docour latest brochure (pdf 11mb)
download 
Report Transcription
our latest brochure (pdf 11mb)
KNOTTY PINE CEILING Size: 13mm x 63mm x 0.9 - 3.0m APPLICATION: • Ceiling • Cladding • Partitioning • Wendy houses • Dog Kennels • Saunas • Lapas 20 PCS BNDL CORNICE 10 PCS BNDL Size: 13mm x 68mm x 1.8 - 3.0m APPLICATION: • Finishing off against ceilings and walls FLOORING 5 PCS BNDL Size: 22mm x 102mm x 3.0 - 6.6m APPLICATION: • Flooring • Cladding Walls • Lapas • Wendy Houses • Lofts SKIRTING 10 PCS BNDL Size: 13mm x 64mm x 1.8 - 3.0m APPLICATION: • Finishing off over any flooring types I.C.S, Pine Hardwood, Laminated, Flooring, Tiles and Carpets PINE WEATHER BOARD 10 PCS BNDL Size: 22mm x 100mm x 1.8 - 4.8m APPLICATION: • Timber Homes • Lapas • Wendy Houses • Kennels PINE ½ LOG Size: 22mm x 100mm x 1.8 - 4.8m or 32mm x 100mm x 1.8 - 4.8m APPLICATION: • Timber Homes • Lapas • Wendy Houses • Kennels 5 PCS BNDL SALIGNA FLOORING 10 PCS BNDL Size: 22mm x 66mm x 2.1 - 3.0m or 22mm x 88mm x 2.1 - 3.0m APPLICATION: • Flooring • Cladding Walls • Lapas • Wendy Houses • Lofts SALIGNA DECKING 10 PCS BNDL Size: 22mm x 66mm x 2.1 - 3.0m or 22mm x 88mm x 2.1 - 3.0m APPLICATION: • Outdoor Decking Tel: +27 11 730 6903/4/5 Fax: +27 86 606 8854 E-mail: [email protected] Plot 60, Ermelo Road, Largo, Springs PO Box 10540, Strubenvale, 1570 PALLETS 2 Way Non-reversible 2 Way Reversible 2 Way Single Deck Baleboard 2 Way Single Deck Wing 2 Way Non-reversible Wing 4 Way Fully Reversible Export Bulk 4 Way Non-reversible 2 Way Fully Reversible Wing Perimeter Base Export Economy Standard and non-standard pallets and bale boards are manufactured to your specifications and are designed to handle most commodities. Pallets can be manufactured out of W.O.S (wet of saw) or K.D (kiln dried) timber from either pine or saligna. Two way entry Width Length Opening height Overall height Bearer Bottom slat Hand pallet truck openings Chamfers Leading slat Deck gap Top slat Four way entry Length Stringer board Opening height Overall height Bottom slat Width Block Hand pallet truck openings Tel: +27 11 730 6903/4/5 Fax: +27 86 606 8854 E-mail: [email protected] Plot 60, Ermelo Road, Largo, Springs PO Box 10540, Strubenvale, 1570 CRATES AND BOXES At PAGES TIMBER we design and manufacture crates and boxes to client specifications to suit any product commodity or application. Only the highest quality materials are used to manufacture the crates and boxes and they are available in light, medium and heavy duty timber to suit various applications. The PAGES TIMBER sales team are always available to assist in the design of customised crates and boxes. PAGES TIMBER’s crates and boxes conforms to international PhytoSanitary Standards as well as being approved by the Dept of Agriculture and carries the necessary approved certification when exporting. Lid slats Lid battons Side slats End slats Side battons Fillers Height Base slats Length Width End batton Bearer Tel: +27 11 730 6903/4/5 Fax: +27 86 606 8854 E-mail: [email protected] Plot 60, Ermelo Road, Largo, Springs PO Box 10540, Strubenvale, 1570 DOORS We manufacture a range of interior and exterior doors in Pine, Saligna and Meranti. Pine Open Back Pine B2B Saligna B2B Above also available as stable door. Country West Deep Moulded All doors 813mm x 2032mm. Tel: +27 11 730 6903/6904 Fax: +27 86 606 8854 E-mail: [email protected] Plot 60, Ermelo Road, Largo, Springs | PO Box 10540, Strubenvale, 1570 Above also available as stable door. Masonite
