M Series

Transcription

M Series

M Series
Round Line, Non-Repairable Cylinder Line
w w w. n u m a t i c s . c o m
Table of Contents
M Series
Features and Benefits
3
How to Order
Length Adders
5/16" Bore Cylinder
8-9
7/16" Bore Cylinder
10-12
9/16" Bore Cylinder
13-15
3/4" Bore Cylinder
16-19
7/8" Bore Cylinder
20-22
1-1/16" Bore Cylinder
23-26
27-29
30-33
34-35
2" Bore Cylinder
36-38
39
3" Bore Cylinder
40
Adjustable Cushion Cylinder
Volume Chambers
43
Custom Cylinders
44
Multi-Position Cylinders
44-45
Single Acting with Magnet Cylinders
46-49
Hole Punch Cylinders
50-51
Mounting Nuts
52
Nose Mounting Brackets
53
Pivot Mounting Brackets
54
Rod Clevis
55
World Application Detail
56
World Switch Information
56-57
Sensing Part Numbers
58-60
Quick Disconnect Cables
5-6
7
41-42
61
M
SERIES
The M Series is a stainless steel body air cylinder line that is the perfect solution for tight design budgets. This cylinder is reliable
and is designed and built to maximize performance. It will exceed all of your light-duty cylinder application requirements. The M
Series comes standard with a multitude of value-added features such as stainless steel piston rods, roll-formed threads at both
ends of the piston rod, and pre-lubed for non-lube added service. Furthermore, Numatics has the design capabilities to customize
a product for your specific application. These are just a sample of things that make the M Series the Superior Interchangeable
round body air cylinder line.
Piston Rod
The type 303 stainless steel piston rod is ground, polished,
and roller burnished for a mirror finish to ensure corrosion-free
longevity.
Rod Thread
Roll-formed rod threads (at both ends) ensure a durable
customer-end connection as well as piston to rod connection.
Rod Bushing
Oil impregnated sintered bronze rod bushing provides excellent
wear resistance and anti-friction qualities for smooth operation
and long life.
End Caps
The end caps are made from a high strength aluminum alloy.
Ports
Unrestricted (full-flow) ports in conjunction with rectangular
slots on the piston-mating surface (at both ends) enable
the air to work on a larger piston area for effortless
breakaway (even at low pressures).
Tube
The type 304 stainless steel tube, drawn and
polished to a micro-inch finish on the I.D., enables
low friction and longevity.
Crimp
The cylinder body is attached to the end caps using
innovative assembly equipment that ensures a
consistent and reliable double rolled-in crimp.
Piston
High strength aluminum alloy piston with blow-by flats
(double acting only) ensure proper and rapid seal inflation. Piston rod
connections are threaded (roll-formed threads), sealed with Loctite
Threadlocker®, torqued, and staked for a solid, leak-proof connection.
Piston Seals
Low friction Buna N “U” cup piston seals (optional low and high
temperature seals) are wear compensating for millions of maintenance
free cycles.
Magnet
Magnetic band position indication is optional in 9/16” – 3” bore sizes.
The magnet does not affect the overall length of the cylinder 3/4” – 3”
bore sizes (double acting only) but does add .250” to the overall length
of the 9/16” bore cylinders.
Rod Seal
The low friction Buna N “U” cup rod seal (optional low and high
temperature seals) is wear compensating to ensure longevity.
Pre-Lubricated
Pre-lubricated with our specially formulated oil based compound for
extensive maintenance free performance.
Threadlocker® is a registered trademark to the Loctite Corporation.
Standard Specifications:
•
•
•
•
•
•
•
•
303 stainless steel piston rods are standard
304 stainless steel cylinder tube
Aluminum head and caps
Maximum pressure rating is 250 psi air
Twelve bore sizes – 5/16” – 3”
Standard temperature -10°F to +165°F
Single and double acting
Double rods
Optional Specifications:
•
•
•
•
•
•
Magnetic pistons
Adjustable cushions
Corrosion resistant end caps
Double rods
High and low temperature seals
Rod wipers
Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
3
M
SERIES
Standard M Series Mounts
Single Acting
Single Acting
Spring Return Nose
Mount (S01)
Single Acting Spring
Return Rear Pivot
Mount (S02)
Single Acting
Spring Extend
Nose Mount (R01)
Extend Rear Pivot
Mount (R02)
Return Non-Rotating
Nose Mount (N01)
Return Non-Rotating
Rear Pivot Mount (N02)
Return Front Block
Mount (S05)
Return Trunnion
Mount (S06)
Extend Front Block
Mount (R05)
Extend Trunnion
Mount (R06)
Double Acting
Double Acting Nose
Mount (D01)
Double Acting Rear
Pivot Mount (D02)
Double Acting Through
Rod Mount (D03)
Double Acting Double
Nose Mount (D04)
Double Acting Front
Block Mount (D05)
Double Acting
Trunnion Mount (D06)
Interchange Option
for the 1 1/16“ Bore
Double Acting Through
Rod (D13)
Double Acting
Through Rod Hollow
Rod Mount (DH3)
Double Acting
Adjustable Cushion
Nose Mount (DG1)
Double Acting
Adjustable Cushion
Rear Pivot Mount
(DG2)
Double Acting Corrosion Double Acting Corrosion
Resistant Rear Pivot
Resistant Nose Mount
Mount (DC2)
(DC1)
Volume Chambers
Nose Mount Volume
Chamber (V01)
Double Acting Corrosion Double Acting Nose
Resistant Through Rod Mount, 2” Bore, 1”
Mount (DC3)
Rod (DL1)
Double Acting Rear
Pivot Mount, 2” Bore,
1” Rod (DL2)
Rear Pivot Mount
Volume Chamber (V02)
*For a complete offering a dimensional
drawings by mounting type, see the
comprehensive M Series catalog PDF via the
following path: www.numatics.com
4
M
SERIES
How to Order
Base Models
1500
D01 - 02
Bore Size
0313 = 5/16"
0438 = 7/16"
0563 = 9/16"
0750 = 3/4"
0875 = 7/8"
1062 = 1-1/16"
1250 = 1-1/4"
1500 = 1-1/2"
1750 = 1-3/4"
2000 = 2"
2500 = 2-1/2"
3000 = 3"
Mounting Style
S01 = Single Acting Spring Return
Nose Mount
S02 = Single Acting Spring Return
Rear Pivot
R01 = Single Acting Spring Extend
Nose Mount
R02 = Single Acting Spring Extend
Rear Pivot
N01 = Single Acting Spring Return
Non-Rotating Nose Mount
N02 = Single Acting Spring Return
Non-Rotating Rear Pivot
D01 = Double Acting Nose Mount
D02 = Double Acting Rear Pivot
D03 = Double Acting Through Rod
D04 = Double Acting Double Nose
D05 = Double Acting Front Block
D13 = Interchange Option for 1-1/16" Bore
Double Acting, Through Rod
DH3 = Double Acting Through Rod
Hollow Rod
D06 = Double Acting Trunnion Mount
DG1 = Double Acting Adjustable Cushion
Nose Mount
DG2 = Double Acting Adjustable Cushion
Rear Pivot
DL1 = Double Acting Nose Mount
2" Bore, 1" Rod
DL2 = Double Acting Rear Pivot
2" Bore, 1" Rod
DC1 = Double Acting Corrosion Resistant
Nose Mount
Rear Pivot
Through Rod
V01 = Nose Mount Volume Chamber
V02 = Rear Pivot Mount Volume Chamber
DM1 = Nose Mount MRS Interchange
DM2 = Rear Pivot Mount MRS Interchange
A - 01 - 1A01A
Rod and/or Thread Extension
Note: Leave blank if rod and/or thread extension is not required.
1A
2A
RT
= Rod Extension (must specify extension)
Example: 1A 01A (full and fractional length)
= Thread Extension (must specify extension)
Example: 2A 01A (full and fractional length)
= Rod and Thread Extension (must specify extension)
Example: RT 01A01A (full and fractional length)
Note: When applying the RT option, rod extension length must be specified first
and the thread extension length must be specified last. Also, consult factory
for double-rod cylinders.
Options
00
= No Options (or leave blank)
01
= Bumpers*
02
= FKM Seals
03
= Magnet**
04
= Bumpers with Magnet* (See notes below for details.)
05
= Pivot Bushing***
06
= Pivot Bushing with Bumpers* (See notes below for details.
07
= Pivot Bushing with FKM Seals
08
= Pivot Bushing with Magnet* (See notes below for details.)
09
= Pivot Bushing with Bumper
and Magnet* (See notes below for details.)
See next page for a comprehensive list of options.
* Bumpers available on 9/16" through 3” Bore Cylinders. See specific drawing/
section and/or length adder charts for length adder information.
(N/A on DG1 and DG2 types).
** Magnet available on 9/16" Bore. See specific drawing/section and/or length
adder charts for length adder information.
*** Pivot Bushing standard on 5/16”, 9/16”, 2”, 2-21/2”, and 3” bore sizes.
Optional on all other Rear Pivot cylinders.
Fractional Inch Stroke
= 0" Stroke
A
= 1/16" Stroke
B
= 1/8" Stroke
C
= 3/16" Stroke
D
= 1/4" Stroke
E
= 5/16" Stroke
F
= 3/8" Stroke
G
= 7/16" Stroke
H
= 1/2" Stroke
I
= 9/16" Stroke
J
= 5/8" Stroke
K
= 11/16" Stroke
L
= 3/4" Stroke
M
= 13/16" Stroke
N
= 7/8" Stroke
O
= 15/16" Stroke
P
Full Inch Stroke
00
= 0" Stroke
01
= 1" Stroke
02
= 2" Stroke
03
= 3" Stroke
32
= 32" Stroke (maximum)
See specific cylinder drawing/section at www.Numatics.com
for maximum stroke
5
M
SERIES
How to Order
Standard M Series Options
Standard M Series Options
01 = Bumpers
02 = FKM Seals
03 = Magnet
04 = Bumpers with Magnet
05 = Pivot Bushing
06 = Pivot Bushing with Bumpers
Available with these mounting styles:
07 = Pivot Bushing with FKM Seals
D02, S02, R02, N02, DG2
08 = Pivot Bushing with Magnet
09 = Pivot Bushing with Bumper and Magnet
20 = Port Rotated with No Options
30 = Rod Wiper with No Options
31 = Rod Wiper with Bumpers
32* = Rod Wiper with FKM Seals
33 = Rod Wiper with Magnet
Rod Wiper option available
34 = Rod Wiper with Bumpers and Magnet
on 3/4" Bore and Up.
35 = Rod Wiper with Pivot Bushing
Not available with these mount
36 = Rod Wiper with Bumpers and Pivot Bushing
styles: S01, S02, N01, N02
37 = Rod Wiper with FKM Seals and Pivot Bushing
38 = Rod Wiper with Magnet and Pivot Bushing
39 = Rod Wiper with Bumpers, Magnet and
Pivot Bushing
100 = Low Temp Seals
101 = Low Temp Seals and Bumpers
103 = Low Temp Seals and Magnet
104 = Low Temp Seals, Bumpers and Magnet
Low Temperature Seals option
105 = Low Temp Seals and Pivot Bushing
available on 7/16" Bore and Up.
106 = Low Temp Seals, Bumpers and Pivot Bushing
108 = Low Temp Seals, Magnet and Pivot Bushing
109 = Low Temp Seals, Bumpers, Magnet and
Pivot Bushing
200 =
PolyPak Rod Seal
3/4" Bore and Up
300 =
PolyPak Piston Seal
400 =
PolyPak Piston and Rod Seal
* The rod wiper is Urethane except for 3/4”, 1-1/16”, 2”
Additional M Series Options
21
22
23
24
25
26
28
29
40
45
50
51
52
53
54
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
Bumpers with Ports Rotated
FKM Seals with Ports Rotated
Magnet with Ports Rotated
Bumpers with Magnet and Ports Rotated
Pivot Bushing with Ports Rotated
Bumpers with Pivot Bushing and Ports Rotated
Magnet with Pivot Bushing and Ports Rotated
Bumpers and Magnet with Pivot Bushing and Ports Rotated
Ports Rotated with Wiper
Pivot Bushing with Ports Rotated and Wiper
Side Port
Bumpers and Side Port
FKM Seals and Side Port
Magnet and Side Port
Bumpers with Magnet and Side Port
Note: Please contact factory or your sales rep for compatibility on these
additional options.
Visit www.Numatics.com
for bore size availability
How To Order – Examples
0438S01-01A
0438 = 7/16" Bore
S01 = Single Acting, Spring Return, Nose Mount
01 = 1" Stroke
A = .00" Fractional Stroke
1062D02-03E-04
1062 = 1-1/16" Bore
D02 = Double Acting, Rear Pivot Mount
03 = 3" Stroke
E = .25" Fractional Stroke
04 = Bumpers and Magnet
1500D04-10I-01-1A02A
1500 = 1-1/2" Bore
D04 = Double Acting, Double Nose
10 = 10" Stroke
I = .50" Fractional Stroke
01 = Bumpers
1A02A = 2" Rod Extension
2000DG2-20H-03-RT02A01I
6
2000 = 2" Bore
DG2 = Double Acting, Adjustable Cushion, Rear Pivot Mount
20 = 20" Stroke
H = .4375 Fractional Stroke
03 = Magnet
RT02A01I = 2" Rod Extension and 1-1/2" Thread Extension
M
SERIES
Length Adders
01 Option (Bumpers)
Bore
Single Acting
S01, S02, RO1, R02
N01, N02
Double Acting
D01, D02
Corrosion Resistant
DC1, DC2
Double Acting
D03
0.313
N/A
N/A
N/A
N/A
0.438
N/A
N/A
N/A
N/A
0.563
0.062
0.125
N/A
0.125
0.750
0.125
No Adder
0.281
0.25
0.875
No Adder
No Adder
N/A
0.25
1.062
0.125
0.125
0.375
0.25
1.250
No Adder
No Adder
N/A
0.25
1.500
No Adder
0.125
0.375
0.25
1.750
No Adder
No Adder
N/A
0.25
2.000
No Adder
0.250
N/A
0.25
2.500
N/A
0.062
N/A
N/A
3.000
N/A
0.062
N/A
N/A
03 Option (Magnet)
04 Option (Bumper and Magnet)
Bore
Single Acting
S01, S02, RO1, R02
N01, N02
Double Acting
D01, D02, D03
Corrosion
Resistant
DC1, DC2
Bore
Single Acting
S01, S02, RO1, R02
N01, N02
Double Acting
D01, D02
Corrosion
Resistant
DC1, DC2
Double
Acting
D03
0.313
N/A
N/A
N/A
0.313
N/A
N/A
N/A
N/A
0.438
N/A
N/A
N/A
0.438
N/A
N/A
N/A
N/A
0.713
0.375
N/A
0.375
0.563
0.531
0.250
N/A
0.563
0.750
0.688
No Adder
0.281
0.750
0.890
0.125
0.406
0.25
0.875
0.531
No Adder
N/A
0.875
0.733
0.125
N/A
0.25
1.062
0.765
(R01 = 0687)
0.125
0.375
0.25
1.250
0.734
0.125
N/A
0.25
1.500
0.765
(R01 = 0827, N01 = 0.750)
0.250
0.500
0.25
1.062
0.562
No Adder
0.250
1.250
0.531
No Adder
N/A
1.500
0.437
(R01 = 0.500)
No Adder
0.250
1.750
0.656
No Adder
N/A
0.461
(R01 & R02 = 0.714)
1.750
0.735
0.000
N/A
0.25
2.000
No Adder
N/A
2.000
0.789
0.250
N/A
0.25
N/A
2.500
N/A
0.062
N/A
N/A
N/A
3.000
N/A
0.062
N/A
N/A
2.500
N/A
3.000
No Adder
N/A
No Adder
Nose Torque Specs
DC1 Mount (Delrin Nose Thread)
D01 Mount (Aluminum Nose Thread)
Bore
5/16
Torque (In-Lbs)
60.0
Torque (Ft-Lbs)
Bore
Torque (In-Lbs)
Torque (Ft-Lbs)
5.0
3/4
12.0
1.0
7/16
84.0
7.0
1-1/16
12.0
1.0
9/16
84.0
7.0
1-1/2
30.0
2.5
3/4
336.0
28.0
7/8
336.0
28.0
1-1/16
336.0
28.0
1-1/4
480.0
40.0
1-1/2
480.0
40.0
1-3/4
1200.0
100.0
2
1440.0
120.0
2-1/2
1560.0
130.0
3
1680.0
140.0
7
M
SERIES
5/16" Bore Cylinder
Single Acting Spring Return – 0313S01-00A
Front Nose Mount
1.125 + .750 PER .500 STROKE
Standard Stroke Lengths:
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.250
.359Ø
.375
Maximum Stroke: 4"
Base Weight: .03 lbs., plus .02 lbs. per inch of stroke
.125Ø
ROD
*Optional Accessories:
• M117001 Mounting Bracket
• M127001 Rod Clevis
1/4-28 UNF-2A THREAD
#5-40 UNC-2A THREAD
Double Nose or Rear Pivot Mount
#10-32 UNF-2B THREAD
1.516 + .750 PER .500 STROKE
.344
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.188
.250
Maximum Stroke: 4"
.250
.156
.375
.625Ø
.375Ø
+.000
-.003
.125Ø
ROD
• M117001 Mounting Bracket (with front nose mount)
• M117002 Mounting Bracket (with rear nose mount)
• M129001 Pivot Bracket
1/4-28 UNF-2ATHREAD
.125Ø I.D.BUSHING
3/8-24 UNF-2ATHREAD
#5-40 UNC-2ATHREAD
Single Acting Spring Extend – 0313R01-00A
Front Nose Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
1.484 + 1.250 PER .500 STROKE
.313 + STROKE
.156
.313
.047
.375
Maximum Stroke: 4"
.625Ø
.375Ø +.000
-.003
.125Ø
ROD
#5-40 UNC-2A THREAD
.375
Maximum Stroke: 4"
8
1.875 + 1.250 PER .500 STROKE
.313 + STROKE
.156
.313
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.360Ø
.047
(TYP)
.188
.156
.625Ø
.250
.375Ø (TYP)
+.000
-.003
.125Ø
ROD
#5-40 UNC-2A THREAD
3/8-24 UNF-2A THREAD (TYP)
.125Ø I.D. BUSHING
M
SERIES
5/16" Bore Cylinder
Double Acting – 0313D01-00A
Front Nose Mount
1.641 + STROKE
.469
Standard‑ Stroke Lengths:
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.313
.047
.375
Maximum Stroke: 4"
.375Ø +.000
.625Ø
.360Ø
-.003
.125Ø ROD
#5-40 UNC-2A THREAD
NOTE: CYLINDER SHOWN AT 1" STROKE
2.031 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.047
(TYP)
Maximum Stroke: 4"
.469
.313
.344
.188
.250
.156
.375
.625Ø
.375Ø (TYP)
+.000
.125Ø ROD
-.003
.125Ø I.D.
BUSHING
#5-40 UNC-2A THREAD
5/16" Bore Cylinder Specifications
•
•
•
•
(0.07) X (Air Line Pressure) = Approximate Force Exerted
Enclosed spring force: .5 lbs. retracted, 1 lbs. extended.
Mounting nuts are standard on all nose mount cylinders.
FKM seals are optional on all cylinders for 200° - 350°F applications.
5/16" Bore Accessories
Pivot Mount Bracket
M117001
1.000
M129001
.437
.250.375
.170
.260
.125
.750
.125 R
Ø.126
.125 RADIUS
.063
.438
.340
.500
.313
.130
.094
TYP.
.406
.125
#5-40
UNC-2B
.188
.531
Ø.128
.750
.11
.313
.125
.31 R
Ø.376
M127001
.040
TYP.
.063
Ø.141 THRU
2 PLACES
Rod Clevis
.188
.500
.563
.625
Mounting Nuts
M117001
SINGLE ACTING 5/16" BORE
M117002
1.000
.063
Ø.141 THRU
2 PLACES
.250.375
.750
.125 R
M129001 5/16"
BORE
M190001
.438
HEX
.125
M190002
.562
HEX
.16
.22
.31 R
Ø.376
.063
.438
.750
1/4-28 UNF-2B
.125
M127001 5/16"
BORE
3/8-24 UNF-2B
.500
Information
subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
M117001
M190001
M190002
9
M
SERIES
7/16" Bore Cylinder
Front Nose Mount
1.313 + .938 PER .500 STROKE
.313
Standard Stroke Lengths: 1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.047
Maximum Stroke: 6"
.375
-.003
.188Ø ROD
1.750 + .938 PER .500 STROKE
+.000
-.003
.188Ø ROD
.156Ø PIVOT PIN
#10-32 UNF-2A THREAD
1.938 + 1.438 PER .500 STROKE
.375 + STROKE
.344
.750Ø
.375
.500
.500Ø
.047
.437Ø
+.000
-.003
.188Ø
ROD
2.375 + 1.438 PER .500 STROKE
.375 + STROKE
.375
Standard Stroke Lengths: 1/2", 1", 1-1/2", 2", 2-1/2", 3"
.313
.250
.437Ø
Rear Pivot Mount
.500
.250
-.003
Standard Stroke Lengths: 1/2", 1", 1-1/2", 2", 2-1/2", 3"
Maximum Stroke: 6"
.375Ø +.000
Front Nose Mount
.313
.047
(TYP)
.500
Maximum Stroke: 6"
.750Ø
.438
Maximum Stroke: 6"
Rear Pivot Mount
.500Ø
.375Ø +.000
.188
.500
.500
.047
(TYP)
.344
.250
.500
.250
.313
.437Ø
+.000
-.003
(TYP)
.188Ø
ROD
.156Ø
7/16-20 UNF-2A THREAD (TYP) PIVOT PIN
#10-32 UNF-2A
THREAD
.750Ø
10
M
SERIES
7/16" Bore Cylinder
2.125 + STROKE
Front Nose Mount
.719
.375
.750Ø
.047
.500
#10-32 UNF-2B
THREAD
Maximum Stroke: 12"
.500Ø
.188
.437Ø +.000
.375
-.003
.188Ø
ROD
Rear Pivot Mount
2.563 + STROKE
.719
.438
.375
.047
(TYP)
.500
Maximum Stroke: 12"
.250
.750Ø
.500
.313
.250
+.000
-.003
.188Ø
ROD
.437Ø
(TYP)
.156Ø PIVOT PIN
Double Acting Through Rod
Double Nose Mount – 0438D03-00A
2.812 + 2 TIMES STROKE
.719
(TYP)
.047
(TYP)
Maximum Stroke: 12"
# 10-32
THREAD
• M117003 Nose Mount Bracket
• M190003 Mounting Nut
• M190011 Rod Nut
.188Ø ROD
(TYP)
7/16–20 UNF–2A THREAD (TYP)
#10–32 UNF–2A THREAD (TYP)
1.563 + .938 PER .500 STROKE
.563
.047
.500
Maximum Stroke: 6"
.188
.500Ø
.375Ø
.375
+.000
-.003
.188 HEX ROD
Single Acting Spring Return – 0438N02-00A
Rear Pivot Mount Non-Rotating
2.000 + .938 PER .500 STROKE
.750Ø
.438
.563
.500
Maximum Stroke: 6"
UNF - 2B
+ .000
-.003
.500
(TYP)
.437Ø (TYP)
.780Ø (TYP)
Front Nose Mount Non-Rotating
.375
(TYP)
2.062 + STROKE
.500
.250
.047
(TYP)
.250
.313
.437Ø
+.000
.375Ø +.000
-.003
-.003
.188 HEX ROD
.156Ø PIVOT PIN
11
M
SERIES
•
•
•
•
(0.15) X (Air Line Pressure) = Approximate Force Extended
Enclosed spring force: 1 lbs. retracted, 2 lbs. extended.
Pivot Mount Bracket
M117003
M029002
1.375
.500
.094
.203
TYP.
.375
.500
.688
.500
.281
.281
.203
TYP
.828
.563
.125
TYP.
.125
.094
M117004
.375
.500
.562
.375
.193
.938
.203 R
.563
.063
.500
.750
M029002 7/16" BORE
.875
.563
.766
M127002 7/16"
BORE
.125
.313R
Ø.376
#10-32 UNF-2B
Ø.188
Ø.157
.312
.625
.500
.13
.375
.094
TYP.
.500
1.375
M117003
.063
9/16" BORE
.203
TYP.
.125
.063
Mounting M117004
Nuts
M190002
M190003
.562
HEX
.687
HEX
.22
.25
7/16-20 UNF-2B
3/8-24 UNF-2B
M190002
12
.750
.063
.063
.375R
M127002
.125
TYP.
.203
TYP
.500
Ø.438
Rod Clevis
M190003
M
SERIES
9/16" Bore Cylinder
Front Nose Mount
For bumper option, add .062" to overall length.
1.531 + 1.625 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.375
.500
.063
.437Ø+.000
.188Ø ROD
.500
-.003
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
1.813 + 1.625 PER 1.00 STROKE
.375
.375
Maximum Stroke: 6"
.625Ø
.188
Maximum Stroke: 6"
.500
.625Ø
.250
.063
(TYP)
.313
.188
(TYP)
.437Ø +.000
-.003
.188Ø ROD
.156Ø I.D. BUSHING
Front Nose Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3"
2.000 + 2.625 PER 1.00 STROKE
STROKE
.437Ø+.000
-.003
.188Ø ROD
2.281 + 2.625 PER 1.00 STROKE
STROKE
.375
.375
.500
Maximum Stroke: 6"
1/2", 1", 1-1/2", 2", 2-1/2", 3"
.625Ø
.063
.500
.375
.375
Maximum Stroke: 6"
.250
.063 (TYP)
.188
.625Ø
.313
.437Ø(TYP)
+.000
-.003
.188Ø ROD
#10-32 UNF-2B THREAD (TYP)
.157Ø I.D. BUSHING
13
M
SERIES
9/16" Bore Cylinder
For magnetic band option, add .250" to overall length.
Front Nose Mount
2.281 + STROKE
.750
.375
.500
Maximum Stroke: 12"
.063
.188
.625Ø
.437Ø +.000
.500
-.003
.188Ø ROD
For magnetic band option, add .250" to overall length.
2.563 + STROKE
.750
.375
Maximum Stroke: 12"
.188
.063 (TYP)
.500
.625Ø
.375
.250
.312
.437Ø (TYP)
+.000
-.003
.188Ø ROD
.157Ø I.D. BUSHING
Double Acting Through Rod Double Nose Mount – 0563D03-00A
2.188 + STROKE
Maximum Stroke: 24"
.063
(TYP)
• M190001 Rod Nut
# 10-32
THREAD
+ .000
-.003
#10–32 UNF–2A THREAD (TYP)
1.781 + 1.625 PER 1.00 STROKE
.500
.250
.063
.625Ø
.188
.437Ø+.000
.500
-.003
.188 HEX ROD
.625
2.063 + 1.625 PER 1.00 STROKE
.375
.063 (TYP)
.500
Maximum Stroke: 6"
14
.188Ø ROD
(TYP)
.625
Maximum Stroke: 6"
UNF - 2B
7/16–20 UNF–2A THREAD (TYP)
.500
(TYP)
.437Ø (TYP)
.625Ø (TYP)
.375 (TYP)
.375
(TYP)
.250
.625Ø
.250
.188
.313
.437Ø (TYP)
+.000
-.003
.188 HEX ROD
.156Ø I.D. BUSHING
M
SERIES
9/16" Bore Cylinder
Through Rod
2.188 + STROKE
.063
(TYP)
.375
(TYP)
.375
(TYP)
.500
(TYP)
#10-32 UNF-2B
THREAD
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.625Ø
.437Ø (TYP)
+.000
-.003
Maximum Stroke: 12"
.188Ø ROD
(TYP)
#10-32 UNF-2A THREAD (TYP)
•
•
•
•
•
•
•
•
(0.25) X (Air Line Pressure) = Approximate Force Extended
Bumpers are optional on all 9/16" bore cylinders (except in combination with FKM option).
Bumper option on single acting cylinders adds .062" to overall length.
Bumper option on double acting cylinders adds .125" to overall length.
Magnetic band option on 9/16" bore double acting cylinders adds .250" to overall length.
Nose Mounting Bracket
Pivot Mount Bracket
M117003
M129002
1.375
.500
.094
.203
TYP.
.375
.500
.688
.500
.750
.34
.828
.563
.125
.094
.687
HEX
.25
.938
Ø.157
.063
M190003
.375
.193
.203 R
.125
Mounting Nuts
.562
.500
.094
TYP.
.500
.563
M117003
9/16" BORE
Ø.188
.375
.281
.125
TYP.
#10-32 UNF-2B
.063
.203 TYP
.13
.375
.203
TYP
.063
.375R
M127002
.125
TYP.
.281
.500
Ø.438
Rod Clevis
.750
.766
M127002 7/16"
BORE
M129002 9/16" BORE
7/16-20 UNF-2B
M190003
15
M
SERIES
3/4" Bore Cylinder
Front Nose Mount
For magnet option, add .687 to overall length.
1.500 +1.687 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.438
.500
.813Ø
.188
.094
Maximum Stroke: 6"
.500Ø
.625
+.000
-.003
.250Ø
ROD
Rear Pivot Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
2.281 + 1.687 PER 1.00 STROKE
.750
.344
.094 (TYP)
.500
.875Ø
.625
.438
Maximum Stroke: 6"
1/8" NPTF
.281
.500Ø
.375
.624Ø
+.000
-.003
+.000
-.003
.250Ø
ROD
.250Ø PIVOT PIN
1/8"
NPTF
Front Nose Mount
2.313 + 2.687 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.500 + STROKE
Maximum Stroke: 6"
.094
.500
.813Ø
1/8" NPTF
+.000
-.003
.250Ø
ROD
2.437 + 2.687 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.875Ø
.624Ø
Rear Pivot Mount
Maximum Stroke: 6"
.469
.500
.500 + STROKE
.469
.875Ø
.500
.094
(TYP)
.500
.250Ø
ROD
+.000
-.003
.624Ø
(TYP)
.750
.344
.281
1/8" NPTF
.375
.250Ø PIVOT PIN
16
M
SERIES
3/4" Bore Cylinder
Front Nose Mount
2.969 + STROKE
.969
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6"
.813Ø
.094
.500
Maximum Stroke: 12"
.875Ø
.500
.188
1/8" NPTF
.624Ø
.625
+.000
-.003
.250Ø
ROD
1/8" NPTF
Rear Pivot Mount
3.750 + STROKE
.969
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9" 10", 11", 12"
.750
.344
.094
(TYP)
.500
.875Ø
.625
.500
.281
Maximum Stroke: 32"
.375
.624Ø
(TYP)
+.000
-.003
.250Ø
ROD
1/8" NPTF
.250Ø PIVOT PIN
3.750 + STROKE
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
.969
.625
.500
.500
Maximum Stroke: 32"
.875Ø
.344
.094
(TYP)
.281
(TYP)
.624Ø
+.000
-.003
.250Ø
ROD
1/8" NPTF
1.750 + 1.687 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.251Ø PIVOT HOLE
Maximum Stroke: 6"
.375
.688
.500
.250
.094
.813Ø
.188
.625
.500Ø
+.000
-.003
.25 HEX ROD
1/8" NPTF
17
M
SERIES
3/4" Bore Cylinder
2.531 + 1.687 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.500
Maximum Stroke: 6"
.250
.375
.281
.624Ø
+.000
-.003
-.003
.25 HEX ROD
Through Rod
.250Ø PIVOT PIN
1/8" NPTF
3.000 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.750
.344
.094 (TYP)
.500Ø
+.000
Maximum Stroke: 12"
.875Ø
.625
.688
.469
(TYP)
.094
(TYP)
.500
(TYP)
1/8" NPTF
.500
(TYP)
.875Ø (TYP)
.624Ø
+.000
-.003
.250Ø ROD (TYP)
Front Block Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
Maximum Stroke: 12"
3.219 + STROKE
1.00
SQ.
.625Ø
Trunnion Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.750
18
.250
TAPPED 1/4-20 UNC-2A FROM OPP. SIDE
1/8" NPTF TYP
.625
#10-32 UNF-2B ON
1.00 BOLT CIRCLE
.625
.250Ø
ROD
.188
.218 WRENCH FLAT
3.219 + STROKE
1.00
SQ.
.625
.094
.250
.750
+.000
-.003
Maximum Stroke: 12"
2 HOLES DRILLED & C'BORED
FOR #10-32 SHCS
.094
+.000
-.003
.885
.375
.885
.344
1/8 NPTF (TYP)
1.750
.625
.250 ROD
1/4-28 UNF-2A
THREAD
.188
.500Ø
.218 WRENCH FLAT
M
SERIES
• (0.4) X (Air Line Pressure) = Approximate Force Exerted
• Enclosed spring force: 3 lbs. retracted, 6 lbs. extended.
• Mounting nuts are standard on all nose mount cylinders.
• FKM seals are optional on all cylinders for 200° - 350°F applications.
• Bumpers are optional on all 3/4" bore cylinders (except in combination with FKM option).
• Magnetic piston optional on all double acting 3/4" bore cylinders (except in combination with FKM option).
• Bumper option on 3/4" bore single acting cylinders adds .125" to overall length, but does not affect the
overall length of double acting cylinders.
Pivot Mount Bracket
M117005
M029003
1.875
.125
M127003
.938
.188
TYP.
.750
1.00
.813
.438
.563 R
Ø.626
Ø.251
.500
.125
.750
.750
.500
.266
TYP
.125
.438
.266
TYP
.813
.687
.500
.255
.188
TYP.
1.375
.25
.125
.16
1/4 - 28 UNF-2B
.563
.266
TYP
.813
Rod Clevis
.124
TYP.
.750
1.188
.313 R
Ø.251
M117006
M117005
1.188
.875
11.625
1/16" BORE
.094
.438
.203
TYP
.625
.125
.750
1.125
M029003 3/4" BORE
.625
M129003
.406R
Ø.501
M127003 3/4" BORE
.250
.750
1.094
.188
.688 .094
.813
.188
TYP.
.266
TYP
.438
.38
.125
.125
.438
.266
TYP
.188
TYP.
M117006
Mounting Nuts
.750
.313 R
Ø.251
M190004
.750
HEX
.813
.875
.31
1.188
.250
.125
1.125
M129003 3/4" BORE
1/2-20 UNF-2B
M190005
.938
HEX
M190004
.38
5/8-18 UNF-2B
19
M
SERIES
7/8" Bore Cylinder
Front Nose Mount
1.844 + 1.562 PER 1.00 STROKE
.500
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.094
.500
.938Ø
.188
Maximum Stroke: 6"
.624Ø
.625
+.000
-.003
.250Ø
ROD
Rear Pivot Mount
2.469 + 1.562 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.500
.250Ø
ROD
.375
1/8" NPTF
.250Ø PIVOT PIN
(TYP)
2.313 + 2.562 PER 1.00 STROKE
.500 + STROKE
.469
.938Ø
.500
.094
.500
Maximum Stroke: 6"
.250Ø
ROD
.624Ø
+.000
-.003
1/8" NPTF
Rear Pivot Mount
2.625 + 2.562 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
.75
.281
-.003
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.938Ø
.344
(TYP)
.624Ø
+.000
Front Nose Mount
.625
.094
(TYP)
.500
Maximum Stroke: 6"
1/8" NPTF
.500
.500 + STROKE .469
.500
.094
.250Ø
(TYP)
ROD
.938Ø
.75
.344
.281
.375
.624Ø
+.000
-.003
1/8" NPTF
.250Ø PIVOT PIN
20
M
SERIES
7/8" Bore Cylinder
For bumper and magnet option on 7/8" bore double acting cylinders
adds .125" to overall length.
Front Nose Mount
2.938 + STROKE
.968
.500
Standard Stroke Lengths: 1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6"
.094
.500
.938Ø
.188
1/8" NPTF
Maximum Stroke: 32"
.625
.624Ø
+.000
-.003
.250Ø
ROD
1/8" NPTF
For bumper and magnet option on 7/8" bore double acting cylinders adds
.125" to overall length.
Rear Pivot Mount
3.563 + STROKE
.968
.500
Maximum Stroke: 32"
.281
.344
.094
(TYP)
.500
.938Ø
.625
.375
(TYP)
.624Ø
+.000
-.003
.250Ø
ROD
1/8" NPTF
Through Rod Double Nose Mount
.094
(TYP)
.068
(TYP)
.938Ø (TYP)
.624Ø (TYP)
+ .000
-.003
1/4-28 UNF–2A THREAD (TYP)
For bumper and magnet option on 7/8" bore double acting cylinders adds .125" to overall length.
3.563 + STROKE
.281
.094
(TYP)
.500
.625
.968
.500
Maximum Stroke: 32"
.250Ø ROD
(TYP)
.938Ø
.344
.375
(TYP)
.624Ø
+.000
-.003
.250Ø
ROD
1/8" NPTF
.250Ø PIVOT HOLE
2.094 + 1.562
PER 1.00
STROKE
.750
.500
(TYP)
1/8" NPTF
.500
(TYP)
2.906 + TIMES STROKE
Maximum Stroke: 32"
Maximum Stroke: 6"
.250Ø PIVOT PIN
• M190001 Rod Nut
.750
.500
.250
.094
.938Ø
.188
.624Ø
.625
+.000
-.003
5/8-18 UNF-2A
THREAD
.25 HEX ROD
1/4-28 UNF-2A
THREAD
1/8" NPTF
21
M
SERIES
7/8" Bore Cylinder
2.094 + 1.562
PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.938Ø
.625
.750
.250
.500
Maximum Stroke: 6"
.750
.281
.094
.344
.375
(TYP)
.624Ø
+.000
-.003
1/8" NPTF
.250Ø PIVOT PIN
•
•
•
•
•
•
•
Bumpers are optional on all 7/8" bore cylinders (except in combination with FKM option).
Magnetic piston optional on all double acting 7/8" bore cylinders (except in combination with FKM option).
Bumper and magnet option on 7/8" bore double acting cylinders adds .125" to overall length.
M117005
M029003
1.875
M127003
.938
.188
TYP.
.750
.125
.16
1/4 - 28 UNF-2B
.563
.266
TYP
Rod Clevis
Pivot Mount Bracket
1.00
.813
.266
TYP
.125
.438
.500
Ø.251
.125
.500
.750
.750
.563 R
Ø.626
.438
.266
TYP
.813
.687
.188
TYP.
.813
.124
TYP.
.313 R
1.375
Ø.251
.25
.125
.500
.255
.750
1.188
1.188
.875
.250
M117005
1 1/16" BORE
.125
Mounting Nuts
M129003
M029003 3/4" BORE
.750
M190005
.938
HEX
M127003 3/4" BORE
1.125
.38
.813
.188
TYP.
.266
TYP
.438
.38
.125
.125
.438
.266
TYP
.188
TYP.
5/8-18 UNF-2B
.813
.750
.313 R
Ø.251
.875
M190005
1.188
.250
.125
1.125
22
M129003 3/4" BORE
M
SERIES
Front Nose Mount
1.938 + 1.562 PER 1.00
STROKE
.500
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.094
.125
Maximum Stroke: 6"
.624Ø
.313Ø ROD
+.000
.875
-.003
2.531 + 1.562 PER 1.00
STROKE
.500
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.625
.094
.125
Maximum Stroke: 6"
1/8" NPTF
.250 WRENCH FLATS
Rear Pivot Mount
1.125Ø
.188
.500
.344
(TYP)
1.125Ø
.281
.500
.624Ø
+.000
(TYP) .313Ø ROD
-.003
.250Ø PIVOT PIN
1/8" NPTF
.375
.750
(TYP)
.250 WRENCH FLATS
Front Nose Mount
2.500 + 2.812 PER 1.00 STROKE
.500 + STRK
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.563
Maximum Stroke: 6"
.125
.094
1.125Ø
1/8" NPTF
.500
.500
.313Ø ROD
.624Ø
+.000
-.003
.250 WRENCH FLATS
Rear Pivot Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
2.656 + 2.812 PER 1.00
STROKE
.500 + STRK
.563
Maximum Stroke: 6"
.125
.344
.094
(TYP)
.500
.500
.281
1.125Ø
.750
.313Ø ROD
.624Ø
+.000
-.003
1/8" NPTF
.250Ø PIVOT PIN
.375
.250 WRENCH FLATS
23
M
SERIES
Front Nose Mount
3.250 + STROKE
1.188
.625
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6"
.094
.125
Maximum Stroke: 12"
1/8"
NPTF
.500
.624Ø +.000 .313Ø ROD
.875
-.003
3.844 + STROKE
1.188
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
.094
(TYP)
.125
-.003
.375
.250 WRENCH FLATS
3.844 + STROKE
1.188
.625
.625
.094
(TYP)
.125
1.125Ø
.281
.344
.500
(TYP)
.624Ø +.000 .313Ø ROD
-.003
1/8 NPTF
.251Ø
PIVOT HOLE
.375
.250 WRENCH FLATS
2.188 + 1.562 PER 1.00 STROKE
.750
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
24
.250Ø
PIVOT PIN
1/8" NPTF
.750
.624Ø +.000 .313Ø ROD
1.125Ø
.344
.500
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
Maximum Stroke: 6"
.281
(TYP)
.625
.625
* M117005 Mounting Bracket
Maximum Stroke: 32"
1/8" NPTF
.250 WRENCH FLATS
Rear Pivot Mount
Maximum Stroke: 32"
1.125Ø
.188
.094
.250
1.125Ø
.188
.500
.624Ø +.000
.875
-.003
.375 HEX ROD
1/8" NPTF
M
SERIES
2.781 + 1.562 PER 1.00 STROKE
.625
.500
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.094
(TYP)
.125
Maximum Stroke: 6"
.344
1.125Ø
.281
.500
(TYP)
.624Ø+.000
-.003
.250Ø PIVOT PIN
1/8" NPTF
.375
.750
(TYP)
.375 HEX ROD
Through Rod
3.156 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.094
(TYP)
Maximum Stroke: 12"
1/8"
NPTF
.625
.563
(TYP)
.500
(TYP)
1.125Ø .624Ø(TYP)
+.000
.313Ø ROD (TYP)
-.003
.250 WRENCH
FLATS (TYP)
NOTE: FOR D13 MOUNTING STYLE, SUBTRACT .406
FROM THE D03 BASE.
Double Acting – 1062DH3-00A
Through Rod Hollow Rod
NOTE: FOR MAGNET OPTION, ADD .406 TO OVERALL LENGTH.
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
2.750 + STROKE
Maximum Stroke: 12"
.625
(TYP)
.500
(TYP)
(TYP)
1.125Ø .624Ø +.000
.313Ø ROD (TYP)
-.003
.160Ø THRU
.125
(TYP)
5/16-24 UNF-2A
THREAD (TYP)
.250 WRENCH FLATS (TYP)
Front Block Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.563
1/8 NPTF
.094
(TYP)
Maximum Stroke: 12"
5/16-24 UNF-2A
THREAD (TYP)
.125
(TYP)
3.750 + STROKE
.468
1.156
.625
1.25
SQ.
.094
.749Ø
.250
+.000
-.003
.750
1/8" NPTF
TYP
.812 .313Ø ROD
#10-32 UNF-2B ON
1.25 BOLT CIRCLE
.875
.188
2 HOLES DRILLED &
C'BORED FOR #10-32 SHCS
TAPPED 1/4-20 UNC-2A FROM OPP. SIDE
.250 WRENCH FLAT
25
M
SERIES
Bore Double Acting – 1062D06-00A
Trunnion Mount
3.750 + STROKE
.468
1.156
1.25
SQ.
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.625
.094
.250
.749Ø
+.000
-.003
Maximum Stroke: 12"
1/8 NPTF
(TYP)
.750
2.000
.313Ø ROD
.875
5/16-24 UNF-2A
THREAD
.188
.500Ø
.250 WRENCH FLAT
1-1/16" Bore Cylinder Specifications
•
•
•
•
•
•
•
•
NOTE: CYLINDER SHOWN
AT 1" STROKE
Enclosed spring force: 3 lbs. retracted, 6 lbs. extended. Note that R01 and R02 is 6 lbs. retracted, 12 lbs. extended.
Bumpers are optional on all 1-1/16" bore cylinders (except in combination with FKM option).
Magnetic piston optional on all double acting 1-1/16" bore cylinders (except in combination with FKM option).
Magnetic piston option on DH3 mount adds .406 to overall length. For D03 Mount, add 0.25" to overall length.
1-1/16" Bore Accessories
Pivot Mount Bracket
M117005
Rod Clevis
M029003
.750
1.875
.125
.563
.266
TYP
1.00
.813
.938
.19
5/16 - 24 UNF-2B
.266
TYP
.125
.438
M127004
.188
TYP.
.500
Ø.251
.125
.438
.266
TYP
.563 R
Ø.626
.813
.500
.750
.750
.813
.255
.750
.124
TYP.
.313 R
1.375
Ø.251
.25
.125
.500
.687
.188
TYP.
1.188
1.188
.875
.250
M117005
1 1/16" BORE
Mounting Nuts
1.125
M129003
M029003 3/4" BORE
M190005
.938
HEX
M127004 1 1/16"
BORE
.125
.38
.750
.813
.188
TYP.
.266
TYP
.438
.38
.125
.125
.438
.266
TYP
5/8-18 UNF-2B
.188
TYP.
.813
.750
.313 R
Ø.251
.875
M190005
1.188
.250
.125
1.125
26
M129003 3/4" BORE
M
SERIES
Front Nose Mount
2.656 + 1.812 PER 1.00 STROKE
.750
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4"
.875
.094
.250
Maximum Stroke: 6"
.875
.749Ø+.000.438Ø ROD
-.003
.375 WRENCH FLATS
3.375 + 1.812 PER 1.00 STROKE
.750
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4"
.781
.875
Maximum Stroke: 6"
.250
.094
(TYP)
.251Ø PIVOT HOLE
.500
3.469 + 2.812 PER 1.00 STROKE
.750 .875 + STK .750
.625
.094
Maximum Stroke: 6"
.250
1.344Ø
1/8" NPTF
.749Ø .438Ø ROD
+.000
.375 WRENCH FLATS
3.781 + 2.812 PER 1.00 STROKE
.750 .875 + STK .750
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4"
.625
Maximum Stroke: 6"
+.000
-.003
(TYP)
.375 WRENCH FLATS
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4"
.749Ø
.406
1/8" NPTF
Front Nose Mount
1.344Ø
.406
.438Ø ROD
1/8" NPTF
1.344Ø
.250
.250
.44
.094
(TYP)
.38
1.344Ø
.749 +.000 .438Ø ROD
-.003
.251Ø
PIVOT HOLE
1/8" NPTF
.375 WRENCH FLATS
.500
27
M
SERIES
For bumpers and magnetic band option add .125" to overall length.
Front Nose Mount
4.000 + STROKE
.750
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
Maximum Stroke: 12"
1.625
.875
.094
1.344Ø
1/8" NPTF
.749Ø+.000 .438Ø ROD
.875
-.003
1/8" NPTF
.375 WRENCH FLATS
For bumpers and magnetic band option add .125" to overall length.
4.719 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
.750
Maximum Stroke: 32"
.250
.250
.250
1.625
.781
.875
1.344Ø
.406
.094
(TYP)
.749Ø
+.000
-.003
.406
(TYP)
.438Ø ROD
.251Ø
PIVOT HOLE
1/8" NPTF
.500
.375 WRENCH FLATS
2.656 + 1.812 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.875
1.344Ø
.094
.250
Maximum Stroke: 6"
.250
.875
.749Ø+.000
.875
-.003
1/8" NPTF
.438 HEX ROD
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
3.375 + 1.812 PER 1.00 STROKE
.781
.875
.875
.250
.406
.094
(TYP)
1.344Ø
(TYP)
.406
.749Ø
+.000
-.003
1/8" NPTF
.251Ø
PIVOT HOLE
.438 HEX ROD
28
.500
M
SERIES
Through Rod
.875
3.813 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.750
(TYP)
.094
(TYP)
.750
(TYP)
1/8" NPTF
(TYP)
1.344Ø
.749Ø +.000
-.003
Maximum Stroke: 12"
.438Ø ROD (TYP)
7/16-20 UNF-2A
THREAD
.250
(TYP)
(TYP)
3.813 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.094
(TYP)
1/8 NPTF
.875
.750
(TYP)
.750
(TYP)
1.344Ø
(TYP)
.749Ø +.000
-.003
Maximum Stroke: 12"
.438Ø ROD (TYP)
.250Ø THRU
7/16-20 UNF-2A
THREAD
.250
(TYP)
(TYP)
•
•
•
•
•
•
•
Enclosed spring force: 7.5 lbs. retracted, 15 lbs. extended.
Bumper and magnet option on 1-1/4" bore double acting cylinders adds .125" to overall length.
M117007
2.50
.125
.750
.75
.281
TYP
1.50
.938
.813
1.75
.625
.42
.50
7/16 - 20 UNF-2B
.750
Ø.376
.125
.750
.813
1.031
.750
.380
.750
.313 R
.187
TYP.
1.688
Ø.251
1.188
.875
.250
.125
3/4-16 UNF-2B
.25
.438
.266
TYP
.188
TYP.
Mounting Nuts
M117007
M190006
1 1/2" BORE
1.125
HEX
1.313
.266
TYP
.125
.125
M127005
.188
TYP.
.438
.938
Rod Clevis
.750R
Ø.751
1.00
Pivot Mount Bracket
M229003
M127005 1 1/4"
BORE
1.125
M229003 1 1/4" BORE
29
M
SERIES
2.438 + 1.687 PER 1.00
STROKE
Front Nose Mount
.750
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.250
Maximum Stroke: 6"
.875
.094
.749Ø +.000
1.563Ø
.250
.438Ø ROD
.875
-.003
1/8" NPTF
.375 WRENCH FLATS
Rear Pivot Mount
3.125 + 1.687 PER 1.00 STROKE
.750
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
1.563Ø
.250
+.000
-.003
1/8" NPTF
(TYP)
3.188 + 3.000 PER 1.00 STROKE
1.250
Maximum Stroke: 6"
.875 + STK .625
.625
.094
1.563Ø
1/8" NPTF
.250
.749Ø .438Ø ROD
+.000
-.003
.375 WRENCH FLATS
Rear Pivot Mount
3.875 + 3.000 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
1.250
Maximum Stroke: 6"
.375Ø PIVOT
PIN
.375 WRENCH FLATS
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.625
.375
(TYP)
.438Ø ROD
.749Ø
Front Nose Mount
1.00
.500
.094
(TYP)
.813
.875
.875 + STK .625
.625
.094
(TYP)
.250
1.563Ø
1.00
.500
.375
.625
(TYP)
.749Ø .438Ø ROD
+.000
-.003
1/8" NPTF
.375Ø PIVOT PIN
(TYP)
.375 WRENCH FLATS
30
M
SERIES
For bumper and magnetic band option add .250" to overall length.
Front Nose Mount
3.688 + STROKE
.875
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
Maximum Stroke: 12"
1.500
.750
.094
.749Ø
+.000
-.003
1.563Ø
.250
1/8" NPTF
.250
.438Ø ROD
.875
1/8" NPTF
.375 WRENCH FLATS
Rear Pivot Mount
4.375 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
.250
Maximum Stroke: 32"
1.500
.750
.749Ø
+.000
-.003
1/8" NPTF
4.750 + STROKE
1.500
.750
.250
.875
.094
(TYP)
1.172
1.563Ø
.875
(TYP)
.749Ø
.438Ø ROD
+.000
-.003
1/8" NPTF
.375 WRENCH FLATS
2.563 + 1.687 PER 1.00 STROKE
.875
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
1.000
.094
.375
Maximum Stroke: 6"
.375Ø PIVOT PIN
.375 WRENCH FLATS
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
.625
.375
Double Nose Mount
1.00
.500
.438Ø ROD
Maximum Stroke: 32"
1.563Ø
.797
.875
.094
(TYP)
1.563Ø
.250
.875
.749Ø+.000
-.003
1/8" NPTF
.438 HEX ROD
31
M
SERIES
3.250 + 1.687 PER 1.00 STROKE
.875
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.375
1.563Ø
.813
1.000
-.003
1/8" NPTF
.437 HEX ROD
.625
(TYP)
.094
(TYP)
Maximum Stroke: 12"
1.562Ø
.749Ø
(TYP)
+.000
.438Ø ROD (TYP)
-.003
3.375 + STROKE
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5", 6"
.094
(TYP)
1/8 NPTF
32
.750
(TYP)
.438Ø ROD (TYP)
+.000
-.003
.250Ø THRU
7/16-20 UNF-2A
THREAD
.250
(TYP)
(TYP)
.375 WRENCH FLATS
(TYP)
4.188 + STROKE
.375
1.75
SQ.
.999Ø
.125
+.000
-.003
1.250
Maximum Stroke: 12"
.875
.625
(TYP)
1.562Ø
.749Ø (TYP)
Front Block Mount
7/16-20 UNF-2A
THREAD
.250
(TYP)
(TYP)
.375 WRENCH FLATS
(TYP)
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.750
(TYP)
1/8" NPTF
.875
3.375 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
Base Weight: 1.16 lbs., plus .13 lbs. per inch of stroke
.375Ø PIVOT PIN
Through Rod
Maximum Stroke: 12"
.625
.375
(TYP)
.749Ø+.000
Maximum Stroke: 6"
1.00
.500
.094
(TYP)
1.531
.875
2 HOLES DRILLED &
C'BORED FOR 1/4 SHCS
TAPPED 5/16-18 FROM
OPP. SIDE
1/8" NPTF TYP
.438Ø ROD
1.125
1/4-20 UNC-2B ON 1.75 BOLT CIRCLE
.875
.375 WRENCH FLAT
.250
M
SERIES
Trunnion Mount
4.188 + STROKE
1.75
SQ.
.999Ø
+.000
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.375
1.531
.937
.125
-.003
1/8 NPTF
(TYP)
1.250
Maximum Stroke: 12"
2.500
.438Ø ROD
.875
7/16-20 UNF-2A
THREAD
.250
.500Ø
.375 WRENCH FLAT
•
•
•
•
•
•
•
Enclosed spring force: 7 lbs. retracted, 14 lbs. extended. Note that R01 and R02 is 9 lbs. retracted, 17 lbs. extended.
Bumper and magnet option on 1-1/2" bore double acting cylinder adds .250" to overall length.
Pivot Mount Bracket
M117007
2.50
Rod Clevis
M029004
1.000
.125
.75
.281
TYP
1.50
M127005
1.313
.250
TYP.
.25
.266
TYP
1.000
.625
Ø.376
.125
.938
1.00
.625
.266
TYP
.750R
Ø.751
.750
.125
.938
.250
TYP.
1.75
1.000
1.031
.750
.380
1.000
.187
TYP.
.375 R
.625
.125
7/16 - 20 UNF-2B
.750
1.688
Ø.376
1.750
1.375
M117007
1 1/2" BORE
M127005 1 1/4"
BORE
.250
.125
1.500
Mounting Nuts
M029006
1.00
M190006
1.125
HEX
.25
TYP.
.42
.266
TYP
1.125
.688
.250
.250
.250
.266
TYP
3/4-16 UNF-2B
.25
TYP.
.688
1.125
1.00
.375 R
Ø.500
M190006
1.375
1.750
.375
.250
1.500
33
M
SERIES
Front Nose Mount
2.969 + 2.000 PER 1.00 STROKE
.750
.313
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
1.250
.500Ø ROD
1.031Ø
+.000
-.003
4.031 + 2.000 PER 1.00 STROKE
.313
1/2", 1", 1-1/2" 2", 2-1/2", 3", 4"
+.000
-.003
4.031 + 3.000 PER 1.00 STROKE
1.063 + STROKE
.875
.313
.750
34
1.844Ø
.094
.875
1/4" NPTF
1.031Ø
+.000
-.003
.500Ø ROD
1-14 UNS-2A THREAD
.438 WRENCH FLATS
4.688 + STROKE
1.938
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
.376Ø PIVOT HOLE
1/4" NPTF
1-14 UNS-2A THREAD (TYP)
.438 WRENCH FLATS
Front Nose Mount
Maximum Stroke: 12"
.625
.500
(TYP)
1.031Ø .500Ø ROD
Maximum Stroke: 6"
1.844Ø
.500
.094
(TYP)
.875
Front Nose Mount
1.125
.750
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
1/4" NPTF
1-14 UNS-2A THREAD
.438 WRENCH FLATS
Maximum Stroke: 6"
1.844Ø
.250
.094
.875
.750
.313
.875
.094
1/4" NPTF
.500Ø ROD
1.031Ø
+.000
.250
1.844Ø
1.250
-.003
1-14 UNS-2A THREAD
1/4" NPTF
.438 WRENCH FLATS
M
SERIES
5.750 + STROKE
1.938
.750
Standard Stroke Lengths: 1/2", 1", 1-1/2" 2", 2-1/2", 3",
4", 5", 6", 7", 8", 9", 10", 11", 12"
Maximum Stroke: 32"
1.031Ø
+.000
1.125
.313
.875
1.844Ø
.500
-.003
(TYP)
.625
.500
.094
(TYP)
.500Ø ROD
1/4" NPTF
.375Ø PIVOT HOLE
1-14 UNS-2A THREAD (TYP)
.438 WRENCH FLATS
Double Acting Double Nose Mount – 1750D03-00A
Standard Stroke Lengths: 1/2", 1", 1-1/2" 2", 2-1/2", 3", 4", 5",
6", 7", 8", 9", 10", 11", 12"
.750
(TYP)
Maximum Stroke: 32"
• M190004 Rod Nut
.313
(TYP)
.875
(TYP)
4.437 + TIMES STROKE
1.938
(TYP)
1/4" NPTF
.094
(TYP)
1.844Ø (TYP) 1.031Ø (TYP)
+ .000
-.003
.500Ø ROD
(TYP)
1-14 UNF–2A THREAD (TYP)
•
•
•
•
•
•
Pivot Mount Bracket
M117008
3.000
Rod Clevis
M129005
1.000
.188
M127006
.250
TYP.
1.313
.31
.875
1/2 - 20 UNF-2B
1.50
.344
.266
TYP
1.125
.906R
Ø1.032
1.25
.688
1.125
1.125
.188
.265/.235
.750
.688
.266
TYP
1.125
1.031
.750
.380
.250
TYP.
Mounting Nuts
M117008
M190008
1 3/4"
BORE
1.500
HEX
Ø.376
.625
.265/.235
2.125
.75
.750
.187
TYP.
1.000
1.688
.375 R
Ø.376
.55
1.750
1.375
.375
.265/.235
1.500
M127006 1 3/4"
BORE
1-14 UNF-2B
M190008
35
M
SERIES
2" Bore Cylinder
Front Nose Mount
.875 1.188
.125
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 4"
1.0 STROKE=5.406
2.0 STROKE=7.406
3.0 STROKE=8.656
4.0 STROKE=11.593
2.078Ø
.313
.375
1.375Ø
+.000
-.003
.625Ø
ROD
1.250
1 1/4-12 UNF-2A THREAD
1.00 STROKE=6.344
2.00 STROKE=8.344
3.00 STROKE=9.594
4.00 STROKE=12.531
.875 1.188
.125
1/4 NPTF
(TYP)
.375
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 4"
1/4 NPTF
.500 WRENCH FLATS
1.031
2.078Ø
.750
.563
.438
(TYP)
.625Ø
1.375Ø
ROD
+.000
-.003
1 1/4-12 UNF-2A THREAD (TYP)
.375Ø I.D.
BUSHING
.500 WRENCH FLATS
Front Nose Mount
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.875
Maximum Stroke: 4"
.375
1.188 +
STROKE .734
.813
1.00 STROKE=7.109
2.00 STROKE=10.109
3.00 STROKE=12.344
4.00 STROKE=16.344
.125
2.078Ø
1/4 NPTF
.625Ø
1.375Ø
ROD
+.000
-.003
.500 WRENCH FLATS
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.875
Maximum Stroke: 4"
.375
36
1.188 +
STROKE
.7
.813 3
4
1.0 STROKE=8.047
2.0 STROKE=11.047
3.0 STROKE=13.281
4.0 STROKE=17.281
.125 (TYP)
.563
.438
2.078Ø
.750
(TYP)
1.375Ø .625Ø
ROD
+.000
-.003
1/4 NPTF
.500 WRENCH FLATS
.375Ø I.D.
BUSHING
M
SERIES
2" Bore Cylinder
For bumper option, add .250 to overall length.
Front Nose Mount
4.688 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7", 8"
Maximum Stroke: 12"
.875
1.922
1.188
.125
2.078Ø
.313
1.375Ø .625Ø
ROD
+.000
1.250
-.003
.500 WRENCH FLATS
1/4 NPTF
For bumper option, add .250 to overall length.
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
Maximum Stroke: 32"
1/4 NPTF
.375
5.625 + STROKE
1.922
.875 1.188
.125
(TYP)
.375
2.078Ø
1.375Ø
1.031
.563
.438
.625Ø ROD
Through Rod
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.375Ø I.D.
BUSHING
1/4 NPTF
.500 WRENCH FLATS
Maximum Stroke: 12"
+.000
+.003
(TYP)
.750
.875
(TYP)
.813
(TYP)
.375
(TYP)
4.188 + STROKE
.734
1/4 NPTF
.734 1.188
.625Ø ROD
(TYP)
1/2-20 UNF-2A
THREAD (TYP)
.500 WRENCH
FLATS (TYP)
1 1/4-12 UNF-2A
THREAD (TYP)
1.375Ø
2.078Ø
(TYP)
+.000
+.003
.125
(TYP)
2" Bore Cylinder Specifications
•
•
•
•
•
•
•
•
Bumpers are optional on all 2" bore cylinders (except in combination with FKM option).
Magnetic piston optional on all double acting 2" bore cylinders (except in combination with FKM option).
Bumper option on single acting spring extend cylinders adds .125" to overall length.
Bumper option on all double acting cylinders adds .250 to overall length.
37
M
SERIES
2" Bore Accessories
Pivot Mount Bracket
M117009
M229005
1.000
3.125
.250
.688
1.500
.265/.235
.688
.266
TYP
2.50
.750
1.125
1.031
.750
.380
.250
TYP.
.625
.750
Ø.376
.75
.265/.235
1.00 R
.250
.31
.266
TYP
1.125
1.125
Ø1.376
1.313
1/2 - 20 UNF-2B
1.625
1.125
M127006
.250
TYP.
1.000
.344
Rod Clevis
.187
TYP.
1.000
1.688
.375 R
Ø.376
M117009
Mounting 2"
Nuts
BORE
1.375
.375
M190009
1.875
HEX
1.750
.265/.235
.50
1.500
M127006 1 3/4"
BORE
1 1/4-12 UNF-2B
M190009
38
M
SERIES
Front Nose Mount
4.688 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
.875
1.840
1.188
.125
.375
Maximum Stroke: 12"
1/4" NPTF
2.625Ø
.313
1.500Ø .625Ø
+.000
ROD
-.003
1.750
1/4 NPTF
.500 WRENCH FLATS
Rear Pivot Mount
5.625 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
1.840
.875 1.188
.125
(TYP)
.375
Maximum Stroke: 32"
1.031
2.625Ø
1/4" NPTF
.437
1.500Ø
.625Ø
+.000
ROD
-.003
(TYP)
.500 WRENCH FLATS
.750
.376Ø I.D.
PIVOT BUSHING
• (5.0) X (Air Line Pressure) = Approximate Force Exerted
• Type 303 stainless steel rod as standard.
• FKM seals are optional on all cylinders for 200° - 350°F applications.
• Magnetic piston optional on all 2-1/2" bore cylinders.
• Bumper option on all 2-1/2" bore cylinders adds .063" to overall length.
NOTE: Consult factory for 2-1/2" bore D03 mount information.
Pivot Mount Bracket
M117010
3.750
Rod Clevis
M229005
1.000
.250
M127006
1.313
.250
TYP.
.31
1/2 - 20 UNF-2B
1.00
1.625
.344
.266
TYP
1.125
.688
1.44
Ø.376
1.44
Ø1.501
.75
.265/.235
1.250R
.265/.235
.688
.266
TYP
1.750
.750
.250
TYP.
.750
1.125
1.031
.750
.380
3.000
.250
.750
.187
TYP.
1.000
1.688
.375 R
Mounting Nuts
Ø.376
M1170010
M190012
21.875
1/2" BORE
HEX
1.375
.50
1.750
.375
.265/.235
1.500
M127006 1 3/4"
BORE
1 3/8-12 UNF-2B
M190012
39
M
SERIES
3" Bore Cylinder
Front Nose Mount
5.250 + STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
1.250
2.094
1.375
.188
Maximum Stroke: 12"
1.625Ø .750Ø
ROD
+.000
-.003
2.00
3/8 NPTF
.625 WRENCH FLATS
5/8-18UNF-2A THREAD
6.500 PLUS STROKE
2.094
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
1.312
.188
(TYP.)
.375
1.375
1.250
Maximum Stroke: 32"
3.156Ø
.875
.813
.625
1.625Ø+.000(TYP.) .750Ø ROD
-.003
.501Ø I.D.
PIVOT BUSHING
1 1/2-12 UNF-2A THREAD (TYP.)
3/8 NPTF
3" Bore Cylinder Specifications
•
•
•
•
•
3.156Ø
.313
3/8 NPTF
.375
.625 WRENCH FLAT
Type 303 stainless steel rod as standard.
Magnetic piston optional on all 3" bore cylinders.
Bumper option on all 3" bore cylinders adds .063" to overall length.
3" Bore Accessories
M117011
4.375
Pivot Mount Bracket
Rod Clevis
M229006
1.250
.250
M127007
2.250
.250
TYP.
.38
1.000
5/8 - 18 UNF-2B
1.625
.344
.266
TYP
1.500
.875
1.750
Ø.501
1.750
.88
.265/.235
1.250R
Ø1.626
.265/.235
1.500
.250
TYP.
.250
TYP.
1.250
.500 R
Mounting Nuts
2.750
Ø.501
M190013
M1170011
3" BORE
2.25
HEX
1.000
1.281
.505
3.140
.890
.250
1.250
.875
.266
TYP
1.890
1.000
.50
1.750
2.250
.500
.265/.235
1.750
M127007 3" BORE
1 1/2-12 UNF-2B
40
M229006 3" BORE
M
SERIES
Adjustable Cushion Cylinders
3/4" Bore Double Acting – 0750DG1-00A
Front Nose Mount with Cushions
.50
3.406 + STROKE
.96
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.50
Ø1.05
.09
.28
Maximum Stroke: 12"
Ø.624
.621
Ø.250
ROD
1/8 NPTF (TYP)
5/8 - 18 UNF-2A THREADS
3/4" Bore Double Acting – 0750DG2-00A
Rear Pivot Mount with Cushions
.50
3.750 + STROKE
.63
.96
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.09
.28
Maximum Stroke: 12"
.37
Ø.624
.621
Ø.250
ROD
3.500 + STROKE
1.188
.625
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.75
Ø.25 PIVOT PIN
1/8 NPTF (TYP)
1-1/16" Bore Double Acting – 1062DG1-00A
Maximum Stroke: 12"
Ø1.05
.34
.50
.094
.125
.281
1.125Ø
.500
.624Ø
.313Ø ROD
+.000
-.003
1/8 NPTF
.250 WRENCH FLATS
1/2", 1", 1-1/2", 2", 2-1/2", 3" with magnet, 4", 5",
6," 7", 8", 9", 10", 11", 12"
Maximum Stroke: 32"
3.844 + STROKE
1.188
.625
.125
.500
.625
.094
(TYP)
.281
.344
(TYP)
.624Ø
.313Ø ROD
+.000
-.003
.375
1/8 NPTF
.750
1.125Ø
.250Ø
PIVOT PIN
.250 WRENCH FLATS
Adjustable Cushion Cylinder Specifications
• Refer to specific bore size in standard cylinder section for specifications.
* See page 51-58 for accessory details.
41
M
SERIES
Adjustable Cushion Cylinders
Available Stroke Lengths:
1/2", 1", 1-1/2", 2", 2-1/2", *3", *4", *5", *6",
*7", *8", *9", *10", *11", *12"
*with magnet
3.875 + STROKE
.750
.438Ø ROD
1.500
.875
.094
.749Ø
+.000
-.003
Maximum Stroke: 12"
1/8 NPTF
.375 WRENCH FLATS
.750
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 7",
8", 9", 10", 11", 12"
Maximum Stroke: 32"
.250
4.375 + STROKE
1.500
.875
.094
1.563Ø
1.000 .625
(TYP)
1/8 NPTF
.375 WRENCH FLATS
2" Bore Double Acting – 2000DG1-00A
5.063 + STROKE
Maximum Stroke: 12"
.469
1/4 NPTF
.500 WRENCH FLATS
2" Bore Double Acting – 2000DG2-00A
.88
5.625
1.55
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
1.19
.13
1.03
Ø2.08
.56
Maximum Stroke: 32"
42
2.078Ø
.625Ø ROD
.375Ø
PIVOT PIN
1.922
.875 1.188
.125
.375
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6"
.500
.375
+.000
-.003
.813
.749Ø .438Ø ROD
1.563Ø
.297
.250
.44
Ø1.375
Ø.625
ROD
1/4 NPTF (TYP.)
Ø.375 PIVOT
BUSHING
.75
1 1/4 - 12 UNF-2A THREADS
.5 ACROSS WRENCH FLATS
Volume Chambers
M
SERIES
Volume Chambers
A + LENGTH
B
D
B
C
E (BOTH ENDS)
Bore
A
B
C
D
E
Cubic Inches
Per Inch
Standard Length
Maximum
Length
3/4"
1.062
0.190
0.625
0.813
1/8"
0.440
1" Increments to 4"
32"
1-1/16"
1.188
0.190
0.875
1.125
1/8"
0.886
1" Increments to 8"
32"
1-1/2"
1.375
0.250
0.875
1.563
1/8"
1.767
1" Increments to 16"
32"
2"
1.767
0.310
1.250
2.078
1/4"
3.141
32"
2-1/2"
1.767
0.310
1.750
2.625
1/4"
4.908
32"
3"
2.000
0.310
2.00
3.156
3/8"
7.069
32"
How To Order
Bore
0313
0438
0563
0750
0875
1062
1250
1500
1750
2000
2500
3000
=
=
=
=
=
=
=
=
=
=
=
=
1500
5/16"
7/16"
9/16"
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
Style
V
= Volume Chamber
Mount
01
= Nose Mount
02
= Pivot Mount
Volume Chamber Specifications
V
01 - 01
A
Fractional Inches of Length
A
= 0" Stroke
B
= 1/16" Stroke
C
= 1/8" Stroke
D
= 3/16" Stroke
E
= 1/4" Stroke
F
= 5/16" Stroke
G
= 3/8" Stroke
H
= 7/16" Stroke
I
= 1/2" Stroke
J
= 9/16" Stroke
K
= 5/8" Stroke
L
= 11/16" Stroke
M = 3/4" Stroke
N
= 13/16" Stroke
O
= 7/8" Stroke
P
= 15/16" Stroke
Full Inches of Length
00 = 0"
01 = 1"
02 = 2"
03 = 3"
32 = 32" (maximum)
• Type 304 stainless steel body.
• Aluminum alloy end caps.
• Pressure rating: 250 psi.
43
M
SERIES
Multi-Position Cylinder
Step 1
The total stroke from full retract to the intermediate position is achieved by
pressurizing port 4.
1
2
4
Features
The M Series Multi-Position is a three-position stainless steel body cylinder with numerous application
advantages. It provides three positions with a single
cylinder.
Step 2
The total stroke from the intermediate position to full extend is achieved by
pressurizing port 2 with port 1 vented.
1
2
4
Step 3
The total stroke from full extend to the intermediate position is achieved by
pressurizing ports 1 and 4 with port 2 vented.
1
2
4
Step 4
The total stroke from full extend to full retract is achieved by pressurizing
port 1 with ports 2 and 4 vented.
1
2
4
How To Order
1500
Bore
0750
1062
1500
2000
=
=
=
=
D1 - 02A - 01A - 00
3/4"
1-1/16"
1-1/2"
2"
Mount
D1
= Nose Mount
Example: 1500D1-02A-01A-00
When port 4 is pressurized, the cylinder will stroke 1". When
port 2 is pressurized, the cylinder will stroke an additional 1"
for a total stroke of 2".
44
Options
00 = No Options
12 = Magnetic Band (Both Ends)
(or leave blank)
Rear Stroke
Front Stroke
(total stroke)
Full Inches
00 = 0"
01 = 1"
02 = 2"
Fractional Inches
A = 0"
I
= 1/2"
For rear strokes of over 8" and/or combined
strokes over 24", consult factory.
M
SERIES
Multi-Position Cylinder
3/4" Bore Standard – 0750D1-00A-00A-00
3/4" Bore Magnetic Band (both ends) – 0750D1-00A-00A-12
Front Nose Mount
Maximum Stroke: 24"
.500
5.406 + STROKE OF CYL. 1 + CYL. 2
3.000 + STROKE OF CYL. 1
.969
.500
.094
1/8 NPTF
.624Ø
CYL. 1
+.000
-.003
.250Ø
ROD
.188
.875Ø
.815Ø
.625
CYL. 2
1/8 NPTF
.094Ø
BLEED HOLE
1-1/16" Bore Standard – 1062D1-00A-00A-00
1-1/16" Bore Magnetic Band (both ends) – 1062D1-00A-00A-12
5.782 + STROKE of CYL. 1 + CYL. 2
Front Nose Mount
3.219 + STROKE of CYL. 1
1.188
.625
Maximum Stroke: 24"
.094
.125
.500
1/8 NPTF
1.125Ø
.875
.188
.624Ø
+.000
-.003
CYL. 1
.313Ø ROD
.250 WRENCH FLATS
CYL. 2
1/8 NPTF
.094Ø
BLEED HOLE
1-1/2" Bore Standard – 1500D1-00A-00A-00
1-1/2" Bore Magnetic Band (both ends) – 1500D1-00A-00A-12
Front Nose Mount
Maximum Stroke: 24"
.250
6.439 + STROKE OF CYL.1 + CYL. 2
3.625 + STROKE OF CYL.1
.750 1.500
.875
.094
1/8 NPTF (3 PLACES)
1.563Ø
.875
.250
.749Ø
+.000
-.003
CYL. 1
.438Ø
ROD
.375 WRENCH FLATS
2" Bore Standard – 2000D1-00A-00A-00
2" Bore Magnetic Band (both ends) – 2000D1-00A-00A-12
Front Nose Mount
CYL. 2
.125Ø
1/8 NPTF
BLEED HOLE
8.118 + STROKE OF CYL.1 + CYL. 2
4.641 + STROKE of CYL. 1
1.922
.875 1.188
1/4 NPTF
.125
(3 PLACES)
.375
Maximum Stroke: 24"
.313
1.375Ø .625Ø
ROD
+.000
-.003
2.078Ø
CYL. 1
.500 WRENCH FLATS
CYL. 2
.125Ø BLEED
HOLE THRU
BOTH SIDES
45
M
SERIES
Single Acting with Magnet
Features
Single Acting M Series with a magnetic band on the piston
for position sensing.
How To Order
0563
Bore
0563
0750
1062
1500
2000
=
=
=
=
=
S01 - 00A - 03
9/16"
3/4"
1-1/16"
1-1/2"
2"
Mount
S01 = Front Nose Mount
S02 = Double Nose or Rear Pivot Mount
46
Options
03 = Magnetic Piston
Rear Stroke (full inches)
00 = 0"
01 = 1"
02 = 2"
06 = 6" (maximum)
Fractional Inches
A = 0"
I
= 1/2"
M
SERIES
9/16" Bore Single Acting Spring Return – 0563S01-00A-03
Front Nose Mount with Magnetic Band
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
2.063 + 1.625 PER 1.00 STROKE
.375
.500
.188
.063
.437Ø
+.000
.625Ø
.500
-.003
.188Ø
ROD
Double Nose or Rear Pivot Mount with Magnetic Band
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
2.344 + 1.625 PER 1.00 STROKE
.375
.375
.250
.188
.063
(TYP)
.500
.625Ø
.313
(TYP)
.437Ø
+.000
-.003
.188Ø
ROD
.156Ø I.D.
BUSHING
2.187 +1.687 PER 1.00 STROKE
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
.438
.500
.813Ø
.188
.094
.500Ø
+.000
.625
-.003
.250Ø
ROD
2.972 + 1.688 PER 1.00 STROKE
.625
.438
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
1/8 NPTF
.500
.344
.281
.094 (TYP)
.875Ø
.750
.375
.624Ø
+.000
.500Ø
+.000
-.003
-.003
.250Ø
ROD
1/8 NPTF
.250Ø PIVOT PIN
47
M
SERIES
1-1/16" Bore Single Acting Spring Return – 1062S01-00A-03
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
2.502 + 1.563 PER
1.00 STROKE
.500
.094
.125
.624Ø
+.000
-.003
.313Ø ROD
.875
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
3.094 + 1.563 PER
1.00 STROKE
.500
.094
(TYP)
.125
.625
.344
1.125Ø
.281
.500
.624Ø (TYP)
+.000
-.003
.313Ø
ROD
.250Ø
PIVOT PIN
1/8 NPTF
.375
.750
.250 WRENCH FLATS
2.875 + 1.688 PER
1.00 STROKE
.750
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 6"
1/8 NPTF
.250 WRENCH FLATS
Maximum Stroke: 6"
1.125Ø
.188
.500
.875
.094
.250
1.563Ø
.250
.438Ø ROD
.749Ø
+.000
.875
-.003
1/8 NPTF
.375 WRENCH FLATS
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
.750
Maximum Stroke: 6"
.250
3.562 + 1.688 PER
1.00 STROKE
.875
.813
.094
(TYP)
.500
.375
1.563Ø
1.00
.625
(TYP)
.749Ø
+.000
-.003
.438Ø
ROD
1/8 NPTF
.375Ø
PIVOT PIN
.375 WRENCH FLATS
48
M
SERIES
2" Bore Single Acting Spring Return – 2000S01-00A-03
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
Maximum Stroke: 4"
.875 1.188
.125
2.078Ø
.313
.375
1.375Ø .625Ø
ROD
+.000
1.250
-.003
1/4 NPTF
.500 WRENCH FLATS
2" Bore Single Acting Spring Return – 2000S02-00A-03
.81
1/2", 1", 1-1/2", 2", 2-1/2", 3", 4"
1.0 STROKE=6.805
2.0 STROKE=8.805
3.0 STROKE=10.055
4.0 STROKE=12.992
.13
1.03
.38
Maximum Stroke: 4"
1.0 STROKE=5.406
2.0 STROKE=7.867
3.0 STROKE=9.117
4.0 STROKE=12.054
.56
.88
2.08Ø
.44
.75
1.375Ø
.625Ø
Rod
.375Ø Pivot Bushing
1/4 NPTF
1 1/4-12 UNF-2A Thread (Typ)
.5 Wrench Flats
1/2-20 UNF-2A Thread
49
M
SERIES
Features
The durable design of our Hole Punch Cylinder enables you to punch millions of maintenance-free
holes. The Numatics Hole Punch Cylinder is perfect for punching holes in LLDPE (Linear Low Density
Polyethylene) film. The ability to replace the punch is an integral part of the design. The punches are
replaceable without having to replace the cylinder. Our razor sharp plastic punches are self-sharpening
and are able to significantly outlast conventional steel punches in most applications. We offer the option of an air ejector, foam ejector,
and auto ejector. These ejectors discharge material slug from the center of the punch as well as prevent debris build-up. Our punches
are available in eight different punch sizes from 1/8" to 3/4."
Our punches may be used with any of our M Series cylinders that have 1/4-28 UNF-2A male threads. For your convenience, configured
three standard Hole Punch Cylinders designed specifically for hole punch applications. The standard Hole Punch Cylinder is 3/4" bore
with 1" stroke, nose mount, spring return, stainless steel rod, 1/8" NPT port, and 1/2" of thread extension to allow for adjustment of the
punch. It also includes elastomer bumpers to ensure quiet operation. The cylinder is rated for 250 psi. We offer three standard Hole
Punch Cylinder types: spring return, spring return with non-rotating rod, and spring return with hollow rod version. The standard cylinder is offered with a 1" stroke, i.e., M12263-01A. Please note that 1/2" stroke Hole Punch Cylinders are available as standard i.e., 1/2"
stroke = M12263-00I. However, strokes greater than 1" are available upon request. Mounting nuts come standard with all Hole Punch
Cylinders. Note: For air ejector use, a hollow rod cylinder is required.
3/4" Bore Single Acting Spring Return – M12263-00I
1/2" Stroke
3/4" Bore Single Acting Spring Return – M12263-01A
1" Stroke
Ø.497
Ø.500
1/4-28 UNG-2A THREAD
1.00
• Bumpers
• 1/2" Thread Extension
50
2.66 + STROKE
.69
.094
.25
.19
Ø.497
Ø.500
Ø.813
.63
1/8 NPTF
.25 HEX ROD
1/2" Stroke – Hollow Rod
1" Stroke – Hollow Rod
1/8 NPTF
• Bumpers
• Bumpers
Ø.813
.63
.250Ø ROD
1/2" Stroke – Non-Rotating Rod
1" Stroke – Non-Rotating Rod
.19
.094
1.00
• Bumpers
• Bumpers
2.41 + STROKE
.44
• Bumpers
.44
1.00
2.41 + STROKE
.094
Ø.497
Ø.500
.19
Ø.813
.63
.250Ø ROD
Ø.062 THRU
1/8 NPTF
M
SERIES
Hole Punches
D
Benefits
1/4-28 UNF-2B
• Punches are replaceable without replacing cylinder
• Self-sharpening – outlast steel punches 2-5 times (in most
applications)
• Sponge “auto” ejector standard on sizes 3/8” thru 3/4” diameter
• Auto-ejector standard on sizes 1/8” and 1/4” diameter
• Adjustable position
• Excellent for use in LLDPE (Linear Low Density
Polyethylene) Film
– Polyethylene film up to 3 mil thickness
– Polypropylene film up to 1 mil thickness
Note
1. Punches come in packages of 5.
2. Adapters are sold individually and
do not come with the punch.
3. Air ejection is available when used
on hollow rod cylinder. (M12265)
4. Jam nuts come standard on “Hole
Punch” cylinders.
1/4-28 UNF-2B
1/8 NPT
1.45
.46
C
C
B
B
A
AUTO EJECTOR PIN
INERTIA DRIVEN RIVET PIN
Hole Diameters 1/8"-1/4'
Shown with AB-1A Adapter
A
SPONGE EJECTOR
Hole Diameters 3/8"-3/4"
Part #
Hole
Diameter
A
B
C
Standard Ejector
Type
Adapter
Required
PCN-18
1/8"
.125
.54
1.00
Auto Ejector Pin
AB-1A
PCN-14
1/4"
.250
.54
1.00
Auto Ejector Pin
AB-1A
PCN-38
3/8"
.375
.54
1.00
Auto Ejector Pin
None
PCN-716
7/16"
.437
.54
1.00
Auto Ejector Pin
None
PCN-12
1/2"
.500
.54
1.00
Auto Ejector Pin
None
PCN-916
9/16"
.562
.60
1.06
Auto Ejector Pin
None
PCN-58
5/8"
.625
.60
1.06
Auto Ejector Pin
None
PCN-34
3/4"
.750
.60
1.06
Auto Ejector Pin
None
Cylinder and Punch Assemblies
C
C
.69
.50
ADJUSTMENT
.69
.500
ADJUSTMENT
51
M
SERIES
Switches and Accessories
Mounting Nuts
Mounting Nuts Included on Cylinder
Bore
S01
S02
D01
D02
D03
D04
DG1
DG2
N01
N02
R01
0.313
Yes
No
Yes
No
Yes
Yes
N/A
N/A
N/A
N/A
Yes
0.438
Yes
No
Yes
No
Yes
Yes
N/A
N/A
Yes
No
Yes
0.563
Yes
No
Yes
No
Yes
Yes
N/A
N/A
Yes
No
Yes
0.750
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
0.875
Yes
No
Yes
No
Yes
Yes
N/A
N/A
Yes
No
Yes
1.062
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
1.250
Yes
No
Yes
No
Yes
Yes
N/A
N/A
Yes
No
Yes
1.500
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
1.750
Yes
No
Yes
No
Yes
Yes
N/A
N/A
N/A
N/A
Yes
2.000
Yes
No
Yes
No
Yes
Yes
Yes
N/A
N/A
N/A
Yes
2.500
N/A
N/A
No
No
No
No
N/A
N/A
N/A
N/A
N/A
3.000
N/A
N/A
No
No
No
No
N/A
N/A
N/A
N/A
N/A
Bore
R02
D05
D06
D13
DH3
DL1
DL2
DC1
DC2
DC3
0.313
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.438
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.563
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.750
No
No Thread
No Thread
N/A
N/A
N/A
N/A
No
No
No
0.875
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.062
No
No Thread
No Thread
Yes
Yes
N/A
N/A
No
No
No
1.250
No
N/A
N/A
N/A
Yes
N/A
N/A
N/A
N/A
N/A
1.500
No
No Thread
No Thread
N/A
Yes
N/A
N/A
No
No
No
1.750
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2.000
No
N/A
N/A
N/A
N/A
No
No
N/A
N/A
N/A
2.500
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3.000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M190001
.438
HEX
M190002
.562
HEX
.16
1/4-28 UNF-2B
M190005
.938
M190006
1.125
HEX
.38
1.875
1 1/4-12 UNF-2B
52
1.875
1 3/8-12 UNF-2B
M190008
1.500
HEX
.48
1-14 UNF-2B
M190007
M190013
2.25
HEX
.50
.55
M190004
7/8 UNF-2B
HEX
M190006
.31
1/2-20 UNF-2B
1.312
HEX
M190012
.50
.750
HEX
M190003
3/4-16 UNF-2B
M190009
M190004
.25
M190007
.42
M190002
5/8-18 UNF-2B
HEX
M190005
.687
HEX
7/16-20 UNF-2B
3/8-24 UNF-2B
M190001
HEX
M190003
.22
M190008
.50
1 1/2-12 UNF-2B
M190009
M190012
M190013
M
SERIES
M117001
M117002
Single Acting 5/16" Bore
1.000
1.00
.063
Ø.141 THRU
2 PLACES
.75
.094
Ø.376
.125
.500
1.875
1.625
.125
.563
.266
TYP
1.00
.750
.625
Ø.501
.563 R
1.375
.25
.125
M117009
2" Bore
3.125
1.44
Ø1.501
1.00 R
2.50
.625
M117009
2" BORE
1.750
.625
.125
M117007
2.125
.75
.188
M117008
1 3/4" BORE
.250
1.000
1.625
.344
1.44
1.750
1.250R
1.750
1.250R
Ø1.626
3.000
.750
M1170010
2 1/2" BORE
1.25
3" Bore
4.375
1.625
.250
.906R
Ø1.032
1 1/2" BORE
M117011
.344
1.125
.250
.750R
1.00
1.625
1.125
1.125
1.75
1.00
.250
.250
1.000
Ø1.376
1.094
.188
1.50
.344
.938
Ø.751
.188
.875
1.50
.938
.406R
3.000
.75
.625
.688 .094
M117008
.125
.281
TYP
M117006
2-1/2" Bore
SINGLE ACTING
3/4" BORE
3.750
.344
1.125
.750
M117010
M117005
1 1/16" BORE
1.500
.438
.203
TYP
.750
Ø.626
2.50
.125
M117004
1-3/4"
Bore
SINGLE ACTING
7/16"
BORE
1-1/4" and 1-1/2" Bore
.094
.875
.063
M117003
M117007
9/16" BORE
.313R
.563
.125
.094
.500
Ø.376
.828
M117006
3/4", 7/8" and 1-1/16" Bore
.500
.375R
.563
.063
M117005
.813
.75
.438
M117001
.312
.625
.688
.500
Ø.438
.750
.063
.438
.063
.125
.31 R
.376Ø
1.375
.203
TYP.
.375
.500
.31 R
1.375
.203
TYP.
.25.375
.125R
.125
.750
M117004
7/16" and 9/16" Bore
.063
.141Ø
THRU
2 PLACES
.250.375
.125 R
M117003
Double Acting 5/16" Bore
1.890
3.140
.890
.250
M1170011
3" BORE
53
M
SERIES
Pivot Mounting Brackets
M129001
9/16" Bore
7/16" Bore
.040
TYP.
.500
.170
.260
.500
.340
.125
TYP.
.125
.203
TYP
.500
.500
M129003
.750
.750
.266
TYP
.438
.266
TYP
.188
TYP.
.313 R
.813
.125
.38
.125
.813
1-1/4" Bore
.188
TYP.
.438
.266
TYP
.313 R
1.188
.875
M129005
M129003 3/4" BORE
1-1/2" Bore
1.000
.266
TYP
1.000
.625
1.125
M229005
.625
.265/.235
.625
1.000
1.000
.266
TYP
.125
.266
TYP
.688
.250
TYP.
.375 R
1.125
1.375
.250
TYP.
1.000
1.750
1.500
1.500
M229006
M029004
1 1/2" BORE
3" Bore
1.250
1.375
1.750
.375
.375
.265/.235
.375 R
Ø.376
1.375
.125
1.125
1.000
.375 R
1.750
.250
.688
.266
TYP
Ø.376
Ø.376
.75 .265/.235
.265/.235
1.125
.250
TYP.
.266
TYP
.688
.265/.235
.266
TYP
1.000
2 and 2-1/2" Bore
.250
TYP.
.688
.125
.125
1.125
M229003 1 1/4" BORE
1-3/4" Bore
.250
TYP.
1.000
.250
TYP.
.125
1.125
M029004
.313 R
.250
.125
M029003 3/4" BORE
.750
1.188
.875
1.125
.813
Ø.251
.250
.125
.125
.438
.266
TYP
.188
TYP.
.750
1.188
.250
.50
.125
.813
.188
TYP.
.438
Ø.251
Ø.251
1.500
M229003
M129002 9/16" BORE
M029002 7/16" BORE
.750
.875
.750
3/4", 7/8" and 1-1/16" Bore
.125
.188
TYP.
.063
.750
.438
.766
.563
.063
.266
TYP
.203 R
.125
.625
.813
.500
.766
.563
.125
.266
TYP
.500
Ø.157
.188
.813
.125
.438
.281
.125
TYP.
.203 R
.406
M029003
.063
.34
.203 TYP
Ø.157
3/4",
7/8" 5/16"
and 1-1/16" Bore
M129001
.188
BORE
.750
TYP.
.125
TYP.
.281
.063
.281
.125
TYP.
Ø.128
.500
.063
.203
TYP
.500
.500
.203
TYP
.281
.063
.125 RADIUS
M129002
M029002
5/16" Bore
.265/.235
1.500
M229005 2 1/2" BORE
M129005 1 3/4" BORE
.250
TYP.
.266
TYP
.875
.88 .265/.235
.265/.235
.875
.266
TYP
.250
TYP.
1.500
1.250
.500 R
Ø.501
1.750
2.250
.500
.265/.235
54
1.750
M229006 3" BORE
Rod Clevis
M127001
M127002
5/16" Bore
7/16" and 9/16" Bore
.437
.11
.313
.750
#5-40
UNC-2B
.13
#10-32 UNF-2B
.375
Ø.188
Ø.126
.188
.531
.375
.313
.562
.130
.094
TYP.
M
SERIES
.375
.193
.563
.094
TYP.
.938
M127003
M127001
5/16"7/"
3/4" and
BORE
M127004
Bore
.938
1-1/16" Bore
.938
.16
.19
1/4 - 28 UNF-2B
.500
.500
5/16 - 24 UNF-2B
M127002 7/16"
BORE
Ø.251
Ø.251
.500
.500
.687
.500
.687
.500
.255
.255
.124
TYP.
.124
TYP.
1.188
M127005
1.188
M127006
1-1/4" and 1-1/2" Bore
1-3/4", 2" and 2-1/2" Bore
M127004 1 1/16"
BORE 1.313
1.313
M127003 3/4" BORE .25
.31
1/2 - 20 UNF-2B
7/16 - 20 UNF-2B
.750
.750
Ø.376
Ø.376
.750
1.031
.750
.750
1.031
.380
.750
.380
.187
TYP.
1.688
.187
TYP.
1.688
M127007
3" Bore
M127005
2.2501 1/4"
BORE
.38
5/8 - 18 UNF-2B
1.000
Ø.501
1.250
M127006 1 3/4"
BORE
1.000
1.281
.505
.250
TYP.
2.750
M127007 3" BORE
55
M
SERIES
M Series World application Detail
1
Profile Tube Detail
2
1. World Switch
2. Band Clamp Kit
3. Adjustment Screw
3
M series World Switch
M series Switch Rails (W,X,Y,Z)
Cylinders
Bore
Part Number
M series Bracket Kit
9/16”
SBK056A
3/4”
SBK075
7/8”-1 1/4”
SBK106
1 1/2”
SBK150
1 3/4”-2”
SBK200
2.5”
SBK250A
3”
SBK300A
Cylinders
M series
M series World Switch Hall Effect Part Numbers
Bore
Part Number
Direct Fit w/included
adapter
All
P/N
Switch Style
Electrical
Design
Output
Operating
Voltage
Current Rating
Switching
Power
Voltage
Drop
NEMA IP
Rating
Temperature
Rating
SH6-031
Flying Lead
PNP
Normally
Open
6-24 VDC
0.3 Amps
Max.
7.2 Watts
Max.
0.5 Volts
NEMA 6
-25º to +75º C
SH6-032
Flying Lead
NPN
Normally
Open
6-24 VDC
0.3 Amps
Max.
7.2 Watts
Max.
0.5 Volts
NEMA 6
-25º to +75º C
SH6-021
M8 Connector
PNP
Normally
Open
6-24 VDC
0.3 Amps
Max.
7.2 Watts
Max.
0.5 Volts
NEMA 6
-25º to +75º C
SH6-022
M8 Connector
NPN
Normally
Open
6-24 VDC
0.3 Amps
Max.
7.2 Watts
Max.
0.5 Volts
NEMA 6
-25º to +75º C
Hall Effect Switch
.921
.531
PNP Sourcing
NPN Sinking
.559
.433
.921
.531
.559
.433
56
M
SERIES
M Series World Switch Reed Switch Part Numbers
P/N
Switch Style
Electrical
Design
Output
Operating
Voltage
Current Rating
Switching
Power
Voltage
Drop
NEMA IP
Rating
Temperature
Rating
SR6-002
Flying Lead
AC/DC REED
Normally Open
5-120 VAC/DC
0.025 Amps Max.
0.001 Amps Min.
3 Watts Max.
3.5 Volts
NEMA 6
-25º to + 75º C
SR6-004
Flying Lead
AC/DC REED
Normally Open
5-120 VAC/DC
0.5 Amps Max.
0.005 Amps Min.
10 Watts Max.
3.0 Volts
NEMA 6
-25º to + 75º C
SR6-022
M8 Connector
AC/DC REED
Normally Open
5-50 VAC
5-60 VDC
0.025 Amps Max.
0.001 Amps Min.
12 Watts Max.
0.5 Volts
NEMA 6
-25º to + 75º C
SR6-024
M8 Connector
AC/DC REED
Normally Open
5-50 VAC
5-60 VDC
0.5 Amps Max.
0.005 Amps Min.
10 Watts Max.
3.0 Volts
NEMA 6
-25º to + 75º C
Reed Switch - Normally Open Type SR6
.921
.531
.559
.433
.921
.531
.559
.433
Non-Repairable Cylinders
M Series
Bore
Bracket P/N
9/16"
N199-1054
3/4"
N199-1055
7/8"
1 1/16"
Sensor
Description
Standard Cord
Set
Quick Disconnect
Reed Switch
REED-FL2-00
REED-QDS-M8U
N199-1055
Hall PNP
PNP-FL2-00-U PNP-QDS-M8-U
N199-1056
Hall NPN
NPN-FL2-00-U NPN-QDS-M8-U
1 1/4"
N199-1056
See page 58, 59, & 60 for sensor specifications
1 1/2"
N199-1057
1 3/4"
N199-1058
2"
N199-1058
2 1/2"
N199-1059
3"
N199-1060
57
M
SERIES
PNP-FL2-00-U
PNP-QDS-M8-U
.98 [25.0]
PART
NUMBER
1.50 [38.1]
1.46 [37.0]
.25 [6.4]
LED
.20 [5.1]
P494A0022600A00
.20 [5.0]
.20 [5.0]
SENSING FACE
SENSING FACE
78.74 [2000.0]
PART
NUMBER
.20 [5.1]
P494A0022300A00
11.81 [300.0]
M8 x 1.0
BLUE (-)
BLACK (OUTPUT)
BROWN (+)
26 GAUGE WIRES
FASTENING CLAMP
FASTENING CLAMP
ELECTRICAL DESIGN
DC PNP
OUTPUT
ELECTRICAL DESIGN
Normally Open
OPERATING VOLTAGE
10-30 VDC
CURRENT RATING
100 mA
DC PNP
OUTPUT
Normally Open
OPERATING VOLTAGE
10-30 VDC
CURRENT RATING
100 mA
SHORT-CIRCUIT
PROTECTION
Yes
SHORT-CIRCUIT
PROTECTION
Yes
OVERLOAD PROTECTION
Yes
OVERLOAD PROTECTION
Yes
REVERSE POLARITY
PROTECTION
Yes
REVERSE POLARITY
PROTECTION
Yes
VOLTAGE DROP
< 2.5 V
VOLTAGE DROP
< 2.5 V
CURRENT CONSUMPTION
< 12 mA
CURRENT CONSUMPTION
< 12 mA
REPEATABILITY
< .2mm
REPEATABILITY
< .2mm
POWER-ON DELAY TIME
< 30 ms
POWER-ON DELAY TIME
< 30 ms
SWITCH FREQUENCY
> 3000 Hz
AMBIENT TEMPERATURE
-25ºC to 85ºC
SWITCH FREQUENCY
> 3000 Hz
AMBIENT TEMPERATURE
-25ºC to 85ºC
PROTECTION
IP 67, III
PROTECTION
IP 67, III
HYSTERESIS
1.0mm
HYSTERESIS
1.0mm
MAGNETIC SENSITIVITY
2.0 mT
2.0 mT
TRAVEL SPEED
> 10 m/s
TRAVEL SPEED
HOUSING MATERIAL
PA (Polyamide) Black; Fastening Clamp:
Stainless Steel
FUNCTION DISPLAY
SWITCHING STATUS
Yellow LED
CONNECTION
Flying Leads, Pur Cable (2m Long, 3 x26
Gauge Wire)
> 10 m/s
HOUSING MATERIAL
Stainless Steel
FUNCTION DISPLAY
SWITCHING STATUS
Yellow LED
CONNECTION
M8 Connector (Snap Fit) , Pur Cable (.3 m)
REMARKS
Clamping Screw with Combined Slot/Hexagon
Socket Head AF 1.5
cULus - Class 2 Source Required
REMARKS
Socket Head AF 1.5
ACCESSORIES
Rubber Placehold, Cable Clip, and Cut Sheet
To Be Provided with Every Switch
ACCESSORIES
AGENCY APPROVALS
58
.98 [25.0]
.25 [6.4]
LED
RoHS
AGENCY APPROVALS
RoHS
*Switches are not designed for wet environments. Please see your distributor for additional information.
NPN-FL2-00-U
NPN-QDS-M8-U
.98 [25.0]
1.50 [38.1]
PART
NUMBER
BLUE (-)
BLACK (OUTPUT)
BROWN (+)
26 GAUGE WIRES
ELECTRICAL DESIGN
OUTPUT
.98 [25.0]
.25 [6.4]
LED
.20 [5.1]
P494A0022400A00
78.74 [2000.0]
CURRENT RATING
1.46 [37.0]
PART
NUMBER
.25 [6.4]
LED
.20 [5.1]
P494A0022700A00
.20 [5.0]
.20 [5.0]
SENSING FACE
SENSING FACE
11.81 [300.0]
M8 x 1.0
FASTENING CLAMP
FASTENING CLAMP
ELECTRICAL DESIGN
DC NPN
Normally Open
OPERATING VOLTAGE
10-30 VDC
DC NPN
OUTPUT
Normally Open
OPERATING VOLTAGE
10-30 VDC
CURRENT RATING
100 mA
100 mA
SHORT-CIRCUIT
PROTECTION
Yes
SHORT-CIRCUIT
PROTECTION
Yes
OVERLOAD PROTECTION
Yes
OVERLOAD PROTECTION
Yes
REVERSE POLARITY
PROTECTION
Yes
REVERSE POLARITY
PROTECTION
Yes
VOLTAGE DROP
< 2.5 V
VOLTAGE DROP
< 2.5 V
CURRENT CONSUMPTION
< 12 mA
CURRENT CONSUMPTION
< 12 mA
REPEATABILITY
< .2mm
REPEATABILITY
< .2mm
POWER-ON DELAY TIME
< 30 ms
POWER-ON DELAY TIME
< 30 ms
SWITCH FREQUENCY
AMBIENT TEMPERATURE
> 3000 Hz
-25ºC to 85ºC
SWITCH FREQUENCY
> 3000 Hz
AMBIENT TEMPERATURE
-25ºC to 85ºC
IP 67, III
PROTECTION
IP 67, III
HYSTERESIS
1.0mm
HYSTERESIS
1.0mm
2.0 mT
2.0 mT
PROTECTION
TRAVEL SPEED
M
SERIES
TRAVEL SPEED
> 10 m/s
> 10 m/s
HOUSING MATERIAL
Stainless Steel
HOUSING MATERIAL
Stainless Steel
FUNCTION DISPLAY
SWITCHING STATUS
Yellow LED
FUNCTION DISPLAY
SWITCHING STATUS
Yellow LED
CONNECTION
Flying Leads, Pur Cable
(2m Long, 3 x26 Gauge Wire)
CONNECTION
M8 Connector (Snap Fit) , Pur Cable (.3 m)
REMARKS
Socket Head AF 1.5
REMARKS
Socket Head AF 1.5
ACCESSORIES
ACCESSORIES
AGENCY APPROVALS
RoHS
AGENCY APPROVALS
RoHS
59
M
SERIES
REED-FL2-00
REED-QDS-M8U
1.20 [30.5]
.22 [5.7]
1.50 [38.1]
1.20 [30.5]
.25 [6.4]
PART
NUMBER
.20 [5.1]
.22 [5.7]
.25 [6.4]
PART
NUMBER
.20 [5.1]
P494A0021600A00
.20 [5.0]
LED
T AA
0809
T AA
0809
P494A0021300A00
1.46 [37.0]
.20 [5.0]
LED
78.74 [2000.0]
11.81 [300.0]
BLUE (-)
BROWN (+)
26 GAUGE WIRES
FASTENING CLAMP
FASTENING CLAMP
ELECTRICAL DESIGN
AC/DC REED
ELECTRICAL DESIGN
AC/DC REED
OUTPUT
Normally Open
OUTPUT
Normally Open
OPERATING VOLTAGE
5-120 VAC/DC
OPERATING VOLTAGE
CURRENT RATING
100 mA*
*5-60 VDC / 5-50 VAC
CURRENT RATING
100 mA
SHORT-CIRCUIT
PROTECTION
No
SHORT-CIRCUIT
PROTECTION
No
OVERLOAD PROTECTION
No
OVERLOAD PROTECTION
No
REVERSE POLARITY
PROTECTION
Yes
REVERSE POLARITY
PROTECTION
Yes
VOLTAGE DROP
<5V
VOLTAGE DROP
<5V
REPEATABILITY
± .2mm
REPEATABILITY
± .2mm
MAKETIME INCLUDING
BOUNCE
< .6 ms
MAKETIME INCLUDING
BOUNCE
< .6 ms
BREAKTIME
< .1 ms
BREAKTIME
< .1 ms
SWITCHING POWER (MAX)
SWITCH FREQUENCY
5W
1000 Hz
AMBIENT TEMPERATURE
-25ºC to 70ºC
SWITCHING POWER (MAX)
5W
SWITCH FREQUENCY
1000 Hz
AMBIENT TEMPERATURE
-25ºC to 70ºC
PROTECTION
IP 67, II
PROTECTION
IP 67, II
HYSTERESIS
.9mm
HYSTERESIS
.9mm
HOUSING MATERIAL
Stainless Steel
HOUSING MATERIAL
Stainless Steel
FUNCTION DISPLAY
SWITCHING STATUS
Yellow LED
FUNCTION DISPLAY
SWITCHING STATUS
Yellow LED
CONNECTION
REMARKS
ACCESSORIES
AGENCY APPROVALS
60
M8 x 1.0
Flying Leads, Pur Cable
(2m Long, 2 x26 Gauge Wire)
*External Protective Circuit for Inductive Load
(Valve, Contactor, Etc..) Necessary.
Conforms to 2008 NEC Section 725 III,
Class 2 Circuits
Clamping Screw with Combined Slot/
Hexagon Socket Head AF 1.5.
No LED Function in case of Polarity in DC
Operation
Rubber Placehold, Cable Clip, and Cut
Sheet
RoHS
CONNECTION
M8 Connector (Snap Fit), Pur Cable (.3m)
REMARKS
*External Protective Circuit for Inductive Load
(Valve, Contactor, Etc..) Necessary.
Conforms to 2008 NEC Section 725 III,
Class 2 Circuits
M8 Connector voltage limited to 5-60 vdc /
5-50 vac to conform with 2008 IEC 610762-104
Clamping Screw with Combined Slot/
Hexagon Socket Head AF 1.5.
No LED Function in case of Polarity in DC
Operation
ACCESSORIES
AGENCY APPROVALS
RoHS
M
SERIES
Quick Disconnect Cables
196.85 [5000]
196.85 [5000]
1.50 [38.1]
1.2 [31]
1.06 [27]
1.50 [38.1]
ø.4 [10]
BLUE (–)
BROWN (+)
BLACK (OUTPUT)
26 GAUGE WIRES
Order Code
M8 x 1
PXCST
Wiring
Core colors
BK
black
BN
brown
BU
blue
Type
.71 [18]
BLUE (–)
BROWN (+)
BLACK (OUTPUT)
26 GAUGE WIRES
4
3
1
Operating Voltage
1
3
4
BN
BU
BK
ø.4 [10]
M8 x 1
PXC90
Current Rating
Cable Material
Protection
Connector
PXCST
Straight 5 m Cable (3 x 26 Gauge wire)
60 AC/75 DC
3A
PUR
IP 68, III
M8
PXC90
90° 5 m Cable (3 x 26 Gauge wire)
60 AC/75 DC
3A
PUR
IP 68, III
M8
61
World Class Supplier of Pneumatic Components
World Headquarters
USA Numatics, Incorporated
Canada Numatics, Ltd
México - Ascomatica SA de CV
Brazil Ascoval Ind.e Comercio Ltda
46280 Dylan Drive
Novi, Michigan 48377
P: 519-758-2700
F: 519-758-5540
P: 52 55 58 09 56 40 (DF y Area metropolitana)
P: 01 800 000 ASCO (2726) (Interior de la República)
F: 52 55 58 09 56 60
P: (55) 11-4208-1700
F: (55) 11-4195-3970
P: 248-596-3200
F: 248-596-3201
LT-MSeriesCatalog Rev 02/15
2.5M-TGI-10/09
© Numatics Inc. 2008 - 2013
Numatics® is registered in the United States and elsewhere
Numatics, Inc. | Tel (248) 596-3200 | www.numatics.com | email: [email protected]

M Series

Transcription

Similar documents

October 2014

(POR-8) Porsche 911ST (2.3,2.4,2.5)

A Randomized Controlled Trial on Rehabilitaºon through Caregiver

Reduce Stroke Risk - National Stroke Association

Understanding Strokes - Petersen Health Care

Full Sheet Flyer Feb 2016 - Crawford County Commission on Aging

Understanding Diagnosis and Treatment of Cryptogenic Stroke

What is Stroke Handout - American Stroke Association

Brochure AP-810-AH-T

Eastern NC Stroke Network Meeting