P811B Manual

PCI Card
P811B
Manual
Model List :
1. P811B -4R : P811B board use four RTL 8100C 10/100 Mbit Lan chipset
for PCI 2.2 spec. PCI clock 33MHz/32bit
2. P811B -4G : P811B board use four RTL 8110SC 10/100/1000 Mbit Lan chipset for
PCI 2.2 spec. PCI clock 33MHz/32bit
Card Chipset list:
1. PCI bridge chipset : PERICOM PI7C8148A PCI Bridge 32bit/33MHz PCI bridge 160pin Tiny LFBGA
2. LAN chipset : RTL8100C or RTL8110SC LAN chip 128pin PQFP
P811B-4R
. Four ports on board Realtek RLT8100C 10T/100T base for server use.
. Compliant to PCI-2.2 use RLT8100C chip set
. Supports 10Mb/s and 100Mb/s Fast Ethernet
. Supports Wake On LAN (PME) function
. Supports Full Duplex Flow Control (IEEE 802.3x)
. Mini PCI 1 (support PCI spec 2.2 only), with can be alternatively used with the fourth LAN Port
. Option (Mini PCI 2 (support PCI spec 2.2 only), with can be alternatively used with
the third LAN Port)
. Four ports LAN LED pin header support
P811B-4G (Option)
. Four ports on board Realtek RLT8110SC 10T/100T/Giga base for server use.
. Compliant to PCI-2.2 use RLT8110SC chip set
. Supports 10Mb/s and 100Mb/s and Giga bit /s Fast Ethernet
. Supports Wake On LAN (PME) function
. Supports Full Duplex Flow Control (IEEE 802.3x)
. Supports IEEE 802.1P and 802.1Q for Qos use.
. Mini PCI 1 (support PCI spec 2.2 only), with can be alternatively used with the fourth LAN Port
. Option (Mini PCI 2 (support PCI spec 2.2 only), with can be alternatively used with
the third LAN Port)
. Four ports LAN LED pin header support
Placement
120mm
100mm
120mm
100mm
Jumper Setting
J2 J4
pin1
J1 J3
J1 Mini PCI 1
J2 LAN4
J3 Mini PCI 2
J4 LAN3
J1
Mini PCI 1
J2
LAN4
J3
Mini PCI 2
J4
LAN3
1-2
ENABLE
1-2
ENABLE
1-2
ENABLE
1-2
ENABLE
2-3
DISABLE
2-3
DISABLE
2-3
DISABLE
2-3
DISABLE
Note:
P811B PCI Card only support:
1. 4 LAN : 4 x RJ45 Connector only (No Mini PCI LAN Card)
2. 4 LAN : 3 x RJ45 Connector and 1 x Mini PCI LAN Card
3. 4 LAN : 2 x RJ45 Connector and 2 x Mini PCI LAN Card
Please don't connect: 4 x RJ45 connector + 1 x Mini PCI LAN Card.
4 x RJ45 connector + 2 x Mini PCI LAN Card.
LAN LED
+
LED4
LED3
LED2
LED1
LAN4 - LED
LAN3 - LED
LAN2 - LED
LAN1 - LED
Driver Install
Driver Install Supports WINDOWS 98/98SE/ME/NT4.0/2000/XP
Insert the CD into your CD-ROM driver and the install MENU should
appear as below.
1. Click Driver Install when Install MENU appears
2. Click NEXT to install REALTEK LAN Driver
3. Click Finish to complete Setup
NOTE: If you need to install the driver manually, refer to
the follwing CD-ROM divectory path: X:\Driver\Realtek\Setup.exe
Package list:
1. P811B board x 1
2. Easy manual x 1
3. Driver CD x 1