PDF Catalog - Chris Industries

Transcription

2810 Old Willow Rd
Northbrook, IL 60062
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
About Chris Industries:
Company Overview
Quoting & Ordering
Page 2
Page 2
Delivery Information
Maps to Our Locations
Page 2
Page 3
Sheets, Coils, & Bar Stock:
Bar Stock
Aluminum: Mill Finish & Anodized
Aluminum: Kynar Painted
Brass Sheets
Copper Coil & Sheet
Specialty Copper
Page 4
Page 4
Page 5
Page 5
Page 6
Page 7-8
Steel Sheets: Galvalume, Bonderized
Steel Sheets: Galvanized
Page 9
Page 9
PAC-Clad Sheets
UNA-Clad Sheets
Page 10
Page 11
Stainless Steel Sheets, Lead, TCS
Textured Metals/Liberty Collection
Page 12
Page 13
Gutters:
K-Style Gutter System
Half Round Gutters
Box Gutters
Custom Gutters
SMACNA Gutter Styles
Page 14-17
Page 18-19
Page 20
Page 21
Page 22
Downspouts:
Square Downspout & Elbows
Square Offsets
Square Overhangs & Radius Downspout
Round Downspout
Round Offsets
Page 23-24
Page 25
Page 26
Page 27-29
Page 30
Gutter & Downspout Accessories:
K-Style Gutter Hangers
Square Downspout Hangers
K-Style End Caps, Miters, and Outlets
Half Round Gutter Hangers
Round Downspout Hangers
Half Round End Caps, Miters, & Outlets
European Half-Round Gutter System
Page 31
Page 32
Page 33
Page 34-35
Page 36-37
Page 38
Page 39-42
Fasteners:
Copper & Stainless Nails, Rivets
Rivets, Screws, Paint, & Caulk/Sealants
Page 43
Pages 44-45
Soldering Equipment:
Solder, Sal-Ammoniac Bars, Brushes, Flux
Express Soldering Irons
Sievert Soldering Irons
Hand Soldering Irons
Gas Fired Soldering Pots
Page 46
Page 47
Page 48
Page 49
Page 49
Other Items:
Pipe Vents/Plumbing Vents
Gutter Screen
Wire and Rolled Screen
Ridge Vent & Ridge Roll
Downspout Strainers
Splash Guards
Copper Soffit
Chemical Finishes
Page 50
Page 50
Page 51
Page 51
Page 51
Page 51
Page 52
Page 52
Tools:
Pages 53-56
Roof Panel
Roof Panel Clips
Page 57-58
Page 58
Flashings:
Valley
ODE, Gutter Apron
Roof to Wall, Gravel Stop
Counter Flashing
Baby Tins, Shake Tins
Panel Starter
Page 59
Page 60
Page 60
Page 61
Page 62
Page 62
Roll-Forming Services
Page 63
Sheet Metal Fabrication:
Conductor/Leader Boxes
Finials/Spires
Dormers
Snow Guards
Galvanic Corrosion
Roof Valley Installation
CRT-61 Resale Form
Credit Application
Pages 65-81
Pages 82-98
Pages 99-101
Pages 102-103
Page 104
Page 105
Page 106
Page 107
1
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Company Overview:
In 1974, entrepreneur Creighton Helms spun off a division of his successful Chicagoland non-ferrous metal
service center, Christy Metals, to meet the increased demand for copper architectural sheet metal products.
This new company, Chris Industries; would service the roofing, sheet metal, HVAC, and general construction
industry around the greater Chicago area.
In the beginning, Chris carried only copper products, earning a reputation as Chicago’s one-stop copper shop.
Over time, Chris added materials such as aluminum, galvanized steel, Kynar material, stainless steel, and zinc
to its stock inventory. With the addition of these and other metals, Chris soon had a full line of architectural
sheet metal products to offer their customers.
As Chris grew, their customer base expanded to southern Illinois, Wisconsin, Indiana, and Iowa. In the late
80’s, Chris added a fabrication department to compliment its full service distribution efforts. The addition
allowed Chris to supply flashings in a quick, cost-effective manner. As the fabrication department grew, Chris
added state-of-the-art fabrication equipment to increase their service offerings.
In the Spring of 2001, Chris again expanded its efforts by opening a second location in Joliet, Illinois. This new
location has allowed Chris to conveniently serve the growing downstate communities and allow additional
space for the growing manufacturing and fabrication needs.
Today, Chris manufactures a variety of metal products for numerous industries across all 50 states, Canada,
and the Caribbean. It has become the leading supplier of architectural sheet metal goods and precision
fabricator of sheet metal products. For flat stock or custom fabrication, Chris is here to help!
Quoting and Ordering Information:
All Chris Industries quotations are subject to change without notice, subject to prior sale, and unless
otherwise noted, are for immediate acceptance. All sales are made subject to availability at time of order,
subject to strikes, accidents, or other causes beyond our control. Cancellations of special or fabrication
orders are not permitted without Chris Industries written consent. All copper, stainless steel, solder, and
zinc quotations are quoted “price-in-effect” and are valid until the start of the next business day.
Delivery Information:
Delivery is free in the following Illinois counties on orders of $2000 or more:
Cook
Kendall
DuPage
Lake
Grundy
Livingston
Kane
McHenry
Kankakee
Will
Lake, IN
Shipments under $2000 may have an additional delivery fee. Shipments outside these areas may be
delivered by Chris or common carrier.
2
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Northbrook, IL
Joliet,
Joliet,
IL IL
3
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Bar Stock:
Copper Bar
Alloy 110, 99% pure copper, HO4 Hard Temper, ASTM b187 and b152
Thickness"
3/32
1/8
1/8
Decimal"
0.0938
0.125
0.125
Width"
1
1
“x”
Length"
144
144
96
est. #/bar
4.5
6
-----
Length"
est. #/bar
144
5.1
Stock bar typically has squared
edges. Bar can also be created by
cutting 1/8” thick Sheet to a variety
of widths by 96” long. Rounds are
available via special order.
Stainless Steel Bar
Thickness"
1/8
Decimal"
0.125
Width"
1
Bar weight is estimated. Actual weight may vary
Other thicknesses and sizes available via special order
Sheet Metal- Aluminum:
Aluminum Mill Finish Flat Sheet
Mill Finish: Alloys 3003-h14 and/or 5005-h34, ASTM b209
Thickness"
0.032
0.040
0.050
0.063
0.080
0.125
Width"
48
48
48
48
48
48
Length"
120
120
120
120
120
120
lbs/sheet
19
23
29
36
46
72
Aluminum is easy to form and doesn’t rust; Instead,
it forms an oxide coating. Aluminum is light weight
and non- magnetic. Aluminum is an anode and
corrosion or pitting may occur if there is contact or
water run-off from most other metals. Use of
fasteners should be limited to aluminum or passive
stainless steel.
Other sizes available via special order
Aluminum Anodized Flat Sheet
Alloy 5005-h34 Medium Bronze, Dark Bronze, Clear, or Black. ASTM b209
Thickness"
0.032
0.040
0.050
0.063
0.080
0.125
Width"
48
48
48
48
48
48
Length"
120
120
120
120
120
120
sf/sheet
40
40
40
40
40
40
Anodizing is unique to aluminum and results in the
increase of corrosion resistance. Anodization only
affects the surface of the material. If fasteners will be
used that will penetrate the surface of the metal they
should be only aluminum or passive stainless.
4
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Aluminum: Kynar Painted Flat Sheet
Alloy 3105-h15 ASTM b209. See pages 6-7 for color selection
Thickness"
0.032
0.040
0.050
0.063
Width"
48
48
48
48
Length"
120
120
120
120
Prefinished aluminum sheets with Kynar®
500 or Hylar® 5000 coating. This product is
available from a variety of manufacturers, but
we stock: PAC-Clad made from 91% recycled
material and UNA-Clad made from 75-100%
recycled material. For color selection, see
pages 10-11.
sf/sheet
40
40
40
40
Other Lengths Available Via Special Order
Sheet Metal– Brass :
Alloy 260 ASTM b36
Temper:
Half Hard
Soft
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Thickness
0.0200
0.0250
0.0320
0.0400
0.0500
0.0625
0.0800
0.0937
0.1250
0.1875
0.2500
Sheet Size Sheet #*
36x96
21.5
36x96
26.5
36x96
34.0
36x96
43.0
36x96
53.0
36x96
66.5
36x96
86.0
36x96
100.0
36x96
133.0
36x96
199.5
36x96
266.0
* there may be a 2000 lb minimum for brass sheet.
5
Alloy 260 Yellow Brass is also known as
'Cartridge Brass.' This alloy is typically
the image that comes to mind when
referring to brass. It is used in a variety of
applications including kick plates, hand
rails, and faucets.
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sheet Metal- Copper
Copper Coil
Alloys 110 and/or 122; 99.9% pure copper. HOO, HO1, and HO32 tempers, ASTM b370
Ounce
Thickness"
16
16
16
16
16
16
16
20
20
20
20
20
20
20
0.0216
0.0216
0.0216
0.0216
0.0216
0.0216
0.0216
0.0270
0.0270
0.0270
0.0270
0.0270
0.0270
0.0270
Width" lbs./sf lf per lb.
11.875
13.125
13.750
15.000
18.000
20.000
24.000
11.875
13.125
13.750
15.000
18.000
20.000
24.000
1
1
1
1
1
1
1
1.25
1.25
1.25
1.25
1.25
1.25
1.25
lbs. per lf
1.011
0.914
0.873
0.800
0.667
0.600
0.500
0.808
0.731
0.698
0.640
0.533
0.480
0.400
0.990
1.094
1.146
1.250
1.500
1.667
2.000
1.237
1.367
1.432
1.563
1.875
2.083
2.500
Copper's thickness is measured
in ounces per square foot instead of gauge. Therefore,
16oz copper weighs 1 pound
per square foot.
There are a variety of "Specialty
Copper's" available in coil form
including Freedom gray® by
Revere Copper and KME's
TECU brands of Brass, Bronze,
Gold, Oxid, and Zinn.
Copper and Copper alloys are
corrosive to most other metals.
Do not allow copper to contact
other metals other than brass,
bronze, and passive stainless
steel alloys.
Other coil widths available via special order
Freedom gray coils available in 16oz x 20” or 24” wide
Not all tempers stocked
Copper Flat Sheet
Alloys 110 and/pr 122; 99.9% pure copper. O6O, HOO, HO1, and HO2 tempers. ASTM b370
Ounce
Thickness
sf/sheet
lbs/sf
lbs/sheet
12
12
0.0162
0.0162
36
36
96
120
24
30
0.75
0.75
18
23
16
16
0.0216
0.0216
24
24
96
120
16
20
1
1
16
20
16
16
16
0.0216
0.0216
0.0216
36
36
48
96
120
120
24
30
40
1
1
1
24
30
40
20
20
20
20
20
24
24
32
0.027
0.027
0.027
0.027
0.027
0.0323
0.0323
0.0431
24
24
36
36
48
36
36
36
96
120
96
120
120
96
120
96
16
20
24
30
40
24
30
24
1.25
1.25
1.25
1.25
1.25
1.5
1.5
2
20
25
30
38
50
36
45
48
32
0.0431
0.125
36
36
120
96
30
24
2
5.79
60
139
Plate
Width" Length"
6
Rome was the first to use copper for architecture. The main
dome of the Pantheon had a
copper roof that
remained in
service up to the beginning of
World War II.
Copper is easy to form, and is
often the least expensive metal
to use when considering its life
span compared to its’ cost.
“Gold is for the mistress,
Silver for the maid;
Copper is for the craftsman, cunning at his trade.”
-Rudyard Kipling
Other sizes and thicknesses available via
special order
*Soft Temper Copper also available in
sheets and rolls
Not all tempers stocked
*Sheet weight is estimated
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sheet Metal- Specialty Copper:
FreedomGray™- zinc/tin coated copper by Revere
Alloy 110. 99.5% pure copper. HOO 1/8 hard temper. ASTM b370
Ounce
16
20
Thickness
0.021
0.027
Width"
36
36
Length"
120
120
sf/sheet
30
30
FreedomGray™ sheets are coated on both sides
with a patented Z-T Alloy™. t offers the advantages
of copper in a naturally weathering earth tone gray
color. It is rugged, environmentally friendly & for use
in most architectural applications.
Coils also available
Continental Bronze™- pre-oxidized copper by Revere
Alloy 110. 99.5% pure copper. HOO 1/8 hard temper. ASTM b370
Ounce
16
20
Thickness
0.021
0.027
Width"
36
36
Length"
120
120
sf/sheet
30
30
Coils also available
“pre-aged” to a natural brown/bronze oxide finish. The
oxide is essentially the same as the one that forms on
plain, “red” copper within two to five years after it is
exposed to the local microenvironment. It is not a paint
or resin-based coating. The oxide is not a permanent
finish; rather, it is an advancement of natural weathering. As it is exposed to the elements, ContinentalBronze will continue to age and eventually assume a
mature, green patina.
The time required for this to occur cannot be predicted
as the process depends on local (micro) environmental
conditions and severity of exposure.
Sheet Metal-TECU Sheet Products
TECU® is the brand of quality copper and copper-alloy strip and sheet products manufactured for architectural roof and façade cladding
applications. TECU® products are manufactured by KME, the world’s leading copper mill company. The TECU® program includes surfaces (materials) and systems (roof cladding, façade cladding, and rainwater).
TECU® Brass
Alloy 230
mm
0.7
0.7
1.0
1.0
Thickness"
0.028
0.028
0.039
0.039
Width"
39.37
39.37
39.37
39.37
Length"
96
120
96
120
sf/sheet
26.25
32.81
26.26
32.81
TECU Brass is an alloy specifically designed
for use on facades. It offers outstanding
mechanical abrasion resistance, corrosion
resistance, and rigidity. It can be easily cold
shaped and soft soldered.
Width"
25.59
25.59
Length"
78.74
78.74
sf/sheet
13.99
13.99
TECU Bronze is very similar to copper in
appearance but has greatly increased corrosion
resistance as well as a much higher tensile
strength.
TECU® Bronze
Alloy 511
mm
0.7
1.0
Thickness"
0.028
0.039
7
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
TECU® Gold
mm
0.7
1.0
Thickness
0.028
0.039
Width"
25.59
25.59
Length"
78.74
78.74
sf/sheet
13.99
13.99
TECU Gold is a Copper & Aluminum alloy
with a Gold appearance. After initial matting,
the color changes to a soft golden tone.
TECU® Net
mm
0.7
1.0
0.7
1.0
Thickness
0.028
0.039
0.028
0.039
Width"
39.37
39.37
39.37
39.37
Length"
78.74
78.74
118.11
118.10
sf/sheet
21.53
21.53
32.29
32.30
In roofing applications, perforated mesh is
ideally suited for vented roof ridges. TECU®
Net is an ideal extension to the TECU®
system for simple applications such as vent
TECU® Patina
mm
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.7
Thickness Width"
Length"
sf/sheet
0.024
26.36
78.74
14.41
0.024
26.36
118.11
21.62
0.024
39.37
78.74
21.53
0.024
39.37
118.11
32.29
0.028
23.61
78.74
12.91
0.028
23.61
118.11
19.37
0.028
39.37
78.74
21.53
0.028
39.37
118.11
32.29
TECU® Patina copper sheets are patinated green on one side.
This process causes an oxidized layer to form on the surface
of the copper – a process similar to the natural patination that
occurs over time when it is exposed to atmospheric
conditions. The patina is extremely varied just as you would
expect from a natural surface. The different color tones and
shades gradually blend together.
TECU® Zinn
mm
0.7
Thickness
0.028
Width
26.375"
Length
120"
sf/sheet
22
Zinn is a tin coated copper sheet that weathers
to a dark gray color. It is very easy to solder!
CLEAR COATINGS FOR COPPER:
Despite the desirability of preserving the bright new penny appearance of copper, Revere Copper (and Chris Industries)
do not recommend clear coatings be applied to exterior copper work.
Compared to copper, the life expectancy of clear coatings is exceedingly short. Reasons for short coating life include,
but are not limited to: Weather conditions; underfilm corrosion; ultraviolet degradation;
Corrosive atmospheres; heat; abrasion. If a bright appearance is required for store fronts, column covers, or similar
accessible locations, a specialty metal-finishing firm should be retained prior to installation. Interior applications such
as fireplace trim, stove hoods, counter tops, moldings, and backsplashes may not be exposed to the elements above, however, the same cautionary notes should apply.
Surface preparation: It is critical that the copper be completely clean and free of all foreign substances,
oxides, etc. Residual lubricants and/or anti-stain compounds must be removed before the coating is applied.
8
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sheet Metal-Steel Products
Galvalume® Flat Sheet
Coated in 55% aluminum/43.5% zinc/1.5% silicon. ASTM a792
Gauge
18
20
22
24
26
Thickness"
0.0516
0.0396
0.0336
0.0276
0.0217
Width"
48
48
48
48
48
Length"
120
120
120
120
120
lbs/sf
2.0465
1.5569
1.3121
1.0674
0.8226
lbs/sheet
82.00
62.50
52.50
42.75
75.00
Offers excellent corrosion resistance.
Surface Spangle may vary.
This material cannot be soldered. Rivets
and sealants should be used for fastening.
Paintgrip / Bonderized Flat Sheet
g90 galvanized steel. LFQ (lock forming quality). ASTM a527
Gauge
Thickness"
Width"
Length"
lbs/sf
lbs/sheet
12
14
16
0.1084
0.0785
0.0635
48
48
48
120
120
120
4.531
3.281
2.656
181.24
131.24
106.24
18
20
0.0516
0.0396
48
48
120
120
2.156
1.656
86.24
66.24
22
24
26
0.0336
0.0276
0.0217
48
48
48
120
120
120
1.406
1.156
0.906
56.24
46.24
36.24
The surface has a full zinc
coating and is phosphate
treated for painting.
Galvanized Flat Sheet
g60 or g90; LFQ (lock forming quality), ASTM a653 gauges8-16, ASTM a653M gauges 18-26
Gauge
Thickness"
Width"
Length"
lbs/sf
lbs/sheet
8
10
11
12
14
16
18
20
22
24
24
24
24
26
26
26
26
0.1681
0.1382
0.1196
0.1084
0.0785
0.0635
0.0516
0.0396
0.0336
0.0276
0.0276
0.0276
0.0276
0.0217
0.0217
0.0217
0.0217
48
48
48
48
48
48
48
48
48
36
36
48
48
36
36
48
48
120
120
120
120
120
120
120
120
120
96
120
96
120
96
120
96
120
7.031
5.781
5.156
4.531
3.281
2.656
2.156
1.656
1.406
1.156
1.156
1.156
1.156
0.906
0.906
0.906
0.906
281.24
231.24
206.24
181.24
131.24
106.24
86.24
66.24
56.24
27.74
34.68
36.992
46.24
21.74
27.18
28.99
36.24
9
Galvanization is the process of zinc
coating steel sheet which has been
annealed after coating in order to
fuse the zinc to the base metal. This
results in a corrosion resistant coating that won’t flake or peel when
forming.
Use of fasteners should be limited
to stainless steel or galvanized
materials.
Galvanized sheet can be soldered
with the appropriate flux and
soldering equipment.
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sheet Metal-Painted Steel Sheet and Coil
Painted Steel & Aluminum : Kynar Painted Flat Sheet
PAC-Clad Color
24ga
22ga
0.032
0.040
0.050
Almond
√
√
√
√
√
Arcadia Green
√
√
Award Blue
√
√
Berkshire Blue
√
√
Bone White
√
Burgundy
√
Cardinal Red
Charcoal
√
√
√
Rivets
Paint
Caulk
√
√
√
√
√
custom
√
√
custom
√
√
custom
√
√
√
√
√
√
√
custom
√
√
√
√
√
custom
√
√
√
√
√
√
√
√
0.063
PAC-Clad
√
Cityscape
√
√
√
√
√
√
Colonial Red
√
√
√
√
√
√
√
Dark Bronze
√
√
√
√
√
√
√
Evergreen
√
√
√
√
Forest Green
√
√
√
√
√
Granite
√
√
Hartford Green
√
Hemlock Green
√
Hunter Green
√
Interstate Blue
√
Mansard Brown
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
custom
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Medium Bronze
√
√
√
√
Midnight Bronze
√
Military Blue
√
Musket Gray
√
Patina Green
√
Sandstone
√
√
Sierra Tan
√
√
Slate Blue
√
Slate Gray
√
Stone White
√
Teal
√
√
Terra Cotta
√
√
Aged Copper*
√
√
Champagne*
√
√
√
Copper Penny*
√
√
√
Silver*
√
√
√
Weathered Zinc*
√
√
Zinc*
√
√
Galvalume Plus*
√
√
√
√
√
√
Matte Black
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
custom
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
custom
√
√
√
custom
√
√
√
custom
√
√
√
custom
√
√
√
√
√
√
√
√
√
√
√
custom
√
√
√
custom
√
√
10
√
√
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sheet Metal-Painted Steel Sheet and Coil
Painted Steel: Kynar Painted Flat Sheet
UNA-Clad
ASTM a653
UNA-Clad Color
26ga
24ga
22ga
0.032
0.040
0.050
Almond
√
√
√
√
√
Award Blue
√
Bone White
√
√
Brandywine
√
√
Champagne*
√
√
√
√
√
√
√
√
0.063
√
√
Charcoal Gray
√
√
√
√
√
Cityscape
√
√
√
√
√
Classic Copper
√
√
√
Colonial Red
√
√
√
√
√
√
Dark Bronze
√
√
√
√
√
√
Dark Ivy
√
√
√
√
√
√
√
√
√
Rivets
Paint
Caulk
√
√
√
√
√
custom
√
√
√
√
√
custom
√
√
√
√
√
custom
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Electric Blue
√
Extra Dark Bronze
√
√
√
√
√
√
√
√
√
Hartford Green
√
√
√
√
√
√
√
√
√
Hemlock Green
√
√
√
√
√
√
√
√
√
Mansard Brown
√
√
√
√
√
√
√
√
√
Matte Black
√
√
√
√
√
√
√
√
√
custom
Medium Bronze
√
√
√
√
√
√
√
√
√
√
Patina Green
√
√
√
√
√
√
√
√
√
Regal Blue
√
√
√
√
√
√
√
√
√
Regal Red
√
√
√
√
√
√
√
√
√
Sandstone
√
√
√
√
√
√
√
√
√
Sherwood Green
√
√
√
√
√
√
√
√
√
Sierra Tan
√
√
√
√
√
√
√
√
custom
√
√
√
√
√
√
√
√
Silver*
√
Sky Blue
√
√
√
√
√
√
√
√
√
Slate Gray
√
√
√
√
√
√
√
√
√
Stone White
√
√
√
√
√
√
√
√
√
Teal
√
√
√
√
√
√
√
√
custom
Terra Cotta
√
√
√
√
√
√
√
√
custom
√
√
custom
Tropical Patina
Acrylume
√
√
√
√
√
√
√
√
√
11
√
√
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sheet Metal-Stainless Steel & Lead
Stainless Steel Flat Sheet
Alloy 304, Finish 2b, ASTM a240
Gauge
Thickness"
Width"
Length"
lbs/sf
lbs/sheet
14
0.0747
48
120
3.125
125
16
0.0598
48
120
2.500
100
18
19
20
22
24
0.0478
0.0418
0.0359
0.0299
0.2390
48
48
48
48
36
120
120
120
120
120
2.000
1.750
1.500
1.250
1.000
80
70
60
50
30
24
26
26
0.0239
0.0179
0.0179
48
36
48
120
120
120
1.000
0.750
0.750
40
23
30
Steel’s alloyed with more than 10%
chromium are considered stainless
steel. It is tarnish resistant, durable,
and stronger than steel. Alloy 304 is
usually the choice for architectural
work. Alloy 316 has better corrosion
resistance and is harder than alloy
304. Alloy 430 has higher iron content than either the 304 or 316 alloys. It is magnetic and will rust at a
slow rate in outside environments.
Other thicknesses and sizes available via special order
Other finishes available (#4 Brushed, #8 Polished, and more)
Alloys 316 and 430 available via special order
Terne-Coat Stainless Flat Sheet (TCS-II)
Alloy 304 stainless Sheet with a 50%/50% Zinc-Tin Coating ASTM 240
Gauge
Thickness"
Width"
Length"
24
26
0.0239
0.0179
36
36
120
120
Because of its extremely high corrosion resistance,
TCS II is recommended for use in severe industrial,
chemical or marine environments.
Lead Sheets & Rolls
Form
Sheet
Roll
Roll
Sheet
Roll
Roll
lbs/sf
2.5
2.5
2.5
4
4
4
Thickness"
0.0391
0.0391
0.0391
0.0625
0.0625
0.0625
Width"
36
36
36
36
36
36
Length"
36
120
240
36
120
240
avg. weight
23
75
150
36
120
240
12
Lead is corrosive to aluminum.
Lead is attacked by the lime which is
found in fresh concrete and will rapidly be
corroded by it.
Warning: Do not ingest lead. It is toxic.
Please request an MSDS sheet when you
order lead.
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Revere Liberty Collection™
Why Use Textured Copper?
• Greater rigidity
• Reduced maintenance costs
• Scratch and dent resistance
• Damage concealment
• Glare reduction; light diffusion
• Greater Skid-and-slip reduction
• Heat dissipation and insulation
• Minimal surface friction
• Acoustical improvement
• Improved adhesion ability
Many more patterns available*
Liberty Collection Textured copper is available in:
• 16oz and 20oz Copper
• 3x10 and 3x8 sheets
13
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
K-Style Gutter Systems
Copper:
Typically, copper gutter is 16oz and alloy 110 or 122. Other thicknesses of copper are available
as are ‘specialty’ coppers. In addition, a variety of profiles can be fabricated or reproductions can
be made.
”Specialty Coppers” (see pages 7-8) include Revere’s Freedom Gray and Continental Bronze;
and TECU’s Zinn in addition to several others.
Stainless Steel:
Stainless steel gutter are available via special order.
What is Kynar/Hylar?
Kynar is the registered trademark of Arkema. Also known as PVDF (Polyvinylideneneflouride),
it is a manufactured resin which has high dielectric strength as well as abrasion resistant characteristics. It was accidently discovered when DuPont was developing Teflon®. This coating is
applied via the paint which is applied to both the PAC-Clad and UNA-Clad (amongst others)
sheet and coil products that we then fabricate and roll form into a variety of gutter, downspout,
and other architectural details.
Kynar Steel and Aluminum is run in Peterson’s PAC-Clad or Firestone’s UNA-Clad. Other
manufacturers may be able to be run via special order. 26ga and 22 ga Kynar material may
be run when available.
Hi-Back K-Style Gutters
K-Style Hi-back Gutter Available from 0 to 90 degrees.
Gutter can be pitched from side to side for better drainage.
Standard Gutter Dimensions:
14
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
K-Style Gutter: Copper
Standard K-Style
High Back K-Style
Copper
4"
Profile
K-Style
Ounce
12oz
Material
Copper
4"
4"
4"
4"
Copper
5"
K-Style
K-Style
K-Style
K-Style
Profile
K-Style
16oz
20oz
16oz
20oz
Ounce
16oz
Copper
10'
Copper
10'
Specialty*
10'
Specialty*
10'
Material Lengths
Copper
any
5"
5"
K-Style
K-Style
20oz
16oz
5"
Copper
6"
6"
K-Style
Profile
20oz
Ounce
K-Style
K-Style
16oz
20oz
6"
6"
Copper
7"
7"
7"
7"
Copper
8"
8"
8"
8"
K-Style
K-Style
Profile
K-Style
K-Style
K-Style
K-Style
Profile
K-Style
K-Style
K-Style
K-Style
16oz
20oz
Ounce
16oz
20oz
16oz
20oz
Ounce
16oz
20oz
16oz
20oz
Copper
Specialty*
Lengths
10'
any
any
Specialty*
any
Material Lengths
Copper
Copper
any
any
Specialty*
any
Specialty*
any
Material Lengths
Copper
any
Copper
any
Specialty*
any
Specialty*
any
Material Lengths
Copper
10'
Copper
10'
Specialty*
10'
Specialty*
10'
Copper
4"
4"
4"
4"
4"
Copper
5"
5"
5"
5"
Copper
6"
6"
6"
6"
Copper
7"
7"
7"
7"
Copper
Profile
High Back
High Back
High Back
High Back
High Back
Profile
High Back
High Back
High Back
High Back
Profile
High Back
High Back
High Back
High Back
Profile
High Back
High Back
High Back
High Back
Ounce
12oz
16oz
20oz
16oz
20oz
Ounce
16oz
20oz
16oz
20oz
Ounce
16oz
20oz
16oz
20oz
Ounce
16oz
20oz
16oz
20oz
Material
Copper
Copper
Copper
Specialty*
Specialty*
Material
Copper
Copper
Specialty*
Specialty*
Material
Copper
Copper
Specialty*
Specialty*
Material
Copper
Copper
Specialty*
Specialty*
Lengths
10'
10'
10'
10'
10'
Lengths
10'
10'
10'
10'
Lengths
10'
10'
10'
10'
Lengths
10'
10'
10'
10'
Profile
Ounce
Material
Lengths
8"
High Back
16oz
Copper
10'
8"
8"
8"
High Back
High Back
High Back
20oz
16oz
20oz
Copper
Specialty*
Specialty*
10'
10'
10'
*Specialty Copper Includes:
• Continental Bronze®
• Freedom Gray®
• Zinn®
15
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
K-Style Gutter: Aluminum
Standard K-Style
Aluminum
Profile
High Back K-Style
Thickness"
Material
Lengths
Aluminum
Profile
Thickness"
Material
Lengths
5"
K-Style
0.027
Painted
10', 20'
5"
High Back
0.032
Painted
10', 20'
5"
K-Style
0.032
Painted
10', 20'
5"
High Back
0.032
Mill Finish
10', 20'
5"
K-Style
0.024
Mill Finish
10', 20'
5"
High Back
0.032
Kynar
5"
K-Style
0.032
Mill Finish
10', 20'
5"
K-Style
0.032
Kynar
Aluminum
Profile
10'
any
Thickness"
Material
Thickness"
Material
6"
K-Style
0.027
Painted
10', 20'
6"
High Back
0.027
Painted
10', 20'
6"
K-Style
0.032
Painted
10', 20'
6"
High Back
0.032
Painted
10', 20'
6"
K-Style
0.024
Mill Finish
10', 20'
6"
High Back
0.024
Mill Finish
10', 20'
10', 20'
6"
High Back
0.032
Mill Finish
10', 20'
any
6"
High Back
0.032
Kynar
6"
K-Style
0.032
Mill Finish
6"
K-Style
0.032
Kynar
Aluminum
Profile
Thickness"
Material
Lengths
Aluminum
Lengths
Aluminum
Profile
Profile
Thickness"
Material
Lengths
10’
Lengths
7"
K-Style
0.032
Painted
10', 20'
7"
High Back
0.032
Painted
7"
K-Style
0.032
Mill Finish
10'
7"
High Back
0.032
Mill Finish
10'
7"
K-Style
0.032
Kynar
any
7"
High Back
0.032
Kynar
10’
Aluminum
Thickness"
Material
8"
K-Style
Profile
0.032
Painted
8"
K-Style
0.032
8"
K-Style
0.032
Lengths
Aluminum
Profile
10', 20'
Thickness"
Material
10', 20'
7"
K-Style
0.032
Painted
Mill Finish
10'
7"
K-Style
0.032
Mill Finish
10'
Kynar
10'
7"
K-Style
0.032
Kynar
10'
Please refer to pages 10-11 for color selection of Kynar painted aluminum.
Also available in non-Kynar painted “High-Gloss White”, “Royal Brown”, or Mill-Finish
16
Lengths
10', 20'
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
K-Style Gutter: Galvanized/Painted Steel
Standard K-Style
Galvanized
Profile
Gauge
High Back K-Style
Material
Lengths
Galvanized
Profile
Gauge
Material
Lengths
5"
K-Style
26
Galvanized
10', 20'
5"
High Back
26
Galvanized
10', 20'
5"
K-Style
24
Galvanized
10', 20'
5"
High Back
24
Galvanized
10'
5"
K-Style
26
Paint Grip
10', 20'
5"
High Back
26
Paint Grip
10'
5"
K-Style
24
Paint Grip
10'
5"
High Back
24
Paint Grip
10'
5"
K-Style
24
Kynar
any
5"
High Back
24
Kynar
10’
Galvanized
Profile
Gauge
Material
Lengths
Galvanized
Profile
Gauge
Material
Lengths
6"
K-Style
26
Galvanized
10', 20'
6"
High Back
26
Galvanized
10', 20'
6"
K-Style
24
Galvanized
10', 20'
6"
High Back
24
Galvanized
10'
6"
K-Style
26
Paint Grip
10', 20'
6"
High Back
26
Paint Grip
10'
6"
K-Style
24
Paint Grip
10'
6"
High Back
24
Paint Grip
10'
6"
K-Style
24
Kynar
any
6"
High Back
24
Kynar
10’
Galvanized
Profile
Gauge
Material
7"
K-Style
26
Galvanized
7"
K-Style
24
Kynar
Galvanized
8"
Profile
K-Style
Gauge
26
Material
Lengths
Galvanized
Profile
Gauge
Material
Lengths
10', 20'
7"
High Back
26
Painted
10'
any
7"
High Back
24
Kynar
10'
Lengths
Galvanized
Profile
Gauge
Material
Lengths
Galvanized
10', 20'
8"
High Back
26
Painted
10'
8"
K-Style
24
Galvanized
10', 20'
8"
High Back
24
Painted
10'
8"
K-Style
24
Kynar
10'
8"
High Back
24
Kynar
10'
8"
K-Style
0.032
Kynar
10'
7"
K-Style
0.032
Kynar
10'
Standard painted steel available in White or Brown.
Please refer to pages 10-11 for color selection of Kynar painted steel..
17
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Half Round-Style Gutter
Half-Round Gutters:
Traditional Bead:
Copper
Specialty*
Zinc
Lengths
5” Half-Round
16oz-20oz
16oz-20oz
—-
10’ and 20’
6” Half-Round
16oz-20oz
16oz-20oz
24ga
any
7” Half-Round
16oz-20oz
16oz-20oz
—-
10’ and 20’
8” Half-Round
16oz-20oz
16oz-20oz
—-
10’ and 20’
Mill-Finish
Aluminum
Galvanized
Lengths
5” Half-Round
.024
26ga-24ga
10’ and 20’
6” Half-Round
.032
26ga-24ga
10’ and 20’
18
”Specialty Coppers” (see pages
7-8) include Revere’s Freedom
Gray and Continental Bronze;
and TECU’s Zinn in addition
to several others..
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Half-Round Gutters:
Reverse Bead:
6" Half Round
Copper
16oz-20oz
Specialty*
16oz-20oz
Zinc
24ga
Half-Round Gutters:
Double Bead:
Copper
5" Half Round
6" Half Round
7” Half Round
8” Half Round
16oz-20oz
16oz-20oz
16oz-20oz
16oz-20oz
Galvanized Lengths
10', 20'
26ga
10', 20'
26ga
10’
26ga
10’
26ga
Half-Round Gutters:
High Back:
5" Half Round
6" Half Round
7” Half Round
8” Half Round
Copper
Specialty*
16oz-20oz
16oz-20oz
16oz-20oz
16oz-20oz
16oz-20oz
16oz-20oz
16oz-20oz
16oz-20oz
Zinc
24ga
24ga
24ga
24ga
Galvanized
26ga
26ga
26ga
26ga
19
Lengths
10', 20'
10', 20'
10’
10’
Kynar
Aluminum
0.032
Lengths
any
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Box Gutters
The ‘Chris’ box gutter is designed for quick
fabrication and easier fabrication than most
other box gutter styles which helps keep costs
down and profits up!
‘Chris’ Box Gutter
10’sections
5" Box
6" Box
7" Box
8" Box
Copper
16oz-48oz
16oz-48oz
16oz-48oz
16oz-48oz
Zinc
24ga-22ga
24ga-22ga
24ga-22ga
24ga-22ga
Aluminum
.032-.063
.032-.063
.032-.063
.032-.063
Steel
Stainless
26ga-16ga 26ga-16ga
26ga-16ga 26ga-16ga
26ga-16ga 26ga-16ga
26ga-16ga 26ga-16ga
A
5"
6"
7"
8"
B
4.875"
5.688"
6.500"
6.915"
C
4"
5"
6"
7"
D
3.875"
4.686"
5.500"
6.000"
High Back ‘Chris’ Box Gutter
10’sections
5" Box
6" Box
7" Box
8" Box
Copper
16oz-48oz
16oz-48oz
16oz-48oz
16oz-48oz
Zinc
24ga-22ga
24ga-22ga
24ga-22ga
24ga-22ga
Aluminum
.032-.063
.032-.063
.032-.063
.032-.063
Steel
Stainless
26ga-16ga 26ga-16ga
26ga-16ga 26ga-16ga
26ga-16ga 26ga-16ga
26ga-16ga 26ga-16ga
20
A
5"
6"
7"
8"
B
4.875"
5.688"
6.500"
6.915"
C
4"
5"
6"
7"
D
3.875"
4.686"
5.500"
6.00"
E
4"
4"
4"
4"
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Custom Gutter Profiles:
Almost any gutter profile can be manufactured or supplied
by Chris Industries, including Historical Reproductions
as well as an infinite number of Custom Profiles. Leave
the design and manufacturing to us so you save money on
your project.
21
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Other Gutter Styles:
22
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Square/Rectangular Downspout Dimensions
Although technically rectangular, the common terminology is to call the rectangular downspout ‘square’. The nominal
dimensions of the ‘square’ downspout are listed below:
2x3
•
•
•
4x5
3x4
Downspout may be available in other material such as TECU’s Zinn®.
24ga steel, .032 aluminum, and 16oz copper are our standard material thicknesses
3x4 and 4x5 downspout is roll-formed and are available in custom lengths
Elbows
Standard Elbows re 75 degree
Elbows at other angles are often available (see below)
Specify whether an “A” or “B” Elbow is needed
Other Elbow Degrees:
23
#0 Elbow
30 degree
#1 Elbow
45 degree
#2 Elbow
60 degree
#3 Elbow
75 degree
#4 Elbow
90 degree
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Square/Rectangular Downspout & Elbows
Downspout
Copper
2x3
2x3
3x4
3x4
3x4
3x4
4x5
4x5
4x5
Elbows
Ounce
16oz
20oz
16oz
20oz
16oz
20oz
16oz
20oz
16oz
Material
Lengths
Copper
10'
Copper
10'
Copper
10'
Copper
any
Freedom Gray®
any
Freedom Gray®
any
Copper
any
Copper
Freedom Gray®
Copper
2x3
3x4
3x4
3x4
3x4
4x5
4x5
4x5
any
any
4x5
Aluminum
2x3
2x3
3x4
3x4
3x4
4x5
4x5
4x5
4x5
20oz Freedom Gray®
any
Lengths
Aluminum Thickness" Material
2x3
0.016 Painted
10'
2x3
0.024 Painted
10'
2x3
0.019 Mill Finish
10'
3x4
0.019 Painted
10'
3x4
0.024 Mill Finish
10'
3x4
0.032 Kynar
any
4x5
0.024 Painted
10'
4x5
0.024 Mill Finish
10'
4x5
0.032 Kynar
any
Steel
Gauge Material
Lengths
2x2
26
Galvanized
10'
2x3
26
Galvanized
10'
2x3
24
Galvanized
10'
2x3
26
Paint Grip
10'
3x4
3x4
3x4
3x4
3x4
4x5
4x5
4x5
4x5
4x5
28
26
24
26
24
28
26
24
26
24
Galvanized
Galvanized
Galvanized
Paint Grip
Kynar
Galvanized
Galvanized
Galvanized
Paint Grip
Kynar
Steel
2x2
2x3
2x3
3x4
3x4
3x4
10'
10'
10'
10'
any
10'
10'
10'
10'
any
3x4
4x5
4x5
4x5
24
Ounce
16oz
16oz
20oz
16oz
20oz
16oz
Material
Copper
Copper
Copper
Freedom Gray®
Freedom Gray®
Copper
Style
A or B
A or B
A or B
A or B
A or B
A or B
20oz
16oz
Copper
Freedom Gray®
A or B
A or B
20oz
Freedom Gray®
Thickness" Material
0.016
Painted
0.016
Mill Finish
0.019
Painted
0.019
Mill Finish
0.032
Kynar
0.024
Painted
0.024
Mill Finish
0.032
Kynar
A or B
Style
A or B
A or B
A or B
A or B
A or B
A or B
A or B
A or B
Gauge
26
26
26
28
26
26
Material
Galvanized
Galvanized
Paint Grip
Galvanized
Galvanized
Paint Grip
A or B
A or B
A or B
A or B
A or B
24
26
26
24
Kynar
Galvanized
Paint Grip
Kynar
A or B
A or B
A or B
A or B
Style
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Two-Piece Elbow Offsets
3x4 "A" Elbows
Elbow Degree
90°
75°
60°
45°
30°
20°
15°
3x4 "B" Elbows
Offset*
13"
9.5"
7"
4.5"
3"
2.5"
1.5"
Elbow Degree
90°
75°
60°
45°
30°
20°
15°
Offset*
14"
10.5"
8"
5.5"
4"
3.5"
2.5"
*Approximate Offset
4x5 "A" Elbows
Elbow Degree
90°
75°
60°
45°
30°
20°
15°
4x5 "B" Elbows
Offset*
14"
10.5"
8"
5.5"
4"
3.5"
2.5"
Elbow Degree
90°
75°
60°
45°
30°
20°
15°
Offset*
15"
11.5"
9"
6.5"
5"
4.5"
3.5"
*Approximate Offset
One-Piece Elbow Offsets
16oz Copper
2x3
2" Offset
2x3
3" Offset
2x3
4" Offset
2x3
5" Offset
3x4
2" Offset
3x4
3x4
3x4
3" Offset
4" Offset
5" Offset
26ga Galvanized
2x3
2" Offset
2x3
3" Offset
2x3
4" Offset
2x3
5" Offset
3x4
3x4
3x4
3x4
2" Offset
3" Offset
4" Offset
5" Offset
What is Kynar/Hylar?
Kynar is the registered trademark of Arkema. Also known as PVDF (Polyvinylideneneflouride), it is a manufactured resin which has high dielectric strength as well as abrasion resistant characteristics. It was accidently
discovered when DuPont was developing Teflon®. This coating is applied via the paint which is applied to both the
PAC-Clad and UNA-Clad (amongst others) sheet and coil products that we then fabricate and roll form into a
variety of gutter, downspout, and other architectural details.
25
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Overhangs, 1-Piece Downspout,
and Radius Downspout
26
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Copper
Smooth Downspout
Copper
Ounce Profile
Material
Smooth Elbows
Copper
Ounce Profile
Lengths
Material
2"
16oz
Smooth
Copper
10'
2"
16oz
Smooth
Copper
3"
16oz
Smooth
Copper
10'
3"
16oz
Smooth
Copper
4"
16oz
Smooth
Copper
any
4"
16oz
Smooth
Copper
4"
20oz
Smooth
Copper
any
4"
20oz
Smooth
Copper
4"
16oz
Smooth
Freedom Gray®
any
4"
16oz
Smooth
Freedom Gray®
4"
20oz
Smooth
Freedom Gray®
any
4"
20oz
Smooth
Freedom Gray®
5"
16oz
Smooth
Copper
10'
5"
16oz
Smooth
Copper
6"
16oz
Smooth
Copper
10'
6"
16oz
Smooth
Copper
Corrugated Downspout
Copper
Ounce Profile
3"
16oz
Corrugated
Material
Copper
Corrugated Elbows
Copper
Ounce Profile
Lengths
3"
10'
16oz
Corrugated
Material
Copper
4"
16oz
Corrugated
Copper
any
4"
16oz
Corrugated
Copper
4"
20oz
Corrugated
Copper
any
4"
20oz
Corrugated
Copper
4"
16oz
Corrugated
Freedom Gray®
any
4"
16oz
Corrugated
Freedom Gray®
4"
20oz
Corrugated
Freedom gray®
any
4"
20oz
Corrugated
Freedom gray®
5"
16oz
Corrugated
Copper
10'
5"
16oz
Corrugated
Copper
6"
16oz
Corrugated
Copper
10'
6"
16oz
Corrugated
Copper
27
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Aluminum
Smooth Downspout
Aluminum
Thickness"
Smooth Elbows
Profile
Material
Thickness"
Profile
Material
10'
3"
0.019
Smooth
Painted
Mill Finish
10'
3"
0.019
Smooth
Mill Finish
Smooth
Painted
10'
4"
0.024
Smooth
Painted
0.024
Smooth
Mill Finish
10'
4"
0.024
Smooth
Mill Finish
4"
0.032
Smooth
Kynar
any
4"
0.032
Smooth
Kynar
5"
0.024
Smooth
Mill Finish
10'
5"
0.024
Smooth
Mill Finish
6"
0.024
Smooth
Mill Finish
10'
6"
0.024
Smooth
Mill Finish
3"
0.019
Smooth
Painted
3"
0.019
Smooth
4"
0.024
4"
Lengths
Aluminum
Aluminum
Thickness"
Corrugated Elbows
Profile
Material
Profile
Material
3"
0.019
Corrugated
Painted
Lengths
10'
Aluminum
3"
0.019
Corrugated
Painted
3"
0.019
Corrugated
Mill Finish
10'
3"
0.019
Corrugated
Mill Finish
4"
0.024
Corrugated
Painted
10'
4"
0.024
Corrugated
Painted
4"
0.024
Corrugated
Mill Finish
10'
4"
0.024
Corrugated
Mill Finish
4"
0.032
Corrugated
Kynar
any
4"
0.032
Corrugated
Kynar
5"
0.024
Corrugated
Mill Finish
10'
5"
0.024
Corrugated
Mill Finish
6"
0.024
Corrugated
Mill Finish
10'
6"
0.024
Corrugated
Mill Finish
28
Thickness"
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Steel
Smooth Elbows
Smooth Downspout
Steel
Gauge
Profile
Material
Lengths
2"
26ga
Smooth
Galvanized
10'
3"
26ga
Smooth
Galvanized
3"
24ga
Smooth
4"
26ga
4"
4"
Steel
Gauge
Profile
Material
2"
26ga
Smooth
Galvanized
10'
3"
26ga
Smooth
Galvanized
Galvanized
10'
3"
24ga
Smooth
Galvanized
Smooth
Galvanized
10'
4"
26ga
Smooth
Galvanized
24ga
Smooth
Galvanized
10'
4"
24ga
Smooth
Galvanized
24ga
Smooth
Kynar
any
4"
24ga
Smooth
Kynar
5"
26ga
Smooth
Galvanized
10'
5"
26ga
Smooth
Galvanized
5"
24ga
Smooth
Galvanized
10'
5"
24ga
Smooth
Galvanized
6"
26ga
Smooth
Galvanized
10'
6"
26ga
Smooth
Galvanized
6"
24ga
Smooth
Galvanized
10'
6"
24ga
Smooth
Galvanized
3"
26ga
Smooth
Paint Grip
10'
3"
26ga
Smooth
Paint Grip
4"
26ga
Smooth
Paint Grip
10'
4"
26ga
Smooth
Paint Grip
5"
26ga
Smooth
Paint Grip
10'
5"
26ga
Smooth
Paint Grip
6"
26ga
Smooth
Paint Grip
10'
6"
26ga
Smooth
Paint Grip
Steel
Gauge
Corrugated Elbows
Profile
Material
Profile
Material
2"
26ga
Corrugated
Galvanized
Lengths
10'
Steel
2"
26ga
Corrugated
Galvanized
3"
26ga
Corrugated
Galvanized
10'
3"
26ga
Corrugated
Galvanized
3"
24ga
Corrugated
Galvanized
10'
3"
24ga
Corrugated
Galvanized
4"
26ga
Corrugated
Galvanized
10'
4"
26ga
Corrugated
Galvanized
4"
24ga
Corrugated
Galvanized
10'
4"
24ga
Corrugated
Galvanized
4"
24ga
Corrugated
Kynar
any
4"
24ga
Corrugated
Kynar
5"
26ga
Corrugated
Galvanized
10'
5"
26ga
Corrugated
Galvanized
5"
24ga
Corrugated
Galvanized
10'
5"
24ga
Corrugated
Galvanized
6"
26ga
Corrugated
Galvanized
10'
6"
26ga
Corrugated
Galvanized
6"
24ga
Corrugated
Galvanized
10'
6"
24ga
Corrugated
Galvanized
3"
26ga
Corrugated
Paint Grip
10'
3"
26ga
Corrugated
Paint Grip
4"
26ga
Corrugated
Paint Grip
10'
4"
26ga
Corrugated
Paint Grip
5"
26ga
Corrugated
Paint Grip
10'
5"
26ga
Corrugated
Paint Grip
6"
26ga
Corrugated
Paint Grip
10'
6"
26ga
Corrugated
Paint Grip
29
Gauge
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Round Offsets
One Piece Offsets:
Smooth 26ga Galvanized
Smooth 16oz Copper
3"
2" Offset
3"
2" Offset
3"
3" Offset
3"
3" Offset
3"
4" Offset
3"
4" Offset
3"
5" Offset
3"
5" Offset
4"
2" Offset
4"
2" Offset
4"
3" Offset
4"
3" Offset
4"
4" Offset
4"
4" Offset
4"
5" Offset
4"
5" Offset
Two Piece Offsets (Smooth or Corrugated):
4" Round Elbows
Elbow Degree
90°
75°
60°
45°
30°
15°
Offset*
13.5"
10.5"
9"
6"
4"
2"
Round elbows & offsets are available
in both Smooth and Corrugated.
*2 elbows will offset this approximate distance.
30
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
K-Style Gutter Hangers
Hidden K-Style Hangers
METAL → Brass Mill Alum. Galvanized
5"
√
√
√
6"
√
√
√
1/8" and 18ga. Crossbar Hanger
METAL → Brass Mill Alum.
5"
√
6"
√
√
7"
√
√
8"
√
√
Hangers come without
screws unless requested
Stainless
√
√
√
√
Wrap Around K-Style Hangers
METAL → Copper Aluminum Galvanized
5"
√
√
√
6"
√
√
√
40K Fascia Hanger with Snap Strap
METAL →
Copper
Aluminum
5"
√
√
6"
√
√
41K Fascia Hanger with Snap Strap
METAL →
Copper
Aluminum
Galvanized
√
√
Galvanized
5"
√
√
√
6"
√
√
√
Spike & Ferrule Sets
METAL →
Copper
5"
6"
√
√
31
* Actual hangers may not be an exact match to
these pictures. Chris Industries distributes hangers
from a variety of manufacturers in order to achieve
the maximum value for our customers.
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Downspout Hangers
Brick Hook
METAL →
2x3
3x4
Galvanized
√
√
Pipe Cleat
Metco Strap / Decorative Strap
METAL →
Copper
Aluminum
2x3
3x4
√
√
√
√
Universal Strap
Copper Aluminum
√
√
2x3
√
√
√
3x4
√
√
√
Mill Alum. Galvanized
√
√
Downspout Hangers
Rack & Key, and Drives
Rack & Key Combo
METAL →
#0 Masonry Drive
Bronze
√
Galvanized
√
Copper
Aluminum
Mill Alum.
Galvanized
√
√
√
√
#6 Drive
Copper
√
Aluminum
√
#4 Wood Drive
Bronze Galvanized
√
√
32
Mill Alum.
√
Galvanized
√
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
K-Style End Caps:
METAL → Copper Aluminum Mill Alum. Galvanized Paint Grip
5"
√
√
√
√
6"
√
√
√
√
7"
√
√
√
√
8"
√
√
√
√
√
K-Style Box Miters:
METAL →
Copper
Aluminum
Mill Alum.
Galvanized
Paint Grip
5"
6"
7"
8"
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Strip Miters :
Bay Miters:
METAL →
Copper
5"
√
6"
√
45 Degree Bay Miter
90 Degree Strip Miter
Outlets
Square Outlets:
METAL →
2x3
3x4
Copper
√
√
Mill Alum.
√
√
Galvanized
√
√
4x5
√
√
√
Oval Outlets:
METAL →
2x3
3x4
Copper
√
√
Mill Alum.
√
√
Galvanized
√
√
33
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Half-Round Style Gutter Hangers
#10 Shank & Circle Combo
METAL →
Copper
5"
√
6"
√
Décor Hanger
METAL →
6"
Aluminum
√
√
Galvanized
√
√
Copper
√
Regal Hanger
METAL → Copper Mill Alum Galvanized
5"
√
√
√
6"
√
√
√
7"
√
√
√
8"
√
√
√
Also Available for Double-Bead Gutter
Deck Hanger CGH6HRF
METAL →
Copper
6"
√
Fascia Hanger CFH5/6HRF
METAL →
Copper
5"
√
6"
√
Wrap Around Hanger/ Rival Strap
METAL →
Copper
Aluminum
5"
√
√
6"
√
√
34
Galvanized
√
√
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Half-Round Style Gutter Hangers
Circle with Spring Clip, Nut & Bolt
METAL → Copper Freedom gray Aluminum Mill Alum. Galvanized
5"
√
√
√
√
√
6"
√
√
√
√
√
METAL →
#6 Shank for Crown Molding
#12 Shank for Nailing to Sheeting
4/12 Pitch
#1 Shank Plate for Circle
Copper
Freedom gray Aluminum Mill Alum.
√
√
√
√
#10 Shank for Fascia
#25 Shank for Nailing to Sheeting
6/12 Pitch
Shanks
Copper
√
Galvanized
√
Shank Extension
35
Galvanized
√
#11 Shank for Nailing to Exposed Rafter
#30 Shank for Adjustable Pitch Rafters
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Metco Strap / Decorative Strap
2x3
√
√
√
3x4
√
√
√
Universal Strap
Copper Aluminum
√
√
Mill Alum. Galvanized
√
√
Downspout Bracket
METAL→ Copper
3"
√
4"
√
5"*
√
6"
√
Zinc
√
√
√
√
Brick Hook
METAL →
2x3
3x4
Galvanized
√
√
Pipe Cleat
METAL→ Copper Aluminum
3" Round
√
√
4" Round
√
√
36
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Rack & Key, and Drives
Rack & Key Combo
METAL →
#0 Masonry Drive
Bronze Galvanized
√
√
Copper
Aluminum
Mill Alum.
Galvanized
√
√
√
√
#4 Wood Drive
Bronze
√
Galvanized
√
This section intentionally left blank-
37
#6 Drive
Copper
√
Aluminum
√
Mill Alum.
√
Galvanized
√
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Half-Round End Caps, Miters, & Outlets
METAL →
5"
6"
7"
8"
Copper
√
√
√
√
Freedom gray Aluminum Mill Alum Galvanized Paint Grip
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Box Miters
METAL → Copper
5"
√
6"
√
7"
√
8"
√
Freedom gray Aluminum Mill Alum Galvanized Paint Grip
√
√
√
√
√
√
√
√
√
√
Outlets
METAL →
3"
4"
5"
6"
Copper
√
√
√
√
38
Freedom gray Aluminum
√
√
√
√
Mill Alum Galvanized
√
√
√
√
√
√
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
European Half-Round Copper Gutter Systems
•
•
•
•
•
Metric Size
280 mm
333 mm
400 mm
s1
20oz
20oz
20oz
39
d1
.71"
.79"
.87"
Welded downspout seams to
help prevent seams from
splitting from internal ice
build-up
Half-Hard temper for greater
strength
18oz gutter and downspout
for greater durability
Stocked in 6” Half round
systems
Also available in 5” and
7.56” half-round systems
d2
5.00"
6.02"
7.56"
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
40
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Bullnose end cap
Copper downspout
bracket
41
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Leader Heads
42
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Fasteners
Copper Nails
penny size
4d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
6d
8d
length
7/8
1
1
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2
2
2 1/4
2 1/4
2 1/2
2 1/2
2 3/4
3
gauge shank diameter head diameter count/lb*
12
0.109
11/32
379
11
0.120
3/8
229
9
0.171
3/8
183
11
0.120
3/8
197
9
0.171
3/8
158
11
0.120
3/8
169
10
0.134
3/8
152
9
0.171
3/8
136
11
0.120
3/8
145
9
0.171
3/8
110
11
0.120
3/8
124
10
0.134
3/8
112
9
0.171
3/8
100
11
0.120
3/8
116
9
0.171
3/8
90
11
0.120
3/8
110
10
0.134
3/8
100
11
0.120
3/8
80
9
0.171
27/64
62
*estimated count
stainless and common nails available via special order
Copper Rivets
Painted Rivets
solid brass mandrill
stainless mandrill
Size
#42
#44
Size
#43
Grip Range pcs/box
.063-.125
100
.188-.250
100
Grip Range pcs/box
.126-.187
100
*Painted to match PAC– Clad
and UNA-Clad colors. See
pages 10-11 for color selection.
43
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Rivets, Screws, Paint, & Caulk
PAC-Clad Color
Almond
NPC
Nova-Flex
Rivets
Screws
Paint
Caulk
Caulk
√
√
√
√
√
Arcadia Green
√
√
√
custom
custom
Award Blue
√
√
√
custom
√
Berkshire Blue
√
√
√
custom
√
Bone White
√
√
√
√
√
Burgundy
√
√
√
custom
√
Cardinal Red
√
√
√
custom
√
Charcoal
√
√
√
√
√
Cityscape
√
√
√
custom
custom
Colonial Red
√
√
√
√
√
Dark Bronze
√
√
√
√
√
Evergreen
√
√
√
√
custom
Forest Green
√
√
√
√
√
Granite
√
√
√
√
√
Hartford Green
√
√
√
√
custom
Hemlock Green
√
√
√
√
√
Hunter Green
√
√
√
√
custom
Interstate Blue
√
√
√
custom
√
Mansard Brown
√
√
√
√
√
Matte Black
√
√
√
√
√
Medium Bronze
√
√
√
√
custom
Midnight Bronze
√
√
√
custom
custom
Military Blue
√
√
√
√
custom
√
Musket Gray
√
√
Patina Green
√
√
Sandstone
√
√
√
Sierra Tan
√
√
√
√
√
Slate Blue
√
√
√
custom
custom
Slate Gray
√
√
√
√
custom
Stone White
√
√
√
√
√
Teal
√
√
√
custom
custom
Terra Cotta
√
√
√
custom
√
Aged Copper*
√
√
√
custom
custom
√
√
√
custom
custom
√
√
Champagne*
√
√
√
custom
custom
Copper Penny*
√
√
√
√
√
Silver*
√
√
√
√
√
Weathered Zinc*
√
√
√
custom
custom
Zinc*
√
√
√
custom
custom
√
√
Clear
44
Caulk guns also available
NPC caulk is a terpolymer sealant which
has excellent adhesion to most surfaces
including: metal, Kynar®, asphalt,
shingles, modified bitumen, EPDM,
TPO, Elvaloy/PVC, Hypalon, vinyl, fiber
cement, wood, concrete, tile, masonry,
and glass.
Nova-Flex is a silicone based sealant
which stands up to extreme weather,
cures soft, and remains flexible. silicone
adheres to nonporous substrates better
than any other sealant, making it the best
choice for surfaces such as glass, metal,
ceramic tile, and porcelain.
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Fasteners
Screws
type
Machine
Machine
Machine
Machine
Machine
Machine
Machine
Machine
Hex Nut
Hex Nut
Wood
Wood
Wood
Wood
Wood
Wood
Wood
Wood
Wood
Wood
Wood
Wood
Wood
size
10x24
10x24
10x24
10x24
10x24
10x24
10x24
10x24
10x24
10x24
#10
#10
#10
#10
#10
#10
#10
#10
#10
#10
#10
#10
#10
length
.5"
.75"
1"
1.5"
2"
.5"
.75"
1"
1"
1.5"
1.75"
2"
2.25"
2.5"
2.75"
3"
1.5"
1.75"
2"
2.5"
2.25"
metal
Brass
Brass
Brass
Brass
Brass
Stainless
Stainless
Stainless
Brass
Stainless
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Stainless
Stainless
Stainless
Stainless
Stainless
type
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
Speed Screw
size
#7
#8
#8
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
length
.5"
.5"
1"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
.5"
*Painted to match PAC– Clad
and UNA-Clad colors. See
pages 10-11 for color selection.
45
metal
Color
Stainless
Galvanized
Galvanized
Stainless
Almond
Stainless
Colonial Red
Stainless
Copper Penny
Stainless
Dark Bronze
Stainless
Forest Green
Stainless
Granite
Stainless
Hartford Green
Stainless
Hemlock Green
Stainless
Mansard Brown
Stainless
Matte Black
Stainless
Medium Bronze
Stainless
Sandstone
Stainless
Sierra Tan
Stainless
White
Stainless
Zinc
Copper Coated Stainless
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Soldering Equipment
Solder Bar
Sal-Bars
bar size
tin/lead % bars / lb. Melting Pt .
Small (meter)
50/50
4
419° F
Medium
50/50
1
419° F
Small (meter)
60/40
4
374° F
Medium
60/40
1
374° F
Small (meter)
95/5
4
435° F
Medium
95/5
1
435° F
Small (meter)
100/0
4
450° F
Medium
100/0
1
450° F
Sal-Ammoniac Bar
Sal-Ammoniac Bar
Sal-Ammoniac Bar
Acid Brush
Acid Brush
Size
.25 lb
.5 lb
1 lb
Size
.375"
pcs/box
144
Spool solder wire also available
Flux
Use
MA
Copper or Stainless
Johnson's Galvanized
Express
Copper
Express
Oxidized Copper
Soldering Set
Size
Quart
Quart
11.5oz
11.5oz
•
•
•
Acid Brush
Sal Bar
Flux
Non slip bottom
46
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
47
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sievert Soldering Irons:
Sievert PSI 3380 Portable Soldering Iron
No tanks or hoses
Runs off gas canister located in handle
Comes with 8oz bit
Can also use 12oz bit (7003-50 below)
•
•
•
•
SIK2-30: Standard Kit
• 4’ hose
• 14oz pyramid soldering bit
• Regulator
• Carrying bag
SIK2-30: Standard Kit
25’ hose
14oz pyramid soldering bit
Regulator
Carrying bag
Pre-set LP
•
•
•
•
•
Sievert Soldering Bits:
Pin Point Bit #884392
12oz Hammer Bit #7003-50
14oz Pyramid Bit #7004-00
48
18oz Hammer Bit #7005-00
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Hand Soldering Irons:
Item
#'s/pair
#'s/iron
Pointed Hand Iron
2
1
Pointed Hand Iron
3
1.5
Pointed Hand Iron
4
2
Pointed Hand Iron
5
2.5
Pointed Hand Iron
6
3
Chisel Hand Iron
2
1
Chisel Hand Iron
3
1.5
Chisel Hand Iron
4
2
Hatchet Hand Iron
4
2
Hatchet Hand Iron
6
3
Hatchet Hand Iron
8
4
Double burners and a refractory lining enable
unit to heat several coppers at one time, fast!
This bench mounted furnace is made of cast
iron and is built to last. Specify Nat. or LP gas
49
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Other Items
Adjustable Copper Pipe Vents:
Diameter
Pitch
3"
up to 10/12
4"
up to 10/12
5"
up to 10/12
*Lead Stacks also available
Frost Resistant Plumbing Vents:
Regular Pitch
1/12 to 11/12
2"
3"
4"
5"
High Pitch
5/12 to 15/12
2"
3"
4"
5"
Gutter Screens:
Item
5" Copper Gutter Screen
6" Copper Gutter Screen
6" Copper Gutter Screen for 6" Half Round
5"/6" Copper Gutter Shingle
5" Galvanized Gutter Screen
6" Galvanized Gutter Screen
5"/6" Powder Coat Gutter Shingle
Dimensions
5" x 3'
6" x 3'
6" x 3'
7.25" x 3'
5" x 3'
6" x 3'
7.25" x 3'
50
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Screen & Wire:
Item
Copper Wire Spool
Copper Bug Screen
Copper Bird Screen
Copper Bird Screen
TECU- Net Copper
TECU- Net Copper
Dimensions
.058"d. x 10 lb.
.011"d. x 1/16" opening x 36" w.
.047"d. x 1/4" opening x 36" w.
.063"d. x 1/2" opening x 36" w.
.021" x 39.37"w x 78.74"l
.028" x 39.37"w x 78.74"l
Description
16ga soft copper wire
1/16" openings
1/4" openings
1/2" openings
Expanded copper sheet
Expanded copper sheet
Vented Ridge:
•
•
•
•
•
10’sections
Available in Copper, Steel, or aluminum
Can be manufactured with a variety of heights to be compatible
with metal roof panels, shakes, tile, slate or shingle
Manufactured to specific roof pitch
1 piece or 3 piece ridge available
1 Piece
Copper Ridge Roll:
•
•
10’ sections
Available in 16oz Copper;.0169 white,
brown, or mill finish aluminum; and
28ga Galvanized
3 Piece
Downspout Basket Strainers:
Copper
3"
4"
5"
6"
Splash-Guards:
•
•
•
Zinc
3"
4"
5"
6"
51
For Inside or Outside Miters
Works on Half Round, Box, or K Gutter
Available in Copper, Aluminum, or steel
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Copper Soffit
•
•
•
•
Full Vent
16 oz Copper
12’ Lengths
*Aluminum Soffit also available
Chemical Finishes:
Item
Size:
Description:
Green Patina
Quart
Applies a blue/green patina to copper
Copper Patina
Pint
Applies copper color to solder
Brown Patina
Pint
Applies a brown patina to copper
Black Patina
Pint
Applies a black patina to copper
This section intentionally left blank-
52
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Tools– by Freund®
High Quality Sheet Metal Tools manufactured in Germany
Hammers:
0021650
Slate Hammer
• Rhenish Pattern
• Left or Right Handed
00114002
Roofers Hammer 1
• Forged Steel
• Bi component handle
• Magnetic Nail Holder
01678145
•
•
PVC Hammer
Rectangular Head
Slater’s Anvil
• Straight Top
• Ground Edges
Roofers Hammer 2
• Steel Tube Handle
• PVC Handle
• Magnetic Nail Holder
01674000
01688070
•
•
PVC Hammer
Round Head
•
•
PVC Hammer
Axe Head
Hand Notcher:
Slater’s Anvils:
00310000
0010698
00311000
Hand Notcher
• For straight incision cuts
• 35mm notching length
Slater’s Anvil
• Curved Top
• Ground Edges
53
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Snips:
Genuine Aviation Snips:
• Stainless Steel
• Compound Leverage
Lefts
01281240
Rights 01280240
Straight 01282240
Offset Snips:
Upright Snips:
• Stainless Steel
Lefts
01291240
Rights 01290240
• Stainless Steel
Lefts
01297200
Rights 01296200
Clinching Pliers:
01080100
Straight Clinching Pliers:
•
•
Depth
Width
•
•
•
45 degree
Depth 1.89” (45mm)
Width 2.36” (60mm)
•
•
•
Compound Leverage
Depth 1.26” (32mm)
Width 3.15” (80mm)
Compound Leverage
Depth 1.26” (32mm)
Width 3.15” (80mm)
01092040
01091060
•
•
•
45 degree Clinching Pliers:
Straight Clinching Pliers:
3.94” (100mm)
2.56” (65mm)
Angled Clinching Pliers:
01093080
01080150
Angled Clinching Pliers:
•
•
•
90 degree
Depth 2.13” (54mm)
Width 1.57” (40mm)
54
01070250
Seam Opening Pliers:
•
•
Opens double lock panel seams
Width 1.18” (30mm)
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Stage 1:
Panel Closers:
Stage One Closer
• 8.67” Wide
• 15.33” Long
• Works on 1” to 2” Double lock panels
• Epoxy Finish
91100000
Stage 2:
9117000
Stage Two Closer
• 8.67” Wide
• 19” Long
• Epoxy Finish
Upright Panel Closers:
Stage One Closer
• 8.67” Wide
• 28.33” Long
• Epoxy Finish
91101000
Stage Two Closer
• 8.67” Wide
• 28.33” Long
• Epoxy Finish
91171000
55
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Eave Tools:
•
•
•
•
•
•
•
•
•
•
#9107000
10” Width
1.5” Depth
Turns eaves and panel ends >90 degrees
Epoxy Finish
#9108000
8.75” Width
2.3” Depth
Folds and Closes Eaves
Epoxy Finish
Crimper:
Scriber:
Folding Pliers:
01130000
0132003
•
•
•
•
•
5 Blade
Stainless Steel
Reduces Pipe Diameter
01133000
56
Forged Steel
5.5” Depth (140 mm)
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Roof Panels
Panels can be run on local job sites
Available in:
• Copper
• 24ga Kynar Steel
• 032 Kynar Aluminum
Roof Clips: (per ESE Machines)
1 cleat should be responsible for every 1-1/2 sq./ft. of roof area. Therefore the
formula to get the total number of cleats required: Divide sq./ft. of the roof area
by 1.5 = number of cleats for that roof. A 12” wide panel should have cleats
every 18”, an 18” wide panel should have cleats every 12”, and a 24” wide
panel should have cleats every 9”.
57
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Roof Panel - Options
Roof Panel - Clips
Available in 26ga Galvanized,
Galvalume, or Stainless Steel
Available in 26ga Galvanized,
Galvalume, or Stainless Steel
Available in 18ga Galvanized
or Stainless Steel
•
58
Actual profile may vary slightly
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Valley Flashings
1.25” Valley
• Copper
• 24ga Steel
• .032 Aluminum
• Roll-Formed to Custom Lengths
• 5/12 Pitch
• Lengths from 1 to 30 feet!
1” Valley
• Copper
• 24ga Steel
• .032 Aluminum
• Formed to any pitch or split pitch
• 8 or 10 foot Lengths
1.5” Valley
• Copper
• 24ga Steel
• .032 Aluminum
• Formed to any pitch or split pitch
• 8 or 10 foot Lengths
*See Appendix A for Installation Diagram.
59
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Roof Flashings
•
•
•
•
•
•
•
8’ or 10’ lengths
Copper
24ga Painted Steel
Galvanized
Stainless Steel
.032 Painted Aluminum
Mill Aluminum
Outside Drip Edge (ODE)
Roof to Wall
Apron
Gravel Stop
•
•
•
•
•
•
•
60
Copper
24ga Painted Steel
Galvanized
Stainless Steel
Mill Aluminum
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Counter Flashing
•
•
•
•
•
•
•
Boston
Surface Mount
61
Copper
24ga Painted Steel
Galvanized
Stainless Steel
Mill Aluminum
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Roof Flashings
•
•
•
Stocked in Copper
Other sizes available
Available in:
• Aluminum
• Stainless
• Steel
Shake Tins
Baby Tins
Vented Ridge Cap
Panels Starter
•
•
•
•
Available in copper in 8’ and 10’ sections
Available in steel, aluminum, or stainless in 10’ sections
Customized sizes
Please specify the roof pitch when ordering
Coping
62
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Roll-Forming Services
Machines:
• 5” K-Style Gutter (on site or pick-up)
• 6” K-Style Gutter (on site or pick-up)
• 7” K-Style Gutter
• 6” Half Round Gutter
• 1.25” W-Valley
•
•
•
•
3x4 Downspout & Elbows
4x5 Downspout & Elbows
4” Smooth Round Downspout & Elbows
4” Round Corrugated Downspout & Elbows
Custom Lengths available for all
roll-formed products!
63
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Sheet Metal Fabrication
Conductor Boxes ……….. Pages 65-80
Finials / Spires ………….. Pages 81-97
Dormers …………………. Pages 98-99
Vented Dormers …………. Page 100
The following pages contain drawings of fabricated items that have been produced by Chris Industries.
Chris can make modifications to any of the boxes shown to fit your needs, or help you create your own
design.
64
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
65
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
66
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
67
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
68
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
69
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
70
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
71
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
72
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
73
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
74
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
75
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
76
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
77
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
78
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
79
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Other designs, replicas, and historical
reproductions can also be made from
copper and a variety of other metals.
Also available, copper conductors
manufactured in Germany!
→
80
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
81
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
82
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
83
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
84
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
85
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
finials page 5.jpf
86
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
87
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
88
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
89
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
90
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
91
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
92
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
93
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
94
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
95
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
96
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
97
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
98
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Dormers
99
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
100
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
101
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Snow Guards:
102
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Snow Guards:
103
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Appendix A: Metal Corrosion
Corrosion:
All metals have a property called “nobility.” It is a measure of a metal’s resistance to corrosion when in contact with another metal. A greater relative distance in nobility between two metals, the greater the potential for
corrosion to occur. Table 1.1.14 ranks the most common metals used in construction in decreasing nobility.
Copper will corrode all the other listed metals; it is mildly corrosive to lead, while extremely corrosive to zinc
and aluminum.
When dissimilar metals are in contact with each other in the presence of an electrolyte (e.g. water), corrosion can occur to the less
noble metal resulting in deterioration of the less noble metal.
It is not necessary to isolate copper from lead, tin, or stainless
steel under most circumstances. Iron and steel are generally not a
problem unless their mass is small in comparison to the copper.
Taping or gasketing with non-absorptive materials or sealants can
be affective methods of separating copper from all other metals.
8
7
6
5
4
3
2
1
TABLE 1.1.14
Stainless Steel (passive)
Copper
Lead
Tin
Stainless Steel (active)
Iron
Steel
Zinc
Aluminum
Regardless of the method used to separate metals, wash from copper surfaces should be prevented from
draining onto exposed aluminum. Copper salts from in the wash may accelerate the corrosion of the
aluminum.
Another type of corrosion which affects copper is caused by the flow of acidic water concentrated on a
small area of copper. This type is often called “erosion corrosion”, and occurs when rain falls on a noncopper roof such as tile, slate, wood, or asphalt. The acidic water is not neutralized as it flows over the
inert material. When water, collected over a large surface, is diverted or collected by a relatively small
copper flashing or gutter, the copper may deteriorate before it develops a protective patina.
Another type of corrosion occurs at the drip edge of inert roofing material conducting water into a copper gutter or valley. If shingles rest directly on the copper, the corrosive affect is amplified because
moisture is held along the edge by capillary action resulting in “line-corrosion.” The solution is to raise
the lower edge of the shingle with a cant strip, or to provide a replaceable reinforcing strip between the
shingles and the copper.
104
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
Appendix B: Valley Installation Diagram
105
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
106
2810 Old Willow Rd
CHRIS
126 McDonald Ave
Joliet, IL 60431
800-356-7922
847-729-9292
847-729-0340 Fax
INDUSTRIES, INC
800-356-7162
815-725-3030
815-725-3344 Fax
www.ChrisInd.com
[email protected]
107

PDF Catalog - Chris Industries

Transcription

Similar documents