REAR - Xtreme4x4

Transcription

REAR - Xtreme4x4
INTERNATIONAL APPLICATION
CATALOGUE
NUMBER
28.1
december 2012
OME Features
NITROCHARGER SPORT SHOCK ABSORBERS
LARGE BORE 35MM TWIN TUBE DESIGN - Allows greater
oil volume for cooling and sustained valving performance
and strong 1.6mm outer tube construction protects the
vital internal components from damage.
LARGE 18MM HARDENED CHROME PISTON ROD Strong enough to handle any load or harsh conditions
expected from your 4x4.
TRIPLE LIP CHECK VALVE OIL SEAL – MK2 -The latest
technology in oil seal design – physically larger with
quantum improvements in durability, oil and gas retention
with much greater resistance to heat so it keeps working
under the harshest conditions.
TEFLON IMPREGNATED LOW FRICTION ROD GUIDE The latest refinement in rod guide design further reduces
heat build up and maintains performance.
TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A
new component that maintains consistent and uniform
performance by providing a tight and uniform fit between
the piston rod and rod guide.
MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique
and new valving system that features multiple disc valving
control at the base of the shock and on both sides of the
piston rod. This allows the OME engineers more valving
options for better ride quality and handling control.
35MM HIGH FLOW TEFLON BANDED PISTON - New
low friction design has less restrictive oil flow through the
piston, reduces heat build up and aeration of the oil that
leads to fade.
VEHICLE SPECIFIC VALVING - OME shock absorber’s
performance stand head and shoulders over its
competitors because many hours of OME engineering
valving work have been put into each and every shock
absorber to ensure our customers get the best ride and
handling their vehicle can have.
POLYETHYLENE DIRT SHIELD – Impact resistant,
polyethylene dirt shield provides additional protection from
stone chips and off road debris.
NITROGEN GAS – Increases the temperature operating
range and improves oil flow through the valving, ensuring
optimum performance.
SUPPLEMENTARY WELDS - For strength and reliability,
all mounts have supplementary welds.
NITROCHARGER SHOCK ABSORBERS
GIANT 18MM CHROMED SHAFT - Indestructible for
Australia’s rugged off roading. Induction hardened then
hard chromed to a superfine finish.
NITROGEN GAS - The gas pressure keeps the oil cohesive
under all situations.
TWIN TUBE DESIGN - 33% thicker outer tube insures that
rocks do not damage internal operating components. This
design also allows for a greater volume of oil which keeps
shock cooler.
35MM SEVEN STAGE COMPRESSION VALVE - Delivers
all the subtleties of compression rates for the best ride and
handling.
CHECK VALVE SEAL - The latest in seal technology,
this shaft seal significantly improves gas retention whilst
offering excellent longevity.
GLACIER BUSH - A Teflon coated rod guide bush significantly reduces heat build up in the rod guide area,
developed from the Emu’s off road racing programme.
GIANT 35MM TEFLON BANDED PISTON - A new four
stage coil sprung rebound valve system to control
vehicle bounce.
SUPPLEMENTARY WELDS - On all mounting eyes & pins
for maximum shock absorber mount strength.
STONEGUARD - Protects oil seal and piston rod against
stone and dirt damage.
COIL SPRINGS
X5K MICRO-ALLOYED SPRING STEEL – New generation
high strength spring steel grade designed to withstand
higher operating stresses with superior resistance to sag
and improved toughness and corrosion fatigue properties.
SHOT PEENED – To reduce stress, which greatly
enhances spring life.
DOUBLE SCRAGGED – To eliminate spring sag.
VARIABLE AND CONSTANT RATE - Designs used to
obtain optimum ride comfort and load carrying capabilities.
STEERING STABILISERS
COIL SPRUNG 9 STAGE VALVING - For optimum
performance.
35MM PISTON & BORE - Greater oil volume giving better
damper performance.
TWIN TUBE DESIGN - Protects the internal components
against stone damage.
STEEL STONEGUARD - Protects the piston rod against
stone damage.
FOAM CELL - Keeps the oil at the valving to prevent fade.
ORIGINAL MOUNTS - All mounts are of similar design to
original stabilisers for ease of fitment.
LEAF SPRINGS
FLAT AXLE SEAT AREA - Lowers spring stress whilst
retaining spring free camber height. Unique to most
OME springs.
ANTI FRICTION INTER LEAF LINERS - Used where
applicable to reduce friction between spring leaves giving
better ride comfort and increased spring life.
SHOT PEENED - On the tension side of all leaves to
double spring life.
DRAW TAPERED & DIAMOND CUT LEAVES - For
reduced interleaf friction and improved load distribution
in the load bearing area.
GRAPHITE COATED - For further reduced friction.
MILITARY WRAPPED - For extra safety (where fitment
permits).
LOOSE CLAMPED - For smooth & quiet operation.
URETHANE BUSHES - LEAF SPRING
PREMIUM GRADE - Not all bushes are the same - OME
bushes are precision moulded in captive moulds to
ensure exact tolerances for long bush life.
SPLINES - Ensures the best fit by taking up irregularities
in spring eyes.
UNIQUE OME DESIGN - Clever lip seal and shoulder
design prevents dirt penetrating between bush shoulder
and shackle face.
GREASABLE SHACKLES
REDUCED WEAR - Greasable shackles reduce shackle
pin deterioration, increase bush life, enables easy
maintenance and improve ride and handling.
ANTI INVERSION FACILITY - Built in feature on all
LandCruiser greasable shackles.
SERVICING - Simple & effective.
WARRANTY: For a copy of ARB’s Warranty Policy, ARB Products: Warranty Against Defects, please visit the ARB website – www.arb.com.au
NOTES
CONTENTS
PAGE
GUIDE TO SELECTION ……………………….……………………………………………….…
4
NITROCHARGER SPORT SELECTION ……..……….……….………………………………
5
NITROCHARGERS & STEERING STABILISER APPLICATIONS ……..……….……….…
9
COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE ………………………
13
LTR REMOTE CANISTER SELECTION…...…...………………………………………………
14
SUSPENSION APPLICATIONS
CHRYSLER JEEP ……………………………...…………………………………………………
FORD ……………………………………………………………………………….…...…………
HOLDEN / ISUZU / GM …………………………………………………………………………
HUMMER …………………………………………………………….………….………………..
HYUNDAI …………………………………………………………….………….………………..
KIA ……………………………………………………………………………….………..………
LADA ……………………….………………………………………………………….……………
LAND ROVER ………..……………………………………………………….……….…………
MAZDA ……………………………………………………………………………..….……………
MITSUBISHI ………………………..………………………………………………….…………
NISSAN ………………………………………………………………………….…….……………
SSANGYONG ……………………………………………………….…..…………….…………
SUZUKI …………………………………………………………………………..…….…………
TOYOTA …………………………………………………………………….………….…………
VOLKSWAGEN …………………………………………………………………….………….…
TECHNICAL SPECIFICATIONS
SUSPENSION BUSH KIT SELECTION …..……....……………………………………………
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS …………………………………
NUMERICAL SPRING & SHOCK BUSH APPLICATIONS …………………………………
OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS …………………………
SUSPENSION FITTING KITS …………………………………………………………………
ADDING OR REMOVING AN EXTRA LEAF ………...…………………………………………
REPLACEMENT MAIN OR 2ND LEAF …………………………………………………………
REPLACEMENT CENTRE BOLTS ……………………………………………………….……
DAKAR SPRING SERVICE PARTS ……………………………………………………….……
U BOLTS …………………………………………………………………….…………..………
LEAF SPRING TRIM PACKERS ………………………………………………………………
CLIP LINER KITS FOR LEAF SPRINGS ………………………………………………………
INTER-LEAF LINER KIT FOR LEAF SPRINGS ………………………………………………
LEAF SPRING CENTRE BOLT SLEEVES …..…………………………………………………
LEAF SPRING SPECIFICATIONS ……………………………….....…..………………………
COIL SPRING SPECIFICATIONS …..…..…..…………………………………………………
NITROCHARGER SPORT SPECIFICATIONS …..……………………………………………
NITROCHARGER SPECIFICATIONS …..………………………………………………….…
SHOCK ABSORBER MOUNT TYPE ……………………………………………………………
TORSION BAR SPECIFICATIONS ……………………………………………………………
STEERING STABILISER SPECIFICATIONS …..……..………………………………………
RECOMMENDED FITTING TIMES ……………………………………………………….….…
15
24
28
33
34
34
34
35
39
41
48
63
63
68
95
96
101
103
106
107
112
113
114
114
115
116
116
116
116
117
119
125
128
132
132
133
134
© ARB Corporation Limited, Old Man Emu Division P.O. Box 105 Kilsyth, Vic. 3137 Australia.
All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical,
including photocopying, recording, taping or information systems) without the written permission of the publisher.
OME INT NO.28.1 DECEMBER 2012
GUIDE TO SELECTION
Terminologies & Explanations
Please note most suspension development has been carried out on Australian specification models.
Therefore, some differences may exist between the same model in another country. Overseas customers will
need to make allowances for these possible differences.
Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles which will not require all
items, eg. trimming kits, caster kits, all U bolts shown, etc. Actual individual vehicle requirements can only be determined when the suspension system
is fitted.
GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and
tyre specifications. Exceeding GVM ratings can have legal and safety implications and is not recommended.
LOAD RATING - FRONT: Weights shown are maximum permissible loads with regard to accessories fitted, eg. Bull
bar, winch, dual battery, etc.
LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride and
handling.
REAR:
LIGHT LOAD: Full passenger load with luggage weights up to 150kg.
MEDIUM LOAD: Full passenger load with luggage weight varying from 200kg to 350kg.
CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring
performance.
Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications.
LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original ride height. This
y from vehicle to vehicle.
amount can vary
OE: Original Equipment, as supplied by the manufacturer of the vehicle.
SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*)
indicates the shock absorber with the firmer ride.
SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the
flange area and regularly thereafter with OME polyurethane grease.
STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutral
valving.
CASTER KIT: The OMECA77B, CALR1 and CALR2 kits consist of 4 eccentric bushes which are pressed into the
leading arms of the vehicle. This will induce positive caster into the front geometry.
LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A"
have a greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B'
springs to the passenger side.
COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are
generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication.
GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.
GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eye
bushes.
TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning.
VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height.
VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height.
VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle
trimming problems and will increase ride height when fitted.
Page 4
OME INT NO.28.1 DECEMBER 2012
NITROCHARGER SPORT SELECTION
SELECTION ADVICE
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring
rates and customer applications.
Firm Valving
The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed
to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle
bounce over rough roads.
If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident
by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
Soft Valving
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry
light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can
occur.
A RECOMMENDATION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the
original springs are also ready for replacement.
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to
work a lot harder.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and, when loaded, ride and handling
qualities will also be reduced.
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
OME NITROCHARGER SPORT
SHOCKS & STRUTS
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
60092
STEERING
STABILISERS
CHRYSLER JEEP
All
2008 on
2002 to 2007
1984 on
2006 on
1997 to 2006
1986 to 1996
Grand Cherokee ZJ
Cherokee/Liberty KK All Models
9000911
9000911
60052
60066
*60047 / 60046
60098
60093
60069
60069
60053
60067
OMESD409
OMESD48
*60049 / 6004810
60099
OMESD409
OMESD40
60040
60040
60031
Under Development
Under Development
Under Development
OMESD31 '86 on
*90020 / 90019
*60102 / 60101 /
60023
600224
*60102 / 60101 /
60023
600224
60022
*60013 / 60012
60023
60023
*60015 / 60014
Rodeo/Isuzu Pick up - RA Models / Colorado / Dmax
Rodeo/Isuzu Pick Up KB4, KBD4 & TFS
Jackaroo/Trooper & Monterey (Isuzu Wagon)
Jackaroo/Trooper
Jackaroo/Trooper
Frontera Wagon
Frontera UT
60031
60031
60031
60031
60031
60031
60031
*60064 / 60032
*60064 / 60032
60074
*60063 / 600098
*60064 / 60032
Under Development
60074
H3
90001
60045
Terracan V6
Terracan Diesel
60040
60040
60060
60060
Cherokee/Liberty KJ ALL Models (OME Springs)
Cherokee XJ - Petrol & Diesel
Wrangler JK - All Models
Wrangler TJ
Wrangler YJ
OMESD40
DAIHATSU
1992 to 1997 Feroza II F310
1988 to 1992 Feroza I F300
1993 on
Rocky F78 Wide Track
FORD
2011 on
Ranger PX
2006 to 2011 Ranger PJ All Models
1985 to 2005 Courier/Ranger Pick Up
1987 to 1993 Raider Wagon
All
Maverick Wagon & Hard Top
To 8/89 OMESD34
9/89 on OMESD36
HOLDEN/ISUZU/CHEVY
2003 on
7/81 to 2003
1992 to 2004
11/86 to 3/92
1982 to 10/86
99 to 6/2003
1995 to 1998
HUMMER
07/2007 on
HYUNDAI
2001 on
2005 on
Page 5
OME INT NO.28.1 DECEMBER 2012
NITROCHARGER SPORT SELECTION
OME NITROCHARGER SPORT
SHOCKS & STRUTS
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
60024
60037
60037
60037
*60025 / 60026
*60039 / 60038
*60039 / 60038
*60039 / 60038
*90020 / 90019
*60102 / 60101 /
60023
2006 to 2011 Mazda BT50 All Models
600224
*60102 / 60101 /
60023
1987 to 2006 B2600 Pick Up All Models
600224
60023
*90007 / 9000611
60040
60040
60051
*60033 / 60019
60041
*60036 / 60057
60056
60051
*60036 / 60057
9000811
60040
60040
*60075 / 60076
60059
*60036 / 60057
60036
60050
60058
STEERING
STABILISERS
LAND ROVER
1999 to 2004
1991 to 1999
To 5/1995
1984 on
Discovery Series II (Not Suitable for Airbag Models)
Discovery Series I
Range Rover (Not Suitable for Airbag Models)
Defender & County 90, 110 & 130
OMESD02
OMESD11
OMESD11
OMESD32
MAZDA
2011 on
Mazda BT50
MITSUBISHI
4/2000 on
91 to 3/2000
91 to 3/2000
1989 to 5/91
Pajero/Montero NS, NM, NP & NT LWB & SWB
Pajero/Montero (Coil Springs) NH, NJ, NK & NL
Pajero/Montero (Leaf Springs) NH, NJ, NK & NL
Pajero/Montero (Coil Springs) NF & NG
To 4/1991
Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF &
NG
2009 on
2000 to 2008
1998 to 2000
7/2006 on
10/96 to 6/06
1993 to 9/96
91 to 8/96
10/86 to 1993
To 1986
To 9/1986
Challenger/Montero Sport KH
Challenger/Montero Sport (Coil Springs)
Challenger/Montero Sport (Leaf Springs)
Triton/L200 ML & MN All Models
Triton/L200 MK Models
Triton/L200 MJ Models
Triton/L200 V6 (OE Springs)
Triton/L200 (V6 & 4 Cylinder) ME, MF, MG, MH
L200 MA, MB, MC & MD
L300 Vans SA, SB, SC & SD
9000811
60040
60051
60051
60051
60051
60051
60057
60058
60058
60032
NISSAN
2/2000 on
1997 to 1/00
1997 on
1997 on
To 8/1989
9/1989 on
1988 to 7/97
2005 on
1986 to 8/95
2005 on
10/2002 on
1/86 to 8/02
1/1986 on
1980 to 1985
1996 to 1999
Patrol Y61 (GU) SWB & Wagon
Patrol Y61 (GU) Wagon & SWB
Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear)
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs)
Pathfinder R51
Pathfinder/Terrano WD21
Navara D40
Navara D22
Navara D21 & D22 Pick Up
Navara D21 & D22 Pick Up 4x2
720 Ute & Cab Chassis
Terrano II 4x4 (European Models)
*60015 / 610143
*60015 / 610143
60054
OMESD01
OMESD11
OMESD11
OMESD34
OMESD36
OMESD22
9000311
600342
600212
600402
600402
60031
*60015 / 610143
*60015 / 61014
*60015 / 61014
60054
60016
*60064 / 60032
*60110 / 60017
60035
60035
Under Development
*60064 / 60032
60058
60031
-
9000311
60017
*60013 / 61012
*60013 / 61012
60055
*60013 / 61012
*60013 / 61012
*60013 / 61012
60068
9000311
60031
OMESD35
OMESD356
SSANGYONG
To 2005
Musso, Sport Utility & Korando Models
SUZUKI
2009 on
Equator (US Market Only)
TOYOTA
2007 on
3/1998 on
3/1998 on
4/90 to 1998
2009 on
2009 on
4/2003 to 09
7/96 to 10/02
LandCruiser 200 Series V8
LandCruiser 100 Series (IFS)
LandCruiser 100 & 105 Series (Front Live Axle)
LandCruiser 80 Series
Prado 150 Series LWB
Prado 150 Series SWB
Prado 120 Series (Except TEMS/Grande Models)
Prado 95 & KZJ90 Series
2007 on
LandCruiser 78 & 79 Series V8 Diesel Model
*91005 / 90017
*60001 / 60000
*60070 / 60018
*60070 / 60018
9001011
*90010 / 90016
9000011
90004
60008
Page 6
*61030 / 61029
*60003 / 600021
*60071 / 600201
*60071 / 600201
*60081 / 60080
*60080 / 60086
*60005 / 60004
*60027 / 60028
*60011 / 60010 /
60109
OMESD24
OMESD24
OMESD47
OME INT NO.28.1 DECEMBER 2012
NITROCHARGER SPORT SELECTION
OME NITROCHARGER SPORT
SHOCKS & STRUTS
YEAR
VEHICLE DESCRIPTION
STEERING
STABILISERS
FRONT
REAR
60008
*60111 / 60011 /
60010
OMESD47
60008
*60011 / 600101 /
60109
OMESD24
TOYOTA (continued)
2007 on
LandCruiser 76 Series Wagon - V8
1999 to 2006 LandCruiser 78 & 79 Series - 6 cylinder models
1985 to 1999
1985 on
All
All
LandCruiser 75 Series
LandCruiser 70, 73 & 74 Series
LandCruiser HZJ71 & HJZ74 Series
LandCruiser II Wagon
*60063 / 60009
60009
60008
60089
1984 to 1990 Bundera RJ70
1986 to 3/90
1980 to 1986
All
All
2010 on
2006 to 2010
2005 on
9/97 to 2004
9/83 to 8/97
1988 to 8/97
To 8/1983
2010 on
2003 to 2010
1996 to 2002
1990 to 1996
1986 to 1990
60094
LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm)
LandCruiser 60 Series (Rear Lower Pin 16mm)
LandCruiser 45 - 47 Series
LandCruiser 40 - 42 Series SWB
FJ Cruiser
FJ Cruiser
HiLux Vigo KUN26R, GGN25R
HiLux Tiger LN172, LN167, KZN165, RZN174 &
RZN169 (IFS)
HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
4 Runner (USA)
4 Runner (USA)
4 Runner Front & Rear Coil Springs (USA)
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs
4 Runner (IFS) Rear Leaf Springs
*60063 / 60009
*60063 / 60009
60097
60097
9001011
9000011
*9000211/90011
60042
60061
60072
60061
*60011 / 60010
60062
60044
60090
1
60096
60095
RHS
LHS
*60065 / 60062
*60064 / 60032
*600064 / 60032
*600064 / 60032
*60081 / 60080
60004
*60007 / 60006
60044
600437
LHS
RHS
*60065 / 60062
*60065 / 60062
9001011
9000011
90004
60072
60072
*60064 / 600321
*60081 / 600801
*60005 / 60004
60027
60073
60065
*90013 / 90012
*60083 / 60082
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD23
OMESD23
OMESD33
OMESD21
OMESD21
OMESD33
OMESD33
VOLKSWAGEN
2010 on
Amarok
NOTES: *first part number has firmer valving.
1. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered
on loose road surfaces. OME661 (suit 4 Runner 2010 On, LandCruiser 80 & 100 Series only) OME660 (all other models).
2. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
3. FK18 rear sway bar extension bracket for LWB Models and FK24 for SWB Models are mandatory fitments with Nitrochargers to prevent damage
to sway bar due to increased wheel droop.
4. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
5. OME Struts can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
6. OMESD35 will suit D21 models only.
7. 60043 is 20mm longer and must only be installed to right hand side.
8. OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID.
9. OMESD40 will only fit left hand drive models.
10. FK16 20mm bump stop spacer kit is a mandatory fitment.
11. No top mounting bushes supplied, re-use OE bushes.
Note: Replacement Nitrocharger Sport Dirt Shields: 384006170, 384006210, 384006250 & 384006290.
The last 3 numbers of the part number indicates the length of the dirt shield.
The replacement Dirt Shield Part Number for Individual Sport Shocks are listed in the Nitrocharger Sport Specifications
on page 125 to 127.
Page 7
OME INT NO.28.1 DECEMBER 2012
NITROCHARGER SPORT SELECTION
NITROCHARGER SPORT L SERIES
Front
Open
(mm)
Closed
(mm)
Rear
Jeep JK
60066L
693
404
60067L
706
422
Jeep XJ
60052L
678
392
60053L
622
366
Jeep TJ
60047L
678
392
60049L
622
366
Patrol Y60, Y61
60013L
555
322
60015L
716
426
Vehicle
Open Closed
(mm) (mm)
LandCruiser 80, 100
60070L
667
381
60071L
673
387
Discovery I to 99
60037L
593
349
60039L
600
366
Discovery II to 04
60024L
627
388
60025L
627
388
Defender 90, 110, 130
60037L
593
349
60039L
600
366
60037L
593
349
660039L
600
366
Range Rover to 5/95
Non Airbag Models
Remarks
Refer to page 125 to 127 of the OME International Application Catalogue for open and closed lengths of equivalent
standard Nitrocharger Sport models.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of
competition racing. The fitter must also note on the customer's receipt "racing application no warranty
applies". This will prevent any future misunderstanding.
Page 8
OME INT NO.28.1 DECEMBER 2012
NITROCHARGERS & STEERING STABILISERS
SHOCK ABSORBER SELECTION ADVICE
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring
rates and customer applications.
Firm Valving
The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed
to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle
bounce over rough roads.
If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident
by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
Soft Valving
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry
light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can
occur.
A CAUTION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the
original springs are also ready for replacement.
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to
work a lot harder.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling
qualities will also be reduced.
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
OME NITROCHARGERS,
STRUTS & CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
N188S
N190
N132
N132
N190
N117
N40
N36
STEERING
STABILISERS
CHRYSLER JEEP
2006 to 2010
2008 on
2002 to 2007
2006 to 2010
1998 to 2005
1992 to 1998
1984 on
To 1986
1974 to 1986
To 1986
2006 on
1997 to 2006
1986 to 1996
Comander XK
Cherokee/Liberty KK ALL Models
Cherokee/Liberty KJ ALL Models (OME Springs)
Grand Cherokee WH & WK
Grand Cherokee WJ & WG
Grand Cherokee ZJ - 6 cylinder & V8 engines
Cherokee XJ - Petrol & Diesel
Cherokee Wagon & J10 Ute (Full Size)
Cherokee W10 & J20 Utes and Cab Chassis
CJ5, 6, 7, & 8
Wrangler JK - All Models
NS13118
*NS131/NS13018
N188S18
N11112
*N39/N39C
N35
OMESD4011
OMESD4011
N561
N43
*N56/N54
*N198/N212
OMESD48
Wrangler TJ
Wrangler YJ
N411
N411
*N41/N811
*N196/N211
*N66/N66C
N33
N675
N34
OMESD4011
OMESD4011
Feroza II F310
Feroza I F300
Rocky F78 Wide Track
Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs
Rocky F77 & 78 Tray Top with Leaf Springs
Scat Hard Top
*N18/N57G
*N18/N57G
N26F
OME027
OME027
N41/N81
*N49/N96
N43
N33
N43
*N48/N97
*N48/N97
OMESD31 '86 on
OMESD31 '86 on
2006 to 2011
1985 to 2005
To 2001
2005 to 2008
1999 to 2004
1987 to 1993
All
Ranger PJ All Models
Courier/Ranger 1 Tonne
Explorer 4x4 Only
Ford F250 & F350
Ford F250 & F350
Raider Wagon
Maverick Wagon & Hard Top
N194/N1878
N518
N16
N195
N178
N51
*N21/N23F
N189
N53
N17
N179
All
1981 to 1989
1981 to 1989
1981 to 1989
1970 to 1980
1970 to 1979
Maverick Ute & Cab Chassis
Bronco (Single I Beam Front End)
Bronco (Dual I Beam Front End)
F100 4x4 & 4x2 (Single I Beam)
F100 4x4 & 4x2 (Twin I Beam)
F250 4x4 & 4x2 (Twin I Beam)
DAIHATSU
1992 to 1997
1988 to 1992
1993 on
1984 to 8/93
1984 to 1993
All
FORD
N28
N179+N18010
N53
*N29/N22F
N25
To 8/89 OMESD34
9/89 on OMESD36
OMESD22
N423
N423
N423
N55
N55
Page 9
OME INT NO.28.1 DECEMBER 2012
NITROCHARGERS & STEERING STABILISERS
OME NITROCHARGERS,
STRUTS & CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
N65
*N42/N89
N150
*N65/N26F
N65
*N65/N26F
*N65/N26F
*N65/N26F
*N65/N26F
OME025
OME015
*N42/N89
*N42/N89
N15
STEERING
STABILISERS
HOLDEN/ISUZU/CHEVY
2003 on
Rodeo/Isuzu Pick up -RA & RA7 Models/Colorado
Diesel/Dmax
2003 on
7/81 to 2003
1992 to 2004
11/86 to 3/92
1982 to 10/86
99 to 6/2003
1995 to 1998
1985 to 1987
1985 to 1987
Rodeo/Isuzu Pick up - RA Models/Colorado V6
Rodeo/Isuzu Pick Up KB4, KBD4 & TFS
Jackaroo/Trooper & Monterey (Isuzu Wagon)
Jackaroo/Trooper
Jackaroo/Trooper
Frontera Wagon
Frontera 2 & 4 Door UT
Drover QB (OE Springs)
Drover QB (OME Springs Fitted)
N8813
*N42/N89
N102
N15
OME023
OME013
OMESD30
OMESD30
KIA
2006 to 2009 Sorento All BL Models
02 to Late 06 Sorento All Models
N147S + N148S18
N147S + N148S18
N205
N149
*N107/N107C
*N115/N45F
N108
*N44/N46
OMESD02
OMESD11
N17616
*N115/N45F
*N115/N45F
N78
N78
N17716
*N44/N46
*N44/N46
N69
N90
OMESD11
OMESD32
OMESD11
OMESD11
*N41/N811
*N41/N811
*N194/N1878
N518
N189
N53
*N203S/N129S18
*N203S/N129S/
N109S18
N18
N18
See Sport Selection
*N204/N152
N64
*N56/N54
See Sport Selection
See Sport Selection
*N56/N54
LAND ROVER
1999 to 2004
1991 to 1999
1994 to 2001
To 5/1995
1984 on
To 1984
To 1984
Discovery Series II (Not Suitable for Air Bag Models)
Discovery Series I
Range Rover MK II P38A Models
Range Rover (Not Suitable for Air Bag Models)
Defender & County 90, 110 & 130
Land Rover Series I, II & III (80" & 109")
Land Rover Series II & III (88" SWB)
MAHINDRA
1990 to 1993 Bushranger & Stockman CJ340
MAZDA
06 to 2011
Mazda BT50 All Models
1987 to 2006 B2600 Pick Up All Models
MITSUBISHI
4/2000 on
Pajero/Montero NS, NM, NP & NT (3.2 Diesel)
4/2000 on
Pajero/Montero NS, NM, NP & NT Wagon & Hard Top (V6)
1991 to 3/00
1991 to 3/00
1989 to 5/91
Pajero/Montero (Coil Springs) NH, NJ, NK & NL
Pajero/Montero (Leaf Springs) NH, NJ, NK & NL
Pajero/Montero (Coil Springs) NF & NG
To 4/1991
Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF &
NG
2009 on
2000 to 2008
1998 to 2000
7/2006 on
10/96 to 6/06
1991 to 8/96
1991 to 8/96
1986 to 8/96
To 1986
To 9/1986
18
Challenger/Montero Sport KH
Challenger/Montero Sport (Coil Springs)
Challenger/Montero Sport (Leaf Springs)
Triton/L200 ML & MN All Models
Triton/L200 MK All Models
Triton/L200 V6 (OE Springs)
Triton/L200 (V6) MH & MJ
Triton/L200 (4 Cylinder) ME, MF, MG, MH & MJ
L200 MA, MB, MC & MD
L300 Vans SA, SB, SC & SD
N186S
N57G
N57G
N186S18
*N18/N57G
See Sport Selection
See Sport Selection
See Sport Selection
See Sport Selection
See Sport Selection
*N204/N152
N116
N116
*N56/N54
*N59/N54
N30E
N30E
N30
N30
N30
N89
NISSAN
2/2000 on
1997 to 1/00
1997 on
1997 on
To 8/1989
9/1989 on
1988 to 7/97
8/83 to 1988
1980 to 7/83
1967 to 1979
2005 on
2/99 to
t 2005
Patrol Y61 (GU) SWB & Wagon
Patrol Y61 (GU) Wagon & SWB
Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear)
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs)
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol 60 & G60 Series
Pathfinder R51
Pathfinder
P thfi d R50
*N19/N19C
*N19/N19C
*N19/N19C
*N19/N19C
*N21/N23F
*N21/N23F
N28
N49
*N47/N96
N49
N183S18
N145S/N146S
Page 10
*N29/N29C6
*N29/N29C6
N25
OMESD01
OMESD11
*N29/N29C6
*N29/N22F
*N29/N22F
N25
*N48/N97
*N48/N97
N49
N184
N104
OMESD11
OMESD34
OMESD36
OMESD22
OMESD22
OMESD22
OMESD22
OME INT NO.28.1 DECEMBER 2012
NITROCHARGERS & STEERING STABILISERS
OME NITROCHARGERS,
STRUTS & CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
N145S/N146S
N26F
N61
*N42/N89
N185
*N59/N56
*N59/N56
*N41/N81
STEERING
STABILISERS
NISSAN (continued)
1996 to 1/99
1986 to 8/95
2005 on
10/2002 on
1/86 to 8/02
1/1986 on
1996 to 2005
1980 to 1985
Pathfinder R50
Pathfinder/Terrano WD21
Navara D40
Navara D22
Navara D21 & D22 Pick Up
Navara D21 & D22 Pick Up 4x2
Terrano II 4x4 (European Models) (OE Springs)
720 Ute & Cab Chassis
N183S18
N1514
N584
*N18/N57G4
*N65/N26F
*N18/N57G4
N30
*N42/N89
N65
N118
N183S18
N103S19
N217S + N218S
N103S
N103S
N103S
OME028
OME028
OME034
OME015
OME025
OME015
OME025
OME015
OME015
N185
N105
OME036
N105
N105
N32
OMESD3514
OMESD3514
SSANGYONG
To 2005
Musso, Sport Utility & Korando Models
SUZUKI
2009 on
2001 to 2005
8/2005 on
1995 to 2005
7/88 to 2005
7/88 to 2005
All
All
To 2004
1982 to 1995
1988 to 1996
1978 to 12/81
1978 to 12/81
1978 to 12/81
1974 to 12/81
Equator (US Market Only)
XL7 Wagon V6
Grand Vitara Wagon Models
Grand Vitara 4 & 6 Cylinder
Vitara TA01 & TD01 & Wagon
Vitara TA012 TD01 SWB
Jimny SN413 (OE Springs)
Jimny SN413 (OME Springs)
Santana Samurai All Models
Sierra SJ410 & SJ413 Ute MG410 / WT1000cc (OME Springs)
Sierra SJ70, SJ71, SJ413, MG410 / WT1300cc (OME Springs)
LJ80 & LJ80V SWB (OME Springs)
LJ80 & LJ80V SWB (OE Springs)
LJ80 Ute (OME Springs)
540, LJ10, LJ20 & LJ50 (OME Springs)
OME03017
OME029
OME035
OME013
OME013
N43
N/A
OME013
OME013
OMESD3015
OMESD3015
OMESD3015
OMESD3015
OMESD3016
OMESD3015
TOYOTA
2007 on
3/1998 on
3/1998 on
4/90 to 1998
LandCruiser 200 Series V8
LandCruiser 100 Series (IFS)
LandCruiser 100 & 105 Series (Front Live Axle)
LandCruiser 80 Series
4/2003 to 09
Prado 120 Series (Except TEMS/Grande Models)
7/96 to 10/02
2007 on
2007 on
1999 to 2006
1985 to 1999
All
1984 to 1990
1985 on
All
1986 to 3/90
1980 to 1986
1980 to 1986
1986 to 3/90
To 11/1980
To 12/1984
To 12/1984
To 12/1984
2005 on
2006 to 2010
2005 on
Prado 95 & KZJ90 Series
LandCruiser 78 & 79 Series V8 Diesel Model
LandCruiser 76 Series Wagon - V8
LandCruiser 78 & 79 Series - 6 cylinder models
LandCruiser 75 Series
LandCruiser II LJ/RJ70, LJ/KZJ71 & LJ/KZJ78 Models
LandCruiser Bundera, SWB, LJ70 & RJ70 Series
LandCruiser 70,73 & 74 Series
LandCruiser HZJ71 & HJZ74 Series
LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm)
LandCruiser 60 Series (Rear Lower Pin 16mm)
LandCruiser 60 Series (OE Springs)
LandCruiser 60 Series (OE Springs)
LandCruiser FJ55
LandCruiser 45 & 47 Series
9/97 to 2004
9/83 to 8/97
9/83 to 8/97
1988 to 8/97
1988 to 8/97
T 8/1983
To
LandCruiser BJ, FJ & HJ 40 & 42 Series All Models
LandCruiser BJ, FJ & HJ 40 & 42 Series All Models (OE Springs)
Fortuner
FJ Cruiser
HiLux Vigo KUN26R, GGN25R
HiLux Tiger LN172, LN167, KZN 165, RZN174 &
RZN169 (IFS)
HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
HiLux LN65, YN65, LN106 & RN105 (OE Springs)
HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
HiLux/4 Runner LN107, RN105, RN110 & LN111(IFS)(OE Springs)
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
Page 11
N208S9
*N199/N133/N100
*N73/N70
*N73/N70
*N201S/N140S/
N139S18
*N91S/N91SC
*N181/N106
*N181/N106
N106
*N50/N88/N92
N77
N114
*N50/N88/N92
N106
*N50/N88/N92
*N50/N88/N92
N50
N50
N43
*N41/N81
*N41/N81
N41
*N167S/N166S18
N140S18
*N167S/N166S19
*N87/N80
*N93/N84
N84
N98
N98
*N93/N84
*N210/N209
*N200/N101
*N74E/N71E2
*N74E/N71E2
OMESD24
OMESD24
*N202/N142/N141
*N86
*N197/N75E
*N197/N75E
*N75F/N75E2
*N75F/N75E2
N79
N112&N113
*N85/N94
N68
*N90/N85/N94
*N42/N89/N95
N42
N90
N42
*N42/N89
*N89/N95
N42
N191
N141
*N169/N168
*N75&N75E/
N68&N68E7
*N85/N94
*N90/N85
*N85/N94
*N90/N85
*N89/N952
OMESD47
OMESD47
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD23
OMESD23
OMESD23
OMESD33
OMESD21
OMESD21
OMESD33
OMESD21
OME INT NO.28.1 DECEMBER 2012
NITROCHARGERS & STEERING STABILISERS
OME NITROCHARGERS,
STRUTS & CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
N84
*N42/N89
N142
N86
N72F
STEERING
STABILISERS
TOYOTA (continued)
To 8/1983
2003 on
1996 to 2002
1990 to 1996
1986 to 1990
1986 to 1990
1984 to 1986
1984 to 1986
1982 to 1983
1997 to 2003
2005 to 2010
To 2004
2007 on
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) (OE Springs)
4 Runner (USA)
4 Runner Front & Rear Coil Springs (USA)
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs
4 Runner (IFS) Rear Leaf Springs (OE Springs)
4 Runner (IFS) Rear Leaf Springs
4 Runner (Front Live Axle) (OE Springs)
4 Runner (Front Live Axle)
Blizzard
Kijang (4th Gen.)
Tacoma V6
Tacoma V6
Tundra
N140S18
*N91S/N91SC
N98
N98
N98
N84
N93/N84
*N41/N81
N128
N85/N94
N85/N94
N192S18
N90/N85
N85/N94
N48
N56
N182
N85
N193
N38S
N37
N140S18
*N91S/N91SC
OMESD21
OMESD33
OMESD33
OMESD33
OMESD21
OMESD21
VOLKSWAGEN
1985 to 1990 Syncro 4x4
NOTES: *first part number has firmer valving.
1. 1983 and on wide track CJ Jeeps require bush kit OMEB27 for the front lower mount and all Cherokee wagons and Mahindra lower
front and rear mounts.
2. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered
on loose road surfaces. OME661 (suit LandCruiser 80 & 100 Series only) OME660 (all other models).
3. 1981 on F100 and Bronco require bush kit OMEB27 on bottom rear mount.
4. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
5. FK16 20mm bump stop spacer kit mandatory fitment.
g to prevent
p
damage
g
6 FK18 rear swayy bar extension bracket for LWB models and FK24 for SWB models are mandatoryy fitment with Nitrochargers
6.
to sway bar due to increased wheel droop.
7. N75E and N68E are 20mm longer and must only be installed to right hand side.
8. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
9. N208S can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
10. N179 suits models with single rear shock set up. Models with twin rear shocks require N179 fitment rear of axle, N180 front of axle, also fitment
of OME660 stone shields are recommended on the N180.
11. OMESD40 will only fit left hand drive models.
12. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB1) be fitted.
13. OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID.
14. OMESD35 will suit D21 models only.
15. Only suitable for models equipped with original steering damper.
16. Shocks are the same length as OE.
17. OME030 is shorter than OME029 and must be used with OE coils to ensure coils remain entrapped.
18. No top mounting bushes supplied, re-use OE bushes.
19. FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts.
Note: Replacement dust boot part numbers: Nitrocharger OME412422 - Small
Replacement dust boot part numbers: Nitrocharger OME512422 - Large
Page 12
OME INT NO.28.1 DECEMBER 2012
COMPACT AWD - OME SPRING & SHOCK ABSORBER
LIFT
F/R
(mm)
FRONT
Terios J100 J102
20/20
2531
2532
Escape BA ZA AB
Territory SX SY AWD (4WD)
30/30
20/30
2904
2533
2905
2534
Captiva, Antara - V6 (3.2) & Diesel
20/30
2529
2530
CRV
CRV MY 2002 MY 2005
CRV RD
20/20
2535 2
-/20 CANNOT LIFT
30/30
2797
Santa Fe CM V6 (2.7) & Diesel
Santa Fe
OME Front - Cartridge, Rear - OME Gas
20/30
10/20
Sportage V6 & Diesel KM Models
Sportage JA MY02 MY03 - V6
20/20
20/30
YEAR
VEHICLE DESCRIPTION
DAIHATSU
97 to 2006
UNIT
PRICE
REAR
UNIT
PRICE
FORD
To 06/2006
04 to 10/2007
GM / OPEL
2006 on
HONDA
01/2007 on
12/01 to 01/07
10/97 to 11/01
2536
2538
2798
HYUNDAI
05/06 to 8/08
2000 to 2005
NC1601
2528
2908
OME033
2525
2523
2526
2524
2527
2907
KIA
2005 to 2009
1997 to 2003
LAND ROVER
11/00 to 1/04
To 10/2000
To 10/2000
10/20
10/20
RX-330
RX 330 4WD MCU38R MY05 - V6
20/30
2509
2510
Tribute YU MY03 MY04
30/30
2904
2905
X-Trail Petrol
X-Trail Diesel
X-Trail: Front - Petrol - OME506, Diesel - OME507
OME Strut to Suit OME Springs
25/25
25/25
20/30
2511
2513
2506 / 2507
N213S+N214S
2512
2512
2508
N215S+N216S
Forester MY03 MY04 MY05
Outback 4th Gen MY04 MY05 MY06 4Cyl
Outback 4th Gen MY04 MY05 MY06 6Cyl
20/20
20/20
20/20
2519
2516
2517
2520
2518
2518
Kluger / Highlander MCU20R - V6
Rav 4 LWB ACA33R - 4 Cylinder
Rav 4 SWB & LWB ACA20R ACA21R - Diesel
Rav 4 SWB & LWB ACA20R ACA21R - Petrol
OME Struts / Gas Shocks to Suit OME Springs
Rav 4 LWB SXA11R MY98 MY99 - Petrol
OME Struts / Gas Shocks to Suit OME Springs
Rav 4 SWB SXA11R MY98 MY99 - Petrol
OME Struts / Gas Shocks to Suit OME Springs
20/20
30/30
40/40
40/40
2509
2539
2799
2793
No longer Available
25/25
2793
No longer Available
25/25
2793
No longer Available
10/20
2502
2504
No longer Available
2503
2505
Freelander V6 & 2Ltr Diesel DOHC - Wagon
Freelander 4 Cylinder Petrol Wagon
OME Cartridge to Suit OME Springs
Freelander V6 & 2Ltr Diesel DOHC
OME Cartridge to Suit OME Springs
2500
No longer Available
NC1381
2501
NC1381
LEXUS
2003 on
MAZDA
To 06/2006
NISSAN
2007 to 2011
01 to 10/2006
01 to 10/2006
SUBARU
7/02 to 2005
9/03 to 2006
9/03 to 2006
TOYOTA
03 to 04/2007
01/2006 on
07/00 to 08/05
07/00 to 08/05
To 2000
To 2000
2510
2540
2795
2795
OME031
2794
OME031
2796
OME031
NOTES:
1.
Fitting instructions available on the Trade Resources website, www. Sellarb.com.au
2.
Check for LH wound spring.
Page 13
OME INT NO.28.1 DECEMBER 2012
LTR REMOTE CANISTERS
LTR SHOCKS
YEAR
VEHICLE DESCRIPTION
LAND ROVER
1991 to 1999 Discovery Series I
Defender & County 90, 110 & 130
1984 on
FRONT
REAR
LTR04F R&L
LTR05F
LTR05R R&L4
LTR07F
LTR07F
LTR07F
LTR02F
LTR02F
LTR07R1
LTR07R1
LTR07R1
LTR02R
LTR02R
LTR06F
LTR01F
LTR01F
LTR08FL/FR
LTR06R R&L2
LTR03R R&L2
LTR01R R&L2
LTR09R R&L
LTR04R
NISSAN
2/2000 on
97 to 1/2000
1997 on
To 8/1989
9/1989 on
Patrol Y61 (GU) Series II SWB & Wagon
Patrol Y61 (GU) Series I Wagon & SWB
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
TOYOTA
3/1998 on
3/1998 on
4/90 to 1998
1999 to 2006
9/97 to 2004
LandCruiser 100 Series (IFS)
LandCruiser 105 Series (Front Live Axle)
LandCruiser 80 Series
LandCruiser 78 & 79 Series (6 cylinder models only)
HiLux LN172, LN167, KZN165, RZN174 &
RZN169 (IFS)
LTR08RL/RR3
NOTES:
1. FK18 rear sway bar extension bracket for all models without detachable sway bar and FK24 for all models with detachable
sway bar are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop.
2. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber.
OME662 suits models with 34mm diameter. OME664 suits models with 43mm diameter.
3. Fitment of OME663 stone flap kit is mandatory to prevent damage to piston rod from stone peppering.
4. LTR05R suits early model defenders where the fuel pump is not mounted inside of the right rear mud guard.
Note:
Replacement dust boot part numbers: LTR OME512422 - Large
Replacement dust boot part numbers: LTR OME412422 - Small
GASSING REMOTE CANISTER SHOCK ABSORBERS
The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve,
part number 2755, from Schrader Automotive Inc is required to guarantee correct pressure
is reached. When using a Schrader valve to gas your LTR Shock absorber first set the
pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end
of the remote canister. Gas the canister until the shock absorber shaft is fully extended,
hold gas pressure for 30 seconds, release Schrader valve and remove.
Note: This can be done for you by your Old Man Emu Stockist.
Important: Gassing of your LTR shock absorber should be carried out before fitment to the
vehicle. If LTRs are already fitted the vehicle's suspension should be at full extension before
gassing.
MINIMUM/MAXIMUM GAS PRESSURE
On Road/Off Road
40-80psi (2.8 - 5.5 BAR)
Competition
80-100psi (5.5 - 6.9 BAR)
An increase in gas pressure firms up ride quality but will not alter ride height
MAINTENANCE
The following checks need to be carried out as part of regular vehicle maintenance.
To ensure maximum cooling of your LTR shock absorber inspect the shock absorber
body and canister for any mud and debris build up and clean if necessary
Check that the polyurethane boot is securely fastened in place and that it is not damaged.
If the boot is found to be detached thoroughly clean the shock absorber shaft and inside
the boot before reattaching it.
Ensure all polyurethane bushes, locating washers and nuts are in good condition and
securely fastened.
To ensure maximum shock absorber performance check gas pressure every 20,000km
Page 14
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP COMMANDER XK 2006 TO 2010
FRONT
Estimated Lift: 50mm
V8 PETROL & DIESEL
PART NUMBER
QTY
SPRING: TO 40 KGS
STRUT
2990
N188S
1
SPRING: 41 TO 100 KGS
STRUT
2991
N188S
1
REAR
Estimated Lift: 55mm
UNIT
PRICE $
1
2
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: LIGHT LOAD
NITROCHARGER
2992
N190
SPRING: MEDIUM LOAD
NITROCHARGER
2993
N190
1
2
1
2
UNIT
PRICE $
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
JEEP GRAND CHEROKEE WH / WK TO 2010
FRONT
Estimated Lift: 50mm
V8 PETROL & DIESEL
PART NUMBER
QTY
SPRING: TO 40 KGS
STRUT
2990
N188S
1
SPRING: 41 TO 100 KGS
STRUT
2991
N188S
1
REAR
Estimated Lift: 55mm
UNIT
PRICE $
1
2
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER
2992
N190
SPRING: HEAVY LOAD
NITROCHARGER
2993
N190
1
2
1
2
UNIT
PRICE $
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
Page 15
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP GRAND CHEROKEE WJ & WG
FRONT
Estimated Lift: 40mm
SPRING: TO 40 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 41 TO 90 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STABILISER BAR
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: HEAVY LOAD
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
V6 & V8 PETROL ENGINES
PART NUMBER
QTY
2935
60087
N111
1
2
2
1
2
2
2936
60087
N111
OMEWJPF10
OMESTAB1
1
DIESEL ENGINE
UNIT
PRICE $
PART NUMBER
QTY
2936
60087
N111
1
2
2
1
2
2
2936
60087
N111
OMEWJPF10
-
1
2
UNIT
PRICE $
2
1
-
ALL MODELS
PART NUMBER
QTY
2944
60088
N117
1
2
2
1
2
2
2945
60088
N117
OMEWTJPR10
UNIT
PRICE $
REMARKS:
1
i a lighter
li ht rate
t OME replacement
l
t stabiliser
t bili
b which
hi h is
i a recommended
d d fitment
fit
t so maximum
i
id
OMESTAB1 is
bar
ride
quality improvement can be obtained. (OMESTAB1 does not suit 2.7 Diesel Models).
2
Add 1 only OMEWJPF10 Trim Packer to increase ride height for vehicles with bull bar and winch.
JEEP GRAND CHEROKEE ZJ
FRONT
Estimated Lift: 20 - 25mm
SPRING: TO 40 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 41 TO 90 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
COIL PACKER
REAR
Estimated Lift: 20 - 25mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER
6 CYLINDER & V8 ENGINES
PART NUMBER
2931
2934
60092
N39
QTY
1
UNIT
PRICE $
1
2
2
2930
2934
60092
N39
OMESD40
OMEJGF10
1
1
2
2
2
1
REMARKS:
1 2931 and 2930 suit 6 cylinder Models.
2934 suits V8 Models.
2
OMESD40 will only fit left hand drive
Models.
ALL MODELS
PART NUMBER
QTY
2940
60093
N40
1
2
2
1
2
2
2943
60093
N40
OMEJGR10
Page 16
UNIT
PRICE $
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP CHEROKEE XJ WAGON 1984 ON
FRONT
PETROL & DIESEL ENGINES
Estimated Lift: 35 - 45mm
PART NUMBER
SPRING:
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
2930
60052
N35
OMEJGF10
OMESD40
REAR
QTY
1
3
2
3
1
5
PART NUMBER
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
CS034RA / B
60053
N36
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
CS035RA / B
60053
N36
OE
OMEU60
OMEU57
XJGK01
D22XL
UCB8
U BOLTS
GEARBOX PACKER KIT
EXTRA LEAF
CENTRE BOLT
XJ Models fitted with a 3 bolt engine
exhaust pipe flange, can experience a
clearance problem with the tail shaft,
when suspension is under full deflection.
Fitment of an adjustable front panhard
rod or a change to the smaller 2 bolt
flange will provide the required
clearance.
UNIT
PRICE $
ALL MODELS
Estimated Lift: 50mm
Warning:
QTY
2
REMARKS:
UNIT
PRICE $
1+1
2
2
2
1
1+1
2
1
4
4
1
2
2
OMEU60 suits Dana 35 type
differential - Australian Models.
OMEU57 suits AMC 8 1/4 type
differential.
Trimming requirement greater than
10mm use A/A fitment. Where near
level rake is desired B/B fitment should
be used. D22XL extra leaf can be
fitted to CS034RA/B and CS035RA/B
for heavier constant load carrying
ability. NB: Models fitted with OE Up
Country Suspension Pack will only be
raised by 20mm.
3
OMEJGF10 front coil packer can be
used for trimming or extra lift
purposes, using no more than 1
packer.
packer
4
Fit XJGK01 Gearbox Packer Kit should
a driveline vibration occur.
5
OMESD40 will only fit left hand drive
Models.
JEEP CHEROKEE/LIBERTY KK
FRONT
Estimated Lift: 30 - 40mm
V6 3.7L PETROL ENGINE
1
PART NUMBER
QTY
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
2926
90009
NS131
1
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT
2927
90009
NS131
REAR
Estimated Lift: 40mm
2
2.8 CRD DIESEL ENGINE
UNIT
PRICE $
2
2
ALL MODELS
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2730
60069
N132
1
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
2731
60069
N132
1
2
QTY
2927
90009
NS131
1
2790
90009
NS131
1
PART NUMBER
PART NUMBER
2
UNIT
PRICE $
2
1
2
2
REMARKS:
UNIT
PRICE $
1
Due to varying OE ride heights, some KK
Models may only achieve a 20mm lift.
2
No top mounting bushes supplied, re-use
OE bushes.
2
Page 17
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP CHEROKEE/LIBERTY KJ
FRONT
Estimated Lift: 30 - 40mm
PETROL ENGINE
1
PART NUMBER
QTY
SPRING: NO ACCESSORIES
STRUT - SPORT
STRUT
2925
90009
NS130
1
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
2926
90009
NS131
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT
2927
90009
NS131
REAR
Estimated Lift: 40mm
2
UNIT
PRICE $
2
2
QTY
2926
90009
NS130
1
2790
90009
NS131
1
2
PART NUMBER
2927
90009
NS131
1
2
DIESEL ENGINE
2
2
UNIT
PRICE $
2
1
2
2
1
2
2
ALL MODELS
PART NUMBER
QTY
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
2947
60069
N132
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2948
60069
N132
1
UNIT
PRICE $
2
2
REMARKS:
1
D to
t varying
i OE ride
id heights,
h i ht some KJ Models
M d l may only
l achieve
hi
Due
a 20
20mm lift
2
No top mounting bushes supplied, re-use OE bushes.
Page 18
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP WRANGLER TJ & TJ UNLIMITED
FRONT
Estimated Lift: 50mm
6 CYLINDER ENGINE
PART NUMBER
SPRING: TO 40 KGS
NITROCHARGER SPORT
NITROCHARGER
2932
*60047 / 60046
*N66 / N66C
SPRING: 41 TO 80 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
2933
*60047 / 60046
N66
OMEJGF10
OMESD40
REAR
Estimated Lift: 50mm
SPRING: HARD TOP
NITROCHARGER SPORT
NITROCHARGER
2941
60048
N67
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
2942
60048
N67
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2949
60049
N67
FKWTJ01
FKWTJ02
OMEWTJPR10
JWGK01
JWGK02
JWGK03
FK16
GEARBOX PACKER KIT
BUMPER STOP SPACER KIT
6
1
6
5
PART NUMBER
2941
60048
N67
TRIM PACKER
1
UNIT
PRICE $
1
2
1
2
1
2 DOOR
SPRING: SOFT TOP
NITROCHARGER SPORT
NITROCHARGER
PANHARD ROD BRACKET KIT
QTY
UNLIMITED
QTY
1
UNIT
PRICE $
PART NUMBER
2949
60049
N67
1
2
1
2949
60049
N67
-
1
2
1
1
2
6
1
2
2
1
3
1
3
4
1
2996
60049
N67
FKWTJ01
FKWTJ02
OMEWTJPR10
JWGK01
JWGK02
JWGK03
FK16
QTY
6
UNIT
PRICE $
1
2
6
1
2
1
2
2
1
3
1
3
4
1
REMARKS:
1
For ride height and trim adjustment use - Front: OMEJGF10
Rear: OMEWTJPR10
2
FKWTJ01 Panhard Rod Extension Bracket Kit fitment to right hand drive or FKWTJ02 to left hand drive Models is
mandatory to ensure correct rear axle tracking.
3
A Gear Box Packer Kit is mandatory fitment to prevent driveline vibration.
JWGK01 suits all Models to 2003.
JWGK02 suits manual Models from 2003.
JWGK03 suits auto Models from 2003.
4
FK16: Mandatory fitment 20mm Bump Stop Spacer Kit to prevent coil springs becoming solid on full
compression.
5
OMESD40 only suitable for fitment to left hand drive Models.
6
To achieve optimal vehicle balance front to rear when Rear Spring 2949 is fitted, it is recommended that
only 60047 is fitted to the front.
Page 19
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP WRANGLER YJ 1986 - 1996
FRONT
Estimated Lift: 40 - 50mm
PETROL ENGINE
PART NUMBER
QTY
SPRING: TO 35 KGS: 50mm
NITROCHARGER SPORT
NITROCHARGER
CS014F
60098
N33
SPRING: TO 95 KGS: 40mm
NITROCHARGER SPORT
NITROCHARGER
CS014F
60098
N33
OMESB57
OMESB87
JWGK01
OMEGS11
OMESD40
D23XL
2
2
2
2
2
2
SPRING BUSH KIT
GEAR BOX PACKER KIT
GREASABLE SHACKLE KIT
STEERING DAMPER
EXTRA LEAF
REAR
Estimated Lift: 50mm
SPRING: HARD TOP
MEDIUM LOAD TO 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: SOFT TOP
LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
2
2
1
1
1
1
2
2
3
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS036R
2
60099
N34
2
2
CS037R
2
60099
N34
OMESB57
OMESB87
OMEGS11
D24XL
2
2
2
2
2
1
2
UNIT
PRICE $
REMARKS:
1
JWGK01 fitment reduces driveline vibration.
2
Use OMESB57 with original shackles. OMESB87 with OMEGS11 greasable shackles.
3
OMESD40 will only fit left hand drive Models.
Page 20
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP WRANGLER JK 2 DOOR 2006 ON
FRONT
Estimated Lift: 50 mm
SPRING: NO BAR
SPRING: BAR
SPRING: BAR AND WINCH
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
STEERING STABILIZER MOUNT KIT - LEFT
HAND DRIVE
TRIM PACKER
CASTOR CORRECTION KIT
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
PANHARD ROD EXTENSION BKT KIT LEFT HAND DRIVE
PANHARD ROD EXTENSION BKT KIT RIGHT HAND DRIVE
TRIM PACKER
SUSPENSION
KIT
Estimated Lift: 100mm
4" COMPLETE LIFT KIT
V6 PETROL ENGINE
PART NUMBER
QTY
2626
2615
2627
60066
*N196 / N211
OMESD48
1
1
1
2.8 DIESEL ENGINE
UNIT
PRICE $
PART NUMBER
3
1
2627
2616
2628
60066
*N196 / N211
OMESD48
FK50
3
1
OMEJKPF10
FK53
6
1
1
1
1
2
QTY
1
1
1
UNIT
PRICE $
1
1
1
2
3
1
FK50
3
1
OMEJKPF10
FK53
6
1
ALL MODELS
PART NUMBER
QTY
2630
2617
60067
*N198 / N212
1
1
1
1
UNIT
PRICE $
2
FK37
2
1
FK39
2
1
OMEJKPR10
PETROL ENGINE RHD MODELS PETROL ENGINE LHD MODELS
4
4
PART NUMBER
OMEJK4RHD
QTY
5
UNIT
PRICE $
1
PART NUMBER
OMEJK4
QTY
5
UNIT
PRICE $
1
REMARKS:
1
For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10
Do not fit more than 1 packer per coil spring.
2
Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
the panhard rod to its original position.
3
FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48.
4
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust
at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a
greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links
and control arms.
5
Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front
Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Disconnect Kit, 1 x Castor & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models),
2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See Page 23 for kit breakdown.
6
FK53 Caster Kit will increase caster angle by 2o. Check manufacturer's specification if Caster Kit is required.
Page 21
OME INT NO.28.1 DECEMBER 2012
CHRYSLER JEEP
JEEP WRANGLER JK UNLIMITED 2006 ON
FRONT
Estimated Lift: 50 mm
SPRING: NO BAR
SPRING: BAR
SPRING: BAR AND WINCH
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
STEERING STABILIZER MOUNT KIT - LEFT
HAND DRIVE
TRIM PACKER
CASTOR CORRECTION KIT
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 150KGS
SPRING: CONSTANT 300KGS
NITROCHARGER SPORT
NITROCHARGER
PANHARD ROD EXTENSION BKT KIT LEFT HAND DRIVE
PANHARD ROD EXTENSION BKT KIT RIGHT HAND DRIVE
TRIM PACKER
SUSPENSION
KIT
Estimated Lift: 100mm
4" COMPLETE LIFT KIT
V6 PETROL ENGINE
PART NUMBER
2627
2616
2628
60066
*N196 / N211
OMESD48
QTY
UNIT
PRICE $
2.8 DIESEL ENGINE
PART NUMBER
3
1
2628
2619
2629
60066
*N196 / N211
OMESD48
FK50
3
1
OMEJKPF10
FK53
6
1
1
1
1
1
1
1
2
QTY
1
1
1
UNIT
PRICE $
1
1
1
2
3
1
FK50
3
1
OMEJKPF10
FK53
6
1
ALL MODELS
PART NUMBER
2617
2618
2620
60067
*N198 / N212
QTY
1
1
1
UNIT
PRICE $
1
1
1
2
FK37
2
1
FK39
2
1
OMEJKPR10
4
4
PETROL ENGINE RHD MODELS
PETROL ENGINE LHD MODELS
PART NUMBER
OMEJK4RHD
QTY
5
UNIT
PRICE $
1
PART NUMBER
OMEJK4
QTY
5
UNIT
PRICE $
1
REMARKS:
1
For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10
Do not fit more than 1 packer per coil spring.
2
Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
the panhard rod to its original position.
3
FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48.
4
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at
full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a
greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links
and control arms.
5
Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front
Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Disconnect Kit, 1 x Castor & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models),
2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See page 23 for kit breakdown.
6
FK53 Caster Kit will increase caster angel by 2o. Check manufacturer's specification if Caster Kit is required.
Page 22
OME INT NO.28.1 DECEMBER 2012
OFF ROAD USE ONLY - CHRYSLER
JEEP WRANGLER JK
COMPLETE KIT
100mm (4 Inch) LIFT KIT
100mm (4 Inch) LIFT KIT
PART NUMBER QTY
OMEJK4RHD
OMEJK4
UNIT
COMMENTS
PRICE $
PETROL ENGINE RHD MODELS
PETROL ENGINE LHD MODELS
1
1
KIT INCLUDES:
2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged Panhard, 1
x Bump Stop Kit, 1 x Brakeline Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Dis-Connect Kit, 1 x Castor &
Driveline Kit, 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
FRONT
PART NUMBER QTY
UNIT
PRICE $
COMMENTS
COILS
100mm LIFT - PETROL
100mm LIFT - DIESEL
2642
3047
1
1
60066M
60066L
2
2
OMESD48
1
FK53
FK49
FK46
FK48
3460010
PANRJK001
FK40
OMEJKPF10
1
1
1
1
2
1
1
SHOCKS
NITROCHARGER SPORT - MID LENGTH
NITROCHARGER SPORT - LONG
STEERING DAMPER
STABILISER
COMPONENTS
CASTOR KIT
CASTOR & DRIVELINE KIT
BRAKELINE RELOCATION KIT (F&R)
SWAY BAR LINK DIS-CONNECT KIT (F&R)
FRONT SWAY BAR LINK
ADJUSTABLE FRONT PANHARD ROD
BUMP STOP EXTENSION KIT (F&R)
TRIM PACKER
REAR
Front caster only, increases caster by 2o
Adjust front caster and rear pinion angle
Suits 100mm lift
Link only
only, suits 100mm lift
Forged
10mm
PART NUMBER QTY
UNIT
PRICE $
COMMENTS
COILS
100mm LIFT - MEDIUM
100mm LIFT - CONSTANT 300KG
2643
3046
1
1
60067L
2
SHOCKS
NITROCHARGER SPORT - LONG
COMPONENTS
REAR PANHARD BRACKET KIT
REAR SWAY BAR LINK
TRIM PACKER
FK47
FK47RHD
3460011
OMEJKPR10
1
2
LHD, suits 100mm lift
RHD, suits 100mm lift
Link only, suits 100mm lift
Notification: Modifications for off - road use only
The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public
road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the
customer.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and will depend on vehicle weights.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition
racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent
any future misunderstanding.
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full
droop.
When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a
greater
t offset
ff t (less
(l
backspacing)
b k
i ) to
t ensure that
th t sufficient
ffi i t clearance
l
is
i given
i
between
b t
the
th tyre
t
to
t sway bar,
b sway bar
b
links and control arms.
Page 23
OME INT NO.28.1 DECEMBER 2012
FORD
RANGER PX 2011 ON
FRONT
Estimated Lift: 50mm
DIESEL ENGINE
PART NUMBER
SPRING: No Bar
STRUT SPORT
QTY
2997
90019
1
2998
*90020 / 90019
1
SPRING: Bar / Winch
STRUT SPORT
2999
90020
1
SPRING: No Bar: 30mm LIFT
STRUT SPORT
TRIM PACKER
3048
90019
FK56
SPRING: Bar
STRUT SPORT
REAR
Estimated Lift: 50mm
1
UNIT
PRICE $
1
2
1
2
1
2
1
2
2
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
CS049R
*60101 / 60023
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
CS068R
*60102 / 60101
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
GREASABLE SHACKLE KIT
CS069R
60102
OMEGS20
OMESB102
OMESB103
OMEU66
OMEU66A
OMEU66B
FK57
D34XL
SPRING BUSH KIT
U BOLTS
DRIVELINE SPACER KIT
EXTRA LEAF
QTY
4
4
4
3
4
UNIT
PRICE $
2
2
2
2
2
2
1
2
4
4
5
6
1
2
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
2
Trim Packer FK56 provides 10mm lift at the wheel.
3
OMESB102 suits OE Shackle.
OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20.
4
Use OMEU66 when fitting CS049R.
Use OMEU66A when fitting CS068R.
Use OMEU66B when fitting CS069R.
5
Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline.
6
D34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg.
Page 24
OME INT NO.28.1 DECEMBER 2012
FORD
RANGER PJ/PK 12/2006 TO 2011 ALL MODELS
(NOT USA MANUFACTURED MODEL)
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 60 KGS
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
REAR
Estimated Lift: 20mm
303013
303005
60022
*N194 / N187
FK22
1
1
1
2
1
1
PART NUMBER
CS056R
60023
N189
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
CS049R
60023
N189
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
GREASABLE SHACKLE KIT
CS060R 2
*60102 / 60023
N189
OMEGS18
OMEU66
OMEU66A
OMESB97
D34XL
SPRING BUSH KIT
EXTRA LEAF
4
Note: Some South American Models,
UNIT
PRICE $ built in Argentina, use torsion bars with
hexagonal ends. Above OME
suspension is not suitable for these
Models.
1
FK22 Front Shock Absorber Upper
Mount Support Bracket Kit is a
mandatory fitment.
2
Include tray weight in constant load
calculation.
3
Use OMEU66 when fitting CS056R and
CS049R. Use OMEU66A when fitting
CS060R.
4
For Models with 2.5TD engine measure
length of Torsion Bar to determine
correct fitment.
ALL MODELS
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
QTY
REMARKS:
2
QTY
3
UNIT
PRICE $
2
2
2
3
2
2
3
303005 - 925mm.
303013 - 1024mm.
2
2
1
3
4
2
2
COURIER/RANGER 1 TONNE
1985 - 2005 ALL MODELS (NOT USA MANUFACTURED MODEL)
FRONT
TORSION BARS: OVER 60 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
REAR
Estimated Lift: 20mm
PETROL & DIESEL ENGINES
PART NUMBER
QTY
303005
60022
N51
FK22
1
1
2
1
1
UNIT
PRICE $
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS026R
60023
N53
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
GREASABLE SHACKLE KIT
SPRING BUSH KIT
EXTRA LEAF
CENTRE BOLT
CS027R
60023
N53
OMEU65
OMEGS18
OMESB82
D9XL
UCB17
QTY
2
UNIT
PRICE $
1
FK22 Support Brackets must be
installed to upper front shock mounting
brackets on late 1996 On Models
manufactured in Thailand.
2
Include tray weight in constant load
calculation.
2
2
2
REMARKS:
2
2
4
1
2
2
2
Page 25
OME INT NO.28.1 DECEMBER 2012
FORD
FORD EXPLORER 1996 - 2001 REAR LEAF SPRING MODELS
FRONT
V6 PETROL ENGINE
PART NUMBER
TORSION BARS
NITROCHARGER
N16
QTY
UNIT
PRICE $
SPRING: MEDIUM LOAD
NITROCHARGER
EXTRA LEAF
CENTRE BOLT
1
Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars. Important: A minimum of 60mm
of droop must be maintained.
2
OE spring bushes are required to fit
CS042R springs. D10XL extra leaf
should be fitted when a constant 200kg
plus load is carried.
1
2
REAR
Estimated Lift: 40 mm
REMARKS:
PART NUMBER
CS042R
N17
D10XL
UCB5
QTY
2
UNIT
PRICE $
2
2
2
2
FORD F250 & F350 2005 - 2008 ALL MODELS
FRONT
Estimated Lift: 45mm
SPRING: TO 100 KGS
NITROCHARGER
CASTER CORRECTION KIT
REAR
Estimated Lift: 60+mm
SPRING: MEDIUM LOAD
THIRD STAGE
SPRING:CONSTANT 600+KGS
XL LEAF
CENTRE BOLT
NITROCHARGER
U BOLTS - NO OVERLOAD LEAF
U BOLTS - WITH OVERLOAD LEAF
FITTING KIT
SPACER KIT
V8 DIESEL: COIL SPRING
PART NUMBER
QTY
2768
N195
FK36
1
2
1
4
UNIT
PRICE $
ALL MODELS LEAF SPRING
PART NUMBER
CS048R
TSXL01
CS048R
D27XL
UCB10
N179
OMEU68
OMEU67
FK31
FK35
OMESK1
QTY
1
2
2
2
2
2
2
4
4
3
1
3
1
1
1
1
2
1
UNIT
PRICE $
REMARKS:
1
Springs are supplied with bushes fitted.
Where the OE spring has an overload leaf fitted, it must be replaced with a TSXL01 and the CS048R original
centre bolt replaced by a UCB10, the original spacing block must also be re-fitted using U Bolts OMEU67.
2
To maintain 60mm lift for loads over constant 600 KGS and add D27XL Extra Leaf.
3
Fitment of Driveline Spacer Kit FK31 for Crew Cab or FK35 for Xtra Cab is recommended to reduce possible
driveline vibration. If required, additional spacing down of the centre bearing can be achieved by using an
OMESK1 Spacer Kit.
4
Fitment of a FK36 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It is
advisable to have a Front End Alignment carried out to determine if an FK36 kit is required.
Page 26
OME INT NO.28.1 DECEMBER 2012
FORD
FORD F250 & F350 1999 - 2004 ALL MODELS
FRONT
Estimated Lift: 60mm
SPRING: TO 150 KGS
NITROCHARGER
ADJUSTABLE PANHARD ROD
U BOLTS - USA MODELS
U BOLTS - BRAZIL MODELS
REAR
Estimated Lift: 60mm
F250 PETROL & DIESEL
PART NUMBER
CS018F
N178
APRF250
OMEU69
OMEU69A
OMEU70
OMEU70A
1
QTY
6
1
SPRING: TO 600 KGS
THIRD STAGE
NITROCHARGER - SINGLE FITMENT
NITROCHARGER - DUAL FITMENT
CS048R
N179
N179 + N180
2
SPRING: CONSTANT 600 KGS
XL LEAF
THIRD STAGE
NITROCHARGER - SINGLE FITMENT
NITROCHARGER - DUAL FITMENT
U BOLTS
CS048R
D27XL
N179
N179 + N180
OMEU68
FK31
FK35
OME660
STONE GUARD KIT
2
3
2
2
2+2
2
2
2
2+2
4
4
1
2
1
1
QTY
6
1
OMEU69
UNIT
PRICE $
2
2
1
4
-
F250 ALL MODELS
QTY
PART NUMBER
CS018F
N178
APRF250
2
2
1
2
2
2
2
PART NUMBER
FITTING KIT
UNIT
PRICE $
F350 PETROL & DIESEL
UNIT
PRICE $
F350 ALL MODELS
PART NUMBER
CS048R
TSXL01
N179
CS048R
D27XL
TSXL01
N179
OMEU67
FK31
FK35
OME660
QTY
5
5
5
3
5
UNIT
PRICE $
2
2
2
2
2
2
2
4
4
1
2
1
REMARKS:
1
APRF250 Adjustable Panhard Rod must be fitted to allow original axle location to be restored, bushes are
supplied in rod.
2
For Models with dual shock fitment N179 must be fitted rear of the axle, as it is longer than the N180.
OME660 Stone Shields are also a recommended fitment to the rear shocks.
3
To help maintain 60mm lift, add one D27XL Extra Leaf for every 400kgs carried over 600kgs.
4
Fitment of FK31 to Crew Cab or FK35 to Xtra Cab Models is recommended to reduce possible driveline vibration.
5
As the CS048R has a different spring camber, compared to the original spring, the overload leaf must be
replaced with a TSXL01. The Original spacing block must be refitted. Springs are supplied with bushing.
6
Springs are supplied with bushing.
Page 27
OME INT NO.28.1 DECEMBER 2012
HOLDEN / ISUZU / GM
JACKAROO/TROOPER & MONTEREY 3/2001 - 2004
SWB & LWB
FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
60031
*N65 / N26F
QTY
UNIT
PRICE $
1
2
REAR
Estimated Lift: 20mm
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2919
60074
N15
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
2929
60074
N15
QTY
2
UNIT
PRICE $
1
2
1
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
2
Coil must be installed with progressive rate to the top.
JACKAROO/TROOPER & MONTEREY 1992 - 2/2001
SWB & LWB
FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
60031
*N65 / N26F
QTY
UNIT
PRICE $
1
2
REAR
Estimated Lift: 25mm
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2912
60074
N15
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
2919
60074
N15
QTY
2
UNIT
PRICE $
1
2
1
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
2
Coil must be installed with progressive rate to the top.
Page 28
OME INT NO.28.1 DECEMBER 2012
HOLDEN / ISUZU / GM
JACKAROO/ISUZU TROOPER 1982 - 3/1992
ALL MODELS
FRONT
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
ANTI INVERSION KIT
GREASABLE SHACKLE KIT
303004
60031
*N65 / N26F
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
CS028R
60009
60032
N88
*N42 / N89
2
UNIT
PRICE $
2
2
2
CS029R
*60063 / 60009
*60064 / 60032
N88
N42
OMESB80
OMEU59A
FK14
OMEGS13
2
2
2
2
3
4
2
4
1
1
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Torsion Bar 303004 suit Models from 8/88 To 3/92 only.
Important: A minimum of 60mm of droop must be maintained.
2
60009 / 60063 / N88: Suits 11/'86 To 3/'92 Models and requires OMEB11 Bush Kit to convert lower bush
from 19mm to 16mm ID.
60064 / 60032 / N42 / N89: Suits Models '82 To 10/'86 (no bush kit required).
3
Where the OE spring has 4 leaves OMEU59A U Bolts are required.
4
FK14 Anti Inversion Kit must be fitted if greasable shackles are not fitted.
GM FRONTERA 5 DOOR 1999 - 6/2003 (USA - ISUZU RODEO WAGON)
FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER
60031
*N65 / N26F
QTY
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
2913
N102
1
2
Page 29
UNIT
PRICE $
OME INT NO.28.1 DECEMBER 2012
HOLDEN / ISUZU / GM
GM FRONTERA 1995 - 1998 (USA - ISUZU RODEO WAGON)
2 & 4 DOOR UT MODELS
FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
QTY
60031
*N65 / N26F
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
2912
60074
N15
1
2
2
UNIT
PRICE $
D-MAX 2012 ON ALL MODELS
COLORADO 2012 ON ALL MODELS
FRONT
Estimated Lift: 30mm
SPRING: No Bar
STRUT SPORT
SPRING: Bar
STRUT SPORT
SPRING: Bar / Winch
STRUT SPORT
TRIM PACKER
REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
DIESEL ENGINE
PART NUMBER
3056
90022
1
3057
*90023 / 90022
1
3058
90023
OME95PF5
ALL MODELS
PART NUMBER
QTY
EL072R
60116
2
2
2
2
2
2
1
EL073R
*60117 / 60116
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
GREASABLE SHACKLE KIT
EL074R
60117
OMEGS14
OMESB98
OMESB107
OMEU53A
EL39XL
U BOLTS
EXTRA LEAF
UNIT
PRICE $
1
2
1
2
1
2
1
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
QTY
2
2
3
4
2
UNIT
PRICE $
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
2
OMESB98 Bush Kit suits OME Greasable Shackle, OMEGS14.
OMESB107 Bush Kit suits OE Shackle.
3
If fitting extra leaf to EL074R, use U Bolt OMEU53B.
Page 30
OME INT NO.28.1 DECEMBER 2012
HOLDEN / ISUZU / GM
D-MAX 2008 - 2011 ALL MODELS
COLORADO RC 2008 - 2011 ALL MODELS
RODEO RA 2003 - 2011 ALL MODELS (NOT USA MANUFACTURED MODEL)
FRONT
PETROL ENGINE
PART NUMBER
TORSION BARS - NO LOAD
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 30 - 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
ANTI INVERSION KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
303012
60031
N65
N150
QTY
1
2
DIESEL ENGINE
UNIT
PRICE $
303012
60031
1
2
N65
ALL MODELS
PART NUMBER
CS062R
60032
*N42 / N89
QTY
3
PART NUMBER
3
UNIT
PRICE $
2
Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars. Important: A minimum of 60mm
of droop must be maintained. It has
been found, due to vehicle
manufacturing tolerances, that in some
cases front shock absorbers may
contact the steering arm when on full
lock. Fitter should check for this and
where required a small indentation
should be made to the body of the
shock absorber. 303012 torsion bars
have a lighter rate than OE and
improve ride comfort for vehicles with
no front accessory weight
weight. Due to their
heavy rate, the OE torsion bars are
suitable for vehicles with front
accessory weight.
2
Fit N65 when installing 303012 torsion
bar to petrol Models and N150 for OE
torsion bars.
3
Include tray weight in constant load
calculation. CS062R and CS063R can
be installed to high height 4x2 Models.
OME leaf does not fit low height 4x2
Models.
4
FK26 only needed if not fitting
Greasable Shackle Kit.
2
2
2
4
1
1
2
Page 31
1
REMARKS:
2
4
1
UNIT
PRICE $
1
2
CS063R
*60064 / 60032
N42
OMESB80
OMEU66
FK26
OMEGS13
D26XL
QTY
OME INT NO.28.1 DECEMBER 2012
HOLDEN / ISUZU / GM
RODEO/D-MAX TO 2003 ALL MODELS (NOT USA MANUFACTURED MODEL)
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 20mm
303004
60031
*N65 / N26F
QTY
1
1
1
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS028R
60032
*N42 / N89
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
ANTI INVERSION KIT
GREASABLE SHACKLE KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT
CS029R
60064
N42
OMESB80
FK14
OMEGS13
OMEU59A
D19XL
UCB16
2
QTY
3
REMARKS:
UNIT
PRICE $
3
4
2
Include tray weight in constant load
calculation.
3
FK14 must be fitted if OMEGS13
greasable shackles are not fitted.
4
Vehicles with 4 Leaf OE spring stack
require U bolts OMEU59A.
2
2
3
Raise or lower front end clearance and trim
vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop
must be maintained.
2
2
2
1
2
1
1
4
2
2
DROVER ALL MODELS (NOT USA MANUFACTURED MODEL)
FRONT
Estimated Lift: 40mm
PART NUMBER
QTY
SPRING: TO 35 KGS
NITROCHARGER
CS012FA / B
OME015
SPRING: 35 TO 75 KGS
NITROCHARGER
SPRING BUSH KIT
CS013FA / B
OME015
OMESB19
OMEU61
OMEU62
FK06
TP05
OMESD30
1+1
2
1+1
2
2
4
1
1
U BOLTS
FITTING KIT
TRIM PACKER
STEERING DAMPER
REAR
Estimated Lift: 40mm
1
UNIT
PRICE $
REMARKS:
1
1
One only OMEU62 may be required on the
right hand side inner, on some Models.
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER
CS038R
OME013
SPRING: CONSTANT 100 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
TRIM PACKER
CS039R
OME013
OMESB19
OMEU61
TP05
2
2
2
2
2
4
Page 32
UNIT
PRICE $
`
OME INT NO.28.1 DECEMBER 2012
HUMMER
H3
FRONT
Estimated Lift: 20mm
TORSION BARS
NITROCHARGER SPORT
REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
EXTRA LEAF
ALL MODELS
PART NUMBER
303014
90001
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
CS059R
60045
D36XL
QTY
2
UNIT
PRICE $
2
2
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
It is important that a minimum of 60mm droop is maintained to prevent topping out of the front shock absorbers.
2
Springs supplied with bushings.
Page 33
OME INT NO.28.1 DECEMBER 2012
HYUNDAI
TERRACAN 2001 ON
FRONT
Estimated Lift: 10mm
PETROL ENGINE
PART NUMBER
QTY
60040
2
TORSION BARS
NITROCHARGER SPORT
REAR
Estimated Lift: 20mm
DIESEL ENGINE
UNIT
PRICE $
PART NUMBER
QTY
60040
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
2603
60060
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
2604
60060
1
2
1
2
UNIT
PRICE $
KIA
SORENTO BL TO 2009
FRONT
Estimated Lift: 20mm
SPRING:
SPRING: 20 TO 60 KGS
STRUT
REAR
Estimated Lift: 30mm
SPRING: LIGHT LOAD
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER
ALL MODELS
PART NUMBER
QTY
2902
2601
N148S
N147S
2
LHS
RHS
1
1
1+1
REMARKS:
UNIT
PRICE $
1
2
LATE 2006 ON MODELS
PART NUMBER
QTY
MODELS 2003 TO LATE 2006
UNIT
PRICE $
PART NUMBER
2622
N205
OME661 Stone Guards are recommended
fitment to vehicles driven on dirt roads to
prevent stone damage to the shock
absorbers.
N147S fits RHS, N148S fits LHS.
No top mounting bushes supplied, reuse OE bushes.
1
2
QTY
2602
N149
1
2903
N149
1
UNIT
PRICE $
1
2
1
2
LADA
NIVA
FRONT
REMARKS:
Estimated Lift: 30mm
1
SPRING:
NITROCHARGER
TRIM PACKER
REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER
PART NUMBER
2791
NOT AVAILABLE
OMELNF10
QTY
1
UNIT
PRICE $
2010 On Models front lift less than
30mm.
1
ALL MODELS
PART NUMBER
QTY
2792
NOT AVAILABLE
1
Page 34
UNIT
PRICE $
OME INT NO.28.1 DECEMBER 2012
LAND ROVER
DISCOVERY 3 2005 ON ALL COIL MODELS
FRONT
Estimated Lift: 50mm
SPRING:
SPRING: 100 KGS +
STRUT
PETROL & DIESEL ENGINES
PART NUMBER
QTY
2744
2745
USE OE
1
1
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 200 KGS
STRUT
UNIT
PRICE $
1
ALL MODELS
PART NUMBER
QTY
2746
2743
USE OE
1
1
UNIT
PRICE $
1
REMARKS:
1
Coils are suitable to be used with original OE struts, OME will not be developing replacement struts.
DISCOVERY 1999 - 2004 ALL COIL SUSPENSION MODELS
FRONT
Estimated Lift: 40mm
PETROL & DIESEL ENGINES
PART NUMBER
SPRING: TO 20 KGS
NITROCHARGER SPORT
NITROCHARGER
2776
60024
*N107 / N107C
SPRING: 21 TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
2777
60024
*N107 / N107C
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
COIL PACKER
2779
60024
N107
OMESD02
OMELRCP2
REAR
Estimated Lift: 40mm
QTY
1
UNIT
PRICE $
1
2
1
1
2
1
1
2
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2781
60026
N108
1
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
2762
60025
N108
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER
2763
60025
N108
OMELRCP1
1
UNIT
PRICE $
2
2
2
2
REMARKS:
1
On 2003 Models lift will be between 25 to 35mm.
2
8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.
Page 35
OME INT NO.28.1 DECEMBER 2012
LAND ROVER
DISCOVERY TO 1998 & RANGE ROVER TO 5/19953
FRONT
Estimated Lift: To 40mm
PETROL ENGINES
PART NUMBER
QTY
SPRING: TO 20 KGS: 20mm
NITROCHARGER SPORT
NITROCHARGER
2760
60037
*N115 / N45F
1
SPRING: TO 50 KGS: 30mm
NITROCHARGER SPORT
NITROCHARGER
2761
60037
*N115 / N45F
1
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
2767
60037
N115
OMESD11
CALR1
CALR2
OMELRCP1
1
CASTER KIT
COIL PACKER
REAR
Estimated Lift: 40mm
UNIT
PRICE $
DIESEL ENGINES
PART NUMBER
UNIT
PRICE $
-
2
2751
60037
*N115 / N45F
2
2767
60037
N115
OMESD11
CALR1
CALR2
OMELRCP1
2
1
1
QTY
1
2
1
2
1
2
1
1
1
2
ALL MODELS
PART NUMBER
QTY
2764
60038
N46
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
2762
60039
*N44 / N46
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER
2763
60039
N44
OMELRCP1
UNIT
PRICE $
2
1
2
1
2
2
REMARKS:
1
CALR1 : Fits pre '86 Range Rover.
CALR2 : Fits post '86 Range Rover, all Discovery and Defender 130 Dual Cab Utility.
NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems.
2
8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.
3
Not suitable for Models with air suspension.
Page 36
OME INT NO.28.1 DECEMBER 2012
LAND ROVER
DEFENDER & COUNTY 110
FRONT
Estimated Lift: To 40mm
SPRING: TO 50 KGS: 30mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
COIL PACKER
FRONT
Estimated Lift: To 40mm
SPRING: TO 50 KGS: 30mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
COIL PACKER
REAR
Estimated Lift: To 55mm
V8 PETROL ENGINES
PART NUMBER
2761
60037
N45F
QTY
UNIT
PRICE $
2
1
2766
60037
N115
OMESD32
1
CALR1
1
1
2
1
PART NUMBER
2766
60037
*N115 / N45F
1
1
2751
60037
N115
OMESD32
CALR1
CALR2
OMELRCP1
3.9 ISUZU DIESEL ENGINES
OMELRCP1
4
QTY
1
UNIT
PRICE $
1
2
1
1
2
1
1
4
2.5 DIESEL ENGINES
PART NUMBER
QTY
2751
60037
N45F
1
2767
60037
N115
OMESD32
CALR1
CALR2
OMELRCP1
1
UNIT
PRICE $
2
2
1
1
1
4
ALL MODELS
PART NUMBER
SPRING: LIGHT LOAD: 25mm
NITROCHARGER SPORT
NITROCHARGER
2752
60038
N46
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
2755
60039
N44
SPRING: CONSTANT 500 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER
2754
60039
N44
OMELRCP3
QTY
2
UNIT
PRICE $
1
2
1
2
3
1
2
4
REMARKS:
1
Caution: Due to altered gearbox mounts on Models after 1998 any lift above OE ride height may cause front
driveline vibration that can only be rectified by fitment of front double cardan joints.
Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.
2
2752 coil has a softer spring than OE coil. This is to provide improved ride quality with light loads only
OE springs are designated as medium load springs.
3
Original inner helper coil, where fitted, must be re-installed with OME Coils.
4
8mm Steel Coil Seat Packer, refer to selection chart supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.
Page 37
OME INT NO.28.1 DECEMBER 2012
LAND ROVER
DEFENDER 130 MODEL
FRONT
Estimated Lift: 20mm
2.5 DIESEL ENGINE
PART NUMBER
QTY
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
2751
60037
*N115 / N45F
1
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
COIL PACKER
2767
60037
N115
OMESD32
CALR2
OMELRCP1
REAR
Estimated Lift: To 40mm
UNIT
PRICE $
2
1
1
CALR1 suits 38mm wide control arms.
CALR2 suits 44mm wide control arms.
2 Important: 2755 has reduced spring rate
DIESEL ENGINE
SPRING: LIGHT LOAD: 25mm
NITROCHARGER SPORT
NITROCHARGER
2755
60039
*N44 / N46
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER
2754
60039
N44
OMELRCP3
QTY
2
UNIT
PRICE $
from OE to provide improved ride quality
for light loads. Original inner helper coil,
where fitted, must be re-installed with OME
coils.
3 8mm Steel Coil Seat Packer, refer to
1
selection chart supplied with packer.
Important: To prevent possible
overstressing of the spring, only one
packer can be fitted under each coil seat.
2
4
on Models after 1998 any lift above OE
ride height will cause front driveline
vibration that can only be rectified by
fitment of front double cardan joints.
2
3
PART NUMBER
1 Caution: Due to altered gearbox mounts
Caster Kit will increase caster angle by 2o.
Check manufacturer's specifications to
determine if Caster Kit is required.
1
1
REMARKS:
1
2
4 Original inner helper coil, where fitted, must
3
be re-installed with OME coils.
90 SERIES
FRONT
Estimated Lift: 30mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
REAR
Estimated Lift: 45 - 55mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
PETROL ENGINE
PART NUMBER
QTY
2761
60037
N45F
1
DIESEL ENGINE
UNIT
PRICE $
2
2751
60037
N115
OMESD32
CALR1
QTY
2751
60037
N115
1
2767
60037
N115
OMESD32
CALR1
1
2
1
PART NUMBER
1
1
UNIT
PRICE $
2
1
2
1
1
1
ALL MODELS
PART NUMBER
QTY
2764
60038
N46
1
2762
60039
*N44 / N46
1
UNIT
PRICE $
2
2
REMARKS:
1
Caution: Due to altered gearbox mounts on Models after 1998 any lift above OE ride height may cause front
driveline vibration that can only be rectified by fitment of front double cardan joints.
Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.
Page 38
OME INT NO.28.1 DECEMBER 2012
MAZDA
BT50 2011 ON
FRONT
Estimated Lift: 50mm
SPRING: No Bar
STRUT SPORT
SPRING: Bar
STRUT SPORT
DIESEL ENGINE
PART NUMBER
2997
90019
1
2998
*90020 / 90019
1
SPRING: Bar / Winch
STRUT SPORT
TRIM PACKER
2999
90020
FK56
SPRING: No Bar: 30mm LIFT
STRUT SPORT
3048
90019
REAR
Estimated Lift: 50mm
2
ALL MODELS
PART NUMBER
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
CS068R
*60102 / 60101
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
GREASABLE SHACKLE KIT
CS069R
60102
OMEGS20
OMESB102
OMESB103
OMEU66
OMEU66A
OMEU66B
FK57
D34XL
DRIVELINE SPACER KIT
EXTRA LEAF
1
2
1
CS049R
*60101 / 60023
U BOLTS
UNIT
PRICE $
1
2
1
2
1
2
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING BUSH KIT
QTY
QTY
4
4
4
3
4
UNIT
PRICE $
2
2
2
2
2
2
1
2
4
4
5
6
1
2
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
2
Trim Packer FK56 provides 10mm lift at the wheel.
3
OMESB102 suits OE Shackle.
OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20.
4
Use OMEU66 when fitting CS049R.
Use OMEU66A when fitting CS068R.
Use OMEU66B when fitting CS069R.
5
Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline.
6
D34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg.
Page 39
OME INT NO.28.1 DECEMBER 2012
MAZDA
BT50 1 TONNE 12/2006 - 2011 ALL MODELS
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 60 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
REAR
Estimated Lift: 20mm
303013
60022
*N194 / N187
FK22
1
2
2
2
1
PART NUMBER
CS056R
60023
N189
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
CS049R
60023
N189
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
GREASABLE SHACKLE KIT
CS060R
*60102 / 60023
N189
OMEGS18
OMEU66
OMEU66A
OMESB97
D34XL
SPRING BUSH KIT
EXTRA LEAF
1
UNIT
PRICE $ REMARKS:
1
ALL MODELS
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
QTY
QTY
3
UNIT
PRICE $
2
2 FK22 Front Shock Absorber Upper
Mount Supporting Bracket Kit is a
mandatory fitment.
3 Use OMEU66 when fitting CS056R and
2
3
Some Latin American 12/2006on
Models use 303005 torsion bars,
measuring 925mm in length. The
303013 torsion bars measure 1024mm.
Check OE torsion bar length before
ordering.
CS049R. Use OMEU66A when fitting
CS060R. Include tray weight in
constant load calculation.
2
2
3
2
2
1
3
4
2
2
B SERIES 1 TONNE 1987 - 2006 ALL MODELS
FRONT
TORSION BARS: OVER 60 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
REAR
Estimated Lift: 20mm
PETROL & DIESEL ENGINES
PART NUMBER
QTY
303005
60022
N51
FK22
1
1
2
1
1
UNIT
PRICE $ REMARKS:
1 FK22 Front Shock Absorber Upper
Mount Supporting Bracket Kit is a
mandatory fitment.
2 Include tray weight in constant load
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS026R
60023
N53
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
GREASABLE SHACKLE KIT
SPRING BUSH KIT
EXTRA LEAF
CENTRE BOLT
CS027R
60023
N53
OMEU65
OMEGS18
OMESB82
D9XL
UCB17
QTY
2
calculation.
UNIT
PRICE $
2
2
2
2
2
4
1
2
2
2
Page 40
OME INT NO.28.1 DECEMBER 2012
MITSUBISHI
PAJERO / MONTERO 2000 ON ALL LWB MODELS
FRONT
Estimated Lift: 35mm
V6 PETROL ENGINE
PART NUMBER
QTY
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
2914
90006
N129S
1
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT
2915
90007
N203S
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2
UNIT
PRICE $
2
PART NUMBER
QTY
2915
90006
N129S
1
2924
90007
N203S
1
2
2.8 & 3.2 DIESEL ENGINES
2
2
UNIT
PRICE $
2
1
2
2
ALL MODELS
PART NUMBER
2917
60019
N152
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2918
60033
*N204 / N152
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
2995
60033
N204
QTY
1
UNIT
PRICE $
1
2
1
1
2
1
2
REMARKS:
1
i recommended
d d that
th t a 4 wheel
h l alignment
li
t is
i carried
i d outt
It is
2
No top mounting bushes supplied, re-use OE bushes.
PAJERO / MONTERO 2000 ON ALL SWB MODELS
FRONT
Estimated Lift: 35mm
V6 PETROL ENGINE
PART NUMBER
QTY
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
2914
90006
*N129S / N109S
1
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT
2915
90007
*N203S / N129S
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2
UNIT
PRICE $
2
PART NUMBER
QTY
2915
90006
N129S
1
2924
90007
N203S
1
2
3.2 DIESEL ENGINE
2
2
UNIT
PRICE $
2
1
2
2
ALL MODELS
PART NUMBER
2994
60019
N152
QTY
1
UNIT
PRICE $
1
2
2917
60033
*N204 / N152
1
1
2
REMARKS:
1
It is recommended that a 4 wheel alignment is carried out.
2
No top mounting bushes supplied, re-use OE bushes.
Page 41
OME INT NO.28.1 DECEMBER 2012
MITSUBISHI
PAJERO / MONTERO 1991 - 1999
SWB & LWB REAR LEAF SPRING MODELS
FRONT
PART NUMBER
303010
303011
60040
N18
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 45 - 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
QTY
1
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
CS022R
60057
*N56 / N54
QTY
2
UNIT
PRICE $
2
2
CS023R
*60036 / 60057
N56
OMESB38
OMEGS16
2
2
2
2
2
1
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303010 suits
it 88 To
T 90 V6 Models
M d l and
d allll Models
M d l 91 To
T 94 - llength
th 1278
1278mm
303011 suits all Models 95 To 00 - length 1308mm.
2
OMESB38 must be used to fit OME springs.
PAJERO / MONTERO 1991 - 1999
ALL LWB REAR COIL SPRING MODELS
FRONT
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: To 20mm
303010
303011
60040
N18
QTY
1
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2910
60041
N64
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2938
60041
N64
UNIT
PRICE $
2
1
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303010 suits all Models 91 To 94 with 1278mm length.
303011 suits all Models 95 To 00 with 1308mm length
Page 42
OME INT NO.28.1 DECEMBER 2012
MITSUBISHI
PAJERO / MONTERO 1991 - 1999
ALL SWB REAR COIL SPRING MODELS
FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
60040
N18
REAR
Estimated Lift: 20mm
QTY
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
2911
60041
N64
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
UNIT
PRICE $
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
PAJERO / MONTERO TO 1991
REAR LEAF SPRING MODELS
(Hyundai Galloper)
FRONT
4 CYLINDER ENGINE
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
303009
60051
REAR
Estimated Lift: 45 - 50mm
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KIT
CS022R
60057
*N56 / N54
QTY
2
UNIT
PRICE $
2
2
CS023R
*60036 / 60057
N56
OMESB8
OMEU54
OMEGS16
2
2
2
2
3
2
4
1
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303009 suits 82 To 90 4 cylinder Models - length 1278mm.
2
OMESB8 must be used with CS022R and CS023R springs.
3
OMEU54 only required on SWB Models.
Page 43
OME INT NO.28.1 DECEMBER 2012
MITSUBISHI
PAJERO CHALLENGER 1989 - 1991
REAR COIL SPRING MODELS (Hyundai Galloper) (USA - MONTERO SPORT)
FRONT
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
REAR
Estimated Lift: 15mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
303010
60051
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
2910
60056
1
2
UNIT
PRICE $
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303010 suits 88 To 90 V6 Models.
TRITON / L200 ML & MN 2006 ON ALL MODELS
FRONT
Estimated Lift: 10mm
PART NUMBER
QTY
SPRING: NO BAR
STRUT - SPORT
STRUT
2605
90008
N186S
1
SPRING: BAR ONLY
STRUT - SPORT
STRUT
2606
90008
N186S
SPRING: BAR & WINCH
STRUT - SPORT
STRUT
3027
90008
N186S
REAR
Estimated Lift: 20mm
4
4
2
4
2
2
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
CS054R
60036
N59
SPRING: CONSTANT 500 KGS
NITROCHARGER SPORT
NITROCHARGER
CS022R
60036
N59
SPRING: CONSTANT 800 KGS
NITROCHARGER SPORT
NITROCHARGER
CS023R 1
60036
N59
OMEU71
OMEU76
OMESB38
OMEGS16
D32XL
UCB10
1
1
QTY
2
2
2
2
3
UNIT
PRICE $
2
3
2
2
5
6
2
1
7
4
2
1
4
2
1
4
2
OMEGS16 is a mandatory fitment to
prevent springs from inverting.
2
OMESB38 is a mandatory fitment to OME
springs only. Include tray weight in
constant load calculation. Springs can
only be installed with OME Bush Kit.
3
Reverse centre bolt to allow fitment.
No top mounting bushes supplied, re-use
OE bushes.
4
2
2
1
REMARKS:
2
2
2611
90008
N186S
UNIT
PRICE $
1
2
1
QTY
2606
90008
N186S
ALL MODELS
PART NUMBER
PART NUMBER
2605
90008
N186S
1
CS053R
60036
*N59 / N54
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT
UNIT
PRICE $
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
V6 PETROL ENGINE
DIESEL ENGINE
5
OMEU71 is to be used with CS053R,
CS054R, CS022R.
6
OMEU76 is to be used with CS023R.
D32XL suitable for CS053R, CS054R and
CS022R.
7
4
4
2
1
2
2
Page 44
OME INT NO.28.1 DECEMBER 2012
MITSUBISHI
TRITON / L200 MK 10/1996 - 2006 ALL MODELS
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: To 40mm
303006
60040
*N18 / N57G
QTY
1
UNIT
PRICE $ REMARKS:
1
1 Raise or lower front end clearance and
2
trim vehicle by adjusting front torsion
bars. Important: A minimum of 60mm
of droop must be maintained. Torsion
bar 303006 suits 1993 On Models with
39 splines.
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS022R
60050
N30E
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
ANTI-INVERSION KIT
GREASABLE SHACKLE KIT
CS023R
60050
N30E
OMEU57
OMESB38
FK30
OMEGS16
2
QTY
3
UNIT
PRICE $
2 OMESB38 is a mandatory fitment to
2
OME springs only. Include tray weight
in constant load calculation. Springs
can only be installed with OME bush
kits.
2
2
3
2
2
2
3
3 FK30 Anti-Inversion Kit is a mandatory
fitment, with or without Greasable
Shackle Kit.
4
2
1
1
TRITON / L200 TO 1996 ALL MODELS
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
REAR
Estimated Lift: To 40mm
303006
60051
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS022R
60058
N30E
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
ANTI-INVERSION KIT
GREASABLE SHACKLE KIT
CS023R
60058
N30
OMEU57
OMESB38
FK30
OMEGS16
2
QTY
3
UNIT
PRICE $
2
2
2
3
2
2
2
3
4
2
1
1
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
Torsion Bar 303006 suits 1993 On MJ Models with 39 splines.
2
OMESB38 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs canonly be
installed with OME Bush Kits.
4
3
FK30 Anti-Inversion kit is a mandatory fitment, with or without Greasable Shackle Kit.
Page 45
OME INT NO.28.1 DECEMBER 2012
MITSUBISHI
CHALLENGER / MONTERO SPORT KH
2010 ON MODELS
FRONT
Estimated Lift: 20mm
V6 PETROL ENGINE
PART NUMBER
QTY
SPRING: NO BAR
STRUT - SPORT
STRUT
2611
90008
N186S
1
SPRING: BAR ONLY
STRUT - SPORT
STRUT
2605
90008
N186S
SPRING: BAR & WINCH
STRUT - SPORT
STRUT
2606
90008
N186S
REAR
Estimated Lift: 35mm
1
2
1
2
QTY
2605
90008
N186S
1
3027
90008
N186S
1
1
PART NUMBER
2606
90008
N186S
1
2
1
UNIT
PRICE $
2
1
1
2
1
1
2
ALL MODELS
PART NUMBER
QTY
2910
60076
N116
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2938
*60075 / 60076
N116
1
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
2838
60075
N116
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
UNIT
PRICE $
DIESEL ENGINE
UNIT
PRICE $
2
2
2
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
CHALLENGER / MONTERO SPORT
2000 - 2008 LWB (COIL REAR MODELS)
FRONT
V6 PETROL ENGINE
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 40mm
303011
60040
N57G
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2911
60059
N116
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2910
60059
N116
1
UNIT
PRICE $
2
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
Page 46
OME INT NO.28.1 DECEMBER 2012
MITSUBISHI
CHALLENGER V6 / MONTERO SPORT WAGON PA
1998 - 2000 (REAR LEAF SPRING MODELS)
FRONT
V6 PETROL ENGINE
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 25mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT
303011
60040
N57G
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
CS040R
60057
*N56 / N54
2
QTY
3
UNIT
PRICE $
2
2
CS041R 2
*60036 / 60057
N56
OMESB83
OMEGS16
D7XL
UCB5
3
2
2
3
2
2
1
2
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle byy adjusting
j
g front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303011 suits all Models with bar - length 1308mm.
2
OMEGS16 is a mandatory fitment to prevent springs from inverting.
3
OMESB38 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only be
installed with OME Bush Kit. The Centre Bolt on CS040R must be reversed prior to fitment.
Page 47
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL Y62 2010 ON (NON HBMC MODELS)
FRONT
Estimated Lift: 40mm
SPRING: No Bar
STRUT - SPORT
SPRING: Bar
STRUT - SPORT
SPRING: Bar / Winch
STRUT - SPORT
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
V8 PETROL ENGINE
PART NUMBER
QTY
2977
90014
2
2978
*90015 / 90014
2
2979
90015
2
UNIT
PRICE $
1
2
1
2
1
2
ALL MODELS
PART NUMBER
2986
60084
QTY
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
2987
*60085 / 60084
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
2988
60085
1
1
UNIT
PRICE $
1
2
1
2
1
2
REMARKS:
1
It is recommended that a 4 wheel alignment is carried out.
2
No top mounting bushes supplied, re-use OE bushes.
Page 48
OME INT NO.28.1 DECEMBER 2012
OFF ROAD USE ONLY - NISSAN
PATROL Y60 & Y61 LWB
FRONT
PART
NUMBER
QTY
2412
3033
2413
3036
2414
1
1
1
1
1
250 lbf/in
60013L
2
Suits 75mm &100mm coils
1
GQ pre 8/1989 models
GQ 8/1989 on models
GU pre 01/2000 models
GU 01/2000 on models
UNIT
PRICE $
COMMENTS
COILS
75mm LIFT - SPRING TO 50KG
75mm LIFT - SPRING 51 TO 110KG
100mm LIFT - SPRING TO 50KG
100mm LIFT - SPRING 51 TO 110KG
125mm LIFT - SPRING TO 50KG
320 lbf/in
250 lbf/in
320 lbf/in
250 lbf/in
SHOCKS
NITROCHARGER SPORT
STEERING DAMPER
STABILISER
OMESD34
OMESD36
OMESD11
OMESD01
COMPONENTS
ADJUSTABLE PANHARD ROD
ADJUSTABLE PANHARD ROD WITH SPH
BEARING
SPHERICAL BEARING TO SUIT PANHARD
COIL SPRING TRIM PACKER
COIL SPRING TRIM PACKER
GEARBOX PACKER KIT
REAR
PANR004
PANR028X
PAN3097A
OME3098
OMEGQPF05
OMEGQPF10
GQGK01
PART
NUMBER
Pre 01/2000 models, RHD only
01/2000 on models, RHD only
Pre 01/2000 models, LHD only
Suits OE and Adjustable 01/00 on
5mm
1
1
1
10mm
GQ only
1
QTY
Q
UNIT
PRICE $
COMMENTS
COILS
75mm LIFT - MEDIUM
75mm LIFT - CONSTANT 200KG
75mm LIFT - CONSTANT 400KG
100mm LIFT - MEDIUM
100mm LIFT - CONSTANT 200KG
100mm LIFT - CONSTANT 400KG
125mm LIFT - MEDIUM
2415
3034
3035
290 lbf/in
2417
1
1
1
1
1
1
1
60015L
2
PANR005
1
Pre 01/2000 models, RHD & LHD
ADJUSTABLE PANHARD ROD WITH SPH
BEARING
PANR029X
1
01/2000 on models, RHD & LHD
SPHERICAL BEARING TO SUIT PANHARD
HEAVY DUTY LOWER TRAILING ARMS
ADJUSTABLE UPPER TRAILING ARMS
TRIM PACKER
TRIM PACKER
OME3098
LTA3044
UTAA106
OMEGQPR05
OMEGQPR10
1
1
1
Suits OE and Adjustable 01/00 on
Standard Length
2416
3037
3038
300 lbf/in
470 lbf/in, coil tower reinforcing recommended
290 lbf/in
300 lbf/in
470 lbf/in, coil tower reinforcing recommended
290 lbf/in
SHOCKS
NITROCHARGER SPORT
COMPONENTS
ADJUSTABLE PANHARD ROD
50mm on car adjustable
5mm
10mm
Notification: Modifications for off - road use only
The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public
road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the
customer.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and will depend on vehicle weights.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing.
p "racing
g application
pp
pp
p
The fitter must also note on the customer's receipt
no warrantyy applies".
This will prevent
anyy future
misunderstanding.
Page 49
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL GU Y61 ALL LWB MODELS
FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 50 KGS: 20mm LIFT
NITROCHARGER SPORT
NITROCHARGER
CASTER KIT
STEERING DAMPER
TRIM PACKER
OIL PAN PACKER KIT
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
PETROL 4.5, 4.8 &
DIESEL 4.2
PART NUMBER
QTY
2970
61012
*N19 / N19C
1
2971
60013
N19
1
2972
61012
*N19 / N19C
OMECA77B
OMESD11
OMESD01
OMEGQPF05
OMEGQPF10
FK25
1
2
2
2
1
5
1
1
2
PART NUMBER
QTY
2973
61012
*N19 / N19C
1
2970
60013
N19
1
2974
61012
*N19 / N19C
OMECA77B
OMESD11
OMESD01
OMEGQPF05
OMEGQPF10
FK25
2
1
UNIT
PRICE $
2
2
1
2
2
1
5
1
1
2
1
ALL MODELS
PART NUMBER
2980
61014
*N29 / N29C
QTY
4
UNIT
PRICE $
1
2
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2981
60015
N29
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
2985
60015
N29
SPRING: MEDIUM 30mm LIFT
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
4
2982
61014
*N29 / N29C
Do not use Packers
FK18
3
FK24
SWAY BAR EXT KIT
UNIT
PRICE $
DIESEL 2.8 & 3.0 TURBO
4
1
2
6
1
2
1
2
1
REMARKS:
1
Coil trim packers may be required to trim vehicles.
Packers must be installed to the bottom of front coils.
2
OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required. FK25 may be required for some European Models when Caster Kit is fitted.
3
FK18: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage
to sway bar when suspension is at full extension. FK24 suits Models with detachable sway bar.
4
Special Note: Due to limited clearance between tailshaft and chassis cross member, OME does not recommend
fitment of gear box packers.
5
OMESD11 steering damper fits all Models To 1/2000. OMESD01 fits 2/2000 On Models.
To verify correct fitment for individual vehicles compare OE mounts with Steering Stabilisers Specifications
on Page 133.
6
It is highly recommended to reinforce coil towers if fitting heavy rear springs.
Page 50
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL GU Y61 SWB MODELS
FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT
OIL PAN PACKER KIT
REAR
Estimated Lift: 40mm
2.8 & 3.0 TURBO DIESEL
PART NUMBER
QTY
2974E
61012
*N19 / N19C
1
2
2972E
60013
N19
OMEGQPF05
OMEGQPF10
OMESD01
OMESD11
OMECA77B
FK25
1
2
1
1
2
1
3
ALL MODELS
PART NUMBER
QTY
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
2GQ02A
61014
*N29 / N29C
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2GQ02B
61014
*N29 / N29C
1
2GQ02D
60015
N29
FK18
FK24
GQGK02
OMEGQPR05
OMEGQPR10
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SWAY BAR EXT KIT
GEAR BOX PACKER KIT
TRIM PACKER
UNIT
PRICE $
UNIT
PRICE $
2
2
2
4
1
5
REMARKS:
1
OMESD01 fits 2/2000 On Models.
OMESD11 fits all Models To 1/2000.
2
OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.
3
FK25 x 2 Oil Pan Kits must be installed when OMECA77B Caster Kit or GQGK02 Gear Box Packer Kit are fitted.
4
FK18: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage
to sway bar when suspension is at full extension. FK24 suits Models with detachable sway bar.
5
GQGK02 Gear Box Packer Kit is designed to space down the gear box cross member from the chassis to
reduce tail shaft flange angle thereby reducing driveline vibration. In some cases 2 kits may be required.
Page 51
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL GU Y61 ALL COIL CAB CHASSIS MODELS
FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
TRIM PACKER
REAR
Estimated Lift: 50mm
ALL 4.2 DIESEL ENGINES
PART NUMBER
QTY
2970
61012
*N19 / N19C
1
2971
60013
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10
1
UNIT
PRICE $
2
PART NUMBER
QTY
2973
61012
*N19 / N19C
1
2970
60013
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10
2
1
3.0 TURBO DIESEL ENGINE
1
1
2
UNIT
PRICE $
2
1
2
1
1
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2983
61014
N29
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2984
60015
N29
1
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
TRIM PACKER
2985
60015
N29
3
FK18
Do not use Packers
1
UNIT
PRICE $
2
2
2
1
REMARKS:
1
OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.
2
Coil trim packers may be required to trim vehicle to a maximum of 15mm.
Packers must be installed to the bottom on front coil.
3
FK18 Rear Sway Bar Extension Bracket is mandatory fitment to prevent damage
to sway bar when suspension is at full extension.
Page 52
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL GU Y61 CAB CHASSIS
COIL: FRONT / LEAF: REAR
FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
TRIM PACKER
REAR
Estimated Lift: 50mm
ALL 4.2 DIESEL ENGINES
PART NUMBER
QTY
2970
60055
*N19 / N19C
1
1
2
2
1
1
1
PART NUMBER
QTY
2973
60055
*N19 / N19C
1
2970
60055
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10
1
UNIT
PRICE $
2
2
2
1
1
1
ALL MODELS
PART NUMBER
CS016RA/B
60054
N25
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
ANTI INVERSION KIT
CS016RA/B 3
60054
N25
OMESB64
FK08
OMEGS1
OMEGP2
OMEU64
FK41
D15XL
UCB11
U BOLT
BUMP STOP EXTENSION KIT
EXTRA LEAF
CENTRE BOLT
2
2971
60055
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
GREASABLE SHACKLE KITS
UNIT
PRICE $
3.0 TURBO DIESEL ENGINE
3
4
QTY
5
UNIT
PRICE $
1+1
2
4
5
1+1
2
3
2
1
1
5
4
1
2
2
REMARKS:
1
Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the bottom on front coils.
2
OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.
3
FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted.
Refer OME Technical & Fitting Manual.
4
For improved ride quality on vehicles carrying medium loads remove the 3rd leaf.
Include tray weight in constant load calculation.
5
It is recommended to fit FK41 Bump Stop Extension Kit especially in high articulation situations.
Page 53
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL GQ Y60 ALL SWB & LWB MODELS
FRONT
Estimated Lift: 40 - 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 50 KGS: 30mm LIFT
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
Estimated Lift: 30 - 50mm
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
4.2 ENGINE
PART NUMBER
QTY
2975
61012
*N21 / N23F
1
2976
60013
N21
1
2974
61012
*N21 / N23F
OMEGQPF05
OMEGQPF10
OMESD36
OMESD34
OMECA77B
1
2.8 & 3.0 ENGINES
UNIT
PRICE $
2
2
1
1
2
1
LWB MODEL
PART NUMBER
QTY
2GQ02C
61014
N22F
1
1
2GQ02J
60015
N29
1
UNIT
PRICE $
2
2
LPG CONVERSION
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
GEAR BOX PACKER KIT
4
2GQ02LP
61014
N29
Do not use Packers
3
GQGK01
2974
61012
*N21 / N23F
1
2972
60013
N21
1
UNIT
PRICE $
2
2
1
1
SWB MODEL
2
2GQ02AM
61014
*N29 / N22F
QTY
NOT APPLICABLE
OMEGQPF05
1
OMEGQPF10
OMESD36
5
OMESD34
2
OMECA77B
2
5
PART NUMBER
1
2
1
PART NUMBER
QTY
2GQ02CM
61014
N22F
1
2GQ02C
61014
*N29 / N22F
2GQ02G
60015
N29
UNIT
PRICE $
2
1
2
1
2
LPG CONVERSION
4
2GQ02LP
61014
N29
Do not use Packers
3
GQGK01
1
2
1
REMARKS:
1
Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the top on rear coils and to the bottom on front coils.
2
OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.
3
Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.
4
LPG conversion equated to 100-125 litre rear mounted gas tank and a 70-75 litre mid mounted auxiliary petrol
tank.
5
OMESD36 fits 8/89 On Models.
OMESD34 fits pre 8/89 Models.
Page 54
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS
FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT
4.2 ENGINES
PART NUMBER
QTY
2975
61012
N23F
1
Estimated Lift: 40 - 50mm
SPRING: MEDIUM LOAD
40mm LIFT
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
GEAR BOX PACKER KIT
2
2976
60013
N21
OMEGQPF05
OMEGQPF10
OMESD36
OMECA77B
REAR
UNIT
PRICE $
1
2
1
2
1
1
ALL MODELS
PART NUMBER
2GQ02C
QTY
3
61014
N22F
2GQ02J
60015
N29
OMEGQPR05
OMEGQPR10
GQGK01
UNIT
PRICE $
1
2
3
1
2
1
4
1
REMARKS:
1
Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the top on rear coils and to the bottom on front coils.
2
OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.
3
Include tray weight in constant load calculation.
4
Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.
Page 55
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS
FRONT
Estimated Lift: 30mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KITS
STEERING DAMPER
CENTRE BOLT SPACER KIT
REAR
Estimated Lift: 45mm
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KITS
U BOLTS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
4.2 ENGINE
PART NUMBER
CS003F
60068
N28
QTY
1
UNIT
PRICE $ REMARKS:
1 CBS02 x 2 centre bolt spacers required
2
for front spring fitment.
2
CS004F
60068
N28
OMESB1
OMEGS2
OMEGP2
OMESD22
CBS02
1
2 FK08 Anti Inversion Kit is mandatory
fitment if greasable shackles are not
fitted. Refer OME Technical & Fitting
Manual.
2
2
2
1
3 Include tray weight in constant load
1
4 Remove 3rd leaf for vehicles requiring
calculation.
400kg constant load springs.
1
2
1
ALL MODELS
PART NUMBER
CS016RA/B
60054
N25
2
CS016RA/B
60054
N25
OMESB64
OMEGS1
OMEGP2
OMEU58B
FK08
D15XL
UCB11
3
QTY
4
UNIT
PRICE $
1+1
2
2 3
1+1
2
2
1
2
4
1
2
2
Page 56
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL MQ 260 LWB SPANISH BUILT ALL 2.8TD MODELS
FRONT
Estimated Lift: 30 - 40mm
PETROL & DIESEL ENGINES
PART NUMBER
SPRING: TO 50 KGS
NITROCHARGER
CS016F
*N19 / N19C
SPRING: 51-100 KGS
NITROCHARGER
CS016F
N19
OMESB3
OMESB29
OMEU56
OMEU57
SPRING BUSH KIT
U BOLTS
REAR
Estimated Lift: 50mm
QTY
1
from top of spring.
2 Front U Bolt:
OMEU56 fits to right hand side.
OMEU57 fits to left hand side.
2
2
2
ALL MODELS
QTY
SPRING: MEDIUM LOAD
NITROCHARGER
CS011R
N89
SPRING: CONSTANT 200 KGS
NITROCHARGER
CS012R
*N42 / N89
OMESB2
OMESB29
OMEU58
2
2
2
2
U BOLTS
1 To improve ride quality remove 3rd leaf
2
2
2
2
PART NUMBER
SPRING BUSH KIT
UNIT
REMARKS:
PRICE $
UNIT
PRICE $
2
4
Page 57
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATROL MQ M60 ALL MODELS
FRONT
PETROL & DIESEL ENGINES
Estimated Lift: 30 - 40mm
SPRING: TO 50 KGS
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT
REAR
PART NUMBER
QTY
CS010FA / B 1
EARLY *N47/N96
LATE
N49
1+1
CS011FA / B 1
EARLY *N47/N96
LATE
N49
OMESB28
2
OMESB29
OMESB31
2
OMESB29
OMEU56
4
OMEU57
OMESD22
5
D11XL
UCB5
1+1
UNIT
PRICE $
2
2
2
2
1
2
2
ALL MODELS
Estimated Lift: 50mm
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER
CS011R
N97
SPRING: CONSTANT 200 KGS
NITROCHARGER
CS012R
N48
OMESB2
OMESB29
OMEU58
D12XL
UCB1
2
2
2
2
SPRING BUSH KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT
3
UNIT
PRICE $
2
4
2
2
REMARKS:
1
Models with P40 4 litre engine require CS011FA / B springs.
Individual vehicles fitted with A / B fitment may experience a pronounced trimming problem to right hand side.
In these cases fitment of an XL leaf to the right hand side will correct problem.
2
Front Spring Bushes:
Early model (round headlight) require
OMESB28 and OMESB29.
Late model (square headlight) require
OMESB31 and OMESB29.
3
OME Bush Kits must be used to enable springs to be fitted.
4
Front U Bolt:
OMEU56 fits to right hand side
OMEU57 fits to left hand side
5
D11XL suitable for CS010FA / B.
Page 58
OME INT NO.28.1 DECEMBER 2012
NISSAN
NAVARA D40 2005 ON ALL MODELS (USA - NISSAN FRONTIER)
FRONT
Estimated Lift: 20 - 30mm
DIESEL & V6 PETROL
PART NUMBER
QTY
SPRINGS: TO 40 KGS
STRUT - SPORT
STRUT
2607
90003
N183S
1
SPRINGS: 41 TO 80 KGS
STRUT - SPORT
STRUT
2608
90003
N183S
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT
1
V6 TURBO DIESEL
UNIT
PRICE $
2
2
ALL MODELS
QTY
2608
90003
N183S
1
1
2631
90003
N183S
1
1
PART NUMBER
UNIT
PRICE $
2
1
2
REMARKS:
OE plastic stone shield must be
UNIT
refitted. No top mounting bushes
PRICE $
supplied, re-use OE bushes.
1
PART NUMBER
CS150R
60017
N185
OMESB99
OMESB100
QTY
3
2
2
CS151R
*60110 / 60017
N185
OMESB99
OMESB100
OMEGS15
OMEU53A
D31XL
UCB19
2
2
3
2
2
2
2
2
1
4
2
2
4
2
Use:
OMESB99 with OE Shackles.
OMESB100 when installing OMEGS15.
3
Include tray weight in constant load
calculation.
4
OE U bolt plate bolt holes may need to
be enlarged when fitting OME U bolts.
NAVARA D22 10/2002 ON ALL MODELS
NP300 2008 ON ALL MODELS
FRONT
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT
PART NUMBER
303007
60034
N151
QTY
UNIT
PRICE $ REMARKS:
1
1
1 Raise or lower front end clearance and trim
2
2
vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop
must be maintained.
ALL MODELS
PART NUMBER
CS032R
60035
N56
CS031R
60035
N59
OMESB91
OMESB105
OMEU63
OMEGS21
D18XL
UCB14
QTY
4
2
2
3
2
2
6
6
5
2
4
1
2
2
UNIT
PRICE $
2 It may be necessary to slightly increase the
clearance in the front wishbone to allow
shock absorber to fit. Do not modify shock
absorber.
3 Include tray weight in constant load
calculation. For constant 400kg loads, add
D18XL to CS031R.
4 CS032R has a 25mm lower cambered 2nd
stage for improved ride quality, however
under heavy load this will cause the ride
height to be 25mm lower.
5 FK01 U Bolt Thread Spacer Kit requied on
all cab chassis Models.
6 OMESB91 suits OE Shackle.
OMESB105 suits OME Greasable Shackle
OMEGS21.
Page 59
OME INT NO.28.1 DECEMBER 2012
NISSAN
NAVARA D21 & D22 TO 8/2002 ALL MODELS
FRONT
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
REAR
Estimated Lift: 30mm
QTY
UNIT
PRICE $ REMARKS:
1
1
1
2
2
3
1
PART NUMBER
303007
303008
60021
N58
OMESD35
Important: A minimum of 60mm of
droop must be maintained.
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS030R
60035
N56
2
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT
CS031R
60035
N59
OMESB81
OMEU63
D18XL
UCB14
UNIT
PRICE $
2
It may be necessary to slightly increase
the clearance in the front wishbone to
allow shock absorber to fit. Do not
modify shock absorber.
3
On later Models steering damper was
not fitted. Check vehicle to confirm it
does have an original steering damper
fitted.
4
For constant 400kg loads, add D18XL
to CS031R. Include tray weight in
constant load calculation.
2
4
Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars. 303007 suits D22 & 303008 suits
D21 Models.
2
2
2
4
2
2
PATHFINDER R51 2005 ON (NOT USA MANUFACTURED MODEL)
FRONT
Estimated Lift: 30mm
DIESEL & V6 PETROL
PART NUMBER
QTY
SPRING: TO 40 KGS
STRUT - SPORT
STRUT
2607
90003
N183S
1
SPRING: 41 TO 100 KGS
STRUT - SPORT
STRUT
2608
90003
N183S
REAR
Estimated Lift: 30mm
1
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2609
60016
N184
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2610
60016
N184
1
2
PART NUMBER
QTY
2608
90003
N183S
1
2631
90003
N183S
1
1
V6 TURBO DIESEL
1
UNIT
PRICE $
2
1
2
REMARKS:
UNIT
PRICE $
1 OE plastic stone shield must be refitted
and a 4 Wheel alignment must be
carried out after fitment of OME
suspension. No top mounting bushes
supplied, re-use OE bushes.
2
Page 60
OME INT NO.28.1 DECEMBER 2012
NISSAN
PATHFINDER R50 1996 - 2005 V6 MODELS
FRONT
Estimated Lift: 15mm
SPRING: NO ACCESSORIES
SPRING: TO 50 KGS
SPRING: 51 TO 100 KGS
STRUT
FITTING KIT
REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER
V6 MODEL
PART NUMBER
2921
2923
2928
N145S + N146S
SMP638
2
QTY
3
2
UNIT
PRICE $
1
1
1
1+1
1
ALL MODELS
PART NUMBER
QTY
2922
N61
N104
1
1
UNIT
PRICE $
2
REMARKS:
1
N61: Suit Models To 1/'99. N104: Suit Models from 2/'99 On.
2
Vehicles with ABS will require ABS Bracket Kit SMP638.
N146S Right Hand Side x 1
N145S Left Hand Side x 1
No top mounting bushes supplied, re-use OE bushes.
3
PATHFINDER TO LATE 1995 ALL MODELS
FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
60031
N26F
OMESD35
QTY
UNIT
PRICE $
1
2
2
1
ALL MODELS
PART NUMBER
QTY
2920
*60064 / 60032
*N42 / N89
1
UNIT
PRICE $
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
2
It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit.
Do not modify shock absorber.
Page 61
OME INT NO.28.1 DECEMBER 2012
NISSAN
TERRANO II R20 1996 - 2005
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
60031
*N65 / N26F
QTY
UNIT
PRICE $
1
2
2
ALL MODELS
PART NUMBER
QTY
2920
60058
N30
1
UNIT
PRICE $
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
2
It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit.
Do not modify shock absorber.
XTERRA 2005 ON MODELS
FRONT
Estimated Lift: 30mm
V6 PETROL ENGINE
PART NUMBER
QTY
SPRINGS: TO 40 KGS
STRUT - SPORT
STRUT
2607
90003
N183S
1
SPRINGS: 41 TO 80 KGS
STRUT - SPORT
STRUT
2608
90003
N183S
REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
U BOLTS
FITTING KIT
EXTRA LEAF
1
UNIT
PRICE $
2
1
1
2
ALL MODELS
PART NUMBER
CS061R
60017
N185
OMESB99
OMESB100
OMEGS15
OMEU72
FK42
D37XL
QTY
4
2
3
2
2
2
2
1
4
1
2
3
4
UNIT
PRICE $
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
2
OMESB99 suits factory shackles.
OMESB100 suits OMEGS15 Greasable Shackle Kit.
3
FK42 is a mandatory fitment to space sway bar link away from shock absorber.
4
CS061R with D37XL provides approximately 60mm lift over factory with no additional rear load.
CS061R with D37XL provides approximately 30mm lift over factory with constant 200kg additional rear load.
Page 62
OME INT NO.28.1 DECEMBER 2012
SSANGYONG
MUSSO, SPORT UTILITY & KORANDO 1995 - 2005
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
60031
N65
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER
QTY
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
2937
N118
1
2
UNIT
PRICE $
SUZUKI
GRAND VITARA 4 DOOR 08/2005 - 2008
FRONT
Estimated Lift: 20mm
SPRING: TO 35 KGS
STRUT
PETROL V6 (2.7)
DIESEL (1.9)
PART NUMBER
2623
N217S + N218S
REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER
QTY
1
PETROL 4 CYLINDER (2.0)
UNIT
PRICE $
2624
N217S + N218S
1
1+1
ALL MODELS
PART NUMBER
QTY
2625
OME036
1
2
PART NUMBER
QTY
1
UNIT
PRICE $
1
1+1
REMARKS:
UNIT
PRICE $
1 N217S Left Hand Side.
N218S Right Hand Side.
GRAND VITARA TO 2005
FRONT
Estimated Lift: 30mm
PETROL
4 & 6 CYLINDER ENGINE
PART NUMBER
QTY
SPRING: TO 35 KGS
STRUT
2959
N103S
SPRING: 36 TO 75 KGS
STRUT
2962
N103S
1
2
1
2
REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER
UNIT
PRICE $
QTY
2961
N105
1
2
Page 63
PART NUMBER
QTY
2962
N103S
1
2
1
2
2962
N103S
ALL MODELS
PART NUMBER
DIESEL ENGINE
1
UNIT
PRICE $
REMARKS:
UNIT
PRICE $
1 Coil packer OMESJR10 can be used to
increase ride height.
OME INT NO.28.1 DECEMBER 2012
SUZUKI
VITARA WAGON 1988 - 2005
FRONT
Estimated Lift: 25 - 30mm
V6 PETROL ENGINE
PART NUMBER
QTY
SPRING: TO 35 KGS
STRUT
2950
N103S
SPRING: 36 TO 75 KGS
STRUT
2959
N103S
1
2
1
2
REAR
Estimated Lift: 30mm
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
SPRING: LIGHT LOAD
NITROCHARGER
2954
N105
SPRING: MEDIUM LOAD
NITROCHARGER
2955
N105
1
2
1
2
UNIT
PRICE $
VITARA WAGON 1988 - 2005
FRONT
Estimated Lift: 30mm
4 CYLINDER PETROL ENGINE
PART NUMBER
QTY
SPRING: TO 35 KGS
STRUT
2960
N103S
SPRING 36 TO 75 KGS
SPRING:
STRUT
2953
N103S
1
2
1
2
REAR
Estimated Lift: 30mm
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
SPRING: LIGHT LOAD
NITROCHARGER
2954
N105
SPRING: MEDIUM LOAD
NITROCHARGER
2955
N105
1
2
1
2
UNIT
PRICE $
VITARA SWB TO 2005
FRONT
Estimated Lift: 30mm
SPRING: TO 35 KGS
STRUT
REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER
4 CYLINDER PETROL ENGINE
PART NUMBER
2951
N103S
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
2952
N32
QTY
2
1
2
Page 64
REMARKS:
UNIT
PRICE $
1 Front strut has 40mm longer travel than
original equipment.
2 Rear shock has 50mm longer travel
than original equipment.
OME INT NO.28.1 DECEMBER 2012
SUZUKI
XL7 WAGON 2001 - 2005
FRONT
PETROL ENGINE
Estimated Lift: 25mm
SPRING: NO ACCESSORIES
STRUT
BUMP STOP SPACER KIT
REAR
PART NUMBER
QTY
2956
N103S
FK28
1
2
1
1
DIESEL ENGINE
UNIT
PRICE $
PART NUMBER
QTY
2962
N103S
FK28
1
2
1
1
UNIT
PRICE $
ALL MODELS
Estimated Lift: 35mm
SPRING: MEDIUM LOAD
NITROCHARGER
PART NUMBER
QTY
2968
N105
1
2
UNIT
PRICE $
REMARKS:
1
FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts.
EQUATOR (US MARKET ONLY)
FRONT
DIESEL & V6 PETROL
Estimated Lift: 30mm
PART NUMBER
QTY
SPRINGS: TO 40 KGS
STRUT - SPORT
STRUT
2607
90003
N183S
1
SPRINGS: 41 TO 80 KGS
STRUT - SPORT
STRUT
2608
90003
N183S
REAR
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
GREASABLE SHACKLE KIT
U BOLTS
2
1
1
2
ALL MODELS
Estimated Lift: 40mm
SPRING BUSH KIT
1
UNIT
PRICE $
PART NUMBER
CS150R
60017
N185
OMESB99
OMESB100
CS151R
60017
N185
OMESB95
OMESB96
OMEGS15
OMEU53A
QTY
2
UNIT
PRICE $
2
2
2
2
2
2
2
2
2
2
1
4
3
REMARKS:
1
OE plastic stone shield must be refitted. No top mounting bushes supplied, re-use OE bushes.
2
CS150R: Use:
CS051R: Use:
3
OE U Bolt plate bolt holes may need to be enlarged when fitting OME U Bolts.
OMESB99 with OE Shackles.
OMESB95 with OE Shackles.
OMESB100 when installing OMEGS15.
OMESB96 when installing OMEGS15.
Page 65
OME INT NO.28.1 DECEMBER 2012
SUZUKI
SIERRA / SAMURAI ALL LEAF SPRING MODELS (SJ413)
STD TRACK : 1984 - 1988
SJ50 SWB
SJ51 LWB
WIDE TRACK : 1988 - 1996
SJ70 SWB (also fits MG410)
SJ71 LWB (also fits MG410WT)
Note: MG410 & MG10WT are Indian built LWB Models.
FRONT
Estimated Lift: 40mm
1.0 LITRE
PART NUMBER
SPRING: TO 25 KGS
NITROCHARGER
CS012FA / B
OME015
SPRING: 26 TO 75 KGS
NITROCHARGER
CS013FA / B
OME025
OMESB19
OMESB25
Required
FK06
TP05
OMESD30
D20XL
UCB7
SPRING BUSH
U BOLTS
FITTING KIT
TRIM PACKER
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT
REAR
Estimated Lift: 40mm
QTY
5
5
2
3
4
1
6
UNIT
PRICE $
PART NUMBER
CS012FA / B
OME025
1+1
2
1+1
2
1
4
1.3 LITRE
CS013FA / B
OME025
OMESB19
OMESB25
Required
FK06
TP05
OMESD30
D20XL
UCB7
1
2
2
QTY
5
5
1+1
2
1+1
2
1
2
3
4
1
4
6
UNIT
PRICE $
1
2
2
ALL MODELS
PART NUMBER
QTY
CS038R
OME013
N43
2
SPRING: MEDIUM LOAD
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
TRIM PACKER
EXTRA LEAF
CENTRE BOLT
CS039R
OME013
N43
OMESB19
OMESB25
Required
TP05
D21XL
UCB7
2
UNIT
PRICE $
2
2
2
2
1
2
3
4
2
2
REMARKS:
1
OMESB19 Bush Kit fits all Models except LJ50. OMESB25 Bush Kit only fits Model LJ50.
2
OME013 fits all Models except LJ80 and LJ80 II. N43 fits all LJ80 and LJ80 II Models.
3
88 To '96 1300cc Wide Track Models:
Front:
D/S OMEU61 x 1, OMEU61B x 1
Rear:
OMEU60 x 4
P/S OMEU60 x 2
84 To '88 1300cc STD Track Models:
Front:
D/S OMEU61 x 1, OMEU61B x 1
Rear:
OMEU62 x 4
P/S OMEU62 x 2
81 To '87 1000cc Models:
Front:
D/S OMEU61 x 1, OMEU61B x 1
Rear:
OMEU60 x 4
P/S OMEU60 x 2
4
FK06 kit required for Model with OE stabiliser bar. Refer OME Technical & Fitting Manual.
5
IMPORTANT: Sierras used in extreme heavy off road use eg. station mustering
must have CS013FA + B installed.
6
D20XL is suitable for C012FA / B.
Page 66
OME INT NO.28.1 DECEMBER 2012
SUZUKI
SANTANA SAMURAI TO 2004 SWB & LWB MODELS
FRONT
Estimated Lift:30 - 40mm
1.3 LITRE PETROL
PART NUMBER
SPRING: TO 25 KGS - 40mm
NITROCHARGER
CS012FA / B
OME034
SPRING: 26 TO 75 KGS
XL LEAF
NITROCHARGER
SPRING BUSH
CS013FA / B
D20XL
OME034
OMESB19
OE
U BOLTS
STEERING DAMPER
TRIM PACKER
REAR
Estimated Lift: 40mm
2
1
2
UNIT
PRICE $
PART NUMBER
CS013FA / B
OME034
1+1
2
1+1
2
2
2
CS013FA / B
D20XL
OME034
OMESB19
OE
PART NUMBER
SPRING: CONSTANT 100KGS
XL LEAF
NITROCHARGER
SPRING BUSH KIT
CS039R
OME035
OMESB19
OE
OMEU60
TP05
2
2
2
1
UNIT
PRICE $
1+1
2
1+1
2
2
2
4
4
1
LWB MODEL
UNIT
PRICE $
PART NUMBER
CS039R
OME035
2
2
2
CS039R
D21XL
OME035
OMESB19
OE
OMEU60
TP05
2
2
2
2
OMEU60 OMEU61
LHS
RHS
3
OMESD30
TP05
1
QTY
QTY
2
2+2
SWB MODEL
CS038R
OME035
TRIM PACKER
2
OMEU60 OMEU61
LHS
RHS
OMESD30
3
TP05
SPRING: MEDIUM LOAD
NITROCHARGER
U BOLTS
QTY
1.9 LITRE DIESEL
4
QTY
2
2
4
2
UNIT
PRICE $
2
2
2
2
2
2
4
REMARKS:
1
Fitment of XL Leaf D20XL is recommended for weight in excess of 26kg on diesel Model & 75kg on petrol Model.
2
Front: LHS: OMEU60 x 2, RHS: OMEU61B x 2 required when fitting CS013FA/B
Rear: OMEU60 x 4 required when fitting CS039R
3
OMESD30 can be fitted to Models which have an OE steering damper.
4
Fitment of XL leaf D21XL is recommended for LWB Models with constant 100kg rear weight or OE hard top.
JIMNY SN413
FRONT
Estimated Lift: 40mm
4 CYLINDER PETROL ENGINE
PART NUMBER
QTY
SPRING: TO 35 KGS
NITROCHARGER
2963
OME028
SPRING: 36 TO 85 KGS
NITROCHARGER
2965
OME028
1
2
1
2
REAR
Estimated Lift: 40mm
SPRING:
NITROCHARGER
TRIM PACKER
UNIT
PRICE $
2966
2967
OME029
OMESJR10
QTY
1
1
2
Page 67
PART NUMBER
QTY
2965
OME028
1
2
1
2
2969
OME028
ALL MODELS
PART NUMBER
DIESEL ENGINE
UNIT
PRICE $
REMARKS:
UNIT
PRICE $
1
2966 suits right hand drive Models
with a 20mm higher right hand side
coil.
2967 suits left hand drive Models
with equal height coils.
If uncertain, compare original coil
heights.
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 200 SERIES WAGON*
FRONT
Estimated Lift: As Below
SPRING: NO WEIGHT: 25mm
LIFT
STRUT - SPORT
STRUT
SPRING: 100 KGS: 25mm LIFT
STRUT - SPORT
STRUT
SPRING: N0 WEIGHT: 50mm
LIFT
STRUT - SPORT
STRUT
SPRING: 100 KGS: 50mm LIFT
STRUT - SPORT
STRUT
COIL PACKER
REAR
Estimated Lift: As Below
SPRING: MEDIUM LOAD: LESS
20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD: NO
LIFT
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD: 20mm
LIFT
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS:
20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS:
20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 600 KGS:
20mm
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STONE GUARD KIT
ALL V8 DIESEL ENGINES
PART NUMBER
QTY
2700
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
90017
N208S
2701
91005
N208S
2702
90017
N208S
2703
91005
N208S
OME95PF5
UNIT
PRICE $
V8 PETROL ENGINE
PART NUMBER
QTY
2704
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
90017
N208S
2705
91005
N208S
2700
90017
N208S
2701
91005
N208S
OME95PF5
3
ALL MODELS
PART NUMBER
QTY
2720
1
61029
N209
2
2721
1
61029
N209
2
2722
1
61029
N209
2
2723
1
61030
N210
2
2724
1
61030
N210
2
2725
1
2
4
3
SELECTION HINTS:
*For Fitment to Models with Toyota's
KDSS (Kinetic Dynamic Suspension
System) fitted, please refer to OME's
Fitting Hints & Tips (OME Bulletin 70
LC200 KDSS Fitting
g Hints).
)
UNIT
PRICE $
REMARKS:
1 OME Coils and strut can only be
installed together due to different
winding of the lower coil end to suit
the OME coil seat. They are not
compatible with the OE Coil Seat.
Due to the nature of the KDSS,
Models fitted with KDSS may
experience a characteristic 10mm to
15mm lean to the front right hand
side.
2
No top mounting bushes supplied, reuse OE bushes.
3
To maintain ride height when front
accessory weight exceeds 100kgs,
OME95PF5 coil packer should be
installed, each OME95PF5 will
increase ride height by 10mm.
4
61030
N210
OME80PR05
OME80PR10
OME661
UNIT
PRICE $
OME661 Lower Shock Stone Guards
are recommended fitment for
protection against stone damage.
1
Page 68
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 100 SERIES
INDEPENDENT FRONT SUSPENSION
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 75 KGS
NITROCHARGER SPORT
NITROCHARGER
303001
1
303002
*60001 / 60000
*N199 / N133 / N100
FITTING KIT
FK27
REAR
Estimated Lift: 10mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
5
1
2860
60002
*N200 / N101
1
2
2864
60003
N200
STONE GUARD KIT
2
QTY
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
1
PART NUMBER
2863
*60003 / 60002
*N200 / N101
NITROCHARGER SPORT
NITROCHARGER
UNIT
PRICE $
ALL MODELS 10/2000 ON
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
QTY
2866
2862
60002
*N200 / N101
OME80PR05
OME80PR10
OME661
1
2
1
2
4
1
2
2
3
1
UNIT
PRICE $
10/98 TO 2000 V8 MODELS
PART NUMBER
QTY
2865
60002
*N200 / N101
1
UNIT
PRICE $
2
2866
*60003 / 60002
*N200 / N101
1
-
-
2
-
OME80PR05
OME80PR10
OME661
2
3
1
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock
absorbers. 303001 suits V8 Models. 303002 suits Turbo Diesel Models.
NB: In some Middle Eastern Countries, 6 Cylinder Petrol LandCruiser 100 Series (IFS) use the
longer turbo diesel torsion bars.
2
Packers must be installed on top of coils.
3
SPORT/NITROCHARGER FITMENT:
OME661 or OME662 (suits 40mm diameter control arms) Lower Shock Mount Stone Guard is recommended fitment to rear
shocks to protect against severe stone peppering encountered on loose road surfaces.
4
Original rear rake is 60mm approximately with OE coil rates of 145lbs/in or 25.5N/mm.
Customers wishing to lower the rear height but increase the load carrying ability can select from:
2866 - Reduces OE height by 10mm (rates 240 - 300lbs/in, 42 - 52.5N/mm)
2862 - Reduces OE height by 30mm (rates 240lbs/in, 42N/mm)
5
Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment
of a FK27 Lower Control Arm Reinforcing Bracket Kit is strongly recommended.
Page 69
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 105 SERIES & 80 SERIES WAGONS
LIVE AXLE FRONT SUSPENSION MODELS
FRONT
Estimated Lift: 10 - 50mm
SPRING: TO 50 KGS - 50mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KG-50mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: TO 110 KGS - 10mm
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
Estimated Lift: 20 - 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
PETROL & DIESEL ENGINES
PART NUMBER
QTY
2851
60018
*N73 / N70
1
2861
60070
N73
OME80PF05
OME80PF10
OMESD24
OMECA77B
1
2
3
2
1
1
QTY
2860
60020
*N74E / N71E
1
2864
60071
N74E
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
2868
60071
N74E
SPRING: MEDIUM 20mm LIFT
NITROCHARGER SPORT
NITROCHARGER
2862
60020
*N74E / N71E
OME80PR05
OME80PR10
OME661
Estimated Lift: 50mm
2
PART NUMBER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
1
1
ALL MODELS
2863
60020
N74E
STONE GUARD KIT
2
1
2850
*60070 / 60018
N73
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
1
1
1
UNIT
PRICE $
1
3 Packers must be installed on the top
2
1
of coil springs.
4 OME662 or OME661 Lower Shock
1
Mount Stone Guard is recommended
fitment to protect against severe
stone pepppering encountered on
loose road surfaces. OME662 will
only fit Models with 40mm diameter
control arms.
2
1
20mm to lift height shown which is
based on average for petrol and
diesel engines.
caster angle by 3o. Check
manufacturer's specifications to
determine if OMECA77B kit is
required.
2
1
1 For Models built from 8/1991 add
2 OMECA77B Caster Kit will increase
1
1
2
3
4
1
LPG CONVERSION
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2860
60020
*N74E / N71E
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2863
60020
N74E
OME80PR05
OME80PR10
OME661
STONE GUARD KIT
REMARKS:
2
PART NUMBER
TRIM PACKER
UNIT
PRICE $
1
UNIT
PRICE $
2
1
1
2
3
4
1
Page 70
OME INT NO.28.1 DECEMBER 2012
OFF ROAD USE ONLY - TOYOTA
LANDCRUISER 80 & 105
SERIES
7
FRONT
PART NUMBER QTY
UNIT
PRICE $
COMMENTS
COILS
75mm LIFT - SPRING TO 50KG
75mm LIFT - SPRING 51 TO 110KG
100mm LIFT - SPRING TO 50KG
100mm LIFT - SPRING 51 TO 110KG
125mm LIFT - SPRING TO 50KG
2418
3039
2419
3051
2420
1
1
1
1
1
220 lbf/in
300 lbf/in
220 lbf/in
300 lbf/in
60070L
2
Suits 75mm &100mm coils
OMESD24
1
300 lbf/in
SHOCKS
NITROCHARGER SPORT
STEERING DAMPER
STABILISER
COMPONENTS
ADJUSTABLE PANHARD ROD
COIL SPRING TRIM PACKER
COIL SPRING TRIM PACKER
REAR
PANR007
PAN3050
OME80PF05
OME80PF10
RHD only
LHD only
5mm
1
10mm
PART NUMBER QTY
UNIT
PRICE $
COMMENTS
COILS
75mm LIFT - MEDIUM
75mm LIFT - CONSTANT 200KG
75mm LIFT - CONSTANT 400KG
100mm LIFT - MEDIUM
100
100mm
LIFT - CONSTANT 200KG
100mm LIFT - CONSTANT 400KG
125mm LIFT - MEDIUM
2421
3040
3049
2422
3043
3052
2423
1
1
1
1
1
1
1
280 lbf/in
60071L
2
Suit 75mm & 100mm coils
PANR008
LTA3043
UTA3036
OME80PR05
OME80PR10
1
1
1
RHD & LHD
250 lbf/in
320 lbf/in
280 lbf/in
250 lbf/in
lbf/i
320 lbf/in
280 lbf/in
SHOCKS
NITROCHARGER SPORT
COMPONENTS
ADJUSTABLE PANHARD ROD
HEAVY DUTY LOWER TRAILING ARMS
ADJUSTABLE UPPER TRAILING ARMS
TRIM PACKER
Standard Length
40mm on car adjustable
5mm, MUST be installed top of coil
10mm, MUST be installed top of coil
Notification: Modifications for off - road use only
The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public
road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the
customer.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and will depend on vehicle weights.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of
competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies".
This will prevent any future misunderstanding.
Page 71
OME INT NO.28.1 DECEMBER 2012
TOYOTA
PRADO 150 SERIES 2009 ON LWB4 COIL SPRUNG MODELS ONLY
FRONT
Estimated Lift: 30mm
V6 4.0L PETROL ENGINE
PART NUMBER
SPRING: NO BAR
STRUT - SPORT
2883
90010
SPRING: BAR ONLY
STRUT - SPORT
2883
90010
1
QTY
5
2
1
2
UNIT
PRICE $
2869
90010
2869
90010
OME95PF5
FRONT
V6 4.0L PETROL ENGINE
Estimated Lift: 50mm
2869
90010
SPRING: BAR ONLY
STRUT - SPORT
2884
90010
REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
QTY
1
2
1
2
2885
90010
OME95PF5
1
2
PART NUMBER
QTY
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
2895
*60081 / 60080
3
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
TRIM PACKER
STONE GUARD KIT
2896
60081
OME150PR10
OME661
3
1
2
1
2
1
2
3
1
2
1
2
1
2
1
2
1
2
1
2
1
PART NUMBER
2885
90010
2887
90010
OME95PF5
QTY
1
2
1
2
1
2
UNIT
PRICE $
1
2
1
2
1
2
1
UNIT
PRICE $
LWB MODELS
PART NUMBER
QTY
2889
60080
3
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
2898
*60081 / 60080
3
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
TRIM PACKER
STONE GUARD KIT
2899
60081
OME150PR10
OME661
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
1
UNIT
PRICE $
3.0L DIESEL ENGINE
2884
90010
1
2
1
2
1
2
QTY
LWB MODELS
3
Estimated Lift: 50mm
UNIT
PRICE $
1
2895E
60080
REAR
2884
90010
OME95PF5
1
PART NUMBER
SPRING: NO BAR
STRUT - SPORT
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
2
PART NUMBER
2883
90010
1
2
1
2
1
2
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
1
3.0L DIESEL ENGINE
3
1
2
1
2
1
2
3
1
UNIT
PRICE $
REMARKS:
1
Vehicles with KDSS, must have 1 x OME95PF5 packer installed on the front right hand side to maintain correct trim.
2
No top mounting bushes supplied, re-use OE bushes.
3
OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone
peppering encountered on loose road surfaces.
4
For Fitment to Models with Toyota's KDSS (Kinetic Dynamic Suspension System) fitted, please refer to OME's Fitting Hints & Tips
(OME Bulletin 70 LC200 KDSS Fitting Hints).
5
When 2883 fitted to Petrol Model ride height increase will be approximately 40mm.
Page 72
OME INT NO.28.1 DECEMBER 2012
TOYOTA
PRADO 150 SERIES SWB 2009 ON COIL SPRUNG MODELS ONLY
FRONT
Estimated Lift: 40mm
SPRING: NO BAR
STRUT - SPORT
SPRING: BAR ONLY
STRUT - SPORT
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
V6 4.0L PETROL ENGINE
PART NUMBER
QTY
2883
90016
2
2869
*90010 / 90016
2
2884
90010
OME95PF5
2
UNIT
PRICE $
1
2
1
2
1
2
3.0L DIESEL ENGINE
PART NUMBER
2869
90016
2
2884
*90010 / 90016
2
2885
90010
OME95PF5
1
QTY
2
UNIT
PRICE $
1
2
1
2
1
2
1
WAGON MODELS
PART NUMBER
QTY
2895E
60086
3
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
2895
*60080 / 60086
3
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
TRIM PACKER
STONE GUARD KIT
2896
60080
OME150PR10
OME661
3
1
2
1
2
1
2
3
1
UNIT
PRICE $
REMARKS:
1
V hi l with
Vehicles
ith KDSS,
KDSS mustt have
h
1 x OME95PF5 packer
k installed
i t ll d on th
the ffrontt right
i ht h
hand
d side
id tto maintain
i t i correctt ttrim
i
2
No top mounting bushes supplied, re-use OE bushes.
3
OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone
peppering encountered on loose road surfaces.
Page 73
OME INT NO.28.1 DECEMBER 2012
TOYOTA
PRADO 120 SERIES 4/2003 - 2009 LWB & SWB
EXCEPT TEMS MODEL (ELECTRONICALLY MODULATED SUSPENSION)
FRONT
Estimated Lift: 25mm
PETROL & DIESEL ENGINES
PART NUMBER
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
2883
*90000 / 90021
*N140S / N139S
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT
2884
90000
*N201S / N140S
SPRING: 101 TO 150 KGS
STRUT - SPORT
STRUT
TRIM PACKER
REAR
Estimated Lift: 40mm
2885
90000
N201S
OME95PF5
SPRING: 150 KGS - 400 KGS
NITROCHARGER SPORT
NITROCHARGER
2896
*60005 / 60004
*N202 / N142
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
2897
60005
N202
OME661
4
2
1
1
4
2
1
1
4
2
QTY
3
1
2
2
UNIT
PRICE $
1
2
2
1
2
2
2
1
SWB MODEL
PART NUMBER
QTY
2895E
1
NITROCHARGER SPORT
NITROCHARGER
*60004 / 60112
*N142 / N141
SPRING: 150KGS - 250KGS
NITROCHARGER SPORT
NITROCHARGER
2895
*60005 / 60004
*N202 / N142
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
STONE GUARD KIT
1
PART NUMBER
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
STONE GUARD KIT
1
UNIT
PRICE $
LWB MODEL
2895E
2895
*60004 / 60112
*N142 / N141
SPRING: MEDIUM LOAD
QTY
2896
60005
N202
OME661
2
UNIT
PRICE $
2
1
2
2
1
2
2
2
1
REMARKS:
1
To maintain front strut droop it is important front coils are selected as shown.
2
OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering
encountered on loose road surfaces.
3
2895E suits LWB Models without OE 2nd fuel tank. 2895 suits LWB Models with OE 2nd fuel tank.
4
No top mounting bushes supplied, re-use OE bushes.
Page 74
OME INT NO.28.1 DECEMBER 2012
TOYOTA
PRADO 90 SERIES TO 10/2002 LWB
FRONT
Estimated Lift: 40mm
V6 PETROL ENGINE
PART NUMBER
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
2880
90004
N91S / N91SC
SPRING: 51 TO 110 KGS
STRUT - SPORT
STRUT
TRIM PACKER
2881
90004
*N91SB / N91S
OME95PF5
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
1
PART NUMBER
2881
90004
N91S / N91SC
1
1
2882
90004
*N91SB / N91S
OME95PF5
1
2
QTY
1
UNIT
PRICE $
1
2
1
1
2
ALL MODELS
PART NUMBER
QTY
2890
60028
N86
1
2
2891
*60027 / 60028
*N86B / N86
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
2892
60027
*N86B / N86
OME80PF05
OME80PF10
OME661
STONE GUARD KIT
UNIT
PRICE $
2
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
QTY
DIESEL ENGINE
UNIT
PRICE $
REMARKS:
1
To maintain front strut droop it is
important front coils are selected as
shown.
2
OME661 Lower Shock Mount Stone
Guard is recommended fitment to rear
shocks to protect against severe stone
peppering encountered on loose road
surfaces.
2
1
2
2
1
2
2
2
1
TUNDRA 2007 ON
FRONT
Estimated Lift: 60mm
PART NUMBER
QTY
SPRING: NO BAR
STRUT
2612
N192S
1
SPRING: BAR ONLY
STRUT
2614
N192S
1
SPRING: BAR & WINCH
STRUT
2613
N192S
1
UNIT
PRICE $
1
2
1
2
1
2
REMARKS:
1 No top mounting bushes supplied, re-
use OE bushes.
2
Models with rear sway bar will require
end link modifications to retain sway
bar in operation.
3
FK32 Brake Line and ABS Wire
Bracket Relocation Kit is a mandatory
fitment.
REAR
Estimated Lift: 60mm
SPRING: MEDIUM LOAD
NITROCHARGER
XL LEAF
SPRING BUSH KIT
U BOLTS
FITTING KIT
GREASABLE SHACKLE KIT
PART NUMBER
CS055R
N193
D28XL
OMESB106
OMEU53B
FK32
OMEGS22
QTY
2
3
2
2
2
1
4
1
1
Page 75
UNIT
PRICE $
OME INT NO.28.1 DECEMBER 2012
TOYOTA
FJ CRUISER 2010 ON
FRONT
Estimated Lift: 50mm
SPRING: NO ACCESSORIES
NITROCHARGER SPORT
SPRING: TO 60 KGS
NITROCHARGER SPORT
SPRING: 60 TO 120 KGS
NITROCHARGER SPORT
TRIM PACKER
REAR
Estimated Lift: 50mm
REMARKS:
PART NUMBER
QTY
2883
*90010 / 90016
1
2884
90010
1
1
2
1
2
1
2
2885
90010
OME95PF5
1
1
2
No top mounting bushes supplied, reuse OE bushes.
OME661 lower shock mount guard is
recommended fitment to rear shocks
to protect against severe stone
peppering encountered on loose road
surfaces.
ALL MODELS
PART NUMBER
QTY
SPRING: LIGHT LOAD
NITROCHARGER SPORT
2895E
*60080 / 60086
2
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
2895
*60081 / 60080
2
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
STONE GUARD KIT
UNIT
PRICE $
2896
60081
OME661
2
UNIT
PRICE $
1
2
1
2
1
2
1
FJ CRUISER 2006 TO 2010
FRONT
Estimated Lift: 50mm
SPRING: NO ACCESSORIES
STRUT - SPORT
STRUT
SPRING: TO 60 KGS
STRUT - SPORT
STRUT
SPRING: 60 TO 120 KGS
STRUT - SPORT
STRUT
TRIM PACKER
REAR
Estimated Lift: 50mm
REMARKS:
PART NUMBER
QTY
2883
90000 / 90021
N140S
1
1
2884
90000
N140S
1
1
2885
90000
N140S
OME95PF5
1
2
2
No top mounting bushes supplied, reuse OE bushes.
OME661 lower shock mount guard is
recommended fitment to rear shocks
to protect against severe stone
peppering encountered on loose road
surfaces.
2
1
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
2895E
*60004 / 60112
N141
1
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2895
*60004 / 60112
N141
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
STONE GUARD KIT
UNIT
PRICE $
2896
60081
OME661
UNIT
PRICE $
2
1
2
2
1
2
1
Page 76
OME INT NO.28.1 DECEMBER 2012
TOYOTA
FORTUNER 2004 ON
FRONT
Estimated Lift: 40mm
PART NUMBER
QTY
SPRING: TO 75 KGS
STRUT - SPORT
STRUT
2883
*90002 / 90011
*N167S / N166S
1
SPRING: 76 TO 120 KGS
STRUT - SPORT
STRUT
TRIM PACKER
2884
*90002 / 90011
N167S
OME95PF5
REAR
Estimated Lift: 40mm
1
UNIT
PRICE $
2
1
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2802
60078
N191
1
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
2803
60077
N191
1
UNIT
PRICE $
2
2
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
Page 77
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 70 SERIES DUAL CAB
FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
TRIM PACKER
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
REAR
Estimated Lift:
All Models: 45mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
PETROL & DIESEL
6 CYLINDER ENGINES
PART NUMBER
6
2856
60008
*N181 / N106
CS013R 5
60010
*N75F / N75E
CS015R
60011
N197
SPRING: CONSTANT 700 KGS
NITROCHARGER SPORT
CS066R 5
60109
OMESB101
OMESB85
OMEGS10
OMEGP7
OMEU59B
OMESTAB2
FK45
FK44
FK51
FK58
D14XL
UCB17
SWAY BAR FIT KIT
BRAKE PROPORTIONING KIT
EXTRA LEAF
CENTRE BOLT
PART NUMBER
6
2859
60008
*N181 / N106
1
2
PART NUMBER
SPRING: CONSTANT 500 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SWAY BAR
UNIT
PRICE $
6
2853
60008
N181
OMESD47
OMECA77B
FK19
OME79PF10
OMESTAB3
FK65
1
2
1
1
1
1
70 SERIES DUAL CAB
CS014R
60011
N197
GREASABLE SHACKLE KIT
9
6 9
2859
60008
N181
3
OMESD47
OMECA77B 1
FK19
4
OME79PF10
NOT APPLICABLE
FK65
9
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
QTY
V8 DIESEL ENGINE
QTY
8
UNIT
PRICE $
8
8
7
8
2
2
2
9
1
2
4
1
1
1
9
1
1
3
1
2
OMESB101: Use on original shackles
and pins
for 79.
p
OMESB85: Use for all Models when
installing OME greasable shackles
and pins.
2
2
2
OMECA77B Caster Kit will increase
caster angle by 3o. Check
manufacturer's specifications to
determine if OMECA77B kit is
required.
2
5
1
1
2
2
9
UNIT
PRICE $
REMARKS:
2
5
QTY
3
OMESD47 suits 2007 On Models
(open length 750mm).
4
Should the front drive shaft contact the
sway bar when the suspension is at
full droop, use FK19 Spacer Kit to
pack the sway bar down.
5
Include tray weight in constant load
calculation.
6
For heavily loaded applications it may
be necessary to step down one spring
selection in the front to maintain
correct rake.
7
OMESTAB2 Sway Bar is highly
recommended fitment when 700kg
Constant Spring is used. Sway Bar
can also be fitted to lighter rated
springs to improve road handling.
FK44 suits Models with OE axle sway
bar mount. FK45 suits Models without
OE sway bar provision.
2
1
7
4
1
7
1
8
1
2
2
8
FK51 is Brake Proportioning Valve Kit for medium load and 300kg spring. FK58
is for 500kg and 700kg spring. Due to variance in tray clearance on 70 Series
Dual Cab please check vehicle before selecting Fit Kit.
9
For vehicles fitted with ABS brakes an ABS Wire Bracket Kit must be fitted.
Page 78
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 76 SERIES WAGON
FRONT
Estimated Lift: 50mm
SPRING: TO 60 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 61 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
V8 DIESEL ENGINE
PART NUMBER
2856
60008
N106
SPRING: MEDIUM
NITROCHARGER SPORT
NITROCHARGER
9
9
1
4
8
CENTRE BOLT
STONE GUARD KIT
EXTRA LEAF
SWAY BAR
SWAY BAR FIT KIT
BRAKE PROPORTIONING BRACKET
1
Be sure to select OME Bush Kits
carefully:
OMESB85: Use for all Models when
installing OME greasable shackles
and pins.
1
1
1
1
1
QTY
CS057R
60010
*N197 / N75E
2
5
CS070R 6
60111
OMESB86
OMESB85
OMEGS19
OMEGP7
FK38
OMEU59B
OMEU59D
UCB17
OME661
D35XL
OMESTAB2
FK45
FK44
FK51
FK58
U BOLTS
2
1
PART NUMBER
SPRING: CONSTANT 800 KGS
NITROCHARGER SPORT
ANTI-INVERSION KIT
OMECA77B Caster Kit will increase
caster angle by 3o. Check
manufacturer's specifications to
determine if required.
OMESB86: Use when original
shackles and pins are used.
3
To prevent springs from inverting it is
mandatory that either OMEGS19
Greasable Shackle Kit or FK38 AntiInversion Kit be installed.
4
Should the front drive shaft contact the
sway bar when the suspension is at
full droop, use FK19 Spacer Kit to
pack the sway bar down.
5
OME661 Lower Shock Mount Stone
Guard is recommended fitment to rear
shocks to protect against severe stone
peppering encountered on loose road
surfaces.
ALL MODELS
CS058R
*60111 / 60011
N197
GREASABLE SHACKLE KIT
1
2
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
UNIT
PRICE $
2
8
2859
60008
N181
OMESD47
OMECA77B
FK19
OMESTAB3
FK65
REAR
Estimated Lift: 50mm
8
QTY
REMARKS:
UNIT
PRICE $
2
2
5
2
10
5
2
2
2
2
3
3
10
1
FK44 suits Models with OE sway bar
mount. FK45 suits Models without
sway bar provision. OMESTAB2
Sway Bar is highly recommended
when 800kg constant spring is used.
1
4
6
2
1
2
1
6
1
7
1
5
6
8
For vehicles fitted with ABS brakes, an ABS Wire Bracket Kit must be fitted.
9
For heavily loaded applications it may be necessary to step down one spring
selection in the front to maintain correct rake.
7
FK51 is Brake Proportioning Kit for
400kg spring. FK58 is for the 800kg
spring.
10 Use OMEU59B when fitting CS070R springs.
Page 79
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 78 SERIES
FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
TRIM PACKER
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
PETROL & DIESEL
6 CYLINDER ENGINES
PART NUMBER
6
2856
60008
*N181 / N106
QTY
9
UNIT
PRICE $
6
2859
60008
*N181 / N106
2
6 9
2859
60008
N181
OMESD24
5
OMESD47
OMECA77B 1
FK19
4
OME79PF10
NOT APPLICABLE
FK65
9
2853
60008
N181
1
2
1
OMESD47
1
1
OMECA77B
FK19
OME79PF10
OMESTAB3
FK65
1
78 SERIES TROOP CARRIER
Estimated Lift:
All Models: 45mm
PART NUMBER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
3
CS013R
60010
*N75F / N75E
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
CS014R
60011
N197
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
CS015R
60011
N197
SPRING: CONSTANT 800 KGS
NITROCHARGER SPORT
CS066R
60109
OMESB86
OMESB85
OMEGS19
OMEGP7
OMEU59B
OMESTAB2
FK45
FK44
FK34
FK51
FK58
D14XL
UCB17
GREASABLE SHACKLE KIT
U BOLTS
SWAY BAR
SWAY BAR FIT KIT
SWAY BAR EXTENSION BRACKET KIT
BRAKE PROPORTIONING KIT
EXTRA LEAF
CENTRE BOLT
PART NUMBER
1
REAR
SPRING BUSH KIT
V8 DIESEL ENGINE
3
QTY
8
UNIT
PRICE $
8
2
9
1
2
1
4
1
1
9
1
1
1
OMECA77B Caster Kit will increase
caster angle by 3o. Check
manufacturer's specifications to
determine if OMECA77B kit is
required.
2
OMESB85: Use for all Models when
installing OME greasable shackles
and pins. OMESB86: Use for Troop
Carrier Models when original shackles
and pins are used.
3
FK34 Sway Bar Extension Bracket Kit
must be installed to prevent damage to
sway bar mounts, due to increased
suspension travel. FK34 not needed if
fitting OMESTAB2.
4
Should the front drive shaft contact the
sway bar when the suspension is at
full droop, use FK19 Spacer Kit to
pack the sway bar down.
5
OMESD24 suits pre 2007 Models
(open length 651mm).
2
3
1
1
2
2
9
UNIT
PRICE $
REMARKS:
2
8
6
QTY
2
2
7
8
2
2
2
2
1
7
4
1
7
1
3
1
8
1
OMESD47 suits 2007 On Models
(open length 750mm).
2
2
8
FK51 is Brake Proportioning Valve Kit for 200kg and 400kg spring. FK58 is for
600kg and 800kg spring.
9
For vehicles fitted with ABS brakes, an ABS Wire Bracket Kit must be fitted.
6
7
Page 80
For heavily loaded applications it may
be necessary to step down one spring
selection in the front to maintain
correct rake.
OMESTAB2 Sway Bar is highly
recommended fitment when 800kg
Constant Spring is used. Sway Bar
can also be fitted to lighter rated
springs to improve road handling.
FK44 suits Models with OE axle sway
bar mount. FK45 suits Models without
OE sway bar provision.
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 79 SERIES
FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
TRIM PACKER
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
REAR
Estimated Lift:
All Models: 45mm
PETROL & DIESEL
6 CYLINDER ENGINES
PART NUMBER
6
2856
60008
*N181 / N106
CS014R
60011
N197
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
CS015R
60011
N197
SPRING: CONSTANT 800 KGS
NITROCHARGER SPORT
CS066R 5
60109
OMESB101
OMESB84
OMESB85
OMEGS10
OMEGP7
OMEU59B
OMESTAB2
FK45
FK44
FK51
FK58
D14XL
UCB17
SWAY BAR FIT KIT
BRAKE PROPORTIONING KIT
EXTRA LEAF
CENTRE BOLT
PART NUMBER
6
2859
60008
*N181 / N106
1
2
PART NUMBER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SWAY BAR
UNIT
PRICE $
2853
60008
N181
1
2
1
OMESD47
1
1
OMECA77B
FK19
OME79PF10
OMESTAB3
FK65
1
79 SERIES SINGLE CAB
CS013R 5
60010
*N75F / N75E
GREASABLE SHACKLE KIT
9
6 9
2859
60008
N181
OMESD24
3
OMESD47
OMECA77B 1
FK19
4
OME79PF10
NOT APPLICABLE
FK65
4
9
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
QTY
V8 DIESEL ENGINE
QTY
8
UNIT
PRICE $
8
8
8
2
2
7
1
8
1
2
2
7
OMESTAB2 Sway Bar is highly recommended fitment when 800kg Constant
Spring is used. Sway Bar can also be fitted to lighter rated springs to improve
road handling. FK44 suits Models with OE axle sway bar mount. FK45 suits
Models without OE sway bar provision.
8
FK51 is Brake Proportioning Valve Kit for 200kg and 400kg spring. FK58 is for
600kg and 800kg spring. Due to variance in tray clearance on 79 Series please
check vehicle before selecting Fit Kit.
9
For vehicles fitted with ABS brakes, an ABS Wire Bracket Kit must be fitted.
Page 81
1
4
1
1
4
9
1
1
1
OMESB85: Use for all Models when
installing OME greasable shackles
and pins.
3
OMESD24 suits pre 2007 Models
(open length 651mm).
OMESD47 suits 2007On Models
(open length 750mm).
1
7
2
OMESB84: Use on original shackles
and pins for 79 Series Models To
06/2009.
2
2
4
1
1
OMESB101: Use on original shackles
and pins for 79 Series Models from
07/2009 On.
2
2
9
2
2
7
2
OMECA77B Caster Kit will increase
caster angle by 3o. Check
manufacturer's specifications to
determine if OMECA77B kit is
required.
2
5
1
1
2
2
9
UNIT
PRICE $
REMARKS:
2
5
6
QTY
4
Should the front drive shaft contact the
sway bar when the suspension is at
full droop, use FK19 Spacer Kit to
pack the sway bar down.
5
Include tray weight in constant load
calculation.
6
For heavily loaded applications it may
be necessary to step down one spring
selection in the front to maintain
correct rake.
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 75 SERIES
FRONT
Estimated Lift: 50mm
PETROL ENGINE
PART NUMBER
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
CS006F
60009
*N88 / N92
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
CS006F
60063
*N50 / N88
OMEU51
OMESB1
OMEGS2
OMEGP1
OMESD24
FK08
D16XL
UCB5
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
REAR
Estimated Lift: 70mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2
CS007F
60063
*N50 / N88
OMEU51
OMESB1
OMEGS2
OMEGP1
OMESD24
FK08
D16XL
UCB5
2
2
4
2
1
2
5
PART NUMBER
CS006F
60009
*N88 / N92
2
2
PART NUMBER
CS006R 2
60010
*N75F / N75E
CS007R
60011
N75F
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
CS008R
60011
N75F
OMESB16
OMEU59B
OMEGS1
OMEGP2
OMEGP4
FK08
D25XL
UCB4
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
2
UNIT
PRICE $
1
1
2
2
QTY
2
UNIT
PRICE $
2
2
2
2
2
4
2
1
2
5
1
1
2
2
ALL MODELS
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
GREASABLE SHACKLE KIT
1
QTY
DIESEL ENGINE
QTY
4
UNIT
PRICE $
2
2
2
4
2
2
2
4
2
2
2
4
3
2
1
1
2
2
REMARKS:
1
2
Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack.
This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 100mm.
Shackles: FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted.
Note: Spring Caster Wedge OMECW2 (2o Caster Wedges) may be required to restore positive caster angle.
Front end alignment check will indicate required adjustment.
3
There can be 2 spigot sizes in the rear fixed end pins on 75 Series LandCruisers.
Check for correct size before ordering greasable pins. Part numbers are:
50mm spigot = OMEGP2.
51mm spigot = OMEGP4.
4 Include tray weight in constant load calculation.
5 D16XL suitable for CX006F.
Page 82
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER HZJ71 & HZJ74 SWB & MWB
FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
REAR
Estimated Lift: 60mm
DIESEL 4.2 ENGINES
PART NUMBER
QTY
2856
60008
N106
1
2859
60008
N106
OMESD24
OMECA77B
1
2
2
1
1
1
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS017RB
60044
N68
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
CS004RB
60044
N75
OMESB93
OMEU59A
OMEGS10
OMEGP7
GREASABLE SHACKLE KITS
UNIT
PRICE $
2
QTY
3
UNIT
PRICE $
2
2
2
3
2
2
3
2
4
3
1
REMARKS:
1
OMECA77B caster kit will increase caster angle by 3o. Check manufacturer's specifications to determine if
OMECA77B kit is required.
2
If rear bump stop measurements exceed 150mm remove 3rd leaf.
3
OME greasable shackles OMEGS10 & OMEGP7 are mandatory fitment. OE shackles cannot be used.
LANDCRUISER II WAGON
FRONT
Estimated Lift: 30mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
PART NUMBER
QTY
2872
60089
N77
1
UNIT
PRICE $
2
2874
60089
*N77B / N77
1
2
ALL MODELS
PART NUMBER
QTY
2873
60090
N79
1
2875
60090
*N79B / N79
UNIT
PRICE $
2
1
2
Page 83
OME INT NO.28.1 DECEMBER 2012
TOYOTA
BUNDERA RJ70 11/1984 - 1990
FRONT
Estimated Lift: 40mm
PETROL & DIESEL ENGINES
PART NUMBER
QTY
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
2870
60094
N114
1
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
2876
60094
N114
1
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
2871
60095
60096
N112
N113
1
1
1
1
1
UNIT
PRICE $
REMARKS:
1
N112 / 60095 fits left hand side.
N113 / 60096 fits right hand side.
LANDCRUISER 70, 73, 74 SERIES SWB & MWB
FRONT
Estimated Lift: 50mm
PETROL & DIESEL ENGINES
PART NUMBER
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
CS006F
60009
*N88 / N92
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
CS006F
60009
N88
OMESB1
OMEU51
OMEGS2
OMEGP1
OMESD24
FK08
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
REAR
Estimated Lift: 75mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
1
QTY
3
UNIT
PRICE $
1 Vehicles with no front accessory weight
2
will require the removal of the 4th leaf
from the top of the spring stack. This is to
maintain good shackle angle by not
allowing the bump stop measurement to
exceed 100mm.
2
2
2
2
4
2 If bump stop measurement exceeds 150 -
160mm remove 3rd leaf from top of spring
stack to prevent shock absorber from
topping out.
1
3
1
1
3 Shackles: FK08 Anti Inversion Kit is
ALL MODELS
PART NUMBER
CS017RA / B
60062
N85
CS004RA / B
60062
N85
OMESB1
OMEU59A
OMEGS2
GSP01
FK08
QTY
3
1+1
2
2
3
S
REMARKS:
UNIT
PRICE $
mandatory fitment front and rear if
greasable shackles are not fitted. Note:
Spring Caster Wedge OMECW2 (2o
Caster Wedges) may be required to
restore positive caster angle. Front end
alignment check will indicate required
adjustment.
1+1
2
2
4
1
4 There can be 2 spigot sizes of the rear
fixed end pins. Check spigot size
before ordering greasable pins.
50mm spigot = OMEGP2
51mm spigot = OMEGP4
4
3
1
Page 84
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 60, 61 & 62 SERIES
FRONT
Estimated Lift: 50mm
PETROL ENGINE
PART NUMBER
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
CS003F
60009
*N88 / N92
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
CS004F
60063
N88
OMESB1
OMEU51
OMEGS2
OMEGP1
OMESD24
FK08
D1XL
UCB3
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
REAR
Estimated Lift: 75mm
SPRING: RIDE/LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
1
QTY
2
UNIT
PRICE $
CS004F
60009
*N50 / N88
2
1
2
CS005F
60063
N50
OMESB1
OMEU51
OMEGS2
OMEGP1
OMESD24
FK08
D1XL
UCB3
2
2
2
4
1
2
7
PART NUMBER
2
1
1
2
2
QTY
5
UNIT
PRICE $
1
1+1
2
3
2
5
2
3
1
5
1+1
3
2
2
1
2
2
2
2
4
1
2
7
1
1
2
2
Front bump stop measurement must not
exceed 100mm to ensure good shackle
angle. To reduce bump stop gap, remove
the 4th leaf from the top of the spring.
OMECW2 Caster Wedge Kit may be
required to restore correct caster angle.
mandatory fitment if greasable shackles
are not fitted. Refer OME Technical &
Fitting Manual.
3 Post 1986 vehicles have a 19mm
Pre 1986 vehicles have a 16mm mounting
pin and suit shock part no's N95, N42,
N89, 60032 & 60064.
4 Fitting Kit is only required on vehicles with
rubber insulators around rear springs.
Refer OME Technical & Fitting Manual
Section 7 GFI: LandCruiser 60 Series
page 7 selection chart.
3
1
2
4
5 Barn door Models may require A/A or B/B
spring fitment. USA LHD Models require
A/A or B/B spring fitment.
1
6
2
mounting pin and suit shock part no's
N94, N90, N85, 60062 & 60065.
4
2
2
UNIT
PRICE $
2 Shackles: FK08 Anti Inversion Kit is
1+1
3
4
1
QTY
REMARKS:
3
CS004RA / B 2
*60064 / 60032
*60065 / 60062
*N90 / N85
*N42 / N89
FK0422
FK0411
CS005RA / B
60064
60065
N90
N42
FK0418
OMESB1
OMEU59B
OMEGS1
OMEGP1
FK08
D2XL
UCB2
PART NUMBER
2
ALL MODELS
CS017RA / B
60032
60062
N94
N95
DIESEL ENGINE
1
2
2
Page 85
6 D2XL only suitable for CS004RA/B &
CS005RA/B.
7
D1XL only suitable for CX003F &
CS004F.
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 45, 47 SERIES ALL LWB MODELS
FRONT
PETROL & DIESEL ENGINES
Estimated Lift: 35mm
PART NUMBER
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
CS001F
60097
N81
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS - 35mm Eye Spring
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
REAR
UNIT
PRICE $
1
2
CS002F
60097
*N41 / N81
See Chart Below
OMEU59A
OMEU59B
OMEU59A
OMEU55
See Chart Below
OMESD23
FK08
D3XL
UCB8
U BOLTS - 25mm Eye Spring
QTY
1
2
2
3
1
3
1
1
REMARKS:
1
1
2
2
1
FK08 Anti Inversion Kit is mandatory
fitment front and rear if greasable
shackles are not fitted.
2
Remove 3rd leaf from CS003R spring
stack to reduce spring rate for light
duty application. Include tray weight in
constant load calculation.
ALL MODELS
Estimated Lift: 50mm
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS003R
60032
N42
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
TRIM PACKER
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
1
QTY
UNIT
PRICE $
2
2
1
CS003R
60064
N42
See Chart Below
OMEU59B
TP02
See Chart Below
FK08
D8XL
UCB4
2
2
2
4
1
1
2
2
GREASABLE SHACKLES
Compatible Bush
Kit
QTY
1
1
1
1
OMESB1
OMESB1
OMESB30
OMESB30
2
2
2
2
1
2
1
1
OMESB79
OMESB79
OMESB30
OMESB30
2
2
2
2
KIT PART
NO.
QTY
OMEGS2
OMEGP1
OMEGS8
OMEGP8
18mm Shackle Pins & 30mm OMEGS17
Hanger Bracket
*GSP02
15mm Shackle Pins & 25mm OMEGS9
Hanger Bracket
OMEGP8
FRONT
18mm Shackle Pins & 35mm
Hanger Bracket
15mm Shackle Pins & 25mm
Hanger Bracket
UNIT
PRICE $
UNIT
PRICE $
REAR
* GSP02 is only a greasable pin replacement for original pin.
Page 86
OME INT NO.28.1 DECEMBER 2012
TOYOTA
LANDCRUISER 40, 42 SERIES SWB
FRONT
PETROL & DIESEL ENGINES
Estimated Lift: 35mm
PART NUMBER
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
CS001F
60097
N81
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS - 25mm Eye Spring
U BOLTS - 35mm Eye Spring
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
REAR
UNIT
PRICE $
2
2
CS002F
60097
N41
OMESB30
OMESB1
OMEU59A
OMEU59B
OMEU59A
OMEU55
See Chart Below
OMESD23
FK08
D3XL
UCB8
SPRING BUSH KIT
QTY
2
2
1
2
3
1
3
1
2
1
1
2
2
ALL MODELS
Estimated Lift: 60mm
PART NUMBER
CS001R
60032
*N89 / N95
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
QTY
UNIT
PRICE $
2
3
CS002R
*60064 / 60032
N89
OMEU59A
OMESB30
OMESB1
See Chart Below
FK08
D4XL
UCB8
2
2
3
2
4
1
2
2
1
2
2
REMARKS:
1
OMESB30 suits 35mm spring eye and 25mm hanger bracket with 15mm shackle pin hole.
OMESB1 suits 35mm spring eye and hanger bracket with 18mm shackle pin hole.
2
FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted.
3
1975 and newer FJ 40's may need to use N76 shocks in rear:
Pre 1975 shock eye in the top of the axle housing: Use N89 / N95 / 60032 / 60064
Post 1975 lower shock ey is below leaf spring: Use N76 with OMEB11 Bush Kit
GREASABLE SHACKLES
UNIT
PRICE $
REAR
QTY
1
OMEGS1
1
1
OMEGP1
1
OMEGS8
1
OMEGS9
1
OMEGP8
1
OMEGP8
1
FRONT
QTY.
18mm
Shackle Pin
OMEGS2
OMEGP1
15mm
Shackle Pin
Page 87
UNIT
PRICE $
Compatible
UNIT
Bush Kit
PRICE $
OMESB1
OMESB30
OME INT NO.28.1 DECEMBER 2012
TOYOTA
TACOMA V6 2005 ON
FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
STRUT
SPRING: 51 TO 100 KGS
NITROCHARGER SPORT
STRUT
REAR
Estimated Lift: 55mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
U BOLT
SPRING BUSH KIT
DRIVESHAFT SPACER KIT
PART NUMBER
QTY
2885
*90000 / 90021
N140S
1
2886
90000
N140S
UNIT
PRICE $
2
1
1
2
1
ALL MODELS
PART NUMBER
QTY
CS047R
60091
N182
OMEU53A
USE OE
FK29
UNIT
PRICE $
2
4
1
REMARKS:
1
No top mounting bushes supplied, re-use OE bushes.
TACOMA V6 & 4 CYLINDER 1998 - 2004
FRONT
Estimated Lift: 45mm
PART NUMBER
QTY
SPRING: TO 50 KGS
NITROCHARGER SPORT
STRUT
2880
90004
N91SC
1
SPRING: 51 TO 100 KGS
NITROCHARGER SPORT
STRUT
2881
90004
N91S
1
REAR
Estimated Lift: 55mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXHAUST BRACKET KIT
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
CS046RA / B
*60065 / 60062
N85
OMESB88
OMESB89
OMEGS12
FK21
QTY
2
UNIT
PRICE $
1+1
2
1
2
1
1
1
2
REMARKS:
1
OMESB88 must be used with OMEGS12 greasable shackles.
OMESB89 must be used with original shackles.
2
FK21 Exhaust Bracket is mandatory fitment to ensure exhaust system clears springs.
Page 88
OME INT NO.28.1 DECEMBER 2012
TOYOTA
HILUX/VIGO 2005 ON ALL MODELS
FRONT
Estimated Lift: 30mm
DIESEL ENGINES
PART NUMBER
SPRING: TO 75 KGS
STRUT - SPORT
STRUT
2883
*90002 / 90011
*N167S / N166S
SPRING: BAR ONLY
STRUT - SPORT
STRUT
2884
90002
N167S
SPRING: BAR & WINCH
STRUT - SPORT
STRUT
TRIM PACKER
2885
90002
N167S
OME95PF5
REAR
Estimated Lift: 45mm
SPRING: LOW LIFT 20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
QTY
1
1
2
2
1
1
2
2
1
1
2
2
UNIT
PRICE $
PETROL ENGINES
PART NUMBER
3058
*90002 / 90011
*N167S / N166S
2883
*90002 / 90011
*N167S / N166S
2884
90002
N167S
OME95PF5
QTY
1
1
2
2
1
1
2
2
1
1
2
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
CS043R-15
60006
N168
CS043R
60006
N168
CS044R
60006
*N169 / N168
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
CS045R
60007
N169
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KIT
BRAKE PROPORTIONING BRACKET
EXTRA LEAF
CENTRE BOLT
CS071R
60007
N169
OMESB98
OMEU53A
OMEGS14
FK59
D13XL
UCB14
QTY
3
UNIT
PRICE $
2
2
3
2
2
3
2
2
3
2
2
3
2
2
4
2
4
1
1
2
2
REMARKS:
1
To maintain coil clearance from the sway bar, the coil seat must be installed with the helix facing away from
the sway bar.
2
No top mounting bushes supplied, re-use OE bushes.
3
Include tray weight in constant load calculation.
4
D13XL will give approximately 22mm extra lift or increase loading capacity at design height by approximately 200kgs.
Page 89
OME INT NO.28.1 DECEMBER 2012
TOYOTA
HILUX/TIGER 1997 - 2004 ALL MODELS
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
303003
60042
*N87 / N80
OMESD33
REAR
Estimated Lift: 50mm
1
UNIT
PRICE $
1
2
1
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
CS018R 3
60043 + 60044
N68 + N68E
SPRING: CONSTANT 120 KGS
NITROCHARGER SPORT
CS019R 3
60043 + 60044
*N75 + N75E
N68 + N68E
NITROCHARGER
QTY
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
CS020R 3
60043 + 60044
*N75 + N75E
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
ANTI INVERSION KIT
U BOLT
FITTING KIT
EXTRA LEAF
CENTRE BOLT
CS021R 3
60043 + 60044
*N75 + N75E
OMESB43
OMEGS7
FK15
OMEU53A
FK01
D6XL
UCB6
QTY
5
2
2
1+1
5
2
2
1+1
5
2
2
1+1
5
2
2
1+1
3
4
6
UNIT
PRICE $
2
1
1
4
1
2
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
2
60043, N75E and N68E are longer in length and must be fitted to right hand side only. Fitment to left hand side may
cause damage to shock absorber and vehicle.
3
Mandatory Fitment: Either OMEGS7 or FK15 Anti Inversion Kit required to prevent possible spring inversion.
4
Fitment of FK01 Spacer Washers to U bolts is required to ensure correct tension is obtained on U bolts.
5
Include tray weight in constant load calculation.
6
D6XL suitable for CS019R, CS020R and CS021R.
Page 90
OME INT NO.28.1 DECEMBER 2012
TOYOTA
HILUX & 4 RUNNER PRE 1997 ALL LEAF SPRING MODELS
FRONT
Estimated Lift: 45mm
PETROL ENGINES
PART NUMBER
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
CS008FA / B
60061
N84
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
CS009FA / B 1
60061
*N93 / N84
OMESB5
OMEU52 +
OMEU53B
FK03
OMEGS4
OMEGP3
OMESD21
D17XL
UCB7
U BOLT
FITTING KIT
GREASABLE SHACKLE KITS
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
GREASABLE SHACKLE KITS
TRIM PACKER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT
1
2
QTY
3
UNIT
PRICE $
3
CS009FA / B 1
60061
N93
OMESB5
OMEU52 +
OMEU53B
FK10
OMEGS4
OMEGP3
OMESD21
D17XL
UCB7
1+1
2
2
3
2
1+3
1
1
1
2
2
ALL MODELS
PART NUMBER
CS009R 4 6
*60064 / 60032
*60065 / 60062
*N85 / N94
*N89 / N95
CS010R 4
60064
60065
N85
N89
OMEU53
OMESB6
OMEGS3
OMEGP3
TP04
FK09
FK13
D5XL
UCB6
QTY
7
2
PART NUMBER
CS009FA / B 1
60061
*N93 / N84
1+1
2
2
DIESEL ENGINES
UNIT
PRICE $
3
1+1
2
2
3
2
1+3
2
1
1
2
2
Petrol HiLux may require FK03
(Saddle Correction Plates) if the spring
seats
be
t are distorted.
di t t d FK10 mustt b
fitted to all Diesel & Petrol Models
used off road. Refer OME Technical
& Fitting Manual.
3
OMEU52 is required when fitting OME
springs to stop the U bolt contacting
the drag link. Refer OME Technical &
Fitting Manual.
4
A trim packer may be required to trim
vehicle. Only to be used on rear
springs.
5
Post 1984 vehicles have a 19mm
mounting pin and suit shock part
numbers: N85, N94, 60062 and
60065. Pre 1984 vehicles have a
16mm mounting pin and suit shock
part numbers: N89, N95, 60032 and
60064.
6
If greasable shackles are not fitted
Anti Inversion Kits must be fitted.
2
5
4
2
4
1
2
2
2
2
5
6
2
A/A spring fitment may be needed on
some vehicles for trimming purposes.
2
1
1+1
1
5
2
3
UNIT
PRICE $
REMARKS:
5
6 7
2
QTY
FK09 fits all pre 1984 Models.
FK13 fits all 1985 Models On.
7
Page 91
Include tray weight in constant load
calculation. To provide correct
shackle angle, 1985 - 89 automatic 4
Runner Models require the 3rd leaf to
be removed to reduce spring rate.
OME INT NO.28.1 DECEMBER 2012
TOYOTA
HILUX PRE 1997 EXTRA CAB & DUAL CAB SR5
IFS & REAR LEAF MODELS
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: 50 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
REAR
Estimated Lift: 50mm
303003
60072
N98
OMESD33
1
2
1
PART NUMBER
CS019R
60065
*N85 / N94
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
CS020R
60065
*N85 / N94
OMESB43
OMEU53
OMEU53B
OMEGS7
D6XL
GREASABLE SHACKLE KIT
EXTRA LEAF
1
UNIT
PRICE $
ALL MODELS
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
QTY
2
QTY
3
REMARKS:
UNIT
PRICE $
3
Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars.
2
Compare original spring stack height
to OME spring stack to decide whether
OMEU53 or OMEU53B U bolts are
required.
3
Include tray weight in constant load
calculation.
2
2
2
1
2
2
2
2
4
1
2
4 RUNNER 2010 ON (USA MODEL)
FRONT
Estimated Lift: 50mm
V6 4.0L PETROL ENGINE
PART NUMBER
QTY
SPRING: NO BAR
STRUT - SPORT
2883
90010
2
SPRING: BAR ONLY
STRUT - SPORT
2884
90010
2
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
1
1
2885
90010
OME95PF5
1
2
UNIT
PRICE $
1
2
1
2
1
2
1
LWB MODEL
PART NUMBER
QTY
2895
60080
3
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
2896
*60081 / 60080
3
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
TRIM PACKER
STONE GUARD KIT
2897
60081
OME150PR10
OME661
3
1
2
1
2
1
2
3
1
UNIT
PRICE $
REMARKS:
1
Vehicles with KDSS, must have 1 x OME95PF5 packer installed on the front right hand side to maintain correct trim.
2
No top mounting bushes supplied, re-use OE bushes.
3
OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe
stone peppering encountered on loose road surfaces.
Page 92
OME INT NO.28.1 DECEMBER 2012
TOYOTA
4 RUNNER 2003 TO 2010 (USA MODEL)
FRONT
Estimated Lift: 25-50mm
SPRING: NO BAR
STRUT - SPORT
STRUT
SPRING: TO 75 KGS
STRUT - SPORT
STRUT
TRIM PACKER
PART NUMBER
2884
90000
N140S
2885
90000
N140S
OME95PF5
QTY
1
1
2
2
1
1
2
2
UNIT
PRICE $
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
PART NUMBER
QTY
2895
60004
N141
1
UNIT
PRICE $
2
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
2896
*60005 / 60004
N142
1
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
STONE GUARD KIT
2897
60005
N142
OME661
1
2
2
1
REMARKS:
1
OME front coils can only be installed with OME Nitrocharger strut and coil seats.
2
No top mounting bushes supplied, re-use OE bushes.
4 RUNNER 1996 - 2002 (USA MODEL)
FRONT
Estimated Lift: 30mm
SPRING: TO 50KGS
SPRING: 51 TO 100KGS
NITROCHARGER SPORT
NITROCHARGER
REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 250KGS
NITROCHARGER SPORT
NITROCHARGER
PETROL & DIESEL ENGINES
PART NUMBER
QTY
2880
2881
90004
N91S
1
1
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
2906
2890
*60027 / 60028
N86
1
1
UNIT
PRICE $
2
Page 93
OME INT NO.28.1 DECEMBER 2012
TOYOTA
4 RUNNER 1990 - 1996 (TO 1995 IN USA)
IFS REAR COIL SPRING MODELS
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
REAR
Estimated Lift: 40mm
303003
60072
N98
OMESD33
QTY
UNIT
PRICE $
1
1
2
1
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
2900
60073
N72F
1
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
2901
60073
N72F
UNIT
PRICE $
2
1
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
4 RUNNER 1986 - 1990 (TO 1989 IN USA)
IFS REAR LEAF SPRING MODELS
FRONT
PETROL & DIESEL ENGINES
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
REAR
Estimated Lift: 50mm
303003
60072
N98
OMESD33
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
CS010R
60065
N85
OMESB6
OMEU53
OMEU53B
OMEGS3
OMEGP3
1
Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars.
2
Compare original spring stack height
to OME spring stack to decide whether
OMEU53 or OMEU53B U bolts are
required.
3
Install OE caster wedges from OE
spring stack onto OME springs.
Ensure wedges are fitted as per
original position.
1
2
1
PART NUMBER
CS009R
60065
*N85 / N94
GREASABLE SHACKLE KITS
1
UNIT
PRICE $
ALL MODELS
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
QTY
REMARKS:
2
QTY
3
UNIT
PRICE $
2
2
2
3
2
2
2
2
4
1
Page 94
OME INT NO.28.1 DECEMBER 2012
VOLKSWAGEN
AMAROK 2010 ON ALL MODELS
FRONT
Estimated Lift: 20mm
DIESEL ENGINE
PART NUMBER
QTY
SPRING: NO BAR
STRUT - SPORT
2640
90012
1
2
SPRING: BAR
STRUT - SPORT
2640
90013
1
2
1
2
SPRING: BAR & WINCH
STRUT - SPORT
TRIM PACKER
REAR
Estimated Lift: 20mm
2641
90013
OME95PF5
UNIT
PRICE $
1
2
1
2
1
2
2
DIESEL ENGINE
PART NUMBER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
CS064R
60082
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
STONE GUARD KIT
U BOLTS - MEDIUM SPRING
U BOLTS - CONSTANT 400KGS SPRING
EXTRA LEAF
CS065R
60083
OME665
OMEU59A
OMEU59B
D38XL
QTY
3
UNIT
PRICE $
2
4
3
4
4
2
1
4
5
2
REMARKS:
1
Top
stop
T mountt bump
b
t and
d bushes
b h nott supplied,
li d re-use OE items.
it
2
For trimming purposes only, maximum 1 packer per strut.
3
Re-use OE bushes. Workshop fitting kit FK33 recommended for easier bush install (note: one FK33 kit required
per workshop).
4
OME665 Lower Shock Mount Stone Guard is mandatory fitment to rear shocks to protect against
severe stone peppering encountered on loose rood surfaces.
5
D38XL will give approximately 12mm extra lift or increase loading capacity at design height by
approximately 160kgs.
Fitting Time: Due to the complexity of installation allow 5 hours for complete install.
Page 95
OME INT NO.28.1 DECEMBER 2012
BUSHES IN KITS
DIAGRAM #
OMESB2360
OMESB2360
1
OMESB2360
OMESB0052
1
1
2
1
4
4
4
4
7
7
7
7
OMESB2361
OMESB82
OMECA77B
OMEGQPF05
OMEGQPF10
OMESB0055
OMESB0056
OMESB0054
OMESB2365
OMESB2379
OMEGQPR05
OMEGQPR10
OMESB0062
OMESB0061
OMESB0054
OMESB2379
OMESB64
1
2
1
4
6
4
1
1
1
1
1
1
1
1
1
1
1
2
8
4
4
2
8
8
8
4
8
6
2
4
8
8
8
8
8
8
8
8
9
9
9
9
9
9
4
Suits OME springs only
F Spring bush
R Spring bush
OMESB19
OMESB19
2
2
6
6
4
4
Suits OE & OME springs
R Spring & shackle bush kit
OMESB90
2
6
4
Suits OE & OME springs
R Spring bush
R Spring bush
OMESB80
OMESB80
2
2
6
6
4
4
Suits OE & OME springs
Suits OE & OME springs
ALL
F Coil Packer - 10mm
OMELNF10
92 on
F Caster kit
CALR2
1
4
8
County 110 Model
84 to 92
F Caster kit
CALR1
1
4
8
Discovery All Models
89 to 99
F Caster kit
CALR2
1
4
8
Range Rover
72 to 86
F Caster kit
CALR1
1
4
8
Range Rover
86 to 95
F Caster kit
CALR2
1
4
8
OMESB2361
OMESB82
1
2
4
6
7
4
OMESB83
2
6
4
F Sway bar - link inner
OMESB2361
1
4
2
F Sway bar - link inner/outer
1
OMESB2360
2
4
2
OMESB8
2
6
4
OMESB2360
2
4
2
MODEL
YEAR
DAIHATSU
F Series All Models
5/93 on
Feroza All Models
Rocky All Models
10/88 on
4/84 to 93
FORD
Courier All Models
1/87 on
Maverick SWB & Wagon Models
8/87 to 9/93
Maverick Single Cab Models Leaf Springs
GMH / ISUZU
Drover
Jackaroo / Trooper Models
UBS 16 & 17
Rodeo - Isuzu Pick Up Models
All Models
V6 Models Only
LADA
Niva
2/85 on
8/85 to 91
81 to 87
88 on
LOC'N
OME P/NO.
KITS REQ
SUSPENSION BUSH KIT SELECTION
DESCRIPTION
F
R
F
F
Sway bar - link lower
Sway bar - link upper
Sway bar - link inner/outer
Sway bar - link eye
F Sway bar - link
R Spring bush
F Caster Kit
Coil Packer - 5mm
Coil Packer - 10mm
Control arm - to diff front/centre (std)
Control arm - to chassis
Panhard rod
Sway bar - D mount (15mm)
Sway bar - link
R Coil Packer - 5mm
Coil Packer - 10mm
Control arm - upper
Control arm - lower
Panhard rod
Sway bar - link
Spring & shackle bush kit
1
1
NOTE
LAND ROVER
Defender 90, 110 & 130 Models
MAZDA
B2500 & B2600
B2500 & B2600
3/87 to 98
F Sway bar - link
R Spring bush
MITSUBISHI
Challenger PA Wagon (Rear Leaf Springs)
Pajero
98 to 5/00
R Spring bush
NG
NA, NB, NC, ND, NE, NF & NG
9/89 to 5/91
83 to 5/91
All Leaf Spring Models
5/91 on
R Spring bush
Triton
Club Cab Model Only
F Sway bar - link inner/outer
1
When remaining stock of OME P/NO. is exhausted, no further product will be available.
Page 96
1
Suits 44mm wide control
arms
Suits 38mm wide control
arms
Suits 44mm wide control
arms
Suits 38mm wide control
arms
Suits 44mm wide control
arms
Suits V6 & intercooled
diesel models
Suits 4 cyl petrol & diesel
models not intercooled
OME INT NO.28.1 DECEMBER 2012
NISSAN
Navara D21 All
9/85 to 97
Navara D22 All
2/97 on
OME P/NO.
DIAGRAM #
10/96 on
DESCRIPTION
BUSHES IN KITS
YEAR
MITSUBISHI (continued)
Triton - cont.
Club Cab Model Only - cont.
MK Models
R Spring bush
R Spring & shackle bush kit
OMESB38
OMESB38
2
2
6
6
4
4
OMESB2379
OMESB81
OMESB2379
OMESB81
OMESB91
OMESB2379
1
2
1
2
2
1
8
6
8
6
6
8
1
4
1
4
4
1
LOC'N
MODEL
KITS REQ
SUSPENSION BUSH KIT SELECTION
NOTE
Pathfinder All
Patrol
8/86 to 94
F Sway bar - link
R Spring & shackle bush kit
Sway bar - link upper
R Spring & shackle bush kit
R Spring & shackle bush kit
F Sway bar - link
MQ (Round Head Lights)
80 to 8/84
F Spring (front eye) bush kit
OMESB28
2
2
4
Use with OMESB29/OE
springs use OMESB3
MQ (Square Head Lights)
8/84 to 87
F Spring (front eye) bush kit
OMESB31
2
2
4
Use with OMESB29 suits
OME springs
80 to 87
F Spring (rear eye) bush kit
R Spring & shackle bush kit
Spring bush
OMESB29
OMESB2
OMESB29
2
2
2
1
4
1
4
4
4
F Body mount - bumper area
OMESB9090
1
4
F Body mount - cab front
OMESB9091
1
4
Suits all wagon to 11/94 &
all hardtop models
F Body mount - cab centre
OMESB9092
1
4
Suits all wagon & hardtop
models
F Body mount - cab front & centre
OMESB9092
2
4
Suits pick up & cab
chassis models
Caster kit - Control arm
Control arm - to axle
Control arm - to chassis
Spring - eye front/rear & shackle
Panhard rod - bush
Sway bar - link
Coil Packer - 5mm
Coil Packer - 10mm
Body mount - cab rear to axle
Body mount - cab rear to axle
Panhard rod - bush
Spring - eye front/rear & shackle
OMECA77B
OMESB0055
OMESB0056
OMESB1
OMESB0054
OMESB2379
OMEGQPF05
OMEGQPF10
OMESB9092
OMESB9092
OMESB0054
OMESB64
1
1
1
2
1
1
4
8
4
6
4
8
2
1
1
2
4
4
4
6
9
4
R Sway bar - link
OMESB2379
1
8
9
R Control arm - lower
R Control arm - upper
R Coil Packer - 5mm
Coil Packer - 10mm
OMESB0061
OMESB0062
OMEGQPR05
OMEGQPR10
1
1
8
8
9
9
F Body mount - bumper area
OMESB9090
1
4
Suits wagon & hardtop, no
kit available for cab
chassis model
F Body mount - cab front
OMESB9091
1
4
Suits all wagon & hardtop
models
OMESB9092
1
4
OMESB9092
OMECA77B
OMESB0055
OMESB0056
2
1
1
1
4
4
8
4
MQ All Models
PATROL - Y60, GQ
11/87 to 97
F
F
F
F
F
F
F
R
R
R
R
PATROL - Y61, GU
10/97 on
Body mount - cab centre
F Body mount - cab front & centre
F Caster kit - Control arm - to axle
F Control arm - to axle
F Control arm - to chassis
1
When remaining stock of OME P/NO
P/NO. is exhausted
exhausted, no further product will be available
available.
Page 97
8
8
8
4
8
8
Suits models to 8/02
Suits models 10/02 on
Suits OE & OME springs
Suits OME springs
Suits wagon & hardtops,
no kit available for cab
chassis
Suits leaf spring models
Suits coil spring models
Suits all wagon models
Suits all hardtop models
Not suitable before 9/89
Leaf spring models
Suits cab chassis models
with coil suspension
Suits all wagon & hardtop
models
Suits all cab chassis
8
8
8
OME INT NO.28.1 DECEMBER 2012
OME P/NO.
BUSHES IN KITS
DIAGRAM #
YEAR
F Panhard rod - bush
OMESB0054
1
4
8
F Sway bar - link
OMESB2379
1
8
8 Suits coil spring models to 2001
F Sway bar - mount 15mm
R Body mount - cab centre to axle
Body mount - cab centre to axle
R Panhard rod - bush
OMESB2365
OMESB9092
OMESB9092
OMESB0054
1
2
1
1
2
4
4
4
8
9
R Sway bar - link
OMESB2379
1
8
9
R Trailing arm - lower
R Trailing arm - upper
R Coil Packer - 5mm
Coil Packer - 10mm
OMESB0061
OMESB0062
OMEGQPR05
OMEGQPR10
1
1
8
8
9
9
LOC'N
MODEL
KITS REQ
SUSPENSION BUSH KIT SELECTION
DESCRIPTION
NOTES
NISSAN (Continued)
PATROL - Y61, GU - cont.
SUZUKI
Jimny SN413
LJ50
LJ80
Sierra SJ410 & SJ413
TOYOTA
4 Runner
Leaf
R
L f Spring
S i Front
F t & Rear
R
4 Runner (Surf) LN60, YN60
10/97 on
R Coil Packer - 10mm
74 to 6/78 F Spring Bush
74 to 6/78 R Spring Bush
7/78 to 12/81 F Spring Bush
R Spring Bush
7/81 to 95 F Spring Bush
R Spring Bush
OMESB5
OMESB6
2
2
OMESB6
Suits cab chassis models with
coil suspension.
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
6
6
4
4
Suits OE & OME springs
Suits OE & OME springs
2
6
4
Suits OE & OME springs
OMESB0049
1
2 12
OMESB2915
OMESB3010
1
1
8
4
7
7
Suits LN130, RN130 models
Suits VZN130, YN130 models
OMESB5
OMESB2915
OMESB6
OMESB5
OMESB6
OMESB5
OMESB0049
OMESB6
2
1
2
2
2
2
1
2
6
8
6
6
6
6
2
6
4
4
4
4
4
4
4
4
Suits OE & OME springs
10/88 to 12/97 F Sway bar - mount 25mm
OMESB0049
1
2
1
Spring - bush kit
Sway bar - link
Sway bar - mount 25mm
Spring - bush kit
Sway bar - link
Sway bar - link
Sway bar - mount 25mm
Spring - bush kit
OMESB43
OMESB2915
OMESB0049
OMESB43
OMESB3010
OMESB3010
OMESB0049
OMESB43
2
1
1
2
1
1
1
2
6
8
2
6
4
4
2
6
4
1
1
4
1
1
1
4
OMESB30
OMESB1
2
2
6
6
4
4
7/84 to 10/85 F Spring - bush kit
R Spring - bush kit
LN167, 172, RZN169, 174
11/97 on
KZN165
12/99 on
LandCruiser 40 Series
,
, 47
BJ40,, 42,, FJ40,, 45,, ,JH45,
2
2
2
2
2
2
Does not suit ZD30 wagon
Suits all wagon models
Suits all hardtop models
4
4
4
4
4
4
4 Runner IFS Front Leaf Spring Rear
4 Runner (Surf) LN61, YN63
11/85 to 9/89 R Spring - bush kit
HiLux IFS Front & Coil Spring Rear
4 Runner (Surf) LN130, RN130, VZN130,
10/89 to 6/96 F Sway bar - mount 25mm
YN130
R Sway bar - link
R Sway bar - link
HiLux 4WD Leaf Spring Front & Rear
HiLux (Surf) LN36, 46 RN36, 46
4/79 to 10/83 F Spring - bush kit
F Sway bar - link
R Spring - bush kit
HiLux (Surf) LN65, YN 65, 67
11/83 to 9/88 F Spring - bush kit
R Spring - bush kit
HiLux (Surf) RN105, LN106
10/88 to 11/97 F Spring - bush kit
F Sway bar - mount 25mm
R Spring - spring bush
HiLux 4WD IFS Front & Leaf Spring
Rear
HiLux (Surf) LN107, 111, RN106, 110,
111
OMESJR10
OMESB25
OMESB25
OMESB19
OMESB19
OMESB19
OMESB19
Suits cab chassis all models &
wagon To 02/00
R
F
F
R
F
F
F
R
p g - bush kit-to suit 15mm ID
1969 to 12/84 F Spring
F Spring - bush kit-to suit 18mm ID
Page 98
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OME springs only
Suits OME springs only
Suits OME springs only
p g eye
y
Suits 35mm spring
Suits 35mm spring eye
OME INT NO.28.1 DECEMBER 2012
LandCruiser 60 Series
FJ60, 62, HJ60, 62
FJ62, HJ60, 61
LandCruiser 70 Series
Bundera (Prado NZ) LJ70, RJ70
BJ70, 73, 74
HJ75
FJ70, 73, 75
FZJ70, 75, HZJ70, 73, 75
BUSHES IN KITS
DIAGRAM #
TOYOTA (continued)
LandCruiser 40 Series - cont.
BJ40, 42, FJ40, 45, ,JH45, 47 - cont.
OME P/NO.
1969 to 12/84 R Spring - bush kit-to suit 15mm ID
OMESB30
2
6
4
R Spring - bush kit-to suit 18mm ID
OMESB79
2
6
R Spring - bush kit-to suit 18mm ID
OMESB1
2
6
Suits 35mm spring eye
Suits 35mm spring eye & 30mm
4
hanger bracket
Suits 35mm spring eye
4
YEAR
LOC'N
MODEL
KITS REQ
SUSPENSION BUSH KIT SELECTION
DESCRIPTION
11/80 to 8/87 F
F
R
R
8/87 to 12/91 F
F
F
R
R
Spring - bush kit
Sway bar - link
Spring - bush kit
Sway bar - mount 23mm
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Spring - bush kit
Sway bar - mount 23mm
OMESB1
OMESB2915
OMESB1
OMESB2327
OMESB1
OMESB2915
OMESB2327
OMESB1
OMESB2327
2
1
2
1
2
1
1
2
1
6
8
6
2
6
8
2
6
2
4
4
4
4
4
4
4
4
4
1/85 to 12/91 F
F
F
F
1/85 to 3/90 F
F
F
F
R
1/85 to 3/90 F
F
F
F
R
1/85 to 10/92 F
F
F
F
F
R
R
R
1/88 to 11/99 F
F
F
F
Panhard rod - bush
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 25mm
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway
bar
23mm
S
b - mountt 23
Spring - bush kit
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 23mm
Spring - bush kit
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 23mm
Sway bar - mount 25mm
Spring - bush kit
Spring - bush kit
Sway bar - mount 25mm
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 25mm
1
OMESB8133
OMESB2361
OMESB2327
OMESB0049
OMESB1
OMESB2361
OMESB2327
O
OMESB0063
S
OMESB1
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB16
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB0049
OMESB16
OMESB1
OMESB0095
OMESB1
OMESB2361
OMESB0063
OMESB0049
1
2
1
1
2
2
1
1
2
2
2
1
1
2
2
2
1
1
1
2
2
1
2
2
1
1
4
8
2
2
6
8
2
2
6
6
8
2
2
6
6
8
2
2
2
6
6
2
6
8
2
2
10
10
10
10
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
OMESB0095
1
2
4
OMESB16
OMESB1
2
2
6
6
4
4
R Sway bar - mount 25mm
OMESB0095
1
2
4
Spring - bush kit
Sway bar - link
Spring - bush kit
Caster kit
Control arm - to chassis
OMESB1
OMESB2361
OMESB1
OMECA77B
OMESB0050
2
1
2
1
1
6 4
8 4
6 4
4 10
4 10
OMESB2413
1
2 10
F Sway bar - mount 25mm
R Spring - bush kit
R Spring - bush kit
PZJ70, 73
FZJ78, 79, HDJ78, 79, HZJ78, 79
3/90 to 2/91
8/99 on
F
F
R
F
F
F Sway bar - link outer
1
NOTES
Suits OE & OME springs
Suits OE & OME springs
Suits models to 1/90
Suits OE & OME springs
Suits models to 8/87
Suits models 8/87 - 1/90
Suit OE & OME springs
Suits models to 5/86
Suits
S it models
d l 6/86 on
Suits OE & OME springs
Suits OE & OME springs
Suits models to 5/86
Suits models 6/86 on
Suits OE & OME springs
Suits models to 5/86
Suits models 6/86 on
Suits FJ75 models to 8/91
Suits FJ70, 73 models
Suits bracket height = 38mm
Suits OE & OME springs
Suits HZJ75 models to 4/91
Suits HZJ75 models to 4/91
Suits 4/91 on bracket height =
38mm
Suits FJ75 models
Suits HZJ70 & 73 models
Suits 4/91 on bracket height =
38mm
Suits OE & OME springs
Suits OE & OME springs
Caster align offset 3 degree
Contains new bolts, nuts &
crush tubes
When remaining stock of OME P/NO. is exhausted, no further product will be available.
Page 99
OME INT NO.28.1 DECEMBER 2012
8/99 on
LandCruiser 80 Series
FJ80, FZJ80, HDJ80, ,HZJ80
LandCruiser 100 Series
FZJ105, HZJ105 Solid Axle
1/90 to 2/98
3/98 on
LandCruiser Lexus
HDJ100, UZJ100 (Lexus) IFS
3/98 on
Tacoma
To 2004
DIAGRAM #
TOYOTA (continued)
LandCruiser 70 Series - cont.
FZJ78, 79, HDJ78, 79, HZJ78, 79 - cont.
OME P/NO.
KITS REQ
YEAR
OMESB2414
OMESB0046
OMESB3010
OMESB0052
OMESB3010
OMESB0095
1
1
1
1
1
1
2 10
4 10
4 8
4 4
4 4
2 4
Spring - bush kit
OMESB86
2
6
4
Spring - bush kit
OMESB84
2
6
4
Suits FZJ / HDJ / HZJ79
models with OME springs
Spring - bush kit
OMESB85
2
6
4
Suits all models with OME
springs & greasable shackles
OMECA77B
OMESB0050
OMESB0046
OMESB0045
OMESB0051
OMESB0044
OMESB0063
OMESB0094
OMESB0091
OMESB0092
OME80PF05
OME80PF10
OMESB0053
OMESB0052
OMESB3010
OMESB0049
1
1
1
2
1
1
1
1
1
1
4
4
4
6
4
4
2
2
2
2
1
1
1
1
4
4
4
2
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
R Sway bar - mount 25mm
OMESB0095
1
2
8
R Control arm - lower
R Control arm - upper
OMESB0047
OMESB0048
1
1
8
8
8
8
OMECA77B
OMESB0045
OMESB0050
OMESB0046
OMESB0044
OME80PF05
OME80PF10
1
2
1
1
1
4
6
4
4
2
10
10
10
10
10
F Sway bar - mount 29mm
OMESB0092
1
2 10
R
R
R
R
R
R
R
R
Sway bar - link upper
Sway bar - link lower
Panhard rod - bush
Sway bar - mount 25mm
Control arm - lower
Control arm - upper
Coil Packer - 5mm
Coil Packer - 10mm
OMESB3010
OMESB0052
OMESB0053
OMESB0095
OMESB0047
OMESB0048
OME80PR05
OME80PR10
1
1
1
1
1
1
4
4
4
2
8
8
8
8
9
8
8
8
F
R
R
R
Sway bar - link upper
Sway bar - link
Spring bush
Spring bush
OMESB2361
OMESB2915
OMESB88
OMESB89
1
1
2
2
4
8
4
4
7
7
4
4
LOC'N
MODEL
BUSHES IN KITS
SUSPENSION BUSH KIT SELECTION
F
F
R
R
R
F
F
F
F
F
F
F
F
F
F
F
F
R
R
R
R
F
F
F
F
F
F
F
DESCRIPTION
Sway bar - mount 31mm
Panhard rod - bush
Sway bar - link inner
Sway bar - link outer lower
Sway bar - link outer upper
Sway bar - mount 25mm
Caster kit
Control arm - to chassis only
Panhard rod - bush
Control arm - complete kit
Sway bar - link upper
Sway bar - link lower
Sway bar - mount 24mm
Sway bar - mount 26mm
Swayy bar - mount 26mm
Sway bar - mount 29mm
Coil Packer - 5mm
Coil Packer - 10mm
Panhard rod - bush
Sway bar - link lower
Sway bar - link upper
Sway bar - mount 25mm
Caster kit
Control arm - complete kit
Control arm - to chassis only
Panhard rod - bush
Sway bar - link lower
Coil Packer - 5mm
Coil Packer - 10mm
Page 100
NOTES
Suits bracket height = 38mm
Suits FZJ / HDJ / HZJ78
models with OME springs
Caster align offset 3 degree
Suits bracket height = 35mm
Suits bracket height = 35mm
Suits bracket height
g = 38mm
Suits bracket height = 38mm
Suits bracket height = 35mm
Suits large bracket height =
38mm
Caster align offset 3 degree
STD replacement
Suits large bracket (bracket
height = 38mm)
Suits bracket height = 38mm
Suits OME springs
p g onlyy
Suits original shackles only
OME INT NO.28.1 DECEMBER 2012
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS
Diagram 1.
Diagram 2.
Diagram 3.
Diagram 4.
Diagram 5.
Diagram 6.
Page 101
OME INT NO.28.1 DECEMBER 2012
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS
Diagram 7.
Diagram 8.
Diagram 9.
Diagram 10.
Diagram 11.
Diagram 12.
Page 102
OME INT NO.28.1 DECEMBER 2012
APPLICATIONS - SPECIFICATIONS - BUSH KITS
NUMERICAL SPRING & SHOCK BUSH
Kit No.
OMESB1
Component Description
spring bush PT260
OMESB2
OMESB6
spring bush PT280
spring bush PT281
spring bush PT282
spring bush PT230
spring bush PT229
spring bush PT240
spring bush PT231
spring bush PT231
2
2
2
4
2
2
4
6
OMESB7
OBSOLETE
6
OMESB8
spring bush PT290
spring bush PT291
spring bush PT292
shock bush SP1178 / 19
shock bush SP056 (cotton reel type)
shock bush OME066 / 16
OBSOLETE
shock bush SP091
shock bush OME1178 / 16
shock bush OME066 / 19
spring bush PT270
shock bush OME066 / 22
sleeve B17S 22 x 16 x 33
OBSOLETE
spring bush PT301
spring bush PT302
sleeve B19S 16 x 13 x 65
2
2
2
4
2
4
4
4
4
4
6
2
2
2
2
4
1
OMESB20
spring bush PT229
6
OMESB25
OMEB27
spring bush PT301
spring bush PT302
spring bush PT303
sleeve 16 x 13 x 65
sleeve 16 x 13.2 x 33
2
2
2
1
2
OMESB28
spring bush PT284
2
OMESB29
spring bush PT285 & sleeve
1
OMESB30
spring bush PT261
spring bush PT229
spring bush PT283
4
2
2
shock bush OME066 / 19
spring bush PT292
spring bush PT291
spring bush PT305
sleeve 19 x 14.2 x 81
shock bush OME 066-19MGQ
shock bush 305IY
2
2
2
2
1
2
8
OMESB3
OMESB4
OMESB5
OMEB9
OMEB10
OMEB11
OMEB12
OMEB13
OMEB14
OMEB15
OMESB16
OMEB17
OMEB18
OMESB19
OMESB31
OMEB36
OMESB38
OMEB40
OMEB42
Qty
6
To Fit
Toyota 35mm spring eye, 18mm pin OE & OME
Series F/H/B, J/ZJ: 75, 74, 73, 70, 60, 47, 45, 42, 40
Nissan GQ Patrol leaf spring models OME only
Nissan MQ Patrol all models - rear OE spring
Nissan MQ Patrol round headlight models-front OE spring eye
OBSOLETE
Toyota HiLux all models (except IFS front)
Toyota HiLux all models (except SR5 & extra cab rear)
Toyota FJ55 all models front & rear, 45 Series Rear only OE
springs 30mm eye
Mitsubishi Pajero leaf spring models & L200 models
Small eye bush with 19mm bore
Small eye shock mount
Converts large eye 19mm bore to a 16mm bore
Pin 12 x 60 replacement bush
Pin 10 x 60 replacement bush
Small eye with 16mm bore
Large eye with 19mm bore
40mm spring eye for Toyota 75 series rear springs
Large eye tapered bush with sleeve
Converts small eye bush to suit 19mm bore with sleeves
Suzuki Sierra all models except LJ50 front & rear springs
Toyota LandCruiser 40 series 25mm OE spring front & rear.
Toyota 45 series OE front spring only 25mm eye.
Suzuki LJ50 front & rear
N41 & N81 being converted for fitment to CJ Jeep and
Cherokee wagon 83 on front bottom mount. Mahindra
front & rear bottom mount.
Nissan MQ Patrol early model (round headlights)
- front spring, front eye (to be fitted with OMESB29)
Nissan MQ Patrol all models
- front spring, rear eye (to be fitted with OMESB28)
Toyota LandCruiser 45/47 Series front spring with 35mm
spring eye and hanger bracket with 15mm pin hole
Nissan MQ Patrol late model (square headlights)
- front spring, front eye (to be fitted with OMESB29)
large eye 19mm bore
All Triton to 1997 and L200 - rear - suits OME
springs only
N101, N22F & N29 Patrol GQ lower mount - rear shock
pin 14 x 70 replacement
cont.
Page 103
OME INT NO.28.1 DECEMBER 2012
APPLICATIONS - SPECIFICATIONS - BUSH KITS
NUMERICAL SPRING & SHOCK BUSH
Kit No.
OMESB43
OMESB57
OMESB64
Component Description
spring bush PT304
spring bush PT309
spring bush PT231
sleeve 19 x 14.1 x 68
spring bush PT306
spring bush PT307
sleeve 19 x 15 x 73
spring bush PT270
spring bush PT260
OMESB75
OBSOLETE
OMESB76
OBSOLETE
OMEB77
OMEB78
OMESB79
OBSOLETE
OBSOLETE
spring bush PT308
spring bush PT231A
spring bush PT304
spring bush PT231
sleeve 19 x 14 x 68
spring bush PT310
spring bush PT311
sleeve 22 x 18 x 70
spring bush PT281
spring bush PT314
spring bush PT315
sleeve 22 x 17 x 68
spring bush PT291
spring bush PT292
spring bush PT316
sleeve 22 x 16 x 80
spring bush PT317
spring bush PT318
sleeve 20 x 14 x 86
spring bush PT270
spring bush PT317
spring bush PT327
spring bush PT318
spring bush PT319
sleeve 20 x 14 x 86
spring bush PT307
spring bush PT320
spring bush PT321
sleeve 19 x 15 x 73
spring bush PT322
spring bush PT323
spring bush PT322
spring bush PT323
sleeve 18 x 14 x 69
spring bush PT231
spring bush PT282
spring bush PT310
spring bush PT311
spring bush PT326
sleeve 22 x 18 x 70
OMESB80
OMESB81
OMESB82
OMESB83
OMESB84
OMESB85
OMESB86
OMESB87
OMESB88
OMESB89
OMESB90
OMESB91
Qty
2
2
2
1
4
2
1
4
2
2
4
1
2
6
3
4
4
4
2
2
4
1
4
2
1
2
2
2
1
2
2
2
1
2
4
2
4
2
2
2
2
1
2
2
2
1
2
2
2
2
1
4
2
2
2
2
1
To Fit
Toyota HiLux IFS extra cab & SR5 dual cab models
being fitted with OME18 series spring
Jeep Wrangler - front & rear to suit OE shackles
Nissan Patrol GQ leaf spring cab chassis OME spring - rear
Land Rover Series III 88" & 109"
spring & shackle bushes OE replacement - front
Land Rover series III 88" & 109" spring &
shackle bushes OE replacement - rear
Land Rover Series III 88" & 109" lower shock bush - rear
Pin 10 x 60mm steering stabiliser mount
LandCruiser F/HJ45, 47 LWB models - OME spring
Holden / Isuzu Rodeo 1 tonne
rear spring to suit OE & OME springs
Nissan Navara 1 tonne
rear spring to suit OE & OME springs
Mazda / Ford 1 Tonne 4x4
1987 on rear spring OME only
Mitsubishi Challenger / Montero
rear spring to suit OME19 only
Toyota LandCruiser 79 Series cab chassis & utility model only
suit OME springs only
Toyota LandCruiser 78 & 79 Series
must be used with OME springs & greasable shackle kit only
Toyota LandCruiser 76 & 78 Series
Rear suit OME springs with OE shackles.
Jeep YJ Wrangler front and rear
Use only with greasable shackle OMEGS11
Toyota Tacoma rear shackle bushes only
Use with OME springs
Toyota Tacoma rear shackle bushes
for OEM shackles
Holden/Isuzu Jackaroo Trooper 1982-92
rear OME spring
Nissan Navara D22 model - rear spring
to suit OE & OME springs
cont.
Page 104
OME INT NO.28.1 DECEMBER 2012
APPLICATIONS - SPECIFICATIONS - BUSH KITS
NUMERICAL SPRING & SHOCK BUSH
Kit No.
OMESB93
OMESB95
OMESB96
OMESB97
OMESB98
OMESB99
OMESB100
OMESB101
OMESB102
OMESB103
OMESB105
OMESB106
OMESB107
Component Description
spring bush PT260
spring bush PT317
spring bush PT326
spring bush PT331
spring bush PT324
spring bush PT325
spring bush PT281
spring bush PT314
spring bush PT333
sleeve 19 x 14 x 72
spring bush PT328
spring bush PT329
spring bush PT333
sleeve 19 x 14 x 72
spring bush PT282
spring bush PT326
spring bush PT331
sleeve 18 x 14 x 69
spring bush PT282
spring bush PT324
spring bush PT325
sleeve 18 x 14 x 69
spring bush PT319
spring bush PT327
spring bush PT310
spring bush PT333
spring bush PT336
sleeve 19 x 14 x 72
spring bush PT335
spring bush PT333
spring bush PT336
sleeve 19 x 14 x 72
spring bush PT324
spring bush PT311
sleeve 22 x 18 x 70
spring bush PT317
spring bush PT282
spring bush PT333
sleeve 19 x 14 x 72
spring bush PT333
spring bush PT337
spring bush PT338
sleeve 19 x 14 x 72
Qty
4
2
2
2
2
2
2
2
2
1
2
2
2
1
2
2
2
1
2
2
2
1
4
2
2
2
2
1
2
2
2
1
4
2
1
2
2
2
1
2
2
2
1
To Fit
Toyota LandCruiser HZJ71 & HZJ74
Nissan D40 Navara suits OE shackle
kit only
Nissan D40 Navara suits OME greasable
shackle kit only
Mazda BT50 / Ford Ranger 2006 on
Toyota HiLux 2005 on
to suit OE & OME springs
Nissan Navara D40
suits original shackle kit only.
Nissan Navara D40
suits OME greasable shackle
kit: OMEGS15
Toyota LandCruiser 79 Series suits original shackle & pin from
07/2009 on
Ford Ranger PX 2011 on / Mazda BT-50 2011 on suits OE
shackle
Ford Ranger PX 2011 on / Mazda BT-50 2011 on suits OME
greasable shackle kit OMEGS20
Nissan Navara D22 suits OME greasable shackle
Toyota Tundra suits OME greasable shackle
Holden Colorado / Isuzu DMAX suits OE shackle
Page 105
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - BUSH KITS
OLD MAN EMU POLYURETHANE
SPRING BUSH DIMENSIONS
Dimensions
Part No.
PT229
PT230
PT231
PT240
PT260
PT261
PT270
PT280
PT281
PT282
PT283
PT285
PT290
PT291
PT292
PT301
PT302
PT304
PT305
PT306
PT307
PT309
PT310
PT311
PT314
PT315
PT316
PT317
PT318
PT319
PT320
PT321
PT322
PT323
PT324
PT325
PT326
PT327
PT328
PT329
PT330
PT331
PT333
PT335
PT336
PT337
PT338
D1
32.0
32.0
36.0
36.0
45.0
45.0
50.0
44.0
44.0
52.0
44.0
32.7
45.0
40.0
40.0
50.0
40
40.00
52.0
43.0
44.0
50.0
40.0
42.0
52.0
44.0
40.0
43.0
52.0
52.0
52.0
44.0
44.0
40.0
40.0
42.0
42.0
42.0
52.0
39.0
39.0
54.0
42.0
52.0
45.0
42.0
38.0
38.0
D2
24.9
24.9
30.0
30.0
35.0
35.0
40.0
32.7
32.7
40.0
32.7
None
31.5
28.0
27.5
40.0
30
30.00
40.0
31.5
31.4
37.6
30.0
32.6
40.0
32.0
32.7
31.5
39.8
39.8
40.0
31.8
31.8
32.0
30.0
33.0
33.0
33.0
39.8
30.0
30.0
39.5
33.0
39.9
32.0
32.0
30.0
30.0
d
15.0
15.0
18.0
18.0
18.0
15.0
18.0
18.0
18.0
18.0
18.0
22.0
18.0
16.0
16.0
16.0
13
13.00
19.0
19.0
18.1
18.1
18.0
20.1
22.2
18.0
22.2
22.2
18.0
20.0
18.0
18.0
18.0
18.0
18.0
19.0
19.0
20.1
18.0
19.0
19.0
19.0
20.1
19.0
18.0
20.0
18.0
18.0
Page 106
T
4.5
3.0
3.6
4.0
5.5
4.0
5.4
5.2
4.5
4.4
5.8
None
4.4
5.0
4.2
6.9
44.44
4.0
5.5
6.0
6.0
4.0
4.0
4.5
4.5
4.0
5.0
6.0
8.0
9.5
6.5
4.3
4.0
4.5
4.0
4.0
4.0
8.0
4.0
4.0
6.0
4.0
6.0
4.5
4.0
5.0
5.0
L
35.0
35.0
30.0
48.0
35.0
35.0
35.0
43.0
30.0
30.0
28.5
60.0
35.0
44.0
34.0
25.0
25
25.00
30.0
35.0
30.0
30.0
40.5
30.0
30.0
40.0
30.0
35.0
43.5
35.5
35.5
31.5
32.7
45.5
35.5
30.0
44.5
30.0
42.5
30.0
44.5
30.0
44.5
30.0
49.0
49.0
30.0
45.0
Number of Splines
9
9
9
9
11
9
13
11
11
13
13
0
11
9
9
13
9
9
0
9
0
0
0
9
0
9
0
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - FITTING KITS
SUSPENSION FITTING KITS
Part No.
Contains
Vehicle
Position
Refer to:
FK01
16 x Flat Washer
60 Series
Front
Manual Sec. 4 GFI - Front suspension installation
FK03
2 x Saddle Correction Plate
HiLux Petrol
Front
Manual Sec. 4 GFI - Front suspension installation
FK0411
4 x Retainer Spacer 11mm
60 Series
Rear
Manual Sec. 4 GFI
FK0418
4 x Retainer Spacer 18mm
60 Series
Rear
Manual Sec. 4 GFI
FK0422
4 x Retainer Spacer 22mm
60 Series
Rear
Manual Sec. 4 GFI - Rear suspension installation
FK047
4 x Retainer Spacer 7mm
60 Series
Rear
Manual Sec. 4 GFI - Rear suspension installation
FK06
2 x Stabiliser Bar Packer 3mm
Suzuki
Front
Manual Sec. 4 GFI - Front suspension installation
FK08
2 x Anti-Inversion Plate
60, 75 Series
Front & Rear
Manual Sec. 8 Technical - Shackle Modification
All 40 & 70 Series
GQ, Maverick ute & c/c
FK09
2 x Anti-Inversion Plate
All HiLux
Rear
Manual Sec. 8 Technical - Shackle Modification
FK10
2 x Short Gussett Plate
HiLux
Front
Manual Sec. 8 Technical - HiLux Front Springs
2 x Long Gussett Plate
All models
FK13
2 x Anti-Inversion Side Plate
All HiLux
Rear
Manual Sec. 4 GFI
FK14
2 x Anti-Inversion Plate
Isuzu 1 Tonne P/Up
Rear
Fitting instructions supplied with kit
FK15
2 x Ani-Inversion Side Plate
1997 on HiLux
Rear
Fitting instructions supplied with kit
FK16
2 x 20mm Bump Stop Spacer
Wrangler TJ
Rear
Fitting instructions supplied with kit
FK18
2 x Bracket
GU Patrol
Rear
Fitting instructions supplied with kit
3 x Bolt
Sway Bar
3 x Washer
3 x Nut
FK19
4 x Spacer Plate
LandCruiser
Front
4 x 35mm Bolt
78 & 79 Models
Sway Bar
6 x Spacer Plate
Land Rover Discovery
Front
8 x Bolt M8 x 1.25 x 35mm
1999 on Models
Cross
Fitting instructions supplied with kit
4 x Spring Washer
FK20
8 x Flat Washer
FK21
Fitting instructions supplied with kit
Member
1 x Bracket
Toyota
Rear
2 x Bolt M8
Tacoma
Exhaust
2 x Flat Washer
Bracket
2 x Hex Nut
FK22
2 x Shock Tower Support
Mazda / Ford
2 x Captive Nut
1 tonne pickup
Front
Fitting instructions
Front
Fitting instructions
Fitting instructions
4 x Bolt M10 x 1.5 x 30mm
4 x Flat Washer
4 x Spring Washer
Toyota / RAV 4
FK23
1 x Strut Adaptor
FK24
2 x Bracket
Nissan Y61
Rear
6 x Bolt
with stabiliser
Sway Bar
11 x Flat Washer
bar release
1998 to 2000
6 x Nut Nyloc
FK25
2 x Spacer Block
Nissan Y61
4 x Bolt
Oil Pan Kit
Front
Fitting instructions
4 x Flat Washer
4 x Spring Washer
FK26
2 x Side Plate
Isuzu / Rodeo 2003 on
Rear
Fitting instructions supplied with kit
FK27
2 x Support Bracket
LandCruiser
Torsion Bar
Fitting instructions supplied with kit
100 Series
Locating
IFS
Bracket
Suzuki XL7
Front
FK28
2 x Spacer
Fitting instructions supplied with kit
2 x Stud
cont.
Page 107
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - FITTING KITS
SUSPENSION FITTING KITS
Part No.
FK29
Contains
2 x Spacer
Vehicle
Toyota
Position
2 x Bolt M10 x 1.25 x 35mm
Tacoma 2005 on
Drive Shaft
Rear
Refer to:
Fitting Instructions
2 x Flat Washer M10 x 25mm
2 x Spring Washer M10 x 1/8
FK30
2 x Anti-Inversion Bracket
Mitsubishi
Rear
Fitting Instructions
FK31
1 x Bracket
Ford F250 & F350
Rear
Fitting instructions
6 x Bolt
1999 to 2004
4 x Nut x M10
Dual Cab Models
Tundra 2007 on
Front
Fitting instructions
2 x Nut x M10 Caged 3.3
6 x Spring Washer
10 x Flat Washer
FK32
1 x 3199908 Bracket
1 x 3199909 Kit
2 x Bolt M8 x 1.25 x 20
2 x Hex Nyloc Nut
4 x Flat Washer
FK33
Spring Bush Installation Tool
VK Amarok
Front
Fitting Instructions
FK34
2 x Bracket
LandCruiser 78 Series
Rear Sway
Fitting Instructions
FK35
1 x Spacer
Ford F250 & F350
2 x Bolt
1999 to 2004
2 x Nut
Xtra Cab
Bar Mounts
Rear
Fitting Instructions
Front
Fitting instructions supplied with kit
Jeep JK - LHD
Rear
Fitting instructions supplied with kit
LandCruiser
Rear
Fitting instructions supplied with kit
Rear
Fitting instructions supplied with kit
2 x Washer
FK36
4 x Bracket
Ford F350
8 x Bolt M8 x 1.25 x 20
2005 on
8 x Nut M8 x 1.25
16 x Washer
FK37
1 x Bracket
2 x Bump Stop Spacer
1 x Extension Plate
4 x Packer
2 x Bolt M14 x 1.5
2 x Nut M14 x 1.5
8 x Washer
2 x Bolt M12 x 1.25
2 x Nut M12 x 1.25
4 x Bolt M8 x 1.25 x 20
4 x Flanged Nuts M8 x 1.25
FK38
2 x Anti-Inversion Plate
76 Series
FK39
1 x Bracket
Jeep JK - RHD
2 x Bump Stop Spacer
1 x Extension Plate
4 x Packer
2 x Bolt M14 x 1.5
2 x Nut M14 x 1.5
8 x Washer
2 x Bolt M12 x 1.25
2 x Nut M12 x 1.25
4 x Bolt M8 x 1.25 x 20
4 x Flanged Nut M8 x 1.25
cont.
Page 108
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - FITTING KITS
SUSPENSION FITTING KITS
Part No.
FK40
Contains
4 x Bump Stop Spacer
Vehicle
Wrangler JK
Position
Front & Rear
Refer to:
Fitting instructions supplied with kit
2 x Bolt M10 x 1.5 x 75
4 x Bolt M8 x 1.25 x 70
4 x Washer
2 x Flanged Nut
4 x Nut Nyloc
FK41
2 x Bracket
GU Patrol - Leaf Sprung Rear
Fitting instructions supplied with kit
Xterra 2005 on
Rear
Fitting instructions supplied with kit
Y61 Patrol - Leaf Sprung Rear
Fitting instructions supplied with kit
LandCruiser 76/78/79
Series
Rear
Fitting instructions supplied with kit
LandCruiser 76/78/79
Series
Rear
Fitting instructions supplied with kit
JK Jeep
Front
Assembly Bump
Stop Spacer
FK42
2 x Sway Bar Packer
4 x Bolt M10 x 1.25 x 35
4 x Flat Washer
4 x Spring Washer
FK43
4 x Backing Plate
4 x Backing Plate Wear Clip
4 x Bolt M8 x 1.25
4 x Nyloc Hex Lock Nut
4 x Tube Spacer
FK44
2 x Saddle Bracket
2 x HD Bar Bracket (1 x RH, 1 x LH)
10 x Flat Washer M8 x 17
10 x Bolt M8 x 1.25 x 25
10 x M8 Spring Washer
FK45
2 x Axle Mount Bracket (1 x RH, 1 x LH)
1 x OMEU74 U Bolt
1 x OMEU75 U Bolt
2 x Saddle Bracket
1 x Brake Line Bracket
2 x Dropper Bracket (1 x RH, 1 x LH)
3 x Spacer Wing Mount
1 x Grub Screw M10 x 1.25 x 10
1 x M10 Flat Washer
1 x Nut Flange M10 x 1.25
9 x Flat Washer M8 x 17
9 x BZ Bolt M8 x 1.25 x25
9 x Spring Washer M8 x 3/32 x 3/32
FK46
2 x Front Brake Line Bracket (1 x RH, 1 x LH)
2 x Rear Brake Line Bracket (1 x RH, 1 x LH)
Rear
1 x Hand Brake Bracket
6 x Bolt M6 x 1.0 x 20 8.8BZ
10 x Washer M6 x 20 16G
5 x Nyloc Nut M6 x 1
2 x Spring Washer M6 x 2.5 x 1.6
2 x Caged Nut M6 1.7 - 2.5
FK47
1 x Track Bar Bracket
JK Jeep LHD
Rear
1 x Track Bracket Spacer
2 x U Bolt
1 x Bolt M14 x 1.5PX80
2 x Spacing Washer M14 x 23.5 x 5mm
1 x Nyloc Nut M14 x 1.5
cont.
Page 109
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - FITTING KITS
SUSPENSION FITTING KITS
Part No.
FK47RHD
Contains
1 x Track Bar Bracket
Vehicle
JK Jeep RHD
Position
JK Jeep
Front
Refer to:
Rear
1 x Track Bar Bracket Spacer
2 x U Bolt
1 x Bolt M14 x 1.5PX80
2 x Spacing Washer M14 x 23.5 x 5mm
1 x Nyloc Nut M14 x 1.5
FK48
2 x Front Sway Bar Link
2 x Rear Sway Bar Link
Rear
2 x Dis-connect Pin
2 x Park Pin
2 x Sway Bar Bracket (1 x RH, 1 x LH)
2 x R-clip 3.0 TZP
2 x Bolt 7/16 x 3 1/2 GR5
4 x Flat Washer 7/16
2 x Spring Washer 6/16 x 5/32 x 3/32
2 x Nut 7/16
2 x Nyloc Nut M12
2 x Nyloc Nut M10 x 1.25
2 x Flat Washer 1/2 x 1 1/8 x 3mm
2 x Flat Washer M10 x 20.6 x 2mm
Fitting Grease
FK49
8 x Driveline Packer
JK Jeep
3 x Crossmember Spacer
Front
Rear
2 x Flange Bolt M14 x 1.5 x 110 GR10.9
2 x Flange Bolt M14 x 1.5 x 10 GR10.9
4 x Flange Nut Conelock M14 x 1.5 Class 10
3 x Bolt M12 x 1.5 x 50mm 8.8
3 x Flat Washer 1/2 x 1 1/8 x 3mm
3 x Spring Washer 1/2 x 3/16 x 1/8
2 x Cable Tie 4.8 x 200mm
FK50
1 x Stabiliser Plate
JK Jeep
Front
Fitting instructions supplied with kit
2 x Brake Prop Bracket
LandCruiser 76/78/79
Rear
Fitting instructions supplied with kit
2 x Flange Nut M8 x 1.25 BZ
Series
JK Jeep
Front
Fitting instructions supplied with kit
Ranger / BT-50
Centre
Fitting instructions supplied with kit
1 x Stabiliser Spacer
1 x Bolt M10 x 1.25 x 25 8.8
1 x Flat Washer M10 x 20.6 x 2mm
1 x Flange Nut M10 x 1.25 FP
FK51
2 x Flat Washer M8 x 17 x 1.2
2 x Bolt M8 x 1.25PX20
FK53
4 x Driveline Packer
2 x Flange Bolt M14 x 1.5 x 110 GR10.9
2 x Flange Nut Conelock M14 x 1.5 Class 10
FK57
12 x Flat Washer M14 x 25 x 4
2 x Spring Washer M14 x 4mm x 3mm
Bearing
2 x Female Bolt M10 x 25 x 1.5 8.8
FK58
2 x Brake Prop Bracket
LandCruiser 76/78/79
2 x Flange Nut M8 x 1.25 BZ
Series
Rear
Fitting instructions supplied with kit
2 x Flat Washer M8 x 17 x 1.2
2 x Bolt M8 x 1.25PX20 4.6
2 x spring Washer M8 x 3/32 x 3/32
cont.
Page 110
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - FITTING KITS
SUSPENSION FITTING KITS
Part No.
FK59
Contains
1 x Brake Prop Bracket
Vehicle
HiLux 05 on
Position
Rear
Refer to:
Fitting instructions supplied with kit
LandCruiser 70 Series
Front Brakes
Fitting instructions supplied with kit
Rear
Fitting instructions supplied with kit
Manual Sec. 4 GFI Patrol Gearbox Spacer Kit
1 x Bolt M8 x 1.25PX20 8.8
1 x Hex Lock M8 x 1.25
2 x Flat Washer M x 17 x 1.6
1 x Spring Washer M8 x 3/32 x 3/32
FK65
1 x LH Bracket
1 x RH Bracket
2 x M8 Caged Nut
2 x Bolt M8 x 16 x 1.25
2 x Flat Washer M8 x 17
2 x Spring Washer M8
FKWTJ01
1 x 45mm Panhard Rod Extended
Wrangler
FKWTJ02
Mounting Bracket
TJ
2 x Spacer Washer
3 x Bolt M12 x 1.25 x 30mm
6 x Flat Washer
3 x Spring Washer
3 x Nut M12 x 1.25
GQGK01
4 x Spacer Plate
GQ Patrol
Gearbox
8 x Hex. Bolt
Maverick
Cross Member
4 x Spacer Plate
Nissan Y61
Gearbox
Fitting instructions
9 x Spacer 12mm
Patrol SWB
Gearbox
Fitting instructions supplied with kit
Gearbox
Fitting instructions
Gearbox
Fitting instructions
8 x Flat Washer
8 x Spring Washer
GQGK02
8 x Bolt M12 x 1.25 x 70mm
17 x Spring Washer
17 x Flat Washer
6 x Bolt M8 x 1.25 x 40mm
3 x Bolts M8 x 1.25 x 35mm
JWGK01
JWGK02
6 x Spacer Plate
Jeep
6 x Bolt Spacer
Wrangler
6 x 2" Bolt
to 2002
6 x Spacer Plate
Jeep TJ
6 x Bolt
2003 Manual
17 x Flat Washer
Models
17 x Spring Washer
JWGK03
8 x Spacer Plate
Jeep TJ
8 x Bolt
2003 Auto
8 x Flat Washer
Models
8 x Spring Washer
Page 111
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - LEAF SPRINGS
ADDING AN EXTRA LEAF
Part No.
Required Centre Bolt
To Suit Dakar Spring No.
D1XL
D2XL
D3XL
D4XL
D5XL
D6XL
D7XL
D8XL
D9XL
D10XL
D11XL
D12XL
D13XL
D14XL
D15XL
D16XL
D17XL
D18XL
D19XL
D20XL
D21XL
D22XL
D23XL
D24XL
D25XL
D26XL
D27XL
D28XL
D29XL
D30XL
D31XL
D32XL
D34XL
D35XL
D36XL
D38XL
EL39XL
UCB3
UCB2
UCB8
UCB8
UCB6
UCB6
UCB5
UCB4
UCB17
UCB5
UCB5
UCB1
UCB14
UCB17
UCB11
UCB5
UCB7
UCB14
UCB16
UCB7
UCB7
UCB8
UCB09
UCB09
UCB4
UCB15
UCB17
UCB17
UCB19
UCB10
-
CS003F & CS004F
CS004RA/B & CS005RA/B
CS001F & CS002F
CS001R & CS002R
CS009R & CS010R
CS019R & CS020R & CS021R
CS040R
CS003R
CS026R & CS027R
CS042R
CS010FA/B
CS011R & CS012R
CS043R & CS044R & CS045R & CS071R
CS013R & CS014R
CS016RA/B
CS006F
CS008FA/B & CS009FA/B
CS030R & CS031R & *CS032R
CS028R & CS029R
CS012FA/B
CS038R
CS034RA/B & CS035RA/B
CS014F
CS036R
CS006R & CS007R
CS062R & CS063R
CS048R
CS055R
CS047R
CS016F
CS150R
CS053R
CS049R & CS056R & CS068R & CS069R
CS057R
CS059R
CS064R & CS065R
EL072R & EL073R & EL074R
* FK01 U Bolt Thread Spacer Kit required on all Cab Chassis Models.
REMOVING A LEAF:
In general terms, to reduce a springs rate remove the third leaf from the top of the spring.
Except if the third leaf is fitted with a spring clip, in this case remove the fourth leaf.
Page 112
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - LEAF SPRINGS
REPLACEMENT MAIN & SECOND LEAF
DAKAR PART NUMBER
CS001F, CS002F
CS003F, CS004F, CS005F
CS006F, CS007F
CS008FA
CS008FB
CS009FA
CS009FB
CS010FA, CS011FA
CS010FB, CS011FB
CS012FA, CS013FA
CS012FB, CS013FB
CS014F
CS001R, CS002R
CS003R
CS004RA, CS005RA
CS004RB, CS005RB
CS006R, CS007R, CS008R
CS009R, CS010R
CS011R, CS012R
CS013R, CS014R, CS015R
CS016RA
CS016RB
CS017RA
CS017RB
CS018R, CS019R, CS020R, CS021R
CS022R, CS023R
CS024R, CS025R
CS026R, CS027R
CS028R, CS029R
CS030R, CS031R, CS032R
CS033RA
CS033RB
CS034RA, CS035RA
CS034RB, CS035RB
CS036R, CS037R
CS038R, CS039R
CS043R, CS044R, CS045R, CS071R
CS049R, CS056R, CS060R
CS053R, CS054R
CS057R, CS058R, CS070R
CS062R
CS063R
CS064R, CS065R
CS066R
CS068R, CS069R
CS150R, CS151R
OME SPRING PART NUMBER
FRONT SPRINGS
40 SERIES - OME13, OME131
60 SERIES - OME110, OME11, OME111
75 SERIES - OME67, OME671
HILUX - OME99A
HILUX - OME99B
HILUX - OME91A
HILUX - OME91B
PATROL M60 - OME3A, OME31A
PATROL M60 - OME3B, OME31B
SUZUKI SIERRA - OMES1A
SUZUKI SIERRA - OMES1B
JEEP YJ - OMEJ1F
REAR SPRINGS
40 SERIES - OME14, OME141
45 SERIES - OME201
60 SERIES - OME113A, OME1131A
60 SERIES - OME113B, OME1131B
75 SERIES - OME39, OME391, OME3911, OME39111
HILUX - OME17, OME171, OME1711
PATROL M60 - OME4, OME41
78/79 SERIES - OME49, OME491, OME492, OME493
Y60, Y61 CAB CHASSIS - OME61A
OME61A, OME611A
PATROL Y60
PATROL Y60, Y61 CAB CHASSIS - OME61B, OME611B
HJ60 - OME221A
HJ60 - OME221B
HILUX - OME180, OME18, OME181, OME1811
TRITON / PAJERO - OME22, OME222
ISUZU / RODEO 2003 - OMEROD4, OMEROD5
MAZDA / FORD UTE - OME26, OME261
ISUZU / RODEO - OMEROD1, OMEROD11, OMEROD111
NAVARA D21, D22 - OMENN1, OMENN11, OMENN2
JEEP XJ - 75mm
JEEP XJ - 75mm
JEEP XJ - OMEJC1A, OMEJC2A
JEEP XJ - OMEJC1B, OMEJC2B
JEEP YJ - OMEJ1R, OMEJ2R
SUZUKI SIERRA - OMES2, OMES21
HILUX 2005ON
RANGER / BT-50 12/2006 TO 2011
TRITON ML & MN 2006 ON
76 SERIES
COLORADO, DMAX 2008 ON, RODEO 2003 ON
COLORADO, DMAX 2008 ON, RODEO 2003 ON
AMAROK 2010 ON
78/79 SERIES
RANGER / BT-50 2011 ON
NAVARA D40
Page 113
MAIN LEAF
PART NUMBER
SECOND LEAF
PART NUMBER
SL1F/1
SL3F/1
SL6F/1
SL8FA/1
SL8FB/1
SL9FA/1
SL9FB/1
SL10FA/1
SL10FB/1
SL12FA/1
SL12FB/1
SL14F/1
SL1F/2
SL3F/2
SL6F/2
SL8FA/2
SL8FB/2
SL9FA/2
SL9FB/2
SL10FA/2
SL10FB/2
SL12FA/2
SL12FB/2
SL14F/2
SL1R/1
SL3R/1
SL4RA/1
SL4RB/1
SL6R/1
SL9R/1
SL11R/1
SL13R/1
SL16RA/1
SL16RB/1
SL17RA/1
SL17RB/1
SL18R/1
SL22R/1
SL24R/1
SL26R/1
SL28R/1
SL30R/1
SL33RA/1
SL33RB/1
SL34RA/1
SL34RB/1
SL36R/1
SL38R/1
SL43R/1
SL49R/1
SL22R/1
SL57R/1
SL62R/1
SL62R/1
SL64R/1
SL13R/1
SL49R/1
SL150R/1
SL1R/2
SL3R/2
SL4RA/2
SL4RB/2
SL6R/2
SL9R/2
SL11R/2
SL13R/2
SL16RA/2
SL16RB/2
SL17RA/2
SL17RB/2
SL18R/2
SL22R/2
SL24R/2
SL26R/2
SL28R/2
SL30R/2
SL33RA/2
SL33RB/2
SL34RA/2
SL34RB/2
SL36R/2
SL38R/2
SL43R/2
SL49R/2
SL53R/2
SL57R/2
SL62R/2
SL63R/2
SL64R/2
SL66R/2
SL49R/2
D31XL
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - LEAF SPRINGS
REPLACEMENT CENTRE BOLTS
Dimension Details
Centre Bolt Head
Part No. Diameter
A
UCB1
17
UCB2
15
UCB3
14
UCB4
14
UCB5
14
UCB6
14
UCB7
14
UCB8
12
UCB09
13
UCB10
14
UCB11
17
UCB12
11
UCB13
14
UCB14
14
UCB15
11.5
UCB16
11
UCB17
14
UCB18
16
UCB19
14
UCB20
16
Head
Depth
B
10
15
11
8
8
8
5
9
10
8
10
8
6
6
9
8
8
8
8
8
Shank
Length
C
90
90
70
110
70
80
55
75
55
120
115
70
70
80
72
80
90
50
95
62
Shank
Diameter
D
9.5
9.5
9.5
9.5
9.5
7.9
7.9
7.9
7.9
9.5
9.5
7.9
9.5
9.5
7.9
7.9
9.5
10
10
10
Thread
Length
E
50
50
50
50
50
50
35
50
40
40
40
40
40
40
30
40
50
30
45
45
Spring Part No.
Thread
3/8 UNF
3/8 UNF
3/8 UNF
3/8 UNF
3/8 UNF
5/16 UNF
5/16 UNF
5/16 UNF
5/16 UNF
3/8 UNF
3/8 UNF
5/16 UNF
3/8 UNF
3/8 UNF
5/16 UNF
5/16 UNF
3/8 UNF
M10
M10
M10
CS011R, 12R
CS017RA/B
CS003F, 04F, 05F
CS03R, 04R, 05R, 06R, 07R
CS006, 07F, 10F, 11F, 22R, 23R, 40R, 41R, 42R, 53R, 54R
CS009R, 10R, 18R, 19R, 20R, 21R
CS008F, 09F, 12F, 13F, 38R, 39R
CS001F, 02F, 01R, 02R, 33R, 34R, 35R
CS014F, 36R, 37R
CS008R, 48R
CS016R
CS028R
CS030R, 31R, 32R
CS043R, 43R-15, 44R, 45R, 46R
CS024R, 25R, 062R, 063R
CS029R
CS013R, 14R, 15R, 26R, 27R, 47R, 57R, 58R, 64R, 65R
CS015F, 018F
CS018R, 49R, 50R, 51R, 56R, 150R, 151R
CS018F
DAKAR SPRING SERVICE PARTS
SPRING EYE SLEEVES
ID
OD
PART NUMBER
(MM)
(MM)
CBH154028
15
40
CBH27532569
27.5
32.5
CBH303549
30
35
CBH303559
30
35
CBH31536559
31.5
36.5
CBH31536569
31.5
36.5
CBH32737759
32.7
37.7
CBH354069
35
40
CBH37542559
37.5
42.5
CBH39544559
39.5
44.5
CBH404549
40
45
CBH404559
40
45
CBH404569
40
45
LENGTH
(MM)
28
69
49
59
59
69
59
69
59
59
49
59
69
SPRING CLIPS
LEAF
CLIP
PART NUMBER
WIDTH
WIDTH
(MM)
(MM)
2512074
70
25
2516474
70
25
CLIP
LENGTH
(MM)
120
164
BONDED RUBBER BUSHES
ID
OD
PART NUMBER
(MM)
(MM)
CBH14405970
14
40
CBH14406073
14
40
CBH145357889
14.5
35
CBH148517689
14.8
51
CBH16455689
16
45
CBH185396489
18.5
39
CBH18544489
18
54
LENGTH
(MM)
59/70
60/73
78/89
76/89
56/89
64/89
44/89
LEAF LINER KITS
PART NUMBER
DESCRIPTION
IL01YE (Round)
Inter Leaf Liners x 6 Pieces
SLK60 (60mm Wide)
Noise - Service Liners x 4 Pieces
SLK70 (70mm Wide)
Noise - Service Liners x 4 Pieces
RIVETS
PART NUMBER
3822
3824
Page 114
SIZE
3/8
3/8
LENGTH
(MM)
22
24
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - LEAF SPRINGS
U BOLTS
OE spring stack height must be compared to OME spring before final
U Bolt selection as OE spring stack heights may vary from model to model.
PART NO.
OMEU51
OMEU52
OMEU53
OMEU53A
OMEU53B
OMEU54
OMEU55
OMEU56
OMEU57
OMEU58
OMEU58B
OMEU59A
OMEU59B
OMEU59C
OMEU59D
OMEU60
OMEU61
OMEU61B
OMEU62
OMEU63
OMEU64
OMEU65
OMEU66
OMEU66A
OMEU66B
OMEU67
OMEU68
OMEU69
OMEU69A
OMEU70
OMEU70A
OMEU71
OMEU72
OMEU73
OMEU76
A
LEG
LENGTH
mm
210
200
168
185
200
175
218
100
190
210
242
197
225
240
197
150
147
160
145
190
260
215
190
210
230
350
275
235
260
205
230
150
200
125
170
B
LEG
CENTRE
mm
85
76
75
75
75
85
97
75
88
110
110
97
97
97
97
81
87
87
73
74
125
97
103
103
102
107
107
95
95
95
95
82
97
91
84
C
THREAD
DIA
mm
14
14
14
14
14
12
14
12
12
14
14
14
14
14
14
11
10
10
10
12
14
14
14
14
14
16
16
14
14
14
14
12
14
10
12
D
THREAD
LENGTH
mm
70
75
70
65
70
70
70
50
70
75
75
75
75
75
90
70
60
70
70
50
90
75
60
60
60
75
75
65
65
55
55
60
90
40
50
Page 115
THREAD
PITCH
E
TOP
TYPE
1.5
1.5
1.5
1.5
1.5
1.25
1.5
1.25
1.25
1.5
1.5
1.5
1.5
1.5
1.5
1.27
1.25
1.25
1.25
1.25
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
1.5
1.5
1.25
1.5
SQUARE
FLAT
SQUARE
SQUARE
SQUARE
ROUND
SQUARE
SQUARE
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
SQUARE
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
SQUARE
SQUARE
SQUARE
ROUND
ROUND
SQUARE
REC.
TORQUE
Lbs.ft.
93
93
93
93
93
58
93
58
58
93
93
93
93
93
93
45
34
34
34
58
93
93
93
93
93
145
145
93
93
93
93
58
93
93
93
REC.
TORQUE
Nm
126
126
126
126
126
79
126
79
79
126
126
126
126
126
126
61
45
45
45
79
126
126
126
126
126
197
197
126
126
126
126
79
126
126
126
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - LEAF SPRINGS
LEAF SPRING TRIM PACKERS
(Mild Steel 5mm Thick)
PART No.
WIDTH
LENGTH
TP01
TP02
TP03
TP04
TP05
70mm
70mm
60mm
60mm
50mm
140mm
140mm
140mm
140mm
120mm
HOLE DIA. APPLICATIONS
10.3mm TOYOTA 60, 75, NISSAN GQ / FORD MAVERICK CAB CHASSIS & NISSAN GQ UTE
TOYOTA 40, 42, 45, 47
8.7mm
10.3mm NISSAN MQ, MITSUBISHI PAJERO, TRITON, L200
TOYOTA HILUX, 4RUNNER
8.7mm
SUZUKI SIERRA, HOLDEN DROVER
8.7mm
To be used to correct left to right trim problems. Maximum 2 plates (10mm). Order centre bolt separately.
Refer Manual for Instructions.
CLIP LINER KITS FOR LEAF SPRINGS
Kit Part No.
Contents: Clip Liner Size & Quantity
To Suit OME
To Suit Dakar
CLK11
CLK113A
CLK113B
CLK13
CLK14
CLK17
CLK18
CLK201
CLK22
CLK221
CLK3
CLK39
CLK4
CLK57
CLK6
CLK9
CLKJ1
CLKJ2
CLKNN
CLKROD
CLK13D
CLK15D
CLK26D
CLK33D
CLK38D
CLK40D
CLK43D
CLK48D
CLK55D
CLK57D
CLK58D
20mm X 4
30mm X 4, 90mm X 2
30mm X 4, 80mm X 2
40mm X 4
30mm X 4, 60mm X 2
35mm X 4, 70mm X 2
30mm X 4, 90mm X 2
40mm X 4, 80mm X 2
35mm X 4, 40mm X 2
20mm X 4, 40mm X 2
30mm X 4
50mm X 4,
4 80mm X 2
40mm X 4
30mm X 4, 35mm X 2
45mm X 4, 95mm X 2
35mm X 2, 30mm X 2
25mm X 4
30mm X 4, 80mm X 2
80mm X 2
30mm X 4, 70mm X 2
35mm X 4
55mm X 4, 150mm X 2
45mm X 2, 95mm X 2
40mm X 4, 85mm X 2
20mm X 4, 65mm X 2
60mm X 2
35mm X 2, 45mm X 4, 85mm X 2
47mm X 2
40mm X 2, 50mm X 2
35mm X 2, 120mm X 2
45mm X 2, 115mm X 2
OME110, 11, 111, J1F
OME113A, 1131A
OME113B, 1131B
OME13, 131
OME14, 141
OME17, 171
OME18, 181, 1811
OME201
OME22, 222
OME221A/B
OME3A/B, 31A/B, JC1A/B
OME39 391
OME39,
391, 3911
3911, 39111
OME4, 41
OME67, 671
OME6A/B, 61A/B, 611A/B
OME91A/B, 99A/B
OMEJ1R
OMEJC2A/B
OMENN1, NN11, NN2
OMEROD1, ROD11, ROD4, ROD5
CS003F, 4F, 5F
CS004RA, 5RA
CS004RB, 5RB
CS001F, 2F
CS001R, 2R
CS009R, 10R, 28R, 29R, 53R, 54R
CS018R, 19R, 20R
CS003R
CS022R, 23R
CS017RA/B
CS010FA/B, 11FA/B, 34RA/B
CS006R 7R,
CS006R,
7R 8R,
8R 68R
CS011R, 12R, 49R, 56R, 61R
CS006F, 7F
CS016RA/B, 42R, 46RA/B, 47R
CS008FA/B, 9FA/B
CS036R
CS035RA/B
CS030R, 31R, 32R
CS024R, 25R, 62R, 63R
CS013FA/B, 14F
CS013R, 14R, 15R, 60R, 66R, 69R
CS026R, 27R
CS033RA/B, 150R, 151R
CS038R, 39R
CS040R, 41R
CS043R, 44R, 45R, 71R
CS048R
CS055R
CS057R
CS058R, 70R
OME26, 261
INTER-LEAF LINER KIT FOR LEAF SPRINGS
IL01YE
SLK60
SLK70
6 LINERS PER KIT
4 LEAF SLEEVES TO SUIT 60MM WIDTH
4 LEAF SLEEVES TO SUIT 70MM WIDTH
LEAF SPRING CENTRE BOLT SLEEVES
Part No.
CBS01
CBS02
Length mm
15
10
OD mm
25
19
ID mm
15
16.8
Application
LandCruiser 60 series rear
GQ Patrol cab chassis front
Page 116
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - LEAF SPRINGS
LEAF SPRINGS
Dakar Part No.
CS001F
CS001R
CS002F
CS002R
CS003F
CS003R
CS004F
CS004RA
CS004RB
CS005F
CS005RA
CS005RB
CS006F
CS006R
CS007F
CS007R
CS008FA
CS008FB
CS008R
CS009FA
CS009FB
CS009R
CS010FA
CS010FB
CS010R
CS011FA
CS011FB
CS011R
CS012FA
CS012FB
CS012R
CS013FA
CS013FB
CS013R
CS014F
+CS014R
+CS015R
CS016F
CS016RA
CS016RB
CS017RA
CS017RB
CS018F
*CS018R
CS019R
CS020R
CS021R
CS022R
+CS023R
CS026R
OME Part No.
OME13
OME14
OME131
OME141
OME110
OME201
OME11
OME113A
OME113B
OME111
OME1131A
OME1131B
OME67
OME391
OME671
OME3911
OME99A
OME99B
OME39111
OME91A
OME91B
OME17
OME3A
OME3B
OME171
OME31A
OME31B
OME4
OMES1A
OMES1B
OME41
N/A
N/A
OME491
OMEJ1F
+OME492
+OME493
N/A
OME611A
OME611B
OME221A
OME221B
N/A
*OME180
OME18
OME181
OME1811
OME22
+OME222
OME26
Stack
Height
(mm)
48.0
43.0
54.0
49.0
30.0
81.0
36.0
58.0
58.0
42.0
64.0
64.0
43.0
82.0
49.0
89.0
32.5
32.5
96.0
39.0
39.0
48
48.00
43.0
43.0
54.5
49.0
49.0
56.0
24.4
24.4
63.0
30.0
30.0
68.0
26.0
68.0
76.0
56.0
82.0
82.0
48.0
48.0
58.0
52.5
52.5
59.0
65.5
41.0
58.0
59.0
No. of
Leaves
8
5+1
9
6+1
5
6+3
6
6+2
6+2
7
7+2
7+2
7
7+3
8
8+3
5
5
9+3
6
6
4+2
7
7
5+2
8
8
8
4
4
9
5
5
5+2
4
5+2
6+2
8
7+3
7+3
8
8
7
3+3
3+3
4+3
5+3
5+1
6+2
4+3
Eye Dia. mm
Front
Rear
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
30 0
32.5
32.5
30.0
32.5
32.5
32.5
30.0
30.0
32.5
30.0
30.0
40.0
31.4
40.0
40.0
32.7
40.0
40.0
35.0
35.0
51.5
39.0
39.0
39.5
39.0
31.5
31.5
32.7
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
30 0
32.5
32.5
30.0
32.5
32.5
32.5
40.0
40.0
32.5
40.0
40.0
40.0
37.6
40.0
40.0
40.0
40.0
40.0
35.0
35.0
41.5
30.0
30.0
30.0
30.0
27.5
27.5
32.7
* These springs have a 20mm lower 2nd Stage than other springs in the series.
+ These springs have a 20mm higher 2nd stage than other springs in this series
Page 117
Weight
(kg)
23.0
21.5
27.0
25.6
15.5
45.4
17.7
31.6
31.6
21.5
36.0
36.0
21.6
46.8
25.5
52.2
14.8
14.8
59.5
18.4
18.4
20.0
20 0
18.9
18.9
24.2
22.3
22.3
26.8
8.1
8.1
30.2
10.4
10.4
47.9
11.0
47.9
51.5
27.0
50.8
50.8
25.5
25.5
37.7
25.0
27.3
30.6
31.0
22.0
29.5
26.3
Primary
Free
Camber mm
165
225
165
225
200
235
196
250
230
196
250
230
220
240
220
240
170
150
240
170
150
230
215
200
230
215
200
275
125
110
275
125
110
268
210
268
268
229
250
235
250
230
202
215
235
235
235
195
195
164
Spring Rate
lbf / in
350
300 / 450
398
357 / 496
220
510 / 710
257
268 / 570
268 / 570
305
314 / 617
314 / 617
302
388 / 610
348
455 / 600
208
208
500 / 656
254
254
217 / 388
283
283
285 / 445
343
343
211
207
207
240
247
247
279 / 548
148
279 / 548
325 / 680
337
325 / 585
325 / 585
255
255
431
125 / 485
125 / 485
160 / 540
274 / 571
194 / 388
230 / 570
177 / 616
N / mm
61.3
52.5 / 79
69.8
62.5 / 87
38.5
90 / 125
45
47.0 / 100
47.0 / 100
53.5
55 / 108
55 / 108
53
68 / 107
61
80 / 105
36.5
36.5
88 / 115
44.5
44.5
38.0
38 0 / 68.0
68 0
49.6
49.6
50.0 / 78.0
60
60
37
36.3
36.3
42
27.9
27.9
52 / 96
26
52 / 96
57 / 119
59
57 / 103
57 / 103
44.7
44.7
75.5
22 / 85
22 / 85
28 / 95
48 / 100
34.0 / 68.0
41 / 100
31 / 108
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - LEAF SPRINGS
LEAF SPRINGS
Dakar Part No.
OME Part No.
Stack
Height
(mm)
CS027R
CS028R
+CS029R
CS030R
CS031R
*CS032R
CS034RA
CS034RB
CS035RA
CS035RB
CS036R
CS037R
CS038R
CS039R
CS040R
CS041R
CS042R
CS043R
CS043R-15
CS044R
+CS045R
CS046RA
CS046RB
CS047R
CS048R
CS049R
CS051R / CS151R
CS053R
CS054R
CS055R
CS056R
CS057R
CS058R
CS059R
CS060R
CS061R
CS062R
CS063R
CS064R
CS065R
CS066R
CS068R
CS069R
CS070R
CS071R
CS150R
EL072R
EL073R
EL074R
OME261
OMEROD11
+OMEROD111
OMENN1
OMENN11
*OMENN2
OMEJC1A
OMEJC1B
OMEJC2A
OMEJC2B
OMEJ1R
OMEJ2R
OMES2
OMES21
OME19
OME191
OME36
N/A
N/A
N/A
N/A
OME15A
OME15B
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
65.5
48.0
60.5
52.5
59.0
52.5
32.5
32.5
37.0
37.0
32.5
32.5
36.0
42.0
29.0
35.0
45.0
50.0
50.0
50.0
57.0
52 0
52.0
52.0
57.0
50.0
45.0
67.0
35.0
41.0
65.0
37.0
59.0
66.0
55.0
70.0
58.0
60.0
64.0
58.0
69.0
92.0
66.0
80.0
83.0
64.0
59.0
53.0
61.0
69.0
No. of
Leaves
5+3
4+2
4+3
3+3
4+3
3+3
5
5
4+1
4+1
5
5
3+2
4+2
3+1
4+1
4+1
4+2
4+2
4+2
5+2
5+2
5+2
5+2
3+2
4+1
5+2
4+1
5+1
4+2
3+1
4+2
5+2
4+1
5+2
4+2
5+2
5+2
4+2
5+2
8+2
5+2
6+2
7+2
6+2
4+2
3+2
4+2
5+2
Eye Dia. mm
Front
Rear
32.7
39.0
39.0
40.0
40.0
40.0
62.0
62.0
62.0
62.0
37.6
37.0
40.0
40.0
31.5
31.5
46.8
40.0
40.0
40.0
40.0
40.5
40 5
40.5
40.0
40.0
40.0
40.0
31.5
30.0
40.0
40.0
40.0
40.0
51.0
40.0
40.0
39.0
39.0
60.0
60.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
32.7
30.0
30.0
32.5
32.5
32.5
43.5
43.5
43.5
43.5
31.4
31.0
30.0
30.0
27.5
27.5
31.0
30.0
30.0
30.0
30.0
30.0
30 0
30.0
40.0
40.0
32.7
33.4
27.5
27.5
40.0
32.7
40.0
40.0
43.0
32.7
32.7
30.0
30.0
46.0
46.0
40.0
32.7
32.7
40.0
30.0
33.4
30.0
30.0
30.0
Weight
(kg)
30.1
22.5
25.4
22.1
25.5
22.1
18.2
18.2
20.9
20.9
13.7
13.8
9.8
12.3
16.4
16.4
28.0
24.0
24.0
24.0
27.5
26.7
26 7
26.7
32.4
32.5
25.0
36.3
20.3
24.3
36.5
20.0
36.6
42.8
22.9
33.1
24.9
26.0
28.0
39.2
48.2
59.6
33.1
37.0
50.0
31.1
30.9
27.8
32.7
37.5
Primary
Free
Camber mm
164
250
250
170
170
170
230
205
235
210
205
185
175
175
211
211
210
194
179
204
204
222
209
207
275
173
177
193
193
190
173
225
260
265
138
208
223
226
266
266
266
163
148
253
199
177
197
201
200
Spring Rate
lbf / in
217 / 662
170 / 457
216 / 616
126 / 531
165 / 571
126 / 411
148
148
137 / 257
137 / 257
188
188
171 / 291
228 / 348
148 / 245
200 / 296
228 / 310
170 / 340
170 / 340
170 / 340
204 / 361
114 / 194
114 / 194
182 / 392
225 / 416
212 / 450
244 / 535
166 / 321
209 / 365
205 / 330
147 / 371
234 / 627
300 / 694
242 / 338
277 / 608
186 / 352
215 / 459
294 / 610
169 / 445
267 / 582
412 / 679
277 / 608
338 / 707
408 / 684
258 / 434
192 / 481
193 / 432
250 / 515
307 / 544
N / mm
38 / 116
30 / 80
38 / 108
22 / 93
29 / 100
22 / 72
26
26
24 / 45
24 / 45
33
33
30 / 51
40 / 61
26 / 43
35 / 52
40 / 55
30 / 60
30 / 60
30 / 60
35.8 / 63.8
20 / 34
20 / 34
32 / 69
39 / 73
37 / 79
43 / 94
29 / 56
37 / 64
36 / 58
26 / 65
41 / 110
53 / 122
43 / 59
49 / 107
32.7 / 61.7
38 / 80
52 / 107
30 / 78
47 / 102
72 / 119
49 / 107
59 / 124
71 / 120
42 / 76
34 / 84
34 / 76
44 / 90
54 / 101
Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow 3mm tolerance either side.
* These springs have a 20mm lower 2nd Stage than other springs in the series.
+ These springs have a 20mm higher 2nd stage than other springs in this series
Page 118
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - COIL SPRINGS
COIL SPRINGS
Spring Number
2105
2106
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2516
2517
2518
2519
2520
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2538
2539
2540
2601
2602
2603
2604
2605
2606
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
19
21
17
17
18
19
19
19.5
18
18
19
19
19
19.5
14.5
15
16
15
14.5
15
15
15
15
17
15
13.5
17.5
14.5
16
16
14.5
15.5
15
16
15
15
14.5
19
16
14.5
16
14
12
16
17
14
17
17
13.5
16
18
16
17
17
18
18
Free Height mm
A
B
475
485
460
470
460
445
485
470
510
495
510
495
535
520
560
545
505
515
530
540
555
565
480
490
505
515
530
540
385
385
350
350
350
350
342
342
355
355
330
330
330
330
338
338
315
315
360
360
360
360
345
345
305
305
345
345
270
270
280
280
325
325
355
355
360
360
300
300
255
255
340
340
385
385
385
385
310
310
375
375
335
335
315
315
310
310
450
450
360
360
370
370
265
260
265
260
345
345
300
300
350
350
392
392
410
410
400
400
315
315
320
320
Number
Of Turns
9.0
8.3
8.0
8.0
9.5
7.7
7.7
8.3
9.0
9.0
10.75
7.7
7.7
8.3
5.4
7.3
6.0
7.0
5.4
7.3
5.1
5.1
5.6
5.4
7.15
6.6
6.25
6.63
4.7
4.7
8.6
5.7
6.6
8.0
5.7
5.75
6.25
5.0
5.5
7.51
7.25
6.5
7.75
11.0
7.4
7.5
6.5
6.5
5.9
7.0
8.35
8.22
7.0
6.0
7.75
7 75
7.75
Page 119
Coil weight
(kg)
8.5
11.3
6.1
6.1
8.3
8.5
8.5
9.9
7.5
7.5
10.0
8.5
8.5
9.9
3.4
4.3
4.3
4.1
3.4
4.3
3.4
3.5
3.6
4.7
4.1
2.8
4.1
3.3
3.5
3.5
3.4
4.1
3.9
4.1
2.8
3.8
3.5
6.5
3.5
3.6
4.2
3.0
2.4
5.3
5.1
3.3
3.9
3.9
2.7
3.7
5.5
5.6
6.4
5.5
5.1
51
5.1
Spring Rate
lbf / in
N / mm
350
61
400 / 440
70 / 77
250
44
250
44
250
44
290
51
290
51
290
51
300
52
300
52
300
52
280
49
280
49
280
49
155
27
175
31
245
43
185
32
155
27
175
31
180
32
180
32
180
32
250
44
180
32
190
33
500
88
250
44
260
46
260
46
340
60
190
33
180
32
500
88
200
35
215
38
190
33
240
42
310
54
230
40
350
61
230
40
140
25
355
62
330
58
200
35
650
114
650
114
180
32
420
74
650
114
180
32
188
33
227
38
730
128
730
128
OE Spring
Rate Lbs
160
170
200
200
200
180
180
180
160
160
160
170
170
170
130
130
130
130
130
130
130
160
160
200
140
160
420
200
200
200
280
140
150
440
160
160
150
180
260
180
300
190
100
260
280
160
450
450
150
350
540
150
140
140
680
680
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - COIL SPRINGS
COIL SPRINGS
Spring Number
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2640
2641
2642
2643
2700
2701
2702
2703
2704
2705
2720
2721
2722
2723
2724
2725
2730
2731
2743
2744
2745
2746
2751
2752
2754
2755
2760
2761
2762
2763
2764
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
16.5
16.5
19
20
18
20
20
20
13
14
15
16
14
15
14
14.5
15
15
17
13
14
14
14
15
17
17.55
17.5
18
14
14.5
18
19
18.5
19
18
19
18.5
18.5
19
20
21
22
15.5
15.5
21
18
19
20
15
17
20
18
15
15
17.5
18
16
Free Height mm
A
B
370
370
380
380
440
440
430
430
310
310
415
415
435
435
425
425
510
510
490
490
430
430
435
435
515
515
450
450
520
520
375
375
375
375
365
365
345
345
500
500
475
475
505
505
505
505
405
405
375
375
305
305
310
310
540
540
460
460
420
420
425
425
430
430
435
435
410
410
415
415
420
410
440
430
440
430
450
440
445
435
445
435
315
315
300
300
360
360
400
400
390
390
370
370
390
380
440
440
435
435
435
435
395
385
400
390
420
410
420
410
430
420
Number
Of Turns
9.5
9.5
8.0
8.0
7.75
10.99
10.99
10.99
10.0
10.5
7.0
7.75
10.5
9.0
9.55
7.0
6.1
6.1
8.5
10.0
10.5
10.5
9.55
7.0
9.9
99
7.4
7.4
10.5
9.0
8.75
9.48
9.48
9.48
8.8
9.5
8.42
8.42
7.2
7.2
7.2
7.71
5.4
5.0
8.6
9.7
9.7
8.6
6.57
9.0
6.9
6.8
9.0
7.5
8.6
7.8
8.0
Page 120
Coil weight
(kg)
5.3
5.3
7.8
8.7
5.1
8.9
8.9
8.9
3.7
4.6
4.1
5.3
4.6
4.5
4.1
3.6
3.8
3.8
4.8
3.7
4.6
4.6
4.1
4.1
5.9
59
4.5
4.8
4.6
4.2
5.7
6.9
6.6
6.9
6.6
6.9
8.8
8.8
8.0
8.9
9.8
11.6
3.5
3.1
8.7
6.5
7.2
7.9
3.9
7.7
8.3
6.5
5.2
4.4
7.0
6.7
5.4
Spring Rate
lbf / in
N / mm
480
84
480
84
390
68
460
81
730
128
740
130
740
130
740
130
120
21
135
24
160
28
175
31
135
24
200
35
150
26
210
37
200
35
200
35
540
95
120
21
135
24
135
24
150
26
160
28
580
102
730
128
790
139
135
24
175
31
625
109
720
126
625
109
720
126
625
109
720
126
270 / 350
47 / 61
270 / 350
47 / 61
275
48
340
59
400
70
440
77
240
42
280
49
800
140
530
93
670
117
680
119
225
39
175 / 200
31 / 35
420
74
300
52
180 / 250
32 / 44
200
35
300 / 340
52 / 60
360
63
220
39
OE Spring
Rate Lbs
450
450
330
330
680
680
680
680
120
120
100
100
120
120
120
160
160
160
460
120
120
120
120
100
88
670
670
120
100
500
500
500
500
500
500
170
170
170
170
170
170
200
200
600
480
480
600
200
200
240
240
160
160
170
200
200
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - COIL SPRINGS
COIL SPRINGS
Spring Number
2765
2766
2767
2768
2770
2776
2777
2779
2780
2781
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2802
2803
2838
2850
2850J
2851
2853
2856
2859
2860
2861
2862
2863
2863J
2864
2865
2866
2868
2869
2870
2871
2872
2873
2874
2875
2876
2880
2881
2882
2883
2884
2885
2886
2887
2888
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
22
16
16
20
16
14
14.5
15.5
18.5
17
16
17
16
14
15
16
16
16
13
13
16
16
16
18
16
16.55
17
16
16.5
16
16
17
16
17
18
18.5
19
17
18
20
16.5
14
16
14
16
15
17
14
16
16
16.5
16.5
16.5
16.5
17.5
16.5
16.5
Free Height mm
A
B
410
410
420
420
385
375
560
560
480
470
410
390
395
375
385
375
470
460
425
415
280
280
378
378
280
280
435
435
350
350
260
255
285
285
255
250
350
350
400
400
353
353
445
445
465
465
420
410
495
505
515
525
475
485
485
485
465
465
470
470
480
490
480
490
460
470
480
490
505
515
480
490
460
460
465
465
480
490
380
380
370
355
410
400
400
400
455
455
408
408
440
440
390
375
365
365
375
375
395
395
375
375
390
390
395
395
402
402
400
400
405
405
Number
Of Turns
8.0
7.52
6.66
11.0
10.0
7.0
7.24
7.29
8.68
7.7
7.25
9.35
7.25
9.3
5.2
7.25
6.0
7.25
10.0
10.2
5.5
11.31
10.7
7.5
9.0
90
9.9
8.18
10.13
10.0
9.25
6.88
10.4
9.0
7.0
7.7
7.2
6.88
9.0
7.15
9.8
8.5
7.25
9.0
8.25
9.0
8.3
8.5
10.2
10.2
11.1
9.75
9.75
9.75
10.6
9.75
9.75
Page 121
Coil weight
(kg)
11.7
5.0
4.5
10.3
6.5
3.6
4.0
4.6
9.0
5.9
3.9
5.2
3.9
4.1
3.7
4.2
4.0
4.2
2.7
3.2
4.5
5.9
5.5
7.7
6.2
62
7.3
5.3
6.2
5.3
5.3
6.0
6.8
7.8
6.9
9.2
7.8
6.0
8.8
8.8
4.7
3.6
4.9
3.9
5.6
4.5
6.4
3.6
4.7
4.7
5.3
4.7
4.7
4.7
5.9
4.7
4.7
Spring Rate
lbf / in
N / mm
540
95
250
44
285
50
450
79
260
45
160
28
180
32
225
39
250 / 340
43 / 59
290
51
410
72
500
87
410
72
155
27
165
29
420
73
360
63
420
73
340
59
210
36
200
35
320
56
340
59
205 / 290
36 / 51
220
38
220
38
220
38
275
48
230
40
275
48
220
38
220
38
240
42
250
43
265
46
320
56
220
38
240 / 300
42 / 52
360
63
590
103
220
38
220
38
190
33
200
35
220
38
240
42
200
35
500
87
500
87
500
87
590
103
590
103
590
103
660
115
590
103
590
103
OE Spring
Rate Lbs
240
220
200
220
160
150
150
150
160
160
380
400
380
130
120
330
330
330
300
180
150
205
205
160
160
160
160
160
210
210
170
160
160
170
170
170
170
170
170
500
160
160
160
160
160
170
160
490
490
490
500
500
500
590
500
500
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - COIL SPRINGS
COIL SPRINGS
Spring Number
2889
2890
2891
2892
2895
2895E
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2910
2911
2912
2913
2914
2915
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2947
2948
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
16.5
14.5
15.5
17
16.5
17
18
19
18
19
15
16
18
16
15
17
15
17
16
17
16
15
15
18
18
21
22
15
14
16
14
16
19
16
16
16
16
16
14
14
14
14
14
14
15
15
18
16
14
15
15.5
15
15
16
16
16
Free Height mm
A
B
400
400
440
430
425
415
400
390
390
390
375
375
390
390
390
390
400
400
400
400
405
395
395
385
340
340
380
380
410
410
313
313
390
380
370
370
295
295
400
390
400
390
420
420
390
390
330
330
345
345
345
335
338
328
430
430
430
430
385
385
360
360
395
395
340
340
385
385
392
392
394
394
410
410
420
420
475
465
510
500
480
470
495
485
510
500
420
410
420
410
400
400
400
390
525
515
380
370
390
375
380
365
370
360
395
385
350
340
340
340
340
340
Number
Of Turns
6.21
9.7
9.5
8.9
6.21
6.75
6.75
6.75
6.75
6.75
6.36
6.25
8.35
7.3
6.8
6.0
9.0
5.25
7.25
7.5
7.5
10.8
9.3
8.1
8.1
81
7.25
7.25
10.8
8.0
6.8
6.1
6.8
8.1
10.77
10.77
10.3
6.8
10.8
9.8
11.9
11.2
11.2
10.0
9.8
10.0
7.25
7.5
11.65
8.6
7.2
6.58
8.6
8.0
7.5
5.8
5.56
Page 122
Coil weight
(kg)
4.6
5.0
5.6
6.4
4.6
5.4
6.1
6.9
6.1
6.9
4.1
4.6
5.5
5.0
4.2
4.6
5.0
5.0
4.2
6.9
6.0
5.7
4.9
5.5
5.5
55
8.4
9.3
5.7
3.7
5.2
3.3
5.2
6.2
5.2
5.2
5.0
5.3
6.5
4.2
5.1
4.8
4.8
4.3
4.1
4.8
4.1
7.7
6.6
3.7
4.4
4.2
4.3
4.4
4.7
4.4
4.2
Spring Rate
lbf / in
N / mm
260
45
190
33
210
37
380
67
260
45
260
45
318
56
387
68
318
56
387
68
180
32
220
38
650
114
210
37
170
30
360
63
220
38
213
37
368
64
150 / 260
26 / 45
140 / 230
24 / 40
180 / 300
31 / 52
180 / 300
31 / 52
650
114
650
114
700 / 900
112 / 158
860 / 1000
151 / 175
200 / 280
35 / 49
190
33
200
35
140
25
200
35
790
138
375
66
375
66
400
70
200
35
240 / 300
42 / 53
162
28
140
25
140
25
140
25
160
28
180
32
220
39
220
39
205 / 290
36 / 51
220
39
190
33
140
25
160
28
230
40
190
33
240
42
170
30
200
35
OE Spring
Rate Lbs
150
150
150
150
150
150
150
150
150
150
140
140
560
160
140
300
160
160
300
160
160
160
160
580
580
650
650
160
160
150
120
150
580
320
320
320
150
180
140
140
140
140
140
140
170
170
160
170
140
140
140
150
165
170
150
150
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - COIL SPRINGS
COIL SPRINGS
Spring Number
2949
2950
2951
2952
2953
2954
2955
2956
2959
2960
2961
2962
2963
2965
2966
2967
2968
2969
2970
2971
2972
2972E
2973
2974
2974E
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3027
3028
3029
3030
3033
3034
3035
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
17
16
15
11
16
12
13
16
16
15
13
16
11.5
11.5
12
12
14
12
17
17
16
16
16
16
16
16
16
20
20.5
20.5
19
21
19
20
21
21
21
22
22.4
18
19
17
18
21
22
17.5
18
18
18.5
18.5
17
17
20
18
21
22
Free Height mm
A
B
370
355
300
300
290
290
345
345
285
285
340
340
350
350
330
330
310
310
300
300
340
340
320
320
350
350
365
365
335
315
325
325
370
370
360
360
395
385
405
395
400
385
404
404
415
400
385
370
385
385
425
410
440
425
370
370
370
370
375
375
490
470
480
460
470
450
480
455
480
455
480
460
500
500
500
500
500
500
370
370
365
365
355
345
345
335
335
325
350
340
370
355
360
360
365
365
365
365
325
325
430
420
440
430
435
425
430
420
505
485
505
485
Number
Of Turns
7.1
8.5
8.5
8.3
8.5
8.5
10.0
8.5
8.5
8.5
10.0
8.5
10.0
10.0
10.0
9.0
9.35
9.5
6.7
6.66
6.55
6.55
6.55
6.55
6.55
6 55
7.45
7.2
7.6
7.6
7.6
9.0
9.0
9.0
9.0
9.0
7.0
8.2
8.1
8.2
8.9
8.9
7.15
6.6
7.25
7.25
7.1
8.72
8.72
8.72
7.6
8.5
8.5
7.5
8.0
9.0
8.1
Page 123
Coil weight
(kg)
5.6
4.0
3.5
1.8
4.1
2.2
3.0
4.2
4.0
3.5
3.0
4.0
2.4
2.4
2.5
2.4
3.7
2.5
5.2
4.5
4.5
4.5
4.5
4.5
4.5
45
5.0
4.9
7.1
7.6
7.6
10.0
12.3
10.0
11.1
12.3
9.8
10.0
11.0
11.5
6.3
7.1
5.8
6.0
8.4
9.3
6.0
5.5
5.5
5.8
5.4
6.1
6.1
9.0
7.0
12.4
12.4
Spring Rate
lbf / in
N / mm
216
38
540
95
440
77
142
25
540
95
180
32
200
35
500
88
540
95
440
77
200
35
540
95
146
26
146
26
176
31
176
31
210
37
170
30
320
56
320
56
250
44
250
44
250
44
250
44
250
44
220
39
220
39
730
128
790
138.5
790
138.5
250
44
300
53
250
44
300 / 400
44 / 70
360 / 450
63 / 79
470
82
540
94.7
610
107
680
119
530
93
630
110
240
42
280
49
700 / 900
123 / 158
860 / 1000
151 / 175
250
44
800
140
800
140
840
140
800
140
330
58
330
58
270 / 330
47 / 58
320
56
300
52
470
82
OE Spring
Rate Lbs
160
420
420
120
420
140
140
420
440
410
150
440
120
120
120
120
120
150
160
160
160
160
160
160
160
160
160
650
650
650
200
200
200
200
200
200
380
380
380
440
440
190
190
600
600
200
700
700
700
680
250
250
190 / 280
N/A
N/A
N/A
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - COIL SPRINGS
COIL SPRINGS
Spring Number
3036
3037
3038
3039
3040
3043
3046
3047
3048
3049
3051
3052
3056
3057
3058
2GQ02A
2GQ02AM
2GQ02B
2GQ02C
2GQ02CM
2GQ02D
2GQ02G
2GQ02J
2GQ02LP
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
18
21
22
17
19
19
15.5
14.5
18
20
17
20
16.5
16.5
16.5
18
18
19
18
17
18
19
20
19
Free Height mm
A
B
455
445
530
510
530
510
520
530
505
515
530
540
490
490
545
545
350
350
505
515
545
555
530
540
360
360
365
365
370
370
465
465
505
490
445
445
480
465
485
470
480
480
475
460
480
465
475
445
Number
Of Turns
8.0
9.0
8.1
9.9
8.3
8.3
9.81
10.74
8.72
8.3
9.9
8.3
9.75
9.8
9.8
9.0
8.7
9.0
9.0
9.0
9.0
9.0
9.0
9.0
Coil weight
(kg)
7.0
12.4
12.4
7.3
9.2
9.2
5.4
5.2
5.5
10.3
7.3
10.3
4.7
4.7
4.7
9.0
8.7
10.0
9.0
7.9
9.0
10.0
11.1
10.0
Spring Rate
lbf / in
N / mm
320
56
300
52
470
82
220
38.5
250
44
250
44
200
35
150
26
800
140
320
56
220
38.5
320
56
590
103
590
103
590
103
200
35
220 / 240
39 / 42
250 / 280
44 / 49
200
35
170 / 190
30 / 33
200
35
220 / 350
39 / 61
280 / 310
49 / 54
250 / 280
44 / 49
OE Spring
Rate Lbs
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
580
580
580
180
180
180
180
180
180
180
180
180
X5K MICRO-ALLOYED SPRING STEEL is a new generation high strength spring steel grade
designed to withstand higher operating stresses with superior resistance to sag and
improved toughness and corrosion fatigue properties. These properties are enhanced by
additions of Silicon, Chromium, Vanadium Nickel along with lower Carbon than conventional
spring steel grades.
Page 124
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
NITROCHARGER SPORT
Part Number
Nitrocharger
Sport
60000
60001
60002
60003
60004
60005
60006
60007
60008
60009
60010
60011
60012
60013
60013L
60014
60015
60015L
60016
60017
60018
60019
60020
60021
60022
60023
60024
60024L
60025
60025L
60026
60027
60028
60029
60030
60031
60032
60033
60034
60035
60036
60037
60037L
60038
60039
60039L
60040
60041
60042
60043
60044
60045
60046
Note:
Open
Length
(mm)
Closed
Length
(mm)
Type
Replacement
Upper Mount
Bush Kit
Type
Replacement
Lower Mount
Bush Kit
443
443
612
612
580
580
600
597
524
589
652
657
496
496
555
657
657
716
376
559
617
582
625
325
363
624
587
627
587
627
593
545
545
615
615
385
597
581
311
560
559
553
593
560
560
600
345
478
352
660
640
642
565
298
298
368
368
356
356
373
373
319
349
403
403
301
301
322
403
403
426
262
350
359
354
378
215
239
380
368
388
368
388
368
338
338
368
368
250
365
354
208
345
339
329
349
346
346
366
225
304
232
397
390
382
334
P4203
P4203
P4204
P4204
P4184
P4184
E4005
E4005
P4184
P4169
E4005
E4005
P4184
P4184
P4184
E4005
E4005
E4005
E4051-S
E4001
P4184
P4158
P4184
P4169
P4205
E4005
E4005-S
E4005-S
E4005-S
E4005-S
E4005-S
P4169
P4169
P4204
P4204
P
E4001
P4158
P4205
E4001
E4001
P4184
P4184
E4005
E4005
E4005
P4169
P4169
P4169
E4005
E4005
E - TB
P4169
N/A
SMP493
SMP493
SMP493
N/A
SMP569
SMP649
SMP649
OMEB42
OMEB13
OMEB15
OMEB15
OMEB42
OMEB42
OMEB42
OMEB36
OMEB36
OMEB36
N/A
110-043-071
OMEB42
N/A
OMEB42
OMEB13
OMEB13
OMEB15
N/A
N/A
N/A
N/A
N/A
OMEB13
OMEB13
N/A
N/A
OMEB13
OMEB14
N/A
OMEB13
OMEB14
OMEB14
OMEB42
OMEB42
OMEB40
OMEB40
OMEB40
OMEB13
OMEB13
OMEB13
OMEB15
OMEB15
N/A
N/A
E4050-BS
E4050-BS
E4005
E4005
E4005
E4005
E4005
E4005
P4184
E4005
E4005
E4005
P4184
P4184
P4184
E4005
E4005
E4005
E4051-S
E4063-S
P4184
E4040-BS
E4005
E4026-S
E4050
E4005BS
E4005-T
E4005-T
E4005-BS
E4005-BS
E4005-BS
E4005
E4005
E4005
E4005
E4026-S
E4001
E4051-BS
E4026-S
E4001
E4001
P4184
P4184
P4184
P4184
P4184
E4026-S
E4001
E4005-S
E4005
E4005
E-S
E4026-TB
110-110-090
110-110-090
OMEB40
OMEB40
OMEB40
OMEB40
SMP649
SMP649
OMEB42
OMEB36
OMEB15
OMEB15
OMEB42
OMEB42
OMEB42
OMEB40
OMEB40
OMEB40
N/A
N/A
OMEB42
N/A
OMEB36
OMEB10
TBA
N/A
N/A
110-110-066
N/A
110-110-066
OMEB15
OMEB15
OMEB40
OMEB40
OMEB10
OMEB14
N/A
OMEB10
OMEB14
OMEB14
OMEB42
OMEB42
SMP683
SMP683
N/A
OMEB10
OMEB17
OMEB17
OMEB15
OMEB15
N/A
N/A
Dirt Shield
Part Number
384006170
384006170
384006250
384006250
384006250
384006250
384006250
384006250
384006210
384006250
384006290
384006290
384006210
384006210
384006250
384006290
384006290
384006290
384006250
384006290
384006250
384006250
OME412422
OME412422
384006250
384006250
384006250
384006250
384006250
384006250
384006210
384006210
384006250
384006250
OME412422
384006250
384006250
OME412422
384006250
384006250
384006250
384006250
384006250
346006250
346006250
OME412422
384006210
OME412422
384006290
384006250
384006250
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
Th last
The
l t 3 numbers
b off the
th Dirt
Di t Shield
Shi ld Part
P tN
Number
b iindicates
di t th
the llength
th off th
the di
dirtt shield.
hi ld
See page 132 for legend of mount types.
Page 125
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
NITROCHARGER SPORT
Part Number
Nitrocharger
Sport
60047
60047L
60048
60049
60049L
60050
60051
60052
60052L
60053
60053L
60054
60055
60056
60057
60058
60059
60060
60061
60062
60063
60064
60065
60066
60066L
60066M
60067
60067L
60068
60069
60070
60070L
60071
60071L
60072
60073
60074
60075
60076
60077
60078
60080
60081
60082
60083
60084
60085
60086
60087
60088
60089
60090
60091
Note:
Open
Length
(mm)
Closed
Length
(mm)
Type
Replacement
Upper Mount
Bush Kit
Type
Replacement
Lower Mount
Bush Kit
565
678
559
559
622
659
339
565
678
559
622
644
496
503
559
619
523
528
485
587
588
594
581
580
693
646
619
706
509
576
617
667
625
673
383
549
517
523
523
583
583
603
603
602
602
560
560
603
535
580
569
508
599
334
392
338
338
366
389
224
344
392
338
366
384
301
312
339
369
329
318
294
357
348
360
356
348
404
382
368
422
314
362
359
381
378
387
254
334
333
329
329
354
354
368
368
368
368
350
350
368
330
355
338
308
360
P4169
P4169
E4026-TB
E4026-TB
E4026-TB
E4001
P4169
P4169
P4169
E4026-T
E4026-TB
E4005
P4184
E4001
E4001
E4001
E4001
P4205
P4169
E4005
P4169
E4005
E4005
P4184
P4184
P4184
E-TB
E-TB
P4169
E4057-S
P4184
P4184
P4184
P4184
P4169
P4169
E4005-S
E4001
E4001
P4205
P4205
P4184
P4184
E
E
P
P
P4184
P4170
E4057-S
E-4032-S
E4005
P4205
N/A
N/A
N/A
N/A
N/A
OMEB14
OMEB13
N/A
N/A
110-110-089
N/A
OMEB36
OMEB42
OMEB14
OMEB14
OMEB14
OMEB14
OMEB13
OMEB13
OMEB15
OMEB13
OMEB15
OMEB15
OMEB42
OMEB42
OMEB42
N/A
N/A
OMEB13
N/A
OMEB42
OMEB42
OMEB42
OMEB42
OMEB13
OMEB13
OMEB17
OMEB14
OMEB14
OMEB13
OMEB13
SMP569
SMP569
N/A
N/A
N/A
N/A
SMP569
N/A
N/A
N/A
OMEB15
OMEB13
E4026-TB
E4026-TB
E4026-S
E4026-S
E4026-S
E4001
E4026-T
E4026-T
E4026-TB
E4026-S
E4026-S
P4169
P4184
E4005-S
E4001
E4001
E4005-S
E4050
E4026-S
E4005
E4005
E4005
E4005
E
E
E
E
E
E4005
E4005-S
P4184
P4184
E4005
E4005
E4005-S
E4005
E4005
E4005-S
E4005-S
E4005-S
E4005-S
E4005
E4005
E
E
E
E
E4005
E4026-T
E4001
P4169
P4169
E4026-S
N/A
N/A
N/A
N/A
N/A
OMEB14
110-034-078
110-110-088
N/A
OMEB10
OMEB10
OMEB13
OMEB42
OMEB17
OMEB14
OMEB14
OMEB17
OMEB15
OMEB10
OMEB15
OMEB36
OMEB15
OMEB15
N/A
N/A
N/A
N/A
N/A
OMEB15
N/A
OMEB42
OMEB42
OMEB36
OMEB36
OMEB17
OMEB36
OMEB15
OMEB17
OMEB17
OMEB15
OMEB15
OMEB40
OMEB40
N/A
N/A
N/A
N/A
OMEB40
N/A
OMEB10
OMEB13
OMEB13
N/A
Dirt Shield
Part Number
384006250
384006250
384006290
OME412422
384006250
384006290
384006210
384006210
384006250
384006250
384006210
384006250
384006210
384006250
384006250
384006250
384006250
384006250
384006290
384006290
384006210
384006250
384006290
384006290
384006250
384006290
141-032-028
384006250
384006210
384006210
384006210
384006250
384006250
384006250
384006250
384006250
384006250
384006250
384006250
384006210
384006250
384006250
384006210
384006250
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
Th last
The
l t 3 numbers
b off the
th Dirt
Di t Shield
Shi ld Part
P tN
Number
b iindicates
di t th
the llength
th off th
the di
dirtt shield.
hi ld
See page 132 for legend of mount types.
Page 126
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
NITROCHARGER SPORT
Part Number
Nitrocharger
Sport
60092
60093
60094
60095
60096
60097
60098
60099
60101
60102
60109
60110
60111
60112
60116
60117
61012
61014
61029
61030
90000
90001
90002
90003
90004
90005
90006
90007
90008
90009
90010
90011
90012
90013
90014
90015
90016
90017
90019
90020
90021
90022
90023
91005
Note:
Open
Length
(mm)
Closed
Length
(mm)
Type
Replacement
Upper Mount
Bush Kit
Type
Replacement
Lower Mount
Bush Kit
565
562
469
442
531
493
625
509
624
624
685
559
665
580
555
555
496
657
615
615
543
404
548
390
473
613
474
474
426
316
543
548
615
615
458
458
543
613
505
505
543
495
495
613
345
343
291
284
342
315
365
329
380
380
420
350
400
356
340
340
301
403
368
368
413
273
413
287
340
432
330
330
306
204
413
413
485
485
297
297
413
432
368
368
412
350
350
432
P14969
E4003
P4184
P4169
E4005
E4001
P4169
E4001
E4005
E4005
E4005
E4001
E4005
P4184
E4005
E40005
P4184
E4005
P4204
P4204
P
P
P
P
P
P4214
N/A
P
P
P
P
P
P
P
P
P
P
P4124
P
P
P
P
P
P4124
OMEB13
N/A
OMEB42
OMEB13
OMEB15
OMEB14
OMEB13
OMEB14
OMEB15
OMEB15
OMEB15
OMEB14
OMEB15
N/A
OMEB15
OMEB15
OMEB42
OMEB36
N/A
N/A
SMP671
N/A
SMP626
N/A
N/A
Use OE Bushes
N/A
N/A
N/A
N/A
N/A
SMP626
SMP698
SMP698
OE
OE
N/A
OE
OE
OE
SMP671
Use OE Bushes
Use OE Bushes
OE
E4026-T
E4026-S
P4184
E4005
E4005
E4001
E4026-S
E4026-S
E4005-BS
E4005-BS
E4005
E4063S
E4005
E4005
E4005
E4005
P4184
E4005
E4005
E4005
E4050-S
N/A
E4050-S
E4063-BS
E4050-B
E4066
E4055BS
E4055BS
E4055BS
N/A
E4050-S
E4050-S
N/A
N/A
E
E
E4050-S
E4066
E
E
E4050-S
N/A
N/A
E4066
N/A
OMEB10
OMEB42
OMEB15
OMEB15
OMEB14
OMEB10
OMEB10
N/A
N/A
OMEB15
N/A
OMEB15
OMEB40
OMEB15
OMEB15
OMEB42
OMEB40
OMEB40
OMEB40
110-110-060
110-110-100
110-110-060
110-110-112
110-110-060
N/A
N/A
110-110-075
N/A
N/A
110-110-112
110-110-060
N/A
N/A
N/A
N/A
110-110-112
N/A
N/A
N/A
110-110-060
N/A
N/A
N/A
Dirt Shield
Part Number
384006250
384006250
384006210
384006170
384006210
384006210
384006290
384006210
384006250
384006250
384006290
384006250
384006290
384006250
384006250
384006250
384006210
384006290
384006250
384006250
TBA
N/A
N/A
489-A03-003
489-A03-003
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
The last 3 numbers of the Dirt Shield Part Number indicates the length of the dirt shield.
See page 132 for legend of mount types.
Page 127
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
NITROCHARGERS
UPPER MOUNT BUSH KIT
Part Number
Open Closed
Length Length
Nitrocharger (mm) (mm)
Type
Original Kit
Bushes only
Replacement
LOWER MOUNT BUSH KIT
Type
Original Kit
Bushes only
Replacement
110-034-072
N/A
110-034-064
OMEB36
N15/N15C
517
327
E4005-S
E4005
SMP374
OMEB42
SMP487
110034078
N16
477
352
P4184
E4078-T
SMP488
11003478
110-034-074
N/A
N17
632
382
E4026-T
E4026-S
SMP474
OMEB13
110-034-056
OMEB10
N18
340
225
P4169
E4026-S
SMP345
OMEB42
SMP345
OMEB42
N19/N19C
492
292
P4184
P4184
SMP345
OMEB42
SMP345
OMEB42
N21
492
292
P4184
P4184
SMP363
OMEB36
SMP363
OMEB40
N22F
656
396
E4005
E4005
SMP345
OMEB42
SMP345
OMEB42
N23F
492
292
P4184
P4184
SMP517
OMEB36
SMP474
OMEB13
N25
642
377
E4005
P4169
SMP474
OMEB13
N/A
OMEB10
N26F
381
245
P4169
E4026-S
110-034-069
OMEB40
SMP683
SMP683
N27
560
340
E4005
P4184
SMP474
OMEB13
SMP343
OMEB36
N28
504
309
P4169
E4005
SMP363
OMEB36
SMP363
OMEB40
N29/N29C
656
396
E4005
E4005
110-034-065
OMEB14
110-034-065
OMEB14
N30
618
368
E4001
E4001
OMEB14
110-034-065
OMEB14
*110-034-065
N30E
659
389
E4001
E4001
N/A
N/A
N/A
N/A
N31S
501
318
N/A
N/A
SMP474
OMEB13
N/A
OMEB10
N32
500
315
P4169
E4026-S
SMP476
OMEB13
110-034-056
OMEB10
N33
625
365
P4169
E4026-S
110-034-065
OMEB14
110-034-056
OMEB10
N34
509
329
E4001
E4026-S
SMP476
N/A
110-110-088
110-110-088
N35/N35C
568
348
P4169
E4026-T
110-110-089
110-110-089
110-034-056
OMEB10
N36/N36C
562
342
E4026-T
E4026-S
110-110-054
N/A
110-110-054
N/A
N37
591
366
E4040-S
E4040-S
N/A
N/A
N/A
N/A
N38S
473
339
P
E-B
SMP476
SMP476
110-110-088
110-110-088
N39/N39C
562
342
P4169
E4026-T
110-034-076
N/A
110-034-056
OMEB10
N40/N40C
556
336
E4003
E4026-S
110-034-065
OMEB14
110-034-065
OMEB14
N41
499
309
E4001
E4001
110-034-065
OMEB14
110-034-065
OMEB14
N42
594
359
E4001
E4001
SMP474
OMEB13
110-034-065
OMEB14
N43
485
295
P4169
E4001
110-034-069
OMEB40
SMP683
SMP683
N44
560
340
E4005
P4184
SMP343
OMEB42
SMP343
OMEB42
N45F
554
324
P4184
P4184
110-034-069
OMEB40
SMP683
SMP683
N46
560
340
E4005
P4184
SMP474
OMEB13
SMP474
OMEB13
N47
406
251
P4169
P4169
110-034-065
OMEB14
SMP474
OMEB13
N48
560
335
E4001
P4169
SMP474
OMEB13
SMP474
OMEB13
N49
446
271
P4169
P4169
SMP474
OMEB13
110-034-064
OMEB36
N50
584
349
P4169
E4005
SMP474
OMEB13
110-034-181
110-034-181
N51
365
235
P4169
E4026-BS
SMP334
N/A
110-A42-071
OMEB10
N52/N52F
425
265
P4161
E4026-S
110-004-040
N/A
110-034-181
110-034-181
N53/N53C
628
378
E4040-B
E4026-S
*110-034-065
OMEB14
110-034-065
OMEB14
N54
554
339
E4001
E4001
SMP334
N/A
110-A42-071
OMEB10
N55
585
345
P4161
E4026-S
*SMP516
OMEB14
SMP516
OMEB14
N56
554
339
E4001
E4001
SMP474
OMEB13
N/A
OMEB10
N57G
340
225
P4169
E4026-S
SMP474
OMEB13
N/A
OMEB10
N58
325
215
P4169
E4026-S
*SMP516
OMEB14
SMP516
OMEB14
N59
559
339
E4001
E4001
SMP474
OMEB13
110-110-078
110034078
N60G
340
225
P4169
E4026-T
SMP363
OMEB17
110-034-056
OMEB10
N61/N61C
607
367
E4005-S
E4026-S
110-034-065
OMEB14
110-034-077
OMEB17
N62G
507
317
E4001
E4005-S
SMP474
OMEB13
110-034-077
OMEB17
N63G
478
299
P4169
E4005-S
SMP474
OMEB13
110-034-077
OMEB17
N64/N64C
478
299
P4169
E4005-S
SMP474
OMEB13
110-034-056
OMEB10
N65
385
245
P4169
E4026-S
SMP476
N/A
110-110-088
N/A
N66/N66C
568
335
P4169
E4026-TB
110-110-089
N/A
110-034-056
OMEB10
N67
562
339
E4026-TB
E4026-S
110-034-064
OMEB15
110-034-064
OMEB15
N68
640
384
E4005
E4005
Note:
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
*Spacer Kit SMP511 also supplied.
** Units with build date between 6/2007 - 05/2008 use SMP374
See page 132 for legend of mount types.
cont.
Page 128
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
NITROCHARGERS
UPPER MOUNT BUSH KIT
Part Number
Open Closed
Length Length
Nitrocharger (mm) (mm)
Type
Original Kit
Bushes only
Replacement
LOWER MOUNT BUSH KIT
Type
Original Kit
Bushes only
Replacement
110-034-064
OMEB15
110-034-064
660
394
E4005
E4005
110-034-064
OMEB36
SMP343
470
290
E4005
P4184
SMP403
OMEB42
SMP403
614
354
P4184
P4184
SMP403
OMEB42
110-034-064
620
370
P4184
E4005
SMP474
OMEB13
110-034-064
548
329
P4169
E4005
SMP501
OMEB42
SMP501
614
354
P4184
P4184
SMP501
OMEB42
110-034-064
620
370
P4184
E4005
110-034-064
OMEB15
110-034-064
640
390
E4005
E4005
110-034-064
OMEB15
110-034-064
652
397
E4005
E4005
110-034-064
OMEB15
110-034-064
685
408
E4005
E4005
110-110-077
N/A
SMP474
570
340
E4032-S
P4169
110-034-064
OMEB15
110-034-064
447
287
E4005
E4005
110-034-064
OMEB36
SMP474
507
307
E4005
P4169
SMP474
OMEB13
110-034-072
352
232
P4169
E4005-S
110-034-065
OMEB14
110-034-065
499
309
E4001
E4001
SMP474
OMEB13
SMP381
345
225
P4169
E4026-S
SMP474
OMEB13
N/A
485
295
P4169
E4026-S
110-034-064
OMEB15
110-034-064
587
357
E4005
E4005
SMP474
OMEB13
110-034-064
539
329
P4169
E4005
SMP474
OMEB13
110-034-072
352
232
P4169
E4005-S
SMP474
OMEB13
110-034-064
589
349
P4169
E4005
**110-034-065
OMEB14
110-034-065
594
359
E4001
E4001
110-034-064
OMEB15
110-034-064
582
357
E4005
E4005
SMP415
N/A
110-110-060
470
335
PE4050-B
SMP415
N/A
110-110-060
470
335
PE4050-B
SMP474
OMEB13
110-034-064
589
349
P4169
E4005
SMP474
OMEB13
N/A
485
295
P4169
E4026-S
110-034-064
OMEB15
110-034-064
587
357
E4005
E4005
**110-034-065
OMEB14
110-034-065
599
359
E4001
E4001
SMP474
OMEB13
SMP474
431
261
P4169
P4169
110-034-065
OMEB14
SMP474
545
325
E4001
P4169
SMP474
OMEB13
110-034-072
389
249
P4169
E4005-S
SMP493
N/A
110-110-090
440
290
P4203
E4050-BS
SMP493
SMP493
110-034-063
610
360
P4204
E4005
SMP474
OMEB13
110-110-090
482
302
P4169
E4050-BS
N/A
N/A
N/A
504
318
PN/A
110-110-054
N/A
110-110-069
641
391
E4040-S
E4055-S
SMP474
OMEB13
110-004-074
508
318
P4169
E4026-S
SMP501
OMEB42
SMP501
537
317
P4184
P4184
110-110-066
N/A
110-110-067
608
373
E4005-S
E4005-T
110-110-066
N/A
110-110-066
593
363
E4005-S
E4005-BS
Use OE Bushes
N/A
110-110-075
472
327
N/A
E4055BS
SMP641
N/A
110-110-076
575
350
P4158
E4040-BS
SMP312
N/A
SMP487
548
328
P4170
E4026-S
SMP474
OMEB13
110-034-064
449
279
P4169
E4005
110-034-064
OMEB15
110-034-064
537
337
E4005
E4005
SMP345
OMEB42
SMP345
475
285
P4184
P4184
SMP343
OMEB42
SMP343
554
324
P4184
P4184
110-034-065
OMEB14
110-034-072
527
327
E4001
E4005-S
110-110-085
N/A
110-034-020
578
358
E4057-S
E4001-T
SMP474
OMEB13
110-034-080
532
322
P4169
E4005
SMP483
SMP483
N/A
596
395
N/A
N/A
110-039-058
110039058
N/A
609
402
N/A
N/A
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
*Spacer Kit SMP511 also supplied.
** Spacer Kit SMP495 supplied
See page 132 for legend of mount types.
N68E
N69
N70
N71E
N72F
N73
N74E
N75
N75E/N75F
N76
N77
N78
N79
N80
N81
N83
N84
N85
N86/N86C
N87
N88
N89
N90
N91S
N91SC
N92
N93
N94
N95
N96
N97
N98
N100
N101/N101C
N102
N103S
N104/N104C
N105
N106/N106C
N107/N107C
N108/N108C
N109S
N110
N111
N112
N113
N114
N115
N116
N117
N118
N119S
NC120
Note:
Page 129
OMEB15
OMEB42
OMEB42
OMEB36
OMEB36
OMEB42
OMEB36
OMEB15
OMEB15
OMEB15
OMEB13
OMEB15
OMEB13
OMEB17
OMEB14
OMEB10
OMEB10
OMEB15
OMEB15
OMEB17
OMEB36
OMEB14
OMEB15
110-110-060
110-110-060
OMEB36
OMEB10
OMEB15
OMEB14
OMEB13
OMEB13
OMEB17
110-110-090
OMEB40
N/A
N/A
N/A
OMEB10
OMEB42
N/A
110-110-066
N/A
N/A
N/A
OMEB15
OMEB15
OMEB42
OMEB42
OMEB17
OMEB10
OMEB11
N/A
N/A
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
NITROCHARGERS
UPPER MOUNT BUSH KIT
Part Number
Open Closed
Length Length
Nitrocharger (mm) (mm)
Type
Original Kit
Bushes only
Replacement
LOWER MOUNT BUSH KIT
Type
Original Kit
Bushes only
Replacement
SMP483
SMP483
N/A
N121S
576
389
N/A
N/A
110-039-058
110039058
N/A
NC122
589
402
N/A
N/A
SMP483
SMP483
N/A
N123S
596
395
N/A
N/A
SMP483
SMP483
N/A
N124S
576
389
N/A
N/A
SMP363
SMP363
N/A
N125S
411
289
P
N/A
SMP363
SMP363
N/A
N126S
411
289
P
N/A
SMP354
SMP354
N/A
N127S
601
385
P
E-BS
SMP474
OMEB13
SMP489
N128
358
238
P4205
E4026-T
Use OE Bushes
N/A
110-110-075
N129S
472
327
P
E4055-BS
SMP497
SMP497
N/A
NS130
333
201
P
N/A
SMP497
SMP497
N/A
NS131
333
201
P
N/A
110-110-085
N/A
110-110-086
N132
573
359
E4057-S
E4005-S
SMP493
SMP493
110-110-090
N133
443
287
P4203
E4050-BS
110-110-085
N/A
110-110-086
N134
559
349
E4057-S
E4005-S
SMP483
SMP483
N/A
N135S/N136S
602
393
P
N/A
SMP546
N/A
NC138
609
400
P
SMP633/626
N/A
110-110-060
N139S
543
405
P
E4050-S
SMP633/626
N/A
110-110-060
N140S
543
405
P
E4050-S
SMP569
N/A
SMP621
N141
577
353
P4184
E4005
SMP569
N/A
SMP621
N142
577
353
P4184
E4005
N/A
N143S
590
408
P
N/A
N144S
590
408
P
SMP625
N/A
NC145
651
439
P
SMP641
N/A
110-110-093
N146
655
379
P
E4055-BS
SMP640
N/A
110-110-060
N147S
476
362
P
E4050-S
SMP640
N/A
110-110-060
N148S
476
362
P
E4050-S
110-110-092
N/A
110-110-092
N149
504
313
E4051-BS
E4051-BS
SMP474
OMEB13
110-034-056
N150
388
242
P4205
E4026-S
110-034-056
SMP474
OMEB13
N151
308
202
P4205
E4026-S
SMP641
N/A
110-110-076
N152
576
345
P4158
E4051-BS
SMP474
OMEB13
110-034-074
N153
528
312
P4205
E4026-S
110-034-065
OMEB14
110-034-065
N154
562
336
E4001
E4001
SMP474
OMEB13
110-034-065
N155
568
332
P4205
E4001
Nut only
OEM
OEM
N156S
365
530
N/A
Nut only
OEM
OEM
N157S
365
530
N/A
Nut only
OEM
OEM
N158S
405
610
N/A
OEM
Nut only
OEM
N159S
405
610
N/A
SMP546
SMP546
N/A
NC160
601
403
P
N/A
SMP625 & 633
SMP625 & 633
N/A
NC161
572
386
P
N/A
SMP474
OMEB13
110-034-056
N162
348
222
P4205
E4026-S
SMP625 & 633
SMP625 & 633
N/A
NC163
617
386
P
N/A
SMP501
OMEB42
SMP501
N164
527
317
P4184
P4184
110-034-064
OMEB15
110-034-064
N165
657
397
E4005
E4005
SMP633 & 626
SMP633 & 626
110-110-060
N166S
543
411
P
E4050-S
SMP633 & 626
SMP633 & 626
110-110-060
N167S
543
411
P
E4050-S
SMP649
SMP649
SMP649
N168
600
370
E4005
E4005
SMP649
SMP649
SMP649
N169
600
370
E4005
E4005
SMP474
OMEB13
110-034-056
N170
348
322
P4205
E4026-S
SMP474
OMEB13
SMP650
N171
532
316
P4205
E4005
SMP474
OMEB13
SMP650
N172
532
316
P4205
E4005
N/A
N/A
N/A
N173S
481
301
P
SMP343
SMP343
SMP343
N174
597
341
P4180
P4180
110-034-063
OMEB36
SMP343
N175
603
363
E4005
P4180
110-110-066
N/A
SMP343
N176
535
319
E4055-S
P4180
Note:
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
See page 132 for legend of mount types.
Page 130
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
110-110-075
N/A
N/A
N/A
110-110-090
N/A
N/A
110-110-060
110-110-060
OMEB40
OMEB40
N/A
N/A
N/A
N/A
110-100-060
110-110-060
N/A
OMEB10
OMEB10
N/A
OMEB10
OMEB14
OMEB14
OEM
OEM
OEM
OEM
N/A
N/A
OMEB10
N/A
OMEB42
OMEB15
110-110-060
110-110-060
SMP649
SMP649
OMEB10
OMEB15
OMEB15
N/A
SMP343
SMP343
SMP343
cont.
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
NITROCHARGERS
UPPER MOUNT BUSH KIT
Part Number
Open Closed
Length Length
Nitrocharger (mm) (mm)
Type
Original Kit
Bushes only
Replacement
LOWER MOUNT BUSH KIT
Type
Original Kit
Bushes only
Replacement
110-110-066
N/A
SMP343
N177
485
299
E4055-S
P4180
110-034-080
110-034-080
110-A42-124
N178
600
364
E4005
E4005-S
110-034-080
110-034-080
100-A42-124
N179
790
456
E4005
E4005-S
110-034-080
110-034-080
110-A42-124
N180
690
406
E4005
E4005-S
SMP501
OMEB42
SMP501
N181
537
317
P4184
P4184
SMP474
OMEB13
110-034-056
N182
608
352
P4205
E4026-S
SMP633
N/A
110-110-100
N183S
390
281
PE4063-BS
110-110-076
N/A
110-110-076
N184
379
255
E4051-S
E4051-S
110-043-065
OMEB14
110-110-100
N185
567
341
E4001
E4063-S
N/A
N/A
110-110-075
N186S
426
298
PE4055-BS
SMP475
OMEB13
TBA
N187
360
240
P4205
E4050
N188S
110-034-064
OMEB15
110-034-080
N189
600
360
E4005
E4005BS
110-110-085
N/A
110-110-086
N190
658
394
E4057-S
E4005-S
SMP474
OMEB13
110-034-064
N191
589
349
P4205
E4005-S
SMP659
SMP659
110-110-101
N192S
589
424
PE4055-BS
SMP493
110-110-102
N193
661
391
P4203
E4040-BS
SMP475
OMEB13
TBA
N194
360
240
P4205
E4050
SMP493
110-110-103
N195
560
340
P4204
E4051-S
SMP374
OMEB42
TBA
N196
576
348
P4184
E-TBA
110-034-064
OMEB15
110-034-064
N197
652
397
E4005
E-4005
TBA
TBA
TBA
N198
615
375
E-TBA
E-TBA
SMP493
SMP493
110-110-090
N199
440
290
P4203
E4050-BS
SMP493
SMP493
110-034-063
N200
610
360
P4204
E4005
SMP633/626
SMP633/626
110-110-060
N201S
543
405
PE4050-S
SMP569
SMP569
SMP621
N202
577
353
P4184
E4005
Use OE Bushes
N/A
110-110-075
N203S
472
327
P
E4055-BS
SMP641
N/A
110-110-076
N204
576
345
P4158
E4051-BS
SMP665
N/A
110-110-092
N205
507
312
P4213
E4051-BS
Nut only
N/A
N/A
N206S
602
399
PN/A
Nut only
N/A
N/A
N207S
602
399
PN/A
Use OE Bushes Use OE Bushes
N/A
N208S
608
433
P4214
E4066
SMP493
N/A
110-034-063
N209
610
360
P4204
E4005
SMP493
N/A
110-034-063
N210
610
360
P4204
E4005
SMP374
OMEB42
110-034-181
N211
576
348
P4184
E4026
110-110-105
N/A
110-034-181
N212
618
375
E4053
E4026
N/A
N/A
N/A
N217S
610
395
PN/A
N/A
N/A
N/A
N218S
610
395
PN/A
110-034-003
N/A
110-034-003
OME007
600
359
E4004
E4003
110-034-065
OMEB14
110-034-065
OME013
473
292
E4001
E4001
110-034-065
OMEB14
110-034-065
OME014
495
305
E4001
E4001
SMP333
OMEB13
110-034-065
OME015
415
256
P4175
E4001
110-034-003
N/A
110-034-003
OME018
585
359
E4003
E4003
110-034-065
OMEB14
110-034-065
OME023
429
270
E4001
E4001
SMP333
OMEB13
110-034-065
OME025
415
256
P4175
E4001
SMP333
OMEB13
110-034-065
OME027
497
297
P4175
E4001
SMP474
OMEB13
110-110-009
OME028
450
281
P4169
E4028-S
110-110-009
N/A
110-110-009
OME029
502
314
E4028-S
E4028-S
110-110-009
N/A
110-110-009
OME030
470
302
E4028-S
E4028-S
SMP333
OMEB13
110-034-065
OME031
627
379
P4175
E4001
SMP333
OMEB13
110-034-065
OME032
608
369
P4175
E4001
SMP636
OMEB13
110-034-072
OME033
615
382
PE4005-S
SMP333
OMEB13
110-034-065
OME034
481
284
P4175
E4001
110-034-065
OMEB14
110-034-065
OME035
495
299
E4001
E4001
6082183
6082183
N/A
OME036
560
335
E
E
Note:
Bush kits with part numbers startingg with SMP indicate the kits have the urethane bush, mountingg nut & washers.
See page 132 for legend of mount types.
Page 131
SMP343
OMEB11
OMEB11
OMEB11
OMEB42
N/A
N/A
N/A
N/A
N/A
TBA
OMEB15
N/A
TBA
TBA
OMEB15
TBA
110-110-090
OMEB40
110-110-060
OMEB40
110-110-075
N/A
N/A
N/A
N/A
110-110-110
OMEB40
OMEB40
110-034-181
110-034-181
N/A
N/A
N/A
OMEB14
OMEB14
OMEB14
N/A
OMEB14
OMEB14
OMEB14
N/A
N/A
N/A
OMEB14
OMEB14
OMEB17
OMEB14
OMEB14
N/A
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - SHOCK ABSORBERS
SHOCK ABSORBER MOUNT TYPES
Mount Type
Pin Part No.
P4161
P4169
P4170
P4175
P4184
P4203
P4204
P4205
Dimensions (mm)
Thread Length X Dia
62 x M10 x 1.5
53 x M10 x 1.25
73 x M10 x 1.5
58 x M10 x 1.5
71 x M12 x 1.25
85 x M14 x 1.5
77 x M14 x 1.5
54 x M10 x 1.25
OME Replacement
Part No.
OMEB13
OMEB13
OMEB13
OMEB13
OMEB42
Use original
Use original
OMEB13
Mount Type
Eye Part No.
E4001
E4003
E4005
E4026
E4028
E4032
E4040
E4050
E4055
E4057
T-CROSS PIN MOUNTING
B-BONDED BUSH
Dimensions (mm)
Mounting Kit
OD x ID x L
Replacement Part No.
37 x 25.3 x 24.3
OMEB14
42.6 x 37.7 x 19.5
Not available
44.2 x 31.7 x 30
OMEB36 *OMEB40
37 x 27 x 25
OMEB10
38.4 x 25.1 x 23
Not available
46.7 x 36.6 x 33
Not available
46 x 37 x 30
Not available
45 x 39 x 35
Not available
50 x 40.2 x 34
Not available
42 x 32.5 x 29
Not available
S-BUSH WITH SLEEVE
*Special Bush for N22F, N29/N29C Lower Rear Mount
SPECIFICATIONS - TORSION BARS
TORSION BARS
Part Number
303001
303002
303003
303004
303005
303006
303007
303008
303009
303010
303011
303012
303013
303014
A
± 2.0
1160
1210
1065
1000
925
1365
890
1205
1277.5
1277.5
1307.5
1142
1024
1225
B
± 0.15
30.4
32.8
23.4
24.5
25.7
27.5
26.7
26.0
25.5
27.3
27.5
26.0
27.0
30.3
C
+0 -0.2
47.0
47.0
33.0
33.0
30.75
30.0
30.0
30.0
30.0
30.0
30.0
36.0
30.8
37.9
C
Spline No.
46
46
43
43
40
39
39
39
39
39
39
47
40
6 side hex
D
+0 -0.2
47.0
47.0
30.75
33.0
30.75
30.75
30.0
30.0
30.75
30.75
30.75
36.0
30.75
37.85
D
Spline No.
46
46
40
43
40
40
39
39
40
40
40
47
40
6 side hex
All dimensions in millimetres (mm)
Page 132
OME INT NO.28.1 DECEMBER 2012
SPECIFICATIONS - STABILISERS
STEERING STABILISERS
Part Number
OMESD01
OMESD02
OMESD11
OMESD16
OMESD17
OMESD21
OMESD22
OMESD23
OMESD24
OMESD30
OMESD31
OMESD32
OMESD33
OMESD34
OMESD35
OMESD36
OMESD40
OMESD47
OMESD48
Upper Mount Type (mm)
Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Pin 60 x 9.5
Eye with Bush & Mounting Pin
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Lower Mount Type (mm)
Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Eye with Bush
Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Eye with Bush & Sleeve
Eye with Bush
Eye with Bush & Sleeve
Page 133
Open Closed
Length Length
(mm)
(mm)
552
342
655
394
516
308
535
314
622
373
542
340
537
328
454
316
651
417
448
290
577
392
680
440
611
364
575
347
503
311
484
289
499
309
750
510
499
310
Mounting Kit No.
142995
No Kit
140276
140276
142387
140504
No Kit
142995
142995
No Kit
No Kit
500555
140953
No Kit
No Kit
140276
500498
142995
5004981
No. of
Kits
OME Bush Kit
1
1
1
1
1
OMEB14
1
1
1
1
1
1
1
1
OME INT NO.28.1 DECEMBER 2012
RECOMMENDED FITTING TIMES
COIL SPRINGS SYSTEMS
All Coil Spring Models (Except Land Rovers)
Fitment of 4 Shock Absorbers & 4 OME coil springs
Land Rover All Coil Spring Models
Fitment of all the above plus additional time to remove front shock absorber towers
Torsion Bar Front with Rear Coil Suspension
Fitment of 4 Shock Absorbers, 2 OME coil springs & front torsion bar adjustment
Coil Front with Rear Leaf Suspension
Fitment of 4 Shock Absorbers, 2 OME coil springs & 2 OME Leaf springs
Coil Over Front Strut with Rear Coil Suspension
Fitment of 2 Shock Absorbers, 2 OME struts & 4 OME coil springs
Coil over Front Strut with Leaf Rear Springs
Fitment of 2 Shock Absorbers, 2 Struts, 2 Coils & 2 Leaf Springs
2.0 hours
2.5 hours
2.0 hours
3.5 hours
3.0 hours
4.0 hours
LEAF SPRING SYSTEMS
All Leaf spring Models (Except HiLux)
Fitment of 4 Shock Absorbers, 4 OME Leaf Springs, and U bolts and spring bushes as required
Toyota HiLux All Leaf Spring Models
Fitment of all the above plus additional work required to strengthen front spring seat mount
Front Torsion Bar with Rear Leaf Spring Models
Fitment of 4 Shock Absorbers, 2 OME rear leaf springs, U bolts, spring bushes and
front torsion bar adjustment
5.0 hours
6.0 hours
3.0 hours
CARTRIDGE REPLACEMENT
Additional work required to install cartridge per strut
0.5 hours
TORSION BARS
Remove and replace a set of Bars (no removal complications)
Remove and replace a set of Bars (removal complications eg. OE splines corroded)
1.5 hours
2.5 hours
MISCELLANEOUS
Caster kits
Steering stabilisers
Greasable shackles (complete vehicle set)
2.0 hours
0.5 hours
2.0 hours
FRONT END WHEEL ALIGNMENT ADJUSTMENTS
Price
Live axle front end
Independent front end
The above fitting times are only a guide, and additional time may be involved due to vehicle modifications or
pre-existing accessories which can interfere with the fitment of the suspension.
Page 134
OME INT NO.28.1 DECEMBER 2012
OME Features
NITROCHARGER SPORT SHOCK ABSORBERS
LARGE BORE 35MM TWIN TUBE DESIGN - Allows greater
oil volume for cooling and sustained valving performance
and strong 1.6mm outer tube construction protects the
vital internal components from damage.
LARGE 18MM HARDENED CHROME PISTON ROD Strong enough to handle any load or harsh conditions
expected from your 4x4.
TRIPLE LIP CHECK VALVE OIL SEAL – MK2 -The latest
technology in oil seal design – physically larger with
quantum improvements in durability, oil and gas retention
with much greater resistance to heat so it keeps working
under the harshest conditions.
TEFLON IMPREGNATED LOW FRICTION ROD GUIDE The latest refinement in rod guide design further reduces
heat build up and maintains performance.
TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A
new component that maintains consistent and uniform
performance by providing a tight and uniform fit between
the piston rod and rod guide.
MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique
and new valving system that features multiple disc valving
control at the base of the shock and on both sides of the
piston rod. This allows the OME engineers more valving
options for better ride quality and handling control.
35MM HIGH FLOW TEFLON BANDED PISTON - New
low friction design has less restrictive oil flow through the
piston, reduces heat build up and aeration of the oil that
leads to fade.
VEHICLE SPECIFIC VALVING - OME shock absorber’s
performance stand head and shoulders over its
competitors because many hours of OME engineering
valving work have been put into each and every shock
absorber to ensure our customers get the best ride and
handling their vehicle can have.
POLYETHYLENE DIRT SHIELD – Impact resistant,
polyethylene dirt shield provides additional protection from
stone chips and off road debris.
NITROGEN GAS – Increases the temperature operating
range and improves oil flow through the valving, ensuring
optimum performance.
SUPPLEMENTARY WELDS - For strength and reliability,
all mounts have supplementary welds.
NITROCHARGER SHOCK ABSORBERS
GIANT 18MM CHROMED SHAFT - Indestructible for
Australia’s rugged off roading. Induction hardened then
hard chromed to a superfine finish.
NITROGEN GAS - The gas pressure keeps the oil cohesive
under all situations.
TWIN TUBE DESIGN - 33% thicker outer tube insures that
rocks do not damage internal operating components. This
design also allows for a greater volume of oil which keeps
shock cooler.
35MM SEVEN STAGE COMPRESSION VALVE - Delivers
all the subtleties of compression rates for the best ride and
handling.
CHECK VALVE SEAL - The latest in seal technology,
this shaft seal significantly improves gas retention whilst
offering excellent longevity.
GLACIER BUSH - A Teflon coated rod guide bush significantly reduces heat build up in the rod guide area,
developed from the Emu’s off road racing programme.
GIANT 35MM TEFLON BANDED PISTON - A new four
stage coil sprung rebound valve system to control
vehicle bounce.
SUPPLEMENTARY WELDS - On all mounting eyes & pins
for maximum shock absorber mount strength.
STONEGUARD - Protects oil seal and piston rod against
stone and dirt damage.
COIL SPRINGS
X5K MICRO-ALLOYED SPRING STEEL – New generation
high strength spring steel grade designed to withstand
higher operating stresses with superior resistance to sag
and improved toughness and corrosion fatigue properties.
SHOT PEENED – To reduce stress, which greatly
enhances spring life.
DOUBLE SCRAGGED – To eliminate spring sag.
VARIABLE AND CONSTANT RATE - Designs used to
obtain optimum ride comfort and load carrying capabilities.
STEERING STABILISERS
COIL SPRUNG 9 STAGE VALVING - For optimum
performance.
35MM PISTON & BORE - Greater oil volume giving better
damper performance.
TWIN TUBE DESIGN - Protects the internal components
against stone damage.
STEEL STONEGUARD - Protects the piston rod against
stone damage.
FOAM CELL - Keeps the oil at the valving to prevent fade.
ORIGINAL MOUNTS - All mounts are of similar design to
original stabilisers for ease of fitment.
LEAF SPRINGS
FLAT AXLE SEAT AREA - Lowers spring stress whilst
retaining spring free camber height. Unique to most
OME springs.
ANTI FRICTION INTER LEAF LINERS - Used where
applicable to reduce friction between spring leaves giving
better ride comfort and increased spring life.
SHOT PEENED - On the tension side of all leaves to
double spring life.
DRAW TAPERED & DIAMOND CUT LEAVES - For
reduced interleaf friction and improved load distribution
in the load bearing area.
GRAPHITE COATED - For further reduced friction.
MILITARY WRAPPED - For extra safety (where fitment
permits).
LOOSE CLAMPED - For smooth & quiet operation.
URETHANE BUSHES - LEAF SPRING
PREMIUM GRADE - Not all bushes are the same - OME
bushes are precision moulded in captive moulds to
ensure exact tolerances for long bush life.
SPLINES - Ensures the best fit by taking up irregularities
in spring eyes.
UNIQUE OME DESIGN - Clever lip seal and shoulder
design prevents dirt penetrating between bush shoulder
and shackle face.
GREASABLE SHACKLES
REDUCED WEAR - Greasable shackles reduce shackle
pin deterioration, increase bush life, enables easy
maintenance and improve ride and handling.
ANTI INVERSION FACILITY - Built in feature on all
LandCruiser greasable shackles.
SERVICING - Simple & effective.
WARRANTY: For a copy of ARB’s Warranty Policy, ARB Products: Warranty Against Defects, please visit the ARB website – www.arb.com.au
NOTES
DISTRIBUTED BY
Head Office:
ARB Corporation Limited
42-44 Garden Street
Kilsyth, Victoria 3137
Australia
Tel +61 3 9761 6622
Fax +61 3 9761 6807
Web: www.arb.com.au
International enquiries
[email protected]
North, Central & South American Enquiry Centre:
ARB 4x4 Accessories
720 SW 34th Street
Renton, WA 98057
USA
Tel: (425) 264 1391
Fax: (425) 264 1392
Web: www.arbusa.com
Email: [email protected]

Similar documents

REAR

REAR applicable to reduce friction between spring leaves giving better ride comfort and increased spring life. SHOT PEENED - On the tension side of all leaves to double spring life. DRAW TAPERED & DIAMO...

More information

OME Cat 24 EXPORT Jun Update

OME Cat 24 EXPORT Jun Update Reduced Wear - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling. Anti Inversion Facility - Built in feature on all Lan...

More information

Old Man Emu Application Guide

Old Man Emu Application Guide preventing axle bounce over rough roads. If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rou...

More information

REAR - ARB

REAR - ARB applicable to reduce friction between spring leaves giving better ride comfort and increased spring life. SHOT PEENED - On the tension side of all leaves to double spring life. DRAW TAPERED & DIAMO...

More information

OME Cat 24 EXPORT Nov09 Update

OME Cat 24 EXPORT Nov09 Update and new valving system that features multiple disc valving control at the base of the shock and on both sides of the piston rod. This allows the ome engineers more valving options for better ride q...

More information