Specification - Delany Products

S
439
pecification: Polished chrome
plated flush valve, diaphragm type,
externally adjustable for water conservation, with 1” capped screwdriver
angle stop with back-check, renewable
main valve seat, metal “Rubberflex”
oscillating handle, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, vacuum breaker, wall
flange, spud nut for 11⁄2” top spud.
Variations
□ -3 – Water saver equipment
□ C – 3” Oscillating disc
□ D – Bumper on valve
(for seat with cover)
□ G – Bumper on angle stop
(for seat without cover)
□L
– Handle or push-button on front
of valve
□ T6 – Heavy cast wall flange with allen
head set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T36 – Solid ring wall support for
flush connection
□ T42 – Sweat adapter kit for stop
□ T46 – Split ring wall support for
flush connection
□
□
Remarks
Recommended For: Heavy duty installations where abuse of equipment is expected but it is
impractical to conceal valves behind wall.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F1
S
441
pecification: Polished chrome
plated flush valve, diaphragm type,
externally adjustable for water conservation, with 1” capped screwdriver
angle stop with back-check, renewable
main valve seat, metal “Rubberflex”
oscillating handle, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, vacuum breaker, wall
flange, spud nut and spud flange for
11⁄2” top spud.
Variations
□ -3 – Water saver equipment
□ C – 3” Oscillating disc
□ D – Bumper on valve
(for seat with cover)
□ G – Bumper on angle stop
(for seat without cover)
□ L – Handle or push-button on front
of valve
□ T6 – Heavy cast wall flange with allen
head set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T36 – Solid ring wall support for
flush connection
□ T42 – Sweat adapter kit for stop
□ T46 – Split ring wall support for
flush connection
□
□
Remarks
Recommended For: Heavy duty installations where abuse of equipment is expected but it is
impractical to conceal valves behind wall.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F2
S
465
pecification: Presto rough brass
flush valve, diaphragm type, externally
adjustable for water conservation, with
1” wheel handle angle stop with backcheck, renewable main valve seat,
metal “Rubberflex” oscillating handle,
“Turn-to-Silence” equipment, with
“Kwikfit” threaded union tailpiece,
vacuum breaker, spud nut. Parts No. 36
and No. 224 are in polished chrome.
Variations
□ A – Screwdriver operated stop
□ T7 – Handle in nickel-silver
□ T8 – Sweat inlet stop
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□
□
Remarks
Recommended For: Heavy duty installations where abuse of equipment is expected but it is
impractical to conceal valves behind wall. Valve is readily serviced by removing security cover.
Delany is only diaphragm type valve currently available that will rough into limited space provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F3
S
529-1.6
“L.C.” LOW CONSUMPTION
FLUSH VALVE (1.6 GALS. PER FLUSH)
pecification: Concealed rough
brass flush valve, diaphragm type, 1.6
gallons per flush, externally adjustable
for water conservation, with 1” wheel
handle angle stop with back-check,
renewable main valve seat, metal
“Rubberflex” push-button through
wall, wall flange, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, twin body openings
for roughing left or right, vacuum
breaker, elbow flush connection for
11⁄2” concealed back spud. All exposed
parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
Remarks
✽ For use with 1.6 gallon
low consumption water
closet
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F4
S
529
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle stop
with back-check, renewable main valve
seat, metal “Rubberflex” push-button
through wall, wall flange, “Turn-toSilence” equipment, with “Kwikfit”
threaded union tailpiece, twin body
openings for roughing left or right,
vacuum breaker, elbow flush connection for 11⁄2” concealed back spud. All
exposed parts polished chrome.
Variations
□ -3 – Water saver equipment
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T48—Valve for use with an access box
□ Y – 1” Straight stop
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F5
S
540-1.6
“L.C.” LOW CONSUMPTION
FLUSH VALVE (1.6 GALS. PER FLUSH)
pecification: Concealed rough
brass flush valve, diaphragm type,
1.6 gallons per flush, externally
adjustable for water conservation,
with 1” wheel handle angle stop with
back-check, renewable main valve
seat, metal “Rubberflex” push-button
through wall, wall flange, “Turn-toSilence” equipment, with “Kwikfit”
threaded union tailpiece, twin body
openings for roughing left or right,
vacuum breaker, elbow flush connection
for 11⁄2” concealed back spud. All
exposed parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
Remarks
✽ For use with 1.6 gallon
low consumption water
closet
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F6
S
540
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle stop
with back-check, renewable main valve
seat, metal “Rubberflex” push-button
through wall, wall flange, “Turn-toSilence” equipment, with “Kwikfit”
threaded union tailpiece, twin body
openings for roughing left or right,
vacuum breaker, elbow flush connection
for 11⁄2” concealed back spud. All
exposed parts polished chrome.
Variations
□ -3 – Water saver equipment
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F7
S
448
pecification: Polished chrome
plated flush valve, diaphragm type,
externally adjustable for water conservation, with 1” capped screwdriver
angle stop with back-check, renewable
main valve seat, metal “Rubberflex”
oscillating handle, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, vacuum breaker, wall
flange, spud nut for 11⁄2” top spud.
Variations
□ -3 – Water saver equipment
□ C – 3” Oscillating disc
□ L – Handle or push-button on front
of valve
□ T6 – Heavy cast wall flange with allen
head set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T36 – Solid ring wall support for
flush connection
□ T42 – Sweat adapter kit for stop
□ T46 – Split ring wall support for
flush connection
□
□
Remarks
Recommended For: Heavy duty installations where abuse of equipment is expected but it is
impractical to conceal valves behind wall.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F8
S
575-1
“L.C.” LOW CONSUMPTION
FLUSH VALVE (1.0 GALS. PER FLUSH)
pecification: Polished chrome
plated flush valve, diaphragm type,
1.0 gallons per flush, externally
adjustable for water conservation,
with 3⁄4”capped screwdriver angle with
back-check, renewable main valve
seat, metal “Rubberflex” oscillating
handle, “Turn-to-Silence” equipment,
with “Kwikfit” threaded union tailpiece,
vacuum breaker, wall flange, spud nut
and spud flange for 3⁄4” top spud.
Variations
□ C – 3” Oscillating disc
□ L – Handle or push-button on front
of valve
□ T6 – Heavy cast wall flange with allen
head set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T28 – Oscillating handle
□ T36 – Solid ring wall support for
flush connection
□ T42 – Sweat adapter kit for stop
Remarks
✽ For use with 1.0 gallon
low consumption urinals
Recommended For: Heavy duty installations where abuse of equipment is expected but it is
impractical to conceal valves behind wall.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F9
S
575
pecification: Polished chrome
plated flush valve, diaphragm type,
externally adjustable for water conservation, with 3⁄4”capped screwdriver
angle with back-check, renewable
main valve seat, metal “Rubberflex”
oscillating handle, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, vacuum breaker, wall
flange, spud nut and spud flange for
3
⁄4” top spud.
Variations
□ C – 3” Oscillating disc
□ L – Handle or push-button on front
of valve
□ T6 – Heavy cast wall flange with allen
head set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T28 – Oscillating handle
□ T36 – Solid ring wall support for
flush connection
□ T42 – Sweat adapter kit for stop
□
□
Remarks
Recommended For: Heavy duty installations where abuse of equipment is expected but it is
impractical to conceal valves behind wall.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F10
S
547
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall, wall flange,
“Turn-to-Silence” equipment, with
“Kwikfit” threaded union tailpiece,
twin body openings for roughing left
or right, vacuum breaker, elbow flush
connection for 11⁄2” concealed back
spud. All exposed parts polished
chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
Remarks
Recommended For: Penal or heavy duty installations where vandalism and abuse are common.
No part of valves can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F11
S
576-1
“L.C.” LOW CONSUMPTION
FLUSH VALVE (1.0 GALS. PER FLUSH)
pecification: Concealed rough
brass flush valve, diaphragm type,
1.0 gallons per flush, externally
adjustable for water conservation,
with 3⁄4”wheel handle angle stop with
back-check, renewable main valve
seat, metal “Rubberflex” push-button
through wall, wall flange, “Turn-toSilence” equipment, with “Kwikfit”
threaded union tailpiece, twin body
openings for roughing left or right,
vacuum breaker, elbow flush connection
for 3⁄4” concealed back spud. All
exposed parts polished chrome.
Variations
□ B – 1⁄2” Push-button
□ C – 3” Oscillating disc
□ T6 – Heavy cast wall flange with allen
head set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T27 – 3⁄4” Straight stop
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
Remarks
✽ For use with 1.0 gallon
low consumption urinals
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F12
S
576
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 3⁄4”wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall, wall flange,
“Turn-to-Silence” equipment, with
“Kwikfit” threaded union tailpiece,
twin body openings for roughing left
or right, vacuum breaker, elbow flush
connection for 3⁄4” concealed back spud.
All exposed parts polished chrome.
Variations
□ B – 1⁄2” Push-button
□ C – 3” Oscillating disc
□ T6 – Heavy cast wall flange with allen
head set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T27 – 3⁄4” Straight stop
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
□
□
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F13
S
623-1.6
“L.C.” LOW CONSUMPTION
FLUSH VALVE (1.6 GALS. PER FLUSH)
pecification: Concealed rough
brass flush valve, diaphragm type,
1.6 gallons per flush, externally
adjustable for water conservation, with
1” wheel handle angle stop with backcheck, renewable main valve seat,
metal “Rubberflex” push-button
through wall and fixture back splash,
back splash flange, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, twin body openings
for roughing left or right, vacuum
breaker, elbow flush connection for
11⁄2” concealed back spud. All exposed
parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
Remarks
✽ For use with 1.6 gallon
low consumption water
closet
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F14
S
623
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall and fixture back
splash, back splash flange, “Turn-toSilence” equipment, with “Kwikfit”
threaded union tailpiece, twin body
openings for roughing left or right,
vacuum breaker, elbow flush connection
for 11⁄2” concealed back spud. All
exposed parts polished chrome.
Variations
□ -3 – Water saver equipment
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F15
S
424
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall and fixture back
splash, back splash flange, “Turn-toSilence” equipment, with “Kwikfit”
threaded union tailpiece, vacuum
breaker, elbow flush connection for
11⁄2” concealed back spud. All exposed
parts polished chrome.
Variations
□ -3 – Water saver equipment
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No part of valves can be removed from front of wall. Access for future service of valve and
vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F16
S
424-2V
pecification: Two valve
combination consisting of a water
closet valve and one cold (or hot)
water lavatory valve. All valves are
concealed rough brass flush valves,
diaphragm type, externally adjustable
for water conservation, renewable
main valve seat, metal “Rubberflex”
push-button through wall and/or
fixture back splash, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece. Water closet valve has
1” wheel handle angle stop with backcheck, vacuum breaker, elbow flush
connection for 11⁄2” concealed back
spud. Lavatory valve has 1⁄2” wheel
handle angle stop, 1⁄2” I.P. flush connection to spout with 0.5gpm flow control.
All exposed parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□S
– 3⁄4” Angle stop
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T27 – 3⁄4” Straight stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Penal installations where vandalism and abuse are common. Lavatory valve
provides substantial water savings through consistent metering, can be piped for cold water or
tempered water as desired. Matching cover assembly available for other lavatory punching as
optional variation. No part of valves can be removed from front of wall. Access for future repairs
must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F17
S
424-3V
pecification: Three valve
combination consisting of a water
closet valve and hot and cold lavatory
valve combination. All valves are
concealed rough brass flush valves,
diaphragm type, externally adjustable
for water conservation, renewable
main valve seat, metal “Rubberflex”
push-button through wall and/or
fixture back splash, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece. Water closet valve has
1” wheel handle angle stop with backcheck, vacuum breaker, elbow flush
connection for 11⁄2” concealed back
spud. Lavatory valves have 1⁄2” wheel
handle angle stop, 1⁄2” I.P. flush connection to spout with 0.5 gpm flow control.
All exposed parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□S
– 3⁄4” Angle stop
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T27 – 3⁄4” Straight stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
Lavatory valve provides substantial water savings through consistent metering. Usual practice is
to provide tempered water through one valve and cold water through the other. No part or valves
can be removed from front of wall. Access for future repairs must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F18
S
568
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall, wall flange,
“Turn-to-Silence” equipment, with
“Kwikfit” threaded union tailpiece,
twin body openings for roughing left or
right, vacuum breaker, elbow flush connection for 11⁄2” concealed back spud.
All exposed parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4”” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T43 – 4” Offset in No. 428A—221⁄2””
flush connection
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No parts of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F19
S
568-2V
pecification: Two valve
combination consisting of a water
closet valve and one cold (or hot)
lavatory valve. All valves are concealed rough brass flush valves,
diaphragm type, externally adjustable
for water conservation, renewable
main valve seat, metal “Rubberflex”
push-button through wall and/or fixture back splash, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, twin body openings
for roughing left or right. Water closet
valve has 1” wheel handle angle stop
with back-check, vacuum breaker,
elbow flush connection for 11⁄2” concealed back spud. Lavatory valve has
1
⁄2” wheelhandle angle stop, 1⁄2” I.P.
flush connection to spout. All exposed
parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□S
– 3⁄4” Angle stops
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Direct sweat inlet stop
□ T27 – 3⁄4” Straight stops
□ T37 – Non-syphon bypass
□ T39 – Matching faucet hole cover
assembly
□ T42 – Sweat Adapter kit for stop
□ T43 – 4” Offset in No. 428A—221⁄2”
flush connection
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
Lavatory valves provide substantial water savings through consistent metering, can be piped for
cold water or tempered water as desired. Matching cover assembly available for other lavatory
punching as optional variation. No part of valves can be removed from front of wall. Access for
future repairs must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F20
S
568-3V
pecification: Three valve
combination consisting of a water closet
valve and one hot and cold lavatory
valve combination. All valves are
concealed rough brass flush valves,
diaphragm type, externally adjustable
for water conservation, renewable main
valve seat, metal “Rubberflex” pushbutton through wall and/or fixture back
splash, “Turn-to-Silence” equipment,
with “Kwikfit” threaded union tailpiece.
Water closet valve has 1” wheel handle
angle stop with back-check, twin body
openings for roughing left and right,
vacuum breaker, elbow flush connection for 11⁄2” concealed back spud.
Lavatory valves have 1⁄2” wheel handle
angle stop, 1⁄2” I.P. flush connection to
spout. All exposed parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□S
– 3⁄4” Angle stops
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T27 – 3⁄4” Straight stops
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stops
□ T43 – 4” offset in No. 428A—221⁄2”
flush connection
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
Lavatory valves provide substantial water savings through consistent metering. Usual practice is
to provide tempered water through one valve and cold water through the other. No part of valves
can be removed from front of wall. Access for future repairs must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F21
S
901-1.6
“L.C.” LOW CONSUMPTION
FLUSH VALVE (1.6 GALS. PER FLUSH)
pecification: Concealed rough
brass flush valve, diaphragm type, 1.6
gallons per flush,externally adjustable
for water conservation, with 1” wheel
handle angle stop with back-check,
renewable main valve seat, metal
“Rubberflex” push-button through wall
and fixture back splash, back splash
flange, “Turn-to-Silence” equipment,
with “Kwikfit” threaded union tailpiece, twin body openings for roughing left or right, vacuum breaker,
elbow flush connection for 11⁄2” concealed back spud. All exposed parts
polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
Remarks
✽ For use with 1.6 gallon
low consumption water
closet
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No part of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F22
S
901
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall and fixture back
splash, back splash flange, “Turn-toSilence” equipment, with “Kwikfit”
threaded union tailpiece, twin body
openings for roughing left or right,
vacuum breaker, elbow flush connection for 11⁄2” concealed back spud. All
exposed parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Penal or heavier duty installations where vandalism and abuse are common.
No part of valve can be removed from front face of wall. Access to rear of wall for future service
of valve and vacuum breaker must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F23
S
622
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1⁄2” wheel handle angle
stop, renewable main valve seat, metal
“Rubberflex” push-button through
wall and/or fixture back splash, wall
flange, with “Kwikfit” threaded union
tailpiece, 1⁄2” I.P. flush connection to
expansion washer spout connection.
All exposed parts polished chrome.
Variations
□ T8 – Sweat inlet stop
□ T27 – 3⁄4” Straight stop
□ T28 – Oscillating handle
□ T42 – Sweat adapter kit for stop
Remarks
Recommended For: Heaviest duty installations where consistent metering of water is necessary
or merely desirable. Combines the long service life of flush valves with tremendous water savings
over a period of time. No part of valve can be removed from face of wall. Access for future repairs
must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F24
S
622-2V
pecification: Two valve
combination as follows: concealed
rough brass flush valve, diaphragm
type, externally adjustable for water
conservation, with 1⁄2” wheel handle
angle stop, renewable main valve seat,
metal “Rubberflex” push-button
through wall and/or fixture back
splash, wall flange, with “Kwikfit”
threaded union tailpiece, 1⁄2” flush
connection to expansion washer spout
connection. All exposed parts polished
chrome.
Variations
□ T8 – Sweat inlet stop
□ T27 – 3⁄4” Straight stop
□ T28 – Oscillating handle
□ T42 – Sweat adapter kit for stop
Remarks
Recommended For: Heaviest duty installations where consistent metering of water is necessary
or merely desirable. Usual practice is to provide tempered water through one valve and cold water
through the other. Long service life can be expected together with substantial water savings. No
part of valve can be removed from front face of wall. Access for future repairs must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F25
S
666
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1⁄2” wheel handle angle
stop, renewable main valve seat, metal
“Rubberflex” push-button through
wall and fixture back spash, back
spash flange, with “Kwikfit” threaded
union tailpiece, twin body openings
for roughing left or right, 1⁄2” I.P. flush
connection to spout with 0.5gpm flow
control. All exposed parts polished
chrome.
Variations
□ A – Screwdriver operated stop
□S
– 3⁄4” Angle stop
□ T7 – Push-button in nickel-silver
□ T8 – Sweat inlet stop
□ T27 – 3⁄4” Straight stop
□ T37 – Non-syphon bypass
□ T39 – Matching faucet hole cover assembly
□
□
Remarks
Recommended For: Heaviest duty installations where consistent metering of water is necessary
or merely desirable. Combines the long service life of flush valves with tremendous water savings
over a period of time. No part of valve can be removed from front face of wall. Access for future
repairs mush be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F26
S
666-2V
pecification: Two valve
combination as follows: concealed
rough brass flush valve, diaphragm
type, externally adjustable for water
conservation, with 1⁄2” wheel handle
angle stop, renewable main valve seat,
metal “Rubberflex” push-button
through wall and fixture back splash,
back splash flange, with “Kwikfit”
threaded union tailpiece, 1⁄2” I.P. flush
connection to spout with 0.5gpm flow
control. All exposed parts polished
chrome.
Variations
□ A – Screwdriver operated stop
□S
– 3⁄4” Angle stops
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stops
□ T27 – 3⁄4” Straight stop
□ T37 – Non-syphon bypass
□
□
Remarks
Recommended For: Heaviest duty installations where consistent metering of water is necessary
or merely desirable. Usual practice is to provide tempered water through one valve and cold water
through the other. Long service life can be expected together with substantial water savings. No
part of valve can be removed from front face of wall. Access for future repairs must be provided..
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F27
S
569
pecification: Concealed rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 3⁄4” wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall, wall flange,
“Turn-to-Silence” equipment, with
“Kwikfit” threaded union tailpiece,
twin body openings for roughing left
or right, 1⁄2” female I.P. union outlet
(no flush connection). All exposed
parts polished chrome.
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T27 – 3⁄4” Straight stop
□ T28 – Oscillating handle
□ T32 – 3⁄4” I.P. female union outlet
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
□
□
Remarks
Recommended For: Heavy duty installations where vandalism is to be expected and water
wastage is commonplace. Usual practice is to supply tempered water through all flush valves in a
shower room except for one or two near door which are piped for cold water rinse. Metered flush
can effect tremendous savings in water consumption. Flushing cycles up to 40 seconds provide
ample time for soaping up and rinsing down. No parts of valve can be removed from front of wall.
Access for future repairs must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F28
S
538
pecification: Concealed
rough
brass flush valve, diaphragm type,
externally adjustable for water conservation, with 1” wheel handle angle
stop with back-check, renewable main
valve seat, metal “Rubberflex” pushbutton through wall, wall flange,
“Turn-to-Silence” equipment, with
“Kwikfit” threaded union tailpiece,
twin body openings for roughing left
or right, vacuum breaker with 1” female
I.P. union outlet. All exposed parts
polished chrome
FOR FLUSHING RIM FLOOR DRAIN
Variations
□ A – Screwdriver operated stop
□ C – 3” Oscillating disc
□ M – 11⁄4” Female I.P. union outlet
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T32 – 3⁄4” Female I.P. union outlet
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ T48 – Valve for use with an access box
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Facilities for disturbed inmates who are unwilling or unable to care for their
own needs. No parts of valve can be removed from front face of wall. Push-button may be located
as shown or rotated 180˚ for operation by attendant through wall of non-security area. In either
case access to valve and vacuum breaker for future service must be provided.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F29
S
670
pecification: Polished
chrome
plated flush valve, diaphragm type,
externally adjustable for water conservation, with 1” capped screwdriver
angle stop with back-check, renewable
main valve seat, metal “Rubberflex”
1
⁄2” push-button, “Turn-to-Silence”
equipment, with “Kwikfit” threaded
union tailpiece, vacuum breaker with
1” female I.P. union outlet, and extra
wall flange.
FOR FLUSHING RIM FLOOR DRAIN
Variations
□ C – 3” Oscillating disc
□ R – Wheel handle operated stop
□ T6 – Heavy cast wall flange with
set screw
□ T7 – Nickel-silver handle, push-button,
or oscillating disc, as applicable
□ T8 – Sweat inlet stop
□ T28 – Oscillating handle
□ T37 – Non-syphon bypass
□ T42 – Sweat adapter kit for stop
□ Y – 1” Straight stop
□
□
Remarks
Recommended For: Institutional facilities where it is not desirable or practical to conceal valve
behind the wall. Piping to and from flush valve should be anchored inside wall for extra rigidity.
Small push button minimizes possibly dangerous protrusions.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F30
K
988
wik-Entry access panel and
frame assembly, with 11⁄2” hole drilled
in center of panel. Does not include
push-button assembly or flush valve.
988-1
Kwik-Entry access panel and frame
assembly, less hole drilling. Does not
include push button assembly or flush
valve.
Delany Kwik-Entry access panel
and frame assembly provides ready
accessibility to concealed flush valves for
maintenance purposes.
Access panel is thirteen gauge
stainless steel with brushed finish and
vandal proof screws. Frame assembly
slips into 12” x 12” cavity in wall and
allows ample room to swing wrenches
to dismantle flush valve. Wall flange
surrounding push-button is removed
by spanner wrench prior to removing
access panel. Ideal for locations where
pipe chases of sufficient size cannot be
provided. Neat, finished appearance.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F31
K
987
wik-Entry access panel and
frame assembly, with 11⁄2” hole drilled
in center of panel. Does not include
push-button assembly or flush valve.
987-1
Kwik-Entry access panel and frame
assembly, less hole drilling. Does not
include push button assembly or flush
valve.
Delany Kwik-Entry access panel
and frame assembly provides ready
accessibility to concealed flush valves
for maintenance purposes.
Access panel is thirteen gauge
stainless steel with brushed finish and
vandal proof screws. Frame assembly
slips into 131⁄8 x 171⁄8” cavity in wall
and allows ample room to swing
wrenches to dismantle flush valve.
Wall flange surrounding push-button
is removed by spanner wrench prior to
removing access panel. Ideal for
locations where pipe chases of
sufficient size cannot be provided.
Neat, finished appearance.
P.O. Box 411 • Charlottesville • VA • 22902 • USA
Phone: (434) 296-0166 • Fax (434) 977-3596
Email: [email protected]
Web: www.delanyproducts.com
©2009
F32