construction, repair and maintenance of machinery and

CONSTRUCTION, REPAIR AND
MAINTENANCE OF MACHINERY
AND INDUSTRIAL INSTALLATIONS
History
MECMAN was officially born in
1993 in Sentmenat, however the
origins must be found 50 years before
in the metallurgical sector and in the
field of repairs and machining.
MECMAN started in a hired
warehouse of 400 m2.
In the beginning it was, above all, a
repair shop equipped with basic
machinery that, allowed MECMAN
to fulfill all the professional
commitments acquired on time. This
fact allowed MECMAN to be known
and respected within the market.
Some years after MECMAN acquired
new land where today are located the
existing facilities.
Since its founding, Mecman has been aimed at
providing the best customer service and
implementing a quality system that ensures the
effectiveness of different existing processes.
Quality Policy
1.- In MECMAN INDUSTRIAL, we have as most important, the complete
satisfaction of our customers. We give them technical solutions and products
to get them continuously, archive his expectations.
2.- Therefore we most know what each customer expect from us.
Responding accordingly, and even, anticipating their needs.
3.- We take as commitment and need, to perform the highest quality, with an
excellent service, together with a reasonable costs.
4.- With keeping this policy, we assure the continuity, prosperity and
reinforcement of our company.
5.- In MECMAN INDUSTRIAL, the greatest strength are his collaborators.
The company needs the involvement of their human resources, to fulfill his
quality objectives.
6.- Our objectives, are not the responsibility of a few, but depend on, of all the
staff and collaborators of MECMAN INDUSTRIAL. Therefore are
transmitted, together with this quality policy.
7.- Make a continuous training plan of our staff, to maximize our human
resources.
8.- We devote a lot of efforts, to be up to date, on last technologies that
concern us.
9.- The optimization of all our processes, (technical and administrative), that
must allow us, be highly competitive.
No Registration REA 09000010214
10.- To accomplish these objectives, we consider that quality should not be
improvised, but must be planned with reference to ISO 9001:2008 Standard.
Our first objective is to get the customer leaves Mecman with absolute
confidence that their problems will be resolved correctly.
Mecman has sufficient human and technical resources, as well as excellent
corporate partners, that make possible solve any problem in a short period
of time and at a very competitive prices.
UNDERSTANDING AND
ADDRESSING A PROBLEM
One of the maxims of Mecman is no problem you
can not try to overcome. Of course, the customer
must prove it.
In Mecman to be a modern and forward looking,
we have the concern, and why not say, but also
the obligation to stay current on the latest trends
and technological innovations.
This does not allow the knowledge to provide the
best solution to the needs that we raised, in an
environment of constant changing and renewing
themselves.
PARK
MACHINERY
MACHINARY C.N.C.
GURUZPE CNC CILINDER LATHE TYPE. A-1000/2 Ø1550 x 5.000 WITH
CNC FAGOR CONVERSATIONAL.
GEMINIS CNC LATHE TYPE. GHT-5 Ø1000 x 3.000 WITH CNC FAGOR
CONVERSATIONAL.
GEMINIS CNC LATHE TYPE. GHT-4 Ø720 x 4.000 WITH CNC FAGOR
CONVERSATIONAL.
NEW IN 2014
DYNAMIC TRAVELLING COLUMN MACHINE “DMF 600 LINEAR”
WITH LINEAR DRIVE AND 6 M X TRAVEL FOR WORKPIECES OF UP
TO 10 T. SK50/ HSK A100 SPINDLE* WITH 413 NM, 5-AXIS
MACHINING AND MILL-TURN TECHNOLOGY WITH B AXIS AND
INTEGRATED NC TABLE.
FIXED BED MILLING “CORREA” MOD. A-30/50
X=5.000mm, Y=1.500mm, Z=2.500mm, CNC “HEIDENHAIN”
TNC-426M”, 60 TOOLS WAREHOUSE, AUTOMATIC ROTATION
HEAD, 4th AXIS SPLITTER, Ø800 WITH POSITIONING EACH 0.1
DEGREES AND 6000 RPM. HEAD.
FIXED BED MILLIG “MTE” MOD. BF-4200
X=4.000mm, Y=1.200mm, Z=1.500mm, CNC “FAGOR” , AUTOMATIC
ROTATION HEAD, 4th AXIS WITH POSITIONING EACH 2.5
DEGREES AND 6000 RPM. HEAD.
FIXED BED MILLING “CORREA” MOD. CF-25/35 X=3.500mm,
Y=1.000mm, Z=1.000mm, CNC “HEIDENHAIN” TNC-530M”, 60 TOOLS
WAREHOUSE, AUTOMATIC ROTATION HEAD, Ø800 AND Ø250 4TH
AXIS SPLITTER, Ø800 WITH POSITIONING EACH 0,1DEGREES AND
6000 RPM. HEAD.
FIXED BED MILLING “MTE” MOD. BF-2700
X=2.500mm, Y=1.000mm, Z=1.250mm, CNC “FAGOR” AND 4th AXIS.
NUMERIC CONTROL MILLING LAGUN MOD. GVC-1000 WITH
AUTOMATIC CHARGER OF 18 TOOLS (X AXIS = 1.000 mm; Y AXIS =
500 mm; Z AXIS = 630 mm; TABLE = 1.200 x 500 mm) WITH NUMERIC
CONTROL HEIDENHAIN TNC-426 AND AXIS SPLITTER 4TH, AXIS
Ø250
CONVENTIONAL MACHINERY
BOILERMAKING MACHINERY
HYDRAULIC PRESS BRAKE AJIAL 170 Tn,
FOLDING LENGTH 3.000mm, SHEET THICKNESS: 12, STROKE: 250mm.
BENDING ROLL LLAVIACUMSA R4/28,
MAX. WIDTH CURVED: 2.050mm, MÁX. THICKNESS: 10mm.
BENDING ROLL EPART MOD. 620,
MÁX. WIDTH CURVED: 2.050mm, MÁX. THICKNESS: 10mm.
HAND HELD BENDING ROLL,
MÁX. WIDTH CURVED: 1.040mm, MÁX. THICKNESS: 4mm.
CIRCULAR SAW FAT 250m
DRILLING ERLO TCA-50, Ø DRILL 50mm.
DRILLING ERLO TCA-40, Ø DRILL 40mm.
RADIAL DRILLING MACHINE SORALUCE.
AXIS STRAIGHTEN PRESS CAMP OF 100Tn.
NOCROAR 280 WELDING MACHINE
VARIOUS AGUILA WELDING MACHINES AND WELDING 1000 TURBO
WELDING ARGON MACHINE CEBORA BRAND MOD.180 ST
VARIOUS WIRE WELDING MACHINES.
GE-870 GEMINIS LATHE WITH DIGITAL AND PLATE Ø870 x 5000mm.
GE-650 GEMINIS LATHE WITH DIGITAL AND PLATE Ø650 x 2000mm.
TRENS TOS LATHE MOD. SN-710-S PLATE WITH DIGITAL Ø720 X
4000mm.
LATHE PR PLATE Ø1200 x 2200mm.
LATINO PINACHO LATHE L-1 MOD. 215 WITH DIGITAL PLATE Ø250 x
1000.
FEXAC MILLING MOD UM WITH DIGITAL 700 x 225 mm
FORTMILL TURRET MILLING MOD. TUM-40
MEASURES 750 x 250 mm WITH AUTOMATIC TYING TOOLS AND
DIGITAL DISPLAY.
IBARMIA 35-CA DRILL
RADIAL FLAG DRILL BRAND MAS VO-50 OF Ø50X1600 WITH TABLE
1000 x 700.
VERTICAL BAND SAW Ø SECTION 600
MEP SHARK 280/SXI HORIZONTAL BAND SAW WITH AUTOMATIC
CYCLE SECTION Ø280.
TABLE TAPPING MACHINE 1000 x 1000 MOD. ROSCAMAT WITH
TAPPING ARM M-3 TO M-22.
TABLE TAPPING MACHINE 800 x 2000 MOD. CMA HRM-45 WITH
TAPPING ARM M-4 TO M-45.
COLOMER SCORE 24 mm
HEAD SCORER FORZA, COUPLED TO MILLING MACHINE.
PRESS OF 125 TON.
MACHINERY ON-SITE MACHINING
1 MACHINE ESPECIALIZED ON-SITE LABOR,
BORING, WELDING, DRILLING AND THREADING
FOR UP TO Ø 800MM,
1 BORING MACHINE WITH CAPACITY UP TO Ø 400
Ø 50 MM, WITH FITTINGS.
1 BORING MACHINE WITH CAPACITY UP TO Ø 1200 OF BAR
Ø 100 MM, WITH FITTINGS.
1 TABLE OF 3000 MM.
1 TABLE OF 1500 MM.
1 MILLING MACHINE FOR TABLES 3 AND 4.
EQUIPMENT FOR TURNING, FOR COUPLING TO THE TABLES 3
AND 4.
1 TIP AXIS LATHE UP TO Ø 400.
1 LATHE FACING TYPE FALNGES UP TO Ø700,
INDOORS OR OUTDOORS.
1 MILLING KEYWAYS.
1 MILLING SMALL SLOTS AND FLAT FORMATS
1 GRINDER CENTERLESS ROLLING HOOPS.
ACCESSORIES FOR ORBITAL DISORDERS, TO THE APPROPRIATE
DIAMETER.
SPECIAL MACHINE FOR SMALL BORES, UP TO Ø 100 MM.
1 DRILLING MACHINE WITH MAGNET FOOT.
The experience accumulated over 15 years combined with our
engineering, allow us to offer solutions to any problems on-site
including machining for oversized parts, carrying out both new
construction or modification of tools.
THECHNICAL OFFICE
CAD-CAM EQUIPMENTS FOR 3D MECHANIZED
LATHE AND MILL CNC MODEL
MASTERCAM SOLIDS VERSION AND
5 AXES MECHANIZED
SYSTEMS WITH MECHANICAL DESIGN SOFTWARE
TOPSOLID AND AUTODESK
INVENTOR SERIES.
MAIN SERVICES
* Repair of industrial machinery
- Solutions dimensional techniques, materials, heat
treatment and surface.
* Construction of machinery made to measure.
* Design and implementation of projects, useful tools and
industrial automation.
* Mecanized in general
- Turning and milling CNC conventional machinery and
up to 5 meters, with the support of CAD / CAM
technologies.
* On-site mecanizing
- Turning and milling using machinery adapted to each
case.
* Outsourcing of specialized personnel and maintenance
plans.
* Representation and Technical Services Officer in Spain:
- Sumitomo (SHI) Demag – (Machinery of plastic
injection molding)
- Yushin – (Take-out Robots for injection plastic
machine.)
- Climax – (Portable Machining & Welding Systems)
MORE OF 2,500 m2 HOUSING
MECMAN FACILITIES
Once the whole process of enlargement is completed
sections and departments will be distributed as follows:
Workshop A - General Section machining, as well as the
Departments of Administration, Production, Engineering,
Technology and Human Resources Office.
Workshop B - Sections Welding, Painting, General
Assembly and repairs.
Workshop C - Division Sumitomo (SHI) Demag / Yushin,
Machine building, Assembly and Special Repairs.
Workshop D – Weldery General Section.
Workshop E – Exhibitions Section, Open House.
The acquisition of new workshops and the new distribution
of sections and departments leads, us also to have more
"stagein"
THE POSSIBILITIES
OFFERED MECMAN
Demonstrated ability to provide the most appropriate
solutions to different needs makes Mecman a suitable
company to serve PYMEs, large companies,
multinationals and even companies established in other
countries as is the case with Romania and Mexico.
MECMAN has sufficiente human and technical
resources, as well as excellent corporate partners, that
make possible to solve any problem in a short period of
time and at a very competititve prices.
At present Mecman has a staff of over 45 professionals, including CNC, conventional machinery, welding,
mechanical, electron-technical engineering, electronics operators.
In time off, among its permanent staff and external collaborators, MECMAN may have over 100 professionals
working on different projects.
REPAIRS
Internal workshop
External by customer’s
Outsourcing /
Maintenance
Organizat
Organization Funct
Functional
ctional (2)
Management
Engineering
Technical office
CONSTRUCTIONS
Mechanicals
Usue tools
Special Machinery
Productions
Systems
Manegament
Systems
Administration
Commercial
MACHINING
Workshop
Conventional
Purchases
Information
Systems
Quality
CNC
On-site
MECMAN intended as a reference service and technical solutions.
Accounting
RRHH
Technical
Office
Commercial
Areas
THE COMPANY YOU EXPECTING TO FIND
MECMAN INDUSTRIAL
Avda. Principal, 41 Pol. Ind. Can Clapers
08181 Sentmenat (Barcelona) • Apdo. correos, 98
℡ +34 / 902 636 717 +34 / 902 636 718
E-mail: [email protected] • www.mecman.es
Representation and Technical Services Officer in Spain:
Sumitomo (SHI) Demag / Yushin / Climax
℡ +34 / 902 882 778 +34 / 902 882 779
E-mail: [email protected]
E-mail: [email protected]