Application Chart 2012.indb

Transcription

Aplikační tabulky GIVI 2012
CODE
DESCRIPTION
NOTE
APRILIA - BENELLI
BMW - CAN AM - DUCATI
APRILIA
SCARABEO 50-100 (09 >11)
152A
Specific screen, transparent 48 x 66 cm (H x W)
153A
A152A
Specific fitting kit for 152A-153A
YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.
SPORTCITY ONE 50-125 (08 > 11)
SR740
Special rack for MONOLOCK® boxes
134A
136A
A151A
Specific fitting kit for 134A and 136A
maximum load allowed 3 kg / use the plate included in the box
SR 50 DITECH (97 > 05)
SR78
use the plate included in the box
ATLANTIC 125-200-250-300 (03 > 11)
E314M
Specific rear plate for MONOLOCK® case
D242ST
MONOLOCK® plate M5M in nylon included
19 cm higher than original
LEONARDO 125-150 (< 10/01)
D236S
Specific screen, smoked 35,5 x 47,7 cm (H x W)
HABANA 125 (00 > 09)
SR74
Special rack
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
SCARABEO 125-200 (07 > GIUGNO 11)
154A
A154A
Specific fitting kit for 154A
E318
SCARABEO 125-200 (DA LUGLIO 11) NEW
SR6701
1000A
A154A
SPORTCITY 125-200-250 (04 > 08)
E316
105A
A129A
128A
8 cm. higher than 105A
SPORTCITY CUBE 125-200-300 (08 > 11)
96
E319
134A
136A
A150A
= Item available until it runs out of stock
Application Chart 2012.indb 96
13/03/12 10.15
CODE
DESCRIPTION
2
NOTE
LEONARDO 250 (99 > 01)
Specific screen, smoked 46 x 49,5 cm (H x W)
APRILIA - BENELLI
D238S
SCARABEO 250-300 (07 > 11)
E730
E317M
MONOLOCK® plate M5M in nylon included / you must puncture the
housing in arranged sections / maximum load allowed 3 Kg
130A
A148A
ATLANTIC 400-500 SPRINT (05 > 11)
E314M
D242ST
SCARABEO 400-500 (06 > 11)
E730
E317M
Specific rear plate for MONOLOCK case
housing in arranged sections / maximum load allowed 3 Kg
130A
A130A
®
ATLANTIC 500 (02 > 06)
D240ST
SCARABEO 500 (03 > 05)
D243ST
PEGASO 650 CUBE (97 > 00)
D237S
Specific screen, smoked 43,7 x 32,5 cm ( h x l)
PEGASO 650 IE (01 > 04)
D237S
Specific screen, smoked 43,7 x 32,5 cm ( h x l)
PEGASO 650 STRADA / TRAIL (05 > 11)
SR79
Special rack for MONOKEY® boxes
MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg
SHIVER 750 / SHIVER GT 750 (07 > 09)
BF02
Specific metal flange for fitting the TankLock tank bags
SHIVER 750 (10 > 11) NEW
only match the plates M5, M5M, M6M / A handle bar for the passenger
is included, you must remove the original grab rails
6702FZ
Specific Monorack arms
TE6702
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF02
DORSODURO 750 (08 > 11)
SR6700
SR6700M
TE6700
maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included /
you must puncture the housing in arranged sections
housing in arranged sections
MANA 850 / MANA 850 GT (08 > 11)
732FZ
only match the plates M5, M5M, M6M / you must remove the grab
handles / is compatible with the original side case holder
THE ITALIAN SIGN OF MOTODESIGN
97
13/03/12 10.15
CODE
DESCRIPTION
3
NOTE
ETV 1000 CAPONORD (01 > 10)
APRILIA - BENELLI
E313
Specific rear plate for MONOKEY® case
PL313
Tubular pannier holder for MONOKEY® boxes
D239ST
Specific screen, transparent 64 x 65,5 cm (H x W)
MONOKEY® plate M2 in aluminium included
compatible with year 2003 / without protective spoiler
BENELLI
TRE 899 K / TRE 1130 K (06 > 11) NEW
8700FZ
PL8700
Tubular pannier holder for MONOKEY boxes
BF02
only match the plates M5, M5M, M6M
you must move the indicators from their original position
®
BMW
F 650 (94 > 96)
D230S
F 650 CS SCARVER (02 > 06)
SR682M
MONOLOCK® plate M5M in nylon included / maximum load allowed
8 Kg
F 650 GS (00 > 03)
only match the plates M2, M3, MM / compatible from august ’00 / it is
not compatible with the original sidecase holder
639F
PL188
D234S
Specific screen, smoked 41,1 x 34 cm (H x W)
F 650 GS (04 > 07)
SR685
PL188
D331ST
Specific screen, transparent 39,5 x 44 cm (H x W)
15,5 cm higher than original / not mounted with original guards
F 650 GS / F 800 GS (08 > 11)
E194
E194M
Specific rear plate
SRA5103
Special rack in aluminium for Monokey cases
PL690
MONOKEY® plate M5 in nylon included / Is compatible with the rear
plate
maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or
the remote control device on the case / Can not be mounted with art. PL690
®
mounting is only possible with the plate E194
PLR5103
Rapid release tubular side-case holder for MONOKEY cases
333DT
D333KIT
Specific fitting kit for 333DT
TN690
Specific engine guard
RP5103
Oil carter protector in Aluminium
®
26 cm higher than original F650GS
22 cm higher than original F800GS
we recommend fitting by a qualified mechanic
F 650 GS DAKAR (00 > 03)
98
639F
PL188
it is not compatible with the original sidecase holder / only match the
plates M3, MM
13/03/12 10.15
CODE
DESCRIPTION
4
NOTE
PL185
D232S
APRILIA - BENELLI
F 650 ST (97 > 99)
G 650 GS (11) NEW
SR685
PL188
D5101ST
TN5101
22 cm higher that the original
K75 750
E180
with plate in aluminium
E181
Specific rear plate for MONOKEY case
with plate in nylon
®
F 800 R (09 > 11)
SRA691
Special rack in aluminium for Monokey® cases
PLR693
Rapid release tubular side-case holder for MONOKEY® cases
TN691
maximum load allowed 6 kg / It does not allow the assembly of the stop
light kit or the remote control device on the case
F 800 S (06 > 11)
687FZ
PLX687
Tubular pannier holder for V35 MONOKEY SIDE cases
D332ST
®
you can mount only V35 MONOKEY® SIDE CASES
17 cm higher than original F800S
F 800 ST (06 > 11)
PLX687
Tubular pannier holder for V35 MONOKEY® SIDE cases
D332ST
7 cm higher than original F800ST
R 850 GS (94 > 01)
PL189
D231S
R 850 R (95 > 02)
635F
is compatible with the original side case holder / only match the plates
M3, MM
Complete with M5 Monokey plate / it can be mounted with the original
side-case holder / maximum load allowed 6 Kg
R 850 R (03 > 07)
SR683
K 100 1000 (90)
E180
E181
with plate in nylon
E180
E181
with plate in nylon
K 1100 RS
R 1100 GS (94 > 99)
SR694
Specific plate for MONOKEY® boxes
PL189
D231S
MONOKEY® plate M5 in nylon included
99
13/03/12 10.15
CODE
DESCRIPTION
5
NOTE
R 1100 R (95 > 01)
APRILIA - BENELLI
635F
M3, MM
R 1100 RS (94 > 98)
E183
to fit to the original rack
R 1100 RT (96 > 00)
E183
R 1100 S (98 > 06)
681F
only match the plates M3, MM / is compatible with the original side
case holder
R 1150 GS (00 > 03)
SR694
Specific plate for MONOKEY® boxes
PL189
D233S
Specific screen, transparent 48,5 x 36,6 cm (H x W)
R 1150 R (01 > 06)
SR683
Complete with M5 Monokey plate / it can be mounted with the original
side-case holder / maximum load allowed 6 Kg
R 1150 RT (01)
E183
E191
to fit to the original rack / MONOKEY® plate E250 included
D241ST
R 1150 RT (02 > 04)
K 1200 GT (03 > 04)
case holder
680F
case holder
BF11
680F
K 1200 RS (00 > 04)
K 1200 R (05 > 08) / K 1300 R (09 > 11)
SRA690
PLXR691
Rapid release tubular side-case holder for MONOKEY SIDE cases
®
it can be fit with the original side-case / maximum load allowed 6 kg / It does not
allow the assembly of the stop light kit or the remote control device on the case
you can mount only V35 MONOKEY® SIDECASES/ can be mounted
without the specific plate
K 1200 S (05 > 08) / K 1300 S (09 > 11)
PLR692
D334S
K 1200 GT / K 1300 GT (06 > 10) NEW
SRA692
it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the
assembly of the stop light kit or the remote control device on the case / compatible from ’07 to ’11
SR689
Special rack for MONOKEY boxes
SR684
SRA693
R 1200 GS (04 > 11)
100
®
MONOKEY® plate M5 in nylon included / in replacement of original rack
/ is compatible with the original side case holder
to fit to the original rack / maximum load allowed 6 Kg / MONOKEY®
plate M5 in nylon included
13/03/12 10.15
CODE
DESCRIPTION
6
NOTE
PL684
PLR684
330DT
D330KIT
AF330
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 54 cm (12 cm of extension) width 54 cm
TN689
BF07
Specific metal flange for fitting the TankLock tank bags - only year ’08
BF06
Specific metal flange for fitting the TankLock tank bags - year ’09 - ’11
APRILIA - BENELLI
®
14,5 cm higher than original / adjustable as the original
R 1200 GS ADVENTURE (06 > 11)
PL685
SRA5102
R 1200 R (06 > 10)
688FZ
PLX688
PLX688KIT
Specific kit to install the PLX without the Monorack
147A
A147A
only match the plates M5, M5M, M6M / it is not compatible with the
original sidecase holder / including fixing kit
you can mount only V35 MONOKEY® SIDE CASES/ / can be mounted without the
Monorack using the PLX688KIT / it can’t be mounted with the original top case
R 1200 R (11) NEW
SR5100
PLXR5100
Rapid release tubular side-case holder for MONOKEY® SIDE cases
147A
A5100A
TN5100
BF06
maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included
you can mount only V35 MONOKEY® SIDECASES
R 1200 RT (05 > 11)
E193
MONOKEY® plate E250 included
CAN AM
SPYDER 990 (08 > 11)
PLX770
D770ST
you must move from there original position / you can mount only V35
MONOKEY® SIDE CASES SIDE V35
101
13/03/12 10.15
CODE
DESCRIPTION
7
NOTE
APRILIA - BENELLI
DUCATI
MONSTER 696 / 796 / 1100 (08 > 11)
780FZ
A780
Specific screen, smoked 34 x 40 cm (H x W)
T681
Tubular side holder for soft luggage
7400KIT
Specific kit to install the TE7400 and the T681 without the Monorack
BF09
only match the plates M5, M5M, M6M / maximum load allowed 6 kg
including fixing kit
MONSTER S2R / S4R / S4RS 800 - 1000 (04 > 08)
T680
ST 2 / ST 4 900 (97 > 01)
675F
only match the plates M3, MM / it is not compatible with the original
sidecase holder
only match the plates M3, MM / it is not compatible with the original
sidecase holder
ST 3 1000 (04 > 08)
675F
MULTISTRADA 620 / MULTISTRADA 1000 DS (03 > 06)
SR310
MULTISTRADA 620 / MULTISTRADA 1100 (06 > 09)
SR311
848 - 1098 - 1198 (07 > 11)
BF08
STREETFIGHTER 1098 (09 > 11)
T682
A781A *
Specific fitting kit for 247N
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
MONSTER 1100 EVO (11) NEW
780FZ
A780
TE7400
7400KIT
Specific kit to install the TE7400 and the T681 without the Monorack
BF09
including fixing kit / it is necessary to remove the small original screen
can be mounted without the Monorack using the 7400KIT / you must
move the indicators from their original position
MULTISTRADA 1200 (10 > 11) NEW
102
SR312
PLXR312
D272ST
BF11
MONOKEY® plate M5 in nylon included / is compatible with the original
side case holder
13/03/12 10.15
CODE
DESCRIPTION
8
NOTE
GILERA
TREND 50
M100K
Minirack kit without plate
RUNNER 50-125-180 (99 > 00)
SR125
RUNNER 50-125-200 (04 > 05)
maximum load allowed 6Kg / use the plate included in the box
GILERA - HARLEY
DAVIDSON - HONDA
E681
RUNNER 50-125-200 (06 > 11)
SR126
it is neccesary to puncture the housing behind the saddle / maximum
load allowed 3 Kg / use the plate included in the box
NEXUS 125 - 250 - 300 - 500 (06 > 11)
E682
E682M
D351ST
TB712
MONOKEY® plate M5 in nylon included / it is neccesary to puncture the
housing behind the saddle / maximum load allowed 6Kg
MONOLOCK® plate M5M in nylon included / it is neccesary to puncture
the housing behind the saddle / maximum load allowed 6Kg
you must puncture the housing in arranged sections / it cannot be
mounted if rack and case are installed
Specific backrest
NEXUS 500 (03 > 04)
E680
E680M
D350ST
housing behind the saddle
the housing behind the saddle
NEXUS 500 (05)
E682
E682M
D350ST
TB712
housing behind the saddle / maximum load allowed 6Kg
the housing behind the saddle / maximum load allowed 6Kg
you must puncture the housing in arranged sections / it cannot be
mounted if rack and case are installed
Specific backrest
FUOCO 500 (07 > 11)
E710
E710M
340D
D340KIT
Specific fitting kit for 340D
GP 800 (08 > 11)
SR127
SR127M
D352ST
TB711
T750
MONOKEY® plate M5 in nylon included / with integrated passenger
grabrails
MONOLOCK® plate M5M in nylon included / with integrated passenger
grabrails
it cannot be mounted if rack and case are installed / you must puncture
the housing in arranged sections
Specific backrest
to be mounted only the specific side-case
103
13/03/12 10.15
CODE
DESCRIPTION
9
NOTE
HARLEY DAVIDSON
SPORTSTER 883-1200 (09 > 11)
TS900
Backrest without luggage carrier
T900
Tubular side holder for soft luggage, chromed
GILERA - HARLEY
DAVIDSON - HONDA
HONDA
BALI 50-100
A94A
only available if article 94A is already fitted
ZOOMER 50 (RUCKUS 50) (04 > 11)
SR28
128A
105A
A303A
8 cm higher than 105A
LEAD 100 (03 > 07)
259A
A259A
LEAD 110 (08 > 11)
314A
A314A
VISION 110 (11) NEW
SR1106
308A
Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)
A1106A
@ 125-150 (00 > 03)
183A
A183A
Screen, transparent 67,9 x 66,5 cm (H x W)
@ 125-150 (04 > 08)
183A
Screen, transparent 67,9 x 66,5 cm (H x W)
CBF 125 (09 > 11)
SR157
317DT
D317KIT
TN457
CBR 125 (05 > 10)
262FZ
104
we recommend mounting smaller cases MONOLOCK® in conjunction
with M5M or M6M plate
13/03/12 10.15
CODE
DESCRIPTION
10
NOTE
CBR 125 R (11) NEW
SR1103
CG 125 TITAN (02 > 04)
25F
only match the plates M3, MM
PCX 125 (10 > 11) NEW
D322ST
Specific screen, trasparent, 59,5 x 44 cm (H x W)
18,5 cm higher than original
D322S
Specific screen, smoked, 59,5 x 44 cm (H x W)
323DT
D323KIT
SC231
Dry-Cool seat cover specific for Honda PCX 125 (11)
GILERA - HARLEY
DAVIDSON - HONDA
maximum load allowed 3 kg / use the plate included in the box / you
must puncture the housing in arranged sections
E231
INNOVA 125 (07 > 11)
SR151
maximum load allowed 3 Kg / use the plate included in the box
DYLAN 125-150 (02 > 07)
SR22
Special rack
128A
102A
A185A
in replacement of original rack
PANTHEON 125-150 (98 > 02)
SR140
D199S *
Special rack
D199ST *
D202ST *
D199KIT
Kit for spoilers D199S, D199ST and 202ST
10 cm higher and larger than D199ST and D199S
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
PANTHEON 125-150 (03 > 08)
E216
D219ST *
Specific rear plate
Specific screen, trasparent 63 x 72,5 cm (H x W)
SH 125-150 (01 > 04)
186A
A186A
TB21
Specific backrest
SH 125I-150I (05 > 08)
E219
311A
313A
A311A
105
13/03/12 10.15
CODE
DESCRIPTION
11
NOTE
SH 125I-150I (11) NEW
E227
P205
Compatible with the following Soft Bags: T467 - T457 - T450 / You have
to mount it on the right side of the scooter
Single tubular side-case holder
311A
313A
A315A
SC227
Dry-Cool seat cover specific for Honda SH 125i / 150i (09 > 11)
S-WING 125-150 (07 > 11)
GILERA - HARLEY
DAVIDSON - HONDA
E224
D312ST
XL 125V VARADERO (01 > 06)
E213
E217
PL173
D215S
®
E213
E217
PL202
D311S
®
CBF 250 (04 > 06)
261FZ
maximum load allowed 6 Kg / we recommend mounting smaller cases
MONOLOCK® in conjunction with M5M or M6M plate
maximum load allowed 6 Kg / we recommend mounting smaller cases
MONOLOCK® in conjunction with M5M or M6M plate
CBF 250 (07 > 08)
264FZ
CBR 250 R (11) NEW
SR1103
CN 250 (89 > 00)
SR13
D182S
FORESIGHT 250 (97 > 08)
SR140
D199S *
Special rack
D199ST *
D202ST *
D199KIT
FORZA 250 (05 > 07)
106
E220
E220M
D306ST
MONOKEY® plate M5 in nylon included / in order to fix you must remove
the original backrest
MONOLOCK® plate M5M in nylon included/ in order to fix you must
remove the original backrest
13/03/12 10.15
CODE
DESCRIPTION
12
NOTE
FORZA 250 X / EX (08 >11)
E226
E226M
315DT
D315KIT
housing behind the saddle / maximum load allowed 6 Kg
the housing behind the saddle / Maximum load allowed 6Kg
SH 300I (07 > 10)
307A
308A
A307A
AF308
GILERA - HARLEY
DAVIDSON - HONDA
E223
SH 300I (11) NEW
E223
307A
308A
A1100A
AF1100
SC1100
Dry-Cool seat cover specific for Honda SH300 (11)
SILVER WING 400 (06 > 09)
MONOKEY® plate M5 in nylon included / you must puncture the original
case holder
original case holder
SR19
SR19M
214DT
D214KIT
AF214
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 57 cm (12 cm of extension) width 59cm
TB19
Specific backrest
it can be mounted with the SR19 / SR19M
SW-T 400 - 600 (09 > 11)
case holder
SR19
SR19M
D318ST
Specific screen, transparent, 89 x 67 cm (H x W)
D318B
Specific sports screen 52 x 49 cm (H x W)
AF318
TB19
Specific backrest
T222
18 cm higher than the original
CB 500 (94)
241F
CB 500 (97 > 05) / CB 500S (00 > 05)
250F
260FZ
original sidecase holder
PL174
PLX174
PLXR174
CBF 500 (04 > 11)
you can mount only V35 MONOKEY® SIDE CASES / can be mounted
without the Monorack using the PLX174KIT
without the Monorack
107
13/03/12 10.15
CODE
DESCRIPTION
PLX174KIT
NOTE
T218
TN450
13
compatible from ’05 to ’06
CB 600 F HORNET / S (98 > 02)
162FZ
T214
CB 600 F HORNET (03 > 06)
GILERA - HARLEY
DAVIDSON - HONDA
258FZ
PL172
A305
A756A900
®
T214
Specific screen with fitting kit, matt silver - standard 36 x 45 cm (H x W)
is mounted in conjuction with Monorack
including fixing kit / it can be installed without taking off the original light
fairing / compatible from ’05 to ’06
CB 600 F HORNET / HORNET ABS (07 > 10)
only match the plates M5, M5M, M6M / you need to remove the handle
bar of the scooter to install it
you can mount only V35 MONOKEY® SIDE CASES / is mounted in
conjuction with Monorack
263FZ
PLX176
A309
including fixing kit / only for CB 600 F Hornet
A310
including fixing kit / only for Hornet ABS
T219
TN453
TE1107
BF03
CBF 600S/ CBF 600N (04 > 11)
260FZ
PL174
PLX174
PLXR174
PLX174KIT
D303ST
T218
12,5 cm higher than original / only for faired models
we recommend fitting by a qualified mechanic / compatible with all
years ’07
TN456
we recommend fitting by a qualified mechanic / compatible from ’08
BF03
TN369
CBR 600 F (97 > 98)
249F
it cannot be mounted with T208 / only match the plates M3, MM
CBR 600 F (99 > 09)
252F
D213S
compatible with model ’01
CBR 600 F (11) NEW
108
1102FZ
1102KIT
Specific kit to install the TE1102 and PLX1102 without the Monorack
PLX1102
1105D
without the Monorack using the 1102KIT
5,5 cm higher than the original
13/03/12 10.15
CODE
DESCRIPTION
D1105KIT
TE1102
BF03
14
NOTE
can be mounted without the Monorack using the 1102KIT
CBR 600 FS (01 > 02)
D213S
CBR 600 RR (05 > 06)
BF03
GILERA - HARLEY
DAVIDSON - HONDA
CBR 600 RR (07 > 09)
BF03
HORNET 600 (11) NEW
1102FZ
PLX1102
A1102
TE1102
1102KIT
Specific kit to install the TE1102 and PLX1102 without the Monorack
TN453
BF03
®
SILVER WING 600 / ABS (01 > 09)
SR19
SR19M
214DT
case holder
D214KIT
AF214
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 57 cm (12 cm of extension) width 59cm
TB19
Specific backrest
VT 600 C SHADOW (89 > 01)
TS800
Backrest with detachable small luggage carrier
XL 600 RM/LM
E200
XL 600 V TRANSALP (88)
E200
XL 600 V TRANSALP (89 > 93)
E200
D180S
TN363
E200
PL131
D205S
D191S
TN363
10 cm higher than D191S
109
13/03/12 10.15
CODE
DESCRIPTION
15
NOTE
PL131
D205S
D191S
TN363
10 cm higher than D191S
NT 650 V DEAUVILLE (98 > 05)
GILERA - HARLEY
DAVIDSON - HONDA
SR15
SR15M
Special rack for MONOLOCK boxes
D201S
MONOLOCK® plate MM in aluminium included
®
DOMINATOR 650 (< 92)
E200
DOMINATOR 650 (92 > 94)
E200
185D
D185KIT
only with spoiler
DOMINATOR 650 (95)
185D
D185KIT
only with spoiler
DOMINATOR 650 (96 > 02)
D185KIT
XL 650V TRANSALP (00 > 07)
E213
PL167
D209S
T213
TN366
You must move from there original position
it can be mounted with the specific plate
we recommend fitting by a qualified mechanic / mount with central
tripod mounted
DN-01 700 (08 > 11)
265FZ
PLX204
D316S
only match the plates M5, M5M, M6M / maximum load allowed 6 Kg
®
INTEGRA 700 (12) NEW
sidecase holder
1108FZ
1109FZ
PLX1109
PL1109
TE1109
1109KIT
Specific kit to install the PLX1109 / PL1109 / TE1109 without the Monorack
®
NC700X (12) NEW
110
1111FZ
TE1111
1111KIT
Specific kit to install the TE1111 without the Monorack
13/03/12 10.15
CODE
DESCRIPTION
16
NOTE
NT 700 DEAUVILLE (06 > 11)
E221
E221M
D307ST
BF03
MONOKEY® plate M5 in nylon included/ for fixing the original lid must
be drilled
MONOLOCK® plate M5M in nylon included/ for fixing the original lid
must be drilled
XL 700V TRANSALP (08 > 11)
E225M
PL203
D313S
T221
TN455
BF03
®
GILERA - HARLEY
DAVIDSON - HONDA
E225
it can be mounted also without the specific plate
AFRICA TWIN 750 (90 > 92)
E200
D181S
only with spoiler
E210
D188S
TN362
we recommend fitting by a qualified mechanic / only for ’95
E210
PL148
D195S
TN362
BLACK WIDOW 750 (00 > 02)
A23
Universal screen, 38,8 x 41 cm (H x W)
A35N
Universal screen, 54,9 x 46,8 cm (H x W)
AS100A2
Specific fitting kit for A23 and A35N
A41N
high and shaded bottom version
A42
low, transparent version
AS300A2
Specific fitting kit for A41N and A42
CB 750 SEVEN FIFTY (92 > 00)
232F
VFR 750 F (90 > 93)
229F
VFR 750 F (94 > 97)
242F
VT 750S (10 > 11)
A35
111
13/03/12 10.15
CODE
DESCRIPTION
17
NOTE
A23
AS122A2
Specific fitting kit for A35 and A23
T223
Tubular side holder for soft luggage, chromed
TS808
Backrest with detachable small luggage carrier, chromed
VT SHADOW 750 (04 > 11)
GILERA - HARLEY
DAVIDSON - HONDA
A23
Universal screen, transparent 38,8 x 41 cm (H x W)
A41N
AS121A2
T216
TS806
VT SHADOW SPIRIT 750 (07 > 10)
A23
A35N
AS100A2
A41N
A42
AS300A2
T220
TS807
mounting is only possible with TS807
CROSSRUNNER 800 (11) NEW
1104FZ
PLXR1104
PLX1104
1104KIT
Specific kit to install the PLX1104 without the Monorack
1104DT
D1104KIT
®
you must move the indicators from their original position / you can
mount only V35 MONOKEY® SIDE V35
you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the
Monorack using the 1104KIT / you must move the indicators from their original
VFR 800 (98 > 01)
only match the plates M5, M5M, M6M / you must remove the grabrails,
they are reproduced by the rack itself
257FZ
PL257
D200S
VFR 800 VTEC (02 > 11)
original sidecase holder / reinforced version
166FZ
PL166
PLX166
PLXR166
D217S
BF03
®
CB 900 HORNET (02 > 07)
256FZ
PL256
A257A *
Specific fitting kit for 240A, 240BL and 240N902
®
112
13/03/12 10.15
CODE
DESCRIPTION
18
NOTE
CB 1000 R (08 > 11)
266FZ
A312A *
Specific fitting kit for 247A and 247N
A1101A *
compatible from ’11
TE1101
1101KIT
BF03
GILERA - HARLEY
DAVIDSON - HONDA
CBF 1000 / ABS (06 > 09)
260FZ
PL174
PLX174
PLXR174
PLX174KIT
D303ST
T218
TN452
BF03
CBF 1000 / CBF 1000 ST (10 > 11)
SR777
SR777M
PLXR208
PL208
777KIT
Specific kit to install the PLXR without the plate
D320ST
TN460
BF03
MONOKEY® plate M5 in nylon included / you must remove the grabrails, they are
reproduced by the rack itself / is compatible with the original side case holder
MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they
are reproduced by the rack itself / is compatible with the original side case holder
you can mount only V35 MONOKEY® SIDECASES / mounting is only
possible with SR777 / SR777M or 777KIT
15 cm higher than original / adjustable as the original
CBR 1000 F (89 > 92)
227F
Y155
Specific wingrack fitting kit
only with chassis N141
CBR 1000 F (93 > 00)
227F
Y155
CBR 1000 RR (06 > 07)
D308SP
Protective deflector
above applies to the original spoiler for increased protection
CBR 1000 RR (08 > 09)
BF03
VTR 1000 F (97 > 04)
251F
E212
113
13/03/12 10.16
CODE
DESCRIPTION
PL164
D203S
D203ST
TN365
19
NOTE
®
XL 1000V VARADERO / ABS (03 > 06)
GILERA - HARLEY
DAVIDSON - HONDA
E212
PL170
D300S
D300ST
TN367
to be mounted using original bolts
XL 1000V VARADERO / ABS (07 > 11)
E222
PL177
PLX177
D300S
D300ST
TN454
®
we recommend fitting by a qualified mechanic / compatible with all
years ’10
CBR 1100 XX (97 > 09)
248F
Y158
DH196
ST 1100 PAN EUROPEAN
E190
Specific rear plate
D184S
CROSSTOURER 1200 (12) NEW
SR1110
SRA1110
the remote control device on the case / to be mounted on the original case carrier
VFR 1200 F (10 > 11)
267FZ
PLX209
267KIT
D321S
BF03
only match the plates M5, M5M, M6M / A larger grab rail for the passenger is included,
you must remove the original grab rails / is compatible with the original side case holder
CB 1300 / CB 1300 S (03 > 09)
259FZ
TN451
CB 1300 S (10 > 11)
114
268FZ
D324S
TN451
TE224
13/03/12 10.16
CODE
DESCRIPTION
20
NOTE
PAN EUROPEAN ST 1300 (02 > 11)
E215
GOLD WING 1800 (01 > 10)
D319ST
Specific screen, transparent, 82 x 72 cm (H x W)
20 cm higher than the original / Without the frontal loophole for the
original grill
KAWASAKI
ER 5 500 (98 > 00)
432F
ER 5 500 (01 > 07)
440F
425F
KAWASAKI - KEEWAY
KTM - KIMCO - LML
GPZ 500 S (94 > 03)
ER 6N / ER 6F 650 (05 > 08)
445FZ
PLX445
D404S *
maximum load allowed 6 kg / only match the plate M5M or M6M
®
A445A
Specific fitting kit for 245N, 246G730 and 246N902
T262
BF04
you can mount only V35 MONOKEY® SIDE CASES/ is mounted in conjuction
with Monorack / you must move the indicators from their original position
8,5 cm higher than the original / for faired version
it requires the fitting of 245N painted black internally as not to reflect the
light / not for faired version
ER-6N / ER-6F 650 (09 > 11)
449FZ
PLX449
PLX449KIT
A448A *
D409S
TE266
BF04
you need to remove the handle bar of the scooter to install it
®
you can mount only V35 MONOKEY® SIDE CASES / original grabrails should
be removed / can be mounted without the Monorack using the PLX449KIT
only for 6N models
6 cm higher than original / only for ER-6F
ER-6N / ER-6F 650 (12) NEW
4104FZ
PLX4104
A4104
including fixing kit / only for ER-6N
D4104S
10 cm higher than original / only for ER-6F
TE4104
BF04
ZZR 600 (93 > 01)
423F
D166S
115
13/03/12 10.16
CODE
DESCRIPTION
21
NOTE
KLR 650 ENDURO (07 > 11)
E581
E581M
PL448
408D
Specific screen, smoked 540 x 350 mm (H x W)
D408KIT
TN421
VERSYS 650 (06 > 09)
447FZ
PL447
PLX447
PLX447KIT
D405ST
only match the plates M5, M5M, M6M / including fixing kit
can be mounted without the Monorack using the PLX447KIT
®
®
VERSYS 650 (10 > 11)
KAWASAKI - KEEWAY
KTM - KIMCO - LML
451FZ
PLR450
PLXR450
450KIT
Specific kit to install the PLR and the PLXR without the Monorack
D410ST
®
TN422
TE4103
BF04
you can mount only V35 MONOKEY® SIDECASES / can be mounted without the
Monorack using the 450KIT / you must move the indicators from their original position
ZR 7 / ZR 7 S 750 (99 > 04)
436F
Z 750 (04 > 06)
443FZ
402D
D402KIT
T263
Z 750 S (05 > 07)
444FZ
only match the plates M5, M5M, M6M / maximum load allowed 6 Kg /
you must move from there original position
Z 750 (07 > 11)
448FZ
A446
TE265
T265KIT
Specific fitting kit for tubular holder
BF04
can be mounted without the Monorack using the T265KIT / you must
VN 800 CLASSIC (96 > 02)
A36
A37N
TS835
116
Backrest without luggage carrier
low and transparent version / only available if article AS126A2 is
already fitted
high and shaded bottom version / only available if article AS126A2 is
already fitted
13/03/12 10.16
CODE
DESCRIPTION
22
NOTE
W 800 (11) NEW
SR4101
Special rack
PL4101
A4101
TN4101
TN4101CR
Specific engine guard, chromed
VN 900 CUSTOM / CLASSIC (06 > 11) NEW
PL4102
A36
low and transparent version / only for Classic version
A37N
high and shaded bottom version / only for Classic version
AS128A2
A23
A35N
Universal screen, transparent 54,9 x 46,8 cm (H x W)
AS100A2
A42
low, transparent version / only for Custom version
A41N
high and shaded bottom version / only for Custom version
AS300A2
TS836
T264
only for Classic version
low, transparent version / only for Custom version
high and shaded bottom version / only for Custom version
KAWASAKI - KEEWAY
KTM - KIMCO - LML
only for Custom version
only for Custom version
GTR 1000
E128
D74S
only with spoiler
KLV 1000 (04 > 10)
E528
E528M
PL528
PLX528
®
compatible with models ’04 / 18 cm higher than original / only with
spoiler
D260ST
AF260
TN528
VERSYS 1000 (12) NEW
SR4105
SR4105M
SRA4105
PLR4105
PLXR4105
MONOKEY® plate E250 in nylon included
the remote control device on the case / to be mounted on the original case carrier
D4105ST
AF4105
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 52 cm (12 cm of extension), width 48 cm
TN4105
BF04
Z 1000 (03 > 06)
442FZ
D401S
117
13/03/12 10.16
CODE
DESCRIPTION
23
NOTE
Z 1000 (07 > 09)
448FZ
A447
Specific screen, smoked cm 34 x 34 cm (H x W)
you must move from there original position
including the kit to specific attachments
Z 1000 (10 > 11)
450FZ
T267
T267KIT
Specific fitting kit for tubular holder
A449
BF04
can be mounted without the Monorack using the T267KIT
Z 1000 SX (11) NEW
KAWASAKI - KEEWAY
KTM - KIMCO - LML
4100FZ
PLXR4100
4100KIT
Specific kit to install the PLXR4100 without the Monorack
4100D
D4100KIT
TE4100
BF04
you can mount only V35 MONOKEY® SIDECASES / can be mounted
ZRX 1100 / ZRX 1100 S (97 > 01)
433F
D174S
maximum load allowed 6 Kg / only match the plates M3, MM
for faired version
ZZR 1100 (93 > 01)
422F
441FZ
only match the plates M5, M5M, M6M / you must remove the grabrails,
they are reproduced by the rack itself
PL441
ZZR 1200 (02 > 05)
ZRX 1200 (02)
433F
433F
D174S
ZRX 1200 R (02)
for faired version
ZRX 1200 S (01 > 02)
433F
GTR 1400 (07 > 11)
SR410
D407ST
8,5 cm higher than original (07 > 09) / 2,5 cm higher than original (10)
ZZR 1400 / ZX 14 (06 > 11)
PLX446
D406S
118
13/03/12 10.16
CODE
DESCRIPTION
24
NOTE
KEEWAY
GOCCIA 50 (09 > 11)
E851
107A
A851A
RY6 50 (10 > 11)
SR852
288A
A853A
Specific fitting kit, black for 288A
RY8 50 EVO SPORT (10 > 11)
288A
A288A
KAWASAKI - KEEWAY
KTM - KIMCO - LML
SR852
OUTLOOK 125-150 (09) NEW
120A
121A
A850A
KTM
DUKE 125 (11) NEW
SR7701
A7701A *
BF12
ADVENTURE 950 / 990 (03 > 11)
E650M
SR7700
Special rack for MONOKEY boxes
PL650
®
990 SMT (09 > 11)
SRA750
PLR750
D750S
119
13/03/12 10.16
CODE
DESCRIPTION
25
NOTE
KYMCO
AGILITY 50-125-150 R16 (08 > 11)
E137
440A
441A
A440A
DINK 50-125-200I (06 > 11)
SR90
292DT
D292KIT
37 cm higher the original
LIKE 50-125-200I (09 > 12)
E138
KAWASAKI - KEEWAY
KTM - KIMCO - LML
6102A
A6102A
442A
Specific screen, transparent. 52 x 66.6 cm (H x W)
A442A
PEOPLE S 50-125-200 (05 > 11)
137A
A137A
B&W 125-150 (00 > 06)
102A
only available if article A135A is already fitted
128A
DOWNTOWN 125I-300I (09 > 11)
SR92
SR92M
TB82
Specific backrest
D294ST
Specific screen, transparent 81.5 x 64 cm (H x W)
MONOKEY® plate M5 in nylon included / maximum load allowed 6 kg
it cannot be mounted if rack and case are installed
DINK CLASSIC 125-150 (97 > 06)
SR80
132A *
A132A
it requires fitment of cases up to 42 ltr
GRAND DINK 125-150-250 (00 > 07)
SR87
SR87M
®
290DT
D290KIT
G-DINK 125-300 (12) NEW
SR6101
120
13/03/12 10.16
CODE
DESCRIPTION
26
NOTE
PEOPLE GTI 125-300 (10 > 11)
E139
443A
Specific screeen, transparent 53 x 72 cm (H x W)
A443A
PEOPLE 250 (04 > 05)
A45
Specific screen, transparent 60, 5 x 69,5 cm (H x W)
XCITING 250-300-500 (05 > 09)
SR89
SR89M
D293ST
TB80
Specific backrest
®
XCITING R 300I-500I (09 > 11)
SR91
SR91M
TB81
Specific backrest
D295ST
Specific screen, transparent 85.5 x 66 cm (H x W)
AF295
MYROAD 700 (11) NEW
SR6100M
®
MBK - MOTO GUZZI
MOTOMORINI - PEUGEOT
SR6100
LML
STAR 125-150 (09 > 11)
642F
SR642
642A
A642A
®
MBK
OVETTO 50-100 (97 > 02)
SR86
SR366
105A
128A
A285A
OVETTO 50 (08 > 11)
121
13/03/12 10.16
CODE
DESCRIPTION
27
NOTE
CITYLINER 125 (07 > 11)
SR361
D439ST
Specific screen, transparent with serigraphy 71 x 77 cm (H x W)
FLAME X 125 (07 > 11)
SR354
102A
128A
A283A
SKYCRUISER 125 (05 > 09)
SR355
SR355M
D438ST
TB49
Specific backrest
you must puncture the housing in arranged sections / MONOKEY® plate
M5 in nylon inlcuded
you must puncture the housing in arranged sections / use the plate
included in the box
25,5 cm higeher than original
SKICRUISER 125 (10 > 11)
SR370
SR370M
TB55
Specific backrest
446DT
maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it
is neccesary to puncture the housing behind the saddle
maximum load allowed 6 kg / it is neccesary to puncture the housing
behind the saddle / use the plate included in the box
MBK - MOTO GUZZI
D446KIT
AF446
D446B
SKYLINER 125-150 (99 > 00)
SR43
Special rack
SKYLINER 125-150 CAT. (01 > 11)
SR46
SR46M
130DT
D130KIT
WAAP 125 (10 > 11)
SR373
288A
A289A
SKYLINER 250 (00 > 07)
SR44
SR44M
®
D124ST *
with air intake
D127ST *
without moulding steel / without a hole for the air
* THE ITEM IS SOLD IN PACKS OF THREE PIECES EACH
KILIBRÈ 300 (03 > 07)
D432ST
TB50
122
Specific backrest
13/03/12 10.16
CODE
DESCRIPTION
28
NOTE
MOTO GUZZI
BREVA 750 (03 > 11)
703F
M3, MM
BREVA 850-1100-1200 (05 > 11)
SR210
SR210M
is compatible with the original side case holder / MONOKEY® plate M5
in nylon included
is compatible with the original side case holder / MONOLOCK® plate
M5M in nylon included
NORGE 850-1200 (06 > 11)
SR210
SR210M
in nylon included
is compatible with the original side case holder / MONOLOCK® plate
M5M in nylon included
STELVIO 1200 (08 > 11)
E708
E708M
PL708
®
D610ST
13 cm higher than original / 13 cm più alto dell’originale / compatible
from ’08 to ’10
MOTO MORINI
SR780
SR780M
®
MBK - MOTO GUZZI
GRANPASSO 1200 (08 > 11)
PEUGEOT
TWEET 50-125-150 (10 > 11)
107A
A299A
LXR 125-200 (09 > 11)
105A
128A
A291A
A298A
GEOPOLIS 125-250-400 (07 > 11)
SR63
SR64
maximum load allowed 6 Kg / use the plate included in the box / only
for 250 cc. version.
maximum load allowed 6 kg / use the plate included in the box / only for
400 cc. version.
SV 250 (02)
SR140
D199S *
D199ST *
Special rack
123
13/03/12 10.16
CODE
DESCRIPTION
D202ST *
D199KIT
29
NOTE
PIAGGIO
FLY 50-100-125-150 (04 > 11)
SR104
107A
A110A
GRILLO 50
M150K
Minirack kit without plate
LIBERTY 50-125-150-200 (02 > 08)
SR103
Specific plate for MONOLOCK® boxes
E342
107A
A107A
®
only for 125-150-200 cc version / use the plate included in the box
maximum load allowed 3 Kg / it requires fitment of cases up to 30 ltr
LIBERTY S 50-125-200 (06 > 11)
PIAGGIO - SUZUKI
SYM - TRIUMPH
SR107
it is necessary to remove the original grab handle / maximum load
allowed 3 kg / use the plate included in the box
LIBERTY 50-125-150 (09 > 11)
SR132
E342
107A
A107A
SC132
Dry-Cool seat cover specific for Piaggio Liberty 50-125-150 (09 > 11)
®
maximum load allowed 3 Kg / it requires fitment of cases up to 30 ltr
TYPHOON 50-125 (11)
SR5602
288A
A5602A
VESPA LX 50-125-150 (05 > 11)
SR105
104A
A104A
VESPA S 50-125-150 (07 > 11)
SR105
124
355A
354A
A354A
with fantasy serigraphy
13/03/12 10.16
CODE
DESCRIPTION
30
NOTE
ZIP 50-125 (00 > 11)
SR56
Special rack
BEVERLY 125-200 (01 > 04)
E341
maximum load allowed 6 kg
BEVERLY 125-250-400 (04 > 07)
E341
maximum load allowed 6 kg / only for ’04 version
E344
maximum load allowed 6 kg / compatible from model ’05
A350A
Specific fitting kit for 113A, 113AS and 114AS
only available if article 113A, 113AS or 114AS is already fitted
BEVERLY TOURER 125-250-300-400 (08 > 10)
E344
103A
A103A
106A
A106A
BEVERLY 125IE-300IE (10 > 11)
E349
357A
A357A
358A
A358A
E109B
Polyurethane backrest, brown, specific for Monolock® top-cases E370
CARNABY 125-200-250 (07 > 11)
E347
113ASF
MP3 125-250-300-400 (06 > 11)
“Folding” specific plate for MONOKEY® boxes
SR134M
“Folding” specific plate for MONOLOCK® boxes
SR108
SR108M
D501ST *
D502S
D504ST
AF504
TB106
MONOKEY® plate M5 in nylon included / complete with polyurethane backrest / Allows
hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg
PIAGGIO - SUZUKI
SYM - TRIUMPH
SR134
MONOLOCK® plate M5M in nylon included / complete with polyurethane backrest / Allows
complete with polyurethane backrest / MONOKEY® plate M5 in nylon / in order to
fix you must remove the original backrest / maximum load allowed 6 kg
complete with polyurethane backrest / MONOLOCK® plate M5M in nylon / in order
to fix you must remove the original backrest / maximum load allowed 6 kg
40 cm higher than original (06-08 Model) / 24 cm higher than original
(09 Model)
16 cm higher than original (06>08 model) / The same height as the
original (09 model)
32 cm higher than original (06>08 model) / 16 cm higher than original
09 model)
Specific backrest
MP3 YOURBAN 125-300 (11) NEW
SR5600
SR5600M
SR5600MM
maximum load allowed 6 kg / MONOLOCK® plate M6M in nylon
included
5600DT
D5600KIT
®
®
125
13/03/12 10.16
CODE
DESCRIPTION
31
NOTE
AF5600
D5600ST
TB5600
Specific backrest
VESPA PX 125-150-200
642F
VESPA PX 125-150 (11 > 12) NEW
SR5603
642A
A5603A
VESPA 125-200 GRANTURISMO (03 > 08)
104A
A104A
X7 125-250 (08 > 11)
SR109
SR109M
D503ST
MONOKEY® plate M5 in nylon included / it is neccessary to drill the
handle and mudguard / maximum load allowed 6 kg
it is neccessary to drill the handle and mudguard / maximum load
allowed 6 kg / use the plate included in the box
X7 EVO 125I-300I (09 > 10)
SR133
D503ST
X8 125-150-200-250-400 (04 > 10)
SR102
SR102M
D500ST
X9 125-180-250 (00 > 02)
PIAGGIO - SUZUKI
SYM - TRIUMPH
SR54
SR54M
MONOLOCK® plate MM in nylon included
SR57
D227ST
TB54
®
for 250 cc version / only till years ’01
Specific backrest
X-EVO 125-250-400 (07 > 11)
SR102
SR102M
D500ST
®
X9 200-250-500 EVOLUTION (03 > 08)
126
SR54
SR54M
SR57
D229ST
TB54
Specific backrest
®
13/03/12 10.16
CODE
DESCRIPTION
32
NOTE
BEVERLY CRUISER 250 - 500 (07 > 11)
E345
E345M
352A
Specific screen, transparent with serigraphy 50,5 x 78,5 cm (H x W)
A352A
TB105
MONOKEY® plate M5 in nylon included / Maximum load allowed 6 Kg
Specific backrest
VESPA GTS 250 (06 > 11)
104A
A104A
CARNABY CRUISER 300 (09 > 11)
E348
356A
A352A
MP3 TOURING 300 - 400 (11) NEW
SR134
“Folding” specific plate for MONOKEY® boxes
SR134M
“Folding” specific plate for MONOLOCK® boxes
SR108
SR108M
MONOKEY® plate M5 in nylon included / complete with polyurethane backrest / Allows
MONOLOCK® plate M5M in nylon included / complete with polyurethane backrest / Allows
complete with polyurethane backrest / MONOKEY® plate M5 in nylon / in order to
fix you must remove the original backrest / maximum load allowed 6 kg
complete with polyurethane backrest / MONOLOCK® plate M5M in nylon / in order
to fix you must remove the original backrest / maximum load allowed 6 kg
D5601ST
AF5601
VESPA GTS 300 SUPER (08 > 11)
SR131
104A
A104A
SC131
Dry-Cool seat cover specific for Piaggio Vespa GTS 300 Super (08 > 11)
E341
maximum load allowed 6 kg / compatible with ’03 and ’04
E344
maximum load allowed 6 kg / compatible from ’05
103A
A103A
106A
A106A
®
PIAGGIO - SUZUKI
SYM - TRIUMPH
BEVERLY 500 (03 > 07)
X9 500 (01 > 02)
SR54
SR54M
SR57
TB54
Specific backrest
®
127
13/03/12 10.16
CODE
DESCRIPTION
33
NOTE
SUZUKI
SIXTEEN 125-150 (08 > 11)
E532
169A
Specific screen, transparent with serigraphy 56,5 x 71,5 cm (H x W)
A169A
UH 125-150 BURGMAN (02 > 05)
SR114
D256ST
use the plate included in the box / maximum load allowed 4 kg
BURGMAN 125-200 K7-K8-K9-L0 (06 > 11)
SR118
SR117M
267DT *
D267KIT *
D268ST
TB533
Specific backrest
included in the box
MONOLOCK® plate M5M in nylon included / you must remove the grabrails,
they are reproduced by the rack itself / maximum load allowed 3 kg
33 cm higher the original
AN 250-400 BURGMAN (98 > 02)
SR111
SR111M
156D *
156DT *
D156KIT *
Specific fitting kit for 156D and 156DT
AN 250-400 BUSINESS (01 > 03)
PIAGGIO - SUZUKI
SYM - TRIUMPH
SR112
156D *
156DT *
D156KIT *
Specific fitting kit for 156D and 156DT
AN 250-400 BURGMAN (03 > 06)
SR115
D258ST
TU 250X (97 > 04)
A601
Universal screen with 2 point handlebar, bronzè 36,9 x 42,5 cm (H x W)
AN 400 BURGMAN TYPE-S (05)
D258ST
BURGMAN 400 K7-K8-K9 (06 > 11)
128
E531
E531M
266DT
D266KIT
MONOKEY® plate M5 in nylon included/ it is neccesary to puncture the
housing behind the saddle
MONOLOCK® plate M5M in nylon included/ it is neccesary to puncture
the housing behind the saddle
13/03/12 10.16
CODE
DESCRIPTION
AF266
NOTE
TB531
TB532
34
Specific backrest
it can be mounted only if rack and case are installed
Specific backrest
GS 500 E (97 > 00)
524F
GS 500 E (01 > 07) / GS 500 F (04)
526F
GSF 600 BANDIT / S (96 > 99)
511F
TN392
GSF 600 BANDIT / S (00 > 04)
522F
PL522
D252S
TN392
for faired version
GSR 600 (06 > 11)
SR116
SR116M
PLX538
A167A *
Specific fitting kit for 245A, 245N and 246_ _ _
A170A *
T255
TN535
BF01
MONOKEY® plate M5 in nylon included/ you must remove the grabrails /
MONOLOCK® plate M5M in nylon included / you must remove the
grabrails / maximum load allowed 6 kg
you can mount only V35 MONOKEY® SIDE CASES/ mounting is only
possible with SR116 / SR116M
it requires the fitting of 245N painted black internally as not to reflect the
light / compatible with ’06 and ’07
compatible only with ’08 model
to be mounted only with SR116 / SR116M
518F
PIAGGIO - SUZUKI
SYM - TRIUMPH
GSX 600 F (98 > 02)
GSX 600 F (03 > 06)
530FZ
GSX R 600 / 750 (08 > 10)
BF01
AN 650 BURGMAN EXECUTIVE (02 > 11)
E529
E529M
D257ST
D263ST
the rack cannot be mounted in conjunction with the TB529 / MONOKEY®
plate M5 in nylon / in order to fix you must remove the original backrest
the rack cannot be mounted in conjunction with the TB529 / MONOLOCK®
plate M5M in nylon / in order to fix you must remove the original backrest
compatible with all years ’04
for models having electrically adjustable screen / compatable from ’05
DL 650 V-STROM (04 > 11)
E528
E528M
PL532
129
13/03/12 10.16
CODE
DESCRIPTION
35
NOTE
PLR532
PLX532
D260ST
AF260
Specific sliding wind-screen for, transparent, complete with fitting kit. Maximum height 65 cm (12 cm of extension) width 44 cm
TN532
BF10
®
18 cm higher than original / only with spoiler
DL 650 V-STROM L2 (11 > 12) NEW
SR3101
SR3101M
SRA3101
Special rack in aluminium for Monokey cases, black
PL3101
PLR3101
PLX3101
AF3101
Specific sliding wind-screen , transparent, complete with fitting kit. Maximum height 56 cm (12 cm of extension) width 43 cm
3101DT
D3101KIT
TN532
RP3101
Oil carter protector in Aluminium
BF01
MONOKEY® plate E250 in nylon included
®
GLADIUS 650 (09 > 11)
MONOKEY® plate M5 in nylon included / you must remove the grabrails,
MONOLOCK® plate M5M in nylon included / you must remove the grabrails,
SR121
SR121M
PLX540
A172
A172S
Specific screen, black and grey 29,5 x 30,5 cm (H x W)
T256
BF01
GSF 650 BANDIT / BANDIT S / BANDIT ABS (05 > 06)
PIAGGIO - SUZUKI
SYM - TRIUMPH
539FZ
PL534
Tubular pannier holder for MONOKEY
D262S
you must move from there original position / only for version without
ABS
®
Specific screen, smoked 45,7 x 3,6,5 cm (H x W)
11,7 cm higher than original / for semi faired version
GSF 650 BANDIT / GSF 650 BANDIT S K7-K8 (07 > 11)
539FZ
PL539
PLX539
A168A
D262S
TN539
®
you can mount only V35 MONOKEY® SIDE CASES / you must move
the indicators from their original position
it will be necessary to remove the original painted trim above the headlight / it
requires the fitting of 245N painted black internally as not to reflect the light
* IMPORTANT: SINCE 2009 IN SOME COUNTRIES IS AVAILABLE THE MODEL BANDIT K9, WHILE IN SOME OTHER COUNTRIES IS STILL SOLD THE PREVIOUS MODEL K7-K8.
GSF 650 BANDIT / GSF 650 BANDIT S K9 (09 > 11)
540FZ
PLXR541
BF01
®
you must move the indicators from their original position / you can mount only V35
MONOKEY® SIDECASES® SIDE V35 / can be mounted without the Monorack
* IMPORTANT: SINCE 2009 IN SOME COUNTRIES IS AVAILABLE THE MODEL BANDIT K9, WHILE IN SOME OTHER COUNTRIES IS STILL SOLD THE PREVIOUS MODEL K7-K8.
130
13/03/12 10.16
CODE
DESCRIPTION
36
NOTE
GSX 650F (08 > 11)
539FZ
PL539
PLX539
D270S
BF01
®
SV 650 / SV 650 S (99 > 02)
521FL
only match the plate M35
SV 650 / SV 650 S (03 > 08)
529FZ
517F
TN392
GSX 750 (98 > 02)
GSX 750 F (98 > 02)
518F
3100FZ
only match the plates M5, M11, M5M, M6M
A3100
GSX 750 F (03 > 06)
530FZ
GSR 750 (11) NEW
TE3100
3100KIT
BF01
VS 800 INTRUDER
Specific screen, bronze 37,1 x 39,2 cm (H x W)
PIAGGIO - SUZUKI
SYM - TRIUMPH
A10
DL 1000 V-STROM (02 > 11)
E528
E528M
PL528
PLX528
D255ST
®
only with spoiler / 16 cm higher than original / compatable from ’02
to ’03
D260ST
AF260
TN528
BF10
18 cm higher than original / only with spoiler / compatible from year ’04
compatible from year ’04
SV 1000 / SV 1000 S (03 > 08)
529FZ
GSX 1200 (98 > 02)
517F
131
13/03/12 10.16
CODE
DESCRIPTION
37
NOTE
GSF 1200 BANDIT (96 > 99)
511F
GSF 1200 BANDIT / BANDIT S (00 > 05)
522F
PL523
D252S
You must move from there original position
only for faired version
GSF 1200 BANDIT / BANDIT S (06)
539FZ
D262S
GSF 1250 BANDIT / BANDIT S (07 > 11)
539FZ
PL539
PLX539
A168A
D262S
®
it requires the fitting of 245N painted black internally as not to reflect
the light
GSX 1300R HAYABUSA (08 > 11)
541FZ
only match the plates M5, M5M, M6M / A larger grab rail for the passenger is
included, you must remove the original grab rails / maximum load allowed 6 Kg
GSX 1400 (02 > 09)
527FZ
PL527
Tubular pannier holder for MONOKEY
TN394
®
mounting is only possible with Monorack arms / compatible with models
from ’02 to June ’05
we recommend fitting by a qualified mechanic / compatible with models
from July ’05
SYM
PIAGGIO - SUZUKI
SYM - TRIUMPH
FIDDLE II 50-125 (09 > 11)
293A
A293A
SYMPHONY 50-125-151 (09 > 11)
E292
294A
296A
A294A
Only for 50 cc. version
A295A
Only for 125 cc. version
107A
A299A
SYMPHONY SR 50-125-151 (10 > 11)
132
297A
A297A
13/03/12 10.16
CODE
DESCRIPTION
38
NOTE
SYMPLY 125 (08 >09)
105A
128A
JOYRIDE 125-150-200 (01 > 08)
SR99
Special rack
JOYRIDE EVO 125-200 (09 > 11)
SR233
SR233M
D651ST
15,5 cm cm higher than original
HD 125-200 (05 > 07)
105A
128A
8 cm higher than 105A / only available if article A290A is already fitted
HD EVO 125-200 (07 > 11)
E291
105A
128A
A291A
A298A
HD2 125-200 (11) NEW
128A
105A
A7050A
SR230
Special rack
SR232
PIAGGIO - SUZUKI
SYM - TRIUMPH
JOYMAX 250 (05 > 08) / JOYMAX EVO (09 > 11)
CITYCOM 300 (08 > 11)
SR231
SR231M
D650ST
MONOKEY® plate M5 in nylon included / you must puncture the housing
in arranged sections
included in the box
MAXSYM 400 (11) NEW
SR7051
SR7051M
7051DT
D7051KIT
133
13/03/12 10.16
CODE
DESCRIPTION
39
NOTE
TRIUMPH
STREET TRIPLE 675 (07 > 11)
727FZ
TN226
TE705
BF02
BONNEVILLE 865
SR226
Special rack, chromed
TIGER 800 / TIGER 800 XC (11) NEW
SR6401
SRA6401
PLR6401
6401DT
maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the
remote control device on the case / you must puncture the housing in arranged sections
D6401KIT
AF6401
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 60,5 cm (12 cm of extension) width 45,5 cm
TN6401
BF02
TIGER 955 (00 > 01)
E250
Universal rear plate complete with fitting kit for MONOKEY®.
TIGER 1050 (07 > 11)
PIAGGIO - SUZUKI
SYM - TRIUMPH
SR225
PL727
D225ST
TN225
T704
T700KIT
Specific kit to install the T704 without the plate
BF02
MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg /
it is not compatible with the original sidecase holder
can be mounted without the SR225 using the T700KIT
ST 1050 SPRINT (05 > 11)
726FZ
D224S
BF02
only with spoiler / 12 cm higher than original
SPEED TRIPLE 1050 (08 > 10)
T702
BF02
for models from ’08
SPEED TRIPLE 1050 (11) NEW
TE6402
SPRINT GT 1050 (10 > 11) NEW
134
SRA227
Special rack in aluminium for Monokey® cases, black
D6400S
BF02
including the kit to specific attachments
13/03/12 10.16
CODE
DESCRIPTION
40
NOTE
YAMAHA
BW’S 50 (05 > 11)
SR356
it is necessary to remove the original grab handle / use the plate
included in the box
NEO’S 50-100 (97 > 02)
SR86
SR366
105A
128A
A285A
NEO’S 50 (08 > 11)
BW’S 125 (10 > 11)
SR372
288A
A288A
maximum load allowed 3 kg / use the plate included in the box / you
must remove the grab rails, they are replaced by the rack itself
CIGNUS X 125 (04 > 06)
SR354
CIGNUS X 125 (07 > 11)
SR354
102A
128A
A283A
MAJESTY 125-150 (99 > 00)
SR43
Special rack
MAJESTY 125-150-180 (01 > 11)
SR46
SR46M
130DT
D130KIT
VITY 125 (10 > 11)
288A
A289A
YAMAHA
SR373
X-CITY 125-250 (07 > 11)
SR361
D439ST
XENTER 125-150 (12) NEW
SR2102
Special rack
135
13/03/12 10.16
CODE
DESCRIPTION
D2102ST
41
NOTE
X-MAX 125-250 (05 > 09)
SR355
SR355M
D438ST
TB49
Specific backrest
you must puncture the housing in arranged sections / MONOKEY® plate
M5 in nylon inlcuded
included in the box
25,5 cm higeher than original
X-MAX 125-250 (10 > 11)
maximum load allowed 6 kg / it is neccesary to puncture the housing
behind the saddle / use the plate included in the box
SR370
SR370M
TB55
Specific backrest
446DT
D446KIT
AF446
D446B
XT 125 R/X (05 > 11)
E332
MAJESTY 250 (96 > 99)
SR42
SR42M
D115ST *
®
MAJESTY 250 (00 > 07)
SR44
SR44M
D124ST *
with air intake
D127ST *
without moulding steel / without a hole for the air
* THE ITEM IS SOLD IN PACKS OF THREE PIECES EACH
XV 250 VIRAGO ( > 99)
A10
A14
low and transparent version
XC 300 VERSITY (03 > 07)
D432ST
YAMAHA
TB50
Specific backrest
MAJESTY 400 (04 > 08)
136
E331
E331M
D137ST
TB47
Specific backrest
TB48
Specific backrest
it cannot be mounted if rack and case are installed / compatible from
’04 to ’06
13/03/12 10.16
CODE
DESCRIPTION
42
NOTE
MAJESTY 400 (09 > 11)
E331
E331M
D445B
Specific sports screen, black. 66 x 44 cm (H x W)
445DT
D445KIT
AF445
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 79.3 cm (12 cm of extension) width 65 cm
TB48
Specific backrest
TB47
Specific backrest
T277
22.5 cm higher than original
T-MAX 500 (01 > 07)
SR45
D128ST *
D128B
Specific sports screen , smoked 52 x 44,5 cm (H x W)
TB45
Specific backrest
TB51
Specific backrest
T272
T-MAX 500 (08 > 11)
SR364
SR364M
SR2013
SR2013M
SR369
SR369M
SR2100
D442B
Specific screen, black 59 x 45 cm (H x W)
D442ST
AF442
TB52
maximum load allowed 6 kg / MONOLOCK® plate M5M in nylon
included / it is neccesary to puncture the housing behind the saddle
6 Kg
Can not be mounted with art. TB52 or T273 / MONOKEY® plate M5 in nylon included / maximum load
allowed 5 Kg / It is necessary to drill the tail fairing of the scooter in the indicated points to mount it
MONOLOCK® plate M5M in nylon included / it is necessary to drill the tail fairing of the scooter in the
indicated points to mount it / maximum load allowed 5 Kg / Can not be mounted with art. TB52 or T273
maximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to
the original alluminium rack, which is available as an optional extra from the manufacturer company
including two rubber stoppers to close the holes of mirrors for those who
want to move from the original place
Specific backrest
to be mounted only with specific carrier
TB53
Specific backrest
it cannot be mounted if rack and case are installed / you must puncture
the housing in arranged sections
T273
SC2013
Dry-Cool seat cover specific for Yamaha T-Max 530 (12) and Yamaha T-Max 500 (08 > 11)
T-MAX 530 (12) NEW
SR2013M
D2013ST
SC2013
Dry-Cool seat cover specific for Yamaha T-Max 530 (12) and Yamaha T-Max 500 (08 > 11)
6 Kg
YAMAHA
SR2013
XV 535 VIRAGO (89 > 00)
A10
A14
low and transparent version
FZS 600 FAZER (98 > 99)
340F
D122S
137
13/03/12 10.16
CODE
DESCRIPTION
43
NOTE
FZS 600 FAZER (00 > 03)
340F
D122S
FZ6/FZ6 600 FAZER (04 > 06)
351FZ
PL351
PLX351
D136ST
140D
Specific screen, smoked 35 x 36cm (H x W)
D140KIT
TN358
T351
351KIT
Specific kit to install the PL351 and T351 without the Monorack
BF05
®
12,5 cm higher than original / for faired version
not for faired version
tripod mounted
FZ6 S2 / FZ6 600 FAZER S2 (07 > 11)
351FZ
PL360
PLX360
440D
D440KIT
D441S
A284A *
Specific fitting kit for 245A, 245N, 246_ _ _
TN358
TE351
351KIT
Specific kit to install the PL360, PLX360, TE351 without the Monorack
BF05
19 cm higher than the original / for faired version
for faired version
16 cm higher than original / does not need attaches / for faired version
not for faired version
tripod mounted
XJ 600 DIVERSION (91 > 95)
325F
325F
D116S
XJ 600 DIVERSION N (96 > 99)
325F
XJ6 / XJ6 DIVERSION / XJ6 DIVERSION F 600 (09 > 11)
YAMAHA
364FZ
PLXR364
A286
including fixing kit / only for XJ6
A286NO
including fixing kit / only for XJ6
D444S
Specific screen, smoked 42.5 x 38 cm (H x W)
D449S
Specific screen, smoked, 50 x 38 cm (H x W)
TE275
T275
BF05
138
10 cm higher than original / only for XJ6 Diversion
19,5 cm higher than original / only for XJ6 Diversion F
13/03/12 10.16
CODE
DESCRIPTION
44
NOTE
XT 600 E (95 > 02)
333F
356FZ
with integrated passenger grabrails
A281A *
Specific fitting kit for 245A, 245N, 246_ _ _
MT 03 600 (06 > 11)
TN356
T129
BF05
YZF 600 THUNDER CAT (96 > 02)
338F
YZF 600 R6 (06 > 07)
BF05
XVS 650 DRAG STAR (97 > 02)
A35N
A23
AS100A2
XVS 650A DRAG STAR CLASSIC (98 > 07)
A39
AS102A2
TS818
Specific fitting kit for A39
XT 660 R / XT 660 X (04 > 06)
SR353M
PL353
D433S
XT 660 R / XT 660 X (07 > 11)
SR365M
PL362
D433S
TN359
3 kg
only for XT 660 R version
XT 660Z TENERÉ (08 > 11)
E333
E333M
PLXR363
PL363
D443ST
TN348
BF05
YAMAHA
®
XTZ 750 SUPER TENERÉ (89 > 99)
316F
D98S
139
13/03/12 10.16
CODE
DESCRIPTION
45
NOTE
XV 750 VIRAGO (89 > 98)
A35N
A23
AS99A2
compatible from ’92 to ’98 / high and shaded bottom version
compatible from ’92 to ’98 / low, transparent version
FZ8 / FAZER 8 800 (10 > 11)
366FZ
SR2100
PLXR366
366KIT
Specific kit to install the PLXR366 and TE366 without the Monorack
A287
including fixing kit / not for faired version
A287N
including fixing kit / not for faired version
D448S
TN352
TE366
BF05
maximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to
the original alluminium rack, which is available as an optional extra from the manufacturer company
you can mount only V35 MONOKEY® SIDECASES / can be mounted
can be mounted without the 366FZ Monorack using the 366KIT
TDM 850 (96 > 01)
336F
PLA336
Tubular side-case holder (black)
D116S
in order to fix the top-case you have to combine with PA01
TDM 900 (02 > 11)
347F
SR347
Special rack
only match the plates M3, MM / maximum load allowed 6 Kg
PL347
PLX347
D132S
TN347
BF05
maximum load allowed 3 kg / the indicators must be moved from
original position
only with spoiler
331F
Y215
XVS 950 A MIDNIGHT STAR (09 > 11)
YAMAHA
TS825
A47
AS103A2
Specific fitting kit for A46, A47
T276
FZS 1000 FAZER (01 > 02)
348FZ
D129S
FZS 1000 FAZER (03 > 05)
140
348FZ
PL349
®
you can only mount MONOKEY® E21 CRUISER cases / is mounted in
13/03/12 10.16
CODE
DESCRIPTION
D129S
46
NOTE
FZ1 FAZER 1000 (06 > 11)
we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or
M6M plate / It requires fitment of cases up to 37 ltr / maximum load allowed 6 kg
359FZ
PLX359
PLXR359
PLX359KIT
Specific kit to install the PLX and the PLXR without the Monorack
D437S
TN357
BF05
you can mount only V35 MONOKEY® SIDE CASES / you must move the indicators from
their original position / can be mounted without the Monorack using the PLX359KIT
you must move the indicators from their original position / you can mount only V35
MONOKEY® SIDE V35 / can be mounted without the Monorack using the PLX359KIT
FZ1 1000 (06 > 11)
we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or
M6M plate / It requires fitment of cases up to 35 ltr / maximum load allowed 6 kg
365FZ
PLX359
PLXR359
365KIT
Specific kit to install the PLX and the PLXR without the Monorack
TN357
T271
BF05
you can mount only V35 MONOKEY® SIDECASES / you must move the indicators from
their original position / can be mounted without the Monorack using the 365KIT
you must move the indicators from their original position / you can mount only V35 MONOKEY®
SIDECASES® SIDE V35 / can be mounted without the Monorack using the 365KIT
can be mounted without Monorack
YZF R1 1000 (09)
BF05
BT 1100 BULLDOG (02 > 09)
350FZ
XV 1100 VIRAGO (89 > 99)
A23
A35N
AS99A2
XVS 1100 DRAG STAR (99 > 02)
A23
A35N
AS100A2
XVS 1100 DRAG STAR CLASSIC (00 > 02)
A39
AS102A2
Specific fitting kit for A39
297F
YAMAHA
FJ 1100
FJ 1200 (87 > 99)
297F
XJR 1200 (95 > 98)
341F
141
13/03/12 10.16
CODE
DESCRIPTION
47
NOTE
V-MAX 1200
A123
XT 1200Z SUPER TENERÉ (10 > 11)
SR371
MONOKEY® plate M5 in nylon included / is compatible with the original side case holder /
to open the original side -cases you ought to remove the back top case from the plate
SRA2101
it can be fit with the original side-case / to open the original side -cases you ought to remove the back top case from the plate
/ maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
PLR367
PL367
D447ST
AF447
TN355
BF05
FJR 1300 (01 > 05)
SR346
D134ST
in nylon included
FJR 1300 (06 > 11)
E228
E228M
SR357
PLX357
®
D436ST
BF05
Maximum load 6 Kg. / Complete with M5 Monokey plate
Maximum load 6 Kg. / Complete with M5M Monolock plate
you can mount only V35 MONOKEY® SIDE CASES / to be mounted
only the specific side-case
XJR 1300 (98 > 02)
341F
361F
BF05
XJR 1300 (04 > 06)
355F
XJR 1300 (07 > 11)
XVS 1300 MIDNIGHT STAR (07 > 11)
A46
AS103A2
TS824
Specific fitting kit for A46, A47
YAMAHA
142
13/03/12 10.16

Application Chart 2012.indb

Transcription

Similar documents

jet helmet givi hps® 20.1

SMA Series Catelog