Chapter 11 Illustrated Parts List.fm

11
Illustrated Parts List
11.1 Ordering Parts
For your convenience, replacement parts and accessories can be ordered
from ARPAC® by fax 24 hours a day. Please have the following
information available to ensure quick, easy, and accurate service.
• Your name and telephone number
• Your P.O. (Purchase Order) number
• Your preferred method of delivery
11.1.1 Replacement Parts Policy & Contact Information
Should a replacement part be needed, ARPAC®’s return material
authorization policy must be adhered to. ARPAC® will not distribute
equipment or parts without a purchase order from an authorized
ARPAC® distributor. This procedure includes warranty and nonwarranty replacement parts. A return authorization will be issued at that
time, and credit will not be issued until the suspect part has been received
and inspected. Call ARPAC® sales for the distributor in your area at (847)
678-9034.
ARPAC® Parts Contact Information
Phone: (847) 678-9034
Fax: (847) 678-2109
24 Hour Emergency Service: (800) 424-0545
[email protected]
Open for service Monday through Friday,
7:00 AM to 6:00 PM (Central Time)
11.1 Ordering Parts
11-1
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.2 How to Use This Parts List
11.2.1 General Part Numbers
This chapter contains all part numbers necessary to order 25TW-28 Tray
Wrapper replacement parts and assemblies.
This illustrated parts breakdown is presented in disassembled order.
Detail parts are shown below their respective upper level assemblies
whenever possible.
The parts lists follow the illustration for a particular assembly and
represent components of that assembly. The number listed in the quantity
column is the number of the specific part required to complete the
assembly and may not reflect the quantity needed for the entire system.
The lists are divided into four columns. The item/index numbers refer to
the identification number located on the drawing. The part number is the
Arpac part number, used to identify the part for ordering. The part
description column lists each part name, and the quantity column lists the
quantity of that part used in that particular assembly.
Illustrations are shown before the parts list for each assembly.
11-2
11.2 How to Use This Parts List
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.3 Recommended Spare Parts
Part Description
Arpac Part number
Assy, Sealbar, Polyethylene, 18" 18" Width
222016
Assy, Lug, TS37, HC37, Lug Height = 3 1/2
173409-000A
Belt-vs 1422v270 Gates,
811391
Cyl, Air, 1-5/8 Bore, 1 1/4 Stk, Square Compact
814363
Belt, 12 X 138 ID Skived Prepared 12" Wide Belt,
823242
Cyl, Air, Flat, 1 1/2 B, 4 1/4" Stk, Mod, Ts-37, Reb
120012-001
Pad, Silicone, 7 1/2 Lg,
184086
Cushion Adjustable .5 Id,
816415
Tape, Teflon Coated Fiberglass 2" X 18, Yd W/acrylic Adhesive
814516
Assy, Wheel, TS-37
119982
Wheel, Needle, 2" Od, 1" Lg, 1.5 Id 1/16 Lg Needles
142139
Cyl, Kit, Repair, Seal, 2 Bore
802013
Shock, Adj, 1/2 Bore X 2 Stroke, Air Over Oil
807598
Belt, Timing, .275w +0/-.015,
809969
Double Gearbelt, .390w +0/-.010,
809974
Spring, Comp, 0.180 Od X 9/16 Lg, 0.020 Ss Wire
809973
Assy, Wire, Hot, TS-37
137828-000B
Belt, Timing, 1/5 P, 1/4 W, 18 Lg,
801244
Assy, Spkt, Idl, 40b20, 3/4 IdD Ts-37n
119904
Belt, Timing, 0.0816 P, 1/4 W, 14.525 Lg
810415
List, Parts, Spare, Elec, Horizontals Models HC37/TS33
Clutch, Air, 3/4 Bore
123457-951
810391
Table 11-1: Recommended Spare Parts
11.3 Recommended Spare Parts
11-3
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.4 List of Options
Part Number
192665-000C
192952
193984-000B
215405
227914
227913
173409-000A
202365
257570
266607
138240
188453
188452
188546
215611
194201
Description
Polyolefin Seal Bar Assembly (Refer to Section “11.43 Polyolefin Seal Bar Assembly (Option) (192665-000c)” on page 11-86
for breakdown of assembly)
Polyethylene Seal Bar Assembly (Refer to Section “11.44 Polyethylene Seal Bar Assembly (Option)(192952)” on page 11-88
for breakdown of assembly)
Bridge Assembly (Refer to Section “11.45 Bridge Assembly
(Option) (193984-000b)” on page 11-90 for breakdown of
assembly)
Infeed Photo Eye Mounting Assembly (Refer to Section “11.46
Infeed Photo Eye Mounting Assembly (Option) (215405)” on
page 11-92 for breakdown of assembly)
72” Lug Infeed Conveyor Assembly (Refer to Section “11.47
72” Lug Infeed Conveyor Assembly (Option) (227914)” on
page 11-93 for breakdown of assembly)
72” Infeed Conveyor Core Assembly (Refer to Section “11.48
72” Infeed Conveyor Core Assembly (Option) (227913)” on
page 11-95 for breakdown of assembly)
Lug Assembly (Refer to Section “11.49 Lug Assembly (Option)
(173409-000A)” on page 11-97 for breakdown of assembly)
Miser Wheel Assembly (Refer to Section “11.50 Miser Wheel
Assembly (Option)(202365)” on page 11-98 for breakdown of
assembly)
Caster Assembly (Refer to Section “11.51 Caster Assembly
(Option)(257570)” on page 11-100 for breakdown of assembly)
Product Guides Assembly (Refer to Section “11.52 Product
Guides Assembly (Option) (266607)” on page 11-101 for
breakdown of assembly)
High Product Former Assembly - Inverted (Refer to Section
“11.53 High Product Former Assembly - Inverted (Option)
(138240)” on page 11-102 for breakdown of assembly)
High Product Assembly (Refer to Section “11.54 High Product
Assembly (Option)(188452)” on page 11-104 for breakdown of
assembly)
Film Label Support Assembly (Refer to Section “11.55 Film
Label Support Assembly (Option) (188452)” on page 11-106
for breakdown of assembly)
Hole Punch Assembly Assembly - Polyethylene (Refer to Section “11.56 Hole Punch Assembly - Polyethelyne (Option)
(188546)” on page 11-108 for breakdown of assembly)
Hole Punch Assembly - Polyolefin (Refer to Section “11.57
Hole Punch Assembly - Polyolefin (Option) (215611)” on
page 11-110 for breakdown of assembly)
Low Profile Guide Assembly - Without Miser Wheels (Refer to
Section “11.58 Low Profile Guide Assembly Without Miser
Wheels (Option) (194201)” on page 11-112 for breakdown of
assembly)
Table 11-2: List of Options
11-4
11.4 List of Options
TS37 Shrink Wrapper Installation, Operation & Service Manual
Part Number
203350
194184
231993-001
214810
215353
232062
123456-502B
194199-000D
-
Description
Low Profile Guide Assembly - With Miser Wheels (Refer to
Section “11.59 Low Profile Guide Assembly With Miser Wheels
(Option) (203350)” on page 11-114 for breakdown of assembly)
Dual Encoder Drive Assembly (Refer to Section “11.60 Dual
Encoder Drive Assembly (Option) (194184)” on page 11-116
for breakdown of assembly)
Easy Open Perforator Wheel Assembly (Refer to Section
“11.61 Easy Open Perforator Wheel Assembly (Option)
(194184)” on page 11-118 for breakdown of assembly)
Extension Assembly (Refer to Section “11.62 Extension
Assembly (Option) (214810)” on page 11-120 for breakdown of
assembly)
Photo Eye Assembly (Refer to Section “11.63 Photo Eye
Assembly (Option)(215353)” on page 11-121 for breakdown of
assembly)
Assembly (Refer to Section “11.64 Film Sensor Assembly
(Option) (232062)” on page 11-122 for breakdown of assembly)
230V Electrical Assembly (Refer to Section “11.65 230V Electrical Assembly (Option) (123456-502B)” on page 11-124 for
breakdown of assembly)
460V Electrical Assembly (Refer to Section “11.66 460V Electrical Assembly (Option)(194199-000D)” on page 11-126 for
breakdown of assembly)
120” Servo Lug Electrical Assembly Assembly (Refer to Section “11.67 120” Servo Lug Infeed Electrical Assembly
(Option)” on page 11-128 for breakdown of assembly)
Table 11-2: List of Options
11.4 List of Options
11-5
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.5 Overall Assembly
16
15
5
17
19
7
14
13
12
10
1
4
9
2, 18 & 25
6
3
24
11
17
23
8
Figure 11-1. Overall Assembly
11-6
11.5 Overall Assembly
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
1
191406-000G
Film Rack Assembly (Refer to Sec-
Qty
1
tion “11.6 Film Rack Assembly
(191406-000G)” on page 11-11 for
breakdown of assembly)
2
191398-000E
Sealhead Drive Assembly (Refer to
1
Section “11.10 Seal Head Drive
Assembly (191398)” on page 11-18
for breakdown of assembly)
Seal Head Carrier Assembly (Refer
to Section “11.12 Seal Head Carrier
Assembly (194178-000B)” on
page 11-22 for breakdown of
assembly)
1
3
194178-000B
4
194010-000B
Frame
1
5
194181-000B
Discharge Assembly (Refer to Section “11.14 Discharge Assembly
(194181-000B)” on page 11-26 for
breakdown of assembly)
1
6
242547
Final Trim Seal Assembly (Refer to
Section “11.15 Final Trimseal
Assembly (242547)” on page 11-28
for breakdown of assembly)
1
7
202366
Film Rod Assembly (Refer to Section “11.19 Film Rod Assembly
(202366)” on page 11-36 for breakdown of assembly)
1
8
242552
Trim Seal Conveyor Assembly
(Refer to Section “11.20 Trimseal
Conveyor Assembly (242552)” on
page 11-38 for breakdown of
assembly)
1
9
236498-000A
Upper Guard Assembly (Refer to
Section “11.22 Upper Guard
Assembly (236498)” on page 11-42
for breakdown of assembly)
1
10
227853
Skin Assembly (Refer to Section
“11.23 Skin Assembly (227853)” on
page 11-44 for breakdown of
assembly)
1
11
188508-000C
Variable Sheave Lube Assembly
(Refer to Section “11.24 Variable
Sheave Lube Assembly (188508000C)” on page 11-46 for breakdown of assembly)
1
Table 11-3: Overall Assembly
11.5 Overall Assembly
11-7
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
12
194180-000D
Main Drive Assembly (Refer to
Section “11.25 Main Drive Assembly (194180-000D)” on page 11-48
for breakdown of assembly)
1
13
194023-000H
Pneumatics Assembly (Refer to
Section “11.27 Pneumatics Assembly (194023-000H)” on page 11-52
for breakdown of assembly)
1
14
242557
Scrap Removal Assembly (Refer to
Section “11.35 Scrap Removal
Assembly (242557)” on page 11-64
for breakdown of assembly)
1
15
242553
Film Forming Assembly (Refer to
Section “11.37 Film Forming
Assembly (242553)” on page 11-68
for breakdown of assembly)
1
16
194024-000A
TS-37 Photoeye Assembly (Refer
to Section “11.38 TS-37 Photo Eye
Assembly (194024-000A)” on
page 11-72 for breakdown of
assembly)
1
17
TS37-ELEC
Electrical Assembly (Refer to Section “11.42 Electrical Assembly
(TS37-ELEC)” on page 11-80 for
breakdown of assembly)
1
18
191423-000D
Seal Head Assembly (Refer to Section “11.39 Seal Head Assembly
(191423-000D)” on page 11-74 for
breakdown of assembly)
1
19
194182-000A
Variable Sheave Drive Assembly
(Refer to Section “11.41 Variable
Sheave Drive Assembly (194182000A)” on page 11-78 for breakdown of assembly)
1
20
193984-000b
Bridge Assembly (Refer to Section
“11.45 Bridge Assembly (Option)
(193984-000b)” on page 11-90 for
breakdown of assembly)
1
21
202365
Miser Wheel Assembly (Refer to
Section “11.50 Miser Wheel
Assembly (Option)(202365)” on
page 11-98 for breakdown of
assembly)
1
22
257570
Casters (Refer to Section “11.51
Caster Assembly
(Option)(257570)” on page 11-100
for breakdown of assembly)
4
Table 11-3: Overall Assembly
11-8
11.5 Overall Assembly
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
23
265696
Infeed Conveyor Assembly (Refer
to Section “11.47 72” Lug Infeed
Conveyor Assembly (Option)
(227914)” on page 11-93 for breakdown of assembly)
1
24
215405-000c
Infeed Photoeye Mounting Assembly (Refer to Section “11.46 Infeed
Photo Eye Mounting Assembly
(Option) (215405)” on page 11-92
for breakdown of assembly)
1
25
192665-000c
Polyolefin Seal Bar Assembly
(Refer to Section “11.43 Polyolefin
Seal Bar Assembly (Option)
(192665-000c)” on page 11-86 for
breakdown of assembly)
1
26
266607
Product Guides Assembly (Refer
to Section “11.52 Product Guides
Assembly (Option) (266607)” on
page 11-101 for breakdown of
assembly)
1
Table 11-3: Overall Assembly
11.5 Overall Assembly
11-9
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11-10
11.5 Overall Assembly
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.6 Film Rack Assembly (191406-000G)
Figure 11-2. Film Rack Assembly
11.6 Film Rack Assembly (191406-000G)
11-11
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
1
101344
Counterweight, Dancer
1
2
120043
1
3
120044
Bkt, Mtg, Plunger Ts-37n
Plt, Latch Ts-37n
4
251042
Frame, Side, Film Rack, Rh
1
5
136663
Screw, Clamp, 5", Crs,
2
6
136664-000D
Needle Rubber Roller Assembly
(Refer to Section “Needle Rubber
Roller Assembly” on page 11-15 for
breakdown of assembly)
1
7
193981
Plt, Mtg, Adj, Roll
1
8
802744
Brg, Flg, 3/4 Id, 2-bolt, 3.53 Mtg
Holes
2
9
191350-003
Plt, Nut, 3/8 X 1/2 X 3-1/2, 1/4-20
2
10
136687
Dancer Bearing Block Assembly
(Refer to Section “Dancer Bearing
Block Assembly” on page 11-16 for
breakdown of assembly)
2
11
191362
Bkt, Mtg, Filmrack Ts-37ne
2
12
136686
Shaft, Drive, 3/4, Crs, Ts-37
1
13
191361-001
Bkt, Slide, Filmrack Lh
1
14
191361
Bkt, Slide, Filmrack Rh
1
15
251043
Frame, Side, Film Rack, Lh
1
16
251027
Blk, Clamp, Guide, Film
2
17
142125-003
Stud, Rlr, S.s., 7", 7" Lg
2
18
142126
Rlr, Film, Uhmw,
6
19
202411
Rlr, Idl, Al, 2.000 Od 46.375" Lg
1
20
142129-748
Shaft, 0.750, Tapped, 5/16-18
46.75 Lg
1
21
142131
Shaft, Tracking, Film Ts-37n
1
22
142131-000A
Drive Roller Assembly (Refer to
Section “Drive Roller Assembly” on
page 11-17 for breakdown of
assembly)
1
23
251029
Blk, Mtg, Guide, Film
2
24
142136-717A
Rlr, Idl, Al, 1.500, 45-1/16 Lg "A"
Dim 44 13/16, 45 1/16
1
25
142136-741A
Rlr, Idl, Al, 1.500, 46-9/16 Lg "A"
Dim 46 5/16, 46 9/16 Overall
2
26
142136-688A
Rlr, Idl, Al, 1.500, 43-1/4 Lg "A" Dim
43, 43 1/4 Overall Lg
1
Table 11-4: Film Rack Assembly
11-12
11.6 Film Rack Assembly (191406-000G)
Qty
1
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
27
142137-748
Shft, G&p, Crs, 1/2" Dia, 1/4-20 Tap
"A" = 46 3/4
4
28
142137-724
Shft, G&p, Crs, 1/2" Dia, 1/4-20 Tap
"A" = 45 1/4
1
29
142139
Wheel, Needle, 2" Od, 1" Lg, 1.5 Id
1/16 Lg Needles
3
30
142140
Spacer, Wheel, Needle, Ts-37
2
31
191528
Drive Motor Guard Assembly
1
32
142142-000A
Wldmt, Clamp, Counterweight, Ts37n
1
33
142144
Bar, Dancer Ts-37
2
34
191505
Mnt, Shock, Film Rack
1
35
142146
Rod, 3/8-16, S.s. Ts-37, 3 1/2 Lg
1
36
142147
Blk, Mtg, Perf, Clear Anodize, Ts-37
2
37
142148
Shaft, Wheel, Perf Ts-37n
1
38
138175
Shaft, Pivot, Dancer Bar Ts-37n
1
39
800323-012
Fsnr, Bolt, Shldr, 3/8 Dia X 1-3/4
Lg,
2
40
193949
Spkt, 35b36, Mod, 0.625 Bore
1
41
114883
Spkt, 35b13, Mod, 0.750 Bore
2
42
800438
Wshr, Oilite, 0.753 X 1.375 X 1/8
Thk
2
43
814865
Slide, 250lb, 36"Lg, Pair
1
44
810652
Brg, Cart, 3/4 X 1-3/4 X 1/2 Lg Double Sealed
2
45
800446
Wshr, Oilite, 0.507 X 0.750 X 1/16
Thk,
10
47
800561
Collar, Shaft, Set Screw, 1/2,
4
48
800560
Collar, Shaft, Set Screw, 5/8,
2
49
811914
Knob, 4 Prong, 3/8-16, Br Ins
3
50
810565
Plunger, Index, 3/8-24, Non Locking
1
51
194196
Box, Pot, Dancer
1
52
242419
Pulley, Timing, 16t, .08 P, 1/4 W,
Mod 1/4 Bore, All Steel
1
53
801227
Pulley, Timing, 120t, .0816 P, 1/4
W, .313 Bore, Double Flange,
1
54
810415
Belt, Timing, 0.0816 P, 1/4 W,
14.525 Lg
1
55
810697
Shock, 1/4 Bore, 1/2 Stroke Snald225 W/button
1
Table 11-4: Film Rack Assembly
11.6 Film Rack Assembly (191406-000G)
11-13
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
56
810696
Spring, Comp, 0.540 Od X 1" Lg,
0.067 Dia Music Wire
57
800459
Chain, Rlr, #35, Rlr Rvt, (Hanagatag9000408)
58
800515
Link, Conn, #35,
1
59
816996
Motor, Gear, 1/8 Hp, 90vdc, 60
Rpm Ratio 30:1, Lh Version, Series
1
61
814404
Rule, Adhesive, Metal, 1/2w X 4ft,
Left-right
2
Table 11-4: Film Rack Assembly
11-14
11.6 Film Rack Assembly (191406-000G)
Qty
2
2.30
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.7 Needle Rubber Roller Assembly (136664-000D)
Figure 11-3. Needle Rubber Roller Assembly
Fig ref.
Part number
Description
Qty
1
142138
Insert, Rlr, Needle TS-37
2
2
810654
Tubing, Rubber, 1.625id X 0.187w
1
3
802786
X 48"Lg, 40 Dur, Black, Mandrel Bu
Brg, Cart, 1/2 X 1-1/8 X 5/16 Lg,
Shielded, Press Fit Id & Od
2
4
800316-013
Pin, Roll, 1/8 Dia X 1/4 Lg
6
5
901924
Al Tbg 1-3/4 Od X 16ga, 6061t6511,
43.2
5
6
900181
Al Rnd 1-3/4, 6061-t6511,
1.5
Table 11-5: Needle Rubber Roller Assembly
11.7 Needle Rubber Roller Assembly (136664-000D)
11-15
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.8 Dancer Bearing Block Assembly (136687)
Figure 11-4. Dancer Bearing Block Assembly
Fig ref.
1
Part number
Description
800387
Bush, Oilite, Flg, 0.502 X 0.627 X
Qty
1
3/8, 3/4 Od X 3/32 Thk Flg
2
900024
Al Flat 1/4 X 1-1/2, 6061
Table 11-6: Dancer Bearing Block Assembly
11-16
11.8 Dancer Bearing Block Assembly (136687)
2.5
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.9 Drive Roller Assembly (142132-000A)
Figure 11-5. Drive Roller Assembly
Fig ref.
Part number
Description
Qty
1
142133
Rlr, Drive, TS-37n
1
2
142134
2
3
812099
Insert, Rlr, Drive, Ts-37n
Tape, Friction, 2 X 60ft, In Feet,
4
900914
Al Tbg 2 Od X 1/4 Wall, 6061t6511,
5
900180
Al Rnd 1-1/2, 6061-t6511,
15
45.6
3
2
Table 11-7: Film Rack Assembly
11.9 Drive Roller Assembly (142132-000A)
11-17
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.10 Seal Head Drive Assembly (191398)
Figure 11-6. Seal Head Drive Assembly
11-18
11.10 Seal Head Drive Assembly (191398)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
100763
Rack, Gear, Hardened, Crg
2
2
138479
Gear, Drv, Hardened, Carriage Ts-
2
37n Carrier Drive, 1 1/2 Bore
Long Block Ball Bearing Assembly
(Refer To Section “Long Block Ball
Bearing Assembly” on page 11-21
For Breakdown Of Assembly)
4
3
191399
4
1198686
Spkt, 40a22, Mod, 2.189 Bore,
Special, Clutch 4 Hole, Ts-37
1
5
119872
Wldmt, Eye, Cyl, Crs Ts-37n
1
6
119873-464
Shaft, Thomson, 1.000, 29.000 Lg,
Crs 29 Lg
2
7
803923-001
Fsnr, Nut, Hex, Jam, 1-1/4-12
4
8
119876
Arm, Ext, Carrier Ts-37n
1
9
119877
Mtg, Eye, Cyl Ts-37n
1
10
142277
Blk, Mtg, Shaft, Carrier Ts-37n,
Fixed Shaft
1
11
142278
Blk, Mtg, Shaft, Carrier Ts-37n,
Floating Shaft
1
12
191346
Bkt, Mtg, Seal Frame
2
13
215396
Mtg, Follower, Cam, Lh
1
14
215396-001
Mtg, Follower, Cam, Rh
1
15
215398
Blk, Mtg, Shaft, Floating As Shown
1
16
215397
Blk, Mtg, Shaft, Fixed As Shown
1
17
119885
Shaft, Drive, Carrier, Ts-37n
1
18
801986
Cyl, Air, 2 Bore, 10 Stroke, Al
Squarehd Clevis Mnt See P7el10a1c-
1
19
810391
Clutch, Air, 3/4 Bore
1
20
802881
Follower, Cam, 1 Od, 7/16-20 Stud,
Crowned, Eccentric 5/8 O.d
2
21
802731
Brg, Pillow Blk, 3/4 Id Light-duty
2
22
807598
Shock, Adj, 1/2 Bore X 2 Stroke, Air
Over Oil
2
23
802937
Bush, Trantorque, 3/4 X 1-1/2 X 11/2, 3/4 Lg Expanding Od
2
24
806253
Brg, Spherical, 1/2 X 1 X 1/2 Lg
2
25
142244
Guard, Gear Rack
1
26
811052
Fitting-grease 3/16drive65degr
2
27
191365
Yoke, Clutch, Crs
1
Table 11-8: Seal Head Drive Assembly
11.10 Seal Head Drive Assembly (191398)
11-19
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
28
194029
Bkt, Prox, Limit, Sealhead
1
29
194177
Ring, Spacer, Clutch, Crs
1
30
800035
Pad, Poly, Shock, Pp-1/2, For Magnum Series 33
2
31
800324-010
Fsnr, Bolt, Shldr, 1/2 Dia X 1-1/4
Lg,
2
Table 11-8: Seal Head Drive Assembly
11-20
11.10 Seal Head Drive Assembly (191398)
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.11 Long Block Ball Bearing Assembly (191399)
Figure 11-7. Long Block Ball Bearing Assembly
Fig ref.
Part number
Description
Qty
1
191347
Blk, Bush, Carriage
1
2
101227
Spacer, Bush, 1" Shaft, 3.500 Lg
1
3
800335-023
Blk, Single Ball Bush
Ring, Snap, Internal, 1-9/16 Bore,
2
4
802926
Ring, Seal, 1 X 1.567 X 0.187 Thk,
2
5
802970
Bush, Ball, 1 X 1-9/16 X 2-1/4 Lg,
Alignment Compensating
1
6
900170
Al Flat 3 X 3-1/2, 6061
2.38
Table 11-9: Long Block Ball Bearing Assembly
11.11 Long Block Ball Bearing Assembly (191399)
11-21
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.12 Seal Head Carrier Assembly (194178-000B)
Figure 11-8. Seal Head Carrier Assembly
11-22
11.12 Seal Head Carrier Assembly (194178-000B)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
119972-013
Rlr, 5/8 Od, S.s., 17.859 Lg
2
2
188633
2
3
119973
Plt, Side, Carrier
Shaft, Rlr, Idler, Ts-37
2
4
119977
Bar, Cross, Lower Ts37, Clr Anod
1
5
232313
Bkt, Mtg, Rlr, Infeed Infeed Side,
Longer Tongue
1
6
191443
Blk, Shaft, Mtg, Clr Anod
2
7
800322-004
Fsnr, Bolt, Shldr, 5/16 Dia X 3/4 Lg,
1/4-20 Th'd
2
8
815213
Wshr, Oilite, 0.255 X 0.625 X 1/16
Thk,
4
9
104631-003
Shaft, 1.000, Tapped, 3/8-16,
11.312 Lg
1
10
142183
Bkt, Mtg, Shaft Ts37, Clr Anod
2
11
142184-000B
Idler Roller Assembly (Refer To
Section “Idler Roller Assembly” on
page 11-24 For Breakdown Of
Assembly)
1
12
803981
Wshr, Oilite, 1.003 X 1.504 X 1/16
Thk
2
Table 11-10: Seal Head Carrier Assembly
11.12 Seal Head Carrier Assembly (194178-000B)
11-23
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.13 Idler Roller Assembly
Figure 11-9. Idler Roller Assembly
Fig ref.
Part number
Description
Qty
2
142186
Insert, Roller
2
3
813654
Bearing, Cart
2
4
800316-015
Pin, Roll 1/8” Dia x 3/8” Lg
6
Table 11-11: Idler Roller Assembly
11-24
11.13 Idler Roller Assembly
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.13 Idler Roller Assembly
11-25
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.14 Discharge Assembly (194181-000B)
Figure 11-10. Discharge Assembly
11-26
11.14 Discharge Assembly (194181-000B)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
816524
Tape, Slit, Nolu-d 1/8th X 8w
4
2
191369-001
1
3
119972-004
Bkt, Rlr, Idler, Rh Ts-37ne
Rlr, 5/8 Od, S.s., 11.109 Lg
4
191369
Bkt, Rlr, Idler, Lh Ts-37ne
1
5
191363
Plt, Dschg Ts-37ne
1
6
143446-001
Collar, Guide, Film Plated
2
7
191368
Bar, Cross, Mtg, Take Up
1
8
142096
Nut, Takeup Ts-37
2
9
191367
Plt, Cap, Take Up
2
10
142104-203
Shaft, 0.500, Tapped, 1/4-20, Ss,
12 11/16 Lg
2
11
800446
Wshr, Oilite, 0.507 X 0.750 X 1/16
Thk,
6
12
142111-001
Shaft, Takeup, Belt "A" = 14.250
1
13
188603-004
Rlr, Idl, Ss, 1.500, 1/2 Bore "A" Dim
12 1/4, 12 1/2 Overall Lg
3
14
191366
Screw, Adjustment
2
15
191332
Rlr, Idl, Al, .750 "A"= 12 9/32 Anodized
1
16
191335
Shaft, Rlr A = 13
1
17
191336
Shaft, Rlr, 1/4 Od, Tapped 12 1/2
Lg
1
18
251456
Blk, Mtg, Rlr
2
19
119972-015
Rlr, 5/8 Od, S.s. 12.3125 Lg
1
20
142178
Shaft, Rlr, Discharge, Ts-37, 12 1/4
Lg
1
21
191334
Bkt, Rlr
1
22
191333
Bar, Cross, Bkt, Rlr Ts-37ne
1
23
191364
Frame, Side, Take Up Lh
1
24
191364-001
Frame, Side, Take Up Rh
1
25
815213
Wshr, Oilite, 0.255 X 0.625 X 1/16
Thk,
4
1
Table 11-12: Discharge Assembly
11.14 Discharge Assembly (194181-000B)
11-27
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.15 Final Trimseal Assembly (242547)
Figure 11-11. Final Trimseal Assembly
11-28
11.15 Final Trimseal Assembly (242547)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
242548
Lower Trim Seal Assembly (Refer
To Section For Breakdown Of
Assembly)
1
2
242549
Upper Trim Seal Assembly (Refer
To Section For Breakdown Of
Assembly)
1
3
242550
Trimseal Carrier Drive Assembly
(Refer To Section For Breakdown
Of Assembly)
1
4
172071
Space Adjustment Tool
1
5
137828-000B
Hot Wire Assembly
3
Table 11-13: Final Trimseal Assembly
11.15 Final Trimseal Assembly (242547)
11-29
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.16 Lower Trim Seal Assembly (242548)
Figure 11-12. Lower Trim Seal Assembly
11-30
11.16 Lower Trim Seal Assembly (242548)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
242546
Bar, Lower, Mtg, Side Seal Ts-37,
1
3
119917
L.h. Std
Hldr, Post, Ribbon, Front, Ts-37
1
4
119918
Bsg, Tension, Ribbon, Lower, Ts-37
1
5
119920
Pulley, Timing, Ts-37
1
6
119921
Shaft, Drive, Bar, Lower, Ts-37
1
7
119925
Takeup, Rlr, Idler, TS-37
1
8
119926
Axle, Pul, Idl, TS-37
1
9
119927
Assy, Pulley, Belt, Trim, TS-37,
Trimseal
1
10
119930
Assy, Pulley, Belt, Seal, TS-37
1
11
119935
Left Hand Lower Seal Bar Assembly (Refer To Section “Left Hand
Lower Seal Bar Assembly” on
page 11-32 For Breakdown Of
Assembly)
1
12
119936
Spkt, 35b11, Mod, 0.375 Bore, Special, Martin Only, Kwy & Ss
1
13
119937
Gear, Spur, Ts-37
1
14
137827
Hldr, Ribbon, Bar, Lower, TS-37
1
15
137828-000B
Assy, Wire, Hot, Ts-37
1
16
800253-001
Ring, Snap, E-style, 3/8 Shft Dia,
2
17
809970
Spring, Comp, 0.720 Od X 1-3/4l,
Music,
1
18
809972
Spring, Comp, 0.420 Od, X 1 1/4,
Ss,
1
19
809974
Double Gearbelt, .390w +0/-.010,
1
20
809969
Belt, Timing, .275w +0/-.015,
1
22
144825-011
Spcr, 9/32 Id, 3/4 Od, .125 Lg, Aluminum
2
23
236608
Shaft, Locating, Sealer A=4
1
24
236609
Shaft, Locating, Sealer, Stop A=4
1
Table 11-14: Lower Trimseal Assembly
11.16 Lower Trim Seal Assembly (242548)
11-31
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.17 Left Hand Lower Seal Bar Assembly (119935)
Figure 11-13. Left Hand Lower Seal Bar Assembly
Fig ref.
1
Part number
Description
219928
Assy, Sub, Bar, Seal, Lwr, L.h., Ts-
Qty
1
37, As Shown
2
815991
Fsnr, Screw, Special, Nylon, Metal
3
902750
Core,
Pl Teflon Flat 1/8 X 1
4
900310
Ss Flat 1 X 1-1/2, T304
8
5
902852
Ss Sq 1-1/2, 303
1
Table 11-15: Left Hand Lower Seal Bar Assembly
11-32
11.17 Left Hand Lower Seal Bar Assembly (119935)
3
1.11
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.17 Left Hand Lower Seal Bar Assembly (119935)
11-33
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.18 Upper Trim Seal Assembly
Figure 11-14. Upper Trimseal Assembly
11-34
11.18 Upper Trim Seal Assembly
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
242545
Bar, Top, Mtg Ts-37, L.h.
1
2
119941
1
3
119940
Bar, Upper, Ts-37, L.h. Std
Bar, Upper, Seal, Ts-37, L.h. Std
4
119939
Spcr, Bar, Upper, Ts-37
1
5
119920
Pulley, Timing, Ts-37
1
6
119942
Shaft, Drive, Upper, Ts-37
1
7
119925
Takeup, Rlr, Idler, Ts-37
1
8
119926
Axle, Pul, Idl, Ts-37
1
9
119927
Assy, Pulley, Belt, Trim, Ts-37,
Trimseal
1
10
119930
Assy, Pulley, Belt, Seal, Ts-37
1
11
119944
Plt, Blt, Ts-37
1
12
119945
Plt, Blt, 1/4 W, Ts-37
1
13
119943
Gear, Drive, Ts-37
1
15
809969
Belt, Timing, .275w +0/-.015,
1
16
800253-001
Ring, Snap, E-style, 3/8 Shft Dia,
2
17
809970
Spring, Comp, 0.720 Od X 1-3/4l,
Music,
1
18
809973
Spring, Comp, 0.180 Od X 9/16 Lg,
0.020 Ss Wire
8
19
809974
Double Gearbelt, .390w +0/-.010,
1
20
800327-020
Fsnr, Shcs, 6-32 X 9/16, Ss,
8
21
242521
Bkt, Mtg, Plunger
1
22
825835
Knob, Hand, Al, 1/4-20, 3" Lg 1/420 X 3 Stud
2
23
825831
Plunger, Sprg, Hand Retractable 5/
16-18 Th'd
1
1
Table 11-16: Upper Trimseal Assembly
11.18 Upper Trim Seal Assembly
11-35
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.19 Film Rod Assembly (202366)
Figure 11-15. Film Rod Assembly
Fig ref.
Part number
Description
1
202362
Plt, Mtg, Finger/miser
1
2
202364
1
3
171786
Spacer, Mtg, Finger/miser
Rod, Guide, Film 3" Lg
Table 11-17: Film Rod Assembly
11-36
11.19 Film Rod Assembly (202366)
Qty
3
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.19 Film Rod Assembly (202366)
11-37
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.20 Trimseal Conveyor Assembly (242552)
Figure 11-16. Trimseal Conveyor Assembly
11-38
11.20 Trimseal Conveyor Assembly (242552)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
227883
Frame, Conv, Trimseal Ts-37
1
2
800446
Wshr, Oilite, 0.507 X 0.750 X 1/16
6
3
138488
Thk,
Spcr, Plt, Conv, "A" = 9.563
1
4
808254
Counter, Position, 1/2 Id, Clockwise
Increment
1
5
191375
Screw, Take Up, Belt
2
6
191476
Brg, Conv Ts-37ne
2
7
142095-000A
Drive Conveyor Roller Assembly
(Refer To Section “Drive Conveyor
Roller Assembly” on page 11-41
For Breakdown Of Assembly)
1
8
142096
Nut, Takeup Ts-37
2
9
191506
Bkt, Shaft, Adj Ts-37ne
4
11
191477
Blk, Brg Ts-37ne
2
12
142102-000A
Wshr, Thrust, Mod, Ts-37
4
13
142103
Sleeve, Spline, 1.000, Mod, Ts-37
2
14
142104-153
Shaft, 0.500, Tapped, 1/4-20, Ss, 9
9/16 Lg
2
15
142106
Rlr, Idler, Ts-37, Std
1
16
142107
Shaft, 0.375, Tapped, 1/4-20, 9.563
Lg
2
17
142108
Rlr, Idl, Conv, Infeed, 9.343 Lg
2
18
142109-002
Rlr, Idl, Upper, 9.375 Lg "A" = 9.375
1
19
142110-000B
Rlr, Upper, 9.43 Lg
1
20
142111
Shaft, Takeup, Belt, "A"= 11.145
1
21
232317-001
Screw, Adj, Conv, 5/8-11 "A" = 21 3/
4
1
22
232316
Nut, Adj, 5/8-11
1
23
142114
Shaft, Spline, Drive, Conv, Ts-37
1
24
119873-476
Shaft, Thomson, 1.000, 29.750 Lg,
Crs 29 3/4 Lg
1
25
142115
Plt, Mtg, Shaft, Anodized Ts-37
2
26
802953
Brg, Cart, 1/2 X 1-3/8 X 7/16 Lg,
2
27
802786
Brg, Cart, 1/2 X 1-1/8 X 5/16 Lg,
Shielded, Press Fit Id & Od
2
28
812542
Bush, Oilite, Flg, 0.3765 X 0.5030
X 5/8, Lg, 5/8 Od X 3/32 Thk Flg
4
29
810644
Bush, Ball, 1 X 1-9/16 X 2-1/4 Lg
Super Smart
2
Table 11-18: Trimseal Conveyor Assembly
11.20 Trimseal Conveyor Assembly (242552)
11-39
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
30
802796
Brg, Flg, 1/2 Id, 2-bolt Malleable
1
31
802760
Brg, Flg, 1 Id, 2-bolt,
2
32
810487
Handwheel, 4.5, Dia, Al, Diecast W/
handle
1
35
128191
Spkt, 40b21, Mod, 1.000 Bore
1
36
142117
Belt, Conv, 9 1/2 X 94, Laced, Ts37
1
Table 11-18: Trimseal Conveyor Assembly
11-40
11.20 Trimseal Conveyor Assembly (242552)
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.21 Drive Conveyor Roller Assembly (142095000A)
Figure 11-17. Drive Conveyor Roller Assembly
Fig ref.
Part number
Description
Qty
1
142097
Insert, Rlr, Spline, Ts-37n
1
2
142098
Insert, Rlr, Bsg, Ts-37n
1
3
810491
Cover, Rlr, Neopreme, 2.95 Id X
.1875w, 41" Lg, 50 +/- Duro, Black
4
810633
Slv, Spline, .916/.917, 1.75 Od, 2" Ltb,
Crs
1
5
807110
Bush, Oilite, 1.0010 X 1.2520 X 3/4 Lg,
1
6
800316-007
Pin, Roll, 1/8 Dia X 3/4 Lg,
6
7
800316-007
Pin, Roll, 1/8 Dia X 3/4 Lg,
1
8
900751
Crs Tbg Dom 7 Od X 1/2 Wall
9.5
9
900906
Al Rnd 3, 6061-t6511,
3.5
10
142098
Insert, Rlr, Bsg, Ts-37n
1
11
810491
Cover, Rlr, Neopreme, 2.95 Id X
.1875w, 41" Lg, 50 +/- Duro, Black
12
810633
Slv, Spline, .916/.917, 1.75 Od, 2" Ltb,
Crs
1
13
807110
Bush, Oilite, 1.0010 X 1.2520 X 3/4 Lg,
1
14
800316-007
Pin, Roll, 1/8 Dia X 3/4 Lg,
6
.25
.25
Table 11-19: Drive Conveyor Roller Assembly
11.21 Drive Conveyor Roller Assembly (142095-000A)
11-41
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.22 Upper Guard Assembly (236498)
Figure 11-18. Upper Guard Assembly
Fig ref.
1
Part number
Description
236497
Kit, Guard, Upr, Ts37, Extruded
Qty
1
Quote # Jrb-110305b
2
236565
Plt, Guard
Panel, Lexan, Guard, Notched 31
3/16 X 9 15/16
4
3
236610
4
236610-001
Panel, Lexan, Guard, Notched 48
13/32 X 22 7/32
1
5
236611
Panel, Lexan, Guard
2
6
236625
Bkt, Mtg, Light, Stack
1
Table 11-20: Upper Guard Assembly
11-42
11.22 Upper Guard Assembly (236498)
2
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.22 Upper Guard Assembly (236498)
11-43
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.23 Skin Assembly (227853)
5
6
7
8
12
13
9
1
2
3
11
Figure 11-19. Skin Assembly
11-44
11.23 Skin Assembly (227853)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
142123
Guard, Trimseal Conv, L.H. TS-
2
142124
Guard, Trimseal Conv, R.H. TS-
1
3
142264
37n, L.h. Std
Door, Film Rack TS-37 Std
1
4
188486
Guard, Front, Left, Upper TS-37n
1
5
227854
Guard, Drive, Discharge, Casters
1
6
194012
Guard, Discharge
1
7
194013
Guard, Scrap Wind
1
8
194014
Guard, Film Rack
1
9
227855
Guard, Dschg, End,
1
11
194017
Guard, Film Rack, Rh
1
12
194018
Guard, Filmrack, E-box
1
13
194019
Guard, Lube
1
14
807466
Hdl Black Reinforced Plastic Blind
Hole Brass Insert 5/16-18
1
1
37n, L.h. Std
Table 11-21: Skin Assembly
11.23 Skin Assembly (227853)
11-45
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.24 Variable Sheave Lube Assembly (188508-000C)
Figure 11-20. Variable Sheave Lube Assembly
11-46
11.24 Variable Sheave Lube Assembly (188508-000C)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
802208
Ft, Grease, 1/8 Npt, Str
21
2
801455
Ftg, Bulkhead, 1/8 Npt
21
3
801456
Ftg, Nut
21
4
801449
Ftg, Conn, 1/8 Od Tbg Comp
23
5
142271
Bkt, Lube
1
6
801406
Ftg, Elbow, 1/8 Od Tbg Comp
13
7
802209
Ftg, Grease, 45 Deg, 1/8 Npt
2
8
801531
Ftg, Plug, Hex-Head, 1/8 Npt
2
9
801451
Ftg, Conn, 1/8 Od Tbg Comp x 1/8
Npt
4
10
811052
Ftg, Grease, 3/16, Drv, 65 Deg
2
Table 11-22: Varible Sheave Lube Assembly
11.24 Variable Sheave Lube Assembly (188508-000C)
11-47
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.25 Main Drive Assembly (194180-000D)
Figure 11-21. Main Drive Assembly
11-48
11.25 Main Drive Assembly (194180-000D)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
102151.001
Pul, Drv, Encdr
1
2
102152
Pul, Drvn, Encdr
1
3
120047
Bkt, Mtg, Encdr
1
4
120049.001
Post, Mtg, Take Up
1
5
120051
Shaft, Drive, Upper
1
6
138180
Plt, Mtg, Take Up
1
7
188561
Spacker, G-Box
2
8
138167
Plt, Take Up
1
9
138480
Shaft, Drv, Lower
1
10
123722
Spkt, 40B18, Mod, 1.000 B
1
11
128810
Spkt, 40B22, Mod, 1.000 B
2
12
128811
Spkt, 40B20, Mod, 1.000 B
1
13
128191
Spkt, 40B21, Mod, 1.000 B
1
14
800906
Spkt, 40BB17H, Idler
3
15
801244
Blt, Tmg, 1/5P, 1/4 W, 18 Lg
1
16
806567
Brg, Pillow Bkt, 1 Id
4
17
808445
Gearbox, F721, 20:1, 56C
1
18
810613
Motor, 1 Ht, Syncro
1
19
800462
Chain, Rlr, #40
26.7
20
800502
Link, Conn, #40
5
21
142187.001
Rubberized Roller Assembly (Refer
To Section “11.26 Rubberized
Roller Assembly (142187.001)” on
page 11-50 For Breakdown Of
Assembly)
1
Table 11-23: Main Drive Assembly
11.25 Main Drive Assembly (194180-000D)
11-49
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.26 Rubberized Roller Assembly (142187.001)
Figure 11-22. Rubberized Roller Assembly
Fig ref.
Part number
Description
Qty
2
142189
Insert, Rlr,
1
3
142190
Insert, Rlr, W/keyway,
1
4
810835
Cover, Rlr, Neoprene, 2.95 Id X
5
800316-001
Pin, Roll, 1/8 Dia X 1/2 Lg,
6
901751
Al Tbg 3 Od X .065 Ga Wall,
15.7
5
7
900906
Al Rnd 3, 6061-t6511,
2.5
1.3
.125w, 41
Table 11-24: Rubberized Roller Assembly
11-50
11.26 Rubberized Roller Assembly (142187.001)
6
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.26 Rubberized Roller Assembly (142187.001)
11-51
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.27 Pneumatics Assembly (194023-000H)
Figure 11-23. Pneumatics Assembly
11-52
11.27 Pneumatics Assembly (194023-000H)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
194187
Pneumatic Air Tank Assembly
(Refer To Section “11.28 Pneumatic
Air Tank Assembly (194187)” on
page 11-54 For Breakdown Of
Assembly)
1
2
194188-000B
Pneumatic Valve Assembly (Refer
To Section “11.29 Pneumatic Valve
Assembly (194188-000B)” on
page 11-56 For Breakdown Of
Assembly)
1
3
194189-000B
Pneumatic Carriage Cylinder
Assembly (Refer To Section “11.30
Pneumatic Carriage Cylinder
Assembly (194189-000B)” on
page 11-58 For Breakdown Of
Assembly)
1
4
194190-000B
Pneumatic Carriage Clutch Assembly (Refer To Section “11.31 Pneumatic Carriage Clutch Assembly
(194190-000B)” on page 11-59 For
Breakdown Of Assembly)
1
5
194191-000B
Pneumatic FRL Assembly (Refer
To Section “11.32 Pneumatic FRL
Assembly (194191-000B)” on
page 11-60 For Breakdown Of
Assembly)
1
6
194192-000A
Pneumatic Scrap Cylinder Assembly (Refer To Section “11.33 Pneumatic Scrap Cylinder Assembly
(194192-000A)” on page 11-61 For
Breakdown Of Assembly)
1
7
194193
Pneumatic Pressure Regulator
Assembly (Refer To Section “11.34
Pneumatic Pressure Regulator
Assembly (194193)” on page 11-62
For Breakdown Of Assembly)
1
Table 11-25: Pneumatics Assembly
11.27 Pneumatics Assembly (194023-000H)
11-53
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.28 Pneumatic Air Tank Assembly (194187)
Figure 11-24. Pneumatic Air Tank Assembly
11-54
11.28 Pneumatic Air Tank Assembly (194187)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
800040
Valve, Needle, 1/4 Npt
1
2
819520
1
3
819521
Ftg, Nipple, 1/4 Npt X 5 Lg, Galv
Ftg, Elbow, Union, 1/4 Npt Female
Brass
4
801429
Ftg, Nipple, Hex, 1/4 Npt, Brass
1
5
801539
Ftg, Bush, 1/2 Npt Male X 1/4 Npt
Female Brass
1
6
801431
Ftg, Nipple, Hex, 1/2 Npt, Brass
1
7
801396
Ftg, Elbow, Street, 1/2 Npt Female
X 1/2 Npt Male
1
8
819519
Ftg, Barb, 1/2 Hose X 1/2 Npt,
Male, Brass
2
9
801528
Muffler, Quiet Flow 3/4
1
10
801489
Ftg, Bush, 1 Npt Male X 1/2 Npt
Female Galv
1
11
800173
Tank, Air, 2 Gal
1
12
809558
Valve, Sol, 3way, Safety, Exhaust
24vdc
1
1
Table 11-26: Pneumatic Air Tank Assembly
11.28 Pneumatic Air Tank Assembly (194187)
11-55
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.29 Pneumatic Valve Assembly (194188-000B)
Figure 11-25. Pneumatic Valve Assembly
11-56
11.29 Pneumatic Valve Assembly (194188-000B)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
801460
Ftg, Elbow, 1/4 Od Tbg Push-on X
14
2
801534
3
801532
4
801537
Ftg, Bush, 3/8 Npt Male X 1/4 Npt
Female Brass
3
5
801464
Ftg, Elbow, 3/8 Od Tbg Push-on X
1/4 Npt
3
7
801533
Ftg, Plug, Hex-head, 3/8 Npt, Brass
1
8
801527
Muffler, Quiet Flow 1/2
2
9
819519
Ftg, Barb, 1/2 Hose X 1/2 Npt,
Male, Brass
1
10
801390
Ftg, Barb, 1/4 Hose X 1/4 Npsm
Female, Brass
2
11
804994-902
Plug, Hole, 1.000, Dp-100
3
12
191270
Assy, Valve, Sol, Manifold, 2@ 93
2@ 92, One Isol
1
13
812424
Valve, Control, Flow, 1/4 Npt,
104104, Ref: Use
6
14
813694
Fsnr, Nut, Mtg, Panel,
6
15
194022
Bkt, Valve & Regulator, Lh
1
16
816540
Breather Vent, 1/4 Npt Port
1
1/4 Npt Male
Ftg, Plug, Hex-head, 1/2 Npt, Brass
Ftg, Plug, Hex-head, 1/4 Npt, Brass
3
7
Table 11-27: Pneumatic Valve Assembly
11.29 Pneumatic Valve Assembly (194188-000B)
11-57
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.30 Pneumatic Carriage Cylinder Assembly
(194189-000B)
Figure 11-26. Pneumatic Carriage Cylinder Assembly
Fig ref.
1
Part number
Description
801464
Ftg, Elbow, 3/8 Od Tbg Push-on X
Qty
1
1/4 Npt
2
801429
1
801463
Ftg, Nipple, Hex, 1/4 Npt, Brass
Ftg, Conn, 3/8 Od Tbg Push-on X
1/4 Npt Male
3
4
801526
Muffler, Quiet Flow 3/8
1
5
816541
Valve, Exh, Quick, 1/4 Npt 1.57 Cv
1
Table 11-28: Pneumatic Carriage Cylinder Assembly
11-58
11.30 Pneumatic Carriage Cylinder Assembly (194189-000B)
1
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.31 Pneumatic Carriage Clutch Assembly (194190000B)
Figure 11-27. Pneumatic Carriage Clutch Assembly
Fig ref.
Part number
Description
Qty
1
816541
Valve, Exh, Quick, 1/4 Npt 1.57 Cv
1
2
801526
1
3
810996
Muffler, Quiet Flow 3/8
Reducer-hex Nipple Brass
4
801458
Ftg, Conn, 1/4 Od Tbg Push-on X
1/4 Npt Male
1
1
Table 11-29: Pneumatic Carriage Clutch Assembly
11.31 Pneumatic Carriage Clutch Assembly (194190-000B)
11-59
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.32 Pneumatic FRL Assembly (194191-000B)
Figure 11-28. Pneumatic FRL Assembly
Fig ref.
Part number
Description
1
822680
Valve, Shut-off, Slide Gate, 1/2 Npt
1
2
822555
1
3
822556
Filter Rgltr
Lubricator
4
801396
Ftg, Elbow, Street, 1/2 Npt Female
X 1/2 Npt Male
2
5
801539
Ftg, Bush, 1/2 Npt Male X 1/4 Npt
Female Brass
1
6
819519
Ftg, Barb, 1/2 Hose X 1/2 Npt,
Male, Brass
1
Table 11-30: Pneumatic FRL Assembly
11-60
11.32 Pneumatic FRL Assembly (194191-000B)
Qty
1
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.33 Pneumatic Scrap Cylinder Assembly (194192000A)
Figure 11-29. Pneumatic Scrap Cylinder Assembly
Fig ref.
1
Part number
Description
810459
Ftg, Elbow, 1/4 Od Tbg Push-on X
Qty
2
1/8 Npt Male
Table 11-31: Pneumatic Scrap Cylinder Assembly
11.33 Pneumatic Scrap Cylinder Assembly (194192-000A)
11-61
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.34 Pneumatic Pressure Regulator Assembly
(194193)
Figure 11-30. Pneumatic Pressure Regulator Assembly
Fig ref.
Part number
Description
1
188620
Bkt, Regulator
1
2
814862
2
3
810410
Fsnr, Nut, Plastic
Regulator, Pressure, 1/4, 5-100 Psi
4
801460
Ftg, Elbow, 1/4 Od Tbg Push-on X
1/4 Npt Male
4
5
810411
Gauge, Pressure, 1-1/2 Dia.,
2
Table 11-32: Pneumatic Pressure Regulator Assembly
11-62
11.34 Pneumatic Pressure Regulator Assembly (194193)
Qty
2
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.34 Pneumatic Pressure Regulator Assembly (194193)
11-63
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.35 Scrap Removal Assembly (242557)
Figure 11-31. Scrap Removal Assembly
11-64
11.35 Scrap Removal Assembly (242557)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
215488-000A
Scrap Removal Core Assembly
(Refer To Section “11.36 Scrap
Removal Core Assembly (215488000A)” on page 11-66 For Breakdown Of Assembly)
1
2
119899
1
3
119900
Rlr, Scrap Ts-37n
Shft, Idler, Scrap Ts-37n
1
4
119901
Plt, Rlr, Scrap, Lh Mach
1
5
119902
Spool, Scrap, Ts-37
2
6
119906
Bkt, Rlr, Vert Ts-37n
1
7
119907
Guide, Scrap, Ts-37
1
8
202177
Bkt, Mtg, Spool, Scrap Rh
1
9
800466
Wshr, Oilite, 0.507 X 0.750 X 1/16
Thk,
2
10
802786
Brg, Cart, 1/2 X 1-1/8 X 5/16 Lg,
Shielded, Press
2
11
810408
Cyl, Air, 3/4 Bore, 7 Stroke, Blk Mnt
Double Act
1
12
800323-012
Fsnr, Bolt, Shldr, 3/8 Dia X 1-3/4
Lg,
2
Table 11-33: Scrap Removal Assembly
11.35 Scrap Removal Assembly (242557)
11-65
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.36 Scrap Removal Core Assembly (215488-000A)
Figure 11-32. Scrap Removal Core Assembly
11-66
11.36 Scrap Removal Core Assembly (215488-000A)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
230170
Mtg, Disk, Outer, Tapered Ts37
1
2
215538
2
3
119898
Disk, Scrap, Elliptical
Plt, Frict, Clutch, Ts-37n
1
4
119903
Hub, Mtg, Scrap Disk, Ts-37n
2
5
119904
Assy, Spkt, Idl, 40b20, 3/4 Id, Ts37n
1
6
191350-004
Plt, Nut, 3/8 X 1/2 X 4-1/2, 1/4-20
2
7
194096
Frame, Rem, Scrap Ts-37
1
8
194097
Bkt, Brg, Mtg Ts-37ne Scrap Wind
1
9
230177
Wldmt, Shaft, Scrap Disk, Tapered
1
10
194100
Hub, Brg, Thrust
1
11
194101
Wldmt, Shaft, Adj
1
12
194102
Bkt, Retainer, Shaft
1
13
194103
Strap, Reinforcement Scrap
1
14
819512
Spring, Comp, 1.095 Od X 1" Lg
1
15
815938
Brg, Thrust, Ball, 3/4 Id, 1-21/32 Od
35/64 Wide
1
16
810412
Knob, Iron, 4 Prong, 3/4-10 Tap
Through Bore
1
17
810397
Bush, Oilite, 0.3135 X 0.3770 X 3/8
Lg,
1
18
803667
Collar, Shaft, Set Screw, 1/4
2
19
812519
Wshr, Oilite, 0.2550 X 0.5000 X 1/
16 Thk
2
20
802744
Brg, Flg, 3/4 Id, 2-bolt, 3.53 Mtg
Holes
2
Table 11-34: Scrap Removal Core Assembly
11.36 Scrap Removal Core Assembly (215488-000A)
11-67
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.37 Film Forming Assembly (242553)
Figure 11-33. Film Forming Assembly
11-68
11.37 Film Forming Assembly (242553)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
227884
Table, Forming Ts-37, As Shown,
2
194147
3
1
Lh Machine
1
120015
Plt, Mtg, Shaft, Slide
Pivot, Rod, Film Form, Ts-37
2
4
227886
Plt, Keeper, Nut, Adj
1
5
232316
Nut, Adj, 5/8-11
1
6
194148
Screw, Adj, Film Table 6 1/2
1
7
194146
Blk, Bush, Film Table
4
8
194149
Plt, Support, Shaft, Slide Ts-37
1
9
194150
Shaft, Support, Film Table
2
10
120022
Rlr, Nose Ts-37n
1
11
120023
Blk, Guide, Forming, Ts-37
2
12
120024
Blk, Nut, Ts-37
2
13
120025
Tube, Slide, Ts-37
1
14
120026
Bkt, Mtg, Slide Rod Ts-37n
1
15
120027
Rod, Slide Ts-37n
1
16
120028
Wldmt, Rod, Forming, Ts-37n
1
17
120029
Hldr, Rod Ts-37
2
18
142283-000A
Wldmt, Guide, Side, Ts-37ne
1
19
250089
Wldmt, Former, Support, Film Ts37,
Lh
1
20
120037
Rod, Low Prod, 2" Long Ts-37
2
21
120038
Rod, 4 1/4 - 6 5/16, 10" Long, Ts-37
2
22
120039
Rod, 0-3", 6" Long,
2
23
120041
Guide, Side, Mod, Ts-37
2
24
119867
Spcr, Brass, Ts-37
2
25
193985
Bkt, Mtg, Rod, Film
1
26
120042
Rod, Adj Ts-37, 10" Lg
1
27
810487
Handwheel, 4.5, Dia, Al, Diecast W/
handle
1
28
802751
Brg, Flg, 1/2 Id, 2-bolt Light-duty
1
29
810557
Brg, Rulon Lr, 1/2 Id X 3/4 Od X 3/4
Lg
4
30
810653
Brg, Rod End, 3/8 Id, Male, 3/8-24
Threaded End, Commercial
2
31
810496
Brg, Flg, 1/2 Id, 2 Bolt, Die Cast
Lube-aign
1
32
800323-008
Fsnr, Bolt, Shldr, 3/8 Dia X 1 Lg
1
Table 11-35: Film Forming Assembly
11.37 Film Forming Assembly (242553)
11-69
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
33
194151
Bkt, Support, Table Ts-37ne
1
34
171614
Spcr, 3/8 X 3/4 X 2 Lg, S.s.
2
35
171680-001
Rod, Th'd, 3/8-16, Crs "A" = 4 3/4
2
36
811914
Knob, 4 Prong, 3/8-16, Br Ins
2
37
836881
Counter, Position, 1/2 Id,
1
Table 11-35: Film Forming Assembly
11-70
11.37 Film Forming Assembly (242553)
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.37 Film Forming Assembly (242553)
11-71
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.38 TS-37 Photo Eye Assembly (194024-000A)
Figure 11-34. TS-37 Photo Eye Assembly
11-72
11.38 TS-37 Photo Eye Assembly (194024-000A)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
236430
Bkt, Mtg, Holder, Eye, Lh
1
2
236431
1
3
191339
Bkt, Eye, Vert, Lh Mach
Bkt, Eye, Mtg, Vert
1
4
191340
Blk, Clamp, Eye
1
5
191344
Stabilizer, Eye
1
6
802676
Hdl, Adj, Zinc, 1.77 Lg 1/4-20 X
1.18 Stud
1
7
903576
Ss Sheet 10ga, 304, #4 Finish
Laser Vinyl
265
8
903575
Ss Sheet 10ga, 304, #2b Finish
330
9
902581
Ss Tbg 2-1/2 Od X 1/4 Wall, 304
1.5
Table 11-36: TS-37 Photo Eye Assembly
11.38 TS-37 Photo Eye Assembly (194024-000A)
11-73
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.39 Seal Head Assembly (191423-000D)
Figure 11-35. Seal Head Assembly
11-74
11.39 Seal Head Assembly (191423-000D)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
191416
Bar, Cross, Stop
1
2
191417
Frame, Seal, Side, LH
1
3
191418
Frame, Seal, Side, RH
1
4
191419
Bar, Cross, Bottom
1
5
119993
Blk, Pillow, Thomson
4
6
119994
Spacer, Cyl
1
7
119995
Blk, Thomson, Sealbar
4
8
119996
Blk, Wear, Chain
4
9
119997
Carrier, Seal Bar, Lower
1
10
119998
Spacer, Sealbar, Lower
1
11
191420
Blk, Takeup
2
12
186997
Spkt, 35B16, 1” Bore
2
13
191421
Shaft, Top, Sealhead
1
14
120003
Blk, Mtg, Carrier
2
15
120004
Bar, Stop, Clamp
1
16
120005
Stop, Seal Bar
1
17
120006
Plt, Brg, Retaining
4
18
120007.282
Shaft, Thomson, Crs, 1/2 Dia
2
19
192725
Spkt, Idler
2
20
180117-000C
Assy, Chain, Seal Head (Refer To
Section “11.40 Seal Head Chain
Assembly (180117)” on page 11-77
For Breakdown Of Assembly)
1
21
180117-001C
Assy, Chain, Seal Head W/Flag
(Refer To Section “11.40 Seal Head
Chain Assembly (180117)” on
page 11-77 For Breakdown Of
Assembly)
1
22
120012
Cyl, Air, Flat, 1 1/2 B Mod
1
23
810541
Bush, Ball, 1/2 x 7/8 Ssmart
8
24
808264
Bsh, Oil, 1/2 x 7/8 x 3/16
2
25
802924
Ring, Seal, 1/2 x .879
8
26
810549
Conn, 1/8 Npt to 5/16 Hose
2
27
810550
Cplg, Align, 3/8-24 M,F
1
28
800557
Collar, Shaft, Set Screw, SS
2
29
806464
Hdl, Adj, Zinc, 3/8-16 Th’d
2
30
142171
Channel, Seal Bar, Lower
1
31
184086
Pad, Silicone, 3/8 x 1/2
1
32
222073
Bkt, Prox
1
Table 11-37: Seal Head Assembly
11.39 Seal Head Assembly (191423-000D)
11-75
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
33
Part number
Description
800607
Collar, Shaft, Clamp, 2-piece, 1/2,
Qty
2
Ss,
34
816415
36
171588
37
171589
Long Box Spacer As Per Dwg
#27214-a,
1
38
812497
Brg, Cart, 5/8 X 1-3/8 X 7/16 Lg,
2
39
802939
Bush, Trantorque, 5/8 X 1 X 1-1/8,
Mini, 5/8 Lg Expanding
1
40
124843
Spkt, 35b16, Mod, 0.625 Bore,
1
41
222074
Plt, Nut, Prox,
1
42
810301
Hdl, Adj, Zinc, 1-5/16 Lg, #10-32 X
.59 Stud
1
43
814516
Tape, Teflon Coated Fiberglass 2"
X 18, Yd W/acrylic Adhesive
.01
44
810162
Rule, Adhesive, Mylar, 1/2w X 1/2ft,
Left To Right
2
Cushion Adjustable .5 Id,
Short Box Spacer As Per Dwg
#27213-a,
Table 11-37: Seal Head Assembly
11-76
11.39 Seal Head Assembly (191423-000D)
2
1
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.40 Seal Head Chain Assembly (180117)
Figure 11-36. Seal Head Chain Assembly
Fig ref.
Part number
Description
Qty
1
164453-000C
Attachment, Chain, #35, K-1, Mod,
4
Crs, 2 Pc Set
2
178243-000A
3
800459
Flag, Prox,
Chain, Rlr, #35, Rlr Rvt, (Hanagatag9000408)
1
4
800521
Link, Conn, #35, Offset,
1
5
819454
Link, Conn, Attach, #35, K-1, Bent
Lug, 2 Sides
4
6
819454
Link, Conn, Attach, #35, K-1, Bent
Lug, 2 Sides 1
5
3.9
Table 11-38: Seal Head Chain Assembly
11.40 Seal Head Chain Assembly (180117)
11-77
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.41 Variable Sheave Drive Assembly (194182000A)
Figure 11-37. Variable Drive Sheave Assembly
11-78
11.41 Variable Sheave Drive Assembly (194182-000A)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
142192
Plt, Mtg, Sheave, Ts-37n
1
2
162869
Conveyor Tie Rod 1/2 Dia Ss 8" Lg.
1
3
175867
As, Per Dwg #11866
Rod, Adj, 1/4, Ss, 5.500 Lg,
1
4
186413
Spkt, 40b14, Mod, 0.875 Bore,
1
5
186414
Spkt, 40b13, Mod, 0.875 Bore,
1
6
134711
Spkt, 40b36, Mod, 1.000 Bore,
2
7
800462
Chain, Rlr, #40, Rlr Rvt,
4
8
800502
Link, Conn, #40,
2
10
177416
Screw Adjustment Block As Per
Dwg, #32464-a
4
11
175864
Drive Shaft As Per Dwg #33060-a,
1
12
175865
Driven Shaft As Per Dwg #33061-a,
1
13
175874
Rod, Alignment, 8.000 Lg,
1
14
811547
Sheave , Vs 7/8b,
1
15
811549
Sheave 7/8b,
1
16
812492
Brg, Flg, 7/8 Id, 4-bolt, Use, Dodge
Brand Only(10
4
17
811391
Belt-vs 1422v270 Gates,
1
Table 11-39: Variable Sheave Drive Assembly
11.41 Variable Sheave Drive Assembly (194182-000A)
11-79
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.42 Electrical Assembly (TS37-ELEC)
74
72
75
21
54
55
15
16 17 12 13 73 13
38 37 40 41 42 43 44 45
28,29
1
76 14
78
39
18
19
21
46
47
48
49
50
23
21
3
20
53
24
8
6
9
7,11
10
4
52
5
2
Figure 11-38. Electrical Assembly
11-80
11.42 Electrical Assembly (TS37-ELEC)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
122428
Enclosure, Electrical, Control, Ts37
2
194185
1
Includes Subpanel
Enclosure, 12x 20x 09 Nema12
1
Consl With-cutouts-for-hc37/ts33/
3
804993-138
ts37
Power Supply 24vdc 3.0amp
4
804004-007
Push Button, 30mm Guarded Grn
1
1
Ill 120v Momentary 1no/1nc Nema4
5
804004-008
Push Button, 30mm Extended Red
Momentary 1no/1nc Nema4
1
6
804004-010
Push Button, 30mm Flush Blk
Momentary 1no/1nc Nema4
1
7
804004-003
Push Button, 30mm Mushroom
1
Red Ill 120v Push-pull 1no/1nc
Nema4 (Ac Only)
8
804004-013
Push Button, 30mm Flush Yel
Momentary 1no/1nc Nema4
1
9
804004-009
Push Button, 30mm Flush Grn
Momentary 1no/1nc Nema4
1
10
804027-001
Legend Plate, Blank Standard Gray
5
11
804027-003
Legend Plate, Blank Standard Red
1
12
804000-331
Circuit Breaker, 1p 30a 240v
Trip=05-10 Ir=10ka Ul489
1
13
804000-325
Circuit Breaker, 1p 5a 277v
Trip=05-10 Ir=10ka Ul489
3
14
804000-073
Circuit Breaker, 1p 5a 250v Ir= 1ka
Ul1077 High Density
4
15
804000-313
Circuit Breaker, 2p 10a 277v
Trip=10-20 Ir=10ka Ul489
1
16
804002-005
Contactor, Iec 30a Coil=120vac
1
1no Line-side-coil
17
804035-016
Contact, Aux. 4no, Top Mounted
1
For Iec Contactors 100-c All
18
804008-006
Relay, Control 3pdt Coil= 24vdc
10a
1
19
804008-005
Relay, Socket 3pdt 11-pin
10a
1
Table 11-40: Electrical Assembly
11.42 Electrical Assembly (TS37-ELEC)
11-81
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
20
804008-107
Relay, Extra Slim, Spdt
Qty
1
Coil=115vac 6a W/led Revpol&coil-surge-protect
21
804008-089
Relay, Control 1pdt Coil= 24vdc
1a, Terminal-block-style W/socket
2
22
804025-019
Switch, Door, Magnetic Interlock
2
Prewired 1N0 Flex Cable
23
804008-023
Relay, Solid-state 1pst Coil=24+vac
50a Input=24-265vac
Outut=230vac
1
24
804023-037
Temperature Controller, 1/16 Din,
Tc/mv/rtd, 100-240vac, 1 Rly
Alarm,
1
25
804012-009
Drive, Dc, 0.50/1.00hp 115/230v
1
5.0a (W/heatsink 1.0/2.0hp, 10.0a)
26
804012-011
Drive, Two Terminal Connector For
Inhibit Circuit
1
27
804030-020
Resistor, 10.0k 2.00w,
Potentiometer, Not Lockable
1
28
804012-286
Drive, Ac, 1.00hp 230v 1 Ph 3.6a
Vector Drive For Ffs
1
29
804012-264
Drive, Ac, Operator Keypad Use
1
With Part # 804012.262 Or
804012.263
30
804007-001
Photo Sensor, Transmitter Dc
Qd, Range=30ft W/6in-pigtail
1
31
804007-003
Photo Sensor, Reciever Dc Pnp
Qd, Range=30ft W/6in-pigtail
1
32
804003-135
Cable, Sensor Qd, 16ft Straight
2
33
804007-115
Micro 4-pin Black Pvc
Photo Sensor, Background Dc Npn/
1
pnp Range=2m W/2m-cbl Nema1
34
804006-130
Proximity Sensor, Dc 2-wire 4.0mm
4
No Qd 12mm Unshielded Shortbarrel
35
804003-139
Cable, Sensor Qd, 16ft 90-degree
Micro 4-pin Black Pvc
Table 11-40: Electrical Assembly
11-82
11.42 Electrical Assembly (TS37-ELEC)
4
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
36
804013-005
Encoder, Incremental 100ppr
12/24v Shaft= 3/8in Output=pnp
1
37
804005-142
Plc, Slc500, Cpu 16kb (5/05)
Rs-232, Ethernet
1
38
804005-008
Plc, Slc500, Power Supply Ac
5a 120/240vac 5a@5vdc
0.96a@24vdc
1
39
804005-021
Plc, Slc500, Rack 07-slot
1
40
804005-025
Plc, Slc500, Digital 16in
24vdc Sinking
1
41
804005-070
Plc, Slc500, Digital 16in
24vdc Sinking Fast (0.3ms)
1
42
804005-147
Plc, Slc500, Digital, 16out
16out 24vdc Source
1
43
804005-031
Plc, Slc500, Digital 16out
Relay
1
44
804005-278
Plc, Slc500, Digital Combinat,
06in 24vdc, 06out Relay
1
45
804005-033
Plc, Slc500, Analog 4out
Voltage 16bit W/sign
1
46
804993-118
Plc, Ifm Cable 0.1 Meter, For Ib16
2
Digital 1746 Dc I/o Modules
47
804993-121
Plc, Ifm Cable 0.1 Meter, For
Ob16,ob16e Digital 1746 I/o Modules,
1
48
804993-127
Plc, Ifm Cable 0.1 Meter, For
1
Ow16,ox8 Digital 1746 I/o Modules,
N-type
49
804993-130
Plc, Ifm Cable 0.2 Meter, For No4v
Analog 1746 Modules, B-type
1
50
804993-133
Plc, Ifm Base, Digital, 20pt, 2-level,
Narrow
4
51
804993-134
Plc, Ifm Base,analog Out Module,1746
1
52
804018-093
Operator Interface, Panelview Plus
1
700, Color, Touch, Dc, Enet & Rs232, 64mb
Table 11-40: Electrical Assembly
11.42 Electrical Assembly (TS37-ELEC)
11-83
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
53
804005-273
Plc, Ethernet Switch,10/100 Base
5 Ports Din Rail Mounted, Require
24vdc
1
54
804029-004
Receptacle,gfi,110v,1ph,use
W/804014.081 Ground Fault Interrupter,
1
55
804014-081
Enclosure, Moistureproof Box For
Switch
1
56
804994-246
Cable, 10c, 16 Awg, 6 Ft, Ul St00w,
Mini Male (Straight) To Flying
Leads
1
57
804010-110
Connector, 10p, Mini Female
1
(Straight), Panel Mount Mate
58
804996-514
Connector, 8p, Mini Female
1
(Straight), 12in Flying Leads (Use
W/804994-240)
59
804995-170
Connector, 2p, Female Receptacle,
2@13a, 900vac, Solder Contacts
(Newark
1
60
804995-169
Connector, 2p, Male Plug, Straight,
2@13a, 900vac, Solder Contacts
(Newark
1
61
804995-168
Connector, Accessory, Cable
1
Clamp, Type An3057, For Size
16(S) Shell
62
804994-910
Connector, Strain Relief, 90deg,
0.620-0.750
1
63
999999-003
Wiring Mat'l Per Machine Typical
1
Normal Usage
64
804010-184
Connector, Insert, 16p Female 14-
1
20awg 16a 600v Screw #01-#16
(Hbe Series)
65
804010-185
Connector, Insert, 16p Female 14-
1
20awg 16a 600v Screw #17-#32
(Hbe Series)
66
804010-191
Connector, Insert, 6p Female 1020awg 16a 600v Screw #01-#06
(Hbs Series)
Table 11-40: Electrical Assembly
11-84
11.42 Electrical Assembly (TS37-ELEC)
1
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
67
804010-192
Connector, Insert, 6p Female 10-
1
20awg 16a 600v Screw #07-#12
(Hbs Series)
68
804010-196
Connector, Housing, Size 32 Dou-
2
ble Locking Latch (Hbe Series)
69
804010-187
Connector, Accessory, Housing
2
Cover For Panel Mount (Hbe 32
Series)
70
804010-207
Connector, Housing, Ethernet-
1
pass-thru For-bulkhead-w/2-rj45ports (Cat 5e)
71
804000-393
Circuit Breaker, 1p 5a 277v
Trip=10-20 Ir=10ka Ul489
1
72
804008-023
Relay, Solid-state 1pst Coil=24+vac
1
50a Input=24-265vac
Outut=230vac
73
804000-325
Circuit Breaker, 1p 5a 277v
1
Trip=05-10 Ir=10ka Ul489
74
804008-063
Relay, Solid-state Coil=4...20ma
1
25a Input=analog Output=90280vac
75
804024-059
76
804000-437
Transformer, 1ph 0.50kva 120/240|
1
12/24 Buck-boost
Circuit Breaker, 2p 20a 277v
1
Trip=05-10 Ir=10ka Ul489
77
804995-077
Switch
1
78
805000-327
Circuit Breaker, 1p 10a 277v
1
Trip=05-10 Ir=10ka Ul489
Table 11-40: Electrical Assembly
11.42 Electrical Assembly (TS37-ELEC)
11-85
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.43 Polyolefin Seal Bar Assembly (Option)
(192665-000c)
Figure 11-39. Polyolefin Seal Bar Assembly
11-86
11.43 Polyolefin Seal Bar Assembly (Option) (192665-000c)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
192766
Carrier, Seal Bar
1
2
142150
Mnt, Guard, Pressure
1
3
142151
Post, Seal Bar, Rh
1
4
142152
Post, Seal Bar, Lh
1
5
142153
Extrusion, Seal Bar, Lh
1
6
142154
Extrusion, Seal Bar, Rh
1
7
142155
Plt, Nut, Seal Bar
2
8
142156
Blade, Seal Bar
1
10
142158
Shield, Seal Bar
2
11
142159
Spacer, Guard, Pressure
2
12
142160
Heater, Cartridge
1
13
142161
Spacer, Support, Element Wire
1
14
192662
Bkt, Mtg, Safety Switch
1
15
142163
Cover, Block Terminal
1
16
142164
Box, Junction
1
17
142165
Activator, Switch, Safety
1
18
142166-001
Pad, Seal, Felt
1
19
142167-001
Pad, Seal, Silicone Rubber
1
20
142168
Plt, Name, Warning
1
21
142169
Ass’y, Thermocouple
1
22
142170
Support, Element, Wire
1
23
800321-009
Bolt, Shldr, 1/4 x 1
4
24
810727
Spring, Comp, .36 Od x 1 1/4
4
25
182145
Fsnr, Bolt, Shldr, 1/4 x 3/4 Mod
4
26
142166-001
Pad, Felt
1
27
804996-042
Block, Terminal
1
28
804995-178
Grip, Cord, Straight
1
29
804994-239
Cable, 3’, Male
1
30
804010-112
Connector, Terminal, Fork, Vinyl
Insulat, 16-14 Ga
13
31
804011-089
Conduit, Locknut, 1/2”
2
32
804006-001
Proximity Sensor, Dc 2-wire 4.0mm
1
33
810722
Sleeve, Rubber, Silicone Coated,
1
34
800321-010
#10, "Voltube"
Fsnr, Bolt, Shldr, 1/4 Dia X 1 Lg,
Ss,
4
35
804003-006
No Qd,
USE REPLACEMENT PART
#804003.139, CABLE, 16' WITH 90
1
Table 11-41: Polyolefin Seal Bar Assembly
11.43 Polyolefin Seal Bar Assembly (Option) (192665-000c)
11-87
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.44 Polyethylene Seal Bar Assembly
(Option)(192952)
5
7
10
21
17 22 13
4
16
12
15
8
20
6
11
14
1
23
2 24
Figure 11-40. Polyethelene Seal Bar Assembly
11-88
11.44 Polyethylene Seal Bar Assembly (Option)(192952)
3
25
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
192766
Carrier, Seal Bar
1
2
142150
Mnt, Guard, Pressure
1
3
142151
Post, Seal Bar, Rh
1
4
142152
Post, Seal Bar, Lh
1
5
180992
Extrusion, Seal Bar, Lh
1
6
180993
Extrusion, Seal Bar, Rh
1
7
142155
Plt, Nut, Seal Bar
2
8
180994
Blade, Seal Bar, Polyethelene
1
9
142157.002
Moulding, Protective (Not Shown)
1
10
142158
Shield, Seal Bar
2
11
142159
Spacer, Guard, Pressure
2
12
142160
Heater, Cartridge
1
13
142161
Spacer, Suppport, Element Wire
1
14
192662
Bkt, Mtg, Safety Switch
1
15
142163
Cover, Block Terminal
1
16
142164
Box, Junction
1
17
142165
Activator, Siwtch, Safety
1
18
142166.001
Pad, Seal, Felt
1
19
142167.001
Pad, Seal, Silicone Rubber
1
20
142168
Plt, Name, Warning
1
21
142169
Ass’y Thermocouple
1
22
142170
Support, Element, Wire
1
23
800321.009
Bolt, Shldr, 1/4 x 1
4
24
810727
Spring, Comp, .36 Od x 1 1/4
4
25
182145
Fsnr, Bolt, Shldr, 1/4 x 3/4 Mod
4
Table 11-42: Polyethelene Seal Bar Assembly
NOTE: Item 18 or 19 (not shown) to be assembled on final assembly.
NOTE: Item 9 used during mfg process, not assembled on final assembly.
11.44 Polyethylene Seal Bar Assembly (Option)(192952)
11-89
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.45 Bridge Assembly (Option) (193984-000b)
Figure 11-41. Bridge Assembly
11-90
11.45 Bridge Assembly (Option) (193984-000b)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
119972.002
Rlr, 5/8 Od, 6.609 Lg
1
2
800569
Collar, Setscr, 3/8 Id
2
3
814363
Cyl, Air, 1-5/8 Bore
1
4
177159.001
Shft, Rlr, Mid, Bridge
1
5
188645
Plt, Slide
1
6
144928.001
Shaft, Guide
2
7
194070.001
Arm, Bridge, Lh
1
8
194070
Arm, Bridge, Rh
1
9
142285
Plt, Mtg, Brg
1
10
194069
Bkt, Rlr, Bridge
1
12
812424
Ctrl, Flow, 1/4 Npt
2
14
142286
Bar, Pusher, Bridge
1
17
177157.001
Shaft, Rlr, Bridge
1
18
177159
Shaft, Rlr, Middle
1
19
177160
Rlr, Middle, Bridge
2
20
194071
Blk, Mtg, Cyl Bar
2
21
177176
Stud, Bridge Cyl
1
22
177177
Spacer, Cyl, Bridge
1
23
177178
Blk, Bearing, Bridge
2
24
177179
Plt, End, Blk, Brg
2
26
812504
3/8 Bore Ball Bsh
4
27
812505
Seal, Grease, 3/8 Id
4
28
800444
Wshr, Oilite, 0.390 X 0.750 X 1/32
Thk
4
29
815213
Wshr, Oilite, 0.255 X 0.625 X 1/16
Thk,
2
32
817001
Blt, 7-1/2 W x 138 Lg
1
35
813694
Fsnr, Nut, Mtg, Panel
2
36
816656
Valve, Sol, 24VDC, 1/4 NPTF,
Light, Single SOL
1
Table 11-43: Bridge Assembly
11.45 Bridge Assembly (Option) (193984-000b)
11-91
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.46 Infeed Photo Eye Mounting Assembly (Option)
(215405)
Figure 11-42. Infeed Photo Eye Mounting Assembly
Fig ref.
Part number
Description
1
236620
Plt, Mtg, Eye, Adjustable
1
2
225170
Post, Eye,
1
3
215404
Plt, Pivot, Mtg, Eye,
1
4
225171
Bar, Cross, Eye,
1
Table 11-44: Infeed Photo Eye Mounting Assembly
11-92
11.46 Infeed Photo Eye Mounting Assembly (Option) (215405)
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.47 72” Lug Infeed Conveyor Assembly (Option)
(227914)
Figure 11-43. 120” Lug Infeed Conveyor Assembly
11.47 72” Lug Infeed Conveyor Assembly (Option) (227914)
11-93
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
1
227913
72” Infeed Conveyor Core Assembly Assy, Chain, Seal Head W/Flag
(Refer To Section “11.48 72” Infeed
Conveyor Core Assembly (Option)
(227913)” on page 11-95 For
Breakdown Of Assembly)
1
2
173409-000A
Lug Assembly (Refer To Section
“11.49 Lug Assembly (Option)
(173409-000A)” on page 11-97 For
Breakdown Of Assembly)
18
3
144129-002
Wldmt, Leg, Conv, Infeed, Crs
1
4
144131-002
Cover, Leg, Conv, Crs
1
5
142226
Ang, Mtg, Infeed, L.h.
1
6
142226-001
Ang, Mtg, Infeed, R.h.
1
7
142228
Bkt, Mtg, Infeed,
2
8
146109-003A
Wldmt, Foot, 5.125 Stud, Ss, 3/416
2
Table 11-45: 120” Lug Infeed Conveyor Assembly
11-94
11.47 72” Lug Infeed Conveyor Assembly (Option) (227914)
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.48 72” Infeed Conveyor Core Assembly (Option)
(227913)
Figure 11-44. Infeed Conveyor Core Assembly
11.48 72” Infeed Conveyor Core Assembly (Option) (227913)
11-95
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
1
136658
Spkt, 40a18, Mod, 1.125 Bore,
Special, For H-tlc-1000 Clutch
1
6
142233
Shaft, Idler, Ts-37n, Infeed
1
7
142997-001
Cam, Chain, Head, Hard Anodize
1
10
144134-002A
Blk, Takeup, Crs
2
11
144200-002A
Cover, Lug, Crs,
1
12
14440-002
Blk, Lube, 4 Pos,
1
13
144461-001
Cam, Tail, Chain, Lh,
1
14
816871
Motor, Gear, 1/2 Hp, 230vac, 90
Rpm, B5 Mtg Flange
1
16
146858-000A
Spkt, 40a30, Mod, 1.000 Bore,
Special,
2
17
168603
Blk, Takeup, Plated
2
18
169546
Cover, End, S.s.,
1
19
169546-001
Cover, End, S.s., Opposite Hand
1
20
172435
Cam, Tail, Chain, Rh, Plated
1
22
191350-001
Plt, Nut, 3/8 X 1/2 X 3 1/4, 1/4-20,
2
23
191425
Channel, Conv, Lh, Ts-37ne
1
24
191426
Channel, Conv, Rh, 72"
1
25
191427
Plt, Spacer, Motor,
1
26
191428
Xbar, Support,rail,
3
27
191429
Rail, Chain, Ts-37ne
1
28
191430
Bkt, Support, Plt, Top, Rh, Ts-37ne
Infeed
1
29
191431
Shaft, Drive, Conv, Ts-37ne Infeed
1
30
191432
Spkt, 40b17, Mod, 20mm Bore, 6
Mm Keyway
1
31
191433
Bkt, Switch,
1
32
191439-001
X-brace, Ts37ne Infeed, "A"=26 7/8
2
33
811731
Limiter Torque 1"Bore Standard
C&f Hubs, Oilite Bush,act.disc. Alle
1
34
800466
Chain, Rlr, #40, Hollow Pin,
35
802782
Brg, Flg, 1 Id, 2-bolt, Standard-duty
2
36
191430-001
Bkt, Support, Plt, Top, Lh, Ts-37ne
Infeed
1
Table 11-46: Infeed Conveyor Core Assembly
11-96
11.48 72” Infeed Conveyor Core Assembly (Option) (227913)
Qty
12’
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.49 Lug Assembly (Option) (173409-000A)
Figure 11-45. Lug Assembly
Fig ref.
Part number
Description
Qty
1
173408-000A
Lug, Infeed, Mod, "A" = 4 1/2
1
2
811928
Plunger-stby Sprng1/4-20x17/32,
1
3
147056
Pin, Pusher, W/head,
1
Table 11-47: Lug Assembly
11.49 Lug Assembly (Option) (173409-000A)
11-97
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.50 Miser Wheel Assembly (Option)(202365)
Figure 11-46. Miser Wheel Assembly
11-98
11.50 Miser Wheel Assembly (Option)(202365)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
119979
Bar, Top
1
2
119980
Blk, Pivot
1
3
119981
Arm, Pivot
1
4
119982
Ass’y Wheel
2
6
202363
Post, Mtg, Miser Wheel
1
7
810397
Bsg, Oil, 5/16 x 3/8 x 3/8
1
8
800322.004
Blt, Shldr, 5/16 x 3/4
1
9
800323.017
Blt, Shldr, 3/8 x 2 1/4
2
10
807557
Clr, Clmp, 3/8 B, Set Scrw, SS
2
11
812201
Spr, Die, 9/32 x 1/2 x 1
1
Table 11-48: Miser Wheel Assembly
11.50 Miser Wheel Assembly (Option)(202365)
11-99
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.51 Caster Assembly (Option)(257570)
Figure 11-47. Caster Assembly
Fig ref.
Part number
Description
1
803067
Caster, 5", Blue, Swivel, (5x915),
2
250467
Qty
4
Polyurethane Soft
Wldmt, Bkt, Caster, Crs
Table 11-49: Caster Assembly
11-100
11.51 Caster Assembly (Option)(257570)
4
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.52 Product Guides Assembly (Option) (266607)
Fig ref.
1
Part number
Description
266608
Guide, Prod, 10', 3-1/2, T-lug
Qty
2
(Guard)
2
144124-104
Shaft, 1.000, Tapped, 5/16-18,
6
3
168608
2.926 Lg Alum
Arm, Guide, Plated, "A" = 7 13/16
6
4
810475
Hdl, Adj, Ss, 2.16 Lg, Plas, 5/16-18
X 1.18 Lg Stud
12
Table 11-50: Product Guides Assembly
11.52 Product Guides Assembly (Option) (266607)
11-101
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.53 High Product Former Assembly - Inverted
(Option) (138240)
4
10
3
9
1
15
2
6
7
8
11
12
14
5
13
Figure 11-48. High Product Former Assembly - Inverted
11-102
11.53 High Product Former Assembly - Inverted (Option) (138240)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
138238
Rod, Forming, 20” Lg
2
2
138241
Rod, Support, Former
1
3
142288
Clamp, Rod, Guide
4
4
142289
Rod, Guide
2
5
142290
Wldmt, Rod, Forming
1
6
142291
End, Rod, Fmg, Film 3 1/2”
1
7
142291.001
End, Rod, Fmg, Film 7 1/2”
1
8
133935
Blk, Rod, Conv
1
9
183882
Wldmt, Former, Film
1
10
183888
Support, Film
1
11
183896
Plt, Clamp, Lower
1
12
183898
Plt, Clamp, Upper
1
13
188450
Plt, Support, Vertical
1
14
188451
Plt, Nut
1
15
816334
Ring, Snap, Crescent
1
Table 11-51: High Product Former Assembly - Inverted
11.53 High Product Former Assembly - Inverted (Option) (138240)
11-103
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.54 High Product Assembly (Option)(188452)
9
8
1
10
11
2
5
3
6
7
4
Figure 11-49. High Product Assembly
11-104
11.54 High Product Assembly (Option)(188452)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
138238
Rod, Forming, 20” Lg
2
2
138239
Plt, Nut, Clamp
1
3
138241
Rod, Support, Former
1
4
142290
Wldmt, Rod, Forming
1
5
142291
End, Rod, Fmg, Film 3 1/2”
1
6
142291.001
End, Rod, Fmg, Film 7 1/2”
1
7
144935
Blk, Rod, Conv
1
8
183882
Wldmt, Former, Film
1
9
183888
Support, Film
1
10
183898
Plt, Clamp, Upper
2
11
816334
Ring, Snap, Crescent
1
Table 11-52: High Product Assembly
11.54 High Product Assembly (Option)(188452)
11-105
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.55 Film Label Support Assembly (Option)
(188452)
3
4
2
1
Figure 11-50. Film Label Support Assembly
11-106
11.55 Film Label Support Assembly (Option) (188452)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
138241
Rod, Support, Former
1
2
144935.002
Blk, Rod, Conv
1
3
177700
Support, Film
1
4
177747
Bkt, Support, Film
3
Table 11-53: Film Label Support Assembly
11.55 Film Label Support Assembly (Option) (188452)
11-107
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.56 Hole Punch Assembly - Polyethelyne (Option)
(188546)
3
5
6 20 26
13
32
28
24,30
29
10
9
27
31
7
14
25
16
4
26
15
Figure 11-51. Hole Punch Assembly - Polyethelyne
11-108
11.56 Hole Punch Assembly - Polyethelyne (Option) (188546)
2
1
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
144746.001
Plt, Mtg, Cyl
2
2
174467
Spcr, Cyl
4
3
143422.084
Shaft, .500 Dia x 3.375 Lg
2
4
174466
Plt, Adj, Cyl
2
5
177727
Spcr, Hole Punch
2
6
141886
Bar, Cyl, Hole Punch
1
7
141887
Bar, Die Hole Punch
1
8
144745.001
Blk, Mtg, Die
2
9
142136.741
Rlr, Idler, 1-1/2 x 46 9/16
1
10
142137.748
Shaft, G & P, 1/2 Dia
1
11
175250
Elbow 1/4 Fpt x 1/4 Npt
2
12
175251
Tee, Male, 1/4 Npt x 1/4 Fpt
1
13
813006
1/4 Npt to 5/16 Elbow
4
14
810167
Adapter, 1/4 Fpt x 1/8 Mpt
2
15
800316.007
Pin, Roll, 1/8 Dia x 3/4 Lg
2
16
803621.003
Pin, Dowel, 1/4 x 1 S.S.
4
17
812360
Coupling, 3/4
1
18
812991
5/16 Clear Tubing
10
19
813686
Hex Male 5/16 x 1/4 Npt
1
20
807771
Punch Holder Reducer
2
21
814797
Air Hose, Coiled
2
22
815539
Nipple, Close, 1/8 Npt
2
23
807768
Cyl, Continuous
2
24
815731
Valve, Solenoid, 24VDC
2
25
813711
Die, 1/4” Butterfly
2
26
813710
Puch, Ball, 1/4
2
27
810411
Guage, Pressure, 1-1/2 Dia
2
28
810410
Regulator, Pressure
2
29
800446
Wshr, Oilite, .507 x .75
2
30
813812
Muffler, 1/8”
2
31
810958
Elbow, Street, 1/8
2
32
813005
Fitting, Tee, 5/16
1
Table 11-54: Hole Punch Assembly - Polyethelyne
11.56 Hole Punch Assembly - Polyethelyne (Option) (188546)
11-109
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.57 Hole Punch Assembly - Polyolefin (Option)
(215611)
3
5
6
20 26
13
2
32
28
24,30
29
10
9
27
31
7
14
25
16
4
8
15
Figure 11-52. Hole Punch Assembly- Polyolefin
11-110
11.57 Hole Punch Assembly - Polyolefin (Option) (215611)
2
1
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
144746.001
Plt, Mtg, Cyl
2
2
174467
Spcr, Cyl
4
3
143422.084
Shaft, .500 Dia x 3.375 Lg
2
4
174466
Plt, Adj, Cyl
2
5
177727
Spcr, Hole Punch
2
6
141886
Bar, Cyl, Hole Punch
1
7
141887
Bar, Die Hole Punch
1
8
144745.001
Blk, Mtg, Die
2
9
142136.741
Rlr, Idler, 1-1/2 x 46 9/16
1
10
142137.748
Shaft, G&P, 1/2 Dia
1
11
175250
Elbow 1/4 Fpt x 1/4 Npt
2
12
175251
Tee, Male, 1/4 Npt x 1/4 Fpt
1
13
813006
1/4 Npt to 5/16 Elbow
4
14
810167
Adapter, 1/4 Fpt x 1/8 Mpt
2
15
800316.007
Pin, Roll, 1/8 Dia x 3/4 Lg
2
16
803621.003
Pin, Dowel, 1/4 x 1 S.S.
4
17
812360
Coupling, 3/4
1
18
812991
5/16 Clear Tubing
10
19
813686
Hex Male 5/16 x 1/4 Npt
1
20
807771
Punch Holder Reducer
2
21
814797
Air Hose, Coiled
2
22
815539
Nipple, Close, 1/8 Npt
2
23
807768
Cyl, Continuous
2
24
815731
Valve, Solenoid, 24 VDC
2
25
802489
Die, 1/8”, Butterfly
2
26
806538
Punch, Ball, 1/8”
2
27
810411
Guage, Pressure, 1-1/2 Dia
2
28
810410
Regulator, Pressure
2
29
800446
Wshr, Oilite, .507 x .75
2
30
813812
Muffler, 1/8”
2
31
810958
Elbow, Street, 1/8
2
32
813005
Fitting, Tee, 5/16
1
Table 11-55: Hole Punch Assembly - Polyolefin
11.57 Hole Punch Assembly - Polyolefin (Option) (215611)
11-111
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.58 Low Profile Guide Assembly Without Miser
Wheels (Option) (194201)
1
2
3
Figure 11-53. Low Profile Guide Assembly Without Miser Wheels
11-112
11.58 Low Profile Guide Assembly Without Miser Wheels (Option) (194201)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
144479
Spacer
2
2
172656
Bkt, Guide
2
3
194020
Guide, Pkg
1
Table 11-56: Low Profile Guide Assembly Without Miser Wheels
11.58 Low Profile Guide Assembly Without Miser Wheels (Option) (194201)
11-113
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.59 Low Profile Guide Assembly With Miser
Wheels (Option) (203350)
1
2
3
Figure 11-54. Low Profile Guide Assembly With Miser Wheels
11-114
11.59 Low Profile Guide Assembly With Miser Wheels (Option) (203350)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
172656
Bkt
2
2
144479-001
Spacer
2
3
202349
Guide, Prod, Low
1
Table 11-57: Low Profile Guide Assembly With Miser Wheels
11.59 Low Profile Guide Assembly With Miser Wheels (Option) (203350)
11-115
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.60 Dual Encoder Drive Assembly (Option)
(194184)
16
2
9
3
11
15
21
1
14
8
5
4
6
10
7
11
13
12 17
19,20
Figure 11-55. Dual Encoder Drive Assembly
11-116
11.60 Dual Encoder Drive Assembly (Option) (194184)
18
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
102151.001
Pul, Drv, Encdr
1
2
102152
Pul, Drvn, Encdr
2
3
194052
Bkt, Mtg, Encdr
1
4
120049.001
Post, Mtg, Take Up
1
5
120051
Shaft, Drive, Upper
1
6
138180
Plt, Mtg, Take Up
1
7
188561
Spacer, G-Box
2
8
138167
Plt, Take Up
1
9
138480
Shaft, Drv, Lower
1
10
123722
Spkt, 40B18, Mod, 1.000 B
1
11
128810
Spkt, 40B22, Mod, 1.000 B
2
12
128811
Spkt, 40B20, Mod, 1.000 B
1
13
128191
Spkt, 40B21, Mod, 1.000 B
1
14
800906
Spkt, 40BB17H, Idler
3
15
810346
Blt, Tmg, 1.5P, 1/4 W, 23 Lg
1
16
806567
Brg, Pillow Blk, 1 Id
4
17
808445
Gearbox, F721, 20:1, 56C
1
18
810613
Motor, 1 Hp, Syncro
1
19
800462
Chain, Rlr, #40
26.7
20
800502
Link Conn, #40
5
21
142187
Assy, Rlr, Drive, Rubberized
1
Table 11-58: Dual Encoder Drive Assembly
11.60 Dual Encoder Drive Assembly (Option) (194184)
11-117
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.61 Easy Open Perforator Wheel Assembly
(Option) (194184)
Figure 11-56. Easy Open Perforator Wheel Assembly
11-118
11.61 Easy Open Perforator Wheel Assembly (Option) (194184)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
Qty
1
231987
Perforator Support Roller "A" = 46
1/4
1
2
231988-001
Plt, Side, Perf, Ss
2
3
231989-001
Plt, Side, Wheel, Perf, Ss
2
4
231990-100
Bkt, Mtg, Perf, Ss
1
5
231990-101
Bkt, Mtg, Perf Opposite Shown, Ss
1
6
231991
Bar, Mtg, Perf
1
7
231992-001
Blk, Adj, Perf, Ss
1
8
192332-003
Shaft, 3/8, Tapped, 10-32, Ss,
1.250 Lg
2
9
145614-018
Shaft, 0.250, Ss, Tapped, 1.250 Lg
1
10
145614-019
Shaft, 0.250, Ss, Tapped, 0.531 Lg
2
11
236598
Perforator Wheel W/rubber
1
12
236597-001
Spacer, Perf, Ss
1
13
823251
Cyl, Air, 3/4 Bore, 1 Stroke, Rev,
Sngl Acting
1
14
801762
Clvs, Rod 1/4-28
1
15
808985
Hdl, Adj, Ss, 3.15 Lg 3/8-16 X 1.57
Stud
1
16
800376
Bush, Oilite, 0.3750 X 0.5030 X 1/4
Lg
2
17
832252
Bush, Oilite, 0.2505 X 0.3770 X 7/
16 Lg
2
18
800444
Wshr, Oilite, 0.390 X 0.750 X 1/32
Thk
1
19
231994-001
Plt, Pressure, Adj, Ss
1
20
815731
Valve, Solenoid, 24v Dc 1/99 Rev.
Ed S.
1
21
810410
Regulator, Pressure, 1/4, 5-100 Psi
1
22
810411
Gauge, Pressure, 1-1/2 Dia.,
1
23
814797
Coiled Air Hose
1
Table 11-59: Easy Open Perforator Wheel Assembly
11.61 Easy Open Perforator Wheel Assembly (Option) (194184)
11-119
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.62 Extension Assembly (Option) (214810)
2
3
4
1
Figure 11-57. Extension Assembly
Fig ref.
Part number
Description
1
214804
Bkt, Extension, Dschg, Lh
1
2
214804.001
Bkt, Extension, Dschg, Rh
1
3
202400
Shaft, 1/4, 11 1/4 Lg
6
4
202401
Rlr, Idl, 1/2 Od
5
Table 11-60: Extension Assembly
11-120
11.62 Extension Assembly (Option) (214810)
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.63 Photo Eye Assembly (Option)(215353)
3,4
1
2
Figure 11-58. Photo Eye Assembly
Fig ref.
Part number
Description
Qty
1
191341
Bracket, Eye, Horizontal
1
2
191342
Shaft, Mounting, Eye, Horizontal
1
3
191343
Block, Adjustment, Eye
1
4
802676
Holder, Adjustable
1
Table 11-61: Photo Eye Assembly
11.63 Photo Eye Assembly (Option)(215353)
11-121
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.64 Film Sensor Assembly (Option) (232062)
4
1
2
6
7
3
8
5
Figure 11-59. Film Sensor Assembly
Fig ref.
Part number
Description
1
194062
Shaft, Adj, Eye
1
2
232059-xxx
Bkt, Mtg, Arm, Sensor
1
3
232061
Blk, Adj, Rod, Sensor
1
4
232247
Bkt, Mtg, Eye
1
5
808028
Hdl, Adj, 3/8-16 x .78 Th’d
1
6
819290
Hdl, Adj, 1/4-20 x .59 Th’d
1
7
194077
Insert, Th’d, Brass
1
8
232060
Arm, Sensor
1
Table 11-62: Film Sensor Assembly
11-122
11.64 Film Sensor Assembly (Option) (232062)
Qty
TS37 Shrink Wrapper Installation, Operation & Service Manual
Page Intentionally Blank
11.64 Film Sensor Assembly (Option) (232062)
11-123
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.65 230V Electrical Assembly (Option) (123456502B)
3
1
2
4
Figure 11-60. 230V Electrical Assembly
11-124
11.65 230V Electrical Assembly (Option) (123456-502B)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
1
804000-363
Circuit Breaker, 3p 30a 480v H-
Qty
1
frame Trip(Thm/mag)=nomin/
0500a Ir=25ka
2
804000-296
Circuit Breaker, Rotary Oper Mech-
1
anism, H-frame Blk Handle 12"
Depth Max Nema4x
3
804000-315
Circuit Breaker, 2p 20a 277v
Trip=10-20 Ir=10ka Ul489
1
4
804024-003
Transformer, 1ph 2.0kva
240/480|120/240 Nema3r Encapsulated
1
Table 11-63: 230V Electrical Subassembly
11.65 230V Electrical Assembly (Option) (123456-502B)
11-125
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.66 460V Electrical Assembly (Option)(194199000D)
3
1
2
4
Figure 11-61. 460V Electrical Assembly
11-126
11.66 460V Electrical Assembly (Option)(194199-000D)
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
1
804000-385
Circuit Breaker, 3p 15a 480v H-
Qty
1
frame Trip(Thm/mag)=nomin/
0500a Ir=18ka
2
804000-296
Circuit Breaker, Rotary Oper Mech-
1
anism, H-frame Blk Handle 12"
Depth Max Nema4x
3
804000-313
Circuit Breaker, 2p 10a 277v
Trip=10-20 Ir=10ka Ul489
1
4
804024-003
Transformer, 1ph 2.0kva
240/480|120/240 Nema3r Encapsulated
1
Table 11-64: 460V Electrical Subassembly
11.66 460V Electrical Assembly (Option)(194199-000D)
11-127
TS37 Shrink Wrapper Installation, Operation & Service Manual
11.67 120” Servo Lug Infeed Electrical Assembly
(Option)
1
23
3
5
4
2
6
22
9
12
16
17
11
18
19
Figure 11-62. Lug Infeed Electrical Assembly
11-128
11.67 120” Servo Lug Infeed Electrical Assembly (Option)
8
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
1
804000-315
Circuit Breaker, 2p 20a 277v
2
804020-004
Qty
1
Trip=10-20 Ir=10ka Ul489
Suppressor, Surge Ac (R-c-v) 600
1
Vac 3 Phase
3
804012-185
Drive, Servo, Control & Amp 6.0a
1
230v 6a 230vac (See 804012.279
For
4
804012-188
Drive, Servo, Connector Kit For
Feedback 26 Pin For Gemini Servo
Drive
1
5
804012-189
Drive, Servo, Connector 50 Pin To
Flying Leads Connect Extern. Divice To
1
6
804003-109
Cable, 14awg 4-wire Straight Over-
10
all Shield (For Servo Motor)
7
804006-122
Cable, P Clamp Metallic 0.5 Inch
4
Id.Made By Keysotne
8
804013-009
Encoder, Optical,1024 Pulses Per
1
Rev 5 Vdc, P/out 3/8 In Shaft With
Flat
9
804003-121
Cable, 22awg 10-wire Straight
20
10
804995-077
Overall Shield (For Encoder)
Switch
1
11
804007-115
Photo Sensor, Background Dc Npn/
1
pnp Range=2m W/2m-cbl Nema1
12
804007-032
13
804007-040
Photo Sensor, Retro-fiber Dc Npn/
1
pnp Qd Infra-red
Photo Sensor, Fiber-optic-cable
2
60in Ss Straight Straight-tip
Threaded
14
804003-135
Cable, Sensor Qd, 16ft Straight
1
15
804010-035
Micro 4-pin Black Pvc
Connector, 4p,female,straight
2
16
804007-149
Photo Sensor, Registration Slot
Sensor
1
Table 11-65: 460V Electrical Assembly
11.67 120” Servo Lug Infeed Electrical Assembly (Option)
11-129
TS37 Shrink Wrapper Installation, Operation & Service Manual
Fig ref.
Part number
Description
17
804010-188
Connector, Insert, 16p Male 14-
Qty
1
20awg 16a 600v Screw #01-#16
(Hbe Series)
18
804010-189
Connector, Insert, 16p Male 14-
1
20awg 16a 600v Screw #17-#32
(Hbe Series)
19
804010-190
Connector, Hood, Size 32
Top-entry 1" Npt For Double Latch
(Hbe
2
20
804010-193
Connector, Insert, 6p Male 10-
1
20awg 16a 600v Screw #01-#06
(Hbs Series)
21
804010-194
Connector, Insert, 6p Male 10-
1
20awg 16a 600v Screw #07-#12
(Hbs Series)
22
804014-183
Enclosure, 20x 16x 12 Nema12 1dr
Wall-mounted
1
23
804014-133
Enclosure, 20x 16 Subpanel
17.00x13.00
1
Table 11-65: 460V Electrical Assembly
11-130
11.67 120” Servo Lug Infeed Electrical Assembly (Option)