC foam material
Compliance
•
®
– File E195978
4" SQUARE PLENUM – BOXES & COVER – 1-1/2" & 2-1/8" DEEP – DRAWN
WITH CONDUIT KO’S
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
KNOCKOUTS
B OT T O M
1 - 1/ 2 " D e e p
8 - 1/ 2 "
4 - 3/ 4 "
3 - 1/ 2 "
2 - 3/ 4 "
21.0
50
—
239
2 - 1/ 8 " D e e p
8 - 1/ 2 "
4 - 3/ 4 "
3 - 1/ 2 "
2 - 3/ 4 "
30.3
25
—
762
G a s k e t e d c o v e r fo r
4" square boxes
—
—
—
50
—
226
SIDES
S T D.
PKG.
UPC
BAR
CODE
CU.
IN.
4" SQUARE BOXES
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
226
1-1/2"
—
—
239
2-1/8"
—
—
A28
4" SQUARE BOXES
2-1/8" DEEP
RACO STEEL BOXES
& COVERS
Applications
• Boxes are installed in ceilings or
walls for lighting fixtures, switches
or receptacles
electrical devices
240, 8240
242
241, 8241
NEW
Product Features
243
BOX-LOC®
and features
quickly locking it in place
248
4" SQUARE – 2-1/8" DEEP
C ATA L O G
NUMBER
250V
242
DESCRIPTION
KNOCKOUTS
BRACKET &
SIDES
B OT T O M
SETBACK
C A B L E C O N D.
C O N D.
4 - 1/ 2 ",
—
4
1 - 1/ 2 "
2 – TKO®
250V
240
TS, flush
4
2 - 1/ 2 ",
1 – TKO®
250V
8240
TS, flush
4
2 - 1/ 2 ",
1 – TKO®
S T D.
PKG.
UPC
BAR
CODE
25
—
—
1 - 1/ 2 "
25
1 - 1/ 2 "
25
4" SQUARE – 2-1/8" DEEP
3/4" knockout
C ATA L O G
NUMBER
Compliances
•
®
– File E195978
250V
241
DESCRIPTION
KNOCKOUTS
BRACKET &
SIDES
B OT T O M
SETBACK
C A B L E C O N D.
C O N D.
2 - 1/ 2 ",
TS, flush
4
1 - 1/ 2 "
1 – TKO®
UPC
BAR
CODE
25
—
8241
TS, flush
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
250V
243
BOX-LOC®
(M S ) f l u s h
4
2 - 1/ 2 ",
1 – TKO®
1 - 1/ 2 "
25
250V
248
—
4
4 - 1/ 2 ",
2 – TKO®
1 - 1/ 2 "
25
250V
DIMENSIONS
C ATA L O G
NUMBER
A
B
2-1/8"
240, 8240
2-1/8"
7-7/32"
4-5/16"
241, 8241
2-1/8"
7-5/32"
4-5/16"
243
2-1/8"
4-5/8"
5-1/2"
248
2-1/8"
—
—
4" SQUARE BOXES
—
C
242
250V
S T D.
PKG.
—
A29
4" SQUARE COVERS
Applications
RACO STEEL BOXES
& COVERS
outlet box
• Raised device covers are used for
mounting switches or receptacles
Product Feature
752, 8752,
8752-5
• Angled mounting slots compensate
up to 12° for box misalignment
756-759, 767,
8756, 8767
753, 8753,
8753-5
Compliances
•
•
®
– File E195978
– File LR-1082
787, 8787
772
768, 771, 773-775,
782, 8768-8782
785-786
4" SQUARE COVERS
C ATA L O G
NUMBER
DESCRIPTION
CU.
IN.
S T D.
PKG.
752
Flat, blank
—
50
8752
Flat, blank
—
50
8752-5
Flat, blank
—
50*
753
F l a t , 1/ 2 " K O i n c e n t e r
—
50
8753
F l a t , 1/ 2 " K O i n c e n t e r
—
50
8753-5
F l a t , 1/ 2 " K O i n c e n t e r
—
50*
767
3.0
25
8767
3.0
25
756
4.0
100
8756
4.0
759
757
R a i s e d 1", o p e n , e a r s 2 - 3 / 4 " O . C .
758
UPC
BAR
CODE
—
—
MAX. RECOMMENDED
CEILING FAN
FIXTURE
(DYNAMIC)
(STATIC)
LBS.
LBS.
No
No
No
No
No
No
No
No
No
No
No
No
No
50
No
50
No
50
100
No
50
5.0
25
No
50
6.8
25
No
50
R a i s e d 1 -1/ 4 ", o p e n , e a r s 2 - 3 / 4 " O . C . 8 . 5
25
No
50
—
—
—
*5 Bundles of 10
4 " S Q U A R E C O M B I N AT I O N – D E V I C E A N D T I L E C O V E R S – S I N G L E D E V I C E
C ATA L O G
NUMBER
DESCRIPTION
CU.
IN.
S T D.
PKG.
UPC
BAR CODE
—
787
Flat
—
50
8787
Flat
—
50
771
R a i s e d 1/ 4 "
1.5
100
8771
R a i s e d 1/ 4 "
1.5
25
772
R a i s e d 1/ 2 ", d r a w n
3.5
100
8772
R a i s e d 1/ 2 ", d r a w n
3.5
50
782
R a i s e d 1/ 2 ", t i l e
3.5
25
8782
R a i s e d 1/ 2 ", t i l e
3.5
25
768
R a i s e d 5 / 8"
4.5
50
8768
R a i s e d 5 / 8"
4.5
50
773
R a i s e d 3 / 4"
5.5
50
8773
R a i s e d 3 / 4"
5.5
50
774
Raised 1"
7.5
25
775
R a i s e d 1 -1/ 4 "
9.5
25
8775
R a i s e d 1 -1/ 4 "
9.5
25
785
R a i s e d 1 -1/ 2 "
11.3
25
—
786
Raised 2"
14.5
25
—
—
—
—
—
—
—
A30
4 " S Q U A R E C O V E R S A N D PA R T I T I O N S
RACO STEEL BOXES
& COVERS
Applications
outlet box
Product Feature
up to 12° for box misalignment
Low Voltage Partitions
Applications
• Low voltage partitions may be
added to conduit-type boxes to
divide power from voice/data
777-781, 769,
8769-8781
791
708
795, 796
• Must be used with raised covers
Product Features
• Partition divides 4" square boxes
into two compartments
• Use with two-device covers which
have a slot for the partition
4 " S Q U A R E C O M B I N AT I O N D E V I C E A N D T I L E C O V E R S T W O D E V I C E
C ATA L O G
NUMBER
CU.
IN.
DESCRIPTION
UPC
BAR CODE
791
Flat
777
R a i s e d 1/ 4 ", d r a w n
3.0
50
—
778
R a i s e d 1/ 2 ", d r a w n
5.5
50
—
8778
R a i s e d 1/ 2 ", d r a w n
5.5
50
• Helpful hint: Assemble the box
with the partition in place before
breaking off at the scored tab. This
will prevent you from breaking off
more tab than needed
769
R a i s e d 5 / 8", d r a w n
7.3
50
8769
R a i s e d 5 / 8", d r a w n
7.3
50
779
R a i s e d 3 / 4", d r a w n
8.8
50
8779
R a i s e d 3 / 4", d r a w n
8.8
50
780
Raised 1", drawn
12.0
25
Compliances
781
R a i s e d 1 -1/ 4 ", d r a w n
15.0
25
•
8781
R a i s e d 1 -1/ 4 ", d r a w n
15.0
25
795
R a i s e d 1 -1/ 2 ", w e l d e d
15.5
25
—
796
Raised 2", welded
20.5
25
—
• Partition is scored, so it can be
broken at the proper depth of box
and cover combination
•
®
– File E195978
– File LR-1082
—
S T D.
PKG.
50
—
—
—
4 " S Q U A R E B O X L O W V O LT A G E P A R T I T I O N S – F O R 1 - 1 / 2 " & 2 - 1 / 8 " D E E P
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
UPC
BAR CODE
F o r 1 - 1/ 2 " D e e p B o x a n d 2 - D e v i c e R a i s e d C o v e r * :
706
1 / 4 ", 1/ 2 ", 3 / 4 " o r 1 " ( 7 7 7 , 7 7 8 , 8 7 7 8 , 7 7 9 , 8 7 7 9 , 7 8 0 )
25
—
708
1 - 1 / 4 ", 1 - 1/ 2 ", o r 2 " ( 7 8 1 , 8 7 8 1 , 7 9 5 , 7 9 6 )
25
—
F o r 2 - 1/ 8 " D e e p B o x a n d 2 - D e v i c e R a i s e d C o v e r : *
707
1 / 4 ", 1/ 2 ", 3 / 4 " o r 1 " ( 7 7 7 , 7 7 8 , 8 7 7 8 , 7 7 9 , 8 7 7 9 , 7 8 0 )
25
—
709
1 -1/ 4 ", 1 - 1/ 2 ", o r 2 " ( 7 8 1 , 8 7 8 1 , 7 9 5 , 7 9 6 )
25
—
* B o x e s , c o v e r s , a n d p a r t i t i o n s m u s t b e o r d e r e d s e p a r at e l y
* F o r 1 - 1 / 2 " d e e p b o x w i t h 5 / 8 " c o v e r, p a r t i t i o n n o t av a i l a b l e
* F o r 2 - 1 / 8 " d e e p b o x w i t h 5 / 8 " c o v e r, u s e # 7 0 8 p a r t i t i o n
A31
4" SQUARE COVERS
Application
Product Features
800
803
902
907
801,
811, 812
906
810
813
808
814
915
809
• For easy mounting, RACO®
900 series covers include
additional hardware for mounting
the receptacle(s)
• RACO® 900 series covers meet
NEC Article 410-56(I) for mounting
the device with more than
one screw
• Hardware and cover are packed
in a poly-bag with printed catalog
number, compliances and installation instructions
• Helpful Hint: Remove a portion of
the GFCI receptacle ear to mount
device to 4" square cover
Compliances
•
•
®
4" SQUARE SURFACE COVERS – RAISED 1/2"
C ATA L O G
NUMBER
DESCRIPTION
CU.
IN.
S T D.
PKG.
800
1 To g g l e s w i t c h , c r u s h e d c o r n e r s
5.8
25
803
2 To g g l e s w i t c h e s
7.3
10
902
1 Duplex receptacle, crushed corners
5.8
25
– File E195978
907
2 Duplex receptacles
7.3
25
– File LR-1082
801
1 Receptacle 1.406" dia.
7.3
10
811
30A locking 1.719" dia.
7.3
10
812
20A Receptacle 1.594" dia.
7.3
10
906
1 Dup. & 1 toggle switch
7.3
10
810
30-50A Receptacle 2.141" dia.
7.3
10
813
7.3
10
808
1 GFCI
7.3
10
814
1 G F C I & 1 t o gg l e s w i t c h
7.3
10
915
1 GFCI & 1 duplex receptacle
7.3
10
809
2 GFCI
7.3
10
UPC
BAR CODE
RACO STEEL BOXES
& COVERS
• Exposed work covers are used to
support switches or receptacles
independent of the box (box must
still be used)
A32
4" SQUARE BOXES
1-1/2" DEEP
RACO STEEL BOXES
& COVERS
Application
Product Feature
Compliance
•
®
– File E195978
4" SQUARE EXTENSION RINGS
187
203, 8203
202
201, 8201
4" SQUARE EXTENSION RINGS – 1-1/2" DEEP – DRAWN
DESCRIPTION
KNOCKOUTS
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
S T D.
PKG.
UPC
BAR
CODE
—
201
—
1 2 - 1/ 2 "
—
50
8201
—
1 2 - 1/ 2 "
—
25
202
—
8 -3/ 4 "
—
50
—
203
—
8 -1/ 2", 4 -3/ 4 "
—
50
—
8203
—
8 -1/ 2", 4 -3/ 4 "
—
50
187
Attaches to switch boxes
8 - 1/ 2 ", 4 - 3/ 4 "
—
50
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
201, 8201
1-1/2"
—
—
202
1-1/2"
—
—
203, 8203
1-1/2"
—
—
187
1-1/2"
—
—
A33
4-11/16" SQUARE BOXES
1-1/2" AND 2-1/8" DEEP
Applications
246
245
work applications (surface
mounted wiring)
247
257, 8257
NEW
Product Features
258
and features
4-11/16" SQUARE BOXES – 1-1/2" DEEP – DRAWN
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
3/4" knockout
– File E195978
—
12-1/2"
3-1/2" , 2-3/4"
25
—
—
10-3/4"
3-1/2" , 2-3/4"
25
—
247
—
8-1/2", 4- 3/4"
3-1/2", 2-3/4"
25
—
S T D.
PKG.
UPC
BAR
CODE
—
250V
257
—
2 - 1 / 2 ", 1 0 - T K O ®
1 - 1 / 2 ", 2 - 3 / 4 " ,
2-TKO
25
250V
8257
—
2 - 1 / 2 ", 1 0 - T K O ®
1 - 1 / 2 ", 2 - 3 / 4 " ,
2-TKO®
25
258
—
8-1"
3 - 1 / 2 ", 2 - 3 / 4 "
25
259
—
6 - 1 1 / 4"
3 - 1 / 2 ", 2 - 3 / 4 "
25
—
265
—
4 - 3 / 4 ", 4 - 1 "
3 - 1 / 2 ", 2 - 3 / 4 "
25
—
8265
—
4 - 3 / 4 ", 4 - 1 "
3 - 1 / 2 ", 2 - 3 / 4 "
25
1 - 1 / 2 ", 2 - 3 / 4 " ,
2-TKO®
25
1 - 1 / 2 ", 2 - 3 / 4 " ,
2-TKO®
25
250V
250V
4-11/16" SQUARE BOXES
UPC
BAR
CODE
246
250V
Per U.L. 514-A, suitable for
use without a bonding jumper in
circuits above or below 250 volts
S T D.
PKG.
245
4-11/16" SQUARE BOXES – 2-1/8" DEEP – WELDED
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
Compliance
®
266 BOX-LOC ®
•
254
265, 8265
259
254
266
FM brkt.
2 - 1 / 2 ", 7 - T K O
BOX-LOC
MS flush
®
2 - 1 / 8 ",
10-TKO®
®
—
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
245
1-1/2"
—
—
246
1-1/2"
—
—
247
1-1/2"
—
—
257, 8257
2-1/8"
—
—
258
2-1/8"
—
—
259
2-1/8"
—
—
265, 8265
2-1/8"
—
—
254
2-1/8"
7-5/8"
5-1/16"
266
2-1/8"
—
—
RACO STEEL BOXES
& COVERS
• Boxes are used for a wide variety
of industrial applications where
larger- sized conductors or wiring
devices are needed and more
volume is required
A34
4-11/16" SQUARE COVERS & EXTENSIONS
1-1/2" AND 2-1/8" DEEP
RACO STEEL BOXES
& COVERS
Applications
• Extension rings provide
a means for adding additional
• Covers are used to close
an outlet box
250
262
833, 8833-5
832, 8832
Product Feature
up to 12˚ for box misalignment
Compliances
•
•
®
– File E195978
– File LR-1082
829, 835
837-839, 842-843
898-899
4-11/16" SQUARE EXTENSION – 1-1/2" DEEP – DRAWN
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
250
—
8-1/ 2", 4-3/ 4"
—
4-11/16" SQUARE EXTENSION – 2-1/8" DEEP – DRAWN
KNOCKOUTS
DESCRIPTION
C ATA L O G
BRACKET &
SIDES
B OT T O M
NUMBER
SETBACK
C O N D.
C O N D.
262
—
8-1/ 2", 4-3/ 4"
STD
P K G.
UPC
BAR
CODE
25
—
STD
P K G.
UPC
BAR
CODE
25
—
4-11/16" SQUARE COVERS
C ATA L O G
NUMBER
DESCRIPTION
CU.
IN.
S T D.
PKG.
UPC
BAR
CODE
—
MAX. RECOMMENDED
C E I L I N G FA N F I X T U R E
( DY N A M I C )
( S TAT I C )
LBS.
LBS.
832
Flat, blank
—
50
8832
Flat, blank
—
50
No
No
No
No
833
F l a t , 1 / 2 "K O c e n t e r e d
—
50
829
3.0
25
—
No
No
No
835
4.0
25
—
No
50
50
8833-5
F l a t , 1/ 2 " K O c e n t e r e d
—
50*
No
No
*5 Bundles of 10
4 - 1 1 / 1 6 " S Q U A R E C O M B I N AT I O N D E V I C E A N D T I L E C O V E R S – S I N G L E D E V I C E
C ATA L O G
NUMBER
DESCRIPTION
CU.
IN.
S T D.
PKG.
UPC
BAR CODE
837
R a i s e d 1/ 2 "
3.5
25
—
843
R a i s e d 5/ 8 "
4.5
25
—
838
R a i s e d 3/ 4 "
5.5
25
—
839
Raised 1"
7.5
25
—
842
R a i s e d 1 - 1/ 4"
9.5
25
—
898
R a i s e d 1 -1/ 2 "
11.0
20
—
899
Raised 2"
16.0
20
—
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
250
1-1/2"
—
—
262
2-1/8"
—
—
A35
4-11/16" SQUARE COVERS
Applications
• Exposed work covers are used to
support switches or receptacles
independent of the box
Product Features
818-820,
840, 841
885
972
870RAC
979
887
• RACO® 900 series covers
meet NEC Article 410-56(f) for
mounting the device by more
than one screw
• RACO® 900 Series covers include
additional hardware needed for
mounting the device(s)
• Hardware and cover are packed
in a poly-bag printed with catalog
number, compliances and
installation instructions
• Covers are available for mounting
one or two devices
888
857
856
878
858
959
4 - 1 1 / 1 6 " S Q U A R E C O M B I N AT I O N D E V I C E A N D T I L E C O V E R S – T W O D E V I C E
C ATA L O G
NUMBER
DESCRIPTION
CU.
IN.
S T D.
PKG.
UPC
BAR CODE
841
R a i s e d 1/ 2 "
5.5
Compliances
818
Raised 5 / 8"
7.3
25
—
•
840
R a i s e d 3/ 4 "
8.8
25
—
819
Raised 1"
12.0
25
—
820
Raised 1 -1/ 4"
15.0
25
—
885
Raised 1 -1/ 2"
15.5
20
—
•
®
– File E195978
– File LR-1082
25
4-11/16" SQUARE SURFACE COVERS – RAISED 1/2" – 10.3 CUBIC INCHES
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
870RAC
1 To g g l e s w i t c h
972
1 Duplex receptacle
10
979
10
887
10
888
10
878
10
856
1 D e c o r a t o r d e v. o r G F C I
10
857
2 D e c o r a t o r d e v. o r G F C I
10
858
1 To g g l e & 1 G F C I
10
959
1 Duplex & 1 GFCI
10
UPC
BAR CODE
10
4 - 1 1 / 1 6 " S Q U A R E B O X L O W V O LT A G E P A R T I T I O N S – F O R 1 - 1 / 2 " & 2 - 1 / 8 " D E E P
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
UPC
BAR CODE
F o r 1 - 1/ 2 " d e e p b o x a n d 2 - d e v i c e r a i s e d c o v e r :
706
1 / 2 ", 3 / 4 " o r 1 " ( 8 4 1 , 8 4 0 , 8 1 9 )
25
—
708
1 -1/ 4" or 1-1/2" (820, 885)
25
—
F o r 2 - 1/ 8 " d e e p b o x a n d 2 - d e v i c e r a i s e d c o v e r : *
707
1 / 2 ", 3 / 4 " o r 1 " ( 8 4 1 , 8 4 0 , 8 1 9 )
25
—
709
1 - 1/ 4 " o r 1 - 1/ 2 " ( 8 2 0 , 8 8 5 )
25
—
* B o x e s , c o v e r s a n d p a r t i t i o n s m u s t b e o r d e r e d s e p a r at e l y
* F o r 2 - 1 / 8 " d e e p b o x w i t h 5 / 8 " c o v e r, u s e # 7 0 8 p a r t i t i o n
* P a r t i t i o n s a r e u s e ab l e , b u t n o t U L l i s t e d i n 4 - 1 1 / 1 6 " s q . b o x
RACO STEEL BOXES
& COVERS
• Raised device covers are for
A36
HANDY BOXES
1-1/2" AND 1-7/8" DEEP
RACO STEEL BOXES
& COVERS
Applications
• Handy Boxes, also called utility
boxes, are used for convenience
outlets, switch boxes or small
junction boxes
• They are popular for exposed
mounted wiring)
655
650, 8650
660, 8660
• The NEC requires that surfacemounted wiring be enclosed
with a protective covering such
as EMT conduit
Product Features
and features
663, 8663
611
661
662
4" x 2" HANDY BOXES – 1-1/2" DEEP – WELDED
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
S T D.
PKG.
UPC
BAR
CODE
—
650
—
6-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
Compliances
8650
—
6-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
•
655
B brkt., 1/ 4"
3-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
—
S T D.
PKG.
UPC
BAR
CODE
—
•
®
– File E195978
– File LR-1082 (611 only)
STEEL HANDY BOXES
4" x 2" HANDY BOXES – 1-7/8" DEEP – DRAWN
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
660
—
6 - 1/ 2 "
2 - 1/ 2 "
3-1/ 2"
50
8660
—
6 - 1/ 2 "
2 - 1/ 2 "
3-1/ 2"
50
611
Ground screw incl.
6-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
—
663
—
4 - 3/ 4 "
2 - 3/ 4 "
2-3/ 4"
50
—
8663
—
4 - 3/ 4 "
2 - 3/ 4 "
2-3/ 4"
50
662
TS brkt., 1/ 2"
3-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
661
A brkt., 5/ 8"
3-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
DIMENSIONS
C ATA L O G
NUMBER
A
B
650, 8650
1-1/2"
—
—
655
1-1/2"
—
—
660, 8660
1-7/8"
—
—
611
1-7/8"
—
—
663, 8663
1-7/8"
—
662
1-7/8"
7"
2-3/8"
661
1-7/8"
6-7/16"
2-11/32"
C
—
A37
HANDY BOXES & EXTENSIONS
1-1/2", 1-7/8" AND 2-1/8" DEEP
Applications
• They are popular for exposed
work applications (surfacemounted wiring)
674
670RAC, 8670
678
671
• The NEC requires that surfacemounted wiring be enclosed
with a protective covering such
as EMT conduit
Product Features
and features
665
653
880
640
4" x 2" HANDY BOXES – 2-1/8" DEEP – WELDED
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
670RAC
—
8670
—
S T D.
PKG.
UPC
BAR
CODE
3-1/ 2"
50
—
3-1/ 2"
50
KNOCKOUTS
SIDES
ENDS
B OT T O M
6-1/ 2"
2 - 1/ 2"
6-1/ 2"
2 - 1/ 2"
674
—
4 -3/ 4 "
2 - 3/ 4 "
2 - 3/ 4 "
50
678
TS brkt., 1/ 2"
3-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
671
A brkt., 5/ 8"
3-1/ 2"
2 - 1/ 2"
3-1/ 2"
50
Compliances
•
®
– File E195978
4" x 2" HANDY BOX EXTENSION – 1-1/2" DEEP – WELDED
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
653
—
6-1/ 2"
2 - 1/ 2 "
—
4" x 2" HANDY BOX EXTENSION – 1-7/8" DEEP – DRAWN
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
665
—
6-1/ 2"
2 - 1/ 2"
—
S T D.
PKG.
UPC
BAR
CODE
25
S T D.
PKG.
UPC
BAR
CODE
50
STEEL HANDY BOXES
3-3/4" x 1-9/16" INDUSTRIAL HANDY BOX & COVER – 1-1/2" DEEP – DRAWN
DESCRIPTION
UPC
C ATA L O G
KNOCKOUTS
S T D.
BRACKET &
BAR
NUMBER
PKG.
SETBACK
SIDES
ENDS
B OT T O M
CODE
640
880
—
B l a n k c o v e r & c ap t i v e s c r e w s
6-1/ 2"
2 - 1/ 2 "
3 - 1/ 2 "
50
—
—
—
—
50
—
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
670, 8670
2-1/8"
—
—
674
2-1/8"
—
—
678
2-1/8"
7"
2-3/8"
671
2-1/8"
7"
2-3/8"
653
1-1/2"
—
—
665
1-7/8"
—
—
RACO STEEL BOXES
& COVERS
• Handy Boxes, also called utility
boxes, are used for convenience
outlets, switch boxes or small
junction boxes
A38
HANDY BOX COVERS
RACO STEEL BOXES
& COVERS
Applications
• Handy Box covers are used
to close a Handy Box
• Covers also may be used as
single-gang wall plates
Product Features
865
861
860
• RACO Handy Box covers are
designed to match the contours
of the box
®
• Cover corners are rounded
• All covers have captive screws
• Handy Box covers are
2-5/16" x 4-3/16"
Compliances
•
•
®
863, 867
864
– File E195978 (Cat. #861
not UL Listed)
– File LR-1082
4" x 2" HANDY BOX COVERS – 2-5/16" WIDE x 4-3/16" LENGTH
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
860
Blank
25
861
1/ 2" KO centered
25
865
To g g l e s w i t c h
25
864
Duplex receptacle
25
863
Single receptacle 1.406" dia.
25
867
25
UPC
BAR CODE
A39
SWITCH BOXES
SINGLE-GANG – 1" DEEP
Application
RACO STEEL BOXES
& COVERS
• Shallow switch boxes are made
for use with furring strips and
1/4" paneling
Product Features
• Shallow boxes have a “D”
bracket that is scored, so
it may be broken off if needed
features
Compliances
•
®
– File E195978 (Cat. #404
and #405 not UL Listed
404
418
405
3-3/4" x 2" SWITCH BOXES – 1" DEEP – NONGANGABLE – WELDED
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
404
Q clamp, 1/4"
—
405
Q clamp, 1/4"
—
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
2
1-1/ 2"
—
4
—
—
S T D.
PKG.
UPC
BAR
CODE
25
25
4" x 4" SWITCH BOX – 1" DEEP – NONGANGABLE – WELDED
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
418
(2) Q clamp, 1/4"
—
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
2 - 1/ 2"
—
S T D.
PKG.
25
UPC
BAR
CODE
A40
SWITCH BOXES
SINGLE-GANG – 1-1/2" AND 2" DEEP
RACO STEEL BOXES
& COVERS
Application
• Switch boxes are used to house
wiring devices such as switches
or outlets
Product Features
• Gangable switch boxes offer the
option of constructing a box to
hold two or more devices
410
400
• Plaster ears allow box to be used
in ”old work” applications
Compliances
•
®
– File E195978
420, 8420
445
3" x 2" SWITCH BOX – 1-1/2" DEEP – GANGABLE
C ATA L O G
NUMBER
400
DESCRIPTION
BRACKET &
SETBACK
KNOCKOUTS
Ears
SIDES
ENDS
B OT T O M
—
2 - 1/ 2 "
1-1/ 2"
S T D.
PKG.
UPC
BAR
CODE
20
3" x 2" SWITCH BOX – 1-1/2" DEEP – NONGANGABLE
C ATA L O G
NUMBER
410
DESCRIPTION
BRACKET &
SETBACK
Ears
SIDES
C O N D.
—
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
—
3" x 2" SWITCH BOX – 2" DEEP – GANGABLE
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
S T D.
PKG.
UPC
BAR
CODE
50
S T D.
PKG.
UPC
BAR
CODE
—
420
Ears
4-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
50
8420
Ears
4-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
50
C ATA L O G
NUMBER
445
STEEL SWITCH BOXES
DESCRIPTION
BRACKET &
SETBACK
Ears
SIDES
C O N D.
—
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
1-1/ 2"
DIMENSIONS
C ATA L O G
NUMBER
A
400
1-1/2"
410
1-1/2"
420, 8420
2"
445
2"
S T D.
PKG.
UPC
BAR
CODE
50
—
A41
SWITCH BOXES
S I N G L E - G A N G – 2 ", 2 - 1 / 8 " A N D 2 - 1 / 4 " D E E P
ING
COM ON
SO
Application
Product Features
• Gangable boxes offer the option
of constructing a box to hold
two or more devices
513
440
471, 8471
• Beveled corner boxes are
designed to prevent the clamp
screws from protruding into
back wall
in ”old work” applications
473
Compliances
•
®
– File E195978 (Cat. #513
not UL Listed)
487
®
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
440
Ears
—
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
1-1/ 2"
S T D.
PKG.
UPC
BAR
CODE
50
—
3" X 2" SWITCH BOX – 2-1/8" DEEP – NONGANGABLE – “SNAP IN CLIP”
“OLD WORK” WITH CONDUIT KO’S – 11.0 CUBIC INCHES
“
DESCRIPTION
BRACKET &
SETBACK
C ATA L O G
NUMBER
STEEL SWITCH BOXES
513
O l d Wo r k W i t h S n a p I n
Clips And Ears
KNOCKOUTS
SIDES
2-1/2"
ENDS
B OT T O M
1-1/2"
2-1/ 2"
S T D.
PKG.
UPC
BAR
CODE
24
3" X 2" SWITCH BOXES – 2-1/4" DEEP – GANGABLE – BEVELED CORNERS
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
471
Ears
—
8471
Ears
—
473
Level bumps
487
Old work, Griptite
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
1-1/ 2"
C ATA L O G
NUMBER
UPC
BAR
CODE
50
—
4
—
—
4
2-1/ 2"
1-1/ 2"
20
—
4
—
1-1/ 2"
20
DIMENSIONS
A
440
2"
471, 8471
2-1/4"
473
2-1/4"
487
2-1/4"
1-1/ 2"
S T D.
PKG.
50
RACO STEEL BOXES
& COVERS
or outlets
A42
SWITCH BOXES
SINGLE-GANG – 2-1/2" DEEP
RACO STEEL BOXES
& COVERS
Application
or outlets
Product Features
500, 503, 8500
features
• Gangable switch boxes offer
the option of constructing a box
to hold two or more devices
• Plaster ears allow the box to be
used in “old work” applications
Compliances
•
®
– File E195978
502
501
504, 505, 8504
ING
COM ON
SO
506
3" x 2" SWITCH BOXES – 2-1/2" DEEP – GANGABLE
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
S T D.
PKG.
UPC
BAR
CODE
—
500
Ears
4-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
50
8500
Ears
4-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
50
503
Ears
4-1/2"
2 - 3/ 4"
2 - 1/ 2"
50
501
Without ears
4-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
50
504
TS brkt., 1/ 2"
2-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
50
8504
TS brkt., 1/ 2"
2-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
10
505
TS brkt., 1/ 2"
2-1/ 2"
2 - 3/ 4"
2 - 1/ 2"
50
—
502
B brkt., 5/ 8"
4-1/ 2"
2 - 1/ 2"
2 - 1/ 2"
10
—
506
Old work, Tigergrip
—
2 - 1/ 2"
2 - 1/ 2"
20
509
Old work
—
2 - 1/ 2"
2 - 1/ 2"
20
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
508
STEEL SWITCH BOXES
508
509
Old work
—
2 - 1/ 2"
B OT T O M
—
S T D.
PKG.
20
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
500, 8500
2-1/2"
—
—
503
2-1/2"
—
—
501
2-1/2"
—
—
504, 8504
2-1/2"
7-5/32"
2-5/16"
502
2-1/2"
2"
4"
506
2-1/2"
—
—
508
2-1/2"
—
—
509
2-1/2"
—
—
—
—
UPC
BAR
CODE
A43
SWITCH BOXES
Application
Product Features
528, 8528
519, 8519
features
ING
COM ON
SO
517
531, 8531
540
596
512
545
in “old work” applications
Compliances
•
®
– File E195978
DESCRIPTION
BRACKET &
SETBACK
C ATA L O G
NUMBER
529
SIDE
C O N D.
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
1 - 1/ 2 "
S T D.
PKG.
UPC
BAR
CODE
50
—
519
Ears
—
8519
Ears
—
4
—
1 - 1/ 2 "
50
528
Level bumps
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
8528
Level bumps
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
531
T S b r k t . , 1/ 2 "
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
8531
T S b r k t . , 1/ 2 "
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
540
B b r k t . , 1/ 4 "
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
529
Long brkt., 5/ 8"
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
517
O l d w o r k , Ti g e r g r i p
4
—
—
1 - 1/ 2 "
20
512
Old work
4
—
—
1 - 1/ 2 "
20
—
—
—
3" x 2" SWITCH BOXES – 2-1/2" DEEP – NONGANGABLE
C ATA L O G
NUMBER
STEEL SWITCH BOXES
DESCRIPTION
BRACKET &
SETBACK
596
Without ears
545
Old work
SIDE
C O N D.
—
—
KNOCKOUTS
ENDS
B OT T O M
C A B L E C O N D.
COND
4
2 - 1/ 2 "
1 - 1/ 2 "
4
2 - 1/ 2 "
—
S T D.
PKG.
UPC
BAR
CODE
50
—
20
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
—
519, 8519
2-1/2"
—
528, 8528
2-1/2"
—
—
531, 8531
2-1/2"
7-5/32"
2-5/16"
540
2-1/2"
13-1/32"
5-3/64"
529
2-1/2"
13-1/32"
5-3/64"
517
2-1/2"
—
—
596
2-1/2"
—
—
545
2-1/2"
—
—
RACO STEEL BOXES
& COVERS
or outlets
A44
SWITCH BOXES
RACO STEEL BOXES
& COVERS
Application
or outlets
Product Features
524, 8524
518, 8518
features
522, 8522
526
523, 8523
in “old work” applications
Compliances
•
®
– File E195978
gang 4" square, and single gang
gangable boxes U.L. listed steel
boxes are acceptable for use in
2-hour fire rated walls. For additional
information, consult U.L. “Fire
Resistance Directory” or the
U.L. website at www.ul.com
STEEL SWITCH BOXES
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
1 - 1/ 2 "
S T D.
PKG.
UPC
BAR
CODE
50
—
518
Ears
—
8518
Ears
—
4
—
1 - 1/ 2 "
50
524
T S b r k t . , 1/ 2 "
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
8524
T S b r k t . , 1/ 2 "
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
522
Long B, 5/ 8"
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
8522
Long B, 5/ 8"
—
4
2 - 1/ 2 "
1 - 1/ 2 "
50
523
Old work, Griptite
—
4
—
1 - 1/ 2 "
50
8523
Old work, Griptite
—
4
—
1 - 1/ 2 "
50
—
—
—
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
526
Old work
SIDE
C O N D.
—
KNOCKOUTS
ENDS
C A B L E C O N D.
4
—
B OT T O M
COND
—
S T D.
PKG.
20
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
518, 8518
2-1/2"
—
—
524, 8524
2-1/2"
7-5/32"
2-5/16"
522, 8522
2-1/2"
13-1/32"
5-3/64"
526
2-1/2"
1-3/8"
3-13/32"
UPC
BAR
CODE
A45
SWITCH BOXES
SINGLE-GANG – 2-3/4" AND 2-27/32" DEEP
Application
RACO STEEL BOXES
& COVERS
or outlets
Product Features
• RACO® 353, 355 and 8355 are
extra-wide for ease of GFCI
device installation
and features
Compliances
•
®
– File E195978
CAT. NO. 353, 355, 8355
355, 8355
353
561
560, 565, 8560
562
3" x 2-1/8" SWITCH BOX – 2-27/32" DEEP – NONGANGABLE
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
353
S brkt., nails
—
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
1 - 1/ 2 "
S T D.
PKG.
UPC
BAR
CODE
50
3" x 2-1/8" SWITCH BOX – 2-27/32" DEEP – NONGANGABLE
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
355
S brkt., nails
—
8355
S brkt., nails
—
C ATA L O G
NUMBER
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
—
1 - 1/ 2 "
4
—
1 - 1/ 2 "
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
S T D.
PKG.
50
UPC
BAR
CODE
—
20
S T D.
PKG.
UPC
BAR
CODE
—
560
Ears
4 - 1/ 2 "
2 - 1/ 2 "
2 - 1/ 2 "
50
8560
Ears
4 - 1/ 2 "
2 - 1/ 2 "
2 - 1/ 2 "
50
565
Ears
4 - 1/ 2 "
2 - 3/ 4"
2 - 1/ 2 "
50
—
561
Without ears
4 - 1/ 2 "
2 - 1/ 2 "
2 - 1/ 2 "
50
—
562
T S b r k t . , 1/ 2 "
2 - 1/ 2 "
2 - 1/ 2 "
2 - 1/ 2 "
50
—
STEEL SWITCH BOXES
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
560, 8560
2-3/4"
—
—
565
2-3/4"
—
—
562
2-3/4"
7-5/32"
2-5/16"
561
2-3/4"
7-5/32"
2-5/16"
A46
SWITCH BOXES
SINGLE-GANG – 2-3/4" AND 3-1/2" DEEP
RACO STEEL BOXES
& COVERS
Application
or outlets
Product Features
567
and features
574
564
570RAC
590, 591, 8590
592
Compliances
•
®
– File E195978
®
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
567
Ears
4 - 1/ 2 "
564
T S b r k t . , 1/ 2 "
2 - 1/ 2 "
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
2 - 1/ 2 "
1 - 1/ 2 "
4
2 - 1/ 2 "
UPC
BAR
CODE
50
50
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
570RAC
Ears
4 - 1/ 2 "
574
T S b r k t . , 1/ 2 "
2 - 1/ 2 "
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
2 - 1/ 2 "
1 - 1/ 2 "
4
2 - 1/ 2 "
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
STEEL SWITCH BOXES
1 - 1/ 2 "
S T D.
PKG.
1 - 1/ 2 "
B OT T O M
S T D.
PKG.
UPC
BAR
CODE
50
—
50
S T D.
PKG.
UPC
BAR
CODE
—
590
Ears
4 - 1/ 2 "
4 - 1/ 2 "
1 - 1/ 2 "
50
8590
Ears
4 - 1/ 2 "
4 - 1/ 2 "
1 - 1/ 2 "
50
591
Ears
4-3/ 4"
4-3/ 4"
1 - 1/ 2 "
50
592
Without ears
4 - 1/ 2 "
4 - 1/ 2 "
1 - 1/ 2 "
50
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
567
2-3/4"
—
—
564
2-3/4"
7-5/32"
2-5/16"
570RAC
2-3/4"
—
—
574
2-3/4"
7-5/32"
2-5/16"
590, 8590
3-1/2"
—
—
591
3-1/2"
—
—
592
3-1/2"
—
—
—
A47
SWITCH BOXES
Application
RACO STEEL BOXES
& COVERS
or outlets
Product Features
allow for easy positioning of
box along studs or joists
601, 8601
605
and features
used in ”old work” applications
Compliances
•
®
– File E195978
STEEL SWITCH BOXES
603
604, 8604
600
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
2 - 1/ 2 "
1 - 1/ 2 "
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
601
Ears
4 - 1/ 2 "
8601
Ears
4 - 1/ 2 "
605
T S b r k t . , 1/ 2 "
4 - 1/ 2 "
4
2 - 1/ 2 "
1 - 1/ 2 "
25
603
B brkt., 5/ 8"
4 - 1/ 2 "
4
2 - 1/ 2 "
1 - 1/ 2 "
25
C ATA L O G
NUMBER
4
2 - 1/ 2 "
1 - 1/ 2 "
S T D.
PKG.
UPC
BAR
CODE
25
—
25
—
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
SIDE
C O N D.
KNOCKOUTS
ENDS
B OT T O M
COND
C A B L E C O N D.
4
2 - 1/ 2 "
1 - 1/ 2 "
S T D.
PKG.
UPC
BAR
CODE
600
Ears
4 - 1/ 2 "
25
—
604
T S b r k t . , 1/ 2 "
4 - 1/ 2 "
4
2 - 1/ 2 "
1 - 1/ 2 "
25
—
8604
T S b r k t . , 1/ 2 "
4 - 1/ 2 "
4
2 - 1/ 2 "
1 - 1/ 2 "
25
DIMENSIONS
C ATA L O G
NUMBER
A
601, 8601
3-1/2"
—
—
605
3-1/2"
7-5/32"
2-5/16"
603
3-1/2"
1-31/32"
4"
600
3-1/2"
—
—
604, 8604
3-1/2"
7-5/32"
2-5/16"
B
C
A48
SWITCH BOXES
TWO-GANG – 2-1/8" DEEP
RACO STEEL BOXES
& COVERS
Applications
• Installers can save time and cut
installation costs with two-gang
switch boxes
• These larger capacity boxes are
ideal for today’s designs where
there is a need to install two
devices at one location
680
685
681
683
mounted wiring)
Product Features
• 681, 685 bracketed boxes are set
back 1/2" eliminating the need for
a plaster ring
and features
• Covers are unpainted and manufactured from pre-galvanized steel
Compliances
•
®
– File E195978
®
TWO-GANG SWITCH BOXES
871
873
872
4" SQUARE TWO DEVICE SWITCH BOX – 2-1/8" DEEP – DRAWN
KNOCKOUTS
C ATA L O G
NUMBER
DESCRIPTION
BRACKET &
SETBACK
680
—
12-1/ 2"
5-1/ 2"
683
—
8 - 1 / 2 " , 4 - 3/ 4 "
3 - 1 / 2 " , 2 - 3/ 4 "
25
681
TS brkt., 1/ 2"
9-1/ 2"
5-1/ 2"
25
685
TS brkt., 1/ 2"
6 - 3/ 4 "
3 - 1 / 2 " , 2 - 3/ 4 "
25
SIDES
C O N D.
UPC
BAR
CODE
S T D.
PKG.
B OT T O M
C O N D.
25
4 " S Q U A R E – T W O - D E V I C E W A L L P L AT E S *
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
871
872
2 To g g l e s w i t c h e s
1 D u p . & 1 To g g l e s w i t c h
25
25
873
25
UPC
BAR CODE
*Cover face surface is 1/4" from wall when installed
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
D
E
680
4"
4"
2-1/8"
—
—
683
4"
4"
2-1/8"
—
—
681
4"
4"
2-1/8"
7"
4-9/32"
685
4"
4"
2-1/8"
7"
4-9/32"
A49
SWITCH BOXES
M U LT I - G A N G – 2 - 1 / 2 " D E E P
Applications
RACO STEEL BOXES
& COVERS
• Installers can save time
and cut installation costs with
multi-gang switch boxes
• These larger capacity boxes are
ideal for today’s designs where
there is a need to install more than
two devices at one location
Product Features
features
Compliance
•
®
– File E195978 (Cat. #971
not UL Listed)
686
687
971
M U LT I - D E V I C E S W I T C H B O X E S – 2 - 1 / 2 " D E E P – W E L D E D
WITH CONDUIT KO’S
DESCRIPTION
C ATA L O G
KNOCKOUTS
BRACKET &
NUMBER
SETBACK
SIDES
ENDS
B OT T O M
C U . I N . S T D.
C A P.
PKG.
686
3-Gang
1/2" setback
2-1/ 2", 2-3/4" 6- 1/ 2", 6-3/4" 3- 1/ 2", 3- 3/4" 47.8
10
687
4-Gang
1/2" setback
2-1/ 2", 2-3/4" 8- 1/ 2", 8-3/4" 4- 1/ 2", 4- 3/4" 63.5
10
971
Low voltage
partition
—
—
—
—
25
UPC
BAR
CODE
—
MULTI-GANG SWITCH BOXES
DIMENSIONS
C ATA L O G
NUMBER
A
B
C
686
5-9/16"
3-3/4"
2-1/2"
7-5/8"
5-31/32"
687
7-3/8"
3-3/4"
2-1/2"
7-5/8"
7-25/32"
D
E
A50
G A N G B O X E S , PA R T I T I O N S A N D C O V E R S
1-5/8" AND 2-1/2" DEEP
RACO STEEL BOXES
& COVERS
Application
• Gang boxes are used where
a number of wiring devices are
to be centrally located
958
952
951
Product Features
NEW
• Gang boxes save time in
installation — no need to
gang boxes together
• Have 1/2" and 3/4" concentric
KO’s for use with a wide variety
of wiring methods
NEW
941
NEW
942
NEW
NEW
• Bottom KO pattern — 3-1/2"
and 2-3/4"
944
943
945
• Accept two styles of covers —
flat and 3/4" raised device cover
• Device covers also fit next smaller
box, i.e. three-gang cover fits
two- or three-gang box
GANG BOXES – 1-5/8" & 2-1/2” DEEP – WELDED
WITH CONDUIT KO’S
• Use low voltage partitions
#974 or #949
Compliance
•
®
– File E195978
C ATA L O G N O. O F
NUMBER GANGS DEPTH
KNOCKOUTS
WIDTH
T O P & B OT T O M * S I D E S *
BACK
CU.
IN.
UPC
S T D. B A R
PKG. CODE
951
2
1-5/8" 6-13/16”
8-conc.
4-conc. 3-1/2", 2-3/4"
47.0
5
952
3
1-5/8" 8-5/8”
10-conc.
4-conc. 6-1/2", 4-3/4"
60.0
5
953
4
1-5/8" 10-7/16”
12-conc.
4-conc. 6-1/2", 4-3/4"
72.8
5
954
5
1-5/8" 12-1/4”
14-conc.
4-conc. 6-1/2", 4-3/4"
85.8
5
—
955
6
1-5/8" 14-1/16”
16-conc.
4-conc. 6-1/2", 4-3/4"
98.5
1
—
956
7
1-5/8" 15-7/8”
18-conc.
4-conc. 6-1/2", 4-3/4" 111.5
1
—
957
8
1-5/8" 17-11/16” 20-conc.
4-conc. 6-1/2", 4-3/4" 124.5
1
—
958
9
1-5/8" 19-1/2”
22-conc.
4-conc. 6-1/2", 4-3/4" 137.3
1
—
941
2
2-1/2" 6-13/16”
4-3/4", 4-conc. 4-conc. 3-1/2", 2-3/4"
70.0
942
3
2-1/2" 8-5/8”
8-3/4", 2-conc. 4-conc. 6-1/2", 4-3/4"
90.0
5
943
4
2-1/2" 10-7/16”
4-3/4", 4-conc. 4-conc. 6-1/2", 4-3/4" 110.0
5
944
5
2-1/2" 12-1/4”
6-3/4", 4-conc. 4-conc. 6-1/2", 4-3/4" 130.0
5
945
6
2-1/2" 14-1/16”
6-3/4", 6-conc. 4-conc. 6-1/2", 4-3/4" 150.0
25
5
* 1 - 5 / 8 " d e e p b o x e s , c o n c e n t r i c K O ’s a r e 1 / 2 " & 3 / 4 "
* 2 - 1 / 2 " d e e p b o x e s , c o n c e n t r i c K O ’s a r e 3 / 4 " & 1 "
STEEL GANG BOXES
DIMENSIONS
C ATA L O G
NUMBER
N O. O F
GANGS
A
951
2
1-5/8"
6-3/8"
6-13/16"
952
3
1-5/8"
8-3/16"
8-5/8"
953
4
1-5/8"
10"
10-7/16"
954
5
1-5/8"
11-13/16"
12-1/4"
955
6
1-5/8"
13-5/8"
14-1/16"
956
7
1-5/8"
15-7/16"
15-7/8"
957
8
1-5/8"
17-1/4"
17-11/16"
958
9
1-5/8"
19-1/16"
19-1/2"
941
2
2-1/2"
6-3/8"
6-13/16"
942
3
2-1/2"
8-3/16"
8-5/8"
943
4
2-1/2"
10"
10-7/16"
944
5
2-1/2"
11-13/16"
12-1/4"
945
6
2-1/2"
13-5/8"
14-1/16"
B
C
—
A51
G A N G B O X E S , PA R T I T I O N S A N D C O V E R S
Application
RACO STEEL BOXES
& COVERS
• Gang box covers permit the
mounting of devices
Product Feature
• Device covers also fit next smaller
box, i.e. three-gang cover fits
two- or three-gang box
Compliance
•
®
– File E195978 (Cat. #974
and 949 not UL Listed)
846
974
823
F L A T, B L A N K C O V E R S F O R G A N G B O X E S
C ATA L O G
NUMBER
N O. O F
GANGS
844
2
7 - 1/ 1 6 "
—
5
—
845
3
8 - 7/ 8 "
—
5
—
846
4
10 -11/ 16"
—
5
—
847
5
1 2 - 1/ 2 "
—
1
—
848
6
1 4 - 5/ 1 6 "
—
1
—
849
7
1 6 - 1/ 8 "
—
1
—
850
8
1 7 - 15/ 1 6 "
—
1
—
851
9
1 9 - 3/ 4 "
—
1
—
WIDTH
CU.
IN.
S T D.
PKG.
UPC
BAR CODE
DEVICE COVERS FOR GANG BOXES RAISED 3/4"
C ATA L O G
NUMBER
N O. O F
GANGS
CU.
IN.
S T D.
PKG.
821
2
822
3
7 -1/ 16"
10.0
5
8 -7/ 8"
15.3
5
823
4
10 -11/ 16"
20.3
5
824
5
1 2 -1/ 2 "
25.5
5
—
825
6
14 -5/ 16"
30.5
1
—
826
7
1 6 -1/ 8 "
35.5
1
—
827
8
1 7 -15/ 1 6 "
40.8
1
—
828
9
19 -3/4"
45.8
1
—
WIDTH
UPC
BAR CODE
—
L O W V O LT A G E P A R T I T I O N F O R G A N G B O X E S
NEW
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
UPC
BAR CODE
974
For 1-5/8” Deep
25
—
949
For 2-1/2” Deep
25
—
A52
STEEL CONCRETE RINGS
RACO STEEL BOXES
& COVERS
Applications
• Concrete rings are used with
poured deck (floor) in high-rise
construction
• These boxes are installed on
wooden or steel concrete forms.
After the forms are removed, the
box is flush with the concrete
284
GORILLA-RING ™
273, 274, 275,
276, 279
*280 SHOWN
WITH 918 BARS
• RACO® Ceiling Fan Concrete
Ring 284 is listed for support
of ceiling fans
Product Features
890
• Flat sides provide excellent
contact for locknuts
• External ears are used to nail
the ring to the wood form
891
• The top cover is removable
for before-pour work
CONCRETE RINGS
• Ears on inside of box are
for fixtures
C ATA L O G
DEPTH
NUMBER
• Waxed fixture ears prevent
concrete from interfering with
the threads
893
892
KO SIZES
N O.
ROWS KO’s
CU.
IN.
S T D.
PKG.
MAX. RECOMMENDED
UPC
C E I L I N G FA N F I X T U R E
BAR CODE
( DY N A M I C )
( S TAT I C )
LBS.
LBS.
270RAC
2"
1/ 2 " & 3 / 4 "
Single
24.5
25
—
No
50
271
2 -1/ 2 " 1/ 2 " & 3 / 4 "
Single
30.8
25
—
No
50
272
3"
1/ 2 " & 3 / 4 "
Single
37.0
25
—
No
50
277
3"
3/ 4" & 1"
Single
37.0
25
—
No
50
273
3 -1/ 2 " 1/ 2 " & 3 / 4 "
Double
43.0
20
—
No
50
278
3 -1/ 2 " 3 / 4 " & 1 "
Single
43.0
20
—
No
50
274
4"
1/ 2 " & 3 / 4 "
Double
49.3
20
—
No
50
279
4"
3/ 4" & 1"
Double
49.3
20
—
No
50
275
5"
1/ 2 " & 3 / 4 "
Double
61.5
10
—
No
50
Compliance
276
6"
1/ 2 " & 3 / 4 "
Double
74.0
10
—
No
50
•
284
4"
1/ 2 " & 3 / 4 "
Double
49.3
6
—
35
75
• Variety of cover plates
are available
• Cover plate must be ordered
separately with all (except 280
which includes a 891 cover)
RACO® concrete rings
®
– File E195978
HUNG CEILING BOX – 3-1/2" DEEP
C ATA L O G
NUMBER
CU.
IN.
DESCRIPTION
280
3 / 8 " S t u d , 8 - 1/ 2 ", 8 - 3 / 4 " K O ’s *
918
3 0 " L o n g b a r s fo r h u n g c e i l i n g b o x
S T D.
PKG.
UPC
BAR CODE
43.0
20
—
—
40
—
* O r d e r b a r s s e p a r at e l y
STEEL CONCRETE RINGS
C O N C R E T E R I N G – B A C K P L AT E S / C O V E R S A N D A DA P T E R R I N G
C ATA L O G
NUMBER
DESCRIPTION
890
KNOCKOUTS
—
O. D.
DIAM.
S T D.
PKG.
UPC
BAR CODE
3 - 1 / 2 ", 2 - 3 / 4 "
4-1/2"
25
—
891
3/ 8" Stud
2 - 1 / 2 ", 2 - 3 / 4 "
4-1/2"
25
—
892
Flat, blank
—
4-1/2"
25
—
893
Joins Oct. Ext. ring to concrete ring
Includes two retained screws
—
4-1/2"
50
—
K N O C K O U T L O C AT I O N S
KNOCKOUT
SIZE
A
B
1/2" and 3/4" KOs
1/2"
3/4"
3/4" and 1" KOs
3/4"
1"
A53
M A S O N RY B O X E S
2-1/2" AND 3-1/2" DEEP
Applications
RACO STEEL BOXES
& COVERS
• Masonry boxes are designed to
accommodate the mounting of
switches or other devices in
masonry walls
• 2-1/2" deep box is used
on 4" block
692
691
690
• 3-1/2" deep box is used
on 6" and 8" block
Product Features
• Rugged welded construction does
not fall apart during construction
• Available from one- to six-gang
in 2-1/2" or 3-1/2" depths
• Rectangular shape fits square
cuts in block
• Have 1/2" and 3/4" concentric
KO’s for use with a wide variety
of wiring methods
• Large volume design allows
for additional work room inside
the box
• Device ears are formed inside
the box, preventing mortar from
getting in the device holes
• Low voltage partition 971 will
fit all 2-1/2" or 3-1/2" depths
• Standard wall plates cover
the box
Compliance
•
®
– File E195978 (Cat. #971
not UL Listed)
696
695, 8695
697
971
MASONRY BOXES – 2-1/2" DEEP – NONGANGABLE
WITH CONDUIT KO’S
CU.
IN.
S T D.
PKG.
UPC
BAR
CODE
2
16.0
25
—
4
31.8
25
—
3
47.8
10
—
8
4
63.5
10
—
9 - 7/ 3 2 "
10
5
79.5
10
—
11 1 / 3 2 "
12
6
95.3
1
—
KNOCKOUTS
C ATA L O G
NUMBER
N O. O F
GANGS
WIDTH
690
1
1-3 1/ 3 2"
2
691
2
3 -2 5/ 3 2"
4
692
3
5 -19/ 3 2"
6
693
4
7 -13/ 3 2"
694
5
960
6
ENDS
B OT T O M
WITH CONDUIT KO’S
B OT T O M
CU.
IN.
S T D.
PKG.
UPC
BAR
CODE
2
22.5
25
—
2
22.5
25
KNOCKOUTS
C ATA L O G
NUMBER
N O. O F
GANGS
ENDS
695
1
1-3 1/ 3 2"
4
8695
1
1-3 1/ 3 2"
4
696
2
3 -2 5/ 3 2"
8
4
45.0
10
697
3
5 -1 9/ 3 2"
12
3
67.3
10
698
4
7 -13/ 3 2"
16
4
89.8
10
—
699
5
9 - 7/ 3 2 "
20
5
112.3
10
—
965
6
1- 1 1 / 3 2 "
24
6
134.8
1
—
WIDTH
L O W V O LT A G E P A R T I T I O N F O R M A S O N R Y B O X E S
STEEL MASONRY BOXES
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
UPC
BAR CODE
971
F o r 2 -1/ 2 " o r 3 -1/ 2 " d e e p b o x e s
—
25
DIMENSIONS
C ATA L O G
NUMBER
N O. O F
GANGS
A
B
690
1
1-31/32"
2-1/2"
691
2
3-25/32"
2-1/2"
692
3
5-9/16"
2-1/2"
693
4
7-13/32"
2-1/2"
694
5
9-7/32"
2-1/2"
960
6
1-11/32"
2-1/2"
695,8695
1
1-31/32"
3-1/2"
696
2
3-25/32"
3-1/2"
697
3
5-9/16"
3-1/2"
698
4
7-13/32"
3-1/2"
699
5
9-7/32"
3-1/2"
965
6
1-11/32"
3-1/2"
A54
ACCESSORIES FOR STEEL BOXES
RACO STEEL BOXES
& COVERS
Application
• Adjustable bar hanger allows box
to be placed between ceiling joists
or wall studs quickly and easily
Product Features
• Both RACO® 920 and 922 bar
fixture hangers allow box to be
located anywhere along length
of bar
• RACO® 920 includes 3/8" trade
size stud to accommodate
fixture stem
• 922 Clip installs in 1/2" knockout
located in bottom (back) of box
• RACO® box must be ordered
separately
920, 8920
922
Box Installation
A D J U S TA B L E B A R H A N G E R S
• Bar hangers attach to octagon
or square boxes through center
1/2" knockouts
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
UPC
BAR
CODE
920
3/ 8" Stud, adj. 14-1/4" to 22-1/2"
50
—
8920
3/ 8" Stud, adj. 14-1/4" to 22-1/2"
50
922
Clip, adj. 14-1/4" to 22-1/2"
50
• Remove the knockout
• Remove the screw and fixture
stud (or clip) from bar hanger
• Place the stud inside the box
and replace the screw
• When box is located accurately
between the joists, tighten the
screw securely
Compliance
•
®
– File E195978
—
MAX. RECOMMENDED
C E I L I N G FA N
FIXTURE
( DY N A M I C )
( S TAT I C )
LBS.
LBS.
No
10*
No
10*
No
10*
A55
Far Side Box Support Application
RACO STEEL BOXES
& COVERS
• Prevents installed box from
“floating” in wall cavity
Far Side Box Support Features
• Snaps into hole in back of box
• Easy to cut to fit depth of cavity
BOX-LOC® Application
• Allows any box to be attached to
either side of a metal stud quickly
and easily
BOX-LOC® Product Features
978
INSTALLED
• Patented spring steel design
BOX-LOC®
980
978
• Installs in seconds without tools
• Mounts on either side of stud
• Repositions easily
• Bracket may be added to any
RACO® 4" or 4-11/16" square steel
box — simply tap the bracket
with a hammer and the barbed
hooks hold it in place
• BOX-LOC® also fits RACO® 7220
and 7232, 4" square PVC boxes
• BOX-LOC is a snap to install.
Place the bracket on the open side
of the stud first. Slots in the bracket engage the lip of the stud and
locking it in place
®
B O X - L O C ® M E TA L S T U D C L I P
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
UPC
BAR CODE
980
Spring-steel bracket
50
DESCRIPTION
S T D.
PKG.
UPC
BAR CODE
1 -7/ 8" Rigid, plastic support
50
—
FA R S I D E B O X S U P P O RT
C ATA L O G
NUMBER
978
A56
RACO STEEL BOXES
& COVERS
Adjust-A-BraceTM Application
• Adjust-A-BraceTM is used to
mount electrical outlet boxes
between studs
ADJUST-A-BRACETM
985
Adjust-A-BraceTM
Product Features
• Time saver for the installer
• One brace will handle different
types and depths of boxes —
4" or 4-11/16"
• Gives the freedom to choose
the location
• No preset locations
• Ruler marks are stamped on
the brace for consistent outlet
box placement every time
“Old Work Saddle” Application
• The “Old Work Saddle” #970 is
designed to be used with 2-1/2"
deep switch boxes that have
plaster ears
TM
Application:
GRIP-LOK
“Old
Work Saddle”
Product
Feature
• #970 installs into the 1/2" bottom
conduit knockout. When the box
is slipped into the hollow wall,
the bracket springs out behind
the wall. Tighten the screw
and the box is rigidly in place
GRIP-LOKTM Application
• The GRIP-LOK support is
designed to be used with any deep
switch box that has plaster ears
TM
A D J U S T - A - B R A C E TM O U T L E T B O X S U P P O R T
C ATA L O G
NUMBER
Compliances
•
•
®
– File E195978 (not 970RAC)
– C 22.2 #18
Certified for Canada
(not 970RAC, 977)
DESCRIPTION
S T D.
PKG.
985
For 16" on center studs
25
986
For 24" on center studs
25
UPC
BAR CODE
SWITCH BOX SUPPORT “OLD WORK SADDLE”
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
970RAC
Mounts switch boxes with plaster
ears in hollow walls or ceilings
10
UPC
BAR CODE
G R I P - L O K TM “ O L D W O R K ” S W I T C H B O X S U P P O R T
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
UPC
BAR CODE
—
977
S u p p l i e d a s a p a i r. U s e p a i r t o m o u n t s w i t c h b o x
with plaster ears in hollow wall, 1-7/8” long legs
100 pairs
8977
100 pairs
8977-5
100 pairs*
GRIP-LOKTM Product Feature
• Simply slip GRIP-LOKTM between
box and wall, then bend tabs into
the box
GRIP-LOK TM
977, 8977, 8977-5
970RAC
*4 Bundles of 25
SWITCH BOX ACCESSORIES
C ATA L O G
NUMBER
DESCRIPTION
FOR RACO
SWITCH BOXES
S T D.
PKG.
961
Plaster Ears Open Style w/screws
410, 420, 440, 445, 500, 503,
506, 508, 526, 545, 560, 565,
567, 570RAC, 590, 600, 601
100
962
Plaster Ears Clipped Style w/screws
150, 400, 591
100
963
Plaster Ears 1 Screw Style w/screws
471, 487, 517, 518, 519, 523
100
964
O l d Wo r k G r i p t i t e C l i p
w/screws
523
100
966
O l d Wo r k Ti g e r g r i p C l i p
w/screws
487, 506, 517
100
UPC
BAR CODE
A57
Grounding Applications
• Grounding screws thread into
the box and provide a means of
fastening the ground conductor
982, 994
#14 WIRE
NEW
996, 8996-1
8983-1, 983
#12 WIRE
NEW
984, 997
#14 WIRE
RACO STEEL BOXES
& COVERS
• Grounding accessories provide
a safe electrical path to ground
to help prevent shock
NEW
• Ground wires fasten to the box
and are then connected to wiring
system or wiring device
• RACO® 6" and 8" ground
pigtails feature 4-way (slotted,
phillips, hex-head) combo 10-32
captive screw
• Ground clips provide a quick
method of fastening a ground
conductor to the edge of a steel
outlet box
• Ground clips are designed for
use with solid No. 14, 12, and
10 gauge copper conductor
or No. 12 and 10 gauge
aluminum conductor
• Only one solid ground wire
to be installed per ground clip
Compliance
•
®
– File E195978 (975 only)
992
#14 WIRE
998,
8998-1
993
#12 WIRE
NEW
973,
8973-1
975,
8975-1
G R O U N D I N G P I G TA I L S
C ATA L O G
NUMBER
WIRE LENGTH
6"
8"
DESCRIPTION
S T D.
PKG.
UPC
BAR
CODE
982
994
# 1 4 S o l i d i n s u l at e d c o p p e r w i r e , c a p t i v e 4 - w a y c o m b o
h e a d g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d ( 2 5 p c . b u n d l e s )
1000
—
983
996
# 1 2 S o l i d i n s u l at e d c o p p e r w i r e , c a p t i v e 4 - w a y c o m b o
h e a d g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d ( 2 5 p c . b u n d l e s )
1000
—
8983-1
# 1 2 S o l i d i n s u l at e d c o p p e r w i r e , c a p t i v e 4 - w a y c o m b o h e a d
8 9 9 6 - 1 g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d , p o l y b a g
( 1 0 p c s p e r p o ly b a g )
984
997
#14 Solid bare copper wire, captive 4-way combo head
g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d ( 2 5 p c . b u n d l e s )
1000
—
992
# 1 4 S t r a n d e d i n s u l at e d c o p p e r w i r e , c a p t i v e 4 - w a y
c o m b o h e a d g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d ,
spade terminal one end (100 pc. bundles)
500
—
993
# 1 2 S t r a n d e d i n s u l at e d c o p p e r w i r e , c a p t i v e 4 - w a y
c o m b o h e a d g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d ,
spade terminal one end (100 pc. bundles)
500
—
40 bags*
GROUNDING SCREWS AND CLIPS
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
998
4 - Wa y c o m b o h e a d gr e e n d y e f i n i s h gr o u n d s c r e w f o r 1 0 - 3 2
t a p p e d h o l e , c l a m s h e l l p a c k ag e ( 1 0 0 p c s p e r c l a m s h e l l )
1000
8998-1
4 - Wa y c o m b o h e a d gr e e n d y e f i n i s h gr o u n d s c r e w f o r 1 0 - 3 2
tapped hole, poly bag (10 pcs. per bag)
50 bags*
973
S l o t t e d h e a d gr e e n d y e f i n i s h gr o u n d s c r e w f o r 1 0 - 3 2 t a p p e d
h o l e , c l a m s h e l l p a c k ag e ( 1 0 0 p c s p e r c l a m s h e l l )
1000
8973-1
S l o t t e d h e a d gr e e n d y e f i n i s h gr o u n d s c r e w f o r 1 0 - 3 2 t a p p e d
hole, poly bag (10 pcs. per bag)
50 bags*
975
G r e e n d y e f i n i s h gr o u n d c l i p f o r # 1 4 - # 1 0 AW G c o p p e r,
c l a m s h e l l p a c k ag e ( 1 0 0 p c s p e r c l a m s h e l l )
1000
8975-1
G r e e n d y e f i n i s h gr o u n d c l i p f o r # 1 4 - # 1 0 AW G c o p p e r, p o l y b a g
(10 pcs. per bag)
50 bags*
* O r d e r s t a n d a r d p a c k ag e b a g q u a n t i t i e s o n ly, n o t p e r p i e c e
UPC
BAR
CODE
RACO STEEL BOXES
& COVERS
A58
Add-A-Depth Applications
• Add-A-Depth ring or “goof-ring”
is designed to act as a barrier
between combustible wall surfaces
and the wiring system
• For single and two-gang device
boxes
• There is no UL standard for this
product
• Subject to acceptance by an
electric inspector
The NEC Code States:
370-20. in Wall or Ceiling
• In walls or ceilings of concrete,
tile, or other non-combustible
material, boxes shall be installed
so that the front edge of the box
will not set back of the finished
surface more than 1/4 inch
(6.35 mm). In walls and ceilings
constructed of wood or other
combustible material, boxes shall
be flush with the finished surface
or project there from
Nailing Spur Applications
• Protects nonmetallic sheathed
cable or raceway type wires running through wood studs, joists,
rafters or similar structural wood
members from accidental nail,
screw or drill penetration
• No nails required
Compliance
•
®
– File E195978 (except 976)
2709,
2710
976
ADD-A-DEPTH RING EXTENDS SWITCH BOX SET TOO DEEP IN WALL
C ATA L O G
NUMBER
DESCRIPTION
A d j u s t m e n t r a n g e 1/ 4 " - 1 "
Tw o 1 - 1 / 8 " s c r e w s i n c l u d e d
976
S T D.
PKG.
UPC
BAR CODE
25
CABLE PROTECTOR
C ATA L O G
NUMBER
DESCRIPTION
S T D.
PKG.
2709
Nailing spurs, 3"H x 1-1/2"W x 1/16"D, 1/2" spike
100
2710
Nailing spurs, 3"H x 1-1/2"W x 1/16"D, 1/2" spike
200
UPC
BAR CODE
—
A59
BOX FIRESTOP PRODUCTS
Applications
• The 1999 UL Fire Resistance
Directory (Orange Book) mandates
that “metallic boxes located on
opposite sides of walls or partitions
shall be separated by a minimum
horizontal distance of 24 inches.
This separation distance between
metallic boxes may be reduced
when Wall Opening Protective
Materials (CLIV) are installed with
the metallic boxes”
904
903
• Only one pad is required for
a 1 or 2 hour fire rating
• Using predetermined cut lines, pads
can be cut and inserted on the
inside of any 3" x 2", 4" x 2"
or 4" x 4" steel electrical box
• No additional putty is needed
to plug the end of each electrical
tube or conduit at its connection
to box
• Limit the temperature rise on the
unexposed surfaces
• Easy to install using provided self
adhesive strip
• Highly intumescent
• Non-conductive
• Dielectric breakdown voltage 22V/mil
(ASTMD149)
External Pad Product Features
• RACO® WALL-GUARD putty pads
are applied to the outside of any
steel or nonmetallic electrical outlet
or switch box
• Soft, pliable material is easy to work
with and conforms to contour of any
shape box
• Help reduce sound transmission
through walls
905
Internal/Insert Pad
Product Features
• When exposed to fire, RACO®
WALL-GUARD inserts expand,
forming a “char” that will seal off
the opening and prevent the spread
of flames
ING
COM ON
SO
ING
COM ON
SO
ING
COM ON
O
S
RACO STEEL BOXES
& COVERS
• RACO® WALL-GUARD firestop
products are used in applications
where electrical boxes are
positioned back to back or less
than 24" apart in wall cavities
Compliance
•
®
WALL-GUARD FIRESTOP BOX – INTERNAL/INSERT PADS
C ATA L O G
NUMBER
DESCRIPTION
PA D
SIZE
F U L L PA D
VOLUME
CU. IN.
S T D.
PKG.
903
Each pad – for (1) 4" box, (2) 4" x 2" boxes
or (2) 3" x 2" boxes
4" x 4"
3.5
20
904
E a c h p a d – f o r 3 " x 2 " s w i t c h b o x o n ly
3’ x 2"
1.8
20
UPC
BAR
CODE
WALL-GUARD FIRESTOP BOX – EXTERNAL PAD
C ATA L O G
NUMBER
DESCRIPTION
PA D
SIZE
S T D.
PKG.
905
Soft pliable, putty-pad
7" x 6"
20
UPC
BAR
CODE
RACO STEEL BOXES
& COVERS
A60
S U R FA C E M O U N T B O X E S
4" SQUARE, 4-11/16" SQUARE, HANDY BOXES
ING
COM ON
SO
Applications
• RACO Surface Mount Boxes are
specifically designed for exposed
work, flush mount applications
where an alternative to conduit
grounding is required
• Boxes are installed on walls or
ceilings to support lighting fixtures,
into two or more directions
to bring power to a number
of electrical devices
• Handy boxes are used to house
or outlets and as small
junction boxes
Product Features
• Raised ground screw emboss on
bottom of box eliminates ground
screw/surface interference when
mounted on flat surface
• All RACO Surface Mount Boxes
include a pre-assembled 3-way
ground screw and 8” long, #12
stranded pigtail saving both time
and labor for the installer
Compliance
•
®
189SM
191SM
192SM
232SM
650SM
660SM
663SM
670SM
257SM
258SM
WITH CONDUIT KO’S
C ATA L O G
NUMBER
KNOCKOUTS
DESCRIPTION DEPTH
S I D E S C O N D. B OT T O M C O N D.
CU.
IN.
S T D.
PKG.
189SM
We l d e d
1-1/2" 8-1/2", 4-TKO 2-1/2", 2-TKO
21.0
50
191SM
Drawn
1-1/2"
1-1/2", 3-3/4"
21.0
50
192SM
Drawn
1-1/2" 8-1/2", 4-TKO 2-1/2", 2-3/4"
21.0
50
232SM
We l d e d
2-1/3" 8-1/2", 4-TKO 2-1/2", 2-TKO
30.3
25
CU.
IN.
S T D.
PKG.
50
8-3/4"
UPC
BAR
CODE
4” X 2” SURFACE MOUNT HANDY BOXES
WITH CONDUIT KO’S
C ATA L O G
NUMBER
KNOCKOUTS
DESCRIPTION DEPTH
SIDES
C O N D.
– File E195978
ENDS
C O N D.
B OT T O M
C O N D.
650SM
We l d e d
1-1/2"
6-1/2"
2-1/2"
2-1/2"
11.5
660SM
Drawn
1-7/8"
6-1/2"
2-1/2"
2-1/2"
13.0
50
663SM
Drawn
1-7/8" 4-3/4"
2-3/4"
1-3/4"
13.0
50
670SM
We l d e d
2-1/8" 6-1/2"
2-1/2"
2-1/2"
16.5
50
CU.
IN.
S T D.
PKG.
UPC
BAR
CODE
4-11/16” SQUARE SURFACE MOUNT BOXES
WITH CONDUIT KO’S
KNOCKOUTS
C ATA L O G
NUMBER
DESCRIPTION
189SM
We l d e d
1-1/2" 8-1/2", 4-TKO 2-1/2", 2-TKO
21.0
50
257SM
We l d e d
2 - 1 / 8 " 2 - 1 / 2 ",1 0 - T K O
1-1/2", 1-3/4"
2-TKO
42.0
25
258SM
We l d e d
2-1/8" 8-1"
2-1/2", 2-3/4"
42.0
25
DEPTH
S I D E S C O N D. B OT T O M C O N D.
UPC
BAR
CODE

RACO Steel Boxes and Covers

Transcription

Similar documents

Detailed Specifications

BERKSHIRE | BERKSHIRE XL | BERKSHIRE XLT