Spare part list

Transcription

Spare part list

SPARE PARTS
SKIOLD
FEED MILLING
PROGRAMME
ONLY ORIGINAL SPARE PARTS ARE ALLOWED
IF MORE THAN ONE PIECE OF A PART IS NEEDED IN THE MACHINE, THE
NECESSARY QUANTITY IS INDICATED BY THE FIGURE IN BRACKETS AFTER THE
DESCRIPTION
PLEASE NOTE THAT MANY OF THE OLD PARTS ARE NOT OBTAINABLE TODAY.
May 2013/PR/AB
CONTENTS
HAMMER MILLS DM-2 AND BM-2 .................................................................. 4
HAMMER MILLS TYPE DM-3, CM-3 AND BM-3 ................................................. 7
HAMMER MILL 3S ..................................................................................... 12
HAMMER MILL BM-5 ................................................................................. 14
MAIZE MILL CM-3-500 .............................................................................. 16
MAIZE MILL CM-4-750 .............................................................................. 18
MAIZE MILL BM-5-1000 ............................................................................ 20
GRAVITY MILL ST4 ................................................................................... 22
HAMMER MILL KM-1 ................................................................................. 24
HAMMER MILL RVO ................................................................................... 26
RVO-G .................................................................................................... 28
RVO-M .................................................................................................... 31
HAMMER MILL DM6 .................................................................................. 32
DM6-G .................................................................................................... 33
DM6-M .................................................................................................... 35
DISC MILL SK2500 AND SK5000, NEW TYPE ................................................ 37
DISC MILL SK2500 AND SK5000, OLD TYPE ................................................ 42
DISC MILL SK2500 AND SK5000 ................................................................ 46
Changing old model (up to approx. April 2005) from automatic to manual
regulation (drawing 269016): .................................................................... 46
Changing old model (up to approx. April 2005) from manual to automatic
DISC MILL SK2500 AND SK5000 ................................................................ 48
Changing new model (from approx. April 2005) from automatic to manual
Changing new model (from approx. April 2005) from manual to automatic
DISC MILL SK10T ..................................................................................... 50
STRUCTURE MILL SM2000 ......................................................................... 56
STRUCTURE MILL SM4000 ......................................................................... 59
CRUSHER KB80 ........................................................................................ 61
GRAIN CRUSHERS KB160/2 AND KB160/3................................................... 62
GRAIN CRUSHERS KB200/2 AND KB200/3 – OLD MODEL .............................. 68
GRAIN CRUSHERS KB300/3 – OLD MODEL .................................................. 69
GRAIN CRUSHER KB200/3 AND KB300/3 – NEW MODEL ............................... 72
GRAIN CRUSHER KB100 ............................................................................ 76
GRAIN CRUSHER KB150 ............................................................................ 78
PRE-CRUSHER ......................................................................................... 80
VERTICAL MIXER LAMIX ............................................................................ 81
DIAGONAL MIXER UNI-MIX 500 ................................................................. 83
DIAGONAL MIXER UNI-MIX 1000, OLD MODEL ............................................. 85
DIAGONAL MIXER UNI-MIX 1500 GM .......................................................... 89
HORIZONTAL MIXER H-1000 ..................................................................... 90
PRE-BIN FOR HORIZONTAL MIXER TYPE 3 ................................................... 98
POST-BIN FOR HORIZONTAL MIXER TYPE 3 ................................................100
BOOSTER FAN DME .................................................................................101
May 2013/PR/AB
2
BOOSTER FAN, OLD TYPE (SQUARE)..........................................................102
MOLASSES PUMP TYPE 590046 .................................................................103
FAT PUMP TYPE 590081 ...........................................................................104
SLUICE VALVE Ø 150 MM .........................................................................105
TWO-WAY VALVE ....................................................................................106
TWO-WAY VALVE – Throttle Motor .............................................................107
TWO-WAY VALVE –Switches .....................................................................108
FLEX AUGERS, OLD MODEL WITH ORANGE TUBES ......................................109
FLEX AUGER, CURRENT MODEL WITH BLUE PIPES .......................................119
PIPE AUGER 102 AND 152 MM (NEW MODEL) .............................................124
PIPE AUGER 102 MM (OLD MODEL) ...........................................................128
PIPE AUGER 152 MM (OLD MODEL) ...........................................................129
TROUGH AUGERS (OLD MODEL)................................................................137
MILLMIX UNIT COMPACT (UNI-MIX mixer 500 and hammer mill 2S) ..............141
PICCOLO MILLING/MIXING PLANT .............................................................145
TOMAL PROPORTIONER, OLD MODEL (taken out of production) ....................148
TOMAL PROPORTIONER, VERY OLD MODEL (taken out of production) ............148
TOMIX FINE PROPORTIONER TYPE 2/63 .....................................................150
TOMIX PROPORTIONER TYPE 40/1300 .......................................................150
TOMIX PROPORTIONER TYPE 125/2000 .....................................................151
TOMIX PLANT – FAT MIXER ......................................................................153
SKIOLD FEEDTRONIC ..............................................................................155
BELT WEIGHER TYPE 2000 .......................................................................156
TOMIX PROPORTIONER TYPE INDUSTRY 2/63 .............................................159
TOMIX PROPORTIONER TYPE INDUSTRY 40/1300........................................161
TOMIX PROPORTIONER TYPE INDUSTRY 125/2000 ......................................163
TOMIX PROPORTIONER TYPE INDUSTRY 250/4500 ......................................165
SCREEN CLEANER – drawing 209032 .........................................................168
SCREEN CLEANER – drawing 209033 .........................................................169
STRAW CUTTER TYPE BM, 7.5 KW .............................................................170
STRAW CUTTER TYPE CM, 11 KW ..............................................................172
STRAW FINE CUTTER TYPE CM, 11 KW.......................................................174
STRAW CUTTER TYPE JIK TURBO ..............................................................176
STRAW SHREDDER TYPE JIK CLEAN ..........................................................179
DUST SEPARATOR TYPE SP1000 ...............................................................183
STRAW SHREDDER TYPE JIK WIND............................................................184
SCREEN CLEANER, OLD MODEL.................................................................188
SCREEN CLEANER, NEW MODEL ................................................................191
BUCKET ELEVATOR ..................................................................................193
CHAIN CONVEYOR ...................................................................................209
COMPUTERS ...........................................................................................227
May 2013/PR/AB
3
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILLS DM-2 AND BM-2
3
4
5
6
7
8
9
10
12
13
14
18
19
20
21
22
211000
6004008
6000922
6001169
213008
6000445
6001171
210017
210016
210136
210137
211031
210009
210129
210008
210130
210007
210148
210096
210149
210006
210147
210055
210056
210057
211151
6000454
6001172
211121
6000474
211124
183009
211150
183004
211005
6302006
221170
210019
200111
6000446
6001171
216114
6000474
6001169
May 2013/PR/AB
Mill housing
Allen screw M12x45 MK for motor (4)
Nut M12 (4)
Spring washer M12 (4)
Blind plate
Set screw M8x12 (4) DM-2
Spring washer M8 (4) DM-2
2-winged fan
4-winged fan
PROF-LINE 2-winged fan
Grinding chamber
Screen 3.0 mm, T=2 mm
Grinding bridge with screws
Set screw M10x16 (12)
Rotor complete BM-2/DM-2 (old No. 211003)
Bolt 12x80 – necessary when placing a
DM-2 rotor in a BM-2 hammer mill
Hammers set Hardox 500 complete with bolts,
screws and distance rings
Set hammers Hardox 500
Set hammer bolts with screws
Distance ring (12)
Mill cover, old model
Handwheel for mill cover (4)
Mill cover, present model
Suction inlet 80 mm, old model
Suction inlet conical 80 mm, present model
Set screw M8x15 (4)
Spring washer 8 mm (4)
Tension disc DM-2
Bolt for motor shaft M12x80 DM-2
Spring washer 12 mm
4
SPARE PARTS LIST
POS.
ITEM NO.
24
214002
211147
211148
6302006
216012
214010
211152
211153
211154
211022
211030
6004005
6205063
May 2013/PR/AB
DESCRIPTION
Reinforcement liner
PROF-LINE reinforcement liner, upper, with bolts
PROF-LINE reinforcement liner, lower, with bolts
Hand wheel for front plate (4)
Parallel key for rotor and fan BM-2
Distance ring (1 pc. 1 mm + 2 pcs. 2 mm)
Reinforcement complete with bolts
Tightening for grinding chamber
Tightening for cover
By pass flange
Set of 4 wings
Bolt M8x20 for set of wings (8)
Pin M8x20 for set of wings (8)
5
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing for hammer mills DM-2 and BM-2
May 2013/PR/AB
6
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILLS TYPE DM-3, CM-3 AND BM-3
3
7
8
9
10
12
13
14
18
19
221069
221081
221144
7004504
220017
220015
220143
220144
221065
221066
221064
221063
6004005
6205061
221072
211153
220010
220009
220160
220008
220161
220007
220196
220131
220197
220006
220195
221158
6000454
6001172
221121
221003
221124
221142
221157
183004
211005
211154
6302006
221170
221170
6000446
6001171
220024
200100
May 2013/PR/AB
Mill housing for reinforcement
Mill housing without reinforcement
PROF-LINE mill housing for reinforcement
Tightening 4x8 mm between stand and housing, per m
4-winged fan
8-winged fan
Fan with loose wings, 4-winged
Fan with loose wings, 8-winged
4 loose wings
8 loose wings
Screw for loose wings (8-16)
Split for loose wings (8-16)
Grinding chamber
Tightening for grinding chamber
Rotor complete DM-3 (old No. 221143)
Rotor complete BM-3 / CM-3
Hammers set Hardox 500 complete with bolts,
screws and distance rings
Set hammers Hardox 500
Set hammer bolts with screws
Distance ring (16)
Mill cover, old model
Tightening for cover
Handwheel for mill cover (4)
Mill cover for conical suction, yellow, present model
Mill cover for conical suction, for PROF-LINE,
present model (old No. 221164)
Set screw M8x16 (4)
Suction inlet 100 mm, old model
Suction inlet conical 100 mm, present model
7
SPARE PARTS LIST
POS.
ITEM NO.
21
22
24
25
26
27
28
33
224007
226147
6000716
6000724
6001173
221071
221005
221137
221138
221074
221161
211152
6000920
6001171
6000445
6001171
213008
143011
224019
6004010
6001173
6000923
220036
May 2013/PR/AB
DESCRIPTION
Tension washer BM-3/CM-3
Tension washer DM-3
Bolt for motor shaft M16x50 CM-3
Bolt for motor shaft M16x60 DM-3
Spring washer 16 mm
Reinforcement liner for mill
housing 221069 and 221081
Reinforcement liner for old mill housing 221000
PROF-LINE reinforcement liner, upper, with bolts
PROF-LINE reinforcement liner, lower, with bolts
Wearing plate CM-3/DM-3
Wearing plate DM-3 PROF-LINE
Reinforcement behind wearing plate DM-3 PROF-LINE
Nut M8 (8) CM-3/DM-3
Spring washer M8 (8) CM-3/DM-3
Set screw M8x12 (4)
Blind plate
Parallel key for rotor and fan
Set of distance rings for mounting between rotor and
fan (1 pc. 1 mm + 2 pcs. 2 mm)
Bolt for mounting of motor (4)
Washer for above (4)
Nut for above (4)
Bypass suction 80 mm
8
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing hammer mills DM-3, BM-3 and CM-3
May 2013/PR/AB
9
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILLS TYPE DM-4
1
3
3.1
3.2
4
5
6
7
7.1
7.2
7.3
221170
231011
234001
6004177
231085
231086
231087
231089
183004
183003
231093
7.4
7.5
8
10
235114
6004003
231090
231086
230011
230010
230009
230056
230057
230058
230059
230060
May 2013/PR/AB
Mill cover
Grinding chamber
Grinding bridge
Screw for grinding bridge (3)
Mill housing
Protection cover, set (upper/lower)
Main frame
Rotor complete
Distance ring for hammers (12)
Hammers set Hardox 500 complete with bolts, screws
and distance rings
Hammer bolt (4)
Screw for hammer bolt (4)
Fan
Protection cover, set (upper/lower)
Screen, 2.0 mm
Screen, 2.5 mm
Screen, 3.0 mm
Screen, 3.5 mm
Screen, 4.0 mm
Screen, 4.5 mm
Screen, 5.0 mm
Screen, 6.0 mm
10
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing hammer mills DM-4
May 2013/PR/AB
11
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILL 3S
1
271109
271122
Motor bracket 11-18.5 kW
Motor bracket 5.5-7.5 kW
2
270058
270059
270060
270110
270123
270104
270093
Screens (1 set = 3 pcs.):
2.5 mm, T = 2 mm
3.0 mm, T = 3 mm
3.5 mm, T = 3 mm
4.0 mm, T = 4 mm
4.5 mm, T = 4 mm
5.0 mm, T = 5 mm
6.0 mm, T = 5 mm
3
19
20
22
23
271068
271069
271100
201094
201093
271147
271146
271099
271098
6004003
271107
271120
591177
271105
6000479
6000468
226147
216114
6000455
6004010
6004008
6002005
6000455
6001173
6001169
6000923
6000922
6001016
6000464
591179
591181
24
25+27
26
271129
1820028
271126
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
May 2013/PR/AB
4-winged rotor 11-18.5 kW
2-winged rotor 5.5-7.5 kW
4-winged rotor 5.5-7.5 kW
Hammer set (24 pcs.) for 271068
Hammer set (16 pcs.) for 271069
Hammer set complete for 271068
Hammer set complete for 271069
Hammer bolt set (4 pcs.) for 271068
Hammer bolt set (2 pcs.) for 271069
Allen screw M6x10 (4 or 2)
Grinding chamber
Mounting plate
Filter connection (2)
Set grinding bridges with screws
Set screw M16x40 for 11-18.5 kW
Set screw M12x40 for 5.5-7.5 kW
Washer Ø 60 mm 11-18.5 kW
Washer Ø 50 mm 5.5-7.5 kW
Allen screw M16x50MK 11-18.5 kW for motor (8)
Allen screw M12x45MK 5.5-7.5 kW for motor (4)
Washer 10 mm (8)
Spring washer 16 mm 11-18.5 kW for motor (8)
Spring washer 12 mm 5.5-7.5 kW for motor (4)
Nut M16 11-18.5 kW for motor (8)
Nut M12 5.5-7.5 kW for motor (4)
Lock nut M12 (2)
Filter stand
Legs (4)
Suction pipe Ø 120 mm:
Ø 150 mm suction cone
Ø 150 mm clip
Ø 150/Ø 120 mm 90° suction bend
12
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
28
271130
271123
24
25+27
26
28
271114
1820026
1810067G
271117
271077
24
25+27
26
28
271111
686029
681044
271113
271118
Ø 120 mm suction pipe for diagonal mixer
Ø 120 mm suction pipe for mill hopper
Ø 100 mm clip
Ø 100 mm 90° suction bend
Rubber joint
90° bend
29
30
31
32
271138
7004246
6002006
591183
Protection cover (3)
Filter bag (12 m) (old No. 7004242)
Distance ring (16 or 12)
Clip (6)
Spare Parts Drawing Hammer Mill Type 3S
May 2013/PR/AB
13
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILL BM-5
1
2
2.1
2.2
3
3.1
3.2
3.3
3.4
4
5
5.1
6
6.2
7
8
9
11
12
13
16
17
18
22
23
24
25
26
50
251000B
251001G
251006
251007
6000456
6002005
251004
250061
251201
6004003
254002
251005B
250015
250070
6000446
6001171
251019G
6000455
6001172
251204
251066
251018
6004013
6206050
251203G
6000447
6001171
254021
6000447
254023
6001073
6000455
6001172
250015
251013
230002
6004011
6001173
6000923
6000693
6001167
250047
250055
250001
250003
250004
May 2013/PR/AB
Main frame
Mill housing
Upper protection liner
Lower protection liner
Set screw M10x25 for protection liner (8)
Washer M10 for protection liner (8)
Rotor complete
and distance rings
Hammer bolt (4)
Allen screw M6x10 (4)
Front cover for TOMIX
Inlet for front cover for TOMIX
Bypass inlet for TOMIX
Set screw M8x16 for bypass inlet (4)
Spring washer M8 for bypass inlet (4)
Grinding chamber
Bolt M10x20 for grinding chamber (12)
Washer M10 for grinding chamber (12)
Disc fan complete with 8 wings
Wings (set of 8 pcs.)
Screw M10x30 for wing (16)
Split for wing (16)
Wearing plate
Set screw M8x20 (5)
Blind plate
Set screw M8x20 for blind plate (4)
Head for nave
Top nut M12 for front cover (4)
Conical suction inlet 120 mm
Front cover for feeding device
Feeding device
Screw M16x60 (8)
Washer (8)
Nut (8)
Steel bolt M20x160
Spring washer M20
Screen 0.7 mm, T = 2 mm
14
SPARE PARTS LIST
POS.
ITEM NO.
250060
250073
250071
250072
250074
250021
250022
250023
250024
250025
250026
211006
2340096
2700053
DESCRIPTION
Screen extractor
Flange motor 37 kW 2800 rpm
Key for 37 kW motor
Spare parts drawing hammer mill BM-5
May 2013/PR/AB
15
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
MAIZE MILL CM-3-500
3
4
5
7
9
10
11
12
13
14
15
17
21
22
23
24
26
27
28
30
31
32
33
39
40
41
42
221069
6406027
6406053
224019
220060
221003
221080
221075
6004003
221055
226038
226061
6001173
201036
183004
221158
6000454
6001172
221072
6004005
6205063
221048
221040
221074
6000920
6001171
213008
6000445
6001171
6801027
220042
6000466
6000922
6001169
7004045
235113
May 2013/PR/AB
Mill housing
Lock nut KM-13
Lock washer MB-13
Distance ring
Screens 6 – 8 – 10 - 12 – 14 – 16 mm
Rotor complete
Set of hammers
Hammer bolt (4)
Precutter complete
Precutter, short
Precutter, long
Spring washer 16 mm
Hopper complete
Distance ring (12)
Grinding chamber
Set screw M8x20 (8)
Spiral split 8x20 mm (8)
Set of wings (4)
Special fan, 4 wings
Wearing plate
Nut M8 (8)
Blind plate
Set screw M8x12 (4)
Gearbox for PTO 540 rpm
3-point suspension
Nut M12 (8)
Protection guard
Distance ring between rotor and fan
16
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing maize mill CM-3-500
May 2013/PR/AB
17
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
MAIZE MILL CM-4-750
5
8
9
12
17
20
22
23
6801025
231001
231061
231064
231041
231082
231068
26
27.1
27.2
231073
6004004
231067
233004
231057
27.3
27.4
30
31
32
37
42
183003
183004
231055
6004003
231070
201036
6302012
May 2013/PR/AB
Gearbox for PTO 1080 rpm
Support
Mill housing
4-winged fan CM-4
4-winged fan BM-4
Set of fan wings (8)
Grinding chamber
Screens 6 – 8 – 10 – 12 – 14 – 16 mm
Grinding bridge
Allen screw M8x16 for grinding bridge (3)
Rotor complete
Set of hammers (10)
Set of pendular hammers
Do. with 2 hammer bolts and screws
Distance ring 9.5 mm (6)
Distance ring 6.0 mm (4)
Hammer bolt (4)
Precutter complete
Hopper
Ball handle
18
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing maize mill CM-4-750
May 2013/PR/AB
19
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
MAIZE MILL BM-5-1000
1
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
31
33
34
35
251000B
254021G
251067G
6004011
6000923
6001173
251007
251006
251070
251019G
6001172
6000455
251204
250021
250022
250023
250024
250025
250026
251074
251075
251073
254002
251201
6004003
251055
253014
253017
6001167
6000737
251091
6000922
250044
251043
7004012
6801025
May 2013/PR/AB
Support
Blind plate
Mill housing
Nut M16 (8)
Wearing plate, lower
Wearing plate, upper
Fan
Grinding chamber
Screen 6.0 mm
Screen 8.0 mm
Screen 10.0 mm
Screen 12.0 mm
Screen 14.0 mm
Screen 16.0 mm
Rotor
Set of hammers
Set of pendulum hammers for 251075
Distance tube (12)
Hammer bolt (4)
Precutter complete
Precutter, short
Precutter, long
Spring washer 20 mm
Steel bolt M20x200 galv.
Hopper
Nut M12 (4)
Outlet mill to 190 mm
3-point suspension with bolts
Protection guard
Gearbox 1080 rpm/2800
20
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing maize mill BM-5-1000
May 2013/PR/AB
21
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
GRAVITY MILL ST4
2
3
4
5
8
9
15
16
17
34
29
30
35
141026
141027
141059
145121
141025
6004003
141068
276079G
6000437
6001174
141070
141069
140073
140074
140075
Rotor complete for 4 kW
Rotor complete for 5.5-7.5 kW
Set of hammers (18 pcs.)
Set of distance rings
Hammer bolts (4)
Allen screw M6x10 MK for hammer bolts (4)
Grinding bridge
Blind plate
Screw M6x16 (4)
Disc M6 (4)
Cover
Adjustment and closing throttle
Screen 3.0 mm
Screen 3.5 mm
Screen 4.0 mm
140040
140050
100018
140037
Framework
Wall bracket
Hopper
Bracket with magnet
May 2013/PR/AB
22
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing gravity mill ST4
May 2013/PR/AB
23
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILL KM-1
1
3
5
6
7
8
14
15
24
28
29
271046
271047
211031
271048
271049
271057
211073
276092
100018
271055G
276109G
210013
210012
210011
210010
210009
210008
210007
210096
210006
270045G
May 2013/PR/AB
Cover 3-4 kW
Cover 5.5-7.5 kW
Grinding chamber
Rotor 3-4 kW
Rotor 5.5-7.5 kW
Set of hammers
Hammer bolt (4)
Distance ring (12)
Hopper
Grate for hopper
Hinge bolt
Screen 1.0 mm
Screen 1.5 mm
Screen 2.0 mm
Screen 2.5 mm
Screen 3.0 mm
Screen 3.5 mm
Screen 4.0 mm
Screen 4.5 mm
Screen 5.0 mm
Set of magnet (extra outfit)
24
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing hammer mill KM-1
May 2013/PR/AB
25
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILL RVO
1
2
2
280070
251204
281093
3
281053
4
5
285107
216219
281091
251019G
May 2013/PR/AB
Screen (see spare parts list) (1)
Grinding bridge RVO-G with three bolts (1)
Grinding bridge RVO-M with three bolts (1)
and distance rings
Hammers Hardox 500 (set with 40 pcs.)
(old No. 121041 (1)
Hammer bolt (4)
Lock plate for hammer bolt (4)
Scraper wing, set (only RVO-M) (1) (old No. 285120)
Grinding chamber (only RVO-M) (1)
26
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing hammer mill RVO-G
May 2013/PR/AB
27
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
RVO-G
1
6.1
2340028
2340029
2340155
2340030
2340156
281027
281042
281028
281031
281032
281043
281037
281029
281093
6.2
6.4
6.5
6.6
7
8
10
17
22
23
24
30
30
30
30
30
30
30
30
30
30
30
30
30
30
281094
281087
281053
281048
281050
281051
281052
216219
285107
285108
6004003
281041
285125
6000479
6001173
6004025
6302007
6302012
280057
280058
280059
280060
280067
280068
280069
250003
250004
250060
250073
250071
250072
250074
2
3
4
5
6
May 2013/PR/AB
Motor 7.5 kW 2800 rpm (1)
Motor 11 kW 2800 rpm (1)
Motor 18.5 kW 2800 rpm (1)
Frame (1)
Mill housing for 7.5 kW (1)
Mill housing for 11-15-18.5-22 kW (1)
Cover with inlet (1)
Magnet plate (1)
Rotor complete 7.5 kW (1)
Rotor complete 11-15-18.5 kW (1)
Rotor complete 22 kW (1)
and distance rings (1)
Do. with 1 Widia corner (1)
Do. with 2 Widia corners (1)
Hammers (40 pcs.) Hardox 500 (old No. 121041) (1)
Do. (40 pcs.) with 1 Widia corner (1)
Do. (40 pcs.) with 2 Widia corners (1)
Hammer bolt (4)
Distance piece for hammers (36)
Screw M6x10 (4)
Grinding bridge (1)
Washer (1)
Screw M16x40 (1)
Screw M8x25 (3)
Hand wheel (1)
Handle, ball 32x8 mm (1)
Screen 2 # (1)
Screen 2.5 # (1)
Screen 3.15 # (1)
Screen 4 # (1)
Screen 2.5 #, tripartite (1)
Screen 3.15 #, tripartite (1)
Screen 4 #, tripartite (1)
Screen Ø 2 T=2 (1)
Screen Ø 2.5 T=2 (1)
Screen Ø 3 T=3 (1)
Screen Ø 4 T=4 (1)
Screen Ø 5 T=5 (1)
28
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
30
30
30
Screen Ø 6 T=5 (1)
Screen Ø 8 T=5 (1)
Screen Ø 10 T=5 (1)
250021
250022
250023
May 2013/PR/AB
29
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing hammer mill RVO-M
May 2013/PR/AB
30
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
RVO-M
1
2
3
4
5
6
6.1
2340029
2340155
2340030
251019G
281027
281033
281036
281037
281093
6.2
6.4
6.5
6.6
7.1
7.2
8
10
17
30
30
30
30
30
30
30
30
30
30
30
30
30
30
281094
281087
281053
281048
281050
281051
281052
216219
285107
285108
6004003
281040
281091
285125
6000489
6001173
280057
280058
280059
280060
250003
250004
250060
250073
250071
250072
250074
250021
250022
250023
May 2013/PR/AB
Motor 18.5 kW 2800 rpm (1)
Grinding chamber complete (1)
Frame (1)
Mill house for 11-15-18.5 kW (1)
and distance rings (1)
Do. with 1 Widia corner (1)
Do. with 2 Widia corners (1)
Hammers (40 pcs.) Hardox 500 (old No. 121041) (1)
Hammer bolt (4)
Distance piece for hammers (36)
Screw M6x10 (4)
Plate for scraper wing (1)
Scraper, set (1) (old No. 285120)
Washer (1)
Screw M16x80 (1)
Screen 2 # (1)
Screen 2.5 # (1)
Screen 3.15 # (1)
Screen 4 # (1)
Screen Ø 2
T=2 (1)
Screen Ø 3
T=3 (1)
Screen Ø 4
T=4 (1)
Screen Ø 5
T=5 (1)
Screen Ø 6
T=5 (1)
Screen Ø 8
T=5 (1)
31
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HAMMER MILL DM6
1
2
2
3
281081
281081
281092
3
281093
4
5
285107
216219
281091
251019G
May 2013/PR/AB
Screen (see spare parts list) (1)
Grinding bridge DM6-G/M (three-piece screen) (3)
Grinding bridge DM6-G/M (standard screen) (1)
and distance rings for DM6-G, 28 pcs. (1)
and distance rings for DM6-M, 40 pcs. (1)
Hammer bolt (4)
Scraper wing, set (only DM6-M) (1) (old No. 285120)
Grinding chamber (only DM6-M) (1)
32
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DM6-G
May 2013/PR/AB
33
SPARE PARTS LIST
POS.
ITEM NO.
1
2
3
4
5
6
6.1
2340028
2340029
2340155
2340030
2340156
281065
281077
281064
281067
281071
281079
281074
281075
281092
281086
281093
7
8
9
10
11
12
13
14
281081
281081
226147
285223
285224
281066
6302010
6004025
280057
280058
280059
280060
280067
280068
280069
250010
250011
250012
250013
250071
250072
250074
250021
250022
250023
250006
250007
250008
250009
May 2013/PR/AB
DESCRIPTION
Motor 7.5 kW 2800 rpm (1)
Motor 18.5 kW 2800 rpm (1)
Frame (1)
Mill housing for 7.5 kW (1)
Mill housing for 11-15-18.5-22 kW (1)
Magnet plate (1)
Rotor complete 7.5 kW (1)
Rotor complete 22 kW (1)
and distance rings for DM6-G, 28 pcs. (1)
Hammers set with 2 Widia plates complete with bolts,
screws and distance rings for DM6-G, 28 pcs. (1)
and distance rings for DM6-M, 40 pcs. (1)
Grinding bridge (three-piece screen) (3)
Grinding bridge (standard screen) (1)
Washer (1)
Frame (1)
Window for magnet (1)
Side guard (2)
Handle Ø35 (2)
Screw M8 x 25 (9)
Screen 2 # (1)
Screen 2.5 # (1)
Screen 3.15 # (1)
Screen 4 # (1)
Screen 2.5 #, three-piece (1)
Screen 3.15 #, three-piece (1)
Screen 4 #, three-piece (1)
Screen Ø 2
T=2 (1)
Screen Ø 3
T=3 (1)
Screen Ø 4
T=4 (1)
Screen Ø 5
T=5 (1)
Screen Ø 6
T=5 (1)
Screen Ø 8
T=5 (1)
Screen Ø 2, three-piece (3)
Screen Ø 2.5, three-piece (3)
34
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DM6-M
May 2013/PR/AB
35
SPARE PARTS LIST
POS.
ITEM NO.
1
2
3
4
5
6
6.1
7.1
7.2
8
9
10
11
12
2340029
2340155
2340030
251019G
281065
281033
281036
281037
281093
281040
281091
285125
6000489
6001173
281066
280057
280058
280059
280060
250010
250011
250012
250013
250071
250072
250074
250021
250022
250023
250006
250007
250008
250009
May 2013/PR/AB
DESCRIPTION
Motor 18.5 kW 2800 rpm (1)
Grinding chamber complete (1)
Frame (1)
Mill housing for 11-15-18.5 kW (1)
and distance rings for DM6-M, 40 pcs.) (1)
Scraper plate (1)
Scraper set (old No. 285120) (1)
Washer (1)
Screw M16x80 (1)
Side guard (2)
Screen 2 # (1)
Screen 2.5 # (1)
Screen 3.15 # (1)
Screen 4 # (1)
Screen Ø 2
T=2 (1)
Screen Ø 3
T=3 (1)
Screen Ø 4
T=4 (1)
Screen Ø 5
T=5 (1)
Screen Ø 6
T=5 (1)
Screen Ø 8
T=5 (1)
Screen Ø 2.5 three-piece (3)
36
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DISC MILL SK2500 AND SK5000, NEW TYPE
Manual Adjustment
May 2013/PR/AB
37
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Mill Housing, Rotating Parts and Servo
May 2013/PR/AB
38
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Adjustment
May 2013/PR/AB
39
SPARE PARTS LIST
POS.
ITEM NO.
Pos.
DESCRIPTION
Item No.
Item No.
Item No.
Item No.
SK2500
Man.
SK2500
Aut.
SK5000
Man.
SK5000
Aut.
Description
Manual Adjustment
10
23
24
266246
6205052
6302017
266246
6205052
6302017
Tightening handle (1)
Tension pin 4x24 (1)
Tightening handle (1)
Mill Housing, Rotating Parts and Servo
1
6000468
6001169
6000468
6001169
261050
261051
261050
261051
4
261175
224007
224007
6000716
6001173
6000716
6001173
261052
261053
261052
261053
261175
261082B
261083
261089
261114
7
8
261075B
261077
261075B
261077
9
261113
261113
261082B
261083
261089
261114
6004136
261182
6004136
261182
6004190
261183
6004190
261183
261109
261109
261110
261110
261101
261101
261104
261104
6004157
266201G
261186
261184
14+19 261100
6004157
266201G
261186
261184
261100
6004156
266228G
261185
6004156
266228G
261185
261103
261103
6004144
261179
6004144
261179
2700086
6403056
6408036
6408037
6408025
6408024
6802148
7003719
266252
266271
266399
2700086
6403056
6408036
6408037
6408025
6408024
6802148
7003719
6004144
261180
261181
6004144
261180
261181
266252
266272
266399
2700086
6403057
6408038
6408039
6408040
6408041
6802148
7003719
12
13
15
16
20
23
40
41
42
43
44
47
48
May 2013/PR/AB
2700086
6403057
6408038
6408039
6408040
6408041
6802148
7003719
40
Washer for centre (1)
Centre bolt M12x40 (1)
M12 washer for centre bolt (1)
Centre bolt M16x50 (1)
M16 washer for centre bolt (1)
Motor 5,5 kW 2800 rpm (1)
Motor 7,5 kW 2800 rpm (1)
Gear motor (1)
(old No. 2392085 + plug etc.)
Motor bracket (1)
Runner disc 5,5-7,5-15 kW (1)
Runner disc 22 kW (1)
Grinding ring, 3 step,
set with screws (2)
Bolt for grinding ring (8 / 12)
Thrower for runner plate
("cleaner") (1)
Inlet ring, hard metal-strengthen,
set with screws (1)
Inlet ring, old type, set with
screws (1)
Bolt for inlet ring (16 / 24)
Housing (1)
Liner for housing (1)
Cover, assembled (1)
Distributor iron, set with
screws and base (1)
Bolt for distributor iron (4)
PROF-LINE distributor iron, set (1)
PROF-LINE distributor plate (1)
Cogwheel 12 teeth (1)
Gear motor guard (1)
Potentiometer (1)
Lubricator nipple (1)
Bearing (1)
Oil seal (1)
Oil seal (1)
Locking ring (1)
Locking ring (3)
Angle (2)
Copper pipe (1)
SPARE PARTS LIST
POS.
ITEM NO.
Pos.
DESCRIPTION
Item No.
Item No.
Item No.
Item No.
SK2500
Man.
SK2500
Aut.
SK5000
Man.
SK5000
Aut.
1
261188
261188
261188
261188
2
3
5
6
8
261076G
261078
261135G
261148
261146B
261184
261076G
261078
261135G
261148
261147B
261184
261085G
261088
261136G
261156
261158B
261197
261085G
261088
261136G
261156
261158B
261197
266206G
266266
266306
266213
266263
266216
266253
266206G
266266
266306
266213
266263
266216
266253
266398
266400
266402
266389G
266474
266398
266400
266402
266389G
266474
266234
266241G
266254
266260
266261
266263
266287
266288
266289
266398
266400
266402
266406G
266470
266234
266241G
266254
266260
266261
266263
266287
266288
266289
266398
266400
266402
266406G
266470
266473
266473
266462
266462
33
7004627
7004627
7004627
7004627
36
53
62
66
6000435
6002025
6205052
6900336
261190
6000435
6002025
6205052
6900336
261190
6000435
6002025
6205052
6900336
261190
6000435
6002025
6205052
6900336
261190
Description
Adjustment
11
13
15
17
18
20
21
22
23
29
30
31
32
33
May 2013/PR/AB
41
Shaft with cogwheel (1)
(old No. 261079)
Inlet pipe (1)
Guide (3)
Insert (1)
Cogwheel (1)
Cover (1)
Cover, pre-assembled,
without wearing parts and
adjustment device
Adjustment ring (1)
Throttle f. inlet pipe (1)
Slide bearing (3)
Scale (1)
Compression spring (3)
Key 4x4x10 (1)
Toothed rim (1)
Gear wheel (1)
Adjustment ring (1)
Pin (1)
Distance disc (1)
Shaft (1)
Cover (1)
Fixed disc (1)
(old Nos. 266393/266409)
Wearing plate for fixed
disc (1)
Felt strip
(1.4 m for SK2500
2.1 m for SK5000)
Screw 6x10 (1)
Washer 6 mm (1)
Pin (1)
Slide bearing (4)
Cog wheel (repair set) (1)
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DISC MILL SK2500 AND SK5000, OLD TYPE
Drawing No. 269016:
10
266246
23
6205052
24
6302017
Tightening handle
Tension pin 4x24
Tightening handle
Drawing No. 269014:
1
224007
2
261050
261051
261052
261053
9
261077
261083
261089
10
261087
11
261113
261114
12
266201
266228
13
261101
261109
261104
261110
14
261100
261103
20
2700086
39
6403056
6403057
40
6408036
6408038
41
6408037
6408039
42
6408025
6408040
43
6408024
6408041
44
6802148
45
7003719
Washer SK5000
Motor 5.5 kW SK2500
Motor 7.5 kW SK2500
Motor 15 kW SK5000
Motor 22 kW SK5000
Runner disc 5.5-7.5 kW SK2500
Runner disc 15 kW SK5000
Runner disc 22 kW SK5000
Guard SK5000
Grinding unit, set with bolts SK2500 (2)
Housing SK2500
Housing SK5000
Inlet ring, set with bolts SK2500 (1)
Do. reinforced type (1)
Do. reinforced type (1)
Distributor iron, set with bolts SK2500
Distributor iron, set with bolts SK5000
Lubrication nipple
Bearing SK2500
Bearing SK5000
Oil seal SK2500
Oil seal SK5000
Oil seal SK2500
Oil seal SK5000
Locking ring SK2500
Locking ring SK5000
Locking ring SK2500 (3)
Locking ring SK5000 (3)
Angle (2)
Copper pipe
Drawing No. 269014 A:
4
2383127
Terminal block
5
261175
Gear motor cpl. (old No. 2392085 + plug, cable etc.)
6
2393065
Connection box SK2500/5000, old type
7
245056
No. plate for terminal block
15
266411B
Fittings f. potentiometer
16
266399
Potentiometer (old No. 266251)
17
266252
Gear wheel 12 tooth
May 2013/PR/AB
42
SPARE PARTS LIST
POS.
ITEM NO.
18
266271
266272
Drawing No. 269015:
1
261188
2
261076G
261085G
3
261102
261113
261105
261114
4
261081B
261158B
5
261078
261088
6
266222
7
266226
8
266202
266406G
9
266393
266470
266462
10
266227
266234
11
261101
261109
261104
261110
13
266206G
266241G
14
266243
15
266266
266254
16
266402
17
266218
266258
20
266213
266261
21
6001147
266262
22
266263
23
266216
266287
24
266253
266288
25
266289
26
2700086
34
6001007
50
6205052
51
6301058
May 2013/PR/AB
DESCRIPTION
Gear motor guard SK2500
Shaft with gear wheel (old No. 261079)
Inlet pipe SK2500
Inlet pipe SK5000
Do. new type (2)
Do. new type (2)
Cover SK2500
Cover SK5000 (old No. 261087B)
Guide SK2500 (3)
Guide SK5000 (3)
Locking disc
Distance pipe
Cover SK2500
Cover SK5000 (old No. 266232)
Fixed plate SK2500 (old No. 266207)
Fixed plate SK5000 (old No. 266233/266409)
Wearing plate for fixed plate SK5000
Adjustment ring SK2500
Do. reinforced type
Do. reinforced type
Throttle for inlet pipe SK2500
Throttle for inlet pipe SK5000
Pointer for scale
Plain bearing SK2500 (3)
Plain bearing SK5000 (3)
Shaft for gear wheel for scale (old No. 266257)
Gear wheel SK2500
Gear wheel SK5000
Compression spring SK2500 (3)
Compression spring SK5000 (3)
Disc SK2500 (3)
Disc SK5000 (3)
Key 4x4x10
Toothed rim SK2500
Toothed rim SK5000
Gear wheel SK2500
Gear wheel SK5000
Lubrication nipple
Lock nut M14
Washer pin 4x24
Locking ring 12 mm
43
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
52
53
54
56
57
59
6408032
6803068
6900336
816280
916498
7004627
Wave spring
Silencer
Plain bearing (4)
Spring (3)
Pressure spring
Felt strip (1.5 m)
7004101
1505266
Lock for magnet 260076 (2)
Window for magnet 260076
Spare parts drawing No. 269016
May 2013/PR/AB
44
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 269014 incl. 269014A
May 2013/PR/AB
45
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DISC MILL SK2500 AND SK5000
Changing old model (up to approx. April 2005) from
automatic to manual regulation (drawing 269016):
9
10
23
24
266268B
266245B
266246
6205052
6302017
6003315
Cover plate for guard SK2500
Cover plate for guard SK5000
Tightening handle
Tension pin 4x24
Tightening handle
Screw 4x8 (3)
Changing old model (up to approx. April 2005) from
manual to automatic regulation (drawing 269014):
4
5
6
7
15
16
17
18
2383127
261175
6000438
6001174
2393065
2383036
7004319
6003303
6002000
245056
6206078
266269B
266411B
266292
6000448
266399
266252
6004103
2700063
266271
266272
6000435
2381181
Terminal block
Gear motor (old No. 2392085 + plug, cable etc.)
Set screw M6x20 (3)
Mounting box
Screwed cable entry PG11 (2)
Nut PG11 (2)
Machine screw M3x6 (2)
Washer 4 mm (2)
No. plate for terminal block
Rivet 3.2x8
Fitting for potentiometer SK2500
Fitting for potentiometer SK5000 (old No. 266250B)
Distance ring
Set screw M8x25
Gear wheel 12 tooth
Disc spring 3x3.7
Set screw M6x10 (3)
Cable strip
2385273
2383215
2383328
For standard electric panel
Print
Potentiometer (x)
Plastic housing for potentiometer (x)
May 2013/PR/AB
46
SPARE PARTS LIST
POS.
ITEM NO.
1400621
1400622
1400623
May 2013/PR/AB
DESCRIPTION
For FlexMix
Controller for 5.5-7.5 kW
Controller for 15 kW
47
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DISC MILL SK2500 AND SK5000
Changing new model (from approx. April 2005) from
automatic to manual regulation (drawing 269016):
4
9
10
23
24
261146B
266268B
266245B
266246
6205052
6302017
6003315
266394B
Cover complete SK2500 (drawing 269015)
Cover plate (to the right) SK2500
Cover plate (to the right) SK5000
Tightening handle
Tension pin 4x24
Tightening handle
Screw 4x8 (3)
Cover plate (to the left)
Changing new model (from approx. April 2005) from
manual to automatic regulation (drawing 269014):
4
4
5
6
7
15
16
17
18
261147B
2393019
261175
6000438
6001174
266403
2383036
7004319
6003315
7004070
6206078
266405B
266411B
266292
6000448
266399
266252
266438
6004103
2700063
266271
266272
6000435
2381181
Cover SK2500 (drawing 269015)
Terminal block (old No. 2383016)
Gear motor (old No. 2392085 + plug, cable etc.)
Set screw M6x20 (3)
Mounting box
Screwed cable entry PG11 (4)
Nut PG11 (4)
Machine screw M4x8 (2)
No. list for terminal block
Rivet 3.2x8
Distance ring
Set screw M8x25
Gear wheel 12 teeth (old type)
Gear wheel 12 teeth (new type)
Disc spring 3x3.7
Set screw M6x10 (3)
Cable strip
2385273
2383215
For standard electric panel
Print
Potentiometer (x)
May 2013/PR/AB
48
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
2383328
Plastic housing for potentiometer (x)
1400621
1400622
1400623
For FlexMix
Controller for 5.5-7.5 kW
May 2013/PR/AB
49
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DISC MILL SK10T
1
2
3
4
261117
6004192
261152
6000734
261153
261154
6401032
6401035
May 2013/PR/AB
Grinding unit (2)
Allen screw 8x25 for grinding unit (24)
Inlet segment, set with two sets of screws (2)
Bolt for inlet segment, extra (32)
Distributor plate, set with screws (1)
Reinforcement liner, set with screws (1)
Refill for greasing device (1)
Battery set for refill (1)
50
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Cover SK10T
May 2013/PR/AB
51
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Cover SK10T
1
3
4
5
6+7
8
10
11
12
13
14
14
16
17
18+19
26
27
28
34
64
65
66
67
69
70
145147
2385056
261175
261151
261118
261120
266347
261152
266399
266252
266312A
7004627
266315
266316
266317
266331
266333
266336
2700063
6403062
6408042
6408043
6408044
6803068
6900336
May 2013/PR/AB
Tension disk (1)
Thermostat E21 85° (1)
Gear motor 24V (old No. 2392085) (1)
Grinding unit, set with screws (2)
Cogwheel f. scale (1)
Adjusting plate f. scale (1)
Contact box (old No. 261126) (1)
Inlet segment, set with two sets of screws (2)
Potentiometer (old No. 266251) (1)
Cogwheel f. gear motor (1)
Fixed plate (1)
Felt strip, 5x6x1000 (3)
Threaded bar M30x2 (3)
Nut M30x2 (3)
Spindle/gearwheel (1)
Scale (1)
Guide plate for toothed rim (1)
Guard (1)
Woodruff key 3x3.7 (1)
Bearing QJ209TVP (3)
Oil seal 30x40x7 (3)
Aeration (1)
Slide bearing 12-16x12.5 (4)
52
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Mill SK10T
May 2013/PR/AB
53
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Mill SK10T
1
261054
2
2
2
3
41
42
261132
2392091
2340140
261117
6004192
261152
261153
266310A
6000661
261203
261202
268002
268001
266332
6000216
266341
261154
6301078
6401029
6401032
6401035
6401031
6403061
43
44
45
46
47
54
55
56
268002
268001
6405054
6406028
6406055
6408046
6408068
7004627
7004698
7004740
6
9
10
11
13
14
16
39
40
40
May 2013/PR/AB
El-motor 55 kW, 2800 RPM B35 special motor
(old No. 2350000) (1)
Auger thread for feeding auger (1)
Worm gearing for feeding auger i=5 (1)
El-motor 0.75 kW, 2800 RPM B14 (1)
Grinding unit (2)
Set of screws for grinding unit (24)
Inlet segment, set each 16 pcs. with screws (2)
Distributor plate, set with screws (1)
Rotating disc (1)
Set of screws for rotating disc (6)
Hub for 55 kW (1) (old No. 266311)
Hub for 75 kW (1)
Repair kit with bearing, hub etc. for 55 kW (1)
Bearing cover (1)
Set of screws for bearing cover (8)
Tension disk (1)
Reinforcement liner, set with screws (1)
Seeger ring i150 (1)
Greasing set (1)
Greasing set refill (1)
Battery set for refill (1)
Attachment for greasing device (1)
Bearing QJ222N2MPA (1)
(do not forget pos. 46 when replacing bearing)
Split bushing (1)
Lock nut f. bearing (1)
Lock washer (1)
Oil seal 125x150x12 CRW1V (1)
O-ring 5x200 (1)
Felt 5x6x1000 (1)
Cap ø38 (4)
Cap 50x100 (4)
54
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Emptying Auger SK10T
1951016
2392094
2340158
1950025
266372
May 2013/PR/AB
Auger thread for emptying auger (1)
Worm gearing for emptying auger i=15 (1)
El-motor 1.5 kW, 1400 RPM B14 (1)
End plate with bearing and axle journal (1)
Axle journal for gear (1)
55
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRUCTURE MILL SM2000
1
2
6
8
10
12
14
16
18
20
34
48
54
58
62
64
68
70
80
82
88
90
94
96
98
100
102
104
112
114
116
122
241003
241007
241009
241010
241011
241012
241013
241014
241015
241065
241057
241016
241064
241058
245029
245213
245210
245033
245037
245040
245042
245044
245046
245048
245050
245053
916478
915375
2392060
2320066
6900323
6900324
6401074
6401075
6111075
266399
6301061
2520042
2520013
6003628
2384022
241009
245019
245016
May 2013/PR/AB
Guard over rollers
Arm
Shaft
Shaft with eccentric
Eye bolt for adjustment (2)
Bushing with form
Shaft pin with nab
Ball (2)
Structure roller, fixed, with 300 grooves
Structure roller, adjustable, with 300 grovoes
Structure roller, adjustable, with 250 grooves
Loose cover for roller with 300 grooves (2)
Lock plate (2)
Rail, lower and upper
Guide shaft for springs (2)
Shaft pin
V-belt pulley A-3-200 Ø40
V-belt pulley
Stopping and adjusting screw (2)
Rubber tightening
Pressure spring for bearing (2)
Bearing (4)
Spring
Spindle motor (only for aut.)
Motor 4 kW 1400 rpm
Slide bearing (4)
Slide bearing (2)
Ball bearing (2)
Ball bearing (2)
Disc spring (36)
Potentiometer (only for aut.)
Seger circlip (2)
V-belt SPA 1082 (3)
V-belt AA77 (2)
Eye bolt
Mill controller
Shaft for pulley pos. 62
Brackets for shaft for pulley pos. 62
Shaft for spindle motor
56
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing 249004, structure mill SM2000 AUTOMATIC
May 2013/PR/AB
57
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing 249005, structure mill SM2000 MANUAL
May 2013/PR/AB
58
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRUCTURE MILL SM4000
46
48
60
70
72
73
80
82
84
86
92
96
98
100
114
116
118
120
122
124
152
154
156
170
172
184
186
241073
241042
241074
241043
241072
241044
245207
245126
245120
916478
245138
6111075
245128
6000923
245053
241014
241013
6003326
2392060
6404025
6401028
6301051
6404025
6401028
6301051
6900323
6900326
6900325
266399
6004103
2520013
2530058
2320068
241049
2530060
2320069
241036
241040
6407012
241037
2384022
May 2013/PR/AB
Loose cover with 400 grooves
Loose cover with 300 grooves
Lock plate (2)
V-belt pulley A-125-4
Shaft
Bearing (2)
Bearing for fixed roller (2)
Disc spring (72)
Adjusting screw (2)
Nut (2)
Pressure spring for bearing (2)
Ball (2)
Shaft pin with nab
Machine screw
Spindle motor (only for aut.)
Bearing 6204 2RS1
Bearing 6005 2RS1
Circlip
Bearing 6204 2RS1
Bearing 6005 2RS1
Circlip
Slide bearing
Slide bearing
Slide bearing
Potentiometer (only for aut.)
Allen screw
V-belt AA-77 (4)
V-belt B-58 for 7.5 kW (4)
Motor 7.5 kW 1400 rpm
Magnet (2)
V-belt B-60 for 11 kW (4)
Motor 11 kW 1400 rpm
Distributor shaft
Guiding plate
Bearing (2)
Shaft with eccentric
Mill controller
59
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing, structure mill SM4000
May 2013/PR/AB
60
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
CRUSHER KB80
2
14
16
18
21
32
38
46
48
56
66
68
70
78
80
82
84
162
174
186
911120
911126
911127
911128
916471
911135
911138
916535
916536
916497
916501
813004
816203
2520002
6111075
6111075
6302013
6407071
2320063
6306061
911137
Crusher roller (2)
Bush with guide bolt (2)
Adjustment arm with eccentric
Set guide plate
Scraper (2)
Throttle
Feed arm incl. bearings (2)
Guide bush (2)
Pressure bush (2)
Adjustment arm
Rubber for angle
Pressure spring (4)
Spring for scraper
V-belt A62 (2)
Disc spring (28)
Disc spring (2)
Knob
Ball bearing GE 40 KRRB (2)
Electric motor 1.5 kW 1400 rpm
Vibration damper (3)
Wall bracket (1)
Spare parts drawing crusher KB80
May 2013/PR/AB
61
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
GRAIN CRUSHERS KB160/2 AND KB160/3
KB160/2 and KB160/3 - Hopper:
3
911186
Inlet
4
911185
Magnet tray complete
5
100018
Hopper
6
1800016
Clip Q16
12
7004767
Magnet (12)
KB160/2 and KB160/3 – Legs and protection guards:
1+2
911194
V-belt guards, set (old Nos. 911168 and 911167)
5
910070
Set long legs incl. vibration dampers
5
910071
Set short legs incl. vibration dampers
6
6306052
Vibration dampers (4)
15
916632B
Safety grate
16
1800016
Clip Q16
KB160/2 and KB160/3 – Belt drive:
2
911190B
Flat belt pulley (old No. 911156)
2430109
Taperlock for flat belt pulley
3
2420108
V-belt pulley SPA 280-3, Ø 40
3
2430081
Taperlock for belt pulley spa280-3
4
2540018
V-belt SPA-X 2057 (3)
5
2420091
V-belt pulley A71-3 Ø 28
6
2420075
V-belt pulley SPA 224-1
6
2430077
Taperlock for belt pulley SPA 224-1
7
2420117
V-belt pulley SPA 100-1
7
2430109
Taperlock for belt pulley SPA 100-1
8
2520121
V-belt AA51
9
911192
Turning roller complete
13
6404011
Bearing 6301 2RS for turning roller (2)
31
216046
Key 12x8x56 (2)
2320066
Electric motor 4 kW 1400 rpm B3
KB160/2 and KB160/3 – Rollers, bearings etc.:
1
916759
Roller (2) (old No. 911153)
2
916760
Pre-crusher roller (old No. 911154)
6
916651B
Guide plate
10
911173
Scraper, complete (2) (old No. 911159)
12
916664
Bearing housing (4-6)
6407068
Bearing for roller grae40krrb (4-6)
13
916666
Lock bushing (12-18)
14
911196
Adjustment arm
16
916658
Thread spindle
17
916643
Lock block with thread
18
916639
Lock block with freewheel
19
916575
Spring for scraper
21
6302029
Hand wheel
14+17+
May 2013/PR/AB
62
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
21+22+
23+26
911197
Lock handle complete
May 2013/PR/AB
63
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing KB160/2 and KB160/3 – Hopper
May 2013/PR/AB
64
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing KB160/2 and KB160/3 – Legs and protection
guards
May 2013/PR/AB
65
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing KB160/3 – Drive
May 2013/PR/AB
66
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing KB160/3 – Rollers, bearings etc.
May 2013/PR/AB
67
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
GRAIN CRUSHERS KB200/2 AND KB200/3 – OLD MODEL
1
6
9
100018
1800016
7004767
Hopper
Clip Q16
Magnet (old No. 7004761) (12)
2
3
4
13
14
15
17
18
20
22
23
25
26
27
32
33
916567
916568
916569
916578
911166
916577
916580
916699
916573
911161
911162
916572
916571
916570
916575
6407094
Roller, drive
Roller, driven
Pre-crusher roller KB200/3
Brace for adjustment of pre-crusher KB200/3
Lock bolt (2)
Brace for distance adjustment
Lock for handle (2)
Handle for distance adjustment (old No. 916579) (2)
Scraper (2)
Guard, left
Guard, right
Bearing housing, pre-crusher KB200/3 (2)
Bearing housing, adjustable (2)
Bearing housing, fixed (2)
Spring for scraper
Bearing for pre-crusher KB200/3 SA 206,
before June 2003 (2)
Bearing for pre-crusher KB200/3 GRAE 30 NPPB,
after June 2003 (2)
Bearing for main rollers SA 208, before June 2003 (4)
Bearing for main rollers, after June 2003 (4)
Turning roller, complete KB200/2
Turning roller, complete KB200/3
Spring for turning roller
V-belt AA58.5 (2)
V-belt AA66.5 (2)
V-belt SPA 1657 (3)
V-belt pulley, main drive SPA400x3 Ø 40
Taperlock 3020 Ø 40
V-belt pulley, double drive SPA200x2 Ø 40
V-belt pulley, pre-crusher SPA90x2 Ø 30
V-belt pulley A100-3 Ø 38 for motor
6404032
34
6407093
6407068
916574
916587
916576
2520125
2520126
2520106
2420006
2430067
2420008
2420010
48100003
May 2013/PR/AB
68
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
GRAIN CRUSHERS KB300/3 – OLD MODEL
1
2
6
9
100018
911165
1800016
7004767
Hopper
Inlet without regulation
Clip Q16
Magnet (old No. 7004761) (12)
2
3
4
911229
911228
911230
2420010
2430109
916588
911166
916589
916580
916699
916585
911163
911164
916591
916584
916604
916575
6407092
6407093
916587
916576
2520126
2520106
2420012
2420008
2420010
2420121
2430103
Roller, drive (old No. 916581)
Roller, driven (old No. 916582)
Pre-crusher roller (old No. 916583) +
V-belt pulley SPA90-2-1610 +
Taperlock 1610 Ø40
Brace for adjustment of pre-crusher
Lock bolt (2)
Brace for distance adjustment
Lock for handle (2)
Handle for distance adjustment (old No. 916579) (2)
Scraper (2)
Guard, left
Guard, right
Bearing housing, pre-crusher (2)
Bearing housing, adjustable (2)
Bearing housing, fixed (2)
Spring for scraper
Bearing for main rollers (4)
Bearing for pre-crusher (2)
Turning roller, complete
V-belt AA66.5 (2) (old No. 2520123 – A67)
V-belt SPA 1657 (4)
V-belt pulley, main drive SPA400x4 Ø 50
V-belt pulley, double drive SPA200x2 Ø 40
V-belt pulley, pre-crusher SPA90x2 Ø 30
V-belt pulley A100-4 Ø 38 for motor
Taperlock for 2420121
13
14
15
17
18
20
22
23
25
26
27
32
33
34
May 2013/PR/AB
69
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Hopper – old model
Spare parts drawing KB200/2, KB200/3 and KB300/3 – Drive – old
model
May 2013/PR/AB
70
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing KB200/2, KB200/3 and KB300/3 – old model
May 2013/PR/AB
71
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
GRAIN CRUSHER KB200/3 AND KB300/3 – NEW MODEL
Inlet
1
2
3
4
7
9
10
11
100018
1800016
911185
7004767
6003626
6302009
6302013
911203
Inlet hopper
Clamp Q16
Magnet tray complete
Magnet (12)
Wing bolt M6x16
Hand wheel M8x25
Ball handle M10
Handle for throttle
Legs and protection guards
1+3
911221
Set of V-belt guards, right/left
4
910070
Set long legs incl. vibration dampers
4
910071
Set short legs incl. vibration dampers
5
916719
Safety grate
6
1800038
Clamp Q20
2
3
4
5
6
7
9
10
11
12
16
18
20
22
23
24
25
KB200/3
2420006
2420086
2520106
2430103
2420120
916664
916666
916682
6407068
6407098
916679
911216
916720
911215
911217
911201
911201
KB300/3
2420012
2420086
2520106
2430103
2420121
916664
916666
916736
6407068
6407092
916746
911234
916720
911215
911230
911229
911229
26
27
28
34
35
36
37
38
39
41
916723
911198B
916575
911212
2420010
2430109
2420008
2430081
2520126
911205
916723
911223B
916575
911212
2420010
2430109
2420008
2430081
2520126
911205
May 2013/PR/AB
V-belt pulley SPA400-3/4
Taperlock 3020 Ø50
V-belt SPA 1657 (3-4)
Taperlock 1610 Ø38
V-belt pulley SPA100-3/4
Bearing housing pre-crusher (2)
Lock bushing (6)
Bearing housing main roller (4)
Bearing GRAE 40 NPPB (2)
Bearing GE50/60 KRRB (4)
Adjustment bow for pre-crusher
Adjustment bow for main roller
Stop for adjustment bow
Side plate complete, right
Pre-crusher roller
Roller, driving
Roller, adjustable (old No. 911218
and 911228)
Suspension for scraper ( 2)
Scraper (2)
Spring for scraper
Side plate complete, left
V-belt pulley SPA90-2
Taperlock 1610 Ø40
V-belt pulley SPA200-2 (2)
Taperlock 2517 Ø40 (2)
V-belt AA1740 (2)
Turning roller complete 911205
72
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
42
47
48
911204
6401074
6401075
916702
6301061
6900323
916576
911227
916707
916576
911206
916707
May 2013/PR/AB
consisting of:
Bracket
Ball bearing
Ball bearing
Lock ring
Bearing (2)
Motor bracket
Tightening bolt (2)
73
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Inlet KB200/3 and KB300/3 – new model
Legs and protection guards KB200/3 and KB300/3 – new model
May 2013/PR/AB
74
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
KB200/3 and KB300/3 – new model
May 2013/PR/AB
75
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
GRAIN CRUSHER KB100
7
9
11
12
13
13
16
17
18
19
21
22
25
30
31
32
33
34
35
37
41
42
44
45
46
47
48
Special
59
60
63
64
65
66
6000477
910026
913014
2520053
911118
6306057
6000920
911048
916478
7407071
911049
911104
6407077
6407071
911028
911107
914035
6302013
6302007
914057
7004101
6306051
911050
911017
916222
914065
911047
916223
911040
6302014
914071
916224
916287
Set screw M12 x 100
Belt pulley for motor A-3-75
Belt pulley for crusher A-3-355
V-belt A-53 (3)
Belt guard
Nut M8 (3)
Driving roller with shaft
Tightening ball bearing complete (2)
Loose bearing
Crusher roller with shaft
Crusher roller for double drive
Bearing for driving roller complete (2)
Loose bearing
Housing
Scraper (2)
Spring
Bakelite ball M10 x 40
Hand wheel
Inspection window
Quick lock
Magnet (2)
Inlet hopper
Outlet
Thrust shaft (2)
Bushing (2)
End plate
Bow
Quick releaser
Pin for quick releaser
Laminated spring (4)
Guard for noise suppression (2)
parts for double drive:
911103
Tightening plate
6401028
Bearing
916409
V-belt pulley
2520121
V-belt
916408
V-belt pulley (crusher roller)
1125065
Parallel key
911102
Belt guard
May 2013/PR/AB
76
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
77
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
GRAIN CRUSHER KB150
1
7
9
11
12
13
16
17
18
19
21
22
25
27
31
32
32
33
34
35
37
41
42
45
46
47
48
51
53
67
Special
59
60
63
64
65
66
2320066
910026
910027
913014
2520053
911118
916454
6306057
914067
916478
6407071
911101
6407077
6407071
911028
911107
914035
911152
6302007
914057
7004101
6306051
914062
911017
916222
914065
911047
911040
6302014
914071
916224
6306052
916287
911108
915096
613006
916456
6111075
4 kW Motor 1500 UpM B3
V-belt pulley for 4 kW A-3-75
V-belt pulley for 5.5-7.5 kW
V-belt pulley for crusher A-3-355
V-belt A-53 (3)
Belt guard
Inside guard for belt guard
Driving roller with shaft
Tightening ball bearing complete (2)
Loose bearing
Crusher roller for single and double drive
Bearing for driving roller complete (2)
Loose bearing
Housing
Scraper (2)
Spring
Inlet complete
Hand wheel
Inspection window
Quick lock
Magnet (4)
Inlet hopper
Outlet
Thrust shaft (2)
Bushing (2)
End plate
Quick releaser
Pin for quick releaser
Laminated spring (4)
Guard for noise suppression (2)
Guideway, set
Guide for bearing (4)
Spring
Thrust plate
Plate spring (40)
parts for double drive:
911103
Tightening plate
6401028
Bearing
916409
V-belt pulley
2520121
V-belt
916408
V-belt pulley (crusher roller)
1125065
Parallel key
911102
Belt guard
May 2013/PR/AB
78
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
79
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
PRE-CRUSHER
1
2
3
4
9
13
20
26
916253
6205053
911059
6002007
911057
6407005
2520071
911056
6205055
Stop ring
Pipe pin Ø 4 x 30
Spindle
Steel disc
Driven roller with shaft
Flange bearing (4)
V-belt A-71 (3)
Drive roller with shaft
Pipe pin Ø 4 x 45 (2)
Type 910030:
25
916539
Cog wheel, t = 35 (2)
Type 910062:
25
916537
Cog wheel, t = 36 (2)
Spare parts drawing pre-crusher
May 2013/PR/AB
80
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
VERTICAL MIXER LAMIX
1
2
3
4
5
6
7
8
9
10
11
15
16
17
18
19
20
21
22
23
24
613023
613024
611021
611018
611019
613026
613027
613029
613030
6000464
6001169
600013
613059
173001
611024
611025
611026
631013
631014
631011
621007
651002
653000
613005
613006
613007
611003
631000
613014
6407071
6407072
2520012
2520016
May 2013/PR/AB
Inspection window
Frame for inspection window
Forced pipe for type 2
Suspension for forced pipe, upper (3-6)
Suspension for forced pipe, lower (3)
Bottom plate
Pin
Bolt M12x25 FZB for pin
Disc M12 FZB for pin
Scraper
Stop ring 5 mm thick
Washer
Auger A-2
Auger A-3
Auger A-4
Auger B-2
Auger B-3
Auger B-4
Auger A-3 CENTRI
Auger C-3
Scraper, bottom
Bearing, bottom
Key
Weight
Bottom hopper model A
Bottom hopper model B
Bottom inspection door
Upper bearing (ball bearing)
Bearing housing
V-belt A-112 (2)
V-belt A-116 (2 or 3)
81
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing vertical mixer LAMIX
May 2013/PR/AB
82
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DIAGONAL MIXER UNI-MIX 500
1
2
3
4
8
9
10
12
13
16
19
591084
591087
591089
591091
591097
591100
591103
591109
591112
591115
6002006
6001015
21
298160
22
595059
6001169
6000922
25
595087
26
595099
2320060
36
595272
37
6407064
38
595273
1125065
39
595275
6900244
6900250
40
595274
1116046
41
600003
42
2520074
2520010
43
2420066
2430101
44
595278
6004013
49-50-51 590029
60
7005615
595060
595059
May 2013/PR/AB
Bottom
Bearing plate (2)
Auger
Legs
Bracket for intermediary shaft
V-belt guard
Chain guard
Guiding plate
Throttle
Arm for tension roller
Washer 12 mm
Lock nut M10
Distance ring
Shaft for tightening roller
Washer 12 mm
Nut M12
Spring
Spring tightener
Intermediary shaft
Bearing (2)
Chain cog wheel ½” x 5/16” Duplex
Key A8x7x25
Chain ½” x 5/16” Duplex
Straight joint
Cranked joint
Chain cog wheel ½” x 5/16” Duplex
Key A8x7x32
V-belt A-74 for 300 kg (2)
Taperlock 1610 Ø 28
Bearing (2)
Deckel
Chain spray
Tension roller
Shaft for tension roller
83
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing diagonal mixer UNI-MIX 500
May 2013/PR/AB
84
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DIAGONAL MIXER UNI-MIX 1000, OLD MODEL
1
2
6
7
16
16
21
22
23
24
25
26
28
29
32
33
34
40
41
44
47
48-49
72
591194
591262
6407077
591006
591008
595388
595104
591041
595171
1125065
6407005
595172
6900234
143008
6407077
595175
6404011
595174
595168
595169
6900244
6900250
591020
595098
591186
591155
7004441
7005615
595060
595059
591023
7004056
May 2013/PR/AB
Schneckentrog
Mixer auger (old No. 591026)
Bearing RCJ 40
Inlet
Cover for manual intake
Lock for cover for manual intake (2)
Intermediary shaft
Duplex chain wheel 65 teeth ½” x 5/16”
Chain wheel 11 teeth, 1”
Parallel key 8 x 7 x 25 (2)
Bearing FY 30 TF (2)
Chain for auger 1”
Straight joint
Parallel key 12 x 8 x 28
Bearing RCJ 40
Tightening chain wheel
Ball bearing
Distance bushing
Duplex chain wheel 17 teeth
Chain joint, straight
Chain joint, bent
Grid
Hinge for inspection door (3)
Set attachment (cable to keep inspection door open)
Closing mechanism for inspection door (2)
Tightening list (4 m)
Chain spray
Tension roller
Shaft for tension roller
Superstructure
Seal list (1.7 m)
85
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing for UNI-MIX 1000, old model
May 2013/PR/AB
86
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DIAGONAL MIXER UNI-MIX 1000 GM
15
20
44
44
19
1
16
16
591007
591026
6407077
6407077
6801007
2320093
6306059
591023
7004056
591008
595388
Guide plate
Mixing auger
Bearing
Bearing
Gear
Motor 4 kW 1400 rpm
Rubber bush
Superstructure
Seal list (1.7 m)
Cover for manual intake
Lock for cover for manual intake (2)
Spare parts drawing diagonal mixer UNI-MIX 1000 GM
44
20
44
May 2013/PR/AB
87
19
1
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DIAGONAL MIXER UNI-MIX 1000
Parts for re-construction of old model to gear motor drive
Only possible if the shaft is 40 mm.
1
2
3
4
5
6
7+9
8
10
11
6801007
2320093
591199
595432
173001
6000464
6001016
6000478
6000539
6001169
6306059
6000473
6001169
6001016
May 2013/PR/AB
Gear
Motor 4 kW 1400 rpm
Holder
Distance pipe
Washer
Lock nut M12 (3)
Set screw M12x150
Screw
Washer (4)
Bolt 12x45 (4)
Washer M12 (4)
Lock nut M12 (4)
88
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DIAGONAL MIXER UNI-MIX 1500 GM
20
44
19
1
591262
6407077
6801017
2320096
Mixer auger (old No. 591026)
Bearing (2)
Gear
Motor 5.5 kW 1400 rpm B5
44 19
44
May 2013/PR/AB
20
89
1
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HORIZONTAL MIXER H-1000
1
2
3
4
5
6
2320069
2520105
6801024
6407078
591200
591264
590105
Electric motor 11 kW 1400 rpm B3
V-belt SPA 2207 (3)
Shaft gear TA60.60/D i=25
Flange bearing RCJO 60
Slide bearing
Auger
Spare parts set cpl. with auger and bearings
(for mixers from before July 2006, with gear TA60/60
= 60 mm shaft)
Spare parts drawing
3
1
4
5
6
May 2013/PR/AB
90
2
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
HORIZONTAL MIXER TYPE 3
1
2
3
4
5
6
6802232
6802195
6802230
6802161
6802229
6802234
7
8
9
10
11
12
13
14
15
16
17
18
19
20
7004619
759000055
6900328
6801024
2320069
2420077
2420080
2430086
2420079
2520105
595458
595457
595460
591264
590105
21
22
23
24
25
26
595463
595464
591205
595461
595462
6407005
May 2013/PR/AB
Magnet valve
Air tube (2)
Union (3)
Variable flow control valve
Union
Cylinder with variable flow
control valve
Rubber list packing (6.5 m)
End stop (4) (old No. 2385084)
Bearing (2)
Gear
Motor
Belt pulley (gear)
Belt pulley (motor)
Taperlock (motor)
Taperlock (gear)
V-belt (3)
Bearing housing (2)
Bearing (2)
Parallel key
Auger
Auger cpl. with bearings
(for mixers from before July 2006,
with gear TA60/60
= 60 mm shaft)
Bushing set for closing arms
Cotter bolt set for closing arms
Support bearing (4)
Rotary fittings
Fork
Bearing (4)
91
fig.
fig.
fig.
fig.
fig.
11
13
1
13
1
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
fig.
13
1
12
1
2
2
2
2
2
2
2
6
7
1
1
fig.
fig.
fig.
fig.
fig.
fig.
8
5
9
3
4
10
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts sketches for horizontal mixer type 3
Fig. 1
Pos. 20
Pos. 7
Pos. 9
Pos. 19
Pos. 5
May 2013/PR/AB
Pos. 3
92
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Fig. 2 and 3
Pos. 11
Pos. 10
Pos. 14
Pos. 12
Pos. 13
Pos. 15
Pos. 16
Pos. 24
May 2013/PR/AB
93
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Fig. 4 and 5
Pos. 25
Pos. 22
May 2013/PR/AB
94
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Fig. 6, 7 and 8
Pos. 17
Pos. 18
Pos. 21
May 2013/PR/AB
95
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Fig. 9 and 10
Pos. 23
Pos. 26
May 2013/PR/AB
96
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Fig. 11, 12 and 13
Pos. 1
Pos. 8
Pos. 2
Pos. 6
May 2013/PR/AB
97
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
PRE-BIN FOR HORIZONTAL MIXER TYPE 3
1
2
3
4
5
6
7
8
9
10
11
591204
6802230
6407005
591206
6802232
6802226
6802231
6802161
6802227
6802195
591207
759000055
May 2013/PR/AB
Rubber lobe for outlet
Single union
Bearing
Cotter bolt set complete with bushes
Magnet valve
Cylinder
T-piece Ø 6
Throttle valve
Fork QM / 8025 / 24
Air tube 6x4
Rubber packing for pre-bin and mixer
End stop for hatch (old No. 2385084)
98
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts sketches for pre-bin
Pos. 6
Pos. 1
Pos. 2
Pos. 7
Pos. 3
Pos. 8
Pos. 4
Pos. 5
Fig. 9. Spare parts, complete, for prebin
Pos. 10
Pos. 8
Pos. 5
Pos. 6
Pos. 9
Pos. 7
Fig. 10. Spare parts for air unit of hatch arrangement
Pos. 11
Fig. 11. End stop
May 2013/PR/AB
99
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
POST-BIN FOR HORIZONTAL MIXER TYPE 3
1
2
3
4
5
6407005
2320093
6801007
591026
143008
Bearing
Motor
Gear
Auger
Parallel key for gear
Spare parts sketches
Pos. 1
Pos. 5
Pos. 3
Pos. 2
May 2013/PR/AB
100
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
BOOSTER FAN DME
1
3
4
5
6
8
2340063
2340065
2340093
2340090
201111
214002
201112
201113
201114
216114
6000458
6001172
206295G
200100
200101
200102
Motor 2.2 kW
Motor 4.0 kW
Motor 5.5 kW
Motor 7.5 kW
Fan housing
Reinforcement liner
Fan for 2.2 kW
Fan for 4 kW
Fan for 5.5–7.5 kW
Tension disk
Set screw M10x35
Spring washer 10 mm
Cover for conical connection
Ø 100 mm conical connection
Spare parts drawing
May 2013/PR/AB
101
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
BOOSTER FAN, OLD TYPE (SQUARE)
201005
201000
201009
201026
203011
221032
221033
210019
220024
250015
200010
210015
210044
200007
200009
May 2013/PR/AB
Fan for 2.2 kW
Fan for 4 kW
Fan for 5.5-7.5 kW
Fan for 11-15 kW
Reinforcement liner
Reinforcement liner SUPER, upper part
Reinforcement liner SUPER, lower part
Inlet 80 mm
Inlet 100 mm
Inlet 120 mm
Inlet 150 mm
Outlet 80 mm
Outlet 100 mm
Outlet 120 mm
Outlet 150 mm
102
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
MOLASSES PUMP TYPE 590046
595345
2330013
6801052
Molasses pump
Motor
Coupling
Spare parts drawing
May 2013/PR/AB
103
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
FAT PUMP TYPE 590081
1
15
18
19
2320004
6802217
6802222
6802220
Electric motor
Oil pump
Coupling OMT
Counter valve ¾”
Spare parts drawing
May 2013/PR/AB
104
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SLUICE VALVE Ø 150 MM
2
5
6
7
16
17
1801049
1805230
6407090
6407045
2391037
2391038
Sluice wheel
Distance piece (2)
Bearing housing (4)
Bearing (2)
Motor
Gear
Spare parts drawing
May 2013/PR/AB
105
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TWO-WAY VALVE
30
1813010
Spring
1810103
1810101
1810102
1810019
1810018
Two-way
Two-way
Two-way
Two-way
Two-way
valve
valve
valve
valve
valve
100 mm without motor, side
150 mm without motor, breech
Spare parts drawing
May 2013/PR/AB
106
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TWO-WAY VALVE – Throttle Motor
1,2,3
4
5
6,7
9
10
1815271
1815272
1815273
1815274
2392057
196070093
1810132
Bracket, slide, and arm for motor
Bush (2)
Distance disc (2)
Guard and under guard
Controller Linak
Spindle motor Linak (old No. 2382058/2392059)
Motor set complete
Below spare parts drawing shows throttle motor without guard
Spare parts drawing throttle motor
May 2013/PR/AB
107
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TWO-WAY VALVE –Switches
3
759000055
End stop (2) (old No. 2385084)
The below spare parts drawing shows the arrangement for manually
operated two-way valves
(For two-way valves with Linak motor, pos. 1 and 2 are NOT used).
May 2013/PR/AB
108
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
FLEX AUGERS, OLD MODEL WITH ORANGE TUBES
75 mm flex auger with 1.1 kW gearmotor (400 rpm):
1
6000922
Nut
3
115029
Clamping plate
4
6001172
Spring washer (2)
5
6002005
Tension disc (2)
6
6000457
Set screw (2)
8
1116024
Parallel key
9
2392064
Gear
10
865090
Stop ring
11
6004123
Allen screw M6x20 MC
12
6004105
Allen screw M6x10
13
6301058
Locking ring
14
6004123
15
861022
Safety cover
16
2340131
Motor 1.1 kW B14 2800 rpm
90 mm flex auger with 1.1 kW gearmotor (400 rpm):
1
6000922
Nut
3
865132
Clamping plate
4
6001172
Spring washer (2)
6
6000456
Set screw (2)
8
1116024
Parallel key
9
2392064
Gear
10
865090
Stop ring
11
6004123
12
6004105
Allen screw M6x10
13
6301058
Locking ring
14
6004123
15
861022
Safety cover
16
2340131
May 2013/PR/AB
109
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
90 mm flex auger with 1.5 kW gear motor (400 rpm):
1
6000922
Nut
2
865133
Regulation rod
3
865132
Clamping plate
4
6001172
Spring washer (2)
6
6000457
Set screw (2)
7
865128
Shaft
8
1116024
Parallel key
10
865090
Stop ring
11
6004123
12
6004105
Allen screw M6x10
13
6301058
Locking ring
14
6004123
15
861022
Safety cover
16
2340132
90 mm flex auger with 2.2 kW gear motor (400 rpm):
1
6000922
Nut
2
865133
Regulation rod
3
865132
Clamping plate
4
6001172
Spring washer (2)
6
6000457
Set screw (2)
7
865128
Shaft
8
1116024
Parallel key
10
865090
Stop ring
11
6004123
12
6004105
Allen screw M6x10
13
6301058
Locking ring
14
6004123
15
861022
Safety cover
16
2340133
May 2013/PR/AB
110
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing flex auger
May 2013/PR/AB
111
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
75 mm flex auger with V-belt drive 1.1 kW, spare parts drawing No.
869001:
1
6000922
Nut
2
115029
Clamping plate
3
6001172
Spring washer (2)
4
6000456
Set screw (2)
5
865057
Shaft pin
6
6401028
Ball bearing
14
865061
Distance ring
15
6401028
Ball bearing
20
1116024
Parallel key
21
865058
Regulation rod
22
6004123
23
865090
Stop ring
26
861022
Safety cover
28
2320062
31
2520103
V-belt (2)
32
6301058
Locking ring
869001:
1
6000922
Nut
2
115029
Clamping plate
3
6001172
Spring washer (2)
4
6000456
Set screw (2)
5
865142
Shaft pin
6
6401028
Ball bearing
14
865061
Distance ring
15
6401028
Ball bearing
17
865126
Belt pulley
20
1116024
Parallel key
21
865058
Regulation rod
22
6004123
23
865090
Stop ring
26
861022
Safety cover
28
2320063
31
2520103
V-belt (2)
32
6301058
Locking ring
May 2013/PR/AB
112
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
869001:
1
6000922
Nut
2
865132
Clamping plate
3
6001172
Spring washer (2)
4
6000457
Set screw (2)
5
865128
Shaft pin
6
6401028
Ball bearing
14
865061
Distance ring
15
6401028
Ball bearing
20
1116024
Parallel key
21
865058
Regulation rod
22
6004123
23
865090
Stop ring
26
861022
Safety cover
28
2320063
Motor 1.5 kW B3 1400 rpm.
31
2520103
V-belt (2)
32
6301058
Locking ring
869001:
1
6000922
Nut
2
865132
Clamping plate
3
6001172
Spring washer (2)
4
6000457
Set screw (2)
5
865128
Shaft pin
6
6401028
Ball bearing
14
865061
Distance ring
15
6401028
Ball bearing
17
865126
Belt pulley
20
1116024
Parallel key
21
865058
Regulation rod
22
6004123
23
865090
Stop ring
26
861022
Safety cover
28
2320060
Motor 2.2 kW B3 1400 rpm.
31
2520103
V-belt (2)
32
6301058
Locking ring
May 2013/PR/AB
113
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 869001 – Flex auger
May 2013/PR/AB
114
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Flex augers – Gear motor 550 rpm
2
6000456
Set screw (2)
3
6001172
Spring washer (2)
4
115029
Clamping plate
6
6004125
7
865063
Shaft pin
8
6004125
Allen screw M10x10
9
6000922
Nut
Flex augers – Gear motor 84 rpm
1
861015
Gearmotor
2
6000456
Set screw (2)
3
6001172
Spring washer (2)
4
115029
Clamping plate
6
6004125
7
865063
Shaft pin
8
6004125
Allen screw M10x10
9
6000922
Nut
Spare parts drawing
May 2013/PR/AB
115
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
75 mm flex auger - Outlet:
1
861034
Safety cover
2
6004123
3
6004105
4
865090
Stop ring
6
6401028
Ball bearing
7
865061
Distance ring
8
861033
End flange with bearing housing
9
6401028
Ball bearing
10
865089
Shaft pin
11
115029
Clamping plate
13
6000456
Set screw (2)
14
6001172
Spring washer (2)
90 mm flex auger - Outlet:
1
861034
Safety cover
2
6004123
3
6004105
4
865090
Stop ring
6
6401028
Ball bearing
7
865061
Distance ring
8
861033
End flange with bearing housing
9
6401028
Ball bearing
11
865132
Clamping plate (2)
13
6000457
Set screw (2)
14
6001172
Spring washer (2)
May 2013/PR/AB
116
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing – Flex auger
May 2013/PR/AB
117
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
75 mm flex-auger – Auger flights and pipes:
1920139
Flex auger flights, S = 33 mm (order for 1 m)
1920140
860051
Socket joint
1920143
Pipe, L = 3 m
1920138
Bend 40°
90 mm flex-auger – Auger flights and pipes:
1920234
860070
Socket joint
1920231
Pipe, L = 3 m
1920233
Bend 45°
May 2013/PR/AB
118
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
FLEX AUGER, CURRENT MODEL WITH BLUE PIPES
75/90 mm flex auger:
1
6004191
2
6001180
3
6001147
4
6000920
5
6001171
6
6407080
7
6402075
8
865250
9
6004144
10
6001014
11
6003635
12
6003636
13
865261
14
865256
15
861093
861094
16
6000446
17
6001171
18
6000920
19
865237
20
865244
865245
21
865253
865254
6001171
6001014
May 2013/PR/AB
Allen screw M8x20
Star lock washer
Tension disc
Nut
Spring washer
Bearing housing
Bearing 6304 2RS1
Bearing plate
Allen screw M6x15
Lock nut
Flange bolt
Flange nut
Connection
Side for inlet
Socket 75 mm
Socket 90 mm
Set screw
Spring washer
Nut
Cover
Pin 75 mm
Pin 90 mm
Hook 75 mm
Hook 90 mm
Washer for hook 75/90 mm
Lock nut for hook 75/90 mm
119
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing
May 2013/PR/AB
120
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Flex auger, current model – Gear motor with drive shaft:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2392074
6002012
6001172
6013026
6000448
6001171
6000920
2340140
2340131
865246
865247
6001014
6004194
6004193
6000456
6001172
115029
865132
1116046
May 2013/PR/AB
Gear
Tension disc
Spring washer
Allen screw M10x16
Set screw
Spring washer
Nut
Motor 0.75 kW
Motor 1.1 kW
Shaft pin 75 mm
Shaft pin 90 mm
Lock nut
Allen screw M8x45 for 75mm
Allen screw M8x55 for 90 mm
Set screw
Spring washer
Clamping plate for 75 mm
Clamping plate for 90 mm
Parallel key
121
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing
May 2013/PR/AB
122
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Flex auger, current model – Pipe for inlet:
1
2
4
6
7
8
10
13
14
865244
865245
865253
865254
865289
865291
865293
865294
6402075
6301068
6001014
6004191
6004102
Pin for 75 mm
Pin for 90 mm
Hook for 75 mm
Hook for 90 mm
Bearing cover for 75 mm
Bearing cover for 90 mm
Pipe for 75 mm
Pipe for 90 mm
Ball bearing
Lock ring
Lock nut (2)
Allen screw M8x20
Allen screw M6x8
Spare parts drawing
May 2013/PR/AB
123
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
PIPE AUGER 102 AND 152 MM (NEW MODEL)
1941060
0.565 m auger Ø 102 mm
Auger extensions
Item No.
FA102
Description
Inlet Extension
0.5 m w. normal pitch, socket joint, pin
1 m w. reduced pitch, socket joint, pin
1 m w. normal pitch, socket joint, pin
0.685 m w. 2 socket joints + 2 pins
Pipe +
Auger
1940002
1940012
1940014
1940008
FA152
Loose
Auger
1941014
1941013
1941017
1941003
Pipe + Loose
Auger
Auger
1940020 1941027
1940018 1941026
Item No.
Description
Auger Extension
0.5 m w. socket joint + pin
1 m w. socket joint + pin
May 2013/PR/AB
FA102
Pipe +
Auger
1940001
1940003
1940004
1940005
124
FA152
Loose
Auger
1941002
1941004
1941005
1941006
Pipe + Loose
Auger
Auger
1940015 1941019
1940016 1941020
1940017 1941021
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Item No.
Description
Outlet Extension
0.5 m w. socket joint + pin
FA102
Pipe +
Auger
1940009
1940010
1940011
FA152
Loose
Auger
1941010
1941011
1941012
Pipe + Loose
Auger
Auger
1941021 1941024
1940007 1941025
End plate
End plate with bearing complete
Loose bearing for end plate
End plate with bearing complete, with drain
Loose bearing for end plate with drain
May 2013/PR/AB
125
FA102
FA152
1941015
640275
1941029
6401077
1941031
1505851
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Worm drive for pipe auger FA102
Complete work drive
Motor
Gear
Item No.
kW
RPM
Item No.
RPM
Item No.
Ratio
Auger
1920338
1920337
1920419
1920341
1920407
1920408
1920409
1920342
1920395
1940031
0.55
0.55
0.75
0.75
1.1
1.1
1.1
1.5
1.5
1.5
90
140
90
140
140
280
560
280
560
280
2340075
2340075
2340143
2340143
2340131
2340131
2340131
2340141
2340141
2340141
1400
1400
1400
1400
2800
2800
2800
2800
2800
2800
2392080
2392074
2392074
2392074
2392078
2392074
2392091
2392074
2392091
2392074
i=15
i=10
i=15
i=10
i=20
i=10
i=5
i=10
i=5
i=10
FA102
FA102
FA102
FA102
FA102
FA102
FA102
FA102
FA102
FA152
May 2013/PR/AB
126
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Gear Wheel Drive for Pipe Auger FA152 System
Gear
RPM kW
Motor
RPM
87
123
123
182
190
190
217
217
257
257
280
295
320
320
364
364
560
560
639
950
950
950
1400
950
950
950
950
2800
2800
1400
1400
1400
1400
2800
2800
2800
2800
2800
1.1
1.5
2.2
2.2
3,0
4.0
1.5
2.2
1,5
2.2
5.5
1.5
2.2
3.0
3.0
4.0
5.5
7.5
4.0
Item No.
Gear
Type
2320088
2320090
2320091
2320030
2320092
2320097
2320090
2320091
2320089
2340063
2320094
2320085
2320030
2320029
2340097
2340065
2340093
2340090
2340065
042/10.9
052/7.7
052/7.7
052/7.7
081/5
081/5
061/4,38
061/4.38
042/10.9
042/10.9
081/5
051/4.75
061/4.38
061/4.38
052/7.7
052/7.7
081/5
081/5
061/4.38
Item No.
Bush
Gear
Item No.
Bush
Auger
Item No.
Flex
Coupling Element
Item No. Item No.
6801031
6801036
6801036
6801036
6801035
6801035
6801033
6801033
6801031
6801031
6801035
6801032
6801033
6801033
6801036
6801036
6801035
6801035
6801033
2430089
2430098
2430098
2430098
2430103
2430103
2430101
2430101
2430089
2430089
2430103
2430107
2430101
2430101
2430098
2430098
2430103
2430103
2430101
2430102
2430102
2430103
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2430102
2420112
2420112
2420112
2320112
2420113
2420113
2420112
2420112
2420112
2420112
2420113
2420112
2420112
2420112
2420112
2420112
2420113
2420113
2420112
2420115
2420115
2420115
2420015
2420116
2420116
2420115
2420115
2420115
2420115
2420116
2420115
2420115
2420115
2420115
2420115
2420116
2420116
2420115
Important: Item No. for coupling is stated as a coupling half. For a complete coupling should be
ordered 2 pcs. halves.
Rain cover for gear motor bracket:
At gear size 042 + 051 + 061 1921088
At gear size 081
1921089
May 2013/PR/AB
127
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
PIPE AUGER 102 MM (OLD MODEL)
1920324
1920325
1805090
6004194
6001014
1921000
1921002
1921003
1921004
1921005
1921006
1921007
1921008
1921009
1921010
1921011
1921012
1921013
1921014
1921015
1921016
1920129
1920131
1920136
2520003
1920274
1920275
1920276
2520035
2520031
1920278
1920279
1920280
1920281
1920282
1920283
1920390
1920391
May 2013/PR/AB
Belt pulley for belt drive 1:1.3 (A-2-100)
Belt pulley for belt drive 1:2.7 (A-2-200)
Key
Bolt
Nut
Cpl. double bearing ring with drive shaft (250425)
0.5 m auger, right-hand (250080)
1.0 m auger with ejector, right-hand (250443)
3.0 m auger with ejector, right-hand (250445)
Ø18 mm shaft pin complete (250107)
Bevel wheel for angle drive (250130)
Feeding auger for angle drive 0-45° (250133)
Receiving auger for angle drive 0-45° (250134)
Chain wheel for angle drive 0-90° (250136)
Chain wheel for angle drive 0-90° (250137)
Rolling chain ½” for angle drive 0-90° (250059)
Feeding auger for angle drive 0-90° (250141)
Receiving auger for angle drive 0-90° (250142)
1.0 m auger with pin and bolt, left-hand (MICA)
V-belt A28 for belt drive 1:1.3 (250420)
Cover (250402)
Clamp, pair with bolts (250473)
Pipe for bearing mounting (250406)
V-belt A35 for belt drive 1:2.7 (250421)
V-belt A31 (250035)
0.5 m auger with pin and bolt, reduced flight (250086)
Belt tightener complete (250470)
Bearing complete for angle drive (double) (250055)
Auger for single emptying auger 0.7 m (252210)
Auger for double emptying auger (252245)
128
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
PIPE AUGER 152 MM (OLD MODEL)
1920285
1920286
2520036
1920287
1920288
1920289
1920290
1920291
1920292
1920293
1920186
May 2013/PR/AB
V-belt pulley A-3-100 Ø10 for motor (250611)
V-belt pulley A-3-100 Ø24 for motor (250612)
V-belt A36
Bearing complete (250625)
Drive shaft (251308)
1.0 m auger with pin and bolt, for inlet (250624)
1.0 m auger, reduced flight (250636)
1.0 m auger with pin and bolt, for outlet (250637)
3.0 m auger for outlet (250638)
Bolt bag for extension, with pin and bolt (250363)
End bearing
129
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing 1514 254” 8110 1920150, pipe auger
Direct drive for gear motor
May 2013/PR/AB
130
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
V-belt drive 1:1.3
May 2013/PR/AB
131
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
V-belt drive 1:2
May 2013/PR/AB
132
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
V-belt drive 1:2.7
May 2013/PR/AB
133
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
V-belt drive 1:4
May 2013/PR/AB
134
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Angle piece 0-45°
May 2013/PR/AB
135
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Angle piece 0-90°
May 2013/PR/AB
136
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TROUGH AUGERS (OLD MODEL)
Type U10
1920294
1920295
1920296
1920297
1920298
1920245
1920299
1920300
1920301
1920302
Type U10 and U15
1920303
1920304
1920305
1920306
1920307
1920308
Type U15
1920309
1920310
1920311
1920312
1920313
1920314
1920315
1920319
May 2013/PR/AB
Chain wheel intermediary shaft (271098)
Complete bearing ring (271033)
Driving shaft (271016)
Bearing complete (250446)
Intermediary shaft (271026)
Intermediary bearing (271046)
1.0 m auger (271128)
2.0 m auger (271129)
Auger for end outlet (271130)
Shaft for end plate (271027)
Chain wheel 5/8” x 34 Ø 20
(271099)
Chain 5/8” x 51 (271101)
Chain 5/8” x 57 (271100)
for intermediary shaft
for motor (271095)
for motor (271104)
for auger (271096)
Complete bearing/driving shaft (271034)
Driving shaft (271017)
1.0 m auger (271149)
2.0 m auger (271150)
Shaft pin for end plate (271028)
Complete bearing and shaft (271081)
Bearing and cover (271083)
Intermediary bearing (271047)
137
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing 1920189 – 1528 27109134
driving unit U10, 1:3.4
May 2013/PR/AB
138
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
139
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
140
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
MILLMIX UNIT COMPACT (UNI-MIX mixer 500 and
hammer mill 2S)
UNI-MIX mixer 300-500 kg:
1
2
3
4
8
9
10
12
13
16
19
21
22
23
25
26
36
37
38
39
40
42
44
60
591084
591087
591089
591091
591097
591100
591103
591109
591112
591115
6002006
6001015
298160
595059
6001169
6000922
595060
595087
595099
2320060
595272
6407064
595273
1125065
595275
6900244
6900250
595274
1116046
2520074
2520010
595278
7005615
May 2013/PR/AB
Bottom
Bearing plate (2)
Auger
Legs
Bracket for intermediary shaft
V-belt guard
Chain guard
Guiding plate
Throttle
Arm for tightening roller
Washer 12 mm
Lock nut M10
Distance ring
Shaft for tightening roller
Spring washer 12 mm
Nut M12
Tightening roller
Spring
Spring tightener
Intermediary shaft
Bearing (2)
Sprocket wheel ½” x 5/16” Duplex
Parallel key A8x7x25
Straight joint
Bent joint
Sprocket wheel ½” x 5/16” Duplex
Parallel key A8x7x32
Bearing housing with bearing (2)
Chain spray
141
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing COMPACT plant – UNI-MIX mixer
May 2013/PR/AB
142
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Hammer mill 2S for COMPACT plant:
1
10
11
12
13
14
16
18
19
23
24
25
26
27
28
31
32
2340065
271089
271057
276092
211073
6004145
145147
271087
6001172
6000921
6000455
6000456
211151
210009
210008
210007
210095
210006
591138
686029
7004025
591135
1820025
591132
6000444
6001171
7004242
1820031
May 2013/PR/AB
Motor 4 kW 3000 rpm
Rotor
Set of 12 hammers
Distance pipe (12)
Hammer bolt (4)
Tension disc for rotor
Grinding chamber
Spring washer 10 mm for grinding chamber (12)
Nut 10 mm for grinding chamber (12)
Set screw M10x20 for grinding chamber (11)
Set screw M10x25 for grinding chamber
Screen 3.0 mm
Screen 3.5 mm
Screen 4.0 mm
Screen 4.5 mm
Screen 5.0 mm
Suction pipe 30°
Rubber socket
Clamp (2)
Suction pipe
Clamp Ø 80
Suction connection
Set screw M8x10 (6)
Filter 300 mm (4)
Clamp Ø 300
143
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 027-9019
May 2013/PR/AB
144
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
PICCOLO MILLING/MIXING PLANT
Mixer:
12
18
222
44
52
56
148
150
600013
681011
681066
661007
613030
613005
653000
6407071
6407072
2520012
684001
681036
1820035
685060
1820025
686133
816112
681016
Scraper
Bottom hopper
Auger
Forced pipe
Pin
Lower bearing
Scraper
Ball bearing
Bearing housing (2)
V-belt (2)
Filter
Dust collection hopper
Ø 80 mm galv. 90° bend
Ø 80 mm galv. pipe
Ø 80 mm clamp (4)
Ø 80 mm pipe, L = 150 mm
Micro switch
Inlet connection Ø 80 – mixer
Hammer mill:
3
4
6
7
7,1
8
9
9,1
211000
214002
211032
211031
211151
210010
210009
210008
210007
210096
211121
211124
Mill housing
Reinforcement liner
Fan wing
Grinding chamber
2.5 mm screen
3.0 mm screen
3.5 mm screen
4.0 mm screen
4.5 mm screen
Rotor complete (old No. 211003)
Hammer set Hardox 500 complete with bolts,
screws, and distance rings
Please also see hammer mill BM-2
May 2013/PR/AB
145
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing – mixer for PICCOLO
May 2013/PR/AB
146
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing – hammer mill for PICCOLO
May 2013/PR/AB
147
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TOMAL PROPORTIONER, OLD MODEL (taken out of
production)
2
3
7
8
11
14
15
16
17
18
20
21
22
25
811007
811009
811008
811010
814002
814003
811013
814015
813001
814016
814017
814018
6004103
811029
6205053
6205055
2391001
2391025
2391009
2391002
2383047
816112
811030
6407045
Auger right 32 mm
Auger right 50 mm
Auger left 32 mm
Auger left 50 mm
Counter weight
Stop ring
Motor flange
Handle
Inspection window
Cog wheel for auger, 16 teeth (2)
Cog wheel, big, 35 teeth
Cog wheel for motor, 7 teeth
Screw for cog wheel for motor
Gear motor
Pipe pin, short, 4x30
Pipe pin, long, 4x45
Carbon for gear motor without cable (2)
Carbon new model SD11/SD12 with cable (2)
Carbon, most recent (since 1997) (2)
Spring for carbon (2)
Timer
Omron micro switch
Terminal box LK
Bearing
TOMAL PROPORTIONER, VERY OLD MODEL (taken out of
production)
814005
814006
811001
814007
811002
814008
814021
May 2013/PR/AB
Bearing
Auger right 32 mm
Auger right 50 mm
Auger left 32 mm
Auger left 50 mm
Stop ring for auger
Double cog wheel (35 and 7 teeth)
148
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing TOMAL proportioner old model
(taken out of production)
May 2013/PR/AB
149
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TOMIX FINE PROPORTIONER TYPE 2/63
9
10
14
17
100
101
102
103
104
105
106
107
108
811051
811052
814016
6205055
6004103
816151
6003331
6001170
1400127
811054
6000430
6000918
6001170
816146
811053
816145
Auger right 32 mm
Auger left 32 mm
Cog wheel for auger (2)
Pipe pin Ø 4x45 mm
Allen screw (2)
Cog wheel for motor, 7 teeth
Machine screw M5x50
Spring washer 5 mm
Revolution guard
Attachment for revolution guard
Set screw M5x10
Nut M5
Spring washer 5 mm
Distance disc
Cog wheel for instantaneous load, 24/7 teeth
Cog wheel, 24 teeth
TOMIX PROPORTIONER TYPE 40/1300
9
10
12
14
16
17
20
22
23
25
28
31
36
50
811048
811049
6407045
814016
816150
6205055
811055
816149
816170
816138
816139
816133
2392002
6407044
Auger right 50 mm
Auger left 50 mm
Bearing (2)
Cog wheel for auger, 16 teeth (2)
Coupling half
Pipe pin Ø 4x45 mm
Gear motor
Coupling half
Parallel key A3 x 3 x 20
Throttle
Inspection window (2)
Empty indicator arm
Micro switch
Bearing (2)
2391025
Carbon for SD11 and SD12 TOMIX motor
(8x8 mm with conductor)
May 2013/PR/AB
150
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing TOMIX proportioner and fine proportioner
May 2013/PR/AB
151
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TOMIX PROPORTIONER TYPE 125/2000
9
10
12
14
15
17
24
28
31
36
44
46
47
48
49
50
52
54
811048
811049
6407045
814016
6205053
6205055
6004103
816139
816133
2392002
6407044
6900001
875008
835035
871002
816283
871004
871003
May 2013/PR/AB
Auger right, 50 mm
Auger left, 50 mm
Bearing (2)
Gear wheel for auger (2)
Split pin Ø 4x30 mm
Allen screw M4x6
Empty indicator arm
Micro switch
Bearing (2)
Gear wheel, 7 teeth (old No. 854003)
Gear wheel, 35 teeth
Parallel key A4x4
Gear motor
Gear wheel, 24 teeth (old No. 811083)
152
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
153
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TOMIX PLANT – FAT MIXER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
701000
701004
705014
705015
705016
701003
6000921
6001182
705018
6000447
6001171
6001182
6407064
6000447
6001171
6001182
705021
2520036
705022
701002
6001182
6001171
705019
6000921
6001172
2320062
6000458
6001172
6002005
6000921
701001
705020
6001036
6001171
6802093
May 2013/PR/AB
Fat mixer
Auger for fat mixer
Pipe
Shaft pin, inlet end
Shaft pin, outlet end
Palette (36)
Nut M10 (36)
Locking screw 10 mm (36)
Loose end plate
Set screw M8x20 (4)
Nut M8
Bearing PFT 25 FM (2)
Set screw M8x20 (4)
Nut M8 (4)
V-belt pulley A200-2
V-belt A36 (2)
V-belt pulley A71-2
Belt guard
Nut M8 (2)
Motor plate
Nut M10 (8)
Tension disc 10 mm (4)
Nut M10 (4)
Inspection flap
Locking device (4)
Wing nut M8 (4)
Union 3/8”
154
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 070-9000
May 2013/PR/AB
155
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SKIOLD FEEDTRONIC
BELT WEIGHER TYPE 2000
1
2
4
5
7
9
11
15
16
20
22
23
24
25
26
28
31
32
33
35
37
38
811057
811058
7004462
2380137
816207
816301
816198
816202
816203
816204
816195
816196
6408069
816197
6407008
816200
6305005
6301065
816208
6900055
816211
1400127
7004460
May 2013/PR/AB
Side plate
Weigh bridge
Insulation washer (8)
Load cell
Weight distributor
Spring (4)
Rubber flap 2 mm (2)
Scraper for belt, outside
Spring for scraper
Scraper for belt, inside
Driving roller
Pressure roller
0-ring (4)
Bearing housing (2)
Ball bearing (4)
Felt (2)
Cogwheel ½” x 3/8” (2)
Circlip spring ring (2)
Chain ½” x 3/8”
Joint ½” x 3/8”
Tension roller
Revolution guard
Transport belt
156
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing – belt weigher, type 2000
May 2013/PR/AB
157
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
BELT WEIGHER INDUSTRY TYPE 10000
2
3
4
5
7
10
11
12
13
14
17
18
19 +
21-24
25
28
29
30
31
32-33
34
35
38
44
45
46
49
50
53
54
811070
811071
811072
811073
811075
811078
811079
811080
811081
811066
816310
816311
816266
Weigh bridge
Bridge plate (2)
Cover with inlet
Outlet
Inside scraper
Outside scraper
Support plate for intermediary bearing
Guide for bearing housing (4)
Test tube
Revolution guard
Driving roller
Pressure roller
Felt guide
816269
816273
816274
816276
816277
816278
816279
816280
816197
2380137
2381180
2381181
6407008
6408069
7004459
7004462
Thread for bridge plate (4)
Felt for belt weigher industry (2)
Spring for outside scraper
Spring for guide shafts (4)
PVC block
Set centre nuts
Threaded bar
Pressure spring
Bearing housing (4)
Load cell
Cable bracket (4)
Cable binder (7)
Ball bearing (4)
0-ring (17)
Transport belt
Insulation washer (6)
May 2013/PR/AB
158
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 810046 – belt weigher, type 10000
May 2013/PR/AB
159
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
TOMIX PROPORTIONER TYPE INDUSTRY 2/63
2
3
7
8
9
10
15
41
42
43
44
48
49
50
51
52
54
55
56
72
73
74
75
76
77
78
79
80
811048
811049
826041
6407045
6407044
814016
816139
6000436
6001174
6000429
6001170
6000436
6001174
6205055
6205053
6004103
6003626
6003427
6302011
816151
811053
816145
811050
811055
816170
875013
6000429
6001170
May 2013/PR/AB
Auger right, 50 mm
Auger left, 50 mm
Bearing housing
Bearing GYE 20 KRRB
Bearing YAR-2FF
Inspection window
Set screw M6x16
Spring washer 6 mm
Set screw M5x12
Spring washer 5 mm
Set screw M6x12
Spring washer 6 mm
Allen screw M4x6
Wing screw M6x8
Machine screw M6x12
Bakelite ball
Cogwheel, 7 teeth
Gearwheel with instantaneous release
Cogwheel, 26 teeth
Motor bracket
Gear motor
Parallel key A3 x 3 x 20
Tension disk 30 mm
Set screw M5x12
Spring washer 5 mm
160
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 879000 – TOMIX Industry 2/63
May 2013/PR/AB
161
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
2
3
4
6
7
8
9
10
12
13
15
41
42
43
44
48
49
50
51
52
54
55
56
57
58
69
811048
811049
871001
871002
826041
6407045
6407044
814016
6900001
835035
816139
6000436
6001174
6000429
6001170
6000436
6001174
6205053
6205055
6004103
6003626
6003427
6302011
6003326
6000918
811083
May 2013/PR/AB
Auger right, 50 mm
Auger left, 50 mm
Motor bracket
Gear motor
Bearing housing
Bearing GYE 20 KRRB
Bearing YAR-2FF
Gear wheel steel, 7 teeth (old No. 854003)
Parallel key
Inspection window
Set screw M6x16
Spring washer 6 mm
Set screw M5x12
Spring washer 5 mm
Set screw M6x12
Spring washer 6 mm
Allen screw M4x6
Wing screw M6x8
Machine screw M6x12
Bakelite ball
Machine screw M5x10
Nut M5
Cogwheel, 24 teeth
162
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 879001 – TOMIX type Industry 40/1300
May 2013/PR/AB
163
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
2
3
4
6
7
8
9
10
12
13
15
41
42
43
44
48
49
50
51
52
54
55
56
70
71
811048
811049
871001
871002
826041
6407045
6407044
814016
6900001
835035
816139
6000436
6001174
6000429
6001170
6000436
6001174
6205053
6205055
6004103
6003626
6003427
6302011
871003
871004
May 2013/PR/AB
Auger right, 50 mm
Auger left, 50 mm
Motor bracket
Gear motor
Bearing housing
Bearing GYE 20 KRRB
Bearing YAR-2FF
Gear wheel, nylon, 16 teeth
Gear wheel, steel, 7 teeth (old No. 854003)
Parallel key
Inspection window
Set screw M6x16
Spring washer 6 mm
Set screw M5x12
Spring washer 5 mm
Set screw M6x12
Spring washer 6 mm
Allen screw M4x6
Wing screw M6x8
Machine screw M6x12
Bakelite ball
Cogwheel, 30 teeth
Cogwheel, 13 teeth
164
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
165
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
2
3
4
5
6
7
8
9
10
11
12
13
14
15
20
21
22
23
24
25
26
27
28
29
30
31
32
33
41
42
43
44
50
51
52
56
59
58
811048
811049
871001
811082
871002
826041
6407045
6407044
814016
875008
6900001
835035
875005-5
816139
813040
814029
814030
814032
814034
816271
875006
875007
816211
1116027
816281
6407008
6301065
6900055
6000436
6001174
6000429
6001170
6205053
6205055
6004103
6302011
6205072
6004117
May 2013/PR/AB
Auger right, 50 mm
Auger left, 50 mm
Motor bracket
Connection
Gear motor
Bearing housing
Bearing GYE 20 KRRB
Bearing YAR-2FF
Cogwheel, nylon, 16 teeth
Cogwheel, nylon, 7 teeth
Gear wheel, steel, 7 teeth (old No. 854003)
Parallel key
Throttle
Inspection window
Hub
Sprocket wheel with pin, ½” x 1/8”, 12 teeth
Bearing housing
Chain, 25 links
Chain, 65 links
Tension roller
Threaded rod 6 x 20 mm
Guard
Ball bearing RAE 12 NPP
Circlip
Connection link
Set screw M6x16
Spring washer 6 mm
Set screw M5x12
Spring washer 5 mm
Allen screw M4x6
Bakelite ball
Allen screw M5x8
166
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
167
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SCREEN CLEANER – drawing 209032
0
1
4
7
8
9
11
12
13
14+17
15
16+19
20
23
30
31
201206
1511091
2430090
1515057
1515058
206315
6404040
6407071
6407072
6000459
6405074
6001015
6000456
6301060
2430091
1515233
May 2013/PR/AB
Eccentric shaft complete
Eccentric shaft
V-belt pulley Taperlock
Suspension belt (2)
Oscillation belt (3)
Bearing housing (2)
Spherical ball bearing (2)
Ball bearing (2)
Bearing housing half (4)
Steel set screw (20)
Split bushing for bearing (2)
Lock nut (20)
Steel set screw (4)
Seger circlip ring (2)
Taperlock bushing for V-belt pulley
Bushing for oscillation belt (12)
168
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SCREEN CLEANER – drawing 209033
9
10
21
22
29
1515057
1515058
6000459
6001015
1515233
May 2013/PR/AB
Suspension belt (4)
Steel set screw (4)
Steel lock nut (4)
169
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRAW CUTTER TYPE BM, 7.5 KW
2
4
5
6
7
13
14
15
16
17
18
19
20
21
22
23
24
25
28
29
6004006
6001169
6000922
6306052
6000465
6001169
211000
213008
6000445
6001171
211030
6004005
6205063
211031
6000454
6001172
211151
214001
6004177
291123
294000
6000437
6001174
6000919
295001
298650
6004190
6002002
298122
298649
6001171
6004192
298159
298160
291237
May 2013/PR/AB
Spring washer M12 FZB (4)
Nut M12 FZB (4)
Set screw M12x20 FZB (4)
Housing
Blind plate
Wings, 1 set = 4 pcs.
Spiral split M8x12 (3)
Grinding chamber
Grinding bridge
Allen screw M8x12 MK (3)
Straw rotor complete
Machine knife (12)
Set screw M6x15 8.8 FZB (36)
Nut M6 8.8 FZB (36)
Cutting knife (8)
Disc (8)
Allen screw (8)
Tension disk M8 FZB (8)
Knife for straw rotor (2)
Retaining plate (2)
Allen screw (6)
Plate for pre-cutter
Tension disk
Set of knives
170
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing straw cutter BM, 7.5 kW
May 2013/PR/AB
171
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRAW CUTTER TYPE CM, 11 KW
2
3
10
12
13
14
15
16
17
20
21
22
23
24
25
26
28
31
221076
221081
6000445
6001171
220017
221072
6000454
6001172
224019
221158
224020
6004177
290025
221003
221124
291112
295001
298650
6002002
6004190
6001014
298108
291111
294000
6000437
6000919
6001174
6000409
6001173
291109
220042
6801027
291235
May 2013/PR/AB
Motor mounting
Housing
Fan complete, 4-winged
Grinding chamber
Distance ring
Grinding bridge
Allen screw M8x12 FZB (3)
Screen 30 x 30 mm
Rotor complete
and distance rings
Pre-cutter complete
Cutting knife (8)
Tension disk (8)
Tension disk M8 FZB (8)
Allen screw (8)
Lock nut M8 FZB (8)
Knife
Pre-cutter complete
Machine knife (2)
Steel bolt M6x15 FZB (6)
Steel nut M6 FZB (6)
Bolt M16x110 FZB
Spring washer M16 FZB
Suction chute
Tractor lift suspension
Gear box
Set of knives
172
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing straw cutter type CM, 11 kW
May 2013/PR/AB
173
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRAW FINE CUTTER TYPE CM, 11 KW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
18
19
20
21
22
23
24
26
27
28
221076
6306052
6000465
6001169
6000445
6001171
213008
221081
6004010
6000923
6001173
224019
6205063
6004005
221027
291199
221072
221158
291222
294000
291223
6004003
294000
6000437
295001
298650
6001171
6004190
298122
298080
6001173
6000409
298159
290025
May 2013/PR/AB
Support
Set screw (4)
Spring washer (4)
Blind plate
Housing
Allen screw (4)
Nut (4)
Spring washer (4)
Distance ring
Spiral split (8)
Allen screw (8)
Loose wings (4)
Fan with fly wheel, 4-winged
Grinding chamber
Rotor for fine cutter, complete
Machine knife (36)
Knife bolt (6)
Screw M6x16 MK (6)
Machine knife (4)
Set screw (12)
Cutting knife (8)
Tension disc (8)
Spring washer (8)
Bolt (8)
Knife (2)
Tension disc
Spring washer
Bolt M16x110
Plate
Screen 30x30 mm
174
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing fine cutter CM, 11 kW
May 2013/PR/AB
175
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRAW CUTTER TYPE JIK TURBO
13
14
15
16
17
20
21
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
39
40
41
43
44
45
46
47
48
49
50
51-52
54
55
56
57
1601580
1604050
6302011
1604110
6900219
6900218
6900217
2310520
1604100
1604260
1604080
2700028
1601171
1604070
1601570
1604090
1604060
2520062
1604030
1604250
1601590
1601760
1601770
1601780
132003
1603500
1601600
1601380
1603510
1602540
6001172
1603740
1602550
1601710
1601720
6000416
6000417
6000419
6001147
1601810
1601400
6407061
1601730
1604320
6000467
1604400
1601360
May 2013/PR/AB
Air throttle
Air regulation arm
Bakelite ball
Wheel shaft
Wheel Ø 16” (2)
Fork
Wheel Ø 10”
Engine 8.5 kW, petrol
Motor plate
Distance bushing (4)
Coupling arm
Rigging screw
Tension roller
Rocker arm
Bearing socket
Belt pulley A-1-90
Belt-pulley A-1-225
V-belt Roflex Special A-62
Rotor shaft
Parallel key ¼”
Rotor Ø 25
12 short hammer knives (for cutter with screen)
4 short hammer knives (for cutter without screen)
8 long hammer knives (for cutter without screen)
Hammer bolt (4)
Distance ring (8)
Shredding disc, petrol (3.2 mm)
Shredding disc, electric motor, 5 mm
Centre knife, petrol
Centre knife, electric motor
Washer for centre bolt
Centre bolt 3/8 WGL, petrol, left-hand thread
Shredder knife (2)
2 straw throwers, petrol
2 straw throwers, electric motor
Steel bolt M8x10 10.9 (2)
Tension disc M8 (4)
Grinding chamber
Bracket for grinding chamber (4)
Bearing INA PMEY-25
Gas regulation
Striking plate, electric motor
Bolt M12x35, electric motor
Clamp for leg, long
Rotor Ø 38
176
SPARE PARTS LIST
POS.
ITEM NO.
58
60
1604410
2320094
79
1600230
1600240
1600280
1600141
2310508
81
1601034
1601035
1601037
1601038
DESCRIPTION
Clamp for leg
Electric motor 5.5 kW
Fixation bolt M6x16 (2)
Screen 60 x 30 mm
Screen 30 x 30 mm
Screen 90 x 30 mm
Legs (4)
Air filter for Honda GXV340, new model
Air filter for Honda GV400, old model
Straw thrower, shredder knives, centre knives
and bolts for petrol
Same for electric motor
Hammers, hammer bolts, striking plate, distance
rings and bolts for shredders with screen
Same for shredders without screen
Spare parts drawing cutter type JIK TURBO
May 2013/PR/AB
177
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing cutter type JIK TURBO
May 2013/PR/AB
178
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRAW SHREDDER TYPE JIK CLEAN
38
42
44
90
104
106
108
112
120
122
124
126
128
130
132
138
160
162
164
166
168
170
172
174
176
178
180
198
230
234
235
1603710
2320095
6407063
6000478
1601360
121001
1601380
1601400
1601530
1603480
1601760
1601770
1601780
1603500
1603510
914031
1603520
183005
1603740
1602550
1601720
1604510
1604790
2700028
1601171
2530066
6802143
2700085
6802141
6802142
6004189
6000416
6000416
6000416
1601033
1601037
May 2013/PR/AB
Tension spring for hatch
Flange bearing 25 mm
Set screw M12 x 150 (2)
Rotor
Hammer bolt (4)
5 mm shredder plate
Bracket (4)
Screen 90 x 30 mm
Rotor shaft 40 mm
12 short hammer knives (for cutter with screen)
4 short hammer knives (for cutter without screen)
8 long hammer knives (for cutter without screen)
Distance ring (8)
Centre knife
Intermediary ring for rotor shaft
Centre bolt with left-hand thread
Shredder knife
Set straw thrower
Flange bearing 40 mm (3)
Brush for paper shredding (4)
Rigging screw (2)
Tension roller
V-belt B-66 (2)
Air hose 1.5 m
Grease nipple (3)
Single union (6)
Bulkhead passage (3)
Allen screw M6 x 8 MK (4)
Screw M8 x 10 St. 10.9 (2)
Screw M8 x 10 St. 10.9 (4)
Screw M8 x 10 St. 10.9 (2)
Straw thrower, shredder knives, centre
knives and bolts
Hammers, hammer bolts, striking plate,
distance rings and bolts
179
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing No. 1609150 – shredder type JIK CLEAN
May 2013/PR/AB
180
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
181
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
182
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
DUST SEPARATOR TYPE SP1000
43
44
45
46
49
8100003
8100004
8100005
8100006
1850003
Dust filter
Filter belt
Sack belt
Plastic bag
Multiflex hose 120 mm
Spare parts drawing
May 2013/PR/AB
183
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
STRAW SHREDDER TYPE JIK WIND
2
4
8
14
16
18
20
26
28
30
32
34
36
38
40
42
44
66
68
122
126
132
148
170
180
192
194
1601000
1601024
1601040
1601070
1601250
1601080
1601090
1600044
1602470
1602480
1602660
1602490
1601170
1601170
1602510
1602520
1602530
1602540
1602550
1601740
6302009
6000464
6900220
2320068
6801015
2320069
1602680
216114
1602880
6205020
1604360
1810067G
1820028
1601036
1601032
May 2013/PR/AB
Housing
Inlet hopper
Loose wheel shaft
Rotor hub 7.5 kW PTO
Rotor hub 11 kW
Top plate for rotor
Centre plate 7.5 kW PTO
Screen 30x30 mm
Bottom plate for rotor
Centre bolt 7.5 kW PTO
Centre bolt 11 kW
Small fan wings, 7.5 kW, set
Big fan wings 7.5 kW with screws
Big fan wings 11 kW PTO with screws (2)
Hammer bolt (6)
Distance ring (24)
Hammer knives, set consisting of 18
Centre knife
Shredder knives (2)
Straw thrower, set
Hand wheel
Steel set screw (4)
Rubber wheel (2)
Angle gear PTO
Motor 11 kW 1500 rpm
Centre disc 11 kW
Centre disc 7.5 kW PTO
Centre disc PTO
Tractor split (2)
Parallel key
Connection
Ø 150 mm clamp
Hammer set complete with hammers, hammer bolts,
striking plate, distance rings and bolts
Straw thrower, shredder knives,
centre knives and bolts
184
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing shredder type JIK WIND
May 2013/PR/AB
185
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
186
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
May 2013/PR/AB
187
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SCREEN CLEANER, OLD MODEL
1511150
201225G
201220G
201226G
201221G
201227G
201217G
201228G
201218G
201229G
201204G
201230G
201219G
201231G
Screen
Screen
Screen
Screen
Screen
Screen
Screen
Screen
Screen
Screen
Screen
Screen
Screen
Screen
1511152
1511107G
201239G
Screen lower Ø 1.5 x 20 mm (standard) (1)
Screen lower Ø 2 x 20 mm ( 1)
Screen lower Ø 2.5 x 20 mm (1)
May 2013/PR/AB
upper
upper
upper
upper
upper
upper
upper
upper
upper
upper
upper
upper
upper
upper
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
6 mm (1)
6 mm, divided (2)
8 mm (1)
8 mm, divided (2)
10 mm (1)
10 mm, divided (2)
4 x 20 mm (1)
4 x 20 mm, divided (2)
6 x 25 mm (1)
8 x 25 mm (1)
10 x 30 mm (1)
188
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
0
1
4
7
8
9
11
12
13
14+17
15
16+19
20
23
30
31
Eccentric shaft complete (1)
Eccentric shaft (1)
V-belt pulley taperlock (1)
Suspension belt (2)
Bearing housing (2)
Spherical ball bearing (2)
Ball bearing (2)
Bearing housing half (4)
Steel set screw (20)
Split bushing for bearing (2)
Lock nut (20)
Steel set screw (4)
Seeger circlip ring (2)
Taperlock bushing for V-belt pulley (1)
201206
1511091
2430090
1515057
1515058
206315
6404040
6407071
6407072
6000459
6405074
6001015
6000456
6301060
2430091
1515233
May 2013/PR/AB
189
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SCREEN CLEANER (drawing 209033)
9
10
21
22
29
1515057
1515058
6000459
6001015
1515233
1515208
201194
May 2013/PR/AB
Suspension belt (4)
Steel set screw (4)
Steel lock nut (4)
Rubber lap for cover plate (1)
Bottom hopper (plate) (1)
190
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SCREEN CLEANER, NEW MODEL
8
10
11
12
24
26
27
28
29
30
47
48
49
50
206403
206405
206406
206407
2340133
2420076
2430124
2430120
2430121
2430122
6407055
6407056
6407098
1515057
Eccentric (4)
Connecting plate right (2)
Connecting plate left (2)
Tension spring (4)
Motor 0.55 kW, 900 RPM (1)
Taperlock 1610 ø 30 (1)
Taperlock 1210 ø 19 (1)
Belt pulley SPZ140-2-2012 (1)
Belt pulley SPZ 75-2-1210 (1)
V-belt SPZ 1287 (1)
Flange bearing (2)
Flange bearing housing (8)
Bearing GE 50 KRRB (4)
Suspension belt (8)
Upper Screen:
200116
201255
201256
201257
201271
201272
201273
201258
201259
201260
201261
Complete screen frame upper with cleaning balls
without screen (2)
Screen ø 6 (1)
Screen ø 8 (1)
Screen ø 10 (1)
Screen ø 13 mm (1)
Screen ø 15 mm (1)
Screen ø 20 mm (1)
Screen oblong ø 4 x 20 (1)
Lower Screen:
200116
201268
201269
201252
201253
201254
Complete screen frame lower with cleaning balls
without screen (2)
Screen ø 1 mm (1)
Screen ø 1.5 mm (standard for grain) (1)
Screen ø 1.5 x 20 (1)
Screen ø 2.0 x 20 (1)
Screen ø 2.5 x 20 (1)
Note: Screen frames for upper and lower screens are the same, but at mounting
of screens on the upper screen frame, an extension plate should be mounted,
ensuring that overflows are led to outlet for overflow.
May 2013/PR/AB
191
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Spare parts drawing screen cleaner, new model
May 2013/PR/AB
192
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
BUCKET ELEVATOR
SKIOLD Elevator D133
Pos. Description
1
2
3
4
5
9
10
12
13
17
21
24
25
27
28
29
33
34
38
39
40
41
Code no.
Inspection tube L = 2450 mm
Elevator tube L = 2450 mm (std. 1,5 mm sheet)
Explosion discharge, elevator tube
Fittings for elevator tube, ladder etc.
Distance plate for elevator tube
Outlet Q16, elevator head
Outlet hopper Ø150, elevator head
Elevator head (DXC 302)
End plate w. explosion discharge elevator head
Oblique running guard, elevator head
Revolution guard, elevator foot
Elevator foot
Inlet Q16, elevator foot
Inlet Ø150, elevator foot
Double inlet, elevator foot
Extra inlet, elevator foot
Adjusting throttle for inlet, elevator foot
Cleaning trap with compressed air, elevator foot
Belt D133, 9 buckets/meter
Belt fastener D133
Bucket D133
Bolt M7X25
Belt tension device
May 2013/PR/AB
193
115 00 05
115 00 06
115 00 07
115 00 08
115 00 09
115 10 75
115 52 65
115 51 83
115 10 83
115 10 82
115 00 03
115 10 73
115 10 22
115 10 23
115 00 04
115 10 83
115 10 80
115 10 79
115 10 81
115 10 66
115 10 77
115 10 76
282 50 00
282 50 01
115 11 29
282 00 00
282 00 06
115 10 61
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Pos.
Description
Code no.
1
115 10 14
2
115 10 15
3
115 10 17
4
115 10 18
5
115 10 19
6
Elevator tube L = 2450 mm (spec. 2 mm sheet)
115 10 45
7
115 10 46
8
115 10 47
9
115 10 53
10
115 10 34
11
Dust collection
115 10 20
12
115 50 62
13
115 10 44
14
115 10 41
17
115 10 43
18
115 10 42
21
115 00 00
22
115 00 02
24
End plate w. explosion discharge, elevator head
115 10 52
25
115 10 22
26
Rain cover for motor, elevator head
115 10 40
27
115 10 23
28
Elevator foot
115 00 01
29
115 10 54
30
115 10 32
33
115 10 26
34
115 10 25
35
115 10 27
38
115 10 29
39
115 10 30
40
115 10 31
41
115 10 33
Belt D200I, 8,5 buckets/meter
282 50 02
Belt D200I, 10,5 buckets/meter
282 50 03
Belt D200I, 14 buckets/meter
282 50 04
Belt D200II, 6,5 buckets/meter
282 50 05
Belt D200II, 8 buckets/meter
282 50 06
Belt D200II, 10,5 buckets/meter
282 50 07
Belt fastener D200I
115 11 30
Belt fastener D200II
115 11 31
Bucket D200I
282 00 01
Bucket D200II
282 00 02
Bucket bolt D200I, M8x25
282 00 05
Bucket bolt D200II, M8x25
282 00 07
Belt tension device
115 10 12
May 2013/PR/AB
194
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Pos. Description
1
2
3
4
5
9
10
11
12
14
15
18
19
21
22
25
26
27
28
30
31
35
36
38
39
40
41
Code no.
Dust collection
Elevator foot
Belt D260, 5,5 buckets/meter
Belt D260, 8,5 buckets/meter
Belt fastener D260
Bucket D260
Bucket bolt M8x25
Belt tension device
May 2013/PR/AB
195
115 00 14
115 00 15
115 00 16
115 00 17
115 00 18
115 11 06
115 52 65
115 11 03
115 52 62
115 11 18
115 11 19
115 11 04
115 11 17
115 00 11
115 00 12
115 10 22
115 11 26
115 11 68
115 00 13
115 11 12
115 11 13
115 11 10
115 11 11
115 11 15
115 10 97
115 11 08
115 11 07
282 50 08
282 50 09
282 50 10
115 11 32
282 00 03
282 00 07
115 10 92
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Pos. Description
1
2
3
4
5
6
7
8
9
10
11
12
15
16
19
20
22
23
24
25
26
27
28
31
32
36
37
38
39
40
41
42
43
Code no.
Elevator tube L = 2450 mm (spec. 3,0 mm sheet)
Dust collection
Outlet hopper Q30, elevator head.
End plate with explosion relief, elevator head.
Elevator foot
Inlet Q30, elevator foot.
Inlet Ø300, elevator foot.
Transition explosion relief
Explosion sensor bracket
Belt D390 4,5 buckets/meter
Belt D390 6 buckets/meter
Belt D390 7 buckets/meter
Bucket D390
Belt fastener D390
Bucket bolt D390 M10x30
Belt tension device
May 2013/PR/AB
196
115 11
115 11
115 11
115 11
115 11
115 11
115 11
115 11
115 11
115 11
115 11
115 53
115 11
115 11
115 11
115 00
115 00
115 11
115 11
115 11
115 00
115 11
115 11
115 11
11511
11511
23800
28250
28250
28250
28200
11511
28200
11511
70
69
61
59
57
62
60
58
52
71
66
63
41
74
40
22
25
52
72
63
23
42
75
43
64
53
04
11
13
12
04
73
08
36
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Gear and Motors
Gear
DXC302/10,35/200-24
DXC352/11,54/250-28
DXC452/11,5/300-38
DXC452/13,14/300-38
DXC552/12,81/350-42
DXC552/14,26/350-48
DXC652/14,27/400-55
Code no.
6801011
6801012
6801028
6801034
6801013
6801029
6801026
E-motors, 1400 RPM, B5
1.1 kW (200-24)
2320087
1.5 kW (200-24)
2320085
2.2 kW (200-24)
2340077
2.2 kW (250-28)
2320030
3 kW (250-28)
2320029
4 kW (250-28)
2320093
5.5 kW (300-38)
2320094
7.5 kW (300-38)
2320095
11 kW (350-42)
2320070
15 kW (350-42)
2320071
18.5 kW (350-48)
2320072
22 kW (350-48)
2320017
30 kW (400-45)
2340062
May 2013/PR/AB
197
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Head D133 (1150003)
May 2013/PR/AB
198
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Head D200 (1150001 for DXC352)
May 2013/PR/AB
199
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Head D200 (1150003 for DXC452)
May 2013/PR/AB
200
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Head D260 (1150011 for DXC452)
May 2013/PR/AB
201
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Head D260 (1150012 for DXC552)
May 2013/PR/AB
202
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Head D390 (1150022 for DXC552)
May 2013/PR/AB
203
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Head D390 (1150025 for DXC652)
May 2013/PR/AB
204
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Foot D133 (1150004)
May 2013/PR/AB
205
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Foot D200 (1150001)
May 2013/PR/AB
206
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Foot D260 (1150013)
May 2013/PR/AB
207
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Foot D390 (1150023)
May 2013/PR/AB
208
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
CHAIN CONVEYOR
SYSTEM SURVEY
May 2013/PR/AB
209
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
SKIOLD Chain Conveyor DK190
Pos. Description
1
2
3
4
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
39
40
43
44
47
48
51
52
55
56
Code no.
Driving section with steel bottom – DK190
Driving section with Nonfric bottom – DK190
Driving section (DXC 452) with steel bottom – DK190
Driving section (DXC 452) with Nonfric bottom – DK190
Tension section with steel bottom – DK190
Tension section with Nonfric bottom – DK190
Intermediate section with steel bottom L=2400 – DK190
Intermediate section with Nonfric bottom L=2400 – DK190
Intermediate section with steel bottom/capacity throttle L=400 – DK190
Intermediate section with Nonfric bottom/capacity throttle L=400 – DK190
Capacity throttle for chain conveyor – DK190
Reverse pulley complete, DK190
Brush for chain conveyor – DK190
Revolution guard with protection – DK190/250
Return plate complete with wearing rail L= 2000 – DK190
Raised inlet for return bottom – DK190
Raised inlet for return bottom without throttle DK190
Hopper section with steel bottom L=1000 – DK190
Hopper section with steel bottom L=2000 – DK190
Gable plate for hopper section with steel bottom 45° – DK190
Hopper section with steel bottom 60° L=1000 – DK190
Overlap plate inlet Ø150 - DK190
Inlet Q16 – DK190
Inlet Q20 – DK190
Outlet hopper Ø150 sym. - DK190
Outlet hopper Q16 sym. – DK190
Outlet hopper Q20 sym. – DK190
Outlet hopper Ø150 end model – DK190
Outlet hopper Ø200 end model – DK190
Leg for chain conveyor – DK190
Leg H = 300 – 400 for chain conveyor – DK190/250
May 2013/PR/AB
210
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
00
00
00
00
00
00
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11
10
11
10
11
10
11
10
11
10
10
11
00
02
04
05
01
03
09
10
11
12
13
14
15
16
17
18
26
27
23
04
37
43
22
19
35
30
29
34
33
31
32
29
07
27
40
30
06
28
38
31
39
41
10
SPARE PARTS LIST
POS.
ITEM NO.
57
66
58
59
60
61
62
63
64
65
67
68
DESCRIPTION
Leg H = 600 - 1000 for chain conveyor – DK190/250
Leg H = 1000 –1400 for chain conveyor – DK190/250
Rain cover for gear motor – DK190/250
Rain cover for gear motor (Ø60 shaft gear DXC552) – DK250
End plate with shutter – DK190
End plate with shutter (top mounting)– DK190
Rain cover for end plate with shutter (top mounting)– DK190
Throttle (motor controlled) with steel bottom - DK190
Throttle (motor controlled) with Nonfric bottom - DK190
Throttle (manual) with steel bottom
Throttle (manual) with Nonfric bottom
Chain
Link
Scraper
Return bucket
May 2013/PR/AB
211
116
116
116
116
116
116
116
116
116
116
116
116
116
690
116
116
11
11
10
10
11
10
10
10
00
00
00
00
10
02
51
54
32
96
42
62
24
63
64
65
13
17
27
28
36
55
30
48
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Pos. Description
1
2
3
4
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
36
37
40
41
44
45
48
49
52
53
55
56
Code no.
Driving section with steel bottom – DK250
Driving section with Nonfric bottom – DK250
Intermediate with steel bottom L=2000 – DK250
Return plate complete with wearing rail L= 2000 – DK250
Raised inlet for return bottom without throttle L= 2000 - DK250
Inlet Q20 - DK250
Inlet Q24 - DK250
Outlet hopper Ø250 sym - DK250
Outlet hopper Q20 sym. - DK250
Outlet hopper Ø200 end model - DK250
Leg for chain conveyor - DK250
May 2013/PR/AB
212
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
00
00
00
00
00
00
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
10
11
11
11
11
11
06
08
11
12
07
09
70
71
72
73
74
75
76
77
78
79
87
88
84
05
98
43
83
80
96
91
90
95
94
92
93
05
06
03
04
07
08
99
00
01
02
09
10
SPARE PARTS LIST
POS.
ITEM NO.
57
66
58
59
60
61
62
63
64
65
67
68
DESCRIPTION
Leg H = 600-1000 for chain conveyor – DK190/250
Leg H = 1000 –1400 for chain conveyor – DK190/250
Rain cover for gear motor – DK190/250
Rain cover for gear motor (Ø60 shaft gear DXC552) – DK250
End plate with shutter - DK250
End plate with shutter (top mounting) - DK250
Rain cover for end plate with shutter (top mounting) - DK250
Throttle (manual) with steel bottom
Throttle (manual) with Nonfric bottom
Chain
Link
Scraper
Return bucket
May 2013/PR/AB
213
116
116
116
116
116
116
116
116
116
116
116
116
116
690
116
116
11
11
10
10
11
10
10
11
00
00
00
00
10
02
52
54
32
96
42
62
24
68
69
25
14
18
29
30
97
56
34
49
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Pos. Description
1
2
3
4
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
38
41
42
46
49
50
54
55
56
57
58
59
Code no.
Return plate complete with wearing rail= 2000 – DK320
Inlet Q24 - DK320
Inlet Q30 - DK320
Rain cover for gear motor – DK320
May 2013/PR/AB
214
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
00
00
00
00
00
00
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
10
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
23
24
25
26
21
22
37
38
39
40
41
42
43
44
45
46
71
72
68
34
33
43
67
64
79
98
75
78
77
99
76
60
59
62
61
57
63
58
86
87
88
89
95
SPARE PARTS LIST
POS.
ITEM NO.
61
62
63
64
65
66
DESCRIPTION
Leg H=600-1000 for chain conveyor – DK320
Chain
Link
Scraper
Return bucket
May 2013/PR/AB
215
116
116
116
116
116
116
116
690
116
116
11
11
11
00
00
11
11
02
54
54
83
84
85
15
19
97
90
57
18
50
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Pos. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
37
38
41
42
46
49
50
50a
54
55
Code no.
Return plate complete with wearing rail= 2000 – DK400
Inlet Q24 - DK400
Inlet Q30 - DK400
Outlet hopper Q30 end model – DK400
May 2013/PR/AB
216
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
00
-00
-00
-00
-12
-12
-12
-12
-12
-12
-12
12
11
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
-12
12
12
12
36
-32
-33
-34
-16
-45
-46
-17
-18
-49
-37
10
35
33
23
22
24
53
51
52
14
54
13
44
56
55
35
60
-30
62
61
32
SPARE PARTS LIST
POS.
ITEM NO.
56
57
57a
58
59
61
62
63
64
65
DESCRIPTION
Leg H = 300 – 400 for chain conveyor – DK400
Leg H = 600 - 1000 for chain conveyor – DK400
Rain cover for gear motor – DK400
Chain for 400-I L=2.5 m
Chain for 400-I L=5 m
Chain reinforced for 400-II L=2.5 m
Chain reinforced for 400-II L=5 m
Link for 400-I
Link for 400-II
Scraper
Return bucket
Gear and Motors
Gear type/i/constr.size
DXC352/39,67/200-24
DXC452/39,67/250-28
DXC552/38,75/300-38
DXC553/51,92/300-38
DXC603/65,84/300-38
DXC703/50,97/350-42
DXC803/64,05/350-42
DXC903/64,05/350-48
Code no.
6801020
6801021
6801022
6801037
6801038
6801039
6801040
6801041
Electric motors, 1400 RPM
B5
1.1 kW (200-24)
2320087
1.5 kW (200-24)
2320085
2.2 kW (250-28)
2320030
3 kW (250-28)
2320029
4 kW (250-28)
2320093
5.5 kW (300-38)
2320094
7.5 kW (300-38)
2320095
11 kW (350-42)
2320070
15 kW (350-42)
2320071
18.5 kW (350-48)
2320072
22 kW (350-48)
2320073
May 2013/PR/AB
217
116
116
116
116
116
116
116
116
116
116
116
116
116
116
690
690
116
116
12
12
12
12
12
12
--00
00
--12
12
-02
54
54
31
57
58
59
34
29
--16
20
--42
41
-58
19
51
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Driving Section
Spare parts for driving section
Pos.
2
2
2
2
3
5
10
10
15
15
15
15
15
18
18
18
Description (number)
Key f. Ø50 (1)
Key f. Ø60 (1)
Key f. Ø70 (1)
Key f. Ø80 (1)
Reverse pulley complete (1)
Bottom plate steel (1)
Bottom plate Nonfric (1)
Driving shaft f. gear DXC352
Taper lock Ø50 (1)
Taper lock Ø60 (1)
Taper lock Ø70 (1)
May 2013/PR/AB
(1)
(1)
(1)
(1)
(1)
DK190
1125070
1155048
1161004
1165027
1165028
1165152
1165171
2420086
-
218
DK250
1125070
6000233
1155048
1161005
1165177
1165178
1165237
1165238
2420086
2430104
-
DK320
6000227
6000238
1155048
1161134
1165423
1165424
1165410
1165433
2430094
DK400
6000233
6000238
2700057
1155048
1161210
1165486
1165558
1165482
SPARE PARTS LIST
POS.
ITEM NO.
18
18
30
30
31
31
31
32
32
32
32
32
33
33
33
33
DESCRIPTION
Taper lock Ø80 (1)
Taper lock Ø90 (1)
Vibration damper Ø40 (2)
Vibration damper Ø50 (2)
Cover for bearing Ø50 (1)
Cover for bearing Ø60 (1)
Cover for bearing Ø70 – Ø90 (1)
Flanged bearing Ø50 (2)
Transp.chain wh.f.Ø50 - Ø60 (1)
Transp.chain f. Ø70 (1)
Transp.chain wheel f. Ø80 (1)
Transp.chain wheel f. Ø90 (1)
May 2013/PR/AB
6306059
6401071
6401073
6900048
-
219
6306059
6401071
1165306
6401073
6401034
6900048
-
2430113
6306059
6306066
1165430
6407001
6407002
6900047
6900046
-
1165483
2430114
6306059
6306066
1165430
6407003
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Tension Section
Spare parts for tension section
Pos.
2
6
7
8
8
11
13
23
24
25
Bearing bracket (2)
Guide for bearing bracket (4)
Tension spindle (2)
Bottom plate steel (1)
Bottom plate Nonfric (1)
Shaft for chain wheel (1)
Taper lock (1)
Cover for bearing (2)
Flanged bearing (2)
Return pulley without teeth (1)
May 2013/PR/AB
DK190
1161008
1165043
1165051
1165045
1165046
1165052
2420086
6401071
6401073
6900041
220
DK250
1161008
1165043
1165051
1165188
1165189
1165192
2420086
6401071
6401073
6900041
DK320
1161008
1165043
1165051
1165412
1165413
1165416
2430094
6401071
6401073
6900042
DK400
1161212
1165043
1165051
1165498
1165502
2430113
1165515
6407002
6900067
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Intermediate Section
Spare parts for intermediate section
Pos. Description (number)
1 Reverse pulley (**)
*4 Wearing rail L=600 (1)
5 Guide rail L=600 (1)
7 Bottom plate steel L=600 (1)
7 Bottom plate Nonfric L=600 (1)
* Application only for steel bottom
** Number depending on type of extension
May 2013/PR/AB
DK190
1161004
1165086
1165079
1165072
1165065
1165058
1165087
1165080
1165073
1165066
1165059
1165084
1165077
1165070
1165063
1165056
1165085
1165078
1165071
1165064
1165057
221
DK250
1161005
1165086
1165079
1165072
1165065
1165058
1165087
1165080
1165073
1165066
1165059
1165211
1165207
1165203
1165199
1165195
1165212
1165208
1165204
1165200
1165196
DK320
1161134
1165342
1165335
1165328
1165321
1165314
1165343
1165336
1165329
1165322
1165315
1165340
1165333
1165326
1165319
1165312
1165341
1165334
1165327
1165320
1165313
DK400
1161210
1165530
1155524
1165570
1165537
1165518
1165531
1165525
1165569
1165538
1165519
1165529
1165523
1165571
1165566
1165517
-
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Capacity Adjustment
Spare parts for capacity adjustment
Pos. Description (number)
1 Capacity throttle (1)
*5 Wearing rail (1)
6 Guide rail (1)
9 Bottom plate steel (1)
9 Bottom plate Nonfric (1)
* Application only for steel bottom
May 2013/PR/AB
DK190
1161023
1165107
1165108
1165110
1165111
222
DK250
1161084
1165107
1165108
1165224
1165225
DK320
1161168
1165369
1165370
1165365
1165366
DK400
1161237
1165577
1165578
1165574
-
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Intermediate Bottom
Spare parts for intermediate bottom
Pos.
3
4
5
Wearing rail L=2000 (1)
Guide rail L=2000 (1)
Interm.bottom pl. L=2000 (1)
May 2013/PR/AB
DK190
1165065
1165066
1165097
223
DK250
1165065
1165066
1165218
DK320
1165321
1165322
1165378
DK400
1165537
1165538
1165539
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Outlet Throttle
Spare parts for outlet throttle
Pos.
1
1
2
3
10
17
19
20
41
42
43
45
Cover plate steel bottom (1)
Cover plate Nonfric bottom (1)
Cover plate Nonfric bottom (1)
Brush (1)
Shaft (1)
Electric motor (1)
End stop (2)
Worm gearing (1)
Tightening pin (2)
Flanged bearing (1)
Ball bearing (8)
Toothed bar (2)
May 2013/PR/AB
DK190
1165010
1165017
1165017
1161037
1165005
2340142
2385083
2391039
6205076
6401077
659000035
1165001
224
DK250
1165010
1165017
1165017
1161098
1165005
2340142
2385083
2391039
6205076
6401077
659000035
1165001
DK320
1165020
1165303
1165303
1161133
1165005
2340142
2385083
2391039
6205076
6401077
659000035
1165011
DK400
1165020
1165303
1165303
1161135
1165005
2340142
2385083
2391039
6205076
6401077
659000035
1165011
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Stow Indicator
Spare parts for stow indicator
Pos. Description
6
17
Code
no.
(number)
2385083 (1)
7004213 (2)
Switch
Hinge
May 2013/PR/AB
225
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
Chains, Links, Scrapers and Return Buckets
Spare parts, chain, link, scraper, return bucket
Pos. Description
DK190
Chain*
1161036
Link
6900255
5 Rubber scraper
1165130
Return bucket
1165448
* Chain supplied in pieces of 5 metres
May 2013/PR/AB
DK250
1161097
6900256
1165234
1165449
226
DK320
1161190
6900257
1165418
1165450
DK400 I
1165419
1165451
DK400 II
1161241
6900258
1165419
1165451
SPARE PARTS LIST
POS.
ITEM NO.
DESCRIPTION
COMPUTERS
6702190
2384008
Keyboard front P400/P600/P800
Plate behind keyboard front P400/P600/P800
Both must be replaced at the same time!
1400685
1400500
1400501
1400502
Alteration
Alteration
Alteration
Alteration
of
of
of
of
P500-4 to FlexMix
P400 to FlexMix
P600 to FlexMix
P800 to FlexMix
Replacement of load cells
The new type of load cells does not work together with the old type. This means
that you have to replace all 3 (or 4) load cells by:
1400686
May 2013/PR/AB
Load cell 2000 kg with 8 m cable and foot (3-4)
227

Spare part list

Transcription

Similar documents