Reznor V3-UDSA Gas Fired Unit Heater

UDSA & UDSBD model
Gas-fired unit heaters for indoor installation
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Reznor V3 unit heaters are one of the most
technically advanced products available on the
market today. Incorporating a radical new heat
exchanger and burner. V3 is compact, lightweight and delivers the highest possible
standards of energy efficiency and
performance.
Within the V3 range there are two distinct
types of heaters;
UDSA - models fitted with an axial fan.
With a choice of 24 different units and a
range of heat output ratings from 8 to 100
kW, these models are available with both
horizontal and vertical down flow air discharge.
UDSBD - models fitted with centrifugal blower
in horizontal or vertical orientation. Sixteen
sizes of heaters with heat outputs ranging
from 15 to 64 kW.
Both UDSA and UDSBD heaters are easy to
install and they are suitable for a wide range
of commercial and industrial applications such
as retail premises, sports and leisure halls and
warehouses to mention but a few.
UDSA
TECHNICAL DATA
008
Model
011
015
020
Gas categories
025
030
035
II 2H3+UK
B22, C12, C32, C42, C52, C62, C82
Comb. air and venting; Type B & C Installations 1
Heat input (Hs)
kW
8,8
13,2
17,6
22,0
30,8
35,2
42,2
Heat input (Hi)
kW
7,9
11,9
15,9
19,8
27,8
31,7
38,0
Heat output
kW
7,3
11,0
14,6
18,2
25,5
29,2
34,9
Thermal efficiency (Hi)
%
92
92
92
92
92
92
92
natural gas G20
natural gas G25
m³/h
0,84
1,26
1,68
2,10
2,94
3,36
4,02
m³/h
0,98
1,46
1,95
2,44
3,42
3,90
4,68
propane G31
kg/h
0,62
0,93
1,24
1,55
2,16
2,47
2,96
Gas consumption rate
Rc 1/2
Gas connection size (not Ø supply line size)
K
32
32
32
32
32
32
29
Airflow (15°)
m³/h
680
1020
1360
1700
2385
2725
3510
Motor speed
Vent & combustion air connection collars
rpm
Ømm
1425
1425
1425
1425
950
950
950
80
80
80
80
100
100
100
Recommended maximum hor. mounting height 2
m
m
2,5
2,5
3,0
3,0
3,5
3,5
3,5
8
10
13
16
20
22
25
4
dB(A)
47
46
47
48
50
51
55
Sound pressure level 5
dB(A)
40
39
40
41
43
44
48
Temperature rise
T (±1)
Horizontal air throw 3
Sound pressure level
230/240V 1N ~ 50Hz
Electrical service (protection class IP 20)
Maximum total electrical rating
W
Weight (net)
kg
121
30
33
126
38
273
40
56
60
333
88
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Energy saving
Easy installation and maintenance
4-way heat exchanger achieves over 92% ther-
Up to 25% lighter than similar models and
mal efficiency.
easy to install.
Reduced NOx emissions contribute to protect the
Balanced flue wall terminal provides both flue
environment.
outlet and combustion air inlet, thereby reducing
An improved airflow and a new louvre design
installation time.
give longer air throws and significantly
All connections (gas and electricity) are
reduce stratification within the
accessible at one side of the heater.
building. Consequently,
the units are particularly
suitable for well insulated
Extended operational life
buildings. If necessary, destratification fans can be installed.
The titanium stabilised aluminised steel heat
The aerodynamic heat exchanger profile enables
exchanger is particularly strong and durable
the UDSA model to increase the airflow up to
providing additional temperature resistance.
40% with a 30% reduction of electrical
Its weld free construction ensures long life.
consumption.
Patented self-aligning burner with
single orifice eliminates possible
flame impingement and premature
heat exchanger failure.
Maintenance is very
simple thanks to the use
of a single gas injector
for all models.
043
050
055
064
073
085
100
II 2H3+UK
Application versatility
Both horizontal and vertical downflow units are
B22, C12, C32, C42, C52, C62, C82
50,8
58,6
66,0
77,7
88,0
102,7
117,3
45,8
52,8
59,5
70,0
79,3
92,5
105,7
42,1
48,6
54,7
64,4
73,0
85,1
97,0
92
92
92
92
92
92
92
4,85
5,59
6,30
7,41
8,39
9,79
11,18
5,64
6,50
7,32
8,62
9,76
11,38
13,00
3,57
4,12
4,64
5,46
6,18
7,21
8,24
28
28
28
28
28
28
28
4535
5180
5830
6810
7770
9065
10360
950
950
950
950
950
950
950
available.
Fourteen different heat outputs from 8 to 100 kW.
The smallest unit is only 310mm high - making
it ideal for mounting in confined spaces.
Rc 3/4
100
100
130
130
130
130
130
3,5
3,5
3,5
4,0
4,0
4,0
4,0
28
30
30
33
35
36
39
54
55
56
56
58
59
59
47
48
49
49
51
52
52
490
490
490
678
848
848
848
99
99
112
118
143
158
168
Units may be suspended or base mounted on a
suitable support (fixed or pivoting).
230/240V 1N ~ 50Hz
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
UDSA
HORIZONTAL MODEL
MODEL UDSA DIMENSIONS (mm ± 2)
Size
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
008, 011
307
700
267
404
696
546
131
191
129
67
85
413
16
98
350
120
015
383
700
343
404
723
546
200
191
139
122
86
413
16
98
350
120
020
383
700
343
404
723
546
200
191
139
122
86
413
16
98
350
120
025
586
700
546
404
771
546
368
191
222
122
121
413
16
98
350
140
030
586
700
546
404
771
546
368
191
222
122
121
413
16
98
350
140
035, 043, 050
510
971
456
601
1129 897
371
195
126
166
121
623
33
149
600
140
055, 064
663
971
609
601
1138 897
354
207
150
166
204
623
33
149
600
225
073, 085, 100
865
1040 812
651
1138 897
562
213
299
186
204
673
33
149
600
225
2. Flue connection
3. Gas connection
4. Electrical connections
5. Service panel
Q
E
B
F
A
C
M
D
P
N
1. Combustion air inlet
5
3
SIDE VIEW
FRONT VIEW
1
2
TOP VIEW
J
G
L
R
4
K
H
REAR VIEW
REAR VIEW
(all models except for 035,
043, 050)
(models 035, 043, 050)
BALANCED FLUE WALL AND
ROOF TERMINAL
Type C12
Type C12b
Type C52
Type C32
Type B22
Type B22b
C- type: : the allowed length between the unit heater and the flue terminal amounts to 9m, a 90° bend offering an equivalent
resistance of 1.5m and a 45° bend -0.75m
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
UDSA
VERTICAL MODEL
To ensure that heat losses through the roof are
kept to a minimum and to avoid the occurrence
of stratification, it is possible to suspend the
UDSA unit in a vertical orientation. This way of
suspension allows the unit to dually operate as
a heater and as destratification unit.
The option ‘vertical orientation’ (option number
205.8) can only be applied on the UDSA
models 015, 025, 035, 043, 050, 055, 064,
073, 085 & 100.
All vertical UDSA models are fitted with a 4way outlet grill (no louvres) and can be
functioning as a destratification unit by placing
a destratification thermostat (option 904) on the
unit. The unit now helps ventilating and
recirculating the warm air towards the floor,
resulting in energy savings and climate comfort.
Diffuser grill louvre setting
H
Floor pattern
Maximum mounting height from floor H (m) (1)
Air louvres
Air louvres
Air louvres
Model
Neutral
30°
45°
015
5,0
4,5
4,0
025
6,0
5,0
4,5
035
7,0
6,0
5,5
043
9,0
7,5
7,0
050
10,0
8,5
7,5
055
9,0
7,5
7,0
064
10,5
8,5
8,0
073
10,0
8,0
7,5
085
11,0
9,0
8,5
100
12,0
10,0
9,0
(1) max. mounting heights are defined at a uniform room temperature of 15°C and a temperature rise at
nominal heat output
Q
MOUNTING DATA
M
P
N
MODEL UDSA DIMENSIONS (mm ± 2)
Model
E
F
M
N
P
Q
015
864
686
413
16
67
250
025
918
686
413
16
68
450
035, 043, 050 1270 1037
623
35
55
400
1278 1037
623
35
82
500
073, 085, 100 1317 1057
673
35
183
500
055, 064
for other dimensions: see table indicated as horizontal UDSA model
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
UDSBD
CENTRIFUGAL MODEL
These indirect gas-fired unit heaters have
separated combustion and an atmospheric
burner. The units are equipped with a direct
drive centrifugal blower and they can operate
effectively at a resistance output of up to 150
Pa. Furthermore, there is a choice of three
types of air distribution: plenum type, standard
outlet grill (fitted with vertical louvres) and
downturn nozzles. The unit is also available in
vertical downflow orientation in sizes 015, 025,
* outlet grill is optional
035, 043, 050, 055 and 064.
Designed for recirculation and air distribution
through ductwork UDSBD units are ideal for
open doorway heating (to prevent heat escaping) or for providing temperature controlled
space heating.
UDSBD
TECHNICAL DATA
015
Model
020
025
Gas categories
030
035
043
050
II 2H3+UK
B22, C12, C32, C42, C52, C62, C82
Comb. air and venting; Type B & C Installations 1
Heat input (Hs)
kW
Heat input (Hi)
kW
17,6
15,9
22,0
19,8
30,8
27,8
35,2
31,7
42,2
38
50,8
45,8
58,6
52,8
Heat output
kW
14,6
18,2
25,5
29,2
34,9
42,1
48,6
Thermal efficiency (Hi)
%
92
92
92
92
92
92
92
natural gas G20
natural gas G25
m³/h
1,68
2,10
2,94
3,36
4,02
4,85
5,59
m³/h
1,95
2,44
3,42
3,90
4,68
5,64
6,50
propane G31
kg/h
1,24
1,55
2,16
2,47
2,96
3,57
4,12
Rc 3/4
31
Gas consumption rate
Gas connection size (not Ø supply line size)
Temperature rise
T (±1) 6
Airflow (15°)
K
m³/h
2150
Motor speed
rpm
Standard low, mid or high speed
Recommended maximum hor. mounting height 2
20
Rc 1/2
23
27
25
25
2350
2750
3360
4080
3900
29
950
950
1430
1430
950
950
950
mid
high
low
mid
low
low
mid
4900
m
m
3,5
4
4,5
4,5
5,5
5,5
6
Horizontal air throw 3
18
23
26
26
32
34
38
Sound pressure level 4
dB(A)
50
52
47
51
46
47
52
Sound pressure level 5
dB(A)
57
58
54
58
53
54
59
230/240V 1N ~ 50Hz
1662
1662
1700
1700
1700
131
131
Electrical service (protection class IP 20)
Maximum total electrical rating
W
496
496
Weight (net)
kg
50
53
71
74
125
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
MODEL UDSBD DIMENSIONS (mm ± 2)
Size
A
B
C
D
E
015, 020
383
460
A1
700
343
404
935
546 199,5 191
025, 030
586
590
700
546
404
1185
546 367,5
035, 043, 050
510
670
970
456
601
1610
897
371
055
663
685
970
609
601
1610
897
354
064
663
720
970
609
601
1610
897
354
1. Combustion air inlet
2. Flue connection
F
3. Gas connection
G
H
J
K
139
122
N
P
Q
86
413 15,5
98
350
120
191
222
194
126
122
121
413 15,5
98
350
140
165
121
623
33
148,5
600
140
206
206
150
165
204
623
33
148,5
600
225
150
165
204
623
33
148,5
600
225
4. Electrical connections
L
M
R
5. Service panel
D
FRONT VIEW
REAR VIEW
(models 015, 020,
025, 030, 055, 064)
055
064
66,0
59,5
77,7
70
54,7
64,4
92
92
6,30
7,41
7,32
8,62
4,64
5,46
30
32
5300
5390
950
950
mid
high
6
6
38
38
50
53
57
60
1700
1700
148
153
SIDE VIEW
TOP VIEW
REAR VIEW
(models 035, 043,050)
1) Gas appliance classifications for approved venting methods based on
CEN report - CR1749:2001.
2) Height from floor to bottom surface of the heater. These are RECOMMENDATIONS ONLY. Positioning of unit heaters for proper
performance is application dependent. Operation is affected by other
air moving equipment in the space, obstructions to the airflow,
draughts and/or close proximity doors or windows, etc. Care should
be taken to avoid mounting the heaters above these recommendations, unless downturn nozzle options are used, as significant
stratification may occur, resulting in poor floor coverage and higher
energy losses trough the roof structure.
3) Isothermal conditions , 20 °C ambient air temperature , discharge
louvres , zero deflection , v=0,5m/s.
4) dB(A) values at 5 meters from the unit with reference circumstances
A=160m² and Q=2.
5) dB(A) values at 5 meters from the unit in free field.
6) Values mesured with an external static pressure of 150 Pa.
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
OPTIONS
Unit heater accessories
Flue outlet
• Two stage burner control
• Balanced flue wall and roof terminal
• Modulating burner control
- Aluminised steel plate
• Propane model
- Adjustable chimney for pitched roof.
• Destratification thermostat
• Heat exchanger SS 409
Mounting
• Diffuser grill with horizontal louvres
• Both fixed or pivoting wall brackets are
available.
• 30° and 60° discharge nozzle
• Vertical louvres
• Duct flange *
Wall brackets for UDSA models 008-030
• Constant running fan *
30° or 60° discharge nozzle
Control equipment
Wall brackets for UDSA models 035-100
• Combined thermostat with
burner ‘on’ indicator
and reset-function.
• One or two stage clock
thermostat with burner
‘on’ indicator and reset.
• Energymizor thermostat with time and temperature
control for one stage, two stage and modulating
REZNOR unit heaters. The microprocessor adjusts the
heating period and the air temperature.
Several thermostats can be
Pivoting wall bracket for UDSA models
connected together.
- Room temperature sensor for space heating.
- In-duct temperature sensor for warm air inlet system.*
• Two stage duct thermostat. *
* UDSBD models only
Company Standards and Services:
All Reznor products are tested and approved to CE standards. Reznor Europe nv is assessed to GASTEC EN ISO 9001: 2000 Quality
Assurance. Reznor offers a service to its customers; including budget schemes, on site technical support and a comprehensive after-sales
package. Reznor reserves the right to change specifications without prior notice.
J&M Sabbestraat 130
B-8930 Menen
Reznor Europe N.V.
Belgium • www.ReznorOnline.com
E-mail: [email protected]
Tel. +32(0) 56 52 95 11
Fax. +32
(0) 56 52 95 33
Wijzigingen
voorbehouden
e-mail: [email protected]
Cooke website:
Industries
- Phone: +64-9-579 2185 Fax:
+64-9-579
2181
Web:Group
www.cookeindustries.co.nz
A T&B
Company
G A
S T E
C Email: [email protected]
www.reznor.be