M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog

Transcription

11/15/07
1:49 PM
Page A
Fixings and Supports
for Plumbing, Fire
Protection, Heating,
Ventilation and
Air Conditioning
Asia/Australia
11/15/07
1:49 PM
Page B
DESIGNS
All dimensions are ± 5% and product design and specifications are subject to change without notice.
DESIGN AND MANUFACTURING
Supports and hangers may be manufactured in conformance with one or more of the following:
Manufacturers Standardization Society MSS-SP-58
Federal Specification WW-H-171
Factory Mutual Research Corporation
Underwriters Laboratories, Inc.
National Fire Protection Association NFPA®-13 , NFPA 24
ANSI Code for Pressure Piping
TERMS AND CONDITIONS OF SALE
For ordering, terms and conditions of sale, please consult our current price guide.
WARNING
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO
customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property
damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages,
defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within
6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and
procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event
be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming
or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY
AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed
the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS
OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
ANSI is a registered trademark of American National Standards Institute
ASTM is a registered trademark of ASTM International
UL is a is a registered trademark of Underwriters Laboratories, Inc.
ASME is a is a registered trademark of American Society of Mechanical Engineers
NFPA is a registered trademark of National Fire Protection Association
Singapore: 65-6-268-3433 / Australia: 61-2-9479-8500
www.erico.com
11/15/07
1:49 PM
Page C
TABLE OF CONTENTS
Made to Order Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page XXI
1 Pipe Clamps - Rubber Lined/Insulated . . . . . . . . . . . . . . . . . Page 1
2 Pipe Clamps - Unlined/Uninsulated . . . . . . . . . . . . . . . . . . . . Page 7
3 Sprinkler Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
4 Clevis Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 39
5 Riser Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 43
6 Strut Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 47
7 Medium Duty Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . Page 55
8 Heavy Duty Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 59
9 Domestic Pipe Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 63
10 Ducting Support Products . . . . . . . . . . . . . . . . . . . . . . . . . Page 77
11 Plastic Pipe Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 83
12 Beam Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 87
13 CADDY Spring Steel Fixing & Fasteners . . . . . . . . . . . . . . Page 91
14 CADDY® SPEED LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 123
15 Sound Insulation Products . . . . . . . . . . . . . . . . . . . . . . . . Page 129
16 CADDY® PYRAMID Pipe & Equipment Supports . . . . . . . Page 133
17 C-Profile System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 139
18 Strut, Fittings & Accessories. . . . . . . . . . . . . . . . . . . . . . . Page 145
19 Installation Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 167
20 Stainless Steel Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 185
21 Guides and Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 197
22 CADDY® Seismic Sway Bracing . . . . . . . . . . . . . . . . . . . . Page 213
22 Technical Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 221
23 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 233
www.erico.com
N
E
W
S
11/15/07
1:49 PM
Page I
PIPE CLAMPS - RUBBER LINED / INSULATED
NEW
NEW
NEW
1
Page 2
Page 3
Page 4
Page 5
243
250
240LF
HDPCI
PIPE CLAMPS - UNLINED / UNINSULATED
N
E
W
S
Page 9
Page 10
Page 10
250 - Steel
ADJ - Steel
ADJ - Steel
Page 12
Page 13
Page 14
ADJ - PVC
NUT - Copper
NUT - PVC
Page 15
Page 16
Page 17
SAD - Copper
SAD - Steel
SAD - PVC
I
2
Page 11
ADJ - Copper
Page 14
PNG - PVC
Page 18
SOB - Copper
www.erico.com
11/15/07
1:49 PM
Page II
Page 18
Page 19
Page 20
SOB - PVC
TPC - Copper
TPC - Steel
2
Page 21
TPC - PVC
NEW
Page 21
Page 22
Page 22
TPC - PVC
TPC - FRC
HDPC
3
SPRINKLER SUPPORTS
NEW
NEW
NEW
Page 24
Page 25
Page 26
Page 27
EPB
FCN
CNC
HDPC NI
NEW
NEW
Page 28
Page 29
Page 30
Page 31
N
E
W
401
CADDY® SLOT LOCK
www.erico.com
CADDY® EZ RISER
II
CDS
S
11/15/07
1:50 PM
Page III
SPRINKLER SUPPORTS
3
NEW
NEW
Page 31
Page 32
Page 32
Page 33
CLS
CTC
ERIC1
U-bolt
Page 34
Page 35
Page 36
107 - For CPVC pipe
108 - For CPVC pipe
109 - For CPVC pipe
Page 37
SO - For CPVC pipe
4
CLEVIS HANGERS
NEW
NEW
NEW
NEW
NEW
NEW
N EW
Page 40
Page 41
Page 42
401
CADDY SLOT LOCK
402 - Clevis for copper pipe
®
5
RISER CLAMPS
NEW
NEW
NEW
N
E
W
S
Page 44
Page 45
Page 46
CADDY® EZ RISER
511 - Riser for copper pipe
700
III
www.erico.com
11/15/07
1:50 PM
Page IV
6
STRUT CLIPS
Page 48
Page 49
Page 50
RIGD
TCC
CHC - For Copper pipe
Page 52
Page 53
CHC - For PVC pipe
CHC - For P/PVC pipe
MEDIUM DUTY PIPE CLAMPS
Page 56
Page 57
Page 58
ERIC15
ERIC16
ERIC18
HEAVY DUTY PIPE CLAMPS
Page 51
CHC - For Steel pipe
7
8
N
E
W
S
Page 60
Page 61
ERIC30
ERIC31
www.erico.com
IV
11/15/07
1:50 PM
Page V
9
DOMESTIC PIPE CLIPS
Page 64
Page 65
Page 65
Page 66
BRC
CU-HF
CU-SAD
CUS
Page 67
Page 68
Page 69
Page 70
FFC
SPH
HNG
HST
Page 70
Page 71
Page 72
Page 73
SOW
SPC - For Copper pipe
SPC - For PVC pipe
Page 74
Page 74
Page 75
WB
WB-PPC
WB-ADJ
SPC - For P/PVC pipe
N
E
W
S
V
www.erico.com
11/15/07
1:50 PM
Page VI
10
DUCTING SUPPORT PRODUCTS
Page 78
Page 79
Page 79
Page 80
MACRO V ISO
EQV
EQVS
EQZS
Page 80
Page 81
EQLS
EQ-ZAB
11
PLASTIC PIPE FIXINGS
Page 84
Page 85
Page 86
CADDY® SUPERKLIP
TSM
TSMI
N
E
W
S
www.erico.com
VI
11/15/07
1:51 PM
Page VII
BEAM CLAMPS
12
Page 88
Page 89
Page 90
Page 90
TK300
BTK310
HB2
315
SPRING STEEL FIXING & FASTENERS
N
E
W
S
13
Page 94
Page 94
Page 95
Page 95
H
H-i
H-ST
H-CT
Page 96
Page 96
Page 97
Page 98
H-CTB
H-MA
H-Ti/T
H-S
Page 98
Page 99
Page 99
Page 100
H-SR
H-MSM
H-PSM
EM
VII
www.erico.com
11/15/07
1:51 PM
Page VIII
13
Page 100
Page 101
Page 101
Page 102
EM-SM
EM-P
EM-M
VF
Page 102
Page 103
Page 103
Page 104
VAFT
J
J-MA
J-Ti/T
Page 104
Page 105
Page 105
Page 106
EBC
EBC-MSM
EBC-M
EBC_P
Page 106
Page 107
Page 107
Page 108
INC8
122
122 MA
122 Ti
N
E
W
S
www.erico.com
VIII
11/15/07
1:51 PM
Page IX
13
Page 108
Page 109
Page 109
Page 110
122 T10
EER
EERS
EER-Ti/T
Page 110
Page 111
Page 111
Page 112
EER-MA
TDH
TDHP MK2
HW
Page 112
Page 113
Page 113
Page 114
WDC/WDC-M
GTD
PW2
Page 114
Page 115
Page 116
4Z34-CTS
K
AB
PW2 Ti/T
Page 116
Ti/T
N
E
W
S
IX
www.erico.com
11/15/07
1:52 PM
Page X
13
Page 116
Page 117
Page 117
B-Ti/T
MAB
MEBN
CADDY® SPEED LINK
14
NEW
Page 120
Page 121
Page 122-123
CADDY® SPEED LINK
CADDY® SPEED LINK LD
Tools & Accessories
15
SOUND INSULATION PRODUCTS
Page 126
Page 126
Page 127
Page 127
SBFF
SGBC
SBMF
SBMK
N
E
W
S
Page 128
Page 128
SBFK
KIT U SILENT
www.erico.com
X
11/15/07
1:52 PM
Page XI
16
CADDY® PYRAMID
NEW
NEW
NEW
NEW
Page 130
Page 131
Page 132
Page 132 - 133
CADDY PYRAMID 50
CADDY PYRAMID 25
CADDY PYRAMID 150
CADDY® PYRAMID 300
CADDY® PYRAMID 600
®
®
®
C-PROFILE SYSTEM
17
NEW
NEW
NEW
NEW
Page 136
Page 137
Page 138
Page 138
EOL
C-EOL
CFIX
CFIX
NEW
NEW
NEW
Page 139
Page 139
Page 140
ECN EOL/EO
KP
ADK
N
E
W
S
XI
www.erico.com
11/15/07
1:52 PM
Page XII
18
STRUT, FITTINGS & ACCESSORIES
Page 144
Page 144
Page 145
Page 145
41 x 41
41 x 21
Slotted Angle
KH
Page 146
Page 146
Page 147
Page 148
ECB
ISSP
CADDY SLICK NUT
STS
Page 149
Page 149
Page 150
Page 150
UM
UA
UD
ZTA605
Page 151
Page 151
Page 151
Page 152
ADK 421
Profile Capping
ZTA601
ZT606
®
N
E
W
S
www.erico.com
XII
11/15/07
1:53 PM
Page XIII
18
Page 152
Page 152
Page 153
Page 153
ZZ704
INC8
ZEA110
ZEA100
Page 153
Page 154
Page 154
Page 154
ZEA102
ZEA104
ZEA106
ZEA107
Page 155
Page 155
Page 156
Page 156
ZEA108
ZEA109
ZWA 200
ZWA202
Page 156
Page 157
Page 157
Page 157
ZWA203
ZWA205
ZWA207
ZWA209
N
E
W
S
XIII
www.erico.com
11/15/07
1:53 PM
Page XIV
18
Page 158
Page 158
Page 159
Page 159
ZZA702
ZSA301
ZUA400
ZUA401
Page 159
Page 160
Page 160
Page 160
ZWA214
ZWA215
ZSA304
ZGA501
Page 161
Page 161
Page 162
Page 162
ZZA701
P11
P13
ROL10
Page 162
ROL11
N
E
W
S
www.erico.com
XIV
11/15/07
1:54 PM
Page XV
INSTALLATION ACCESSORIES
19
Page 165
Page 165
Page 166
Page 166
ISN
IHT
VDF
TMN
Page 166
Page 167
Page 167
Page 168
LA
ANG
HSCR
CMP
Page 168
Page 169
Page 169
Page 169
Rod Coupling
D1
D2
D3
Page 170
Page 170
Page 171
Page 171
E2
Rod Connectors
ERIC
Strike Anchor
N
E
W
S
XV
www.erico.com
11/15/07
1:54 PM
Page XVI
19
Page 172
Page 173
Page 174
Page 174
Ferrules
NUT
Threaded Rod
Page 175
Page 175
Page 176
Hex Head Set Screws
Square Washer
Suredrive Anchor
Page 177
Page 177
Page 177
Page 178
Hardware Washers
Hardware Washers
ESGP
MSP
Page 178
Page 179
Page 179
Barrnog/TSGBHD
TSGB
TPC
Isolation Rubber
Page 176
VMP
N
E
W
S
www.erico.com
XVI
11/15/07
1:54 PM
Page XVII
STAINLESS STEEL RANGE
20
Page 183
Page 183
Pages 184
Page 184
CADDY ERISTRUT
CADDY ERISTRUT
UA
UM
®
Page 185-186
CHC
Page 190
CADDY® MACROFIX
Page 187
SPC
Page 191
105
Page 193
Page 194
H-CTB-2
M-MSM-2
Page 188
Page 189
WB
CADDY MACROFIX NI
Page 192
Page 193
406
H-2
Page 194
Page 195
EM-2
EM-M-2
®
N
E
W
S
XVII
www.erico.com
11/15/07
1:55 PM
Page XVIII
20
Page 195
Page 195
Pages 196
Page 196
Threaded Rod
Hex Head Set Screws
HSCR
NUT
21
GUIDES & ROLLERS
Page 198
Page 198
Page 200
Page 201
ROL12
ROL13
ROL14
ROL15
Page 202
Page 203
Page 204
Page 205
610
615
PESMO
PESHO
Page 206
Page 207
Page 208
Page 209
PESMOS
PESHOS
PESMT
PESHT
www.erico.com
XVIII
N
E
W
S
11/15/07
1:55 PM
Page XIX
GUIDES & ROLLERS
Page 210
Page 211
PESMTS
PESHTS
21
CADDY® SEISMIC SWAY BRACING
N
E
W
S
22
Page 214
Page 215
Page 215
Page 215
TP220
TP225
TP225G
TP225A
Page 216
Page 216
Page 217
Page 217
TP230
TP230G
TP235
TP240
Page 218
Page 219
Page 220
TP280
SB55
CADDY® EZ BRACE
XIX
www.erico.com
11/15/07
www.erico.com
1:55 PM
XX
Page XX
11/15/07
1:55 PM
Page XXI
MADE TO ORDER PRODUCTS
When you’re looking for a wide variety of high-quality, made-to-order clamps from a trusted source, turn to ERICO®.
Adjustable and stand-off bracket clamps are available with plain, hot-dip galvanized and polyester powder coated finishes
and can accommodate pipe sizes up to 315 mm. Or you can choose from saddle or two-piece clamps to accommodate
pipe sizes up to 1,200 mm. A wide variety of other configurations are also available upon request.
ERICO offers short lead times on most made-to-order products and can provide product testing and material certification
upon request. And best of all, your custom products are easy to order! Simply call your ERICO representative or visit
www.erico.com and download the Made-to-Order Request for Pricing Form.
Clamp Type
Adjustable
Pipe range: up to 315 mm OD
Materials thickness available: 3 mm & 6 mm
Material types available: Mild steel & 316 Stainless Steel (SS)
Material finishes: Plain (PL), Hot Dip Galvanised (HDG) & polyester
powder coated (PPC)
Saddle
Materials thickness available: 3 mm, 6 mm, 8 mm, 10 mm, 12 mm,
16 mm & 20 mm
powder coated (PPC)
Stand Off Bracket
Materials thickness available: 3 mm & 6 mm
powder coated (PPC)
Two Piece Clips
Materials thickness available: 3 mm, 6 mm, 8 mm, 10 mm, 12 mm,
16 mm & 20 mm
powder coated (PPC)
XXI
www.erico.com
11/15/07
1:55 PM
Page 1
1
NEW
NEW
NEW
Page 2
Page 3
Page 4
Page 5
243
250
240LF
HDPCI
www.erico.com
1
11/15/07
1:55 PM
Page 2
CADDY® SUPERFIX 243 M8/M10
One piece pipe clip with M8/M10 combi boss
• Easy to install locking mechanism
• EPDM rubber insulation for sound reduction compliant
with DIN 4109, average degree of improvement: 20dB
• Cylinder head screw M6 (+ 101 mm = M8) with combination
head (slot & crosshead)
• Steel profile (W x T)
• For pipe diameter from 12 to 114 mm
• Temperature rating from -50°C up to +110°C
• Fire rating B2 acc. to DIN EN 13501-1:E
• Closed cap nut prevents rod damage to hanger
• Finish: Electro-zinc plated (EG)
400063
400064
400065
400066
400067
400068
400069
400070
589350
400071
400072
400073
400074
400075
400076
400077
Ø
(in)
d
(mm)
1/4
3/8
1/2
3/4
1
1-1/4
12-14
15-19
21-23
26-28
32-35
40-43
44-49
48-52
54-58
57-61
63-67
70-73
74-80
83-91
101-106
108-114
1-1/2
2
2-1/2
3
4
WxT
(mm)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
23
23
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
Sc x L
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1
NEW
Max. Rec.
Load (N)
25
25
25
25
25
30
30
30
30
30
30
35
35
35
40
40
1000
1000
1000
1000
1000
1000
1300
1300
1300
1300
1300
1300
1300
1300
2200
2200
T
W
M8/M10
Sc
d
L
B2
DIN EN
135011:E
2
- 50°/+110°
www.erico.com
11/15/07
1:55 PM
Page 3
CADDY® MACROFIX 250 M8/M10
2 screw pipe clip with M8/M10 combi boss
with DIN 4109, average degree of improvement: 20dB
• M6 multi-function screw with hexagonal combination head
(slot & crosshead), c/w retaining washer
• For pipe diameter from 12 mm to 168 mm
596460
596470
596480
596490
596500
596510
595860
595870
595880
595885
596450
595890
595900
595910
595920
595930
595940
595950
595955
595960
595970
Ø
(in)
d
(mm)
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
12-15
15-19
20-24
25-30
32-37
40-45
48-53
54-58
59-63
62-64
68-73
75-80
82-86
89-91
95-103
108-116
121-127
135-141
146-155
159-162
165-168
2
2-1/2
3
4
5
6
WxT
(mm)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
23
23
23
23
23
23
23
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Sc x L
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Max. Rec.
Load (N)
1000
1000
1000
1000
1000
1000
1300
1300
1300
1300
1300
1300
1300
1300
1300
2200
2200
2200
2200
2200
2200
T
W
M8/M10
Sc
d
L
B2
DIN EN
135011:E
www.erico.com
3
- 50°/+110°
1
11/15/07
1:56 PM
Page 4
CADDY® MACROFIX 240LF
2 screw pipe clip with M8/M10 combi boss for HDPE pipe
1
NEW
• HDPE pipes from 16 mm to 160 mm
• Easy-to-install closing mechanism
• Multi-function screws with hexagonal combination
head (slot & crosshead)
• Special rubber lining for plastic pipes to allow expansion
or contraction of the pipe
• Plastic washers between the flanges for adjusting the
pipe clamp as a fixpoint or slide
• Up to 1500 (N) load capacity
• Suits M8/M10 rod
• EPDM rubber insulation for sound reduction compliant DIN 4109,
average degree of improvement: 19dB
• Temperature range from -50°C to +100°C
• Fire rating DIN EN 13501-1:E
Nom.
Actual Pipe
Pipe Size OD (mm)
595035
595036
595037
595038
595039
595040
595041
595042
595043
595044
595045
595046
595047
595048
10
15
20
25
32
40
16
20
25
32
40
50
56
63
75
90
110
125
140
160
50
65
80
100
125
150
D
(mm)
14-19
18-23
23-28
30-35
38-43
48-53
54-59
60-66
73-78
88-93
108-113
123-128
138-143
158-163
WxT
(mm)
20
20
20
20
20
20
20
20
20
20
23
23
23
23
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Sc x L
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
25
25
25
25
25
30
30
30
30
30
40
40
40
40
Max. Rec.
Load (N)
900
900
900
900
900
900
900
900
900
900
1500
1500
1500
1500
M8/M10
Sc
d
L
T
B2
DIN EN
135011:E
W
- 50°/+110°
4
www.erico.com
11/15/07
1:56 PM
Page 5
1
HDPCI
Suspended steel pipe services
• Steel pipes from 15 mm to 250 mm
• Multi-function screws with hexagonal/slotted combination
head (up to 100)
• Fillet welded connector nut
• Fastener nuts spot welded
DIN 4109, average degree of improvement: 22dB
• Temperature range from -50°C to +110°C
• Up to 10000 (N) load capacity
Nom.
Actual Pipe
Pipe Size OD (mm)
577034
577035
577037
577038
577039
577041
577043
577045
577048
577052
577055
577061
577066
15
20
25
32
40
50
65
80
100
125
150
200
250
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
165.1
219.1
273
d
(mm)
19 - 23
24 - 28
33 - 37
40 - 45
47 - 52
60 - 65
73 - 78
88 - 93
108 - 116
138 - 145
165 - 171
219 - 225
265- 273
WxT
(mm)
30
30
30
30
30
30
30
30
30
40
40
40
40
x
x
x
x
x
x
x
x
x
x
x
x
x
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
4.0
4.0
4.0
4.0
NEW
RS
Sc x L
Max. Rec.
Load (N)
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M10/M12
M10/M12
M10/M12
M12/M16
M12/M16
M16/M20
M16/M20
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M8 x 40
M8 x 40
M8 x 40
M8 x 40
M10 x 40
M10 x 40
M12 x 40
M12 x 40
2000
2000
2000
2000
2000
2000
3500
3500
3500
5000
5000
8500
10000
RS
Sc
d
T
B
B2
DIN EN
135011:E
www.erico.com
5
- 50°/+110°
L
11/15/07
6
1:56 PM
Page 6
www.erico.com
11/15/07
1:56 PM
Page 7
2
Page 9
Page 10
Page 10
250
ADJ - Steel
ADJ - Steel
Page 12
Page 13
Page 14
ADJ - PVC
NUT - Copper
NUT - PVC
Page 15
Page 16
Page 17
SAD - Copper
SAD - Steel
SAD - PVC
Page 18
Page 19
Page 20
SOB - PVC
TPC - Copper
TPC - Steel
www.erico.com
7
Page 11
ADJ - Copper
Page 14
PNG - PVC
Page 18
SOB - Copper
Page 21
TPC - PVC
11/15/07
1:56 PM
Page 8
2
NEW
Page 21
Page 22
Page 22
TPC - PVC
TPC - FRC
HDPC
8
www.erico.com
11/15/07
1:56 PM
Page 9
2
CADDY® MACROFIX 250 M8/M10
2 screw pipe clip with M8/M10 boss
• Multi-function screw with hexagonal combination head
• Closed cap nut helps prevent rod damage to hanger
596220
596230
596250
596260
596270
596280
596290
596300
596310
596320
596360
596380
596410
Ø
(in)
d
(mm)
1/2
3/4
1
1-1/4
1-1/2
2
20-26
23-30
33-40
41-47
48-54
56-62
62-69
67-71
69-78
85-91
108-116
129-140
159-168
2-1/2
3
4
6
WxT
(mm)
20
20
20
20
20
20
20
20
20
20
23
23
23
x
x
x
x
x
x
x
x
x
x
x
x
x
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
Sc x L
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
x
x
x
x
x
x
x
x
x
x
x
x
x
20
20
20
20
25
25
25
25
25
25
25
25
25
Max. Rec.
Load (N)
1000
1000
1000
1000
1000
1300
1300
1300
1300
1300
1300
2200
2200
T
W
M8/M10
Sc
d
www.erico.com
9
L
11/15/07
1:56 PM
Page 10
2
Adjustable Clamp - ADJ for Steel Pipe
Suspend horizontal & vertical pipe services
•
•
•
•
•
Adjustable bracket sizes 15 nb to 150 nb
Adjustable yoke 48 mm to 65 mm
Double bolted
T
Suits up to M8 rod
Finish: Hot dip galvanised (HDG)
B
RS
W
ADJ-015-GWIR-HDG
ADJ-020-GWIR-HDG
ADJ-025-GWIR-HDG
ADJ-032-GWIR-HDG
ADJ-040-GWIR-HDG
ADJ-050-GWIR-HDG
ADJ-065-GWIR-HDG
ADJ-080-GWIR-HDG
ADJ-100-GWIR-HDG
ADJ-125-GWIR-HDG
ADJ-150-GWIR-HDG
Pipe Size
(nb)
Actual Pipe
OD (mm)
RS
15
20
25
32
40
50
65
80
100
125
150
21.3
26.9
33.7
42.3
48.3
60.3
76.1
88.9
113.3
140
165
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
WxT
(mm)
20
20
20
20
20
20
20
20
20
20
20
x
x
x
x
x
x
x
x
x
x
x
B
(mm)
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
80
86
93
101
107
119
135
148
173
199
225
Fastener Max. Rec.
Load (N)
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
x
x
x
x
x
x
x
x
x
x
x
25
25
25
25
25
25
25
25
25
25
25
1500
1500
1500
1500
1500
1500
1500
1500
2500
4000
4000
Adjustable Clamp - ADJ for P/PVC Pipe
• Adjustable Bracket sizes 15 mm to 100 mm
• Adjustable yoke 48 mm to 65 mm
• Double bolted
T
• Suits up to M8 rod
• Finish: Polyester Powder
Coating (PPC) White
RS
B
W
ADJ-015-PPVC-PPC
ADJ-025-PPVC-PPC
ADJ-032-PPVC-PPC
ADJ-050-PPVC-PPC
ADJ-080-PPVC-PPC
ADJ-100-PPVC-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
RS
15
25
32
50
80
100
21.3
33.4
42.2
60.3
88.9
114.3
M8
M8
M8
M8
M8
M8
10
WxT
(mm)
20
20
20
20
20
20
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
B
(mm)
80
92
101
119
148
173
Fastener Max. Rec.
Load (N)
M8
M8
M8
M8
M8
M8
x
x
x
x
x
x
25
25
25
25
25
25
1500
1500
1500
1500
1500
1500
www.erico.com
11/15/07
1:56 PM
Page 11
2
Adjustable Clamp - ADJ for Copper Pipe
• Adjustable bracket sizes 20 mm to 300 mm
• Double bolted
• Closed cap nut helps prevent rod damage to hanger
• Finish: Polyester powder coating (PPC) brown
or hot dip galvanised (HDG)
Pipe Size Actual Pipe
(mm)
OD (mm)
PPC
ADJ-020-CU-PPC
ADJ-025-CU-PPC
ADJ-032-CU-PPC
ADJ-040-CU-PPC
ADJ-050-CU-PPC
ADJ-065-CU-PPC
ADJ-080-CU-PPC
ADJ-100-CU-PPC
ADJ-125-CU-PPC
ADJ-150-CU-PPC
HDG
ADJ-020-CU-HDG
ADJ-025-CU-HDG
ADJ-032-CU-HDG
ADJ-040-CU-HDG
ADJ-050-CU-HDG
ADJ-065-CU-HDG
ADJ-080-CU-HDG
ADJ-100-CU-HDG
ADJ-125-CU-HDG
ADJ-150-CU-HDG
ADJ-200-CU-HDG
ADJ-250-CU-HDG
ADJ-300-CU-HDG
20
25
32
40
50
65
80
100
125
150
200
250
300
19
25.4
31.8
38.1
51.2
63.5
76.2
101.6
127
152.4
203.2
254
304
RS
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M12
M12
M12
WxT
(mm)
20
20
20
20
20
20
20
20
25
25
40
40
40
x
x
x
x
x
x
x
x
x
x
x
x
x
B
(mm)
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
5.0
78
84
91
97
110
123
135
161
186
211
299
350
399
Fastener Max. Rec.
Load (N)
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M12 x 50
M12 x 50
M12 x 50
1500
1500
1500
1500
1500
1500
1500
1500
1500
2500
4000
6000
6000
RS
T
W
www.erico.com
11
B
11/15/07
1:56 PM
Page 12
2
Adjustable Clamp - ADJ for PVC Pipe
• Adjustable bracket sizes 40 mm to 300 mm
• Double bolted
• Finish: Polyester powder coating (PPC) white
or hot dip galvanised (HDG)
(mm)
OD (mm)
PPC
ADJ-040-PVC-PPC
ADJ-050-PVC-PPC
ADJ-065-PVC-PPC
ADJ-080-PVC-PPC
ADJ-100-PVC-PPC
ADJ-150-PVC-PPC
ADJ-225-PVC-PPC
ADJ-300-PVC-PPC
HDG
ADJ-040-PVC-HDG
ADJ-050-PVC-HDG
ADJ-065-PVC-HDG
ADJ-080-PVC-HDG
ADJ-090-PVC-HDG
ADJ-100-PVC-HDG
ADJ-150-PVC-HDG
ADJ-225-PVC-HDG
ADJ-300-PVC-HDG
40
50
65
80
90
100
150
225
300
43
55
69
82
90
110
160
251
316
RS
M8
M8
M8
M8
M8
M8
M8
M12
M12
WxT
(mm)
20
20
20
20
20
20
25
40
40
x
x
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
B
Fastener Max. Rec.
(mm)
Load (N)
102
114
128
141
149
169
219
346
411
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M12 x 50
M12 x 50
1500
1500
1500
1500
1500
1500
1500
6000
7500
RS
T
B
W
12
www.erico.com
11/15/07
1:56 PM
Page 13
2
Nut Clip - NUT for Copper Pipe
Suspended pipe services
•
•
•
•
•
Nut Clip sizes 15 mm to 150 mm
Cup head fastener
Doubled bolted
Suits M10 rod
Finish: Polyester powder coating (PPC) brown
NUT-015-CU-PPC
NUT-020-CU-PPC
NUT-025-CU-PPC
NUT-032-CU-PPC
NUT-040-CU-PPC
NUT-050-CU-PPC
NUT-065-CU-PPC
NUT-080-CU-PPC
NUT-100-CU-PPC
NUT-125-CU-PPC
NUT-150-CU-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
15
20
25
32
40
50
65
80
100
125
150
12.7
19
25.4
31.8
38.1
51.2
63.5
76.2
101.6
127
152.4
WxT
(mm)
20
20
20
20
20
20
20
20
20
25
25
x
x
x
x
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
H
(mm)
Fastener
(Imperial)
Max. Rec.
Load (N)
44
50
56
63
69
82
95
107
133
158
187
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
5/16 x 1
5/16 x 1
5/16 x 1
1500
1500
1500
1500
1500
1500
1500
1500
1500
2500
2500
W
T
www.erico.com
13
H
11/15/07
1:56 PM
Page 14
2
Nut Clip - NUT for PVC Pipe
Suspended pipe services
• Nut clip sizes 40 mm to 150 mm
• Cup head fastener
T
• Doubled bolted
• Suits M10 rod
• Finish: Polyester powder
coating (PPC) white
H
W
Pipe Size
(mm)
Actual Pipe
OD (mm)
40
50
65
80
90
100
150
43
55
69
82
90
110
160
NUT-040-PVC-PPC
NUT-050-PVC-PPC
NUT-065-PVC-PPC
NUT-080-PVC-PPC
NUT-090-PVC-PPC
NUT-100-PVC-PPC
NUT-150-PVC-PPC
WxT
(mm)
20
20
20
20
20
20
25
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
H
(mm)
74
86
100
113
121
141
191
Surface Fastener Max. Rec.
Finish (Imperial) Load (N)
PPC
PPC
PPC
PPC
PPC
PPC
PPC
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
5/16 x 1
5/16 x 1
5/16 x 1
1500
1500
1500
1500
1500
1500
1500
B
(mm)
RS
Surface Max. Rec.
Finish
Load (N)
78
96
111
131
170
230
391
493
M10
M10
M10
M12
M12
M12
M12
M12
Pear hanging Clip - PNG for PVC Pipe
Suspended pipe services - Variable
RS
• Pear clip sizes 40 mm to 300 mm
• Finish: Polyester powder coating
(PPC) white
T
B
W
PNG-040-PVC-PPC
PNG-050-PVC-PPC
PNG-065-PVC-PPC
PNG-080-PVC-PPC
PNG-100-PVC-PPC
PNG-150-PVC-PPC
PNG-225-PVC-PPC
PNG-300-PVC-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
40
50
65
80
100
150
225
300
43
55
69
82
110
160
250
315
WxT
(mm)
25
25
25
28
28
32
32
32
14
x
x
x
x
x
x
x
x
1.6
1.6
1.6
2.2
2.2
3.2
3.2
3.4
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
1500
1500
1500
1500
1500
1500
6000
7500
www.erico.com
11/15/07
1:56 PM
Page 15
2
Saddle Clamp - SAD for Copper Pipe
Light duty support for Copper tubing
•
•
•
•
Copper saddle sizes 15 mm to 150 mm
Attaches directly to horizontal or vertical structural member
Fixes pipe directly to wall or ceiling
Finish: Polyester powder coating (PPC) brown
NOTE: Follow fastener manufacturer’s recommended
shear and pull-out strength when fastening to the structure.
SAD-015-CU-PPC
SAD-020-CU-PPC
SAD-025-CU-PPC
SAD-032-CU-PPC
SAD-040-CU-PPC
SAD-050-CU-PPC
SAD-065-CU-PPC
SAD-080-CU-PPC
SAD-100-CU-PPC
SAD-150-CU-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
15
20
25
32
40
50
65
80
100
150
12.7
19
25.4
31.8
38.1
51.2
63.5
76.2
101.6
152.4
WxT
(mm)
25
25
25
25
25
25
25
25
25
25
x
x
x
x
x
x
x
x
x
x
1.3
1.3
1.3
1.6
3.0
3.0
3.0
3.0
3.0
3.0
L
(mm)
HS
(mm)
Max. Rec.
Load (N)
54
61
67
74
98
111
124
136
170
212
8
8
8
8
10
10
10
10
10
10
1500
1500
1500
1500
1500
1500
1500
1500
1500
2500
HS
W
T
L
www.erico.com
15
11/15/07
1:56 PM
Page 16
2
Saddle Clamp - SAD for Steel Pipe
Light & Medium duty support for Steel pipe
•
•
•
•
Steel saddle sizes 20 nb to 250 nb
SAD-020-GWIR-HDG
SAD-025-GWIR-HDG
SAD-032-GWIR-HDG
SAD-040-GWIR-HDG
SAD-050-GWIR-HDG
SAD-065-GWIR-HDG
SAD-080-GWIR-HDG
SAD-100-GWIR-HDG
SAD-150-GWIR-HDG
SAD-200-GWIR-HDG
SAD-250-GWIR-HDG
Pipe Size
(nb)
Actual Pipe
OD (mm)
20
25
32
40
50
65
80
100
150
200
250
26.7
33.7
42.4
48.3
60.3
76.1
88.9
113.3
165.1
219
273
WxT
(mm)
25
25
25
25
25
25
25
25
25
40
40
x
x
x
x
x
x
x
x
x
x
x
1.3
1.3
1.6
3.0
3.0
3.0
3.0
3.0
3.0
6.0
6.0
L
(mm)
HS
(mm)
Max. Rec.
Load (N)
69
75
85
108
121
136
149
173
225
315
369
8
8
8
10
10
10
10
10
10
14
14
1500
1500
1500
1500
1500
1500
1500
2500
4000
6000
7500
HS
W
T
L
16
www.erico.com
11/15/07
1:56 PM
Page 17
2
Saddle Clamp - SAD for PVC Pipe
Light & Medium duty support for PVC pipe
•
•
•
•
PVC saddle sizes 40 mm to 300 mm
Finish: Polyester powder coating (PPC) white
SAD-040-PVC-PPC
SAD-050-PVC-PPC
SAD-065-PVC-PPC
SAD-080-PVC-PPC
SAD-090-PVC-PPC
SAD-100-PVC-PPC
SAD-150-PVC-PPC
SAD-225-PVC-PPC
SAD-300-PVC-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
40
50
65
80
90
100
150
225
300
43
55
69
82
90
110
160
251
316
WxT
(mm)
25
25
25
25
25
25
25
40
40
x
x
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
6.0
6.0
L
(mm)
HS
(mm)
Max. Rec.
Load (N)
103
111
129
142
150
170
220
346
411
10
10
10
10
10
10
10
14
14
1500
1500
1500
1500
1500
1500
1500
6000
7500
HS
W
T
L
www.erico.com
17
11/15/07
1:57 PM
Page 18
2
Stand off Bracket - SOB for Copper Pipe
Stand off bracket for vertical pipe services
• Stand off bracket sizes 40 mm to 150 mm
• Attaches directly to horizontal
T
or vertical structural member
• Double bolted
coating (PPC) brown
NOTE: Follow fastener manufacturer’s
recommended shear and pull-out
strength when fastening to the
structure.
SOB-040-CU-PPC
SOB-050-CU-PPC
SOB-065-CU-PPC
SOB-080-CU-PPC
SOB-100-CU-PPC
SOB-125-CU-PPC
SOB-150-CU-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
40
50
65
80
90
100
150
38.1
51.2
63.5
76.2
101.6
127
152.4
L
HS
W
WxT
(mm)
20
20
20
20
20
25
25
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
L
(mm)
HS
(mm)
93
110
119
131
157
185
210
10
10
10
10
10
10
10
Fastener Max. Rec.
Load (N)
M8
M8
M8
M8
M8
M8
M8
x
x
x
x
x
x
x
25
25
25
25
25
25
25
1500
1500
1500
1500
1500
1500
2500
Stand off Bracket - SOB for PVC Pipe
Stand off bracket for vertical pipe services
• Stand off bracket sizes 40 mm to 300 mm
• Attaches directly to horizontal
T
or vertical structural member
• Double bolted
coating (PPC) white
L
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength
when fastening to the structure.
SOB-040-PVC-PPC
SOB-050-PVC-PPC
SOB-065-PVC-PPC
SOB-080-PVC-PPC
SOB-090-PVC-PPC
SOB-100-PVC-PPC
SOB-150-PVC-PPC
SOB-225-PVC-PPC
SOB-300-PVC-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
40
50
65
80
90
100
150
225
300
43
55
69
82
90
110
160
251
316
HS
W
WxT
(mm)
20
20
20
20
20
20
25
40
40
x
x
x
x
x
x
x
x
x
L
(mm)
HS
(mm)
Fastener Max. Rec.
Load (N)
3.0
3.0
3.0
3.0
3.0
3.0
3.0
6.0
6.0
98
110
124
137
145
165
220
368
435
10
10
10
10
10
10
10
13.5
13.5
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M12 x 40
M12 x 40
18
www.erico.com
1500
1500
1500
1500
1500
1500
1500
6000
7500
11/15/07
1:57 PM
Page 19
2
Two Piece Clamp - TPC for Copper Pipe
Fastening of vertical & horizontal pipe services
• Two piece bracket sizes 20 mm to 300 mm
• Double bolted
• Finish: Polyester powder coating (PPC) brown or
hot dip galvanised (HDG)
(mm)
OD (mm)
PPC
TPC-020-CU-PPC
TPC-025-CU-PPC
TPC-032-CU-PPC
TPC-040-CU-PPC
TPC-050-CU-PPC
TPC-065-CU-PPC
TPC-080-CU-PPC
TPC-100-CU-PPC
TPC-125-CU-PPC
TPC-150-CU-PPC
TPC-200-CU-PPC
WxT
(mm)
L
Fastener Max. Rec.
(mm)
Load (N)
HDG
TPC-250-CU-HDG
TPC-300-CU-HDG
20
25
32
40
50
65
80
100
125
150
200
250
300
19
25.4
31.8
38.1
51.2
63.5
76.2
101.6
127
152.4
203.2
254
304
20
20
20
20
20
20
20
20
25
25
40
40
40
x
x
x
x
x
x
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
6.0
6.0
6.0
74
80.5
87
93
106
119
131
157
185
210
317
371
411
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M12 x 40
M12 x 40
M12 x 40
1500
1500
1500
1500
1500
1500
1500
1500
1500
2500
4000
6000
6000
W
L
T
www.erico.com
19
11/15/07
1:57 PM
Page 20
2
Two Piece Clamp - TPC for Steel Pipe
• Two piece bracket sizes 15 nb to 150 nb
• Double bolted
• Finish: Hot dip galvanised (HDG)
TPC-015-GWIR-HDG
TPC-020-GWIR-HDG
TPC-025-GWIR-HDG
TPC-032-GWIR-HDG
TPC-040-GWIR-HDG
TPC-050-GWIR-HDG
TPC-065-GWIR-HDG
TPC-080-GWIR-HDG
TPC-100-GWIR-HDG
TPC-125-GWIR-HDG
TPC-150-GWIR-HDG
Pipe Size
(nb)
Actual Pipe
OD (mm)
15
20
25
32
40
50
65
80
100
125
150
21.3
26.9
33.7
42.3
48.3
60.3
76.1
88.9
113.3
140
165.1
WxT
(mm)
20
20
20
20
20
20
20
20
20
25
25
x
x
x
x
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
L
(mm)
76
82
89
98
103
115
131
144
172
195
220
Fastener Max. Rec.
Load (N)
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
x
x
x
x
x
x
x
x
x
x
x
25
25
25
25
25
25
25
25
25
25
25
1500
1500
1500
1500
1500
1500
1500
1500
2500
4000
4000
W
L
T
20
www.erico.com
11/15/07
1:57 PM
Page 21
Two Piece Clamp - TPC for Pressure PVC Pipe
• Double bolted
L
T
W
TPC-020-PPVC-PPC
TPC-025-PPVC-PPC
TPC-032-PPVC-PPC
TPC-040-PPVC-PPC
TPC-050-PPVC-PPC
TPC-080-PPVC-PPC
TPC-100-PPVC-PPC
Pipe Size
(mm)
Actual Pipe
OD (mm)
20
25
32
40
50
80
100
26.7
33.4
42.2
48.2
60.3
88.9
114.3
WxT
(mm)
20
20
20
20
20
20
20
x
x
x
x
x
x
x
L
(mm)
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Fastener Max. Rec.
Load (N)
82
89
98
103
115
144
172
M8
M8
M8
M8
M8
M8
M8
x
x
x
x
x
x
x
25
25
25
25
25
25
25
1500
1500
1500
1500
1500
1500
1500
Two Piece Clamp - TPC for PVC Pipe
• Double bolted
• Finish: Polyester powder coating (PPC)
white or hot dip galvanised (HDG)
L
T
W
PPC
HDG
TPC-040-PVC-PPC
TPC-050-PVC-PPC
TPC-065-PVC-PPC
TPC-080-PVC-PPC
TPC-100-PVC-PPC
TPC-150-PVC-PPC
TPC-225-PVC-PPC TPC-225-PVC-HDG
TPC-300-PVC-PPC TPC-300-PVC-HDG
TPC-375-PVC-HDG
Pipe
Size
(mm)
40
50
65
80
100
150
225
300
375
Actual
Pipe
OD
(mm)
43
55
69
82
110
160
250
316
401
www.erico.com
WxT
(mm)
20
20
20
20
20
25
40
40
40
21
x
x
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
6.0
L
Fastener Max. Rec.
(mm)
Load (N)
98
115
124
144
165
220
368
435
530
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M8 x 25
M12 x 40
M12 x 40
M12 x 40
1500
1500
1500
1500
1500
1500
6000
7500
9000
2
11/15/07
1:57 PM
Page 22
2
Two Piece Clamp - TPC for Fiber Reinforced
Concrete Pipe (FRC)
L
Fastening of vertical &
horizontal pipe services
T
• Two piece bracket sizes 225 mm
to 450 mm
• Double bolted medium duty
W
TPC-225-FRC-HDG
TPC-300-FRC-HDG
TPC-375-FRC-HDG
TPC-450-FRC-HDG
Pipe Size
(mm)
Actual Pipe
OD (mm)
225
300
375
450
277
358
438
527
WxT
(mm)
40
40
50
50
HDPC
x
x
x
x
6.0
6.0
8.0
8.0
388
470
565
655
Max. Rec.
Load (N)
Fastener
M12
M12
M16
M16
x
x
x
x
40
40
50
50
contact factory
contact factory
contact factory
contact factory
M8/M10
• Multi-function screws with
hexagonal/slotted combination head
• Flared steel band, also suitable for
plastic pipes
• Up to 10000(N) load capacity
• FM and VdS approved
• Hinged version up to 100
Nom. Actual Pipe
Pipe Size OD (mm)
577002
577003
577004
577006
577007
577009
577011
577013
577016
577020
577022
577028
577032
L
(mm)
15
20
25
32
40
50
65
80
100
125
150
200
250
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
165.1
219.1
273
d
(mm)
20
25
31
40
48
60
76
88
110
140
159
219
267
-
24
30
35
45
53
65
81
94
116
146
165
226
273
Sc
d
T
NEW
L
W
WxT
(mm)
30
30
30
30
30
30
30
30
30
40
40
40
40
x
x
x
x
x
x
x
x
x
x
x
x
x
Surface Connector
Finish
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
4.0
4.0
4.0
4.0
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
22
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M10/M12
M10/M12
M10/M12
M12/M16
M12/M16
M12/M16
M16/M20
Sc x L
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M8 x 40
M8 x 40
M8 x 40
M10 x 40
M10 x 40
M10 x 40
M12 x 40
Max. Rec. Approvals
Load (N)
2000
2000
2000
2000
2000
2000
3500
3500
3500
5000
5000
8500
10000
VdS
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS
VdS / FM
VdS / FM
www.erico.com
11/15/07
1:57 PM
Page 23
3
SPRINKLER SUPPORTS
STEEL PIPE
NEW
NEW
NEW
Page 24
Page 25
Page 26
Page 27
EPB
FCN
CNC
HDPC
NEW
NEW
Page 28
Page 29
Page 30
Page 31
401
CADDY SLOT LOCK
CADDY EZ RISER
CDS
®
®
NEW
NEW
Page 31
Page 32
Page 32
Page 33
CLS
CTC
ERIC1
U-bolt
CPVC
NEW
NEW
NEW
NEW
Page 34
Page 35
Page 36
Page 37
107
108
109
SO
www.erico.com
23
11/15/07
1:57 PM
Page 24
SPRINKLER SUPPORTS
3
Pear Bands - EPB for Steel Pipe
Horizontal suspended steel pipe services
• EPB hanger for sizes 27 mm to 219 mm
• FM approved
EPB 27
EPB 34
EPB 43
EPB 48
EPB 60
EPB 76
EPB 89
EPB 114
EPB 165
EPB 220
Pipe Size
(nb)
Actual Pipe
OD (mm)
20
25
32
40
50
65
80
100
150
200
27
34
43
48
60
76
89
113
165
219
WxT
(mm)
25
25
25
25
25
28
28
30
32
40
x
x
x
x
x
x
x
x
x
x
1.6
1.6
1.6
1.6
1.6
2.2
2.2
3.2
3.2
3.2
RS
Max. Rec.
Load (N)
M10
M10
M10
M10
M10
M12
M12
M12
M12
M16
1330
1330
1330
1330
1330
2340
2340
2890
4450
6000
RS
T
W
24
www.erico.com
11/15/07
1:57 PM
Page 25
3
SPRINKLER SUPPORTS
SWIVEL LOOP HANGER FCN (115)
NEW
Heavy Duty Adjustable Band Hanger
• Size range: 15 mm to 200 mm
• Recommended for the suspension of stationary
non-insulated pipe lines
• Features a retained insert nut to ensure that the
loop hanger and insert nut stay together
Note: Imperial sizes available
upon special request
RS
B
A
Item
No.
597860
597870
597880
597890
597900
597910
597920
597930
597940
597950
597960
597970
-
115M0050EG
1150050EG
115M0075EG
1150075EG
115M0100EG
1150100EG
115M0125EG
1150125EG
115M0150EG
1150150EG
115M0200EG
1150200EG
115M0250EG
1150250EG
115M0300EG
1150300EG
115M0400EG
1150400EG
115M0500EG
1150500EG
115M0600EG
1150600EG
115M0800EG
1150800EG
20 mm - 200 mm
15 mm - 200 mm
Nominal Steel
Pipe Size
mm
(in)
Pipe OD
mm
(in)
RS
Metric
(in)
A
mm
(in)
B
mm
(in)
Max. Rec.
Load (N)
(lbs)
15
(1/2)
20
(3/4)
25
(1)
32
(1-1/4)
40
(1-1/2)
50
(2)
65
(2-1/2)
80
(3)
100
(4)
125
(5)
150
(6)
200
(8)
21
(0.840)
27
(1.050)
34
(1.315)
43
(1.660)
48
(1.900)
60
(2.375)
76
(2.875)
89
(3.500)
114
(4.500)
140
(5.563)
165
(6.625)
219
(8.625)
M10
(3/8)
M10
(3/8)
M10
(3/8)
M10
(3/8)
M10
(3/8)
M10
(3/8)
M10
(3/8)
M10
(3/8)
M10
(3/8)
M12
(1/2)
M12
(1/2)
M12
(1/2)
70
(2-3/4)
78
(3-1/16)
84
(3-5/16)
90
(3-9/16)
97
(3-13/16)
108
(4-1/4)
140
(5-1/2)
165
(6-1/2)
191
(7-1/2)
232
(9-1/8)
286
(11-1/4)
325
(12-13/16)
25
(1)
25
(1)
25
(1)
25
(1)
25
(1)
25
(1)
25
(1)
25
(1)
25
(1)
32
(1-1/4)
32
(1-1/4)
32
(1-1/4)
1330
(300)
1330
(300)
1330
(300)
1330
(300)
1330
(300)
1330
(300)
2340
(525)
2340
(525)
2890
(650)
4450
(1000)
4450
(1000)
4450
(1000)
www.erico.com
25
11/15/07
1:57 PM
Page 26
SPRINKLER SUPPORTS
3
CNC Nut Clip - CNC for Steel Pipe
Suspended sprinkler fire pipe services
•
•
•
•
•
•
Nut Clip sizes 20 nb to 150 nb
Cup head fastener
Doubled bolted
Up to 4000 (N) load capacity
Available in M10 and M12
Finish: Electro-zinc plated (EG)
(nb)
OD (mm)
RS=M10
CNC 20
CNC 25
CNC 32
CNC 40
CNC 50
CNC 65
CNC 80
CNC 100
CNC 125
CNC 150
WxT
(mm)
Fastener
(Imperial)
Max. Rec.
Load (N)
M10/M12
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
5/16 x 1
5/16 x 1
5/16 x 1
1500
1500
1500
1500
1500
1500/1500
1500/1500
2500/2500
2500/4000
4000/4000
RS=M12
CNC 65 M12
CNC 80 M12
CNC 100 M12
CNC 125 M12
CNC 150 M12
20
25
32
40
50
65
80
100
125
150
26.9
33.7
42.4
48.3
60.3
76.1
88.9
113.3
139.7
165.1
20
20
20
20
20
20
20
25
25
25
x
x
x
x
x
x
x
x
x
x
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
5.0
RS
T
W
26
www.erico.com
11/15/07
1:57 PM
Page 27
3
SPRINKLER SUPPORTS
HDPC NI
• Multi-function screws with hexagonal combination head
(slot on sizes up to 100)
• Flared steel band, also suitable for
plastic pipes
• Up to 10000(N) load capacity
• Hinged version up to 100
Nom. Actual Pipe
Pipe Size OD (mm)
577002
577003
577004
577006
577007
577009
577011
577013
577016
577020
577022
577028
577032
15
20
25
32
40
50
65
80
100
125
150
200
250
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
165.1
219.1
273
d
(mm)
20
25
31
40
48
60
76
88
110
140
159
219
267
-
24
30
35
45
53
65
81
94
116
146
165
226
273
WxT
(mm)
30
30
30
30
30
30
30
30
30
40
40
40
40
x
x
x
x
x
x
x
x
x
x
x
x
x
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
4.0
4.0
4.0
4.0
NEW
Surface Connector
Finish
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M10/M12
M10/M12
M10/M12
M12/M16
M12/M16
M12/M16
M16/M20
Sc x L
Max. Rec. Approvals
Load (N)
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M6 x 30
M8 x 40
M8 x 40
M8 x 40
M10 x 40
M10 x 40
M10 x 40
M12 x 40
2000
2000
2000
2000
2000
2000
3500
3500
3500
5000
5000
8500
10000
VdS
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS / FM
VdS
VdS / FM
VdS / FM
M8/M10
Sc
T
d
W
www.erico.com
27
L
11/15/07
1:57 PM
Page 28
SPRINKLER SUPPORTS
3
CLEVIS HANGER 401
NEW
Standard Duty
65 - 200 mm
Item
No.
179398
179399
179420
179421
179422
179423
179424
179425
179426
179427
179428
179429
179430
179431
179432
179433
179434
179435
179436
4010050EG
4010075EG
4010100EG
4010125EG
4010150EG
4010200EG
4010250EGAU
4010300EG
4010400EG
4010500EG
4010600EG
4010800EG
4011000EG
4011200EG
4011400EG
4011600EG
4011800EG
4012000EG
4012400EG
Nominal
Steel Pipe
Size
(mm)
Pipe
OD
(mm)
RS
Metric
A
(mm)
B
(mm)
Max.
Rec.
Load
(N)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
100 (4")
125 (5")
150 (6")
200 (8")
250 (10")
300 (12")
350 (14")
400 (16")
450 (18")
500 (20")
600 (24")
21
27
34
43
48
60
76
89
114
140
165
219
273
324
356
406
457
508
610
M10
M10
M10
M10
M10
M10
M12
M12
M16
M16
M20
M20
M20
M20
M24
M24
M28
M32
M32
54
61
79
84
100
114
133
152
197
248
298
356
419
473
552
609
680
762
867
41
45
52
61
75
83
95
105
137
173
209
241
276
305
368
400
444
498
552
2700
2700
2700
2700
2700
2700
5000
5000
5000
6400
8600
8900
16000
17000
18700
20500
21400
21400
21400
RS
B
A
28
www.erico.com
11/15/07
1:57 PM
Page 29
3
SPRINKLER SUPPORTS
CADDY® SLOT LOCK
NEW
Standard Duty
• Size range: 15 mm and 200 mm
• Slotted crossbeam design is easier to assemble
than conventional nut and bolt style clevis hangers
• Eliminates the need to install additional parts to
control deflection
Item
No.
178300
178301
178302
178303
178304
178305
178306
178307
178308
178309
178310
178311
4270050EG
4270075EG
4270100EG
4270125EG
4270150EG
4270200EG
4270250EGAU
4270300EG
4270400EG
4270500EG
4270600EG
4270800EG
Nominal
Steel Pipe
Size
(mm)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
100 (4")
125 (5")
150 (6")
200 (8")
Pipe
OD
(mm)
RS
Metric
A
(mm)
B
(mm)
21
27
34
43
48
60
76
89
114
140
165
219
M10
M10
M10
M10
M10
M10
M12
M12
M16
M16
M20
M20
69
80
87
96
107
123
138
161
203
249
291
358
56
64
68
72
80
90
98
113
142
174
202
243
Max.
Rec.
Load
(N)
2700
2700
2700
2700
2700
2700
5000
5000
5000
6400
8600
8900
Features
• UL® Listed and FM approved
• Each assembly comes individually bagged, ready to assemble
• Patent-pending slotted crossbeam design is easier and faster to assemble
than conventional nut and bolt style hangers
• Notches in the crossbeam capture the top and bottom legs under load,
minimizing deflection
• Meets FM deflection requirements without the need to install
additional parts
• Has successfully passed the rigorous vibration testing requirements
for both UL and FM
B
A
“The CADDY® SLOT LOCK
Hanger is UL Listed under
UL 203 for fire protection
applications”
www.erico.com
29
11/15/07
1:58 PM
Page 30
SPRINKLER SUPPORTS
3
CADDY® EZ RISER
NEW
Vertical Pipe Support
• Recommended for supporting vertical steel pipe risers
• Slotted holes make assembly a snap – no fumbling
with loose hardware
• Bolts are accessible from the front, serrated washer head
design means no wrench required on back side for tightening
NOTE: Clamp is fitted for steel pipe and should be
installed below a coupling or shear lug, with bolts
torqued to recommended value
Item
No.
129325
129326
129327
129328
129329
129330
129331
129332
129333
129334
129335
129336
129337
129338
129339
129340
129341
129342
129343
5100050EG
5100075EG
5100100EG
5100125EG
5100150EG
5100200EG
5100250EGAU
5100300EG
5100400EG
5100500EGAU
5100600EGAU
5100800EG
5101000EG
5101200EG
5101400EG
5101600EG
5101800EG
5102000EG
5102400EG
50 - 200 mm
Nominal
Steel Pipe
Size
mm (in)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
100 (4")
125 (5")
150 (6")
200 (8")
250 (10")
300 (12")
350 (14")
400 (16")
450 (18")
500 (20")
600 (24")
Pipe
OD
mm
(in)
21
27
34
43
48
60
76
89
114
140
165
219
273
324
356
406
457
508
610
A
mm
(in)
B
mm
(in)
HS
Metric
(in)
216
229
229
240
251
260
279
298
330
368
406
464
524
569
613
708
757
819
918
25
25
25
25
25
30
30
30
38
38
51
51
51
51
51
64
64
64
76
11
11
11
11
11
11
11
11
14
14
14
17
17
17
17
21
21
21
23
Max.
Rec.
Load
(N)
1138
1138
1138
1138
1138
1138
1736
2354
3609
5168
6992
11140
11140
12033
12033
12925
12925
12925
12925
HS
A
B
A
30
www.erico.com
11/15/07
1:58 PM
Page 31
3
SPRINKLER SUPPORTS
Deep Saddle Clip - CDS for Steel Pipe
Light duty support for steel pipe
• Steel saddle sizes 25 nb to 50 nb
• Attaches directly to horizontal or vertical structural member
NOTE: Follow fastener
manufacturer’s recommended
shear and pull-out strength
H
HS
W
L
T
CDS
CDS
CDS
CDS
25
32
40
50
Pipe Size
(nb)
Actual Pipe
OD (mm)
25
32
40
50
33.7
42.3
48.3
60.3
WxT
(mm)
25
25
25
25
x
x
x
x
1.6
1.6
1.6
1.6
L
(mm)
HS
(mm)
H
(mm)
Max. Rec.
Load (N)
69
74
79
84
8
8
8
8
69
74
79
84
1500
1500
1500
1500
Shallow Saddle Clip - CLS for Steel Pipe
Light duty support for steel pipe
•
•
•
•
Steel saddle sizes 25 nb to 65 nb
Fixes fire pipe directly to wall or ceiling
recommended shear and pull-out strength
HS
W
L
T
CLS
CLS
CLS
CLS
CLS
25
32
40
50
65
Pipe Size
(nb)
Actual Pipe
OD (mm)
25
32
40
50
65
33.7
42.3
48.3
60.3
76.1
WxT
(mm)
25
25
25
25
30
www.erico.com
x
x
x
x
x
1.6
1.6
1.6
1.6
2.0
31
L
(mm)
HS
(mm)
Max. Rec.
Load (N)
69
74
79
84
125
8
8
8
8
8
1500
1500
1500
1500
1500
11/15/07
1:58 PM
Page 32
SPRINKLER SUPPORTS
3
Twist Clip - CTC for Steel Pipe
W
Perpendicular steel pipe support
• Steel twist clip sizes 25 nb to 65 nb
• Attaches to horizontal structural member
for perpendicular pipe services
• Fixes fire pipe directly to
T
structural member
H
strength when fastening to the structure.
CTC
CTC
CTC
CTC
CTC
25
32
40
50
65
Pipe Size
(nb)
Actual Pipe
OD (mm)
25
32
40
50
65
33.7
42.3
48.3
60.3
76.1
WxT
(mm)
25
25
25
25
30
x
x
x
x
x
1.5
1.5
1.5
1.5
2.0
H
(mm)
Max. Rec.
Load (N)
85
94
100
120
138
1500
1500
1500
1500
1500
ERIC1 One Piece Clamp - ERIC1 for Steel Pipe
NEW
Support steel pipe services
• Single piece clip for sizes 25, 32, 40 nb
• One piece clip for fast and convenient
installation
strength when fastening to the structure.
T
L
S
S
W
ERIC1 - 34
ERIC1 - 43
ERIC1 - 48
Pipe Size
(nb)
Actual Pipe
OD (mm)
WxT
(mm)
L
(mm)
S
(mm)
Max. Rec.
Load (N)
25
32
40
33.7
42.4
48.3
32 x 1.2
32 x 1.2
32 x 1.2
32
32
32
11 x 11
11 x 11
11 x 11
1500
1500
1500
32
www.erico.com
11/15/07
1:58 PM
Page 33
3
SPRINKLER SUPPORTS
PIPE FIXINGS U-bolt
NEW
Standard U-bolt
•
•
•
•
Size range: 25 mm to 200 mm
Pipe support for general piping applications
Supplied with two pre-mounted nuts for each U-bolt
Finish: Electro-zinc plated (EG) & Hot Dip Galvanised (HDG)
UBOLT-M6X25
UBOLT-M6X32
UBOLT-M6X40
UBOLT-M6X50
UBOLT-M10X25
UBOLT-M10X32
UBOLT-M10X40
UBOLT-M10X50
UBOLT-M12X65
UBOLT-M12X80
UBOLT-M12X100
UBOLT-M12X150
UBOLT-M12X200
Nominal Steel
Pipe Size
ID
(mm)
RS
A
(mm)
Finish
25
32
40
50
25
32
40
50
65
80
100
150
200
34
42
48
60
34
42
48
60
76
89
114
165
219
M6
M6
M6
M6
M10
M10
M10
M10
M12
M12
M12
M12
M12
80
95
85
100
90
110
110
110
140
150
175
230
295
EG
EG
EG
EG
HDG
HDG
HDG
HDG
HDG
HDG
HDG
HDG
HDG
RS
A
www.erico.com
33
11/15/07
1:58 PM
Page 34
SPRINKLER SUPPORTS
3
CPVC PIPE FIXINGS 107
NEW
One-hole wrap around strap for CPVC pipe
•
•
•
•
Size range: 20 mm to 50 mm CPVC pipe
Supports CPVC pipe horizontally from top or side of beam
Flared edges protect the CPVC piping
Item
No.
597816
597817
597818
597819
597821
1070075EG
1070100EG
1070125EG
1070150EG
1070200EG
Nominal
Pipe
Size
(mm)
Pipe
OD
(mm)
A
(mm)
B
(mm)
Max.
Hanger
Spacing
(m)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
26.9
33.7
42.2
48.3
60.3
31.8
36.5
41.3
44.5
47.6
60.3
68.3
77.8
84.1
93.7
1.7
1.8
2.0
2.1
2.4
A
B
A
B
34
www.erico.com
11/15/07
1:58 PM
Page 35
3
SPRINKLER SUPPORTS
NEW
Two-hole Strap for CPVC Pipe
• Size range: 20 mm to 50 mm CPVC pipe
• Supports CPVC pipe horizontally from top, bottom
or side of beam
• Retainer dimples secure hanger to pipe during installation
• Flared edges protect the CPVC piping
Item
No.
597822
597823
597824
597825
597826
Nominal
Pipe
Size
(mm)
1080075EG
20 (3/4”)
1080100EG
25 (1”)
5.8 mm DIA.
1080125EG
32 (1-1/4”)
1080150EG
40 (1-1/2”)
1080200EG
50 (2”)
Pipe
OD
(mm)
A
(mm)
B
(mm)
Max.
Hanger
Spacing
(m)
26.9
33.7
B
42.2
48.3
60.3
82.6
88.9
108.0
112.7
125.4
57.2
63.5
82.6
87.3
100.0
1.7
1.8
2.0
2.1
2.4
A
5.8 mm DIA.
B
30.2 mm
A
30.2 mm
www.erico.com
35
11/15/07
1:58 PM
Page 36
SPRINKLER SUPPORTS
3
NEW
Side Mount Strap for CPVC Pipe
• Supports CPVC pipe horizontally from top or
bottom of beam
• Retainer dimples secure hanger to pipe during installation
Item
No.
597827
597828
597829
597831
597832
1090075EG
1090100EG
1090125EG
1090150EG
1090200EG
Nominal
Steel Pipe
Size
(mm)
Pipe
OD
(mm)
A
(mm)
B
(mm)
Max.
Hanger
Spacing
(m)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
26.9
33.7
42.2
48.3
60.3
58.7
66.7
74.6
81.0
92.1
42.9
49.2
58.7
63.5
76.2
1.7
1.8
2.0
2.1
2.4
A
B
5.8 mm DIA.
30.2 mm
36
www.erico.com
11/15/07
1:58 PM
Page 37
3
SPRINKLER SUPPORTS
CPVC PIPE FIXING SO
Stand-off Two-hole Strap for CPVC Pipe
• Supports CPVC pipe off of the vertical face of structural
or composite wood joists with a minimum of 9.5 mm
web thickness
NEW
Note: DO NOT install on the bottom of a beam
or under other horizontal surfaces. For those
applications see ERICO® Model #108 2-hole strap
for CPVC pipe.
Item
No.
597811
597812
597813
597814
597815
SO12A
SO16A
SO20A
SO24A
SO32A
Nominal
Steel Pipe
Size
(mm)
Pipe
OD
(mm)
A
(mm)
B
(mm)
Max.
Hanger
Spacing
(m)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
26.9
33.7
42.2
48.3
60.3
68.3
74.6
84.1
90.5
103.2
82.6
82.6
82.6
114.3
127.0
1.7
1.8
2.0
2.1
2.4
25.4 mm
5.1 mm DIA.
A
B
www.erico.com
37
11/15/07
38
1:58 PM
Page 38
www.erico.com
11/15/07
1:58 PM
Page 39
4
CLEVIS HANGERS
NEW
NEW
NEW
Page 40
Page 41
Page 42
401
CADDY SLOT LOCK
402 - For copper pipe
®
www.erico.com
39
11/15/07
1:58 PM
Page 40
CLEVIS HANGERS
4
CLEVIS HANGER 401
NEW
Standard Duty
65 - 200 mm
Item
No.
179398
179399
179420
179421
179422
179423
179424
179425
179426
179427
179428
179429
179430
179431
179432
179433
179434
179435
179436
4010050EG
4010075EG
4010100EG
4010125EG
4010150EG
4010200EG
4010250EGAU
4010300EG
4010400EG
4010500EG
4010600EG
4010800EG
4011000EG
4011200EG
4011400EG
4011600EG
4011800EG
4012000EG
4012400EG
Nominal
Steel Pipe
Size
(mm)
Pipe
OD
(mm)
RS
Metric
A
(mm)
B
(mm)
Max.
Rec.
Load
(N)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
100 (4")
125 (5")
150 (6")
200 (8")
250 (10")
300 (12")
350 (14")
400 (16")
450 (18")
500 (20")
600 (24")
21
27
34
43
48
60
76
89
114
140
165
219
273
324
356
406
457
508
610
M10
M10
M10
M10
M10
M10
M12
M12
M16
M16
M20
M20
M20
M20
M24
M24
M28
M32
M32
54
61
79
84
100
114
133
152
197
248
298
356
419
473
552
609
680
762
867
41
45
52
61
75
83
95
105
137
173
209
241
276
305
368
400
444
498
552
2700
2700
2700
2700
2700
2700
5000
5000
5000
6400
8600
8900
16000
17000
18700
20500
21400
21400
21400
RS
B
A
40
www.erico.com
11/15/07
1:58 PM
Page 41
4
CLEVIS HANGERS
CADDY® SLOT LOCK
NEW
Standard Duty
• Size range: 15 mm and 200 mm
• Slotted crossbeam design is easier to assemble
than conventional nut and bolt style clevis hangers
• Eliminates the need to install additional parts to
control deflection
Item
No.
179300
179301
179302
179303
179304
179305
179306
179307
179308
179309
179310
179311
4270050EG
4270075EG
4270100EG
4270125EG
4270150EG
4270200EG
4270250EGAU
4270300EG
4270400EG
4270500EG
4270600EG
4270800EG
Nominal
Steel Pipe
Size
(mm)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
100 (4")
125 (5")
150 (6")
200 (8")
Pipe
OD
(mm)
RS
Metric
A
(mm)
B
(mm)
21
27
34
43
48
60
76
89
114
140
165
219
M10
M10
M10
M10
M10
M10
M12
M12
M16
M16
M20
M20
69
80
87
96
107
123
138
161
203
249
291
358
56
64
68
72
80
90
98
113
142
174
202
243
Max.
Rec.
Load
(N)
2700
2700
2700
2700
2700
2700
5000
5000
5000
6400
8600
8900
Features
• UL® Listed and FM approved
• Each assembly comes individually bagged, ready to assemble
• Patent-pending slotted crossbeam design is easier and faster to assemble
than conventional nut and bolt style hangers
• Notches in the crossbeam capture the top and bottom legs under load,
minimizing deflection
• Meets FM deflection requirements without the need to install
additional parts
• Has successfully passed the rigorous vibration testing requirements
for both UL and FM
B
A
“The CADDY® SLOT LOCK
Hanger is UL Listed under
UL 203 for fire protection
applications”
www.erico.com
41
11/15/07
1:58 PM
Page 42
CLEVIS HANGERS
4
CLEVIS HANGER 402
NEW
Light Duty for Copper Tubing
• Recommended for the suspension
of stationary non-insulated copper
tubing lines
• Finish: Copper-colored coating (According to
MSS-SP58 for identification purposes only,
isolation material required for dielectric barrier)
Item
No.
179312
179313
179314
179315
179316
179317
179318
179319
179320
179321
179322
179323
179324
4020050CP
4020075CP
4020100CP
4020125CP
4020150CP
4020200CP
4020250CP
4020300CP
4020350CP
4020400CP
4020500CP
4020600CP
4020800CP
Nominal
Steel Pipe
Size
(mm)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
90 (3-1/2")
100 (4")
125 (5")
150 (6")
200 (8")
Pipe
OD
(mm)
RS
Metric
A
(mm)
B
(mm)
12.7
19
25
32
38
51
63.5
76
89
102
127
152
203
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M16
M20
52
58
76
70
84
103
122
140
155
171
232
261
378
42
46
60
51
62
73
84
95
104
114
162
200
268
Max.
Rec.
Load
(N)
1000
1000
1000
1000
1000
1000
1100
1300
1600
2000
2700
3900
5200
RS
B
A
42
www.erico.com
11/15/07
1:58 PM
Page 43
5
RISER CLAMPS
NEW
NEW
NEW
Page 44
Page 45
Page 46
CADDY EZ RISER
511
700
®
www.erico.com
43
11/15/07
1:58 PM
Page 44
RISER CLAMPS
5
CADDY® EZ RISER
Vertical Pipe Support
• Recommended for supporting vertical steel pipe risers
• Slotted holes make assembly a snap – no fumbling
with loose hardware
• Bolts are accessible from the front, serrated washer head
design means no wrench required on back side for tightening
NEW
NOTE: Clamp is fitted for steel pipe and should be
installed below a coupling or shear lug, with bolts
torqued to recommended value in instruction sheet
Item
No.
179325
179326
179327
179328
179329
179330
179331
179332
179333
179334
179335
179336
179337
179338
179339
179340
179341
179342
179343
5100050EG
5100075EG
5100100EG
5100125EG
5100150EG
5100200EG
5100250EGAU
5100300EG
5100400EG
5100500EGAU
5100600EGAU
5100800EG
5101000EG
5101200EG
5101400EG
5101600EG
5101800EG
5102000EG
5102400EG
50 - 200 mm
Nominal
Steel Pipe
Size
mm (in)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
100 (4")
125 (5")
150 (6")
200 (8")
250 (10")
300 (12")
350 (14")
400 (16")
450 (18")
500 (20")
600 (24")
Pipe
OD
(mm)
A
(mm)
B
(mm)
HS
Metric
21
27
34
43
48
60
76
89
114
140
165
219
273
324
356
406
457
508
610
216
229
229
240
251
260
279
298
330
368
406
464
524
569
613
708
757
819
918
25
25
25
25
25
30
30
30
38
38
51
51
51
51
51
64
64
64
76
11
11
11
11
11
11
11
11
14
14
14
17
17
17
17
21
21
21
23
Max.
Rec.
Load
(N)
1100
1100
1100
1100
1100
1100
1700
2300
3600
5200
7000
11100
11100
12000
12000
12900
12900
12900
12900
HS
A
B
A
44
www.erico.com
11/15/07
1:58 PM
Page 45
5
RISER CLAMPS
RISER CLAMP 511
Vertical Support for Copper Tubing
• Recommended for supporting vertical
copper tubing risers
• Finish: Copper-colored coating (According to MSS-SP58 for
identification purposes only, isolation material required for
dielectric barrier)
NEW
NOTE: Clamp is fitted for copper tubing and
should be installed below a coupling or shear
lug, with bolts torqued to recommended value
Item
No.
Nominal
Copper
Tubing Size
mm (in)
Pipe
OD
(mm)
A
(mm)
B
(mm)
HS
Metric
Max.
Rec.
Load
(N)
13
216
25
11
350
179344
5110050CPAU
15 (1/2")
179345
5110075CPAU
20 (3/4")
19
235
25
11
350
179346
5110100CPAU
25 (1")
25
235
25
11
500
179347
5110125CPAU
32 (1-1/4")
32
241
32
11
900
179348
5110150CPAU
40 (1-1/2")
38
241
32
11
900
179349
5110200CPAU
50 (2")
51
264
32
11
900
179350
5110250CPAU
65 (2-1/2")
64
279
32
11
1300
179351
5110300CPAU
80 (3")
76
305
32
11
1300
179352
5110400CPAU
100 (4")
102
317
32
11
1300
179353
5110500CPAU
125 (5")
127
371
38
14
2200
179354
5110600CPAU
150 (6")
152
381
51
14
2700
HS
B
A
www.erico.com
45
11/15/07
1:58 PM
Page 46
RISER CLAMPS
5
STANDARD PIPE CLAMP 700
Offset Pipe Clamp
• Industrial pipe hanger to
support piping away from wall or floor
• Finish: Black. Electro-zinc plated (EG) or hot dip
galvanized (HDG) finish available upon special request
NEW
Item
No.
179355
179356
179357
179358
179359
179360
179361
179362
179363
179364
179365
179366
7000050PL
7000075PL
7000100PL
7000125PL
7000150PL
7000200PL
7000250PLAU
7000300PL
7000400PL
7000500PLAU
7000600PLAU
7000800PL
Nominal
Steel Pipe
Size
mm (in)
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
65 (2-1/2")
80 (3")
100 (4")
125 (5")
150 (6")
200 (8")
Pipe
OD
(mm)
A
(mm)
B
(mm)
HS
Metric
21
27
34
43
48
60
76
89
114
140
165
219
247
214
230
238
247
270
295
327
368
400
463
524
83
84
90
97
195
117
130
146
171
198
229
279
10
10
10
10
10
10
10
12
12
12
12
12
Max.
Rec.
Load
(N)
800
900
900
900
900
1800
1800
1800
2700
2700
3800
3800
B
HS
A
46
www.erico.com
11/15/07
1:59 PM
Page 47
6
STRUT CLIPS
NEW
NEW
Page 48
Page 49
Page 50
RIGD
TCC
CHC - For Copper pipe
Page 52
Page 53
CHC - For PVC pipe
CHC - For P/PVC pipe
www.erico.com
47
Page 51
CHC - For Steel pipe
11/15/07
1:59 PM
Page 48
STRUT CLIPS
6
STRUT PIPE CLAMPS RIGD
Heavy Duty Strut Clamps
• One piece break apart design includes captive combo
head machine screw and built in nut (thread impression)
• No nuts or bolts to drop or lose
RIGD0050EG
RIGD0075EG
RIGD0100EG
RIGD0125EG
RIGD0150EG
RIGD0200EG
RIGD0250EG
RIGD0300EG
RIGD0400EG
Nominal
Pipe Size
Pipe
OD (mm)
Max. Rec.
Load (N)
15
20
25
32
40
50
65
80
100
21
27
34
43
48
60
76
89
114
1810
2720
2720
2720
3630
3630
3630
3630
4540
OD
1 1/4"
NEW
OD
1 1/4"
48
www.erico.com
11/15/07
1:59 PM
Page 49
6
STRUT CLIPS
CADDY® CUSHION CLAMP TCC
NEW
Tubing Cushion Clamps
• Ideal for multiple runs while absorbing shock and vibration,
reducing unwanted noise and preventing galvanic corrosion
• Fits any standard 41 mm wide strut channel
• Interlock design helps ensure that the cushion remains in place
TCC0025CP
TCC0037CP
TCC0050CP
TCC0062CP
TCC0075CP
TCC0087CP
TCC0100CP
TCC0112CP
TCC0125CP
TCC0137CP
TCC0150CP
TCC0162CP
TCC0175CP
TCC0187CP
TCC0200CP
TCC0212CP
TCC0250CP
TCC0262CP
TCC0300CP
TCC0312CP
TCC0331CP
TCC0362CP
TCC0400CP
TCC0412CP
TCC0512CP
TCC0612CP
Nominal Pipe
Size Copper Tube
ID
6
10
15
16
20
22
25
28
32
35
40
41
44
48
50
54
65
66
80
79
84
92
100
105
125
150
6
10
13
16
19
22
25
28
32
35
38
41
44
48
51
54
64
66
76
79
84
92
104
110
130
155
A
B
B
16
21
24
27
31
33
37
40
43
46
50
53
56
59
62
65
75
78
91
91
101
107
116
126
142
167
25
29
34
39
43
A
46
50
53
56
60
63
66
69
73
77
82
96
100
109
112
121
130
141
148
166
192
ID
40
mm
1 9/16"
B
ID
A
Controlled Squeeze
Shoulder Bolt
Plated or
Stainless Steel
Clamp
1 9/16"
Nyloc Nut
Elastomer
Cushion
Living Hinge
www.erico.com
49
11/15/07
1:59 PM
Page 50
STRUT CLIPS
6
Channel Clip - CHC for Copper Pipe
Installation of copper pipe to strut/channel
• Channel clip sizes 15 mm to 300 mm
• Suits 41 mm wide strut/channel and cantilever brackets
• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)/
polyester powder coating (PPC) brown
Pipe
Size
(mm)
Actual
Pipe
OD
(mm)
WxT
(mm)
Fastener
EG
HDG
CHC-015-CU-GAL
CHC-015-CU-HDG
15
12.7
32 x 1.5
M6
CHC-016-CU-GAL
CHC-016-CU-HDG
18
15.9
32 x 1.5
M6
CHC-020-CU-GAL
CHC-020-CU-HDG
20
19
32 x 1.5
M6
32 x 1.5
M6
CHC-025-CU-GAL
CHC-025-CU-HDG
25
25.4
32 x 1.5
M6
CHC-029-CU-GAL
CHC-029-CU-HDG
29
32 x 1.5
M6
CHC-032-CU-GAL
CHC-032-CU-HDG
32
32 x 2.0
M6
CHC-023-CU-GAL
23
CHC-035-CU-GAL
31.8
35
T
32 x 2.0
M8
CHC-040-CU-GAL
CHC-040-CU-HDG
40
38.1
32 x 2.0
M8
CHC-050-CU-GAL
CHC-050-CU-HDG
50
51.2
32 x 2.5
M8
CHC-065-CU-GAL
CHC-065-CU-HDG
65
63.5
32 x 2.5
M8
CHC-080-CU-GAL
CHC-080-CU-HDG
80
76.2
32 x 2.5
M8
CHC-100-CU-GAL
CHC-100-CU-HDG
100
101.6
32 x 2.5
M10
CHC-125-CU-GAL
CHC-125-CU-HDG
125
127
32 x 2.5
M10
CHC-150-CU-GAL
CHC-150-CU-HDG
150
152.4
32 x 3.0
M10
CHC-200-CU-GAL
CHC-200-CU-HDG
200
203.2
32 x 3.0
M10
CHC-225-CU-GAL
CHC-225-CU-HDG
225
228.6
32 x 3.0
M10
CHC-250-CU-GAL
CHC-250-CU-HDG
250
254
32 x 3.0
M10
CHC-300-CU-GAL
CHC-300-CU-HDG
300
303
32 x 3.0
M10
Pipe
Size
(mm)
Actual
Pipe
OD
(mm)
WxT
(mm)
Fastener
CHC-015-CU-PPC
15
12.7
32 x 1.5
M6
CHC-020-CU-PPC
20
19
32 x 1.5
M6
CHC-025-CU-PPC
25
25.4
32 x 1.5
M6
CHC-032-CU-PPC
32
31.8
32 x 2.0
M6
CHC-040-CU-PPC
40
38.1
32 x 2.0
M8
CHC-050-CU-PPC
50
51.2
32 x 2.5
M8
CHC-065-CU-PPC
65
63.5
32 x 2.5
M8
CHC-080-CU-PPC
80
76.2
32 x 2.5
M8
CHC-100-CU-PPC
100
101.6
32 x 2.5
M10
CHC-125-CU-PPC
125
127
32 x 2.5
M10
CHC-150-CU-PPC
150
152.4
32 x 3.0
M10
CHC-200-CU-PPC
200
203.2
32 x 3.0
M10
PPC
50
W
www.erico.com
11/15/07
1:59 PM
Page 51
6
STRUT CLIPS
Channel Clip - CHC for Steel Pipe
Installation of steel pipe to strut/channel
• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)
Pipe
Size
(mm)
Actual
Pipe
OD
(mm)
WxT
(mm)
Fastener
CHC-015-GWIR-GAL CHC-015-GWIR-HDG
15
21.3
32 x 1.5
M6
20
26.9
32 x 1.5
M6
25
33.7
32 x 2.0
M6
32
42.4
32 x 2.0
M8
40
48.3
32 x 2.5
M8
50
60.3
32 x 2.5
M8
65
76.1
32 x 2.5
M8
80
88.9
32 x 2.5
M8
100
113.3
32 x 2.5
M10
125
139.7
32 x 3.0
M10
150
165.1
32 x 3.0
M10
200
219
32 x 3.0
M10
250
273
32 x 3.0
M10
EG
HDG
www.erico.com
51
T
W
11/15/07
1:59 PM
Page 52
STRUT CLIPS
6
Channel Clip - CHC for PVC Pipe
Installation of PVC pipe to strut/channel
• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)/
polyester powder coating (PPC) white
Pipe
Size
(mm)
Actual
Pipe
OD
(mm)
WxT
(mm)
Fastener
CHC-040-PVC-GAL CHC-040-PVC-HDG
40
43
32 x 2.0
M8
50
55
32 x 2.5
M8
65
69
32 x 2.5
M8
80
82
32 x 2.5
M8
90
90
32 x 2.5
M8
100
110
32 x 2.5
M10
150
160
32 x 3.0
M10
225
251
32 x 3.0
M10
300
316
32 x 3.0
M10
375
400
32 x 3.0
M10
Pipe
Size
(mm)
Actual
Pipe
OD
(mm)
WxT
(mm)
Fastener
40
43
32 x 2.0
M8
CHC-050-PVC-PPC
50
55
32 x 2.5
M8
CHC-065-PVC-PPC
65
69
32 x 2.5
M8
CHC-080-PVC-PPC
80
82
32 x 2.5
M8
CHC-090-PVC-PPC
90
90
32 x 2.5
M8
CHC-100-PVC-PPC
100
110
32 x 2.5
M10
CHC-150-PVC-PPC
150
160
32 x 3.0
M10
CHC-225-PVC-PPC
225
251
32 x 3.0
M10
CHC-300-PVC-PPC
300
316
32 x 3.0
M10
CHC-375-PVC-PPC
375
400
32 x 3.0
M10
EG
PPC
CHC-040-PVC-PPC
HDG
52
T
W
www.erico.com
11/15/07
1:59 PM
Page 53
6
STRUT CLIPS
Channel Clip - CHC for P/PVC Pipe
Installation of pressure PVC pipe to strut/channel
• Finish: Electro-zinc plated (EG)/polyester powder
coating (PPC) white
Pipe
Size
(mm)
Actual
Pipe
OD
(mm)
WxT
(mm)
Fastener
CHC-015-PPVC-PPC
15
21.3
32 x 1.5
M6
CHC-020-PPVC-PPC
20
26.7
32 x 1.5
M6
CHC-025-PPVC-PPC
25
33.7
32 x 2.0
M6
CHC-032-PPVC-PPC
32
42.2
32 x 2.0
M8
CHC-040-PPVC-PPC
40
48.2
32 x 2.5
M8
CHC-050-PPVC-PPC
50
60.3
32 x 2.5
M8
CHC-065-PPVC-PPC
65
75.3
32 x 2.5
M8
CHC-080-PPVC-PPC
80
88.9
32 x 2.5
M8
CHC-100-PPVC-PPC
100
114.3
32 x 2.5
M10
CHC-200-PPVC-GAL
200
219.1
32 x 3.0
M10
CHC-250-PPVC-GAL
250
280
32 x 3.0
M10
EG
PPC
www.erico.com
53
T
W
11/15/07
54
1:59 PM
Page 54
www.erico.com
11/15/07
1:59 PM
Page 55
Page 56
Page 57
Page 58
ERIC15
ERIC16
ERIC18
www.erico.com
55
7
11/15/07
1:59 PM
Page 56
7
ERIC15 - Medium Duty Saddle Clamp for
Steel Pipe
Medium duty support for Steel pipe
• Steel saddle clamp sizes 50 nb to 200 nb
• Supports pipe close to wall or ceiling
Pipe
Size
(nb)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
Max.
Rec.
Load
(N)
ERIC15 - 60
50
60.3
40 x 6.0
160
14
3500
ERIC15 - 76
65
76.1
40 x 6.0
175
14
3500
ERIC15 - 89
80
88.9
40 x 6.0
190
14
5000
ERIC15 - 114
100
113.3
40 x 6.0
215
14
6000
ERIC15 - 165
150
165.1
40 x 6.0
265
14
6000
ERIC15 - 219
200
219
40 x 6.0
315
14
6000
HS
W
T
56
L
www.erico.com
11/15/07
1:59 PM
Page 57
7
ERIC16 - Medium Duty Two Piece Clamp
for Steel and Copper Pipe
• Two piece bracket sizes 50 nb to 300 nb & 100 mm
to 150 mm copper pipe
• Double bolted medium duty
Pipe
Size
(nb)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
Max.
Rec.
Load
(N)
ERIC16 - 60
50
60.3
40 x 6.0
150
14
4000
ERIC16 - 76
65
76.1
40 x 6.0
167
14
4000
ERIC16 - 89
80
88.9
40 x 6.0
180
14
4000
ERIC16 - 114
100
113.3
40 x 6.0
204
14
4000
ERIC16 - 140
125
139.7
40 x 6.0
230
14
4000
ERIC16 - 165
150
165.1
40 x 6.0
256
14
4000
ERIC16 - 220
200
219
40 x 6.0
331
14
6000
ERIC16 - 273
250
273
40 x 6.0
384
14
7500
ERIC16 - 324
300
323.9
40 x 6.0
440
14
10000
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
Max.
Rec.
Load
(N)
ERIC16 - 102
100
101.6
40 x 6.0
192
14
4000
ERIC16 - 127
125
127
40 x 6.0
218
14
4000
ERIC16 - 152
150
152.4
40 x 6.0
243
14
4000
For Copper Pipe
HS
T
W
L
www.erico.com
57
11/15/07
1:59 PM
Page 58
7
ERIC18 - Adjustable Clamp for Steel and
Copper Pipe
Adjustable suspension of horizontal & vertical pipe
services
• Two piece bracket sizes 50 nb to 250 nb &
125 mm and 150 mm copper pipe
• Adjustable yoke
• Double bolted
Pipe
Size
(nb)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
Max.
Rec.
Load
(N)
ERIC18 - 60
50
60.3
40 x 6.0
150
14
2000
ERIC18 - 76
65
76.1
40 x 6.0
177
14
4000
ERIC18 - 89
80
88.9
40 x 6.0
180
14
4000
ERIC18 - 114
100
113.3
40 x 6.0
204
14
5000
ERIC18 - 165
150
165.1
40 x 6.0
256
14
5000
ERIC18 - 219
200
219
40 x 6.0
331
14
5000
ERIC18 - 273
250
273
40 x 6.0
384
14
7500
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
Max.
Rec.
Load
(N)
ERIC18 - 127
125
127
40 x 6.0
218
14
5000
ERIC18 - 152
150
152.4
40 x 6.0
243
14
5000
For Copper Pipe
HS
W
HS
T
L
58
www.erico.com
11/15/07
1:59 PM
Page 60
Page 61
ERIC30
ERIC31
www.erico.com
59
Page 59
8
11/15/07
1:59 PM
Page 60
8
ERIC30 - Heavy Duty Saddle Clamp for
Steel Pipe
Heavy duty support for steel pipe
• Steel saddle clamp sizes 150 mm to 500 mm
• Heavy duty
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
A
Max.
Rec.
Load
(N)
ERIC30 - 168
150
165
75 x 10
324
22
260
contact factory
ERIC30 - 219
200
219
75 x 10
375
22
310
contact factory
ERIC30 - 273
250
273
75 x 10
428
22
364
contact factory
ERIC30 - 324
300
324
75 x 10
479
22
415
contact factory
ERIC30 - 356
350
356
75 x 10
511
22
447
contact factory
ERIC30 - 406
400
406
90 x 12
561
26
497
contact factory
ERIC30 - 457
450
457
90 x 12
612
26
548
contact factory
ERIC30 - 508
500
508
90 x 12
663
26
600
contact factory
HS
W
A
T
60
L
www.erico.com
11/15/07
1:59 PM
Page 61
8
ERIC31 - Heavy Duty Two Piece Clamp for
Steel Pipe
• Steel two piece bracket sizes 150 mm to 600 mm
• Double bolted
• Heavy duty
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
A
Max.
Rec.
Load
(N)
ERIC31 - 168
150
165
75 x 10
318
M20
254
contact factory
ERIC31 - 219
200
219
75 x 10
369
M20
305
contact factory
ERIC31 - 273
250
273
75 x 10
423
M20
359
contact factory
ERIC31 - 324
300
324
75 x 10
474
M20
410
contact factory
ERIC31 - 356
350
356
75 x 12
512
M24
448
contact factory
ERIC31 - 406
400
406
75 x 12
562
M24
498
contact factory
ERIC31 - 457
450
457
75 x 16
629
M30
565
contact factory
ERIC31 - 508
500
508
75 x 16
680
M30
616
contact factory
ERIC31 - 610
600
610
75 x 16
782
M30
718
contact factory
HS
T
W
A
L
www.erico.com
61
11/15/07
62
1:59 PM
Page 62
www.erico.com
11/15/07
2:00 PM
Page 63
9
DOMESTIC PIPE CLIPS
Page 64
Page 65
Page 65
Page 66
BRC
CU-HF
CU-SAD
CUS
Page 67
Page 68
Page 69
Page 70
FFC
SPH
HNG
HST
Page 70
Page 71
Page 72
Page 73
SOW
SPC - For Copper pipe
SPC - For PVC pipe
Page 74
Page 74
Page 75
WB
WB-PPC
WB-ADJ
www.erico.com
63
SPC - For P/PVC pipe
11/15/07
2:00 PM
Page 64
DOMESTIC PIPE CLIPS
9
Bracket Clip - BRC for Copper Pipe
• Bracket clips for sizes 15 mm to 100 mm
• Two piece for fast convenient installation
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
S
(mm)
BRC-015-CU-PPC
15
13
25 x 1.7
25
7
BRC-020-CU-PPC
20
19
25 x 1.7
25
7
BRC-025-CU-PPC
25
25
25 x 1.7
25
7
BRC-032-CU-PPC
32
32
25 x 1.7
25
7
BRC-040-CU-PPC
40
38
25 x 1.7
25
7
BRC-050-CU-PPC
50
51
25 x 1.7
25
7
BRC-065-CU-PPC
65
64
25 x 1.7
25
7
BRC-080-CU-PPC
80
76
25 x 1.7
25
7
BRC-100-CU-PPC
100
102
25 x 1.7
25
7
W
S
S
L
T
64
www.erico.com
11/15/07
2:00 PM
Page 65
9
DOMESTIC PIPE CLIPS
Half Saddle Clip - CU-HF for Copper Pipe
Supports copper tube
• Half saddle clip sizes 15 mm and 20 mm
• Single fastener
HS
T
W
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
HS
(mm)
CU-HF-015-PPC
15
12.7
12 x 1.2
4.8
CU-HF-020-PPC
20
19
16 x 1.2
4.8
Copper Saddles - CU-SAD for Copper Pipe
Light duty support for copper tubing
• Copper saddle sizes 6 mm to 25 mm
• Attaches directly to wall or ceiling
• Material: Copper
HS
T
W
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
HS
(mm)
CU-SAD-006
6
6
11 x 0.6
4.0
CU-SAD-008
8
8
11 x 0.6
4.0
CU-SAD-010
10
10
11 x 0.6
4.0
CU-SAD-015
12
13
13 x 0.6
5.3
CU-SAD-016
16
16
15 x 0.6
5.3
CU-SAD-020
20
19
15 x 0.6
5.3
CU-SAD-025
25
25
15 x 0.6
5.3
www.erico.com
65
11/15/07
2:00 PM
Page 66
DOMESTIC PIPE CLIPS
9
Copper Saddle - CUS for Copper Pipe
Light duty support for copper tubing
• Copper saddle sizes 6 mm to 50 mm
• Attaches directly to horizontal or vertical wall
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
CUS-006-CU-PPC
6
6
13 x 0.7
32
5
CUS-008-CU-PPC
8
8
13 x 0.7
34
5
CUS-010-CU-PPC
10
10
13 x 0.7
36
5
CUS-012-CU-PPC
12
13
13 x 0.7
39
5
CUS-016-CU-PPC
16
16
13 x 0.7
47
5
CUS-020-CU-PPC
20
19
13 x 0.8
50
5
CUS-025-CU-PPC
25
25
20 x 1.1
60
5
CUS-032-CU-PPC
32
32
20 x 1.1
75
5
CUS-040-CU-PPC
40
38
20 x 1.1
90
6.5
CUS-050-CU-PPC
50
51
20 x 1.1
100
6.5
HS
W
T
L
66
www.erico.com
11/15/07
2:00 PM
Page 67
9
DOMESTIC PIPE CLIPS
Flush Fitting Clip - FFC for PVC Pipe
Horizontal and vertical support for close fit PVC pipe
• Flush fitting clip sizes 40 mm to 100 mm
• Suits DWV and PVC pipe
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
HS
(mm)
FFC-040-PVC-PPC
40
43
20 x 1.30
80
5
FFC-050-PVC-PPC
50
55
20 x 1.30
98
5
FFC-065-PVC-PPC
65
69
20 x 1.30
115
6
FFC-075-PVC-PPC
75
75
20 x 1.30
125
6
FFC-080-PVC-PPC
80
82
20 x 1.30
130
6
FFC-090-PVC-PPC
90
90
20 x 1.30
140
6
FFC-100-PVC-PPC
100
110
20 x 1.30
150
6
HS
W
T
L
www.erico.com
67
11/15/07
2:00 PM
Page 68
DOMESTIC PIPE CLIPS
9
Single Piece Hanger - SPH for PVC Pipe
Suspends PVC pipe services
• Hanging clip for sizes 40 mm to 100 mm
• Cut to length
• 450 mm strap
• Finish: Polyester powder coating (PPC) white, EG strap
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(in)
Strap
Length
(mm)
HS
(L x W)
(mm)
SPH-040-PVC-PPC
40
43
20 x 1
450
9x6
SPH-050-PVC-PPC
50
55
20 x 1
450
9x6
SPH-065-PVC-PPC
65
69
20 x 1
450
9x6
SPH-080-PVC-PPC
80
82
20 x 1
450
9x6
SPH-090-PVC-PPC
90
90
20 x 1
450
9x6
SPH-100-PVC-PPC
100
110
20 x 1
450
9x6
W
450
HS
T
68
www.erico.com
11/15/07
2:00 PM
Page 69
9
DOMESTIC PIPE CLIPS
Hanging Clip - HNG for PVC Pipe
Suspends PVC pipe services
• Hanging clip for sizes 40 mm to 150 mm
• Double bolted
• 450 mm strap
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
Strap
Length
(mm)
HS
(mm)
HNG-040-PVC-PPC
40
43
20 x 3
450
10
HNG-050-PVC-PPC
50
55
20 x 3
450
10
HNG-065-PVC-PPC
65
69
20 x 3
450
10
HNG-080-PVC-PPC
80
82
20 x 3
450
10
HNG-090-PVC-PPC
90
90
20 x 3
450
10
HNG-100-PVC-PPC
100
110
20 x 3
450
10
HNG-150-PVC-PPC
150
160
25 x 3
450
10
HS
W
450
T
www.erico.com
69
11/15/07
2:00 PM
Page 70
DOMESTIC PIPE CLIPS
9
Hanging Strap - HST for SPC Clip
Vertical hanging support extension
• Hanging strap sizes 300 mm and 600 mm
• Suits all SPC single piece & BRC bracket clips
• Convenient cup head fastener
L
X
T
W
L
(mm)
W
(mm)
T
(mm)
X
(mm)
Surface
Finish
(Screw)
Bolt
HST-GAL-300
300
25
1.2
110
EG
Cup head 1/4" x 1"
HST-GAL-600
600
25
1.2
230
EG
Cup head 1/4" x 1"
Stand off Wall Clip - SOW for PVC Pipe
Horizontal and vertical PVC pipe services
• Stand off wall clip for sizes 40 mm to 100 mm
H
HS
T
W
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
H
(mm)
HS
(mm)
SOW-040-PVC-PPC
40
43
20 x 3.0
70
5
SOW-050-PVC-PPC
50
55
20 x 3.0
85
5
SOW-065-PVC-PPC
65
69
20 x 3.0
95
6
SOW-080-PVC-PPC
80
82
20 x 3.0
105
6
SOW-090-PVC-PPC
90
90
20 x 3.0
110
6
SOW-100-PVC-PPC
100
110
20 x 3.0
135
6
70
www.erico.com
11/15/07
2:00 PM
Page 71
9
DOMESTIC PIPE CLIPS
Single Piece Clip - SPC for Copper Pipe
Supports copper pipe services with wall bracket,
hanging strap or ERIC 1010
• Single piece clip for sizes 15 mm to 150 mm
• One piece clip for fast convenient installation
• Available in stainless steel grade 316
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
S
(mm)
SPC-015-CU-PPC
15
13
25 x 1.0
25
7x7
SPC-020-CU-PPC
20
19
25 x 1.0
25
7x7
SPC-025-CU-PPC
25
25
25 x 1.2
25
7x7
SPC-032-CU-PPC
32
32
25 x 1.2
25
7x7
SPC-040-CU-PPC
40
38
25 x 1.2
25
7x7
SPC-050-CU-PPC
50
51
25 x 1.4
25
7x7
SPC-065-CU-PPC
65
64
25 x 1.5
25
7x7
SPC-080-CU-PPC
80
76
25 x 1.5
25
7x7
SPC-100-CU-PPC
100
102
25 x 1.5
25
7x7
SPC-125-CU-PPC
125
127
25 x 1.7
25
7x7
SPC-150-CU-PPC
150
152
25 x 1.7
25
7x7
S
S
W
T
L
www.erico.com
71
11/15/07
2:00 PM
Page 72
DOMESTIC PIPE CLIPS
9
Single Piece Clip - SPC for PVC Pipe
Supports PVC pipe services with wall bracket,
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
S
(mm)
SPC-040-PVC-PPC
40
43
25 x 1.2
25
7x7
SPC-050-PVC-PPC
50
55
25 x 1.4
25
7x7
SPC-065-PVC-PPC
65
69
25 x 1.5
25
7x7
SPC-080-PVC-PPC
80
82
25 x 1.5
25
7x7
SPC-090-PVC-PPC
90
90
25 x 1.5
25
7x7
SPC-100-PVC-PPC
100
110
25 x 1.5
25
7x7
SPC-150-PVC-PPC
150
160
25 x 1.7
25
7x7
S
S
W
T
L
72
www.erico.com
11/15/07
2:00 PM
Page 73
9
DOMESTIC PIPE CLIPS
Single Piece Clip - SPC for Pressure PVC Pipe
Supports Pressure pipe services with wall bracket,
Pipe
Size
(mm)
Actual
Pipe OD
(mm)
WxT
(mm)
L
(mm)
S
(mm)
SPC-015-PPVC-PPC
15
21
25 x 1.0
25
7x7
SPC-020-PPVC-PPC
20
27
25 x 1.0
25
7x7
SPC-025-PPVC-PPC
25
33
25 x 1.2
25
7x7
SPC-032-PPVC-PPC
32
42
25 x 1.2
25
7x7
SPC-040-PPVC-PPC
40
48
25 x 1.4
25
7x7
SPC-050-PPVC-PPC
50
60
25 x 1.4
25
7x7
SPC-065-PPVC-PPC
65
75
25 x 1.4
25
7x7
SPC-100-PPVC-PPC
100
114
25 x 1.5
25
7x7
S
S
W
T
L
www.erico.com
73
11/15/07
2:00 PM
Page 74
DOMESTIC PIPE CLIPS
9
Wall Bracket - WB
Attaches to wall/ceiling with hanging strap,
single piece clip, bracket clip
• Wall bracket for all sizes of HST, SPC & BRC products
• 20 mm adjustment
• Supplied with cup head fastener
R
W
T
WB-GAL
HS
L
WxT
(mm)
L
(mm)
R
(mm)
HS
(mm)
25 x 1.5
85
20
6.5
Wall Bracket - PPC
single piece clip or bracket clip
• Wall bracket for all sizes of HST, SPC, BRC and
ERIC 1010 products
• Supplied with cup head fasteners
• Finish: Polyester powder coating (PPC) white/galvabond
WB-PPC
WxT
(mm)
L
(mm)
R
(mm)
HS
(mm)
22 x 1.5
85
20
6.5
R
T
74
HS
W
L
www.erico.com
11/15/07
2:00 PM
Page 75
9
DOMESTIC PIPE CLIPS
Adjustable Stand Off Bracket - WB-ADJ
single piece clip or bracket clip
• Wall bracket for all sizes of HST, SPC, BRC and
ERIC 1010 products
• Supplied with cup head fasteners
WB-ADJ-GAL
WxT
(mm)
L
(mm)
R
(mm)
HS
(mm)
22 x 2.0
104
47
6.6
HS
L
W
R
www.erico.com
75
T
11/15/07
76
2:00 PM
Page 76
www.erico.com
11/15/07
2:00 PM
Page 77
10
Page 78
Page 79
Page 79
Page 80
MACRO V ISO
EQV
EQVS
EQZS
Page 80
Page 81
EQLS
EQ-ZAB
www.erico.com
77
11/15/07
2:00 PM
Page 78
10
MACRO V ISO
Circular ducting clamp with M8/M10 combi boss
• EPDM rubber insulation for sound reduction
compliant with DIN 4109
• M6 multi-function screw with combination head
(slot & crosshead), with retaining washer
• For duct diameter from 200 mm - 710 mm
d
(mm)
582450
582470
582480
582490
582500
582510
582530
582540
582550
582560
582580
582590
582600
582810
200
224
250
280
300
315
355
400
450
500
560
600
630
710
WxT
23
23
23
23
23
23
23
23
25
25
25
25
25
25
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
Sc x L
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
x
x
x
x
x
x
x
x
x
x
x
x
x
x
40
40
40
40
40
40
40
40
40
40
40
40
40
40
T
W
M8/M10
Sc
d
L
B2
DIN EN
135011:E
78
- 50°/+110°
www.erico.com
11/15/07
2:01 PM
Page 79
10
EQV
Ducting fixing
• V shaped bracket to form around spiral duct
• Fits on to various duct diameters
• Fixing with blind rivets or self drilling screws
• Material 40 x 2.0 mm (W x T)
597590
H
(mm)
W
(mm)
D
(mm)
E
(mm)
60
40
10
4.2
8.5
E
H
T
D
E
W
8.5x20
EQVS
Ducting fixing
• V shaped bracket to form around spiral duct
• Type S is supplied with sound reduction mounting
• Fits on to various duct diameters
597770
H
(mm)
W
(mm)
D
(mm)
E
(mm)
60
40
8.4
4.2
1
8.5
E
H
T
D
E
W
www.erico.com
79
8.5x20
11/15/07
2:01 PM
Page 80
10
EQZS
Duct fixing bracket Z-shaped
• Quick installation of square ducts
• Supplied with sound reduction mounting compliant
with DIN 4109
• Easy height adjustment by using threaded rod and
hex nuts
E
D
C
597790
C
(mm)
D
(mm)
E
(mm)
A
(mm)
20
8.4
40
30
4.2
60 mm
T
W
A
EQLS
Duct fixing bracket L-shaped
• Quick fixing of square ducts
• Supplied with sound reduction mounting compliant
with DIN 4109
• Different lengths available for different applications
hex nuts
E
D
C
597791
597780
597792
L
(mm)
C
(mm)
D
(mm)
E
(mm)
50
85
130
20
20
20
8.4
8.4
8.4
40
40
40
4.2
L
W
T
80
www.erico.com
11/15/07
2:01 PM
Page 81
10
EQ-ZAB
Duct fixing bracket Z-shaped
• Quick installation of square ducts
hex nuts
E
D
C
597790
C
(mm)
D
(mm)
E
(mm)
A
(mm)
20
11
40
30
4.2
60 mm
T
A
www.erico.com
81
W
11/15/07
82
2:01 PM
Page 82
www.erico.com
11/15/07
2:01 PM
Page 83
11
Page 84
Page 85
Page 86
CADDY SUPERKLIP
TSM
TSMI
®
www.erico.com
83
11/15/07
2:01 PM
Page 84
11
PIPE FIXINGS CADDY® SUPERKLIP
Tube and Pipe Clamp
• Size Range: 12 mm to 64 mm
• Pushing the tube into the clamp closes and
locks the pipe clamp
• Fasten with either wood screw, dual threaded screw
with or without collar, nail with collar or M6 threaded rod
• Age resistant, UV resistant, suitable for outdoor
applications
• Color: Gray
Steel Pipe Copper Tubing
OD (mm)
OD (mm)
Description
389001
389002
389003
389004
389005
389006
389007
389008
389009
389011
389012
389013
389014
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
CADDY
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
SUPERKLIP
12
15
17
20
22
25
28
32
36
40
47
51
59
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
12.7
19
21.3
26.7
25.4
33.4
31.8
38.1
42.2
48.3
51.2
63.5
60.3
A
(mm)
B
(mm)
C
(mm)
Max. Rec.
Load (N)
11.8 - 14.3
14.3 - 16.8
16.8 - 19.5
19.5 - 21.8
21.8 - 24.8
24.8 - 27.8
27.8 - 31.2
31.2 - 35.5
35.5 - 39.5
39.5 - 43.5
46.5 - 50.5
50.5 - 55.5
58.5 - 64
14.5
14.5
16.0
16.3
16.5
17.0
17.0
17.5
18.0
19.5
19.5
20.0
21.0
29.9
32.0
35.4
39.4
42.0
45.1
48.9
54.4
59.4
64.2
72.8
78.7
88.2
200
220
235
250
270
300
320
370
400
440
470
500
540
A
B
C
84
www.erico.com
11/15/07
2:01 PM
Page 85
11
PIPE FIXINGS TSM
TSM Non-metallic Tubing Channel Clip
• Size Range: 10 mm to 41 mm CT sizes
• Plenum rated for UL 2043
• Use for installation of refrigeration, A/C tubing and
PEX piping in horizontal and vertical channels
• Requires no tools for installation - Turn in installation
Description
389046
389047
389048
389049
389053
389054
389055
389056
TSM0037
TSM0050
TSM0062
TSM0075
TSM0087
TSM0112
TSM0137
TSM0162
OD Size
(mm OD)
10
12
16
20
22
28
35
41
mm
mm
mm
mm
mm
mm
mm
mm
Cu OD
(mm)
10
12
15
20
22
28
35
42
PEX
OD (mm)
mm
mm
mm
mm
mm
mm
mm
mm
16 mm
20 mm
32 mm
40 mm
Hand turn-in installation
OD
www.erico.com
85
11/15/07
2:01 PM
Page 86
11
PIPE FIXINGS TSMI
TSMI Non-metallic Tubing Channel Clip
for Insulated Lines
• Size Range: 15 mm to 54 mm CT sizes
• Plenum rated for UL 2043
• Use for installation of refrigeration, A/C tubing and
PEX piping in horizontal and vertical channels
• Requires no tools for installation
• Allows installation of copper tubing together with insulation
of either 9 mm or 13 mm thickness
389057
389058
389059
389061
389062
389063
389064
389065
389066
389067
389068
Description
OD Size
(mm)
Cu OD
(mm)
PEX
OD (mm)
TSMI0062
TSMI0075
TSMI0087
TSMI0100
TSMI0112
TSMI0125
TSMI0137
TSMI0150
TSMI0162
TSMI0200
TSMI0212
15
20
22
25
28
32
35
40
42
50
54
16.0
19.0
23.0
25.0
29.0
32
35.0
40
42
16.0
19.0
23.0
25.0
29.0
32
35.0
40
42
50
51
OD
B
86
www.erico.com
11/15/07
2:01 PM
Page 87
12
BEAM CLAMPS
Page 88
Page 89
Page 90
Page 90
TK300
BTK310
HB2
315
www.erico.com
87
11/15/07
2:01 PM
Page 88
BEAM CLAMPS
12
TK300
Beam clamp
•
•
•
•
•
To fix on to beams without welding or drilling
Compact cast body
VdS and FM approved
Hollow pointed bolt for better grip
Ø
(mm)
A
(mm)
Max. Rec.
Load (N)
A
B
389500
389510
389520
9
11
13
18
18
26
VdS
VdS
VdS
FM
FM
1200
2500
3500
H
Ø
TOP MOUNT
May be mounted
in either position
BOTTOM MOUNT
88
www.erico.com
11/15/07
2:01 PM
Page 89
12
BEAM CLAMPS
BTK310
Beam clamp
•
•
•
•
•
•
•
To fix on to beams without welding or drilling
For beam thickness up to 31.8 mm
For rod sizes M10 & M12
FM approved
Hollow pointed bolt for better grip
Also available with Imperial threads
Description
389890
388890
598501
598502
BTK310-11 mm
BTK310-13 mm
Ø
(mm)
A
(mm)
M10
M12
11
13
31.8
31.8
31.8
31.8
Max. Rec.
Load (N)
VdS
VdS
VdS
VdS
B
FM
FM
FM
FM
2500
3500
2500
3500
A
A
H
Ø
TOP MOUNT
Ø
TOP MOUNT
May be mounted
in either position
May be mounted
in either position
BOTTOM MOUNT
BOTTOM MOUNT
www.erico.com
89
11/15/07
2:01 PM
Page 90
BEAM CLAMPS
12
HB2
Clamp HB2
• Swivel type fixing
• Fix against the side of a steel beam
• Finish: Electro-zinc plated (EG) or
Hot dip galvanised (HDG)
336030
336040
2000 N
950 N
A
(mm)
Finish
< 24
< 24
EG
HDG
2000 N
2500 N
6 Nm
700 N
800 N
PURLIN HANGER 315
Malleable Iron Purlin Clamp Black
• Size Range: M10 rod size
• Surface Finish: Black, Electro-zinc plated
• Structural attachment to lower flange of metal beams or
purlins with 45° flanges up to 50 mm long and 90° flanges up
to 38 mm high
• Set screw made of hardened steel
• Conforms with Federal Specification WW-H-171 (Type 23),
Manufacturers Standardization Society ANSI/MSS-SP-58
(Type 23); install in accordance with ANSI/MSS-SP-69
• Setscrew must be tightened and torqued onto the sloped
side of the I-beam
Part
Number
RS
A
B
C
Set
Max.
(mm) (mm) (mm) Screw Pipe Size
Plain Finish
3150037PL
M10
50
Electro-zinc Plated Finish
3150037EG
M10
50
38
25
3/8”
100
Max. Rec.
Load (N)
1800
A
B
C
38
25
3/8”
100
1800
RS
90
www.erico.com
11/15/07
2:02 PM
Page 91
13
Page 94
Page 94
Page 95
Page 95
H
H-i
H-ST
H-CT
Page 96
Page 96
Page 97
Page 98
H-CTB
H-MA
H-Ti/T
H-S
Page 98
Page 99
Page 99
Page 100
H-SR
H-MSM
H-PSM
EM
Page 100
Page 101
Page 101
Page 102
EM-SM
EM-P
EM-M
VF
www.erico.com
91
11/15/07
2:02 PM
Page 92
13
Page 102
Page 103
Page 103
Page 104
VAFT
J
J-MA
J-Ti/T
Page 104
Page 105
Page 105
Page 106
EBC
EBC-MSM
EBC-M
EBC-P
Page 106
Page 107
Page 107
Page 108
INC8
122
122 MA
122 Ti
Page 108
Page 109
Page 109
Page 110
122 T10
EER
EERS
EER-Ti/T
92
www.erico.com
11/15/07
2:02 PM
Page 93
13
Page 110
Page 111
Page 111
Page 112
EER-MA
TDH
TDHP MK2
HW
Page 112
Page 113
Page 113
Page 114
WDC/WDC-M
GTD
PW2
PW2 Ti/T
Page 114
Page 115
Page 116
Page 116
4Z34-CTS
K
AB
Ti/T
Page 116
Page 117
Page 117
B-Ti/T
MAB
MEBN
www.erico.com
93
11/15/07
2:02 PM
Page 94
13
H
Hammer-on beam clamp
• Spring steel
• For fixing wire or chain
• Surface finish: CADDY® COAT
Description
170010
170020
170030
170040
2H4
4H24
4H58
4H912
A
(mm)
Max. Rec.
Load (N)
2-3
3-8
8-14
14-20
700
900
900
900
A
Ø 6,8 mm
H-i
Hammer-on threaded rod hanger
• Spring steel
• With thread impression on tab for M6 fasteners
170150
170250
Description
A
(mm)
Max. Rec.
Load (N)
4H24i
4H58i
3-8
8-14
150
150
M6
A
94
www.erico.com
11/15/07
2:02 PM
Page 95
13
H-ST
Hammer-on strap clamp
• Spring steel
• Bend strap to retain tubing on flange
173420
171500
171530
171640
Description
A
(mm)
2H4ST3
4H24ST3
4H58ST3
4H912ST3
2-3
3-8
8-14
14-20
69 mm
A
H-CT
Hammer-on beam clamp for cable ties
• Spring steel
• With slots to support pipe or tubing using cable ties
178510
178520
178530
178540
Description
A
(mm)
Max. Rec.
Load (N)
2H4CT
4H24CT
4H58CT
4H912CT
2-3
3-8
8-14
14-20
150
150
150
150
2 mm
A
B
9 mm
www.erico.com
95
11/15/07
2:02 PM
Page 96
13
H-CTB
Hammer-on beam clamp with cable tie
• Spring steel
• Comes equipped with cable ties to support pipe/tubing
Description
A
(mm)
B
(mm)
Max. Rec.
Load (N)
170170
170180
170190
170200
2H4CTBW
4H24CTBW
4H58CTBW
4H912CTBW
2-3
3-8
8-14
14-20
10-70
10-70
10-70
10-70
150
150
150
150
170210
170220
170240
170260
2H4CTBB
4H24CTBB
4H58CTBB
4H912CTBB
2-3
3-8
8-14
14-20
10-70
10-70
10-70
10-70
150
150
150
150
A
B
H-MA
• Spring steel
• With riveted fitting for threaded rods
• Inside threads M8, M10
173270
173280
173290
173300
173310
173320
173330
173340
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N)
M8MA4
M8MA24
M8MA58
M8MA912
M10MA4
M10MA24
M10MA58
M10MA912
2-3
3-8
8-14
14-20
2-3
3-8
8-14
14-20
M8
M8
M8
M8
M10
M10
M10
M10
700
700
700
700
700
700
700
700
A
Ø
96
www.erico.com
11/15/07
2:02 PM
Page 97
13
H-Ti/T
• Spring steel
• Inside thread M6, M8, M10 and plain (11 mm)
Description
174810
174820
174830
174840
174900
174910
174920
174930
174990
175000
175010
175020
160000
160010
160020
160030
M6Ti4
M6Ti24
M6Ti58
M6Ti912
M8Ti4
M8Ti24
M8Ti58
M8Ti912
M10Ti4
M10Ti24
M10Ti58
M10Ti912
TI04
TI024
TI058
TI0912
A
(mm)
Ø1
2-3
3-8
8-14
14-20
2-3
3-8
8-14
14-20
2-3
3-8
8-14
14-20
2-3
3-8
8-14
14-20
M6
M6
M6
M6
M8
M8
M8
M8
M10
M10
M10
M10
11
11
11
11
Ø2
(mm)
Max. Rec.
Load (N)
7
7
7
7
8.5
8.5
8.5
8.5
11
11
11
11
11
11
11
11
700
900
900
900
700
900
900
900
700
900
900
900
700
900
900
900
www.erico.com
97
A
Ø1
Ø2
11/15/07
2:03 PM
Page 98
13
H-S
Hammer-on strap hanger clip
• Spring steel
• For fixing straps same direction as the beam
175480
172030
171760
171770
Description
A
(mm)
Max. Rec.
Load (N)
S4
S24
S58
S912
2-3
3-8
8-14
14-20
700
900
900
900
A
H-SR
Hammer-on strap hanger clip
• Spring steel
• For fixing straps
175540
171810
175550
172020
Description
A
(mm)
Max. Rec.
Load (N)
SR4
SR24
SR58
SR912
2-3
3-8
8-14
14-20
700
900
900
900
A
25 x 6 mm
98
www.erico.com
11/15/07
2:03 PM
Page 99
13
H-MSM
Hammer-on finger close pipe clamp
• Spring steel
• Beam clamp with pipe clamp with closing mechanism
160040
160050
160060
160070
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N)
812M4SM
812M24SM
812M58SM
812M912SM
2-3
3-8
8-14
14-20
18-30
18-30
18-30
18-30
120
120
120
120
A
Ø
H-PSM
Hammer-on pipe clamp
• Spring steel
• Beam clamp with pipe clamp
175210
175220
175230
175240
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N)
12P4SM
12P24SM
12P58SM
12P912SM
2-3
3-8
8-14
14-20
22-30
22-30
22-30
22-30
70
70
70
70
A
Ø
www.erico.com
99
11/15/07
2:03 PM
Page 100
13
EM
Hammer-on clip
• Spring steel
• Hornizontal and vertical inside thread M6
Description
A
(mm)
Max. Rec.
Load (N) A
Max. Rec.
Load (N) B
EM24
EM58
EM912
3-8
8-14
14-20
450
450
450
150
150
150
170050
170060
170070
M6
A
M6
9 x 2 mm
B
EM-SM
Hammer-on clip with staked stud
• Spring steel
• Hornizontal and inside thread M6
• Vertical bolt M6 x 11 mm
170530
172060
171850
Description
A
(mm)
Max. Rec.
Load (N)
EM24SM
EM58SM
EM912SM
3-8
8-14
14-20
330
330
330
M6
A
M6 x 11
M6
100
www.erico.com
11/15/07
2:03 PM
Page 101
13
EM-P
Hammer-on pipe clamp
• Spring steel
172150
172160
175100
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N) B
8EP24
8EP58
8EP912
3-8
8-14
14-20
18-22
18-22
18-22
110
110
110
M6
A
Ø
M6
EM-M
Hammer-on finger close pipe clamp
• Spring steel
160120
160130
160140
171740
171490
173570
171800
171950
173580
171960
171970
173590
173600
173610
173620
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N) B
812EM24
812EM58
812EM912
16EM24
16EM58
16EM912
20EM24
20EM58
20EM912
24EM24
24EM58
24EM912
32EM24
32EM58
32EM912
3-8
8-14
14-20
3-8
8-14
14-20
3-8
8-14
14-20
3-8
8-14
14-20
3-8
8-14
14-20
18-30
18-30
18-30
30-35
30-35
30-35
35-42
35-42
35-42
42-50
42-50
42-50
50-60
50-60
50-60
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
www.erico.com
A
Ø
101
11/15/07
2:03 PM
Page 102
13
Rod Clip VF (Vertical Flange)
VF hammer-on clip
• Spring steel
VF14
179850
A
(mm)
Max. Rec.
Load (N)
1.5-6
600
VAFT
Installation tool
• Installation tool for VF & AF assemblies
• Used to install the AF or VF rod clips from the floor
Description
190330
VAFT
102
www.erico.com
11/15/07
2:03 PM
Page 103
13
J
Hammer-on purlin clip
• Spring steel
170370
171590
Description
A
(mm)
Max. Rec.
Load (N)
J1
J2
1.5 - 4
4 - 6.5
700
700
A ≥ 10 mm
42 mm
50 mm
Ø 6.8 mm
J-MA
Hammer-on C purlin rod clip
• Spring steel
• Size range: M8 and M10 rod sizes
• Used to support M8 and M10 threaded rod from purlin
beam flanges 1.5 mm thru 6.5 mm thick
173360
173370
173390
173400
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N) B
M8MAJ1
M10MAJ1
M8MAJ2
M10MAJ2
1.5 - 4
1.5 - 4
4 - 6.5
4 - 6.5
M8
M10
M8
M10
700
700
700
700
≥ 10 mm
A
Ø
www.erico.com
103
11/15/07
2:03 PM
Page 104
13
J-Ti/T
Hammer-on C purlin rod clip
• Spring steel
• Size range: M8 and M10 rod sizes
• Used to support M8 and M10 threaded rod from purlin
beam flanges 1.5 mm thru 6.5 mm thick
174960
175050
174970
175060
160220
160230
Description
A
(mm)
Ø1
(mm)
Ø2
(mm)
Max. Rec.
Load (N)
M8TiJ1
M10TiJ1
M8TiJ2
M10TiJ2
1.5 - 4
1.5 - 4
4 - 6.5
4 - 6.5
M8
M10
M8
M10
8.5
11
8.5
11
700
700
700
700
Description
A
(mm)
Ø 1-2
(mm)
Max. Rec.
Load (N)
T10J1
T10J2
1.5 - 4
4 - 6.5
11
11
700
700
≥ 10 mm
A
Ø1
Ø2
EBC
Beam clamp
• Spring steel
• Set screw
170380
Description
A
(mm)
M
Max. Rec.
Load (N)
EBC
<16
6
450
Ø 10.5 mm
A
M6
M6
M6
104
www.erico.com
11/15/07
2:03 PM
Page 105
13
EBC-MSM
Beam clamp with finger close pipe clamp
• Spring steel
160180
172660
172670
172680
172690
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N) B
EBC812MSM
EBC16MSM
EBC20MSM
EBC24MSM
EBC32MSM
<16
<16
<16
<16
<16
18-30
30-35
35-42
42-50
50-60
110
110
110
110
110
3Nm
Ø
A
EBC-M
Beam clamp with finger close pipe clamp
• Spring steel
160200
172590
172600
172610
172620
Description
A
(mm)
B
(mm)
Max. Rec.
Load (N) B
EBC812M
EBC16M
EBC20M
EBC24M
EBC32M
<16
<16
<16
<16
<16
18-30
30-35
35-42
42-50
50-60
450
450
450
450
450
A
ØB
www.erico.com
105
11/15/07
2:03 PM
Page 106
13
EBC-P
Beam clamp with pipe clamp
• Spring steel
• Surface Finish: CADDY® COAT
172700
172710
172720
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N) B
EBC8P
EBC12P
EBC16P
<16
<16
<16
18-22
22-30
30-35
110
110
110
A
Ø
INC8
Beam clamp
• Spring steel
• Beam clamp set that allows strut channel to be fixed
between 2 flanges of an H hot rolled beam
336290
Description
A
(mm)
Max. Rec.
Load (N)
INC8
13
450
A
6Nm
106
M8 x 25
www.erico.com
11/15/07
2:03 PM
Page 107
13
122
Purlin clip
• Purlin hanger suitable to be fixed on flanges of a
purlin that have a 35º angle
Description
A
(mm)
Max. Rec.
Load (N)
122
≤ 2.8
450
171690
A
Ø 6.8 mm
35º
≥1
5m
m
122 MA
Purlin rod clip
• Inside thread M8, M10
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N) B
174690 122 M8MA
174700 122 M10MA
≤ 2.8
≤ 2.8
M8
M10
450
450
A
35º
Ø
www.erico.com
107
≥1
5m
m
11/15/07
2:03 PM
Page 108
13
122 Ti
Purlin rod clip
174980
175070
Description
A
(mm)
Ø1
(mm)
Ø2
(mm)
Max. Rec.
Load (N)
122M8Ti
122M10Ti
≤ 2.8
≤ 2.8
M8
M10
8,5
11
450
450
A
35º
≥1
5m
m
122 T10
Purlin rod clip
160240
Description
A
(mm)
Ø1
(mm)
Ø2
(mm)
Max. Rec.
Load (N)
122 T10
≤ 2.8
11
11
450
A
35º
≥1
5m
m
108
www.erico.com
11/15/07
2:03 PM
Page 109
13
EER
Decking clip
• Spring steel
Description
171470
EER
A
(mm)
Max. Rec.
Load (N)
0.8 - 2
2-3
450
900
Ø 7 mm
A
Ø 6.80 mm
EERS
Decking clip with strap hanger
• Spring steel
• For fixing straps
Description
173080
EERS
A
(mm)
Max. Rec.
Load (N)
0.8 - 2
2-3
450
900
Ø 7 mm
A
6 mm
25 mm
www.erico.com
109
11/15/07
2:03 PM
Page 110
13
EER-Ti/T
Decking clip with rod hanger
• Spring steel
• Inside thread M8, M10 or 11 mm
Description
173130
EERM8Ti
173140
EERM10Ti
160250
EERT10
A
Ø1
(mm) M/mm
0.8 - 2
2-3
0.8 - 2
2-3
0.8 - 2
2-3
Ø2
(mm)
Max. Rec.
Load (N) B
M8
8.5
M10
11
450
900
450
900
450
900
11
11
Ø1
Ø2
EER-MA
Decking clip with rod hanger
• Spring steel
Description
173180
173190
A
(mm)
Ø
(mm)
Max. Rec.
Load (N) B
0.8 - 2
2-3
0.8 - 2
EERM10MA
2-3
M8
M8
M10
M10
450
700
450
700
EERM8MA
Ø 7 mm
A
Ø
110
www.erico.com
11/15/07
2:04 PM
Page 111
13
TDH
Decking hanger
• Spring steel
• Without thread connection
• Allows quick fixing against trapeze type ceilings
Ø 10.5 mm
Description
A
179920
179930
179940
179950
179510
179945
179955
TDH
TDHM6
TDHM8
TDHM10
TDHiM8
TDHAM8
TDHAM10
Max. 50 mm
TDH
TDH iM8
Ø 6.8 mm
Ø 6.8 mm
Ø M8
19 mm
23 mm
Ø 14 mm
TDH M
Ø M6,8,10
TDH AM8
TDH AM10
VKM
TDHP MK2
Decking hole punch tool
• Makes holes in the side of trapeze ceilings
• Painted
Description
159441
159442
Max. 50 mm
TDHP MK2
BLADE SET
Ø 10.5 mm
www.erico.com
111
Ø M8
M10
A
mm
Max. Rec.
Load (N)
0.63 - 0.70
0.70 - 0.80
0.80 - 1.00
1.00 - 1.20
1.20 - 1.50
> 1.50
TDH iM8
600
700
800
1000
1200
1500
200
11/15/07
2:04 PM
Page 112
13
HW
Wedge nut for Holorib
• V shaped nuts for Holorib ceilings
• Surface finish: Electro-zinc plated
187280
187290
187300
188740
188780
188840
188850
Description
A
(mm)
B
(mm)
C
(mm)
M
dº
HW8
HW10
HW12
HW6M
HW8M
PHW6
PHW8
25
25
25
19
19
18
18
12
12
16
9.5
9.5
9.5
9.5
12
12
16
9.5
9.5
9.5
9.5
M8
M10
M12
M6
M8
M6
M8
15°
15°
15°
15°
15°
25°
25°
dº
M
A
C
B
WDC/WDC-M
Decking insert
• Spring steel
• Hole accepts M8 or M10 bolts or rod
160920
160930
Description
Ø
Max. Rec.
Load (N)
WDCM8
WDCM10
M8
M10
900
900
Ø
53 mm
30.8 mm
> 10 mm
22 mm
43 - 45 mm
112
www.erico.com
11/15/07
2:04 PM
Page 113
GTD
Decking insert with rod hanger
• For fixing to metal decking with hole for threaded rods
• Inside thread M8, M10 or a hole 11 mm
B
C
55 mm
Ø
Description
160330 M8GTD12-17
160340 M10GTD12-17
160360 M8GTD17-22
160370 M10GTD17-22
160380 10GDT12-17
160390 10GTD17-22
B
(mm)
C
M/mm
Ø
(mm)
Max. Rec.
Load (N)
12-17
12-17
17-22
17-22
12-17
17-22
>14
>14
>16
>16
>14
>16
M8
M10
M8
M10
10.5
10.5
900
900
900
900
900
900
PW2
Purlin clip
• Spring steel
175590
Description
Max. Rec.
Load (N)
PW2
700
19.5 mm
12.5 mm
9
mm
6.8 37.5 mm
mm
7.8 mm
2 mm
www.erico.com
113
13
11/15/07
2:04 PM
Page 114
13
PW2 Ti/T
Purlin rod clip
• Spring steel
Description
175610 PW2M8Ti IN
175620 PW2M10Ti IN
175630 PW2T10Ti IN
Ø1
(mm)
Ø2
(mm)
Max. Rec.
Load (N) B
M8
M10
11
8.5
11
11
700
700
700
12.5 mm
52 mm
Ø1
Ø2
4Z34-CTS
Rod mounted cable tray support
• Spring steel
• Hangs from threaded rod
• With riveted fitting to support wire tray
172950
172960
Description
ØM
4Z34CTS
6Z34CTS
M4 - M8
M8 - M12
35 x 6.5 mm
68 mm
ØM
114
www.erico.com
11/15/07
2:04 PM
Page 115
K
Rod mounted tubing support
• Spring steel
• Conduit/pipe hanger from flange, wire
or plain rod*
• No installation tools required
*For horizontal applications only
170870
170660
170670
170680
170690
Description
ØA
(mm)
ØB
(mm)
B
(mm)
KX
K8
K12
K16
K20
5 - 10
14 - 18
19 - 25
25 - 32
35 - 44
4-8
4 - 6.5
4 - 6.5
4 - 6.5
4 - 6.5
2
2
2
2
-
A+B
(mm)
10
20
24
30
44
10
10
12
13
-
Max. Rec.
Load (N)
Max. Rec.
Load (N1)
220
220
220
220
110
110
110
110
16
24
29
37
48
ØB
ØA
N1
ØB
B
ØA
ØA
N
N
www.erico.com
115
13
11/15/07
2:04 PM
Page 116
13
AB
Angle bracket
• Permits wire or chain drops from concrete or wood
171120
Description
Max. Rec.
Load (N)
AB
700
Ti/T
Rod hanger
• Rod hanger for wood applications
• Inside thread M6, M8, M10 or 11 mm
174800
170900
170910
160260
Description
Ø1
(mm)
Ø2
(mm)
Max. Rec.
Load (N) B
M6Ti
M8Ti
M10Ti
T10
M6
M8
M10
11
7.5
8.5
11.5
11.5
700
700
700
700
7 mm
Ø1
Ø2
B-Ti/T
Ceiling mounted rod hanger
• Permits rod drops from concrete or wood
174940
175030
160280
Description
Ø1
(mm)
Ø2
(mm)
Max. Rec.
Load (N) B
M8TiB
M10TiB
T10B
M8
M10
11
8.5
11
11
700
700
700
7 mm
Ø1
Ø2
116
www.erico.com
11/15/07
2:04 PM
Page 117
MAB
Ceiling mounted rod hanger
• Permits rod drops from concrete or wood
173440
173450
Description
Ø
Max. Rec.
Load (N)
M8MAB
M10MAB
M8
M10
700
700
7 mm
Ø
MEBN
Rod clip
• Spring steel
• Used to secure objects on smooth rod
172130
172140
Description
A
(mm)
8MEBN
10MEBN
8
10
www.erico.com
ØA
117
13
11/15/07
118
2:04 PM
Page 118
www.erico.com
11/15/07
2:04 PM
Page 119
14
CADDY® SPEED LINK
NEW
Page 120
Page 121
Page 122-123
CADDY SPEED LINK
CADDY SPEED LINK LD
Tools & Accessories
®
®
www.erico.com
119
11/15/07
2:04 PM
Page 120
CADDY® SPEED LINK
14
CADDY® SPEED LINK
Universal wire rope fixing system
• Reduces installation time and inventory
• Works with a variety of CADDY® Fasteners or as
a stand-alone system without drilling into the
building structure
• Increases installation versatility by allowing objects
to be hung at an angle
• Allows for easy adjustments of supported
objects both during and after installation
• Minimizes vibration and system wear and tear
with a strong, yet flexible wire rope
• Holds working loads of up to 900N with
a 5:1 safety factor
• Meets the fire rating requirements of DIN 4102-2
for 30 minutes at 30 percent of rated load
B2
DIN EN
135011:E
2 mm CADDY SPEED LINK wire rope
Rope Ø
(mm)
195800
195805
195810
195815
195820
2
2
2
2
2
Rope L Max. Rec.
(mm)
Load (N)
1
2
3
5
10
450
450
450
450
450
3 mm CADDY SPEED LINK wire rope
Rope Ø
(mm)
195825
195830
195835
195840
195845
3
3
3
3
3
Rope L Max. Rec.
(mm)
Load (N)
1
2
3
5
10
900
900
900
900
900
120
www.erico.com
11/15/07
2:04 PM
Page 121
14
CADDY® SPEED LINK
CADDY® SPEED LINK LD
Universal wire rope fixing system
• Holds working loads of 200N with a 5:1
safety factor
• Comes with a sleek, low-profile locking device that
minimizes visual impact
• Allows for easy adjustments of supported objects
both during and after installation
• Available upon special request with stainless steel
wire rope for applications where a higher level of
corrosion resistance is required
• Works with a variety of CADDY® Fasteners
including beam clamps and purlin clips (see chapter 13)
• Meets the fire rating requirements of DIN 4102-2
for 30 minutes at 30 percent of rated load
• Stainless steel versions available upon special request
1.5 mm CADDY SPEED LINK wire rope
Rope Ø
(mm)
195950
195920
195955
195925
195930
1.5
1.5
1.5
1.5
1.5
Rope L Max. Rec.
(mm)
Load (N)
1
2
3
5
10
200
200
200
200
200
www.erico.com
121
NEW
B2
DIN EN
135011:E
11/15/07
2:04 PM
CADDY® SPEED LINK
Page 122
14
SLWC
Wire rope cutter
• Designed for the CADDY® SPEED LINK wire rope systems
• Special formed cutter prevents the unravelling of
the wire rope
• Plastic moulded grips
• Limited force required
195853
SLADCP
Ducting edge and surface protection
• For square ducting
• Plastic construction with pre-formed wire guides
• Ensures good wire rope location
50 mm
195851
52 mm
14 mm
52 mm
SLADS
m
m
Fixing brackets
• Universal model, to accept wire rope or hook
• Secured with blind rivets or self drilling screws
m
m
20
4.2 mm
8
195852
15 mm
1,5 mm
20 mm
122
www.erico.com
11/15/07
2:04 PM
Page 123
14
CADDY® SPEED LINK
SLESM
Eye bolts
• Metric thread
195854
195856
MxL
Ø
(mm)
A
(mm)
M6 x L30
M8 x L40
7.0
8.5
20
25
A
M
Ø
L
SLESH
Eye bolts
• Wood thread
195858
MxL
Ø
(mm)
A
(mm)
H6 x L60
8.75
32
A
H
Ø
L
SLWPT
Sound reduction tubing
• Designed for 2 mm and 3 mm wire rope
• Surface protection and insulating properties
195859
www.erico.com
123
11/15/07
124
2:04 PM
Page 124
www.erico.com
11/15/07
2:05 PM
Page 125
15
Page 126
Page 126
Page 127
Page 127
SBFF
SGBC
SBMF
SBMK
Page 128
Page 128
SBFK
KIT U SILENT
www.erico.com
125
11/15/07
2:05 PM
Page 126
15
SBFF
Sound insulator female female
• Max load 1500N
• For tensile load
• Temperature range -30°C up to +90°C
M
588440
588430
8-8
6-6
Ø
(mm)
Max. Rec.
Load (N)
39
39
1500
1500
Ø
M
- 30°/+90°
SGBC
Heavy duty sound insulator
• Fixing holes for M18 max.
• Max load 7000N
• For tensile and compressive load
588500
ØA
(mm)
ØB
(mm)
Max. Rec.
Load (N)
18.3
80
7000
- 30°/+90°
ØA
ØB
126
www.erico.com
11/15/07
2:05 PM
Page 127
15
SBMF
Sound insulator male female
• Max load 1500N
• For tensile load
M1
588560
588570
588580
8
8
10
M2
8
10
10
Ø
(mm)
39
39
39
Max. Rec.
Load (N)
M1
- 30°/+90°
Ø
1500
1500
1500
M2
SBMK
Sound insulator male male
• Max load 600N
• For compressive load and bending
M
588610
8-8
Ø
(mm)
Max. Rec.
Load (N)
40
600
www.erico.com
M
Ø
127
- 30°/+90°
11/15/07
2:05 PM
Page 128
15
SBFK
Sound insulator female female
• Max load 600N
• For compressive load and bending
M
588620
8-8
Ø
(mm)
Max. Rec.
Load (N)
40
600
Ø
M
- 30°/+90°
KIT U SILENT
Universal-Fixing Kit with sound/vibration
absorbers
• Contains:
- Wall fixing profiles 300 mm, 2 No.
- Cantilever arms, 2, c/w fixing screws and end caps
- Sound absorbers with stud M8, 4 No.
• For wall mounting of air conditioning units
• Easy height adjustment
- 30°/+90°
589980
589990
Max. Rec.
Load (N)
L
(mm)
1000
730
450
600
L
128
www.erico.com
11/15/07
2:05 PM
Page 129
16
CADDY® PYRAMID
Page 130
CADDY PYRAMID 50
®
NEW
NEW
NEW
NEW
Page 131
Pages 132
Page 132-133
CADDY PYRAMID 25
CADDY PYRAMID 150
CADDY® PYRAMID 300
CADDY® PYRAMID 600
CADDY® PYRAMID 600
®
®
See the CADDY® PYRAMID website at www.erico.com/caddypyramid
www.erico.com
129
11/15/07
2:05 PM
Page 130
CADDY® PYRAMID
16
CADDY® PYRAMID 50
NEW
• Dramatically reduces installation time by replacing slow,
heavy and labor-intensive methods for supporting pipes,
conduits, cable tray and equipment on roofs and below
raised floors
• Protects the roof membrane while absorbing shock and vibration,
but will not absorb water
• Metal cover protects against weather and other environmental
conditions, such as damage caused by birds
• Easily increase load capacity by combining similar CADDY
PYRAMID supports
• Polyethylene closed-cell foam and 1,5 mm steel construction
• CADDY PYRAMID has been load tested to a 5-to-1 safety factor
• Electro-galvanized (P1) or hot-dip galvanized (P3) finish on the rooftop version and CADDY® COAT
(P7) on the plenum version provide superior corrosion protection
• Multilayer corrosion protection (P22) coating available for highly corrosive environments
• Independent accelerated weather tested for outdoor performance
• Finish: Electro-zinc plated (EG), Multi-layer Corrosion Protection (MCP)
Fig.
No.
182470
182480
182500
182510
182515*
182520*
4
5
4
5
4
5
Description
Max. Rec.
L
W
H
Load (N) (mm) (mm) (mm)
CADDY RPS50H4EG
CADDY RPS50H6EG
CADDY RPS50H4HD
CADDY RPS50H6HD
CADDY RPS50H4MCP
CADDY RPS50H6MCP
220
220
220
220
220
220
264
264
264
264
264
264
101
127
101
127
101
127
Finish
101
152
101
152
101
152
EG
EG
HDG
HDG
MCP
MCP
*Not available until mid 2008.
68,3 mm RPS50AHSV
101 mm RPS50H4
152 mm RPS50H6
H
W
L
101 mm RPS50H4
127 mm RPS50H6
264 mm
Fig. 4 & 5
Electro-zinc plated
130
www.erico.com
11/15/07
2:05 PM
Page 131
16
CADDY® PYRAMID
CADDY® PYRAMID 25
NEW
• Fast click-in installation, No tools or fasteners needed
• Sled design protects the roof membrane
• Lightweight, all-plastic construction weighs less than 0,15 kg
• Small 100 x 127 mm footprint
• UV-resistant
• Handles up to three 1/2” (21,3 mm) or two 3/4” (26,9 mm)
or one 1” (33,7 mm) pipes/conduit
Fig.
No.
182450
182460
1
2
Description
Max. Rec.
CADDY PPRPS25H4, Height 92 mm
CADDY PPRPS25H6, Height 143 mm
Load (N)
110
110
L
W
H
(mm) (mm) (mm)
119
144 112
119
144 163
25
mm
20 mm
92 mm
119 mm
L
H
144 mm
Fig. 1
W
25
mm
20 mm
H
143 mm
119 mm
L
144 mm
Fig. 2
W
www.erico.com
131
11/15/07
2:05 PM
Page 132
CADDY® PYRAMID
16
CADDY® PYRAMID 150
CADDY® PYRAMID 300
CADDY® PYRAMID 600
NEW
• Innovative lightweight design Protects the roof membrane
while absorbing shock and vibration, but will not absorb water
• Independently accelerated weather tested for outdoor performance
• Has six M10 threaded inserts with captive nuts that allow the
product to be used with standard pipe clamps and accessories
• Large footprint bases distributes load more evenly than
alternative methods
• RPS 150 - polyethylene closed-cell foam and 2 mm
steel construction supports 680 N with each
RPS 150 support
• RPS 300 - Crosslink polyethylene closed-cell foam
and 2 mm steel construction supports up to 1350 N
with each RPS 300 support
• RPS 600 - Consists of two CADDY PYRAMID 300
bases tied together with a length of strut and
supports up to 2700 N with each RPS 600 support
• CADDY PYRAMID has been load tested to a 5-to-1
safety factor
• Easily increase load capacity by combining similar
CADDY PYRAMID supports
• Multilayer corrosion protection (P22 or MCP)
coating is available for environments where a higher
degree of corrosion resistance is desired, such as
areas where hot-dipped galvanized finishes are
used today.
• P11 and P13 post bases (see chapter 18) are used to
construct support structures with CADDY ERISTRUT
• Finish: Electro-zinc plated (EG), Multi-layer
Corrosion Protection (MCP)
Fig.
No.
182680
182690
182700
182710
182720
6
7
6
7
8
Fig.
No.
182580
182590
182620
182630
182650
6
7
6
7
8
Description
CADDY
CADDY
CADDY
CADDY
CADDY
Max. Rec.
L
W
H
RPS150T7
RPS150T8
RPS300T7
RPS300T8
RPS600T8
666
666
1324
1324
2648
Description
CADDY
CADDY
CADDY
CADDY
CADDY
406
406
406
406
812
305
305
305
305
305
81
100
81
100
100
Max. Rec.
L
W
H
RPS150T3
RPS150T4
RPS300T3
RPS300T4
RPS600T4
666
666
1324
1324
2648
406
406
406
406
812
305
305
305
305
305
81
100
81
100
100
Finish
With
Strut
EG
EG
EG
EG
EG
No
Yes
No
Yes
Yes
Finish
With
Strut
MCP
MCP
MCP
MCP
MCP
No
Yes
No
Yes
Yes
132
www.erico.com
11/15/07
2:06 PM
Page 133
16
CADDY® PYRAMID
W
Fig. 6
305 mm
81 mm
100 mm
81
mm
H
406 mm
W
305 mm
L
H
406 mm
Fig. 7
L
W
305 mm
100 mm
81
mm
H
820 mm
Fig. 8
L
Stands the test of time
• Independent accelerated weather testing verifies CADDY PYRAMID’s performance
• Passed ASTM A 370-30A for mechanical pull testing between -40º C (-40º F) and
+65º C (+150º F)
• Passed ASTM G154 on foam construction for accelerated UV exposure test
• Once installed, CADDY PYRAMID will not creep due to compression at rated loads
• Multilayer corrosion protection (P22) coating adds a higher level of protection
for tough weather environments, with superior protection to a hot dipped
galvanized finish
www.erico.com
133
11/15/07
134
2:06 PM
Page 134
www.erico.com
11/15/07
2:06 PM
Page 135
17
C-PROFILE SYSTEM
NEW
NEW
NEW
NEW
Page 136
Page 137
Page 138
Page 138
EOL
C-EOL
CFIX
CFIX
NEW
N EW
N EW
Page 139
Page 139
Page 140
ECN EOL/EO
KP
ADK
www.erico.com
135
11/15/07
2:06 PM
Page 136
C-PROFILE SYSTEM
17
EOL
C-Channel 27/18
• For light applications
• For individual fastening or for the efficient construction
of pipe or tube routes
• Length 2 metre
• Congruent hole pattern
• Universally applicable for front-wall and shelf installations
• A complete range of accessories for the construction
of bracketry
• Finish: Pre-galvanised
L
(m)
599996
BxAxS
(mm)
2 27 x 18 x 1.25
NEW
C
(mm)
O
(mm)
DxE
(mm)
H
(mm)
15.5
10.5
8.5 x 20
30
1500
q
f
1200
L
f
A
z
900
H
y
N
S
y
z
O
B C
A
600
D
E
!
⑁zul =160 N/mm2
fzul =l/200
136
f
B
C
ly
lz
Sc
St
A
mm4
mm4
mm
mm
mm2
8791
2788
8.336
9.665
65.57
300
0
250
500
750
1000 1250 1500 1750 2000
mm
www.erico.com
11/15/07
2:06 PM
C-PROFILE SYSTEM
Page 137
17
N EW
C-EOL
Cantilever arm, light duty 27/18
• Same perforation as E0L channel
• For wall mounted pipe runs
• Universally applicable for shelf installations
• Length 180 mm or 300 mm
• A complete range of accessories for the construction
of bracketry
L
(mm)
599879
599880
BxAxS
(mm)
180 27 x 18 x 1.25
300 27 x 18 x 1.25
C
(mm)
O
(mm)
DxE
(mm)
H
(mm)
15.5
15.5
10.5
10.5
8.5 x 20
8.5 x 20
30
30
600
500
L
400
H
S
O
B C
N 300
D
A
200
E
100
40
4
0
160
180
200
220
!
120
240
280
A
F1
B
F
F1
D
C
z
y
y
z
www.erico.com
137
300
q
F
⑁zul =160 N/mm2
fzul =l/200
11x18
260
mm
ly
lz
Sc
St
A
mm4
mm4
mm
mm
mm2
8791
2788
8.336
9.665
65.57
11/15/07
2:06 PM
Page 138
C-PROFILE SYSTEM
17
C-FIX
Channel nut with flat washer
• Universal fixing for channels with openings
ranging from 13 mm to 15.5 mm
• A 90º turn positions the nut into place in the channel
NEW
M
M
584500
584510
584520
6
8
10
C-FIX
Channel nut with pre-mounted stud and flat washer
• Universal fixing for channels with openings
ranging from 13 mm to 15.5 mm
• Pre-mounted for use with pipe clips or other
channel accessories
• Easy to install
• By turning the nut 90º it will snap in the right
position in the channel as seen above
• Height adjustable
NE W
M
MxL
584530
584560
L
M8 x 30
M10 x 40
138
www.erico.com
11/15/07
2:06 PM
Page 139
17
C-PROFILE SYSTEM
ECN EOL/EO
NEW
Channel nut
• For channels EOL & EO
• Threads M6, M8 or M10
315370
315340
315350
EOL / EO
EOL / EO
EOL / EO
M
(mm)
A
(mm)
B
(mm)
S
(mm)
6
8
10
25
25
25
14
14
14
4
4
4
A
S
B
KP
NEW
T-bolts
• For channels EOL/EO/EI
• Pre-mounted for use with pipe clips or other
channel accessories
• Easy to install
590076 EOL/E0/E1
590077 EOL/E0/E1
Ø
MxL
AxB
(mm)
8 x 30
8 x 40
25 x 14
25 x 14
M
L
A
M
B
www.erico.com
139
11/15/07
2:06 PM
Page 140
C-PROFILE SYSTEM
17
ADK
End cap
• Fits on to the end of C-channels and cantilever arms
• Aesthetically pleasing
• Reduces possible injury
• Finish: Plastic, black
313301
NEW
EOL
140
www.erico.com
11/15/07
2:06 PM
Page 141
18
Page 144
Page 144
Page 145
Page 145
41 x 41
41 x 21
Slotted Angle
KH
Page 146
Page 146
Page 147
Page 148
ECB
ISSP
CADDY SLICK NUT
STS
Page 149
Page 149
Page 150
Page 150
UM
UA
UD
ZTA605
Page 151
Page 151
Page 151
Page 152
ADK 421
Profile Capping
ZTA601
ZT606
www.erico.com
®
141
11/15/07
2:07 PM
Page 142
18
Page 152
Page 152
Page 153
Page 153
ZZ704
INC8
ZEA110
ZEA100
Page 153
Page 154
Page 154
Page 154
ZEA102
ZEA104
ZEA106
ZEA107
Page 155
Page 155
Page 156
Page 156
ZEA108
ZEA109
ZWA 200
ZWA202
Page 156
Page 157
Page 157
Page 157
ZWA203
ZWA205
ZWA207
ZWA209
142
www.erico.com
11/15/07
2:07 PM
Page 143
18
Page 158
Page 158
Page 159
Page 159
ZZA702
ZSA301
ZUA400
ZUA401
Page 159
Page 160
Page 160
Page 160
ZWA214
ZWA215
ZSA304
ZGA501
Page 161
Page 161
Page 162
Page 162
ZZA701
P11
P13
ROL10
Page 162
ROL11
www.erico.com
143
11/15/07
2:07 PM
Page 144
18
CADDY® ERISTRUT CHANNEL
2.5 mm Strut
• 41 mm x 41 mm
• For heavy applications
• For individual fastening or for efficiently constructing pipe
or tube routes
• Standard lengths: 3 m, 6 m
• Finish: Hot dip galvanised (HDG) and Stainless steel (SS)
Description
ES4141PLX6
ES4141SLOTX6
310326
ES1000
ES1000T
310221
ERISTRUT,
ERISTRUT,
ERISTRUT,
ERISTRUT,
ERISTRUT,
ERISTRUT,
41 X 41 X 2.5 mm
41 X 41 X 2.5 mm Slotted
AC-2 41 X 41 X 2.5 mm Slotted
41 X 41 X 2.5 mm
AAC 41 X 41 mm Back to Back
L
(M)
Configuration
Finish
6
6
6
3
3
3
Plain
Slotted
Slotted
Plain
Slotted
Back to Back
HDG
HDG
S/S
HDG
HDG
HDG
L
(M)
Configuration
Finish
6
6
6
3
3
Slotted
Plain
Slotted
Plain
Slotted
S/S
HDG
HDG
HDG
HDG
See technical section for loading data
See chapter 20 for complete range of Stainless steel
2.5 mm Strut
• 41 mm x 21 mm
• For medium – heavy applications
or tube routes
• Standard lengths: 3 m and 6 m
• Finish: Hot dip galvanised (HDG) and Stainless steel (SS)
Description
310265
ES4121PLX6
ES4121SLOTX6
ES3300
ES3300T
ERISTRUT,
ERISTRUT,
ERISTRUT,
ERISTRUT,
ERISTRUT,
AC-2 41 X 21 X 2.5 mm Slotted
41 X 21 X 2.5 mm
41 X 21 X 2.5 mm
See chapter 20 for complete range of Stainless steel
144
www.erico.com
11/15/07
2:07 PM
Page 145
18
CADDY® ERISTRUT SLOTTED ANGLE
Slotted Angle Bracket
•
•
•
•
•
2.5 mm and 4.5 mm
For light-medium applications
For efficiently constructing fire pipe or HVAC ducting routes
Standard lengths: 3 m
Description
EA3030
EA5050
L
(M)
Configuration
Material
Thickness (mm)
Slot
Size (mm)
3
3
Slotted
Slotted
2.5
4.5
11 x 18
14 x 30
30 mm x 30 mm Zinc Plated
50 mm x 50 mm Zinc Plated
CHANNEL BRACKET KH
Strut Bracket
• Strut bracket for attachment to CADDY® ERISTRUT or
other structural member
• Fits all standard strut depths
Description
KH10C
KH5C
KH6C
KH11C
KH15C
KH12C
KH16C
KH13C
KH8C
KH9C
KH14C
KH
KH
KH
KH
KH
KH
KH
KH
KH
KH
KH
Cantilever
Cantilever
Cantilever
Cantilever
Cantilever
Cantilever
Cantilever
Cantilever
Cantilever
Cantilever
Cantilever
Arm,
Arm,
Arm,
Arm,
Arm,
Arm,
Arm,
Arm,
Arm,
Arm,
Arm,
150
200
250
300
400
450
550
600
650
700
750
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
www.erico.com
A
(mm)
B
(mm)
125
125
125
125
125
125
125
125
125
125
125
150
200
250
300
400
450
550
600
650
700
750
145
Ø 14 mm
B
A
11/15/07
2:07 PM
Page 146
18
CHANNEL BRACKET ECB
Supported Strut Bracket
• Strut bracket that attaches to strut
• Fits all standard strut depths
Ø 14 mm
B
(mm)
Description
ECB150
ECB300
ECB450
ECB600
Braced
Braced
Braced
Braced
Cantilever
Cantilever
Cantilever
Cantilever
Arms,
Arms,
Arms,
Arms,
320
470
635
780
mm
mm
mm
mm
B
320
470
635
780
A
ISSP
ISSP strut to threaded rod connector
• Ideal for retrofitting strut to existing trapeze
• Eliminates precise cutting of strut and the need for
multiple hardware pieces
• Supplied with installed hex head set screw
• M6, M8 and M10 all include 2 ISN nuts and is load
rated to 970N
• See Chapter 19 for ISN nuts
• Finish: Electro-galvanized
Description
ISSP
ISSP M6
ISSP M8
ISSP M10
190800
190810
190820
190830
146
www.erico.com
11/15/07
2:07 PM
Page 147
18
CADDY® SLICK Strut Nut
Channel nut
• Fast fixing method for threaded rods on to CADDY®
ERISTRUT channel
• Tighten with a hex nut
• CADDY SLICK is available with thread connections from
M6 up to M12
• Finish: CADDY® COAT
Rod
Size
174460
174340
174350
174550
M6
M8
M10
M12
Max. Rec.
Max. Rec.
Load (N) F1 Load (N) F2
588
588
588
588
Max. Rec.
Load (N) F3
735
735
735
735
1226
1471
1226
1471
Features
• Drastically reduce threaded rod installation time
• No more tangled spring nuts
• Installs with one hand utilizing plastic spring
F3
LOAD
F1
LOAD
www.erico.com
F2
LOAD
147
11/15/07
2:07 PM
Page 148
18
CHANNEL CLAMP STS
(STRUT-TO-STRUT)
Strut-to-Strut Clamp
• Surface Finish: Electro-zinc plated
• Provides fast assembly of back-to-back half-slot strut
as an alternative to welded strut
• Unique one-piece assembly eliminates the need for
washers, bolts and nuts
• For new or retrofit applications
• Allows joining of dissimilar half-slot channel, regardless
of profile size or finish
• Easy installation with a 1/2” nut driver
Part
Number
STS
A
(mm)
B
(mm)
C
(mm)
Max. Working
Load (N)
Recommended
Torque
25
12.7
32
4447
6.8 Nm
SW13 or
socket
*1000 lbs working load per total assembly (5:1 safety factor). Not to exceed
1000 lbs. Half-slot dimensions vary by manufacturer. Minimum half-slot
dimensions 14 mm x 22 mm. Strut type and structure need to be evaluated to
establish load for assembly. Use 1 STS per 300 mm of strut, minimum of 2
required.
A
B
C
148
www.erico.com
11/15/07
2:07 PM
Page 149
18
CADDY® ERISTRUT CHANNEL NUT
UM
•
•
•
•
Size M6-M16
Serrated nuts to suit CADDY ERISTRUT channels
Fits on to all CADDY ERISTRUT channels
Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
314995
315015
315025
315035
315036
315000
315010
315020
315030
315037
M
(mm)
H
(mm)
Finish
Nm
6
8
10
12
16
6
8
10
12
16
5
6
8
8
8
5
6
8
8
8
12
28
55
95
125
12
28
55
95
125
EG
EG
EG
EG
EG
HDG
HDG
HDG
HDG
HDG
M
H
UA
•
•
•
•
Size M6-M12
Serrated nuts to suit CADDY ERISTRUT channels
Fits on to all CADDY ERISTRUT channels
Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
315085
315095
315105
315115
315080
315090
315100
315110
M
(mm)
H
(mm)
Nm
Finish
6
8
10
12
6
8
10
12
5
6
8
8
5
6
8
8
12
28
55
95
12
28
55
95
M
EG
EG
EG
EG
HDG
HDG
HDG
HDG
NEED images w/ strut
www.erico.com
149
H
11/15/07
2:08 PM
Page 150
18
UD
• Size M6-M12
• Serrated nuts to suit CADDY ERISTRUT channels
• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
315045
315055
315065
315075
315040
315050
315060
315070
M
(mm)
H
(mm)
Finish
Nm
6
8
10
12
6
8
10
12
5
6
8
8
5
6
8
8
12
28
55
95
12
28
55
95
EG
EG
EG
EG
HDG
HDG
HDG
HDG
M
NEED images w/ strut
H
ZTA605
Beam clamp internal
• Structural attachment to beams to support
CADDY® ERISTRUT
• For M12 screw
388080
150
www.erico.com
11/15/07
2:08 PM
Page 151
ADK 421
Profile end caps blue
• Material: Polyethylene (PE)
313305
41 x 41
41 x 21
DLP
Profile capping, white plastic
• Finish: Polyvinychloride
313310
ZTA601
Beam clamp
CADDY® ERISTRUT
• To attach strut to structural I-Beams
387700
41 mm x 21 mm back to back
41 mm x 21 mm
41 mm x 41 mm
www.erico.com
151
18
11/15/07
2:08 PM
Page 152
18
ZT606
Profile end bracket
• Fasten CADDY® ERISTRUT to beam
313270
ZZ704
Window bracket
CADDY® ERISTRUT
313870
41 x 41
INC8
Spring steel fastener
• Beam clamp set that allows strut channel to be
fixed between 2 flanges of an H hot rolled beam
• Finish: CADDY® COAT
336290
A
(mm)
Max. Rec.
Load (N)
13
450
152
www.erico.com
11/15/07
2:08 PM
Page 153
ZEA110
Wide tee plate
• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware
• For M12 hardware
387450
ZEA100
Square washer
387500
ZEA102
2 hole flat plate
387520
www.erico.com
153
18
11/15/07
2:08 PM
Page 154
18
ZEA104
4 hole flat plate
• End to end channel connections to create metal frames
with CADDY® ERISTRUT channels and CADDY ERISTRUT
hardware
387540
ZEA106
3 hole adjustable flat plate
• Angle channel plate to create metal frames with
CADDY® ERISTRUT channels and CADDY ERISTRUT
hardware
387560
ZEA107
Right angle bracket
• 90º angle bracket to create metal frames with
hardware
387570
154
www.erico.com
11/15/07
2:08 PM
Page 155
ZEA108
Tee bracket
• Tee bracket to create metal frames with
hardware
387580
ZEA109
Cross plate
• Intersection cross plate to create metal frames with
hardware
387590
www.erico.com
155
18
11/15/07
2:08 PM
Page 156
18
ZWA 200
Angle bracket 2 holes
• Finish: Hot dip galvanised
313330
387600
+
-
ZWA202
• Angle bracket to create metal frames with CADDY®
ERISTRUT channels and CADDY ERISTRUT hardware
387620
ZWA203
387630
156
www.erico.com
11/15/07
2:08 PM
Page 157
ZWA205
387650
ZWA207
387670
ZWA209
Wide tee angle bracket 4 holes
387690
www.erico.com
157
18
11/15/07
2:08 PM
Page 158
18
ZZA702
Transversal support bracket
387720
ZSA301
Single cross over bracket 41 mm x 41 mm
387740
158
www.erico.com
11/15/07
2:09 PM
Page 159
ZUA400
Offset tee bracket 41 mm x 41 mm
387750
ZUA401
Offset tee bracket 41 mm x 21 mm
387760
ZWA214
Offset angle bracket left
387890
56
www.erico.com
90
159
18
11/15/07
2:09 PM
Page 160
18
ZWA215
Offset angle bracket right
387900
ZSA304
Corner angle bracket
388110
ZGA501
Single base plate
388270
160
www.erico.com
11/15/07
2:09 PM
Page 161
18
ZZA701
Transveral corner bracket
388400
STRUT POST BASE P11
Post Base for Channel
• Post base to create metal frames for attachment
to CADDY® ERISTRUT and/or CADDY® PYRAMID, see
Chapter 16
P110000HD
A
(mm)
B
(mm)
C
(mm)
150
150
89
Fits on CADDY® PYRAMID 150 and 300 models
C
A
FITTING SPECIFICATIONS (unless noted otherwise):
Hole sizes 14 mm, Spacing 20 mm from edge and 47 mm on center
Width 41 mm, Thickness 6 mm, Standard Finish: HDG
www.erico.com
161
20 mm
B
11/15/07
2:09 PM
Page 162
18
STRUT POST BASE P13
Post Base for Welded Channel
• Post base to create metal frames for attachement
to CADDY® ERISTRUT and/or CADDY PYRAMID, see
Chapter 16
P130000HD
A
(mm)
B
(mm)
C
(mm)
150
150
89
C
C
A
A
Width 41 mm, Thickness 6 mm, Standard Finish: HDG
20
mm
20 mm
BB
STRUT TROLLEY ROL10
Single Trolley
• Wheels: 35 mm diameter
• Finish: Electro-zinc
plated (EG)
ROL10000EG
mm
14 14
mm
STRUT TROLLEY ROL11
Double Trolley
• Wheels: 35 mm diameter
• Finish: Electro-zinc
plated (EG)
ROL11000EG
14 mm
Width 41 mm, Thickness 6 mm, Standard Finish: EG
162
www.erico.com
11/15/07
2:09 PM
Page 163
19
Page 165
Page 165
Page 166
Page 166
ISN
IHT
VDF
TMN
Page 166
Page 167
Page 167
Page 168
LA
ANG
HSCR
CMP
Page 168
Page 169
Page 169
Page 169
Rod Coupling
D1
D2
D3
Page 170
Page 170
Page 171
Page 171
E2
Rod Connectors
ERIC
Strike Anchor
www.erico.com
163
11/15/07
2:09 PM
Page 164
19
Page 172
Page 173
Page 174
Ferrules
NUT
Threaded Rod
Page 175
Page 175
Page 176
Hex Head Set Screws
Square Washer
Suredrive Anchor
Page 177
Page 177
Page 177
Page 178
Hardware Washers
Hardware Washers
ESGP
MSP
Page 178
Page 179
Page 179
Barrnog/TSGBHD
TSGB
TPC
164
Page 174
Isolation Rubber
Page 176
VMP
www.erico.com
11/15/07
2:09 PM
Page 165
19
ISN
Fast installation nut
• Allows for side mounting on rod
• Time saving
ISNM6
ISNM8
ISNM10
Description
Ø
(mm)
Max. Rec.
Load (N)
187340
187350
187360
M6
M8
M10
750
1000
1000
IHT
Sound reduction lining
• Silicon
• For pipe clamps with steel profile 20 mm to 25 mm
• For temperatures up to 200º C
B
(mm)
578680
578690
20
25
B2
DIN EN
135011:E
www.erico.com
165
+200°
11/15/07
2:09 PM
Page 166
19
VDF
Dual sided screw with collar
• Size M10
MxL
(mm)
583860
M
10 x 45
L
TMN
CADDY® ERISTRUT - Hammer head bolt
• Pre-mounted with nut and large washer
• With stud M8, M10, M12
• Channel nuts are serrated
• Fits onto all CADDY ERISTRUT channels
MxL
(mm)
590080
590090
8 x 30
10 x 40
LA
Drop in anchor
• With internal thread
M
kg/1
M6
M8
M10
M12
M16
M20
0.01
0.01
0.02
0.05
0.06
0.08
M
589890
574410
574420
574430
589895
589900
166
www.erico.com
11/15/07
2:09 PM
Page 167
19
Angle bracket ANG
• Variable sized pre-punched bolt holes
AB77
AB97
AB711
AB1111
A
(mm)
OD1
(mm)
OD2
(mm)
25
25
25
25
7
9
11
11
7
7
7
11
3 mm
20 mm
OD1
37 mm
37 mm
OD2
Hex bolt HSCR
Steel Hex Cap Bolts
• Size Range: M6, M8, & M10 sizes
BOL-M625-HDG
BOL-M820-HDG
BOL-M825-HDG
BOL-M830-HDG
BOL-M840-HDG
BOL-M1020-HDG
BOL-M1030-HDG
BOL-M1040-HDG
Thread
Size
A
(mm)
M6
M8
M8
M8
M8
M10
M10
M10
25
20
25
30
40
20
30
40
www.erico.com
A
M6, M8 or M10 Thread
167
11/15/07
2:09 PM
Page 168
19
CMP
CADDY® mounting plate
• CADDY mounting plate M8 through M12
• Used in conjunction with threaded rod
CMP8
CMP10
CMP12
M
(mm)
Max. Rec.
Load (N)
M8
M10
M12
2500
3000
4000
100 mm
25 mm
M
3 mm
Rod Coupling
Coupling
• Size Range: M8 to M20 rod sizes
RS
COU-M8-ZP
COU-M10-ZP
COU-M12-ZP
COU-M16-ZP
COU-M20-ZP
M8
M10
M12
M16
M20
RS
168
www.erico.com
11/15/07
2:10 PM
Page 169
19
D1
Purlin clip
• for purlins
• M10
336280
32 mm
Ø
97 mm
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N)
D1
≤4
11
600
≤ 22 mm
A
D2
≤ 22 mm
Purlin clip
• for purlins
15º
• M10
339100
A
max. M10
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N)
D2
≤4
11
600
D3
Purlin clip
≤ 22 mm
• for purlins
A
• M10
339110
max. M10
15º
Description
A
(mm)
Ø
(mm)
Max. Rec.
Load (N)
D3
≤4
11
600
www.erico.com
169
max. M10
11/15/07
2:10 PM
Page 170
19
E2 Purlin Clip
E2 for purlin application
• Size Range: M8, M10 and M12 sizes
• No mounting screws required
• Compatible with most purlin profiles
• A load rating is only applicable if the load-bearing capacity of
the supporting element (purlin) is adequate.
E28
E210
E212
H
(mm)
W
(mm)
T
(mm)
M
(mm)
Max. Rec.
Load (N)
52
52
52
25
25
25
3
3
3
M8
M10
M12
600
600
600
W
H
M
T
Rod Connectors
• For connecting threaded rod to pipe hangers
• Size Range: M10 to M12 rod
W
ERC1010
T
HS
ERC1010
ERC02510
WxT
(mm)
HS
(mm)
RS
Height
Adjustment
–
20.3 x 3.9
–
13.6
M10
–
No
–
170
ERC02510
www.erico.com
11/15/07
2:10 PM
Page 171
19
Clevis - ERIC for horizontal extension
Two piece clamp extension
•
•
•
•
Clevis hanger sizes M8 through M16
Fasten from horizontal to vertical hanging configurations
Use in conjunction with all channel profiles
ERIC 8
ERIC 10
ERIC 12
ERIC 16
W
(mm)
T
(mm)
H
(mm)
ODB
(mm)
ODT
(mm)
Max. Rec.
Load (N)
25
25
40
50
3
5
6
6
100
113
118
122.5
10
12
14
18
10
10
14
14
N/A
1350
2650
4400
W
ODT
H
T
ODB
Strike Anchor
• For direct installation of pipe hangers to concrete
• M8 & M10 thread
ESA0850
ESA1050
RS
Thread
Length
Drill Hole
Diameter (mm)
M8
M10
25
25
10
10.5
www.erico.com
171
11/15/07
2:10 PM
Page 172
19
Plywood Timber Ferrules
• Width 40 mm
• Other sizes available upon request
Nominal
Pipe Size
(CU)
FER-015-12-PLY
FER-015-25-PLY
FER-015-38-PLY
FER-015-50-PLY
FER-020-12-PLY
FER-020-25-PLY
FER-020-38-PLY
FER-020-50-PLY
FER-025-12-PLY
FER-025-25-PLY
FER-025-38-PLY
FER-025-50-PLY
FER-032-12-PLY
FER-032-25-PLY
FER-032-38-PLY
FER-032-50-PLY
FER-040-12-PLY
FER-040-25-PLY
FER-040-38-PLY
FER-040-50-PLY
FER-050-12-PLY
FER-050-25-PLY
FER-050-38-PLY
FER-050-50-PLY
FER-065-12-PLY
FER-065-25-PLY
FER-065-38-PLY
FER-065-50-PLY
FER-080-12-PLY
FER-080-25-PLY
FER-080-38-PLY
FER-080-50-PLY
FER-100-25-PLY
FER-100-38-PLY
FER-100-50-PLY
FER-125-25-PLY
FER-125-50-PLY
FER-150-25-PLY
FER-150-38-PLY
FER-150-50-PLY
FER-200-25-PLY
FER-200-38-PLY
FER-200-50-PLY
15
15
15
15
20
20
20
20
25
25
25
25
32
32
32
32
40
40
40
40
50
50
50
50
65
65
65
65
80
80
80
80
100
100
100
125
125
150
150
150
200
200
200
Ferrule Wall
Ferrule Outside
Thickness (mm)
Dia (mm)
12
25
38
50
12
25
38
50
12
25
38
50
12
25
38
50
12
25
38
50
12
25
38
50
12
25
38
50
12
25
38
50
25
38
50
25
50
25
38
50
25
38
50
35
64
89
114
45
70
95
120
51
75
102
127
56
83
102
140
64
89
114
140
76
102
127
152
89
114
140
165
102
127
152
178
152
178
203
178
228
203
228
254
254
280
305
172
www.erico.com
11/15/07
2:10 PM
Page 173
NUT
Steel hex nut
• Size range: M6 to M20
• Finish: Electro-zinc plated (EG), Hot dip galvanised (HDG)
& Stainless steel
HEX-M6-ZP
HEX-M8-ZP
HEX-M10-ZP
HEX-M12-ZP
HEX-M16-ZP
HEX-M20-ZP
HEX-M6-HDG
HEX-M8-HDG
HEX-M10-HDG
HEX-M12-HDG
HEX-M16-HDG
HEX-M20-HDG
HEX-M6-SS
HEX-M8-SS
HEX-M10-SS
HEX-M12-SS
HEX-M16-SS
HEX-M20-SS
Size
Surface
Finish
M6
M8
M10
M12
M16
M20
M6
M8
M10
M12
M16
M20
M6
M8
M10
M12
M16
M20
EG
EG
EG
EG
EG
EG
HDG
HDG
HDG
HDG
HDG
HDG
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
316
316
316
316
316
316
steel
steel
steel
steel
steel
steel
www.erico.com
173
19
11/15/07
2:10 PM
Page 174
19
Threaded Rod
• Attaches hangers to structural attachments
• Low carbon steel, also available in Stainless steel (SS) - see
stainless steel section
• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
ROD-M6X3-HDG
ROD-M6X3-ZP
ROD-M8X3-HDG
ROD-M8X3-ZP
ROD-M10X3-HDG
ROD-M10X3-ZP
ROD-M12X3-HDG
ROD-M12X3-ZP
ROD-M16X3-HDG
ROD-M16X3-ZP
ROD-M20X3-HDG
ROD-M20X3-ZP
RS
L
(mm)
Surface
Finish
M6
M6
M8
M8
M10
M10
M12
M12
M16
M16
M20
M20
3
3
3
3
3
3
3
3
3
3
3
3
HDG
EG
HDG
EG
HDG
EG
HDG
EG
HDG
EG
HDG
EG
RS
L
Isolation Rubber
• For the isolation of dissimilar materials, inhibits
galvanic corrosion
• Dampens sound and vibration
RUB-FLAT
RUB-LIP
For
Isolation of
Type
Pipe Clamps
Strut/Channel
1
2
Type 1
Type 2
174
www.erico.com
11/15/07
2:10 PM
Page 175
19
Hex Head Set Screws
• Size Range: M6, M8 & M10
• Finish: Electro-zinc plated (EG) and 316 Stainless steel (SS)
SET-M625-SS
SET-M820-SS
SET-M825-SS
SET-M830-SS
SET-M840-SS
SET-M1020-SS
SET-M1030-SS
SET-M1040-SS
SET-M625-ZP
SET-M820-ZP
SET-M825-ZP
SET-M830-ZP
SET-M840-ZP
SET-M1020-ZP
SET-M1030-ZP
SET-M1040-ZP
Thread
Size
A
(mm)
Surface
Finish
M6
M8
M8
M8
M8
M10
M10
M10
M6
M8
M8
M8
M8
M10
M10
M10
25
20
25
30
40
20
30
40
25
20
25
30
40
20
30
40
SS
SS
SS
SS
SS
SS
SS
SS
EG
EG
EG
EG
EG
EG
EG
EG
A
Square Washer
• Rod size: M10, M12 and M16
• Washer size: 38 mm x 38 mm x 3 mm
RS
SQ-38M10-ZP
SQ-38M12-ZP
SQ-38M16-ZP
M10
M12
M16
www.erico.com
175
11/15/07
2:10 PM
Page 176
19
Suredrive Anchor
• For the installation of pipe saddles
Dia.
(mm)
SUR-M6
6
L
ØA
Vertical Mounting Plate - VMP
•
•
•
•
CADDY vertical mounting plate M8 through M12
Horizontal pipe support application fastened to building structure
Used in conjunction with threaded rod
VMP8
VMP10
VMP12
RS
(mm)
Max. Rec.
Load (N)
M8
M10
M12
2500
3000
4000
W
H
M
T
176
www.erico.com
11/15/07
2:10 PM
Page 177
19
HARDWARE WASHER
Round Steel Flat Washer
• Size Range: M6 thru M20
WAS-M6-ZP
WAS-M8-ZP
WAS-M10-ZP
WAS-M12-ZP
WAS-M16-ZP
WAS-M20-ZP
ID
(mm)
OD
(mm)
6
8
10
12
16
20
16
19
23
28
33
38
OD
HARDWARE GROMMET ESGP
Easy Snap/Anti Rattle Pipe Grommet
• Size Range: 15 mm thru 25 mm copper tubing
• Yellow plastic pipe grommet provides 360º protection of
plumbing and fire sprinkler plumbing in metal studs
NOTE: Snap one grommet into standard 34.1 mm field punched
hole, or snap two together into any shape factory punched hole;
anti-rattle tabs in ESGP allow grommet to accommodate copper
tubing from 15 mm to 25 mm
Size
(mm)
ESGP
15-25
www.erico.com
177
ID
11/15/07
2:10 PM
Page 178
19
HARDWARE TOOLS MSP
Metal Stud Punch
• Used in the field for punching standard sized 34.1 mm
holes in metal studs
• Cushioned handles mean less operator fatigue and more
comfortable handling
• Tool design with offset handles allows punch to work in
confined locations and near perpendicular walls
• Lightweight punch makes accurate location of holes easier
• Hardened steel components keep tool sharp longer –
less replacement
• Plastic grommets (ESGP) snap easily into 34.1 mm hole
MSP20
Barrnog/TSGBHD adjustable metal nogging
Timber or steel nogging frame construction
• Barrnog adjustable nogging up to 600 mm
• Suitable for timber and steel construction
• Pre-assembled metal nogging, fast, convenient
and strong construction
Barrnog
L
(mm)
W
(mm)
T
(mm)
330-600
92
1
T
W
L
178
www.erico.com
11/15/07
2:10 PM
Page 179
19
TSGB 16 • TSGB 24
Support to enable the fixing of pipes in hollow walls
• The bracket can be extended in length between
280 mm up to 660 mm
• Fix the bracket between 2 vertical stands of the
hollow wall system
• The perforations in the bracket allow quick fixings against the
vertical beams of the walls and allow also the plastic pipe
clamps to be mounted on the horizontal channel
• Use SMS8 self-tapping screw to fix on stud
187190
187191
L
(in)
L
(mm)
11-18
17-26
280-458
432-660
L
TPC 112 • TPC 238
Nylon pipe clamp
•
•
•
•
Nylon pipe clamp to be used together with TSGB bracket
Pipe diameter 9 mm to 61 mm
Use self tapping screws to fix on metal stud
IPC are supplied with self-tapping screw
187192
187193
D
(in)
D
(mm)
3/8 - 1-1/8
5/8 - 2-3/8
9-28
16-61
www.erico.com
D
179
11/15/07
180
2:10 PM
Page 180
www.erico.com
11/15/07
2:11 PM
Page 181
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
Page 183
Page 183
Pages 184
Page 184
CADDY ERISTRUT
CADDY ERISTRUT
UD
UM
®
Page 185-186
CHC
Page 190
®
Page 187
SPC
Page 191
Page 188
Page 189
WB
CADDY MACROFIX NI
®
Page 192
Page 193
H-2
CADDY® MACROFIX
105
406
Page 193
Page 194
Page 194
Page 195
H-CTB-2
M-MSM-2
EM-2
EM-M-2
www.erico.com
181
11/15/07
2:11 PM
Page 182
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
Page 195
Page 195
Pages 196
Page 196
Threaded Rod
Hex Head Set Screws
HSCR
NUT
182
www.erico.com
11/15/07
2:11 PM
Page 183
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
2.5 mm Strut
• 41 mm x 41 mm
• For heavy applications
or tube routes
• Standard lengths: 3 m, 6 m
• Finish: Stainless steel (SS)
Description
310326
L
(M)
Configuration
Finish
6
Slotted
S/S
L
(M)
Configuration
Finish
6
Slotted
S/S
ERISTRUT, AC-2 41 X 41 X 2.5 mm Slotted
See technical section for loading data.
2.5 mm Strut
• 41 mm x 21 mm
• For medium – heavy applications
or tube routes
• Standard lengths: 3 m and 6 m
Description
310265
ERISTRUT, AC-2 41 X 21 X 2.5 mm Slotted
See technical section for loading data.
www.erico.com
183
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
11/15/07
2:11 PM
Page 184
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
UD
CADDY® ERISTRUT channel nut with spring
• M6 - M12
• Suitable for al CADDY ERISTRUT channels
• Finish: 316 Stainless steel (SS)
315180
315190
315120
315200
M
(mm)
H
(mm)
(Nm)
6
8
10
12
5
6
8
8
12
28
55
95
UM
CADDY® ERISTRUT channel nut
• M6 - M12
• Suitable for all CADDY ERISTRUT channels
315140
315150
315160
315170
M
(mm)
H
(mm)
(Nm)
6
8
10
12
5
6
8
8
12
28
55
95
184
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
M
H
M
H
www.erico.com
11/15/07
2:11 PM
Page 185
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
Channel Clip Stainless Steel - CHC for
Copper Pipe and Stainless Steel
Fasten copper and stainless steel pipe services to
strut channel profiles
• Channel clip sizes 20 mm through 200 mm
• Suits all profile strut channels and cantilever brackets
Pipe
Actual Pipe
Size (mm) OD (mm)
CHC-015-CU-SS
CHC-020-CU-SS
CHC-025-CU-SS
CHC-032-CU-SS
CHC-040-CU-SS
CHC-050-CU-SS
CHC-065-CU-SS
CHC-080-CU-SS
CHC-100-CU-SS
CHC-125-CU-SS
CHC-150-CU-SS
CHC-200-CU-SS
15
20
25
32
40
50
65
80
100
125
150
200
13
19
25
32
38
51
64
76
102
127
152
203
WxT
(mm)
32
32
32
32
32
32
32
32
32
32
25
25
www.erico.com
x
x
x
x
x
x
x
x
x
x
x
x
Bolt
1.5
1.5
1.5
2.0
2.0
2.5
2.5
2.5
2.5
2.5
3.0
3.0
185
M6
M6
M6
M6
M6
M8
M8
M8
M10
M10
M10
M10
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
T
W
11/15/07
2:11 PM
Page 186
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
Channel Clip Stainless Steel - CHC for
PVC Pipe
Fasten PVC pipe services to strut channel profiles
• Channel clip sizes 40 mm through 225 mm
• Suits all profile strut channels and cantilever brackets
Pipe
Actual Pipe
Size (mm) OD (mm)
CHC-040-PVC-SS
CHC-050-PVC-SS
CHC-065-PVC-SS
CHC-080-PVC-SS
CHC-090-PVC-SS
CHC-100-PVC-SS
CHC-150-PVC-SS
CHC-225-PVC-SS
40
50
65
80
90
100
150
225
43
55
69
82
90
110
160
251
WxT
(mm)
32
32
32
32
32
32
32
32
x
x
x
x
x
x
x
x
2.0
2.5
2.5
2.5
2.5
2.5
3.0
3.0
186
Bolt
M8
M8
M8
M8
M10
M10
M10
M10
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
T
W
www.erico.com
11/15/07
2:11 PM
Page 187
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
Single Piece Clip Stainless Steel - SPC for
Copper Pipe
Support copper and stainless steel pipe services with
wall bracket, hanging strap or ERIC 1010
•
•
•
•
Single piece clip for sizes 15 mm through 125 mm
One piece clip for fast convenient installation
Interchangeable product
Finish: 316 Stainless steel (SS)
Pipe
Actual Pipe
Size (mm) OD (mm)
SPC-015-CU-SS
SPC-020-CU-SS
SPC-025-CU-SS
SPC-032-CU-SS
SPC-040-CU-SS
SPC-050-CU-SS
SPC-065-CU-SS
SPC-100-CU-SS
SPC-125-CU-SS
15
20
25
32
40
50
65
100
125
13
19
25
32
38
51
64
102
127
WxT
(mm)
25
25
25
25
25
25
25
25
25
www.erico.com
x
x
x
x
x
x
x
x
x
L
(mm)
1.0
1.0
1.2
1.2
1.2
1.4
1.5
1.5
1.7
187
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
S
(mm)
25
25
25
25
25
25
25
25
25
7
7
7
7
7
7
7
7
7
x
x
x
x
x
x
x
x
x
7
7
7
7
7
7
7
7
7
S
S
W
T
L
11/15/07
2:11 PM
Page 188
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
Wall Bracket Stainless Steel - WB
Attach to wall/ceiling with hanging strap, single
piece clip of bracket clip
• Wall bracket for all sizes of HST, SPC & BRC products
WB-SS CUP
WB-SS SET
WxT
(mm)
L
(mm)
A
(mm)
FH
(mm)
25 x 1.5
25 x 1.5
85
85
65
65
6.5
6.5
R
(mm)
Screw
Type
20
20
cup head
set screw
A
W
FH
R
T
188
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
L
www.erico.com
11/15/07
2:11 PM
Page 189
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
CADDY® MACROFIX
2 Screw pipe clamp with boss M8 or M10
• M6 multifunction screw with hexagonal combination head
• Steel profile (B x S)
595400
595410
595420
595430
595440
595450
595470
595475
595480
595490
595500
595505
595510
595520
595530
595535
595540
595550
595555
595560
Ø
(in)
d
(mm)
BxS
(mm)
RS
Max. Rec.
Load (N)
3/8
1/2
3/4
1
1-1/4
1-1/2
2
14-18
20-26
23-30
33-40
41-47
48-54
56-62
62-69
67-71
69-78
85-91
90-98
97-107
104-110
108-116
116-126
129-140
133-141
144-154
159-168
20 x 1.5
20 x 1.5
20 x 1.5
20 x 1.5
20 x 1.5
20 x 1.5
20 x 1.5
20 x 1.5
20 x 1.5
25 x 2.0
25 x 2.0
25 x 2.0
25 x 2.0
25 x2.0
25 x 2.0
25 x 2.5
25 x 2.5
25 x 2.5
25 x 2.5
25 x 2.5
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
1000
1000
1000
1000
1000
1000
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
2200
2200
2200
2200
2-1/2
3
4
5
6
www.erico.com
189
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
d
11/15/07
2:11 PM
Page 190
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
CADDY® MACROFIX
2 Screw pipe clamp with boss M8 or M10
• EPDM rubber insulation for sound reduction compliant with
DIN 4109
• M6 multifunction screw with hexagonal combination head
• Steel profile (B x S)
• Temperature rating from -50ºC up to +110ºC
595595
595600
595610
595620
595630
595640
595650
595660
595670
595675
595680
595690
595695
595700
595710
595720
595730
595740
595750
595755
595760
595770
595775
595780
Ø
(in)
d
(mm)
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
12-15
15-19
20-24
25-30
32-37
40-45
48-53
54-58
59-63
62-64
68-73
75-80
82-86
89-91
95-103
108-116
121-127
129-135
135-141
159-162
165-168
198-202
210-215
216-220
2
2-1/2
3
4
5
6
8
BxS
(mm)
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
RS
Max. Rec.
Load (N)
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
1000
1000
1000
1000
1000
1000
1300
1300
1300
1300
1300
1300
1300
1300
1300
2200
2200
2200
2200
2200
2200
2500
2500
2500
190
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
B2
DIN EN
135011:E
- 50°/+110°
d
www.erico.com
11/15/07
2:11 PM
Page 191
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
SWIVEL LOOP HANGER 105
304 Stainless Steel Band Hanger
• Size Range: 15nb to 200nb
• Recommended for the suspension of stationary stainless
steel pipe lines
NOTE: Stainless steel hex nuts recommended for use with hanger
(not included)
1050050S4
1050075S4
1050100S4
1050125S4
1050150S4
1050200S4
1050250S4
1050300S4
1050400S4
1050500S4
1050600S4
1050800S4
Nominal Steel
Pipe Size (nb)
Pipe OD
(mm)
A
(mm)
B
(mm)
15
20
25
32
40
50
65
80
100
125
150
200
21
27
34
43
48
60
76
89
114
140
165
219
12
12
12
12
12
12
14
14
17
17
17
21
56
78
84
92
102
111
124
138
152
165
219
270
www.erico.com
191
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
Max. Rec.
Load (N)
2715
2715
2715
2715
2715
2715
4320
4320
5565
5565
7120
8010
A
B
11/15/07
2:11 PM
Page 192
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
CLEVIS HANGER 406
Standard Duty 304 Stainless Steel
• Recommended for the suspension of stationary non-insulated
stainless steel pipe lines
4060050S4
4060075S4
4060100S4
4060125S4
4060150S4
4060200S4
4060250S4
4060300S4
4060400S4
4060500S4
4060600S4
4060800S4
4061000S4
4061200S4
4061600S4
4061800S4
4062000S4
4062400S4
Nominal Pipe
Size (nb)
Pipe OD
(mm)
RS
A
(mm)
15nb
20nb
25nb
32nb
40nb
50nb
65nb
80nb
100nb
125nb
150nb
200nb
250nb
300nb
400nb
450nb
500nb
600nb
21
27
34
43
48
60
76
89
114
140
165
219
273
324
406
457
508
610
M10
M10
M10
M10
M10
M10
M12
M12
M16
M16
M20
M20
M20
M20
M24
M28
M32
M32
54
60
70
84
100
114
133
152
197
248
298
356
419
473
610
679
762
867
192
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
B
(mm)
Max. Rec.
Load (lbs.)
41
44
52
60
75
83
95
105
137
173
210
241
276
305
400
445
498
552
2715
2715
2715
2715
2715
2715
5025
5025
6365
8630
8900
16020
16900
18680
20460
21350
21350
21350
RS
B
A
www.erico.com
11/15/07
2:11 PM
Page 193
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
H-2
Stainless steel hammer on beam clamp
• Material: Stainless steel AISI 304, V2A
179610
179620
179630
Description
A
(mm)
Max. Rec.
Load (N)
4H24-2
4H58-2
4H912-2
3-8
8 - 14
14 - 20
650
650
650
A
H-CTB-2
Stainless steel hammer-on beam clamp
with strap
• Comes equipped with cable tie to support pipe tubing
Description
A
(mm)
B
(mm)
170280 4H24CTBR-2
3-8
25 - 51
170300 4H58CTBR-2 8- 14 25 - 51
170310 4H912CTBR-2 14 - 20 25 - 51
Max. Rec.
Load (N) B
300
300
300
www.erico.com
193
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
Ø 6.8 mm
A
B
11/15/07
2:11 PM
Page 194
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
M-MSM-2
Stainless steel hammer-on finger close
pipe clamp
• With pipe clamp with closing mechanism
179650
179660
179670
179690
179700
179710
Description
A
(mm)
8M24SM-2
8M58SM-2
8M912SM-2
12M24SM-2
12M58SM-2
12M912SM-2
3-8
8 - 14
14 - 20
3-8
8 - 14
14 - 20
B
(mm)
18
18
18
22
22
22
-
Max. Rec.
Load (N) B
22
22
22
30
30
30
90
90
90
90
90
90
EM-2
Stainless steel hammer-on clip
• Horizontal and vertical inside thread M6
179720
179730
179740
Description
A
(mm)
Max. Rec.
Load (N)
EM24-2
EM58-2
EM912-2
3-8
8 - 14
14 - 20
200
200
200
194
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
A
Ø
M6
9 x 2 mm
M6
www.erico.com
11/15/07
2:11 PM
Page 195
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
EM-M-2
Stainless steel hammer-on finger close
pipe clamp
• With pipe clamp with closing mechanism
A
Description
179780
179790
179800
179810
179820
179830
A
(mm)
Ø
(mm)
8EM24-2
3 - 8 18
8EM58-2
8 - 14 18
8EM912-2 14 - 20 18
12EM24-2
3 - 8 22
12EM58-2
8 - 14 22
12EM912-2 14 - 20 22
-
22
22
22
30
30
30
Max. Rec.
Load (N)
200
200
200
200
200
200
Ø
Threaded Rod
• Attaches hangers to structural attachments
RS
ROD-M6X3-SS
ROD-M8X3-SS
ROD-M10X3-SS
ROD-M12X3-SS
ROD-M16X3-SS
ROD-M20X3-SS
RS
L
(mm)
M6
M8
M10
M12
M16
M20
3
3
3
3
3
3
L
Hex Head Set Screws
• Size Range: M6, M8 & M10
SET-M625-SS
SET-M820-SS
SET-M825-SS
SET-M830-SS
SET-M840-SS
SET-M1020-SS
SET-M1030-SS
SET-M1040-SS
Thread
Size
A
(mm)
Surface
Finish
M6
M8
M8
M8
M8
M10
M10
M10
25
20
25
30
40
20
30
40
SS
SS
SS
SS
SS
SS
SS
SS
www.erico.com
195
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
A
11/15/07
2:11 PM
Page 196
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
S TA I N L E S S
Hex bolt HSCR
Steel Hex Cap Bolts
• Size Range: M6, M8, & M10 sizes
BOL-M625-SS
BOL-M820-SS
BOL-M825-SS
BOL-M830-SS
BOL-M840-SS
BOL-M1020-SS
BOL-M1030-SS
BOL-M1040-SS
Thread
Size
A
(mm)
M6
M8
M8
M8
M8
M10
M10
M10
25
20
25
30
40
20
30
40
A
NUT
Steel hex nut
Size
HEX-M6-SS
HEX-M8-SS
HEX-M10-SS
HEX-M12-SS
HEX-M16-SS
HEX-M20-SS
M6
M8
M10
M12
M16
M20
Surface
Finish
316
316
316
316
316
316
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
steel
steel
steel
steel
steel
steel
196
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
20
www.erico.com
11/15/07
2:12 PM
Page 197
21
GUIDES & ROLLERS
Page 198
Page 198
Page 200
Page 201
ROL12
ROL13
ROL14
ROL15
Page 202
Page 203
Page 204
Page 205
610
615
PESMO
PESHO
Page 206
Page 207
Page 208
Page 209
PESMOS
PESHOS
PESMT
PESHT
Page 210
Page 211
PESMTS
PESHTS
www.erico.com
197
11/15/07
GUIDES & ROLLERS
2:12 PM
Page 198
21
Strut Pipe Roller ROL12
• Size Range: 25nb to 100nb pipe
• Pipe rollers mount to strut for applications where
there is longitudinal pipe movement
• Hole Sizes: 14 mm, Spacing 17 mm from edge and
48 mm on center
• Width: 41 mm
• Thickness: 6 mm
B
ROL12000EG
A
See chart on page 199
• Pipe rollers mount to strut for applications
where there is longitudinal pipe movement
48 mm on center
• Width: 41 mm
• Thickness: 6 mm
Pipe
Size
ROL13034EG
ROL13046EG
ROL13068EG
100nb
150nb
200nb
B
A
See chart on page 199
198
www.erico.com
11/15/07
2:12 PM
Page 199
21
GUIDES & ROLLERS
ROL12 & ROL13 Sizing Chart
Pipe
Size
20
25
32
40
50
65
80
100
125
150
200
Saddle
Number
None
630
631
632
None
630
631
632
None
630
631
632
633
None
630
631
632
633
None
630
631
632
633
634
None
630
631
632
633
634
None
630
631
632
633
634
None
630
631
632
633
634
635
None
630
631
632
633
634
635
None
630
631
632
633
634
635
None
631
632
633
634
635
Actual
Covering
Thickness
0
22
37
48
0
18
40
54
0
22
41
49
62
0
25
38
59
71
0
27
40
54
67
79
0
27
37
59
73
86
0
25
40
52
65
78
0
27
40
52
65
78
103
0
25
38
51
65
78
106
0
25
38
51
64
76
105
0
38
51
68
79
105
www.erico.com
Actual
O.D.
Actual
Radius
A
B
17
83
111
129
24
92
117
146
43
98
130
152
175
48
108
133
175
197
60
121
146
181
206
232
73
137
156
200
229
254
89
149
178
203
229
254
114
181
206
232
254
286
330
143
210
238
264
286
314
362
168
229
257
279
314
343
384
219
305
330
368
391
441
13
41
56
64
17
46
59
73
21
49
65
76
87
24
54
67
87
98
30
60
73
90
103
116
37
68
78
100
114
127
44
75
89
102
114
127
57
90
103
116
127
143
165
71
105
119
132
143
157
181
84
114
129
140
157
171
192
110
152
165
184
195
221
165
165
210
210
165
184
210
210
165
184
210
210
235
165
210
210
235
235
165
210
210
235
257
257
165
210
235
235
235
235
184
210
235
257
257
276
210
235
257
257
257
276
276
210
257
257
276
276
276
276
235
257
276
276
276
276
276
257
276
276
276
276
276
75
105
113
122
79
108
116
130
84
110
122
133
143
86
111
124
141
152
94
117
130
144
154
168
100
125
133
156
171
184
105
133
143
154
168
178
114
144
154
168
179
194
217
129
156
170
178
194
206
233
138
167
178
191
208
219
246
162
203
217
237
249
276
199
11/15/07
2:12 PM
Page 200
GUIDES & ROLLERS
21
48 mm on center
• Width: 41 mm
• Thickness: 6 mm
B
ROL14000EG
A
ROL14 Sizing Chart
Pipe
Size
150
200
250
300
350
400
Saddle
Number
Actual
Covering
Thickness
Actual
O.D.
Actual
Radius
A
B
None
630
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
0
25
38
51
64
76
105
0
38
51
68
79
105
0
38
52
65
78
103
0
40
52
67
78
105
0
38
51
64
76
102
0
38
51
64
76
102
168
229
254
279
305
330
387
219
305
330
365
387
438
273
362
387
413
438
489
324
410
438
464
489
543
356
445
467
492
518
568
406
498
518
549
562
619
84
105
127
140
152
165
194
110
152
165
183
194
219
137
181
194
206
219
248
162
205
219
232
244
271
178
222
233
246
259
284
203
249
259
275
281
310
243
259
270
279
289
298
318
260
289
298
310
318
337
279
308
318
325
333
352
297
327
337
344
352
371
306
335
344
352
362
378
324
352
376
368
378
394
175
200
213
225
238
251
278
198
238
251
265
278
302
224
265
278
289
302
325
248
289
302
313
325
349
262
302
313
325
337
362
287
325
337
349
362
384
200
www.erico.com
11/15/07
2:12 PM
Page 201
21
GUIDES & ROLLERS
48 mm on center
• Width: 41 mm
• Thickness: 6 mm
B
ROL15000EG
A
ROL15 Sizing Chart
Pipe
Size
450
500
600
750
Saddle
Number
Actual
Covering
Thickness
Actual
O.D.
Actual
Radius
A
B
None
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
special order
0
38
51
64
76
102
0
38
51
64
76
102
0
38
51
64
76
102
0
457
543
568
594
619
670
508
594
619
645
670
721
610
699
724
749
775
826
762
229
271
284
297
310
335
254
297
310
322
335
360
305
349
362
375
387
413
381
394
411
416
421
425
437
406
421
429
430
437
445
427
445
445
449
454
460
452
302
341
354
367
379
405
310
367
378
392
403
430
376
416
429
441
454
479
452
www.erico.com
201
11/15/07
2:12 PM
Page 202
GUIDES & ROLLERS
21
PIPE ROLLER 610
One Rod Roller Hanger
• Suspends pipe from a single hanger rod where longitudinal
movement may occur in the pipe due to expansion
or contraction
• Finish: Black
NOTE: Yoke and axle are carbon steel and roll is cast iron,
available with Electro-zinc plated (EG) finish by special order
RS
6100250PL
6100300PL
6100400PL
6100500PL
6100600PL
6100800PL
6101000PL
6101200PL
6101400PL
6101600PL
6101800PL
6102000PL
6102400PL
Nominal Steel
Pipe Size (nb)
RS
A
(mm)
Max. Rec.
Load (N)
65
80
100
125
150
200
250
300
350
400
450
500
600
M12
M12
M16
M16
M20
M20
M20
M20
M24
M24
M24
M32
M32
162
178
214
259
291
351
416
479
530
570
654
686
824
100
1380
2115
3050
3470
3470
4290
5340
5340
5340
6230
7115
7115
202
A
www.erico.com
11/15/07
2:12 PM
Page 203
21
GUIDES & ROLLERS
PIPE ROLLER 615
Pipe Roller Support
• Supports pipe from a sub-structure or structural member
where longitudinal movement may occur due to expansion
or contraction
• Finish: Black
NOTE: Chair and axle are carbon steel and roll is cast iron,
available with Electro-zinc plated (EG) finish by special order
6150250PL
6150300PL
6150400PL
6150500PL
6150600PL
6150800PL
6151000PL
6151200PL
6151400PL
6151600PL
6151800PL
6152000PL
6152400PL
Nominal Steel
Pipe Size (nb)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
Bolt Size
Max. Rec.
Load (N)
65
80
100
125
150
200
250
300
350
400
450
500
600
89
102
132
152
172
210
252
295
330
370
405
435
522
32
51
51
76
79
86
133
140
146
203
241
254
305
102
116
124
176
203
254
318
356
403
454
508
559
664
48
57
73
77
102
132
160
191
213
240
265
292
354
3/8” x 1-1/4”
3/8” x 1-1/4”
1/2” x 1-1/2”
1/2” x 1-1/2”
1/2” x 1-1/2”
5/8” x 1-3/4”
5/8” x 1-3/4”
5/8” x 1-3/4”
5/8” x 1-3/4”
5/8” x 2”
5/8” x 2”
3/4” x 2-1/4”
3/4” x 2-1/4”
2670
2670
3115
3115
4450
5785
5785
10230
13345
17795
17795
17795
17795
D
A
B
E
C
www.erico.com
203
11/15/07
2:12 PM
Page 204
GUIDES & ROLLERS
21
One Rod Pipe Expansion Slides PESMO
• Medium duty
• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur due
to expansion or contraction
• One connector nut, medium duty
580560
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESMO
120º C
M10/M12
80
Fmax
H
L
W
Fmax (N)
(mm) (mm) (mm) Ceiling
Floor
Mount Mount
42
122
67
2300
ΔL
+120° C
2300
RS
H
W
L
Floor Mounted
10.5 x 22
12.5
Fmax
Ceiling Mounted
204
www.erico.com
11/15/07
2:12 PM
Page 205
21
GUIDES & ROLLERS
One Rod Pipe Expansion Slides PESHO
• Heavy duty
• One connector nut, heavy duty
580564
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESHO
240°C
M12/M16
120
H
L
W
Fmax (N)
Floor
Mount
Mount
51
Fmax
150
100
5000
9000
RS
ΔL
H
W
L
Floor Mounted
10.5 x 22
12.5
Fmax
Ceiling Mounted
www.erico.com
205
+120° C
11/15/07
2:12 PM
Page 206
GUIDES & ROLLERS
21
One Rod Pipe Expansion Slides PESMOS
• Medium duty
• One connector nut with flange for attachment to strut
channels, medium duty
580561
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESMOS
120º C
M10/M12
80
H
L
W
Fmax (N)
Floor
Mount
Mount
46
Fmax
122
150
2300
+120° C
2300
ΔL
RS
12.5 x 20.0
100
H
W
40
Floor Mounted
L
Fmax
Ceiling Mounted
206
www.erico.com
11/15/07
2:12 PM
Page 207
21
GUIDES & ROLLERS
One Rod Pipe Expansion Slides PESHOS
• Heavy duty
• One connector nut with flange for attachment to strut
channels, heavy duty
580565
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESHOS
240º C
M12/M16
120
H
L
W
Fmax (N)
Floor
Mount Mount
57
150
188
5000
9000
ΔL
Fmax
RS
13 x 25
H
160
W
40
L
Floor Mounted
Fmax
Ceiling Mounted
www.erico.com
207
+120° C
11/15/07
2:12 PM
Page 208
GUIDES & ROLLERS
21
Two Rod Pipe Expansion Slides PESMT
• Medium duty
• Two connector nuts, medium duty
580562
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESMT
120º C
M10/M12
140
Fmax
H
L
W
Fmax (N)
Floor
Mount
Mount
42
165
67
2300
+120° C
2300
RS
ΔL
H
W
123
L
Floor Mounted
10.5 x 22
12.5
Fmax
Ceiling Mounted
208
www.erico.com
11/15/07
2:12 PM
Page 209
21
GUIDES & ROLLERS
Two Rod Pipe Expansion Slides PESHT
• Heavy duty
• Two connector nuts, heavy duty
580566
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESHT
240º C
M12/M16
245
Fmax
H
L
W
Fmax (N)
Floor
Mount
Mount
51
275
RS
100
5000
+120° C
9000
RS
H
ΔL
W
13 x 25
Floor Mounted
210
L
Fmax
Ceiling Mounted
www.erico.com
209
13
11/15/07
2:12 PM
Page 210
GUIDES & ROLLERS
21
Two Rod Pipe Expansion Slides PESMTS
• Medium duty
• Two connector nuts with flange for attachment to strut
channels, medium duty
580563
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESMTS
120º C
M10/M12
140
H
L
W
Fmax (N)
Floor
Mount
Mount
46
165
150
2300
+120° C
2300
ΔL
Fmax
RS
12.5 x 20.0
H
100
W
40
123
L
Floor Mounted
Fmax
Ceiling Mounted
210
www.erico.com
11/15/07
2:12 PM
Page 211
21
GUIDES & ROLLERS
Two Rod Pipe Expansion Slides PESHTS
• Heavy duty
• Two connector nuts with flange for attachment to strut
channels, heavy duty
580567
Description
Max.
Temp
(deg C)
RS
ΔL
(travel,
mm)
PESHTS
240º C
M12/M16
245
H
L
W
Fmax (N)
Floor
Mount
Mount
57
275
RS
Fmax
188
5000
9000
RS
ΔL
13 x 25
W
160
Floor Mounted
210
L
Fmax
Ceiling Mounted
www.erico.com
H
211
+240° C
11/15/07
212
2:12 PM
Page 212
www.erico.com
11/15/07
2:33 PM
Page 213
22
Page 214
Page 215
Page 215
Page 215
TP220
TP225
TP225G
TP225A
Page 216
Page 216
Page 217
Page 217
TP230
TP230G
TP235
TP240
Page 218
Page 219
Page 220
TP280
SB55
CADDY® EZ BRACE
www.erico.com
213
11/15/07
2:33 PM
Page 214
22
SWAY BRACING TP220
Quick Clamp Sway Brace Pipe Attachment
•
•
•
•
•
Size Range: 1-1/4” thru 8” braced pipe
Used for laterally bracing pipe against sway disturbances
Complies with NFPA® 13
Snap off nut design at recommended torque
Finish: Electro-zinc galvanized (EG)
NOTE: Also available in Plain (PL) finish
TP2201000125EG
TP2201000150EG
TP2201000200EG
TP2201000250EG
TP2201000300EG
TP2201000400EG
TP2201000500EG
TP2201000600EG
TP2201000800EG
TP2201250125EG
TP2201250150EG
TP2201250200EG
TP2201250250EG
TP2201250300EG
TP2201250400EG
TP2201250500EG
TP2201250600EG*
TP2201250800EG*
A (Service
Pipe Size) (in)
B (Brace
Pipe Size) (in)
C
(in)
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
4-13/16
5-1/8
5-5/16
6-1/2
7-1/4
8-1/8
8-5/8
10
11-3/4
5-1/4
5-1/2
6
6-1/2
7-1/4
8-5/16
9-1/4
10-1/2
12
Brace Pipe
*Not Listed
A
C
B
Service Pipe
214
www.erico.com
11/15/07
2:33 PM
Page 215
22
SWAY BRACING TP225 & TP225G
Quick End Threadless Brace Fitting
• Size Range: 1” and 1-1/4” bracing pipe
• Used to install lateral and/or
longitudinal sway bracing
• Complies with NFPA® 13
TP225G100EG*
TP225G125EG*
TP225100EG
TP225125EG
TP225
Fig.
No.
A (Brace
Pipe Size) (in)
B
(in)
C
(in)
D
(in)
1
1
2
2
1
1-1/4
1
1-1/4
1-3/8
1-5/8
1-3/8
1-5/8
1-1/4
1-1/4
1-3/8
1-3/8
1-1/4
1-1/4
1-1/8
1-1/8
TP225G
*Heavy Duty Assembly
C
D
B
B
C
A
9/16" DIA.
TP225
Fig. 2
D
17/32”
Fig. 1
Fig. 1
A
TP225G
C
B
A
Fig. 2
SWAY BRACING ADAPTER PLATE TP225A
Quick Loader Adapter Plate
• Allows TP225 to be attached with two or three
attachment bolts
1 1/2"
1 1/2"
TP225A000EG
www.erico.com
4 3/4"
215
11/15/07
2:33 PM
Page 216
22
SWAY BRACING TP230 & TP230G
Quick In-line Lateral & Longitudinal Sway Brace Clamp
•
•
•
•
Size Range: 1” thru 8” braced pipe
Used for laterally and longitudinally bracing piping against sway
TP230
Fig.
A (Service
B (Brace
No. Pipe Size) (in) Pipe Size) (in)
TP2301000100EG
TP2301000125EG
TP2301000150EG
TP2301000200EG
TP2301000250EG
TP2301000300EG
TP2301250125EG
TP2301250150EG
TP2301250200EG
TP2301250250EG
TP2301250300EG
TP230G1000400EG*
TP230G1000500EG*
TP230G1000600EG*
TP230G1000800EG*
TP230G1250400EG*
TP230G1250500EG*
TP230G1250600EG*
TP230G1250800EG*
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
1
1-1/4
1-1/2
2
2-1/2
3
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
4
5
6
8
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
C
(in)
D
(in)
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
3/16
3/16
3/16
1/4
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
2
2
2
TP230G
*Heavy Duty Assembly
Brace Pipe
Fig. 2
Fig. 1
B
A
C
D
216
www.erico.com
11/15/07
2:33 PM
Page 217
SWAY BRACING TP235
Quick Tab Welded Longitudinal Sway Brace Fitting
• Used for longitudinally bracing piping against
sway when welding is an option
B
A (Brace
Pipe Size) (in)
B
(in)
C
(in)
1
1-1/4
3/16
3/16
1
1
TP235100EG
TP235125EG
A
C
SWAY BRACING TP240
Quick 4-way Longitudinal Sway Brace Clamp
• Used for longitudinally bracing lateral sway bracing
against sway disturbance
• Also used for riser bracing
A (Brace
Pipe Size) (in)
A x A1
TP2401000100EG
TP2401250125EG
1x1
1-1/4 x 1-1/4
B
(in)
B1
(in)
1-3/8
1-3/8
1-3/8
1-5/8
A
B
B1
A1
www.erico.com
217
22
11/15/07
2:34 PM
Page 218
22
SWAY BRACING TP280
Threaded Sway Brace Fitting
• Size Range: 1” pipe
• Used with Models: #400, #450, #610, and any length of 1”
pipe to restrain pipe from swaying during an earthquake
NOTE: Plain (PL) finish available by special order
Pipe Size
(in)
TP2800100EG
TP280P0100EG
1
1
Style
AB
A
Welded
Structural
Attachment
320W0050PL
Style AB
Style A
UL® LISTING & TESTED WORKING LOAD CHART FOR ERICO® SWAY BRACES*
Pipe
Size
(in)
2
2-1/2
3
3-1/2
4
5
6
8
Working
Model
Model
Load Per
TP220**
TP225
U.L. 203A
380
LISTED
LISTED
395
LISTED
LISTED
435
LISTED
LISTED
540
LISTED
LISTED
655
LISTED**
LISTED
935
LISTED
LISTED
1265
NOT LISTED NOT LISTED
2015
NOT LISTED NOT LISTED
Model
TP225G
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
Model
TP230
Model
TP230G
LISTED
NOT LISTED
LISTED
NOT LISTED
LISTED
NOT LISTED
NOT LISTED
LISTED
NOT LISTED
LISTED
NOT LISTED
LISTED
NOT LISTED
LISTED
NOT LISTED
LISTED
Model
TP235
Model
TP240
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
NOT LISTED
NOT LISTED
*See website for latest updates at www.erico.com
** TP220 list only through 4” pipe for schedule 10 pipe
1. ERICO Sway Braces are UL® tested and Listed for use with ASTM® schedule 10 and 40 brace pipe
2. ERICO Sway Braces meet the full UL rated load when used with 1” or 1-1/4” schedule 40 brace pipe
3. ERICO Sway Braces meet the UL requirement that lateral braces must support a load equal to 1-1/2
times the working load without slippage. Actual working load capacity can be more than UL203A above. See
our rated loads on the UL website.
218
www.erico.com
11/15/07
2:34 PM
Page 219
22
SWAY BRACING SB55
SB55N Easy Attach Sway Brace
•
•
•
•
•
Lateral and longitudinal sway bracing attachments
cULus Listed
Set screw torque in the brace attachment is 160 in-lbs
Structural attachment bracket (L100000EG) included with
SB55N, additional L100000EG attachments can be ordered
separately for added attachment strength
• For use with ERIC16
• Finish: Electro-zinc plated (EG) and Plain (PL) finish
Brace
Pipe
Size
(in)
Description
SB55N1000037EG
SB55N1000037PL
SB55N1000050EG
SB55N1000050PL
SB55N1000062EG
SB55N1000062PL
SB55N1250037EG
SB55N1250037PL
SB55N1250050EG
SB55N1250050PL
SB55N1250062EG
SB55N1250062PL
Sway brace clamp, 3/8 x 1
Sway brace clamp, 3/8 x 1.25
Attachment
Hole Size
SB50N038EG
SB50N050EG
SB50N062EG
SB50N038PL
SB50N050PL
SB50N062PL
3/8
1/2
5/8
3/8
1/2
5/8
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
Sprinkler Working Max. Rec.
AttachFinish Pipe Size to Load Torque Value ment
be Braced
(lbs)
for Bolts
Hole
(in)
(ft lbs)
Size (in)
EG
Plain
EG
Plain
EG
Plain
EG
Plain
EG
Plain
EG
Plain
400
400
600
600
700
700
400
400
600
600
700
700
20
20
50
50
90
90
20
20
50
50
90
90
3/8
3/8
1/2
1/2
5/8
5/8
3/8
3/8
1/2
1/2
5/8
5/8
Additional SB50N
if needed
SB50N
Finish
Attachment
Hole Size
EG
EG
EG
Plain
Plain
Plain
www.erico.com
1 - 2-1/2
1 - 2-1/2
1 - 3-1/2
1 - 3-1/2
1-4
1-4
1 - 2-1/2
1 - 2-1/2
1 - 3-1/2
1 - 3-1/2
1-4
1-4
SB55N
Brace
Pipe
219
11/15/07
2:34 PM
Page 220
22
CADDY® EZ BRACE
•
•
•
•
•
The fast easy to install CADDY EZ BRACE seismic sway brace
No disassembly of hardware, it stays in place
Patent pending design
Call for availability
Finish: Electrogalvanised, Hot dip galvanised (HDG) and Plain (PL)
CSBEZ1000100EG
CSBEZ1000125EG
CSBEZ1000150EG
CSBEZ1000200EG
CSBEZ1000250EG
CSBEZ1000300EG
CSBEZ1000400EG
CSBEZ1000500EG
CSBEZ1000600EG
CSBEZ1000800EG
CSBEZ1250100EG
CSBEZ1250125EG
CSBEZ1250150EG
CSBEZ1250200EG
CSBEZ1250250EG
CSBEZ1250300EG
CSBEZ1250400EG
CSBEZ1250500EG
CSBEZ1250600EG
CSBEZ1250800EG
Brace
Pipe Size (in)
Service
Pipe Size(in)
1
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
220
Pictured with our SB55N product for structural
attachment.
www.erico.com
11/15/07
2:13 PM
Page 221
TECHNICAL SECTION
Quality Assurance ISO 9001:2000, Technical Tests . . . . . . . . . . . . . . . . . . . . . Page 218
Fire Rating Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 219
Corrosion Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 221
Load Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 222
CADDY® Products
a. Spring Steel Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223
b. CADDY “Bolt on” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223
Fixing of Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223
Pipe Sizing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 224
Channels and Cantilever Arms Load Values
a. C-channels load values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 225
b. C-cantilever arms load values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 225
c. CADDY® ERISTRUT channels load values . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 226
d. CADDY ERISTRUT cantilever arms load values . . . . . . . . . . . . . . . . . . . . . . . Page 228
N
E
W
S
www.erico.com
221
11/15/07
2:13 PM
Page 222
TECHNICAL SECTION
Quality Assurance
Test and Control Procedure
ERICO systematically conducts tests on finished products
according to the procedures of the ERICO quality
assurance manual.
The test methodology is confirmed by independent
laboratory tests, who have issued certificates according
to DIN 18168 for the tested CADDY products (Ref. see
below).
Quality Assurance ISO 9001:2000
Quality Control includes material and product
performace testing - Heat treatment and coating/
painting ("corrosion protection") are part of our process.
We complete performance testing to validate the parts
have been hardened properly and meet tensile load
testing. We also complete performance testing to
validate the coating is adequate.
Research and Development
ERICO’S RESEARCH AND DEVELOPMENT DEPARTMENT
IS CONSTANTLY RESEARCHING, DESIGNING AND
DEVELOPING NEW FIXINGS AND FASTENERS, AND AT
THE SAME TIME IMPROVING THE CURRENT RANGE OF
CADDY PRODUCTS.
N
E
W
S
222
www.erico.com
11/15/07
2:13 PM
Page 223
TECHNICAL SECTION
The fire-test
Per ERICO’s request, the MPA, Braunschweig, Germany, conducted several tests on CADDY® Fasteners, which were installed within
cable tray systems and other applications. These tests were conducted within a calibrated fire-chamber to obtain appropriate FireRating Classification approvals.
The fire chamber tests were conducted in
accordance to DIN4102-12. The temperature
increase is according to the graph curve as
detailed. The Fire Rating is achieved providing
that the installation does not collapse or there
is no “short circuit” within the system.
Temp. Increase (K)
ETK-curve
E30: 30 minutes without deviation.
Time (MN)
Temperature-curve
The tests were conducted in association with a Swiss
manufacturer of cables and a German manufacturer
of cable trays.
Installation within fire chamber.
Chains applied as
weight simulation
All systems and products were
subjected to two fire tests. The
weight of several cables within
the cable trays is simulated by
steel chains.
Total loads of the two systems are:
• 100 N/m
• 200 N/m
N
E
W
S
www.erico.com
223
11/15/07
2:13 PM
Page 224
TECHNICAL SECTION
Fire Rating Classification
FIRE
The tests were successfully
concluded within the
specified norms.
The systems after the fire-test
ABP certificate
Nr. P-3414/1904-MPA BS
(according to German standards)
RIGD
CADDY® ERISTRUT
STRUT+TFZ+ISSP
ISN+TFZ+C-EC
CADDY® SLICK
STRUT NUT
C-EC+RIGD+
CADDY SLICK+PLN
ISSP
E90 Certification for:
N
E
W
S
• Strut channels and cantilever arms 41x41x2.5 mm
• CADDY® SLICK Strut Nut
• ISN-nut
• ISSP-plate
• PLN-plate
• C-EC Clamp
• RIGD
• Several products used in
combination within these
systems
F30 Certification for:
• CADDY® SPEED LINK
• CADDY® SPEED LINK LD
Meets the fire rating requirements
of DIN 4102-2 for 30 minutes at
30 percent of rated load
224
www.erico.com
11/15/07
2:13 PM
Page 225
TECHNICAL SECTION
Corrosion Protection
PL - Plain or Black
Plain without coating or Black
CADDY® COAT
CADDY® COAT is a patented multi-layer system
consisting of a zinc phosphate coating for optimum
adhesion and creep resistance covered by a nominal
20 microns of a lead-free cathodic electrocoat finish
for exceptional corrosion resistance.
PPC - Polyester powder coating
Polyester thermoset powder coating with a minimum
coating thickness of 60 micron color brown for copper
pipe and white for PVC pipe clips.
CP - Copper-colored coating
Copper electroplated (no corrosion protection; for
identification purposes only).
(Alternative finish is CADDY COAT)
SS - Stainless Steel
Stainless steel hammer-on fasteners are made of
austenitic stainless steel type X12. Cr Ni 17-7 (AISI 302,
Standard no. 1.4310, according to DIN 17224).
CADDY components C20, C30, C45, 5000, 6000 and all
CR clamps are made of austenitic stainless steel type X5
Cr Ni 18-10 (AISI 304, standard n° 1.4301).
ERICO CADDY profiles, the associated fixing component
and the strut nuts are normally made of standard
n° 1.4571. All stainless steel finish CADDY® MACROFIX,
CHC (channel clip) and SPC (single piece clips) are
manufactured from AISI 316 or 316L stainless steel.
EG - Electro-zinc plated
The anti-corrosion protection consists of an
electrolytically applied zinc coating with a layer
thickness of 8-15 micron or an equivalent treatment.
This protection will withstand 90 hours saltspray test to
SS-DIN 50021, ISO/R 1456-1970, ASTM B 117-90.
HDG - Hot Dip Galvanised
Protection against corrosion is provided by hot dip
galvanising in accordance with DIN 50976+Zn-D,
NFA 91-121; NEN 1275.
The zinc layer thickness is 50-70 micron (350-500 g/m2).
The finish can be used for indoor and outside
applications and is suitable for use in humid and mildly
corrosive environments.
ERICO-fixing products made of stainless steel are
intended for indoor and outdoor use in non-corrosive
environments or where only mildly corrosive conditions
apply.
NOTE:
Because stainless steel is susceptible to stress corrosion
in chloride environments it is forbidden to use these
ERICO-fixing products in chloride environments
(indoor swimming pools, etc.).
When selecting ERICO stainless steel products for a
corrosive environment, it is always best to consult with
a corrosion engineer and, if possible, conduct tests in
the environment involved under actual operating
conditions or ask ERICO for engineering approval and
load rating.
PG - Pre-galvanised
Continuous mill annealed and galvanised. Cut edges
and welded areas are not galvanised. Zinc near the
uncoated metal becomes a sacrificial anode which
protects the bare areas after exposure.
(ANSI/ASTM A525 and 526)
N
E
W
S
www.erico.com
225
11/15/07
2:13 PM
Page 226
TECHNICAL SECTION
Load Rating
Maximum Recommended Load
in NEWTONS
Load ratings are only valid within +5 to + 35°C unless
otherwise specified in this catalogue.
All loads should be applied VERTICALLY to the normal
fixing product installation except as may be indicated
otherwise in diagrams. If no direction is indicated or a
zero load rating is given, the product is to be used for
positioning purposes only.
A load rating in this catalogue is only applicable if the
load-bearing capacity of the supporting element (purlin,
angle beam, flange, bar, etc.) is adequate.
Any repositioning, deformation, or cracking of the
supporting element should be a warning that the load
bearing capacity of the element is exceeded.
In such situations, take preventive measures: consult
a structural engineer, or consult ERICO® for advice.
Recommended working loads are static load
limit values.
NOTE:
ERICO will be pleased to advise on special applications
or loading situations.
1kg = 9.806N
N
E
W
S
226
www.erico.com
11/15/07
2:14 PM
Page 227
TECHNICAL SECTION
CADDY® Spring Steel Clips
CADDY® “Bolt on”
1a. Description
2a. Description
CADDY® spring steel clips from
ERICO® are manufactured from
heat treated spring steel and, as
a single or combined fixing
system will primarily apply to
steel beam applications.
For the installation of this
type of CADDY® fixing, some
technical details have to be
taken into consideration.
The fixing method relies on the
use of the spring retention force,
loads of up to 90 kg (with a
4:1 safety factor) can be carried
through the clamping force.
In particular the torque
required, as indicated on the
required technical information.
Explanation of the diagram:
-
pre-tension - Fv
clamping force - Fk
max. spring tension - Fmax
clamping range - Fb
usable action of spring - Mn
1b. Installation Advice
The installation of CADDY spring
steel clips is simple and easy.
In each box of CADDY products,
you will find a clear instruction
sheet with all appropriate
technical information.
Code
2H4
A(mm)
N
2-3
700
4H24
3-8
900
4H58
8-14
900
4H912
14-20
900
1c. Basic Guidelines
ERICO® RECOMMENDS
SPRING STEEL FOR ONLY
INDOOR NON-CORROSIVE
ENVIRONMENTS.
ERICO® DOES NOT RECOMMEND THE INSTALLATION
OF CADDY SPRING STEEL
CLIPS ONTO ALUMINIUM
SECTION:
2b. Installation Advice
The 8.8 grade high tensile steel
screw has a cupped or hollow
cone point of contact to DIN 78.
This helps ensure a constant
contact pressure with a high
resistance to loosening or unscrewing.
Bolt grade 8.8 high tensile steel,
DIN EN 20898-1 : 1991
The endurance of a clamped
connection is determined by the
torque required.
Code
4H24i
4H58i
A(mm) M
3-8
N
M6
150
8-14 M6
150
• Because aluminium is a softer material, the clamping
effect would be reduced.
• The bi-metal connection
between the aluminium
and zinc coated clips would
create a galvanic corrosive
reaction causing the aluminium to corrode.
2c. Indirect Clamp
In this application, the bolt
setting forces are transferred
to the clamping component.
Bolts to tensile stress are 8.8
grade high tensile steel, to
DIN ISO 939.
NEVER APPLY
ADDITIONAL HOT DIP
GALVANISING TO CADDY
SPRING STEEL CLIPS:
• This would reduce or
eliminate the spring steel
retention force.
• The appropriate corrosion
protection has already been
applied.
Do not insert
any secondary
component
between the
beam and the
CADDY spring
steel clip
Up to a 15
degree
inclination from
the vertical axis
is acceptable
www.erico.com
In most applications, CADDY®
clamping components are
tightened with an open-ended
or ring spanner. The table
below gives a “guideline value”
derived from experience for
the force and leverage length
required for grades
6.8 and 8.8.
Screw
size
Manual
force N
Wrench
length mm
M6
375
110
M8
380
120
M10
390
170
M12
400
260
M16
430
530
N
E
W
S
227
11/15/07
2:14 PM
Page 228
TECHNICAL SECTION
Pipe Sizing Chart
Nominal
Size
8
10
15
16
20
25
32
40
50
65
80
90
100
125
150
175
200
225
250
300
375
400
450
500
525
600
675
Copper
Pipe OD
13
16
19
25
32
38
51
64
76
89
102
127
152
178
203
229
254
303
PVC
Pipe OD
43
55
69
82
90
110
160
225
250
315
400
Steel
Pipe OD
Pressure
PVC
PVC OD
14
17
21
14
17
21
27
34
42
48
60
75
89
27
33
42
48
60
76
89
113
140
165
114
140
168
219
219
250
280
315
273
324
406
457
508
60
FRC
(Pipe)
FRC
(Cutter)
131
122
189
177
269
257
350
430
335
415
519
505
HPDE
Actual OD
32
40
50
56
63
75
90
110
125
160
225
315
560
594
680
Ductile
Iron OD
CPVC
Pipe OD
34
42
48
60
Pex
Pipe OD
16
20
25
122
177
232
259
286
345
426
507
560
584
665
N
E
W
S
228
www.erico.com
11/15/07
2:14 PM
Page 229
TECHNICAL SECTION
C-Profile loads data
EOL
loading case A
loading case B
loading case C
ly
lz
Sc
St
A
1500
L[mm]
F from
recommended
tension
[N]
250
500
750
1000
1250
1500
1750
2000
738
369
246
185
148
123
105
92
F from
recommended
deflection
[N]
F from
recommended recommended
load
tension
[N]
[N]
F from
recommended
deflection
[N]
F from
load
tension
[N]
[N]
F from
recommended
deflection
[N]
recommended
load
[N]
1194
298
133
75
48
33
24
19
554
277
133
75
48
33
24
19
1200
900
2034
509
226
127
81
57
42
32
738
369
226
127
81
57
42
32
1477
738
492
369
295
246
211
185
3255
814
362
203
130
90
66
51
1477
738
362
203
130
90
66
51
554
277
185
138
111
92
79
69
600
300
0
250
500
750
1000 1250 1500 1750 2000
mm
!
z
y
f
f
A
y
f
B
8791
2788
8.336
9.665
65.57
N
q
All load ratings in NEWTON [N]
mm4
mm4
mm
mm
mm2
C
⑁zul =160 N/mm2
fzul =l/200
z
C-Cantilever loads data
C-EOL
loading case A
loading case B
loading case C
L[mm]
F from
recommended
tension
[N]
F from
recommended
deflection
[N]
recommended
load
[N]
F from
recommended
tension
[N]
F from
recommended
deflection
[N]
recommended
load
[N]
F from
recommended
tension
[N]
F from
recommended
deflection
[N]
160
180
200
220
240
260
280
300
577
513
462
420
385
355
330
308
686
542
439
363
305
260
224
195
577
513
439
363
305
260
224
195
577
513
462
420
385
355
330
308
915
723
585
484
407
346
299
260
577
513
462
420
385
346
299
260
288
256
231
210
192
178
165
154
1164
920
745
616
517
441
380
331
ly
lz
Sc
St
A
mm4
mm4
mm
mm
mm2
loading case D
F from
tension
load
[N]
[N]
288
256
231
210
192
178
165
154
8791
2788
8.336
9.665
65.57
F from
deflection
load
[N]
[N]
288
256
231
210
192
178
165
154
343
271
220
181
152
130
112
98
288
256
220
181
152
130
112
98
600
500
400
N 300
200
100
0
160
180
200
220
240
260
280
300
mm
z
q
F
A
www.erico.com
F1
B
229
F
F1
y
C
D
y
z
!
⑁zul =160 N/mm2
fzul =l/200
N
E
W
S
11/15/07
2:14 PM
Page 230
TECHNICAL SECTION
CADDY® ERISTRUT 41 x 21 x 2.5 mm without slots
loading case A
L[mm]
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
F from
recommended
tension
[N]
F from
recommended
deflection
[N]
1817
908
606
454
363
303
260
227
202
182
165
151
2204
551
245
138
88
61
45
34
27
22
18
15
loading case B
F from
load
tension
[N]
[N]
1817
551
245
138
88
61
45
34
27
22
18
15
3634
1817
1211
908
727
606
519
454
404
363
330
303
F from
recommended
deflection
[N]
loading case C
F from
load
tension
[N]
[N]
3527
882
392
220
141
98
72
55
44
35
29
24
3527
882
392
220
141
98
72
55
44
35
29
24
1363
681
454
341
273
227
195
170
151
136
124
114
F from
recommended
deflection
[N]
recommended
load
[N]
1294
323
144
81
52
36
26
20
16
13
11
9
1294
323
144
81
52
36
26
20
16
13
11
9
ly
lz
Sc
St
A
4000
3500
3000
2500
2000
1500
1000
500
0
500 1000
2000
y
f
A
y
f
B
3000
4000
5000
6000
mm
z
f
12084
52510
12.08
8.513
232.2
N
q
mm4
mm4
mm
mm
mm2
C
z
!
⑁zul =160 N/mm2
fzul =l/200
CADDY ERISTRUT 41 x 21 x 2.5 mm with slots
DC
L[mm]
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
loading case A
F from
recommended
tension
[N]
1309
655
436
327
262
218
187
164
145
131
119
109
F from
recommended
deflection
[N]
1824
456
203
114
73
51
37
28
23
18
15
13
loading case B
F from
load
tension
[N]
[N]
1309
456
203
114
73
51
37
28
23
18
15
13
2619
1309
873
655
524
436
374
327
291
262
238
218
F from
recommended
deflection
[N]
2918
730
324
182
117
81
60
46
36
29
24
20
loading case C
F from
load
tension
[N]
[N]
2619
730
324
182
117
81
60
46
36
29
24
20
982
491
327
245
196
164
140
123
109
98
89
82
F from
recommended
deflection
[N]
recommended
load
[N]
1070
268
119
67
43
30
22
17
13
11
9
7
982
268
119
67
43
30
22
17
13
11
9
7
ly
lz
Sc
St
A
3000
2500
2000
1500
1000
500
0
500 1000
2000
E
z
q
y
f
f
A
230
y
f
B
C
3000
4000
5000
6000
mm
S
9999
51980
10.826
9.775
190.61
N
N
W
mm4
mm4
mm
mm
mm2
z
!
⑁zul =160 N/mm2
fzul =l/200
www.erico.com
11/15/07
2:14 PM
Page 231
TECHNICAL SECTION
CADDY® ERISTRUT 41 x 41 x 2.5 mm without slots
loading case A
L[mm]
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
F from
recommended
tension
[N]
4966
2483
1655
1241
993
828
709
621
552
497
451
414
F from
recommended
deflection
[N]
loading case B
F from
load
tension
[N]
[N]
12929
3232
1437
808
517
359
264
202
160
129
107
90
4966
2483
1437
808
517
359
264
202
160
129
107
90
9931
4966
3310
2483
1986
1655
1419
1241
1103
993
903
828
F from
recommended
deflection
[N]
loading case C
F from
load
tension
[N]
[N]
20686
5171
2298
1293
827
575
422
323
255
207
171
144
9931
4966
2298
1293
827
575
422
323
255
207
171
144
3724
1862
1241
931
745
621
532
466
414
372
339
310
F from
recommended
deflection
[N]
recommended
load
[N]
7588
1897
843
474
304
211
155
119
94
76
63
53
3724
1862
843
474
304
211
155
119
94
76
63
53
ly
lz
Sc
St
A
10000
8000
6000
mm4
mm4
mm
mm
mm2
70880
89320
23.03
18.27
320.2
N
4000
2000
0
500 1000
2000
3000
4000
5000
6000
mm
CADDY ERISTRUT 41 x 41 x 2.5 mm with slots
AC
L[mm]
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
loading case A
F from
recommended
tension
[N]
3811
1905
1270
953
762
635
544
476
423
381
346
318
F from
recommended
deflection
[N]
10980
2745
1220
686
439
305
224
172
136
110
91
76
loading case B
F from
load
tension
[N]
[N]
3811
1905
1220
686
439
305
224
172
136
110
91
76
7622
3811
2541
1905
1524
1270
1089
953
847
762
693
635
F from
recommended
deflection
[N]
17569
4392
1952
1098
703
488
359
275
217
176
145
122
loading case C
F from
load
tension
[N]
[N]
7622
3811
1952
1098
703
488
359
275
217
176
145
122
2858
1429
953
715
572
476
408
357
318
286
260
238
F from
recommended
deflection
[N]
recommended
load
[N]
6445
1611
716
403
258
179
132
101
80
64
53
45
2858
1429
716
403
258
179
132
101
80
64
53
45
ly
lz
Sc
St
A
8000
7000
6000
5000
4000
3000
2000
1000
0
500 1000
2000
y
f
A
www.erico.com
231
y
f
B
C
3000
4000
5000
6000
mm
q
f
60200
88780
21.09
20.22
287.4
N
z
mm4
mm4
mm
mm
mm2
z
!
⑁zul =160 N/mm2
fzul =l/200
N
E
W
S
11/15/07
2:14 PM
Page 232
TECHNICAL SECTION
Cantilevers loads data
KH
loading case A
L[mm]
F from
recommended
tension
[N]
150
200
250
300
400
450
550
600
650
700
750
8276
6207
4966
4138
3103
2759
2257
2069
1910
1773
1655
F from
recommended
deflection
[N]
19846
11164
7145
4962
2791
2205
1476
1240
1057
911
794
recommended
load
[N]
loading case B
F from
recommended
tension
[N]
8276
6207
4966
4138
2791
2205
1476
1240
1057
911
794
8276
6207
4966
4138
3103
2759
2257
2069
1910
1773
1655
F from
recommended
deflection
[N]
26462
14885
9526
6615
3721
2940
1968
1654
1409
1215
1058
loading case C
F from
recommended
tension
[N]
recommended
load
[N]
8276
6207
4966
4138
3103
2759
1968
1654
1409
1215
1058
4138
3103
2483
2069
1552
1379
1129
1034
955
887
828
loading case D
F from
tension
load
[N]
[N]
F from
recommended
deflection
[N]
33668
18938
12120
8417
4735
3741
2504
2104
1793
1546
1347
4138
3103
2483
2069
1552
1379
1129
1034
955
887
828
F from
deflection
load
[N][N]
4138
3103
2483
2069
1552
1379
1129
1034
955
887
828
9923
5582
3572
2481
1395
1103
738
620
528
456
397
ly
lz
Sc
St
A
10000
8000
6000
4138
3103
2483
2069
1395
1103
738
620
528
456
397
mm4
mm4
mm
mm
mm2
70880
89320
23.03
18.27
320.2
N
4000
2000
0
160
180
200
220
240
260
280
300
mm
Ø 14 mm
ECB
loading case A
L[mm]
recommended load [N]
B
320
470
635
790
A
4470
3170
3330
2800
N
E
W
z
S
q
F
A
F1
B
232
F
F1
y
C
D
y
z
!
⑁zul =160 N/mm2
fzul =l/200
www.erico.com
11/15/07
2:14 PM
Page 233
INDEX
Description
Item #
Page
122
171690
107
24EM24
171960
101
1070075EG
597816
34
24EM58
171970
101
1070100EG
597817
34
24EM912
173590
101
1070125EG
597818
34
2H4
170010
94
1070150EG
597819
34
2H4CT
178510
95
1070200EG
597821
34
2H4CTBB
170210
96
1080075EG
597822
35
2H4CTBW
170170
96
1080100EG
597823
35
2H4ST3
173420
95
1080125EG
597824
35
32EM24
173600
101
1080150EG
597825
35
32EM58
173610
101
1080200EG
597826
35
32EM912
173620
101
1090075EG
597827
36
4010050EG
179398
28,40
1090100EG
597828
36
4010075EG
179399
28,40
1090125EG
597829
36
4010100EG
179420
28,40
1090150EG
597831
36
4010125EG
179421
28,40
1090200EG
597832
36
4010150EG
179422
28,40
10GDT12-17
160380
113
4010200EG
179423
28,40
10GTD17-22
160390
113
4010250EGAU
179424
28,40
10MEBN
172140
117
4010300EG
179425
28,40
115M0050EG
597860
25
4010400EG
179426
28,40
115M0075EG
597870
25
4010500EG
179427
28,40
115M0100EG
597880
25
4010600EG
179428
28,40
115M0125EG
597890
25
4010800EG
179429
28,40
115M0150EG
597900
25
4011000EG
179430
28,40
115M0200EG
597910
25
4011200EG
179431
28,40
115M0250EG
597920
25
4011400EG
179432
28,40
115M0300EG
597930
25
4011600EG
179433
28,40
115M0400EG
597940
25
4011800EG
179434
28,40
115M0500EG
597950
25
4012000EG
179435
28,40
115M0600EG
597960
25
4012400EG
179436
28,40
115M0800EG
597970
25
4020050CP
179312
42
122M10MA
174700
107
4020075CP
179313
42
122M10TI
175070
108
4020100CP
179314
42
122M8MA
174690
107
4020125CP
179315
42
122M8TI
174980
108
4020150CP
179316
42
122T10
160240
108
4020200CP
179317
42
12EM24-2
179810
195
4020250CP
179318
42
12EM58-2
179820
195
4020300CP
179319
42
12EM912-2
179830
195
4020350CP
179320
42
12M24SM-2
179690
194
4020400CP
179321
42
12M58SM-2
179700
194
4020500CP
179322
42
12M912SM-2
179710
194
4020600CP
179323
42
12P24SM
175220
99
4020800CP
179324
42
12P4SM
175210
99
4270050EG
178300
29,41
12P58SM
175230
99
4270075EG
178301
29,41
12P912SM
175240
99
4270100EG
178302
29,41
16EM24
171740
101
4270125EG
178303
29,41
16EM58
171490
101
4270150EG
178304
29,41
16EM912
173570
101
4270200EG
178305
29,41
20EM24
171800
101
4270250EGAU
178306
29,41
20EM58
171950
101
4270300EG
178307
29,41
20EM912
173580
101
4270400EG
178308
29,41
www.erico.com
Description
233
Item #
Page
11/15/07
2:14 PM
Page 234
INDEX
Description
Item #
Page
Description
Item #
Page
4270500EG
4270600EG
178309
29,41
5110250CPAU
179350
45
178310
29,41
5110300CPAU
179351
45
4270800EG
178311
29,41
5110400CPAU
179352
45
4H24
170020
94
5110500CPAU
179353
45
4H24-2
172130
117
5110600CPAU
179354
45
4H24CT
178520
95
6Z34CTS
172960
114
4H24CTBB
170220
96
7000050PL
179355
46
4H24CTBR-2
170280
193
7000075PL
179356
46
4H24CTBW
170180
96
7000100PL
179357
46
4H24I
170150
94
7000125PL
179358
46
4H24ST3
171500
95
7000150PL
179359
46
4H58
170030
94
7000200PL
179360
46
4H58-2
179620
193
7000250PLAU
179361
46
4H58CT
178530
95
7000300PL
179362
46
4H58CTBB
170240
96
7000400PL
179363
46
4H58CTBR-2
170300
193
7000500PLAU
179364
46
4H58CTBW
170190
96
7000600PLAU
179365
46
4H58I
170250
94
7000800PL
179366
46
4H58ST3
171530
95
812EM24
160120
101
4H912
170040
94
812EM58
160130
101
4H912-2
179630
193
812EM912
160140
102
4H912CT
178540
95
812M24SM
160050
99
4H912CTBB
170260
96
812M4SM
160040
99
4H912CTBR-2
170310
193
812M58SM
160060
99
4H912CTBW
170200
96
812M912SM
160070
99
4H912ST3
171640
95
8EM24-2
179780
195
4Z34CTS
172950
114
8EM58-2
179790
195
5100050EG
129325
30,44
8EM912-2
179800
195
5100075EG
129326
30,44
8EP24
172150
101
5100100EG
129327
30,44
8EP58
172160
101
5100125EG
129328
30,44
8EP912
175100
101
5100150EG
129329
30,44
8M24SM-2
179650
195
5100200EG
129330
30,44
8M58SM-2
179660
194
5100250EGAU
129331
30,44
8M912SM-2
179670
194
5100300EG
129332
30,44
8MEBN
172130
117
5100400EG
129333
30,44
AAC 41 X 41mm
310221
144
5100500EGAU
129334
30,44
AB
171120
116
5100600EGAU
129335
30,44
AC-2 41 X 21 X 2.5mm
310265
144
5100800EG
129336
30,44
AC-2 41 X 41 X 2.5mm
310326
144
5101000EG
129337
30,44
ADK
313301
140
5101200EG
129338
30,44
ADK421
313305
151
5101400EG
129339
30,44
BTK310-11mm
598501
89
5101600EG
129340
30,44
BTK310-13mm
598502
89
5101800EG
129341
30,44
BTK310-M10
389890
89
5102000EG
129342
30,44
BTK310-M12
388890
89
5102400EG
129343
30,44
CA10
574420
166
5110050CPAU
179344
45
CA6
589890
166
5110075CPAU
179345
45
CA8
574410
166
5110100CPAU
179346
45
C-E0L 27x18 180mm
599879
137
5110125CPAU
179347
45
C-E0L 27x18 300mm
599880
137
5110150CPAU
179348
45
C-Fix M10
584520
138
5110200CPAU
179349
45
C-Fix M10 X 40 mm
584560
138
234
www.erico.com
11/15/07
2:14 PM
Page 235
INDEX
Description
Item #
Page
C-Fix M6
584500
138
HDPC 20-24 mm
577002
22,27
C-Fix M8
584510
138
HDPC 219-226 mm
577028
22,27
C-Fix M8 X 30 mm
584530
138
HDPC 25-30 mm
577003
22,27
D1
336280
169
HDPC 267-273 mm
577032
22,27
D2
339100
169
HDPC 31-35 mm
577004
22,27
D3
339110
169
HDPC 40-45 mm
577006
22,27
DLP
313310
151
HDPC 48-53 mm
577007
22,27
E 0L 2m 27x18x1.25
599996
136
HDPC 60-65 mm
577009
22,27
EBC
170380
104
HDPC 76-81 mm
577011
22,27
EBC12P
172710
106
HDPC 88-94 mm
577013
22,27
EBC16M
172590
105
HDPCI 108-116 mm
577048
5
EBC16MSM
172660
105
HDPCI 138-145 mm
577052
5
EBC16P
172720
106
HDPCI 165-171 mm
577055
5
EBC20M
172600
105
HDPCI 19-23 mm
577034
5
EBC20MSM
172670
105
HDPCI 219-225 mm
577061
5
EBC24M
172610
105
HDPCI 24-28 mm
577035
5
EBC24MSM
172680
105
HDPCI 265-273 mm
577066
5
EBC32M
172620
105
HDPCI 33-37 mm
577037
5
EBC32MSM
172690
105
HDPCI 40-45 mm
577038
5
EBC812M
160200
105
HDPCI 47-52 mm
577039
5
EBC812MSM
160180
105
HDPCI 60-65 mm
577041
5
EBC8P
172700
106
HDPCI 73-78 mm
577043
5
ECN EO M10
315350
139
HDPCI 88-93 mm
577045
5
ECN EO M6
315370
139
HW10
187290
112
ECN EO M8
315340
139
HW12
187300
112
EER
171470
109
HW6M
188740
112
EERM10MA
173190
110
HW8
187280
112
EERM10TI
173140
110
HW8M
188780
112
EERM8MA
173180
110
IHT 20mm
578680
165
EERM8TI
173130
110
IHT 25mm
578690
165
EERS
173080
109
INC8
336290
106
EERT10
160250
110
INC8
336290
106
EM24
170050
100
ISN M10
187360
165
EM24-2
179720
194
ISN M6
187340
165
EM24SM
170530
100
ISN M8
187350
165
EM58
170060
100
ISSP Plate
190800
146
EM58-2
179730
194
ISSP Plate M10
190830
146
EM58SM
172060
100
ISSP Plate M6
190810
146
EM912
170070
100
ISSP Plate M8
190820
146
EM912-2
179740
194
J1
170370
103
EM912SM
178150
100
J2
171590
103
EQLS130
597792
80
K12
170670
115
EQLS50
597791
80
K16
170680
115
EQLS85
597780
80
K20
170690
115
EQV
597590
79
K8
170660
115
EQVS
597770
79
KIT U Silent 450
589980
128
EQ-ZAB
597790
81
KIT U Silent 600
589990
128
EQZS
597790
80
KP27 M8 X 30 mm
590076
139
HB2
336030
90
KP27 M8 X 40 mm
590077
139
HDPC 110-116 mm
577016
22,27
KX
170870
115
HDPC 140-146 mm
577020
22,27
M10GTD12-17
160340
113
HDPC 159-165 mm
577022
22,27
M10GTD17-22
160370
113
www.erico.com
Description
235
Item #
Page
11/15/07
2:14 PM
Page 236
INDEX
Description
Item #
Page
M10MA24
173320
96
M10MA4
173310
96
M10MA58
173330
M10MA912
Description
Item #
Page
CADDY MACROFIX 240LF 123-128 mm
595046
4
595047
4
96
CADDY MACROFIX 240LF 14-19mm
595035
4
173340
96
595048
4
M10MAB
173450
117
595036
4
M10MAJ1
173370
103
595037
4
M10MAJ2
173400
103
595038
4
M10TI
170910
116
595039
4
M10TI24
175000
97
595040
4
M10TI4
174990
97
595041
4
M10TI58
175010
97
595042
4
M10TI912
175020
97
595043
4
M10TIB
175030
116
595044
4
M10TIJ1
175050
104
CADDY MACROFIX 250 108-116mm
595930
3
M10TIJ2
175060
104
595940
3
M6TI
174800
116
596460
3
M6TI24
174820
97
595950
3
M6TI4
174810
97
595955
3
M6TI58
174830
97
596470
3
M6TI912
174840
97
595960
3
M8GTD12-17
160330
113
595970
3
M8GTD17-22
160360
113
596480
3
M8MA24
173280
96
596490
3
M8MA4
173270
96
596500
3
M8MA58
173290
96
596510
3
M8MA912
173300
96
595860
3
M8MAB
173440
117
595870
3
M8MAJ1
173360
103
595880
3
M8MAJ2
173390
103
595885
3
M8TI
170900
116
596450
3
M8TI24
174910
97
595890
3
M8TI4
174900
97
595900
3
M8TI58
174920
97
595910
3
M8TI912
174930
97
595920
3
M8TIB
174940
116
CADDY MACROFIX 250 NI 108-116mm
596360
9
M8TIJ1
174960
104
596380
9
M8TIJ2
174970
104
596410
9
MACRO V ISO 200 M8/10
582450
78
596220
9
582470
78
596230
9
582480
78
596250
9
582490
78
596260
9
582500
78
596270
9
582510
78
596280
9
582530
78
596290
9
582540
78
596300
9
582550
78
596310
9
582560
78
596320
9
582580
78
CADDY MACROFIX S M10 108-116mm
595720
190
582590
78
595730
190
582600
78
595740
190
582810
78
595750
190
CADDY® MACROFIX 240LF 108-113 mm
595045
4
595755
190
®
236
www.erico.com
11/15/07
2:14 PM
Page 237
INDEX
Description
Item #
595760
595770
Page
Description
Item #
190
PW2M10TIIN
175620
114
190
PW2M8TIIN
175610
114
595775
190
PW2T10TIIN
175630
114
595780
190
RPS150T3 EG
182580
132
595700
190
RPS150T4 MCP
182590
132
595710
190
RPS150T7
182680
132
595595
190
RPS150T8
182690
132
595600
190
RPS300T3 MCP
182620
132
595610
190
RPS300T4 MCP
182630
132
595620
190
RPS300T7
182700
132
595630
190
RPS300T8
182710
132
595640
190
RPS50H4EG
182470
130
595650
190
RPS50H4HD
182500
130
595660
190
RPS50H6EG
182480
130
595670
190
RPS50H6HD
182510
130
595675
190
RPS600T4 MCP
182650
132
595680
190
RPS600T8
182720
132
595690
190
S24
172030
98
595695
190
S4
175480
98
CADDY MACROFIX S NI M10 104-110mm
595520
189
S58
171760
98
595530
189
S912
171770
98
595535
189
SBFF 6-6
588430
126
595540
189
SBFF 8-8
588440
126
595550
189
SBFK
588620
128
595555
189
SBMF 10-10
588580
127
595560
189
SBMF 8-10
588570
127
595505
189
SBMF 8-8
588560
127
595510
189
SBMK
588610
127
595400
189
SGBC
588500
126
595410
189
SL2/1
195800
120
595420
189
SL2/10
195820
120
595430
189
SL2/2
195805
120
595440
189
SL2/3
195810
120
595450
189
SL2/5
195815
120
595470
189
SL3/1
195825
120
595475
189
SL3/10
195845
120
595480
189
SL3/2
195830
120
595490
189
SL3/3
195835
120
595500
189
SL3/5
195840
120
PESHO
580564
205
SLADCP
195851
122
PESHOS
580565
207
SLADS
195852
122
PESHT
580566
209
SLD15L1
195950
121
PESHTS
580567
211
SLD15L10
195930
121
PESMO
580560
204
SLD15L2
195920
121
PESMOS
580561
206
SLD15L3
195955
121
PESMT
580562
208
SLD15L5
195925
121
PESMTS
580563
210
SLESH6x60
195858
123
PHW6
188840
112
SLESM6x30
195854
123
PHW8
188850
112
SLESM8x40
195856
123
PPRPS25H4
182450
131
SLICK M10
174350
147
PPRPS25H6
182460
131
SLICK M12
174550
147
PW2
175590
113
SLICK M6
174460
147
www.erico.com
237
Page
11/15/07
2:14 PM
Page 238
INDEX
Description
Item #
Page
SLICK M8
174340
147
SLWC
195853
122
SLWPT
195859
SO12A
Description
Item #
Page
TDHP MK2
159441
111
TI024
160010
97
123
TI04
160000
97
597811
37
TI058
160020
97
SO16A
597812
37
TI0912
160030
97
SO20A
597813
37
TK300-13mm
389520
88
SO24A
597814
37
TK300-11mm
389510
88
SO32A
597815
37
TK300-9mm
389500
88
SR24
171810
98
TMN M10 x 40
590090
166
SR4
175540
98
TMN M8 x 30
590080
166
SR58
175550
98
TPC112
187192
179
SR912
172020
98
TPC238
187193
179
CADDY® SUPERFIX 243 101-106mm
400076
2
TSGB16
187190
179
CADDY SUPERFIX 243 108-114mm
400077
2
TSGB24
187191
179
400063
2
TSM0037
389046
85
400064
2
TSM0050
389047
85
400065
2
TSM0062
389048
85
400066
2
TSM0075
389049
85
400067
2
TSM0087
389053
85
400068
2
TSM0112
389054
85
400069
2
TSM0137
389055
85
400070
2
TSM0162
389056
85
595870
2
TSMI0062
389057
86
400071
2
TSMI0075
389058
86
400072
2
TSMI0087
389059
86
400073
2
TSMI0100
389061
86
400074
2
TSMI0112
389062
86
400075
2
TSMI0125
389063
86
CADDY® SUPERKLIP 11.8-14.3mm
389001
84
TSMI0137
389064
86
CADDY SUPERKLIP 14.3-16.8mm
389002
84
TSMI0150
389065
86
389003
84
TSMI0162
389066
86
389004
84
TSMI0200
389067
86
389005
84
TSMI0212
389068
86
389006
84
UA 506
315085
149
389007
84
UA 506
315080
149
389008
84
UA 506
315045
150
389009
84
UA 608
315095
149
389011
84
UA 608
315090
149
389012
84
UA 608
315055
150
389013
84
UA 810
315105
149
389014
84
UA 810
315100
149
T10
160260
116
UA 810
315065
150
T10B
160280
116
UA 812
315115
149
T10J1
160220
104
UA 812
315110
149
T10J2
160230
104
UA 812
315075
150
TDH
179920
111
UD 506
315040
150
TDHAM10
179955
111
UD 608
315050
150
TDHAM8
179945
111
UD 810
315060
150
TDHIM8
179510
111
UD 812
315070
150
TDHM10
179950
111
UM 506
314995
149
TDHM6
179930
111
UM 506
315000
149
TDHM8
179940
111
UM 608
315015
149
238
www.erico.com
11/15/07
2:14 PM
INDEX
Description
Item #
Page
UM 608
315010
149
UM 810
315025
149
UM 810
315020
149
UM 812
315035
149
UM 812
315030
149
UM 816
315036
149
UM 816
315037
149
UM506-2
315140
184
UM608-2
315150
184
UM810-2
315160
184
UM812-2
315170
184
VAFT
190330
102
VDF M10 x 45
583860
166
VF14
179850
102
WDCM10
160930
112
WDCM8
160920
112
ZEA100
387500
153
ZEA102
387520
153
ZEA104
387540
154
ZEA106
387560
154
ZEA107
387570
154
ZEA108
387580
155
ZEA109
387590
155
ZEA110
387450
153
ZGA501
388270
160
ZSA301
387740
158
ZSA304
388110
160
ZT605
388080
150
ZTA601
387700
151
ZTA605
387190
150
ZUA400
387750
159
ZUA401
387760
159
ZWA200
313330
156
ZWA200
387600
156
ZWA202
387620
156
ZWA203
387630
156
ZWA205
387650
157
ZWA207
387670
157
ZWA209
387690
157
ZWA214
387890
159
ZWA215
387900
160
ZZ704
313870
152
ZZA701
388400
161
ZZA702
387720
158
www.erico.com
239
Page 239
11/15/07
2:14 PM
Page 240
INDEX
Part No.
Description
Page
Part No.
Description
Page
129325
CADDY® EZ RISER #510 Riser Clamp 1/2" EG 5100050EG
30,44
170050
Hammer On Clip EM24
100
129326
CADDY EZ RISER #510 Riser Clamp 3/4" EG 5100075EG
30,44
170060
Hammer On Clip EM58
100
129327
CADDY EZ RISER #510 Riser Clamp 1" EG 5100100EG
30,44
170070
Hammer On Clip EM912
100
129328
CADDY EZ RISER #510 Riser Clamp 1-1/4" EG 5100125EG
30,44
170150
Hammer On Threaded Rod Hanger 4H24I
94
129329
CADDY EZ RISER #510 Riser Clamp 1-1/2" EG 5100150EG
30,44
170170
Hammer On BC with White Cable Tie 2H4CTBW
96
129330
30,44
170180
96
129331
CADDY EZ RISER #510 Riser Clamp 2-1/2" EG 5100250EGAU
30,44
170190
96
129332
30,44
170200
96
129333
30,44
170210
Hammer On BC with Black Cable Tie 2H4CTBB
96
129334
CADDY EZ RISER #510 Riser Clamp 5" EG 5100500EGAU
30,44
170220
96
129335
CADDY EZ RISER #510 Riser Clamp 6" EG 5100600EGAU
30,44
170240
96
129336
30,44
170250
Hammer On Threaded Rod Hanger 4H58I
94
129337
30,44
170260
129338
30,44
170280
SS Hammer On Beam Clamp with Strap 4H24CTBR-2
193
129339
#510 Riser Clamp 14" EG 5101400EG
30,44
170300
193
129340
30,44
170310
193
129341
30,44
170370
Hammer On C Purlin Clip J1
103
129342
30,44
170380
Beam Clamp EBC
104
129343
30,44
170530
Hammer On Clip with Stud EM24SM
100
159441
Decking Hole Punch Tool TDHP MK2
111
170660
Rod Mounted Tubing Support K8
115
159442
Decking Hole Punch Tool Blade Set
111
170670
115
160000
Hammer On Threaded Rod Hanger TI04
97
170680
115
160010
97
170690
115
160020
97
170870
Rod Mounted Tubing Support KX
115
160030
97
170900
Rod Hanger M8TI
116
160040
Hammer On Finger Close Pipe Clamp 812M4SM
99
170910
Rod Hanger M10TI
116
160050
99
171120
Angle Bracket AB
116
160060
99
171470
Decking Clip EER
109
160070
99
171490
Hammer On Finger Close Pipe Clamp 16EM58
101
160120
101
171500
Hammer On Strap Clamp 4H24ST3
160130
101
171530
160140
101
171590
Hammer On C Purlin Clip J2
160180
Beam Clamp with Finger Close Pipe Clamp EBC812MSM
105
171640
160200
Beam Clamp with Finger Close Pipe Clamp EBC812M
105
171690
Purlin Clip 122
107
160220
Hammer On C Purlin Rod Clip T10J1
104
171740
101
160230
Hammer On C Purlin Rod Clip T10J2
104
171760
Hammer On Strap Hanger S58
98
160240
Purlin Rod Clip 122T10
108
171770
98
160250
Decking Clip with Rod Hanger EERT10
110
171800
160260
Rod Hanger T10
116
171810
Hammer On Strap Hanger SR24
160280
Ceiling Mounted Rod Hanger T10B
116
171850
100
160330
Decking Insert with Rod Hanger M8GTD12-17
113
171950
101
160340
113
171960
101
160360
113
171970
101
160370
113
172020
160380
Decking Insert with Rod Hanger 10GDT12-17
113
172030
160390
Decking Insert with Rod Hanger 10GTD17-22
113
172060
100
160920
Decking Insert WDCM8
112
172130
Rod Clip 8MEBN
117
160930
Decking Insert WDCM10
112
172140
Rod Clip 10MEBN
117
170010
Hammer On Beam Clamp 2H4
94
172150
Hammer On Pipe Clamp 8EP24
101
170020
94
172160
101
170030
94
172590
105
170040
94
172600
105
240
96
95
95
103
95
101
98
98
98
www.erico.com
11/15/07
2:14 PM
Page 241
INDEX
Part No.
Description
Page
Part No.
Description
Page
172610
105
174940
Ceiling Mounted Rod Hanger M8TIB
116
172620
105
174960
Hammer On C Purlin Rod Clip M8TIJ1
104
172660
105
174970
104
172670
105
174980
Purlin Rod Clip 122M8TI
108
172680
105
174990
Hammer On Threaded Rod Hanger M10TI4
97
172690
105
175000
97
172700
Beam Clamp with Pipe Clamp EBC8P
106
175010
97
172710
106
175020
172720
106
175030
Ceiling Mounted Rod Hanger M10TIB
116
172950
Rod Mounted Cable Tray Support 4Z34CTS
114
175050
104
172960
Rod Mounted Cable Tray Support 6Z34CTS
114
175060
104
173080
Decking Clip with Strap Hanger EERS
109
175070
Purlin Rod Clip 122M10TI
108
173130
Decking Clip with Rod Hanger EERM8TI
110
175100
101
173140
Decking Clip with Rod Hanger EERM10TI
110
175210
Hammer On Pipe Clamp 12P4SM
99
173180
Decking Clip with Rod Hanger EERM8MA
110
175220
99
173190
Decking Clip with Rod Hanger EERM10MA
110
175230
99
173270
Hammer On Rod Hanger M8MA4
97
175240
99
173280
97
175480
98
173290
97
175540
98
173300
97
175550
173310
97
175590
Purlin Clip PW2
113
173320
97
175610
Purlin Rod Clip PW2M8TIIN
114
173330
97
175620
Purlin Rod Clip PW2M10TIIN
114
173340
97
175630
Purlin Rod Clip PW2T10TIIN
114
173360
Hammer On C Purlin Rod Clip M8MAJ1
103
178300
CADDY® SLOT LOCK #427 Clevis Hanger 1/2" EG 4270050EG
29,41
173370
103
178301
CADDY SLOT LOCK #427 Clevis Hanger 3/4" EG 4270075EG
29,41
173390
103
178302
CADDY SLOT LOCK #427 Clevis Hanger 1" EG 4270100EG
29,41
173400
103
178303
CADDY SLOT LOCK #427 Clevis Hanger 1-1/4" EG 4270125EG
29,41
173420
95
178304
CADDY SLOT LOCK #427 Clevis Hanger 1-1/2" EG 4270150EG
29,41
173440
Ceiling Mounted Rod Hanger M8MAB
117
178305
29,41
173450
Ceiling Mounted Rod Hanger M10MAB
117
178306
CADDY SLOT LOCK #427 Clevis Hanger 2-1/2" EG 4270250EGAU
29,41
173570
101
178307
29,41
173580
101
178308
29,41
173590
101
178309
29,41
173600
101
178310
29,41
173610
101
178311
29,41
173620
101
178510
Hammer On BC for Cable Ties 2H4CT
95
174340
CADDY® SLICK M8 Threaded Strut Nut
147
178520
95
174350
CADDY SLICK M10 Threaded Strut Nut
147
178530
95
174460
147
178540
95
174550
147
179312
#402 Copper Clevis Hanger 1/2" CP 4020050CP
42
174690
Purlin Rod Clip 122M8MA
107
179313
#402 Copper Clevis Hanger 3/4" CP 4020075CP
42
174700
Purlin Rod Clip 122M10MA
107
179314
#402 Copper Clevis Hanger 1" CP 4020100CP
42
174800
Rod Hanger M6TI
116
179315
#402 Copper Clevis Hanger 1-1/4" CP 4020125CP
42
174810
97
179316
42
174820
97
179317
42
174830
97
179318
42
174840
97
179319
42
174900
97
179320
42
174910
97
179321
42
174920
97
179322
42
174930
97
179323
42
www.erico.com
241
97
98
11/15/07
2:14 PM
Page 242
INDEX
Part No.
Description
Page
Part No.
Description
Page
179324
42
179710
SS Hammer On Finger Close Pipe Clamp 12M912SM-2
194
179344
CADDY® EZ RISER #511 Copper Riser Clamp 1/2" CP 5110050CPAU
45
179720
SS Hammer On Clip EM24-2
194
179345
CADDY EZ RISER #511 Copper Riser Clamp 3/4" CP 5110075CPAU
45
179730
194
179346
CADDY EZ RISER #511 Copper Riser Clamp 1" CP 5110100CPAU
45
179740
194
179347
CADDY EZ RISER #511 Copper Riser Clamp 1-1/4" CP 5110125CPAU
45
179780
SS Hammer On Finger Close Pipe Clamp 8EM24-2
195
179348
45
179790
195
179349
45
179800
195
179350
45
179810
195
179351
45
179820
195
179352
45
179830
195
179353
45
179850
Hammer On Clip VF14
102
179354
45
179920
Decking Hanger TDH
111
179355
#700 Offset Pipe Clamp 1/2" PL 7000050PL
46
179930
Decking Hanger TDHM6
111
179356
#700 Offset Pipe Clamp 3/4" PL 7000075PL
46
179940
111
179357
#700 Offset Pipe Clamp 1" PL 7000100PL
46
179945
Decking Hanger TDHAM8
111
179358
#700 Offset Pipe Clamp 1-1/4" PL 7000125PL
46
179950
111
179359
#700 Offset Pipe Clamp 1-1/2" PL 7000150PL
46
179955
Decking Hanger TDHAM10
111
179360
46
182450
CADDY® PYRAMID 25 PPRPS25H4
131
179361
#700 Offset Pipe Clamp 2-1/2" PL 7000250PLAU
46
182460
CADDY PYRAMID 25 PPRPS25H6
131
179362
46
182470
CADDY® PYRAMID 50 RPS50H4EG
130
179363
46
182480
CADDY PYRAMID 50 RPS50H6EG
130
179364
#700 Offset Pipe Clamp 5" PL 7000500PLAU
46
182500
CADDY PYRAMID 50 RPS50H4HD
130
179365
#700 Offset Pipe Clamp 6" PL 7000600PLAU
46
182510
CADDY PYRAMID 50 RPS50H6HD
130
179366
46
182515
CADDY PYRAMID 50 RPS50H4MCP
130
179398
#401 Clevis Hanger 1/2" EG 4010050EG
28,40
182520
CADDY PYRAMID 50 RPS50H6MCP
130
179399
#401 Clevis Hanger 3/4" EG 4010075EG
28,40
182580
CADDY® PYRAMID 150 RPS150T3 EG
132
179420
#401 Clevis Hanger 1" EG 4010100EG
28,40
182590
CADDY PYRAMID 150 RPS150T4 MCP
132
179421
#401 Clevis Hanger 1-1/4" EG 4010125EG
28,40
182620
CADDY® PYRAMID 300 RPS300T3 MCP
132
179422
#401 Clevis Hanger 1-1/2" EG 4010150EG
28,40
182630
CADDY PYRAMID 300 RPS300T4 MCP
132
179423
28,40
182650
CADDY® PYRAMID 600 RPS600T4 MCP
132
179424
#401 Clevis Hanger 2-1/2" EG 4010250EGAU
28,40
182680
CADDY® PYRAMID 150 RPS150T7
132
179425
28,40
182690
CADDY PYRAMID 150 RPS150T8
132
179426
28,40
182700
CADDY® PYRAMID 300 RPS300T7
132
179427
28,40
182710
132
179428
28,40
182720
132
179429
28,40
187190
Adjustable screw gun bracket TSGB16
179
179430
28,40
187191
Adjustable screw gun bracket TSGB24
179
179431
28,40
187192
Tube & pipe clamp TPC112
179
179432
28,40
187193
Tube & pipe clamp TPC238
179
179433
28,40
187280
Wedge Nut for Holorib Decking HW8
112
179434
28,40
187290
112
179435
28,40
187300
112
179436
28,40
187340
CADDY® ISN Nut M6
165
179510
Decking Hanger TDHIM8
111
187350
CADDY ISN Nut M8
165
170020
SS Hammer On Beam Clamp 4H24
94
187360
CADDY ISN Nut M10
165
170030
94
188740
Wedge Nut for Holorib Decking HW6M
112
170040
94
188780
Wedge Nut for Holorib Decking HW8M
112
179650
194
188840
Wedge Nut for Holorib Decking PHW6
112
179660
194
188850
Wedge Nut for Holorib Decking PHW8
112
179670
194
190330
Installation Tool, VF Clips VAFT
102
179690
194
190800
CADDY® ISSP Plate
146
179700
194
190810
CADDY ISSP Plate M6
146
242
www.erico.com
11/15/07
2:14 PM
Page 243
INDEX
Part No.
Description
Page
Part No.
Description
Page
190820
CADDY® ISSP Plate M8
146
315085
UA 506 ERISTRUT Channel Nut with Spring M6 EG
149
190830
CADDY ISSP Plate M10
146
315090
Strut Nut, UA 608 P3
149
195800
CADDY® SPEED LINK SL2/1
120
315095
149
195805
CADDY SPEED LINK SL2/2
120
315100
149
195810
120
315105
149
195815
120
315110
149
195820
120
315115
149
195825
120
315120
UA810-2, Stainless Steel strut nuts
184
195830
120
315140
UM506-2, Stainless Steel strut nuts
184
195835
120
315150
184
195840
120
315160
184
195845
120
315170
184
195851
CADDY SPEED LINK Air Duct Corner Protector SLADCP
122
315180
184
195852
CADDY SPEED LINK Screw-on Air Duct Angle Support SLADS
122
315190
184
195853
CADDY SPEED LINK Wire Cutter SLWC
122
315200
184
195854
CADDY SPEED LINK Eyebolt M6 x 30 SLESM6x30
123
315340
ECN CHANNEL NUT EOL/EO M8
139
195856
CADDY SPEED LINK Eyebolt M8 x 40 SLESM8x40
123
315350
139
195858
CADDY SPEED LINK Eyebolt H6 x 40 SLESH6x40
123
315370
139
195859
CADDY SPEED LINK Wire Insulation Protection Tube SLWPT
123
336030
Beam Clamp EG HB2
195920
CADDY SPEED LINK SLD15L2
121
336040
Beam Clamp EG HB2
195925
121
336280
Purlin Clip D1
169
195930
121
336290
Strut Mounting Clamp INC8
152
195950
121
336290
INC8 Strut Mounting Clamps
152
195955
121
339100
Purlin Clip D2
169
310221
CADDY® ERISTRUT, AAC 41 X 41mm Back to Back HDG (3M)
144
339110
Purlin Clip D3
169
310265
CADDY ERISTRUT, AC-2 41 X 21 X 2.5mm Slotted 316SS (6M)
144
388080
ZTA605 Beam Clamp Internal
150
310326
CADDY ERISTRUT, AC-2 41 X 41 X 2.5mm Slotted 316SS (6M)
144
387450
ZEA110 Wide Tee Plate
153
387500
ZEA100 Square Washer
153
90
90
313301
ADK End Cap for EOL C-Channels and Cantilever
140
387520
ZEA102 2-hole Flat Plate
153
313305
ADK421 Strut End Caps
151
387540
ZEA104 4-hole Flat Plate
154
313310
DLP Plastic Strut Capping
151
387560
ZEA106 3-hole Adjustable Flat Plate
154
313330
ZWA200 2-hole Angle Bracket With bolts
156
387570
ZEA107 Flat Right Angle Bracket
154
313870
ZZ704 Window Bracket
152
387580
ZEA108 Tee Bracket
155
314995
Strut Nut, UM 506 EG
149
387590
ZEA109 Cross Plate
155
315000
Strut Nut, UM 506 P3
149
387600
ZWA200 2-hole Angle Bracket
156
315010
Strut Nut,UM 608 P3
149
387620
156
315015
Strut Nut,UM 608 EG
149
387630
156
315020
Strut Nut,UM 810 P3
149
387650
157
315025
Strut Nut,UM 810 EG
149
387670
157
315030
Strut Nut,UM 812 P3
149
387690
ZWA209 Wide Tee 4-hole Angle Bracket
157
315035
Strut Nut,UM 812 EG
149
387700
ZTA601 Strut to Beam Clamp
151
315036
Strut Nut,UM 816 EG
149
387720
ZZA702 Traverse Support Bracket
158
315037
Strut Nut,UM 816 P3
149
387740
ZSA301 Single Cross Over Bracket 41 x 41 mm
158
315040
Strut Nut, UD 506 P3
150
387750
ZUA400 Offset Tee Bracket 41 x 41 mm
159
315045
Strut Nut, UD 506 EG
150
387760
ZUA401 Offset Tee Bracket41 x 21 mm
159
315050
150
387890
ZWA214 Offset Angle Bracket Left
159
315055
150
387900
ZWA215 Offset Angle Bracket Right
160
315060
150
388110
ZSA304 Corner Angle Bracket
160
315065
150
388270
ZGA501 Single Base Plate
160
315070
150
388400
ZZA701 Traverse Corner Bracket
161
315075
150
388890
Beam Clamp BTK310-M12
89
315080
149
389001
84
www.erico.com
243
11/15/07
2:14 PM
Page 244
INDEX
Part No.
Description
Page
Part No.
Description
Page
389002
84
577006
HDPC 40-45 mm
22,27
389003
84
577007
HDPC 48-53 mm
22,27
389004
84
577009
HDPC 60-65 mm
22,27
389005
84
577011
HDPC 76-81 mm
22,27
389006
84
577013
HDPC 88-94 mm
22,27
389007
84
577016
HDPC 110-116 mm
22,27
389008
84
577020
HDPC 140-146 mm
22,27
389009
84
577022
HDPC 159-165 mm
22,27
389011
84
577028
HDPC 219-226 mm
22,27
389012
84
577032
HDPC 267-273 mm
22,27
389013
84
577034
HDPCI 19-23 mm
5
389014
84
577035
HDPCI 24-28 mm
5
389046
TSM0037
85
577037
HDPCI 33-37 mm
5
389047
TSM0050
85
577038
HDPCI 40-45 mm
5
389048
TSM0062
85
577039
HDPCI 47-52 mm
5
389049
TSM0075
85
577041
HDPCI 60-65 mm
5
389053
TSM0087
85
577043
HDPCI 73-78 mm
5
389054
TSM0112
85
577045
HDPCI 88-93 mm
5
389055
TSM0137
85
577048
HDPCI 108-116 mm
5
389056
TSM0162
85
577052
HDPCI 138-145 mm
5
389057
TSMI0062
86
577055
HDPCI 165-171 mm
5
389058
TSMI0075
86
577061
HDPCI 219-225 mm
5
389059
TSMI0087
86
577066
HDPCI 265-273 mm
389061
TSMI0100
86
578680
Sound Reduction Rubber IHT 20mm
165
389062
TSMI0112
86
578690
Sound Reduction Rubber IHT 25mm
165
389063
TSMI0125
86
580560
Pipe Expansion Slide PESMO
204
389064
TSMI0137
86
580561
Pipe Expansion Slide PESMOS
206
389065
TSMI0150
86
580562
Pipe Expansion Slide PESMT
208
389066
TSMI0162
86
580563
Pipe Expansion Slide PESMTS
210
389067
TSMI0200
86
580564
Pipe Expansion Slide PESHO
204
389068
TSMI0212
86
580565
Pipe Expansion Slide PESHOS
207
389500
Beam Clamp TK300-9mm
88
580566
Pipe Expansion Slide PESHT
209
389510
Beam Clamp TK300-11mm
88
580567
Pipe Expansion Slide PESHTS
211
389890
Beam Clamp BTK310-M10
89
582450
MACRO V ISO 200 M8/10 Circular Duct Clamp
78
400063
CADDY® SUPERFIX 243 12-14mm
2
582470
78
400064
2
582480
78
400065
2
582490
78
400066
2
582500
78
400067
2
582510
78
400068
2
582530
78
400069
2
582540
78
400070
2
582550
78
400071
2
582560
78
400072
2
582580
78
400073
2
582590
78
400074
2
582600
78
400075
2
582810
400076
2
583860
Dual Sided Screw VDF M10 x 45
166
400077
2
584500
C-Fix Channel Nut M6
138
577002
HDPC 20-24 mm
22,27
584510
138
577003
HDPC 25-30 mm
22,27
584520
138
577004
HDPC 31-35 mm
22,27
584530
C-Fix Channel Nut with Stud M8 X 30 mm
138
244
5
78
www.erico.com
11/15/07
2:14 PM
Page 245
INDEX
Part No.
Description
Page
Part No.
Description
Page
584560
C-Fix Channel Nut with Stud M10 X 40 mm
138
595560
189
588430
Sound Insulator female/female SBFF 6-6
126
595595
190
588440
Sound Insulator female/female SBFF 8-8
126
595600
190
588500
Sound Insulator Heavy Duty SGBC
126
595610
190
588560
Sound Insulator male/female SBMF 8-8
127
595620
190
588570
127
588580
127
595630
190
588610
Sound Insulator female/female SBMK
127
595640
190
588620
Sound Insulator male/female SBFK
127
595650
190
595870
3
595660
190
589980
KIT U Silent 450
128
595670
190
589990
KIT U Silent 600
128
595675
190
590076
KP T-BOLTS Premounted Stud Washer and nut M8 X 30 mm
139
595680
190
590077
KP T-BOLTS Premounted Stud Washer and nut M8 X 40 mm
139
595690
190
590080
Pre Mounted Nut TMN M8 x 30
166
595695
190
590090
Pre Mounted Nut TMN M10 x 40
166
595700
190
593180
Drop In Anchor CA6
166
595710
190
593190
Drop In Anchor CA8
166
595720
190
593200
Drop In Anchor CA10
166
595730
190
595035
CADDY® MACROFIX 240LF 14-19mm
4
595740
190
595036
4
595750
190
595037
4
595755
190
595038
4
595760
190
595039
4
595770
190
595040
4
595775
190
595041
4
595780
190
595042
4
595860
3
595043
4
595870
3
595044
4
595880
3
595045
4
595885
3
595046
4
595890
3
595047
4
595900
3
595048
4
595910
3
595400
189
595920
3
595410
189
595930
3
595420
189
595940
3
595430
189
595950
3
595440
189
595955
3
595450
189
595960
3
595470
189
595970
3
595475
189
596220
9
595480
189
596230
9
595490
189
596250
9
595500
189
596260
9
595505
189
596270
9
595510
189
596280
9
595520
189
596290
9
595530
189
596300
9
595535
189
596310
9
595540
189
596320
9
595550
189
596360
9
595555
189
596380
9
www.erico.com
245
11/15/07
2:14 PM
Page 246
INDEX
Part No.
Description
Page
Part No.
Description
Page
596410
CADDY® MACROFIX 250 NI 159-168mm
9
1050050S4
#105 Stainless Steel Loop Hanger 15nb
191
596450
3
1050075S4
191
596460
3
1050100S4
191
596470
3
1050125S4
191
596480
3
1050150S4
191
596490
3
1050200S4
191
596500
3
1050250S4
191
596510
3
1050300S4
191
597590
Duct Fixing V-Shape EQV
79
1050400S4
191
597770
Duct Fixing V-Shape EQVS
79
1050500S4
191
597780
Duct Fixing Bracket L-Shape EQLS85
80
1050600S4
191
597790
Duct Fixing Bracket Z-Shape EQZS
80
1050800S4
191
597790
Duct Fixing Bracket Z-Shape EQ-ZAB
81
1150050EG
#115 Loop 1/2" EG
25
597791
80
1150075EG
#115 Loop 3/4" EG
25
597792
80
1150100EG
#115 Loop 1" EG
25
597811
Stand-Off 2-Hole Strap CPVC 20nb SO12A
37
1150125EG
#115 Loop 1-1/4" EG
25
597812
37
1150150EG
#115 Loop 1-1/2" EG
25
597813
37
1150200EG
#115 Loop 2" EG
25
597814
37
1150250EG
#115 Loop 2-1/2" EG
25
597815
37
1150300EG
#115 Loop 3" EG
25
597816
#107 Wrap Around Strap CPVC 20nb 1070075EG
34
1150400EG
#115 Loop 4" EG
25
597817
34
1150500EG
#115 Loop 5" EG
25
597818
34
1150600EG
#115 Loop 6" EG
25
597819
34
1150800EG
#115 Loop 8" EG
25
597821
34
4060050S4
#406 Clevis Hanger 15nb 304 SS
192
597822
#108 Two-Hole Strap CPVC 20nb 1080075EG
35
4060075S4
192
597823
35
4060100S4
192
597824
35
4060125S4
192
597825
35
4060150S4
192
597826
35
4060200S4
192
597827
#109 Side Mount Strap CPVC 20nb 1090075EG
36
4060250S4
192
597828
36
4060300S4
192
597829
36
4060400S4
192
597831
36
4060500S4
192
597832
36
4060600S4
192
597860
#115M Loop 15mm EG 115M0050EG
25
4060800S4
192
597870
25
4061000S4
192
597880
25
4061200S4
192
597890
25
4061600S4
192
597900
25
4061800S4
192
597910
25
4062000S4
192
597920
25
4062400S4
192
597930
25
6100250PL
#610 One Rod Roller 65nb PL
202
597940
25
6100300PL
202
597950
25
6100400PL
202
597960
25
6100500PL
202
597970
25
6100600PL
202
598501
Beam Clamp BTK310-11mm
89
6100800PL
202
598502
Beam Clamp BTK310-13mm
89
6101000PL
202
599879
EOL Cantileaver Light Duty 180 mm
137
6101200PL
202
599880
EOL Cantileaver Light Duty 300 mm
137
6101400PL
202
599996
EOL C Light duty Profile
136
6101600PL
202
246
www.erico.com
11/15/07
2:15 PM
Page 247
INDEX
Part No.
Description
Page
Part No.
Description
Page
6101800PL
202
ADJ-080-PPVC-PPC
Adjustable Clamp, 80 Pressure PVC PPC
10
6102000PL
202
ADJ-080-PVC-HDG
Adjustable Clamp, 80 PVC HDG
12
6102400PL
202
ADJ-080-PVC-PPC
Adjustable Clamp, 80 PVC PPC
12
6150250PL
#615 Roller Chair 65nb PL
203
ADJ-090-PVC-HDG
12
6150300PL
203
ADJ-100-CU-HDG
Adjustable Clamp, 100 Copper HDG
11
6150400PL
203
ADJ-100-CU-PPC
Adjustable Clamp, 100 Copper PPC
11
6150500PL
203
ADJ-100-GWIR-HDG
Adjustable Clamp, 100 Steel HDG
10
6150600PL
203
ADJ-100-PPVC-PPC
10
6150800PL
203
ADJ-100-PVC-HDG
12
6151000PL
203
ADJ-100-PVC-PPC
12
6151200PL
203
ADJ-125-CU-HDG
11
6151400PL
203
ADJ-125-CU-PPC
11
6151600PL
203
ADJ-125-GWIR-HDG
10
6151800PL
203
ADJ-150-CU-HDG
11
6152000PL
203
ADJ-150-CU-PPC
11
6152400PL
203
ADJ-150-GWIR-HDG
10
AB1111
Angle bracket 11-11
167
ADJ-150-PVC-HDG
12
AB711
Angle bracket 7-11
167
ADJ-150-PVC-PPC
12
AB77
Angle bracket 7-7
167
ADJ-200-CU-HDG
11
AB97
Angle bracket 7-9
167
ADJ-225-PVC-HDG
12
ADJ-015-GWIR-HDG
10
ADJ-225-PVC-PPC
12
ADJ-015-PPVC-PPC
10
ADJ-250-CU-HDG
11
ADJ-020-CU-HDG
11
ADJ-300-CU-HDG
11
ADJ-020-CU-PPC
11
ADJ-300-PVC-HDG
12
ADJ-020-GWIR-HDG
10
ADJ-300-PVC-PPC
ADJ-025-CU-HDG
11
Barrnog
Adjustable Nogging Bracket
178
ADJ-025-CU-PPC
11
BOL-M1020-HDG
Bolt, M10x20 HDG
167
ADJ-025-GWIR-HDG
10
BOL-M1030-HDG
Bolt, M10x30 HDG
167
ADJ-025-PPVC-PPC
10
BOL-M1040-HDG
Bolt, M10x40 HDG
167
ADJ-032-CU-HDG
11
BOL-M625-HDG
Bolt, M6x25 HDG
167
ADJ-032-CU-PPC
11
BOL-M820-HDG
Bolt, M8x20 HDG
167
ADJ-032-GWIR-HDG
10
BOL-M825-HDG
Bolt, M8x25 HDG
167
ADJ-032-PPVC-PPC
10
BOL-M830-HDG
Bolt, M8x30 HDG
167
ADJ-040-CU-HDG
11
BOL-M840-HDG
Bolt, M8x40 HDG
167
ADJ-040-CU-PPC
11
BRC-015-CU-PPC
Bracket Clip, 15 Copper PPC
64
ADJ-040-GWIR-HDG
10
BRC-020-CU-PPC
64
ADJ-040-PVC-HDG
12
BRC-025-CU-PPC
64
ADJ-040-PVC-PPC
12
BRC-032-CU-PPC
64
ADJ-050-CU-HDG
11
BRC-040-CU-PPC
64
ADJ-050-CU-PPC
11
BRC-050-CU-PPC
64
ADJ-050-GWIR-HDG
10
BRC-065-CU-PPC
64
ADJ-050-PPVC-PPC
10
BRC-080-CU-PPC
64
ADJ-050-PVC-HDG
12
BRC-100-CU-PPC
64
ADJ-050-PVC-PPC
12
CDS 25
Deep Saddle, Steel 25nb EG
31
ADJ-065-CU-HDG
11
CDS 32
31
ADJ-065-CU-PPC
11
CDS 40
31
ADJ-065-GWIR-HDG
10
CDS 50
31
ADJ-065-PVC-HDG
12
CHC-015-CU-GAL
Channel Clip, 15 Copper GAL
50
ADJ-065-PVC-PPC
12
CHC-015-CU-HDG
Channel Clip, 15 Copper HDG
50
ADJ-080-CU-HDG
11
CHC-015-CU-PPC
Channel Clip, 15 Copper PPC
50
ADJ-080-CU-PPC
11
CHC-015-CU-SS
Channel Clip, 15 Copper/SS Tube 316 SS
ADJ-080-GWIR-HDG
10
CHC-015-GWIR-GAL
Channel Clip, 15 Steel GAL
www.erico.com
247
12
185
51
11/15/07
2:15 PM
Page 248
INDEX
Part No.
Description
Page
Part No.
Description
Page
50
CHC-015-GWIR-HDG
Channel Clip, 15 Steel HDG
51
CHC-065-CU-HDG
CHC-015-PPVC-PPC
Channel Clip, 15 Pressure PVC PPC
53
CHC-065-CU-PPC
CHC-016-CU-GAL
50
CHC-065-CU-SS
CHC-016-CU-HDG
50
CHC-065-GWIR-GAL
51
CHC-020-CU-GAL
50
CHC-065-GWIR-HDG
51
CHC-020-CU-HDG
50
CHC-065-PPVC-PPC
53
CHC-020-CU-PPC
50
CHC-065-PVC-GAL
Channel Clip, 65 PVC GAL
52
CHC-020-CU-SS
185
CHC-065-PVC-HDG
Channel Clip, 65 PVC HDG
52
CHC-020-GWIR-GAL
51
CHC-065-PVC-PPC
Channel Clip, 65 PVC PPC
CHC-020-GWIR-HDG
51
CHC-065-PVC-SS
Channel Clip, 65 PVC 316 SS
186
CHC-020-PPVC-PPC
53
CHC-080-CU-GAL
50
CHC-023-CU-GAL
50
CHC-080-CU-HDG
50
CHC-025-CU-GAL
50
CHC-080-CU-PPC
CHC-025-CU-HDG
50
CHC-080-CU-SS
CHC-025-CU-PPC
CHC-025-CU-SS
CHC-025-GWIR-GAL
50
185
52
50
185
50
CHC-080-GWIR-GAL
51
185
CHC-080-GWIR-HDG
51
51
CHC-080-PPVC-PPC
53
CHC-025-GWIR-HDG
51
CHC-080-PVC-GAL
52
CHC-025-PPVC-PPC
53
CHC-080-PVC-HDG
52
CHC-029-CU-GAL
50
CHC-080-PVC-PPC
CHC-029-CU-HDG
50
CHC-080-PVC-SS
CHC-032-CU-GAL
50
CHC-090-PVC-GAL
52
CHC-032-CU-HDG
50
CHC-090-PVC-HDG
52
CHC-032-CU-PPC
50
CHC-090-PVC-PPC
52
CHC-032-CU-SS
185
CHC-090-PVC-SS
CHC-032-GWIR-GAL
51
CHC-100-CU-GAL
50
CHC-032-GWIR-HDG
51
CHC-100-CU-HDG
50
CHC-032-PPVC-PPC
53
CHC-100-CU-PPC
CHC-035-CU-GAL
50
CHC-100-CU-SS
CHC-040-CU-GAL
50
CHC-100-GWIR-GAL
51
CHC-040-CU-HDG
50
CHC-100-GWIR-HDG
51
CHC-040-CU-PPC
50
CHC-100-PPVC-PPC
53
CHC-040-CU-SS
185
CHC-100-PVC-GAL
52
CHC-040-GWIR-GAL
51
CHC-100-PVC-HDG
52
CHC-040-GWIR-HDG
51
CHC-100-PVC-PPC
CHC-040-PPVC-PPC
53
CHC-100-PVC-SS
186
CHC-040-PVC-GAL
52
CHC-125-CU-GAL
50
CHC-040-PVC-HDG
52
CHC-125-CU-HDG
50
CHC-040-PVC-PPC
52
CHC-125-CU-PPC
CHC-040-PVC-SS
186
CHC-125-CU-SS
CHC-050-CU-GAL
50
CHC-125-GWIR-GAL
51
CHC-050-CU-HDG
50
CHC-125-GWIR-HDG
51
CHC-050-CU-PPC
50
CHC-150-CU-GAL
50
CHC-050-CU-SS
185
CHC-150-CU-HDG
50
CHC-050-GWIR-GAL
51
CHC-150-CU-PPC
CHC-050-GWIR-HDG
51
CHC-150-CU-SS
CHC-050-PPVC-PPC
53
CHC-150-GWIR-GAL
51
CHC-050-PVC-GAL
52
CHC-150-GWIR-HDG
51
CHC-050-PVC-HDG
52
CHC-150-PVC-GAL
52
CHC-050-PVC-PPC
52
CHC-150-PVC-HDG
52
CHC-050-PVC-SS
186
CHC-150-PVC-PPC
CHC-065-CU-GAL
50
CHC-150-PVC-SS
248
52
186
186
50
185
52
50
185
50
185
52
186
www.erico.com
11/15/07
2:15 PM
Page 249
INDEX
Part No.
Description
Page
Part No.
Description
Page
CHC-200-CU-GAL
50
COU-M20-ZP
Threaded Rod Coupler, M20 EG
168
CHC-200-CU-HDG
50
COU-M8-ZP
168
CHC-200-CU-PPC
50
CTC 25
Twist Clip, Steel 25nb EG
32
CHC-200-CU-SS
185
CTC 32
32
CHC-200-GWIR-GAL
51
CTC 40
32
CHC-200-GWIR-HDG
51
CTC 50
32
CHC-200-PPVC-GAL
53
CTC 65
32
CHC-225-CU-GAL
50
CU-HF-015-PPC
Half Saddle Clip, 15 Copper PPC
65
CHC-225-CU-HDG
50
CU-HF-020-PPC
Half Saddle Clip, 20 Copper PPC
65
CHC-225-PVC-GAL
52
CUS-006-CU-PPC
Copper Saddle, 6mm PPC
66
CHC-225-PVC-HDG
52
CUS-008-CU-PPC
66
CHC-225-PVC-PPC
52
CUS-010-CU-PPC
66
CHC-225-PVC-SS
186
CUS-012-CU-PPC
66
CHC-250-CU-GAL
50
CUS-016-CU-PPC
66
CHC-250-CU-HDG
50
CUS-020-CU-PPC
66
CHC-250-GWIR-GAL
51
CUS-025-CU-PPC
66
CHC-250-GWIR-HDG
51
CUS-032-CU-PPC
66
CHC-250-PPVC-GAL
53
CUS-040-CU-PPC
66
CHC-300-CU-GAL
50
CUS-050-CU-PPC
66
CHC-300-CU-HDG
50
CU-SAD-006
Solid Copper Saddle, 6mm
65
CHC-300-PVC-GAL
52
CU-SAD-008
65
CHC-300-PVC-HDG
52
CU-SAD-010
65
CHC-300-PVC-PPC
52
CU-SAD-015
65
CHC-375-PVC-GAL
52
CU-SAD-016
65
CHC-375-PVC-HDG
52
CU-SAD-020
65
CHC-375-PVC-PPC
52
CU-SAD-025
CLS 25
Shallow Saddle, Steel 25nb EG
31
D1M10
D1 Purlin Clip, M10 rod
169
CLS 32
31
D1M12
169
CLS 40
31
D1M8
169
CLS 50
31
E210
E2 Purlin Clip, M10
170
CLS 65
31
E212
E2 Purlin Clip, M12
170
CMP10
CADDY Mounting Plate, M10
168
E28
E2 Purlin Clip, M8
170
CMP12
168
EA3030
ERICO Slotted Angle, 30mm x 30mm EG
145
CMP8
168
EA5050
ERICO Slotted Angle, 50mm x 50mm EG
145
CNC 100
Nut Clip, Steel 100nb EG
26
ECB150
Braced Cantilever Arms, 320mm
146
CNC 100 M12
Nut Clip, Steel 100nb M12 EG
26
ECB300
146
CNC 125
26
ECB450
146
CNC 125 M12
26
ECB600
146
CNC 150
26
EPB 114
Pear Bands, Steel, 100nb EG
24
CNC 150 M12
26
EPB 165
24
CNC 20
26
EPB 220
24
CNC 25
26
EPB 27
24
CNC 32
26
EPB 34
24
CNC 40
26
EPB 43
24
CNC 50
26
EPB 48
24
CNC 65
26
EPB 60
24
CNC 65 M12
26
EPB 76
24
CNC 80
26
EPB 89
CNC 80 M12
26
ERC02510
ERICO Rod Connector, adj, M10
170
COU-M10-ZP
168
ERC1010
ERICO Rod Connector, M10
170
COU-M12-ZP
168
ERIC 10
ERIC Clevis, M10
171
COU-M16-ZP
168
ERIC 12
ERIC Clevis, M12
171
www.erico.com
249
65
24
11/15/07
2:15 PM
Page 250
INDEX
Part No.
Description
Page
Part No.
Description
Page
ERIC 16
ERIC Clevis, M16
171
ES3300T
CADDY ERISTRUT, 41 X 21 X 2.5mm Slotted HDG (3M)
144
ERIC 8
ERIC Clevis, M8
171
ES4121PLX6
CADDY ERISTRUT, 41 X 21 X 2.5mm HDG (6M)
144
ERIC1-34
ERIC1 Saddle, 25 Steel EG
32
ES4121SLOTX6
144
ERIC1-43
32
ES4141PLX6
144
ERIC1-48
32
ES4141SLOTX6
144
ERIC15 - 114
Medium Duty Saddle Clamp, Steel 100nb HDG
56
ESA0850
Strike Anchor, M8
171
ERIC15 - 165
56
ESA1050
Strike Anchor, M10
171
ERIC15 - 219
56
ESGP
Metal Stud Anti-Rattle Grommet
177
ERIC15 - 60
56
FER-0100-25-PLY
Plywood Ferrule, 100 Copper 25mm Wall
172
ERIC15 - 76
56
FER-0100-38-PLY
172
ERIC15 - 89
56
FER-0100-50-PLY
172
ERIC16 - 102
Medium Duty 2 pc Clamp, Copper 100mm HDG
57
FER-0125-25-PLY
172
ERIC16 - 114
Medium Duty 2 pc Clamp, Steel 100nb HDG
57
FER-0125-50-PLY
172
ERIC16 - 127
57
FER-0150-25-PLY
172
ERIC16 - 140
57
FER-0150-38-PLY
172
ERIC16 - 152
57
FER-0150-50-PLY
172
ERIC16 - 165
57
FER-015-12-PLY
172
ERIC16 - 220
57
FER-015-25-PLY
172
ERIC16 - 273
57
FER-015-38-PLY
172
ERIC16 - 324
57
FER-015-50-PLY
172
ERIC16 - 60
57
FER-0200-25-PLY
172
ERIC16 - 76
57
FER-0200-38-PLY
172
ERIC16 - 89
57
FER-0200-50-PLY
172
ERIC18 - 114
Adjustable Clamp, Steel 100nb HDG
58
FER-020-12-PLY
172
ERIC18 - 127
Adjustable Clamp, Copper 125mm HDG
58
FER-020-25-PLY
172
ERIC18 - 152
Adjustable Clamp, Copper 150mm HDG
58
FER-020-38-PLY
172
ERIC18 - 165
58
FER-020-50-PLY
172
ERIC18 - 219
58
FER-025-12-PLY
172
ERIC18 - 273
58
FER-025-25-PLY
172
ERIC18 - 60
58
FER-025-38-PLY
172
ERIC18 - 76
58
FER-025-50-PLY
172
ERIC18 - 89
58
FER-032-12-PLY
172
ERIC30 - 168
Heavy Duty Saddle Clamp, Steel 150mm HDG
60
FER-032-25-PLY
172
ERIC30 - 219
60
FER-032-38-PLY
172
ERIC30 - 273
60
FER-040-12-PLY
172
ERIC30 - 324
60
FER-040-25-PLY
172
ERIC30 - 356
60
FER-040-38-PLY
172
ERIC30 - 406
60
FER-040-50-PLY
172
ERIC30 - 457
60
FER-050-12-PLY
172
ERIC30 - 508
60
FER-050-25-PLY
172
ERIC31 - 168
Heavy Duty 2 pc Clamp, Steel 150mm HDG
61
FER-050-38-PLY
172
ERIC31 - 219
61
FER-050-50-PLY
172
ERIC31 - 273
61
FER-065-12-PLY
172
ERIC31 - 324
61
FER-065-25-PLY
172
ERIC31 - 356
61
FER-065-38-PLY
172
ERIC31 - 406
61
FER-065-50-PLY
172
ERIC31 - 457
61
FER-080-12-PLY
172
ERIC31 - 508
61
FER-080-25-PLY
172
ERIC31 - 610
61
FER-080-38-PLY
172
ES1000
CADDY® ERISTRUT, 41 X 41 X 2.5mm HDG (3M)
159
FER-080-50-PLY
172
ES1000T
144
FFC-040-PVC-PPC
Flush Fitting Clip 40 PVC PPC
67
ES3300
144
FFC-050-PVC-PPC
67
250
www.erico.com
11/15/07
2:15 PM
Page 251
INDEX
Part No.
Description
Page
Part No.
Description
Page
FFC-065-PVC-PPC
67
NUT-065-CU-PPC
Nut Clip, 65 Copper PPC
13
FFC-075-PVC-PPC
67
NUT-065-PVC-PPC
Nut Clip, 65 PVC PPC
14
FFC-080-PVC-PPC
67
NUT-080-CU-PPC
13
FFC-090-PVC-PPC
67
NUT-080-PVC-PPC
14
FFC-100-PVC-PPC
67
NUT-090-PVC-PPC
14
HEX-M10-HDG
Hex Nut, M10 HDG
173
NUT-100-CU-PPC
13
HEX-M10-SS
Hex Nut, M10 316 SS
173
NUT-100-PVC-PPC
14
HEX-M10-ZP
Hex Nut, M10 EG
173
NUT-125-CU-PPC
13
HEX-M12-HDG
Hex Nut, M12 HDG
173
NUT-150-CU-PPC
13
HEX-M12-SS
Hex Nut, M12 316 SS
173
NUT-150-PVC-PPC
14
HEX-M12-ZP
Hex Nut, M12 EG
173
P110000HD
P11 Strut Post Bast
161
HEX-M16-HDG
Hex Nut, M16 HDG
173
P130000HD
P13 Strut Post Base for Welded Strut
162
HEX-M16-SS
Hex Nut, M16 316 SS
173
PNG-040-PVC-PPC
Pear Band, 40 PVC PPC
14
HEX-M16-ZP
Hex Nut, M16 EG
173
PNG-050-PVC-PPC
14
HEX-M20-HDG
Hex Nut, M20 HDG
173
PNG-065-PVC-PPC
14
HEX-M20-SS
Hex Nut, M20 316 SS
173
PNG-080-PVC-PPC
14
HEX-M20-ZP
Hex Nut, M20 EG
173
PNG-100-PVC-PPC
14
HEX-M6-HDG
Hex Nut, M6 HDG
173
PNG-150-PVC-PPC
14
HEX-M6-SS
Hex Nut, M6 316 SS
173
PNG-225-PVC-PPC
14
HEX-M6-ZP
Hex Nut, M6 EG
173
PNG-300-PVC-PPC
14
HEX-M8-HDG
Hex Nut, M8 HDG
173
RIGD0050EG
Strut Clamp for Rigid Pipe 15mm
48
HEX-M8-SS
Hex Nut, M8 316 SS
173
RIGD0075EG
48
HEX-M8-ZP
Hex Nut, M8 EG
173
RIGD0100EG
48
HNG-040-PVC-PPC
Hanging Bracket 40 PVC PPC
69
RIGD0125EG
48
HNG-050-PVC-PPC
69
RIGD0150EG
48
HNG-065-PVC-PPC
69
RIGD0200EG
48
HNG-080-PVC-PPC
69
RIGD0250EG
48
HNG-090-PVC-PPC
69
RIGD0300EG
48
HNG-100-PVC-PPC
69
RIGD0400EG
HNG-150-PVC-PPC
69
ROD-M10X3-HDG
Threaded Rod, M10 x 3m HDG
174
HST-GAL-300
Hanging Strap, 300mm EG
70
ROD-M10X3-ZP
Threaded Rod, M10 x 3m EG
174
HST-GAL-600
Hanging Strap, 600mm EG
70
ROD-M12X3-HDG
174
KH10C
KH Cantilever Arm, 150mm HDG
145
ROD-M12X3-ZP
174
KH11C
145
ROD-M16X3-HDG
174
KH12C
145
ROD-M16X3-ZP
174
KH13C
145
ROD-M20X3-HDG
174
KH14C
145
ROD-M20X3-ZP
174
KH15C
145
ROD-M6X3-HDG
174
KH16C
145
ROD-M6X3-ZP
174
KH5C
145
ROD-M8X3-HDG
174
KH6C
145
ROD-M8X3-ZP
174
KH8C
145
ROL10000EG
ROL10 Strut Trolley
162
KH9C
145
ROL110000EG
ROL11 Double Strut Trolley
162
MSP20
Metal Stud Punch
178
ROL12000EG
ROL12 25nb to 100nb pipe
198
NUT-015-CU-PPC
13
ROL13034EG
ROLLER,SINGLE,3-1/8 -100nb pipe
198
NUT-020-CU-PPC
13
ROL13046EG
198
NUT-025-CU-PPC
13
ROL13068EG
198
NUT-032-CU-PPC
13
ROL14000EG
ROLLER,SINGLE, 150nb to 400nb pipe
200
NUT-040-CU-PPC
13
ROL15000EG
ROLLER,SINGLE,400nb to 620nb pipe,E-GAL
201
NUT-040-PVC-PPC
14
RUB-FLAT
Rubber Insulation, Flat
174
NUT-050-CU-PPC
13
RUB-LIP
Rubber Insulation, for Strut Lip
174
NUT-050-PVC-PPC
14
SAD-015-CU-PPC
Saddle, 15 Copper PPC
www.erico.com
251
48
15
11/15/07
2:15 PM
Page 252
INDEX
Part No.
Description
Page
Part No.
SAD-020-CU-PPC
15
SOB-080-PVC-PPC
Stand Off Bracket, 80 PVC PPC
18
SAD-020-GWIR-HDG
Saddle, 20 Steel HDG
16
SOB-090-PVC-PPC
18
SAD-025-CU-PPC
15
SOB-100-CU-PPC
Stand Off Bracket, 100 Copper PPC
18
SAD-025-GWIR-HDG
16
SOB-100-PVC-PPC
18
SAD-032-CU-PPC
15
SOB-125-CU-PPC
18
SAD-032-GWIR-HDG
16
SOB-150-CU-PPC
18
SAD-040-CU-PPC
15
SOB-150-PVC-PPC
18
SAD-040-GWIR-HDG
16
SOB-225-PVC-PPC
18
SAD-040-PVC-PPC
Saddle, 40 PVC PPC
17
SOB-300-PVC-PPC
18
SAD-050-CU-PPC
15
SOW-040-PVC-PPC
Stand Off Wall Bracket, 40 PVC PPC
70
SAD-050-GWIR-HDG
16
SOW-050-PVC-PPC
70
SAD-050-PVC-PPC
Saddle, 50 PVC PPC
17
SOW-065-PVC-PPC
70
SAD-065-CU-PPC
15
SOW-080-PVC-PPC
70
SAD-065-GWIR-HDG
16
SOW-090-PVC-PPC
70
SAD-065-PVC-PPC
Saddle, 65 PVC PPC
17
SOW-100-PVC-PPC
70
SAD-080-CU-PPC
15
SPC-015-CU-PPC
Single Piece Clip, 15 Copper PPC
SAD-080-GWIR-HDG
16
SPC-015-CU-SS
Single Piece Clip, 15 Copper/SS 316 SS
187
SAD-080-PVC-PPC
Saddle, 80 PVC PPC
17
SPC-015-PPVC-PPC
Single Piece Clip, 15 Pressure PVC PPC
73
SAD-090-PVC-PPC
Saddle, 90 PVC PPC
17
SPC-020-CU-PPC
SAD-100-CU-PPC
15
SPC-020-CU-SS
187
SAD-100-GWIR-HDG
16
SPC-020-PPVC-PPC
73
SAD-100-PVC-PPC
Saddle, 100 PVC PPC
17
SPC-025-CU-PPC
SAD-150-CU-PPC
15
SPC-025-CU-SS
187
SAD-150-GWIR-HDG
16
SPC-025-PPVC-PPC
73
SAD-150-PVC-PPC
Saddle, 150 PVC PPC
17
SPC-032-CU-PPC
SAD-200-GWIR-HDG
16
SPC-032-CU-SS
187
SAD-225-PVC-PPC
Saddle, 225 PVC PPC
17
SPC-032-PPVC-PPC
73
SAD-250-GWIR-HDG
16
SPC-040-CU-PPC
SAD-300-PVC-PPC
Saddle, 300 PVC PPC
17
SPC-040-CU-SS
187
SET-M1020-SS
Set Screw M10 x 20 316 SS
175
SPC-040-PPVC-PPC
73
SET-M1020-ZP
Set Screw M10 x 20 EG
175
SPC-040-PVC-PPC
Single Piece Clip, 40 PVC PPC
72
SET-M1030-SS
175
SPC-050-CU-PPC
SET-M1030-ZP
175
SPC-050-CU-SS
187
SET-M1040-SS
175
SPC-050-PPVC-PPC
73
SET-M1040-ZP
175
SPC-050-PVC-PPC
72
SET-M625-SS
175
SPC-065-CU-PPC
SET-M625-ZP
175
SPC-065-CU-SS
187
SET-M820-SS
175
SPC-065-PPVC-PPC
73
SET-M820-ZP
175
SPC-065-PVC-PPC
72
SET-M825-SS
175
SPC-080-CU-PPC
71
SET-M825-ZP
175
SPC-080-PVC-PPC
72
SET-M830-SS
175
SPC-090-PVC-PPC
72
SET-M830-ZP
175
SPC-100-CU-PPC
SET-M840-SS
175
SPC-100-CU-SS
187
SET-M840-ZP
175
SPC-100-PPVC-PPC
73
SOB-040-CU-PPC
18
SPC-100-PVC-PPC
72
SOB-040-PVC-PPC
18
SPC-125-CU-PPC
SOB-050-CU-PPC
18
SPC-125-CU-SS
SOB-050-PVC-PPC
18
SPC-150-CU-PPC
71
SOB-065-CU-PPC
18
SPC-150-PVC-PPC
72
SOB-065-PVC-PPC
18
SPH-040-PVC-PPC
Single Piece Hanger, 40 PVC PPC
68
SOB-080-CU-PPC
18
SPH-050-PVC-PPC
68
252
Description
Page
71
71
71
71
71
71
71
71
71
187
www.erico.com
11/15/07
2:15 PM
Page 253
INDEX
Part No.
Description
Page
Part No.
Description
Page
SPH-065-PVC-PPC
68
TP225100EG
TP225 25nb Quick End Brace
215
SPH-080-PVC-PPC
68
TP225125EG
TP225 32nb Quick End Brace
215
SPH-090-PVC-PPC
68
TP225A000EG
TP225A Adapter Plate
215
SPH-100-PVC-PPC
68
TP225G100EG
TP225G 25nb Brace Fitting, Heavy Duty
215
SQ-38M10-ZP
Square Washer, M10 EG
175
TP225G125EG
TP225G 32nb Brace Fitting, Heavy Duty
215
SQ-38M12-ZP
175
TP2301000100PL
TP230 25nb x 25nb Long Sway Brace
216
SQ-38M16-ZP
175
TP2301000125PL
TP230 25nb x 32nb Lat & Longitudinal Sway Brace
216
SUR-M6
Suredrive Anchor, M6 EG
176
TP2301000150PL
216
TCC0025CP
Tube Cushion Clamp 6.35mm
49
TP2301000200PL
TP230 25nb x50nb Lat & Longitudinal Sway Brace
216
TCC0037CP
Tube Cushion Clamp 10mm
49
TP2301000250PL
216
TCC0050CP
49
TP2301000300PL
216
TCC0062CP
49
TP2301000400PL
216
TCC0075CP
49
TP2301000500PL
216
TCC0087CP
49
TP2301000600PL
216
TCC0100CP
Tube Cushion Clamp 25.4m
49
TP2301000800PL
216
TCC0112CP
49
TP2301250125PL
216
TCC0125CP
49
TP2301250150PL
216
TCC0137CP
49
TP2301250200PL
TP230 32nb x50nb Lat & Longitudinal Sway Brace
216
TCC0150CP
49
TP2301250250PL
216
TCC0162CP
49
TP2301250300PL
216
TCC0175CP
49
TP2301250400PL
216
TCC0187CP
49
TP2301250500PL
216
TCC0200CP
Tube Cushion Clamp51mm
49
TP2301250600PL
216
TCC0212CP
49
TP2301250800PL
216
TCC0250CP
49
TP230G1000600PL
TP230G 25nb x 150nb Lat & Longitudinal Sway Brace, Heavy Duty
216
TCC0262CP
49
TP230G1000800PL
216
TCC0300CP
49
TP230G1250600PL
216
TCC0312CP
49
TP230G1250800PL
216
TCC0331CP
49
TP235100EG
TP235 25nb Quick Tab Brace Welded
217
TCC0362CP
49
TP235125EG
TP235 32nb Quick Tab Brace Welded
217
TCC0400CP
49
TP2401000100EG
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1 Inch EG
217
TCC0412CP
49
TP2401000100PL
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1 Inch Plain
217
TCC0512CP
49
TP2401250125EG
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1-1/4 Inch EG
217
TCC0612CP
49
TP2401250125PL
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1-1/4 Inch Plain
217
TP2201000125EG
TP220 25nb x 32nb Lateral Sway Brace
210
TP2800100EG
TP280 Threaded Brace Fitting, Style AB
218
TP2201000150EG
210
TP280P0100EG
TP280 Threaded Brace Fitting, Style A
218
TP2201000200EG
TP220 25nb x50nb Lateral Sway Brace
210
TPC-015-GWIR-HDG
Two Piece Clip, 15 Steel HDG
20
TP2201000250EG
210
TPC-020-CU-PPC
Two Piece Clip, 20 Copper PPC
19
TP2201000300EG
210
TPC-020-GWIR-HDG
20
TP2201000400EG
210
TPC-020-PPVC-PPC
Two Piece Clip, 20 Pressure-PVC PPC
21
TP2201000500EG
210
TPC-025-CU-PPC
19
TP2201000600EG
210
TPC-025-GWIR-HDG
20
TP2201000800EG
210
TPC-025-PPVC-PPC
21
TP2201250125EG
210
TPC-032-CU-PPC
19
TP2201250150EG
210
TPC-032-GWIR-HDG
20
TP2201250200EG
TP220 32nb x50nb Lateral Sway Brace
210
TPC-032-PPVC-PPC
21
TP2201250250EG
210
TPC-040-CU-PPC
19
TP2201250300EG
210
TPC-040-GWIR-HDG
20
TP2201250400EG
210
TPC-040-PPVC-PPC
21
TP2201250500EG
210
TPC-040-PVC-PPC
Two Piece Clip, 40-PVC PPC
21
TP2201250600EG
210
TPC-050-CU-PPC
19
TP2201250800EG
210
TPC-050-GWIR-HDG
20
www.erico.com
253
11/15/07
2:15 PM
Page 254
INDEX
Part No.
Description
Page
Part No.
Description
Page
TPC-050-PPVC-PPC
21
WB-ADJ-GAL
Adjustable Wall Bracket, 47mm EG
75
TPC-050-PVC-PPC
21
WB-ADJ-PPC
Adjustable Wall Bracket, 20mm PPC
74
TPC-065-CU-PPC
19
WB-GAL
Adjustable Wall Bracket, 20mm EG
TPC-065-GWIR-HDG
20
WB-SS CUP
Wall Bracket, adj, Cup Screw SS
188
TPC-065-PVC-PPC
21
WB-SS SET
Wall Bracket, adj, Set Screw SS
188
TPC-080-CU-PPC
19
TPC-080-GWIR-HDG
20
TPC-080-PPVC-PPC
21
TPC-080-PVC-PPC
21
TPC-100-CU-PPC
19
TPC-100-GWIR-HDG
20
TPC-100-PPVC-PPC
21
TPC-100-PVC-PPC
21
TPC-125-CU-PPC
19
TPC-125-GWIR-HDG
20
TPC-150-CU-PPC
19
TPC-150-GWIR-HDG
20
TPC-150-PVC-PPC
21
TPC-200-CU-PPC
19
TPC-225-FRC-HDG
Two Piece Clip, 225 FRC HDG
21
TPC-225-PVC-HDG
Two Piece Clip, 225 PVC HDG
21
TPC-225-PVC-PPC
21
TPC-250-CU-HDG
Two Piece Clip, 250 Copper HDG
19
TPC-300-CU-HDG
Two Piece Clip, 300 Copper HDG
19
TPC-300-FRC-HDG
22
TPC-300-PVC-HDG
21
TPC-300-PVC-PPC
21
TPC-375-FRC-HDG
22
TPC-375-PVC-HDG
21
TPC-450-FRC-HDG
22
UBOLT-M10X25
U-Bolt c/w Nut, M10 x 25 HDG
33
UBOLT-M10X32
33
UBOLT-M10X40
33
UBOLT-M10X50
33
UBOLT-M12X100
33
UBOLT-M12X150
33
UBOLT-M12X200
33
UBOLT-M12X65
33
UBOLT-M12X80
33
UBOLT-M6X32
U-Bolt c/w Nut, M6 x 32 EG
33
UBOLT-M6X40
33
UBOLT-M6X50
33
VMP10
Vertical Mounting Plate M10
176
VMP12
176
VMP8
176
WAS-M10-ZP
Flat Washer, 10mm EG
177
WAS-M12-ZP
177
WAS-M16-ZP
177
WAS-M20-ZP
177
WAS-M6-ZP
Flat Washer, 6mm EG
177
WAS-M8-ZP
Flat Washer, 8mm EG
177
254
74
www.erico.com
11/15/07
www.erico.com
2:15 PM
255
Page 255
11/15/07
3:00 PM
Page 256
www.erico.com
AUSTRALIA
CHINA
HUNGARY
NORWAY
SWITZERLAND
Phone 61-2-9751-8500
Fax 61-2-9475-5334
Phone 86-21-3430-4878
Fax 86-21-5831-8177
Phone 31-13-58-35-415
Fax 31-13-58-35-499
Phone 47-67-53-12-00
Fax 47-67-12-42-68
Phone 00-800-5000-1090
Fax 00-800-6000-1090
BELGIUM
DENMARK
INDONESIA
POLAND
Phone 46-40-611-13-60
Fax 46-40-611-9415
THAILAND
Phone 32-14-69-96-88
Fax 32-14-69-96-90
Phone 62-21-575-0941
Fax 62-21-575-0942
Phone 48-71-374-40-22
Fax 48-71-374-40-43
Phone 66-2-267-5776
Fax 66-2-636-6988
BRAZIL
UNITED ARAB
EMIRATES
FRANCE
ITALY
SINGAPORE
Phone 55-11-3623-4333
Fax 55-11-3621-4066
Phone 33-4-77-36-54-32
Fax 33-4-77-55-20-10
Phone 39-02-8474-2250
Fax 39-02-8474-2251
Phone 65-6-268-3433
Fax 65-6-268-1389
CANADA
GERMANY
MEXICO
SPAIN
UNITED KINGDOM
Phone 1-800-677-9089
Fax 1-800-677-8131
Phone 0-800-189-0272
Fax 0-800-189-0274
Phone 52-55-5260-5991
Fax 52-55-5260-3310
Phone 34-93-467-7726
Fax 34-93-467-7725
Phone 44-118-958-8386
Fax 44-118-955-0925
CHILE
HONG KONG
NETHERLANDS
SWEDEN
Phone 852-2764-8808
Fax 852-2764-4486
Phone 31-13-58-35-400
Fax 31-13-58-35-499
Phone 46-40-611-13-60
Fax 46-40-611-94-15
UNITED STATES
Phone 56-2-370-2908
Fax 56-2-370-2914
Copyright ©2007 ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
Phone 971-4-881-7250
Fax 971-4-881-7270
Phone 1-440-248-0100
Fax 1-440-248-0723
M738C-ENAU
M710CT06ENAU
0116M7

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog

Transcription

Similar documents

CONSTRUCTION SUPPORT SYSTEMS