cartridge - Load Data

Transcription

cartridge - Load Data
CARTRIDGE
243 Winchester Super Short Magnum-95/100 grain Version 8.0
243 WSSM - 95/100 grain
6mm (.243")
MAXIMUM S.A.A.M.I. O.A.C.L. 2.360"
TESTED O.A.C.L.
B.C.
S.D.
Ballistic Tip®
CT® Ballistic Silvertip®
Partition®
Partition®
95gr. Spitzer
95gr. Spitzer
95gr. Spitzer
100gr. Spitzer
2.260"
2.260"
2.260"
2.260"
0.379
0.379
0.365
0.384
0.230
0.230
0.230
0.242
CASE TYPE:
CASE HOLDS:
Winchester
49.5 Gr. WATER
PRIMER TYPE
BARREL Length/Make
BARREL Twist
WLR
24" Wiseman
1-10"
POWDER CHG.
GRS.
MUZZLE VEL.
F.P.S.
LOAD DENSITY
(VOLUME)
POWDER
TYPE
Varget
36.5
MAX. 3007
34.5
2889
2775
32.5 *
80%
75%
71%
RL15
37.0
MAX. 3010
35.0
2919
33.0 *
2796
78%
74%
69%
H4831SC
44.5
MAX. 3065
42.5 *
2966
40.5
2877
94%
89%
85%
IMR 4831
44.0
MAX. 3131
42.0
3003
40.0 *
2896
95%
90%
86%
H414
42.5 * MAX. 3132
40.5
3019
38.5
2908
89%
85%
81%
W760
43.0
MAX. 3143
3031
41.0 *
39.0
2907
91%
87%
83%
H4350
42.0 * MAX. 3148
40.0
3048
38.0
2940
90%
86%
81%
IMR 4350
44.0
MAX. 3177
42.0
3032
2914
40.0 *
94%
90%
86%
Viht N165
50.0
MAX. 3222
48.0 *
3126
46.0
2984
Most Accurate
Powder Tested
A ll cartridge measurements are SA A M I maximum and due to variatio ns fro m manufacturers actual measurements may vary
“ B ecause No sler, Inc. has no co ntro l o ver the actual co mpo nents selected, the manner in which they are assembled o r the
co nditio n o f the firearm used, no respo nsibility, either expressed o r implied is assumed fo r the use o f this data.
In no event shall No sler, Inc. be liable fo r any damages resulting fro m the use o f this data.”
* = Most accurate load tested
** = Compressed load
**
**
**
**
**
**
112%
108%
103%

Similar documents

CARTRIDGE

CARTRIDGE Due to internal construction differences, always begin with starting loads when using E-Tip® products.

More information

CARTRIDGE

CARTRIDGE PRIMER TYPE BARREL Length/Make BARREL Twist

More information

CARTRIDGE

CARTRIDGE MAXIMUM S.A.A.M.I. O.A.C.L. 2.360"

More information

CARTRIDGE

CARTRIDGE Due to internal construction differences, always begin with starting loads when using E-Tip® products.

More information