Science and Research at Kazan State Technical University Olga

Transcription

Science and Research at Kazan State
Technical University
named after A.N. TUPOLEV
Scientific & Academic Facilities
Educational Institutes – 7
Departments – 82
Scientific Research Laboratories - 57
Technical Research Centres- 10
Branch Institutes - 10
Teaching and Research Staff Total – 3000
Full Professors and D.Sc. Degree Holders – 178
Associate Professors and Ph.D. Degree Holders - 680
Members of the Academy of Sciences- 34
Total Number of Students - 24 000
Licensed B/M/PhD/D Programmes - 93
List of Academic Programs of Higher Education
• Heat-Power Engineering and Heating
Engineering
• Electric Power and Electric Engineering
• Power Machinery Engineering
• Material Engineering and Material
Technology
• Machinery Engineering
• Design and Technological Support for
Machinery Production
• Nanoengineering
• Aircraft Engineering
• Aircraft and Helicopter Engineering
• Technical Exploitation of Flying Vehicles
and Engines
• Naval Engineering, Ocean Engineering
and Systems Engineering of Marine
Infrastructure Facilities
• Ground Transport Technology Complexes
• Exploitation of Transport and
Technological Machines and Complexes
• Instrument Engineering
• Optical Engineering
• Biotechnical Systems and Technologies
• Electronics and Nanoelectronics
• Radio Engineering
• Info-communication Technologies and
Communication systems
• Design and Technology of Electronic
Instrumentation
• Management in Engineering Systems
• Quality Management
• Standardization and Metrology
• Applied Physics
• Informatics and Computer Engineering
• Information Systems and Technology
• Applied Informatics
• Software Engineering
• Technosphere Safety
• Economics
• Enterprise & Personnel Management
ACADEMIC STRUCTURE of the UNIVERSITY
INSTITUTE of AVIATION, LAND VEHICLES and ENERGETICS
DEPARTMENTS:
1. Industrial Ecology
2. Information Technologies in Machinery
3. Innovational Management
4. Machinery Technology & Production
Organization
5. Materials Science & Technology
6. Special Engines
7. Strength of Materials
8. Theoretical Fundamentals of Heat
Engineering
9. Turbo-Machines
10. Air & Hydro-Dynamics
11. Aircraft Design and Construction
12. Aircraft Engines & Power Plants
13. Aircraft Production
14. Aircraft Structural Mechanics
15. Automobile Engines & Service
16. Automobiles & Fleet
17. Descriptive Geometry & Machinery
Drawing
18. Engines Production Technology
19. Fundamentals of Machinery Design
INSTITUTE of AUTOMATION &
ELECTRONIC INSTRUMENT-MAKING
DEPARTMENTS:
1.
2.
3.
4.
5.
6.
Instruments and Information & Measuring Systems
Opto-Electronic Systems
Standardization, Certification & Technological Management
Automation & Control
Electrical Equipment
General Chemistry & Ecology
INSTITUTE of TECHNICAL CYBERNETICS and INFORMATICS
DEPARTMENTS:
1. Applied Mathematics & Informatics
2. Automated Information Processing Systems & Control
3. Computer Hardware Design & Manufacturing
4. Computer Systems
5. Information Security
6. College of Information Technology
INSTITUTE of RADIO-ENGINEERING and TELECOMMUNICATIONS
DEPARTMENTS:
1. Design & Manufacturing of Microelectronic Equipment
2. Radio-Engineering & Industrial Management
3. Radio-Electronic & Quantum Instruments
4. Radio-Engineering & Telecommunication Systems
5. Radio-Engineering Systems & Information Technologies
6. Radio-Electronic Equipment Technology
7. Television & Multimedia Systems
8. Electronic Instrument-Making
ENGINEERING and ECONOMICS INSTITUTE
DEPARTMENTS:
1. Economics of Enterprise
2. Process dynamics and control
3. Industrial Commerce & Marketing
4. Management
5. Industrial and environmental safety
INSTITUTE of SOCIAL TECHNOLOGIES
DEPARTMENTS:
1. Athletics & Sports
2. Foreign Languages
3. History & Public Relations
4. Philosophy
5. Political Science & Management
6. Pedagogy of higher education
INSTITUTE of BUSINESS and INNOVATIVE TECHNOLOGIES
DEPARTMENTS:
1. Eastern & European / Russian & Tatar Languages
2. Economic Theory
3. National economic law
4. Civil & labor law
5. Constitutional & International Law
6. Engineering psychology, pedagogy, & human resource management
PHYSICS and MATHEMATICS FACULTY
DEPARTMENTS:
1. General Physics
2. Higher Mathematics
3. Technical Physics
4. Theoretical & Applied Mechanics
5. Special Mathematics
Material & Technical Facilities
Numerical Analysis & Computer Modeling Center
Center is doing works for: JSC KAMAZ, JSC KMPO, KER-Holding Co. Ltd., Federal State-Owened Enterprise «SSRICP»,
JSC «SDTB RADIO-EQUIPMENT», Joint Institute for High Temperatures of the Russian Academy of Sciences, Kazan Scientific
Centers of the RAS, Ministry of Energy of the Republic of Tatarstan Etc.
Main performed works:
- Design of power efficient
multimode ventilating & heating
system of cabins
- Optimization of cooling systems
by-pass for KAMAZ engine
- Computation of external vehicle
aerodynamics of KAMAZ 5490
KNRTU-KAI has commercial
Licensed Software:
Ansys, Unigraphics NX,
Team Center, Pro E,
Catia, ProCast Etc.
Physics and
chemistry of
composites
Design of construction and rigging
Technological
processes
Research
Centre of
Composite
Technologies
Impact tests
Multylayered
construction
Static tests
Acoustic research
Research Centre of Composite Technologies
•
•
•
•
•
•
Optimization of technological processes of autoclave and transfer molding of composite
products
Development of special manufacturing equipment for production of parts from polymer
composite by folding.
Development of manufacturing technique of folded fillers of aircraft and integral
constructions of composite panels.
Research of static strength and impact resistance of composite constructions.
Determination of physicochemical properties of composites and development of thermalresistant binders
Design of stockpile rigging and special-purpose equipment
Purpose: carrying out R&D in the field of development of composite
technologies for enterprises of transport machine building
Principle of Operation
Full design of product, technological process and manufacturing of products from
polymer composite in cyberspace using modern bundled software and research
and processing equipment
Robustness Testing Laboratory of KNRTU-KAI
(accredited by Aviation Register of Interstate Aviation Committee)
Tested products:
Aircrafts
Aircraft components
Structural
Elements
Materials
and
Test modes:
-
Static Tests Repeatedly Static
Life, Fatigue and Vitality Tests
Tribotechnical Tests
Environmental Tests
Laboratory provides certification
and serial maintenance of JSC Kazan
Helicopters helicopter equipment
More than 80% of all certification
tests
of
ANSAT
helicopter
construction, units and devices are
made here
The Remote Centre of Automatic Training Laboratory
(National Instruments)
The Center’s main goals are:
• Building and implementation of
new technologies to the training
process
National Instruments
(NI);
• Organization
of
extended
professional programs of using
new technologies NI;
•Organization
of
work-shops,
seminars,
conferences
on
implementing
of
new
technologies, NI.
The structure of remote
management of training and
scientific experiments
AERODYNAMICS LABORATORY
The laboratory exists more than 60 ys, both wind tunnels are in
workable condition and have required certificates.
Available complex of equipment and implemented automation system
provides speeding-up process of carrying tests, computing and
processing of information more than 6 times.
Wind tunnels of KNRTU-KAI are well recognized as etalon in the system,
of State Committee of the RF for standartization, metrology and
certification
Main results of joint work
university & industry
JSC Kazan Helicopters
Ansat - light multipurpose helicopter.
The design bureau of "Kazan Helicopter Plant" first helicopter prototype
was assembled in May 1997 year.
Helicopter "Ansat" can transport 1300 kilograms of payload into the cockpit.
Ansat helicopter has high performance characteristics.
AIRBUS
Design and modeling of folded structures, production processes
Ltd. "MVEN"
A joint project of the University and Ltd. "MVEN“.
Four-seater with a laminar wing.
Supported Corporation "RusNano"
JSC "KAMAZ"
Development and implementation of SEC JSC "KAMAZ“ modern design
Techniques, parts and components of cars and engines using computer
technology.
Branch “Vostok”, Chistopol
Branch was founded in 1987 to train engineering and technical personnel
List of Training courses
1. Instrument-making
2. Computer science & Computer engineering
3. Economics of Enterprise
4. Management
5. Environment protection
ACADEMIC STRUCTURE of the BRANCH
“VOSTOK”
DEPARTMENTS:
1. Instrument-making
2. Economics & Management
3. Computer & Telecommunication systems
4. Natural Sciences
5. Social sciences & Humanities
Strategic Partner Enterprises
• STC «Vostok» - Development and production of precision
mechanics and electronics
•PKF «Betar» - Development and production of energy
accounting
•ZAO «Vector» - Designing and building the satellite
communication systems, security systems and navigation
systems
•Ltd. «Vostok-Amphibian» - Issue components for cars
«VAZ»
•JSC Chistopol plant «Аutomotive special equipment»manufacture of general industrial equipment, consumer
goods
•PF Company «Continental RUS automats» - Production of
automotive components
Main directions of research and development
Control systems
Structural solidity
Technical objects control
IT security
Electronic paramagnetic resonance
Energetic
Technical vision
Technical Diagnostics
Strength of structures
Telecommunications networks
Wavelet transform
Theory of human capital
Evaluation of management systems
Business Planning and Entrepreneurship
Student success
Thank you for attention!

Science and Research at Kazan State Technical University Olga

Transcription

Similar documents