Lyte Ladders Catalogue

Transcription

Product Catalogue
TRADE LADDERS / STEP LADDERS
DOMESTIC LADDERS / STEP LADDERS
GLASS FIBRE PRODUCTS
LOFT LADDERS
MOBILE & INDUSTRIAL TOWER SYSTEMS
INDUSTRIAL LADDERS / STEP LADDERS
‘C’ SECTION LADDERS / SURVEYORS LADDERS
ROOF LADDERS & EXTENSIONS
WAREHOUSE STEPS
SPECIALS
www.lyteladders.co.uk
Company History
Product Index
Which product should I buy
and is it strong enough?
British and European Standards apply to most ladders &
stepladders, so make sure you choose the right kind of
ladder for the job:
Class 3 (Domestic) BS2037
This Standard applies to products being used in and around the
home; these products are designed for infrequent use
● Duty Rating 95Kg = Max permissible load 125Kg
Previous Class 2 (Trade) BSEN131
This is the European Standard, which covers the products being
used in a trade environment; these products are designed for
regular light trade work.
● Max permissible load 150Kg
Lyte Ladders & Towers is one of the leading manufacturers of
aluminium and glass-fibre ladders/stepladders and towers in the UK.
Established in South Wales in 1947, the comprehensive portfolio of
access equipment is renowned for its quality of design and
manufacture.
● Products are manufactured at Lyte’s 200,000sq ft site
● Probably the largest portfolio of Trade and Industrial products in
the UK
● Certified to the relevant standards
(BS2037 Class 1 & 3, BSEN131 and ANSI 14.5)
Class 1 (Industrial) BS2037
This Standard applies to products being used in an industrial
environment; these are high quality products, designed for heavy
and regular loading.
● Duty Rating 130Kg = Max permissible load 175Kg
Certified to BS 7553: 1992 Class G
(General use) Loft ladder Classification
● Duty Rating 100Kg
● Lyte’s products are supplied to leading organisations throughout the
UK including BT, Sky, HSS Hire and Screwfix.
● Highly trained and friendly in-house telesales and area
representatives
● 60,000 sq ft Distribution Centre and increased number of distribution
vehicles
● Some of our more specialist products have been supplied to a
number of Britain’s Fire Brigades as well as the Green Goddesses
during their call to action.
● Lyte have achieved ISO9001:200 & OHSAS 18001
● All Hailo products are distributed through Lyte Ladders & Towers
throughout the UK and Ireland
Lyte Industries (Wales) Ltd.
Wind Road, Ystradgynlais, Swansea, Powys, UK SA9 1AF
Tel: 01639 846800 Fax: 01639 841541 email: [email protected]
2
Order Now! Call: 01639 846800
3
Index
Domestic Ladders
Page
4
BD - DIY Quality 2 and 3 Section
Domestic Ladders
● Domestic Extension Ladders
5
● Trade Extension Ladders
6
● General Duty Extension Ladders
7
● Heavy Duty Extension Ladders
8
● Triple Ext. Push-up Ladder
9
● Comprehensive variety of sizes
● C Section Ladder
10
● Glass Fibre Push-up Ladder
11
● Extruded hooks and guides provide
extra safety
● Trade Roof Ladders
12
● Industrial Roof Ladders
13
● Hailo Gangway Step Ladders
14
● Hailo Household ProfiStep®
15
● Lightweight StepLadders
16
● Trade Step Ladders
17 - 18
● Glassfibre Trade Step Ladders
19
● Widestep Step Ladders
20
● Industrial Step Ladders
21 - 22
● Glassfibre Industrial Step Ladders
23
● Ladda Steps
24
● Multi Purpose Ladders
25
● Telescopic Ladder System
26
● Combination Ladders
27
● Professional Combi Ladder
28 - 29
● Multi-purpose Platforms
30
● Specialist Ladders
31 - 33
● Loft Ladders
34
● Accessories
35 - 36
● Trestles & Staging Boards
37
● Podium Steps
38
● Low Level Work Platform
39
● Roof Buddy
40 - 41
● LIFT System
42 - 43
● Helix Industrial Tower System
44 - 46
● HiLyte Industrial Tower System
47 - 49
● PASMA Tower Training Course
50
● Ladder Association Training Course
51
● Using Ladders - Top Tips
52
● Conditions of Sale
53
● Credit Account Application
55
● Large “D” shaped rung
● Rigid wide, box section stiles
● Red, non- slip feet riveted in place
● Certified to BS 2037 Class 3
Doubles Rungs Closed
Code
Height
BD225
7
2.2m
BD230
9
2.7m
BD235
11
3.3m
BD240
13
3.8m
BD245
15
4.4m
Open
Height
3.7m
4.7m
5.9m
6.9m
8.1m
Triples
Code
BD325
BD330
BD335
Open Weight
Height
5.2m 8.50kg
6.7m 14.50kg
8.5m 19.00kg
Rungs Closed
Height
7
2.2m
9
2.7m
11
3.3m
Weight
6.50kg
8.00kg
11.00kg
14.50kg
16.00kg
5
Trade Ladders
General Duty Ladders
ELT - Trade Ladders
Two Section Push-up
● Certified to BSEN131
Code
● Ideal for all types of trade work
● Large comfortable ‘D’ Shaped rungs
● Rigid extruded box section stiles for
added strength
● Secure non-slip grip with all round PVC
moulded feet
● Comprehensive range of sizes available
ELT225
ELT230
ELT235
ELT240
ELT245
ELT250
ELT255
Closed
Height
2.42m
2.92m
3.42m
4.04m
4.42m
4.92m
5.42m
Ext.
Height
3.82m
4.88m
5.94m
7.03m
7.81m
8.83m
9.90m
Weight Rungs
9.00kg
10.50kg
14.00kg
16.00kg
20.50kg
23.50kg
29.00kg
8
10
12
14
15
17
19
GD - General Duty
Extension Ladders
GS - Single Section
General Duty Ladders
● All three types are certified to BS2037
Class 1 1994
Code
● Available in single section or double and
triple push-ups
GS120
GS125
GS130
GS135
GS140
GS145
GS150
GS160
● Now fitted with the new comfortable Dshaped rung and solid moulded rubber feet
at both ends
● A cost effective alternative to the heavy
duty range, these ladders are easy to
handle yet incredibly rigid in relation to
weight
Three Section Push-up
Code
ELT325
ELT330
ELT335
ELT340
Closed
Height
2.42m
2.92m
3.42m
4.04m
Ext.
Height
5.22m
6.85m
8.46m
10.22m
Weight Rungs
16.50kg 8
18.50kg 10
25.50kg 12
28.50kg 14
NEW
comfortable
D-shaped rung
Closed
Height
1.93m
2.43m
2.93m
3.43m
3.93m
4.43m
4.93m
5.93m
Ext. Rungs Weight
Height
7
4.10kg
9
5.00kg
11 6.40kg
13 7.70kg
15 8.60kg
17 9.50kg
19 10.40kg
23 12.30kg
GD - Two Section Push-up
General Duty Extension Ladders
Code
GD225
GD230
GD235
GD240
GD245
GD250
Closed
Height
2.43m
2.93m
3.43m
3.93m
4.43m
4.93m
Ext. Rungs Weight
Height
4.20m
9 10.90kg
5.20m
11 12.70kg
6.20m
13 15.00kg
7.20m
15 23.10kg
8.20m
17 25.90kg
8.95m
19 28.60kg
GT - Three Section Push-up
General Duty Extension Ladders
Two Section Push-Up
Three Section Push-Up
6
Code
GT320
GT325
GT330
GT335
GT340
Closed
Height
1.93m
2.43m
2.93m
3.43m
3.93m
Ext. Rungs Weight
Height
4.46m
7 14.50kg
5.96m
9 16.80kg
7.46m
11 27.70kg
8.96m
13 33.60kg
10.46m 15 42.20kg
7
Heavy Duty Ladders
Triple Ext. Push-up Ladder
HD - Heavy Duty Industrial
Rope-Operated Ladder
HD - Two Section Heavy Duty
Rope-operated Extension Ladders
L5BEQ Aluminium Ladder
● Certified to BS2037 Class 1 1994
Kitemarked to BS2037 (Class1)
● These classic heavy-duty ladders are still
probably the strongest commercial ladders
available, and are ideal for all professional
tradesmen
Code
● Unique aluminium ‘butterfly’ rung provides
excellent balance and support at the top of
the ladder
● Wall-running wheels, interlocking stiles
and rope operation makes extension
smooth and provides extra strength
● Now fitted with the new comfortable
D-shaped rung and solid moulded rubber
feet at both ends
● Automatic gravity latch ensures fail-safe
locking
HD235
HD240
HD245
HD250
HD255
HD260
Closed
Height
3.37m
3.94m
4.44m
4.94m
5.44m
5.94m
Ext. Rungs Weight
Height
5.95m
13 20.00kg
7.21m
15 23.10kg
8.21m
17 26.80kg
8.96m
19 29.90kg
9.96m
21 37.20kg
10.71m 23 45.40kg
HD - Two Section Heavy Duty
Code
HD270
Closed
Height
6.94m
Ext. Rungs Weight
Height
12.71m 27 50.40kg
● Certified to BS2037 Class1
● Specifically designed for British Telecom
linesmen, this ladder is ideal for working on
telegraph poles and street lamps
● Fitted with a double safety catch and a
lashing rope to ensure safety when in use
● Nylon rollers fitted to the bases and middle
sections enable the operator to erect the
ladder with the minimum of effort.
Triple Extension Push-up Ladder
Code
L5BEQ
HT - Three Section Heavy Duty
Kitemarked to BS2037 (Class1)
Code
HT340
HT345
HT350
Closed
Height
3.94m
4.44m
4.94m
Closed
Height
2.5m
Open
Height
5.96m
Weight Rungs
18.50kg
8
Continuous
investment
in new product
development
ensures we
meet all
demands
of Health and
Safety
requirements
Ext. Rungs Weight
Height
10.47m 15 43.50kg
11.97m 17 52.60kg
12.97m 19 58.50kg
HT - Three Section Heavy Duty
Code
• This product now comes with D-shaped
rung in both the double and triple
extension ladders making it even more
comfortable for everyday use.
HT355
HT360
Closed
Height
5.44m
5.94m
Ext. Rungs Weight
Height
13.97m 21 64.90kg
15.47m 23 71.20kg
NEW
comfortable
D-shaped rung
8
9
C Section Ladder
‘C’ Section Ladder
● Heavy duty ‘C’ shaped stiles with non-slip
serrated round rungs
● Fully interlocking stiles for safety at
extended heights
● Sections can be separated to use
independently
● Can be converted to rope-operation
● Can be fitted with wall running wheels
Glass Fibre Push-up Ladder
‘C’ Section Single Ladder
L7EQ Glassfibre Push-Up Ladder
Code
● Certified to BSEN131 :1993
CS125
CS130
CS135
CS140
CS145
CS150
CS155
CS160
Closed
Height
2.38m
2.88m
3.38m
3.88m
4.38m
4.88m
5.38m
5.88m
Open
Height
-
Weight Rungs
● Part certified to ANSI A14.5 - 1982
6.00kg
7.30kg
8.60kg
9.50kg
11.30kg
12.30kg
13.60kg
15.00kg
9
11
13
15
17
19
21
23
CD220
CD225
CD230
CD235
CD240
CD245
CD250
CD255
CD260
Closed Open
Height Height
1.88m 3.21m
2.38m 4.21m
2.88m 5.21m
3.38m 6.21m
3.88m 7.21m
4.38m 8.21m
4.88m 9.21m
5.38m 9.96m
5.88m 10.96m
● Unique aluminium ‘butterfly’ rung provides
excellent balance and support at the top of
the ladder
● Fitted with a double safety catch and a
lashing rope to ensure safety when in use
● Nylon rollers fitted to the bases and middle
sections enable the operator to erect the
ladder with the minimum of effort
‘C’ Section Double Extension
Code
● Specifically designed for British Telecom
linesmen, this ladder is ideal to use in
environments where electrical hazards exist
Weight Rungs
9.50kg
12.30kg
15.00kg
17.20kg
20.00kg
22.20kg
25.40kg
28.10kg
30.40kg
7
9
11
13
15
17
19
21
23
Triple Extension Push-up Ladder
Code
L7EQ
Closed
Height
2.5m
Open
Height
6.0m
Weight Rungs
23.00kg
8
‘C’ Section Triple Extension
Code
CT320
CT325
CT330
CT335
CT340
CT345
CT350
10
Closed Open Weight Rungs
Height Height
1.88m 4.08m 14.50kg 7
2.38m 5.58m 18.10kg 9
2.88m 7.08m 22.20kg 11
3.38m 8.58m 26.30kg 13
3.88m 10.08m 29.90kg 15
4.38m 11.58m 33.60kg 17
4.88m 13.08m 37.70kg 19
11
Trade Roof Ladders
TRL - Trade Roof Ladders
Single Section
● Lightweight but combines the strength of a
trade ladder with a heavy duty ridge hook
Code
● Industrial non-slip rungs & box section
stiles
● Rubber covered bearer bars distributes
weight evenly preventing damage to roof
● Available in single and double sections
● Double sections fitted with safety catches
TRL130
TRL135
TRL140
TRL145
TRL150
TRL155
Closed
Length
-
Industrial Roof Ladders
RL - Industrial Roof Ladders
Overall Rungs Weight
Length
2.95m
11
8.50kg
3.45m
13 10.00kg
3.95m
15 11.00Kg
4.50m
17 11.50kg
4.97m
19 12.00kg
5.46m
21 13.50kg
● Manufactured with industrial strength
aluminium, with oval section stiles and
heavy duty non-slip rungs, incorporating a
heavy duty ridge hook
● Rubber covered bearers bars distributes
weight evenly to prevent damage to roof
surface
● This single section ladder can be extended
to a variety of lengths with the use of roof
ladder extension pieces
Two Section Extension
Code
TRL230
TRL235
TRL240
TRL245
Closed
Length
2.94m
3.44m
3.94m
4.30m
Overall
Length
4.64m
5.64m
6.64m
7.67m
Rungs Weight
Code
11+9
13+11
15+13
17+15
RL1
RL2
RL3
RL4
14.00kg
16.00kg
18.00kg
20.00kg
Overall
Length
3.37m
4.43m
4.94m
5.55m
Weight
Rungs
10.40kg
11.30kg
12.30kg
13.20kg
12
14
16
18
RLE - Industrial Roof Ladder
Extensions
● Made to the same specifications as the
Industrial Roof Ladders
● Supplied with stile spigots and drop nose
locking pins for a secure attachment
Code
RLE3
RLE4
RLE6
RLE12
Overall
Length
0.90m
1.20m
1.80m
3.60m
Weight
3.20kg
4.10kg
5.90kg
8.60kg
Extra
Rungs
3
4
6
12
A passion for quality combined
with an experienced, skilled
production team ensures Lyte
Industrial products maintains its
reputation for service excellence
12
13
Hailo Gangway Stepladders
®
Hailo ProfiStep
Economic Folding Step
ProfiStep® Gangway
Aluminium Ladder ProfiStep®
The ergonomic aluminium folding steps have
an extra high, curved safety grab rail and
extra deep platform. The ergonomically
shaped steel platform also has a non-slip
surface providing sufficient legroom and
stability.
● Aluminium platform with non slip ribbing
and hinge spreader
Silver Award winner, Hardware category Industry Awards 2007
● Can take loads up to 150kg
● Plastic rail with intergrated bucket hook
● Safe, high-tech riveted stile-step joins
● Slip resistant feet
● Wide aluminium steps with non-slip
surface
Extra high, curved, easygrip aluminium safety
grab rail to pull yourself up, for a secure grip
or simply to lean against
● 2 or 3 broad, extra deep (380 x 260 mm)
steel platforms (powdered silver) which
curve into each other.
● Steps with non-slip surface ensure
climbing up is safe
● Large PVC feet enhance stability and nonslip safety
Code: 8945
● Hinged lock (safety locking mechanism)
Code No. of Platform Achievable
Steps Height working
height
8943 3
62cm
2.37m
8944 4
84cm
2.59m
8945 5
106cm
2.81m
8946 6
128cm
3.03m
8947 7
150cm
3.25m
8948 8
172cm
3.46m
Weight
3.30kg
3.90kg
4.60kg
5.60kg
6.3kg
7.30kg
● Hailo hinge protection
● Intertek/GS safety tested
● Manufactured to EN14183
Code: 4392
● 10 year warranty
Code
4392
4393
No. of
Achievable
steps working height
2
226cm
3
250cm
Hailo Deluxe widestep step
ladder with extendable handrail
Weight
● Ideal for 3 points of contact when using a
step ladder
5.50kg
7.70kg
● 60% deeper treads
● Non slip and non marking feet
● Multifunction tray for paint tins and tools
● Bucket hook
● Folds away for easy storage
● Maximum load capacity 150kg
● 10 year guarantee
● EN131
Code Treads Platform Achievable
Height working
height
8853 3
62cm
237cm
8854 4
84cm
259cm
8855 5
106cm
281cm
8856 6
128cm
303cm
Weight
Code: 8854
4kg
4.8kg
5.8kg
6.6kg
Code: 4393
14
15
Lightweight StepLadders
Trade StepLadders
ENSP - Aluminium Step Ladder
BSBB / BSBP - Trade Stepladders
● Secure non-slip treads
● Certified to EN131 and BS2037 Class 1
● Secure platform safety catch
● Unique strengthening beam incorporated
into non-slip treads, rubber feet and
aluminium side arms prevents slips and
twists as there are no tapes to snap, or
flimsy arms to break
● Comfortable hand grip at top of platform
step,foam covered on treads 7 and above
● Suitable for domestic use
● Certified to EN131
● Rigid box section back legs with additional
cross braces and ‘k’ straps for increased
strength and stability
● Lightweight and easy to carry
Code
ENSP4
ENSP6
ENSP7
ENSP8
ENSP4
Platform
Height
870mm
1295mm
1510mm
1725mm
Weight
Rungs
3.95kg
6.10kg
6.70kg
7.40kg
4
6
7
8
● Plastic tool tray to hold tools and
equipment while working
BSBB Swingback Stepladder
Code
BSBB3
BSBB4
BSBB5
BSBB6
BSBB7
BSBB8
BSBB10
BSBB12
Open
Height
0.58m
0.81m
1.03m
1.26m
1.48m
1.70m
2.17m
2.57m
Closed Treads Weight
Height
0.66m
3
2.60kg
0.89m
4
3.30kg
1.14m
5
4.00kg
1.38m
6
4.70kg
1.62m
7
5.40kg
1.86m
8
6.10kg
2.34m
10 6.80kg
2.82m
12 7.50kg
BSBB6
A truely
reliable
lightweight
stepladder
BSBP Platform Stepladder
Code
Overall
Open
Height
BSBP3 1.24m
BSBP4 1.46m
BSBP5 1.68m
BSBP6 1.91m
BSBP7 2.13m
BSBP8 2.31m
BSBP10 2.74m
BSBP12 3.20m
Platform Closed Treads Weight
Height Height Inc
Platform
0.59m 1.35m 3 4.50kg
0.81m 1.59m 4 5.26kg
1.03m 1.83m 5 6.02kg
1.26m 2.07m 6 6.78kg
1.48m 2.31m 7 7.54kg
1.68m 2.55m 8 8.30kg
2.12m 3.01m 10 9.06kg
2.60m 3.52m 12 9.82kg
ENSP Large Step
BSBP6
16
17
Trade StepLadders
Glassfibre StepLadders
ESS / ESP - Trade Stepladders
GFBB / GFBP
Glassfibre Swingback & Platform
Stepladders
● ESS Certified to EN131 and BS2037 Class 1
● ESP range certified to BS2037 Class 1
into non-slip treads
● Non-conductive so is ideal to use where
electrical hazards exist
● Rubber feet and aluminium side arms
prevents slips and twists as there are no
tapes or flimsy arms to break
into non-slip treads, rubber feet and
aluminium side arms prevents slips and
twists as there are no tapes to snap, or
flimsy arms to break
● Ideal for light trade use
● Rigid box section back legs with additional
cross braces and ‘k’ straps for increased
strength and stability. Back legs are also
reinforced. This applies to 10 and 12 tread
stepladders ONLY.
ESS - Swingback Stepladders
Code
ESS3
ESS4
ESS5
ESS6
ESS7
ESS8
ESS10
ESS12
Open
Height
0.58m
0.81m
1.03m
1.26m
1.48m
1.70m
2.17m
2.57m
Height
0.66m
3
2.40kg
0.89m
4
2.50kg
1.14m
5
3.40kg
1.38m
6
4.50kg
1.62m
7
5.10kg
1.86m
8
6.00kg
2.34m
10 6.60kg
2.82m
12 7.30kg
● Plastic tool tray to hold tools and
equipment while working
GFBB6
GFBB - Glassfibre Swingback
Stepladders
Code
GFBB3
GFBB4
GFBB5
GFBB6
GFBB7
GFBB8
GFBB10
GFBB12
ESS8
ESP Platform Stepladder
Code
ESP3
ESP4
ESP5
ESP6
ESP7
ESP8
ESP10
ESP12
Overall
Open
Height
1.24m
1.46m
1.68m
1.91m
2.13m
2.31m
2.74m
3.20m
Height Height Inc
Platform
0.59m 1.35m 3 4.20kg
0.81m 1.59m 4 4.50kg
1.03m 1.83m 5 5.40kg
1.26m 2.07m 6 6.00kg
1.48m 2.31m 7 6.60kg
1.67m 2.55m 8 7.25kg
2.12m 3.01m 10 8.80kg
2.60m 3.52m 12 9.50kg
Open
Height
0.55m
0.77m
0.99m
1.22m
1.44m
1.70m
2.11m
2.54m
Height
0.59m
3
3.25kg
0.85m
4
4.25kg
1.1m
5
4.75kg
1.34m
6
5.50kg
1.58m
7
6.50kg
1.81m
8
7.50kg
2.29m
10 9.00kg
2.77m
12 10.50kg
GFBP - Glassfibre Platform
Stepladders
Code
GFBP3
GFBP4
GFBP5
GFBP6
GFBP7
GFBP8
GFBP10
GFBP12
Open
Height
1.23m
1.44m
1.67m
1.89m
2.1m
2.31m
2.73m
3.17m
Platform
Height
0.59m
0.82m
1.04m
1.26m
1.48m
1.69m
2.11m
2.56m
Height
1.33m 3 5.00kg
1.56m 4 6.00kg
1.8m
5 7.00kg
2.04m 6 8.00kg
2.27m 7 9.00kg
2.51m 8 10.00kg
3m
10 12.00kg
3.47m 12 14.00kg
ESP8
GFBP6
18
19
Widestep StepLadders
Industrial StepLadders
Aluminium Wide Step
SL - Industrial Swingback
Stepladders
● Certified to BS2037 Class 1
● Wide working platform of 400mm x 600mm
● A wide range of stepladders designed for
general trade or industrial use
● All aluminium frames and treads
● Suitable for industrial work as well as trade
use
● Double riveted with ‘K’ straps for additional
strength and stability
● Wheels at rear
● Safety chain for added security
● Non-slip treads and rubber feet also keep
steps stable
Optional Feature
● Robust working platform
● Ladder tag for inspection and maintenance
● Now manufactured with box section back
legs for extra strength and stability
Code
Open
Height
Height Height inc platform
BSWP3 1625mm 610mm 1780mm 3
BSWP4 1840mm 835mm 1980mm 4
BSWP5 2050mm 1050mm 2225mm 5
8.00kg
9.00kg
10.00kg
Code
BSWP4
SL5
Glass Fibre Wide Step
● Wide working platform of 400mm x 600mm
● Glass fibre frame with aluminium treads
SL3
SL4
SL5
SL6
SL7
SL8
SL9
SL10
SL11
SL12
SL13
Actual Open
Height
0.71m
1.00m
1.22m
1.46m
1.71m
1.95m
2.19m
2.44m
2.68m
2.93m
3.17m
Weight
Treads
3.20kg
4.10kg
5.00kg
5.90kg
6.80kg
8.20kg
9.10kg
10.00kg
10.90kg
11.80kg
13.20kg
3
4
5
6
7
8
9
10
11
12
13
● Suitable for industrial work as well as trade use
● Wheels at rear
● Safety chain for added security
Optional Feature
● Ladder tag for inspection and maintenance
Code
Open
Height
Height Height inc platform
GFWP3 1625mm 610mm 1780mm 3
GFWP4 1840mm 835mm 1980mm 4
GFWP5 2050mm 1050mm 2225mm 5
9.00kg
11.00kg
14.00kg
GFWP4
● Double rivets for harder wearing
20
● Heavy duty side arms for strength
21
Industrial StepLadders
Glassfibre StepLadders
SP - Extra Heavy Duty
Platform Steps
GSL - Heavy Duty Glassfibre
Swingback Stepladders
● Certified to BS2037 Class 1
● Designed as a heavy duty version of the
industrial platform step, available in a
larger range
● Non-conductive, so is ideal to use where
● Designed for general trade or industrial
use
● Box section back legs, heavy duty side
arms and heavy bracing ‘K’ straps provides
excellent strength and stability
● Non-slip treads and feet keep steps
stable
Code Open Height Actual Open Weight Rungs
to Platform
Height
SP6
1.46m
1.95m 9.50kg 6
SP8
1.95m
2.44m 12.30kg 8
SP10
2.44m
3.26m 15.00kg 10
SP12
2.93m
3.78m 17.70kg 12
SP14
3.42m
4.30m 20.90kg 14
SP16* 4.10m
4.60m 24.50kg 16
*not kitemarked
Code
Open Closed
Height Height
GSL4 0.99m 1.14m
GSL6 1.47m 1.64m
GSL8 1.93m 2.16m
GSL10 2.44m 2.69m
GSL12 2.91m 3.23m
GSL14* 3.42m 3.75m
*not kitemarked
GSL8
SP10
● Non-conductive, so is ideal to use where
● Designed for general trade or industrial
use
● Non-slip treads and feet keep steps
stable
Code
GSP6
Base Treads Weight
Span
0.76m 4 8.00kg
1.07m 6 10.00kg
1.50m 8 12.00kg
1.78m 10 15.00kg
2.13m 12 19.00kg
2.54m 14 23.00kg
GSP - Heavy Duty Glassfibre
Platform Stepladders
“strength
and stability
comes as
standard”
22
Base
Width
0.41m
0.46m
0.51m
0.56m
0.61m
0.66m
Open
Height
GSP4
1.47m
GSP6
1.93m
GSP8
2.44m
GSP10 2.91m
GSP12 3.38m
GSP14* 3.89m
*not kitemarked
Closed
Height
1.64m
2.16m
2.69m
3.23m
3.76m
4.29m
Platform Treads Weight
Height
0.98m
4 11.00kg
1.45m
6 14.00kg
1.94m
8 17.00kg
2.41m
10 20.00kg
2.90m
12 23.00kg
3.40m
14 26.00kg
23
Ladda Steps
Multi Purpose Ladders
LS - Ladda-Steps
MPL
● As its name suggests this versatile piece
of access equipment can be used as a
ladder and a step
● Compact dimensions for easy
transportation and storage
● Removable platform (4x3 only)
● It’s easy to convert with uncomplicated
locks
● Stabilisers for extra stability
● Simple ‘click lock’ hinge system
● Made from industrial material it provides a
durable solution to access problems
● Suitable for wide variety of uses
● Suitable for trade and domestic use
● EN131
Code Open Height Open Height
as Step
as Ladder
LS6/4 1.48m
2.55m
LS7/5 1.72m
3.07m
LS8/6 1.98m
3.62m
Weight Treads
7.00kg 6+4
8.00kg 7+5
9.00kg 8+6
MPL Frame
Code
LS7/5
Stepladder Platform Extension Product
Height
Height Ladder weight
MPL4X3 1753mm 920mm 3560mm 13.95kg
MPL4X4 2270mm
N/A
4680mm 15.55kg
MPL Platform
MPL Closed
24
MPL Extended 2
25
Telescopic Ladders
Combination Ladders
TLS
CL - Combination Ladder
● Adjustable, telescopic sections and simple
‘Click-Lock’ hinge system
● Combines a stepladder and extension
ladder in one product
● Can be used as a stepladder, stairwell
ladder and extension ladder
● Unique sliding mechanism for easy
conversion to all three ways
● Compact folded dimensions, very easy to
use, transport and store
● Wide base and heavy duty feet for stability
and grip
● Non-slip feet and splayed base for extra
stability
● Non-slip treads for comfort and security
● Suitable for professional and domestic use
● Compact folded dimensions for easy
transportation and storage
● Tested to EN131
● Stabilisers for extra stability
● Suitable for a wide variety of uses
● Suitable for trade and domestic use
● Certified to EN131
TLS
Code
Sections Stepladder Extension Product
x rungs Height
Ladder weight
Height
TLS4x4 4x4
1300mm
2660mm 13.70kg
to 2168mm to 4425mm
TLS Extended
TLS Hinge
26
CL
Code Folded Stepladder Extension Product
Height
Ladder Weight
Length
CL6 1680mm 2390mm 3280mm 9.20kg
CL7 1960mm 2924mm 4123mm 10.40kg
CL8 2240mm 3450mm 5064mm 12.30kg
CL9 2525mm 3906mm 5910mm 13.45kg
CL10 2800mm 4473mm 6740mm 15.20kg
TLS on stairs
TLS Extended
27
Professional Combi Ladder
Professional Combi Ladder
Aluminium combination ladder,
3-part ProfiStep® combi
Balance Pedal
One kick of the foot - the balance pedal
engages - and the ladder is safe to use. The
newly developed foot pedal allows you to
adjust the ladder quickly and precisely to different levels on the ground, making height
differences of up to 15cm! To adjust, all you
need to do is push the pedal forward with
your foot. Easy to use: no bending, no bolts.
The innovative level adjustment mechanism
now makes working on uneven ground safer
and more comfortable.
This combination ladder turns the three-part
ladder into a two-part extension ladder, a
simple lean-to ladder or even a free-standing
double-sided ladder, you decide!
The ultimate solution: flexible,
versatile and safe.
Easy to use
● Just set up the ladder using the foot pedal
Versatility
● Single ladder, extending ladder or
double-sided rung ladder
Safety
● Sturdy guide parts with plastic
gliders
● Fitted with locking device to use
during transport
● Square, sturdy grip rungs
● Can take loads up to 150 kg
● Feet on ladder and balance
pedal designed for
maximum contact with
surface
● Balance pedal bar fitted
with manual locking
pedal
● Two highly tearresistant tension
straps
● Locking via
balance pedal
● ITS/GS + BGV
D 36 safety
tested
● Manufactured
to EN 131
● VDL safety
tested
9309-501
Code
Rungs
9306-501 2x6 + 1x5
9309-501 2x9 + 1x8
9312-501 3x12
Closed
Height
Stepladder
Height
1.92m
2.72m
3.57m
2.85m
4.18m
5.53m
Extension
Ladder
Height
3.70m
5.60m
8.15m
Max Achievable
Working Height
9306-501
Weight
(Extension Ladder)
4.80m
6.70m
9.25m
15.40kg
21.50kg
30.50kg
28 Order Now! Call: 01639 846800
29
Multi-purpose Platforms
Specialist Ladders
Aluminium mini scaffold with
working platform ProfiStep® multi
Universal aluminium ladder
HobbyStep® (3-way ladder)
● Can be used on staircases
● Single or double-length lean-to ladder or
free-standing double-sided rung ladder
with step adjustment
● Platform (125 x 50 cm) height adjustable in
28 - 100 cm increments
● Sturdy locking hooks made from
galvanized steel
● Aluminium right-angled struts
● Safety rail
● 2 cross pieces
● Wide stiles and rungs, extremely solid joins
and double beaded
● Inc. assembly parts
● Wide crosspiece
● Load capacity: max. 150 kg
● Can take loads up to 150 kg
● Achievable working height – 3m
● Adjustable tension strap
● Weight 12.90kg
● ITS/GS + BGV D 36 safety tested
● Platform width – 0.5m
● Manufactured to EN 131
● Platform length – 1.25m
● VDL safety tested
● Stabiliser width – 0.85m
● Height (full height of mini scaffold) – 1.53m
● ITS/GS + BGV D 36 safety tested
9470-001
121260
Discover the ideal multifunctional ladder for the home! It offers all three options in one: lean-to
ladder, trestle ladder and extending ladder. The brilliant connecting system enables variable
height adjustment. This means that the ladder can be assembled even in narrow stairwells. The
wide crosspiece ensures a safe base.
● VDL safety tested
Code
Multi-purpose ladder and
platform system
● A solid foundation for jobs requiring more
time and freedom of movement
● Wide working surface: 150 x 50 cm
● 2 separately usable ladder elements, 6
rungs each
Rungs
1212-601 1x6
rungs
+ 1x5
rungs
Height of Ladder
Step Extension Stairwell
Ladder Ladder
Ladder
Achievable working height Weight
Step Extension Stairwell
Ladder Ladder
Ladder
1.68m
2.75m
2.50m
1.50m
3.50m
3.20m
5.60kg
WS - Warehouse Steps
● 2 sturdy crosspieces on each ladder element for more stability
● Load capacity: max. 150 kg
aluminium
● Manufactured to EN 131
● Ideal for warehouse and factory use
● Heavy duty back support legs and side
handrails
● Rear wheels for easy positioning
● Additional bracing ensures a strong robust
product
Code
Ladder
Base to
Closed height Stepladder Extension Max achievable Weight
rungs platform of
of ladder
height
ladder working height
mini scaffold
sections
height (extension ladder)
HD628
2x6
0.77m
1.69m
1.63m
2.72m
3.82m
● WS8-14 are supplied as a flat pack
18.00kg
WS5
30
Code Open Height
to Platform
WS4
1.00m
WS5
1.22m
WS6
1.46m
WS7
1.71m
WS8
1.95m
WS10
2.44m
WS12
2.93m
WS14
3.42m
Weight
Rungs
9.90kg
11.30kg
12.70kg
14.50kg
15.90kg
20.00kg
23.60kg
26.80kg
4
5
6
7
8
10
12
14
31
Specialist Ladders
Specialist Ladders
FPT Ladder
LD - Double Sided
Platform / Library Steps
● Constructed from industrial duty aluminum
and used by professional groundsmen
Code
Double
Sided
LD3
LD4
LD5
● Allows the user to work close to hedges,
bushes and trees with rear spiked support.
● Channel section side stiles fitted with 3” /
76mm deep non-slip treads and rubber
feet at base.
● Heavy duty rear leg is hinged at the top
and fitted with a sturdy ground spike for
extra security. Additional interchangeable
non-slip rubber foot also supplied for safe
use on hard surfaces, available on request
only.
Height
to
Platform
0.73m
0.98m
1.22m
Weight
Rungs
7.50kg
9.00kg
11.00kg
3
4
5
LD4
● Lightweight, mobile, yet very strong. A
must for all serious professionals.
Code
Open
Height
Closed
Height
SX - Shelf Ladders
Treads Product
Weight
● Specifically designed for access to and from
shelving units
(Not including
the top)
FPT1
FPT2
FPT3
FPT4
FPT5
1720mm 1900mm
2210mm 2480mm
2930mm 3210mm
3530mm 3910mm
3920mm 4170mm
5
7
10
12
14
7.00 kg
9.00kg
12.00kg
15.00kg
19.00kg
● Lightweight but extremely rigid
● Timber cross rail fitted as standard, shafting
hooks fitted on request
Code
FPT
L / LD - Platform / Library Steps
aluminium
● Non-slip treads and a large non-slip
platform provides a safe working area
SX
● Single sided step with optional handrails &
handposts
● Also available as a double sided step
L - Single Sided
Platform / Library Steps
L4
Code
Single
Sided
L3
L4
L5
Height
to
Platform
0.73m
0.98m
1.22m
Weight
Rungs
6.50kg
8.00kg
9.00kg
3
4
5
SX5
SX6
SX7
SX8
SX9
SX10
SX11
SX12
SX13
Sectional ‘Surveyors’ Ladders
● Interlocking sectional ladders,
manufactured in oval section with serrated
rungs
● Very easy to use, designed for inspection
purposes only and can be easily stored in
the boot of a car
● Each section is supplied with aluminium
locating spigots, which are inserted into
the stiles of the next section
● Safe, light ladder that can extend to 5.4 m
Code
SU2
SU3
SU4
SU5
SU6
32
Overall Work Weight Treads
Length Height
1.34m 1.20m 3.50kg
5
1.60m 1.46m 4.00kg
6
1.86m 1.71m 4.50kg
7
2.12m 1.95m 5.00kg
8
2.39m 2.20m 5.90kg
9
2.65m 2.44m 6.40kg 10
2.92m 2.68m 7.30kg 11
3.18m 2.93m 7.70kg 12
3.45m 3.17m 8.60kg 13
Length
1.80m
2.70m
3.60m
4.50m
5.40m
Weight No. of sections
4.10kg
2
5.90kg
3
8.20kg
4
10.00kg
5
11.8kg
6
33
Loft Ladders
Accessories
LYTE EASILOFT
2 and 3 Section Loft Ladders
1
1. Ridge hook
Fitted as standard to the Lyte Roof ladder, the
hook becomes the Anchor of the system.
● Factory assembled - installs in minutes
● Certified to BS 7553: 1992 Class G
(General use)
● Clear and easy to follow instructions
2. Rojack
● Box section styles for strength and comfort
This unique rubber based platform greatly
increases the footprint of the ladder, helping
prevent slip of the base of the ladder.
● Spring loaded catches, safer and stronger
● Handrail included on double and triple
● Non slip rubber feet for safety
3. Ladder stay
● Maximum load 15.7 stone
2
Product Code
LEL2
LEL3
sections
2
3
max floor to floor
2.67m
3.0m
min loft clearance
1250mm
1050mm
min loft opening
457x560mm 432x508mm
4. The Multistopper
2 part EASILOFT - LEL2
LEL2
3
MIN
Loft Clearance
Required
1250mm
MS24 for Industrial/Trade use is suitable for
ladders up to 22 inches (55cms) wide and can
be used with or without Stopper Feet. Stopper
Feet with integrated stile extenders can be fitted permanently or temporarily to any ladder.
Used with or without MS24. Feet by themselves perform same function as STO18.
Helps prevent bottom slip on all surfaces
including uneven ones.
Used in conjunction with MS24 becomes the
MultiStopper System which:● Helps prevent bottom slip
MIN
Loft opening
457mm wide
560mm long
MAX
Ground floor
to loft floor
height 2.67m
Not only does this device increase the width
of the extension ladder reducing the risk of
ladder twist/slip, also prevents damage to
guttering!
● Helps prevent top movement
● Levels on all surfaces; uneven, sloping,
2.67m MAX
and with insert can be used on stairs
● Fastens the Stopper base to the ladder
LEL3
4
MIN
Loft Clearance
Required
1050mm
MIN
Loft opening
432mm wide
508mm long
3 part EASILOFT - LEL3
MAX
Ground floor
to loft floor
height 3.0m
3.0m MAX
34 Order Now! Call: 01639 846800
35
Accessories
Trestles & Staging Boards
Lightweight Staging Boards Standard width and extra wide
A. Step Feet
C
Solid moulded rubber feet designed to ensure
ultimate grip on a variety of floor surfaces
D
● Manufactured to BS2037 Class1
● Can be used in conjunction with various
handrail systems
B. Ladder Feet
E
PVC moulded feet give all round secure footing
to the whole ladder range
B
C. Rubber Suction Feet
● Rubber inserts for additional grip
Designed to give good grip on shiny surfaces
● Aluminium struts
● Rubber end caps
D. Articulated Feet
A
A
● “K” straps – fitted to end struts
Solid rubber moulded feet are designed to give
good grip on a variety of surfaces. Manufactured
to fit all box section and timber ladders
Code
F
● Available in 2.4m to 7.2m
● Non slip rot proof decking
B
C1006
one pair
E. Wall Running Wheels
Replacement heavy duty solid rubber wheels
complete with fixings
Code
WRW
one pair
Rope Kit (not shown)
Replacement nylon rope kit for heavy duty
extension ladders
Code
HDROPE
Double Extension Ladder Rope Kit
HTROPE
Triple Extension Ladder Rope Kit
When ordering, please quote the length of the ladder.
F. Ridge Hook
G
● Replacement hook for trade and industrial
roof ladders
● Easily attached
Code
RHW
Universal Roof Hook (not shown)
● Designed to turn any ladder into a roof
ladder
● Aluminium hook and wheels
● Easily attached
Code
ARH
Length
2.4m
3.0m
3.6m
4.2m
4.8m
5.4m
6.0m
6.6m
7.2m
Weight
11.18kg
13.16kg
16.77kg
18.92kg
20.21kg
28.38kg
30.96kg
37.84kg
40.42kg
Code
PROEX24
PROEX30
PROEX36
PROEX42
PROEX48
PROEX54
PROEX60
PROEX66
PROEX72
Width
600mm
600mm
600mm
600mm
600mm
600mm
600mm
600mm
600mm
Length
2.4m
3.0m
3.6m
4.2m
4.8m
5.4m
6.0m
6.6m
7.2m
Weight
14.96kg
17.63kg
22.53kg
25.37kg
27.09kg
38.27kg
41.71kg
51.00kg
54.52kg
● Tested and certified to BS2037 Class1
● Designed to keep the top end of the ladder
300mm away from a solid surface, to assist
in painting, glazing and general maintenance
● Easy to attach and detach, suitable for
domestic, trade and industrial use
Code
Width
450mm
450mm
450mm
450mm
450mm
450mm
450mm
450mm
450mm
PTP - Trestle - Suitable for both
450mm and 600mm boards
G. Ladder Stay
H
Code
PRO24
PRO30
PRO36
PRO42
PRO48
PRO54
PRO60
PRO66
PRO72
● Available in various configurations for use
with other trestles
● Designed not to oversplay and split
LLS
H. Rack Clamps
● Easy to use clamps designed to lock ladders
and steps securely in place whilst on a roof
rack
● Available with or without padlocks
Code
● Handposts and handrails available.
For more information on requirements
contact us on 01639 846800
Code
PTP1
PTP2
PTP3
PTP4
Open Height
1740mm
2300mm
2900mm
3500mm
Weight
12.70kg
15.90kg
20.00kg
23.60kg
C1443 one pair
C1443A one pair with padlocks
36
37
Podium Steps
POD960
Low Level Work Platform
● Meets all the requirements of the new
Working at Heights Regulations - this item
provides an excellent alternative to step
ladders.
WPS 1 & 2
● The work platform offers massive safety:
1000mm all round lockable guardrail
system with non-slip platform surface even in the rain.
● Non slip platform
● ‘Locking’ 360º rotating wheels, for added
safety & stability.
● Lightweight - easy to transport
● Offers flexibility for working in all locations
- folds up in seconds & fits through a
standard door way - back of vans or on a
roof rack.
● Simple and safe to use with locking
hinges for added safety
● Perfect for all odd jobs
● Compact folded dimensions
● Tested to EN131
WPS1
● Available in 2 lengths,
600mm and 1000mm
Code Platform
Width
WPS1 300mm
WPS2 300mm
● It is self contained in one piece & can
easily be handled by one person.
● Is manufactured from aluminium - is a
lightweight product, durable and will
provide an exceptional work tool for all
users.
Platform Platform
Length Height
600mm 480mm
1000mm 480mm
Product
Weight
4.65kg
5.60kg
● Is made to Lyte Industries highest quality of
UK manufacture.
Podium 960mm
Depth
1200mm
Open
Height
Open
Width
Weight
1830mm
650mm
32.00kg
Open
Height
Open
Width
Weight
2210mm
650mm
37.50kg
Open
Height
Open
Width
Weight
2430mm
650mm
38.50kg
Open
Height
Open
Width
Weight
2680mm
650mm
40.00kg
Open
Height
Open
Width
Weight
2930mm
650mm
42.00kg
WPS2
POD14
Podium 1.2
Depth
1200mm
Podium 1.4
Depth
1200mm
WPS lock
A truely reliable
lightweight low
level work
platform
Podium 1.7
Depth
1200mm
Podium 2.0
Depth
1200mm
★
WPS lock open
Please remember - a thorough risk
assessment must be carried out prior to
any work being undertaken at height.
38
39
Roof Buddy
Roof Buddy
The Roof Buddy System
Ladder Stopper
The RoofBuddy is a unique product
designed and engineered to make work on
roofs safer than ever before. Offering a
comprehensive 4-point safety system, the
RoofBuddy provides an integral safety
solution with the highest quality access
equipment from Lyte Ladders and Towers.
This unique rubber based platform greatly increases the
footprint of the ladder, thus helping prevent the base of the
ladder from slipping.
Anchor Points
These are fitted at the top of the roof ladder near the ridge
hook as a safe anchor point for the harness kit.
Ladder Stay
Roof Buddy - The Package
Not only does this device increase the width of the extension
ladder reducing the risk of ladder twist/slip, it also prevents
damage to guttering!
Roof Buddy
This unique bracket forms
the centre point of the “Safe working system”. Manufactured
specifically for the Lyte Ladder profile, this bracket “locks”
the roof and upright ladder together, thus providing the fixed
system.
Fall Arrest Harness Kit
Extension Ladder
3 Section extension ladder to access the roof.
Dimensions:
Closed height 4.04m
Extended height 10.22m
This consists of:
Full body harness
Anchorage line
‘Y’ Link
Cowstails sling
Rocker
Karabiners.
Training
Full training on the use of the RoofBuddy system and the
safe use of ladders.
Roof Ladder with Ridge Hook
Specially designed double section roof ladder with ridge hook
fitted as standard, the hook becomes the Anchor of the
system.
Dimensions:
Closed height 2.72m
Extended height 4.7m
Devised in conjunction with British Gas & Lyte Industries
40
41
LIFT System
LIFT System
Component Schedule
Platform Height (Max)
0.6m 1.6m 2.1m 3.1m 3.6m 4.6m 5.1m 6.1m
125mm castors (standard)
4
4
4
4
4
4
4
4
150mm castors (For adjustable legs only)
4*
4*
4*
4*
4*
4*
4*
4*
Adjustable legs
4*
4*
4*
4*
4*
4*
4*
4*
Base Unit
1
1
1
1
1
1
1
1
6 rung frame
0
0
2
2
4
4
6
2
8 rung frame
0
0
0
0
0
0
0
4
1.8 hatch deck
1
1
1
2
2
2
2
3
4 rung frame
0
2
0
2
0
2
0
0
Lyte Industrial Folding Tower System - LIFT
1.8m horizontal brace
3
5
5
9
9
9
9
13
● Base can be used alone, or increased by a
further 3 lifts which can give an extra 7
platform heights (using extra components)
2.1m Diagonal brace
0
1
2
3
3
4
5
6
1.8 toe board length
2
2
2
2
2
2
2
2
1.2 Toe board end
2
2
2
2
2
2
2
2
0
4
4
4
4
0
0
0
Telescopic Stabiliser
0
4*
4*
4*
4*
4
4
4
Folding ‘base mechanism’
- a truly portable
tower
● Narrow tower width – compact & easy
storage
● Tested and certified to BS EN1004
● Quick release pull rings with stainless steel
pin on all bracings for easy assembly
● Fits easily into most small vans or
estate cars
● Smooth & ribbed texture on braces for quick
identification
Standard Stabiliser
● Quick and easy to erect – saving time on
each job
★ Please remember - a thorough risk
assessment must be carried out prior to
any work being undertaken at height
* Indicates optional components
* Indicates fewer horizontals needed because gate-frame acts as a guardrail.
42
43
Helix Industrial Tower System
● Tested and certified to BS1139 (Part 3)
1994 and HD1004 *
● Dual brake on/off system
● Quick release pull rings with stainless
steel pin on all bracings
● Smooth & ribbed tubing on braces for
quick identification
● Wide ladder with hexagonal rung for
easier climb & additional safety
● Large, articulated rubber feet on all
stabilisers
* Certification correct at time of print.
Technical Specification
● Two widths available 1.45m & 0.85m
● Three lengths available 1.8m 2.5m & 3.2m
● Extruded tube diameter 50.8mm
● Extruded tube thickness 1.6mm
● 3mm Frame spigots
● Extruded aluminium ladder stile & rung
● Heat treated gravity castings
● Stainless steel bracing lock pins
● Articulated rubber feet
● Spring steel frame lock clips
● Reinforced platforms
44
45
HiLyte Industrial Tower System
Lyte 3T Industrial Tower System Single Width to HD1004:2004 1.8m 2.5m
Component Schedule
Platform Height (metres)
Internal or external work
Internal only
1.2 1.7 2.2 2.7 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2
8.7 9.2 9.7 10.2 10.7 11.2 11.712.2
150mm Dual Locking Castor - DLC 4 4 4 4 4 4 4 4 4 4 4 4 4 4
4 4 4 4
4
4
Adjustable Leg - ALH
4 4 4 4 4 4 4 4 4 4 4 4 4 4
4 4 4 4
4
4
4 4
2 Rung Span Frame - 2RSWSF
-
-
-
-
1 1
1 1
-
1 1 1 1 -
-
1 1
-
-
1 1
-
1 1
4 4
2 Rung Ladder Frame - 2RSWLF
-
1 1
-
-
1 1
-
-
1 1
-
-
1 1
-
-
1 1
-
1 -
1 1
- 1
-
1
-
1 -
1 -
1
-
1
-
1
-
1
-
-
1 -
1 1
- 1
-
1
-
1 -
1 -
1
-
1
-
1
-
1
-
1
- 1 1 1 2 2 3 2 3 3 4 3 4
4 5 4 5
5
6
5 6
1
- 1 1 1 2 2 3 2 3 3 4 3 4
4 5 4 5
5
6
5 6
1.8m-2.5m-3.2m Hatch Deck
1 1 1 1 2 2 3 3 3 3 4 4 4 4
5 5 5 5
6
6
6 6
1.8m-2.5m-3.2m Horizontal Brace 6 6 6 6 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26
2.1m-2.7m-3.4m Diagonal Brace 2 4 4 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
1.8m-2.5m-3.2m Side Toe Board
2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2
2
2
2 2
Single Width Toe Board End
2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2
2
2
2 2
Standard Stabiliser
-
- 4 4 4 4 -
-
-
-
-
Large Telescopic Stabiliser
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- 4 4 4 4
-
-
-
-
4 4 4
-
-
-
-
-
-
- -
4 4 4 4
-
4
4
4
4 4
-
-
-
-
-
-
-
Component Schedule based on 3T specification
Lyte 3T Industrial Tower System Double Width to HD1004:2004 1.8m 2.5m
Component Schedule
Internal only
1.2 1.7 2.2 2.7 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2
8.7 9.2 9.7 10.2 10.7 11.2 11.712.2
150mm Dual Locking Castor
4 4 4 4 4 4 4 4 4 4 4 4 4 4
4 4 4 4
4
4
Adjustable Leg
4 4 4 4 4 4 4 4 4 4 4 4 4 4
4 4 4 4
4
4
4 4
2 Rung Span Frame - 2RDWSF
-
-
-
-
1 1
1 1
-
1 1 1 1 -
-
1 1
-
-
1 1
-
1 1
4 4
2 Rung Ladder Frame - 2RDWLF
-
1 1
-
-
1 1
-
-
1 1
-
-
1 1
-
-
1 1
-
1 -
1 1
- 1
-
1
-
1 -
1 -
1
-
1
-
1
-
1
-
-
1 -
1 1
- 1
-
1
-
1 -
1 -
1
-
1
-
1
-
1
-
1
- 1 1 1 2 2 3 2 3 3 4 3 4
4 5 4 5
5
6
5 6
1
- 1 1 1 2 2 3 2 3 3 4 3 4
4 5 4 5
5
6
5 6
1.8m-2.5m-3.2m Hatch Deck
1 1 1 1 2 2 3 3 3 3 4 4 4 4
5 5 5 5
6
6
6 6
1.8m-2.5m-3.2m Standard Deck
1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1
1
1
1 1
1.8m-2.5m-3.2m Horizontal Brace 6 6 6 6 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26
2.1m-2.7m-3.4m Diagonal Brace 2 4 4 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
1.8m-2.5m-3.2m Side Toe Board
2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2
2
2
2 2
Double Width Toe Board End
2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2
2
2
2 2
Standard Stabiliser
-
- 4 4 4 4 4 4 4 4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
4 -
-
-
4 4 4
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
- 4 4 4
-
4
4
4
4 4
-
-
-
Component Schedule based on 3T specification
46
47
The new HiLyte Tower has been introduced to our successful Tower and Welded product range,
as a result of continuous product research, development and innovation.
The 250mm span frame pitch and double hatchdeck enables users to comply with 3T
regulations with ease.
The HiLyte Tower affirms our ongoing commitment to the ever-changing world of Health and
Safety in the access equipment industry.
The HiLyte Tower can offer you:
• 250mm pitch span frame for strength, stability and ease of use.
QUANTITY SCHEDULE HiLyte Industrial Tower System
Single Width to BSEN1004:2004 1.8m 2.5m
Component Schedule
1.2 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2
Internal only
8.7 9.2 9.7 10.2 10.7 11.2 11.7 12.2
4 4
4 4 4 4 4 4 4 4 4
4 4 4 4
4
4 4 4
4
4
4
4
4 4
4 4 4 4 4 4 4 4 4
4 4 4 4
4
4 4 4
4
4
4
4
4 Rung Access Frame - HL4SW - 2
2 -
-
2 2 -
-
2 2
-
- 2 2
-
- 2 2
-
-
2
2
6 Rung Access Frame - HL6SW - 2
- 2
-
2
-
2
-
2 - 2 -
2
- 2
2
-
2
-
8 Rung Access Frame - HL8SW 2
2 2 4 2 4 4 6 4 6
6 8 6 8
8 10 8 10 10 12 10 12
4 4 4 4
5
- 2
-
Hatch Decks
1 1
1 2 2 2 2 3 3 3 3
• New colour coded braces for effortless assembly.
Horizontal Brace
6 6
6 10 10 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26
• Smooth and ribbed tubing on braces for quick identification.
Diagonal Brace
2 4
4 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
• Double hatchdeck for ease of assembly and safe use.
Side Toe Board
2 2
2 2 2 2 2 2 2 2 2
2 2 2 2
2
2 2 2
2
2
2
2
• Choice of toeboards: standard wooden,
or new aluminium folding unit*.
- SW as per deck length
• Fully complies with latest regulations, product standards and requirements - including the 3T
method of assembly
• Dual brake on/off system.
• Castings on every rung.
5 5 5
6
6
6
6
End Toe Board - TBESW
2 2
2 2 2 2 2 2 2 2 2
2 2 2 2
2
2 2 2
2
2
2
2
Standard Stabiliser
- -
4 4 4 4 4 -
-
-
-
- -
-
- -
-
-
-
-
-
- -
- -
-
-
- 4 4 4 4
-
-
- -
4
4 4
-
-
-
-
-
- -
- -
-
-
- -
4 4 4 4
-
- -
4
4
4
4
4
-
-
-
-
-
Components schedule based on 3T specification
• Quick release.
• Large, articulated rubber feet on all stabilisers.
• Certified to BSEN1004:2004
QUANTITY SCHEDULE HiLyte Industrial Tower System
Double Width to BSEN1004:2004 1.8m 2.5m
Component Schedule
1.2 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2
Internal only
8.7 9.2 9.7 10.2 10.7 11.2 11.7 12.2
4 4
4 4 4 4 4 4 4 4 4
4 4 4 4
4
4 4 4
4
4
4
4
4 4
4 4 4 4 4 4 4 4 4
4 4 4 4
4
4 4 4
4
4
4
4
4 Rung Access Frame DW-HL4SW - 2
2 -
-
2 2 -
-
2 2
-
- 2 2
-
- 2 2
-
-
2
2
6 Rung Access Frame DW-HL6SW - 2
- 2
-
2
-
2
-
2 - 2 -
2
- 2
2
-
2
-
8 Rung Access Frame DW-HL8SW 2 -
2 2 4 2 4 4 6 4 6
6 8 6 8
8 10 8 10 10 12 10 12
- 2
-
Hatch Decks
1 1
1 2 2 2 2 3 3 3 3
4 4 4 4
5
5 5 5
6
6
6
6
Standard Deck
1 1
1 1 1 1 1 1 1 1 1
1 1 1 1
1
1 1 1
1
1
1
1
Horizontal Brace
6 6
6 10 10 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26
Diagonal Brace
2 4
4 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24
Side Toe Board
2 2
2 2 2 2 2 2 2 2 2
2 2 2 2
2
2 2 2
2
2
2
2
- DW as per deck length
End Toe Board - TBEDW
2 2
2 2 2 2 2 2 2 2 2
2 2 2 2
2
2 2 2
2
2
2
2
Standard Stabiliser
- -
4 4 4 4 4 -
-
-
-
- -
-
- -
-
-
-
-
-
- -
- -
-
-
- 4 4 4 4
-
-
- -
4
4 4
-
-
-
-
-
- -
- -
-
-
- -
4 4 4 4
-
- -
4
4
4
4
4
-
-
-
-
-
Components schedule based on 3T specification
48
49
Tower Safety Training
Ladder Safety Training
PASMA PROFESSIONAL TRAINING
The Work at Height Regulations 2005, require that the assembly, dismantling or
alteration of Mobile Access Towers should only be undertaken by a competent person,
or if being trained, under the supervision of a competent person.
A competent person is a person who can demonstrate that they have sufficient
professional or technical training, knowledge, actual experience, and authority* to
enable them to:
a. carry out their assigned duties at the level of responsibility allocated to them;
b. understand any potential hazards related to the work (or equipment) under
consideration;
c. detect any technical defects or omissions in that work (or equipment), recognise
any implications for health and safety caused by those defects or omissions, and be
able to specify a remedial action to mitigate those implications.
*Note: “authority” here means delegated authority to the individual by his employer to
carry out a certain function or duty.
Going onto or assembling a mobile access tower will involve working at height. The
Advisory Committee on Work at Height Training (ACWAHT) indicate that for anyone who
works at height, the above definition of a competent person implies:
To know and understand the specific legal duties under the Work at Height Regulations
which apply to them as an individual
• To understand who controls their activity and the lines of communication to use
• To understand the principles of fall protection that the Regulations require to be used
• To be able to recognise safe and unsafe situations / activities
• To understand how to deal with the hazards associated with the task allocated to
them
• To have adequate training in the correct use and limitations of any work equipment
allocated to them for the task
• To understand the need for and the ability to check the adequacy of the safety
equipment allocated to them
• If that equipment has been issued to them on a personal basis, an understanding of
the correct procedure for storage, maintenance and inspection
• To understand safe procedures of work and state the correct procedure for the task,
the emergency (including rescue) procedures in place for the work and their role in it
Ladders & Step Ladders Training Course
* Produced in Association with the BLMA
* Nationally Recognised
Course contents:
• Working at Height Regulations. (WAHR)
• Risk assessments for ladders and step ladders.
• Inspection of ladders and step ladders.
• Selection of correct type of ladder/stepladder.
• To know the procedure for reporting any defects, hazards or unsafe procedures they
detect
• Safe use of ladders and step ladders.
• PASMA therefore sponsors training courses provided only by authorised training
members.
On completion of the course each delegate will be issued with a
BLMA Certificate and a Training Scheme Photo Identification Card.
For further information contact Lyte Industries Training Centre
Tel: 01639 846801
50
e-mail: [email protected]
51
Using Ladders - Top Tips
Conditions of Sale
1. Acceptance and Cancellation
(1) No order for Seller’s goods (whether pursuant to a quotation by Seller or otherwise) is binding on Seller until
acknowledged in writing by Seller.
Do’s
Do place the ladder / step-ladder
on a firm, level, dry surface.
Do position the ladder so that the
base won’t slip outwards, and
with the top resting against a
solid surface.
Remember the rule:
‘One Out for Four Up’
Do keep your body facing the
ladder at all times.
Don’ts
Don’t put a ladder / step-ladder
on top of boxes, bricks or any
unstable surface to get more
height.
Don’t move the ladder base out
from this position - there’s more
risk of it slipping outwards
without warning.
Don’t reach too far forwards or
sideways, or stand with one foot
on the ladder and the other on
something else.
Don’t work sideways-on to the
work with a step-ladder.
Do check that there are no
overhead hazards near where you
are going to work.
52
(3) No order shall be subject to other conditions or to modifications of these Conditions unless Seller agrees
thereto in writing and Seller shall not be deemed to accept such other conditions nor to waive any of these
Conditions by failing to object to provisions contained in any purchase order or other communication from
Buyer.
2. Seller’s Specifications Prices and Charges
(1) All descriptions, specifications, drawings and particulars of weights and dimensions submitted by Seller are
to be deemed approximate only, and descriptions and illustrations in Seller’s catalogues, price lists and other
advertising matter shall not form any part of contract.
(2) Until an order has become binding on Seller all prices are subject to change without prior notice.
(3) After an order has become binding on Seller all prices are subject to variations from time to time in list
prices and any variations in costs (including without limitation, costs of materials, labour, transport and any tax,
fee or charge imposed by any government or other authority) prior to delivery.
Do position the step-ladder fronton to the work.
Do keep a secure grip at all
times, and use a tool holster or
shoulder bag if you need to carry
tools.
(2) Each order is subject to other Conditions of Sale to which Buyer shall be deemed to assent.
3. Payment
(1) Unless otherwise agreed by the Seller, or stated in acknowledgement of order, net invoice amount shall
become due for payment 30 days from date of invoice.
(2) Seller reserves the right at any time to demand full or partial payment before proceeding or proceeding
further with an order.
(3) If Buyer defaults in payment Seller may, in addition to exercising right contained in Condition 3(2), delay
delivery or cancel contract , also cancel other orders received from Buyer and charge interest on any overdue
payment at a rate of 2% per month.
4. Delivery of Goods
(1) Property in goods shall not pass to the Buyer until the Buyer has paid to the Seller the whole price thereof.
All risk of loss or damage in transit, shall pass to the Buyer when goods delivered to Buyer. Delivery to a
carrier or to any person, firm or company on Buyer’s behalf shall constitute delivery to the Buyer. Where goods
unascertained, all risk of loss or damage in transit shall pass to Buyer notwithstanding that property in goods
may not have been passed to the Buyer on delivery to Buyer.
(2) Where goods sold f.o.b. or c.i.f. all risk of loss or damage in transit shall pass to the Buyer when goods
placed on board ship, notwithstanding that the property in goods may not have been passed to the Buyer and
Seller shall be under no obligation to give to Buyer notice of specified in section 2(3) of Sale of Goods Act,
1983.
(3) Any time or date specified by Seller as time at which or date on which goods will be delivered given is
intended as estimate only and Seller shall not be liable for any loss, damage or expenses whatsoever arising
from delay in delivery.
(4) Buyer shall at request of Seller supply Seller with details necessary to allow Seller to make delivery and
shall accept delivery whenever Seller proffers delivery. If Buyer does not comply with foregoing it shall
indemnify Seller against any consequent loss, damage or expense and Seller may cancel intended delivery
related, without prejudice to its right to claim damages in respect of such breach of contract.
(5) Seller reserves the right to make delivery by instalments unless otherwise expressly stipulated in contract.
Paragraph (6) of this condition shall apply (mutatis mutandis) to each instalment or delivery.
Don’t put loose tools where they
could move or fall and cause an
injury.
Don’t forget
- never over-reach.
(6) Delivery of goods of a different description not included in contract shall not entitle Buyer to reject goods
delivered and Buyer shall treat such delivery as full performance by Seller and of its contractual duty to deliver.
(7) Seller shall be entitled to cancel delivery in whole or in part when it is delayed in or prevented from making
delivery by strikes, lockouts, trade disputes or labour troubles or any cause beyond Seller’s control, including,
but without limitation, act of God, act of Buyer, embargo or other government Act, regulation or request, fire,
accident, war, riot, delay in transportation, inability to obtain adequate labour, materials or manufacturing
facilities. Seller shall not be bound to obtain in market goods with which to replace goods delivery of which
has been cancelled as a result of any said events.
5. Notification of Delivery Query
Claims in respect of error in quality, quantity and condition of goods delivered must be made to Seller within 7
days of receipt . Failure to make such notification shall constitute unqualified acceptance of goods and waiver
by Buyer of all claims relating to error in quality, quantity and condition of goods delivered. Formal proof of
notification will constitute a unique reference number that can be obtained from the seller.
53
Credit Account Application
6. Conditions, Warranties and Return of Goods
(1) Each of Seller and Buyer shall be regarded as having received no representation made by or on behalf of
other of them before contract was entered into, which in anyway induced it to enter into contract, but this shall
not apply to any representation made to one party or on behalf of other which was reduced in writing and
signed by or on behalf of representor and was in possession of representee prior to making of contract, and in
particular, without prejudice to generality of foregoing those recorded in order or acknowledgement of it.
To apply for a credit account please complete, detach and return
this form to Lyte Industries (Wales) Ltd at address shown.
Company Name:
Address:
(2) Seller warrants that it has right to sell goods and that goods are free from any liens unknown to Buyer.
(3) Seller undertakes to repair or replace any goods which are shown by Buyer to Seller’s satisfaction to be
defective as a result of a defect in materials or workmanship provided:
(i) Buyer within 7 days of receiving goods notifies Seller of such defect and claims to return goods; and
Accounts Dept: (if different)
Address:
County:
(ii) Seller consents to such return (such consent being, at Seller’s option, conditional on goods being returned
carriage prepaid) and furnishes Buyer with re-delivery instructions; and
Post Code:
County:
(iii) Seller shall be entitled to make such test or inspection as it thinks fit before consenting to goods being
returned accordingly, Buyer shall preserve intact goods which it claims to return for a period of 90 days after
such claim is made. Failure to make such a claim shall constitute unqualified acceptance of goods and waiver
by Buyer of all claims relating to defects in materials or workmanship. This undertaking shall not apply where
an attempt has been made other than by Seller to remove defect or where Seller is satisfied that goods have
been improperly used, maintained, stored or serviced.
Telephone:
Post Code:
Fax:
Telephone:
Email:
Fax:
(4) Where goods are returned by Buyer and accepted as defective by Seller, Seller shall at its option either
repair or replace such goods without cost to Buyer or allow Buyer credit therefore, Buyer shall not be entitled
to make any claim in respect of such goods for work done thereon, transport costs, loss of profit on resale or
in sale respect of claim, loss, damage or expense whatsoever other than replacement cost thereof, nor shall
Buyer be entitled to treat delivery of such defective goods as ground for repudiating contract or for cancelling
further deliveries.
or cancel contract , also cancel other orders received from Buyer and charge interest on any overdue payment
(5) Subject only to paragraph (1) of this condition, no statement, undertaking, warranty or conditions express or
implied, statutory or otherwise, not stated in these Conditions shall apply to contract.
(6) Buyer undertakes to indemnify Seller against all claims relating to goods sold to Buyer by Seller in respect
of any loss, damage or expense by any third party, howsoever caused.
Holding/Parent Co:
Company Reg No:
V.A.T No:
Your Company Bank Details
Partnership/Sole Trader Only
Banker’s Name:
Trading Title:
Address:
Name of partner(s):
Account No:
Home Address:
(7) In relation to goods not manufactured by the Seller, provisions of this condition shall apply only where Seller
is, in its own opinion, entitled to claim from supplier to it the loss, damage or expense made by Buyer from
Seller.
7. Exclusions
Save as herein before provided no undertaking, warranty or condition, express or implied, statutory or
otherwise, shall apply to contract.
8. Tests and inspections
Unless otherwise agreed any test or inspection other than or in excess of those required in Buyer’s
specification, shall be conducted at Seller ’s works and Buyer shall pay a reasonable charge therefor.
9. Patents etc
In cases where buyer provides drawings, designs, models or specifications, for the purpose of enabling the
Seller to provide goods according to Buyer’s design, the Buyer shall indemnify the Seller against all actions,
claims, costs, damages or losses arising from any infringement of letters patent, design, trademark or
copyright protected by law in respect of such drawings, designs, models or specifications or any goods made
or supplied by the Seller in compliance therewith.
10. Breach
If Buyer shall default in or commit any breach of any of its obligations to Seller or if any distress or execution
shall be levied on any of Buyer’s property or if Buyer shall make or offer to make any arrangement or
composition with creditors or commit any act of bankruptcy, or if Buyer is a limited company and any
resolution or petition to wind-up its business is presented or passed or a receiver appointed of such company’s
undertaking, property or assets or any part thereof, then Seller shall be entitled forthwith to terminate any
order from Buyer then subsisting and on written notice of such termination being posted by it to Buyer’s last
known address and any and every subsisting order shall be deemed to have been terminated without
prejudice to any claim or right which Seller might otherwise make or exercise.
11. Site Work
Where Seller or subcontractor of Seller is involved in delivery of goods to a site, in site work, and/or permanent
fixing of goods Special Extra Conditions shall apply, copies of which are obtainable on request.
12. Governing Law
These conditions and all quotations, offers and acceptances shall be construed according to English Law.
Company Name:
Company Name:
Address:
Address:
County:
County:
Post Code:
Post Code:
Telephone:
Telephone:
Fax:
Fax:
Please remember to include a sample of company letter headed paper. All goods and services provided
by Lyte must be paid within 30 days after the end of the month in which the invoice was issued.
Signature:
Date:
Print Name:
Position:
Internal Use Only
A/C Number:
Signed:
Credit Limit:
Date:
✁
54
Trade References
55
Certificate
No. FM25962
Lyte Industries (Wales) Ltd.
Wind Road, Ystradgynlais, Swansea, Powys, UK SA9 1AF
Tel: 01639 846800 Fax: 01639 841541 email: [email protected]
4912-L1008
Dealer stamp

Lyte Ladders Catalogue

Transcription

Similar documents

Introducing the Levelok® Ladder Dolly

Introduction to Fire Service Ladders

Title: Make a scrap card DNA model

Library Ladder Estimate Form seciohC reddaL ekaM .1

xtend GB senza prezzi

MiPOD How to use - Pop Up Products Limited

Putnam Ladder Form2.indd