Huebsch - Alliance Laundry Systems

Transcription

Huebsch - Alliance Laundry Systems
Huebsch
120 & 170 lb.
On-Premises
Drying Tumblers
Serving the Laundry Industry For Over 90 Years
Performance & Efficiency
The name Huebsch is synonymous with top
performing drying tumblers. By balancing air
flow and heat input, Huebsch is able to deliver
fast drying without wasting energy. Our fast
drying will save you hours of extra work time
and our superior energy efficiency will give
your utility budget a break as well.
Construction
Because on-premises laundries
don’t have time to deal with the
hassles of maintenance and
down time, Huebsch drying
tumblers deliver reliable
performance and much more.
Innovative energy-saving features provide a more economical way to get the job done.
With so many user-friendly
& Features
Huebsch 120 lb. and 170
lb. tumblers feature an all
belt drive system with
self adjusting tension idler.
The drive system is constructed with cast iron
pulleys and permanently
sealed bearings for super
quiet operation and low
maintenance.
Huebsch also understands
that the installation of
these large machines is
sometimes difficult, that’s why we’ve designed the
burner/heater assembly to be easily removable.
When tops are removed the heights are reduced
to 70” (120 lb) and 75” (170 lb).
features like a simple push-tostart button, Huebsch is an
easy choice for your laundry
facility.
The large size of our loading
door makes loading and
unloading a breeze for your
operators.The all-metal construction of our doors and
hinges are designed to
stand-up to the toughest
laundry environment.
C.A.R.E. System*
TM
(Combustion Auto Response Equipped)
Our C.A.R.E. drying tumblers provide
some peace of mind in the unlikely
event of a laundry fire within the cylinder.This feature senses for an abnormally
high temperature within the cylinder of
the dryer. If a laundry fire should start
within the cylinder, water is sprayed on
the linens from a multi-port manifold to
saturate the load. If the system is activated, a warning
signal can be sent to a remote location.The externally
mounted C.A.R.E. system features multiple sensors and
two water valves to assure accurate performance.
Putting You in Control
Because different businesses have different
requirements, Huebsch offers a variety of controls
to meet your needs.
Our microprocessor control is state of the art.
Computerized models feature four preset automatic
drying cycles with an option to further customize
four additional automatic drying cycles. A fifth setting
(no heat) is also available for items requiring
special care.
*Option available on 120 & 170 lb models.
Huebsch tumblers feature a self-cleaning lint screen of
fine mesh, which cleans continually. Lint is deposited into
an extra large storage area for
easy removal.This helps maintain maximum air flow and
promotes fast, efficient drying.
Additional Features
•Galvanized steel cylinder
•Integrated motor overload protection
•Instant electric ignition reduces drying
time and saves energy
•Separate motors for fan and basket
•Reversing cylinder standard
•Automatic back draft damper
•Stainless steel cylinder (optional)
•Stainless steel front (optional)
•Optional lower/rear venting capability
allows for simple replacement
of older competitive models. (120 lb only)
Our manual dual timer control models allow
operators to easily set both drying time (0-60
minutes), and cool down time (0-15 minutes) as
well as temperature (120°–190° F).
Unmatched Warranty
At Huebsch, we’re so confident that our quality
drying tumblers are built to last, we offer a
THREE year warranty* on the entire machine.
Normal Vent
Optional Vent
*Parts only, labor
not included.
See Huebsch
Warranty Bond
for specifics.
On-Premises Drying Tumblers Specifications
120 lb
Width (in/mm)
46.5” (1181 mm)
Depth (in/mm)
65” (1651 mm)
Roughing-in Dimensions
170 lb
53.12” (1349 mm)
66.12” (1679 mm)
Height (in/mm) 85.5” (2172 mm)
94” (2388 mm)
Cylinder Depth
(in/mm)
41” (1041 mm)
42.5” (1080 mm)
Cylinder Diam.
(in/mm)
44” (1118 mm)
50.75” (1289 mm)
Cylinder Vol.
36.1 cu. ft. (1022 liters)
49.7 cu. ft. (1408 liters)
Door Opening
(in/mm)
27” (686 mm)
27” (686 mm)
Dry Capacity
Filling Ratios
120 lb (54.4 kg)
170 lb (77.1 kg)
Airflow (CFM)
1600 (755 liters/sec.)
2450 (1156 liters/sec.)
Water Inlet Size
(C.A.R.E. System)
Energy Data
and Electrical
Specifications
(1) 3/4” Hose Connection
(1) 3/4” Hose Connection
Gas Model
300,000 Btu/hr
(75,600 kcal/hr)
200-208/240/60/3
380/400-415/50/3
460-480/60/3
Gas Model
395,000 Btu/hr
(99,540 kcal/hr)
200-208/240/60/3
380/400-415/50/3
460-480/60/3
F G
D
E
B
Amps
6.7
4.7
3.8
Amps
12.6
7.2
6.5
Steam Model
Amps
11.7 BHP @ 100 psi (6.9 bar)
405,000 Btu/hr (118.5 kW)
7.9 BHP @ 15 psi (1.0 bar)
272,000 Btu/hr (79.7 kW)
200-208/240/60/3
6.7
380/400-415/50/3
4.7
460-480/60/3
3.8
Steam Model
Amps
18.8 BHP @ 100 psi (6.9 bar)
648,500 Btu/hr (189.7 kW)
12.6 BHP @ 15 psi (1.0 bar)
433,000 Btu/hr (126.9 kW)
200-208/240/60/3
12.7
380/400-415/50/3
7.3
460-480/60/3
6.6
Plumbing
Connections
(in)
3/4” - NPT
1” - NPT
Net Weight
Gas - 1275 lb (578 kg)
Steam - 1375 lb (624 kg)
Gas - 1575 lb (714 kg)
Steam - 1675 lb (760 kg)
Shipping Wt.
(Domestic)
Gas - 1338 lb (607 kg)
Steam - 1446 lb (656 kg)
Gas - 1667 lb (756 kg)
Steam - 1776 lb (806 kg)
Shipping
Dimensions
(Domestic)
(in/mm)
Width - 48.5”(1232 mm)
Depth - 72”(1829 mm)
Height - 90” (2286 mm)
Width - 58”(1473 mm)
Depth - 74.5” (1892 mm)
Height - 99” (2515 mm)
Agency
Approvals
Gas Model - CSA Star,
CSA Flame, cCSAus, CE,
Australia Gas
Steam Model - cCSAus, CE
Gas Model - CSA Star,
CSA Flame, cCSAus, CE,
Australia Gas
Steam Model - cCSAus, CE
Tumbler models are made to suit a variety of electrical service characteristics. See your
Huebsch distributor for specifications. For further details on installation refer to Installation,
Operation and Maintenance instructions supplied with the tumbler. Due to continuous product improvements, design and specifications subject to change without notice. Gas models
are certified by CSA International.The quality management systems at all Alliance Laundry
Systems facilities have been awarded ISO 9001 certification.
©Copyright 2003 Alliance Laundry Systems LLC
AH03-214
Side View
H
A
C
Rear View
Dimension
120 lb
170 lb
A - Height (in/mm)
85.5” (2172)
94” (2388)
B - Depth (in/mm)
65” (1651)
66.12” (1679)
C - Width (in/mm)
46.5” (1181)
53.12” (1349)
D - Door Opening (in/mm)
31.5” (800)
31.5” (800)
E - Door Clearance (in/mm)
31.31” (785)
33.31” (846)
F - Exhaust Height (in/mm)
63.5” (1613)
42.37” (1076)
G - Height (top removed)
(in/mm)
70” (1778)
75” (1905)
H - Exhaust Vent (in/mm)
10” (254)
12” (305)
Alliance Laundry Systems Shepard Street, Ripon,WI 54971 Telephone: 1-800-553-5120