Small Single-action Vice Grip, QC fitting

Small Single-action Vice Grip, QC fitting

Small Single-action
Vice Grip, QC fitting
Description
Small single-action vice grips are ideal for testing low force applications on flat samples. These general purpose side
loading vice grips are fitted with 30 mm x 30 mm (1.2" x 1.2") flat faced jaws.
Applications
Used for tensile and peel testing of:
• films • rubber
• flexible sheet materials • woven fabrics
• tape
•
•
•
•
paper
tissue
laminates
textiles
Specifications
Part No.
432-264
Load Capacity
200 N
20 kgf
Post Ø
45 lbf
QC20
Jaw Capacity
8 mm
0.32"
Jaw Width
30 mm
www.mecmesin.com
1.18"
Height
65 mm
2.56"
Weight
215 g
0.47 lb
testing to perfection
Dimensions mm (inch)
ALL DIMENSIONS ARE IN MILLIMETRES
FOLLOWED BY INCHES: MM ( IN" )
30 1,181"
65 2,559"
30 1,181"
DRAWING IS INDICATIVE ONLY
8 ( 0,315" ) MAX
O 8 0,315"
O 20 0,787"
30 1,181"
432-264
DISTRIBUTOR STAMP
Mecmesin reserves the right to alter equipment specifications without prior notice. E&OE
Head Office
Mecmesin Limited
France
Mecmesin France
Germany
Mecmesin GmbH
w: www.mecmesin.com
e: [email protected]
w: www.mecmesin.fr
e: [email protected]
w: www.mecmesin.de
e: [email protected]
North America
Mecmesin Corporation
Asia
Mecmesin Asia Co., Ltd
China
Mecmesin (Shanghai) Pte Ltd
w: www.mecmesincorp.com
e: [email protected]
w: www.mecmesinasia.com
e: [email protected]
w: www.mecmesin.cn
e: [email protected]
www.mecmesin.com
DS-1065-01
2:1 @ A3