Total Metals LLC - Berridge Manufacturing Co.

BERRIDGE MANUFACTURING COMPANY
Volume 17 no. 2 - Fall 2004
Featured Licensee:
Kirtley Sheet Metal
Featured Licensee: Kirtley Sheet Metal
Architect’s
View: Ken Anderson & Associates
Architect’s
View:
Ken Anderson & Associates
Total Metals LLC:
THE
INSIDE
STOR
Y
STORY
Jack Berridge
Chairman
of the Board
A Total Commitment to
Customer Satisfaction
through Excellence in
Metal Craftsmanship
Total Metals, the Berridge Licensee featured in this
issue of BYLINE, typifies the new generation of
specialized contractors who excel in their field and
offer exceptional value and craftsmanship. As their
name implies, they only work in metal and their
work exemplifies the best performance and aesthetic properties of today’s prefinished metal materials. As the the products pictured in this BYLINE dramatically illustrate, Total Metal has set a
very high standard in the eight years they’ve been
in business.
Durrant Architects, featured in the “Architect’s View”
section, have been in business since 1933 and
now have twelve branch offices and more than 330
employees nationwide. The Copper Basin YMCA
project featured in this issue typifies the professionalism Durrant brings to Community Planning
and design work.
Jack. A. Berridge
Chairman of the Board
the Berridge BYLINE
BERRIDGE MANUFACTURING COMPANY
1720 Maury Street, Houston, TX 77026 /1-800-231-8127 Fax 713-236-9422
EDITORIAL POLICY
News Releases, photographs and manuscripts regarding the application of Berridge products are requested and should be submitted to the Editor, Berridge BYLINE, and will be returned only if so requested in advance.
Editor: David J. Doyle, Vice President, Marketing
Left to Right: David Brackney, President; Byron Capp, VP Sales & Marketing & Senior
Estimator; Pat Brackney, Estimator
T
otal Metals was established in 1998 as a sheet metal company, and from the beginning has been a Berridge Licensee. As the company name indicates, Total Metals is
totally dedicated to the fabrication and installation of metal cladding products for the construction industry. The scope of work
performed by Total Metals includes standing seam metal roofing,
wall panels, soffiting, fascia, coping cap, leaders, downspout,
gutter and specialty custom sheet metal items. The company has
established a reputation for its excellent craftsmanship of specialty items such as copper domes at a casino near Tucson, as
well as aluminum composite panels and components fabricated
from zinc, copper, aluminum and stainless steel.
Over the past four years, Total Metals’ sales have more than
doubled, largely through the sale of Berridge standing seam and
other metal panels. Today, Total Metals has fifty employees and
occupies a twenty-five thousand square foot facility equipped with
complete sheet metal fabricating machinery. The average job size
fabricated and installed by Total Metals has more than quadrupled
over the past five years.
David Brackney, Total Metals President, credits the company’s
strong reputation for excellent customer service and quality for
the growth in sales: “90% of our business is from repeat custom-
1
ers; We are on our 30th project with
some of them... I believe this reflects
our commitment to customer service
and satisfaction!”
Photo Captions:
1. Byron Capp (Center) and David
Brackney (Right) receive a Berridge
“Customer of Distinction” award for
2005 from Ken Cole, Berridge Sales
Representative.
“90% of our business is from repeat customers; We are on our
30th project with some of them... I
believe this reflects our commitment to customer service and satisfaction!”
2. Design & Detailing Team:
L-R: Woody Napier, Detailer; Jim
Wilkinson, Director of Project
Management & Engineering; and
Ismael Fuyivara, Detailer.
David Brackney, President
Both David Brackney and Byron
Capp, Vice President of Sales &
Marketing credit the unique Berridge
site-forming program with their high
level of customer satisfaction;
“Whenever possible we get the
customer’s color selection early so
we can order our Berridge coil material and have it on hand. That way,
when the roof is ready for panels,
we’re ready!”
2
3. Sheet Metal Fabrication &
Installation: (L-R): Anthony Porter;
Richard Clements; Filimon Navarette,
Field Operations Manager; Jim Bucalo,
Shop Manager; Nathan Bibb; Manuel
Romo and Francisco Gonzalez.
4. Administrative Team: (L-R): Ashley
Robinson; Cathy Schanze; and Julie
Fisher.
3
Total Metals LLC
“Whenever possible we get the
customer’s color selection early
so we can order our Berridge coil
material and have it on hand. That
way, when the roof is ready for
panels, we’re ready!”
Byron Capp, Vice-President, Sales &
Marketing
Left:
The cover of this issue features
personnel, equipment and
outstanding projects by Total
Metals, LLC
4
Top & Top Left:
ARIOSO CITY LOFTS
Phoenix, AZ
General Contractor:
Architect :
Berridge Licensee:
Berridge Products:
SNK Construction, Inc., Phoenix
Todd Associates, Inc., Phoenix
Total Metals, LLC
Berridge Curved High Seam Tee-Panel
Standing Seam Roof panels
Color Finish: Zinc Grey (Kynar 500)
Upper Left:
ARIZONA STATE SAVINGS & CREDIT UNION
Phoenix, AZ
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products:
Jokake Construction Co., Phoenix
Architectural Design Group, Tucson
Total Metals LLC
Berridge Curved Tee-panel Standing Seam
Color Finish: Royal Blue Kynar 500
Berridge FW-12 Soffit Panels
Color Finish: Zinc Cote Kynar 500
Lower Left: GRAND CANYON UNIVERSITY STUDENT UNION
Phoenix, AZ
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products:
Remcon-Westra Construction, Phoenix
Architects & Planners Int’l, Inc., Phoenix
Total Metals LLC
Berridge Cee-Lock Standing Seam
Color Finish: Medium Bronze Kynar 500
Bottom Left: GRAND CANYON UNIVERSITY STUDENT HOUSING
Phoenix, AZ
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products:
Allan Ray Photography.com
Remcon-Westra Construction, Phoenix
Architects & Planners Int’l, Inc., Phoenix
Total Metals LLC
Berridge Cee-Lock Standing Seam
Color Finish: Medium Bronze Kynar 500
Allan Ray Photography.com
Top & Top Right: ALBERTSON’S & ALBERTSON’S EXPRESS
Chandler, AZ
General Contractor:
Architect :
Berridge Licensee:
Berridge Products:
MT Builders, LLC, Scottsdale
Luckett & Farley, Phoenix
Total Metals, LLC
Berridge Curved Tee-Panel
Copper Cote Kynar 500
Upper Right: RED LOBSTER RESTAURANT
Chandler, AZ
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products:
Schwabe Construction Corp, Mesa, AZ
J Thomas Chandler
Total Metals LLC
Berridge Cee-Lock Standing Seam Roof
Satin Finish Galvalume
Lower Right: FRY’S FOOD & DRUG
Florence, AZ
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products:
Summit Builders, Phoenix
Saemisch DiBella Architects, Mesa
Total Metals LLC
Berridge Cee-Lock Standing Seam Roof
Finish: Hemlock Green Kynar 500
Bottom Right: JACK-IN-THE-BOX RESTAURANT
Phoenix, AZ
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products:
Henes Construction, Inc., Mesa
Jeff Looker Architect, Inc., Tempe
Total Metals LLC
Berridge Tee-Panel Standing Seam Roof
Finish: Deep Red Kynar 500
VIEW
A R C H I T E C T’ S
The DURRANT Copper Basin YMCA Design Team:
Left to Right: Frank Roberts, Principal, Director of Business Development; Evan
Sockalosky, Designer; Michael Hudson, Designer; and Scott A. Bohning, AIA, Managing
Principal.
D
urrant’s Phoenix, Arizona, office has been
serving Arizona and the Southwest since
1980. The firm’s main market sectors are
criminal justice, commercial, education, governmental, health care and industrial. These areas of
specialty set the stage for the types of projects now
served by the Durrant-Phoenix office and its professional staff providing architectural and engineering services.
The Copper Basin YMCA project typifies the community planning design approach offered to its clients by Durrant; “...it was to be the anchor for the
surrounding Copper Basin residential community.”
noted Evan Sockalosky who, with Mike Hudson
headed the design team on the project. As shown
in the “Main Street” rendering in the photo above,
the YMCA is located on the Copper Basin main thoroughfare, adjacent to the elementary school. Typi-
cal YMCA amenities such as the pool, Fitness Facility, Aerobics Center and DayCare/Childcare facility make it a natural community gathering place
for Copper Basin residents.
In their decision to use Berridge metal panels,
Evan Sockalosky says “We used the Berridge corrugated S-Deck and Cee-Lock Standing Seam
Roof in unfinished natural Galvalume because we
wanted to tie back to the agricultural and rural environment of the surrounding area.” As the photos on the facing page show, the final result is both
functional and aesthetic.
COPPER BASIN YMCA
Queen Creek, Arizona
Architect:
General Contractor:
Berridge Licensee:
Berridge Products:
DURRANT ®
Reliance Build, Inc., Chandler, AZ
Total Metals, LLC
Berridge Cee-Lock Standing Seam Roof
Berridge S-Deck Siding
Berridge FW-12 Soffit
Berridge “Satin Finish Galvalume”
The single slope roof areas were clad with Berridge CeeLock Standing Seam roof panels, formed in continuous
panel lengths up to 71’-4” and applied over four inch thick
nail base insulation and steel decking.
Berridge S-Deck corrugated panels were applied
horizonally below the eave overhangs, and Berridge FW12 Soffit Panels were used under canopies.
Top & Right : REGIONAL AIRLINE ACADEMY (CIMARRON)
Mesa, AZ
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products:
Himovitz Properties, Inc., Scottsdale
Rockwood Architecture, Phoenix
Total Metals LLC
Berridge Curved S-Deck Roof panels
Finish: Teal Green Kynar 500
Bottom Right: CIMARRON XV-B
Mesa, AZ
Himovitz Construction Co., Scottsdale, AZ
Rockwood Architecture, Phoenix, AZ
Total Metals LLC
Berridge Cee-Lock Standing Seam Roof
Finish: Royal Blue Kynar 500
Berridge Vee & Vented Vee-Panels (Hangar
Doors & Soffit); Royal Blue & Parchment
PROJECT ARCHTS
SPEC WRITER
DESIGN DEPARTMENT
ROUTE:
PLEASE R
OUTE:
www.berridge.com
1720 Maury St.
Houston, Texas 77026
800-231-8127 / www.berridge.com
BERRIDGE
MANUF
ACTURING
MANUFACTURING
COMPANY
COMP
ANY
PRESORTED
STANDARD
U.S. POSTAGE
PAID
HOUSTON,
TEXAS
PERMIT NO. 3399
General Contractor:
Architect - Engineer:
Berridge Licensee:
Berridge Products: