Standard - Oxylitre

Transcription

Standard - Oxylitre
H E A L T H C A R E
E Q U I P M E N T
&
S E R V I C E S
MEDICAL PRODUCTS FOR:
• Oxygen Therapy
• Pain Relief
• Suction
• EMS
PRODUCT GUIDE
R E F 10.0
MAKES THE DIFFERENCE
E s ta blished 1961
INTRODUCTION
The difference starts here...
Innovation
Oxylitre manufacture, supply and maintain the widest range of high quality Oxygen, Suction
and Entonox therapy equipment. Equipment that offers unrivalled standards of design and
engineered technology that provides hospital and emergency (EMS) services the world over
with flexible effective solutions when they are required.
Reliability
Every component of every piece of equipment we supply is engineered to provide maximum
operational reliability and is designed to deliver throughout its life, with the same dependable
performance as the day it was first commissioned.
Warranty
All Oxylitre manufactured products currently carry a 7 year Mfg warranty.
Performance
Oxylitre’s range of Oxygen, Suction and Entonox equipment brings to the Healthcare
market a unique combination of precision and performance together with cost-effective
proven technology.
Support
Oxylitre’s high quality equipment is complemented by a wide range of services including
technical and emergency support, installation, system design, consultancy, in-house training,
In-house repairs & on-site servicing.
When you select Oxylitre you can have the confidence that you are specifying technology that
is designed specifically for your service and matched by a responsive flexible service that has
been developed around your needs.
Hospitals
Clinics
Emergency Services
1
In-house or On-site Repair & Service Facilities
When you choose Oxylitre Medical Services, your choice brings you much more than efficient
reliable technology, it brings you complete peace of mind. The name Oxylitre means you can have
confidence, not only in the performance of the equipment but in the company’s efforts
to give you complete satisfaction with the levels and the quality of service you require.
Oxylitre services
Oxylitre Medical Services provides a comprehensive range of service options for customers within
the UK all supported by fully trained field engineers and backed by the expertise of Oxylitre’s
Technical Support personnel.
• On-site quarterly, half yearly or annual service contracts
• On-site or in-house maintenance agreements
• On-site or in-house repair facilities
• Priority emergency call-out options
• All equipment serviced to current standards
• Planned preventative maintenance programs
• Other manufacturers products repaired & serviced
Substantial investment by Oxylitre in both product development and engineering support services
guarantees that the company is always one step ahead. On a day-to-day basis that means healthcare
personnel can always place their faith in Oxylitre’s lifesaving equipment and services. From a
business perspective, it means Oxylitre is the only choice for reliable, cost effective solutions.
National Repair & Service Contact Details: (UK only)
REPAIRS:
Tel:
0161-872-6322
E-mail:
[email protected]
SERVICE:
Tel:
0161-872-6322
Email:
[email protected]
Fax for both: 0161-848-7914
For ALL contact details please see page 29
In-House Research and Development
In House Manufacturing
In-House & On-Site Repair/Service
1
2
CATALOGUE CONTENTS
Product Ranges
Pages
Medical Regulators (Standard Type) & Accessories
Medical Regulators (Compact Type)
Pain Relief (Entonox Demand) Units & Accessories
Pipeline Flowmeters & Accessories
Pipeline Suction Controllers & Accessories
Portable Suction (AC & DC) & Accessories
Mobile Electrical Suction (AC) & Accessories
Injector Suction Systems & Accessories
3-5
6-7
8
9-11
12-13
14-15
16
17
Pipeline Accessories (BS)
Hose Assemblies (various types)
Extensions Hoses
Back Up Hose Systems
Twin Adaptors
BS Probes
Self Sealing Valves
NIST Couplings
HP Hose & Fittings
Pipeline Reducing Regulator
18
18
18
19
20
20
21
21
21
Cylinder Accessories
Cylinder Trolleys
Cylinder Cradles
Cylinder Stands
Cylinder retaining Rings
Cylinder Keys
22
22
22
22
22
Rail System & Fittings
Rail System only (various lengths)
Rail Clamps
Parts
UK Cylinder Data
23
23
23
24
Sphygmomanometers
Instruments, Accessories & Parts
25
Service Exchange Products
Regulators
Flowmeters
Portable Suction
Suction Controllers
Entonox Demand Units
Injector Suction
Twin Adaptors
Others
26
26
26
26
27
27
27
27
Hire Equipment
Electrical Suction (AC)
Regulators
Cylinder Trolleys
27
27
27
Index
Other Information & Services Available, please see our contact information on page 29
or visit our website: www.oxylitre.co.uk
2
Ambulance Piped Gas Systems & Equipment • On-Site Service/Repair (PPM Contracts etc, UK Only)
• Factory Service/Repair of Products (UK Only) • Spare Parts & Service Kits
• Service Training • User Instructions • Warranty Information
28
MEDICAL REGULATORS (Standard)
3
138 Bar Type
R1600
STANDARD REGULATOR & FLOWMETER BN
STANDARD REGULATOR & FLOWMETER PI
• Bull Nose Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• HP Gauge
• Flowmeter: Various Flow Rate
• Pin-Index Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• HP Gauge
• Flowmeter: Various Flow Rate
R1600
R1600-4
R1600-4A
R1600A
R1600H
R1600-C3
R1600-C12
R16005
R16005-4
R1600A5
R1600-C35
R1600-C125
Oxygen 0 to 15Lpm
Oxygen 0 to 4Lpm
MA-4 0 to 4Lpm
MA-4 0 to 15Lpm
O2 + Humidifier 0 to 15Lpm
CO2, 0 to 3Lpm
CO2 0 to 12Lpm
Oxygen 0 to 15Lpm
Oxygen 0 to 4Lpm
MA-4 0 to 4Lpm
CO2, 0 to 3Lpm
CO2, 0 to 12Lpm
R16005
STANDARD REGULATOR TWIN GAUGE BN
STANDARD REGULATOR TWIN GAUGE PI
• Bull Nose Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• HP Gauge
• Flow Gauge: 0 to 15Lpm
• Pin-Index Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• HP Gauge
• Flow Gauge: 0 to 15Lpm
R1500
R1500A
R15005
R15005A
Oxygen 0 to 15Lpm
MA-4 0 to 15Lpm
R1500
Oxygen 0 to 15Lpm
MA-4 0 to 15Lpm
R15005
STANDARD REGULATOR BN
3/8bsp OUTLET MALE
STANDARD REGULATOR PI
3/8bsp OUTLET MALE
• Bull Nose Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• HP Gauge
• Outlet 3/8bsp male
• Pin-Index Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• HP Gauge
• Outlet 3/8bsp male
R1610
R1610A
R1610-C
R1610N
R16105
R16105A
R16105-C
R16105N
Oxygen
MA-4
CO2, 11/16 Nut (Tubing Outlet)
N2O, 11/16 Nut (Tubing Outlet)
R1610
Oxygen
MA-4
CO2 (Tubing Outlet)
N2O, L/H (Tubing Outlet)
R16105
Accessories see page 5
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
3
4
MEDICAL REGULATORS (Standard)
138 Bar Type
STANDARD REGULATOR BN
& SELF SEALING VALVE
STANDARD REGULATOR PI
& SELF SEALING VALVE
• Bull Nose Cylinder Fitting
• Brass Chrome Plated Body
• HP Gauge
• BS Gas Indexed Self Sealing Valve
• Pin-Index Cylinder Fitting
• Brass Chrome Plated Body
• HP Gauge
• BS Gas Indexed Self Sealing Valve
R1601
R1611
R1621
R1601N
R1601V
R16015
R16115
R16215
R16015N
R16105/E
Oxygen
MA-7
MA-4
N2O, 11/16
Oxygen (Vertical)
Oxygen
MA-7
MA-4
Nitrous Oxide
Entonox
R16015
R1601
STANDARD REGULATOR PRE-SET
STANDARD REGULATOR PRE-SET
• 11/16 ”BODOK” Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• 1/8bsp male Outlet (non return)
• 11/16 BULL NOSE Cylinder Fitting
• Brass Chrome Plated Body
• Pre-Set 4Bar
• 1/8bsp male Outlet (non return)
R1605
R1605N
R1605L
R1605L-N
R1605-BN
R1605N-BN
R1605L-BN
R1605LN-BN
Oxygen
Nitrous Oxide
Oxygen L/H
N2O, L/H
R1605
Oxygen
Nitrous Oxide
Oxygen L/H
N2O, L/H
R1605-BN
STANDARD REGULATOR CO2 ADJUSTABLE
STANDARD REGULATOR CO2 ADJUSTABLE
• 14TPI Female Fitting
• Brass Chrome Plated Body
• HP Gauge
• 2nd Stage Regulator & 0 to 15psi
• Pin-Index Cylinder Fitting
• Brass Chrome Plated Body
• HP Gauge
• 2nd Stage Regulator & 0 to 15psi
Output Gauge
Output Gauge
• Fine Adjustable Output Pressure
• Tubing Outlet
• Fine Adjustable Output Pressure
• Tubing Outlet
R1606
R16065
CO2
R1606
CO2
R16065
Accessories see page 5
4
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
MEDICAL REGULATORS (Standard) & ACCESSORIES
5
138 Bar Type
STANDARD REGULATOR HP TWIN GAUGE BN
• Bull Nose Cylinder Fitting
• Brass Chrome Plated Body
• HP Gauge
• LP Gauge, 0 to 150psi (10-35Bar)
• Adjustable Output Pressure
• BS Indexed Self Sealing Valve Outlet
R1700
R1700
R1700B
R1700-MA4
R1700A
R1700B1
R1700H
MA-7
Oxygen
MA-4
MA-7 (3/8bsp Outlet)
O2, 4Bar (3/8bsp Outlet)
Helium
STANDARD REGULATOR HP TWIN GAUGE PI
• Pin-Index Cylinder Fitting
• Brass Chrome Plated Body
• HP Gauge
• LP Gauge, 0 to 150psi (10-35Bar)
• Adjustable Output Pressure
• BS Indexed Self Sealing Valve Outlet
R17005
R1700B5
R17005-MA4
R17005A
R1700B15
R17005
MA-7
Oxygen
MA-4
MA-7 (3/8bsp Outlet)
O2, 4Bar (3/8bsp Outlet)
ACCESSORIES (for R16-- & R14—type Regulators)
SP554
BS110
SP45
OX010
H110
SP554
SP45
SP46
SP46B
IS1174
IS1106
IS1140
OX010
BS110
PC30
Humidifier (Bubble Type) Autoclaveable (250ml)
Humidifier Adaptor 1/2 BSF × 9/16 UNF
Tubing Nipple male 1/2 BSF
Tubing Nipple female 9/16 UNF (WHITE for O2)
Tubing Nipple female 9/16 UNF (BLACK for AIR)
Oxygen Connecting Tube (2m)
Facemask, O2 Adult
Facemask, O2 Paediatric
PI BODOK Seal
BN “O” Ring, Std
BN “O” Ring, Sabre
SERVICE KITS
SK40
SK60
SK70
SP46
Service Kit for R14-- Range of (BN & PI) Regulators
Service Kit for Oxylitre R16-- Range of (BN & PI) Regulators
Service Kit for R17-- Range of (BN & PI) Regulators
H110
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
5
6
MEDICAL REGULATORS (Compact)
138 Bar Type (200 Bar Also Available)
COMPACT REGULATOR & FLOWMETER BN
COMPACT REGULATOR & FLOWMETER PI
• Bull Nose Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Compact Flowmeter Various Flow Rates
• Pin-Index Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Compact Flowmeter Various Flow Rates
R1400
Oxygen, 0 to 15Lpm (Brass F/M)
R1400M Oxygen, 0 to 15Lpm (Moulded F/M)
R1400A MA-4, 0 to 15Lpm (Brass F/M)
R1400MA MA-4, 0 to 15Lpm (Moulded F/M)
R1400H Oxygen, 0 to 15Lpm (Brass F/M)
R1400MH Oxygen, 0 to 15Lpm (Moulded F/M)
R14005 Oxygen, 0 to 15Lpm (Brass F/M)
R14005M Oxygen, 0 to 15Lpm (Moulded F/M)
R1400A5 MA-4, 0 to 15Lpm (Brass F/M)
R1400MA5 MA-4, 0 to 15Lpm (Moulded F/M)
R14005H Oxygen, 0 to 15Lpm (Brass F/M)
R1400M5H Oxygen, 0 to 15Lpm (Moulded F/M)
R1400
R14005
COMPACT REGULATOR 5/8bsp OUTLET BN
COMPACT REGULATOR 3/8bsp OUTLET PI
• Bull Nose Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Outlet 3/8bsp male
• Pin-Index Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Outlet 3/8bsp male
R1410
R1410A
R14105
R14105A
Oxygen
MA-4
R1410
Oxygen
MA-4
R14105
COMPACT REGULATOR BN
& SELF SEALING VALVE
COMPACT REGULATOR PI
& SELF SEALING VALVE
• Bull Nose Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• BS Gas Indexed Self Sealing Valve
• Pin-Index Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• BS Gas Indexed Self Sealing Valve
R1401
R1421
R14015
R14215
R14015/E
Oxygen
MA-4
R1401
Oxygen
MA-4
Entonox
R14015
Accessories see page 5
6
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
MEDICAL REGULATORS (Compact)
7
138 Bar Type (200 Bar Also Available)
COMPACT SELECT-A-FLOW REGULATOR BN
COMPACT SELECT-A-FLOW REGULATOR PI
• Bull Nose Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Select-a-Flow Flowmeter
• Pin-Index Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Select-a-Flow Flowmeter
•
R1403
(11 flow settings)*
Tubing Outlet
R1403
R1403-10
R1403A
R14033
R1403/L
•
Oxygen, 0 to 15Lpm
Oxygen, 0 to 15Lpm 3/8 Outlet
Air, 0-15Lpm
Oxygen, 0 to 3Lpm
Oxygen, 0 to 1.1Lpm
R14035
R14035
R14035-10
R14035A
R140335
R1403/L5
Oxygen, 0 to 15Lpm
Oxygen, 0 to 15Lpm 3/8 Outlet
MA-4, 0 to 15Lpm
Oxygen, 0 to 3Lpm
Oxygen, 0 to 1.1Lpm
COMPACT SELECT-A-FLOW
REGULATOR & SELF SEAL VALVE BN
COMPACT SELECT-A-FLOW
REGULATOR & SELF SEAL VALVE PI
• Bull Nose Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Select-a-Flow Flowmeter
• Pin-Index Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• Select-a-Flow Flowmeter
(11 flow settings)*
(11 flow settings)*
• Tubing Outlet
• BS Indexed Self Sealing Valve
R1405
(11 flow settings)*
Tubing Outlet
R1405
Oxygen, 0 to 15Lpm
R1425
MA-4, 0 to 15Lpm
Oxygen, 0 to 15Lpm, L/Hand
• Tubing Outlet
• BS Indexed Self Sealing valve
R1401L/H
R14055
R14055
R14055-LH
R14255
Oxygen, 0 to 15Lpm
Oxygen, 0 to 15Lpm, L/Hand
MA-4, 0 to 15Lpm
*FLOW SETTING INFORMATION:
All SELECT-a-FLOW Flowmeters have a range of 11 settings that
vary depending on the Maximum Flow Rate.
0 to 15Lpm:
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 6.0, 8.0, 10.0, 15.0
0 to 3Lpm:
0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 3.0
0 to 1.1Lpm:
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1
Accessories see page 5
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
7
8
PAIN RELIEF (Entonox Demand) UNITS/ACCESSORIES
PRU001
Entonox PAIN RELIEF SYSTEMS Basic
Entonox PAIN RELIEF SYSTEMS Complete
• Demand Head c/w BS Hose & Probe
• Regulator & Self Sealing Valve Pin-Index
• 1 x PI Key & Cord
• 1 x Adult Facemask
• 1 x Bacterial Filter Disk
• 1 x Pkt 5 Mouthpieces
Demand Head c/w BS Hose & Probe
Regulator Self Sealing Valve Pin-Index
& Carry Case (Blue)
1 x PI Key & Cord
1 x Adult Facemask
1 x Child Facemask
1 x Bacterial Filter Disk
1 Pkt 5 mouthpieces
PRU001 Complete System - without Case
(1.5m hose length)
PRU001L Complete System - without Case
(3m hose length)
PRU002
•
•
•
•
•
PRU002
PRU002L
Entonox COMPACT REGULATOR & S/S
VALVE PI
Entonox PAIN RELIEF DEMAND HEAD only
Demand Head c/w BS Hose & Probe
1 x Adult Facemask
1 x Bacterial Filter Disk
1 x Pkt 5 Mouthpieces
•
•
•
PRU003
PRU003L
PRU003
Demand Head c/w
1.5m hose length
Demand Head c/w
3m hose length
• Pin-Index Cylinder Fitting
• Stainless Steel Body
• Pre-Set 4Bar
• HP Gauge (luminous dial)
• BS Gas Indexed Self Sealing Valve
R14015/E
011-4
R14015/E
R24015/E
Entonox (138 Bar)
Entonox (200 Bar)
CARRY CASE only
BACTERIAL FILTER DISKS
• Heavy Duty Zip Closing System
• Internal Cylinder Securing System
• Luminous External Stitching
• Internal Storage Pockets
• Antimicrobial technology protected
• Fits D or CD Size Cylinders
• Encapsulated Membrane
to avoid Contamination
• 22mm Tapered Connections
• Bacterial Efficiency >99.9999%
• Single Patient Use
PRU010
(other styles & colours available)
PRU050
Complete System, with case
(1.5m hose length)
Complete System, with case
(3m hose length)
PRU050
Case only (Blue)
Filter Disks (Box 50)
PRU010
FACE MASKS
MOUTHPIECES
• 22mm Connection (both)
• Soft Inflatable Pad (s.p.u)
• Soft Seal Pad (silicone)
• Moulded Plastic
• 22mm Tapered Connection
• Single Patient Use
Single patient use, clear plastic
011-4
Adult Mask
011-2
Child Mask
332555
Re-usable, silicone, autoclavable
012-4
Adult Mask
012-2
Child Mask
Mouthpieces (Pkt 5)
332555
DEMAND UNIT WASTE GAS OUTLET
WALL MOUNTING BRACKET
• Moulded Plastic
• Swivel Action
• Replaces Exhaust Valve Cap
• Moulded Plastic
• C/w 2 x Self Tapping Screws
PRU0-20
PRU003/W
PRU003/WR
Outlet
Bracket & Screws
Bracket, Rail Mounted
SUPPORT CONSUMABLES PACK
Note:
PRU0-20
PRU003/W
OXYGEN DEMAND Systems
also available in similar formats.
(details on request)
Consisting of:
10 x Bacterial Filters
2 x Mouthpieces
1 x Adult Facemask
•
•
•
PRU010-SUP
8
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
Support Pack
www.oxylitre.co.uk
PIPELINE FLOWMETERS (Standard Type)
9
Brass Body
SINGLE FLOWMETER
TWIN FLOWMETER “Y” CONFIGURATION
• Brass Chrome Plated Body
• With BS Probe
• Tubing Nipple
• MRI Compatible
• Brass Chrome Plated Body
• With BS Probe
• Tubing Nipples
• MRI Compatible
F1601
F1601H
F1621
F1611
F1611H
F1602
F1602H
F1622
F1612
F1623
Oxygen, 0 to 15Lpm
O2, c/w Humidifier
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
MA-4, c/w Humidifier
F1601
Oxygen, 0 to 15Lpm
O2, c/w Humidifiers
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
Oxygen, 15Lpm + 4Lpm
F1602
SINGLE FLOWMETER
TWIN FLOWMETERS “Y” CONFIGURATION
• Brass Chrome Plated Body
• Without BS probe
• Tubing Nipple
• MRI Compatible
• Brass Chrome Plated Body
• Without BS probe
• Tubing Nipples
• MRI Compatible
F1600
F1620
F1600A
F1600C
F1600C-3L
F16000
Oxygen, 0 to 15Lpm
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
Co2, 0 to 12Lpm
Co2, 0 to 3Lpm
Oxygen, 0 to 15Lpm
F16000
F1600
SINGLE FLOWMETER RAIL MOUNTED
TWIN FLOWMETER (Back Bar type)
• Brass Chrome Plated Body
• Tubing Nipple
• Universal Rail Clamp
• 1.5m HP BS Coloured Hose & Probe
• Brass Chrome Plated Body
• With BS Probe
• Tubing Nipples
• MRI Compatible
F1630
F16304
F1630A
F1630/H
F1602B
F1612B
F1670
Oxygen, 0 to 15Lpm
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
Oxygen to, 0-15 Lpm
c/w Humidifier
F1630
Oxygen, 0 to 15Lpm
MA-4, 0 to 15Lpm
O2, S/S Valve + 15Lpm
F1602B
TWIN FLOWMETER RAIL MOUNTED
Discounted Prices Available
• Brass Chrome Plated Body
• Tubing Nipples
• Universal Rail Clamp
• 1.5m HP BS Coloured Hose & Probe
For mixed package of Pipeline
Flowmeters & Suction Controllers
Please contact our sales department for details:
Tel: 0161-872-6322 E-mail: [email protected]
Air Safety Guard
F1632
F16324
F1632A
Oxygen, 0 to 15Lpm
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
Accessories see page 11
For Air Flowmeters
see page 11
F1632
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
9
10
PIPELINE FLOWMETERS (Compact Type)
Moulded Body
SINGLE FLOWMETER
TWIN FLOWMETER “Y” CONFIGURATION
• Moulded Body Colour Coded
• With BS Probe
• Tubing Nipple
• MRI Compatible
• Moulded Body Colour Coded
• With BS Probe
• Tubing Nipples
• MRI Compatible
F2601
F2601H
F2621
F2611
F2611H
F2602
F2602H
F2622
F2612
Oxygen, 0 to 15Lpm
O2, c/w Humidifier
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
MA-4, c/w Humidifier
F2601
Oxygen, 0 to 15Lpm
O2, c/w Humidifiers
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
F2612
SINGLE FLOWMETER
TWIN FLOWMETERS “Y” CONFIGURATION
• Moulded Body Colour Coded
• Without BS probe
• Tubing Nipple
• MRI Compatible
• Moulded Body Colour Coded
• Without BS probe
• Tubing Nipples
• MRI Compatible
F2600
F2620
F2600A
F26000
Oxygen, 0 to 15Lpm
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
Oxygen, 0 to 15Lpm
F26000
F2600
SINGLE FLOWMETER RAIL MOUNTED
TWIN FLOWMETER (Back Bar type)
• Moulded Body Colour Coded
• Tubing Nipple
• Universal Rail Clamp
• 1.5m HP BS Coloured Hose & Probe
• Moulded Body Colour Coded
• With BS Probe
• Tubing Nipples
• MRI Compatible
F2630
F26304
F2630A
F2630/H
F2602B
F2612B
Oxygen, 0 to 15Lpm
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
Oxygen to, 0-15 Lpm
c/w Humidifier
F2630
Oxygen, 0 to 15Lpm
MA-4, 0 to 15Lpm
F2602B
TWIN FLOWMETER RAIL MOUNTED
Discounted Prices Available
• Moulded Body Colour Coded
• Tubing Nipples
• Universal Rail Clamp
• 1.5m HP BS Coloured Hose & Probe
For mixed package of Pipeline
Flowmeters & Suction Controllers
Please contact our sales department for details:
Tel: 0161-872-6322 E-mail: [email protected]
Air Safety Guard
F2632
F26324
F2632A
Oxygen, 0 to 15Lpm
Oxygen, 0 to 4Lpm
MA-4, 0 to 15Lpm
Accessories see page 11
For Air Flowmeters
see page 11
F2632
10
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
PIPELINE FLOWMETERS & ACCESSORIES
SELECT-a-FLOW FLOWMETER (0-15Lpm)
ACCESSORIES:
• BS Probe
• Tubing Nipple Outlet (11 flow settings)*
H110
SP554
SP45
SP46
SP46B
IS1174
IS1106
IS1140
FM0001
F1666
F1667
SP28
SP53
F1681
F1681A
Oxygen, 0 to 15Lpm
MA-4, 0 to 15Lpm
£77.00
F1681
11
Each
Humidifier (Bubble type) Autoclaveable (250ml)
Humidifier Adaptor 9/16 UNF
Tubing Nipple male 1/2 UNF
Tubing Nipple female 9/16 UNF (WHITE for O2)
Tubing Nipple female 9/16 UNF (BLACK for AIR)
Oxygen Connecting Tube (2m)
Facemask, O2 Adult
Facemask, O2 Paediatric
AirGuard, Air Flowmeter Safety Guard
Remote Rail Mount Assembly 1.5m
Remote ‘V’ Mount Assembly 1.5m
Push Button FLUSH Assembly
Flowmeter Extension Arm & Washer
SELECT-a-FLOW FLOWMETER (LOW)
• BS Probe
• Tubing Nipple Outlet (11 flow settings)*
F1683
F1680
F1684
Oxygen, 0 to 3Lpm
Oxygen, 0 to 1.1Lpm
Oxygen, 2-4-6Lpm
H110
SP554
SP45
SP46
SP46B
F1666
FM0001
IS1106
IS1174
F1683
Air Safety Guard
For Air Flowmeters
see ref: FM0001
*FLOW SETTING INFORMATION:
SERVICE KITS:
All SELECT-a-FLOW Flowmeters have a range of 11 settings that
vary depending on the Maximum Flow Rate.
SKF50
SKF6-AIR
SKF6-O2
SKF26-AIR
SKF26-O2
SKF8-15LPM
SKF8-1.1LPM
SKF8-3LPM
0 to 15Lpm:
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 6.0, 8.0, 10.0, 15.0
0 to 3Lpm:
0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 3.0
0 to 1.1Lpm:
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1
Service Exchange Units see page 26
Service Kit O2 F/m 15Lpm (Gauge type)
Service Kit (STD) AIR 15Lpm (Bobbin type)
Service Kit (STD) O2 4Lpm & 15Lpm (Bobbin type)
Service Kit (COMP) AIR 15Lpm (Bobbin type)
Service Kit (COMP) O2 4Lpm & 15Lpm (Bobbin type)
Service Kit O2 S-a-F Flowmeter. 15Lpm
Service Kit O2 S-a-F Flowmeter. 1.1Lpm
Service Kit O2 S-a-F Flowmeter. 3Lpm
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
11
PIPELINE SUCTION EQUIPMENT
12
“elite” PIPELINE SUCTION CONTROLLER:
Direct
“elite” PIPELINE SUCTION CONTROLLER:
Remote
• Robust Plastic Construction
• Integral Gauge, Dual Scale Dial:
• Robust Plastic Construction
• Integral Gauge, Dual Scale Dial:
kPa & mmHg
kPa & mmHg
• Positive Pressure Relief Valve
• ON/OFF Increase/Decrease Control
• Encapsulated Bacterial/Hydrophobic
• Positive Pressure Relief Valve
• ON/OFF Increase/Decrease Control
• Encapsulated Bacterial/Hydrophobic
Filter Unit
Filter Unit
• BS Probe (or 9/16 UNF male connection)
S713
S713916
S714
S714916
S715
S715916
Note:
S713
HIGH Suction 0 to -760mmHg
HIGH Suction (9/16 male)
LOW Suction 0 to -200mmHg
LOW Suction (9/16 male)
THORACIC Suction 0 to -50cmH2O
THORACIC Suction (9/16 male)
Thoracic Suction, use bacterial
filters only.
• Universal Rail Clamp c/w 1.5m BS
Hose & Probe
S713R HIGH Suction 0 to -760mmHg
S714R LOW Suction 0 to -200mmHg
S715R Thoracic Suction (0 to -50cmH2O)
S713R
“elite” TWIN PIPELINE SUCTION CONTROLLERS:
Direct
“elite” TWIN PIPELINE SUCTION CONTROLLERS:
Remote
• Robust Plastic Construction
• Integral Gauge, Dual Scale Dial:
• Robust Plastic Construction
• Integral Gauge, Dual Scale Dial:
kPa & mmHg
kPa & mmHg
• Positive Pressure Relief Valve
• ON/OFF Increase/Decrease Control
• Encapsulated Bacterial/Hydrophobic
• Positive Pressure Relief Valve
• ON/OFF Increase/Decrease Control
• Encapsulated Bacterial/Hydrophobic
Filter Unit
Filter Unit
• BS Direct Probe
• On “V” Configuration Back Bar
• Universal Rail Clamp c/w 1.5m
•
S713-HH HIGH/HIGH Suction
0 to -760mmHg
S713-HL HIGH/LOW Suction
S713-HT HIGH/THORACIC Suction
S713-HH
S713-HLR
BS Hose & Probe
On “V” Configuration Back Bar
S713-HHR
S713-HLR
S713HTR
HIGH/HIGH Suction
0 to -760mmHg
HIGH/LOW Suction
HIGH/THORACIC Suction
SUCTION JAR ASSEMBLY 2Ltr “V” MOUNT
SUCTION JAR ASSEMBLY 2Ltr RAIL MOUNT
• Manufactured from Apex Plastic
• Autoclaveable to 140°C
• Stainless Steel Cradle
• Overflow Float Protection
• Manufactured from Apex Plastic
• Autoclaveable to 140°C
• Stainless Steel Cradle
• Overflow Float Protection
S7500A
S7500B
“V” Mount Fitting
Wall Plate (see page 13 Accessories)
Rail Mount Fitting
Rail System (see page 23)
Note:
S7500B
S7500A
Calibration dials are colour coded for HIGH,
LOW and THORACIC suction units
Discounted Prices Available
VACUUM COMPARISON CHART: (0 to max ranges)
Suction
HIGH
LOW
THORACIC
For mixed package of Pipeline
Bar
mmHg
cmH20
-1.013
-0.266
-0.049
-760
-200
-37
-1033
-272
-50
Flowmeters & Suction Controllers
Please contact our sales department for details:
Tel: 0161-872-6322 E-mail: [email protected]
Accessories see page 13
12
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
PIPELINE SUCTION EQUIPMENT & ACCESSORIES
“elite” MOBILE P/L THEATRE
SUCTION TROLLEY
HYDROPHOBIC SUCTION FILTER DISKS
• High Suction Controller (0 to -760mmHg)
• ON/OFF Increase Decrease Control
• Bacterial/Hydrophobic Filter Capsule
• 5 Star Trolley Base & Vertical Handle
• 2 x 1800ml Suction Jar Assemblies
• Manual Changeover Valve
• 2m BS Hose Assembly & Probe
>99.9999%
Encapsulated Membrane
(to avoid contamination)
Screw On/Off Fitting
For Oxylitre “elite” ranges of suction
products (ranges: S7 Series & ESS Series)
it = internal thread only
tt = internal & external threads for
multi product fit
(can also be used as an in-line tubing filter)
S7200
S7200L
S7200A
S7200V
S7200S
S7200
13
• Bacterial/Hydrophobic Efficiency
•
•
•
S750
HIGH, 2 x Autoclaveable
Jar Assembly
LOW, 2 x Autoclaveable
Jar Assembly
HIGH, 2 x RECEPTAL
Jar Assembly
HIGH, 2 x VacSax Jar Assembly
HIGH, 2 x SERRES Jar Assembly
S750
S750T
S760
S760
Box 30 Capsules (it)
Box 30 Capsules (tt)
Box 30 Laser/Diathermy (it)
Note: Thoracic Suction, use bacterial
filters only.
(Available with most other makes of
disposable jar systems)
BACTERIAL SUCTION FILTERS
• Bacterial ONLY
• Tube Type: for old type suction
units (S6-- & ES-- Ranges)
S650
S6500
S740
S740
S650
Box 30 Tubes (60mm long)
Box 30 Tubes (47mm long)
Box 30 Encapsulated Disk (it)
Note: Thoracic Suction,
use bacterial filters only.
ACCESSORIES
VP26
S7525
S7520
S6100
S6666
Service Exchange Units see page 26
S6100
S7520
S7130
S6190
S7510B
S7510A
S7525
VP26
S6667
S6666
R1310
SK17
180FFM
VAC100
VAC101
VAC200
VAC201
S75251
S75252
S75252A
S75252F
2Ltr Standard Suction Jar & Handle
Suction Jar Lid & Float Assembly
Float Assembly only
Lid Sealing Ring only
Jar Cradle/Clips & Rail Fitting
Jar Cradle/Clips & ‘V’ Mount
Male Tapered Connector
BS Wall Plate c/w screws
‘V’ Mount & Hose Assembly (1.5m)
Universal Rail Clamp & Hose 1.5m
Universal Rail Mount & “V” Bracket
Service Kit for S71-- elite Suction Controller Range
Suction Connecting Tube 1.8m
Suction Tubing Clear A/S (roll 30m)
Suction Tubing Clear A/S (per 1m)
Suction Tubing Yellow (roll 30m)
Suction Tubing Yellow (per 1m)
Male Tapered Connector & Clear Tube 1m
Male Tapered Connector & Yellow Tube 1m
Male Tapered Connector & Yellow Tube 2m
Male Tapered Connector & Yellow Tube 0.5m & Hydrophobic Filter
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
13
PORTABLE SUCTION & ACCESSORIES
14
“petite elite” PORTABLE SUCTION PUMP
HIGH SUCTION
“petite elite” PORTABLE SUCTION PUMP
HIGH SUCTION
• Single x 1000ml Standard Jar Assembly,
• Single x 1000ml Disposable “SERRES”
•
•
•
•
•
•
•
•
•
•
•
•
PSP001
Autoclave able
Robust Moulded Case Construction
Encapsulated Bacterial/Hydrophobic
Filter Disk
Luminous Touch Control Panel
Maximum Vacuum Override Button
Battery Level/Charge Indicator
High Suction – High Flow
80 to 500mmHg. Flow Rate >25Lpm
115v – 240v AC
12v – 28v DC
Battery 12v DC, 4.3 mAh, Rechargeable
Duration >1hr 20m
4.59Kg
PSP001
PSP003
Standard 1000ml Jar Assembly
PSP003
• Single x 1000ml Disposable “RECEPTAL”
• Single x 1000ml Disposable “VACSAX”
•
•
•
•
•
•
•
•
•
•
Jar Assembly
Robust Moulded Case Construction
Encapsulated Bacterial/Hydrophobic
Filter Disks
Luminous Touch Control Panel
Maximum Vacuum Override Button
Battery Level/Charge Indicator
High Suction – High Flow
80 to 500mmHg. Flow Rate >25Lpm
115v – 240v AC
12v – 28v DC
Battery 12v DC, 4.3 mAh, Rechargeable
Duration >1hr 20m
4.59Kg
•
•
PSP004
Disposable 1000ml Jar Assembly
Bar
mmHg
cmH20
-1.013
-0.266
-0.049
-760
-200
-37
-1033
-272
-50
• Single x 1000ml Jar Assembly
(various types)
• Robust Moulded Case Construction
• Encapsulated Bacterial/Hydrophobic
•
•
•
•
•
•
•
•
•
•
Filter Disks
Luminous Touch Control Panel
Maximum Vacuum Override Button
Battery Level/Charge Indicator
Low Suction – High Flow
10 to 150mmHg. Flow Rate >25Lpm
115v – 240v AC
12v – 28v DC
Battery 12v DC, 4.3 mAh, Rechargeable
Duration >1hr 20m
4.59Kg
PSP001L
PSP002L
PSP003L
PSP004L
14
Service Exchange Units see page 26
Disposable 1000ml Jar Assembly
“petite elite” PORTABLE SUCTION PUMP
LOW SUCTION
PSP001L
Accessories see page 15
•
•
•
•
•
•
•
•
•
•
Jar Assembly
Robust Moulded Case Construction
Encapsulated Bacterial/Hydrophobic
Filter Disks
Luminous Touch Control Panel
Maximum Vacuum Override Button
Battery Level/Charge Indicator
High Suction – High Flow
80 to 500mmHg. Flow Rate >25Lpm
115v – 240v AC
12v – 28v DC
Battery 12v DC, 4.3 mAh, Rechargeable
Duration >1hr 20m
4.59Kg
PSP004
VACUUM COMPARISON CHART: (0 to max ranges)
HIGH
LOW
THORACIC
Disposable 1000ml Jar Assembly
“petite elite” PORTABLE SUCTION PUMP
HIGH SUCTION
PSP002
Suction
•
•
•
•
•
•
•
•
•
•
“petite elite” PORTABLE SUCTION PUMP
HIGH SUCTION
•
•
PSP002
•
•
Jar Assembly
Robust Moulded Case Construction
Encapsulated Bacterial/Hydrophobic
Filter Disks
Luminous Touch Control Panel
Maximum Vacuum Override Button
Battery Level/Charge Indicator
High Suction – High Flow
80 to 500mmHg. Flow Rate >25Lpm
115v – 240v AC
12v – 28v DC
Battery 12v DC, 4.3 mAh, Rechargeable
Duration >1hr 20m
4.59Kg
Disposable 1000ml STD Jar
Disposable 1000ml RECEPTICAL Jar
Disposable 1000ml SERRES Jar
Disposable 1000ml VacSax Jar
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
PORTABLE SUCTION & ACCESSORIES
15
PORTABLE SUCTION PUMP DOCKING STATION
• Lightweight (1.5Kg)
• Quick And Easy To Use
• Automatic Charging When Connected To A Power Supply
• Meets All Relevant Standards
• Tested Beyond The Requirements For Vehicle Transit (20g)
• Overall Size – 310 x 305 x 70mm
PSP701A
PSP701B
PSP701C
PSP701D
PSP701M
PSP100-10-K
Docking Station, 12v DC Lead C/W Car/Vehicle Plug, 1.5m Lead
Docking Station, 24-28v DC Lead C/W Car/Vehicle Plug, 1.5m Lead
Docking Station, 230v AC Lead C/W UK 3 Pin Plug, 1.5m Lead
Docking Station, 230v AC Lead C/W EU 2 Pin Plug, 1.5m Lead
Docking Station Mounting Bush Kit (3 hole)
Docking Station Protector Bar Kit
Note:
PSP701B
The Docking Station has been designed to be connected to an appropriate power supply to allow
the Suction Pump to be stored safely and on a constant charge to ensure the Pump is always in
the same place and is fully charged ready for use at all times
ACCESSORIES (each)
PSP500
PSP600-50
PSP100-1-2
PSP500-5-1
Service Exchange Units see page 26
PSP500
PSP500-1
PSP500-2
PSP500-3
BS9335
PSP100-1-2
ABB41-S
ABB42-S
PSP500-4
PSP500-4-1
PSP500-5-1
PSP600-12
PSP600-50
PSP050
PSP400-1
PSP400-2
SKPSP1
SKPSP5
1000ml Standard Jar Assembly Complete
1000ml Standard Jar only
Standard Jar Lid c/w Float Assembly
Standard Float Assembly only
Standard Lid Sealing Ring
Angled Tubing Tail only
1000ml RECEPTAL Jar only
1000ml RECEPTAL liner only (disposable)
Std Patient Tubing (silicone 25m roll)
Std Patient Tubing (silicone 1m)
Suction Catheter Connector
Filter Disks (per box 12)
Filter Disks (per box 50)
Carry Case
Power Lead (UK 3 pin) 110v-230v AC
Power Lead 12v DC
Service Kit, PPM Inspection Service
Service Kit, PPM Major Service
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
15
16
MOBILE ELECTRICAL SUCTION & ACCESSORIES
“elite” ELECTRICAL HIGH SUCTION PUMP
“elite” ELECTRICAL HIGH SUCTION PUMP
• Single x 2000ml Jar Assembly, Autoclaveable
• Robust Moulded Construction
• 2 x 12cm Diameter Integral Wheels for
• Twin x 2000ml Jar Assembly, Autoclaveable
• Robust Moulded Construction
• 2 x 12cm Diameter Integral Wheels for
Mobility, as std
Mobility, as std
• Integral Gauge, Dual Scale Dial:
•
•
•
ESS100
•
•
•
kPa + mmHg
Increase/Decrease Control
Illuminated ON/OFF Switch
Encapsulated Bacterial/Hydrophobic
Filter Disk
High Suction – High Flow
Vacuum 0 to 760mmHg. Flow Rate >25Lpm
240v AC, 50/60Hz
ESS100
ESS100A
ESS100V
ESS100S
• Integral Gauge, Dual Scale Dial:
•
•
•
ESS200
1 x Standard 2Ltr Jar Assembly
1 x RECEPTAL 2Ltr Jar Assembly
1 x VacSax 2Ltr Jar Assembly
1 x Serres 2Ltr Jar Assembly
ESS200
ESS200A
ESS200V
ESS200S
“elite” ELECTRICAL LOW SUCTION PUMP
•
•
•
•
ESS050
•
•
•
ESS050
ESS050A
ESS050V
ESS050S
1 x Standard 2Ltr Jar Assembly
1 x RECEPTAL 2Ltr Jar Assembly
1 x VacSax 2Ltr Jar Assembly
1 x Serres 2Ltr Jar Assembly
ACCESSORIES:
S6100
S750
S6100
S7520
S7130
S6190
S750
S760
180FFM
VAC100
VAC101
VAC200
VAC201
S7525
S75251
S75252
S75252A
S75252F
S7525A
2000ml Standard Suction Jar & Handle
Suction Jar Lid Assembly & Float
Float Assembly only
Lid Sealing Ring only
Filter Capsules (per Box 30)
Filter Cap, Laser/Diathermy (Box 30)
Suction Connecting Tube 1.8m
Suction Tubing Clear A/S (roll 30m)
Suction Tubing Clear A/S (per 1m)
Suction Tubing Yellow (roll 30m)
Suction Tubing Yellow (per 1m)
Male Tapered Connector
Male Tapered Connector & CLEAR A/S Tubing 1m
Male Tapered Connector & YELLOW Tubing 1m
Male Tapered Connector & YELLOW Tubing 2m
Male Tapered Connector 0.5m YELLOW Hose & Hydr Filter
Male Tapered Connector & Tube (30cm) for ESS units only
2 x Standard 2Ltr Jar Assemblies
2 x RECEPTAL 2Ltr Jar Assemblies
2 x VacSax 2Ltr Jar Assemblies
2 x Serres 2Ltr Jar Assemblies
“elite” ELECTRICAL THEATRE SUCTION
PUMP
• Single x 2000ml Jar Assembly, Autoclaveable
• Robust Moulded Construction
• 2 x 12cm Diameter Integral Wheels for
Mobility, as std
Integral Gauge, Dual Scale Dial:
kPa + mmHg
Increase/Decrease Control
Illuminated ON/OFF Switch
Encapsulated Bacterial/Hydrophobic
Filter Disk
Low Suction – High Flow
Vacuum 0 to 150mmHg. Flow Rate >25Lpm
240v AC, 50/60Hz
•
•
•
kPa + mmHg
Increase/Decrease Control
Illuminated ON/OFF Switch
Encapsulated Bacterial/Hydrophobic
Filter Disk
High Suction – High Flow
Vacuum 0 to 760mmHg. Flow rate >25Lpm
240v AC, 50/60Hz
• Twin x 2000ml Jar Assembly, Autoclaveable
• Robust Moulded Construction
• 2 x 12cm Diameter Integral Wheels for
•
•
•
•
ESS5200
•
•
•
Mobility, as std
Integral Gauge, Dual Scale Dial:
kPa + mmHg
Increase/Decrease Control
Illuminated ON/OFF Switch
Encapsulated Bacterial/Hydrophobic
Filter Disk
High Suction – High Flow
Vacuum 0 to 760mmHg. Flow rate >45Lpm
240v AC, 50/60Hz
ESS5200
ESS5200A
ESS5200V
ESS5200S
2 x Standard 2Ltr Jar Assemblies
2 x RECEPTAL 2Ltr Jar Assemblies
2 x VacSax 2Ltr Jar Assemblies
2 x Serres 2Ltr Jar Assemblies
VACUUM COMPARISON CHART:
(0 to max ranges)
Suction
HIGH
LOW
THORACIC
Bar
mmHg
cmH20
-1.013
-0.266
-0.049
-760
-200
-37
-1033
-272
-50
Note:
Calibration dials are colour coded for
HIGH and LOW suction units
Available with most other makes of
disposable jar systems.
Please specify when ordering.
For a FULL range of filters see page: 13
16
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
INJECTOR SUCTION & ACCESSORIES
17
INJECTOR SUCTION SYSTEM Complete
INJECTOR SUCTION SYSTEMS Basic
• Injector Suction Controller 0 to >500mmHg
• Flowmeter 0-15Lpm
• Back Bar Mounting Assembly
• Rail Clamp & 1m BS Hose & Probe
• 1000ml Suction Jar Assembly Rail Mounted
• BN Regulator c/w BS S/S Valve
• Injector Suction Controller
S803
•
•
•
0 to >500mmHg
Flowmeter 0-15Lpm
Back Bar Mounting Assembly
Rail Clamp & 1m BS Hose & Probe
S801
Complete System
S801-1
Injector & F/M System
& Hose Assembly
Injector & F/M System
without Hose
S801
S803
INJECTOR SUCTION CONTROLLER only
INJECTOR SUCTION SYSTEM option
• Injector Suction Controller only
• 0 to >500mmHg
• Injector Suction Controller
• Flowmeter 0-15Lpm
• Rail Clamp & 1m Hose Assembly
S800/3
S800/2L
S800/3R
Direct Mount 3/8bsp nut
Direct Mount 3/8bsp nut LOW
Direct Sidemount 3/8bsp l/h
S801-SAF Injector, SAF F/M & Hose Assy
S801-SAF
S800/3
REGULATOR & Select-A-Flow FLOWMETER
REGULATOR ONLY OPTIONS
• Bull Nose & Pin Index Cylinder Fitting
• Pre Set 4Bar
• HP Gauge (Luminous Dial)
• S-A-F Flowmeter (11 settings)
• Tubing Outlet
• 3/8bsp male side connection
• Standard Regulator, Brass Chrome Plated
• Compact Regulator, Stainless Steel Body
• All Pre-Set 4Bar output
• Various Outlet Connections Available
R1403-10
R14035-10
Compact Reg & SAF BN
Compact Reg & SAF PI
R1403-10
R1601
R16015
Std Reg & S/S Valve BN
Std Reg & S/S Valve PI
R1401
R14015
Comp Reg & S/S Valve BN
Comp Reg & S/S Valve PI
R1410
R14105
Comp Reg & 3/8Bsp BN
Comp Reg & 3/8Bsp PI
R1401
1Ltr SUCTION JAR ASSEMBLY only
ACCESSORIES
• 1000ml Suction Jar Autoclaveable to 121°C
• Screw on Lid c/w tube connections,
F1666
Autoclaveable
• Overflow Float Assembly, Autoclaveable
• Stainless Steel Cradle & Jar Retaining Clip
S8701
S8702
Rail Mounted Assembly
“V” Mounted Assembly
S8702
Service Exchange Units see page 26
F1666
Remote Rail Mounting Assembly
(1.5m hose)
F1667
Remote “V” Mounting Assembly
(1.5m hose)
IV008
Injector Silencer Wadding
(2 per unit)
PSP500-1 1000ml Suction Jar only
PSP500-2 1000ml Jar Lid & Float
Assembly
BS9335
1000ml Lid Sealing Ring
PSP500-3 Float Assembly only
PSP100-1-2 Angled Tubing Tail only
S8701A
Cradle & Rail Mount Assembly
S8701B
Cradle & “V” Mount Assembly
VAC100
Suction Tubing Clear A/S
(roll 30m)
VAC101
Suction Tubing Clear A/S
(per 1m)
VAC200
Suction Tubing Yellow A/S
(roll 30m)
VAC201
Suction Tubing Yellow A/S
(per 1m)
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
17
PIPELINE ACCESSORIES (British Standard)
18
HOSE ASSEMBLY: PROBE to NIST
HOSE ASSEMBLY: NIST to NIST
• BS Probe
• BS NIST Nut & Tail
• 3m BS Coloured Hose
• MRI Compatible
• (other lengths & variations available)
• BS NIST Couplings
• 3m BS Coloured Hose
• MRI Compatible
• (other lengths & variations available)
AH010
AH011
AH012
AH013
AH014
AH001
AH002
AH003
AH004
AH005
AH006
Oxygen
Nitrous Oxide
MA-7
MA-4
Vacuum
AH010
AH001
HOSE ASSEMBLY:
NIST to SELF SEALING VALVE
HOSE ASSEMBLY: PROBE to PROBE
• BS Probes
• 3m BS Coloured Hose
• MRI Compatible
• (other lengths & variations available)
• BS NIST Coupling
• BS Indexed Self Sealing valve
• 3m BS Coloured Hose
• NOT MRI Compatible
• (other lengths & variations available)
AH201
Oxygen
Nitrous Oxide
Entonox
MA-4
MA-7
Vacuum
AH201
AH202
AH203
AH204
AH205
AH206
AH301
AH302
AH303
AH305
AH306
Oxygen
Nitrous Oxide
Entonox
MA-4
MA-7
Vacuum
Oxygen
Nitrous Oxide
Entonox
MA-7
MA-4
AH301
EXTENSION HOSE:
PROBE to SELF SEALING VALVE
• BS Probe
• BS Indexed Self Sealing Valve
• 3m BS Coloured Hose
• NOT MRI Compatible
• (other lengths & variations available)
AH101-3
AH101-3
AH102-3
AH103-3
AH104-3
AH105-3
AH106-3
Oxygen
Nitrous Oxide
MA-7
MA-4
Vacuum
Entonox
AHB01
BACK-UP HOSE SYSTEMS (For use during shutdown of piped gas system)
• BS NIST Coupling
• BS Probes
• 1m Hose Assemblies
AHB01
AHB02
AHB03
AHB04
AHB05
AHB01P
AHB02P
AHB03P
AHB04P
AHB05P
18
Service Exchange Units see page 26
• None Return Valves
• Change Over Valves
• NOT MRI Compatible
Oxygen
Nitrous Oxide
Entonox
MA-4
MA-7
Oxygen
Nitrous Oxide
Entonox
MA-4
MA-7
(NIST to probes)
(NIST to probes)
(NIST to probes)
(NIST to probes)
(NIST to probes)
(probe to probes)
(probe to probes)
(probe to probes)
(probe to probes)
(probe to probes)
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
PIPELINE ACCESSORIES (British Standard)
T1000
19
TWIN ADAPTORS
TWIN ADAPTORS RAIL MOUNTED
• Brass Chrome Plated Body
• BS Indexed Self Sealing Valves
• BS Probe
• NOT MRI Compatible
• Brass Chrome Plated Body
• BS Indexed Self Sealing Valves
• Universal Rail Clamp,
T1000
T1001
T1002
T1003
T1004
T1005
T1000W
T1001W
T1002W
T1003W
T1004W
T1005W
Oxygen (42mm wide)
Nitrous Oxide (42mm wide)
MA-7 (42mm wide)
MA-4 (42mm wide)
Vacuum (42mm wide)
Entonox (42mm wide)
Oxygen (94mm wide)
Nitrous Oxide (94mm wide)
MA-7 (94mm wide)
MA-4 (94mm wide)
Vacuum (94mm wide)
Entonox (94mm wide)
c/w 1.5m BS Hose & Probe
• NOT MRI Compatible
T1000R
T1001R
T1002R
T1003R
T1004R
T1005R
Oxygen
Nitrous Oxide
MA-7
MA-4
Vacuum
Entonox
(42mm wide)
(42mm wide)
(42mm wide)
(42mm wide)
(42mm wide)
(42mm wide)
T1000R
TWIN “Y” ADAPTORS
SINGLE ADAPTOR & HOSE ASSEMBLY
• Brass Chrome Plated Body
• BS Indexed Self Sealing Valves
• BS Probe
• NOT MRI Compatible
• Brass Chrome Plated Body
• BS Indexed Self Sealing Valves
• BS Probe
• 1.5m Hose Assembly
• NOT MRI Compatible
T1000Y
T1001Y
T1002Y
T1003Y
T1004Y
T1005Y
Oxygen
Nitrous Oxide
MA-7
MA-4
Vacuum
Entonox
(95mm wide)
(95mm wide)
(95mm wide)
(95mm wide)
(95mm wide)
(95mm wide)
T1000Y
T100R
T101R
T102R
T103R
T104R
T105R
Oxygen
Nitrous Oxide
MA-7
MA-4
Vacuum
Entonox
T1000R
TWIN ADAPTOR & HOSE ASSEMBLY
• Brass Chrome Plated Body
• BS Indexed Self Sealing Valves
• BS Probe
• 4m Hose Assembly
• NOT MRI Compatible
T1500
T1501
T1502
T1503
T1504
T1505
Oxygen
Nitrous Oxide
MA-7
MA-4
Vacuum
Entonox
ALL widths measured from the
centre of each S/S valve
(94mm wide)
(94mm wide)
(94mm wide)
(94mm wide)
(94mm wide)
(94mm wide)
T1500
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
19
PIPELINE ACCESSORIES (British Standard)
20
B.S. REMOTE PROBES (cranked tube)
B.S. REMOTE PROBES (straight tube)
• Stainless Steel
• One Piece Machined
• BS Gas Indexed
• MRI Compatible
• 6.5mm o/d tube tail
• Stainless Steel
• One Piece Machined
• BS Gas Indexed
• MRI Compatible
• 6.5mm o/d tube tail
0032
0042
0052
0063
0064
00720
0032-S
0033-A
0042-S
0052-S
0063-S
0064-S
00720-S
0020-S
003M
Oxygen
Nitrous Oxide
Vacuum
MA-7
MA-4
Entonox
0032
0034
0032-S
B.S. DIRECT PROBES 3/8Bsp male
SELF SEALING VALVES 1/4Bsp male
• Stainless Steel
• One Piece Machined
• BS Gas Indexed
• MRI Compatible
• BS Gas Indexed
• Stamped with Gas Service
• Colour Coded for Gas Service
• NOT MRI Compatible
0033
0034
0044
0053
0054
0066
0067
0072
0085
0086
0087
0088
0089
0090
0091
Oxygen (angled 90°)
Oxygen
Nitrous Oxide
Vacuum (angled 90°)
Vacuum (9/16unf L/H Nut)
MA-7
MA-4
Entonox
Oxygen
Nitrous Oxide
Vacuum
MA-4
MA-7
Entonox
Heliox
0085
SELF SEALING VALVES 1/4Bsp female
SELF SEALING VALVES 1/8Bsp male
• BS Gas Indexed
• Stamped with Gas Service
• Colour Coded for Gas Service
• NOT MRI Compatible
• BS Gas Indexed
• Stamped with Gas Service
• Colour Coded for Gas Service
• NOT MRI Compatible
0085F
0086F
0087F
0088F
0089F
0090F
0085A
0086A
0087A
0088A
0089A
0090A
Oxygen
Nitrous Oxide
Vacuum
MA-4
MA-7
Entonox
0085F
20
Oxygen
Oxygen (angled 90° )
Nitrous Oxide
Vacuum
MA-7
MA-4
Entonox
Heliox
MA-7, 3m Type
Service Exchange Units see page 26
Oxygen
Nitrous Oxide
Vacuum
MA-4
MA-7
Entonox
0085A
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
PIPELINE ACCESSORIES (British Standard)
21
N.I.S.T. COUPLINGS (Nut & Liner)
B.S. COLOURED HP HOSE
• Stainless Steel
• B.S. Indexed
• MRI Compatible
• 6.5mm o/d tube tail
HOSE1
HOSE2
HOSE3
HOSE4
HOSE6
NI0020
NI0021
NI0022
NI0023
NI0024
NI0025
OX008
Oxygen
Nitrous Oxide
Entonox
MA-4
MA-7
Vacuum
NIST O ring
White = Oxygen
Blue = Nitrous Oxide
Black = Med Air
Yellow = Vacuum
Blue/White = Entonox
Standard roll 30m or per 1m
• Dimension Information
o/d: 12.7mm
i/d: 6.25mm
NI0020
FERRULES FOR B.S. HOSE (each)
SHRINK SLEEVE (each)
• Stainless Steel
HOSE5/0
HOSE5/1
HOSE5/2
HOSE5/3
HOSE5/4
FE100
FE400
14mm i/d
9mm i/d
FE100
CLEAR (50mm long)
WHITE (35mm long)
BLUE (35mm long)
BLACK (35mm long)
YELLOW (35mm long)
TUBING TAILS & NUTS
PIPELINE REDUCING REGULATOR
SP70
SP70A
SP75
SB30
• BS Probe
• Pre-Set Mini Regulator (adjustable option)
• BS Indexed Self Sealing Valves
Nut 3/8Bsp (Right Hand)
Tubing Outlet for 3/8Bsp Nut
Nut and Tubing Tail 1/4
3/8Bsp Nut (Left Hand)
SP75
Service Exchange Units see page 26
PR100
PR100N
MA-7 to MA-4
MA-7 to MA-4, NIST/NIST
PR100
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
21
CYLINDER ACCESSORIES (UK SIZES)
22
CYLINDER TROLLEYS
CYLINDER CRADLES
• Tubular Steel Construction
• Hammerite Finish
• Restraining Bars
• Two Wheels (various dia)
• Hook On Fitting (others available)
• Steel Construction
• Hammerite Finish
• (specials available on request)
M08E
M08F
M08G
M08J
M207A
M207B
E - Size
F – Size
G - Size
J - Size
M08E
E – Size
D – Size
M207A
CYLINDER STANDS
CYLINDER CRADLES
• Steel Construction
• Hammerite Finish
• Multi-Size Fitting
• Steel Construction
• White PVC Coated
M207
M2071
M2081
M2082
M2083
M2085
M2086
M2087
F Size
E Size
M207
M202
D-Size, WALL mounted
D-Size, HOOK mounted
D-Size, RAIL mounted
E-Size, WALL mounted
E-Size, HOOK mounted
E-Size, RAIL mounted
M2082
CYLINDER KEYS
CYLINDER RETAINING RINGS
M202
M202-C
M221
M223
M223-M
M223-C
M225
• Steel Construction
• Nickel Plated
Spindle Key (BN)
Spindle Key & Cord
Pin-Index “T” Key
Pin-Index Flat Key (economy)
Key, Pin-Index Flat Key (metal)
Pin-Index Flat Key & Cord
Pin-Index Ratchet Key
378
377
378
379
380
381
Wall Mounting Plate only
E – Size Ring
F – Size Ring
G – Size Ring
J – Size Ring
M221
M223
377
M223-M
Cylinder Diameter Comparisons
M225
22
see page 24
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
RAIL SYSTEM & FITTINGS
23
RAIL SYSTEMS
• Extruded Aluminium
• Anodised Silver Finish
• Fixes Direct to Wall
• Complete with End Caps & Infill
R0500
R1000
R1000-5
R2000
R2500
R3000
R1000 (Profile)
Rail 500mm, c/w end cap & infill strip
Rail 1000mm, c/w end cap & infill strip
Rail 1500mm, c/w end cap & infill strip
Rail 200mm, c/w end cap & infill strip
Rail 2500mm, c/w end cap & infill strip
Rail 3000mm, c/w end cap & infill strip
• Note: Mounting holes to be drilled on installation
R1000
Replacement Parts:
ADDITIONAL ITEMS:
R1000A
R1000B
R1302/1
R13-100
End Cap only
Rail Infill Strip only
Thumb Screw for clamp
R1000A
Rail Mounted AC 4-way,
13amp Socket Outlets, 2m Cable
R13-100
RAIL FITTINGS
• Extruded Aluminium
• One Piece Machined
• Anodised Silver Finish
• Locking Screw
R1301
R1302
Universal Rail Clamp only 22mm
Universal Rail Clamp only 44mm
R1310
R1310A
Universal Rail Clamp & “V” Bracket
Universal Rail Clamp & RECEPTAL Bracket
R1302
R1310
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
23
UK MEDICAL CYLINDER DATA
24
Cylinder Codes
Contents (litres)
Outlet Pressure
Valve Connection
OXYGEN
CD
D
E
F
HX
G
J
460
4 (Bar)
Schrader +
6mm tube
340
137 (Bar)
Pin-Index
680
137 (Bar)
Pin-Index
1360
137 (Bar)
Bullnose
5/8" Bsp
2300
4 (Bar)
Schrader +
6mm Tube
3400
137
Bullnose
5/8" Bsp
6800
137
Pin-Index
S/Spindle
900
44 (Bar)
Pin-Index
1800
44 (bar)
Pin-Index
3600
44 (Bar)
Handwheel
11/16 x 20
9000
44 (Bar)
Handwheel
11/16 x 20
18000
44 (Bar)
Handwheel
11/16 x 20
NITROUS
OXIDE
Contents (litres)
Outlet Pressure
Valve Connection
ENTONOX
50% N2O/
50% O2
Contents (litres)
Outlet Pressure
Valve Connection
MEDICAL
AIR
Contents (litres)
Outlet Pressure
Valve Connection
640
137 (Bar)
Pin-Index
CARBON
DIOXIDE
Contents (litres)
Outlet Pressure
Valve Connection
1800
50 (Bar)
Pin-Index
Contents (litres)
Outlet Pressure
Valve Connection
HELIUM
Oxygen
440
4 (Bar)
Schrader
Nitrous
Oxide
Entonox
Air
Pin-Index
Side Spindle Valve
500
137 (Bar)
Pin-Index
2000
137 (Bar)
Pin-Index
S/Spindle
300
137 (Bar)
Pin-Index
2200
4 (Bar)
Schrader
1280
137 (Bar)
Bullnose
5/8" Bsp
5000
137
Pin-Index
3200
137 (Bar)
Bullnose
5/8" Bsp
6400
137 (Bar)
Pin-Index
S/Spindle
1200
137 (Bar)
Bullnose
5/8" Bsp
Carbon
Dioxide
Front
Back
Integral Valve
Handwheel
Valve
Bullnose
Valve
Pin-Index
Valve
UK Cylinder Comparison Chart
For Trolleys, Cradles & Rings etc:
Size
Also takes these sizes (height will vary)
D
E
F
AD, CD, PD, ZD.
D, AD, CD, PD, RD, ZD.
LF, VF, HX, ZX.
24
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
SPHYGMOMANOMETERS (Accoson Type)
Greenlight 300 ELECTRONIC
SPHYGMOMANOMETER
25
6” ANEROID SPHYGMOMANOMETER
• Robust Construction
• Desk, Wall or Stand Mountable
• Manual operation
• Robust Construction
• Desk, Wall or Stand Mountable
• Manual Operation
• Auto calibration to Zero when switched on
• Large visual dial face
A332 Desk Mounted c/w Adult Velcro Cuff
A342 Wall Mounted c/w Adult Velcro Cuff
A362 Stand Mounted c/w Adult Velcro Cuff
A0702 Desk Mounted c/w Adult Velcro Cuff
AC1772 Wall Mounting Kit only
AC1774 Stand Mounting Kit only
A0702
A332
DUPLEX 2” Dia HAND MODEL
SPHYGMOMANOMETER
POCKET 2” Dia MODEL
SPHYGMOMANOMETER
• Lightweight die cast case
• One hand use, with fingertip control
• Metal construction
• Fitted with spring clip
•
of air release
C/w: Soft pouch case with zipper
A322
•
C/w: Velcro Cuff Assembly
A322
for attachment to cuff
C/w: Soft pouch case with zipper
A312
C/w: Velcro Cuff Assembly
A312
Accessories (each)
AC087
Inflation bulb only
AC086
Control valve only
AC102
Male tubing connector (plastic)
AC103
Female tubing connector (plastic)
AC104
Spring coil tubing 14”
AC105
Spring coil tubing 7”
AC006
Std Adult Velcro cuff complete t/t (9” x 5” )
AC002
Std Adult Bandage cuff complete t/t (9” x5” )
AC051
Std Adult Velcro cuff complete s/t (9” x5”)
AC047
Std Adult Bandage cuff complete s/t (9”x 5”)
AC005
Std Adult Velcro cuff ONLY
AC001
Std Adult Bandage cuff ONLY
AC007
Inflation bag only (9” x 5” twin tube)
AC052
Inflation bag only (9” x 5” single tube)
(other parts available details on request)
Service Exchange Units see page 26
In-House or On-Site Service & Repair see page 1
www.oxylitre.co.uk
25
Service Exchange Products (Trade Old for NEW)
26
SERVICE EXCHANGE STANDARD REGULATORS
SERVICE EXCHANGE COMPACT REGULATORS
• NEW for OLD Trade in Arrangement
• Units supplied in exchange are NEW Oxylitre
• NEW for OLD Traded In Arrangement
• Units supplied in exchange are NEW
products with a 7 year warranty
Oxylitre products with a 7 year warranty
• Brass Chrome Plated Body
• Stainless Steel Body Compact Regulators
Standard Regulators
XR600
XR6005
XR600A
XR600
XR500
XR5005
XR500A
XR5005A
XR610
XR6105
XR610A
XR601
XR6015
XR611
XR6115
XR621
XR605
XR1700
S/Ex O2 Regulator & Flowmeter
0-15Lpm BN
S/Ex O2 Regulator & Flowmeter
0-15Lpm PI
S/Ex AIR Regulator & Flowmeter
0-15Lpm BN
S/Ex O2 Regulator Twin Gauge
0-15Lpm BN
S/Ex O2 Regulator Twin Gauge
0-15Lpm PI
S/Ex AIR Regulator Twin Gauge
0-15Lpm BN
S/Ex AIR Regulator Twin Gauge
0-15Lpm PI
S/Ex O2 Regulator 3/8Bsp
male Outlet BN
S/Ex O2 Regulator 3/8Bsp
male Outlet PI
S/Ex MA-4 Regulator 3/8Bsp
male Outlet BN
S/Ex O2 Regulator & S/S Valve BN
S/Ex O2 Regulator & S/S Valve PI
S/Ex MA-7 Regulator & S/S Valve BN
S/Ex MA-7 Regulator & S/S Valve PI
S/Ex MA-4 Regulator & S/S Valve BN
S/Ex Regulator pre-set 4Bar
1/8Bsp x 11/16
S/Ex MA-7 Regulator HP
& S/S Valve BN
XR400
S/Ex O2 Regulator & Flowmeter
0-15Lpm BN
XR4005 S/ex O2 Regulator & Flowmeter
0-15lpm PI
XR401 S/Ex O2 Regulator & S/S Valve BN
XR4015 S/Ex O2 Regulator & S/S Valve PI
XR4015/E S/Ex Entonox Regulator & S/S Valve PI
XR410 S/Ex O2 Regulator 3/8Bsp male
Outlet BN
XR4105 S/Ex O2 Regulator 3/8Bsp male
Outlet PI
XR410A S/Ex MA-4 Regulator 3/8Bsp male
Outlet BN
XR421 S/Ex MA-4 Regulator & S/S Valve BN
XR4215 S/Ex MA-4 Regulator & S/S Valve PI
XR403 S/Ex O2 Select-a-Flow Reg
0-15Lpm BN
XR4035 S/Ex O2 Select-a-Flow Reg
0-15Lpm PI
XR403/L S/Ex O2 Select-a-Flow Reg
0-1.1Lpm BN
XR403/L5 S/Ex O2 Select-a-Flow Reg
0-1.1Lpm PI
XR405 S/Ex O2 Select-a-Flow Reg
& S/S Valve BN
XR4055 S/Ex O2 Select-a-Flow Reg
& S/S Valve PI
XR400
SERVICE EXCHANGE FLOWMETERS
SERVICE EXCHANGE PIPELINE SUCTION
• NEW for OLD Trade in Arrangement
• Units supplied in exchange are NEW
• NEW for OLD Trade in Arrangement
• Units supplied in exchange are NEW
• Brass Chrome Plated Flowmeter Body
Oxylitre products with a 7 year warranty
Oxylitre products with a 7 year warranty
XS713
XS713916
XR713R
XS714
XS713
XS714916
XS715
XS715916
XS714R
S/Ex Direct HIGH Suction
Controller & Probe
S/Ex Direct HIGH Suction
Controller 9/16unf
S/Ex HIGH Suction
Controller Remote
S/Ex Direct LOW Suction
Controller & Probe
S/Ex Direct LOW Suction
Controller 9/16unf
S/Ex Direct THORACIC
Suction Cont & Probe
S/Ex Direct THORACIC
Suction Cont 9/16unf
S/Ex LOW Suction
Controller Remote
SERVICE EXCHANGE PORTABLE SUCTION
XPSP1
XPSP2
XPSP3
XPSP4
XPSP1
UK only
S/EX Portable Suction STANDARD Jar
S/EX Portable Suction RECEPTAL Jar
S/EX Portable Suction SERRES Jar
S/EX Portable Suction VACSAX Jar
XF600
XR630
O2 Single Flowmeter
0-15Lpm without probe
XF601 O2 Single Flowmeter
0-15Lpm with probe
XF611 AIR Single Flowmeter
0-15Lpm with probe
XF621 O2 Single Flowmeter
0-4Lpm with probe
XF630 O2 Single Flowmeter
0-15Lpm Rail Mounted
XF6000 O2 Twin Flowmeter
0-15Lpm without probe
XF602 O2 Twin Flowmeter
0-15Lpm with probe
XF602B O2 Twin Flowmeter
0-15Lpm B/Bar & probe
XF622 O2 Twin Flowmeter
0-4Lpm with probe
XF632 O2 Twin Flowmeter
0-15Lpm Rail Mounted
XF632A AIR Twin Flowmeter
0-15Lpm Rail Mounted
XF681 O2 Select-a-Flow Flowmeter
0-15Lpm & probe
XF683 O2 Select-a-Flow Flowmeter
0-3Lpm & probe
XF680 O2 Select-a-Flow Flowmeter
0-1.1Lpm & probe
Service Exchange & Equipment Hire Service ( UK only)
SERVICE EXCHANGE INJECTOR SUCTION UNITS
• NEW for OLD Trade in Arrangement
• Units supplied in exchange are NEW Oxylitre
products with a 7 year warranty
XS800/3
XS801
XS801-1
S/Ex I/Suction Controller
only Direct 3/8bsp
S/Ex I/Suction & F/M,
Back Bar & Hose Assembly
S/Ex I/Suction & F/M & Back Bar
Direct 3/8Bsp
EQUIPMENT HIRE SERVICE
For use during shut downs of piped medical gas systems
• All Products Charged per day
• Delivery and/or Collection Charged Extra
HES100
HR1500
HR15005
HR1600
XS801
HR16005
HR1601
HR16015
HR1610
SERVICE EXCHANGE ENTONOX UNITS
• NEW for OLD Trade in Arrangement
• Units supplied in exchange are NEW Oxylitre
products with a 7 year warranty
XPRU1
XPRU1L
XPRU2
XPRU3
XPRU1
XPRU3L
S/Ex Demand Unit
(1.5m hose) & Regulator
S/Ex Demand Unit
(3m hose) & Regulator
S/Ex Demand Unit
(1.5m), Regulator & Case
S/Ex Demand Unit &
1.5m Hose & Probe only
S/Ex Demand Unit & 3m
Hose & Probe only
27
HR16105
HR1621
HR1610A
HR16105A
HR1611
HR1601N
HM08G
Electrical Suction Pump 230v AC.
Single 2L Std Jar
O2 Regulator & Flow Gauge
0-15Lpm BN
O2 Regulator & Flow Gauge
0-15Lpm PI
O2 Regulator & Flowmeter
0-15Lpm BN
O2 Regulator & Flowmeter PI
O2 Regulator & S/S Valve BN
O2 Regulator & S/S Valve PI
O2 Regulator 3/8bsp Male
Outlet BN
O2 Regulator 3/8Bsp Male
Outlet PI
MA-4 Regulator & S/S Valve
BN
MA-4 Regulator 3/8Bsp Male
Outlet BN
MA-4 Regulator 3/8Bsp Male
Outlet PI
MA-7 Regulator & S/S Valve
BN
N2O Regulator & S/S Valve
11/16 Nut
G – size Cylinder Trolley
General Rules & Conditions:
SERVICE EXCHANGE TWIN ADAPTORS
• NEW for OLD Trade in Arrangement
• Units supplied in exchange are NEW Oxylitre
Charged, per product per day.
Charged, per full day equipment is used.
Weekend charged minimum two days.
Delivery/Collection charge extra.
Any products damaged will be charged for repair.
Any missing products will be charged for replacement.
products with a 7 year warranty
XT1000
XT1001
XT1002
XT1003
XT1004
S/Ex O2 Twin Adaptor & BS Probe
S/Ex N2O Twin Adaptor & BS Probe
S/Ex MA-7 Twin Adaptor & BS Probe
S/Ex MA-4 Twin Adaptor & BS Probe
S/Ex VAC Twin Adaptor & BS Probe
BACK-UP HOSE ASSEMBLIES
For Back-up System Hose Assemblies to be used
during Shut-Downs please see page: 18
XT1000
Other products available for Service Exchange:
(details on request, UK only)
Mobile Electrical Suction (AC)
Portable Suction (AC/DC)
www.oxylitre.co.uk
28
INDEX
Product
Page
A
Air Regulators
Anti-Static HP Hose
Anti-Static Vacuum Hose
3–7
21
13
B.
Bodok Seals
BN “O” Rings
5
5
Product
Page
F.
M.
Flowmeters & Accessories 9–11
Ferrules (BS)
21
Filters (electrical suction) 13, 16
Filters (pipeline Suction)
13
Filters (portable suction)
15
Filters (entonox)
8
Mobile Suction (electrical)
Mobile Suction (pipeline)
Medical Rail System
Mouthpieces (Entonox)
C.
22
22
22
22
23
24
Dial type Flowmeters
Hose Assemblies
Hose Connections
& Fittings
Humidifiers
Hire Equipment
18
21
11
27
11
21
26–27
Injector Suction Systems
E.
J.
Electrical Suction (mobile)
16
Electrical Suction (portable) 14
Entonox Demand Systems
8
Entonox Regulators
4–6–8
Jars Suction (2000ml)
Jars Suction (1000ml)
17
12
17
K.
1–7
9–11
P.
Pain Relief Systems
(Entonox)
Pipeline Accessories
Pipeline Flowmeters
Pipeline Twin Adaptors
Pipeline Pressure
Reducing Regulator
Pipeline Suction
Probes (british standard
Page
8
20–21
9–11
19
Suction (pipeline + Filters) 12–13
Suction (electrical + Filters) 16
Suction (portable + Filters) 14–15
Suction (injector)
17
Suction Tubing
13
Self Sealing Valves
(BS Indexed)
20
Seals
(bull nose & pin-index)
5
Service Exchange
(New for Old)
26–27
T.
Tubing (suction)
Tubing (oxygen)
Tubing (HP coloured)
Trolleys (cylinder)
Twin Adaptors (pipeline)
V.
Venturi (injector suction)
21
12–13
20
13
11
21
22
19
17
W.
Washers
(bull nose & pin-index)
5
R.
L.
Low Flow Flowmeters
Low Suction (electrical)
Low Suction (pipeline)
Low Suction (portable)
O.
Oxygen Regulators
Oxygen Flowmeters
Product
S.
16
13
23
8
H.
I.
D.
Page
N.
NIST Couplings
NEW for OLD
(service exchange)
G.
Cylinder Keys
Cylinder Trolleys
Cylinder Cradles
Cylinder Rings
Clamps Rail
Cylinder Data (UK)
Product
9–11
16
12
14
Rail (wall mounting)
Rail Clamps
Rail Mounted Flowmeters
Rail Mounted Suction
Regulators (standard)
Regulators (compact)
22
23
9–10
12
1–5
6–7
Abbreviated Terms and Conditions:
• All prices are listed in pounds sterling(£).
• All prices exclude delivery. Which where appropriate will be charged at cost.
• All prices are listed as each, unless otherwise stated.
• VAT is charged at the prevailing rate on the total invoice value. Unless an exemption certificate is supplied with the purchase order.
• All prices are those prevailing at the time of delivery.
• Settlement terms are strictly Nett 30 Days.
• Title of goods remain with Oxylitre until paid for in full.
• Our detailed terms and conditions are available on request.
• We reserve the right to alter prices and/or amend specifications at any time without prior notice.
• This price supersedes all previous ones.
All products are supported by a seven year warranty on function, except consumables and rubber parts, unless otherwise stated on the invoice. Should
a problem arise, please return the product, accompanied by a letter with your details explaining the problem to our Customer Service Department at:
Oxylitre Ltd, Morton House, Skerton Road, Old Trafford, Manchester M16 0W England.
All products are designed and manufactured in accordance with the following European Standards ie.
BS EN ISO 9001:2008. BS EN 13485:2003. CE 93/42 EEC
Waste Electrical & Electronic Equipment Directive 2002/96/EC
WEEE Acc No: 140642. WeeCare Plc: help line no: 0844-800-2004.
WEEE Certificate No: WEE/AJ0509VR
28
www.oxylitre.co.uk
CONTACTS
29
Headquarters Address:
Morton House, Skerton Road, Old Trafford, Manchester. M16 0WJ UK
Contact Numbers: UK
Tel: 0161-872-6322.
Fax: 0161-848-7914.
International
+44-161-872-6322.
+44-161-848-7914.
Office Hours:
09.00am to 5.00pm
09.00am to 3.45pm
Monday to Thursday:
Friday:
Emergency out of hours contact numbers are available.
If required please contact our customer service office.
To place orders or for further information please contact the following departments:
Sales Office
To place orders or for product information & prices:
Tel:
0161-872-6322.
Fax:
0161-848-7914.
e-mail: [email protected]
On-Site Service Office
To request on-site repair or service work and preventative maintenance contracts:
Tel:
0161-872-6322.
Fax:
0161-848-7914.
e-mail: [email protected]
Customer Services Office
To enquire or organise for equipment to be repaired/serviced at our factory
or product returns:
Tel:
0161-872-6322.
Fax:
0161-848-7914.
e-mail: [email protected]
R & D Technical Support
For Technical information:
Tel:
0161-872-6322.
Fax:
0161-848-7914.
e-mail: [email protected]
Quality Department
For Quality and Standards information, complaints or warranty information:
Tel:
0161-872-6322.
Fax:
0161-848-7914.
e-mail: [email protected]
Accounts Office
For Invoice queries and payments:
Tel:
0161-872-6322.
Fax:
0161-848-7914.
e-mail: [email protected] (invoices)
e-mail: [email protected] (payments)
For information on all our
products & services please
check our web site at:
www.oxylitre.co.uk
29
[email protected]
www.oxylitre.co.uk
Morton House, Skerton Road, Old Trafford, Manchester. M16 0WJ. UK
Tel: 0161-872-6322. Fax: 0161-848-7914.