Fiber Cement Panel Trim (5/16

Transcription

Fiber Cement Panel Trim (5/16
Fiber Cement Panel Trim (5/16")
"F" MOLDING
J-CHANNEL
VERTICAL
MOLDING
VERTICAL
RETAINER
VERTICAL
INSERT
VERTICAL
OFFSET
HORIZONTAL
DOUBLE
HORIZONTAL
DRIP CAP /
DRIP CAP 875
INSIDE CORNER
INTEGRAL
INSIDE CORNER
OUTSIDE CORNER
BULLNOSE
OUTSIDE CORNER
INTEGRAL
OUTSIDE CORNER
OUTSIDE CORNER
TRANSITION
BASE
INSIDE CORNER
TRANSITION
While the exterior of a building has a functional purpose in providing a basic enclosure, it is also a way to differentiate through superior
design. Fry Reglet Fiber Cement Panel Trims can assist the designer and builder with creating both a high performance exterior as well as
interesting design components by offering the following benefits:
•Aesthetics
An interesting design brings value by piquing the interest of investors and prospective tenants. Add interest to your design by incorporating reveals and intersections with the clean look of extruded aluminum. Usage of more than one material is easy with Fry Reglet
Fiber Cement Panel trims that transition seamlessly from panel to lap siding. Fry Reglet Trims can also be painted in a variety of colors,
either at the factory or in the field, to match your design.
•
Ease of Installation
Installation can actually be made easier by adding trims to your design, as mitered corners are eliminated. Cut edges can be slid easily
into trims for a clean, seamless installation.
•
Sturdy extruded aluminum construction
Fry Reglet trims are extruded from 6063 T5 aluminum to ensure solid construction that can withstand the rigors of outdoor conditions in
any climate.
•
Environmentally sound
Aluminum is the most abundant metal found in nature, and 75% is still in use! 60% of the aluminum used in Fry Reglet Fiber Cement
Panel trims consists of recycled content.
•
Where should you use trims
o
Over a window or door
o
At the base of a building
o
On all corners for material protection
o
Between each panel for easy installation of material
o
When transitioning between panel and lap siding
o
Anywhere an interesting visual element or reveal is desired
Fry Reglet Corporation, 1-800-237-9773, www.fryreglet.com
- 109 -
Design Guide Edition 17
F MOLDING
PRODUCT DETAIL :
F MOLDING SIZES
usage
Fry Reglet F Molding creates an attractive architectural reveal where
Fiber Cement Panels terminate against sills, jambs and soffits.
DIM. A
guide specification
Where indicated on drawings, Fry Reglet FCP F Molding, as
manufactured by Fry Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, clear anodized or primed finish,
unless otherwise specified.
3/8"
DIM. B
INSTALLATION DETAIL : Cross Section
dim. a
dim. b
number
NOM. 1 /2"
NOM. 3 /8"
FCP - F MOLDING
INSTALLATION DETAIL : ISO View
Wall Sheathing
Metal or Wood
Framing
Soffit
F Molding
Metal or Wood
Framing
5/16 fiber cement panel
F Molding
Water Resistant Barrier
Water Resistant Barrier
5/16" Fiber Cement Panel
Wall Sheathing
J-CHANNEL TRIM
PRODUCT DETAIL :
J-CHANNEL SIZES
usage
Fry Reglet J-Channel is a termination trim designed to cover the
edge of Fiber Cement Panels at intersections and at door & window
openings.
1 1/8 "
guide specification
dim. a
number
NOM. 3 /8"
FCP - J CHANNEL
Where indicated on drawings, Fry Reglet J-Channel, as manufactured
by Fry Reglet Corporation, shall be installed. Aluminum shall be
extruded alloy 6063 T5, clear anodized or primed finish, unless
otherwise specified.
NOTE: D
o not use J-Channel Trim horizontally with short leg up.
DIM. A
3 /8
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Metal or Wood
Framing
Wall Sheathing
Metal or Wood
Framing
Wall Sheathing
Caulk
Junction
Water Resistant Barrier
5/16" Fiber Cement Panel
J-Channel
Water Resistant Barrier
Caulk Junction
5/16" Fiber Cement Panel
J-Channel
Foam Backing Rod
VERTICAL MOLDING TRIM
PRODUCT DETAIL :
VERTICAL MOLDING SIZES
usage
Fry Reglet Vertical Molding creates an attractive architectural
vertical reveal between Fiber Cement Panels. The reveal
becomes a design element to enhance building exteriors.
2 11 /16"
guide specification
DIM. A
3 /8"
1 /2"
Where indicated on drawings, Fry Reglet Vertical Molding, as
manufactured by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, clear anodized or
primed finish, unless otherwise specified.
NOTE: Do not use Vertical Molding at horizontal joints.
3 /8"
INSTALLATION DETAIL : Cross Section
dim.a
number
NOM. 3 /8"
FCP - VERTICAL
INSTALLATION DETAIL : ISO View
Wall Sheathing
Metal or Wood
Framing
Metal or Wood
Framing
Water Resistant Barrier
Wall Sheathing
Water Resistant Barrier
Vertical Molding
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Vertical Molding
5/16" Fiber Cement Panel
VERTICAL RETAINER
PRODUCT DETAIL :
2 3 /4"
VERTICAL RETAINER SIZES
usage
Fry Reglet Vertical Retainer acts as the receiver for Vertical Insert
and Vertical Offset trims. This allows for easy installation of the
panels and less chance of material damage.
guide specification
DIM. A
Where indicated on drawings, Fry Reglet Vertical Retainer, as
manufactured by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, clear anodized or
primed finish, unless otherwise specified.
NOTE: Do not use Vertical Retainer at horizontal joints.
INSTALLATION DETAIL : Cross Section
dim.a
number
NOM. 3 /8"
FCP - VERT RET
INSTALLATION DETAIL : ISO View
Wall Sheathing
Metal or Wood
Framing
Metal or Wood
Framing
Wall Sheathing
Water Resistant
Barrier
Water Resistant Barrier
Vertical Retainer
5/16" Fiber Cement Panel
Vertical Retainer
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
VERTICAL INSERT
PRODUCT DETAIL :
VERTICAL INSERT SIZES
usage
Fry Reglet Vertical Insert creates an attractive architectural reveal
when used in conjunction with the Fry Reglet Vertical Retainer.
DIM.A
guide specification
1 /2"
1 /2"
1 /2"
dim.a
number
NOM. 3 /8"
FCP - VERT INSERT
Where indicated on drawings, Fry Reglet Vertical Insert, as
manufactured by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, clear anodized or
primed finish, unless otherwise specified.
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Wall Sheathing
Metal or Wood
Framing
Metal or Wood
Framing
Fry Reglet
Vertical Retainer
Wall Sheathing
Water Resistant Barrier
Water Resistant Barrier
Vertical Insert
Fry Reglet
Vertical Retainer
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Vertical Insert
5/16" Fiber Cement Panel
VERTICAL OFFSET
PRODUCT DETAIL :
VERTICAL OFFSET SIZES
usage
Fry Reglet Vertical Offset fits into the Vertical Retainer trim
and covers the vertical edges of panels. This is ideal for
usage at the transition from a single layer of panels to lap
siding configuration.
D IM .B
DIM.A
1 /2"
1 /2"
1 /2"
guide specification
dim.a
dim.b
number
NOM. 3 /4" NOM. 3 /8"
FCP - VERT OFFSET
Where indicated on drawings, Fry Reglet Vertical Offset, as
manufactured by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, clear anodized
or primed finish, unless otherwise specified.
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Wall Sheathing
Wall Sheathing
Metal or Wood
Framing
Water Resistant Barrier
Fry Reglet
Vertical Retainer
Metal or Wood
Framing
Water Resistant
Barrier
Fry Reglet
Vertical Retainer
Vertical Offset
5/16" Fiber Cement Panel
Lap siding
Vertical Offset
5/16" Fiber Cement Panel
Lap Siding
5/16" Fiber Cement Panel
BASE TRIM
PRODUCT DETAIL :
BASE TRIM SIZES
usage
Fry Reglet Base Trim creates a continuous horizontal ledge at the
bottom of the Fiber Cement Panels, covers the horizontal edges at
the bottom of panel and is angled to allow for runoff.
2"
DIM.A
guide specification
length
number
NOM. 3 /8"
FCP - BASE
Where indicated on drawings, Fry Reglet Base Trim, as manufactured
by Fry Reglet Corporation, shall be installed. Aluminum shall be
extruded alloy 6063 T5, clear anodized or primed finish, unless
otherwise specified.
7o
1 /2"
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Wall Sheathing
Water Resistant Barrier
Water Resistant Barrier
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Metal or Wood
Framing
Metal or Wood
Framing
1/2" Reveal
1/2"
Wall Sheathing
Base Trim
Base Trim
HORIZONTAL TRIM
PRODUCT DETAIL :
HORIZONTAL TRIM SIZES
usage
Fry Reglet Horizontal Trim creates an attractive reveal between horizontal
ends of Fiber Cement Panels. The profile shape channels moisture out and
away from sheathing and water resistant barrier.
1
guide specification
7 /8"
3 /8"
Where indicated on drawings, Fry Reglet Horizontal Trim, as manufactured
by Fry Reglet Corporation, shall be installed. Aluminum shall be extruded
alloy 6063 T5, clear anodized or primed finish, unless otherwise specified.
dim. a
number
NOM. 1/2"
FCP - HORIZONTAL
DIM.A
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Wall Sheathing
Flashing Tape
Metal or Wood
Framing
5/16" Fiber Cement Panel
Metal or Wood
Framing
1/2"
Water Resistant Barrier
1/2" Reveal
Horizontal Trim
5/16" Fiber Cement Panel
Water Resistant Barrier
Flashing Tape
Wall Sheathing
Horizontal Trim
5/16" Fiber Cement Panel
DOUBLE HORIZONTAL TRIM
PRODUCT DETAIL :
DOUBLE HORIZONTAL TRIM SIZES
usage
Fry Reglet Double Horizontal Trim creates a unique aesthetic, with a
double reveal.
guide specification
2
3 /8"
Where indicated on drawings, Fry Reglet Double Horizontal Trim, as
manufactured by Fry Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, clear anodized or primed finish, unless
otherwise specified.
3 /8"
3 /8"
dim. a
number
NOM. 1/2"
FCP - DBLHOZ
DIM.A
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Wall Sheathing
Flashing Tape
Metal or Wood
Framing
Metal or Wood
Framing
1/2"
5/16" Fiber Cement Panel
Water Resistant Barrier
Wall Sheathing
Water Resistant Barrier
Double Horizontal
Trim
5/16" Fiber Cement Panel
1/2" Reveal
Flashing Tape
Horizontal Trim
5/16" Fiber Cement Panel
DRIP CAP/ DRIP CAP 875
PRODUCT DETAIL :
DRIP CAP SIZES
usage
Fry Reglet Drip Caps create an attractive architectural reveal between
horizontal ends of Fiber Cement Panels and the tops of doors and
windows. Available in 1 1/2" and 7/8" horizontal dimensions. The profile
shape channels moisture out and away from sheathing and water resistant
barrier.
1 3 /4"
3 /8"
DIM.A
guide specification
Where indicated on drawings, Fry Reglet Drip Cap, as manufactured by
Fry Reglet Corporation, shall be installed. Aluminum shall be extruded
alloy 6063 T5, clear anodized or primed finish, unless otherwise specified.
INSTALLATION DETAIL : Cross Section
Wall Sheathing
dim. a
1 1 /2"
number
FCP - DRIP CAP
7 /8"
FCP - .875
NOTE: DRIP CAP SUPPLIED IN 12' LENGTHS
INSTALLATION DETAIL : ISO View
Water Resistant Barrier
Water Resistant Barrier
Wall Sheathing
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Flashing Tape
1/2"
Drip Cap
Metal or Wood
Bottom Plate
1/2"
Drip Cap
INSIDE CORNER TRIM
PRODUCT DETAIL :
INSIDE CORNER SIZES
usage
7 /8 "
Fry Reglet Inside Corner creates a square and true termination point
for Fiber Cement Panels at an Inside Corner, with minimal extrusion
shown for a clean aesthetic. The trim eliminates the need for the panel
to be miter cut, while also mitigating the possibility of panel bow.
DIM. A
dim. a
dim. b
number
NOM. 1 /2"
NOM. 1 /2"
FCP - INSIDE CNR
guide specification
7 /8"
DIM. B
Where indicated on drawings, Fry Reglet Inside Corner, as
manufactured by Fry Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, clear anodized or primed finish,
unless otherwise specified.
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Metal or Wood
Framing
Metal or Wood
Framing
Wall Sheathing
Water Resistant Barrier
Inside Corner
Inside Corner
5/16" Fiber Cement Panel
Water Resistant Barrier
5/16" Fiber Cement Panel
Wall Sheathing
5/16" Fiber Cement Panel
INTEGRAL INSIDE CORNER TRIM
PRODUCT DETAIL :
1
1 /2 "
D IM. A
1 1 /2"
1 /2 "
1 /2 "
D IM. B
usage
INTEGRAL INSIDE CORNER SIZES
Fry Reglet Integral Inside Corner creates a traditional corner shape for
Fiber Cement Panels, the trim design eliminates the need to miter cut
the panels, while also mitigating the possibility of panel bow.
dim. a
dim. b
number
NOM. 3 /8"
NOM. 3 /8"
FCP - INT IS CNR
guide specification
Where indicated on drawings, Fry Reglet Integral Inside Corner, as
manufactured by Fry Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, clear anodized or primed finish,
unless otherwise specified.
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Metal or Wood
Framing
5/16" Fiber Cement Panel
Integral Inside Corner
Water Resistive Barrier
Wall Sheathing
Water Resistive Barrier
Wall Sheathing
Metal or Wood
Framing
Integral Inside Corner
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
INSIDE CORNER TRANSITION TRIM
PRODUCT DETAIL :
INSIDE CNR TRANSITION SIZES
usage
Fry Reglet Inside Corner Transition creates a traditional corner shape
and provides a seamless transition between lap and panel siding.
"
2
guide specification
3 /4 "
"
2
3 /8 "
Where indicated on drawings, Fry Reglet Inside Corner Transition, as
manufactured by Fry Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, clear anodized or primed finish,
unless otherwise specified.
dim. a
number
NOM. 3 /8"
FCP - ISCNRTR
DIM. A
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Metal or Wood Stud
Framing
Water Resistive Barrier
Wall Sheathing
Water Resistive Barrier
5/16" Fiber Cement Panel
Inside Corner
Transition
Inside Corner
Transition
5/16" Fiber Cement Panel
Wall Sheathing
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Lap Siding
OUTSIDE CORNER TRIM
PRODUCT DETAIL :
Fry Reglet Outside Corner creates a straight and true, abuse resistant
corner, with flanges that cover the vertical end of the Fiber Cement
Panel. An interesting aesthetic detail is created by the shape.
DIM. A
1 1/2
OUTSIDE CORNER SIZES
usage
"
guide specification
3 /8 "
DIM. A
3 /8 "
1 1/2 "
Where indicated on drawings, Fry Reglet Outside Corner, as
manufactured by Fry Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, clear anodized or primed finish,
unless otherwise specified.
INSTALLATION DETAIL : Cross Section
dim. a
number
NOM. 3 /8"
FCP - OUTSIDE CNR
INSTALLATION DETAIL : ISO View
Metal or Wood
Framing
Wall Sheathing
Water Resistant Barrier
Metal or Wood
Framing
Wall Sheathing
Water Resistant Barrier
Outside Corner
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Outside Corner
5/16" Fiber Cement Panel
BULLNOSE OUTSIDE CORNER TRIM
DIM. A
PRODUCT DETAIL :
usage
2 3 /4"
Fry Reglet Bullnose Outside Corner creates a straight and true, abuse
resistant rounded corner with exposed flanges that cover the vertical
ends of the Fiber Cement Panel. The shape eliminates the need
for panels to be miter cut, while also mitigating the possibility
of panel bow.
BULLNOSE OUTSIDE CORNER
SIZES
dim.a
number
NOM. 3 /8"
FCP - BULLNOSE
guide specification
Where indicated on drawings, Fry Reglet Bullnose Outside Corner
as manufactured by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, clear anodized or
primed finish, unless otherwise specified.
DIM. A
2 3 /4 "
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Wall Sheathing
Metal or Wood
Framing
Metal or Wood
Framing
Wall Sheathing
Water Resistant Barrier
Bullnose Corner Trim
Water Resistant Barrier
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Bullnose Outside Corner
INTEGRAL OUTSIDE CORNER TRIM
PRODUCT DETAIL :
usage
DIM. A
Fry Reglet Integral Outside Corner creates a traditional corner shape
for Fiber Cement Panels. The trim design eliminates the need to miter
cut the panels, while also mitigating the possibility of panel bow.
INTEGRAL OUTSIDE CORNER
SIZES
guide specification
1 3 /4"
3 /4 "
DIM. A
Where indicated on drawings, Fry Reglet Integral Outside Corner
as manufactured by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, clear anodized or
primed finish, unless otherwise specified.
dim.a
number
NOM. 3 /8"
FCP - INTOSCNR
3 /4 "
1 3 /4"
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Water Resistive Barrier
Wall Sheathing
Metal or Wood
Framing
Wall Sheathing
Metal or Wood
Framing
Water Resistive Barrier
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Integral Outside
Corner
Integral Outside
Corner
OUTSIDE CORNER TRANSITION TRIM
PRODUCT DETAIL :
usage
Fry Reglet Outside Corner Transition creates a straight and true corner
while providing a seamless transition between lap and panel siding.
DIM. A
2"
OUTSIDE CORNER TRANSITION
SIZES
guide specification
3 /8"
Where indicated on drawings, Fry Reglet Outside Corner Transition
as manufactured by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, clear anodized or
primed finish, unless otherwise specified.
3 /4"
dim.a
number
NOM. 3 /8"
FCP - OSCNRTR
3 /8"
7 /16"
2"
INSTALLATION DETAIL : Cross Section
INSTALLATION DETAIL : ISO View
Water Resistive Barrier
Metal or Wood
Framing
Wall Sheathing
Metal or Wood
Framing
Wall Sheathing
5/16" Fiber Cement
Panel
Water Resistive Barrier
Outside Corner
Transition
5/16" Fiber Cement Panel
Outside Corner
Transition
5/16" Fiber Cement Panel
Lap Siding
TYPICAL INTERSECTIONS
CORNERS
FCP - J Channel
FCP - J Channel
FCP - J Channel
FCP - J Channel
FCP - Inside Corner
FCP - Outside Corner
FCP - Horizontal
FCP - Horizontal
FCP - Horizontal
FCP - Inside Corner
3-WAY
FCP - Horizontal
FCP - Outside Corner
FCP - Vertical
FCP - J Channel
FCP - J Channel
Factory Fabricated Intersections are
available to connect horizontal and vertical
joints of trims of the same or different
types. Intersections are available in "T", "L",
and "+" shapes.
The mitered joints are welded, and the 6"
legs are measured from center point of the
intersection.
FCP - Horizontal
FCP - J Channel
FCP - Drip Cap
Corner pieces can be manufactured
for both inside and outside conditions.
Custom leg lengths are available.
FCP - Vertical
4-WAY
FCP - Horizontal
FCP - Horizontal
FCP - Vertical
FCP - Horizontal
FCP - Horizontal
FCP - Vertical
All intersections are factory fabricated
ensuring precision joinery and consistent
quality.
LAPSIDING
X CORNER MOLDING
3 /8 "
3 /4 "
Fry Reglet X Corner creates a stepped edge at the right angle
corner where lap siding meets.
3 /4 "
3 /8"
INSTALLATION DETAIL : ISO View
usage
PXM-75-75 X CORNER SIZES
DIM. A
DIM. B
dim.a
dim.b
number
NOM. 3 /4"
NOM. 7 /8"
PXM-75-75
Metal or Wood
Stud Framing
Wall Sheathing
Water Resistive
Barrier
Lapsiding Panels
X Corner Trim
W REVEAL MOLDING
INSTALLATION DETAIL : ISO View
usage
5 /8 "
Fry Reglet W Trim provides a crisp reveal for Fiber Cement Panel
when installed in a lap style application.
3 /4"
Wall Sheathing
Water Resistive
Barrier
WRM-75-75 W TRIM SIZES
DIM. A
Metal or Wood
Stud Framing
dim.a
dim.b
number
NOM. 3 /4"
NOM. 3 /4"
WRM-75-75
Lapsiding Panels
DIM. B
W Reveal Trim
J ACOUSTICAL TRIM
1 1 /4"
7 /8 "
INSTALLATION DETAIL : ISO View
Metal or Wood
Stud Framing
usage
Fry Reglet J Trim provides a clean termination for Fiber Cement
Panel when installed in a lap style application, at intersections and
at door & window openings.
Wall Sheathing
JAM-875 J TRIM SIZES
1 /2 "
"j"
depth
NOM. 7 /8"
number
INSTALLATION DETAIL : ISO View
Metal or Wood
Stud Framing
usage
Fry Reglet F Reveal provides a crisp reveal for Fiber Cement Panels
when installed in a lap style application.
15 /16"
3 /4 "
7 /8 "
1 /2 "
Water Resistive
Barrier
JAM-875
F ACOUSTICAL REVEAL
2 1 /4 "
J Trim
Lapsiding Panels
Wall Sheathing
FARM-875-75 F TRIM SIZES
reveal width
number
NOM. 3 /4"
FARM-875-75
F Reveal Trim
Lapsiding Panels
Water Resistive
Barrier

Similar documents