JS Excavator Attachments Guide
Transcription
JS Excavator Attachments Guide
JS Excavator Attachments Guide ATTACHMENTS Introduction Contents Our Range Buckets ................................................................................................... 4 - 10 The following guide details our full range of excavator attachments. For further information on this range or any of our other ranges please Quickhitch .................................................................................................... 11 contact the team at JCB Attachments. Our contact details can be found on the back page. Selector Grabs .............................................................................................. 12 Why Choose JCB? JCB’s machines are universally recognised for their quality, productivity and innovation. Each attachment in our range has been extensively tested and approved by our engineers and is the perfect partner for your machine. Rock Wheel .................................................................................................. 13 Hammermaster Breakers ..................................................................... 14 - 15 You can be assured of reliability and efficiency. We have some of the best availability in the industry and can quickly respond to your requirements. When you use a JCB Attachment with a JCB machine you are using the ultimate complete package. Both the machine and the attachment have Multiprocessor - Cutter Crusher ................................................................ 16 Crushing & Screening Equipment ............................................................... 17 full JCB backup and support with a team of dedicated engineers, service technicians and customer service advisors. We won’t let you down. 2 3 Excavator Buckets - General Purpose Excavator Buckets - General Purpose • Improved productivity from innovative design profile giving more efficient digging, better soil retention and clean release of material • Rear profile and torsion box has been redesigned which provides 100% fill factor and reduced drag • Hardox 400 toeplate • Buckets shift up to 12% more material per litre of fuel when compared to old JCB buckets making a standard work cycle more cost efffective to the end user • JCB ‘CAT’ style teeth and adaptors with horizontal pin locking • The pivot position has been lowered which retains a higher percentage tear out force than previous and competitor’s buckets Application (DIN18300): Class 1-4: Easily dug and medium stiff soils, clay and gravel. Part number (with pins) Outer width mm* Capacity m³ Teeth Weight (with pins) kg JS115-JS145/JS130W-JS145W/JS220LR/JS260LR 980/A0390 600 0.35 3 309 980/A0391 700 0.42 4 335 980/A0392 800 0.50 4 358 980/A0393 1000 0.66 5 406 980/A0394 1200 0.81 5 451 980/A0395 1300 0.89 6 477 JS160-JS190/JS160W-JS175W/JS330LR/JS360LR 980/A0380 600 0.38 3 448 980/A0381 1000 0.70 4 577 980/A0382 1200 0.91 5 645 980/A0383 1300 0.99 5 673 JS200-JZ255/JS200W/JS330HDR 980/A0370 600 0.38 3 522 980/A0371 700 0.51 3 579 980/A0372 900 0.66 4 643 980/A0373 1100 0.81 4 696 980/A0374 1200 0.96 5 761 980/A0375 1350 1.11 5 813 980/A0376 1500 1.25 6 878 *Width may be up to 50mm wider than stated. 4 Application (DIN18300): Class 1-4: Easily dug and medium stiff soils, clay and gravel. Part number (no pins) Outer width mm Capacity m³ Teeth Weight kg 980/A9441 600 0.43 3 575 980/A9442 1200 1.05 5 867 980/A9443 1500 1.37 6 1011 980/A9119 900 0.86 4 834 980/A9130 1350 1.43 5 1058 980/A9131 1500 1.62 6 1145 980/A9132 1750 1.93 7 1277 JS240-JS260 JS290-JS360 5 Excavator Buckets - Heavy Duty Excavator Buckets - Heavy Duty • Improved productivity from innovative design profile giving more efficient digging, better soil retention and clean release of material • Hardox 400 components • Rear profile and torsion box has been redesigned which provides 100% fill factor and reduced drag • Buckets shift up to 12% more material per litre of fuel when compared to old JCB buckets making a standard work cycle more cost efffective to the end user • JCB S Series ‘Esco Super V helix’ style teeth and adaptors with vertical pin locking Application (DIN18300): Class 5 and 6: Soil not easily dug, easily broken rock and comparable soil (hardened by drying or freezing or with high rock content). Part number (no pins) Outer width mm Capacity m³ Teeth Weight kg JS115-JS145/JS130W-JS145W 980/A9188 600 0.35 3 336 980/A9189 700 0.42 3 364 980/A9190 800 0.50 4 402 980/A9191 1000 0.66 4 455 980/A9192 1200 0.81 5 520 980/A9193 1300 0.89 5 547 JS160-JS190/JS160W-JS175W Application (DIN18300): Class 5 and 6: Soil not easily dug, easily broken rock and comparable soil (hardened by drying or freezing or with high rock content). 980/99624 600 0.38 3 442 980/99623 1000 0.70 4 594 980/99622 1200 0.91 5 675 Part number (no pins) 980/99621 1300 0.99 5 708 JS200-JZ255/JS200W Optional bucket pin kit 980/88543 is available for JS115-JS145/JS130W-JS145W Optional bucket pin kit 980/88544 is available for JS160-JS190/JS160W-JS175W All of the JCB HD ECO Buckets feature Hardox 400 components for extended working life. (These are identified in purple). 1. Toe Plate 3. Outer Shell 2. Side Cutter Plate 4. Side Wear Plate Outer width mm Capacity m³ Teeth Weight kg 980/A9000 600 0.38 3 543 980/A9001 700 0.52 3 609 980/A9002 900 0.66 4 690 980/A9003 1100 0.81 4 751 980/A9004 1200 0.96 4 812 980/A9005 1350 1.11 5 893 980/A9006 1500 1.25 5 954 980/A9351 600 0.43 3 647 980/A9352 1200 1.05 4 968 980/A9353 1500 1.37 5 1141 980/A9110 900 0.86 3 925 980/A9112 1350 1.43 4 1189 980/A9113 1500 1.62 5 1268 980/A9114 1750 1.93 6 1428 JS240-JS260 JS290-JS360 3 4 Optional bucket pin kit 980/88544 is available for JS200-JZ255/JS200W Optional bucket pin kit 980/88545 is available for JS240-JS260 Optional bucket pin kit 980/88546 is available for JS290-JS360 1 2 6 7 Excavator Buckets - Extra Heavy Duty Excavator Buckets - Grading/Ditch Maintenance • Heavy duty construction with additional rear wear strips • Central reinforcing rib for additional strength • Delta shaped toe plate for improved penetration • Drainage holes for ditching work in wet conditions • ‘Cat’ style teeth and adaptors with horizontal pin locking Application (DIN18300): Class 5 and 6: Soil not easily dug, easily broken rock and comparable soil (hardened by drying or freezing or with high rock content). Part number (no pins) Outer width mm Capacity m³ Teeth Weight kg 1700 1.9 5 2050 JS290-JS360 980/A1111 Excavator Buckets - Rock • Heavy duty construction with additional internal ribs and rear wear strips • Delta shaped toe plate for improved penetration • ‘MTG’ tooth system • ‘MTG’ hard wearing toe plate lip and bucket heel shrouds and side cutter protection Part number Application (DIN18300): Class 7: Hard rock. Part number (no pins) Outer width mm Capacity m³ Teeth 1700 1.9 5 Weight kg JS330/JS360 980/A0716 2380 Outer width mm Capacity m³ Teeth Weight kg JS115-JS145/JS130W-JS145W/JS220LR/JS260LR with pins 980/A2765 1524 0.65 - 475 980/A2766 1836 0.79 - 535 0.79 - 604 with pins and bolt-on toeplate 980/A1782 1836 JS160-JS190/JS160W-JS175W/JS330LR/JS360LR with pins 980/A2767 1524 0.65 - 487 980/A2768 1836 0.79 - 545 1836 0.79 - 628 331/12864 1524 0.72 - 608 980/A2769 1830 0.87 - 698 980/A2770 2058 1.02 - 791 2058 1.02 - 830 2200 1.30 - 800 333/A2271 2200 1.71 - 1132 333/A2272 2500 1.96 - 1255 with pins and bolt-on toeplate 980/A1783 JS200-JZ255/JS200W with pins with pins and bolt-on toeplate 980/A1784 JS240-JS260 no pins 333/A2270 JS290-JS360 no pins 8 9 Excavator Buckets - Ripper Hydraulic Quickhitch (Requires quickhitch installation kit) • Powerful penetration from unique, staggered ripper teeth • Increased productivity: three times faster than single pointed ripper • Allows safe, rapid attachment change without leaving the cab, minimising down time • Forked teeth boost material break-up • Ensures optimum attachment is always used • Ability to rip and remove broken material in one pass • Ultimate safety from two independent locking mechanisms • JCB CE certified for use with JCB machines • Linked to dipper position sensor on machine to ensure safe pick-up position • Please see latest issue of JCB Attachments sales flash ATT / 80 for more information • The only JCB approved and fully CE marked product for JS excavators available on the market Machine fitment Installation kit part number Hitch part number Additional parts JS115-145 Mono 980/A7800 980/A7850 - JS130-145 TAB 980/A7800 980/A7850 333/K9225 JZ130-145 Mono & TAB TBA 980/A7850 - JS160-195 Mono 980/A7800 980/A7851 - JS160-195 TAB 980/A7800 980/A7851 333/K0183 JS200-220 Mono 980/A7801 980/A7852 - JS200-220 TAB 980/A7801 980/A7852 333/K0183 JZ235-255 Mono & TAB TBA 980/A7852 - JS240-260 Mono N/A N/A N/A JS290-360 Mono N/A N/A N/A JS460 N/A N/A N/A JS115-145 Mono 980/A8730 980/A7850 - JZ130-145 Mono & TAB 980/A9121 980/A7850 - JS160-195 Mono 980/A8730 980/A7851 - JS160-195 TAB 980/A8730 980/A7851 332/A9142 JS200-220 Mono 980/A8731 980/A7852 - JS200-220 TAB 980/A8732 980/A7852 - JZ235-255 Mono & TAB 980/A9124 980/A7852 - JS240-260 Mono 980/A7959 980/A6153 - JS240-260 TAB 980/A7961 980/A6153 - JS290-360 Mono & TAB 980/A7961 980/A6154 - JS460 N/A N/A - Smart Control Part number (no pins) Outer width mm Capacity m³ Teeth Weight kg JS200-JZ255/JS200W 980/A3910 780 0.34 3 767 AMS Control Additional parts required - for DECU/Smart Control For machines without an additional hydraulic function (low flow hydraulics, double acting auxiliary etc.) an additional HECU may be required. If the machine is being upgraded with any of the above functions the same HECU is required. Only one HECU is required for any combination of the Hitch installation, low flow, hammer pipe work or double acting auxiliary etc. HECU kit part number 333/A5550. 10 11 Selector Grabs (Requires double acting auxiliary and low flow hydraulic service) Rock Wheels (Requires hammer pipework) • The perfect excavation solution where accuracy of cut, low noise and low vibration are important • 360° unlimited rotation • Ideal alternative to breakers where potential damage to surrounding buildings and services is a concern • No end stops ensuring grab will always close, even as the toe plates wear • Quickhitch compatible • Features direct drive with heavy duty bearings and seals for improved durability • Clamping cylinder features a hose burst check valve for maximum safety • Easy to replace tungsten steel bullet type teeth • Perforated shells offering greater material retention and improved visibility • 500 Brinell hard wearing toe plates are reversible for extended life • Large jaw opening for ease of handling awkward items • Side mounted hoses with guarding to prolong hose life Machine ready with hanger bracket and hoses. Part number Model Closed capacity l Closed capacity m³ Weight kg Jaw width mm Opening width mm JS130/JS145/JZ140/JS130W/JS145W 980/A0601 Part number SG325 325 0.325 870 800 1750 SG400 400 0.4 980 850 1830 SG530 530 0.53 1305 900 2000 SG620 620 0.62 1550 1100 2190 12 Max. pick force kN 980/A1343 RW-50 720 830 6320 26.6 980/A1345 RW-50 765 830 6320 26.6 980/A1347 RW-100N 1400 1060 14270 44.2 RW-100N 1435 1060 14270 44.2 JS240-JS260 JS200WMH 980/A0606 Max. shaft torque Nm JS200-JZ255 JS200-JS220/JS200W 980/A0604 Cutting width mm JS160-JS190 JS20MH 980/A0603 Weight kg JS130-JS145 JS160/JS160W 980/A0602 Model SG620 620 0.62 1550 1100 2190 980/A1349 13 Hammermaster Breakers (Requires hammer pipework) Hammermaster Breakers (Requires hammer pipework) • Quiet operation: dampers between casing and percussion unit minimise noise emissions Machine ready with hanger bracket and hoses. • High efficiency from power boost which captures recoil energy for reuse on the next stroke • Performance matched to JCB machines • Autogrease saves time and ensures proper lubrication for long life Part number Model Tool supplied Operating weight kg Impact energy J Blow rate bpm JS115-JS145/JS130W-JS145W • Autostop prevents blank firing to extend component life 980/A8648 HM870Q Moil 800 1343 850 980/A8649 HM870Q Chisel 800 1343 850 • Dust wiper around steel prevent damaging dust ingress JS160-JS190/JS160W-JS175W 980/A8650 HM870Q Moil 800 1343 850 980/A8651 HM870Q Chisel 800 1343 850 JS115-JS145/JS130W-JS145W 980/A8900 HM1270Q Moil 1200 2044 750 980/A8901 HM1270Q Chisel 1200 2044 750 JS160-JS190/JS160W-JS175W 980/A8902 HM1270Q Moil 1200 2044 750 980/A8903 HM1270Q Chisel 1200 2044 750 980/A8904 HM1270Q Moil 1200 2044 750 980/A8905 HM1270Q Chisel 1200 2044 750 JS200W JS160-JS190/JS160W-JS175W 980/A8910 HM1570Q Moil 1500 2530 700 980/A8911 HM1570Q Chisel 1500 2530 700 JS200-JZ255 980/A8912 HM1570Q Moil 1500 2530 700 980/A8913 HM1570Q Chisel 1500 2530 700 JS200-JZ255 980/A8920 HM1770Q Moil 1800 3155 400-680 980/A8921 HM1770Q Chisel 1800 3155 400-680 JS240-JS260 Hanger bracket and hoses not included. For use with non-JCB machines. Part number Model Suitable carrier machine weight t Tool supplied Operating weight kg Impact energy J 980/A8922 HM1770Q Moil 1800 3155 400-680 980/A8923 HM1770Q Chisel 1800 3155 400-680 980/A8940 HM2470Q Moil 2200 3864 375-600 980/A8941 HM2470Q Chisel 2200 3864 375-600 JS240-JS260 Blow rate bpm JS290-JS360 980/A8652 HM870Q 12-18 Moil 800 1343 850 980/A8942 HM2470Q Moil 2200 3864 375-600 980/A8653 HM870Q 12-18 Chisel 800 1343 850 980/A8943 HM2470Q Chisel 2200 3864 375-600 980/A8906 HM1270Q 15-24 Moil 1200 2044 750 JS290-JS360 980/A8907 HM1270Q 15-24 Chisel 1200 2044 750 980/A8930 HM3070Q Moil 3000 5497 380-600 980/A8914 HM1570Q 17-28 Moil 1500 2530 700 980/A8931 HM3070Q Chisel 3000 5497 380-600 JS460 980/A8915 HM1570Q 17-28 Chisel 1500 2530 700 980/A8924 HM1770Q 20-33 Moil 1800 3155 400-680 980/A8932 HM3070Q Moil 3000 5497 380-600 980/A8925 HM1770Q 20-33 Chisel 1800 3155 400-680 980/A8933 HM3070Q Chisel 3000 5497 380-600 980/A8944 HM2470Q 25-40 Moil 2200 3864 375-600 980/A8945 HM2470Q 25-40 Chisel 2200 3864 375-600 980/A8934 HM3070Q 35-55 Moil 3000 5497 380-600 980/A8935 HM3070Q 35-55 Chisel 3000 5497 380-600 14 15 Multiprocessor - Cutter Crusher (Requires merged double acting auxiliary and low flow hydraulic service) Crushing & Screening Equipment JCB Attachments also offer a full range of crusher buckets and powered screening products. This range is capable of reducing brick, concrete rubble, (including materials with rebar), and rock to hard core size and provides a viable, cost-effective alternative to the mobile crushing plant. • Used to demolish buildings in a safe and controlled manner • Crusher buckets are used for on-site recycling of demolition material, in quarries and construction, boosting the earning potential and versatility of JCB Excavators in diverse applications. Allows material to be removed, processed and separated by one machine so that the different materials can be recycled Please contact JCB Attachments for more information on this range. • The heavy duty rotation unit offers unlimited 360º rotation • All wear parts are reversible and can easily be replaced on-site without the need for workshop facilities Machine ready with hanger bracket and hoses. Part number Model Type Max cutting force t Max. jaw opening mm Weight kg 980/A2389 MP200 Universal 200 750 1843 980/A2404 MP200S Steel 200 750 1708 980/A2391 MP200 Universal 200 750 1680 980/A2405 MP200S Steel 200 750 1520 980/A2376 MP200 Universal 200 750 2808 980/A2406 MP200S Steel 200 750 2588 980/A2392 MP300 Universal 300 880 2740 980/A2408 MP300S Steel 300 880 2690 JS160-JS190 JS200-JZ255 JS330HRD JS240-JS260 JS290-JS360 980/A2393 MP300 Universal 300 880 2808 980/A2409 MP300S Steel 300 880 2588 980/A2395 MP400 Universal 400 1010 3423 980/A2410 MP400S Steel 400 1010 3222 JS460 Product Model Capacity m³ CB60 0.6 CB70 0.66 CB90 0.90 CB120 1.30 CB150 2.30 SB10 0.60 SB14 1.2 SB18 2.4 SB23 4.7 JS130-JS160* Crusher Bucket JS175-JZ255* Crusher Bucket JS240-JS360* Crusher Bucket JS460* Crusher Bucket >70 TON UNIVERSAL* Crusher Bucket JZ70-JS190* Powered Screener JS130 - JS260* Hanger bracket and hoses not included. For use with non-JCB machines. Part number Model Suitable carrier machine weight t Type Max cutting force t Max. jaw opening mm Powered Screener Weight kg 980/A0768 MP200U 15-25 Universal 200 750 1680 980/A0769 MP300U 22-35 Universal 300 880 2640 980/A0775 MP400U 30-55 Universal 400 110 3480 16 JS200-JS260* Powered Screener JS360-JS460* Powered Screener *This is a general guide and is dependent on machine dipper lengths. Refer to machine stability matrix in the attachment handbook for definite machine attachments configurations. 17 Notes 18 Notes 19 Sales Resources: Further sales support material is available to download from www.jcbstore.com, including: •Sales flashes •Images •Brochures •Latest News •Specification sheets FO R I N T E R N A L U S E O N LY For more information: Email: [email protected] Tel: +44 (0)1889 506047 www.jcb.com JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5817 en-GB 06/14 Issue 2
Similar documents
Hydraulic Breaker Tools - Rock Drill Sales and Service
Advancing in large steps will decrease your performance. Advancing in small steps is more efficient and increases your productivity.
More information