Basinette Travel Cot

Basinette Travel Cot
Instruction Manual
IMPORTANT KEEP FOR FUTURE REFERENCE
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT
2
Safety Warnings
Safety Warnings
Thank you for choosing Obaby. To ensure that your travel cot is used in accordance with
these instructions, please read them fully.
This travel cot conforms to BS EN 716 and is guaranteed for 6 months from the date
of purchase against manufacturing defects. If, however you have any problems please
contact your Obaby retailer from whom you purchased your product who will take
appropriate action.
Your child’s safety may be affected if you do not follow these instructions.
WARNING: A child’s safety is your responsibility
WARNING: Ensure that all locking devices are engaged before use
ROUTINE CARE & MAINTENANCE
- For cleaning, use only a mild detergent and warm water
- DO NOT USE BLEACH
- DO NOT USE any abrasive substances
- From time to time, check your travel cot for loose screws, worn parts, torn
material or stitching. Replace or adjust the parts as needed.
Due to constant updating and improvements, some components may occasionally differ slightly from
the images shown in these instructions. We reserve the rights to change the specifications of any
products without prior notice. If you need any assistance please contact your Obaby retailer from
whom you purchased your product who will take appropriate action.
WARNING: Only use on a stable, level surface
WARNING: It may be dangerous to leave your child unattended
Getting to know your Travel Cot
WARNING: The child should be clear of moving parts while making
adjustments or opening or folding the travel cot. Risk of serious
injury (entrapment, laceration or amputation) exists
Top bars
WARNING: Be aware of the risk of open fire and other sources of
strong heat, such as electric bar fires, gas fires, etc. in the near
vicinity of the cot
Mattress base
WARNING: Do not use the cot if any part is broken, torn or missing
and use only spare parts approved by the manufacturer
WARNING: Do not leave anything in the cot or place the cot close to
another product, which could provide a foothold or present a danger
of suffocation or strangulation, e.g. strings, blind/curtain cords, etc
WARNING: Do not use more than one mattress in the cot
• Do not use without the mattress/base fitted in position
• This travel cot requires regular maintenance by the user
• The lowest position is the safest and the base should always be used in that
position as soon as the baby is old enough to sit up. The basinette is suitable
for babies who cannot pull themselves up or sit unaided
• It is essential to remove the basinette fabric and support rods before the cot
is used in its lowest position
• Overloading, incorrect folding and the use of non approved accessories may
cause damage or break the travel cot
• This travel cot is intended to carry one child from birth and up to a maximum
weight of 15kg, discontinue use if your child is able to climb out
• When folded, store away from children
Release button
Basinette fabric
www.obaby.co.uk
3
www.obaby.co.uk
4
Setting up your Travel Cot
Folding your Travel Cot
5
“Click”
Lift
Lift
fig. 1
fig. 2
fig. 3
fig. 7
fig. 8
fig. 9
fig. 11
fig. 12
Press
Press
fig. 4
fig. 5
fig. 6
Unzip the storage bag and remove the travel cot (fig.1).
Unfasten the velcro tabs and remove the outer mattress then spread the feet apart
(fig.2).
Grasp the top bars, one at a time and lift up until they lock into place (fig.3), repeat for
all 4 sides.
Push down in the centre of the base until flat (fig.4).
Place the mattress base into the bottom of the cot, padded side upwards (fig.5).
fig. 10
& Lift
Release the velcro tabs on the underside of the travel cot and remove the mattress
(fig.7 & 8).
Using the pull tab in the centre of the base, lift the base of the travel cot until the sides
are slack (fig.9).
Whilst pushing the release buttons in the centre of each top bar, one at a time, gently lift
then lower the bars to release the side supports (fig.10 & 11), repeat for all 4 sides.
Gather the feet and sides together, then wrap the mattress around the outside and
secure using the velcro tabs (fig.12), place into the storage bag.
Thread the velcro tabs on the underside of the mattress through the holes in the base of
the travel cot and secure underneath the travel cot (fig.6).
WARNING: Ensure that all locking devices are engaged before use.
The child should be clear of moving parts while making adjustments or opening or
folding the travel cot. Risk of serious injury (entrapment, laceration or amputation)
exists.
www.obaby.co.uk
www.obaby.co.uk
Fitting your Basinette
6
Fitting your Basinette
7
Press
fig. 13
fig. 14
fig. 15
fig. 19
fig. 20
fig. 21
fig. 18
fig. 22
fig. 23
fig. 24
Press
fig. 16
fig. 17
Set up your Travel Cot following the instructions on page 4 as far as fig.4.
Guide the support rods into the pockets in the base of the basinette fabric (fig.19).
Losely lay the basinette fabric inside the Travel Cot. Push the clips onto the top bars of
the Travel Cot all the way around the edge, ensuring they are all secure (fig.13 & 14).
Slot the two corresponding support rod sections together, ensuring they are secure and in
a straight line (fig.20 & 21).
Lift the fabric over each corner as shown (fig.15 & 16).
Place the mattress base on top of the support rods (fig.22), push the mattress down to
ensure it is flat (fig.23 & 24).
Push the retaining clips onto the corner bars of the Travel Cot (fig 17 & 18).
WARNING: Ensure that all locking devices are engaged before use.
The child should be clear of moving parts while making adjustments or opening or
folding the travel cot. Risk of serious injury (entrapment, laceration or amputation)
exists.
www.obaby.co.uk
www.obaby.co.uk