Entrance Handlesets - Brass Harrison and Middleton Mortise

Entrance Handlesets - Brass Harrison and Middleton Mortise

Entrance Handlesets - Brass Harrison and Middleton Mortise
211/16”
211/16”
211/16”
21/8”
10”
21/8”
35/16”
10”
183/4”
47/16”
Standard interior trim
Part # 3351/3352
Harrison Trim Style
Part # 3351
Middleton Trim Style
Part # 3352
Additional Dimensions: (Part# 3351/3352)
• Exterior Projection is 2 3⁄4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11⁄4”
• Clearance between door & grip is 2”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
1
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Albany Mortise
2
213⁄16”
13
⁄16”
21⁄8”
35⁄ 16”
93⁄4”
195⁄ 16”
43⁄ 16”
Albany Trim Style
Part # 3350
Additional Dimensions: (Part# 3350)
• Exterior Projection is 2 3⁄4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11⁄4”
• Clearance between door & grip is 2”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
2
Entrance Handlesets - Brass Mormont & Lugano Mortise
2 1/2"
2 1/2"
2 1/2"
39/16"
10 1/4"
10 1/4"
47/16"
17 5/8"
18”
2"
1 3/4"
Mormont Trim Style
Part # 3347
Lugano Trim Style
Part # 3348
Standard interior trim
Part # 3347/3348
Additional Dimensions: (Part# 3347/3348)
• Exterior Projection is 2 1⁄2”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1"
• Clearance between door & grip is 1 1/2” - 1 7/8"
• Plates thickness: 1/2"
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
3
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Zeus Mortise
2 7/8"
2 15/16"
2 9/16"
3 3/4"
10 1/4"
10 1/4"
4 1/4"
17 5/8"
2"
1 1/2"
Zeus Trim Style
Part # 3346
Additional Dimensions: (Part# 3346)
• Exterior Projection is 2 1⁄2”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1"
• Clearance between door & grip is 1 1/2” - 1 7/8"
• Plates thickness: 1/2"
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
4
Entrance Handlesets - Brass Hera Mortise
2 1/2"
3 3/8"
2 3/8"
10 1/4"
4 1/2"
18 1/2"
2 1/2"
Hera Trim Style
Part # 3345
Additional Dimensions: (Part# 3345)
• Exterior Projection is 2 3⁄4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1"
• Clearance between door & grip is 2 1/4”
• Plates thickness: 1/2"
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
5
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Artemis Mortise
2 1/2"
2 1/2"
3 3/8"
2 3/8"
10 1/4"
10 1/4"
4 1/2"
17 7/8"
2 3/4"
1 3/4"
Artemis Trim Style
Part # 3344
Additional Dimensions: (Part# 3344)
• Exterior Projection is 2 3⁄4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1"
• Clearance between door & grip is 2 1/4”
• Plates thickness: 1/2"
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
6
Entrance Handlesets - Brass Salem & Memphis Mortise
113⁄ 16”
2 1 ⁄ 2”
2 1⁄ 4”
3 5⁄ 8”
3”
3”
10”
3”
10”
41 ⁄ 2”
4”
19”
19”
3”
3”
113⁄ 16”
113⁄ 16”
Salem Trim Style
Part # 3301
3 3⁄ 4”
Memphis Trim Style
Part # 3302
Standard interior trim
Part # 3301/3302*
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Additional Dimensions: (Part # 3301 & 3302)
• Exterior Projection is 2 3⁄4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1 1⁄4”
• Clearance between door & grip is 2”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
7
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Jackson & Hamilton Mortise
113⁄ 16”
21 ⁄ 2”
2 3⁄ 8”
35 ⁄ 8 ”
213⁄ 16”
2 3⁄ 4”
9 3⁄ 4”
9 3⁄ 4”
37⁄ 8”
4 1 ⁄ 2”
17”
39⁄ 16”
17”
213⁄ 16”
17⁄ 16”
Jackson Trim Style
Part # 3303
17⁄ 16”
Standard interior trim
Part # 3303/3304*
Hamilton Trim Style
Part #3304
Additional Dimensions: (Part # 3303 & 3304)
• Exterior Projection is 2 7⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1 1⁄4”
• Clearance between door & grip is 1 1⁄2”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
8
Entrance Handlesets - Brass Charleston Mortise
213⁄16”
21⁄8”
35⁄ 16”
213⁄16”
93⁄4”
93⁄4”
19”
43⁄ 16”
3”
2 1⁄ 8”
Charleston Trim Style
Part # 3343
Additional Dimensions: (Part# 3343)
• Exterior Projection is 2 3⁄4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11⁄4”
• Clearance between door & grip is 2”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
9
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Oval Ribbon & Reed Mortise
23⁄4”
3 15⁄16”
35⁄16”
35⁄16”
10 5⁄16”
10 5⁄16”
17 5⁄8”
41⁄8”
17⁄16”
Oval Ribbon & Reed Mortise Trim
Part #3342
Standard interior trim
Part #3342*
Additional Dimensions: ( Part # 3342 )
• Exterior Projection is 23 ⁄ 4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄ 8”
• Clearance between door & grip is 19 ⁄ 16”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
10
Entrance Handlesets - Brass Mills Mortise
23⁄ 4”
1 1⁄ 2”
39⁄ 16”
3”
21⁄ 2”
23⁄ 4”
10”
171 ⁄ 4”
4 3⁄ 4”
3 3⁄ 4”
2 1 ⁄ 4”
2 1 ⁄ 4”
Standard interior trim
Part #3310*
Mills Trim
Part #3310
Additional Dimensions: ( Part # 3310 )
• Exterior Projection is 25⁄ 8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1”
• Clearance between door & grip is 13⁄ 8”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
11
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Manhattan & Melrose Mortise
23⁄ 4”
25⁄ 8”
2 3⁄ 8”
39⁄ 16”
2 3⁄ 4”
10”
171 ⁄ 4”
10”
181 ⁄ 2”
33⁄ 4”
2 1 ⁄ 4”
21 ⁄ 4”
Manhattan Trim Style
Part # 3306
3”
Melrose Mortise Trim Style
Part # 3305
Additional Dimensions: ( Part # 3306 & 3305 )
• Exterior Projection is 25⁄ 8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1”
• Clearance between door & grip is 13⁄ 8”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
Standard interior trim
Part # 3306/3305*
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
12
Entrance Handlesets - Brass Regency & Versailles Mortise
3 1⁄ 8”
3”
31 ⁄ 8 ”
3”
3”
123⁄ 16”
175 ⁄ 8”
4 7⁄ 8”
123⁄ 16”
201 ⁄ 2”
51⁄ 16”
17⁄ 16”
Regency Trim Style
Part # 3307
Versailles Trim Style
Part # 3309
Additional Dimensions: ( Part # 3307 & 3309 )
• Exterior Projection is 23 ⁄ 4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄ 8”
• Clearance between door & grip is 19 ⁄ 16”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
Standard interior trim
Part # 3307/3309*
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
13
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Craftsman Mortise
3”
3”
3”
47⁄ 16”
11”
11”
18”
49⁄ 16”
Craftman Trim Style
Part # 3308
Standard Interior Trim
Part # 3308*
Additional Dimensions: ( Part # 3308 )
• Exterior Projection is 25⁄ 8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11⁄ 8”
• Clearance between door & grip is 13⁄ 8”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
14
Entrance Handlesets - Brass Craftsman Full Length Mortise
3”
3”
3”
47⁄ 16”
11”
19”
49⁄ 16”
Standard Interior Trim
Part # 3349*
Craftsman Full Length Trim Style
Part # 3349
Additional Dimensions: ( Part # 3349 )
• Exterior Projection is 25⁄ 8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11⁄ 8”
• Clearance between door & grip is 13⁄ 8”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
15
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Brass Valley Forge Mortise
213⁄ 16”
2 5⁄ 8”
213⁄ 16”
3 1⁄ 2”
111⁄ 4”
111⁄ 4”
18”
53⁄ 8”
17⁄ 16”
Standard interior trim
Part # 3341*
Valley Forge Mortise Trim Style
Part # 3341
Additional Dimensions: ( Part # 3341 )
• Exterior Projection is 3”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 17⁄ 16”
• Clearance between door & grip is 11⁄ 4”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
16
Entrance Handlesets - Sandcast Bronze Sonoma & Longmont Mortise
213⁄ 16”
213⁄ 16”
2 1⁄ 4”
2 1⁄ 4”
213⁄ 16”
10”
37⁄ 16”
171 ⁄ 2”
10”
19”
45⁄ 16”
Order any Sandcast Bronze
knob or lever for the inside trim.
23⁄ 4”
Standard with Mortise Locks
• 2 ½” or 2 ¾” backsets
• Standard Mortise Door Prep ANSI A115.1
• Schlage C Keyway
23⁄ 16”
Sonoma Entryset
Part # 3329
Longmont Entryset
Part # 3330
Additional Dimensions: (Part # 3329 & 3330)
• Exterior Projection is 31⁄ 8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄ 4”
• Clearance between door & grip is 13⁄ 4”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
17
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Sandcast Bronze Morgan & Rockford Mortise
213⁄ 16”
213⁄ 16”
21 ⁄ 4”
2 1⁄ 4”
213⁄ 16”
10”
37⁄ 16”
19”
161 ⁄ 4”
10”
45⁄ 16”
3”
Standard interior trim
Part # 3327/3328
23⁄ 16”
Morgan Entryset
Part # 3327
Rockford Entryset
Part # 3328
Additional Dimensions: (Part # 3327 & 3328)
• Exterior Projection is 31⁄ 8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄ 4”
• Clearance between door & grip is 13⁄ 4”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
18
Entrance Handlesets - Bronze Denver Mortise
1 3⁄ 4”
3 1 ⁄ 2”
213⁄ 16”
27⁄ 16”
2 3⁄ 4”
31 ⁄ 2”
161 ⁄ 4”
4 1 ⁄ 2”
91 ⁄ 2”
3 5⁄ 8”
3”
Standard interior trim
Part # 3323*
21 ⁄ 8”
Denver Mortise Entryset
Part # 3323
Additional Dimensions: (Part # 3323)
• Exterior Projection is 3”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1”
• Clearance between door & grip is 11⁄ 2”
• Plates thickness: 1 ⁄ 2”
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
19
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Bronze Cheyenne & Topeka Mortise
23⁄ 4”
2 1 ⁄ 8”
213⁄ 16”
91 ⁄ 2”
2 3⁄ 4”
3”
31 ⁄ 2”
161 ⁄ 4”
9 1 ⁄ 2”
195⁄ 16”
35⁄ 8”
3”
Standard interior trim
Part # 3321/3322*
21 ⁄ 8”
Cheyenne Entryset
Part # 3321
Topeka Entryset
Part # 3322
Additional Dimensions: (Part # 3321& 3322)
• Exterior Projection is 31⁄ 8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄ 4”
• Clearance between door & grip is 13⁄ 4”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
20
Entrance Handlesets - Bronze Rectangular Sectional & Monolithic Mortise
213⁄16”
11⁄2”
21⁄4”
23⁄8”
37⁄16”
3”
213⁄16”
10”
2 13⁄16”
43⁄4”
161⁄4”
10”
161⁄4”
45⁄16”
3”
3”
2 3⁄16”
Rectangular Sectional Mortise
Part # 3324
21⁄8”
Standard interior trim
Part # 3324/3325*
Rectangular Monolithic Mortise
Part # 3325
Additional Dimensions: (Part # 3324, 3325)
• Exterior Projection is 31⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄4”
• Clearance between door & grip is 13⁄4”
• Plates thickness: 1⁄2”
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
21
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Bronze Rectangular Full Length Mortise
213⁄16”
21⁄4”
37⁄16”
10”
213⁄16”
45⁄16”
19”
Standard interior trim
Part # 3326*
Rectangular Full Length Mortise
Part # 3326
Additional Dimensions: (Part # 3326)
• Exterior Projection is 31⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄4”
• Clearance between door & grip is 13⁄4”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
22
Entrance Handlesets - Tuscany Naple & Da Vinci Mortise
3”
113⁄ 16”
2 1 ⁄ 4”
35⁄ 8”
21 ⁄ 2 ”
37⁄ 16”
3”
10”
3”
41 ⁄ 2”
181 ⁄ 2”
181 ⁄ 2”
47⁄ 16”
3”
3”
113⁄ 16”
113⁄ 16”
Naples Mortise Entryset
Part # 3334
10”
Da Vinci Entryset
Part # 3331
Additional Dimensions: (Part # 3334, 3331)
• Exterior Projection is 39⁄ 32”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 19⁄ 16”
• Clearance between door & grip is 17⁄ 8”
• Plates thickness: 11⁄ 16”
Standard interior trim
Part # 3331/3334*
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Same dimensions for dummy function
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
23
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Tuscany Octagon & Art Nouveau Mortise
27⁄8”
3”
211⁄16”
3”
37⁄8”
101⁄2”
3”
35⁄8”
10”
3”
11”
11”
43⁄8”
37⁄8”
18”
171⁄2”
21⁄2”
Standard interior trim
Part # 3333*
2”
Standard interior trim
Part # 3332*
11⁄2”
Art Nouveau Mortise Entryset
Left Hand Grip
Part # 3332
Octagon Mortise Entryset
Part # 3333
Additional Dimensions: (Part # 3333 & 3332)
• Exterior Projection is 31 ⁄ 16”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 21 ⁄ 8”
• Clearance between door & grip is 19⁄ 16”
• Plates thickness: 1 ⁄ 2”
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
24
Entrance Handlesets - Wrought Steel Sectional Mortise
25⁄ 16”
1 3⁄ 4”
3 5⁄ 8”
31 ⁄ 2”
9 5⁄ 8”
21 ⁄ 2”
33⁄ 4”
29⁄ 16”
43⁄ 8”
3”
17”
21 ⁄ 8”
1 3⁄ 4”
San Carlos Grip
Normandy Grip
Part # 3315
1 3⁄ 4”
Part # 3316
Additional Dimensions: (Part # 3315)
• Exterior Projection is 31⁄2”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 3⁄4”
• Clearance between door & grip is 2”
• Plates thickness: 1⁄2”
Lafayette Grip
Standard interior trim
Part # 3314/3315/3316*
Same dimensions for dummy function
Part # 3314
Additional Dimensions: (Part # 3314)
• Exterior Projection is 31⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11⁄2”
• Clearance between door & grip is 11⁄4”
• Plates thickness: 1⁄2”
Additional Dimensions: (Part # 3316)
• Exterior Projection is 3”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1”
• Clearance between door & grip is 15⁄8”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
Same dimensions for dummy function
* Available in
Lever By Lever/
Knob by Knob
Mortise Entrance
Handlesets.
Same dimensions
as interior trim of
standard mortise
entrance
handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
25
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
Entrance Handlesets - Wrought Steel Monolithic Mortise
25⁄ 16”
21⁄ 16”
25⁄ 16”
35⁄ 8”
95⁄ 8”
95⁄ 8”
33⁄ 4”
17”
3”
2 1 ⁄ 8”
13⁄ 4”
San Carlos Grip
Normandy Grip
Part # 3312
Part # 3313
Standard interior trim
Part # 3311, 3312, 3313*
Additional Dimensions: (Part # 3312)
• Exterior Projection is 31⁄2”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 3⁄4”
• Clearance between door & grip is 2”
• Plates thickness: 1⁄2”
13⁄ 4”
Lafayette Grip
Same dimensions for dummy function
Part # 3311
Additional Dimensions: (Part # 3311)
• Exterior Projection is 31⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11⁄2”
• Clearance between door & grip is 11⁄4”
• Plates thickness: 1⁄2”
Additional Dimensions: (Part # 3313)
• Exterior Projection is 3”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1”
• Clearance between door & grip is 15⁄8”
• Plates thickness: 1⁄2”
Same dimensions for dummy function
Same dimensions for dummy function
* Available in
Lever By Lever/
Knob by Knob
Mortise
Entrance
Handlesets.
Same
dimensions as
interior trim of
standard
mortise
entrance
handlesets.
Door Thickness Specifications
Standard Door Thickness: 13⁄4”
Extended Door Thickness: 1 7/8”- 2 1⁄4”
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Standard Components:
• 1 3⁄8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 1⁄2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 1/2” Threaded Cylinder
• 2” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Components:
• 1 3⁄4” Threaded Cylinder
• 2 1⁄4” Long Spindle
• 2 1⁄2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 3/4” TD Requires 2” Threaded Cylinder
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744
Tel: 800.356.2741 Fax: 800.577.5771
www.emtek.com
26