PRODUCT CATALOGUE - VGE International B.V.

Transcription

W W W . X C L E A R . N L
MEMBER OF:
PRODUCT
CATALOGUE
2015/2016
INTRODUCTION
WELCOME
A pond means life in your garden. To make the life of your pond’s flora and fauna the best as possible, it is required
to keep the water in perfect condition and balance. To ensure this, you have to rely on your filter technology every
day.
The Xclear Filter range and UV-C purifiers are the best
solutions for keeping your pond water healthy and crystal
clear. Next to these purifiers and filters, Xclear offers water
treatment products and other pond supplies. From a
professional koi pond to a “do it yourself” pond; Xclear
pond products are applicable for every situation.
Xclear is a trademark of VGE International B.V. located
in Eindhoven, The Netherlands. More than thirty years
of experience resulted in high quality and innovative
products for the pond, pool and industrial market. At
the VGE International headquarters, Xclear products
are designed, produced and assembled. A team of
professional sales and service representatives are in contact
with customers in more than 70 countries worldwide.
Innovation is of paramount importance to VGE International
B.V. Therefore, the company has its own product development
department, which regularly introduces new products and
product improvements. Innovative thinking is one of our main
strengths. VGE International develops products which are
customized to today’s pond trends and customer needs.
The successful Xclear product range is also available for
private labeling. Please contact our sales department for
details.
CONTACT:
VGE International B.V.
Ekkersrijt 7408, 5692 HK Son
The Netherlands
T: +31 (0)499 461 099
F:+31 (0)499 494 229
FOR MORE INFORMATION:
[email protected]
www.vgebv.com
www.xclear.nl
www.facebook.com/vgebv
www.facebook.com/xclear
PRODUCT CATALOGUE 2015 - 2016
INDEX
UV-C DISINFECTION
UV-C PURIFIERS
4
5-14
POND EQUIPMENT AND SUPPLIES 26-34
Fish Tank 600L | Topfilter 220L | Filter Media Bags | Bio Balls
Bio Blocks
26
Economy UV-C | Multimax UV-C | Ultraflex UV-C
6
Threaded Tank Connector | Tank Connector
Professional UV-C | TL+ UV-C | TL Koi Timer UV-C
7
(Aerated) Bottom Drain 27
Flex UV-C | Tech UV-C | Marine UV-C
8
Slide Valve | Dirty Harry Pre-Filter
28
Jumbo Tech UV-C | 130W Amalgam UV-C with Flow Switch
Professional UV-C Ø110
9
2- and 3-Way Cylinder Valve | Automatic 2- & 3-Way Cylinder Valve
29
Multipower Eco | Floating Feeding Ring | Anti-Ice Device + Venturi
30
Immersion UV-C | In-Line UV-C
10
Pond Safety Net | Pond Defence | Eco Switch
31
Ozone Redox Turbo3 LP UV-C | Ozone Redox Turbo3 HP UV-C
11
Pond Dispense | Profi-Heater | Anti Algae Copper Electrolyzer
32
Pro UV-C | Pro Buster UV-C
12
SMS Alert | Flow Switch | Static Mixer
33
Master Blaster
13
Fish Feeder | Fish Food
34
UV-C LAMPS
PL Lamps | TL Lamps | T5 Lamps | Unit Specific Lamps
15-17
16-17
POND FILTERS AND ACCESSORIES 19-25
WATER TREATMENT
35-37
Pond Support Maërl | Pond Support GH+ | Pond Support pHPond Support KH+l | Pond Support Oxypower | Pond Support
Algae Remover
35
Bank Filter
19
Pond Support Bacto Dry | Pond Support Pond Maintenance Bacteria
Biosteps | 3 Chamber Filters with and without UV-C
20
Pond Support Nitrifying Bacteria | Pond Support Anti Sludge Bacteria
Connect Clear Modular Filter Systems
21
Pond Support Pond Salt | Pond Salt | Activated Carbon
Biosieve | Profi Cloverleaf Filter
22
Pond Support Lactic Acid Bacteria | Pond Support Bacto Gel
Sieve Pump Fed | Sieve Gravity Fed
23
Pond Support Bacto Liquid
Beadfilters | Beadfilter bypass
24
Flow-Matic Automatic Backwash-system
25
36
37
DELIVERY CONDITIONS
SPARE PARTS
PVC
38
39 - 47
PVC
A PVC housing is highly resistant to corrosive water,
and therefore very suitable for salt water applications.
STAINLESS STEEL HOUSING:
A stainless steel interior provides a reflection of UV
radiation and this increases the efficiency of the
radiation by up to 35%. In addition, the stainless
steel ensures a longer life of the housing.
ALU
ALUMINIUM HOUSING OR INTERIOR:
An aluminium housing or coating on the inside
provides a reflection of the UV-C radiation and this
increases the efficiency of the radiation by up to 35%.
PRODUCT CATALOGUE 2015 - 2016
UV-C DISINFECTION
UV-C TREATMENT
Over 100 years ago German scientists discovered that the top surface of lake-water was sterile when
exposed to sunlight. Investigation led to the discovery of Ultraviolet light. Situated in the electromagnetic spectrum between X-rays and visible light, Ultraviolet (UV) light has many beneficial properties.
UV light is split into four main categories, UV-A, UV-B, UV-C and Vacuum UV. The UV-C spectrum (200
to 280 nanometers) is the most lethal range of wavelengths for microorganisms. This range, with 254
nanometers being the peak germicidal wavelength, is known as the Germicidal Spectrum. UV-C light
has the ability to cause permanent damage to a wide variety of nuisance microorganisms in water.
THE TARGETED MICROORGANISM
Each type of microorganism requires a specific UV-C radiation exposure rate to successfully complete the
disinfection process. The targeted microorganism must be directly exposed to the UV-C radiation long enough
for the radiation to penetrate the microorganism’s cell wall. However, it takes only seconds for UV-C light rays
to inactivate waterborne microorganisms by breaking through the microorganism’s cell wall and disrupting
their DNA. This often totally destroys the organism, or at the very least will impair its ability to reproduce.
UV-C LAMP LIFESPAN
TL-, PL- and T5 UV-C lamps have an average lifespan of 9000 hours (± 1 year). After that the lamp will
still function for less than 80% and the strength is too low to kill algae and bacteria. Amalgam lamps
have a lifespan of 12000 hours (± 1,5 years).
UV-C BENEFITS
• The solution against green pond water
• UV-C is effective against all micro-organisms
• Improved water quality
• A crystal clear pond
• Protects fish from germs and harmful micro-organisms
• Less energy and maintenance costs
• No harmful chemicals needed
• UV-C is a non-hazardous, green technology
• Cannot be overdosed
4 | PRODUCT CATALOGUE 2015 - 2016
UV-C PURIFIERS
A UV-C purifier is indispensable to any pond. UV-C Light ensures healthy circumstances of flora and
fauna in and around the pond. UV-C makes sure that harmful bacteria and other micro-organisms are
rendered harmless which ensures a clear and healthy pond. The user-friendly range of Xclear UV-C
purifiers are the solution for these common pond problems. The wide range Xclear UV-C is thoughtfully
designed and tested with a strong focus on low-maintenance, safe and easy to apply pond solutions.
Item No.
Type
XE01052
Economy UV-C 5 Watt
XE01092
Economy UV-C 9 Watt
XE01112
Economy UV-C 11 Watt
XE02052
MultiMax UV-C 2.500L / 5 Watt
XE02092
XE02112
XE03182
Ultraflex UV-C 18 Watt
XE03362
XE03752
Ultraflex UV-C 75 Watt T5
XH01182
Professional UV-C 18 Watt
XH01362
XH01552
XH02102
TL+ UV-C 5.000 / 10 Watt
XH02152
TL+ UV-C 10.000 / 15 Watt
XH02252
TL+ UV-C 20.000 / 25 Watt
XH02302
TL+ UV-C 30.000 / 30 Watt
XH02552
TL+ UV-C 55.000 / 55 Watt
XH03302
TL Koi Timer UV-C 30 Watt
XH03552
TL Koi Timer UV-C 55 Watt
XE04402
Flex UV-C 40 Watt
XE04752
Flex UV-C 75 Watt
XE05402
Tech UV-C 40 Watt
XE05752
Tech UV-C 75 Watt
XH10402
Marine UV-C 40 Watt
XH10752
Marine UV-C 75 Watt
XH04402
Jumbo Tech UV-C 40 Watt
XH04752
XH06132
130 Watt Amalgam UV-C with flow switch
XH07552
Professional UV-C Ø 110 TL 55 Watt
XH07752
Professional UV-C Ø 110 T5 75 Watt
XH07132
Professional UV-C Ø 110 Amalgam 130 Watt
XE06752
Xclear In-Line UV-C 75W
XH08752
Ozone Redox Turbo3 low pressure UV-C
XH09752
Ozone Redox Turbo3 high pressure UV-C
XP02752
Pro UV-C 75.000l/ 75 watt (black)
XP02132
Pro UV-C amalgam 150.000l/ 130 watt (black)
XP0631302
Xclear Pro Buster UV-C 450M³ / 390W
XP0733252
Master Blaster 3 X 325 Watt
XP0763252
Master Blaster 6 X 325 Watt
4053510
Bank filter 25L + a/d/s Design
4053515
4053520
4053720
Biosteps
4056605N
Xclear 3 chamber filter 220L
4056604N
Xclear 3 chamber filter 220L + UV-C
4056607N
Xclear 3 chamber filter 330L
4056606N
Xclear 3-chamber filter 330L + UV-C
4053700
Connect Clear 80L
4053709
Vortex Connect Clear in doos
4053705
Connect Clear Super 150L
4058000
BioSieve
4058001
Xclear Sieve Pump Fed
4058002
Xclear Sieve Gravity Fed
4053768
Xclear Beadfilter 400
4053769
4053772
4053773
4053774
4053775
Xclear Beadfilter Bypass 400-500-600
4053776
Xclear Beadfilter Bypass 750-900
Weight
Length
Width
Height
Quantity
full pallet
EAN
1,4
1,5
1,6
1,7
1,8
1,9
2,9
3,1
3,5
3,1
3,8
4,2
1,9
2,1
2,1
3,8
3,4
4,8
4,8
3,2
3,2
3,5
3,9
4,1
4,3
4,4
4,7
4,9
6,1
5,1
7,1
4,2
15,1
7
8,5
8,3
19,3
170
165
4,4
5,1
6,7
13,2
18
20,3
25,9
28,2
14,8
14,2
16,5
28,7
9
24
55,2
65
101,2
156
229
2,9
4,8
31
31
31
31
31
39
25
32,5
28
25
33
28
48
16
16
16
16
101
101
21
21
18
18
28
101
28
28
28
27
27
27
28
116
101
105
105
40
187
187
---39
99
99
101
101
62
70
69
49
50
72
120
120
120
120
120
45
51
23
23
23
23
23
24
55
55
100
55
55
75
15
58
58
98
98
27
27
77
77
77
77
101
27
99
99
99
103
103
103
99
42
27
26
26
103
109
109
Ø 39
Ø 39
Ø 39
38
44
44
70
70
49
70
69
67
37
39
80
80
80
80
100
42
46
11
11
11
11
11
11
12
12
12
11
12
12
9
9
9
9
9
14,5
14,5
13
13
13
13
145
15
12
12
12
14
14
14
12
17
15
18
18
34
85
84
33
43
58
52
71
71
72
72
77
78
78
91
55
101
55
70
95
140
140
26
36
100
100
100
100
100
100
60
40
30
54
40
40
100
100
100
50
50
24
24
60
60
60
60
30
30
30
30
30
24
24
24
30
14
24
18
18
8
1
1
36
24
18
16
16
16
12
12
3
2
2
2
18
7
1
1
1
1
1
---
8714404009089
8714404009157
8714404009010
8714404029322
8714404029391
8714404029469
8714404043267
8714404043274
8714404044172
8714404037730
8714404037808
8714404037877
8714404030403
8714404030472
8714404030540
8714404030618
8714404030687
8714404038577
8714404038584
8714404042802
8714404042819
8714404039116
8714404039123
8704404044189
8714404044196
8714404034869
8714404034791
8714404030052
8714404004329
8714404004398
8714404004466
8714404044202
8714404035705
8714404037594
8714404038539
8714404038546
8714404044219
8714404044226
8714404044233
8712718006039
8712718006046
8712718006053
8714404029537
8714404044080
8714404044097
8714404044103
8714404044110
8714404027786
8714404032575
8714404027854
8714404030625
8714404043281
8714404043298
8714404043182
8714404043199
8714404043205
8714404043212
8714404043229
8714404043243
8714404043250
PRODUCT CATALOGUE 2015 - 2016 | 5
UV-C PURIFIERS
ECONOMY UV-C
The Economy UV-C is designed for small ponds.
• Keeps your pond clear and your fish healthy.
• Including hose connectors 1” – 25/20/15.
• Friendly price range.
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
XE01052
5W Economy
5 Watt PL-S
2.500 L
1.500 L/h
1 Bar
XE01092
9W Economy
9 Watt PL-S
7.000 L
3.000 L/h
1 Bar
XE01112
11W Economy
11 Watt PL-S
10.000 L
5.000 L/h
1 Bar
MULTIMAX UV-C
Max. Pressure
The Multimax UV-C is suitable for freshwater
environments and freshwater aquariums.
• Lined inside with reflecting aluminum which
increases the UV-C radiation with 35% and
prevents wear of the unit’s inside.
• Equipped with a Philips PL UV-C lamp.
• The ballast is integrated in the house.
• Including hose connectors 1"-32/25/20 mm.
ALU
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Pressure
XE02052
5W MultiMax
5 Watt PL-S
2.500 L
1.500 L/h
1 Bar
XE02092
9W MultiMax
9 Watt PL-S
7.000 L
3.000 L/h
1 Bar
XE02112
11W MultiMax
11 Watt PL-S
10.000 L
5.000 L/h
1 Bar
ULTRAFLEX UV-C
The UltraFlex UV-C is extremely suitable for
installing the purifier with total flexibility.
• Provides 360° installation possibilities.
• Less pressure loss because of straight union.
• Including 63mm PVC unions with adaptors
to 50mm/1½” fem. threading.
• These purifiers come with hose
connectors 1½” – 40/32/25 mm.
ALU
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Pressure
XE03182
18W PL Ultraflex
18 Watt PL
15.000 L
6.000 L/h
2 bar
XE03362
36W PL Ultraflex
36 Watt PL
35.000 L
10.000 L/h
2 bar
XE03752
75W T5 Ultraflex
75 Watt T5
70.000 L
20.000 L/h
2 bar
PLEASE REFER TO PAGE 39 - 47 FOR SPARE PARTS
PROFESSIONAL UV-C
The Professional UV-C is equipped with high-quality
components combined with a Philips PL UV-C lamp.
• Guaranteed maximum performance and durability.
• Stainless Steel body for maximum durability.
• These purifiers come with 63mm PVC unions with
adaptors to 50mm/1½” fem. threading.
• These purifiers come with hose
connectors 1½” – 40/32/25mm.
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
XH01182
18W Professional
18 Watt PL-L
15.000 L
6.000 L/h
2 Bar
XH01362
36W Professional
36 Watt PL-L
35.000 L
10.000 L/h
2 Bar
XH01552
55W Professional
55 Watt PL-L
55.000 L
15.000 L/h
2 Bar
TL+ UV-C
Max. Pressure
The TL+ UV-C is equipped with high-quality components
combined with a Philips TL UV-C lamp.
•
•
•
•
Available in a wide range from 10 watt to 55 watt.
Maximum performance and durability.
Stainless Steel body for maximum durability.
Including hose connectors 32/25/20mm.
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Pressure
XH02102
10 Watt TL+
10 Watt TL
5.000 L
3.000 L/h
2 Bar
XH02152
15 Watt TL+
15 Watt TL
10.000 L
5.000 L/h
2 Bar
XH02252
25 Watt TL+
25 Watt TL
20.000 L
8.000 L/h
2 Bar
XH02302
30 Watt TL+
30 Watt TL
30.000 L
10.000 L/h
2 Bar
XH02552
55 Watt TL+
55 Watt TL
55.000 L
10.000 L/h
2 Bar
TL KOI TIMER UV-C
The TL Koi Timer UV-C contains an integrated timer,
so it is very suitable for environments where the
disinfection hast to be monitored on a regular basis.
• Integrated timer accurately monitors
the number of operating hours.
• Lamp replacement indication.
• Stainless Steel body for maximum durability.
• Equipped with a Philips TL UV-C lamp.
• Including hose connectors 1½” – 40/32/25mm.
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
XH03302
30W TL Koi Timer
30 Watt TL
30.000 L
15.000 L/h
2 Bar
XH03552
55W TL Koi Timer
55 Watt TL
55.000 L
20.000 L/h
2 Bar
Max. Press.
UV-C PURIFIERS
FLEX UV-C
The Flex UV-C is an excellent solution when multiple
flexible installation options are needed.
• Multiple installation options thanks
to the connection options.
• Including 63mm PVC unions including
adaptors to 50mm/1½” fem. threading.
• The length of the purifier is only 85cm.
ALU
With 4 connections!
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Press.
XE04402
40W Flex
40 Watt T5
40.000 L
20.000 L/h
2 bar
XE04752
75W Flex
75 Watt T5
75.000 L
25.000 L/h
2 bar
TECH UV-C
Because of its short length and compact size, the
Tech UV-C is ideal for filter installations where space is
limited but a high disinfection efficiency is needed.
•
•
•
•
•
Easy to install.
Equipped with a 40 watt or 75 watt T5 UV-C lamp.
Competitively priced.
Including 63mm PVC unions including
adaptors to 50mm/1½” fem. threading
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Press.
XE05402
40W Tech UV-C
40 Watt T5
40.000 L
20.000 L/h
2 Bar
XE05752
75W Tech UV-C
75 Watt T5
75.000 L
25.000 L/h
2 Bar
MARINE UV-C
The Marine UV-C purifier is very suitable to treat water
in salt water applications like sea water tanks.
• Ensures fresh, clean and clear water.
• Widely used for water treatment in aquaculture,
agriculture and sea water tanks.
• Special reactor made of extra UV-C stabilized PVC.
• Including A Philips High Performance low
pressure Smart Cap UV-C lamp.
• Flexible installation options with 63/50mm glue connections.
• Reactor shape ensures optimal installation flexibility
• Disinfects marine water efficiently and safely.
• Protects your marine water from germs
• Including 1½” female threading.
PVC
• Including hose tails 25/32/40mm.
Item. No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Press.
XH10402
40W Marine UV-C
40 Watt T5 Smart Cap
40.000 L
10.000 L/h
2 Bar
XH10752
75W Marine UV-C
75 Watt T5 Smart Cap
75.000 L
15.000 L/h
2 Bar
XH11402
40W Marine UV-C short
40 Watt T5 length: 365 mm
30.000 L
10.000 L/h
2 Bar
JUMBO TECH UV-C
The Jumbo Tech UV-C purifier is designed for ponds where
a guaranteed contact time with UV-C is necessary.
•
•
•
•
High intensity disinfection performance.
85 Centimeter lamp for longer contact time with UV-C light.
Including 63mm PVC unions with adaptors
to 50mm/1½” fem. threading
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Pressure
XH04402
40W Jumbo Tech
40 Watt Tech T5
40.000 L
20.000 L/h
2 Bar
XH04752
75W Jumbo Tech
75 Watt Tech T5
75.000 L
25.000 L/h
2 Bar
130W AMALGAM UV-C
WITH FLOW SWITCH
Item No.
Type
XH06132
130W Amalgam UV-C
PROFESSIONAL UV-C Ø110
The 130 watt amalgam UV-C purifiers are suitable for environments
where consistency of powerful radiation is required at all times.
• Including a flow switch to switch off the
lamp when there is no water flow.
• Equipped with a high-quality 130W Philips Amalgam lamp
• Amalgam lamps are not affected by
temperature fluctuations in the water.
• Generates a constant, powerful radiation.
• Stainless steel body for maximum durability.
• Including hose connectors
1½” – 40/32/25mm.
UV-C Lamp
Pond volume
Max. flow
Max. Press.
130 Watt Amalgam
130.000 L
30.000 L/h
2 Bar
The professional UV-C is the best solution
to reduce head pressure losses.
•
•
•
•
•
110mm connections.
110mm diameter stainless steel body for maximum durability.
Ideal for gravity systems.
Ideal in combination with low pressure pumps.
Available with a Philips TL, T5 or amalgam
lamp for optimal performance.
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Press.
XH07552
55W Professional
55 Watt TL
55.000 L
12.000 L/h
2 Bar
XH07752
75W Professional
75 Watt T5
75.000 L
20.000 L/h
2 Bar
XH07132
130W Professional
130 Watt Amalgam
130.000 L
40.000 L/h
2 Bar
UV-C PURIFIERS
IMMERSION UV-C
Submersible UV-C lamps have a big advantage compared to
conventional UV-C units: no pressure loss.
• These lamps can be used in filter tanks so the water
can pass without any resistance/ pressure loss.
• The plastic end of the lamp has a 32mm diameter so you
can use 32mm pipe clips to mount the lamp in a tank.
• A special tank connector is available for direct
installation in i.e. filters (see picture).
7201269
NOTE:
• This product is only intended for professional use.
• It should be installed in a professional application
or assembled with other appliances.
• Before using this product the installer/user must
take care the product complies to the latest
local applying standards for UV-C units.
Item No.
Type
UV-C Lamp
XP01402
40W Immersion UV-C
40 Watt T5
XP01752
75W Immersion UV-C
75 Watt T5
XP01402.1
40W Immersion Amalgam UV-C
40 Watt Amalgam
XP01802
80W Immersion Amalgam UV-C
80 Watt Amalgam
IN-LINE UV-C
The In-Line UV-C is the answer for an effective and safe
water disinfection in open and closed (filter)systems like
multi-chamber filters, drum filters and buffer tanks.
FUNCTION
With the tank connector the In-Line UV-C is easy to integrate
in any system by mounting it in the (filter)wall. Choosing
for complete, partly or separate water flow makes the InLine UV-C versatile for any situation. The flow body and
safety switch make the In-Line UV-C a perfect alternative
for the well-known submersible (immersion) UV-C units.
BENEFITS
• Easy to mount in (multi-chamber)filters,
drum filters, buffer tanks, etc.
• Safe to use due to flow body and safety switch
• Does not harm biological life in the filter
• Does not damage filter media
• Compact to build in, no extra separate
unit in technical filter room
• The water is forced to flow close to the lamp
• Variable output direction (1 ½” female threaded)
• Corrosion free PVC body
• Comes with hosetail 1½” x 40/32/25 mm
• 84 cm length
PVC
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Press.
XE06752
In-Line UV-C 75 Watt
75 Watt T5
75.000 L
16.000 L/h
2 Bar
OZONE REDOX TURBO3
LOW PRESSURE UV-C
The Ozone Redox Low Pressure UV-C is an excellent solution
to combine ozone and low pressure UV-C in one unit.
OPERATION
The air pump pushes air past the combination lamp which
produces about 0.6 grams of ozone. The ozone loaded air is
mixed with water in the static mixer where the oxidation process
takes place. The water mixed with ozone is then pumped
through the combination lamp again but now on the outside
of the quartz glass. The water is exposed to UV-C radiation
so that nearly all algae, bacteria and viruses are killed. The
UV-C radiation will also break down any residual ozone.
•
•
•
•
•
•
•
•
•
•
•
Including venturi system and UV-C/Ozone combination lamp.
No residual ozone left in the water flowing out.
Enriches the pond water with oxygen.
Reduces pathogens.
Reduces algae growth.
Removes organic matter.
Removes yellow colorants in the water.
Supports the performance of biological filters.
Reduces ammonia level.
Reduces nitrite level.
Item No.
Type
XH08752
Redox Ozone LP
OZONE REDOX TURBO3
HIGH PRESSURE UV-C
TIP: The optimal life-span of the T5 lamp regarding
UV-C is ± 9000 hrs. For the ozone producing part this is
about 4500 hrs. After this period of time the intensity
decreases. When you replace the lamp in March there
will be enough ozone-production for the whole season
(from March to September) and there will be enough
UV-C radiation for a whole year!
Item No.
Type
XH09752
Redox Ozone HP
Ozone UV-C Lamp
Pond volume
Max. flow
Max. Press.
75 Watt
50.000 L
20.000 L/h
1 Bar
The Ozon Redox High Pressure is the ideal unit to
combine ozone and Tech UV-C technology.
OPERATION
Air is sucked in past the combination lamp, which produces
about 0.6 grams of ozone. The ozone loaded air is introduced
into the Venturi system and is mixed with water. The water
mixed with ozone is then pumped through the combination
lamp again but on the outside of the quartz glass. The water
is exposed to UV-C radiation (25.000 mW UV-C Output)
so that nearly all algae, bacteria and viruses are killed. The
UV-C radiation will also break down any residual ozone.
•
•
•
•
•
•
•
•
•
•
Including Venturi system and UV-C/Ozone combination lamp.
No residual ozone left in the water flowing out.
Reduces pathogens.
Reduces algae growth.
Removes organic matter.
Removes yellow colorants in the water.
Supports the performance of biological filters.
Reduces ammonia level.
Reduces nitrite level.
Ozone UV-C Lamp
Pond volume
Max. flow
Max. Press.
75 Watt
50.000 L
25.000 L/h
3 Bar
VGE PRO SERIES
The product range of the VGE Pro Series is especially designed for the use in
professional areas. On the next pages you will find a selection of the VGE Pro
products that is appropriate for the use in ponds. You can find the complete
range in the VGE Pro catalogue or at the website www.vgebv.nl.
PRO UV-C
The Pro UV-C purifier is the driving force for
large (professional) pond installations.
• Ability to keep large ponds free of algae, bacteria and fungi.
• Designed to connect easily in large (professional) filter installations.
• Full 316L stainless steel body for maximum
performance and durability.
• Equipped with a high quality Philips UV-C lamp.
• Including a flow switch to switch off the lamp
when there is insufficient water flow.
• Generates a constant, powerful radiation.
• Integrated timer accurately monitors the number of operating hours.
• Lamp replacement indication.
• The length of the purifier is 100cm.
• 120mm diameter.
• Including 2” male threaded connections.
Item No.
Type
UV-C Lamp
Pond volume
Max. flow
Max. Press.
XP02752
75W Pro
75 Watt T5
75.000 L
20.000 L/h
5 Bar
XP02132
130W Pro
130 Watt Amalgam
130.000 L
40.000 L/h
5 Bar
PRO BUSTER UV-C
The Pro Buster UV-C is suitable for large pond and aquaculture projects
up to 450.000 liters. This UV-C purifier is known for it’s disinfection
power when the maximum is requested from the use of UV-C.
• Neutralizes bacteria (including Legionella bacteria), viruses
and other primitive organisms and prevents propagation.
• Designed to connect easily in large
(professional) filter installations.
• Full 316L stainless steel body for maximum
performance and durability.
• Including 3 powerful 130 watt Philips Amalgam lamps
• Including a flow switch that turns off the
lamp when there is insufficient flow.
• Digital indication when the lamp needs replacing.
• Including 3" male threaded connections.
• Length: 95 cm.
• Diameter: 15,8 cm
TIP: The 150.000 Amalgam lamp is less influenced by
temperature swings of the water and gives a constant
powerful radiation.
Item No.
XP0631302
Type
Pro Buster UV-C
UV-C Lamp
Pond volume
Max. flow
Max. Press.
3 x 130W Amalgam
450.000 L
60.000 L/h
5 bar
MASTER BLASTER
The Master Blaster UV-C is designed to treat highly
polluted pond water and is also often used in aquaculture
projects. The Master Blaster is a result of many years of
experience in the professional water treatment industry.
• Including high performance 325 watt low
pressure amalgam UV-C lamps.
• The reactor is made of HDPE with two flanged connectors.
• Including an alarm indicator light.
• Including a digital UV lamp lifespan indicator.
• Including an UV sensor at 254 nm.
• Including a separate controller cabinet guaranteeing
maximum UV efficiency and control.
• Very effective disinfecting performance.
• Usage of low pressure amalgam lamps to achieve required
performance levels irrespective of water temperature.
• Possibility to customize your own Master Blaster
(number of lamps, wattage of the lamps, etc.).
1,63 mtr.
Pond
Item No.
Max. Flow
rate in m3/h
XP0733252
150
150
XP0763252
250
200
Performance in
millijoules/cm2 at
actual recommended
flow rates
UV-C lamp:
Number power
consumption
Height of
reactor
in mm
Diameter
of reactor
in mm
160
44
3x 325W
1630
315 x 7.7
225
50
6x 325W
1630
315 x 7.7
Connection Connection
DN
mm
UVC Germicidal Lamps
Global Leaders
Light Sources and Lighttech, global leaders in UVC Germicidal
Lamps, offer unmatched innovation in the design and manufacture
of our lamp products. With both of our state of the art
manufacturing facilities, we can supply the world market with
high-quality standard lamp designs as well as custom designed
lamp solutions for your specific applications.
- Amalgam Lamps
- Soft Glass
- U Shaped
- Cell Lamps
- Compact Lamps
- Standard Output
- High Output
- Ozone Producing
- Medium Pressure (MPUV/MPHO)
- OEM - Proprietary Base Solutions
- Custom Lamp Configurations
UV-C LAMPS
UV-C LAMPS
The lamps in a UV-C purifier should be replaced annually for optimal disinfection performances.
To replace these lamps, VGE International has a wide range of high quality UV-C lamps for
nearly all UV-C purifiers. For the professional market it's also possible to deliver special high
quality lamps with a higher wattage. For example lamps of 325 and 400 watt. Please contact
us at +31 499 461099 or by e-mail: [email protected] for the actual prices and delivery times.
PL-S LAMPS are compact UVC
(germicidal) lamps used in residential
water and air disinfection units. The
compact size of the lamp allows for
a small system design and design
flexibility. Thanks to the single-ended
lamp base, lamp replacement is easy.
PL-L LAMPS are compact UVC
(germicidal) lamps used in water and
air disinfection units. The compact
size of the lamp allows for a small
system design and design flexibility.
Thanks to the single-ended lamp
base, lamp replacement is easy.
TL MINI LAMPS are slim double-ended
UVC (germicidal) lamps used in residential
water and air disinfection units. The small
16 mm diameter of the lamp allows for a
small system design and design flexibility.
T5 LAMPS are single ended UVC
(germicidal) lamps used in professional
water and air disinfection units. The
small 16 mm diameter of the lamp
allows for a small system design and
design flexibility. T5 lamps offer almost
constant UV output over their complete
lifetime, for maximum security of
disinfection and high system efficacy.
The PHILIPS SMART CAP technology is
a new development for optimal safety!
The lamp foot and the fitting, that goes
into the housing of the lamp, are both
provided with a safety switch. As soon
as the lamp is taken out of the housing,
the power supply is interrupted. Hence
you won´t be able to look into the
burning UVC-lamp. This guarantees
optimal safety during maintenance.
PHILIPS T6 TUV AMALGAM XPT
system consists of an electronic driver
that operates one TUV Amalgam XPT
lamp, mounted in a sleeve. The electrical
specifications are tailored to the lamp,
ensuring an optimized performance of
the Philips TUV Amalgam XPT system.
Thanks to extensive testing before a
lamp system is released, we can ensure
maximum reliability and long lifetime.
TL LAMPS are double-ended
UVC (germicidal) lamps used in
professional air disinfection units.
Moreover, they have a long and reliable
lifetime, which allows maintenance
to be planned for in advance.
UV-C LAMPS
A
B
C
D
E
G
H
I
J
K
F
PL LAMPS
Art. Nr.
Brand
PL lamps
Box
Type
3903005
Philips
PL-S lamp 5 Watt
10
PL-S
Model
A
3903009
Philips
PL-S lamp 7 Watt
10
PL-S
A
3903010
Philips
PL-S lamp 9 Watt
10
PL-S
A
3903020
Philips
PL-S lamp 11 Watt
10
PL-S
A
3903030
Philips
PL-L lamp 18 Watt
25
PL-L
B
3903033
Philips
PL-L lamp 24 Watt
25
PL-L
B
3903040
Philips
PL-L lamp 36 Watt
25
PL-L
B
3903050
Philips
PL-L lamp 55 Watt
1
PL-L
B
J
B212012
Philips
PL-S Module 12 Watt Spa UV-C
1
PL-S
B212012 USA
Philips
PL-S Module 15 Watt Spa UV-C
1
PL-S
J
4600003
Philips
Replacement lamp 60 Watt Aetaire
1
PL-L
B
3903006
Xclear
PL-S lamp 5 Watt Economy
20
PL-S
A
3903011
Xclear
20
PL-S
A
A
3903021
Xclear
20
PL-S
3903034
Xclear
PL-L lamp 18 Watt Economy
25
PL-L
B
3903037
Xclear
25
PL-L
B
3903045
Xclear
25
PL-L
B
3903054
Xclear
25
PL-L
B
E801406
LightTech
PL Lamp 11 Watt Compact4Pool
1
PL-S
A
Model
TL LAMPS
Art. Nr.
Brand
TL lamps
Box
Type
3903556
Philips
TL lamp 4 Watt
25
TL
I
3903557
Philips
TL lamp 6 Watt
25
TL
I
3903558
Philips
TL lamp 8 Watt
25
TL
I
3903559
Philips
TL lamp 10 Watt
25
TL
I
3903563
Philips
TL lamp 11 Watt
25
TL
I
3903560
Philips
TL lamp 15 Watt
25
TL
I
3903574
Philips
TL lamp 16 Watt
25
TL
I
3903561
Philips
TL lamp 25 Watt
25
TL
I
3903564
Philips
TL lamp 30 Watt
25
TL
I
3903565
Philips
TL lamp 36 Watt
6
TL
I
3903562
Philips
TL lamp 55 Watt
6
TL
I
3903070
Xclear
TL lamp 25 Watt
25
TL
I
3903071
Xclear
TL lamp 30 Watt
25
TL
I
3903072
Xclear
TL lamp 55 Watt
25
TL
I
T5 LAMPS
Art. Nr.
Brand
T5 lamps
Box
Type
E800900
Philips
TUV 16T5 4P-SE 16 Watt
1
T5
Model
C
E800901P
Philips
1
T5
C
E800902P
Philips
TUV 36T5 HO4P-SE 75 Watt
1
T5
C
3903567
Philips
TUV 64T5 4P-SE 75 Watt (1,60m)
1
T5
C
B280006
Philips
T5 Smart Cap lamp 40 Watt
1
T5 Smart Cap
D
B280005
Philips
T5 Smart Cap lamp 75 Watt
1
T5 Smart Cap
D
E800904
Philips
TUV lamp 130 Watt Amalgam
1
T6
E
E801409
Philips
TUV 335W XPT HO SE Amalgam (Replacement lamp WEDECO)
1
-
-
E800901L
LightTech
1
T5
C
E800902L
LightTech
TUV 36T5 HO4P-SE 75 Watt
1
T5
C
F980005
LightTech
TUV lamp 130 Watt Amalgam
1
T6
E
4800070AM
LightTech
T5 lamp 40 Watt Amalgam
1
T6
E
4800082AM
LightTech
T5 lamp 80 Watt Amalgam
1
T6
E
3903073
Xclear
Xclear T5 lamp 40 Watt
25
T5
C
3903074
Xclear
Xclear T5 lamp 75 Watt
25
T5
C
Model
UNIT SPECIFIC LAMPS
Art. Nr.
Brand
Box
Type
F980068
LightTech
Unit specific T5 lamps
T5 lamp 40 Watt, length 365mm (short)
1
T5
F
F980002
LightTech
T5 lamp 40 Watt Tech VG special base (B01)
1
T5
F
F980004
LightTech
T5 lamp 75 Watt Tech VG special base (B01)
1
T5
F
F980078BU
LightTech
T5 lamp 40 Watt for Tech UV-C/Flex
1
T5
G
F980079BU
LightTech
T5 lamp 75 Watt for Tech UV-C/Flex
1
T5
G
4800033
LightTech
T5 lamp Ozone Low/High pressure 75 Watt
1
T5
H
3903025
LightTech
Lamp 325 Watt Amalgam
1
T6
E
F980065
LightTech
Lamp 16 Watt Blue Lagoon Tech UV-C
1
T5
G
B280002
LightTech
Lamp 40 Watt Blue Lagoon UV-C Ionizer
1
T5
K
B280001
LightTech
Lamp 75 Watt Blue Lagoon UV-C Ionizer
1
T5
K
F980080
Xclear
Replacement lamp EA-3/4H-10 length: 53 cm, 56 Watt
50
T5
C
F980082
Xclear
Replacement lamp EA-3/4H-20 length: 84,5 cm, 90 Watt
50
T5
C
F980084
Xclear
Replacement lamp EA-4H-40 length: 102 cm, 110 Watt
60
T5
C
F980086
Xclear
Replacement lamp EA-3H-5 length: 35 cm, 35 Watt
50
T5
C
F980088
Xclear
Replacement lamp UV10 length: 33 cm, 30 Watt
50
T5
C
F980090
Xclear
50
T5
C
F980092
Xclear
50
T5
C
F980094
Xclear
60
T5
C
ADVERTORIAL
Pure pleasure
Swimming pools and spas are the perfect places
for sports, fun and relaxing. Unfortunately they
are also the perfect breeding place for bacteria,
viruses and other primitive organisms. Clean
swimming pool water doesn’t have to mean high
doses of chlorine. With UV treatment the chlorine
level can be kept as low as possible, decreasing
the unpleasant side effects of it. So you can fully
enjoy every swim.
The clear choice
Our UV-C lamps significantly reduce the required
concentration of chemicals needed to keep the pool clean.
So there’s no red eyes or skin irritations to worry about.
Also unpleasantly intense chlorine aromas that affect hair
and skin are avoided, making UV-C treated pools the
preferred choice with swimmers.
Pure innovation
With a long and reliable lifetime, low energy and maintenance
costs and high end of life output, Philips UV-C lamps provide
To find out more dive into our website at
www.philips.com/uvpurification
up to 12,000 hours of clean pool water. And with very low
levels of mercury, they’re clearly better for the environment
when they’re disposed of.
You’re safe with us
Philips has been lighting your world for more than 100 years.
Our comprehensive range of UV-C solutions covers water,
air and surface disinfection using low and medium pressure
mercury lamps.
POND FILTERS AND ACCESSORIES
Where pond filtration is linked to the "water flow" of the pond, Xclear offers
pond filters that are a suitable solution for every pond imaginable. Effective,
smart and safe: Xclear has the right pond filter type in its product range.
BANK FILTER
With three layers of filter material, integrated in
one compact filter, the Xclear Bank filter is very
effective and suitable for small ponds.
OPERATION
The water enters the filter through the universal hose coupling
via the spraying pipe at the top. The filter contains three layers of
filter material. The first layer consists of a filter mat, which traps
the larger pieces of polluting material. Then the water passes
through a mix of substrate, lava and zeolites. The porosity of
the substrate and the lava makes for an excellent development
of biological activity in the filter. The zeolites absorb harmful
substances such as ammonia (NH3) and reduce unpleasant
smells. Subsequently, the water flows through the bio blocks.
Thanks to the special design of these bio blocks, an
optimum bio culture is developed in the filter in a few
weeks' time. Including diffuser and algae magnet.
Item No.
Type
Size (h x Ø)
Max. flow
Pond volume
Inlet
Outlet
4053510
Bank filter 25 liter
32 x 34 cm
1500 L/h
5.000 L
25 mm
32 mm
4053515
50 x 34 cm
2500 L/h
7.500 L
25 mm
32 mm
4053520
50 x 41 cm
3500 L/h
10.000 L
25 mm
32 mm
BIOSTEPS
The Biosteps filter is a complete filter, ideal for ponds up to 4 m³.
The compact filter is equipped with a Philips 11 watt UV PL unit
with an integrated ballast, filter substrate and 3 types of Matala
matting for progressive filtration from large to smaller waste
particles. Fitted with a bottom drain with 40mm slide valve.
BENEFITS
•Filtration and disinfection all in one compact unit,
assuring excellent purification and a clear pond.
•Provides mechanical and biological filtration.
•Open structure prevents blockage.
•Easy to clean because of 40mm slide valve bottom drain.
•Inlet: hose tail 25/32/40mm.
•Outlet 40mm.
Item No.
Type
Size (l x w x h)
Max. flow
Pond volume
Inlet
Outlet
Waste Outlet
4053720
Biosteps + UV-C 11 Watt
55 x 36 x 45 cm
4.000 L/h
10.000 L
25-32-40 mm
40 mm
50 mm
3 CHAMBER FILTERS WITH
AND WITHOUT UV-C
The Xclear 3 Chamber Filter is a complete filter, suitable
for ponds up to 20m³ (220L) or 30m³ (330L).
OPERATION
3 Chamber filter without UV
The 3-chamber filter is a pump fed biological- and mechanical
filter. The water passes through 3 filter chambers that are filled
with honey comb media for biological filtration and filter foam
for progressive filtration from large to smaller waste particles.
3 Chamber filter with UV
Water enters the filter trough an in-line 40 watt UV-C lamp
before passing the filter chambers. The UV-C radiation
ensures that floating bacteria, germs and algae have no
chance to develop. After UV-C disinfection, the water
passes through 3 filter chambers that are filled with honey
comb media for biological filtration and filter foam for
progressive filtration from large to smaller waste particles.
BENEFITS
• Fast results visible; a clear and healthy pond.
• Smart design.
• All-in-one chamber filter.
• Inlet and outlet on same side of the filter
for easy installation and cleaning.
• Fitted with a 50mm slide valve waste outlet for easy cleaning.
• Without UV-C versions: hose tail 32mm.
• With UV-C versions Inlet: hose tail 25/32/40mm.
• Outlet: 63mm tank connector.
• Including lid.
Item No.
Type
Size (l x w x h)
Max. Pond
Max. Flow
4056605N
3 Chamber filter (220 liter)
96 x 42 x 60 cm
20 m³
4 m³/h
4056604N
3 Chamber filter (220 liter) + 40 Watt UV-C
96 x 42 x 60 cm
20 m³
4 m³/h
4056607N
3 Chamber filter (330 liter)
96 x 67 x 68 cm
30 m³
6 m³/h
4056606N
3 Chamber filter (330 liter) + 40 Watt UV-C
96 x 67 x 68 cm
30 m³
6 m³/h
CONNECT CLEAR MODULAR
FILTER SYSTEMS
150L
Compose your own modular filter system that suits any size of
(koi) pond easily with the Connect Clear Modular Filter system.
SPECIFICATIONS
• Modules are easy to connect with Ø90mm pipe or
(without glue) with special connectors (optional).
• Every module includes Ø90mm tank connectors
and a Ø50mm waste outlet with slide valve.
• The Connect Clear 80 liter module includes
filter grid and 4 filter brushes.
• The Connect Clear 150 liter and the Connect
Clear Vortex do not include filter media.
BENEFITS
• Complete pond filter.
• Usage of different filter media for optimal filtration.
• Create your pond filter with the filter materials you prefer.
• High quality filter material and filter tanks.
• Smart design for easy maintenance.
Please note: You can build your own filter system that suits
any size of pond. See the chart below for several types of
filter media suitable for the modular filter systems.
80L
150L
ACCESSORIES
150L
150L
80L
Item No.
Type
Size (l x w x h) Max. flow Max. pond In- / Outlet
4053705
Connect Clear modular filter 150 liter
65 x 65 x 72 cm 8.000 L/h
4053700
Connect Clear modular filter 80 liter
45 x 60 x 70 cm 3.500 L/h
5.000 L
90 mm
50 mm Slide valve
4053709
Vortex filter for Connect Clear
70 x 72 x 75 cm 8.000 L/h
12.000 L
90 mm
50 mm Slide valve
4902507
Matala Mat set (6 Piece) for Connect Clear 80 liter
-
-
-
4902509
Japanese Filtermat cartridge for Connect Clear 80 liter
-
-
-
-
-
4902508
Layer matting set (4 Piece) for Connect Clear 80 liter
-
-
-
-
-
4902516
Matala Mat set 8 Piece fine for Connect Clear 150 liter
-
-
-
-
-
4902514
Matala Mat set 8 Piece medium for Connect Clear 150 liter
-
-
-
-
-
4902512
Matala Mat set 8 Piece coarse for Connect Clear 150 liter
-
-
-
-
-
4900717
Coupling System 90 mm
-
-
-
-
-
-
-
12.000 L
90 mm
Waste Outlet
50 mm Slide valve
UV-C
POND PURIFIERS
FILTERS AND ACCESSORIES
BIOSIEVE
The Biosieve is a unique and proven biological
filter system suited for koi ponds.
OPERATION
Biological filter with 2 plastic sieve screens and a unique
filter system. The water is led into the filter and spread
out over 2 plastic screens (A). Then the water falls down
and has to go through a foam filter system with filter pipes
inside (B). The clean water exits the filter by gravity through
the big 110mm outlet. Pump fed inlet through hose tail
25/32/40mm. 50mm Waste outlet with slide valve.
A
B
B
B
A
Item No.
Type
Size (l x w x h)
Max. flow
Pond volume
Inlet (mm)
Outlet
Waste Outlet
4058000
Biosieve
66 x 66 x 95 cm
8.000 L/h
20.000 L
25-32-40
110 mm
50 mm Slide valve
PROFI CLOVERLEAF FILTER
A
B
C
A
D
Type
4056623
Profi Cloverleaf filter
OPERATION
Module A: Water enters this 1st module through the Ø110mm inlet
and has to go up through a pipe system and a filter net structure.
Module B: Water goes up through black (coarse) Matala matting.
Module C: Water goes up through green (medium) Matala matting.
Module D: Water has to pass through the foam filter system with
filter pipes inside.
The water will rise and exits the filter through the Ø110mm outlet.
The modules are connected with 2 x Ø90mm Union fittings. Each
module has its own Ø50mm waste outlet with slide valve.
B
D
Item No.
The Profi Cloverleaf filter is a modular filter system made of 4
modules. Each module has its own filter media for very effective
water filtration.
C
BENEFITS
• Complete pond filter.
• Usage of different filter media for optimal filtration.
• High quality filter material and filter tanks.
• Smart design for easy maintenance.
• Including filter media and all necessary fittings.
• Suited for both gravity as pump fed use.
Size (l x w x h)
Max. flow
Pond volume
Inlet
Outlet
Waste Outlet
137 x 137 x 75 cm
12.000 L/h
30.000 L
110 mm
110 mm
4x50 mm Slide valves
SIEVE PUMP FED
The Pump Fed Sieve is a perfect pre-filter for (koi)ponds
to take out bigger waste particles before the water is
pumped into a biological filter, pump or UV-C purifier.
ALSO
AVAILABLE
IN PRIVATE
LABEL
OPERATION
Water is pumped into the sieve unit where all parts bigger than
0,3 mm (300 micron) will stay on the screen and the water will
fall through. The pump fed model must be installed above the
water level of the pond.
BENEFITS
• Very effective mechanical
filter based on a
professional stainless
steel sieve bend screen.
• Reliable pre-filter.
• The “main filter” is able
to do his work better.
• Low-maintenance.
• Colour: Dark
Grey Granite.
• Including fittings
and cover.
pump
Item No.
Type
4058001
Sieve Pump Fed
pump
Max. flow
Inlet
Outlet
Size
15 m3/h
25/32/40 mm
75 mm
49 x 32 x 55 cm
SIEVE GRAVITY FED
The Gravity Fed Sieve is a perfect pre-filter to take out
bigger waste particles before the water is pumped into a
biological filter (like a Beadfilter), pump or UV-C purifier.
OPERATION
The pre filter must be installed at water level (gravity fed).
The float system will automatically adjust the filter to work
with a pump flow up to 25.000 l/h. Cleaning the filter is very
easy; you can flush the waste with water from the screen
to the waste outlet. Including 300 micron stainless steel
sieve element. Inlet: 2 x 110mm. Waste outlet: 63mm. Pump
outlet 90/63mm (provided with 63mm suction pipe).
BENEFITS
• Made entirely of polyethylene.
• One-piece housing: extra sturdiness and austere appearance.
• The “main filter” is able to do its work better.
• Including heavy duty cover.
• Very effective mechanical filter based on a
professional stainless steel sieve bend screen.
• Low-maintenance.
• Colour: Dark Grey Granite.
ALSO
AVAILABLE
IN PRIVATE
LABEL
open
Pump
On
Item No.
Type
4058002
Sieve Gravity Fed
closed
Pump
Off
Size
Max. flow
67 x 36 x 101 cm
± 25 m3/h
BEADFILTERS
ALSO
AVAILABLE
IN PRIVATE
LABEL
Beadfilters are closed (pressure) vessels filters, filled with thousands of plastic beads.
Beadfilters are the most popular pond filters because they perform both mechanicaland biological filtration for professional (koi) ponds, varying from 10m³ to 100m³.
OPERATION
Beadfilters are closed (pressure) filters filled with thousands of small plastic beads. These
beads float and therefore provide a means of mechanical filtration. The bacteria growth
on the enormous surface of these beads provide the biological filtration. Xclear Beadfilters
are made of a strong quality Polyethylene. All models are supplied with: a bottom drain to
remove the sludge from the bottom, a 6-way valve, a transparent lid, beads and a blower.
BENEFITS
• Most compact pond filter on the market.
• Available in 5 sizes for ponds from 10m³ to 100m³.
• Fine mechanical and biological filtration in one.
• Very compact in size.
• Easy to install.
• Easy to maintain; Very easy to rinse, without dirtying your hands.
• Colour: Dark Grey Granite.
Item No.
Type
Size (Ø x h)
Max. flow
Max. pond size
Max. fish load
6-way valve
4053768
Beadfilter 400
40 x 68 cm
± 15 m3/h
10 m3
35 kilo
1½"
4053769
Beadfilter 500
50 x 75 cm
± 15 m3/h
20 m3
50 kilo
1½"
4053772
Beadfilter 600
60 x 85 cm
± 15 m /h
35 m
80 kilo
1½"
4053773
Beadfilter 750
75 x 113 cm
± 25 m3/h
60 m3
135 kilo
2"
4053774
Beadfilter 900
90 x 126 cm
± 25 m3/h
100 m3
200 kilo
2"
4053777
Beadfilter transparant lid
-
-
-
-
-
3
3
BEADFILTER BYPASS
Installing this bypass allows the use of more economical
(low pressure) pumps. Due to a very compact bypass
system, the multi-way valve is completely unused during
filtering as the water flows straight into the filter and also
leaves the filter in a straight line. This action results in at
least 30% less pressure loss (depending on the type of
pump). The bypass system is very easy to install on all
Xclear Beadfilter models, using the unions supplied.
Item No.
Type
4053775
Bypass 400-500-600
Ø 50 mm
4053776
Bypass 750-900
Ø 63 mm
Size
XCLEAR FLOW-MATIC AUTOMATIC
BACKWASH-SYSTEM FOR BEADFILTERS
The Xclear Flow-Matic is an automatic backwash-system, that matches any Beadfilter with side mount connections.
It replaces the traditional 6-way-valves and takes care of less pressure loss thanks to the unique flow design.
OPERATION
The Flow-Matic uses 4 automatic 3-way-valves and a touch-screen controller. The controller starts and stops the circulating
pump and the blower automatically and switches the automatic valves in the correct position for backwash, rinse and filtration.
The user can decide how often the Flow-Matic carries out a backwash procedure. In addition to the automatic backwash
function, the user can perform an extra (manual) backwash by using the function in the touch-screen controller. The duration of
backwash and rinse is determined by the user. The controller can be equipped with a special wire to control Blue Eco pumps.
This way, the user can control the RPM of the Blue Eco pump for Filtration and Backwash. This will give you the highest pump
efficiency by using a low pump speed during filtration and a higher pump speed for backwashing. Ø63mm connections.
BENEFITS
• Replaces the traditional 6-way-valve.
• Fits any Beadfilter with side mount connections.
• Reduces the pressure loss significantly.
• Less pressure loss compared to a traditional 6-way valve.
• Duration of rinse and backwash can be adjusted.
• Easy to install and maintain.
• Controlled by LCD Touch-Screen.
• On/Off-function for the circulating pump.
RINSE
WITH AIR
FILTER
Item No.
Type
4050002
Flow-Matic for beadfilter
Xclear Flow-Matic automatic backwash features:
- Timer controlled activation of backwash
- Controller with touch screen LCD
- Adjustable backwash
- Adjustable rinse
- On - off pump control
BACKWASH
RINSE
WITH WATER
Connection
63 mm
POND EQUIPMENT AND SUPPLIES
FISH TANK 600 LITER
Blue 600-litre pallet tank for storage or quarantine.
The tank can be ordered with 220-litre filter (filled with
honey-comb media) and 11 Watt PL UV unit. Including
16/20/25mm hose tail and 50mm slide valve.
Item No.
Type
4056587
Fish Tank 600 liter + plug
4056590
Fish tank 600 liter with 220 liter topfilter
4056591
Super Fish Tank 600 liter complete (incl. UV-C 11 Watt and 220 liter topfilter)
TOPFILTER
220 LITER
Can be used on all
standard 600 liter (pallet)
tanks. Colour: black.
FILTER MEDIA
BAGS
Special filter media
bags for filter media.
Item No.
Type
9202026
Filter media bag black
45 x 30 cm
Size
9202027
60 x 45 cm
9202028
85 x 50 cm
Item No.
Type
4902609
Filter media bag black with header
45 x 30 cm
4901019
Topfilter 220 liter incl. lid
4902608
Filter media bag black with header
60 x 45 cm
BIO BALLS
BIO BLOCKS
High quality Bio Balls with a unique shape for biological filtration
and a better water partition (trickle filters). High quality materials
for long life span. Various sizes, specially made for pond use.
Surface: ±5000 mm².
Useful bacteria growing on the huge surface area
provided by these filter elements, converts harmful toxic
fish wastes into relatively harmless by-products which
are then removed by the plants or water changes.
Size: Ø50 mm, height: 29 mm, Surface: 13.000 mm².
Ø 30 mm
Item No.
Type
4902613
Bio Blocks Bag
10 L (± 90 pcs.)
Content
25 L (± 225 pcs.)
Item No.
Type
Content
4902629
Bio Blocks Bag
4902021
Bio Balls Container
5 liter
4902010
Bio Blocks Bag
± 500 pcs.
4902611
Bio Balls Bag
10 liter
4902015
Bio Blocks Bag
± 2000 pcs.
4902017
Bio Balls 30 mm big bag
(± 72 000 pieces)
4902029
Bio Blocks Big Bag
± 16.000 pcs.
THREADED TANK CONNECTOR
Threaded tank connectors with rubber ring and nut.
Item No.
Type
Size
Box
7105510
Threaded Tank Connector
Ø 40 mm
100 pcs.
7105512
Ø 50 mm
100 pcs.
7105514
Ø 63 mm
100 pcs.
7105516
Ø 75 mm
100 pcs.
7105518
Ø 90 mm
100 pcs.
7105520
Ø 110 mm
48 pcs.
TANK CONNECTOR
Item No.
Type
7105459
7105469
Straight connector for PVC solvent pipes.
Including flange and screws.
Size
Box
Tank Connector
Ø 40 mm
108 pcs.
Tank Connector
Ø 50 mm
108 pcs.
7105479
Tank Connector
Ø 63 mm
75 pcs.
7105481
Tank Connector
Ø 75 mm
40 pcs.
7105489
Tank Connector
Ø 90 mm
30 pcs.
7105499
Tank Connector
Ø 110 mm
24 pcs.
7105555
Radial Tank Connector for a round surface
Ø 110 mm
24 pcs.
BOTTOM DRAIN AND
AERATED BOTTOM DRAIN
High quality Bottom drain 110 mm outlet. The aerated
Bottom drain 110 mm has a rubber membrane on
top. When an air pump is connected the air bubbles
will cause an optimal circulation in the water.
bottom drain wit aeration filter
25mm hose tail
Check valve
Air pump
Item No.
Type
5905010
Bottom Drain 110 mm
Ø 110 mm
Size
5905012
Aerated Bottom Drain
Ø 110 mm & 25 mm
SLIDE VALVE
Xclear slide valves are rectilinear valves which can be
used to temporarily block the admission of water flow
in a low pressure circuit. Mainly used for on / off waste
valves in filters, to separate your filter from the water
column or to shut off the water flow when required.
BENEFITS
• Unrestricted flow.
• Quick opening / closing.
• Simple and trouble-free operation.
• Solved cement socket ends.
Item No.
Type
Size
Box
7100017
Slide valve
Ø 40 mm
120 pcs.
7100019
Slide valve
Ø 50 mm
60 pcs.
7100022
Slide valve
Ø 63 mm
48 pcs.
7100025
Slide valve
Ø 75 mm
30 pcs.
7100023
Slide valve (Stainless Steel Blade)
Ø 90 mm
12 pcs.
7100024
Slide valve (Stainless Steel Blade)
Ø 110 mm
12 pcs.
7100026
Slide valve
Ø 160 mm
4 pcs.
DIRTY HARRY PRE-FILTER
The Dirty Harry pre-filter provides you an additional tool
to keep your pond clean. The Dirty Harry pre-filter ensures
that larger pollutants in the pond water, such as leaves,
small branches and larger algae particles are collected
before they are caught up in the pump or in the filter.
Ø 110mm
72cm
BENEFITS
• Prevention that larger particles will
clog up or overload the filter.
• Protects the lifespan of the pond pump.
• Transparent housing; easy to see when it needs cleaning.
Filter
Pump
UV-C
unit
Pre-filter
Ø 25/32/40/
50/63 mm
Item No.
Type
5053029
Dirty Harry
Max. flow
Max. pressure
Size
25m /h
2 bar
Ø110 mm x 720 mm
3
2- AND 3-WAY CYLINDER VALVE
High quality ABS cylinder valves, made in the
Netherlands. Moving parts are made of fiberglass
reinforced polymer. Separate couplings are available
to make a union. Max. working pressure: 3 bar.
Item No.
Type
Size
Box
4053731
2-way Cylinder Valve
2 inch
6 pcs.
4053733
Ø 63 mm
6 pcs.
4053732
2 inch
6 pcs.
4053734
Ø 63 mm
6 pcs.
4053736
3-piece coupling fitting
2 inch
6 pcs.
4053735
3-piece coupling fitting
Ø 63 mm
6 pcs.
AUTOMATIC 2- & 3-WAY
CYLINDER VALVE
The Xclear ABS automatic cylinder valves have a robust,
fibreglass reinforced, cylinder. Comes in different models for
various applications i.e. suction and pressure pipes, technical
filter rooms, valve sets, solar systems etc. Available in 24 volt
and 230 volt, 63 mm or 2” solvent connections, 2- or 3-way
and as solar- or non-solar version. Due to the simple design
and separate available service sets the valves are easy to
service on location. The separate available unions make the
valve easy to mount/dismount for service and maintenance.
• Speed: 0.4 rpm at 50 Hz.
• 230 VAC or 24 VAC 50 / 60 Hz.
• Max. working pressure: 3 bar.
Item No.
Type
B200033AUTO2
Automatic 2-way cylinder valve 24V
Size
B200032AUTO2
2 inch
B200033AUTO
Ø63 mm
B200032AUTO
2 inch
B200035AUTO2
Ø63 mm
B200034AUTO2
2 inch
Ø63 mm
Ø63 mm
B200035AUTO
B200034AUTO
B200035AUTO1
Automatic 3-way cylinder valve 230V Solar
Ø63 mm
B200034AUTO1
Automatic 3-way cylinder valve 230V Solar
2 inch
2 inch
MULTIPOWER ECO
(3,1m/75W)
l/h 8000
7000
6000
5000
4000
3000
(0,9m/14W)
2000
1000
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
The Multipower Eco has been developed specially for
transportation of large amounts of water at low pressure.
With this pump you now have the ability to control the power
consumption of your pump. The high capacity makes the
Multipower Eco ideal for filter systems or as a watercourse pump.
Item No.
6900627
Type
MP ECO 8.000
Consumption
14-75 W
• Control the power consumption, and thus the capacity.
• Heavily polluted water (solids up to 10mm) can be
displaced easily, thanks to its big impeller wings.
• Suited for both wet and dry installation (under water level).
• Multipower pump consumes 25% less
energy than a conventional pump.
• Display shows the actual energy consumption (wattage).
• Including hose tails 25/32/40mm and 40mm
solvent fittings for inlet/outlet.
Flow
3.000-8.000 L/h
Outlet (mm)
40-32-25
Max. Head
0,9-3,1 m
FLOATING FEEDING RING
ANTI-ICE DEVICE + VENTURI
Floating feeding ring for targeted feeding of fish.
Prevents the pond from completely freezing over.
Item No.
Type
5056066
Floating Feeding Ring
400
5056067
Floating Feeding Ring with leaflet
400
Item No.
Type
5056068
72
5054052
Anti-Ice device + Venturi in a box
5056070
13
5054054
Anti-Ice device in bag
Number
Connection
20 mm
-
POND SAFETY NET
The pond net keeps your pond free of leaves. This
prevents a rotting process which could form harmful
gases in your pond, and ensures the health of your fish.
We recommend to clean the net frequently. The pond net
can also be used to keep the heron out of your pond.
Item No.
Type
5053540
Pond safety net
3x4 m
5053542
Pond safety net
4x4 m
5053544
Pond safety net
5x4 m
5053546
Pond safety net
6x4 m
5902021
Nails for pond safety net, 100 pieces
POND DEFENCE
Item No. Type
Size
-
The Pond Defence system protects your pond and fish from
predators such as herons, cats and dogs. A wire stretched around
the pond gives unwanted visitors a mild electric shock by means
of the transformer. This harmless shock will startle the heron, cat
or dog, which will flee and not return a second time.
Connection
5056580 Electric Fence Pond Defence 100 m inclusive 10 brackets
220V
5056590 Electric Fence Pond Defence 500 m inclusive 50 brackets
220V
5056600 Set of 10 brackets for Electric Fence „Pond Defence“
ECO SWITCH
Item No.
Type
5056576
Eco Switch
-
The Eco Switch is the ideal tool for switching two electrical
devices for your pond, such as two pond pumps. This is a good
alternative to a variable speed pump. The same energy-saving
result can be obtained by controlling two different pumps (max.
400W) with the Eco Switch. A pond pump is usually switched on
24 hours a day in order to circulate the pond water through the
filter. It is possible to save a lot of energy by switching from a
heavy to a light pump at set times during the day and/or night.
But the Eco Switch can, of course, also be used for other devices.
Connection
220V
UV-C PURIFIERS
POND
EQUIPMENT AND SUPPLIES
POND DISPENSE
The Pond Dispense is the ideal peristaltic pump for
dosing a liquid solution into the pipe system of your
pond. The neoprene hose makes it possible to add
various types of solutions to the water of your pond.
BENEFITS
• A dosage of up to 60 ml an hour is possible.
• Change the dosage easily by operating the
push button underneath the display.
• Easy to install due to the compact design and
the supplied suction and injection nipples.
• Installation is possible in combination with an (existing)
UV-C system. The dosing pump can operate after the
UV-C in the filter or in the pond, to ensure that the
dosed product is not broken down by the UV-C.
1: injection nipples with 3/8” male threaded 2: clamp saddle
for easy installation 3: suction nipple in liquid (e.g. bacteria)
4: socket nipple 1” male thr. x 3/8” fem. thr.
Item No.
Type
5056594
Pond Dispense
PROFI-HEATER
Dosage
Max. Dosage
0,5 ml/sec
120 sec/h
The Xclear Profi-Heater is a professional
stainless steel pond heater.
To raise the temperature of 1 m³ water in 1 hour by 1°C
needs about 1.000 kcal. This formula is only an indication,
as the temperature also depends on surface area and
any insulation that may be present. All models have been
fitted with an adjustable thermostat that can be regulated
up to 40°C. The heating element with the temperature
probe, as well as the inside of the casing are made of highquality stainless steel. Profi-Heaters can be connected
using pond tubing or PVC tubing. Including fittings.
Item No.
Type
Consumption
Max. Flow
6900455
Profi-Heater 1 kW (860 kcal/h)
1000 Watt
20.000 L/h
5.000 L
6900456
2000 Watt
20.000 L/h
10.000 L
6900457
3000 Watt
20.000 L/h
15.000 L
ANTI ALGAE COPPER
ELECTROLYZER
Item No.
Type
3300029
Copper Electrolyzer
Pond size
An ideal en effective method against (blanket)weed. The
Copper Electrolyzer is installed before the pond return inlet.
The pond water flows through the Copper Electrolyzer unit. A
copper unit, or Electrolyzer, is positioned within the housing,
and the copper unit discharges a minimal amount of copper
ions into the water flowing through the housing. These copper
ions (Cu2+) in the water have a positive charge and attach to
and destroy the cell walls of algae, bacteria, viruses and other
primitive organisms. As the cell wall is thereby damaged, these
organisms are no longer able to take up any nutrients, and are
therefore unable to multiply. The process of applying a positive
charge to copper is called copper electrolysis. Inlet/outlet: Ø50
mm. PLEASE NOTE: (too much) copper is harmful for fish!
Size
Max. Dosage
50 mm
0,7 ppm
SMS ALERT
SMS
ALERT
Item No.
Type
5056601
SMS Alert
The SMS-Alert is a mobile phone module with back-up
batteries that sends text messages after power failure or
flow switch activation. Failure of circulation pumps can have
disastrous consequences for fish farms and ponds. The
flow switch (included) will be activated when the water flow
stops. The delay time before sending a text message can
be adjusted set (standard delay is 1 minute, maximum delay
is 16 minutes) so no text messages will be send during filter
backwash when the pump is temporarily off. Extra connection
available for an optional level switch that warns for too low
or high water level. Delivered without a level switch.
SMS
ALERT
BENEFITS
• SMS Alert with flow switch.
• Works through SIM card.
• Worldwide use.
• Easy to access with cell phone.
• Recognizes commands of 5 different cell phones.
• Automatic message when batteries needs replacement.
• Programmable settings.
1. LED indicator lamp
2. On/Off switch
3. Flow Switch
4. Transformer 230V - 12V
5. 63mm male/female fitting for flow switch
FLOW SWITCH
Connection
12V
This stand-alone flow switch will switch an
external relay when there is too little flow.
• The flow switch has 2 x 63mm solvent connections, one
is Ø63mm outside, the other one Ø63mm inside.
• Max. switching power is 80V/A.
• Minimum flow for switching on: 3.000 l/h.
• At less than 1.100 l/h it switches off.
Item No.
Type
3903797
Flow switch with cable connector and adapter 63/63
E801220
Flow switch with cable connector
B290020
Universal adapter for Flow Switch
STATIC MIXER
Using the Static Mixer results in a proper distribution of
oxygen in your water with low hydrostatic pressure.
OPERATION
The water is together with air divided in the static mixer, resulting
in optimal mixing. The water and air passes through the stainless
steel vanes and the air (possibly in combination with ozone)
is quickly and efficiently mixed through the water. Due to the
relatively low pressure loss, energy-efficient pump can be used.
BENEFITS
• Connects to your existing filter- or plumbing system easily.
• Including air inlet.
• Also possible to use the mixer in a low-pressure
system, using an energy-saving pump.
Item No.
Type
4800016
Static Mixer Ø 75 mm
Size
75 mm
XCLEAR FISH FEEDER
The Xclear Fish Feeder is, due to its 3-button controller,
very easy to program and operate. Using the Xclear
automatic fish feeder will get the most out of your fish by
always giving them the correct amount of food. This results
in optimal growth and a more beautiful colour pattern
for fish, such as koi. Also suitable for fish farms, control
several feeders simultaneously by external automation.
OPERATION
• Very easy 3-button operation and programming.
• Set the quantity of food by setting the required number of
dispensing seconds per feeding from 0 to 600 seconds.
• Easy-to-set automatic feeding times.
• Food container for 7 liters of food.
• Electric cord 9 meters long.
• Can feed from 1 to 24 times a day.
BENEFITS
• No unnecessary pollution of the water.
• The filter is less likely to become clogged.
• Healthier for your fish.
• Suitable for pellet sizes between 2 and 9 mm.
• Labour-saving.
• External automation possible for one or more feeders.
• Including installation bracket.
• Made in the Netherlands.
Item No.
Type
6051800N
Automatic Fish Feeder
FISH FOOD
ALSO
AVAILABLE
IN PRIVATE
LABEL
Connection
Box
220V
4
BENEFITS STURGEON FOOD:
• Food slowly soluble in water.
• No negative impact on water quality.
• Already used over 10 years in professional sturgeon farms.
• Stimulates optimal growth of sturgeon.
BENEFITS FRESH WATER SHRIMPS AND SILK WORMS:
• Complements the daily feeding of your fish perfectly.
• Rich for nutrients.
• Use it as a delicacy, not as main fish food.
Our fish food comes with standard labels. Would you like to sell
your own brand? VGE BV offers the possibility to have your own
fish food with special colour containers and label, starting from
relatively low quantities.
Item No.
2053024
Type
Sturgeon food
Content
4,5 mm / 3 L container
Box
6
2803005
2803006
Freshwater shrimp
5 L container
12
Freshwater shrimp, red
5 L container
2804001
12
Silk worms
3 L container
24
WATER TREATMENT
Pond Support water treatment products
Pond Support offers a complete range of water treatment products and bacterial pond products. Pond Support
provides effective solutions to common pond problems in order to bring balance in your pond. The products
ensure healthy water conditions resulting in beautiful pond plants and healthy fish. The successful range of Pond
Support products is also available for private labeling. Please contact our sales department for details.
POND SUPPORT MAËRL
Maërl is extremely suitable for the construction of new ponds and
promotes a healthy
environment in existing
ponds. It raises the
hardness level of the
water and stimulates the
development of
microorganisms that
provide a good
biological balance in
your pond. 1 litre for
± 13m³ pond water.
ALSO
AVAILABLE
IN PRIVATE
LABEL
POND SUPPORT GH+
Increases the total
hardness (proportion of
dissolved calcium and
magnesium salts). 1 litre
for ± 6m³ pond water.
Item No.
Type
Volume
Box
Item No.
Type
Volume
Box
4902301
GH+
1 liter (± 1 kg)
12
4902309
Maërl
1 liter (±900 g)
12
4902262
GH+
2½ liter (±2½ kg)
30
4902216
Maërl
10 liter (± 9 kg)
36
4902200
GH+
10 liter (± 10 kg)
36
Volume
Box
POND SUPPORT PH-
POND
SUPPORT
KH+
pH- lowers the pH value of your pond water.
1 litre for ± 20m³ pond water.
Increases the carbonate
hardness of your pond
water.
1 litre for ± 6m³
pond water.
Item No.
Type
Item No.
Type
Volume
Box
4902303
KH+
1 liter (±1 kg)
12
4902306
PH-
1 liter (±1500 g)
12
4902215
KH+
10 liter (± 10kg)
36
POND SUPPORT OXYPOWER
POND SUPPORT ALGAE REMOVER
(not available in Germany)
Increases the oxygen content of pond water and helps fish
develop greater
resistance against
ammonia and nitrite. It
also accelerates the
biodegradation of dead
organic material on the
bottom of your pond
and reduces the volume
of harmful gases.
1 litre for ± 20m³ pond
water.
Quickly removes excessive algae from your pond and prevents
new growth. 1 litre for ± 40m³ pond water.
Item No.
Type
Volume
Box
Item No.
Type
Volume
Box
4902304
Oxypower
1 liter (±1200 g)
12
4902308
Algae remover
1 liter (±800 g)
12
4902263
Oxypower
2½ liter (±3 kg)
30
4902264
Algae remover
2½ liter (±2 kg)
30
4902214
Oxypower
10 liter (±12 kg)
36
4902207
Algae remover
10 liter (±8 kg)
36
WATER TREATMENT
The successful range of Pond Support products
is also available for private labeling. Please
contact our sales department for details.
ALSO
AVAILABLE
IN PRIVATE
LABEL
POND SUPPORT
POND MAINTENANCE
BACTERIA
Type
4902310
Pond maintenance bacteria
Type
Anti sludge bacteria
Type
4902366
Bacto Dry
Volume
Box
Item No.
Type
1 liter
12
4902311
Nitrifying bacteria
Volume
Box
1 liter (± 900 g)
12
Volume
Box
1 liter
12
POND SUPPORT
POND SALT
Removes algae and sludge in a natural, biological
manner. Sludge is a breeding ground for
pathogenic bacteria. 1 litre for ± 20m³ pond water.
4902305
Item No.
Nitrifying bacteria are needed to start up and
maintain the biological processes that provide a
natural balance. 1 litre for ± 20m³ pond water.
POND SUPPORT
ANTI SLUDGE BACTERIA
Item No.
A very strong, highly concentrated bacteria
formula, which consists of many useful strains of
bacteria. Improves the quality of water and helps
to start up filters. 1 litre for ± 20m³ pond water.
POND SUPPORT
NITRIFYING BACTERIA
Bacteria clean the water by natural processes.
Furthermore the bacteria activate the biological
balance, thereby eliminating ammonia and nitrites.
1 litre for ± 20m³ pond water.
Item No.
POND SUPPORT
BACTO DRY
Enhances various biological processes. It prevents
strong fluctuations in the pH value, it rules out high
levels of ammonium poisoning and nitrite
poisoning it also reduces stress in your fish and it
prevents parasites. 1 litre for ± 20m³ pond water.
Volume
Box
Item No.
Type
1 liter
12
4902302
Pond Salt
Volume
Box
1 liter (±1200 g)
12
POND SALT
ACTIVATED CARBON
It may be necessary or
even advisable to use
salt in your pond. Koi are
actually freshwater fish, but
will be very happy in a 1%
solution of salt, which also
helps to combat some of
the parasites. Salt is also
used as a disinfectant.
Absorbs odors and harmful
chemicals and dyes. It
prevents the growth of
algae and water problems.
Makes the water clear.
Item No. Type
4902616
Pond Salt
Content
Pallet
Item No.
Type
10 L
75 bags
4902615
Activated Carbon
Content
Pallet
10 L
75 bags
POND SUPPORT LACTIC
ACID BACTERIA
ALSO
AVAILABLE
IN PRIVATE
LABEL
100% biological product. The formula includes lactic acid
bacteria, enzymes and yeasts. For healthy koi in a balanced
pond. To be used in the following situations: When starting up
a new pond; immediately after the water has been changed;
when introducing new koi; when several parties of koi are
brought together; in the case of overpopulation of the pond;
after the use of medication; in the case of overfeeding; as
a booster for the immune system, in the case of excessive
algae and in the case of excessive levels of ammonia, nitrite
or nitrate. Also to be used at the beginning of a new pond
season, in the summer when temperatures are high, and after
preparing the pond and the filter system for the winter.
Item No.
Type
Content
Box
4902370
Lactic Acid Bacteria
1L
12
4902371
5L
4
4902372
25 L
1
POND SUPPORT BACTO GEL
ALSO
AVAILABLE
IN PRIVATE
LABEL
Item No.
Type
4902360
4902361
Bacto Gel is comprised of living bacteria especially developed
for the start-up and maintenance of biological filtration through
a nitrification effect, rendering harmful substances safe.
Bacto Gel is developed especially for filter systems, the gel
formulation allows bacteria to adhere to the filtration media
more effectively. Bacto Gel bacteria shortens the start-up time
of a filter system. A process usually requiring 6-8 weeks may be
shortened to 2-4 weeks. Bacto Gel bacteria are 100% natural,
they do not contain any chemicals and are free of pathogens.
Content
Box
Bacto Gel 1L
1L
12
Bacto Gel 5L
5L
4
POND SUPPORT BACTO LIQUID
ALSO
AVAILABLE
IN PRIVATE
LABEL
Bacto Liquid is a concentrated high-quality mix of specially
selected, natural bacteria which can be added to the pond
water, to achieve ideal Biotope conditions. These bacteria are
perfect for maintaining a pond. Bacto Liquid activates the natural
process of the biological decomposition of organic pollution
and thus takes care of an ideal balance in the pond and makes
the water clear. Regular doses of this formula will maintain the
number of beneficial bacteria for a stable water quality and
improved clarity. 1 litre is enough for 20.000 litre pond water.
Item No.
Type
Content
Box
4902364
Bacto Liquid 1L
1L
12
4902365
Bacto Liquid 5L
5L
4
DELIVERY CONDITIONS
VGE International B.V., domiciled at Ekkersrijt 7408 in Son, the Netherlands
General conditions of supply and payment
GENERAL TERMS AND CONDITIONS OF SALE VGE International B.V.
1.Orders
1.1VGE International B.V. (“VGE International”) is allowed to accept and reject orders of Buyer
at its sole discretion. An agreement will be deemed to have been concluded after VGE
International has confirmed an order placed by the Buyer, or has commenced the
execution of that order.
1.2 All offers of VGE International are valid for a maximum of 30 calendar days.
1.3In the event that an agreement is concluded by e-mail, an agreement may be concluded
without VGE International having to fulfill any conditions provided by law pertaining to
electronic communication and/or electronic conclusion of agreements.
1.4The Buyer will be entitled to cancel an order only after receiving written consent from VGE
International, which consent may be made subject to conditions as deemed appropriate
by VGE International.
2.Delivery
2.1Unless otherwise agreed in writing, the goods will be delivered Ex Works, Incoterms 2010
or, if any, a more recent version of the Incoterms. The Buyer will be obliged to take delivery
of the goods upon VGE International’s request.
2.2Any delivery times quoted or agreed on by VGE International may not be considered to be
firm deadlines, unless explicitly agreed otherwise in writing between the parties. In the
event of late delivery, VGE International must be declared to be in default in writing, in
which connection VGE International will be granted a reasonable term of at least 14
calendar days as of the date of the receipt of notification to fulfill its obligations. In the
event that such extended term is exceeded, the Buyer will be entitled to dissolve the
agreement or part of the agreement only with respect to the goods not delivered. In such
an event, VGE International will not be liable to pay damages, unless such damages are the
consequence of gross negligence or willful misconduct of VGE International’s executive
management.
2.3VGE International is entitled to deliver and invoice the goods in installments, unless the
goods in question do not have any stand-alone value in VGE International’s opinion.
2.4If at the request of Buyer VGE International holds a specified stock of goods that the Buyer
can order on demand, the Buyer will order such goods within 6 months from the date of
the Buyer’s request to keep such goods in stock. If the Buyer fails to do so, he will
nevertheless be liable to pay the purchase price. Unless agreed otherwise the delivery
time for goods that are available on demand is 15 working days from the day of the order.
2.5The Buyer is obliged to accept delivery of the goods upon VGE International’s request. If
Buyer fails to accept delivery, the Buyer will be liable for all costs and damages resulting
therefrom, including but not limited to the costs of storing and re-delivering the goods.
2.6VGE International will be entitled to charge the costs of any packaging separately. The
packaging will not be taken back. Should VGE International, however, be obliged by law or
any regulations to take packaging back, any costs related to taking back or processing
packaging will be borne by the Buyer.
3. Price and Payment
3.1Unless explicitly agreed otherwise in writing, all prices are quoted exclusive of VAT,
transport and insurance costs and all other costs. A quoted or agreed price is valid for one
order only, unless the parties have explicitly agreed otherwise in writing.
3.2VGE International will be entitled to adjust prices agreed upon before delivery in the event
of increases in cost-determining factors such as fluctuations in exchange rates, raw
materials, labor costs or in the event of government measures, provided that such
increases or measures occurred after the conclusion of the agreement but before delivery.
3.3Unless explicitly agreed otherwise in writing, the Buyer will pay the entire purchase price in
advance upon placement of an order, in euros and by transfer to or deposit into an account
indicated by VGE International, without any deduction, discount or set-off. Submission of a
complaint will not suspend the Buyer’s obligation to pay.
3.4If the Buyer fails to timely make a payment in accordance with article 3.3, the Buyer will be
in default and all claims of VGE International will become fully due and payable
immediately, without prejudice to any other rights that VGE International may have by
under these terms and conditions or the law.
3.5If at any time Van Erp has doubts as to the Buyer’s creditworthiness, Van Erp will have the
right, before commencing or continuing its obligations, to require the Buyer to provide
adequate security in the amount of the sums which are or will be owed to Van Erp by the
Buyer, whether or not immediately payable, under the agreement, all at Van Erp’s
discretion.
3.6In the event of untimely payment, VGE International will be entitled to compensation of all
extra-judicial costs, including but not limited to costs involved in sending reminders, one
or more notices of default or demand notices, which extra-judicial costs will amount to at
least 15% of the total amount payable, subject to a minimum of EUR 500, without prejudice
to any other rights that VGE International may have by virtue of these terms and conditions
or the law.
3.7In the event that VGE International is fully or largely successful in legal proceedings against
the Buyer, the Buyer will be obliged to compensate all costs incurred by VGE International
in connection with such proceedings, even to the extent that such costs exceed the cost
award made by the court. VGE International may invoke this clause irrespective of whether
the Buyer has appealed against the relevant judgment at the court of appeal or the
Supreme Court.
4. Retention of title
4.1VGE International will retain title to all goods delivered and to be delivered to the Buyer
until full payment of all purchase amounts has been received, as well as any amounts owed
by the Buyer pertaining to work performed by VGE International in connection with such
purchase agreements and any claims pursuant to any failure in the performance of such
agreements on the part of the Buyer.
4.2The Buyer will be obliged to store the goods delivered under retention of title with due
care, ensuring that they are recognizable as the property of VGE International. In addition,
it will be obliged to insure such goods against, inter alia, fire and water damage and theft.
The Buyer will pledge to VGE International any claims it has pursuant to such insurance
policies upon VGE International’s first request, as additional security with respect to VGE
International’s claims against the Buyer.
4.3In the event that the Buyer fails in the performance of any obligation vis-à-vis VGE
International, or in the event that VGE International has good reason to fear that the Buyer
will fail in the performance of its obligations, VGE International will be entitled to recover
the goods delivered under retention of title or to have such recovered, even when the
goods have to be detached. The Buyer will cooperate accordingly. The Buyer will bear the
costs of recovery, without prejudice to VGE International’s right to further damages.
5. Characteristics of Goods
5.1The goods will comply with any specifications explicitly agreed upon in writing and be free
from defects in material and workmanship under normal use consistent with VGE
International’s instructions for a period of 12 months from delivery to the Buyer.
5.2Any and all images and specifications of goods in catalogues, price lists, advertisements,
etc. and any samples of the goods must be deemed to be representations by
approximation only, unless VGE International has explicitly indicated the contrary in
writing with regard to a specific delivery.
5.3If the goods are intended to be used in a country outside the Netherlands, VGE
International is not responsible to ensure that the goods comply within any laws and other
requirements applicable in such other country, unless the parties have (i) explicitly agreed
otherwise in writing and (ii) the Buyer has correctly informed VGE International on the
exact content of such requirements.
5.4VGE International is at all times entitled to effect adjustments in the goods to be delivered,
in order to improve them or comply with government regulations.
5.5VGE International has no obligation and Buyer shall have no rights in relation to any
characteristics and/or performance of the goods other than the characteristics and the
performance that are applicable or agreed pursuant to this article 5.
6. Complaints and Inspection
6.1The goods delivered must be checked by or for the Buyer upon delivery with respect to
numbers and visible defects and any shortages or visible defects must be reported to VGE
International within 3 working days after delivery. The Buyer must report defects not
visible upon delivery within 3 working days of their discovery, though in any event within 3
working days after the time that the Buyer should reasonably have discovered them.
6.2The Buyer will be obliged to perform the inspection or to have the inspection performed
with due care, upon receipt of the goods. The Buyer will bear the risk for inspecting the
goods by means of random checks and may not rely on the fact that it did not observe a
defect that was visible and could have been discovered upon delivery because it—or a
third party engaged by it—did not inspect the entire shipment.
6.3In the event that a good does not comply with article 5 of these conditions, VGE
International will only be obliged—to be decided at the VGE International’s
discretion— to repair the defect, to replace the relevant good or to credit or refund the
amount charged in connection with the defective good in whole or in part, according to its
own reasonable judgment and to the exclusion of any other rights of the Buyer by law.
6.4The Buyer will not be entitled to any claim if the non-compliance with article 5 cannot be
attributed to VGE International, e.g. results from any transport, incorrect operation,
installation, storage or maintenance by the Buyer or a third party.
6.5Any and all claims for payment of an amount of money and/or repair of the relevant good
and/or replacement of the good and/or supply of any missing part, on whatever basis, as
well as any right to dissolve the agreement will lapse at the earliest of the following times:
a) upon late reporting pursuant to article 6.1 or b) 12 months after the delivery date.
7.Liability
7.1Without prejudice to article 2.2, any liability on the part of VGE International on the basis
of an attributable failure with respect an agreement concluded with the Buyer will be
restricted to the provisions laid down in article 6.3.
7.2VGE International will assume no liability with respect to damage as a consequence of or
related to any errors or omissions in advice rendered by it, nor will it assume any liability
with respect to damage as a consequence of or related to errors or omissions in the
processing instructions recommended by it.
7.3Without prejudice to article 7.1, VGE International will not—irrespective of the legal basis
of the Buyer’s claim—be liable for any consequential damages, including but not limited to
losses due to delays or loss of data, lost profits and penalties forfeited by the Buyer.
7.4The above-mentioned restrictions with respect to liability will not apply in the event that
the damage is the consequence of gross negligence or willful misconduct on the part of
VGE International’s executive management.
7.5The Buyer will indemnify VGE International against any damage resulting from claims by
third parties in connection with goods supplied by VGE International.
8. Force majeure
8.1If VGE International fails in the performance of its obligations due to an event of force
majeure, it will not be liable. To the extent that the circumstance making performance
impossible is not of a permanent nature, VGE International’s obligations will be suspended.
In the event that the period during which performance is not possible due to force majeure
exceeds 2 months or is expected exceed 2 months , both parties will be entitled to cancel
the agreement, without any obligation to pay the damages that may arise as a result.
8.2In the event that VGE International has already partially fulfilled its obligations upon the
occurrence of the situation of force majeure, or is only able to fulfill its obligations in part,
it will be entitled to separately invoice the part already supplied or the part that can still be
supplied and the Buyer will be obliged to pay that invoice as if it pertained to a separate
agreement.
8.3A situation of force majeure affecting VGE International within the meaning of this article
will be deemed to have occurred in the event of, inter alia, strikes, a shortage of raw
materials, delay, transport problems, war or threat of war, full or partial mobilization, riots,
sabotage, floods, fire or other forms of destruction within VGE International’s company,
lockouts and industrial actions, breakdowns of machines or tools or other breakdowns
within VGE International’s company. A situation of force majeure must also be deemed to
have occurred on the part of VGE International in the event that one or more of the
above-mentioned circumstances occurs within the companies of VGE International’s
suppliers and as a consequence VGE International cannot or could not perform its
obligations, or cannot or could not perform such in good time.
9. Suspension and dissolution
Without prejudice to VGE International’s rights under these terms and conditions or under
the law, VGE International will at any event be entitled to suspend (further) performance or
to dissolve any agreement concluded with the Buyer, in whole or in part, if (i) any goods
made available by VGE International to the Buyer become subject to attachment, (ii) the
Buyer is granted a suspension of payments or is declared bankrupt, (iii) any permits or
licenses required for the performance of the agreement are withdrawn, (iv) the Buyer fails
to fulfill one or more of its obligations ensuing from any agreement with VGE International,
(v) VGE International has sound reasons to believe that the Buyer is or will be unable to
fulfill its obligations under any agreement, or (vi) the Buyer ceases its business or if a
change occurs in the control of that business. Any right of the Buyer to suspend
performance is hereby excluded.
10. Applicable law and dispute resolution
10.1T hese terms and conditions and all quotations from and agreements with VGE
International will be governed by Dutch law. The UN Convention on Contracts for the
International Sale of Goods (“CISG”) does not apply.
10.2In the event that the Buyer is domiciled in a Member State of the European Union or in
Norway, Switzerland or Iceland at the time that proceedings are commenced, any and all
disputes relating to these terms and conditions and/or any quotations or agreements to
which these terms and conditions are applicable will exclusively be settled by the
competent court in Amsterdam, the Netherlands. The above will not affect VGE
International’s right to submit a dispute to the court that would be competent in the
absence of this provision.
In the event that the Buyer is not domiciled in a Member State of the European Union or in
Norway, Switzerland or Iceland upon the commencement of proceedings, any and all
disputes relating to these terms and conditions and/or any quotations or agreements to
which these terms and conditions are applicable will exclusively be settled in accordance
with the rules of the Netherlands Arbitration Institute [Nederlands Arbitrage Instituut, or
NAI]. Arbitration will take place in Amsterdam, the Netherlands. The case will be
submitted to three arbitrators and the arbitration proceedings will be conducted in Dutch.
SPARE PARTS
ECONOMY UV-C
MULTIMAX UV-C
E
F
G
A
H
B
C
I
I
E
H
D
B
G
A
C
Item No.
Type
Item No.
Type
XE01052
Economy UV-C 5 Watt
XE02052
MultiMax UV-C 5 Watt / 2500 liters
XE01092
Economy UV-C 9 Watt
XE02092
XE01112
Economy UV-C 11 Watt
XE02112
3903006
PL-S Bulb 5 Watt Economy Xclear
A
7100543
Universal adaptor 1" 25 x 20 x 15 mm clear
B
3903011
A
3902040
Sealing ring 1"
C
3903021
A
3903645
Housing MultiMax UV-C 5 Watt stainless-steel
D
3902041
O-ring 56 x 3 mm UV-C
B
3903646
D
3101112
Quartz sleeve 146 x 40 mm 5 Watt
C
3903647
D
3101113
C
3903515
Electrics MultiMax pond 5/9/11 Watt
E
3101114
C
3903005
Philips PL-S Bulb 5 Watt
F
7100543
Universal adaptor 1" 25 x 20 x 15 mm clear
E
3903010
F
Electrics Economy UV-C 5/9/11 Watt
G
3903020
F
3903571
Housing Economy UV-C 5 Watt
H
QG037
H
3903572
H
QG036
H
3903573
H
QG038
H
3902040
Sealing ring 1"
I
3902041
I
7300057
Nut for flat adaptor black for TL/Multimax
G
EP011001
Part
Part
SPARE PARTS
ULTRAFLEX UV-C
PROFESSIONAL UV-C
N
A
K
G
B
L
C
M
E
G F
D
F I
E
I
D
H
P
O
H
K
Item No.
Type
Item No.
Type
XE03182
Part
XH01182
XE03362
XH01362
XE03752
Ultraflex UV-C 75 Watt T5
XH01552
E800940
3-Way connection 63 mm black
I
3903030
Philips PL bulb 18 Watt
A
3903034
PL-L Bulb 18 Watt Economy Xclear
K
3903040
Philips PL bulb 36 Watt
A
3903045
PL-L Bulb 36 Watt Economy Xclear
K
3903050
Philips PL UVC bulb 55 Watt
A
F980079BU
T5 lamp 75 Watt for Tech/Flex UV-C
K
3902041
B
QG008
M
QG008
Quartz sleeve 280x44 mm 18 Watt
C
QG009
M
QG009
C
QG017
Quartz sleeve 695 x 25 mm 40/75 Watt
M
QG022
C
EP036001
Electrics Ultraflex UV-C 18/36 Watt
N
E800940
3-way connection 63 mm black
D
EP075017
Electrics Ultraflex UV-C 75 Watt
N
7300053
Universal adaptor 1½" 40 x 32 x 25 mm clear
E
3902041
L
F990115
Reduction piece 1,5" wire x 63 out 50 in
F
E800941
O-ring for 3-way connection 63 mm
P
EP036001
Electrics 18 / 36 Watt Professional
G
3903751
Housing Ultraflex UV-C 18/36 Watt
H
EP055001
Electrics 55 Watt Professional
G
3903752
Housing Ultraflex UV-C 75 Watt
H
3903673
Housing 18 Watt Professional UV-C
H
F990115
F
3903674
H
E801128
Universal adaptor 1½" 40x32x25mm clear
E
3903675
H
3902046
Sealing ring 1½"
G
3902046
Sealing ring 1½"
I
E800941
J
End cap black
K
E990011BU
Part
TL+ UV-C
TL KOI TIMER UV-C
J
J
B
B
A
C
A
D
G
H
I
C
E
F
K M
I
G
Item No.
Type
XH02102
XH02152
XH02252
XH02302
XH02552
3903559
3903560
3903561
3903564
3903562
3220000
3902557
3902558
3902559
3903551
4800028
3903532
3903527
3903665
3903666
3903667
3902040
3902024
7300054
7300057
TL+ UV-C 5.000 / 10 Watt
TL+ UV-C 10.000 / 15 Watt
TL+ UV-C 20.000 / 25 Watt
TL+ UV-C 30.000 / 30 Watt
TL+ UV-C 55.000 / 55 Watt
Philips TL Bulb 10 Watt
Replacement kit O-ring TL UV-C
Quartz sleeve TL UV-C 10 Watt
Quartz sleeve TL UV-C 15/25 Watt
Quartz sleeve TL UV-C 30/55W/Ozone
Electrics TL+ UV-C 10 Watt
Electrics TL+ 15/25 Watt
Housing TL+ UV-C 10 Watt
Housing TL+ UV-C 15/25 Watt
Housing TL+ UV-C 30/55 Watt
Sealing ring 1"
Grip for TL UV-C
Universal adaptor 30 x 25 x 20 mm transparent
Nut for universal adaptor black for TL+ / Multimax
Part
A
A
A
A
A
B
C
C
C
G
G
G
G
H
H
H
I
J
K
M
Item No.
Type
3100813
TL Koi Timer UV-C stainless steel 30 Watt
Part
3100814
TL Koi Timer UV-C stainless steel 55 Watt
3903564
A
3903562
A
3220000
B
3902559
Quartz sleeve TL 30/55W/Ozone UV-C
C
E800940
D
F990115
E
E800941
F
3903677
Housing for TL Timer UV-C 30/55 Watt
G
4800071
Electrics for TL Timer UV-C stainless steel 30 Watt
I
4800072
Electrics for TL Timer UV-C stainless steel 55 Watt
I
3902024
Grip for TL UV-C
J
SPARE PARTS
FLEX UV-C
TECH UV-C
L
L
K
K
P
P
M
N
J F
M
I
N
J F
I
G
G
O
H
H
O
R
Q
Q
Item No.
Type
XE04402
Flex UV-C 40 Watt
Item No.
Type
XE04752
Flex UV-C 75 Watt
XE05402
Tech UV-C 40 Watt
K
XE05752
Tech UV-C 75 Watt
K
E800940
I
L
F990115
F
F980078BU Lighttech T5 bulb red base 40 Watt
F980079BU Lighttech T5 bulb red base 75 Watt
EP040012
Electrics UV-C 40 Watt
Part
Part
L
F980078BU Light Tech T5 bulb red base 40 Watt
K
QG017
Quartz sleeve 695 x 25 mm 40/75W
M
F980079BU Light Tech T5 bulb red base 75 Watt
K
3902041
P
EP040012
E800941
G
EP075017
L
H
QG017
Quartz sleeve 695 x 25 mm 40/75W
M
EP075017
F990175BU Housing Flex UV-C 40/75 Watt
L
F990115
F
3902041
P
3902046
Sealing ring 1½"
J
E800941
G
E801128
N
E800940
I
3902046
Sealing ring 1½"
J
F990196BU Closing lid Flex UV-C
R
E801128
N
E990011BU End cap black
Q
F990165BU Housing Tech UV-C 40/75 Watt
H
Q
MARINE UV-C
JUMBO TECH UV-C
L
A
G
K
B
C
D
P
E
M
N
J F
F
I
U
F
G
H
O
I
Item No.
Type
XH10402
Marine UV-C 40 Watt
XH10752
Marine UV-C 75 Watt
Item No.
Type
E800940
I
XH04402
B280006
Philips T5 Smart cap lamp 40 Watt
K
XH04752
B280005
Philips T5 Smart cap lamp 75 Watt
K
F980002
Lighttech T5 bulb orange base 40 Watt
A
EP040023
Electrics Marine UV-C 40 Watt
L
F980004
Lighttech T5 bulb orange base 75 Watt
A
EP075021
Electrics Marine UV-C 75 Watt
L
3902041
B
QG020
Quartz sleeve 933 x 28,5 mm 40/75 Watt
M
QG015
C
3902041
P
E800940
D
E800941
G
F990115
E
H
E800941
F
B910002MA Housing Marine UV-C 40/75 Watt
Part
Part
F990071
Earthing cable
-
EP040001
Electrics Tech UV-C 40 Watt
G
F990115
F
EP075001
Electrics Tech UV-C 75 Watt
G
3902046
Sealing ring 1½"
J
3903788
Housing Jumbo Tech UV-C 40/75 Watt
H
E801128
Universal adaptor 1½" 40 x 32 x 25 mm
N
I
SPARE PARTS
130 WATT AMALGAM UV-C
WITH FLOW SWITCH
PROFESSIONAL UV-C Ø110 MM
55 W
A
G
75 W
130 W
J
G
B
B
A
D
C
A
C
C
D
E
G
H
F
H
P
H
I
I
J
Item No.
Type
XH06132
130 Watt Amalgam UV-C stainless steel with flow switch
Part
Item No.
Type
XH07552
Professional UV-C Ø 110 TL 55 Watt
E800940
D
XH07752
Professional UV-C Ø 110 T5 75 Watt
E800904
Philips TUV Bulb 130 Watt Amalgam
A
XH07132
Professional UV-C Ø 110 Amalgam 130 Watt
G
3903562
EP130001 Electrics 130 Watt Amalgam UV-C with flow switch
Part
A
QG012
C
E8800902P
Philips TUV 36T5 HO4P-SE 75 Watt
A
E800912
O-ring for quartz sleeve Jumbo UV-C
B
E800904
Philips TUV Bulb 130 Watt Amalgam
A
E800941
F
3220000
B
F990115
3902559
Quartz sleeve TL UV-C 30/55 Watt/Ozone
C
QG015
C
QG012
C
Electrics TL+ UV-C /Koi stainless steel 55 Watt
G
Electrics Jumbo UV-C 75 Watt
Electrics 130 Watt Amalgam UV-C + flow
switch
Housing Professional UV-C Ø110 55 Watt TL
G
H
3902024
Housing Professional UV-C Ø110 75 Watt T5
Housing Professional UV-C Ø110 130 Watt
Amalgam
Grip for TL UV-C
3902041
O-Ring 56 x 3 mm UV-C
D
F990107
End cap with lamp retainer 32 mm
I
3903668
Housing for Amalgam UV-C 130 Watt
E
H
E801220
Flow Switch
P
B290020
Reduction piece 63/63 for flow switch
I
3903527
F990107
End cap amalgam black
J
EP075002
EP130001
3903589
3903671
3903672
G
H
H
J
IMMERSION UV-C
IN-LINE UV-C
C
M
G
E
H
I
J
H
D
Item No.
Type
Item No.
Type
XP01402
Immersion UV-C 40 Watt
XE06752
Xclear In-Line UV-C 75 Watt
XP01752
Immersion UV-C 75 Watt
F980079BU
XP01402.1
Immersion UV-C 40 Watt Amalgam
XP01802
Immersion UV-C 80 Watt Amalgam
Part
Part
T5 bulb red base 75 Watt
K
EP075017
N
3902041
P
F980078BU
C
QG017
M
F980079BU
C
E801128
Universal adaptor 1½" 40 x 32 x 25 mm
I
4800070AM
T5 bulb 40 Watt Amalgam
C
3902046
Sealing ring 1½"
J
4800082AM
C
3100831
Housing Xclear In-Line UV-C 75 Watt
H
D
3100847
T5 bulb 80 Watt Amalgam
Quartz sleeve immersion 40/75 Watt & 80 Watt
Amalgam
Quartz sleeve immersion 40 Watt amalgam
3100835
Electrics Immersion UV-C 40 Watt
E
3100836
Electrics Immersion UV-C 75 Watt
E
3100842
Electrics Immersion UV-C 40/80 Watt Amalgam
E
3100837
D
SPARE PARTS
OZON REDOX TURBO3 LP UV-C
K
U
V
N
M
A
B
C
OZON REDOX TURBO3 HP UV-C
O
A
B
C
B
O
E
Q
S
D F
D
E
G
F
M
H
0,5
0
1,0
bar
N
I
G
L
L
J
S
P
T
I
1,5
K
Item No.
Type
XH08752
Ozone Redox Turbo3 low pressure UV-C
J
T
P
K
R
Part
Item No.
Type
XH09752
Ozone Redox Turbo3 high pressure UV-C
Part
4800033
Ozone bulb Low/High pressure 75 Watt
A
4800027
Housing for Ozone Redox
H
3902106
B
QG025
Quartz sleeve 886 x 31 mm 75 Watt ozone
C
QG025
C
3902106
B
E800940
D
4800033
Ozone bulb Low/High pressure 75 Watt
A
F990115
E
E800941
F
4800068
Venturi unit for Ozone high pressure UV-C
I
EPOL001 Electrics Ozone Redox Turbo3 low UV-C 75 Watt
G
4800015
Check valve Viton (Ozone resistant)
K
EPOH001 Electrics Ozone Redox Turbo3 high UV-C 75 Watt
G
4800027
Housing for Ozone Redox
H
4800009
Hose 8 mm black for Ozone UV-C
L
4800022
Static mixer for Ozone low pressure
I
4800005
Air plug rectangular for Ozone UV-C
O
4800015
Check valve Viton (Ozone resistant)
K
E800940
D
4800009
Hose 8 mm black for Ozone UV-C
L
E800941
F
4800006
Y-screw connection 8x1/4''
M
3902095
O-ring Viton 60 x 3 mm Viton R
T
E
6900529
Air-Pump for Ozone low pressure
N
F990115
4800005
Air plug rectangular for Ozone UV-C
O
4800116
Handgripp complete for Ozone
J
4800076
End cap for Ozone with 1 air plug
P
4800076
End cap for Ozone with 1 air plug
P
4800084
End cap for Ozone with 2 air plugs
Q
4800057
Manometer for Ozone high pressure
M
3901045
Nut 70 mm x 33.5 mm for Ozone BLACK
S
4800065
Venturi 3/4" for Ozone high pressure
N
3902106
O-ring for quartz sleeve UV-C
B
3902095
O-ring Viton 60 x 3 mm Viton R
T
E801128
U
3902046
Sealing Ring 1½"
V
PRO UV-C
PRO BUSTER UV-C
A
J
A
Q
C
C
B
B
P
L
G
J
K
H
L
R
I
H
I
Item No.
Type
XP02752
Pro UV-C 75 Watt T5
Part
XP02132
Pro UV-C 130 Watt Amalgam
B212009
Housing for Pro Buster UV-C
H
3903649
Housing for Pro UV-C 75 / 130 Watt
H
3101185
Quartz sleeve Pro UV-C
C
3101185
Quartz sleeve Pro UV-C
C
E800904
Philips TUV lamp 130 Watt Amalgam
A
E800902P Philips TUV 36T5 HO4P-SE 75 Watt
A
3902070
O-ring 28 x 4 mm
Q
E800904
Philips TUV lamp 130 Watt Amalgam
A
3902107
O-ring NBR 32 x 2 mm
3902070
O-ring 28 x 4 mm
J
3902107
O-ring NBR 32 x 2 mm
B
3903794
Electrics Pro UV-C 75 Watt Xclear
G
3903795
Electrics Pro UV-C Amalgam Xclear
Reduction piece 63/63 3/4" wire for flow switch
Amalgam
Reduction piece 60,5/60,5 3/4" wire for flow switch
Amalgam
Flow switch complete
G
B290020
B290021
E801220
Item No.
Type
Part
XP0631302 Pro Buster UV-C 3 x 130 Watt Amalgam
I
B
EPPBXC00 Electrics part Pro Buster Xclear complete
Reduction piece 63/63 3/4" wire for flow switch
B290020
Amalgam
Reduction piece 60,5/60,5 3/4" wire for flow
B290021
switch Amalgam
E801220 Flow switch complete
J,K,L
I
I
P
I
A
L
E
E
Item No.
Type
Xclear Flow-Matic
3-Way Connection Flow-Matic 63mm
B290096
(2 pieces)
B200035AUTO4 Replacement Valve
Eccentric Connection Flow-Matic (includB290097
ing nut)
B290098
Seal Service Set Flow-Matic (4 Valves)
Part
B
4050002
B290090
Touch Screen Control Unit
A
B
C
F
C
E
F
VGE International B.V.
Ekkersrijt 7408
5692 HK Son
The Netherlands
Tel. +31(0) 499 461 099
Fax +31(0) 499 494 229
[email protected]
www.vgebv.com
www.xclear.nl

PRODUCT CATALOGUE - VGE International B.V.

Transcription

Similar documents

Big on Help! Big on Savings!

SRX725

KF-650 - Bostonproaudio.com

UrbanTimes ARCHIVES

Viagra Light Switch Snopes. Fast delivery.

Publicatie Vijver Corten staal Eng2 2014

Watt`s Happening! - Watt Public School

PhoneSoap Brochure

PRODUCT - Coast Spas

P4400 KAW spec sheet V4b