Case 2 - Steiner Tractor Parts

Transcription

2 Case
J.I. Case Company produced their first tractor in 1892. They were
already known well for their threshing machines. Case adopted the
famous, “Old Abe” eagle trademark in 1865 as a symbol of honesty,
integrity and reliability. The eagle, Old Abe was a civil war mascot and
has an interesting history himself.
View more pictures & tractor
stories in our digital book!
www.SteinerTractor.com >
Steiner Community >
Tractor Stories
Photos submitted by folks just like you!
A. "1947 Case S Export" Barbara and Maynard Franks, Savannah, TN
B. "1958 Case 400" Greg Blasel, Dorchester, WI
C. "1957 Case 400 Super Diesel" Jim Nufer, Camarillo, CA
D. "Case LA" Ken Wood and Terry Dietrich, Barrhead, Alberta, Canada
E. "Case in Point" Phil Pidgeon, Forestdale, Queensland, Australia
Our complete album can be viewed at
http://www.steinertractor.com/tractor-photo-winners.html
A
B
D
62
C
E
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Case: Alphabetical index
B
Battery cables.....................................81
Battery clip...........................................81
Battery retainer j-bolt......................81
Brake parts
belt pulley brake linings..............98
boots...................................................99
disc brake ball..................................99
disc brake linings............................98
discs.....................................................98
lining kit.............................................98
riveting tools....................................99
springs................................................98
C
Camshaft, parts
bearing & bushing sets.................70
camshaft............................................70
lifter.....................................................70
Caps
air cleaner..........................................90
distributor.........................................82
magneto............................................84
oil fill / breather...............................72
pre cleaner........................................91
radiator...............................................78
Carburetors, parts
adjustment needle assy...............75
bushing..............................................75
carburetors.......................................75
elbow strainer assy........................75
floats...................................................76
gaskets........................................75, 76
needle float valves.........................75
nozzles................................................75
repair kits.................................... 76-77
Choke parts
cables..................................................75
clip.......................................................75
Cigarette lighters...............................82
Clutch parts
bearings.............................................94
clutch disc.........................................94
gasket.................................................94
Crankshaft, parts
bearings...................................... 71-72
C
Crankshafts, parts cont...
crankshafts................................. 70-71
seals.....................................................71
D
Dash light, parts
cover...................................................88
dash light...........................................88
Decals................................................. 104
Distributor parts
bushing and shim kit....................83
caps.....................................................82
clamp..................................................83
clips.....................................................83
coils......................................................82
cover...................................................83
dust cover..........................................82
gasket.................................................83
resistor................................................82
rotor button......................................84
rotor buttons....................................84
spark plug wire sets.......................83
spark plugs.......................................83
tags......................................................83
terminal insulator assys................82
tune-up kits...............................83, 84
Drawbars, parts
bars................................................... 103
drawbars......................................... 103
lock................................................... 103
stabilizer kit................................... 103
E
Eagle hitch latch set, parts.......... 103
knob................................................. 103
latch.................................................. 103
locks................................................. 103
Electric outlet socket, parts
boot.....................................................81
connector plug................................81
socket.................................................81
Emblems / nameplates
emblems............................................89
Engine gasket sets..................... 69-70
Engine overhaul kits.........................69
F
Fan belts................................................79
Flywheel ring gears..........................73
Fuel filters
element..............................................93
fuel filters...........................................93
Fuel tank, parts
caps.....................................................92
gaskets...............................................92
screen.................................................93
webbings...........................................92
Fuse holder..........................................81
G
Gauges
amp.....................................................79
oil pressure................................79, 80
water temperature.........................80
Gear shift boots..................................94
Gear shift knobs.................................94
Generator parts
band cover........................................86
cut-out assy......................................86
tags......................................................86
Grille parts
clip.......................................................90
nuts......................................................90
stub assy............................................90
H
Headlights, parts
bezel.............................................87, 89
bulbs............................................ 87-89
gaskets...............................................89
headlights.........................................87
knobs..................................................89
lens......................................................89
reflectors............................................89
ring...............................................87, 89
rings....................................................89
switch.................................................89
terminal..............................................89
washer................................................89
Hydraulic seal......................................99
I
Ignition parts
bushing and shim kit....................83
caps.....................................................82
clamp..................................................83
clips.....................................................83
coils......................................................82
cover...................................................83
dust cover..........................................82
gasket.................................................83
resistor................................................82
rotor button......................................84
rotor buttons....................................84
spark plug wire sets.......................83
spark plugs.......................................83
tags......................................................83
terminal insulator assys................82
tune-up kits...............................83, 84
Inner tube valves............................ 100
nut..................................................... 100
K
Knobs.................................... 87, 94, 103
L
Light switches, parts
knobs..................................................87
switches.............................................87
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
M
Magnetos, parts
caps.....................................................84
coils......................................................84
condensors.......................................84
gaskets...............................................84
magneto............................................84
manual...............................................84
points..................................................84
rotors...................................................84
Manifolds, parts
adaptor...............................................67
elbows.........................................66, 68
ferrules...............................................67
gasket material................................68
gaskets........................................ 66-68
manifolds.................................... 66-68
nuts......................................................68
pipes....................................................66
plates..................................................66
Manuals.............................................. 105
Mufflers
clamps.........................................73, 74
mufflers..............................................74
O
Oil / breather caps.............................72
Oil filters, part
oil filters.............................................73
Oil pan drain plug
drain plug..........................................73
gaskets...............................................73
washer................................................73
Oil pressure gauges, parts
copper line kit..................................80
fittings................................................80
gauges.........................................79, 80
switches.............................................79
P
Piston ring sets............................68, 69
Power steering parts
bolt......................................................96
couplers.............................................96
port blocks........................................96
priority flow control valve...........96
pulley..................................................96
shaft cross and bearing................96
torque generator............................96
Pre-cleaner parts
base.....................................................91
bowls............................................91, 92
caps assys..........................................91
clip/springs kit.................................92
covers..................................................91
pre-screener.....................................91
screen.................................................92
PTO parts
gears....................................................99
Index continues on next page
63
Case
A
Air cleaner parts
caps.....................................................90
clamps................................................91
filter element....................................91
oil cups........................................90, 91
pipe.....................................................90
vacuator valve.................................91
Alternators, parts
alternators.........................................86
bracket...............................................86
mounting kits..................................86
pulleys................................................86
Amp gauges........................................79
Case
Case: Alphabetical index cont...
P
PTO parts cont...
mounting plates................... 99, 100
over-running clutches............... 100
seals.....................................................99
shield........................................ 99, 100
R
Radiator, parts
caps.....................................................78
clamps................................................77
drain plug..........................................77
gaskets........................................77, 78
mounting pad..................................77
radiators.............................................77
Raincaps................................................75
Rims, rear and front
bearing kits.................................... 100
bolts........................................ 100-102
inner tube valves......................... 100
nuts................................................... 100
reinforcing ring............................ 102
rims..........................................101, 102
stops................................................. 102
tires, tubes...................................... 101
washer............................................. 101
wheels....................................100, 101
S
Seats, parts
adjustment handle........................97
assy......................................................97
backs...................................................97
bearing...............................................98
bushings............................................97
coil.......................................................97
pads.....................................................97
pivot support rod...........................97
shock absorbers..............................97
springs................................................97
Sediment bowl assys., parts
bail assys............................................93
gaskets...............................................93
glass bowls.......................................93
screens...............................................93
sediment bowl assys..............92, 93
Serial number tags, parts................90
rivets....................................................90
tags......................................................90
Sleeve sealing o-rings......................69
Starters, parts
band cover........................................84
drives..................................................84
keys......................................................85
repair studs.......................................85
spring..................................................84
starter solenoids.............................85
switches......................................84, 85
tags......................................................84
Steering parts
column boot.....................................94
64
S
Steering wheels, parts
center caps / emblems.................95
nuts......................................................95
plate....................................................95
sector pin stud.................................95
spinner...............................................96
spinner knob....................................96
steering wheels........................ 94-96
T
Tachometers
drive assys.........................................80
drive gear..........................................80
drive gear & shaft...........................80
Tail lights, parts
bezel....................................................89
bulbs...................................................89
gaskets...............................................89
knobs..................................................89
lens...............................................88, 89
reflector..............................................89
reflectors............................................89
ring......................................................89
rings....................................................89
switches.............................................89
tail lights............................................88
terminal..............................................89
washer................................................89
Thermostats........................................78
Tie rod boots................................96, 97
Tires, tubes........................................ 101
nut..................................................... 100
tires................................................... 101
tubes................................................ 101
valves............................................... 100
Toolboxes.............................................98
Top-links, parts
bushing........................................... 103
pins................................................... 103
top links.......................................... 103
W
Wheels, front and rear cont...
inner tube valves......................... 100
nuts................................................... 100
rear rim bolt assys....................... 101
reinforcing ring............................ 102
rims..........................................101, 102
stops................................................. 102
tires, tubes...................................... 101
washer............................................. 101
wheels....................................100, 101
Wiring harness kits............................82
grommet............................................82
U
Umbrellas.......................................... 104
V
Valve cover gaskets...........................70
Valve grind gasket sets....................70
Voltage regulators
regulators..........................................86
W
Warning lights, parts........................88
bulbs...................................................88
lens......................................................88
Water pumps.......................................78
gasket.................................................79
Water temperature gauges............80
Wheels, front and rear
bearing kits.................................... 100
bolts........................................ 100-102
Case: Beginning serial numbers
For 6 digit serial numbers (up to 1938) use the 1st & 4th digit
and then subtract (3) three to find the year of your Case tractor.
EXAMPLE: 300201 (1932) - (3) = YEAR 1929
Models C, CC, CI, CO,
R, RC, D, DC, DI, DO,
LA, LAI, S, SC, SI, SO,
V, VA, VC, VI, VO, VAC,
VAH, VAI, VAO
1929...................... 300201
1930...................... 300301
1931...................... 300401
1932...................... 300501
1933...................... 300601
1934...................... 300701
1935...................... 300801
1936...................... 300901
1937...................... 301001
1938....................4200001
1939....................4300001
1940....................4400001
1941....................4500001
1942....................4600001
1943....................4700001
1944....................4800001
1945....................4900001
1946....................5000001
1947....................5100001
1948....................5200001
1949....................5300001
1950....................5400001
1951....................5500001
1952....................5600001
... For Model VAC:
1953....................5750001
1954....................6011001
1955................. 60338001
... For Model D, LA:
1953....................5750001
1954....................5800001
... For S series:
1953....................5700001
1954....................8035001
Model 200B, 210B
1958....................6095001
1959....................6120001
Model 211B, 311B,
411B, 511B, 611B
1958....................5095001
1959....................6120001
Model 300, 320
1956....................6050301
1957....................6075001
Model 300B, 310B,
320B
1958....................6095001
1959....................6120001
Model 300, 400
1957....................3000001
Model 320
1956....................6050301
1957....................6075001
1958....................6095001
1959....................6120001
Model 400
1955....................8060001
1956....................8080001
1957....................8100001
Model 400B
1958....................6095001
1959....................6120001
Model 420B
1958....................6095001
1959....................6120001
1960....................3012275
Model 430, 530
1960....................6144001
1961....................6162601
1962....................8190001
1963....................8208001
1964....................8229001
1965....................8253501
1966....................8279001
1967....................8306501
1968....................8332101
1969....................8356251
Model 430, 530
Utility
1960....................3012275
1961....................3016001
Model 440, 540, 740,
840, 940
1960....................8160001
1961....................8168801
1962....................8190001
1963....................8208001
1964....................8229001
1965....................8253501
1966....................8279001
1967....................8306501
1968....................8332101
1969....................8356251
Model 730, 830, 930,
1030
1960....................8160001
1961....................8168001
1962....................8190001
1963....................8208001
1964....................8229001
1965....................8253501
1966....................8279001
1967....................8306501
1968....................8332101
1969....................8356251
70 series SN:
stamped on LH
side, just above the
platform floor, next
to steering wheel.
Model 470, 570,
580B, 770, 870, 970,
1070, 1090, 1170
1970....................8650001
1971....................8674001
1972....................8691801
1973....................8712001
1974....................8736601
1975....................8770001
Model 500
1953....................5622406
1954....................8035001
1955....................8060001
1956....................8080001
1957....................8100001
Model 500B, 600B
1958....................6095001
1959....................6120001
Model 600
1957....................8100001
Model 680C
1969....................9103226
1970....................9104651
1971....................9106001
Model 1031, 1032
1966....................8279001
1967....................8306501
1968....................8332101
1969....................8356251
Model 1175, 1270,
1370, 2470
1972....................8693001
1973....................8712001
1974....................8736601
1975....................8770001
Model 1200TK
1966....................9802101
1967....................9806101
1968....................9808000
1969....................9808276
Model 1470TK
1969....................9810000
1970....................9811301
1971....................8674001
1972....................8691801
Model 2470, 2670
1971....................8674001
1972....................8692381
1973....................8712001
1974....................8762001
1975....................8767001
Model L, LI
1929...................... 303201
1930...................... 303301
1931...................... 303401
1932...................... 303501
1933...................... 303601
1934...................... 303701
1935...................... 303801
1936...................... 303901
1937...................... 304001
1938....................4200001
1939....................4300001
1940....................4400001
DAVID BROWN
Model 770
1965...................... 580001
1966...................... 582513
1967...................... 586673
1968...................... 588579
1969...................... 590646
1970...................... 592237
Model 780
1967...................... 600001
1968...................... 600879
1969...................... 602853
1970...................... 606109
1971...................... 609665
Model 880
Selectmatic
1965.................... 522384*
1965...................... 530001
1966...................... 531022
1967...................... 539410
1968...................... 546000
1969...................... 551553
1970...................... 557013
1971...................... 560766
*Prior "Implematic"
series
Model 990
Selectmatic
1965.................... 472273*
1965...................... 482001
1966...................... 483768
1967...................... 496283
1968...................... 504690
1969...................... 808150
1970...................... 818301
1971...................... 850001
1972...................... 850600
1973...................... 854403
1974...................... 859367
1975...................... 863900
*Prior "Implematic"
series
Model 1210
1971...................... 720001
1972...................... 720053
1973...................... 722305
1974...................... 724659
1975...................... 728080
1976................. 11150001
1977................. 11154968
1978................. 11159654
1979................. 11163305
1980................. 11166342
Model 1212
1971....................1000001
1972....................1000240
1973....................1001182
1974....................1002487
1975....................1005238
Model 1412
1975....................1050004
Model 3800
1968...................... 650001
1969...................... 650277
1970...................... 650358
Model 4600
1968...................... 900001
1969...................... 900312
1970...................... 900422
Model 995
1971...................... 920001
1972...................... 921383
1973...................... 925158
1974...................... 928575
1975...................... 931772
1976................. 11070001
1977................. 11080236
1978................. 11089141
1979................. 11096828
1980................. 11104577
Model 996
1972...................... 980001
1973...................... 981776
1974...................... 984145
1975...................... 986272
1976................. 11070001
Model 1200
1967...................... 700001
1968...................... 704433
1969...................... 707958
1970...................... 712203
1971...................... 716091
65
Case
For 7 digit serial numbers (1938 to 1953) use the 1st & 2nd digit
and then subtract (4) four to find the year or your Case tractor.
EXAMPLE: 4200001 (1942) - (4) = YEAR 1938
Model 700, 800, 900
1957....................8100001
1958....................8120001
1959....................8140001
Manifolds, parts
Order #
Engine parts
Case
CKS103
CKS103GK
CKS101
MHS006
MHS006EXP
IHS001EXP
MHS006GK
CKS083
Price
$224.95
$28.50
$49.95
$135.70
$9.95
$10.95
$9.50
Manifolds, parts cont...
Description / Application
Order #
CKS056
Manifold, Exhaust
Fits: C, CC, D series
Replaces: 5360A
NEW! 3-pc. Intake & exhaust
Manifold Gasket Set w/out Ferrules
Fits: C, CC, D, DC series
Replaces: 0891AB, 1349074C1
NOTE: Includes (2) manifold & (1)
carburetor gasket.
Exhaust Elbow
Fits: C, D, DC, Replaces: 5148A
(2.275" pipe O.D., 3-1/2" c.c. bolts,
9" o/a length)
Manifold fits: V, VC, VI, VO, Terra
Trac Crawler; Silver King Model 42;
Many miscellaneous F124, F140, F162
flathead Continental engines
Replaces: Continental F124E-500
(1-1/2" pipe thread; 15-1/2" c.c.
outside holes & 16-3/4" o/a)
Exhaust Pipe
Fits: V, VC, VI, VO, Terra Trac,
Crawler
(1-1/2" pipe, 2-11/16" length)
USA made
Exhaust Pipe only
Fits: V, VC, VI, Terra Trac, Crawler
Replaces: VT2290
(1-1/2" pipe, approx. 8" length)
Gasket (For MHS006)
Replaces: Continental F400E-303
USA made
MHS006GK
66
$204.95
$9.50
2-Piece Int & Exh Manifold
Fits: VA, VAC, VAH, VAI, VAO (All
engine SN: A4700001 & up w/ 2 piece
manifold), Replaces: VT329, VT330
NOTE: Will not fit engines w/ 1-piece
intake & exhaust manifolds.
Gasket (For CKS085)
USA made
Exhaust Elbow
Fits: Same as CKS085 (Will not fit
VAO), Replaces: VT286
Int & Exh Manifold fits: 200B, 300B,
350, 400B, 420B, 510B, 511B, 610B,
611B; Dozers: 310, 310C, 320, 420 (All
w/ G126, G148, G164" gas engine)
(15-5/8" c.c. outside bolt holes)
Replaces: G1064, G2009 (exhaust);
G1066, G2096, G11149 (intake)
(2-1/2" c.c. carb holes)
CKS065
$199.95
CKS065EX
$135.00
CKS2618
$7.95
Manifold Block Off Plate
Fits: Same as CKS065, CKS065EX
Replaces: G1067
(3" c.c. holes)
USA made
MHS006GK
$9.50
Gasket (For CKS065)
Replaces: VT3394
USA made
CKS065ELB
$48.50
Exhaust Elbow fits: Some 200B, 300B,
400B, 510B, 511B (All w/ vertical
exhaust), Replaces: G2022
(1-15/16" O.D. pipe outlet, 3.00" c.c.
bolt holes)
CKS2614
$3.85
Exhaust Elbow or Block Off Plate
Gasket fits: CKS085, CKS083, CKS056,
CKS065, CKS065ELB applications
Replaces: G11201, 1349111C1
(3" c.c. bolt holes. 1-3/4" ID center
hole)
CKS069
$198.50
Manifold w/ (2) Plates
Fits: 430, 530, 470, 570, 480, 480B, 580,
580B gas; Dozers: 310D, 310E, 310F,
310G, 420B, 420C gas; Wheel Loaders:
W3 gas, Replaces: G2042, A39231
(15-5/8" c-c outer bolt hole)
CKS069PLATE
$7.95
MHS006GK
$9.50
FDS021GK
$2.00
$49.50
Exhaust Elbow
Fits: VA, VAC, VAH, VAI (All up
to engine SN: A4700000 w/ 1-Piece
Manifold), Replaces: VT200
CKS085
Price
$38.00
Exhaust Manifold only
Fits: Same as CKS065
Replaces: G1064, G2009
Plate only
Fits: Same as CKS069, CKS053
Replaces: G2044
Gasket only
(For CKS069) USA made
Gasket only (For Block Off Plate)
(2-1/4" center hole, 3-3/8" c.c. bolt
pattern) NOTE: Sold individually.
Order #
CKS053
Exh Manifold w/ (2) Plates 188 & 207
Diesel, Triple Outlet
Fits: 430, 530, 630; Industrial
Backhoes: 470, 480, 480B, 480C, 480D,
480LL, 570, 580, 580B, 580C, 580D;
Wheel Loaders: W3, W5A, W11;
Crawlers: 310E, 310F, 310G, 350, 350B,
420C, 450, 450B; Forklifts: 580, 584,
584C, 584D, 585C, 585D, 586C, 586D;
Skid Steers: 1740, 1835, 1845, 1845S
Replaces: G2113, A39233, A182084
Order #
Price
CKS2380
$4.50
Manifold Gasket fits: 700, 800, 930
series diesel (4 to 6 used exhaust); 830
gas (4 used exhaust); 730 diesel (2 to 4
used intake/exhaust)
Replaces: A11889, 1349070C1
(2.642" O.D., 1.917" I.D., 0.110" thick)
NOTE: Sold individually. See
website for full applications.
CKS2361
$7.95
Manifold Ferrule (Exhaust, unless
noted) fits: C, CC, D, DC, 400 gas,
LP, diesel; 500 diesel, 600 LP, diesel;
700, 800 gas, LP; 900 diesel exhaust,
910B LP intake, Replaces: 0887AB,
O9813AB, A27908
(1.750" O.D., 1.625" ID, 0.500" long)
USA made NOTE: Sold individually;
4-cyls. use (4), 6-cyls. use (6) per
engine.
CKS2370
$7.95
Manifold Ferrule (Intake)
Fits: C, CC, D, DC, 400, (600 LP), 700,
800, (900, 930 LP), Replaces: O886AB,
A26433 (1.500" O.D., 1.375" ID, 0.500"
long, 1/16" wall thickness)
USA made NOTE: Sold individually.
4-cyls. use (2), 6-cyls. use (3) per
engine.
CKS2386
$7.95
Manifold Ferrule (Exhaust)
Fits: 700, 800 diesel (4 used); 830 gas
(4 used); Early 930 diesel up to 1964
w/ center exhaust (6 used)
Replaces: A11837
(1.879" O.D., 1.738" I.D., 0.072" thick,
0.500" wide)
See website for full applications.
CKS2389
$9.85
Manifold Ferrule (Exhaust)
Fits: 730 gas (4 used); Early 930 gas up
to 1964 (6 used), Replaces: A21635
(1.885" & 1.752" tapered O.D., 1.625"
to 1.743" tapered I.D., 0.493" wide)
NOTE: Sold individually.
CKS2395
$9.85
Fits: 730 gas (2 used); 930 gas w/
engine SN: 2142563 & up, 1965 & up
(3 used), Replaces: A21634
(1.681" to 1.504" tapered O.D., 1.368"
to 1.531" tapered I.D., 0.505" wide)
CKS2399
$7.95
Fits: 830 gas (2 used)
Replaces: A20814
(1.685" O.D., 1.560" I.D., 0.500" wide)
USA made
$24.50
Gasket Set (For CKS053)
Replaces: G46872
USA made
CKS061
CKS070
CKS2382
CKS2384
CKS2378
$31.70
$299.95
$4.50
$4.50
$4.50
Exhaust Adaptor
Replaces: G2095, D73198
(6-1/8" tall)
NOTE: For 2-1/2" muffler.
Exhaust Manifold (Gas)
Fits: 730 gas, 830 gas, Loader:
Serviceable for 700, 800 gas
Replaces: Replaces: A20867, A11250
NOTE: The 830 exhaust outlet pipe
is 2-1/2" & the 800 exhaust is 2-1/4".
Customer must use a new muffler
(CKS1777) for a 700 & 800.
Intake Manifold Gasket
Fits: 400 gas (2 used); 600 LP (3 used);
700, 730, 800 gas (2 used); 900 LP,
Early 930 up to 1964 gas (3 used)
Replaces: A7363, 1349068C1
(2.253" O.D., 1.535" I.D., 0.095" thick)
NOTE: Sold individually. See
Exhaust Manifold Gasket
Fits: (L, LA intake 2 used), 400 gas,
diesel (4 used); 500 diesel, 600 LP,
diesel (6 used); 700, 730, 800 gas (4
used); 900 gas, diesel (6 used); Early
930 gas up to 1964 (6 used)
Replaces: O1437AB, O9815AB,
A27909, 1349071C1
(2.506" O.D., 1.786" I.D., 0.085" thick)
NEW! Intake Manifold Gasket
Fits: 400 series diesel (2 used); 500, 600
diesel (3 used); 830 gas (2 used); 900
diesel (3 used), Replaces: O9814AB,
A29943, 1349075C1
(2.254" O.D., 1.720" I.D., 0.095" thick)
Manifolds, parts continue on next page
67
Engine parts
Price
$162.50
Case
CKS053GK
Manifold nuts cont...
Engine parts
Case
Order #
Price
$250.00
CKS042GK
$38.00
CKS001B
$144.50
CKS014
$68.50
CKS001GK
$31.80
Order #
CKS042
2-Piece Exh Manifold
Fits: 930 diesel, LP, 1030 diesel
Replaces: A24714, A24715
CKS016
$3.95
Center Manifold fits: 1170, 1175, 1270,
1370, 1470, 1570, 2290, 2294, 2390,
2394, 2470, 2590, 2594, 2670, 3294,
3394, 3594, 4490, 4494, 4690, 4694, 451,
504" diesel engine
NOTE: Also fits Industrial apps. See
Manifold Nut
Fits: RC, SC series using 3/8"-24 NF Nut
(3/8" - 24 NF)
NOTE: Brass. Sold individually.
ABC2290
$0.95
Manifold Nut
Fits: V, VC, VAC, 200B thru 630 gas, LP,
diesel, Replaces: VT3362
(3/8" - 16" NC)
NOTE: Brass. Sold individually.
Gasket material - USA made
Order #
Price
ABC448
$17.90
ABC1830
$13.95
Cork / Rubber Rollpack Gasket Material
For making general purpose gaskets
(1/16" thick x 12" wide x 24" long)
NOTE: Do not use for high temperature
applications.
ABC1835
$10.95
Cork / Rubber Rollpack Gasket Material
(3/32" thick x 12" wide x 24" long)
applications.
ABC1844
$15.95
Gasket Paper
(0.0160" thick x 18" wide x 98" long)
applications.
Turbocharger to Exhaust Manifold
Mounting Gasket
Fits: Same as CKS001B
Replaces: A58899 USA made
NOTE: See website for full
applications.
ABC1846
$22.95
Gasket Paper
(0.0275" thick x 20" wide x 108" long)
applications.
Piston ring sets - USA made
Do not order by tractor model only. To ensure you order the
correct rings, you will need the following information:
Price
$1.75
Bore size
2
Thickness of
each ring
3
Quantity of each ring thickness
per piston.
Piston rings can not be returned if opened. Call or email for
price and availability of other sizes.
Manifold nuts
68
Exhaust Manifold Gasket Material
(1/16" thick x 12" wide x 28-1/2" long)
NOTE: Perforated steel core.
$94.50
1
Order #
End Manifold
Fits: Same as CKS001B
Exhaust Elbow
Fits: 1470, 1570, Industrial
applications. Close out.
ABC1878
$0.95
Gasket set (diesel only)
(For CKS042)
Replaces: A34875
USA made
Gasket Set (For CKS001B)
Replaces: A58895 (manifold), A58899
(turbo gasket) USA made
ABC2511
Price
ABC2286
Manifold Nut & Lockwasher
Fits: CC, DC series, 400, 500, 600, 700, 730,
800, 830, 900, 930 series gas, diesel
Replaces: 25-117
(7/16" - 20 NF) NOTE: Brass nut, yellow
zinc lockwasher. Sold individually. 6 or
more used per tractor.
Order #
Price
Application
Fits: CC, DC series 4-cyl.
Replaces: 3721AA
ABC2080
$98.50
ABC2080: 3-7/8" bore, (3) 0.125"
compression rings, (1) 0.250" oil ring
Piston ring sets - USA made cont...
Order #
Price
Piston ring sets - USA made cont...
Order #
Application
Price
Application
Fits: Some CC, DC, 400, 680, 700, 730,
800 series gas, LP, diesel 4-cyl.
Replaces: A8086
$79.50
ABC2082: 4" bore, (3) 0.093" compression
rings, (1) 0.250" oil ring
ABC2150
$78.50
ABC2150: 4-1/4" standard bore, (3) 0.093"
Fits: Some 400, 420, 680, 700, 730, 800
series gas, LP, diesel 4-cyl.
Replaces: A40364
$78.50
ABC2090: 4-1/8" bore, (3) 0.093"
Fits: Some 930, 931, diesel 6-cyl.
ABC2152
$104.55
Fits: Some R, RC 4-cyl.
ABC2166
$69.95
ABC2084
$94.50
ABC2084: 3-5/8" bore, (3) 0.093"
ABC2172
$122.75
ABC2172: 3-5/8" bore, (3) 0.125"
NOTE: Sold as pair for one cylinder.
Order #
Price
ABC2107
$3.50
ABC2115
$8.95
Fits: Some V, VC w/ F124 Continental
engine
ABC2110
$94.50
ABC2110: 3-3/16" bore, (3) 0.125"
ABC2184
$111.50
ABC2184: 3" bore, (3) 0.125" compression
rings, (1) 0.250" oil ring
ABC2162
$78.50
ABC2162: 3-3/16" bore, (3) 0.125"
Fits: Some 200, 210B, 211B 4-cyl.
ABC2152: 4-1/4" bore, (3) 0.093"
Sleeve sealing o-rings
ABC2166: 3-1/4" bore, (3) 0.125"
Fits: 'Some' S, SC series 4-cyl.
Engine parts
ABC2090
Case
ABC2082
Fits: Some Super 400, 700, 730, (800
diesel), 830 gas 4-cyl.
Application
Fits: VAC, 200B, 300B, 400B, 430, 470, 480,
530, 570, 580 gas, LP
Replaces: VT3375, G46909
(0.100" thick)
Fits: 430, 470, 480, 530, 570, 580 series
(All w/ 188" diesel engine); 630 gas,
diesel, Replaces: G46888, A44003,
14461280
(0.100" thick) USA made
Engine overhaul kits
Inframe or out of frame kits are available by
special order for VAC, 300 thru 4694.
For price and availability call, or visit
Special Order Parts under Shop Online on
our website.
Engine gasket sets
NOTE: Includes all gaskets and crankshaft seals for major
ABC2112
$119.95
ABC2112: 3-1/8" bore, (3) 0.093"
compression rings, (1) 0.250" oil rings
Fits: 'Some' VAC, 300, 310, 320, 400B,
420B, 430, 470, 480, 1835 4-cyl. gas, LP
Replaces: G1116
ABC2072
$121.75
overhaul (unless otherwised noted).
Order #
Price
CKS2390
$154.50
ABC2072: 3-7/16" bore, (3) 0.093"
compression rings, (2) 0.187" oil rings
NOTE: On engines w/ 4 piston rings,
discard 1 oil ring per cylinder.
Application
Fits: S, SC series
Replaces: 3598AA, A189555
USA made
NOTE: Includes front crankshaft seal.
Engine gasket sets continue on next page
69
Engine gasket sets cont...
Valve cover gaskets
USA made
NOTE: Includes all gaskets and crankshaft seals for major
overhaul (unless otherwised noted).
Order #
Price
ABC1338
$138.95
Case
Fits: V, VC, VI, VO, Terra Trac Crawler
(All w/ F124, F140, F162 flathead
Continental gas engines)
Replaces: F4U01007, F4U3004, F400500
CKS1321
Engine parts
Order #
Application
$164.95
Price
CKS2595
$15.50
Replaces: O1594AB, O1594AB2, A26562
CKS2603
$16.95
Fits: S, SC series, Replaces: O5764AB
CKS1689
$16.95
Fits: VA series, 200, 300, 400B, 430, 470,
480, 500B, 530, 580, 600B gas, LP
Replaces: VT3246, A30009, A30263,
A43021, G10267
CKS1697
$14.95
Fits: 320, 430, 470, 480, 530, 570, 580, 630
series (All w/ 188 or 207" diesel engine)
Replaces: G46866, A43030
Fits: VA, VAC, VAH, VAI, VAO, VAS
Replaces: VTA814, VTA871
USA made
CKS1947
$181.35
Camshaft, parts
Fits the following models w/ 188" diesel
engine SN 2656844 & up & 207" engines:
310D thru 350B, 420 thru 480D, 530 thru
586D, 630, Replaces: A143000, A43198,
A44758 USA made
Order #
Price
NOTE: Includes all gaskets needed when replacing the cylinder
head (unless otherwised noted).
Order #
Price
$109.95
$167.50
CKS123
$8.95
EACH
CKS2759
$32.95
NEW! 3-piece Camshaft Bearing /
Bushing Set fits: VAC thru 580C gas, LP
(All w/ 126, 148, 159, 164" engines)
NOTE: See website for full applications.
CKS2755
$29.95
NEW! 5-piece Camshaft Bearing /
Bushing Set fits the following tractors /
backhoes: 320 Dsl. 420 Dsl., 420B, C, Dsl.,
430 thru 586D Dsl., 630, 1740 Dsl. thru
1845; Crawlers: 310E, F & G Dsl., 350 Dsl.,
350B Dsl., 450, 450B, 455B (All w/ 188
gas, diesel 201 gas, 207 diesel engines, gas
will not use the rear bearing)
Replaces: A151068, A41230, A41231
USA made NOTE: See website for full
applications.
Application
(All w/ 260" engine)
Replaces: 4056AA, A189556
NOTE: Water inlet gasket not included.
CKS1671
$84.00
NEW! Fits: S, SC, SI, SO
Replaces: 4057AA
CKS116
MHS071
70
$72.95
$59.95
Replaces: VT3312, VT3228, VT3379,
VT3394, VT3246
USA made NOTE: Includes all gaskets
needed when replacing the cylinder
head.
Fits: VC, Terra Trac Crawler (All w/ F124,
F140, F162 Continental flathead)
Replaces: C400K215, F400A335, F400E303,
F124A201, X334
USA made
CKS120
Valve grind gasket sets
CKS2052
Application
Camshaft fits: 310D thru 586D
(All w/ 188, 207" diesel engines)
Replaces: A2111, A36853, A39013,
A153521
Lifter
Replaces: G47077
Crankshafts, parts
NOTE: Bearings not included. Measure bearings before
ordering, no returns if package has been opened.
Order #
CKS064
Price
$450.00
Crankshaft fits: 148" gas up to 1960, 200,
300, 310, 320 (All up to 1960)
Replaces: G11164, Casting # G10071,
G11700, G11701 (Rear main seal = 3.375"
• Rod bearing dia. = 1.9365")
NOTE: Will not fit tractors w/ block
G1235. For bearings see CKS1964,
ABC1962.
Order #
CKS2688
ABC2831
$650.00
$13.50
Order #
Crankshaft fits: 310D thru 310G, 350, 430,
480, 530, 580, 600B series (All w/ 148B,
159, 164" gas engines, 1960 & up)
Replaces: A37210, G11183, G11708,
G11709, 967731 (2.061" std. rod journals,
2.624" std. main journals) USA made
NOTE: New old stock. Splined rear
flange.
ABC2364
$8.50
2-piece Rear Crankshaft Seal
Fits: V, VC, Terra-Trac w/ F124, F140,
F162 Continental engine
Replaces: D600B217
(4-3/4" long) USA made
NOTE: Graphite coated, 'Jute' yarn.
ABC1632
$12.95
Front Crankshaft Oil Seal fits: V, VA, VI,
VO, VC, 200, 300, 400B, 430, 500B, 530,
600B, 630 series gas, diesel (All w/ 124,
148, 159, 164, 188, 207" gas, diesel), (Terra
Trac Crawler gas Continental engines
when used as a front crankshaft seal)
Replaces: VT3373, A36609, A39110,
A600L202 (2.125" I.D., 3.001" O.D.,
.434" width)
ABC2056
$9.95
ABC2841
$19.95
MHS010
$68.50
Crankshaft fits: 188" diesel Crawlers:
310D, 310E, 310F, 310G, 350, 350B, 420C,
450; Tractors & Backhoes: 320, 430, 470,
480, 480B, 480C, 480D, 480LL, 530, 531,
570, 580, 580B, Forklifts: 440, 584, 584D,
585D, 586, 586D; Skid Steers: 1700, 1740,
1835, 1835B, 1845, 1845B, 1845S; Rollers:
752; Loaders: W3, W5A
Replaces: A39146, A37211, A39151,
A151015, G11189, G11740, G11741
NOTE: For applications WITHOUT
PTO, No splines in flange. For bearings
see CKS1956, CKS1958.
Crankshaft fits: 207" diesel, 450B, 455B,
580C, 580D, 584C, 585C, 586C, W11
Replaces: A51917, A144011, 976321
NOTE: No splines in flange. For
bearings see CKS1958, CKS1960.
Price
NEW! Front Crankshaft Seal
Fits: S, SC series
Replaces: O5727AB, 336342A1
(2.004" O.D., 1.125" I.D., 0.250" width)
Application
Engine parts
CKS063
$650.00
Application
Case
CKS059
Price
$595.00
Rear Crankshaft Seal
Fits: VAC, 200B, 300, 310, 320 (All up to
1960), Replaces: G10005, G13825
(3.375" I.D., 4.381" O.D., .500" width)
NEW! Rear Crankshaft Seal
Fits: 350, 430, 480, 500B, 530, 580, 600B,
630 gas, diesel, Replaces: A51339
(5.004" O.D., 4.000" I.D., 0.500" width)
NOTE: See website for full applications.
2-Pc Rear Main Seal fits: 1000, 1000C,
1000D Dozer w/ JD382 Continental
engine w/ bolt-on style rear seal
NOTE: Must drill & tap block & main
cap for bolt on seal
Crankshaft bearings - USA made
NOTE: Measure bearings before ordering, no returns if package has been opened.
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Order #
Price
Description
Applications
Replacement number(s)
The following fit VA, VAC series, 200B, 300, 300B, 310, 310C, 320, 320B, 420, 420B (All w/ connecting rod VT3200 or VT4538 &
124, 126, 148" gas engines up to 1960) (4 required for overhead valve engines)
ABC1962
$17.25
Standard Connecting Rod Bearing (For 1.936" standard rod journal)
NOTE: Fits CKS064 crankshaft.
F600G312, G11141
ABC2522
$17.25
Connecting Rod Bearing (For 0.010" (1.926") undersize rod journal)
F600G312LL
ABC2526
$17.25
G11143
The following fit VC series (For cylinders #1, 3)
ABC1962
$17.25
Standard Connecting Rod Bearing (For 1.936" standard rod journal)
F600G312
ABC2522
$17.25
F600G226LL
ABC2526
$17.25
F600G226NN
Crankshaft bearings continue on next page
71
Crankshaft bearings - USA made cont...
NOTE: Measure bearings before ordering, no returns if package has been opened.
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Engine parts
Case
Order #
Price
Description
Applications
Replacement number(s)
The following fit VC series (For cylinders #2 & 4)
ABC2516
$17.25
Connecting Rod Bearing (For standard (1.936") rod journal)
F600G226
ABC2518
$17.25
F600G226LL
ABC2520
$17.25
F600G226NN
The following fit the following models w/ 126, 148" engines: 200B, 210B, 211B, 300, 300B, 310, 310B, 310C, 311, 311B, 312, 320,
320B, 400B, 420, 420B
CKS1964
$194.95
Standard Main Bearing Set (For standard 2.250" main journal)
NOTE: Includes thrust washers. Will fit CKS064 crankshaft.
G11012, G11018,
G11036
The following fit 430, 470, 480, (480B,C,D), 530, 570, (580B,C), 630 (All w/ G148B using rod # G11176); G159, G188B, G188D gas,
LP, diesel (1960 & up)
CKS1956
$54.95
Standard Connecting Rod Bearing Set (set of 4) (For 2.062" standard rod journal)
NOTE: Complete set for engine. Fits CKS059 crankshaft.
A36500
CKS2528
$14.95
G37022, A36502,
A46052
CKS2530
$14.95
G11984, A36503,
A46053
The following fits 450B, 455B, 580C, 580D, 584C, 585C, 586C, W11 (All w/ G207 diesels)
CKS1960
$49.95
Standard Connecting Rod Bearing Set (set of 4) (For 2.249" standard rod journal)
NOTE: Complete set for engine. Fits CKS063.
A50975, A51915
The following fit (310D, E, F, G), 320, 350, 350B, 420, 420B, 420C, 430, 450, 450B, 455B, 470, 480, (480,B,C,D), 530, 570, (580,B,C,D),
(584,C,D), (585C,D), (586,C,D), 630, 1700, 1740, (1835,B), (1845,B), 660 Combine, 752 Roller, W3, W3A, W5, W5A (All w/ G188D,
G207D diesel)
CKS1958
$108.75
Main Bearing Set, 2.874" standard (Set of 5) (For 2.874" standard main journal)
NOTE: Fits CKS059, CKS063 crankshafts.
A36480, A36485,
A36490, A36495
CKS2786
$108.75
NEW! Main Bearing Set (Set of 5) (For 2.864" (0.010") undersize main journal)
A36482, A36487,
A36492, A36497
CKS2788
$108.75
NEW! Main Bearing Set (Set of 5) (For 0.020" (2.854") undersize main journal size)
A36483, A36488,
A36493, A36498
Oil caps
Order #
ACS178
(Without
Clip)
IHS406
(With
Clip)
72
Oil caps cont...
Price
Order #
$38.50
$38.50
Oil Fill Breather Cap w/ Clip & Copper
Filter Element fits: VA series, 200, 300
series, 420B, 420 Crawler, 430, 500B, 530,
600B Loader: W3, W5, W5A
Replaces: VT3545, A36608
(3-1/4" tall) USA made
NOTE: E-coated black. "OIL" stamped
into top. Fits over 1-1/2" pipe. Exact of
original.
Price
JDS500
$32.50
ABC042
$12.95
Oil Fill Breather Cap w/ Clip & Copper
Filter Element fits: Same as IHS406,
ACS178, Replaces: VT3545, A36608
(1-1/2" tall) USA made
NOTE: E-coated black. "OIL" stamped
into top. Fits over 1-1/2" pipe. Exact of
original.
Oil Fill / Breather Cap w/ Clip & Filter
Element fits: Same as IHS406, ACS178
(1-1/2" tall)
NOTE: Economy style.
Oil pan drain plug, gaskets
Order #
Price
$7.95
ABC540
$2.95
$1.75
Oil Pan Drain Plug fits: VA, VAH, VAI,
VAO, 200B, 300B, 310, 320B, 420B, 430,
500B, (530 up to SN: 8262800 gas only),
Following gas, diesel: 600B, 630
Replaces: VT4521
(7/8"-18 UNF) USA made
Washer / Gasket (For ABC539)
Replaces: VT4520 USA made
NOTE: Copper.
Engine Oil Pan Drain Plug Gasket /
Washer fits: 430 thru 570 (All SN: 8262800
& up), 'some' 480 thru 1570
Replaces: A51759 (0.750" I.D., 0.058" thick,
0.973" O.D.) NOTE: Made of nylon.
CKS1667
$12.95
ABC2429
$19.50
CKS1847
$14.95
Oil Pan Gasket fits the following models
w/ 124" engine: VA, VAC, VAH, VAI, VAO,
VAE, VAS, Replaces: VT3245, A30440
USA made
CKS1853
$14.95
w/ 126 & early 148" gas engines up to 1960
(All w/ standard clutch only): 200, 210,
211, 300, 310, 311, 312, 320, 350, 420, 420C,
500B, 510B, 511B, Replaces: G11010, G10020
USA made
CKS1850
CKS1845
$24.95
$14.95
Order #
Price
ABC006
$19.95
ABC007
$9.85
ABC047
$14.85
Price
ABC521
$14.95
Fits: VA series, 200, 300, 301, 310, 311, 350D;
400B, 500B, 600B series w/ Case engine
(All w/ spin-on filters)
(4-5/8" tall)
NOTE: Threaded neck type can.
Fits: Late 310 (11 / 59 up), 310 diesel, 420C,
430, 470, 480, 530, 570, 580, 630 gas, diesel;
680, 770, 870, 970 (All w/ spin-on filters)
Replaces: A37189, G45210
(5-1/4" tall, 3.675" O.D.)
Fits: 680, 730, 750 Dozer, 830, 850
(All w/ cartridge filters)
Replaces: A21475
(4-3/4" tall, 3-15/16" wide)
Oil Pan Gasket fits: S, SC, SI, SO
Replaces: A20630, O5743AB, O5744AB
USA made
Oil Pan Gasket Set fits: V, VC, Terra Trac
Crawler, Replaces: F400B-401 USA made
NOTE: Using flathead engine.
w/ late G148B or 159" gas engine 1958 &
up (All w/ standard clutch): 400B, 430, 440,
470, 480, 530, 540, 570, 580, 600B
Replaces: A40710, G11826 USA made
Flywheel ring gears
Order #
Price
ABC478
$78.50
CKS1935
$89.95
w/ G188, G207" diesel engines: 430, 431,
440, 441, 470, 530, 531, 540, 541, 570, 630,
640, Replaces: A35299, A40712, A44758,
A51891, A40713, G11951
Application
Fits: D, S series, LA, LAI, VC, VH, VI, VO
Replaces: O8926AB, 8152AB, VT2427
(4-1/4" L x 3-1/2" W)
Application
Fits: VC, Terra Trac Crawler (All w/ F124,
F140, F162 flathead Continental engines)
Replaces: 155C309, Continental C400C305
(12-1/8" I.D., 13-1/8" O.D.)
NOTE: 103 teeth.
Fits: D, DC series, S, SC series
Replaces: O5565AB
(12.160" I.D., 14.164" O.D.)
NOTE: 112 teeth.
Muffler clamps
Fits: V, VA, VAC, VC gas, 200B, 300B, 310,
350, 400B, 500B, 600B
Replaces: VT3864
(Fits pipe O.D. of 1.850" - 2.000" range)
Oil filters - USA made
Order #
Application
Engine parts
ABC1955
Description
Order # Price
2" Chrome Clamp......................................................ABC327............ $9.95
NOTE: Original style. Fits CKS106 muffler.
2" Stainless Steel Clamp..........................................ABC2519.......... $14.95
NEW! 2" Painted Steel Clamp.................................ABC2625.......... $8.50
Muffler clamps continue on next page
Case
ABC539
Oil filters - USA made cont...
73
Muffler clamps cont...
Mufflers - USA made cont...
Fits: 530, 540, 570, 630, 640, 730, 830
(Fits pipe O.D. of 2.350" - 2.550" range)
Description
Order # Price
Order #
Price
CKS128
$31.80
Engine parts
Case
2-1/2" Chrome Clamp...............................................ABC351............ $9.95
NOTE: Original style. Fits CKS1773 & CKS1777 mufflers.
NEW! 2-1/2" Painted Steel Clamp..........................ABC2627.......... $8.50
Order #
Price
ABC568
$2.95
(1-1/2" clamp)
ABC570
$2.95
(1-5/8" clamp)
ABC572
$2.95
(1-3/4" clamp)
ABC574
$3.25
(1-7/8" clamp)
ABC576
$3.25
(2" clamp)
NOTE: Use w/ CKS106.
ABC578
$3.25
(2-1/4" clamp)
NOTE: Use w/ CKS109, CKS128.
ABC580
$3.25
(2-1/2" clamp)
NOTE: Use w/ CKS109, CKS1773.
ABC583
$4.95
(2-3/4" clamp)
ABC585
$4.95
(3" clamp)
ABC2234
$4.95
(3-1/2" clamp)
ABC1771
$7.95
(4" clamp)
CKS1773
$35.25
Dimension
CKS2243
$59.95
Fits: 480B thru 480D, 580B thru 580D, 584C
thru 586D gas, diesel
Replaces: A39561
NOTE: Black finish.
CKS2243 (Vertical round body) dimensions:
Inlet length: 5-1/2", Inlet I.D.: 2-1/2", Shell
length: 19", Outlet length: 8-1/2", Outlet O.D.:
2", Overall length: 33"
$35.25
Mufflers - USA made
Order #
Price
$38.95
Application
Fits: C, CC, D, DC, DI, DC-4, 400 gas,
diesel, 700, 800 gas, diesel
Replaces: A9215, A11871, A20494
NOTE: Silver finish.
Inlet length: 3", Inlet I.D.: 2-1/4", Shell length:
17", Shell diameter: 4-1/4", Outlet length: 6",
Outlet O.D.: 2-1/4", Overall length: 26"; If
raincap is needed order RCS006. If clamp is
needed order ABC578.
CKS106
$32.95
Fits: V, VA, VAC, VC gas, 200B, 300B, 310,
350, 400B, 500B, 600B
Replaces: G45727, VTA1135, VTA2811
length: 16-3/4", Shell diameter: 3-1/4", Outlet
length: 9-1/2", Outlet O.D.: 2", Overall length:
29"; If raincap is needed order RCS005. If
clamp is needed order ABC576 or ABC327.
74
Fits the following gas, diesel: 530, 531, 540,
541, 570, 580, 630, 640, 641, W3 Industrial
Replaces: G45239, A39022
2-1/2", Overall length: 29"; If raincap is needed
order RCS007. If clamp is needed order
ABC351 or ABC580.
CKS1777
CKS109
Fits: S, SC, SI
Replaces: O6417AB
length: 16-1/2", Outlet Length: 7", Outlet
O.D.: 2-1/4", Overall Length: 26", If raincap is
needed order RCS006. If clamp is needed order
ABC578.
2" Chrome Clamp......................................................ABC2521.......... $16.95
Economy muffler clamps
USA made
Application
830, 831, 840, 841
Replaces: A24314, A23476, A21464
CKS1777 (Vertical or Horizontal) dimensions:
2-1/2", Overall length: 29"; If raincap is needed
order RCS007. If clamp is needed order
ABC351 or ABC580.
CKS1783
$42.45
941, 1030, 1031; Industrials: W8B, W8E,
W9B, W9C, W9E, W10B, W10C, W10E
Replaces: T42286, A24103, A27105
CKS1783 (dimensions: Inlet length: 3", Inlet
I.D.: 2-3/4", Shell length: 17", Outlet length: 12",
Outlet O.D.: 2-3/4", Overall length: 32";
If clamp is needed order ABC583.
Raincaps
Carburetors, parts cont...
Order #
Order #
Price
Price
$498.50
ABC297
$7.50
Carburetor Fuel Inlet Elbow & Strainer
Assy. fits: Case models
(Male end (screen end) - 1/8" pipe thread;
female end - 1/4" flare) NOTE: Must have
internal threads. Used w/ flair fitting;
NOT compression fitting.
ABC564
$26.40
Main Jet Adjustment Needle Assy.
(For Zenith carburetors) fits: C, D series
(All w/ carb 08964, A, B); R series w/ carb
10136, S series w/ carb 09667A (3/8"24 thread) USA made NOTE: Also fits
570, 580, 580B, 1845 to eliminate electric
solenoid.
ABC557
$29.95
Application
(1-1/4" - 1-7/16" I.D.)
RCS003
$9.80
(1-1/2" - 1-11/16" I.D.)
RCS004
$9.95
(1-3/4" - 1-15/16" I.D.)
RCS005
$10.35
(2" - 2-3/16" I.D.)
RCS006
$10.75
(2-1/4" - 2-7/16" I.D.)
RCS007
$10.95
(2-1/2" - 2-11/16" I.D.)
RCS009
$13.35
(3" - 3-3/16" I.D.)
RCS015
$41.95
(3" I.D.) USA made
NOTE: Chrome plated.
RCS016
$45.95
(3-1/2" I.D.) USA made
NOTE: Chrome plated.
Choke parts
Order #
ABC423
JDS718
ABC2426
Price
$9.95
$18.75
$7.50
Application
Universal Choke Cable
Fits: Tractors, Forklifts & other applications
using 72" or less cable NOTE: Metal
sheathed. Cut to length. Can also be used
as a 'Stop' cable for diesel engines.
Universal Choke Cable
Fits: Tractors, Forklifts & other applications
using 47"or less cable
(47" long) NOTE: Metal sheathed w/
"CHOKE" on knob. Cut to length.
Choke or Fuel Shut Off Cable Clip
(For Marvel Schebler choke cable bracket)
Fits: VC, VAC thru 830; Also works for
diesel fuel cable shut off for 770 thru 4890
Replaces: B51765
NOTE: See website for a complete listing
of applications & carburetor numbers.
Main Carburetor Nozzle
(For Zenith carburetors)
Fits: R, RC, RI (All w/ carb 10136, 10146)
Replaces: C66-47-50 USA made
ABC230
$6.45
VITON Needle Float Valve
(For Marvel Schebler carburetors)
Fits: V, VA, VAC, 200, 300, 400B, 600B (All
w/ TSX 43, 114, 253, 597, 635, 663, 680, 696,
749, 804, 936), Replaces: 233-536
(.080 orifice) USA made NOTE: Viton
needle & seat helps stop carb flooding.
ABC133
$6.15
VITON Needle Float Valve
Fits: D w/TSX11, 400, 540, 630, 700, 730,
800, 830 (All w/ TSX 616, 780, 782, 785,
794, 798, 799), Replaces: 233-543
(0.100" orifice) USA made
NOTE: VITON needle & seat helps stop
carburetor flooding.
ABC513
$2.50
Throttle Body Repair Bushing (For small
bowl Marvel Schebler carburetors)
Fits: V thru 480 series (.383" O.D., .247"
I.D., .501" long) USA made
NOTE: Repairs worn throttle body using
1/4" throttle shafts. Must ream to size.
ABC424
$1.39
Carburetors, parts
Can't find your carburetor number? Look on page 321.
Carburetors are limited to replacement only - NO refunds.
No replacement will be given if dirt, rust, etc. is found in the
carburetor or if it has been taken apart.
Order #
Price
ABC223
$358.90
Carburetor NEW, Zenith Replacement
Fits: SC, SI, SO, V series, VA series
Replaces: TSX 42, 43, 74, 114, 212, 253, 474,
513, 668 (2-5/16" c.c. stud holes)
USA made NOTE: Has 1-1/8" throttle
bore. May have to trim throttle shaft on
some applications. Will fit 2-5/16" - 2-3/8"
c.c. stud holes because of the smaller dia.
studs that are included.
Engine parts
$9.65
Carburetor (Down Draft)
Fits: David Brown 885
Replaces: 341VN USA made
NOTE: Looks different, works great!
If carburetor gasket is needed order
ABC416.
Case
RCS002
IHS377
Manifold to Carburetor Gasket
Fits: C, CC, D, DC, 400, 700, 800 series
Replaces: O889AB1, 1349074C1
(2-11/16" c.c. bolt holes, 1 1/2" center hole)
NOTE: Perforated steel core.
Carburetors, parts continue on next page
75
Carburetor floats cont...
Carburetors, parts cont...
Engine parts
Case
Order #
Price
ABC408
$1.39
ABC2275
$3.95
Order #
Manifold to Carburetor Gasket
Fits: S series, VC, VAC, 200, 300, 310, 320,
430, Replaces: O562AB
(2-3/8" - 2-7/16" slotted bolt holes,
1-1/8" center hole) USA made
Carburetor Gasket Kit (For Big Bowl
Marvel Scheblers) fits: Some 530 thru 630
series, Replaces: B51729
USA made NOTE: Fits same carb
numbers as FDS212 economy kit.
ABC452
Price
Fits: SC, 300B, 400B, 430, 470, 480, 480B, 500,
500B, 530, 570, 580, 580B, 600, 600B, 630,
770, 870; Industrials: W5, W5A, W7E; Skid
Steer: 1845 (All w/ carb 12509, 12534, 12675,
12913, 13106, 13109, 13328, 13338, 13374,
13390, 13612); Power Units w/ carb 11535,
A, 13048, 13107, 13108, 13348, 13783
Replaces: B51359
ABC1355 $22.80
(For Zenith 63-11, 63-12 & 69 series
carburetors) fits: 870 w/ 13598,
930 w/ 12978, 970 w/ 13478
Carburetor floats
Order #
IHS575
Price
Application
$23.60 (For Zenith carburetors)
Application
$78.50
(For K6A Zenith carburetors)
Fits: L, LA, LI (All w/ carb 6799, 8714)
Carburetor repair kits
Can't find your carburetor number? Look on page 321.
Economy carburetor repair kits contain: Needle & seat, float
ABC036
ABC361
ABC037
$11.95
(For small bowl Marvel Schebler
carburetors) fits: V, VA series (both w/ TSX
225); VAC w/ TSX 513; 200, 300 series; (310
w/ TSX 957); 430, 440, 440B, 480, (All w/
TSX 42, 43, 74, 114, 212, 225, 253, 597, 633,
635, 680, 936); 500B, 600B, Power Units (All
w/ TSX 338, 409, 474, 597, 663, 696, 710, 762,
804, 936SL, 937, 937SL, 939SL)
Replaces: B51772, 30-600
lever pin, seal, gaskets & instructions.
Basic carburetor repair kits contain: Throttle shaft, needle &
seat, float lever pin, seal, gaskets & instructions.
Order #
Price
Economy carburetor repair kits - USA made
ABC222
$24.95
Economy Carburetor Repair Kit
Fits: C, CC (All w/ carb 7124, 8672)
$29.50 (For Marvel Schebler carburetors)
Fits: 400, 410B, 500B, 511B, 540B, 600B, 700,
730, 740, 840 (All w/ TSX 616, 749, 780, 782,
785, 794, 840, 863); Industrials: W5, W7,
W7C, W9A, 680CK; Power Units w/ TSX
11, 717, Replaces: B51773
ABC1348
$24.95
ABC1346
$25.70
ABC1349
$24.95
$19.95
Fits: 540, 541, 600, 640, 641 (All w/ TSX 798,
799, 854), Replaces: 30-739, B51776
ABC454
$35.75
ABC190
$15.75
76
Fits: C, CC, D, DC series, 400, 500B, 510B,
511B, 600, 600B (All w/ carb 8964, A, B,
12255, A, 12329A, 13902)
Replaces: C85-26
Fits: RC, S, SC, SI, Power Unit (All w/ carb
9667); VAC w/ carb S1162, 10136, 10146,
11106, 11506, 11699
Replaces: C85-28
Fits: C, CC, D, DC (All w/ carb 8964,
8964A, 8964B); 400B w/ carb 12329,
12329A); 500B, 600B (Both w/ carb 12255,
12255A, 12255C), Replaces: G45162,
G45719
Fits: R, S, VA, 300 series (All w/ carb
9667, 9667A, 10136, 11106, 11106A, 11506,
13902) NOTE: Fits 61, 68, 161 series
Zenith carbs.
Fits: SC, 300, 400B, 500B, 770, 870 (All w/
carb 11535, 12509, 12534, 13106, 13107,
13109, 13328, 13374, 13608)
Replaces: K2048, K2049, K2050, K2127 &
K2136
Carburetor repair kits cont...
Order #
Price
Carburetor repair kits cont...
Order #
Fits: V series w/TSX 42, 43, 74; VA series
w/TSX 114, 212, 225, 253, 597, 663; 200B,
311B (Both w/TSX 635); 310, 320 (Both
w/TSX 710); 310B (w/TSX 635, 804, 937,
937SL, 957SL); 312B (w/TSX 635 & 680);
440 (w/TSX 936, 936SL); Power Units (w/
TSX225, 409, 474, 762
ABC552
$21.95
Fits: 400, 700 both w/ TSX 616; 410B, 511B
(both w/ TSX 749, 780); 420C w/ TSX804;
730, 830 (both w/ TSX 782, 785, 794, 863);
D series w/ TSX616; DC w/ TSX11;
Power Units w/ TSX591, 717
FDS212
ABC340
$21.95
$38.75
Fits: 530, 540 (both w/ TSX 799); 600B, 640
w/ TSX 798
CKS1383
$38.95
Radiator, parts
Order #
CKS086
Price
CKS1390
ABC479
$42.95
Radiator
Fits: VA, VAC, VAH, VAI, VAO,
VAS, Replaces: VTA2688
CKS3142
$248.50
Fits: 500B, 510B, 511B, 530, 600B
(All w/ carb 12255) NOTE: Includes
throttle shaft, but shaft will not fit these
applications.
$35.95
Basic Carburetor Repair Kit
Fits: C, CC, D, DC, DI, DO (All w/ carb
8964)
(For Zenith K6A carburetors)
Fits: L series SN: 301843 & up, LA series
(All w/ carb 6799, 8714)
Replaces: O.E.M carb 01709AB2 &
04669AB
NEW! Radiator Core
Replaces: O7093AB, O10870A
(20-1/2" tall x 15" wide x 2-3/8"
thick) USA made
NOTE: Does not include
gaskets.
ABC473
CKS3134
$19.95
NEW! Radiator Core Gasket Pair
Fits: C, CC, D, DC, RC
Replaces: O687AB
USA made
ABC455
$2.95
FDS258
$3.60
$49.95
Fits: S, SC, SI, SO (All w/ carb 9667)
$37.75
Fits: V, VA, VAC, VAI, VAO (All w/ TSX
114)
$355.75
Basic carburetor repair kits
ABC477
Fits: V, VC, VI, VO (All w/ TSX 42, 43,
74)
Engine / Cooling parts
$22.50
Case
ABC220
Price
Basic carburetor repair kits cont...
Economy carburetor repair kits - USA made cont...
Radiator Mounting Pad
Fits: Case models
(2" x 2", 1/4" thick)
NOTE: 2 used per tractor;
Sold individually.
Clamp
(For 1-3/4" to 2" O.D. Radiator Hose)
Fits: Case models
ABC209
$2.95
Radiator Drain Plug
Fits: 310G thru 4690
Replaces: 217-103
(1/4"-18 NPT) USA made
applications.
77
Thermostats
Radiator caps, parts
Order #
CKS079
Price
$37.45
Price
IHS913
$34.95
ABC1086
$13.50
ABC1898
$19.95
Case
Radiator Cap (Cast) w/ Gasket
Fits: S, SC, SO, SI
Replaces: 2621AA
(2.667" tang to tang)
MHS043
Cooling parts
Order #
$9.95
Underside view
MHS043GK
Radiator Cap (Vented)
w/ MHS043GK Gasket
Fits: V, VAC, VAH, VAI, VAO, VC, VI,
VO (2-7/8" O.D.)
$1.50
Gasket only (For MHS043)
(2.622" O.D., 1.500" I.D., 0.100" thick)
NOTE: Rubberized cork gasket.
ABC052
MHS045
$12.95
Underside view
ABC008
(4 PSI)
Radiator Cap w/ Gasket
(For Non-Pressurized systems)
Fits: V, VA, VAC, VAH, VAI, VAO, VC
Replaces: G13271
(1.761" tang length)
$8.95
(For Pressurized systems)
Fits: 200B, 300 gas, diesel, 300B, 320B,
380CK, 400B, 420B, 430, 470, 480, 500B,
530, 570, 580, 600B, 630; David Brown:
770, 780, 880, 885, 990, 995, 996, 1200,
1210, 1212
Replaces: G45179, K906196, K945363
(2.330" O.D., 2.000" tang to tang, 1.500"
radiator neck I.D.)
CKS091
Price
$14.95
ABC1398
$5.95
Underside view
78
Fits: 400 - 425 series, 700, 730, 800, 830, 900
series, Replaces: A28114, Serviceable for
A11493 (160° Temp)
NOTE: Gasket not available thru Steiner
Tractor Parts, Inc.
Fits: Some 430 diesel - 4690
Replaces: A57641
(160º Lo-Temp) USA made
NOTE: Gasket included fits Ford models
only.
4 PSI Radiator Cap w/ Gasket
(For Pressurized systems)
Serviceable for 200B, 300B, 400B, 500B,
600B (All w/ SN: 6120001 & up); 430,
470, 480, 480B, 530, 570, 580, 580B, 630
(2.895" outer shell O.D.)
(For (7 PSI) Pressurized systems)
Fits: 885 thru 1694
Replaces: K945362, E81942
(2.330" O.D., 2.000" tang to tang, 1.096"
tall) NOTE: Fits radiators w/ 3/4" tall
filler neck.
$193.95
Water Pump
Fits: D, DC, DI, DO, DV
Replaces: B160AA, 2883AA, 5577A (water
pump body); A28456 (pump assy)
CKS097
$167.95
Water Pump
Fits: S, SC, SI, SO
Replaces: A48361
Underside view
ACS209
Fits: C, D, L series
Replaces: O8989AB
(180º Temp)
USA made
NOTE: New, no core charge.
Order #
ABC1396
(7 PSI)
Fits the following when 160º thermostat
is desired: C, CC, CI, CO, D, DC, DI, DH,
DO, Replaces: O3785AB, O8989AB
(160º Temp)
Water pumps, part
$8.75
Underside view
$11.50
Application
CKS108
$98.50
Water Pump
Fits: Some VA; VAC, VAH, VAI, VAO,
VAS w/ engine SN: 4700000 & up; 200;
Some 200B; 210, 210B, 300, 300B, 310,
310B, 310D, 310F, 320, 350, 351, 400, 400B,
430, 440, 500, 500B, 530, 540, 540C, 541,
600, 600B, 610, 611B (All gas w/ 2-3/4"
impeller dia. & casting # VT327, VT341,
A28860), Replaces: A148401, A48362,
G11956, VTA908 NOTE: 2-3/4" impeller
diameter. Will not fit Early VAC series w/
threaded impeller shaft.
Amp gauges w/ stainless steel bezel cont...
Water pumps, part cont...
Order #
Price
CKS118
$67.95
Water Pump to Support Casting Gasket
Replaces: G46875
USA made
Price
$12.25
ABC466
$14.95
Electric oil pressure switches
ABC1486
Price
ABC1648
ABC402
Price
$15.50
Electric Oil Pressure Switch
Fits: Case/IH MXM120 thru MXM190,
MXU110 thru MXU135 (All w/ analog
gauges), Replaces: 83934153
$17.55
Application
Fits: Case/IH STX275, STX325, JX80U,
JX90U, JX100U, MX240, 9170, 9180,
9270, 9280, 9370, 9380, other various
applications, Replaces: A189040,
AV10X1175, 3030103
(17/32" x 45-1/4")
ABC1605
$17.95
Electric Oil / Fuel Pressure Switch
Fits: Late 430, 530, 730, 830, 930, 1030
Industrials: 470 thru 780
Replaces: A13794
Fits: R & RC (Both w/ Waukesha FC9G
engine); V, VC, VAC, VAI, VAO (All w/
out generator), Replaces: O3782AB
(13/16" wide x 40-1/2" long)
Amp gauges w/ stainless steel bezel
$6.30
NOTE: Verify belt size before ordering.
Order #
(30-0-30)
Fits: C, D, L, R, S, V, VA series; 420, 425,
500, 600 ; 1000, W9 Industrials; Also fits
newer Case models w/out gauge cluster
USA made
NOTE: No logo.
(60-0-60)
Fits: CC thru 400 w/ Alternator system
USA made
NOTE: No logo.
Order #
Fan belts
Cooling parts / Gauges
$1.95
Water Pump
Fits: 430, 470, 530, 570, 630; Industrials:
310E, 310F, 310G, 350, 350B, 420C, 450,
450B, 480, 480B, 480C, 480D, 480LL, 580,
580B, 580C, 580D, 584, 584C, 584D, 585,
585C, 585D, 586C, 586D, 600, 660, 1835
Skid Steer, 1845, 1845S, W3, W5A
(All w/ 188, 207" diesel engines)
Replaces: A37758, A39074, A48363,
A146584, G11939
(3.135" O.D. impeller)
Order #
ABC109
Case
MFS2123
Oil pressure gauges w/ stainless steel bezel,
parts
NOTE: CKS Gauge has a metal base, glass lens & stainless steel
NOTE: CKS Gauges have a metal base, glass lens & stainless steel
bezel. Includes "CASE" name.
ABC Gauges have a chrome bezel & vary from original
ABC Gauges have a stainless steel bezel & vary from original
appearance. Does not include "CASE" name. For 2" diameter
hole.
hole.
Order #
Price
CKS076
$18.95
need to order (1) of the following fittings depending on the line
(20-0-20) fits: C, D, L, R, S, V & VA series;
Also fits newer Case models w/out gauge
cluster, Replaces: O3601AB
NOTE: Like original w/ Case logo.
ABC016
When ordering a dash mounted oil pressure gauge you will also
size to adapt your existing line to the gauge: ABC538, IHS626,
ABC2353, ABC2360.
Order #
Price
CKS1642
$29.95
$12.25
(20-0-20)
Fits: C, D, L, R, S, V, VA series
USA made
NOTE: No logo.
(0-30 PSI)
Fits: VA, VAC, VAH, VAI, VAO, V, VC, VI,
VO, 200B, 430 gas up to SN: 8262799
Replaces: VT-2249
(1/8" NPT male thread)
NOTE: Dash mount; Has Case logo.
Line adapter sold separately.
Oil pressure gauges continue on next page
79
Water temperature gauges w/ stainless steel
bezel
Oil pressure gauges w/ stainless steel bezel,
parts cont...
Order #
Price
ABC082
$18.95
NOTE: CKS Gauges have a metal base, glass lens & stainless steel
Case
(50 PSI)
Fits: 200B, C, D, L, R, S, V, VA series
NOTE: Dash mounted. No logo.
$24.50
Gauges
CKS075
ABC005
ABC Gauges have a stainless steel bezel & vary from original
hole.
(0-60 PSI)
Fits: C, D, L, R, S, 400, 500, 600; Also fits
Replaces: O4370AB, A31169
NOTE: Dash mount; Has Case logo.
$23.95
ABC2360
$3.95
ABC2353
$3.95
ABC538
IHS626
80
Price
CKS077
$29.50
CKS122
$29.50
ABC239
$27.25
ABC1593
$29.95
$18.95
(80 PSI)
Fits: CC thru 600 series
NOTE: Dash mounted. No logo.
ABC523
Order #
$13.40
$12.85
Oil Gauge Copper Line Kit
(For tractors using 1/8" x 6’ copper oil
line) (6’ - 1/8" line, (2) 5/16 - 24 UNF Nut,
(2) compression sleeves, (1) 1/8 - 27 NPTF
female to 5/16 - 24 UNF male adaptor)
NOTE: Use w/ ABC538 fitting.
Oil Gauge Adapter Fitting
Fits: 'Some' CC, DC, L, LA, R, RC, SC, VA,
VAC series
(1/8" pipe female to 3/16" tubing female)
NOTE: Brass.
Oil Gauge Adapter Fitting
Fits: 'Some' V, VC, VI, VO, 400, 500, 600
(1/8" pipe female to 1/4" tubing female)
Oil Gauge Fitting
For gauges w/out removable fitting
(1/8" pipe thread to 1/8" compression)
USA made NOTE: Brass. Use w/ ABC523
line kit. For gauges w/out removable
fitting.
Oil Gauge Fitting
For gauges w/out removable fitting
(1/8" pipe thread to 1/4" compression)
USA made
NOTE: Brass.
Fits: Some C, D, S, V, VA series; Also fits
Replaces: VT-2265
(60" lead w/ 5/8" - 18 U.F. end w/ 1/2"
NPT pipe bushing)
NOTE: Check length before ordering.
Has Case logo.
Fits: LA, 400, 420, 425, 500, 600
Replaces: O6161AB, O9991AB, O10416AB
(84" lead)
NOTE: Check length before ordering.
Has Case logo.
Fits: CC thru VAC, 200B thru 400
(110º - 230º temperature range, 90º pointer
sweep, 72" lead, 5/8-18 UNF w/ 1/2" pipe
bushing)
NOTE: Dash mounted; No logo.
Fits: CC thru VAC, 200B, thru 400
(60" lead, 5/8-18 UNF w/ 1/2" pipe
bushing)
NOTE: Dash mounted; No logo.
Tachometer parts
Order #
Price
ACS2803
$49.95
NEW! Tachometer Drive Assembly
Fits: Some 430, 470, 480, 530, 570, 580, 630,
W3, W5A series, Replaces: A36818, G45274
NOTE: Driven off of the generator.
12 & 45 tooth gears.
ACS2805
$24.95
NEW! Tachometer Driven Gear & Shaft
Fits: Same as ACS2803
Replaces: A36522
NOTE: For generator driven tach drive.
45 teeth. Count teeth before ordering.
ACS2809
$14.95
NEW! Tachometer Drive Gear
Fits: Same as ACS2803
Replaces: G46306
NOTE: For generator driven tach cable.
12 teeth. Count teeth before ordering.
Tachometer parts cont...
Order #
Price
ABC476
$49.95
FDS423
IHS697
$19.30
$15.95
unless otherwised noted
Tachometer Drive Assembly
Fits: Some 430, 480, 530, 580, 630, W3,
W5A gas, diesel NOTE: Driven off the
generator. count teeth before ordering,
14 & 43 tooth gears.
EO = Eyelet Opening
L = Length
Ground Cables (Non-Insulated)
2-Piece Tachometer Drive Gasket Kit
Fits: 430 thru 630
USA made
ABC401
$13.90
(2 Gauge, EO = 7/16", L = 6")
ABC411
$15.80
(2 Gauge, EO = 7/16", L = 9")
ABC405
$17.95
(2 Gauge, EO = 1/2", L = 13")
ABC1175
$17.30
(2 Gauge, EO = 7/16", L = 14")
ABC421
$22.50
(2 Gauge, EO = 3/8", L = 19")
Tachometer / Speedometer Cable
w/ Metal Sheath
Serviceable for 200B, 300B, 350, 400B, 500B,
600B, Replaces: G13022, G13023, G45393
(38-7/8" long)
ABC403
$25.85
(2 Gauge, EO = 7/16", L = 24")
ABC407
$16.99
(2 Gauge, EO = 3/8", L = 10-1/2")
ABC415
$15.40
(2 Gauge, EO = 3/8", L = 12")
ABC413
$19.15
(2 Gauge, EO = 3/8", L = 14-1/2",
90º terminal ends)
ABC1582
$12.15
(2 Gauge, EO = 3/8", EYELET BOTH
ENDS, L = 16-1/4")
ABC417
$18.50
(2 Gauge, EO = 3/8", L = 21")
NOTE: May have to drill eyelet hole
bigger on some applications.
ABC419
$19.95
(2 Gauge, EO = 3/8", L = 27")
Tachometer Cable w/ Metal Sheath
Fits the following gas: 430, 470, (530 SN:
8297801 & up), 570; Also fits the following
as a speedometer cable: 530 up to SN:
8262800, 630 gas, diesel, Replaces: G45230
(48" long)
$28.50
Tachometer Cable w/ Metal Sheath
Fits: 4690
Replaces: A135494
(61-1/4" long with square ends)
Insulated Battery Cables
Battery parts
Order #
Price
IHS721
$8.95
CKS2051
$2.50
Electrical outlet socket, parts
Order #
Price
ABC395
$24.95
Electrical Outlet Socket
(For implements w/ lights)
Fits: Case models
NOTE: 2 plated brass pins.
ABC1868
ABC2285
$19.95
Connector Plug (For ABC395)
Replaces: B50259
(3.045" long, .760" wide, .340" hole dia. for
wires) NOTE: Plated brass pins, wires
must be soldered or crimped.
Universal Battery Retainer J-Bolt (Pair)
Fits: Case models
Replaces: 198185A1, 393161R1
(5/16"-18" UNC x 10-3/4")
Clip, Quick Release Receptacle
(For Battery Door)
Fits: 430, 470, Replaces: A36042, L40219
USA made NOTE: 2 to 6 used per tractor;
Sold individually.
Fuse holder
Fits: 200B thru 1470
Replaces: A22874 (holder), A10958 (cap)
USA made
$4.95
Electrical Outlet Socket Boot
Fits: Tractors using single wire outlet
NOTE: 1 wire style. Does not fit ABC395.
Gauges/Electrical parts
MFS133
$9.50
Heavy Duty; Straight terminals
Case
ABC1822
Battery cables - USA made
Description
Order # Price
Fuse Holder.............................................................ABC389............. $10.95
NOTE: Rated at 20 AMP. Fits in 1/2" hole. See website for full
applications.
81
Ignition parts cont...
Wiring harnesses, part
NOTE: Wiring harness kits include light
wires and diagram. Cottom braided wires
w/ soldered & sealed terminals. Restoration
Order #
ABC500
Price
$14.95
Terminal Insulator Assembly (Square
style) fits: D, S series (All w/ Delco 1111411
vertical distributor); 200B, 300B, 400B,
500B, 600B w/ Delco 1111908, 1111909
Replaces: 120622, 817363, 1914142, 1914144
NOTE: Fits distributor housings w/ .300"
dia. hole w/ keyway
quality. Alternator conversion harnesses
also available by special order. Call or email
Electrical parts
Case
for a quote.
Order #
Price
CKS2256
$162.50
CKS2268
$162.50
Wiring Harness (For 6-volt generator
systems only) fits: D, DC series up to SN:
5600000 (All w/ cutout relay) USA made
systems only) fits: S, SC series up to SN:
CKS112
$148.50
systems only) fits: VA, VAC up to SN:
CKS2875
$325.85
NEW! Wiring Harness fits: 530, 530CK,
540, 541, 545 ALL up to SN: 8262800 gas,
LP (All using Autolite gauge panel &
original generator; not for Stewart Warner
gauge panel), Replaces: A35304, G44066
USA made NOTE: Will also fit 630 gas
except light wires.
ABC1897
$1.45
Rear Hood Support Plate Grommet
Fits: 930, 1030, 1090, 1170, 1175
Replaces: 49563, A27519, H53785,
O8920AB NOTE: 3 used per tractor;
Sold individually.
Coils / Resistors
ABC011
(6-volt)
ABC509
(12-volt)
$19.95
Distributor Coil (Metal Housing)
$19.95 & Mounting Bracket
Fits: Case models
ABC011 Replaces: Delco 1115379 & D502,
A40778
ABC509 Replaces: 1115380, U505, A41820
NOTE: ABC509 is internally resisted. See
ABC348
$57.10
ABC366
$7.75
ABC186
$9.80
Cigarette lighters
NOTE: Anodized aluminum knob engraved w/ the word
Price
ABC1862
$29.95
6-volt Cigarette Lighter w/ Socket
Fits: 200B w/ 6-volt system
Replaces: G46107
IHS949
$29.95
Order #
82
Price
$14.95
Dust Cover w/ Felt, Gasket & Washer
(For Delco-Remy w/ clip held cap)
Fits: (DC, SC with Delco vertical
conversion distributor 1111411), 200B,
300B, 400B, 500B, 600B (All w/ DelcoRemy Distributor w/ clip held cap)
Replaces: 1900119
Distributor Caps, parts
12-volt Cigarette Lighter w/ Socket
Serviceable for 300B thru 1200
Replaces: G13344, G13345, A24082, A24134
NOTE: Original style.
Ignition parts
ABC498
Universal 12-volt Voltage Resistor
(2-Terminal Style)
Fits: Case models NOTE: Used to step
down 12-volt battery. Limits voltage
to coil when using 12-volt battery. 1.5
OHMs on 6-volt battery to 4.0 OHMs for
12-volt battery. Resistor gets very hot.
Dust Cover
"LIGHTER".
Order #
HOT" Coil (55000-volts)
Fits: 12-volt systems
NOTE: Maximum voltage for faster
starting, reduced plug fouling & longer
plug life. Must use w/ ABC366 resistor.
Terminal Insulator Assembly (Round
style) fits: Some D, S series (All w/ Delco
1111411 vertical distributor)
NOTE: Fits distributor housings w/ .345"
dia. round hole.
ABC276
$9.50
Distributor Cap (For EARLY Delco
Distributor w/ clip held cap thru 1963)
Fits: DC, SC (Both w/ Delco 1111411
conversion distributor); 200B, 300B,
400B, 500B, 600B w/ Delco-Remy 4-cyl.
distributors w/ clip held cap
Replaces: 811735
ABC137
$15.50
Distributor Cap (For Autolite Distributor
w/ spring clips) fits: VA series, 200B,
300B, 320, 350, 400, 400B, 430, 440, 500B,
530, 600B, 630, 700, 800 (All w/ Auto-Lite
distributor), Replaces: A8368, IG1324D,
IG1324H, IG1324J (3-3/8" O.D.)
NOTE: Only fits Autolite Distributors w/
3-3/8" O.D. cap, Will not fit model IGZ or
IGW distributors.
Order #
Price
Order #
Distributor Caps, parts cont...
$2.50
ABC488L
(31/32"
Bracket)
$14.95
ABC3007
ABC2523
ABC511
(6-volt)
ABC514
(12-volt)
Distributor Cap Spring Clip w/ Bracket
Fits: (DC, SC with Delco vertical
300B, 400B, 500B, 600B w/ Delco
$14.95
distributor & clip held cap)
Replaces: 1889967, 1889999 (bracket)
(2-1/4" o/a length)
$22.95
$6.95
NEW! Delco Distributor Shaft Bushing &
Shim Kit fits: DC, SC w/ Delco vertical
conversion distributor 1111411; 200B, 300B,
400B, 500B, 600B (All w/ Delco-Remy
Distributor w/ clip held cap)
Replaces: 810074, 810078, 811912, 1909003
(0.486" I.D., 0.656" O.D., 2.867" length)
USA made
Distributor Hold Down Clamp (For
3/8" hold down bolt) fits the following
w/ Delco 1111411 vertical conversion
distributor: DC, SC series NOTE: 2 used
per engine; Sold individually.
$14.45
Distributor Tag w/ (2) Rivets
Fits: Tractors & Industrial w/ Delco Remy
Distributor (2.5" long, .800" wide, .150" dia.
$14.45 rivet hole, 2" c.c. rivet holes) USA made
NOTE: Stamped w/ raised letters.
Customer must stamp numbers.
Spark Plug Wiring Sets - USA made
FDS149
ABC516
MFS105
$12.50
$29.95
$19.75
Spark Plug Wiring Set w/ 90° Boots
Fits: 4-cyl. models NOTE: Copper core w/
aluminum coating to prevent corrosion;
Waterproof neoprene. Cut to length.
Spark Plug Wiring Set w/ Straight Boots
Fits: V, VC, VI, VO, Terra Trac Crawler
(All w/ flathead continental engine &
distributors) NOTE: Copper core; Cotton
braided cover, Tailored original style.
ACS228
$15.95
ABC326
$19.85
ABC2863
$19.85
Spark Plug Wiring Set w/ Straight Boots
Fits: 4-cyl. models
NOTE: Copper core w/ aluminum
coating to prevent corrosion; Waterproof
neoprene. Cut to length.
Spark Plug Wiring Set w/ 90° Boots
Fits: 6-cyl. models
coating to prevent corrosion, waterproof
Electrical parts
ABC488S
(11/16"
Bracket)
Distributor Mounting Gasket
Fits: SC, DC w/ Delco conversion
USA made
Case
ABC556
Price
Spark Plug Wiring Sets - USA made cont...
NEW! Spark Plug Wiring Set w/ Straight
Boots fits: 6-cyl. models
coating to prevent corrosion, waterproof
Spark Plugs (Autolite)
NOTE: Check spark plug specifications before ordering as some
models may use more than one type.
ABC324
$4.75
Fits: D, L, V, VA series (All w/ 18 mm
thread), 200, 300, 320, 350, 400, 500, 600,
700, 800, 900, 430, 440, 470, 480, 530, 540,
570, 580, 630, 730, 770, 830, 870, 930, 970
ABC324 specifications: 18 mm thread, 1/2" reach, 7/8" hex,
Autolite 3116, Plug Gap .025"
ABC169
$7.20
Fits: C, CC, D, DC (All w/ 7/8" thread)
ABC169 specifications: 7/8" thread, 5/8" reach, 15/16" hex,
ABC168
$4.25
Fits: S, SC, SI, SO
ABC168 specifications: 14 mm thread, 3/8" reach, 13/16" hex,
CKS2301
$34.85
Spark Plug Cover fits: VA, VAC, VAH,
VAI, VAO, VAS, Replaces: VT3217, VT4348
USA made
Ignition Tune-Up Kits
NOTE: Kit contains: Points, Condensor, with OR without Rotor
ABC310
(w/ Rotor)
ABC328
(w/out
Rotor)
Spark Plug Wiring Set
Fits: VAC series, 200B thru 630
NOTE: Copper core w/ aluminum coating
to prevent corrosion. Premium quality no cutting or fitting required.
$15.80
$11.30
Ignition Tune-Up Kit (Autolite)
Fits: VA series, 200B, 300B, 320, 350, 400,
400B, 430, 440, 470, 500B, 530, 570, 600B,
700, 800 (All w/ Auto-Lite distributors)
Replaces: IGW30280S (point set),
IBB2042SS (condensor), IG1657R (rotor)
NOTE: Only fits distributors w/ 3-3/8"
O.D. cap. Will not fit model IGZ or
IGW distributors. Kits contain: points,
condensor & rotor, Point Gap .020.
Ignition parts continue on next page
83
Starters, parts
Order #
Price
Ignition Tune-Up Kits cont...
$10.75
Electrical parts
Case
ABC018
(w/ Rotor)
Ignition Tune-Up Kit w/ Rotor
(For Delco Distributors w/ clip held cap
thru 1963) fits: (DC, SC with Delco vertical
300B, 400B, 500B, 600B (All w/ DelcoRemy distributor w/clip held cap)
Replaces: 1944374 (point set), 1869704
(condensor), 1905590 (rotor)
NOTE: Kit contains: Points, condenser &
rotor. Point Gap .020.
Rotor Buttons
ABC518
ABC520
Rotor Button fits: VA series, 200B, 300B,
320, 350, 400, 400B, 430, 440, 470, 500B,
530, 570, 600B, 700, 800 (All w/ Auto-Lite
distributor w/ clip held cap)
Replaces: IG1657R NOTE: Will not fit
Model IGZ & IGW distributors.
$5.50
Order #
Price
ABC547
$41.10
ABC458
$39.50
ABC507
$23.95
IHS132
Order #
Price
$414.50
Improved Positive Style Starter Drive
(Bendix) fits: V, VA, VAC w/ starter
MZ4072, MZ4114
NOTE: 10 teeth.
ABC1203 $17.95
Starter Commutator (Brush) Band Cover
(For 4-1/2" O.D. Delco starter housing)
Fits: Some 300B w/ Delco Starter SN:
6095009 & up, etc., Replaces: 1886923
(1-3/16" wide) USA made
NOTE: Stainless steel.
ABC517
$14.45
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
starters (2.955" o/a length, .915" wide, 140"
dia. rivet hole, 2.650" c.c. rivet holes)
USA made NOTE: Anodized aluminum.
MAG6
ABC511
(Black 6-volt)
$14.45
ABC514
(Red 12-volt)
$14.45
WICO Magneto
Fits: D, S series
NOTE: Using 2 bolt vertical flange
mount magneto.
$14.50
Instructions & Parts List (1959) WICO
XH & XHD Magneto Service
FXH2100B
FXH2024
FXH2403 FXG2002A-2 FXG1008
XHGK
ABC556
Original Spring Style Starter Drive
(Bendix) fits: V, VA, VAC w/ starter
MZ4072, MZ4114
NOTE: 10 teeth.
$44.95
WICO magneto, parts - USA made
XH894
Original Spring Style Starter Drive
(Bendix) fits: C, D series w/ starter
MAB4105, MAB4040; S series w/ starter
MZ4095; 400 w/ starter MAX4095 gas, LP
Replaces: 1858522 NOTE: 10 teeth.
Starter Drive Spring only
(For ABC458 Starter Drive)
Rotor Button fits: (DC, SC w/ Delco
vertical conversion distributor 1111411),
200B, 300B, 400B, 500B, 600B (All w/ Delco
Distributors w/ clip held cap)
Replaces: 1905590
$3.95
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Delco
Remy starter (2.5" long, .800" wide, .150"
dia. rivet hole, 2" c.c. rivet holes)
USA made NOTE: Stamped w/ raised
letters. Customer must stamp numbers.
The following parts (Sold separately) will fit XH894, XH3001,
XB2065 WICO Magneto:
Order #
Price
FXH2100B
$22.45
Points
FXH2024
$15.25
Condensor
FXH2403
$57.50
Coil
FXG2002A-2
$60.15
Cap
FXG1008
$33.95
Rotor
XHGK
$4.05
Gasket (For cap)
ABC556
$2.50
Mounting Gasket
84
Description
Starter Solenoid Relay Assemblies
ABC138
$29.95
12-volt Solenoid Switch (3 Post Saddle
Mount) fits: 300B diesel, 310, 430 gas, 400B,
440, 450, 470, 480, 500B, 530, 540, 570 gas,
580, 600B, 611B gas, diesel (All w/ Delco,
Prestolite starters); Fits: 630 diesel as a
manifold heater solenoid
Replaces: G44835, A40795, G45017
NOTE: 12-volt systems only.
Starters, parts cont...
Order #
Price
Starters, parts cont...
Order #
Price
ABC065
$12.95
IHS760
$19.95
NEW! Ignition / Key Switch w/ 2 Keys
& Mounting Nut fits: VA, VAC, VAI, VC,
other Case models w/ 2 wire switch
USA made NOTE: 2 spade terminal
switch; May have to drill hole to 0.800" on
some applications.
CKS111
$27.95
Ignition / Key Switch w/ 2 Keys (O.E.M)
Fits: 430, 470, 480, 480B, 530, 570, 580, 580B,
584, 585, 586CKB, 630, 730, 830, 930 Skid
Steers: 1830, 1835 (All gas), 1030 diesel
NOTE: Three post w/ four screw type
terminals.
CKS113
$32.15
Ignition / Key Switch w/ 2 Keys (O.E.M.)
Fits: 430, 470, 480, 480B, 530, 570, 580, 580B,
630, 730, 830, 930, 1200, 1470, W5A, 500LK,
1150, 1155 all diesel), Replaces: A24510
USA made NOTE: Four post w/ five screw
type terminals.
KEY1094
$2.05
ACS288
$34.95
KEY01
$4.50
FDS400
$2.95
Starter Solenoid Relay Assemblies cont...
ABC1366 $34.95
12-volt Starter Solenoid (4 Terminal)
(For 30, 35 MT series Delco starters)
Fits: 730 thru 970; 1070 w/ starter 1113399,
1113478; 1090, 1170, 1175, 1270; 1370, 1470,
1570, 2470 w/ starter 1113399 (All diesel)
Replaces: A40461, A42326, A43846, A44894
ABC508
$5.35
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 18 NC thread
starter terminals) fits: Case models
NOTE: Brass.
ABC506
$5.30
Starter Solenoid Terminal Repair Stud
(For tractors using 5/16" x 24 NF starter
terminals) fits: Case models
NOTE: Brass.
Ignition / Key Switches, parts
Starter Switches
IHS798
ABC233
ABC066
$12.95
$12.50
$16.40
Starter Push Switch (O.E.M.)
Fits: 430 thru 4890
Replaces: A36948
NOTE: See website for all applications.
Starter Push Switch, Extra heavy duty
momentary push button switch
Fits: 400 thru 600 series, Industrials
Replaces: 09995AB, A30858
(Mounting stem 5/8" - 32 thread, 21/32"
long) NOTE: NOTE: Depress button:
ON; Spring return: OFF. two screw type
terminal. Up to 35 V (DC), rubber cap for
dust and moisture protection.
Manual Starter Switch (Base Mount)
(For 7/8" hole) fits: D, DC, L, R, S, VA, VC
series, Replaces: O4981AB, VT3588
(Dash mount for 1-3/4" mounting hole)
NOTE: Will work on 6 or 12 volt.
Push / Pull Switches
ABC398
ABC489
$8.20
$14.50
Universal 2-Position Push / Pull Starter
Switch fits: Ag & Light Industrial
equipment (10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, two
screw type terminals, non-fused. This can
be used on battery ignition systems only.
Magneto Push / Pull Ignition Switch
(O.E.M.) fits: Case models w/ Magneto
Ignition NOTE: One screw type terminal;
Out: ON; In: OFF.
Ignition / Key Switch w/ 2 Keys
Fits: VA, VAC, VAI, VC, other Case models
w/ 2-wire switch
NOTE: 2 wire switch; May have to drill
hole to 0.800" on some applications.
Ignition Key
(For CKS111, CKS113 Switches)
Replaces: A24509
USA made
Fits: 700, 800, 900; Industrials: 680B, 680C,
680CK, W5 thru W26, 310E, 310F, 310G
Replaces: A11373, L17820, D75657
NOTE: Five spade terminals, .995" dia.
threaded end.
Ignition Key
(For ACS288 Ignition Switch)
Fits: 700, 800, 900
Replaces: A20346
Ignition Key
Fits: 380 thru 1694
Replaces: K962338
ABC400
$14.85
Fits: Ag & Light Industrial equipment
(3/4" dia. thread)
NOTE: Four stud type terminals.
85
Electrical parts
12-volt Starter Solenoid (3 Terminal)
(For Delco starters) fits: 430, 470, 480, 530,
570, 580, 580B, 630 (All diesel); 730, 770,
830, 870, 930, 970 (All gas)
Replaces: G44891, 594185C1
Case
ABC1179 $20.75
Alternator, parts
Generator parts
Price
ABC015
$24.95
Case
Order #
Electrical parts
ABC1207 $17.95
ABC519
ABC511
(Black 6-volt)
ABC514
(Red 12-volt)
$14.45
NOTE: Alternators are NEW not rebuilt • To convert
6-volt to 12-volt system. For negative ground systems.
6-volt Generator Cut-Out Assembly
Fits: DC, LA, RC, SC Series, V, VAC series
(1939-43), Replaces: CB4014 & Autolite 9-4,
9-5 NOTE: 15 Amp. mounting tabs are
parallel w/ cut-out.
Generator Commutator (Brush) Band
Cover (For 4-1/2" O.D. Delco Generator
Housing) fits: Some 200B, 300B, etc. w/
Delco generator mounted on LH side
Replaces: 1872638
(1-5/8" wide) USA made
Order #
Price
ABC535
$149.95
Mini 41 Amp Maximum Alternator
w/ Pulley & Diode
Fits: Case models requiring a smaller dia.
alternator for clearance
(4-1/2" housing dia., 2-1/2" pulley dia.,
3/8" belt width) NOTE: For 12-volt
negative ground systems only. This
alternator has a built in 3-wire internal
regulator that requires an excitation
circuit. Includes instructions.
ABC2315 $34.95
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
generator (2.300" o/a length, .732" wide,
.145" dia. rivet hole, 2" c.c. rivet holes)
USA made NOTE: Anodized aluminum.
Alternator Pulley (For ABC535)
(0.587" ID, 1.437" o/a length,
3" pulley O.D., 5/8" belt width)
USA made
ABC418
$99.95
$14.45
$14.45
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using Delco
Remy generator
(2.5" long, .800" wide, .150" dia. rivet hole,
2" c.c. rivet holes) USA made
NOTE: Stamped w/ raised letters.
63 Amp Alternator w/ Pulley
Fits: Case models
(6-1/4" housing dia., 2-1/2" pulley dia.,
5/8" belt width) NOTE: For 12-volt
negative ground systems only. Simple
1-wire alternator hook up: Run a wire
from alternator through amp gauge to
positive side of battery! Must rev engine
to 800 - 850 RPM in order for unit to self
excite.
ABC1426 $19.95
Pulley only (For ABC418)
(.670" shaft dia., 3-3/16" pulley O.D.,
1/2" belt width)
ABC495
Voltage regulators
Order #
Price
ABC152
$32.95
Pulley only (For ABC418)
(.670" shaft dia., 2-1/2" pulley O.D.,
5/8" belt width)
6-volt (4-Terminal) Voltage Regulator
(Base Mount)
Fits: 200B series w/ Delco generator
#1100531, Replaces: G44861
ABC155
86
$32.95
$19.95
12-volt (3-Terminal) Voltage Regulator
(Saddle Mount)
Fits: 700, 730, 800, 830, 900, 930, 940, 1030
Combines: 800, 1000, 1010, 1060 Wheel
Loaders: W7, W8B, W9, W9A, W9B, W10B
(All w/out cabs); Will also fit generator
1100444, 1100450
Replaces: Delco 1118991, A20792
ABC404
$34.95
Universal Mounting Kit
Fits: Case models
NOTE: Used when switching from a
generator to an alternator. Does NOT
include top adjusting bracket. May
have to be drilled or modified for your
application.
ABC529
$23.50
Universal Top Adjusting Bracket
Fits: Case models
(7/8" wide, 1-1/2" offset, 8-1/4" from
farthest end of slot to center of mounting
hole, 3-3/4" slot length, 3/8" mounting
hole) NOTE: Customer may need to trim
to fit some models.
Light switches, parts
Price
$14.50
ACS139
$39.95
$4.95
$4.95
JDS631
$12.95
ABC398
Knob only (Plain Face)
(For ACS139 Switch)
(10 - 32 thread)
$44.95
$8.20
3-Position Light Switch, (Hi-Lo-Charge)
(Hi charge w/ lights) fits: VAC, VAH, VAI,
VAO (All up to SN: 5060679) (All w/ cut out
on generator), Replaces: VTA463
(10-32 thread) NOTE: Three screw type
terminals, .800" dia. threaded stem.
Knob only (Says "LIGHTS")
(For ACS139 Switch)
(10-32 thread)
ABC367
IHS599
Field Resistor on Light Switch
Fits: VA series up to SN: 5060679
NOTE: Fits switch VTA463. Designed for
the listed models w/ a cut out relay on the
generator.
Universal 3-Position Fused Push / Pull
Starter & Light Switch
Fits: VA series SN: 5060679 & up, V series
Replaces: VT2108, VTA2683, VTA3163
NOTE: 15 AMP, five terminals, fused, 7/1620 stem. 10-24 N.C. black plastic knob.
12-volt Rotary Light Switch (4-position)
Serviceable for 700 thru 1030 series
NOTE: Knob will look different.
Universal 2-Position Push / Pull Light
Switch fits: Ag & Light Industrial equipment
(10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, Two screw
type terminals, non-fused.
Order #
Price
ABC336
$77.95
ACS150
$49.50
IHS351B
(6-volt)
$44.95
IHS351B12V
(12-volt)
$44.95
IHS647
$34.95
ABC353
(Lo Beam)
$7.50
ABC460
(Hi Beam)
$16.50
ABC3028
$12.50
NEW! Rubber Light Bezel (For 'Hobbs'
style light w/out glare guard) fits: Some
730CK, 830CK, 930CK, 1030CK, 1070
thru 1570, 2090 - 4890, Replaces: A25213,
D31441 (5.250" O.D., 3.675" I.D., 1.125"
wide 3 outer tabs to attach rubber ring
to light housing & 4 inner tabs to secure
to sealed beam) NOTE: Fits IHS647 &
ABC3154 lights. See insert A.
JDS676
$18.15
Clamp Ring w/ Screw (For Sealed Beam
Lights) fits: Wheel Tractors: 330, 430,
470, 480, 480B, 530, 570, 580, 580B, 630,
730, 830, 930, 1030 Lawn & garden: 220,
222, 224, 444, 446, 644, 646; Skid Steers:
1500, 1530B, 1700, Replaces: B50255,
B50258 (4-1/2")
For light components see pg. 89.
Price
OLS053
(6-volt)
$74.95
OLS055
(12-volt)
$74.95
Complete Headlight Assembly
Fits: DC, LA, SC, 400, 500, 600
Replaces: Serviceable for 9668AB,
O6330AB
(5-3/4", curved lens)
NOTE: Zinc plated.
6-volt Complete Headlight Assembly
Fits: C, LA, RC, V series, etc.
Replaces: O4576AB, O6752AB, VT2615
(7" flat lens)
NOTE: Zinc plated.
6-volt Complete Headlight Assembly
Fits: VA, VAC, VAH (All up to SN:
5400000), Replaces: VT3660
Headlights, parts
Order #
Electrical parts
ABC425
Case
Order #
IHS950
Headlights, parts cont...
Complete Headlight Assembly
Fits: VA, VAC series SN: 541000 & up
Replaces: VTA3026, VTA3027
12-volt Sealed Beam Headlight
Assembly Serviceable for 770 & up
w/ Flat Top Fenders, Replaces: A59701
(4-1/2") NOTE: Post is out of back w/
wires thru post.
12-volt Sealed Beam Bulb
Fits: 584, 585, 586C, 680, 680B, 680C, 730,
830, 930, 1030; Industrials: 310F, 310G,
350B, 450, 480, 480B, 480C, 480D, 480LL,
580, 580B, 580C, 750, 1000D
ABC353 Replaces: 4411
ABC460 Replaces: 4410
(4.365" O.D.) NOTE: Check bulb
number before ordering.
87
Tail lights, parts cont...
Dash lights, parts
Order #
Price
$23.95
JDS499
(12-volt)
$23.95
Electrical parts
Case
JDS495
(6-volt)
Order #
IHS899
Dash Light w/ Bulb
Fits: Case models
(1/8" long from flange to first lip,
11/16"-32 UN threaded stem)
NOTE: Dash lights not exact of original,
but works great
$12.95
JDS588
(Black)
$12.50
JDS588CH
12-volt Fender & Cab Warning Light
w/ 2 amber lenses, double contact bulb
& black die cast base
Serviceable for 430 thru 1370
(All using round warning light)
Replaces: A34853, A143600 & D49734
(4" dia.)
Dash Light Cover (1" Dia.)
(For JDS495, JDS499)
JDS588
ABC548
$9.95
12-volt Round Tail Light Assembly
w/ licensed lamp window, red lenses &
black ABS base
Serviceable for 430, 470, 530, 570
Replaces: A36831
(4" dia.; 2 stud mount, 1-7/8" c.c. studs)
For light components see pg. 89.
Price
IHS473
(6-volt)
$69.95
IHS455
(12-volt)
$69.95
$102.95
OLS074
(12-volt)
$102.95
ABC3154
88
ABC1439
$34.95
$3.45
6-volt Bulb only
(For ABC544, ABC548)
Combo Tail Light Assembly w/ Red
Jewel Lens & Rotary Switch
Fits: VA series, Early 300B
Replaces: VTA3396
(4-3/4")
OLS073
(6-volt)
12-volt Sealed Beam Combination Rear
Light Bulb (4-1/2") w/ transparent red
background using separate bulb
Fits: Case models w/ combination
Tail light & 12-volt bulb
Replaces: 4409
$17.15
Tail lights, parts
Order #
$19.95
Rear view
ABC544
JDS588CH
(Chrome)
Price
ABC546
$26.50
12-volt Fender & Cab Warning Light
w/ 1 amber lens, 1 red lens, amber side
marker, single contact bulb & black ABS
base fits: Late 770 thru 4890 (All using
rectangular warning lights)
Replaces: A44201
Combo Red / Dot Tail Light Assembly
Fits: DC, LA, SC, 400, 500, 600, 900
OLS073 Replaces: O8810AB
OLS074 Replaces: O9897AB
(5-3/4")
NOTE: Switches from red to white.
ABC1243
$4.95
Amber Lens only
(For ABC546)
NEW! 'Hobbs' Rear Combo Light
Fits: Tractors & equipment using rear
12-volt combo light w/ stud post out
back & dash mounted light switch
USA made NOTE: New old stock, paint
is blemished.
Black Ring
$4.10
Seamless Gasket
The light components below fit OLS053, OLS055, OLS073,
OLS074:
IHS355
$3.85
Gasket
IHS354
$3.00
6-volt Bulb
IHS475
$6.00
Light Terminal
IHS436
$2.95
12-volt Bulb
OLS062
$31.50
Lens w/ Guide Name
ABC320
$10.95
Reflector (For Head & Work Lights)
OLS063
$24.95
Ring (Zinc-Plated)
ABC378
$19.95
OLS064
$3.95
Gasket
Reflector (For Tail Lights w/ Red Jewel Lens
& 12-volt Bulb in Jewel Lens)
OLS154
$27.95
Reflector (For OLS053, OLS055 w/ 12-v bulb)
IHS474
$14.95
Jewel Lens w/ Base & 6-volt Bulb
IHS354
$3.00
6-volt Bulb (For OLS154/aftermarket lights)
ABC1115
$14.95
IHS436
$2.95
12-volt Bulb (For OLS154/aftermarket lights)
ABC342
$1.80
Light Bulb (For 6-volt Jewel Lens)
ABC343
$1.80
ABC541
$18.70
Combo Light Switch w/ Lever Style Knob
ABC536
$6.50
Lever style Plastic Knob
Order #
Price
Description
OEM lights use the following (4) bulbs. Check bulb prior to
ordering:
OLS068
OLS075
ABC358
ABC359
The light components below fit IHS647, ABC3154:
ABC3028
$12.50
NEW! Hobbs Rubber Light Bezel
NOTE: See insert A.
ABC527
$5.95
Concaved Mounting Washer
ABC353
$7.50
12-volt Sealed Lo-Beam Bulb 4411
ABC460
$16.50
12-volt Sealed Hi-Beam Bulb 4410
Bottom view
OLS068
$4.95
OEM 6-volt Bulb w/ Ring, Single Contact
OLS075
$9.95
ABC358
$7.95
OEM 6-volt Bulb w/ Ring, Double Contact
ABC359
$10.95
IHS474
$14.95
ABC1115
$14.95
ABC342
$1.80
Order #
Price
ABC343
$1.80
CKS081
$30.60
ABC541
$18.70
Combo Light Switch w/ Lever Style Knob
ABC536
$6.50
Lever style Plastic Knob
CKS082
$98.95
CKS054
$34.95
CKS098
$37.95
Emblems
The light components below fit ABC336:
ABC307
$19.95
Flat Lens
ABC312
$16.50
Ring
ABC347
$7.95
Gasket
ABC350
$13.90
Reflector (Uses IHS354 & IHS436 bulbs)
IHS354
$3.00
6-volt Bulb (For ABC350/aftermarket lights)
IHS436
$2.95
12-volt Bulb (For ABC350/aftermarket lights)
OEM lights use the following (4) bulbs. Check bulb prior to
ordering:
OLS068
OLS075
ABC358
ABC359
Bottom view
OLS068
$4.95
OLS075
$9.95
ABC358
$7.95
ABC359
$10.95
IHS475
$6.00
Light Terminal
The light components below fit ACS150, IHS351B,
IHS351B12V, IHS455, IHS473:
IHS475
$6.00
Light Terminal
IHS352
$14.50
Lens (Dimpled Outer Surface) w/ Guide Name
ABC388
$14.50
Lens (Smooth Outer Surface) w/ Guide Name
Electrical / Chassis parts
$14.45
ABC560
Case
IHS353B
Light components
Front Emblem / Nameplate
Fits: S, SC, SI, SO
Replaces: O6331AB
NOTE: Curved metal, dark blue
background.
Eagle / Sunburst Emblem
Fits: 300, 420, 425, 600
Replaces: A7600
(4-3/8" O.D.)
USA made
NOTE: Plastic, injection-molded.
Case Eagle Emblem w/ Retaining Clips
Fits Ag Tractors: 200B, 300B, 400B, 430, 500B,
530, 600B, 630, 700, 730, 800, 830, 930, 1030,
1200; Crawlers: 310C, 310D, 310E, 310F, 450
Lawn & Garden: Older Case models
(4-1/2" tall x 1-3/4" wide, 2" c.c.)
NOTE: Chrome. Fits on flat spot between
headlights.
Side Emblem w/ Retaining Clips
Fits: 300B, 400B, 500B, 600B, 700, 800, 900
Replaces: A11320
(2" tall x 7-1/16" long)
NOTE: Chrome.
89
Air cleaner parts
Serial number tags, parts
NOTE: Anodized aluminum. Customer must stamp own serial
Order #
Price
CKS135
$21.50
Serial Number Tag (2 Rivet Holes)
w/ Rivets fits: D series, LA series, S series,
V series, 500
(1-7/16" x 3-3/16)
USA made
Air Cleaner Cap
Fits: C, CC, D, DC, DI, L, LA, RC, V, VC
Replaces: O7080A1
(6" O.D. x 2-3/4" tall)
USA made
NOTE: Weld to existing pipe. Bare steel.
CKS095
$42.95
Serial Number Tag (2 Rivet Holes)
w/ Rivets fits: 200B, 300B, 310, 320, 350,
400 series, 400B, 430, 470, 480, 500B, 530,
570, 580, 600B, 630, 730, 800 series, 830, 930,
1030 USA made
Air Cleaner Cap
Fits: VA series; Industrial Crawlers: 310,
310C, 310D, 310E, 310F, 320, 400B, 420,
420B, 420C, 500B gas, Replaces: VT3812
(1-13/16" I.D.)
CKS132
$34.95
CKS134
$34.95
IHS282
$45.15
Air Cleaner Cap
Fits: 310, 320, 350, 450, 430, 480, 530, 580,
W5A (All gas Industrials)
Replaces: D22685
(2" I.D., 2-1/8" O.D.) USA made
NOTE: Black finish.
IHS283
$47.05
Air Cleaner Cap
Fits: 730 gas, 830 Ag gas
Industrials: 450, 530CK, 580CK, W7, W9
Replaces: A21430
(2-1/4" I.D., 2-3/8" O.D.) USA made
number.
Order #
Price
$24.95
CKS104
$24.95
Chassis parts
Case
CKS102
ABC464
$0.25
ABC1585
$0.50
Rivet only (For Serial Number Tags)
Fits: Case SN tags
(6 x 3/8", .135" shank O.D.)
NOTE: Steel. Sold individually.
Rivet only (For Serial Number Tags
Fits: Case SN tags
(.347" o/a length, .225" head dia., .255"
useable shank length, .126" shank dia.)
USA made NOTE: Brass. Sold
individually. Customer may need to drill
the tag for the rivet.
Grille parts
Order #
CKS2049
Price
$9.95
Quick Release Grille Stub Assembly
Fits: 430 - 470, 530 - 570 (All SN: 8262800 &
up), 730, 830 series (All SN: 8253501 & up),
930 SN: 8253501 & up, 1030
Sold individually.
CKS2051
$2.50
Clip, Quick Release Receptacle
(For Grille Stud) fits: (430, 530 Both SN:
8262800 & up), (730, 830, 930 All SN:
8253501 & up), 1030
Replaces: A36042, L40219 USA made
NOTE: 2 to 6 used per tractor;
Sold individually.
IHS946
$1.60
Cage Nut fits: 200B, 300, 300B, 350, 400B,
500B, 530, 600B, 630
Replaces: G48001, 131-105
(5/16"-18 NC) NOTE: 2 to 4 used on most
models; Sold individually.
ABC2053
$1.50
Hood, Dash Cage Nut fits: 200B, 300B, 400,
400B, 430, 500B, 530, 600B, 630, 700, 800,
900, 930, 1030, Replaces: G48002, 131-115
(1/4" - 20 NC) NOTE: Zinc finish.
6 - 25 used depending on model;
Sold individually. See website for full
applications.
90
ABC1826 $52.60
FDS034
$14.95
FDS033
$9.95
Air Cleaner Inlet Extension Pipe
Fits the following up to SN: 4700000:
VA, VAC, VAH, VAI
Replaces: VT3656
(20-1/4" o/a length)
NOTE: For use w/ 1-piece manifold.
Air Cleaner Inlet Extension Pipe
Fits the following w/ SN: 4700000 & up:
VA, VAC, VAH, VAI
Replaces: VT4560
(22-3/4" o/a length)
NOTE: For use w/ 2-piece manifold.
Air Cleaner Cap
Fits: Some 350B thru 680CK; Also fits
the following diesels: (730, 830 up to SN:
8201146), 770, 870, Replaces: A21433,
A61276 (2-1/2" I.D., 5-1/4" O.D., 4" tall)
USA made
NOTE: Black finish.
Air Cleaner Oil Cup
Fits: 200B, 300, (300B SN: 6095009 6122024), 320, 330, 430, 470 gas
Replaces: G46012
(4-3/4" O.D. at lip, 4-15/32" I.D., 3" high)
Air Cleaner Inner Oil Cup
Fits: 200B, 300, (300B SN: 6095009 6122024), 320, 320B, 330, 430, 470 gas
Replaces: G46013
Air cleaner parts cont...
Order #
Price
FDS081
$10.30
Pre-cleaner parts cont...
ABC1765 $14.95
Air Cleaner Oil Cup
Fits: 430, 470, 480 diesel; 530, 570, 580, 630,
W5A gas, Replaces: G46325
(5-3/8" I.D.)
Air Cleaner Oil Bath Filter Element
Fits: Case models
(3" wide x 78" long)
NOTE: Replaces the mesh in existing air
cleaners. Sold by the bag (Normal utility
air cleaners will use 2 bags).
Dust Unloader Valve (Vacuator Valve)
(For Dry Air Cleaners)
Fits the following models w/ dry air
cleaner: 1170, 1175, 2090 & Industrials
using 3" unloader valve
Replaces: L30414, S113982
Price
$39.95
ABC510
$64.60
ABC554
$42.95
Pre-Cleaner Cover w/ Brass Knurled Nut
Fits: Some 310 thru 310G, 420C, 430, 450,
470, 480, 530, 570, 580, 630; Skid Steers:
1700, 1845 (All w/ 5-1/2" bowl)
Replaces: D30676 (5-7/16" I.D.) USA made
NOTE: Aluminum.
ABC484
$24.95
Pre-Cleaner Bowl
Fits: Some 310 thru 310G, 420C, 430, 450,
470, 530, 570, 630 Skid Steers: 1700, 1845
Replaces: D30675
NOTE: Clear plastic.
JDS559
$24.95
ABC338
$13.95
Pre-Cleaner Cap Assemblies, parts
ABC1824
ABC383
ABC512
JDS741
$49.95
$74.95
$74.95
$99.95
Pre-Cleaner Cap Assembly
Fits: 580D turbo & others w/ 3" I.D. base
& 7" bowl
(3" I.D. base)
Fits: Case models w/ 4" I.D. base
& 10-1/2" bowl
ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at
bottom = 5", Cone I.D. at top = 2-7/16", Bowl side height = 2-7/16",
Overall height = 3-9/16"
Pre-cleaner parts
Order #
ABC470
Chassis parts
$12.95
Case
ABC422
$27.50
Price
Pre-Cleaner Cap Assemblies, parts cont...
Air Cleaner Oil Clamp
Fits: 200B, 300, (300B SN: 6095009 6122024), 320, 320B, 330, 430, 470 gas
Replaces: G45011
JDS540
Order #
Fits: Some 310 thru 420C; Fits the following
diesels: 430, 470, 480; Fits the following
gas: 530, 570, 580, 630 (All w/ 2" I.D.
plastic base, 5-1/2" bowl)
Replaces: D20604 USA made
Fits the following diesels: 450, 530, 570;
Also fits the following gas, LP: 730, 830
(All w/ 2-1/4" I.D. base & 7" bowl)
Fits: 450B, 600, (730, 830 diesel up to SN:
8201146), 770, 870, 930, 1030, W7, W8, W10
w/ 2-1/2" I.D. base & 7" bowl
Replaces: A24391, A64589 USA made
Pre-Cleaner Cover w/ Brass Nut
(For 7" ABC338 bowl)
Replaces: 73187, A24395
NOTE: Green metal.
Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet
Fits: Some 430, 470, 530, 570 diesel, 580C,
730, 770, 830CK, 830 SN: 8201145 & up,
870, 930, 1030CK, Replaces: 73186, Can
replace Donaldson bowl P020227
ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3",
Cone I.D. at top = 3-1/2", Overall height = 4-1/8"
JDS557
$68.95
JDS561
$75.00
Pre-Cleaner Cap Assembly w/ Brass Nut
Fits: 580D Turbo & others w/ 3" I.D. base
& 7" bowl
(3" I.D. base)
NOTE: Powder-coated green.
Pre-Cleaner Base
(For ABC338 Bowl & JDS559 Top)
Fits: All Donaldson Pre-Cleaners
w/ 3" base
NOTE: Metal. Check size before ordering.
Pre-Screener w/out Screen
Fits: All Donaldson pre-cleaners
w/ 3" O.D. pipe
NOTE: Powder coat green. Check size
before ordering.
Pre-cleaner parts continue on next page
91
Pre-cleaner parts cont...
Order #
Price
Fuel caps, parts
Order #
CKS121
Pre-Cleaner Cap Assemblies, parts cont...
Chassis parts
JDS938
ABC339
$39.95
Case
JDS535
Price
$19.95
Screen w/ Clip & 2 Springs
(For Pre-Screener)
Fits: Case models w/ 7" dia. Pre-cleaner
bowl (5-1/4" tall x 19-3/8)
NOTE: Powder coat green.
ABC1221
$4.95
Pre-Screener Clip & Springs Kit
(For JDS535 Screen)
NOTE: Powder coat green.
Gasket only (For CKS121, CKS119 caps)
Replaces: A31101
(2.242" I.D., 2.948" O.D.)
USA made
NOTE: Rubberized cork.
CKS117
$14.99
Fuel Cap w/ Gasket (Vented)
Fits: V, VA series (Will fit both main &
auxiliary fuel tanks); 200B, 300B, 320B,
420B, 500B, 600B, Replaces: G13271
(2.25" I.D., 1.80" outer tang to tang,
2.37" O.D.)
NOTE: Like original
Underside view
$4.95
$16.95
Pre-Cleaner Bowl (10-1/2" dia.)
For 3" to 4" inlet
Fits: 970, 1070, 1090, 1170, 1175, 1270, (1370
up to SN: 8727601), Replaces: A42467, Can
replace Donaldson bowl P016330
Underside view
CKS119
$19.95
ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side height
= 3", Cone I.D. at top = 5-9/16", Overall height = 4"
Fuel tank webbings
Order #
ABC494
Price
$3.95
ABC1823
$4.95
ABC1656
$5.25
ABC1827
92
$5.50
Fuel Cap (Vented) w/ Gasket
Fits: C, CC, D, DC, L, LA, R, RC, S, SC,
400 gas, Replaces: O10909A, A26400
(cap), O1036AB, A31101 (gasket)
(3" I.D.; 2-5/8" tang end to end length)
Underside view
MHS043
$9.95
Application
Fits: Tractors using 1" wide webbing
For fuel tanks and sheet metal
(3' L x 1" W x .042" thick) USA made
NOTE: Economy black woven nylon.
Sold in 3-foot length. Can be glued or
riveted.
For fuel tanks & other sheet metal parts
(3' L x 1" W x .050" thick)
NOTE: Black canvas, mildew resistant.
Sold in 3-foot length.
Fits: Tractors using 1-1/2" wide webbing
(3' L x 1-1/2" W x .050" thick)
(3' L x 2" W x .050" thick)
Underside view
Fuel Cap w/ Gasket fits: 530 gas up
to SN: 8248494, 530 diesel up to SN:
8247916, 630, (early 730, 830, 930 w/
fuel tank in front of driver), 1200, 1470;
Industrials: 780, W5A, W7, W7C, W7E,
W9A, W12, Replaces: A22451, A33558
(3-1/2" O.D.; 2-1/2" length tangs)
NOTE: Vented thru top of cap.
Fuel Cap (Vented) w/ MHS043GK
Gasket fits: 430, 530 gas SN: 8248495 &
up, 530 diesel SN: 8247917 & up, 470,
480, 480B, 570, 580, 580B, (Late 730, 830
both w/ 2-7/8" O.D. cap), 770, 870, 930,
970, 1030, 1070, 1090, 1170, 1175, 1270,
1370, 1570, 2470, Serviceable for V, VA
series (Will fit Both main & auxiliary
fuel tanks); 200B, 300B, 320B, 420B, 500B,
600B, Replaces: A32119, G13271
(2-7/8" O.D.)
MHS043GK $1.50
Gasket (For MHS043)
(2.622" O.D., 1.500" I.D., 0.100" thick)
NOTE: Rubberized cork gasket.
Sediment bowl assys., parts
Order #
Price
ABC002
$29.95
Sediment Bowl Assembly (All Fuel)
Fits: DC, RC, & SC series
Replaces: A31102, O8913AB
(Includes shallow bowl w/ 3/8" pipe inlet,
(2) 1/8" pipe outlets)
NOTE: For tractors w/ 1 outlet use
ABC092 sediment bowl assy.
Sediment bowl assys., parts cont...
Order #
Price
ABC092
$27.30
$4.95
Glass Bowl (For ABC281, IHS713)
(2.315" L, 2-1/8" O.D.)
JDS642
$0.95
Gasket, Replaces: A11211
(3/8" dia. center hole)
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
ABC236
$7.20
Sediment Bowl Assembly
Fits: D, S, V, VA, 200 thru 580B, 850, 850B,
850C, Replaces: O3990AB1, A30049
(3/8" pipe inlet, 1/8" pipe outlet, 1.280"
long bowl. Includes 5/16" compression
adaptor fitting)
ABC229
ABC534
ABC563
Bail Assembly w/ Brass Nut
Fits: CC, L, LA, RC, S series, 400, 420, 425,
700, 730, 800, 830 (All gas)
(2-1/8" O.D., 2.370" L)
ABC002 / ABC092 components
Fuel tank screen
NOTE: The following parts (Sold separately) will fit ABC002 &
Fits: Most Case models w/ stem style
sediment bowl. Will fit ABC092, ABC281,
IHS713, IHS1577 sediment bowl assemblies
(.375" screen O.D., .216" pipe O.D. 2.530"
o/a length) USA made
ABC092 Sediment Bowl Assys:
Order #
Price
ABC123
$2.90
Glass Bowl, Replaces: A11209
(2" O.D., 1.280" L)
ABC039
$1.45
Gasket, Replaces: A11208
(2" O.D.) USA made
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
ABC563
$4.95
Description
Description
Screen, Replaces: A11211, T7040
Bail Assembly w/ Nut
Price
ABC281
$34.45
ABC490
Sediment Bowl Assembly w/ 2.315" long
Bowl & 1/4" x 5/16" Adapter
Fits: LA, 400, 420, 425, 700, 800, (Late 730,
830) All gas, Replaces: A26615
(3/8" pipe inlet, (1) 1/8" pipe outlet)
IHS713
$69.30
Price
Fuel filters, parts
Order #
Order #
Order # Fuel Tank Screen...................................................... ABC1315............ $8.50
NOTE: Slides on top of sediment bowl inlet to prevent dirt from
the fuel tank bottom from entering the sediment bowl assembly.
To fit ABC281, IHS713, IHS1577 customer must drill sediment bowl
stem out.
Price
$6.45
In Line Fuel Filter w/ Hose & Clamps
Fits: Case models using 3/8" fuel line
NOTE: Must splice fuel line to use. Will
help to keep rust & dirt out of carburetor.
ABC1421 $5.25
EACH
All-Fuel Sediment Bowl Assembly
(For tractors w/ two tanks)
Fits: CC, L, Early LA (All w/ All-fuel)
Replaces: O1933AB
(3/8" pipe inlet, Includes (2) 5/16"
compression outlets) USA made
Fuel Filter Element w/ Seals (For Cav/
Simms fuel filters) fits: 380, 770, 780,
880, 885, 990, 995, 996, 1190, 1200, 1210,
1212, 1290, 1294, 1390, 1394, 1410, 1490,
1494, 1594, 1690, Replaces: K960911,
3044506R93, Cav # 7111/296
(3-1/2" O.D. x 3/4" I.D. x 2.85" tall)
Throttle lever
ABC124
JDS642
ABC229
ABC534
Fits: 200 - 400B gas, 430 up to SN:
8262800 gas, diesel, (430 SN: 8262801 &
up gas, diesel w/ narrow front & w/out
hydrostatic steering), 500B, 600B series
Replaces: G1085 (lever), B138-82 (roll pin)
USA made
ABC236
ABC281 / IHS713 components
The following parts (Sold separately) will fit ABC281 & IHS713
Sediment Bowl Assys:
Order #
Price
Description
Description
Order # Price
NEW! Throttle Drive Lever w/ Roll Pin............... CKS2968........... $48.85
NOTE: Bare aluminum.
93
Chassis parts
ABC039
Screen, Replaces: A11211
Case
ABC123
ABC124
Knobs, boots
Clutch parts
Order #
Price
FDS087
$36.95
Order #
Price
$7.70
ABC085
$4.50
Knob (Bakelite) (For Shift, Shuttle &
Range Levers) fits: 200B, 300B, 400B, 430,
530, 630, 730, 830, 470, 570 Industrials:
W3, W5, W5A, 480, 480B, 580, 580B, 680C,
680E, 310B, 584, 585, 586, W9; Crawlers:
350B, 310G, 750, 1000, Replaces: A26727
(3/8"-24 NF)
ABC362
$5.50
Knob (Bakelite) (For Hydraulic Remote
Levers) fits: 430, 530, 470, 570, 480, 480B,
580, 580B, 680B, 780, W5A, W7, W9A,
W10, W12, W24, W24B, 730, 830, 930, 1030
(All Comfort Kings), Replaces: A14051;
(For Range Transmission Shifter), A32845
(3/8"-24 NF, 1.250" O.D.)
ACS130B
$9.95
CKS084
$8.95
Chassis parts
Case
Clutch Disc
Fits: S, SC w/ hand clutch & 9" dia.
Replaces: 2599AA, 3822AA
ABC3000 $8.95
MHS016
$46.50
ABC1937 $34.95
ABC2501 $19.85
NEW! Clutch Pilot Bearing
Fits: S, SC series
Replaces: O5835AB
(0.787" I.D., 1.850" O.D., 0.551" wide)
NOTE: Sealed bearing.
NEW! Throw-Out Bearing only
Fits: VC, VAC, 200B, 300B, 400B, (430 &
530 w/ dry clutch to SN: 8191147), 511B,
630, Replaces: VTA92, G10610
(1.750" center hole)
NOTE: Carrier not included.
Throw Out Bearing Fits: Some 400 series,
Late 430, 470, 480, 480B, 480C, 530, 570,
580, 580B, 580C, 700, 730, 770, 830, 870
Replaces: A7538, A144152 USA made
NOTE: Visit our website for additional
application & serial number
information.
Clutch Throw-Out Bearing
Fits: 930, 1030, 1070, 1090, 1170, 1175
Replaces: A58982
(2.490" I.D., 4.060" O.D., 0.870" wide)
NOTE: Sealed bearing, no need to
grease.
ABC1955 $1.75
Clutch Housing Drain Plug Gasket /
Washer fits: (430, 530 SN: 8262800 & up);
Some 470 thru 4890
Replaces: A51759
(0.750" I.D., 0.058" thick, 0.973" O.D.)
ABC412
$5.65
NEW! Clutch Alignment Tool
Fits: S & SC up to SN: 5600000
(1-3/8" spline dia., 10 splines, .675" pilot
dia.) NOTE: Check clutch spline dia.
before ordering.
JDS586
Knob (Bakelite) (For Shift, Hydraulics,
Seat Adjuster) fits: D, DC, LA, S, SC, VC,
VAC, 400, 425, 500, 600, 700, 730, 800,
830, 900, 930, 1030, Replaces: A23885,
O3501AB, VT2018 (1.71" dia., 3/8"-24 NF)
NOTE: See website for complete apps.
Gear Shift Boot (Rubber)
Fits: D, S, VC, VA series; 400, 420, 425, 700,
800, Replaces: VT2017, 04867AB, 05920AB
(5/8" hole dia., 1-3/4" bottom I.D.)
Gear Shift Boot (Rubber)
Fits: 200B, 300B, 400B, 430, 470, 480, 480B,
500B, 530, 570, 580, 580B, 600B, 630, 730,
830, 930, 1030, Replaces: A26956, A57876
(9/16" hole dia., 1-3/4" bottom I.D)
Steering column boot
Fits: 770, 870, 970, 1070, 1090, 1170, 1175,
1270, 1370, 1570, 2470, 2670, 2870, 4690
Replaces: A61910
Description
Order # Price
Steering Column Boot.............................................CKS130............$24.95
Steering wheels, parts
Steering Wheels are just like original • All new material
Steel spokes.
Order #
Transmission lever
Fits: 300B - 614B
Replaces: G1085 (lever), B138-82 (roll pin)
USA made
Description
Order # Price
NEW! Case-O-Matic Direct Drive......................... CKS2968........... $48.85
Transmission Lever w/ Roll Pin
NOTE: Bare aluminum.
94
CKS115
Price
$63.25
Steering Wheel
Fits: Early D, S series, L SN: 4402720 & up,
RC SN: 4300000 & up
Replaces: O4935AB, 1995AA
(17" dia., keyed & tapered hub,
7/8" - 1" shaft, 3 double spokes)
Steering wheels, parts cont...
Order #
Price
CKS110
$63.25
CKS066
$49.50
JDS519
CKS087
CKS080
JDS564
$14.95
$49.50
$69.95
$13.45
Steering Wheel
Fits: DC, SC, VA, VAC, VAH, VAI; Also
fits RC SN: 430000 & up when using a 175/8" 3 spoke wheel, Replaces: O7779AB,
VT4051 (17-5/8" dia., keyed & tapered
hub, 7/8" - 1" shaft, 3 spokes)
Order #
Price
$29.95
CKS1125
$32.50
Steering Sector Pin Stud fits: 200B, 300B,
350, 351, 400B, Series (430 & 530 up to
SN: 8199596 & SN: 8201862 - 8209856 w/
manual steering), 500B, 600B,& 630 series
Replaces: A40907 (presses into G13287 or
G13412 sector) (1.437" o/a length, taper
.375" - .550" dia., .390" tall taper, .499" dia.
where presses into sector, .721" flanged
base dia.) USA made NOTE: 3 used per
tractor; Sold individually.
CKS090
$95.00
Steering Wheel fits: 430 SN: 8262800 & up,
470 SN: 8656925 & up, 530 SN: 8262800 &
up, 570 SN: 8656925 & up, 1200, 1470
(All w/ hydrostatic steering)
(18" dia., splined hub, 36 splines, 0.875
dia. shaft) NOTE: Hydrostatic = Orbit
motor directly under wheel. Check
spline count before ordering.
CKS096
$49.95
Steering Wheel Center Emblem
(For CKS080, CKS090)
Replaces: A35603
NOTE: Black background w/ chrome
"3 eagle".
CKS126
$74.95
Steering Wheel fits: 480, 480B, 480C, 480D,
480LL, 580, 580B, 580C, 580D, 580F, 580G,
580H, 584, 584C, 584D, 585, 585C, 585D,
586C, 586D, 680, 680B, 680C, 680E, 680G,
680H, 770, 780, 780B, 870, 970, 1070, 1090,
1170, 1175, 1270, 1370, 1570, 1896, 2090,
2094, 2096, 2290, 2294, 2390, 2394, 2470,
2590, 2594, 2670, 2870, 3294, 3394, 3594,
4490, 4690, 4890; The following Magnums
w/ covered spoke steering wheel: 7110,
7120, 7130, 7140, 7150, 7210, 7220, 7230,
7240, 7250, 8910, 8920, 8930, 8940, 8950
Replaces: A61007, A65544, A164267
(15-1/4" dia., 36 spline, 13/16" shaft)
IHS685
$2.95
Steering Wheel Nut fits: D series, L series,
S series, V series, some 430, 500, 530 w/
manual steering & 600, 730, 830; 900 SN:
8141036 & up, 930 Draft-O- Matic; Also
fits same as CKS080 Steering Wheel
Replaces: 25-1512 (3/4" - 16 NF x .444"
tall)
ABC504
$4.95
Steering Wheel Nut fits: Late 430, 530, 470
(All w/hydrostatic steering orbit motor);
480 thru 2870, 1090 thru 4890
Replaces: A14567, F19646
(13/16" - 20 NEF)
Steering Wheel
Fits: LA, 500, 520, 600, 610, 620;
Serviceable for 900 up to SN: 8141036
Replaces: O7778AB, A11454
(19-3/4" dia., 4 bare spokes, 7/8 - 1" shaft)
Steering Wheel
Fits: V, VC, VI, VO Serviceable for VA,
VAC, VAH, VAI when 16" dia. wheel is
desired, Replaces: VT2230
(16" dia., keyed & tapered hub, 7/8" - 1"
shaft, 3 spokes)
Steering Wheel Acorn Nut
Serviceable for C, D, L, RC, S, VA, VC
series, Early: 200B - (900 up to SN:
8141036), Replaces: A8744
(3/4"-16 NF x .859" tall)
Steering Wheel
Fits: (Early 200, 200B, 300, 300B, 400B,
500B, 600B series), 400 Row Crop series,
700 series, 800 series, Replaces: A7668
(17-3/4" dia., keyed hub, 7/8" - 1" tapered
shaft, 3 COVERED TO CENTER spokes)
NOTE: See website for serial number
breaks.
Steering Wheel
Fits the following tractors w/out exposed
steering cylinders or all manual steering:
200B; 300B, 400B SN: 6120001 & up; 320,
420, 430, 470, 500B series (SN: 6120001
& up), 510B, 511B, 530, 570, 600B series
(SN: 6120001 & up), 610B, 611B; 630, 730
EXCEPT early Grove; 830 EXCEPT early
Grove, 930 series Comfort King; Western
Special SN: 8258382 & up); 1030 Comfort
King & Draft-O-Matic (All w/ Power
steering motor directly under the radiator
Replaces: A20456 (18" dia., splined hub,
40 splines, 3 COVERED TO CENTER
spokes) NOTE: Check spline count
before ordering.
Power Steering Plate
Replaces: A8248
NOTE: Visit our website for additional
serial number breaks.
CKS058
Steering Wheel Center Emblem
NOTE: Plated, background painted.
Steering wheels, parts continue on next page
95
Chassis parts
$49.50
Case
CKS074
Power steering parts cont...
Order #
Price
$59.95
Chassis parts
Case
MFS114
MIS103
Order #
Steering Wheel
Fits: David Brown 770, 780, 880, 885, 990,
995, 996, 1200, 1210, 1212, 3800, 4600
Replaces: K83746, K914001
(17-5/8" dia., keyed tapered hub, 11/16"
- 13/16" shaft, 3 COVERED TO CENTER
spokes) NOTE: Black color; customer can
paint white if desired
IHS673
ABC2507
$14.95
ABC380
$148.50
(Original)
$14.95
Steering Wheel Spinner Knob only
Fits the following w/ double spoke
steering wheel: Early D, DC, S, SC series
Replaces: 04995AB, A26845
NOTE: Rubber.
Power steering parts
Order #
ABC1417
Price
ABC497
$18.25
IHS740
$223.35
(Economy)
$37.45
Power Steering Pump Pulley
Fits: Case models
(5" O.D., 0.675" bore, 1/8" keyway, 0.9715"
total width for 1/2" belt) USA made
ABC1414
ABC1419
$48.75
Power Steering Pump Port Block
(For tractors using Eaton style pump
w/ separate reservoir)
Fits: Case models, Replaces: Eaton 20925,
AG33547A USA made
Char-Lynn Power Steering Slip Fit
Coupler (For IHS555 Generator)
ABC380: (3-3/8" to 3-1/2" adjustable
length)
ABC497: (2-5/8" o/a length)
USA made
Power Steering Priority Flow Control
Valve fits: Case models w/ LIVE
hydraulics (1/2" NPT inlet, 3/8" NPT
return, 1/2" NPT to remote cyls.)
USA made NOTE: Eliminates belt driven
pump, pulleys & brackets. Enables you
to use your hydraulic pump to operate
the power steering. Is preset at 1500 PSI
& 8 gpm. Adjust to your application.
Tie rod boots
Universal Tie Rod Boot
Fits: Case models
Specify size when ordering
(Base x Height x Hole I.D.)
FDS336
JDS736
Order #
$730.50
Char-Lynn Power Steering Torque
Generator w/out port block
Fits: Case models
(7/8" shaft)
IHS555: Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating
Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM;
Recommended Fluid Input - 3 to 4 GPM
96
Steering Shaft Cross & Bearing (U-Joint)
Fits: 200B thru 530, Super 400 thru 800, 730
thru 1030, Replaces: VTA3227, A20435
NOTE: 1 to 4 used per tractor; Sold
individually. See website for complete
applications.
$4.95
Bolt (For ABC1414)
Replaces: Eaton 14126 USA made
NOTE: Yellow zinc; Grade 8.
IHS555
Port Block only
(For IHS555 Generator)
USA made
$10.75
Steering Wheel Spinner
Fits: Case models
NOTE: Aluminum.
CKS1597
Price
$69.95
ABC371
Price
FDS337
ABC368
ABC369
ABC370
Size
FDS336
$3.50
(1.200" base, .475" tall, .500" hole)
JDS736
$3.95
(1.500" base, .735" tall, .550" hole)
ABC371
$3.25
(1.300" base, .965" tall, .500" hole)
FDS337
$3.95
(1.450" base, .600" tall, .550" hole)
ABC368
$3.35
(1.675" base, .900" tall, .625" hole)
ABC369
$2.95
(1.575" base, .600" tall, .650" hole)
ABC370
$3.50
(1.800" base, .765" tall, .740" hole)
Seat, parts
Order #
Price
CKS125
$47.90
IHS728
$39.95
OLS038
OLS149
$51.45
$49.15
FDS299
(LH)
$54.95
FDS300
(RH)
$54.95
FDS299
FDS300
FDS477
$39.95
CKS124
$99.95
Order #
Price
Universal Full Suspension Seat w/ Back
Rest & 5-Angle Base (w/ Slide Track &
Mounting Brackets)
Fits: Case models
NOTE: Can be adapted to fit many
tractors & lawn mowers.
CKS114
$99.95
Rubber Seat Spring Assembly
Fits: (730CK, 830CK both SN: 8253501
& up), 930CK, 1030CK, 1200, 1470 (All
except Grove / Orchard) (All w/ deluxe
seat & flanged bushings)
Replaces: A23947, A34676, A57714
NOTE: Must re-use old side plates.
Inner & Outer Seat Spring Set
Fits: D, DC (both up to SN: 8025739);
DO, DV, S series up to SN: 8027114
Replaces: O4256TF, B18211 (inner),
O5948AB, A26962 (outer) USA made
JDS533
$24.50
Seat Adjustment Handle
Fits: VAC-14, 200B, 300B, 320, 400, 400B,
420, 430, 470, 500B, 530, 570, 600B, 630
(All w/ "Easy Ride" seats)
Replaces: VTA3341, G45001
ACS071
$32.15
Seat Back (Back Rest)
Serviceable for VI; Lawn Mower: B12,
B15, Replaces: 04946AB
(10-5/8" x 5-5/8" curved)
USA made
MIS2679
$32.75
MIS006AC
$29.95
Seat Spring Coil fits: Some L, LA, V, VA,
VAC, VAI, VAO, VC, VI, VO, 500, 600
Wheatland, Replaces: O8145AB
(2-1/4" O.D., 4-3/4" tall)
NOTE: Measure before ordering.
Rubber Seat Spring fits: VAC-14
(1953/54) when equipped w/ optional
"Easy Ride" seat, Replaces: VTA3348
NOTE: Does not include bushings. You
must reuse old ones or purchase new
ones. (2) pins stick up and are hidden
underneath the seat’s framework.
Seat Bushing Repair Kit
Fits: VAC-14 (1953/54) when equipped
w/ optional "Easy Ride" seat
Replaces: V20455, V20456, V20459
USA made NOTE: Must ream/hone
bushings when installed.
Rubber Seat Spring w/out Bushings
Fits: 200B, 300B, 400B, (430 up to SN:
8312174), 500B, (some 530 up to SN:
8312174), 600B, 630, (700, 800 Orchards
only) (All w/ Easy Ride Seat & 1
exposed pin)
FDS299 Replaces: G45003
FDS300 Replaces: G45002
NOTE: FDS299 & FDS300 springs do
not come w/ bushings. You must reuse
old ones or purchase our #FDS477 kit.
Seat Bushing & Pin Kit
(For FDS299, FDS300)
NOTE: Bushings must be reamed/
honed when installed.
NEW! Orange Tractor Seat Pad
Fits: 19" Pan (side to side)
(Foam pad, drawstring)
USA made
Orange & White Tractor Seat Pad
USA made
MIS006BK
$29.95
Black Tractor Seat Pad
USA made
Monroe® seat parts
IHS030
IHS329
IHS325
MHS046
The following seat parts fits: CC series, D series, S series when
equipped w/ Monroe® seat:
Order #
Rubber Seat Spring Assembly
Fits: 400, 420, 425, 600, 700, 800, (730,
830 up to SN: 8253500), 900 (All except
Grove / Orchard), Replaces: A7053
NOTE: Must re-use old side plates.
Chassis parts
$139.30
Case
ABC445
Seat, parts cont...
Price
Description
IHS030
$27.95
Seat Spring Coil
IHS329
$32.50
Shock Absorber
IHS325
$2.05
Rubber Bushing
MHS046
$24.95
Seat Pivot Support Rod
(4" wide) USA made
97
Seat bearing
Brake parts cont...
Fits: D, DC, S, SC (All w/ Knoedler seat)
USA made
Description
Order # Order #
Price
$44.50 Bonded Brake Disc fits: 200B, 300, 300B, 320,
ABC438
$21.95 Bonded Brake Disc fits: LA, 400 thru 415
IHS823
$7.95
Actuating Spring (For Disc Brakes)
Fits: Late D & LA series, 400, 500, 700, 730,
770, 800, 830, 900, 930, 940, 1030
Replaces: O8780AB, A30897, A41816
(1.209" o/a length, 0.105" wire dia., 0.761"
O.D) NOTE: 6 used per tractor;
Sold individually.
ABC561
$7.50
Actuating Spring (For Disc Brakes)
Fits: Late S, SC, SI, SO (All w/ disc brakes);
200B, 300, 300B, 350, 400B, (430 & 530 to SN:
6165269), 500B, 600B, 630
(1.275" o/a length, .105" wire dia.)
Sold individually.
CKS1596
$46.45 Disc Brake Linings w/ Rivets
CKS1598
CKS1601
320B, 350, 400B, 420B, 420BD, (430, 530 up
to SN: 6165269), 500B, 600B, 630, W3, W5,
W5A, Replaces: A49127, G10738, G13019
(6" O.D., 2.245 spline I.D., 17 spline, .550"
disc thickness) USA made
Sold individually.
Price
Case
Seat Bearing................................................................... ABC537........$14.30
NOTE: 2 to 8 used per tractor; Sold individually.
Toolboxes
Chassis parts
Order #
CKS099
Price
series, 500, 600, 610, 700 thru 715B, 730,
Early 770 up to SN: 8282416, 800 thru 815B
series, 830, 870 up to SN: 8675001, 900B,
910B, 930, 930CK, 970 up to SN: 8675001,
1030, Replaces: A40794, A44712, 3973AA,
1975466C1 (7" dia., 24 splines, 3-1/8"
spline I.D.) NOTE: 4 used per tractor;
Sold individually. See website for more
applications.
$43.60 Toolbox w/ CASE Imprint
Fits: D, DC, DO, DV, (Late L), LA, RC, S,
SC, SO, 400, 500
Replaces: 476AA, 2884AA
ABC472
$32.50
Universal Toolbox
Fits: Case models
(4" wide x 16" long x 4-1/4" tall)
Belt pulley brake linings
Order #
Price
CKS1876
$19.95
CKS1879
$19.95 Belt Pulley Brake Lining w/ 4 Rivets
CKS1882
Belt Pulley Brake Lining w/ 4 Rivets
Fits: C, CC, R, RC series
Replaces: O1742AB (lining); 151-178, 2561
(rivets)
(2" x 2")
Fits: D, DC series, LA series, 500, 900, 930
(All w/ hand clutch)
Replaces: O6153AB
(2-7/8" long, 1-7/16" wide)
$19.95
Belt Pulley Brake Lining w/ 4 Rivets
Fits: S, SC, SI, SO, L, LI (All w/ hand clutch)
Replaces: O1412BB1 (lining), 151-178 (rivets)
(2" x 2-1/2")
Brake parts
Order #
Price
CKS129
$28.50
NEW! Brake Lining Kit w/ Rivets
Fits: VA, VO SN: 5554999 & up,
VAC w/ band type brakes
Replaces: VTA3459
(17-7/8" long x 1-11/16" wide x 0.200" thick)
98
CKS1592
Fits: Some D, DC, DI, DO, DV SN: 4511449
to 5600000, Replaces: 4048AA, O7205AB
(8" O.D., 5" I.D.) USA made
NOTE: Sold in pairs. 1 pair used per side
/ 2 pairs used per tractor. No returns if
broken.
Fits: D, DC, DI, DO, DV SN: 5600000 & up
Replaces: 4299AA, O7206AB
(7" O.D., 4" I.D.) USA made
NOTE: 2 pairs used per side - 4 pairs used
per tractor; Sold in pairs. No returns if
broken.
Fits: Some VA, VAC, VAH, S, SC, SO
(All w/ disc brakes)
Replaces: 4298AA, A3010AA
(6" O.D.) NOTE: Sold in pairs. 2 pairs used
per tractor. If lining is bonded rather than
riveted, customer must drill rivet holes.
No returns if broken.
Brake parts cont...
Order #
Price
CKS2647
$2.00
CKS107
$11.95
CKS105
$9.80
MIS1131
MIS2547
Disc Brake Ball fits: D, DC, DO, DV SN:
5201270 & up; LA SN: 5418607 & up; 400,
500, 600, 700, 730, 800, 830, 900, 930, 1030
Replaces: 211-1020, 211-15, O8296AB
(5/8" dia. steel ball) USA made
Disc Brake Ball fits: S, SC, SO SN: 5600000
& up; 200B, 300B, 300 series, 310, 350, 351,
400B, (430, 530 up to SN: 6165269) 500B,
600B, 630 series & 1410 thru 1694 David
Brown, Replaces: BDB78, 211-19, 211-221,
211-1028, 211-1328 (7/8" dia. steel ball)
NEW! Disc Brake Ball fits: 430 SN: 6165269
& up, 470, 480, 480B, 480C, (530 SN: 6165269
& up), 570, 580, 580B, 580C, (770 SN:
8682416 & up), 870, 970, 1070, 1175
Replaces: A42043 (1" dia. steel ball)
Brake Boot
Fits: D series SN: 4511449 - 5600000
Replaces: O7211AB
(2.245" O.D.)
Brake Boot fits: D series SN: 5600001 & up,
LA SN: 5418607 & up, S series SN: 5600001&
up, 400 series except Orchards, 500 series,
600 series, 700, 730, 770, 800, 830, 870, 900,
930, 940, 970, 1030, 1070, (1175 SN: 8715247
& up), Replaces: O8762AB, A27465
(2.675" O.D.)
Price
CKS002
$76.50
CKS003
$32.50
CKS1257
$137.80
ABC1543 $13.95
ABC387
$7.55
ABC1550 $14.95
$33.95 Brake Riveting Tool Kit
(1-1/4" throat, 1/8" dia. rivet punch)
NOTE: Use to rivet brake linings to
existing shoe or band. Includes a tool
to drive out old rivets, a tool to drill &
countersink linings, a tool to peen the new
rivet & instructions. Mounts into vice.
Mounts into vice. Not for use w/ deep
recess shoes.
(For brake shoe & disc relining for most
tractors & clutch pulley brake lining)
(3-3/8" deep throat x 2-1/8" high throat)
USA made
NOTE: Includes 2 punches.
Fits: 300B thru 1175
Replaces: A11507
(1.379" O.D., .875" I.D., .250" wide)
Order # Description / Application
PTO Driven Gear
Fits: VA, VAC, VAI, VAO
Replaces: A29384, VT4021
NOTE: 38 teeth.
PTO Drive Gear
Fits: VA, VAC, VAI, VAO
Replaces: A29385, VT4022
NOTE: 14 teeth.
PTO Drive Gear
Fits: 200B, 300B, 310G SN: 3039619 & up,
320B, 350, 350B, 420B, 420BD, 430, 470,
480, 530, 570, 580, Replaces: G10675
(15 splines) NOTE: 14 teeth.
PTO Seal
Fits the following w/standard non live
PTO: VA thru 630, Replaces: VT3520,
G13803 (1.375" I.D., 2.378" O.D., .312"
width) USA made
PTO Shaft Oil Seal
Fits: 310 thru 420 series Crawlers
Replaces: 23033
(1.375" I.D., 2.000" O.D., .337" width)
PTO & Pump Drive Shaft Inner Seal
Fits: 700, 800 (730, 830 up to SN: 8173401)
(2.254" O.D., 1.375" I.D., .312" wide)
USA made
IHS1545
$17.85
NEW! Belt Pulley Shaft Oil Seal
Fits: Terra Trac, 310 thru Early 310G
Crawler, Replaces: 40634
(2.506" O.D., 1.375" I.D., .372" wide)
USA made NOTE: Narrower than
original.
CKS1963
$54.50
PTO Shield w/out Mounting Plate
Fits: D series, Late L, LA, R series, S series,
VA series, 200B, 300B, 400B, 430, 470, 480B,
500, 500B, 530, 570, 580B, 600, 600B, 630,
900 (All w/ & w/out live PTO)
Replaces: O8303AB, A27335, B555AA,
2172AA USA made
CKS1967
$28.50
Mounting Plate (For PTO Shield)
Fits: D series, Late L, LA, R series, S series,
200B, 300B, 400B, 430, 470, 480B, 500, 500B,
530, 570, 580B, 600, 600B, 630, 900 (All w/
& w/out live PTO), Replaces: O5386AB,
VT2297, G16775 USA made
$89.95 Riveting Tool
Hydraulic part
Description
Order #
Chassis parts
ABC2713 $2.50
Case
ABC1225 $2.15
PTO parts
Price
Draft Control or Case-O Matic Spool Seal......... ABC1514............ $8.95
NOTE: See our website for more applications.
PTO parts continue on next page
99
Front wheel bearing kit
PTO parts cont...
Order #
CKS2630
Price
Fits the following using G1086 or G13065
6 lug front hub (not for H.D. axle): 200B,
211, 300B, 301, 310, 311, 400B, 411B, 430, 470,
530, 570
$23.50
Chassis parts
Case
Mounting Plate (For PTO Shield)
Replaces: VT-2297 USA made
ABC2553 $88.50
MIS118
MIS138
$48.50
$48.50
Description
Order # PTO Shield fits: 310, 310C, 310D, 310E,
310F, (310G up to SN: 3039618), 320, 420,
420B, 420C, Terra-Trac
Replaces: 23040 USA made
NOTE: Bare metal.
Wheel clamp lock nuts
NOTE: No re-threading necessary on worn shafts. Check size
before ordering.
Order #
Price
PTO Over-Running Clutch (1-1/8 Female)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C670F
(1-1/8" - 6 x 1-3/8", 6 spline)
ABC255
$19.75
PTO Over-Running Clutch
(1-3/8" Female & Male)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C660F
(1-3/8" - 6 x 1-3/8", 6 spline)
ABC254
Price
ABC531 $5.15
EACH
ABC384 $5.15
EACH
ABC385 $1.50
EACH
$19.50
Fits: V, VA series thru 600B;
430, 530 w/ hub #G13065
(3/4"-16 UNF thread)
What is back spacing?
To determine back spacing lay your
wheel flat on the ground with the back
of the wheel facing up. Lay a straight
edge across the wheel & measure the
distance from the back side of the
mounting surface to the straight edge.
(I.E. The wheel pictured has a back
spacing of 3-5/8").
Rear Tire Inner Tube Valve
(Air / Water Valve) (New Style)
Fits: Tractor tubes w/ Internal threads
Rear Tire Inner Tube Valve
(Air / Water Valve) (Old Style)
Fits: Tractor tubes w/ External threads
Front wheels / rims
NOTE: To determine the width of Wheels / Rims: Measure
the inside (bead to bead) not outside to outside.
Brass Nut
(For Rear Tire Inner Tube Valve)
Order #
WHS033
Price
3" x 15" Front Wheel (3 Lug)
Fits: VAC series, Serviceable for #VT3584
NOTE: Lugs are welded; Does not have
original look.
Fits: VAI, 200B, 300B, 320, 400B, 420, 430,
500B, 530, 600B, 630, W3
Replaces: O4557AB
(1/2" - 20 NF, 7/8" thread length, 13/16"
hex head) USA made
Order # WHS019
Price
Front Wheel Lug Bolt.............................................. ABC399.............. $2.00
NOTE: 6 used per rim; Sold individually.
100
$74.95
Front wheel bolt
Description
Application
Fits: C, CC, D, DC, DI, DO, DV, RC, S, SC,
SI, SO, (430, 530 when using G45291 hub)
(1"-14 UNF thread)
Rear tire inner tube valves, nut
Order #
Price
Front Wheel Bearing Kit............................................ CKS1795........ $22.95
NOTE: 2 used per tractor; Sold individually.
$67.25
3" x 15" Front Wheel (6 Lug)
Fits: Some 200B, 211B, (430 up to SN:
8262800), Replaces: G10661
(4-5/8" pilot, 3" bolt center to center)
USA made
NOTE: Tricycle only.
Tires, tubes cont...
Front wheels / rims cont...
Order #
WHS022
WHS070
$82.75
$86.45
Front Wheel (6 Lug) w/ (4) Wheel Weight
Holes fits: Some Late VA thru 830 series
Replaces: G10660, G57005, V13830,
VTA1303 (4.5" x 16", Pilot hole = 4.625",
6" bolt circle, 4" back spacing) USA made
NOTE: For 5:50 x 6:00 x 16" tires.
6" x 15" Front Wheel (6 Lug) w/ (4) Wheel
Weight Holes fits: Some 430, 470, 480, 530,
570, 580, 580B & others
(6" bolt circle, 4.625" pilot hole,
4-3/4" back spacing) USA made
Holes fits: Some 430 - 1175 & others
(6" x 16", Pilot hole = 4.625", 6" bolt circle,
Holes fits: Some 730 thru 1175 series
Replaces: A57879
(8" x 15", 6" bolt circle, 4.625" pilot,
Order #
Price
WHS061
$80.25
EACH
Rear Tube only
(For 13.6, 14.9 x 28" Tires)
WHS062
$56.95
EACH
Rear Tube only (For 9.5 x 32" Tires)
WHS063
$64.95
EACH
Rear Tube only (For 11.2, 12.4 x 34" & 36"
Tires)
WHS064
$65.25
EACH
Rear Tube only (For 11.2, 12.4 x 38" Tires)
WHS2513 $89.95
EACH
Order #
Price
MIS061
$3.65
Rear Rim Bolt Assembly w/ Nut &
Washer Fits: 24" & 28" Rear Rims
(3-1/2" NC hex head bolt w/ washer)
NOTE: 4 to 6 used per rim;
Sold individually.
MIS063
$3.75
Rear Rim Bolt Assembly w/ Nut
Fits: 28" Rear Rims
(5/8 x 18 x 2-1/2" NF Carriage bolt)
USA made NOTE: 4 to 6 used per rim;
Sold individually.
MIS121
$0.50
ABC397
$2.75
NOTE: Tubes are for BIAS ply
Also not for recreational
Rear Tube only(For 12.00 x 38", 13.00 x 38",
13.6 x 38", 14.00 x 38", 14.9 x 38", 15.5 x 38"
tires)
Rear rim bolts
Tires, tubes
tires only, not for radial tires.
Description / Size
use. Need a tire or tube not
listed? Call technical service.
Description / Size
Flat Washer (For MIS063)
NOTE: 6 needed per wheel;
Sold individually.
Rear Rim Lug Bolt
Fits: 200B, 300B, 320B, 400B, 420B, 430,
470, 480, 500B, 530, 570, 580, 600B, 630,
W3 (All w/ stamped steel dish)
Replaces: 030739HT (9/16" x 18 NF,
1-1/8" thread length, 7/8" hex head)
Can also be a front rim lug bolt on some
applications.
Order #
Price
WHS052
$83.75
EACH
Triple rib, 6 ply Tire only
WHS053
$14.80
EACH
Tube only (For 4.00, 5.00,
5.50 x 15" Tires)
WHS047
$91.95
EACH
(5.50 x 16")
WHS048
$105.75
EACH
(6.00 x 16")
Rear rims / wheels - USA made
WHS049
$110.95
EACH
Triple rib, 6 ply, Tire only
(6.50 x 16")
Measure the inside (bead to bead) not outside to outside.
WHS050
$15.25
EACH
Tube only
(For 5.50, 6.00, 6.50 x 16" Tires)
WHS060
$37.95
EACH
Rear Tube only
(For 7.50, 8.3, 9.5 x 24" Tires)
WHS059
$53.75
EACH
Rear Tube only
(For 11.2, 12.4 x 24" Tires)
WHS058
$56.55
EACH
Rear Tube only
(For 11.2, 12.4 x 28" Tires)
NOTE: To determine the width of Rims / Wheels:
Order #
Price
WHS002
$133.95
Rear Rim (4 Loops)
Fits: Some 200B, 210B, 300B, 301B,
310B, 311B, 320B, 400B
Replaces: G12006
(10" x 24", 14" c.c. loops)
NOTE: Use 5/8" bolts. Valve stem
hole is on side closest to loops.
Rear rims / wheels continue on next page
101
Chassis parts
WHS043
$65.60
Case
WHS042
Price
$71.50
Rear rims / wheels - USA made cont...
Price
$250.75
WHS028
(10" x 28")
$250.75
Chassis parts
Case
Order #
WHS027
(9" x 28")
WHS016
(9" x 28")
$148.05
WHS004
(10" x 28")
$155.00
WHS012
(11" x 28")
$164.95
Description / Size
Rear Rim
Fits: VAC
WHS027 Replaces: VT4323
WHS028 Replaces: VT5570
(14-1/2" c.c. dimples)
NOTE: Like original.
Rear Rim (6 Loops)
Fits: 200 & up
WHS013
$178.95
Replaces: G12002
(12" x 28")
WHS012 Replaces: G12003
WHS013 Replaces: G45710
WHS029
(10" x 38")
$199.95
WHS018
(11" x 38")
$305.95
Rear Rim (Deep Drop Center)
Fits: Some DC4, SC
WHS029 Replaces: O7960AB
WHS021
$309.75
WHS018 Replaces: O8203AB
(14" x 38")
NOTE: Rims have 34" dia. center
hole for cast centers & includes
stop block except for WHS029.
WHS029 does not include stop
block, must reuse old.
Rear Rim (Double Bevel)
WHS036: Fits: Some 300, 300B,
WHS035
$282.95 302, 312B, 350, 351, 511B, 611B,
(10" x 38")
630 & others, Replaces: G45716,
WHS037
$294.95 G46172 NOTE: 8 drive lugs total.
WHS036
(12" x 36")
$305.20
WHS035: Fits: Some 400 series
using 10" x 38" double bevel rim
Replaces: O10920AB
NOTE: Has 18 drive lugs.
WHS037: Fits: Some 400, 700, 730,
800, 830, others, Replaces: A28272,
O10922AB
WHS024: Fits: Some 700, 730, 800,
830 & others, Replaces: A11081,
A33223
102
Order #
Price
WHS1613
$235.95
WHS046
$61.75
Description / Size
Flat Base Rear Rim (Blank Center)
(For Stamped Steel 9 Bolt Pattern
Rims) fits: Case models
(10" x 38") NOTE: Bare finish.
Customer must reuse old center.
Must weld or rivet
Reinforcing Ring (For 9 bolt pattern rim)
NOTE: Repairs existing 9 bolt rim.
Rear spinout rims, parts
NOTE: Stop holes are angled.
Order #
Price
ACS028
$420.00
ACS026
$435.00
Rear Spinout Rim (4 Rails)
Fits: Some 200B & up
Replaces: G13266
(11" x 28")
USA made
Rear Spinout Rim (4 Rails)
Fits: Some 430 - 570 series
(12" x 28")
USA made
WHS008
$450.50 Rear Spinout Rim (4 Rails)
MIS108
$16.50
Rear Spinout Rim Stop
(For 90° Drilled Rim Rail)
Fits: Case models
Replaces: K917337
USA made
NOTE: Will not fit the rims that we sell.
MIS109
$14.95
Rear Spinout Rim Stop - Parallel Drilled
Fits: Case models
Replaces: A9406
Fits: Some 200B - 570 series
(13" x 28")
USA made
NOTE: Drilled for both style stops
(1 rail for MIS109 & 1 rail for
MIS108).
$297.60
(12" x 38")
WHS024
(14" x 38")
Rear rims / wheels - USA made cont...
NOTE: Use MIS109 for the listed spinout
rims.
MIS110
$8.95
Stop Bolt (For Rear Spinout Rim Stops)
Fits: Case models
Replaces: A9440, K200142, G15442
(2-5/8" o/a length)
USA made
Eagle hitch latch set, parts
Drawbar, top-links, part cont...
Price
$124.50
4-Pc Eagle Hitch Latch Set
Fits: D series, S series, VA series, 200B, 300,
300B, 310, 310C, 320, 320B, 350, 400B, 420,
420B, 420BD, 420 Dozers, 425, 430, 500B,
530, 540, 600B, 630, 700, Early 730, 800, 830
Category 1 NOTE: Will also fit Case SC
& DC if machined to a larger dia. inside
latch. Includes 1-CKS009, 1-CKS010,
2-CKS011
CKS010
CKS011
Price
Top-Link Category 2
Adjustable w/ forged ends & 1" hole
Fits: Case models
(16-3/4" tube length)
ABC2010
$24.00
FDS024
$64.50
CKS1597
CKS008 4-Pc. Eagle Hitch Latch Set components
$39.45
The following parts (Sold separately) fit CKS008 4-Pc. Eagle
Hitch Latch Set:
Stabilizer Kit fits: 200B, 300B, 320, 400B,
420B, 430, 530 (bars only), Replaces:
G16757 Category 1 NOTE: Primed red.
Flat bars not turnbuckles. Kit includes
(2) arms, (2) brackets, pins.
Order #
Price
CKS009
$26.50
RH Lock only
Replaces: 6168A, A26241
USA made
CKS010
$26.50
LH Lock only
USA made
CKS011
$39.50
3-point top link pins, parts
Latch only
ABC1431
CKS1597
$14.95
Description
Adjustable Stabilizer Bar
(For tractors w/ Category I 3-point)
Adjustable from 27-1/2" to 37" length,
23" center tube length, 7/8" threaded
ends, 7/8" pin holes NOTE: Adjustable
ends for desired length. Normally 2 used
per tractor; Sold individually.
Order #
Price
3-Point Top Link Pin fits: Case models w/
a Category 1, 3-point hitch (3/4" O.D.,
2-3/4" usable length, 4-5/8" o/a length)
Eagle Hitch Leveling Knob (Rubber)
Fits the following w/ eagle hitch: VAC
thru 830, Replaces: O4995AB, A26845
ABC1427
$3.25
ABC1429
$4.25
MIS119
$0.35
ABC1433
$2.15
Drawbar, top-links, part
Order #
FDS022
Price
$46.95
Standard Drawbar Category 1
Fits: Case models
(1" x 2-1/2" x 26", 7/8" pin size)
FDS211
$29.99
Drawbar Lock Category 1
(For FDS022)
FDS023
$23.50
$1.90
Top-Link Category 1
Adjustable w/ forged ends & 3/4" hole
Fits: Case models
(16" tube length)
Category 1 3-Point Top Link Pin
Fits: Case models w/ a Category 1,
3-point hitch (3/4" O.D., 4-3/4" usable
length, 6-1/2" o/a length)
Category 2 3-Point Top Link Pin
3-point hitch (1" O.D., 4-1/4" usable
length, 6" o/a length)
3-Point Lynch Pin fits: Case models
equipped w/ a 3-Point Hitch using a
.420" dia. pin, Replaces: A33509
(1-5/8" usable length)
3-Point Lift Arm Category 2 to a Category
1 3-Point Hitch Reducer Bushing
3-point hitch switching to a Category
1 3-point hitch (1-1/8" O.D. 7/8" I.D.,
1-3/8" o/a length)
103
Chassis parts
CKS009
Order #
FDS346
Case
Order #
CKS008
Deluxe tractor umbrellas
Four oil-tempered spring steel bows are
locked into place with individual spring
clips, providing ease of operation and
a rigid framework for the cover. Frame
constructed of tubular steel. All metal
parts, including frame and mounting
brackets, zinc plated for rust resistance
and lasting appearance. 54" square cover
is made of durable polyester material.
Each corner is double reinforced and
has heavy steel grommets. Complete
with universal mounting bracket. Can
be mounted on side of fender, rear end /
axle housing, foot platform.
Order #
Price
DEC059
$44.00
L
DEC062
$48.00
LA
DEC256
$48.00
RC (Gray tractor)
DEC257
$48.00
RC (Red tractor)
DEC067
$40.00
S
DEC064
$40.00
SC
DEC066
$40.00
VA
DEC065
$40.00
VAC
DEC261
$40.00
VC
DEC339
$36.00
200 Triple Range
DEC307
$36.00
300 Triple Range
DEC262
$32.00
300 Script
DEC263
$32.00
400 Script
DEC380
$44.00
400 Script Super diesel
DEC308
$36.00
400 Case-O-Matic
DEC306
$64.00
500 diesel (Yellow)
DEC340
$36.00
500 Triple Range
& painted. Paint must be completely dry prior to installation
DEC264
$48.00
600 Script
(usually 3 - 4 weeks). Wash area with soap & water (new paint
DEC309
$36.00
included) on which decal is to be placed.
600 Case-O-Matic
DEC310
$36.00
700 Dual Range
DEC311
$44.00
800 Case-O-Matic diesel
Case
ABC2372
Chassis parts / Miscellaneous
Mylar decals - USA made cont...
ABC2362
Description
Order # Price
Orange Deluxe Umbrella w/ Brackets ................ ABC2372........$192.80
White Deluxe Umbrella w/ Brackets ................... ABC2362........$192.80
Mylar decals - USA made
(Unless otherwise noted):
INSTRUCTIONS: Have the pitted area filled, sanded smooth
FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to
border of design where possible prior to removing white
Description
backing paper. Lightly spray the area with window cleaner (do
not use window cleaner in aerosol can). Peel white backing
paper from decal and place in position. Squeegee window
cleaner from under decal beginning in center and working
DEC462
outward. If air bubbles occur, puncture with pin & smooth
DEC065
down. Please note: These decals have been printed on a tough
mylar film using mylar ink. A pressure sensitive adhesive
has been employed on the back of the mylar to insure good
adhesion to any clean, hard surface.
DEC308
DEC464
FOR VINYL CUT DECAL (NO FILM BETWEEN LETTERING)
SPECIAL ORDER ONLY: Peel backing paper from decal. The
decal will be stuck to the application paper. Align the decal
using the design, not the application paper, and firmly press
decal into place. Slowly remove the application paper starting
at one corner. Please note: The colors are fused into the vinyl
eliminating stacking.
Caution: Inspect all decal pieces before applying to tractor.
NO REFUNDS on mylar decals if applied to surface and/or if
damaged. NO REFUNDS on vinyl cut decals. Store in a cool,
dry place. Do not soak in water.
Order #
Price
DEC462
$12.50
Case (4" x 15)
DEC464
$10.50
Case Eagle (6" tall)
DEC060
$44.00
C
DEC061
$44.00
CC
DEC063
$41.00
DC
104
Description
I & T Shop Service™ manuals - Printed in USA
An I & T Shop Service™ manual tells you how to take a tractor
apart, how to fix it and how to put it back together again.
These are authentic manuals that deal with repairs in the
language of a mechanic with an easy to use format. They
include valuable information as to specifications, torques, etc.
illustrated by exploded views and photos. If you are in serious
REP2969
REP005
Case
REP004
repairs or restoration, you need an I & T Shop Service™ Manual.
It will offer many short cuts and save you time.
C201
Order #
C201
C202
C203
C202
C203
Order #
Price
REP004
$40.50
REP2643
Description
D series (Service manual)
Price
Description
$34.95
J.I. Case Collection: C series, D, L, LA, R, S,
V, VA series, 200B, 300, 300B, 350, 400 series,
400B, 500B, 600B, 700B, 800B
REP2969 $18.95
NEW! L (Operator manual)
REP005
$40.50
J.I. Case Collection: 430 series, 470, 500
series, 530, 570, 600, 630, 730 series, 830,
900B, 930, 1030 NOTE: Includes wiring
diagrams for 730 thru 1030 only.
S series (Tractors & Engines)
(Service manual)
REP080
$40.50
VA series, VAC, VAE, VAH, VAO, VAS
(Service manual)
$34.95
$34.95
J.I. Case Collection: 770, 870, 970 series
(All w/ Gas); Case & David Brown: 770,
780, 880 SN: 52100 & up), 885, 970, (990 SN:
467870 & up), 995, 1070, 1090, 1170, 1175,
1200, 1210, 1212, 1270, 1370, 1410, 1412,
1570, 3800, 4600 (All w/ diesel)
NOTE: Includes wiring diagrams for Case
770 thru 1570.
REP2643 $14.95
Miscellaneous
REP080
Char-Lynn Power Steering (Owner's
manual) USA made
NOTE: Includes installation, operation,
maintenance & trouble shooting
information on the pump & torque
generator.
Parts manual reprints - Printed in USA
A Parts Manual (reprint only) has exploded views of all parts
on the tractor. With numbered pictures giving you great detail
Service manual reprints - Printed in USA
A Service Manual Reprint tells you how to take the tractor
apart, how to fix it and how to put it back together again.
It is a reprint of the manual that the factory furnished the
dealer’s shop service department, and was not sent or given to
individual retail customers. It deals with repairs in the language
of a mechanic. Often times it includes valuable information as
to specifications, torques, etc. A service manual reprint will
offer many short cuts and save you time!
on assembly and disassembly. It also gives you a guide, with
numbers, for ordering parts, and makes you seem much more
informed when talking with a dealer. Many service manuals,
after telling you how to disassemble & repair in detail, will
simply say "reassemble". If you have your PTO in the wash tank,
in pieces, without notes, you have a problem. The parts manual
can help you out with an exploded view of the PTO unit, and
you can see immediately how it all goes back together. You
need a parts manual!
Operator manual reprints - Printed in USA
A Operator's Manual (reprint only) sometimes referred to as
the Owner's Manual is the manual that came with the tractor. It
is the manual that was given to the ultimate consumer by the
manufacturer. It can be compared to the manual you receive
in the glove box of a new car. This manual gives the owneroperator instructions, shift patterns, capacities (anti-freeze,
REP1736
Order #
Price
REP1736
$47.95
For the following w/out Eagle hitch
SN: 4511449 - 5600000: D, DC, DV
REP1738
$49.95
VA, VAC, VAC14, VAE, VAO
crankcase, etc.) and adjustment procedures (brakes, clutch, etc.)
This is a very useful and valuable tool in operating your tractor.
REP1738
Description
105

Case 2 - Steiner Tractor Parts

Transcription

Similar documents

Case 2 - Steiner Tractor Parts

Case - Steiner Tractor Parts

Heavy Duty Catelogue