general.catalog

INCOMPARABLE TECHNOLOGY
GENERAL.CATALOG
INCOMPARABLE
TECHNOLOGY
SINCE 1918
Index
4|13
Company Profile
14
CNC
16
26
30
Index
DOUBLE.SERIES
Double head
MASTER.SERIES
Standard gantry frames
PRO.SERIES
Special gantry frames
DOUBLE.JET
EVO.JET
DOUBLE.CSF
EVOLUTION
MASTER.TGV
MASTER.FLAT
MASTER.RAIL
PRO.5+3 RAIL
PRO.5+3 FLAT
PRO.3+3 RAIL
38
ONE.SERIES
Gantry frames for batch one
MASTER.ONE
42
ARTIST.TGV
ARTIST.JET
ARTIST.FLAT
48
WIN.SERIES
Doors & Windows with rails&pods
MASTER.WIN TWO
MASTER.WIN
54
LINER.SERIES
Doors & Windows in batch one
EVOJET.LINER
SHARP.LINER
JET.LINER
60
TWIN.SERIES
Mobile upright for fixtures
AVANT
TWIN
SMART.JET
66
JET.SERIES
Mobile upright for jig-less
TWIN.JET
JET
JET.L
72
ADVANCED.SERIES
Gantries for enhanced accuracy
MASTER.ADVANCED
76
SOFTWARE
80
CUTTING DIVISION
84
HORIZONTAL
Thin cutting
88
VERTICAL
Band saws
92
CONVENTIONAL
ARTIST.SERIES
Entry level gantries
|5
The Company
Branches
Headquarter
Charlotte
North Carolina
Italy
Dongguan
Guangdong
BACCI PAOLINO
BACCI MECCANICA
BACCI CUTTING DIVISION
BACCI AMERICA
BACCI CHINA
Headquarter
Metal working
production
Commercial division
for thin straight
and shaped cut
North American
subsidiary
Far East
subsidiary
100% Made in Italy
100% owned by Bacci family for 4 generations
Market leader worldwide
2 commercial divisions (CNC machines and cutting division)
More than 40 international patents
2 direct subsidiaries (USA and China)
Strong and wide service team
Total reinvestment of profits
Over 2000 CNC machining centrers sold since 1996
6|
BACCI AMERICA is the new Bacci subsidiary located in Charlotte, NC.
Established in 2014 following the request
of our North American customers to have
a direct connection with Paolino Bacci, our
experts Bacci engineers are on-site to offer prompt and professional after sales service. Additionally, a wide stock of spares
is available for immediate part replacement.
BACCI CHINA, the first Bacci subsidiary,
opened in 2006 to provide direct after sales
servaice support to all our customers in Asia.
Our office is located in Dongguan, a city in
South China, near Hong Kong.
Today
100 years of innovation
1918
Once upon a time
1950
Industrial production begins
Under the leadership of Giuseppe, Paolino’s son, the
company began to specialize
in the manufacturing of woodworking machines for chair
production.
Following WWI, Paolino Bacci
started production of band
saws for supplying local woodworking shops in Cascina, Pisa
(Italy).
The machines were immediately recognized as having superior quality due to their rigidity
and reliability.
2014
BACCI America
1986
1st Italian IWF CHALLENGERS
AWARD Winner
After many successful years of
sales in the US through importers, BACCI decided to further
increase sales and its market
share through the opening of
a direct subsidiary to provide
sales and after sales support
to its customers in the US &
Canada.
The innovative capacity of the
company was confirmed when
BACCI became the first Italian company to receive
the Challengers award
IWF, the prestigious award
bestowed by the International
Woodworking Fair (IWF) in Atlanta, GA.
Currently, BACCI is recognized as the world leader in the
production of CNC machining centers with 5 or more
interpolated axes for the machining of a wide variety of
materials including wood, plastic, composites, and aluminum.
Incomparable technology since 1918!
2008
BACCI Cutting Division
With the 100% acquisition of
“Veneta Macchine”, a company specialized in the production of vertical band saws for
curved cutting and horizontal
band saws for thin cutting,
BACCI further extended its
product lines.
2006 BACCI China Rep Office
China became the largest export market. To better serve customers, the company opened a
technical and sales branch located in the city of Dongguan, in the
Guangdong region, the heart of
Chinese furniture manufacturing.
The new factory
1991
BACCI MECCANICA
In order to reorganize production along industrial lines, metal frame machining was split
from machines assembly. The
new company, BACCI MECCANICA, opened its own,
new plant facilitiy.
8|
2001
1st CNC machining center by
BACCI
In the mid 90’s, to meet market demands and satisfy the growing request for production flexibility, BACCI introduced the first 5-axis
multiple spindle CNC machine.
The company expanded beyond
the chair manufacturing industry, as
these new flexible machines were
capable of handling applications
from wood, plastic, and composites.
1995
1998
1st 5-axis double head
CNC machine
In 1998, BACCI became the
first company in the world
to manufacture CNC machining centers with double 5-axis heads, able to machine the same piece with two
working heads simultaneously.
For the programming, BACCI
developed PITAGORA software,
which is a very innovative 3D
anti-collision simulating software.
With increasing orders, the
production moved to a new,
modern plant next to BACCI
MECCANICA.
|9
service
A STRONG TEAM THAT GIVES ITS BEST EVERY DAY
we work with the best
Leading manufactures know that in order to deliver the best quality possible they must make an
investment when it comes to building their business and their productions. BACCI works with the
best manufactures in the world confirming the quality and reliability standards of BACCI machines!
Considering the increasing number of CNC machining centers sold, BACCI dedicates extreme care to the after sales service by continuously investing in it. The opening of technical and
commercial branches of BACCI in the US and China, together with the growth and training of
its service team, show BACCI’s dedication to customer satisfaction. BACCI’s strong and united
service team is available 365 days a year, giving their best every single day.
The company’s “mission” is customer satisfaction through innovative customized solutions and
fast service.
10 |
| 11
Applications
BACCI range of production
DOORS & WINDOWS
SPORTS EQUIPMENT
CHAIRS &
FURNITURE
FLOORING
ALUMINUM
& COMPOSITES
12 |
14 |
| 15
DOUBLE 5-AXIS HEADS TO
DOUBLE UP YOUR OUTPUT
DOUBLE.SERIES
D.r.d.p two seater sofa by Roberto Lazzeroni Ceccotti Collezioni, Italy
16 |
| 17
PAOLINO BACCI’S
CUTTING EDGE TECHNOLOGY
12-AXIS CNC MACHINING CENTER
THE ONLY DOUBLE HEAD CNC MACHINE ABLE
TO WORK THE SAME PIECE
WITH THE 2 HEADS SIMULTANEOUSLY*
z
Operating Unit T2+2 type
x
Jigless clamps with automatic
CNC positining along X&Z strokes
Removable TGV tables
for fixture works
Outstanding features:
Half the cycle time with higher outputs compared to conventional solutions with a single working head
Jig-less clamps are adjustable in height and tiltable to hold straight and
curved parts with ease
technical data
DOUBLE.JET is a high productivity double head
CNC machining center with 12 interpolated axes able
to machine the same piece with the two 5-axis heads
simultaneously. Equipped with 2 automatic hopper
feeders designed to ensure fast loading/unloading
and the best possible ergonomic conditions. The 3+3
jig-less pneumatic clamps are tiltable and adjustable
in height in order to hold parts without fixtures. Automatic setup of the clamps along the X and Z axis is
managed by Pitagora software.
Number of controlled axis
12
Loader axis
2
Longitudinal X axis
1,700 / 2,400 / 2,950 mm
Transversal Y axis
1,300/1,800 mm
Vertical Z axis
650 mm
A axis
Unlimited
B axis
260°
18 | DOUBLE.SERIES
CNC
CUTTING
DOUBLE.JET
Info
CONVENTIONAL
Automatic positioning of the clamps managed by Pitagora software
Multiple spindle operating units with
no waste of tool changing time
*BACCI double head machines do not need 4 tables to double up your production.
| 19
CUSTOMIZED FOR
YOUR NEEDS
12-AXIS CNC MACHINING CENTRE
Highly customizable in size and options:
From 2 up to 4 independent working stations
Automatic feeding systems with hopper feeders
Tables with Variable Geometry TGV (BACCI Patent)
for manual loading
Automatic feeding systems through
hopper feeders
Jig-less clamps are adjustable in height and tiltable to hold
straight and curved parts with ease
Automatic positioning of the clamps managed by PITAGORA
software
Motorized CNC clamps for superfast positioning to manage
random part lengths
Tables with Variable Geometry TGV type
(Bacci Patent) for manual loading on fixtures
Free-Jigs device
z
y
technical data
EVO.JET is a flexible and versatile double head CNC
machining center that can be customized both in
terms of number and types of working tables. EVO.
JET offers different loading systems such as: automatic hopper feeders, manual loading system
through free-jigs pneumatic clamps, or the Variable
Geometry TGV table (BACCI Patent).
Interpolated axis
Longitudinal X axis
Transversal Y axis
Head transversal Y axis
Vertical Z axis
20 | DOUBLE.SERIES
12 or more
3,400 mm or greater
1,300 mm
1,000 mm
750 mm
EVO.JET
Info
x
Motorized CNC clamps for
superfast positioning to manage
randomly different parts length
CNC
CUTTING
CONVENTIONAL
*BACCI double heads machines do not need 4 tables to double up your production.
| 21
11-AXIS CNC MACHINING CENTER
10-AXIS CNC MACHINING CENTER
CSF2 double reference system
EVOLUTION with 2 independent TGV tables (optional)
CSF2 automatic hopper
feeder detail (Patented)
DOUBLE.CSF2 is a double head CNC machining
center with 10 interpolated axes, numerically controlled, equipped with automatic CSF2 hopper feeders. DOUBLE.CSF2 is designed for fast operations
such as: tenoning, finger jointing, boring, mortising,
milling, and complex, 5-axis profiling both at the ends
of the elements and also between the ends.
Number of controlled axis
Loader axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
A axis
B axis
22 | DOUBLE.SERIES
CNC
11
3
2,400 mm
650 mm
1,000 mm
Unlimited
260°
CUTTING
CONVENTIONAL
Info
technical data
EVOLUTION is a double head CNC machining
center with 11 interpolated axes equipped with 1 rotating table with 2 TRC loading stations. The rotating
table, which keeps the loading area compact, matches perfectly with robot feeding. The wide Z stroke
allows machining operations even from the bottom.
EVOLUTION can perform simultaneous machining
on the same piece or two different pieces at the same
time, one for each head. If requested, EVOLUTION
is available with 2 independent TGV working tables.
Interpolated axis
Rotating table axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
A axis
B axis
Max length of pieces
CNC
CUTTING
CONVENTIONAL
5+5
1
2,400 mm
800 mm
1000 mm
unlimited
400°
2,000 mm
EVOLUTION
technical data
DOUBLE.CSF2
Info
DOUBLE.SERIES | 23
GANTRY SOLUTIONS
FOR MAXIMUM
VERSATILITY
Plywood chair by Sedilcurvi, Italy
24 |
| 25
MAXIMUM VERSATILITY
6-AXIS CNC MACHINING CENTER
A wide range selection
of customized solutions tailored to your needs
Outstanding features:
Heavy duty fixed gantry frame: very
rigid Monolithic structure
Highly customizable in size and
optional equipments
Folding bellows
as option
Multiple spindle operating unit
for quick tool changing
Standard operating unit T4P with
4 independent electro spindles
Variable Geometry TGV tables
(BACCI Patent)
NC Turning lathe device
top clamps
dove tail
guides
technical data
MASTER.TGV is a CNC machining center with 6 interpolated axes, 2 independent TGV working tables (BACCI
Patent), and a multiple spindle operating unit for fast tool
changing. Thanks to the very rigid gantry frame, MASTER.
TGV is a very precise machine ideal for machining elements
for chairs, furniture, tables, beds, shells, stairs, musical instruments, moulds, as well as many other applications.
Number of controlled axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
Standard table length
B axis
C axis
CNC
6
3.000 mm or more
1.800 mm or more
750 mm or more
1.170 mm
unlimited
400°
CUTTING
MASTER.TGV
Info
26 | MASTER.SERIES
vacuum cups
CONVENTIONAL
side pneumatic
clamps
Tables with Geometry Variable “TGV” (BACCI Patent). Extremely
rigid steel rails with dove-tail guides for the fixing of lateral
clamps, top clamps, vacuum cups.
| 27
6-AXIS CNC MACHINING CENTER
6-AXIS CNC MACHINING CENTER
Operating unit T3F type
for folding operations
Removable TGV table
to equip over the flat table
The MASTER.FLAT is a flexible CNC machining
center with 6 interpolated axes, 2 independent FLAT
working tables (available in different sizes), and a
multiple spindle operating unit for fast tool changing.
Equipped with FOLDING working head, MASTER.
FLAT is suitable for the machining of panels, but also
for chairs, furniture, tables, beds, shells, stairs, musical instruments, moulds, as well as many other applications.
Full digital NC axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
B axis
C axis
28 | MASTER.SERIES
CNC
6
3.600 mm or more
1.800 / 2.200 / 2.600 or more
750 / 950 / 1.130 or more
unlimited
400°
CUTTING
CONVENTIONAL
Operating unit type T3+2. 3 single
exit spindles and 1 double exit spindle. Suitable to execute operations
“flush” to the machine’s tables.
Info
technical data
MASTER.RAIL 6-axis CNC machining center with
2 tables and multiple spindle heads for quick tool
changing offers the most advanced and complete
clamping solutions: push button rail positioning,
vacuum cups, side pneumatic clamps, top clamps,
lift-up supports to ease manual loading/unloading,
and reference stops on the middle of the rails and on
the LH and RH sides too. The Advance tables make
MASTER.RAIL ideal for the machining of elements
for doors, windows, flat panels, and curved solid
wood parts with clamping fixtures.
Number of controlled axis
CNC
CUTTING
CONVENTIONAL
Longitudinal X axis
Transversal Y axis
Vertical Z axis
B axis
C axis
6
5.400 mm or more
1.800 / 2.200 / 2.600 mm or more
750 / 950 / 1.130 mm or more
unlimited
400°
MASTER.RAIL
technical data
MASTER.FLAT
Info
Wide TGV rails (up to 2 meters long)
with advanced clamping & positioning
systems
MASTER.SERIES | 29
TOP OF THE CLASS
MULTIPLE HEADS
GANTRY MACHINES
Windsor Stressless sofa leg by Ekornes, Norway
30 |
| 31
5+3 = AN AMAZING
COMBINATION
CNC MACHINING CENTER WITH MULTIPLE HEADS
BACK SIDE
5 axes unit
on the back side
of the machine
A new and innovative concept for CNC routers
FRONT SIDE
3 axes units
on the front side
of the machine
Outstanding features:
Heavy duty fixed gantry frame
A 5-axis unit on the back of the gantry and two
3-axis units on the front of the gantry
5-axis aggregate unit
Simultaneous machining with the dual 3-axis
and 5-axis units
3 axes multiple drilling unit
Fast tool changing always masked
Up to 80 different tool changer positions
Automatic tool changer for 3 axes /
5 axes unit
technical data
PRO.5+3 RAIL is a new and innovative concept for
CNC machining centers. It combines a 3-axis router
with a 5-axis unit for the production of both flat elements and complex 5-axis machining. The setup of
the tables is very fast thanks to the motorized positioning of the rails and pods. The repositioning of the
rails and pods can be done even during the cycle.
Numerical controlled axis
10
Longitudinal X axis for 5-axis
6.800 mm
Longitudinal X axis for 3-axis 6,800 max /500 min
Vertical Z axis
400mm
Working tables
2,500x 1,575mm each
PRO.5+3 RAIL
Info
5-axis CNC operative unit
32 | PRO.SERIES
CNC
CUTTING
CONVENTIONAL
5-axis multiple drilling unit
| 33
CNC 3 AXES ROUTER
WITH MULTIPLE HEADS FOR THE
HIGHEST PRODUCTIVITY*
3-AXIS CNC MACHINING CENTER WITH MULTIPLE HEADS
Outstanding features:
Heavy duty fixed gantry frame
N°1 3-axes unit on the back of the gantry
+ n°1 3-axes units on the front of the gantry
Automatic rails & pods setup
Barcode reading or automatic CSV file
interface
Parametric programming
Simultaneous machining on separate tables
Tool changing in full masked time
Up to 96 tools positions
CABINETS
WEEKLY ORDER
CSV
FILE
TOUCH SCREEN
PC
PITAGORA
CSV
PART
PROGRAMS
CABINET
SELECTION
MACHINE
PC
CNC
MACHINE
technical data
PRO.3+3 RAIL is a double 3-axis machining center
with 2 independent rails & pods tables.The two 3-axis
operating heads can work independently on separate
tables, increasing the machine output.
PRO.3+3 RAILS is ideal for the shaping and sanding
of cabinet doors & drawers. The machine is equipped
with a touch screen software interface and a bar code
reading system (one for each table) for immediate table set-up.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
Working tables
34 | PRO.SERIES
3+3
4.700 mm
3.300 mm
400 mm
1.575 x 1.000 mm / each
PRO.3+3 RAIL
Info
CABINET
MACHINING
Bar code reader
CNC
CUTTING
CONVENTIONAL
* 600 cabinets doors / shift (shaped and sanded)
| 35
CNC MACHINING CENTER WITH MULTIPLE HEADS
1
2
3-AXIS CNC MACHINING CENTER WITH MULTIPLE HEADS
3
Dual 3-axis machining
Operating unit type T2A with 2 independent rotative axes: compact dimensions with 2 independent spindles.
PRO.5+5 FLAT is a 10-axis machining center (plus
the 2 interpolated axes of the numerically controlled
tool changing magazines) with double operating
heads and 2 independent flat tables, ideal for machining complex pieces in mass production. Each
operating head is independent and can machine various components simultaneously. Ideal for machining
both panels and curved solid wood.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
B axis
C axis
Working table
36 | PRO.SERIES
CNC
5+5
7,000 mm
2,600 mm
950 mm
unlimited
400°
2,400x1,800mm/each
CUTTING
CONVENTIONAL
Chips deflector interpolated around C Axis
Info
technical data
PRO.3+3 FLAT is a double 3-axis machining center
with 2 independent FLAT tables for vacuum clamping. The two 3-axis operating heads can work independently on separate tables, increasing the machine
output. PRO.3+3 FLAT is ideal for panel nesting
operations but also for machining operations that require simultaneous machining with the dual 3-axis.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Working tables
CNC
CUTTING
CONVENTIONAL
3+3
5.900 mm max / 500mm min
2,600 mm
2.000x1.500mm/each
PRO.3+3 FLAT
technical data
PRO.5+5 FLAT
Info
Automatic tool changer 24 positions
PRO.SERIES | 37
COMPLETE PROCESSING
WITH ONLY ONE CLAMPING
FOR STRAIGHT AND
CURVED PARTS.
Chair component by Karimoku New Standard, Japan
38 |
| 39
FROM THE BLANK TO THE FINISHED PIECE
IN ONLY 1 CYCLE
WITH A SINGLE MACHINE*
41-AXIS CNC MACHINING CENTER
Outstanding features:
JIG-LESS BATCH-ONE with PIECE EXCHANGE*
Double operating heads able to work simultaneously
on two pieces
Multiple spindle operating unit to reduce tool changing
time
Jig-less clamps with automatic positioning along the X,
Y, and Z axes to minimize setup times
Automatic exchange of pieces between clamps both
for straight and curved parts
Automatic unloading system
BACK SIDE
FRONT SIDE
Automatic piece exchange sequence – RH table
technical data
MASTER.ONE is a 41-axis CNC machining center
with double heads, one for each side of the gantry
frame, which are able to work simultaneously on separate tables that exchange the parts for a complete process with only 1 set-up. Heavy duty jig-less pneumatic
clamps are numerically controlled in all directions (X, Y,
and Z) for an immediate set-up that makes the machine
perfect for “one-batch” productions. The machine can
work both straight and curved parts. A dedicated version for windows & doors is also available.
Controlled axis
Vertical Z axis
A axis
C axis
Table’s length
40 | ONE.SERIES
N. 41
750 mm or more
unlimited
400°
1,400mm or more
MASTER.ONE
Info
Automatic piece exanchage sequence – piece exchange
*Suitable for wooden components produced in “batch size”
| 41
THE 5-AXIS MACHINE
FOR EVERYONE
Guitar, Polaris Musical Instruments Co. LDT by Joe Marinic, Germany
42 |
| 43
THE ENTRY LEVEL
5-AXIS
CNC MACHINING
CENTRE
6-AXIS CNC MACHINING CENTER
Quality and flexibility:
Multiple applications in solid wood, plastic,
and composite materials
Operating head T2+2 type
Unique features:
Multi spindle operating head for fast tool changing and
short cycle times
Heavy duty fix gantry frame:
very rigid Monolithic structure
Tables with Variable Geometry TGV (BACCI Patent).
Etremely rigid steel rails with dove-tail guides for fixing
lateral clamps, top clamps, and vacuum cups
technical data
ARTIST.TGV is a 6-axis CNC machining center with
2 independent TGV working tables (BACCI patent). ARTIST.TGV is equipped with one T2+2-type
operating head. A very versatile machine suitable
for many applications: elements of furniture, chairs,
sports equipment, musical instruments, plastic, and
composite materials.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
A Axis
C Axis
44 | ARTIST.SERIES
6
2.600/3.500 mm
2.200 mm
830 mm
unlimited
400°
ARTIST.TGV
Info
ARTIST.TGV version with 1 working table only
| 45
5-AXIS CNC MACHINING CENTER
6-AXIS CNC MACHINING CENTER
Heavy duty flat table structure in steel
Steel plate
Frontal removable jig-less clamps with double
rods. Quick installing/removing (only 4 screws)
Semi automatic setup of the clamps managed
by Pitagora software
Bakelite
ARTIST.JET is a 6-axis CNC machining center equipped with
2 independent working TGV tables (BACCI patent). Removable 3+3 frontal jig-less pneumatic clamps can be attached to
the front of the TGV rails in order to hold parts without fixtures.
Parts can be loaded manually or through automatic hopper
feeders.
Number of controlled axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
A Axis
C Axis
46 | ARTIST.SERIES
CNC
CUTTING
6
3.500 mm
2.200 mm
830 mm
unlimited
400°
CONVENTIONAL
Info
technical data
ARTIST.FLAT is a 5-axis machining center with a flat
vacuum working table that makes the machine suitable for flat panel works as well.
ARTIST.FLAT is equipped with one T1M operating
head and an 8-position automatic tool changer (HSK
63 F).
Number of controlled axis
5
2.500 mm
Longitudinal axis X
2.600 mm
Transversal axis Y
830 mm
Vertical axis Z
unlimited
Axis A
400°
Axis C
Table Size
size
1.250x1250
CNC
CUTTING
CONVENTIONAL
Small
Large
5
2.500 mm
3.000 mm
830 mm
unlimited
400°
1.250x2.400
ARTIST.FLAT
technical data
ARTIST.JET
Info
ARTIST.SERIES | 47
INNOVTIVE ROUTERS FOR
DOORS AND WINDOWS
Window frame by Leiab, Sweden
48 |
| 49
5-AXIS MULTIPLE SPINDLE HEAD
COMBINED WITH RAILS & PODS TABLES
6-AXIS CNC MACHINING CENTER
Outstanding features:
Heavy duty fixed gantry frame
Moving tables to ease manual loading/unloading
Multiple spindle head for fast tool changing
Multiple drilling unit turns around the C axis
Automatic rails & vacuum pods set-up
Multiple clamping solutions (vacuum cups, clamps, vices)
Drilling unit with C axis rotation
Pneumatic
clamps
vacuum cups
liftups
technical data
MASTER.WIN TWO is a twin table machining center with 6 axes and a fixed gantry structure for doors
and windows. The 5-axis multiple spindle head allows
machining operations with less tool changing and
without the need for aggregate units. The working
table is equipped with aluminum rails and a manual
pushbutton-controlled positioning or automatic numerically controlled positioning.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
B Axis
C Axis
6
6.200 mm
3.800 mm
950 mm
unlimited
400° (unlimited as option)
MASTER.WIN TWO
Info
fences
Chips
extraction belt
50 | WIN.SERIES
CNC
CUTTING
CONVENTIONAL
Tables with motorized rails & pods
| 51
5-AXIS CNC MACHINING CENTER
5-AXIS CNC MACHINING CENTER
T4C-H
5 axis operating unit type
T4C-H. Each of the 4 independent electro-spindles can
rotate in order to offer several
machining configurations as
the folding operations or double profiling
Operating unit type T1+2. In addition to the
main spindle it’s possible to equip a compact
5 axes double exits spindle to avoid the use of
aggregate units.
Dust extraction hood near spindle
interpolated around C axis
MASTER.WIN is a single table machining center
with 5 axes and a fixed gantry structure for doors and
windows. The 5-axis multiple spindle head allows
machining operations with less tool changing and
without the need for aggregate units. The working
table is equipped with aluminum rails and a manual
pushbutton-controlled positioning or automatic numerically controlled positioning.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
B Axis
C Axis
52 | WIN.SERIES
CNC
5
4.100 mm
2.600 mm
750 mm or more
unlimited
400° (unlimited as option)
CUTTING
CONVENTIONAL
Info
technical data
MASTER.WIN is a single table machining center
with 5 axes and a fixed gantry structure for doors and
windows. The 5-axis multiple spindle head allows
machining operations with less tool changing and
without the need for aggregate units. The working
table is equipped with aluminum rails and a manual
pushbutton-controlled positioning or automatic numerically controlled positioning.
Interpolated axis
5
Longitudinal X axis
2.400 mm
Transversal Y axis
3.800 mm
Vertical Z axis
750 mm or more
B Axis
unlimited
C Axis
400° (unlimited is optional)
CNC
CUTTING
CONVENTIONAL
WIN.SERIES | 53
MASTER.WIN
technical data
MASTER.WIN
Info
SOLUTIONS
FOR DOORS PRODUCTION
IN BATCH ONE
Door stile by Invado, Poland
54 |
| 55
THE PERFECT MATCH: ULTIMATE
PRODUCTIVITY AND FLEXIBILITY FOR DOORS,
WINDOWS AND CABINETS PRODUCTION
12-AXIS CNC MACHINING CENTER
Outstanding features:
Double operating heads work simultaneously on the same piece
CNC adjustment of the clamps for a total setup in masked time
Automatic feeding/outfeeding system with buffers
Automatic parametric programming interfaces with CSV files
or barcode reader
Simultaneous machining
Plausibility check to avoid operator loading mistakes
2 drilling units with 7 fuses each
Reinforced clamps for heavy duty
machining operations with wide depth
Blank cut off + Pre-measurement units
technical data
EVOJET.LINER, the top of the range of the LINER.
SERIES, is a double head CNC machining center with
2 independent working tables. Each table is equipped
with 4 reinforced pneumatic clamps for heavy duty
machining operations and an automatic loading/
unloading system. EVOJET.LINER is suitable for
the production of elements for doors in one batch
with the PITAGORA parametric programming
software, the automatic reading of blank sizes, the
sawing unit, and the fast positioning of the motorized
clamps.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
A Axis
C Axis
Table length
56 | LINER.SERIES
12
7.200 mm
1.300 mm
750 mm
unlimited
+/-180°
3.000 mm
EVOJET.LINER
Info
2 levels loading/unloading system to minimize waits
CNC
CUTTING
CONVENTIONAL
| 57
5-AXIS CNC MACHINING CENTER
5-AXIS CNC MACHINING CENTER
Machine with rigid gantry structure equipped with:
Machine with rigid mobile upright
structure equipped with:
• 1 working heads with 2+2 double exit electrospindles.
• 1 table 3000mm long with 4 reinforced clamps.
• Motorized CNC clamps for superfast positioning to manage randomly different parts length.
• Side fence automatically adjustable in Y direction (BACCI PATENT)
to manage randomly different width of parts.
• Automatic in-line feeding/outfeeding system.
• Pitagora Parametric software (BACCI Exclusive) for an easy and
fast programming.
•
•
•
•
•
•
Interpolated axis
Longitudinal axis X
Transversal axis Y
Vertical axis Z
Axis A
Axis C
Table length
58 | LINER.SERIES
CNC
5
1.700 mm
5.000 mm
830 mm
unlimited
+/-180°
3.000 mm
CUTTING
SHARP.LINER
technical data
1 working heads with 2+2 double exit electrospindles.
1 table 1800 mm long with 3 reinforced clamps
(cabinet doors).
Motorized CNC clamps for superfast positioning
to manage randomly different parts length
Side fence automatically adjustable in Y direction (BACCI PATENT) to manage randomly different width of parts.
Automatic in-line feeding/outfeeding system.
Pitagora Parametric software (BACCI Exclusive)
for an easy and fast programming.
CONVENTIONAL
CNC
CUTTING
technical data
JET.LINER 2200
Interpolated axis
Longitudinal axis X
Transversal axis Y
Vertical axis Z
Axis A
Axis C
5
2.200 mm
1.300 mm
650 mm
unlimited
+/- 180°
CONVENTIONAL
JET.LINER 3200
5
3.200 mm
1.300 mm
650 mm
unlimited
+/- 180°
LINER.SERIES | 59
MOBILE UPRIGHT MACHINES
FOR FIXTURE CLAMPING
Branca chair by Mattiazzi, Italy
60 |
| 61
MOBILE UPRIGHT MACHINES
FOR FIXTURE WORKS
8-AXIS CNC MACHINING CENTER
Outstanding features:
Great performance of axis speeds (up to 100m/min)
Multi spindle operating unit for quick tool changing (less than 1
second)
Possibility to machine pieces from the bottom to the top thanks to
the wide Z stroke
“TRH” horizontal rotating table
TGV tables (BACCI patent) allow several clamping solutions
(vacuum cups, side pneumatic clamps, vices)
Easy setup of the TGV tables (setup in 1 direction only)
90° table position
180° table position
Optional operating unit T2+2 type
The horizontal rotation of the TRH TGV table allow drillings of the bottom side in the same setup
technical data
The 8-axis CNC machining center model AVANT is
equipped with two independent TGV working tables
(BACCI Patent) with unlimited rotation along the horizontal (TGV-H) or vertical axis (TGV-TRC). The structure of the working tables together with the high Z
stroke of the machine allows machining operations
from the bottom to the top. In this way, all 6 sides of
a piece can be machined. The machining operations
are performed outside the Y frame, and this prevents
chips or wood wastes from falling onto moving parts.
Interpolated axis
8
Longitudinal X axis
3.400 mm / 4.400 mm
Transversal Y axis
1.800 mm
Vertical Z axis
1.250 mm
B Axis
unlimited
C Axis
400°
A axis (working table axis)
> 360°
62 | TWIN.SERIES
AVANT
Info
“TRC” vertical rotating table
CNC
CUTTING
CONVENTIONAL
| 63
6-AXIS CNC MACHINING CENTER
5-AXIS CNC MACHINING CENTER
The 6-axis numerically controlled TWIN machining
center, equipped with two independent TGV tables
(BACCI Patent) and a multiple spindle operating unit
for quick tool changing, can perform, in a single setup, different machining operations traditionally carried
out on several conventional machines. This includes:
boring, mortising, finger jointing, milling, and 4/5-axis
profiling on several components of chairs, tables, and
sofas.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
Contouring on Y
B axis
C axis
64 | TWIN.SERIES
CNC
6
2.200 mm / 3.400 mm
1.800 mm
1.250 mm
1.200 mm
unlimited
400 °
CUTTING
CONVENTIONAL
Info
technical data
SMART.JET is an extremely compact 5-axis CNC
machining center with a single working TGV table
(table with Variable Geometry, BACCI Patent) able to
perform all the typical operations such as boring, cutting, mortising, finger jointing, etc., but also complex
5-axis machining on solid wood, plastic, and composite materials. A flexible 5-axis CNC machine at an
affordable price.
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
B Axis
C Axis
CNC
CUTTING
CONVENTIONAL
5
1.550 mm
1.300 mm
650 mm
unlimited
400 °
SMART.JET
technical data
TWIN
Info
TWIN.SERIES | 65
MOBILE UPRIGHT MACHINES
WITH JIG-LESS CLAMPING
Superleggera chair by Gio Ponti, Cassina, Italy
66 |
| 67
JIG-LESS MOBILE UPRIGHT MACHINES
WITH AUTO FEEDING SYSTEMS
6-AXIS CNC MACHINING CENTER
Outstanding features:
Double Reference system (BACCI Patent)
Jig-less clamps for clamping the details without fixtures
Double Reference System
Simultaneous loading/unloading system (BACCI Patent)
Automatic setup of the clamps along the X and Z direction
managed by the Pitagora software
Removable TGV tables for fixture works
Manual loading with pneumatic clamps
and reference fences.
Tiltable Jig-less pneumatic clamps
(no need of fixtures) with double rods
for straight and curved elements with
anti spring back system.
technical data
The 6-axis TWIN.JET machining center is equipped
with 2 independent working stations with automatic
hopper feeders and jig-less pneumatic clamps that
allow loading/unloading operations in masked time.
This machining center features a high-speed mobile
upright (100m/min.) that moves longitudinally (X axis).
Interpolated axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
A Axis
C Axis
6
3.400 mm
1.300 mm
650 mm
unlimited
270 °
TWIN.JET
Info
2 independend working tables with 3 working stations (1 manual, 2 automatic)
68 | JET.SERIES
CNC
CUTTING
CONVENTIONAL
| 69
5-AXIS CNC MACHINING CENTER
5-AXIS CNC MACHINING CENTER
Manual feeding with preloading systemfor
assisted loading.
Synchronous loading/unloading (Patented) to minimize the stops (less than 3 seconds)
Special pneumatic clamps for round sections
Info
technical data
JET is a single table machining center with 5 interpolated axes, designed for machining operations such
as tenoning, finger jointing, drilling, mortising, milling,
and 5-axis profiling.
The machine is equipped with 3 adjustable pneumatic clamps that allow clamping on both right and left
pieces with a single setup thanks to the double reference system (a BACCI patent) for right and left legs.
NC Full digital axis
5
Interpolated linear axis
3
Interpolated rotating axis
2
Longitudinal X axis
1.800 mm / 2.200 mm
Transversal Y axis
1,300 mm
Vertical Z axis
650 mm
JET.L is a numerically controlled machining center
with 5 interpolated axes, designed for machining
operations such as tenoning, finger jointing, drilling,
mortising, milling, and 5-axis profiling.
Designed to machine long pieces (frames, beds,
stairs, face frames), this machining center features a
high-speed mobile upright (100m/min.) that moves
longitudinally (X axis).
The machining center can be equipped with 1 or 2
automatic hopper feeders and 1 or 2 pre-loading systems for single pieces.
NC Full digital axis
Interpolated linear axis
Interpolated rotating axis
Longitudinal X axis
Transversal Y axis
Vertical Z axis
Working table length
A axis
C axis
Length of clamp support table
1,400 mm / 1,800 mm
Unlimited
+/- 180°
A axis
C axis
70 | JET.SERIES
CNC
CUTTING
CONVENTIONAL
CNC
CUTTING
CONVENTIONAL
5
3
2
2,600 / 3,400 mm
1,300 mm
650 mm
2,600 mm
Unlimited
+/- 180°
JET.SERIES | 71
JET.L
technical data
JET
Info
ENHANCED ACCURACY
FOR ALUMINUM
AND COMPOSITES
Audi R8 resin model by Novem Car, Germany
72 |
| 73
HEAVY DUTY GANTRY FRAMES
WITH ENHANCED ACCURACY
5-AXIS CNC MACHINING CENTER
Operating unit T1D with 20HP spindle liquid cooled
H = constant
Radio Probe for piece inspection
H = constant
Z ball
block
Z ball
block
H
H
Probe for diameter and tool
lenght presetting
The c/c distance between the spindle and the Z ball
blocks is always constant. Constant rigidity on the
spindle nose for different Z working height
Outstanding features:
Maximum precision on the spindle nose thanks to a heavy duty MONOLITHIC structure
technical data
MASTER.ADVANCED is an extremely rigid and accurate 5-axis CNC machining center ideal for machining wood, plastic, resins, composite materials,
and also aluminum in high speed finishing.
Spindle and table configurations can be customized
based on specific requests and applications.
Interpolated axIs
Longitudinal X axis
Transversal Y axis
Vertical Z axis
B Axis
C Axis
Certified accuracy: Laser calibration by STAMIMUC to enhance precision
5
3.600 mm or more
2.600 mm or more
1,300 mm or 1,500 mm
270°
400° (optional unlimited)
Stanimuc official calibration for
enhanced and certified accuracy.
74 | ADVANCED.SERIES
MASTER.ADVANCED
Info
Linear and rotative encoders to compensate all possible positioning errors
Automatic axes recalibration
20HP liquid cooled spindle equipped with high rigidity frame
Numerical control by FANUC or SIEMENS
| 75
ALL IN ONE SOFTWARE:
EASILY CONTROL
YOUR CNC MACHINE
PITAGORA.SOFTWARE
76 |
| 77
PARAMETRIC
PROGRAMMING
Software
ALL IN ONE SOFTWARE:
EASILY CONTROL YOUR
CNC MACHINE
AUTOMATIC “PATH-FINDER”, allowing the automatic identification of the
best possible tool movements in terms of the time required between one
operation and the next one, thereby avoiding possible collisions.
MULTI REFERENCE ORIGINS. With PITAGORA it’s possible to use an infinite
number of relative origins in order to refer or to offset the single parametric
operation with the most convenient reference point.
PARAMETRIC PROGRAMMING of EACH SINGLE OPERATION to create
bores, mortises, tenons, and finger joints. This feature is called MMO (Modular Machining Operations).
NEW PARAMETRIC PROGRAMMING OF LINKED MULTIPLE OPERATIONS.
Not only is the single operation parametric, but now it’s possible to parameterize and link multiple operations. The modification of one parameter will
modify also all the other linked operations.
Cycle Time
NO MORE
STOP&GO *
What makes PITAGORA unique is the exclusive MSP (Machine Status Prediction) function used to generate NC programs. The MSP
system allows you to eliminate stand-by time
(“stop & go” movements), decelerations, and
synchronizations. *When utilized, this can create a considerable reduction of cycle times well
over 50% compared to the programming performed with conventional CAD / CAM systems.
PITAGORA has many features that help the programmer minimize the programming time. Here some of them:
100%
other Cad Cam
50%
3D SIMULATION:
NO MORE ERRORS!
USER-FRIENDLY
INTERFACE
The 3D simulation includes all the main machine
elements: the machine itself, its clamping devices, and the parts models. Correct programming is verified by a 3D simulation of all machine
movements and an effective display of all tool
paths involved in the machining process. These
features ensure complete advance control of all
collision risks.
Learn the software features with only a few days
of training!
Up to 78%* reduction of the programming time
and the cycle is automatically optimized!
*Comparative studies have shown that even a nonexpert programmer can produce a piece-program
using PITAGORA in less than 15 minutes; with other software the program generation process takes
well over 90 minutes, and still does not achieve the
same level of optimization that is automatically attained with PITAGORA.
OPTIMIZATION
OF OLD AND NEW
PROGRAMS
PITAGORA is equipped with a complete series of CAD tools to program 4- and 5-axis
machining and may also be interfaced with
the most commonly used CAD/CAM systems, directly importing machining programs,
3D models of pieces, tools, and clamps. In
this way, old programs may be reused and
optimized, thus capitalizing on the PITAGORA advantage by reducing cycle times.
78 | SOFTWARE
| 79
80 |
| 81
BAND SAWS FOR
SHAPED AND THIN CUTS
Parquet Curv8 by Bole Floor, Estonia
82 |
| 83
A NEW AND INNOVATIVE CONCEPT
TO MAKE PANELS NESTING!
CNC BAND SAW WITH ROUTER UNIT
3 axes router spindle with exhaust hood
+/-90°
Rotating blade-holder guides
Multiple drilling unit
Outstanding features:
Higher yield compared with 3-axis router solutions
thanks to the thin band saw blade cut
Nesting Layout with conventional 3 axes router
(lower yield)
Clamping system by back clamps allows for stacking
multiple boards for higher daily output
Easy unloading of cut parts while machine is working
technical data
The CNC MASTER.CUT machining center combines the advantages of a band saw with the flexibility
of CNC 3-axis routers. This machining center can be
equipped with multiple head boring units.
The operating fields of the two units (saw + router) allow machining and cutting of the entire panel or multiple stacked panels.
C axis blade rotation
±90°
2.500 mm / 3.100 mm (optional)
Cutting length
1.550 mm / 2.200 mm (optional)
Loading depth
Cutting depth
750 mm
0 ÷ 150 mm
Cutting height
Minimum cutting radius
80 mm
84 | CUTTING.DIVISION
CNC
CUTTING
Easy production of small pieces
MASTER.CUT
Info
CONVENTIONAL
No energy consumption for vacuum clamping
Nesting layout with CNC band saw (higher yield)
CNC
CUTTING
CONVENTIONAL
CUTTING.DIVISION | 85
CNC BAND SAW
CNC BAND SAW
Independent automatic roller feeders for timber board feeding
DUPLEX.CNC numerically controlled automatic vertical band saw.
A true numerically controlled machining center for
straight and shaped cuts. Wooden boards may be
optimized with different cuts in sequence based on
the type of wood, the size, and the defects.
Cutting length
Loading depth
Cutting height
Cutting angle
Minimum radius
1.300 mm ÷ 2.000 mm (optional)
1.000 mm
150 mm
± 90°
80 mm
CNC
CUTTING
CONVENTIONAL
Info
technical data
ATLANTIS is a CNC band saw cutting center
equipped with 3 interpolated axes (X, Y, C) to create curved cuts on pieces of any size. The loading
system through pneumatic clamps allows multiple
stacked panels up to 150mm in height.
C axis blade rotation
±90°
Cutting length
0 ÷ 1.500 / 2.500 mm
Loading depth
1.350 mm / 1.500 mm
Cutting depth
750 mm
0 ÷ 150 mm
Cutting height
Minimum cutting radius
80 mm
CNC
CUTTING
CONVENTIONAL
CUTTING.DIVISION | 87
ATLANTIS
technical data
DUPLEX.CNC
Info
86 | CUTTING.DIVISION
Pneumatic clamps allow to stack
panels up to 150 mm height
Manual feeding with pneumatic clamps
PRECISION THIN CUTTING BAND SAW
FLEXIBILITY, PRECISION, AND
HIGH PRODUCTIVITY IN A SINGLE MACHINE
HORIZONTAL BAND SAW FOR WIDE CUT
Outstanding features:
Wide cutting width of up to 600 mm
Possibility to cut from the top and the bottom*
Oversized flywheels (900 mm) with counter bearings
Automatic servo hydraulic tensioning of the blade
Steel blade holder guides to keep the
maximum precision during the cutting.
Feed speed of up to 20m/min
Supporting table made by conveyor belt
(creates less friction with the piece)
Oversized flywheels with counter bearings
technical data
STREAM.ELITE is an automatic horizontal band
saw to cut parquet lamellas, elements for packaging,
matchboard, and laminated veneer. Operating management of STREAM.ELITE by means of a touch
screen panel that is easily programmable by the operator.
Maximum cutting width 400 mm (600mm optional)
Minimum piece length
400 mm
Maximum cutting height 100 mm / 200 mm optional
Piece height
5 – 150mm
Main motor
18.5 KW / 30 KW optional
Blade tensioning
Automatic servo-hydraulic
Blade width
54 mm (62 mm optional)
Conveyor forward feed Inverter controlled
88 | CUTTING.DIVISION
CNC
CUTTING
STREAM.ELITE
Info
CONVENTIONAL
*Continuous cutting of blocks of different heights (without
stopping the machine)
| 89
JET
AUTOMATIC HORIZONTAL BAND SAW
CALIBRATING MACHINE
Circular saw blade for piece calibration with
vacuum feeding belt.
2 JET machines in lines with automatic feeding system
technical data
Info
90 | CUTTING.DIVISION
technical data
Max. machinable section
Min. cutting length
Max. cutting width
Max. cutting height
Cutting speed
Main motor
CNC
300 x 300 mm
450 mm
300 mm
100 mm
0 ÷ 20m/min
18 Hp
CUTTING
JET
JET is the BACCI CUTTING DIVISION solution for
parquet lamellas, elements for packaging, matchboard, laminated veneer, synthetic materials, and insulator materials.
CONVENTIONAL
PLANER is an automatic calibrating machine for precision machining. Thanks to the circular saw blade’s
teeth, the cutting is overlap in width and length with
the following advantages: highest precision without
marks, high regular surface, perfectly machined in
knobby areas, stronger glue joint since the machine
doesn’t deform the cell structure and pores are open.
The fast and easy tool changing make the productivity of the machine even better.
CNC
CUTTING
CONVENTIONAL
Maximum cutting width 300-50mm (400mm as opt.)
Max/Min working length
Infinite-350mm
Max/Min working depth
1-0,1mm
Main motor
5,5 KW
Working speed
From 0 to 20m/min
Belt with vacuum system
Feeding system
PLANER
Info
CUTTING.DIVISION | 91
92 |
| 93
THE EVEGREENS.
CONVENTIONAL BACCI
MACHINES FROM OUR
BEGINNINGS
CONVENTIONAL.MACHINES
Wishbone chair by Carl Hansen, Denmark
94 |
| 95
CUTTING-BORING-MOULDING MACHINE
ROUNDING OFF TENONING MACHINE
Info
Info
The TSG.2T rounding off tenoning machine with two
tables can produce rounded tenons with any possible
angle, including vertical tenons.
The TTF1 cutting-boring-moulding machine is characterized by the hydraulic control of the table stroke,
circular saw, boring machine, and milling machine.
The PLC equipped with the machine allows for any
cutting, boring, and moulding sequence.
technical data
technical data
Cutting-off unit
Widia circular saw blade
400 mm
Boring unit
Multi-spindle adjustable boring head 360°
Boring depth
80 mm
Milling unit
Shaft Ø
Max tool length
35 mm
160x120 mm
DOUBLE ROUNDING TENONING MACHINE
Info
TSD.CSF2 is a double rounding tenoning machine
with an automatic loading system that is equipped
with 2 opposite operating heads that can simultaneously tenon both ends of the piece, with any possible
angle. TSD.CSF2 is a very fast machine able to produce up to 900 pieces per hour.
technical data
96 | CONVENTIONAL
1.200 / 2.200 mm
150 mm
100 + 2R mm
40 mm
10 mm
25 mm
TSD.CSF2
Max. piece length
Min. piece length
Max. tenon length
Max. tenon depth
Min. tenon depth
Max. tenon thickness
CNC
CUTTING
CONVENTIONAL
| 97
TTF1
115 + 2R
10 ÷ 45 mm
0 ÷ 42 mm
0 ÷ 15°
0 ÷ 30°
0 ÷ 20°
TSG.2T
Max. tenon width
Min. tenon depth
Min. tenon thickness
Table upwards tilt angle
Table downwards tilt angle
Table sideways tilt angle
MORTISING MACHINE
MORTISING MACHINE
Info
Info
Oscillating mortising machine with horizontal and vertical units, the model MX90 executes all the slots
and holes, no matter the inclination between them,
in the legs of chairs, armchairs, sofas, and furniture
parts, in a single machining cycle. Machine equipped
with inverter for automatic variation of the spindle rotating speed. Automatic hopper feeder system available as an option.
MOD automatic oscillating mortising machine with
2 tables.
The mortising machine performs bores and slots in an
automatic cycle. Its very rigid frame made entirely of
cast iron with over-sized spindle and high oscillation
frequency allows a perfect quality of the mortises.
technical data
technical data
Spindle RPM
6.000 / 12.000
Length of oscillating strokes 100 mm or more
Max. bit Ø
30 mm
Standard clamp hole Ø
16 mm
Max. n. of horizontal spindles
6
4
Max. n. of vertical spindles
MORTISING MACHINE
MORTISING MACHINE
Info
Info
Multiple spindle oscillating mortising machine with
horizontal units, the model MX-H is built for boring
and mortising long elements with or without an automatic hopper feeder.
MOA automatic oscillating mortising machine with
1 table.
The mortising machine performs bores and slots in an
automatic cycle. Its very rigid frame made entirely of
cast iron with over-sized spindle and high oscillation
frequency allows a perfect quality of the mortises.
technical data
MOA
98 | CONVENTIONAL
120 mm
80 mm
20°
16 mm
50 mm
100 mm
CNC
CUTTING
CONVENTIONAL
CNC
CUTTING
CONVENTIONAL
CONVENTIONAL | 99
MX-H
Spindle revolutions / 1’
6.000 / 12.000
Length of oscillating strokes 100 mm or more
Max. bit Ø
30 mm
Standard clamp hole Ø
16 mm
Max. n. of horizontal spindles
2 to 14
technical data
Max. range of oscillation
Max. bore depth
Max. table inclination
Tool coupling Ø
Max tool Ø
Vertical table adjustment
MX90
120 mm
80 mm
20°
16 mm
50 mm
100 mm
MOD
Max. range of oscillation
Max. bore depth
Max. table inclination
Tool coupling Ø
Max tool Ø
Vertical table adjustment
COPYING SHAPING-SANDING MACHINES
Info
The copying shaping-sanding machines execute milling and sanding operations on components of chairs,
tables, armchairs, sofas, beds, furniture and frames,
guaranteeing maximum finishing quality and high productivity.
technical data
2.500 or more
180 mm (optional 210/250mm)
Max. working width with rounded ends
Max. table feeding speed
Max. table return speed
500 mm
350 mm
0 ÷ 15 m/min
100 m/min
FC 2-4-6-8
Max. table length
Max. working height
Max. working width
NC SHAPING-SANDING MACHINES
Info
The numerically controlled shaping-sanding machines
with 4, 6, 8, or 10 heads execute milling and sanding
operations controlled by a new-generation, fully digital, numerically controlled system. These machines
deliver twice the production of traditional machines
as well as exceptional finishing of machined pieces.
They feature an extremely easy machine set-up and a
user-friendly, Windows-based programming system.
technical data
100 | CONVENTIONAL
FC 4-6-8-10 CNC
2.500 or more
180 mm / 250 mm
500 mm
Max. working width with rounded ends
350 mm
Max. table feeding speed
0 ÷ 30 m/min
Max. table return speed
100 m/min
Max. table length
Max. working height
Max. working width
CNC
CUTTING
CONVENTIONAL
| 101
COPYING LATHE
102 | CONVENTIONAL
Spindle inter-axis distance
Maximum lathing length
Milling machine standard motor power
170
1.250 mm
11 KW
Sanding unit
4
180 mm
80 mm
Belts
Belt height
Contact roller Ø
CNC
CUTTING
CONVENTIONAL
Info
technical data
The T4MO.250 copying lathe with 4 horizontal
spindles reproduces wood elements by copying the
shape from a three-dimensional template, to machine
elements for chairs, furniture, rifle stocks, oars, tool
handles, anatomic sandals, hangers, sports equipment, and musical instruments.
Spindle inter-axis distance
Maximum lathing length
CNC
CUTTING
CONVENTIONAL
Milling machine standard motor power
250
1.250 mm
11 KW
Sanding unit
Belts
Belt height
Contact roller Ø
T4MO.250
The T4MO.170 copying lathe with 4 horizontal
spindles reproduces wood elements by copying the
shape from a three-dimensional template, to machine
elements for chairs, furniture, rifle stocks, oars, tool
handles, anatomic sandals, hangers, sports equipment, and musical instruments.
technical data
T4MO.170
Info
COPYING LATHE
4
180 mm
80 mm
CONVENTIONAL | 103
BACCI COMPANY IN 1950
104 |
| 105
BACCI COMPANY TODAY
106 |
incomparable technology
www.bacci.com
| 107
INCOMPARABLE TECHNOLOGY
1704 East Blvd. - Suite 101
Charlotte, NC
28203 USA
Tel: +1 704 375 5044
[email protected]
www.bacciamerica.com
Zhong Xing XI Rd.
Dalingshan Town
Dongguan City
China
Tel: +86 13829137842
[email protected]
www.baccichina.com
Via Palermo, 26
56021 Cascina (Pisa)
Italy
Tel:+39 050 703695
[email protected]
108 |