Product Catalogue 2012 Schneider Optics, Inc.

Transcription

Product Catalogue 2012
2012
Schneider Optics, Inc.
7701 Haskell Avenue
Van Nuys, CA 91406
United States
Phone (818) 766-3715
Fax
(818) 505-9865
E-Mail [email protected]
Web www.schneideroptics.com
Exclusive U.S. Distributor of Chrosziel Products
Page 2
Content
__
For TV and Cine Production
MB 602
Studio MatteBox
6.6x6.6
MB 840
Production MatteBox
4x5.65 / 5.65x5.65
MB 805
Production MatteBox System
4x4
/ 4x5.65
MB 415
Wide Angle MatteBox
4x5.65 / 5x5.65
SD 412
Wide Angle SunShade
4x5.65 / 5x5.65
MB 456 Academy Compact MatteBox
4x5.65 / 5x5
System C2
Combi System
4x4
/ 4x5.65
SD 411
SunShade
4x4
Light-Weight-Supports (HD) for hand grips
®
Light-Weight-Supports, Carbon Fibre rods, VariTube telescopic rods
QuickLock, Sliding Camera Plates, Adaptors
Studio Rig follow-focus systems
Fluid Zoom Drives for Cine and Video lenses
Lens Supports
Cine-style Viewfinder for Sony HDVF-C30W(R) & HDVF-C35W (F23/35)
7701 Haskell Avenue ● Van Nuys, CA 91406 ● Ph: (818) 766-3715 ● Fax: (818) 505-9865
285 Oser Avenue ● Hauppauge, NY 11788 ● Ph: (631) 761-5000 ● Fax: (631) 761-5090
www.schneideroptics.com ● [email protected]
____ ___
page
6-7
8-9
10-11
12-13
14-15
16-17
18-19
20-21
22
23
24-25
26-27
28
29
30
_
Page 3
Content
For DV und HDTV Camcorder & 16mm Cine
MB 450
MB 450
MB 450
MatteBox product line
Selector Guide
Ready to use Kits
4x4 / 4x5.65
For Sony
PMW-EX1 / PMW-EX3 (dished-end plate) / PMW-EX3 Super Wide Angle 4x5.65
HDR-FX1 & HVR-Z1 / HVR-V1 / HVR-Z5 / PMW-F3 / NEX-FS100 and more
For Panasonic
HVX-200 & 200A / HPX171 & HMC151 / AG-AF100 / AG-3CA1 and more
For JVC
GY-HD100 & 101 / GY-HD200 & 251 / GY-HM700/750 / GY-HM100 and more
For Canon
XH G1/G1S & A1/A1S / XL HD1 & XL2 / XF-300/305 / EOS C300 and more
CMB-R10/20 SunShades
4x4 for 1/3” Video Chip
Selector Guide
CMB-R10/20 & camera / adaptor rings
SD 440
SunShade 4x4
for 16mm Cine, 1/2” & 1/3” Video Chip
SD 1001 SunShade 3x3
for 16mm Film/Cine, 1/2” & 1/3” Video Chip
Overview formats
and maximum wide angle coverage
Studio Rig DV / Photo
Follow Focus for DV, HDV Camcorder and HDSLR
®
HDV Rig VariLock / Photo Follow Focus for Autofocus Camcorder and HDSLR
Overview gear drives
and gear rings for HDV & DSLR lenses
®
Shoulder Braces DV Balancer / proVideo for Camcorder & HDSLR
___ _____
page
_
32-35
34
35
36-37
36
38
39
40
41
42
43
44-45
Page 4
Content
__
___ ___
General Information
page
__
Overview pages:
MatteBox Light Prevention Rings Rubber Bellows, Retaining-rings, Insert-rings
SunShade Clamp-Rings Step-down-rings, Adaptor-rings, Intermediate-rings
Filterholders
Accessories & Spare Parts
Lens Diameters
Video Fujinon, Canon, Angenieux, Cooke, Zeiss (HD)
Camcorder, Converter 1/3” (DV / HDV)
Cine lenses
Photo lenses for HDSLR
Remote Systems
Colibri
Wireless Remote Dimmer
DigiFOX
Wireless Remote Follow Focus New powered by 1.5 V battery
ALADIN MARK II S3D Wireless Remote Lens Control
Cables
for Wireless Systems
Lens Testing Equipment
54-55
56-57
58-59
60-61
page
63-64
65-66
67-71
69-71
page
Collimation
Projection
Mounts
MTF Star
72-73
74
75
76-77
UniversalCamCollimator, Autoreflex Collimator
Lens-Test-Projector LTP MK5
for collimation and projection (photo/cine/video)
MTF analysis with the click of a mouse, extension for the projector
46-47
48-51
52
53
__
__
Page 5
Products for TV- and Movie-Production
Page 6
MB 602 – Studio MatteBox for Movie and HD-Cine production
Production MatteBox with Swing-Away Design, complete set for
individual configuration with further accessories
Swing-Away-Design for quick and easy lens change. Use of two, three or four
filters combined with quick-lock filter stages. For bridge plates with 19 mm or
15 mm rods. Connecting diameters of 165 and 142.5 mm fit to Adaptors and
Rubber Bellows for all Prime and Zoom lenses of Movie- and HD-Cine cameras.
The set includes one large French Flag and adjustable side wings. The 1st filter
stage is not detachable and carries the quick-lock; the second compartment of
the set holds 3 filters in 2 stages; both stages rotate. The 2nd and the 3rd filter
can be precisely positioned by a toothed gear. The 3rd and the 4th filter are
located in one stage and can be moved against each other and rotated
together.
A flexible shaft and 4 filter holders are also part of the set.
Optionally a set of 4 masks is available to optimise shading for lenses with
longer focal length. For extreme wide angles, the MB602 is used with the
additional single filter stage, rotatable, and with geared positioning.
A further accessory for individual configuration is the double rotatable filter
stage.
Technical data:
Max. wide angle focus length F=mm
Format 16:9
Masks for F=mm
Max. filter number / rotating / gear positioned
Filter stage width (mm)
Filter size (inch)
Connecting diameter (mm)
Support system: bridge plate with rod ∅ mm
Height adjustment
S16 6 / S35 10 / still 16
SD 3.9/ HD 4.3
S35 and HD
8 / 12/ 20 / 40
4/3/2
177
6.6 x 6.6
165 & 142,5
15 or 19
±5 mm
Product catalogue 2012
Page 7
MB 602 – Studio MatteBox for Movie and HD-Cine Production
Components
MB 602 complete for bridge plates with 19 mm rods
MB 601 complete for bridge plates with 15 mm rods
Accessories
The following filter stages can be used instead of the
included filter stages:
Single Filter Stage 6.6 x 6.6, rotating, geared
Double Filter Stage 6.6 x 6.6, rotating, geared
Special accessories
Insert filter holder 5.65x5.65 use inside 6.6 x 6.6 filter holders
Insert filter holder 5 x 6 to use inside 6.6 x 6.6 filter holders
Insert filter holder multi format 4 x 4 / 4 x 5.65
to use inside 6.6 x 6.6 filter holder
Filter holder 6x6 without gear
Set of 4 Mattes, for 8, 12, 20 und 40 mm focal lengths
Spare part selection
Filter holder 6.6 x 6.6
Geared Filterholder 6.6 x 6.6
French Flag for MB 601 / 602
Set of Side Wings (without pivot mechanism)
Set of 2 pivot mechanisms to hold side wings
Flexible Shaft to operate geared filter holders
Intermediate Ring 165:142,5 mm
Connections ∅ 142,5 mm
Rubber Bellows 142,5 to 85mm (Fujinon HA10x5)
Rubber Bellows 142,5 to 95mm
(Fujinon A10x4.8, Canon J11x4.5)
Intermediate Ring 142,5 to 114 mm
Article
number
602-01
upon request
601-CF-W1
601-CF-W22
610-01-565
610-01-56
610-01-45
610-03
610-MA
610-01
610-02
610-09
610-10
610-PM
610-20
610-14
410-47
Connections to ∅ 142,5 mm
410-50
410-14F
410-57
410-13
410-11
410-12A
410-52
Please choose the insert ring for your respective lens
Intermediate Ring 142,5 to 128
Please choose support system for
mm
410-53
mm
410-49
mm
410-51
mm
410-54
your respective camera
Page 8
MB 840 - Production MatteBox for Cine and TV, compact and versatile
Production MatteBox with Swing-Away-Design, complete set
with Double Filter Stage for 2 rotating filters
Swing-Away-Design for quick and easy lens change. The quick-lock device
allows an easy change of the Double- against the Triple Filter Stage. The
swing-away bracket fits on Light Weight Supports with 15 mm rod diameter.
The connecting diameter is 142.5 mm. Light protection rings (and step down
rings respectively) are available for all prime and zoom lenses of film and SD /
HD TV-cameras.
The MatteBox comes with a large, foldable French Flag and 2 individually
rotating filter-stages. The filter-holders are equipped with multi-format
clamping. The first stage takes 4x5.65 vertical and 5.65x5.65 filter sizes, the
second 4x5.65 vertical, horizontal and 5x5.
Further options for individual use: The Triple Filter Stage (slightly limiting the
wide angle range to 5.2 mm), Side-Wings and bottom French Flag
Special Feature:
The Clamp Adapter (∅ 130 mm) replaces the Swing-Away Bracket and makes
the MatteBox a SunShade, the SD 840.
Special version for RED One available: For 19mm support system, double
rotating stage with 2 identical multiformat filterholders for 4x5.65”v/5x5”.
Usable max. wide angle is F=12mm. The Triple Stage is also an option.
Technical data:
Tool-free exchange of Clamp Adapter (∅ 130 mm) and
Swing-away Bracket
Multi Format 4:3 and 16:9
Mattes 4:3 for F=mm
Mattes 16:9 for F=mm
Filter size (inch)
Locking of the 1st rotating plate Mount Arm 840-24R
and the entire filter-stage
for rod - ∅ 19mm, included in
version MB 840 RED.
Light weight support for rod ∅ mm
* Through adaptors also bridge plates 15 und 19
S16 6 / S35 10 / still 16
SD 3.9 / HD 4.3
S16, 35, SD, HD
4.8/10/20/30/48
4.8/10/20/30/48
3/3/150
4x5.65v/5x5 +
4x5.65vh/5.65x5.65
142,5
15 *
mm
Page 9
MB 840 - Production MatteBox for Cine and TV, compact and versatile
Swivel Filter Stage
840-41S
MB 840-19
Complete package with 2
identical multiformat
filter holders (410-32)
4x5.56“ / 5x5“ and
mount for 19mm Ø rods.
Triple Filter Stage, all filters
rotate, 840-42
Components
Article no.
MB 840 MatteBox for 15mm support systems
840-01
SD 840 SunShade, clamp version
840-13
MB 840 complete, with additional Clamp Adapter
840-01/kit
MB 840-19, for 19mm support systems, with 2 filterholders 410-32
840-01R
multiformat 5x5” / 4x5.65”
Accessories
Clamp Adaptor with ∅ 130 mm
840-20
Swing-Away-Bracket
840-23
840-42
Triple Filter Stage, for triple rotation (without filter holder)
Swivel Filter Stage, double stage with dual rotation,
840-41S
1st filter ± 6° vertical swivelling (without filter holder)
Set of Side Wings
410-200
Set of Mattes 4:3
410-MA43
Set of Mattes 16:9
410-MA169
Adapter for 15:19, for bridge plate with 19 mm rods
401-17
Adapter for 15:15, for bridge plate with 15 mm rods
401-18
Adapter 15:19 QuickLock, plugs on 19 mm support rods
401-10Q
Pivot mechanism for Bottom French Flag
410-02-08
Please choose the support system according to the camera
and adaptor rings fitting the lens size
For Light Prevention Rings, Clamp Rings and Support Systems,
see the respective information pages.
Dual Filter Stage, for dual rotation
840-41
French Flag
410-30
Filter holder 4x5.65 vertical / 5.65x5.65
510-05
Filter holder 4x5.65 vertical and horizontal / 5x5
410-32
Pivot mechanism for Side Wings (Set of 2)
410-PM116
All filter holders for filter stages with 150mm, see filter holder summary.
Page 10
MB 805 - Production MatteBox for Cine and TV, versatile upgradeable, package for 19 mm
Production MatteBox with Swing-Away-Design, starter set with
Single Filter Stage
Swing-Away-Design for quick and easy lens change.
The built-in Single Filter Stage accommodates a further Single, Double or Triple
Filter Stage through a quick-lock. All further stages rotate. All 150mm filter holders
can be used. For use of the maximum angle of field*, we deliver and recommend
the following set:
The first fixed stage is equipped with a multi format filter holder for 4x4 and
4x5.650 filters. The additional single stage should be equipped with a 5x5 and
4x5.650 multi-format filter holder (FH 510-01). For the dual and triple-filter-stage,
we recommend the 4x4 and 4x5.650 multi-format filter holder (FH 410-31). The
swing-away bracket mounts on light weight supports with 15mm rods, or by means
of adaptors to bridge plates with 15 or 19 mm rods.
The connecting diameter is 142.5mm. Light prevention rings exist for all prime and
zoom lenses of film and SD/HD TV-camera.
A large foldable French Flag is part of the set.
Side Wings are optional. For maximum stray light reduction, sets of mattes in the
formats 4:3 and 16:9 are available.
A package for 19mm support is also available. Usable max. wide angle is F=9 /
10 / 12 / 18 mm depending on stages used.
Start Package MB 805
Complete
Package
MB 805-19
for 19 mm rods
and equipped
with 2 identical
multiformat
4x5.56” / 5x5”
filter holders
401-32.
Max. wide angle focal
length of other
formats, F=mm:
S16: 5 / 6 / 7 / 10
S35: 9 / 10 / 12 / 18
still: 15 / 17 / 20 / 29
SD: 3.6 / 4.1 / 4.8 / 7.2
Technical data:
Max. wide angle focus length 2/3“ HD Chip
3,9 / 4,3 / 5,1 / 7,7
other formats please see table on the left F=mm
S16, 35, SD, HD
Mattes 4:3 for F=mm
4,8 / 10 / 20 / 30 / 48
4,8 / 10 / 20 / 30 / 48
4/3/Filter stage width (mm)
150
Filter size (inch) 4x4 / 4x5.65h + 5x5 / 4x5.65h
142.5
15**
* * Through adapters also bridge plates 15 und 19 mm
Page 11
MB 805 - Production MatteBox for Cine and TV, versatile upgradeable.
Single, Double and
Triple Filter Stage,
for optimum
configuration of the
MB 805.
All stages are
rotatable and can
be selectively
attached to the first
stage.
Mount Arm 840-24R
for rod Ø 19mm. Is
part of the package
MB 805-19.
Components
MB 805 MatteBox start package, complete as described above
MB 805 MatteBox start package for 19 mm supports
Single-Filter-Stage, rotatable, Fmax=4,5mm (without filter-holder)
Double-Filter-Stage, rotatable , Fmax=5,2mm ( without filter-holder )
Triple-Filter-Stage, rotatable, Fmax=7,8mm ( without filter-holder )
MB 805-19 MatteBox Complete Package
nd
Double filter stage, 2 rotating, 2 filter holders (410-31 plus 510-01),
mount arm for 19mm Ø rods, Fmax=10mm (S35)
Accessories
Multi format filter holder 4x4 / 4x5.65 horizontal (recommended)
Multi format filterholder 5x5 / 4x5.65 horizontal ( recommended )
Swivel-Filter-Stage, single stage, rotatable, Fmax=5,2mm
( without filter-holder ) Filter ± 6° vertical pivoting
Pair of Side Wings
Set of mattes 4:3 (F = 4,8 / 10 / 20 / 30 / 48 mm)
Set of mattes 16:9 (F = 4,8 / 10 / 20 / 30 / 48 mm)
Pivot mechanism for bottom French Flag
French Flag (for bottom)
Mount Arm MB 840 / 805 for 19mm rods
Please choose support system according to the camera
and adaptor rings fitting the lens diameter
For Light Prevention Rings, Clamp Rings and Support Systems,
Swivel Filter Stage to
blank out reflexes
caused by luminaries
in the scene, e. g.
headlights of a car.
Article no.
805-02
805-02R
820-01
820-02
820-03
805-RED
410-31
510-01
820-05
410-200
410-MA43
410-MA169
410-02-08
410-30
840-24R
410-PM116
This Swing-Away-System may also be combined with the S16 Bellows-Housing.
For further information see pages referring to MB C2
Page 12
MB 415 - Wide Angle MatteBox, compact, for two filters up to 4.3mm focal length.
Production MatteBox for 15 mm support systems
Includes a Double Filter Stage for filters up to 5.65x5.65 and 5x6” vertical. Both
filters can be moved and fixed in any vertical positions, the second also rotates,
depending on the used filter 360 ° or up to 240º.
For optimum use of the picture angle, the first filter stage is equipped with a multi
format filter-holder for 4x4 and 4x5.65” filters, the second with multi format filterholder for 5x5 and 4x5.65” filters. Using 4x5.65” filters in the front stage and
5x5“ in the second, makes full use of the wide angle format for any position of the
rotating stage. For even more flexibility when using e.g. graduation filters, insert
5x6” filters in the first stage (filter-holder 510-02).
Special feature - a third stage inside the rubber bellows for round filters with
138mm of diameter. Not possible with 4,3/4.5mm zoom lenses, due to their front
ring position.
This MatteBox mounts on 15mm Lightweight Supports. The connecting diameter of
95mm fits the current wide angle zoom lenses. Choose also between two standard
versions for 100 and 110 mm connection of light protection rings.
The 39 cm wide French Flag is included in the standard package. Side-wings can
be used optionally.
For maximum stray light reduction, use mattes. Sets for 4:3 and 16:9 available.
Technical data:
S16 6 / S35 10 / still 16
SD 3.9 / HD 4.3
Multi-Format 4:3 and 16:9
S16, S35, SD, HD
Mattes 4:3 for F=mm
4,8/10/20/30/48
4,8/10/20/30/48
2+1 / 1 / Filter stage width (mm)
150
Filter size (inch) 4x4/4x5.65h + 5x5/4x5.65h
95 / 100 / 110
15**
* * Through adapters also bridge plates 15 und 19 mm
Page 13
MB 415 - Wide Angle MatteBox, compact, for two filters up to 4.3mm focal length.
Third filter-holder inside the
rubber bellows, for round filters
with ∅ 138mm (Do not use with
wide angle Zoom lenses with 95mm
front diameter).
Components
MB 415 MatteBox for wide-angle, complete as described above,
95mm end ring for Zooms
MB 415 MatteBox for wide-angle, complete, 100mm connection
MB 415 MatteBox for wide-angle, complete, 110mm connection
415-02F100
415-02F110
Accessories
Pair of Side Wings
Filter holder 5x6 vertikal
410-PM116
410-200
510-02
Set of Mattes 16:9 (F = 4,8 / 10 / 20 / 30 / 48 mm)
Set of Mattes 4:3 (F = 4,8 / 10 / 20 / 30 / 48 mm)
French Flag, 45cm, foldable (optional)
410-MA169
410-MA43
410-30
Article no.
415-02F
For Light Prevention Rings and Support Systems,
Mattes for further reduction
of stray light and reflections.
Available in 16:9/HD-cine/S35
and SD4:3 format.
MatteBox housing
French Flag, 39cm, foldable
Multi format filter holder 4x4 / 4x5.65 horizontal
(recommended)
(recommended)
CLWAH-F4.5-01
410-29
410-31
510-01
Page 14
SD 412 –Wide Angle Sunshade, for two filters up to 4.3mm focal length.
Clamp-on Sunshade in three versions.
The technical data of the three versions is identical except for the maximum
clamp diameters (104 / 110 / 130 mm).
The included Double Filter Stage takes filters up to 5.65x5.65“. Both filters slide
vertically and can be fixed in any position, the second also rotates 250°.
For optimal use of the picture angle, the filter-stages are equipped with multi
format filter-holders for 4x4 and 4x5.65” filters in the first stage and, in the
second, rotating multi format filter-holder for 5x5 and 4x5.65” formats. Insert
5x5“ filters and fully use the wide angle format in any position of the rotating
stage. For even more flexibility when using e.g. graduation filters, insert 5x6”
filters in the first stage (filter-holder 510-02).
The connecting diameter of 104 mm and the respective Step-Down Rings fit
most lenses. For the further two standard versions with 110 and 130mm
clamp-on diameter various Step-down rings are available.
The French Flag is included, Side Wings are optional.
For maximum stray light reduction, sets of mattes for 4:3 and 16:9 formats are
available.
Tip:
Check the correct positioning of the side wings when using super wide angle
lenses to avoid vignetting.
Technical data:
S16 6 / S35 10 / still 16
SD 3.9 / HD 4.3
S16, S35, SD, HD
4,8/10/20/30/48
Mattes 4:3 for F=mm
4,8/10/20/30/48
2/1/Max. filter number / rotating / gear positioned
150
Filter size (inch) 4x4/4x5.65h + 5x5/4x5.65h
104 / 110 / 130
Clamp adaptor *
Support system:
* With Center Bracket also usable on 15 mm rod support.
New improved material and carbon design of housing.
Page 15
SD 412 –Wide Angle Sunshade, for two filters up to 4.3mm focal length.
Components
SD 412 SunShade for wide-angle, complete as described above ,
104 mm connection
SD 412 SunShade for wide-angle, complete , 110mm connection
SD 412 SunShade for wide-angle, complete , 130mm connection
The Wide-angle SunShade is available with three
clamp systems. Select Step-down rings for the
respective lens diameters.
The Center Adaptor connects
the SD 412 with the Light-WeightSupport (not for ∅ 130 mm).
Article no.
412-02F
412-02F110
412-02F130
Accessories
Filter holder 5x6 vertical
510-02
Pair of Side Wings
Set of mattes 4:3 (F = 4,8 / 10 / 20 / 30 / 48 mm)
Set of mattes 16:9 (F = 4,8 / 10 / 20 / 30 / 48 mm)
Step Down Ring 104 to 95 mm (fits many video zoom lenses)
Step Down Ring 104 to 95 mm (fits many video prime lenses)
Center Adaptor**
410-PM116
410-200
410-MA43
410-MA169
411-28F
411-28
420-02
Please select support according to camera and light
protection or step down ring according to lens.
For information on light protection rings and on the various support
systems, see the respective overview pages.
French Flag 39 cm, foldable
MatteBox housing
** for use as supported MatteBox on 15mm Light-Weight-Supports.
410-31
510-01
410-29
CLWAH-F4.5-01
Page 16
MB 456 Academy - compact, three filters, up to 14mm focal length Academy format.
Production MatteBox for cameras with 16x22mm chip or film format. CarbonDesign, lightweight and impact resistant.
Lightweight and ultra compact, ideal for handheld shooting. But also no compromise
due to the Triple-Rotating-Filterstage, equipped with 3 equally sized multiformat filter
holders (510-01) 5x5” / 4x5.65”.
True 14mm MatteBox - By using 5x5 filters, two rotate unrestrictedly and the first one
can be rotated by 40°. The front stages (first and the second one respectively) are
automatically held in place when the next further back is rotated.
Special feature - This MatteBox mounts on 15mm Lightweight Supports and comes
with a SunShade function. Starting with the clamp size of 130mm Ø, many step-down
rings are available.
With the clamp to 110mm thread adaptor (411-67), the wide choice of 110mm light
prevention rings can be used. The intermediate ring 411-60 reduces the clamping
diameter for the 110mm step-down rings. The Flexi-Insertring 130 (411-68) is another
special light prevention ring which fits into the 130mm clamp adaptor and flexibly
covers lenses between 95 and 125mm diameter.
The 36 cm wide French Flag (402-26) is included in the standard package. Sidewings can be mounted optionally.
Another option is the DSW® 500 Adaptor* which adds the swing away feature to the
MatteBox 456 Academy.
Technical data:
MB 456 Academy Double
two filter stages,
to 12mm focal length.
Cine 35 & S35 -12mm, 135 - 20mm
1/3“HD – 2.6mm, 1/2“HD – 4mm,
2/3” HD 5.2mm.
Other specifications equal Triple version.
Mattes 4:3 for F=mm
Filter size (inch)
Through adapters also bridge plates 15 and 19 mm
35 & S35 14 | still 22
1/3”HD 3.1 | 2/3”HD 6.2
S16, S35, SD, HD
universal
3/3/150
5x5/4x5.65h
130 clamp-on
15
Page 17
MB 456 Academy - compact, available as Triple and Double version.
Components
MatteBox complete as described above
MB 456 Academy Triple
The new Carbon-Design, light weight
and impact resistant.
The MB 456 Academy
with rod adaptor and
SunShade function,
clamp-on Ø 130mm.
Step-Down-Ring 411-67 fits
into 130mm clamp adaptor and
offers 110mm thread for the
wide choice of light prevention
rings.
Article no.
456-30
456-20
Accessories
410-PM104
Pair of Side Wings
410-100
Flexi-Insertring 130 (MatteBox)
411-68
Step-Down-Ring clamp130:110 w. thread (MatteBox)
411-67
Intermediate ring 130:110 (SunShade Function)
411-60
With the above mentioned rings 411-67 and 411-60 all MatteBox light prevention
rings and SunShade step-down rings of the 110mm diameter can be used
DSW© 500 Adaptor, Direct Swing-Away System
401-503
Available step-down rings 130:95;98;105;110;114;117;117,4;120;125;128mm
For Light Prevention Rings and Support Systems,
©
DSW 500 Direct Swing-Away System
401-503, pan radius 100mm, for 15 mm
rod diameter.
Flexi-Insertring 130
411-68 covers lens
diameters between
95 and 125mm.
French Flag, 36cm, foldable
402-26
Pivot mechanism for (lower) French Flag
456-11-01
510-01
(standard)
416-03
Matte 16:9
Any filter holder with the width of 150mm may be used.
Please see: Overview – Filter holder.
Page 18
C2 MatteBox – Double Filter Stage 4 x 5.65”/4x4” and 3 housings to combine.
Choose the MatteBox housing depending on your application.
Any configuration mounts on the Double Filter Stage CF-MB/ST,
which includes a multi format filter holder (410-31) for 4x4“ and 4x5.65“ filters
in the first stage and, in the second, a rotating filter-holder (402-04) for 4x4“.
Both filters slide vertically and can be fixed in any position, the second also
rotates 240º.
The Rubber Bellows adapts to the 100 mm ∅ (resp. 110 mm, CF-MB/ST110).
The Step down Rings with 100/110 mm thread guarantee perfect fit to the lens.
Without Rubber Bellows, use ∅ 142.5 mm and the respective light protection
rings.
The CWAH-1FC housing is designed for lenses up to 5.2 mm focal length and
max. 4.5 mm, provided only the first filter is used with Insert-Ring 410-55,
100:95 mm. The set comes with the French Flag and the Insert Matte for 16:9.
Side-Wings and Bottom French Flag are optional.
Use the CBH-S16 housing with bellows and moving matte for the Super 16
/ 16:9 formats. French Flag and a set of Side Wings are included. The
maximum wide angle focal length is 5.2mm (referring to 2/3“HD).
The housing CWAH-FV has 16:9 / S16 format. It covers wide angle up to 5.2
mm focal length (S16=7, S35=12, SD=4.8) and is the most economic
combination. The French Flag is included. Optional side wings and bottom
French Flag can be added.
Technical data CF-MB combinations:
Max. wide angle focus length (2/3“ Chip) F=mm
The double filter stage CF-MB/ST is the basis for the
MatteBox combinations MB C2.
For fine adjustment the stage can be moved ± 3 mm horizontally.
Various light protection rings for 100 mm thread are available.
Mattes 4:3 for F=mm
Filter size (inch)
* With adaptors also bridge plates 15 und 19 mm
5.2 / 4.5 (s. o.)
1/2” HD = 4
S16, S35, SD, HD
s. o.
2/1/1. 150 / 2. 110
4x4/4x5.65h + 4x4
100 / 110 + 142,5
15 *
Page 19
C2 MatteBox – Double Filter Stage 4 x 5.65”/4x4” and 3 housings to combine.
The Standard Housing
CWAH-FV with French Flag.
The wide-anglehousing CWAH-1FC
with French Flag
and 16:9 matte.
Components
Standard Housing 16:9 / S16, F-Flag 410-29, as described
Wide Angle Housing, F-Flag 402-26, as described
Bellows Housing, F-Flag 410-29, (with moving matte held by bellows)
Double Filter Stage, rubber bellows 100 mm
Double Filter Stage, rubber bellows 110 mm
Accessories
Pair of Side Wings
Article no.
CWAH-FV
CWAH-1FC
CBH-S16
CF-MB/ST
CF-MB/ST110
Pivot mechanism for Side Wings (Set of 2 for CWAH-FV)
Accessories for Wide Angle Housing CWAH-1FC
Insert-Ring 100 : 95 mm, for use with one filter only, up to F=4.5 mm
Please select support according to camera and light protection
or step down ring according to lens.
Filter holder 4x4
(for Bellows-Housing CBH-S16 and Standard Housing CWAH-FW)
French Flag 36 cm, foldable (for Wide-Angle-Housing CWAH-1FC)
Pair of Side Wings
16:9 matte (for Wide Angle Housing CWAH-1FC)
Rubber Bellows with ring 100 / 110 mm
410-PM
CWAH-1FC
+410-11
The Bellows-Housing CBH-S16 for Super 16 and 16:9
CBH-S16 +410-100 + 410-13
410-100
410-PM104
410-55
410-31
402-04
410-29
410-26
410-100
416-03
410-13 / 11
Page 20
SD 411 – SunShade, for two 4x4” Filters up to 5.2 mm focal length.
Clamp-on SunShade for lens diameters up to 104 mm.
The Double Filter Stage takes 4x4” filters. Both filter holders slide vertically and
can be fixed in any position, the second also rotates 160º.
The housing is designed for a focal length of 5.2 mm. If used with only the first
fixed filter holder and in combination with the special step-down ring 411-31
(104 to 95 mm), shots up to 4.5 mm focal length are possible.
The connecting diameter of 104 mm and the respective step-down rings fit
many lenses.
The set comes with two filter holders, a French Flag and the 16:9 Matte.
Side Wings and bottom French Flag are optional.
The maximum wide angle focal lengths (F=mm) are: S16=5.5; S35=13;
photo35=20; SDTV=4.8; HD1/2”=3.7; HD1/3”=2.9.
Technical data:
Max. wide angle focus length (2/3“ Chip) F=mm
5.2 (4.5 s. o.)
S16, S35, SD, HD
Mattes 4:3 for F=mm
Universal
2/1/Filter stage width (mm)
110
Filter size (inch)
4x4
104
Support:
clamp adaptor *
* Also for use on 15 mm Light Weight Support with Center Adapter or DSW
400 Direct-Swing-Away System
Page 21
SD 411 – SunShade, for two 4x4” Filters up to 5.2 mm focal length.
Components
SD 411, complete as described above
Artikelnummer
411-50
Accessories
Pair of Side Wings
Pivot mechanism for French Flag 402-26, bottom
Filter holder 4x5.65 vertical
410-PM104
410-100
402-01-08
410-03
Options
Center Adaptor*
DSW® 400, Direct-Swing-Away adaptor with thread mount**
DSW® 400, Direct-Swing-Away adaptor with clamp mount **
420-02
401-402K
401-403K
Please select support according to camera and light
protection or step down ring according to lens.
Including 2 Filter holders, French Flag and 16:9
matte.
The Center Adapter
connects the SD 411 to all 15
mm Light Weight Supports.
The DSW® 400 Swing-Away
System mounts on all Light Weight
Supports of the 401-400 Series.
Filter holder 4x4
Matte 16:9
* for use on Light Weight Support with 15 mm rods.
** for use on Light Weight Support of type 401-400 with 15 mm rods.
402-04
402-26
416-03
Page 22
Hand grips and their Light-Weight Supports (HD).
Safe and convenient support for handheld shooting
The special HD Light Weight Supports safely take the handles through the
extra ridged rod clamping and base plate. The heavy-duty aluminium rods have
15 mm standard diameter and 205 mm of length.
The V-mount is compatible to the camera’s tripod adapter. For stable
connection to the tripod and quick and easy change from handheld to tripod
use, we suggest our patented QuickLock Plate (s. page 26).
Light-Weight
Support (HD)
Set hand grips with mounts to connect
to the base plate of the HD LightWeight Supports. Below: Set for Arri.
The Handgrips are extensible and adjustable in any direction and angle. The
set comprises one short grip for the left camera side and a long twice
adjustable grip for the right side. The latter is equipped with a start/stop knob
for Broadcast cameras when using prime or cine-style lenses.
Optional a further extension for the left grip is available.
A version with Arri switch and toothed disk is also available (403-01A).
Components:
Lightweight support (HD) for Panasonic Universal (except
for the following)
Lightweight support (HD) for Panasonic HPX 500/HDX 2100
Lightweight support (HD) for Sony Universal
Lightweight support (HD) for Sony HDC-1500
Lightweight support (HD) for Thomson Viper
Set with two hand grips, including grip mounts
Set with two hand grips with connectors for Arri System
Accessories
Grip extension for left grip
Article no.
401-87B
401-87B5
401-60B
401-601
401-92
403-01
403-01A
403-01-05
Adapter cable for use with:
Canon EB lenses with 8-pin plug
Fujinon EB lenses with 12-pin plug
Fujinon EB lenses with 8-pin plug
P+S Pro35 Image Converter with 3-pin Fisher plug
Rod, ∅ 15 mm, length 205 mm for light support (HD)
Set of 2 grip mounts
403-C8
403-F12
403-F8
403-F3
401-01-04
403-02
Page 23
LightWeight Supports for 2/3” Chip cameras.
Sony Universal
401-50
Panasonic Universal
401-89B
Support system for the 15mm standard - for MatteBoxes, lens
supports, follow focus devices, fluid-zoom drives, wireless focus
receivers and motors.
The light-weight supports are equipped with rod holder for height and lateral
adjustment. The base plate is made of hardened aluminium. The V-shaped
connection on the bottom is compatible with the tripod adapters supplied by
the camera manufacturer. The high-strength aluminium rods correspond to the
15 mm standard (rod diameter 15mm, rod centre-to-centre spacing 60 mm)
and have a length of 205 mm. As an option super lightweight carbon fibre
®
rods or the telescopic rods VariTube are available.
The patented QuickLock plate (see Page 25) offers a particularly stable
connection to the tripod for quick and easy change between shoulder and
tripod. See page 22 for special light-weight supports (HD) to use with hand
grips.
Components:
Lightweight
Sony Universal
for Sony BVP-550P
Panasonic Universal
Weight savings up to 80%
for JVC GY-HM 700 (rod length 150mm)
with carbon fibre rods.
for JVC GY-HD 250 / 251 (rod length 150mm)
for JVC GY-500 / DY-90E
for JVC GY-700DV / GY-5000
for Thomson TTV 1657
Ikegami Universal
for Ikegami HK 399
for Ikegami types DNS 33 / HDNX 10 among others
for BTS LDK 100 / 120 / 6000 / 7000 and other
Rods ∅ 15 mm (spare parts and optional carbon fibre rods):
Aluminum-Rod, length 205mm (standard length)
U-clamp
1 Pair Carbon-Fibre-Rods, length 205mm (standard length)
401-70
1 Pair Carbon-Fibre-Rod Extensions, length 100mm
Article no.
1 Pair Carbon-Fibre-Rod Extensions, length 50mm
401-70
Aluminum-Rod, length114
401-cable
Aluminum-Rod, length 128
401-83-190
Aluminum-Rod, length 150
401-83
Aluminum-Rod, length 205 with notch
401-14
Aluminum-Rod, length shorter than 205 mm, customized
support:
®
VariTube telescopic-rods (1 pair) for LWS,
Ø15mm, 401-01VT150: L. 150-230 mm, 40101VT200: L. 200-280 mm
V-connection
Adaptor cable
401-CABLE
Accessories:
Rod adapter (notch for cable)
Cable with Hirose 12-pin angle plug for Fujinon lens
1 Pair rod extensions 190 mm with thread mount
Article no.
401-50
401-85
401-89B
401-63
401-65
401-68
401-69
401-84
401-77
401-80
401-66A
401-91
401-01-04
401-01CF
401-83CF
401-14CF
401-01-04-114
401-01-04-128
401-01-04-150
401-01-04A
401-01-06
Page 24
QuickLock tripod adapter and bridge plates.
The patented QuickLock tripod adapter plate: for quick and easy,
play-free camera connection
Suitable for all cameras which are equipped with wedge plate connections (V-mount)
in the front and a mounting bracket behind the shoulder support.
The Chrosziel QuickLock plate clamps the camera automatically and easily, and even
after decades of use, still works perfectly thanks to its patented mechanics: pressure
on the wedge plate and traction on the camera‘s mounting bracket. It protects
against unintentional opening, but the camera can still be quickly and easily removed
in a flowing movement. On the bottom, two slot nuts with a 1/4 and 3/8 inch thread
slide over a large area to fix onto a tripod or the bridge plates.
In combination with the bridge plates, adjustment to the centre of gravity on the
tripod is very easy. The plates come with 19 mm stainless steel rods (video
standard). All accessories for the 15mm light-weight supports fit by means of an
adaptor. For video cameras with different optical axes, bridge plates are specially
adapted.
For the use of film accessories on video cameras, a special version adjusts optical
axes. This version is based on 15mm stainless steel rods.
QuickLock, for many
cameras – the solid
connection to the tripod.
Adaption for Sony
PMW-F3
401-125-11
Components:
QuickLock tripod adapter plate
Bridge plate 19mm Video-Standard (rod ∅ 19 mm,
rod centre to centre spacing 105 mm)
Bridge plate 19mm Video-Standard for Sony HDC 1500
Bridge plate 19mm Video-Standard for Sony F23 / 35
Bridge plate 19mm Video-Standard for Sony PMW-F3
Bridge plate 19mm for RED One
Bridge plate 19mm Video-Standard for SI-2K
Universal Accessory Mount for Sony F23 / 35
For all bridge plates: The various offsets of the optical axes can
be compensated for by using the slotted holes. (e.g. Sony left;
Thomson centre; Panasonic right).
Article no.
401-130
401-121
401-123
401-F235
401-125-11
401-124
401-SI2K
401-F234
Page 25
Bridge Plates / Adaptors
Bridge plate 401-F235 for Sony F23 / F35 / F65.
Bridge plate
Adaptor F3
401-125-11-01
connects Sony
PMW-F3 to Bridge
Plate 401-125
Universal Accessory
Mount 401-F234 for
Sony F23 / F35, holds
the control panel and
the studio viewfinder
HDVF C750.
Accessory Clamps:
3310 for 15 mm rods
3320 for 19 mm rods
adding two ¼” or 3/8”
treads to the rod.
Bridge plate 401-SI2K
for Silicon Imaging SI-2K.
Bridge plate 401-124 for RED One.
Mini wedge plate 401-140 connects the
DV light-weight supports of the 401-400
series with the QuickLock tripod plate.
Adaptor 401-10 for 19mm rods
with centred mounts to 15mm rods
Adaptor 401-10Q quick connector for
19mm rods with centred mounts to 15mm
video standard.
Adaptor 401-12 for 15mm rods with
film spacing (401-122) to 15mm video
standard.
horizontally and vertically adjustable
mounts for 15mm rods
film spacing (401-122), horizontally and
vertically adjustable mounts for 15mm
video standard.
Page 26
Studio Rig Follow Focus, versions for video and film lenses.
For smooth and precise focus moves due to our fluid damping module and gear units and bearings with the lowest tolerances: It allows play and jerkfree focus moves even for permanent direction changes. We abstain from using switchable gear boxes for the sake of play-free preciseness. Instead, we
use two gear boxes for the different focus markings of film and video lenses. Film lenses, prime lens and “Cine style” video lenses typically display an
adjustable range of 200º from close-up to infinity. The Studio Rig Cine translates the rotation on the hand wheel in a way to lens focus ring that
approx. one turn covers the range. The focus of the video lenses rotate only approx. 100º to 145º between close-up and infinity. For similar operation
and preciseness, the Studio Rig Video’s gear unit extends the resulting angle of rotation of the video lenses. Further adjustments are made by the use
different gear diameters. All gear drives can be easily mounted without tools. The three modules of the lens manufacturers are available.
The Studio Rig basic unit comes with hand wheel 1 with fluid damper, scale ring and focus lever and clamping unit for the 15 mm video
standard (see p. 26, with adaptor for 19mm rods). Please select the gear drive according to your lens.
The QuickFit Versions. They slip onto the rods from below – no need to dismantle other accessories. Fixed by the turn of an excenter, the focus gear
swings onto the lens – ready! They come with an interface for the 19mm rod adaptor.
Soon will be available a VariLock Module, with easy setting of two mechanical stops for (S3D) monitoring the picture while focussing. The VariLock
Module can be attached without tools between the gear and the hand wheel or instead of the second hand wheel.
Page 27
Studio Rig Follow Focus – the versions
Video Single 203-01S
Studio Rig Video 203-01
Studio Rig Cine 204-01
QuickFit
Studio Rig with QuickFit
Video 203-01Q, Cine 204-01Q
Cine Single 204-01S
Components
Studio Rig Video Single (2nd hand wheel not possible)
Studio Rig Cine Single (2nd hand wheel not possible)
Studio Rig Video
Studio Rig Cine
Studio Rig Video QuickFit
Studio Rig Cine QuickFit
System components
Hand wheel extension
Hand wheel 2
VariLock Module
Axle extension
Flexible shaft 330 mm
Hand wheel 1 with scale
Spare scale
Focus lever
Drive gears all B=8 mm
Article no.
203-01S
204-01S
203-01
204-01
203-01Q
204-01Q
201-07
201-02
201-55
201-30
201-31
201-32
201-33
201-03
201-04
201-18
/ ∅ mm /no. of teeth/mod
Angenieux, Canon, Schneider EB/ENG
35.00
68
0.5
With offset, mandatory for Canon
35.00
68
0.5
20x8
Angenieux, Canon EB/ENG
28.45
55
0.5
Fujinon EB / ENG
32.50
52
0.6
Fujinon, Nikon EB / ENG
28.70
46
0.6
Canon, Fujinon Cine Style HD / SD,
46.30
56
0.8
35mm Film
Canon, Fujinon, Zeiss fixed focal length;
36.80
44
0.8
Canon 8-64
Canon, Fujinon,
Zeiss Video fixed focal length
25.60
30
0.8
and Canon, Fujinon Cine Style HD/SD
16 mm fixed focal length; B=16 mm
33.60
40
0.8
16 mm Zoom lens; B=23.75 mm
33.60
40
0.8
Movicam fixed focal lengths
37.00
44
0.8
V = preferably Studio Rig Video / C= preferably Studio
203-40-01 Adaptor for 19 mm, included with Studio Rig QuickFit versions
C
201-16
C
201-21
V
V
V
202-16
201-10
201-17
V
201-23
V
201-22
C
201-12
C
201-05
C
201-06
C
201-11
Rig Cine
Page 28
Fluid zoom drives for movie and video lenses.
Adjustable fluid damping for smooth zoom movement. The variations
are due to optimal mechanical adjustment to the lenses for highest precision
of zoom drives. Some drives directly mount on the lens, others require a
support system (light-weight support with 15mm rod ∅). For use on bridge
plates with 15 or 19 mm rods, the extensions EU15 and EU19 are available. A
short and a long zoom lever come with the basic unit.
Components
Version 102-13S2
Version 102-10
Extension
102-19 for zoom lever mounting
Swing-Away
clamp
102-14-19
(moves the lever backward to allow
movement, if a closely attached follow
focus would block it.)
Holder 102-13-01
Fluid for
Canon, Angenieux, Nikon EB/ENG
mod
0.5
Fujinon EB/ENG
0.6
Canon 8-64 / 7-63 / 11.5-138 / 11-165, S16, ( alternative
attachment directly on the lens using holder 102-13-01)
0.8
Cooke 9-50 / 10.4-52, DSLR (Canon EOS 5D II, Nikon D90)
Canon, Fujinon Cine Style
Angenieux 10-120 T2 / 11.5-138 / Cine Style, S16,
0.8
Zeiss Digi Zoom and others with large draw angle
Zeiss 10-100 T2 / 11-110, S16 for mounting directly on the
0.8
lens, with zoom lever holder 102-35
Angenieux 17-102 T2 / 25-250, Cooke 20-60 / 20-100
(delivery without zoom lever, Swing-Away clamp
0.8
102-14-19 needed for mounting)
Canon 8-64 / 7-63 / 11.5-165, S16. Special design for direct
attachment on the lens using an ellipsoidal clamp and semi0.8
circular supporting segment for zoom lever.
Variation for Canon 6.6-66
Accessories
EU15 extension, for ∅15 mm rods
EU19 extension for ∅19 mm rod to ∅15 mm rod
Canon lens holder for fluid zoom drive 102-13
Swing-Away clamp for zoom drive 102-10
Extension for zoom lever mount (for use with narrow follow focus)
Zoom lever short
Zoom lever long
Zoom lever holder for zoom drive 102-01
Ellipsoidal clamp for zoom drive 102-13S
Semi-circular supporting segment for zoom drive 102-13S
* Lightweight support with 15mm rod∅ required
Article no.
102-15*
102-16*
102-13*
102-11*
102-01
102-10
102-13S
102-13S2
EU15
EU19
102-13-01
102-14-19
102-19
102-09
102-18
102-35
102-13-05
102-13-07
Page 29
Lens supports for SD, HD and Cine Style lenses.
Lens support 401-32 for
RED zoom 18-85.
Lens support DSLR Tele 401-34
Lens support Universal
Photo 401-33
Components 15 mm Video Standard
Lens support for Fujinon
EB / ENG and HD Video lenses
Lens support for Canon
EB / ENG lenses
HD Video lenses
HJ11x4.7, HJ21x7.5, HJ21x7.8
among others
HD Cine-Style lenses
HD Cine-Style lenses
HJ40x10 and HJ40x14 and others
HA25x16.5 and others
Lens support for Zeiss
Digi Zoom lenses
Lens support Universal Photo
Supports lens diameter: 50-120mm
Lens support DSLR Telephoto
For lenses with ¼” tripod mount
Components for 19 mm bridge plates
36x / 42x lens among others
33x lens among others
HA12x9.5, HA5x6, HA10x10, HA3x5,
HA15x7.3 and other; HK-Zooms with
PL mount, screw 3/8”
Lens support for Zeiss
Digiprime 135 mm lens
Lens support for RED
Zoom 18-85
More types and custom-made products upon request
Article no.
401-13
401-19
401-21
401-23
401-24
401-27
401-26
401-30
401-33
401-34
401-16F
401-16C
401-25
401-31
401-32
Supports for 15 mm rod diameter.
Adaptor 401-17, adjustable
Supports for 19 mm rod diameter.
Adaptor 401-10, fixed position
For use of the lens supports with 15 mm clamps on bridge plates with 19 mm rods, we
recommend the use of the universal adaptor 401-17. For lens supports with height adjustment,
also the adaptor 401-10 is compatible.
Page 30
Cine Style extensions for Sony HD viewfinder HDVF-C30W / C30WR / C35W.
Two viewfinder designs for the different types of viewfinders
With ACVF System, the Sony HDVF-C30W(R) viewfinder either mounts
directly on either side of the camera, or it can be conveniently positioned on a
lateral rod when required for the shooting situation. Additionally the system
replaces the original Sony eyepiece and the mirror housing. The eyepiece
picture is twice as large as the original and has a higher contrast. Eye relief is
30 mm. When using on the lateral rod, a levelling arm and a long monitor cable
are required.
For the Sony HDVF-C35W viewfinder which came on the market together with
the F23, we have developed a HD Cine extension, which also puts this
viewfinder on the right or left side of the F23 and F35 cameras.
The original eyepiece is replaced by a version which works without a mirror
before the monitor. An adaptor clicks eyepiece and monitor together.
For the lateral rod, a levelling arm and a long monitor cable are required.
Optionally the 16x9 eyepiece shutter “Shut Eye” can be fitted.
Sony F35 with:
HD Cine Viewfinder,
FollowFocus 204-01,
Bridge Plate 401F235, Universal
mount 401-F234 f.
750 Monitor and
control panel,
MatteBox 840.
ACVF for HDVF-C30W/C30WR
HD Cine extension for HDVF-C35W:
Eyepiece, Adaptor, lateral rod with mounts for
the Sony cameras F23 and F35.
Components:
Article no.
530-01
ACVF System for Sony HDVF-C30W
530-01R
ACVF System for Sony HDVF-C30WR
535-01
HD Cine extension for Sony HDVF-C35W
Both viewfinder extensions are delivered completely as shown. Not included:
Sony monitors, long monitor cable and the levelling arm.
Accessories:
Viewfinder connection flange, replaces the original part
520-01
of Sony HDW-F900 / 950 / 750 cameras (for ACVF)
520-02
Sony monitor cable, length 730 mm
ARRI-LE
ARRI levelling arm for lateral rod
ACVF for HDVF-C30W / C30WR
mounted directly on the camera.
Delivery includes the lateral rod
(shown left) for the use with the
telescopic levelling arm.
Page 31
For 16mm Cine, DV and HDV Camcorder
Please see
separate catalogue for video with DSLR cameras
Page 32
MB 450 Product Family for DV/HDV Camcorder, with DSW Direct-Swing-System
The 6 MatteBoxes in the 450 series perfectly meet the requirements of shooting with
compact camcorders.
All models fit the 15 mm Lightweight Supports on the basis of the 401-400. All filters can be
moved vertically and fixed in all positions, all filters are also rotating. They come ready
for shooting, with multi-format filterholders 410-04 (for 4x4” and 4x5.65”) and 402-12 (4x4”)
for the rear stage, including French Flag and Front Mask**.
The standard model MB 450R2, comes with a double filterstage, the MB 450R3 offers a
triple one (F max.=3.3 mm).
With the MB 450WSuper Wide both filter stages have identical multi-format filterholders
410-31 for 4x4” and 4x5.65” filters which freely can be rotated when using super wide
angle lenses up to 2.6 mm focal length (no mask included). And it comes with an additional
clamp-on-adaptor, Ø130 mm.
For cameras with interchangeable lenses, the DSW Direct-Swing-System offers an
unparalleled comfort for quick and easy lens change. It can be factory fitted or added on by
the user.
MB 450R2 with Carbon-Design,
lightweight and robust.
MB 450W Super Wide Ø 130 mm the only MatteBox with rotating
Double Filter Stage at F = 2.6 mm.
For light prevention, choose between fixed rings for each individual lens, or 2 flexible rings
for lens diameters from 50 to 85 mm, respectively 75 to 98 mm. Fixed rings have the
advantage to automatically position the lens to the MatteBox.
Technical Data:
450R2-DSWC, MB with DSW on
LWS
DSW 400 - version with
clamp adaptor
MB 450R1, for all wide angle
attachments. Single-Rotating Filter
Stage, multiformat filterholder for
4x5.65“ and 4x4“ (410-04), French
Flag (450-12).
Option: Holder for side wings and
side wings (a pair each, 450-10PM)
Max. wide-angle focal length (1/3”HD Chip)
3.1, (4 XDCAM ½”)
MB 450R2 F=mm
MB 450R1 and MB 450W Super Wide
2.6, (3.6 XDCAM ½”)
SD, HD
Mask inserts 4:3 for F=mm
Mask inserts 16:9 for F=mm Universal from F = 4.5 mm
Max. filter number / rotating
1,2,3 / 1,2,3
150 / 110 rear stage
Filter size (inch)
4x5.65 / 4x4
110 / 130 Super Wide
15
Support system: DV light-weight supports with rod ∅ mm
* MB 450R3: 4 / 5,2(½“) mm with Flexi - Ring 450-20 or Insertring 450-16A, 1. stage in 0°- 30°. Is the
Front stage rotated more than 30°, max. wide angle is F= 5.5 mm.
** Please always use the front mask for a focal length of 4.5 mm or more. It effectively increases the
image quality as opposed to flaps mounted in front of the lens.
Page 33
MB 450 product family for DV / HDV camcorders.
Support system with the base 401-400, HD and HDCF versions with
carbon fibre rods
DSW 500 Direct-Swing
Adapter
Supports and accessories, complete sets:
The LWS support series with the base 401-400 connects and positions the
optical axis of the camera through the individual camera plate. LightPrevention-Rings attach the MatteBox to the lens. The HD and HDCF LWS
versions feature a second rod stabilizer and a total rod length of 500 mm.
While the HD comes with aluminum rods of 310 plus 190 mm, the HDCF
has single piece 500 mm carbon rods.
Components:
Article no.
MB 450R1, 1 Multiformat filter holder 4x4/4x5.560“
MB 450R2
MB 450R2-DSWC, with DSW 400 Direct-Swing-System
MB 450R2 Super Wide, 2 Multiformat 4x4/5.65 filter holder
MB 450R3
MB 450R3-DSWC, with DSW 400 Direct-Swing-System
450-R10
450-R20
450-R20DC
450W-20
450-R30
450-R30DC
MB 450 Camera Complete Sets:
page
Light prevention ring
Flexi ring.
Please see overview
DSW 400 conversion set
Accessories:
Complete sets for many cameras! They include the MB 450 with mask,
French Flag, filter holder 4x4” and 4x5.65”, pivot mechanisms for side wings,
DV light-weight support und Light-Prevention-Ring adapted to the camera. (see
overview page)
Article no.
Pair of Side-Wings
450-10
Pivot mechanism for lower French Flag
450-11-01
Foldable French Flag, width 34,5 cm
450-11
French Flag, width 34,5 cm
450-12
Choose if necessary support system and Light-Prevention-Rings
according to your camera and lens.
The DSW Direct-Swing-System is separately available.
DSW 500 with clamp-on for 15 mm rods
401-503
DSW 400 with clamp-on for 15 mm rods
401-403S
Page 34
Selection Guide - MB 450 Product family
All MB 450 – current and former designs - fit in the same support system with 15 mm rods.
MatteBox
MB:
450R1
450R2
450W
450R3
450R2-DC
450R3-DC
Light prevention ring
Art.-No. | ∅:∅mm
Camera
Canon XH G1 / A1
Canon XL HD1 / XL-2
Canon XF 300/305
Sony HVR-V1
Sony PMW-EX1
Sony PMW-EX3
Sony HDR-FX1 & HVR-Z1
Sony HVR-Z5
Sony HVR-Z7
Sony HXR-NX5
Sony PMW-F3 (nur 450W-20)
Sony NEX-FS100
Panasonic AG-AF100
Panasonic HVX-200 / 200A
Panasonic AG-3DA1
Panasonic HPX 170/171/HMC 150/151
Panasonic HPX 250 / 160 / 130
Panasonic HPX 300
JVC GY-HD100 / 101
JVC GY-HD200 / 251
JVC GY-HM100
JVC GY-HM700
DSLR Canon 5D / Nikon D90
DSLR Canon 1D / Nikon D3S
DSLR Canon 7D/PL FGV
450-15
450-15
450-20
450-15
410-39
410-39
450-15
411-72
410-39
411-72
411-68
1
411-78
| 110:81
| 110:81
|110:75/98
| 110:81
| 110:85
| 110:85
| 110:81
| 110:M72
| 110:85
| 110:M72
| 130:95-125
| 110:M67
450-16A | 110:91
410-65 | 130:oval
411-72 | 110:M72
410-80F | 110:80
410-39 | 110:85
410-39 | 110:85
410-39 | 110:85*
450-17 | 110:70
411-72 | 110:M72
depending on lens-∅
LWS Support
Art.-No.
Gear ring for the lens / Drive wheel f. the focus pull
device DV Studio Rig and HDV Rig VariLock
Art. No./Art. No. |mod| Drive wheel | mm
401-419
401-411
401-415
401-418
401-417
401-422
401-417
401-420
401-417
401-424
401-415HD/HDCF
401-429/HD/HDCF
401-427/HD/HDCF
401-415
401-415
401-420
401-415
401-89B2
401-413
401-65
401-423
401-63
401-421S
401-93
401-425
-------- / 206-15 | 0.5 | 38,0
206-23 / 206-12 | 0.8 | 36,8
**206-30 / 206-12 | 0.8 | 36,8
206-25 / 206-14 | 0.8 | 20,8
206-24 / 206-12 | 0.8 | 36,8
206-24 / 206-12 | 0.8 | 36,8
206-22 / 206-14 | 0.8 | 20,8
206-24 / 206-12 | 0.8 | 36,8
206-27 / 206-12 | 0.8 | 36,8
**206-30 / 206-12 | 0.8 | 36,8
204-01/S / 201-12 | 0.8 | 25.6
1
for standard lens
206-24 / 206-12 | 0.8 | 36,8
206-28 / 206-12 | 0.8 | 36.8
**206-30 / 206-12 | 0.8 | 36,8
-------- / 206-16 | 0.6 | 38,0
-------- / 206-16 | 0.6 | 38,0
**206-30 / 206-12 | 0.8 | 36,8
-------- / 206-16 | 0.8 | 36,8
**206-30 / 206-12 | 0.8 | 36,8
**206-30 / 206-12 | 0.8 | 36,8
**206-30 / 206-12 | 0.8 | 36,8
Flexi Rings / Reduction Rings
For MB 450
450-20 | 110:75-98
450-22 | 110:50-85
411-68 | 130:95-125
411-67 | 130:110
411-60 | 130:110
For MB 450W Super Wide and 456 Academy
Insert ring 130 mm to thread 110 mm
Step-down ring (slotted) 130 mm to 110 mm
* Suitable for Fujinon 16 x 5.5; 13 x 3.5 and wide angle attachment WCV-82SC
** FlexiGearRing fits to lens-Ø 60 mm – 120 mm, also for combination with Studio Rig Photo.
Overview, Camera Kits: Ready-to-shoot, comprise LWS Support, MatteBox and Light-Prevention-Ring
Page 35
MB 450R2 / 450W Camera complete Sets:
Canon XF 305 / 300
Article No.
450R2-XF305KIT
Sony HVR-V1
Sony HXR-NX5
Sony PMW-EX1 / HVR-Z7
Sony PMW-EX3
Sony PMW-EX3 Super Wide Kit, wide angle
Sony NEX-FS100
450R2-V1KIT
450R2-NX5KIT
450R2-EX1KIT
450R2-EX3AKIT
450W-EX3KIT
450R2-NEXFS100KIT
Panasonic AG-AF100 (Obj. Ø 50-85 mm)
Panasonic AG-AF100 (Obj. Ø 75-98 mm)
Panasonic HPX 300
Panasonic HPX 170/171 / HMC 150/151 / Sony HVRZ5
Panasonic HPX 250 / 160 / 130
450R2-AF1KIT
450R2-AF2KIT
450R2-HPXKIT
450R2-HPX250KIT
JVC GY-HD200 / 251
JVC GY-HM700
JVC GY-HM750
JVC GY-HM100
450R2-JVC200TPKIT
450R2-JVC700AKIT
450R2-JVC750KIT
450R2-JVCHM1KIT
MB 456 Academy Camera complete Sets:
Panasonic AG-3DA1
Sony PMW-F3
Sony PMW-F3 (15 mm CF rods)
Panasonic AG-AF100 (Lens Ø 95-125 mm)
Panasonic AG-AF100 (Lens Ø 95-125 mm)
MB 456 Academy / Arri ALEXA complete Sets:
ALEXA Basic Kit
ALEXA Studio Rig Kit
ALEXA CF19 Kit / Sony V-mount (19 mm CF rods)
Article No.
456-203DA1KIT
456-20F3HDKIT
456-20F3HDCFKIT
456-20AF1KIT
456-20AFHDKIT
Article No.
456-20AL
456-20ALSR
401-121CFKIT
450R2-HMCKIT
The MatteBox 450R2 and 450W Kits comprise the LWS Light-WeightSupports with base 401-400 and a Light-Prevention-Ring fitting to the
standard lens. The same applies to the version for the Panasonic AG-3DA1
with the MB 456 Academy.
The MatteBox 456 Academy Kits comprise the LWS HD with a second rod
stabilizer and split aluminum rods with 15 mm diameter. The basic rod has the
length of 310 mm. There is an extension with 190 mm. The CF Kits comprise
Chrosziel carbon fibre rods with 15 mm Ø and 500 mm length instead of the
aluminum rods.
As light cover, these kits come with the Flexi–Light-Prevention-Ring, 411-68,
for lens diameters from 95 to 125 mm.
Alexa Kits:
CThey comprise MB 456 Academy and the Flexi–Light-Prevention-Ring, 41168, for for lens diameters from 95 to 125 mm.
The Basic Kit is supported by the telescopic VariTube rods and the DSW 500
Direct-Swing-System.
The Studio Rig Kit additionally comprises the follow focus Studio Rig Cine
Single (204-01S) with drive gear Ø 36,8 mm, mod 0.8 (201-22).
The ALEXA CF19 Kit comprises QuickLock plate, bridge plate and precision
ground 19 mm carbon fibre rods (CF) with 500 mm length. The CF rods are
made to Chrosziel specification and save more than 80% of weight compared
to steel rods.
Page 36
Selection Guide - CMB SunShade Product family
All SunShades based on the MB 450 housing - the CMB models as well as their predecessors – fit in the same clamp system with
the 110 mm connection. The 4x4 SunShade has a clamp mount for 104mm diameter; the SunShade 1000 is designed for 3x3”
filters and clamps onto lenses with a maximum diameter of 85mm.
Camera Type
Canon XH G1 / A1 // XL HD1 / XL-2
Canon EOS 7D with EFS 18-135 mm lens
Canon XF-300 / 305
Step-down ∅ 110
CMB-R10, CMB-R20, SD
455-R1
411-72* | 110:M72
411-82 |110:M82+**
411-82 | 110:M82
Adaptor ring ∅ 104
for
SD 440
411-14 | 104:M72
411-13|104:M82+**
411-13 | 104:M82
Adaptor ring ∅ 85
for
SD 1001
S1001-85 | 85:M72
S1001-67 | 85:M67
411-14 | 104:M72
S1001-85 | 85:M72
411-15 | 104:M62
411-09 | 104:M77
411-23 + S1001-67
411-13 | 104:M82
S1001-67 | 85:M67
S1001-82 | 85:M82
Sony HDR-FX1 / HVR-Z1 / HVR-Z5 / HVR-Z7
HXR-NX5
Sony HVR-V1
Sony PMW-EX1 / EX3
Sony NEX-FS100
Panasonic HVX-200 / 200A
Panasonic HPX 130/160/170/171/250
HMC150/151
411-39
411-77
411-78
411-82
411-72 | 110:M72
411-14 | 104:M72
S1001-85 | 85:M72
JVC GY-HD100 / 101 / 200 / 251
411-82 | 110:M82
411-23F | 104:M82
S1001-82 | 85:M82
For wide-angle attachments:
Canon wide-angle attachment WD-H72*
411-72 | 110:M72
| 110: 80
| 110:M77
| 110:M67
| 110:M82
455-A109 | 110:109
411-48 | 110:105
411-46 | 110:100
411-44 | 110: 98
411-42 | 110: 96
411-12 | 104:105
411-30 | 104:100
411-29 | 104: 98
411-34 | 104: 97
411-33 | 104: 95
*For Canon wide-angle attachments WD-H72, use the flexible step-down ring 455-A109 mm
+** with Heliopan adaptor ring No. 132, M62:M82
-
Page 37
CMB Product family – SunShade CMB-R10 and CMB-R20 for HDV.
The CMB-R10 is a SunShade with a rotating single filter stage, designed for 4x4”
filters. All filter positions for all lenses and all current wide-angle converters are
possible without vignetting.
The CMB-R20 is equipped with a double rotating stage for 4x4” filters. When used
with wide-angle converters, only the rear filter holder rotates (wide-angle converter
for 1/3” F=3.3 mm / ½” F=5mm). Both filters can be positioned unrestrictedly up to
4.2 mm focal length (1/3”); respectively up to 6.2 mm focal length for the ½”
XDCAM lenses.
The connecting diameter of 110 mm takes all currently used wide-angle converters.
The SunShade clamps on standard lenses with a step-down ring or is fixed with a
screw-in ring.
Technical Data:
Max. wide-angle focal length (1/3“/ 1/2” Chip) F= mm
Mask inserts 16:9 for F= mm (1/3” / 1/2“)
Filter size (inch)
Support system:
CMB-R10, single rotating stage – CMB-R20, double rotating
stage for 4x4 size filters.
The DSW© 400 Swing-away system
Connects the CMB SunShades with the DV light-weight supports.
R10: 3.3 / 4.3 | R20: 4.1 / 5.3
S16, SD, HD
Universal from 4.5 / 7
R10: 1 / 1 | R20: 2 / 2
110
4x4
110
clamp mount
Components
SunShade CMB-R10, complete with one filter holder and French Flag
SunShade CMB-R20, complete with two filter holders and French Flag
Options
Mask 16:9 from f = 4.5 mm
DSW 400, Direct swing adapter with thread mount**
DSW 400, Direct swing adapter with clamp mount**
Filter holder 4x4
French Flag 35 cm, continuous
For information on clamp rings, see page 37, and the
respective overview pages.
** for use as MatteBox on 15mm light-weight supports, incl. mounting screws
Article no.
CMB-R10
CMB-R20
450-11
450-MA
401-402S
401-403S
402-12
450-12
Page 38
SD 440 SunShade with 4x4” double-filter stage.
At only 421 gr., this universal SunShade is a super lightweight, and, with
its two 4x4” filter holders and the especially large French Flag ready for
shooting.
Two “packages” are available, 440-02 with the standard filter holder (see ill.). For
cameras with interfering microphone or hand grip, the model 440-03 has filter
holders with a short shaft that can be positioned from below.
The first filter slides horizontally; the second also rotates 170°.
The clamp mount takes lenses with a maximum diameter of 104 mm. Step-down
rings as well as adaptor rings with thread mounts for the lens filter thread are also
available.
Technical Data:
Max. wide-angle focal length
(1/3“/ 1/2”Chip / 16mm / S16mm) F= mm
Multi-Format 16, S16, 4:3 and 16:9
Filter size (inch)
support system:
Above, an adapter ring with filter
thread. Below, the step-down ring
411-23 - 104:85mm.
3.9 / 5.1 / 8.3 / 10
16, S16, SD, HD
2/1
110
4x4
104
clamp mount
Components
Article no.
SunShade SD 440, complete as described and pictured above
440-02
SunShade SD 440, complete with short filter holder used from below
440-03
Accessories
Centre adapter** for SD 440
Step-down ring ∅ 104 to 85 mm
420-02
411-23
Adaptor Ring for Sony HVR-S270
411-14L
Please select the light prevention or step-down ring corresponding to the lens.
For information on light prevention rings and on the different support
The Center Adapter connects
the 440 with the light-weight
supports.
4x4 Filter holder for 440-02 / for 440-03
402-04 / 402-12
French Flag 26,5 cm
402-28
** For use as supported MatteBox on 15mm light-weight supports.
Page 39
SD 1001 SunShade with 3x3” double filter-stage.
This smallest of the SunShade line is suitable for normal focal lengths up to a
slight wide-angle especially with SD and 16mm film. The first filter slides
horizontally, the second also rotates 170°.
The basic version includes two 3x3” filter holders. The S1001-CB package already
comes with an adapter for use on 15 mm light-weight supports (see ill.).
The clamp mount takes a lens with a maximum diameter of 85 mm. Step-down rings
and adapter rings with thread mounts for the lens filter thread are available, as well as
a French Flag as accessory.
Technical Data:
Max. wide-angle focal length 1/3”HD / 16mm / 2/3”SD
½” XDCAM / S16
Format 16mm, SD, 4:3
Filter size (inch)
Support system:
Adapter ring with filter
thread, please see overview
pages.
S1001-CB:
The center adapter for
connection light-weight supports.
French Flag as option
7 mm
12 / 18 mm
16, SD
2/1
85
3x3
85
clamp mount
Components
Article no.
SunShade SD 1000, complete as described above
S1001
SunShade SD 1000, complete with adapter for 15mm light-weight supports
S1001-CB
Accessories
French Flag 22cm, incl. pivot rod
S1001-FF
Centre adaptor* as kit for retrofit
S1001-CB-01
3x4 filter holder, vertical
S1001-34
Please select the adapter ring corresponding to the lens.
For information on light prevention rings and the different support systems, see the respective
overview pages.
3x3 filter holder
S1001-33
French Flag 22cm / pivot rod separately
S1001-FF-01 / -02
Page 40
Overview - Formats and Focal Lengths.
The following overview explains the focal length with the widest angle for MatteBoxes and SunShades. Values printed in bold are
individually measured, others are calculated.
Formats and maximum wide angle F [mm]
(m)4/3s
S 35 1.78 /
Academy
35
Still
6.6x9.6
S16
7.5x12.
4
13x17,3
14x25
24x36
4,3
4,3
5,1
3,9
4,3
5,1
7,7
4,3
4,3
6,2
5,2
6
6
7
5
6
7
10
6
6
8
7
8,4
8,4
10
7,5
8,4
10
16
10
10
12
10
10
10
12
9
10
12
19
11
11
14
12
16
16
19
15
16
20
29
16
16
22
20
Numb
er of
1/3" HD
1/2" HD
2/3" HD
filters
2.94x5.23
3.92x6.97
2,2
2,2
2,6
2,1
2,3
2,8
4,2
2,3
2,3
3,4
2,8
3,1
3,1
3,7
2,8
3,1
3,7
5,6
3,1
3,1
4,5
3,8
Product name
Filter format
MB 602
MB 840
6,6x6,6
4x5,65 / 5,56x5,56
MB 805
4x5,65 / 5x5
MB 415
SD 412
MB 456 Academy Triple
4x5,65 / 5x5
4x5,65 / 5x5
4x5,65 / 5x5
4x5,65 / 5x5
4
2
3
1
2
3
4
2
2
3
2
MB C2
SD C2
C2 MB+410-55 / SD+411-33
4x4 / 4x5,65
4x4 / 4x5,65
4x5,65
2
2
1
2,8
2,8
2,4
4
4
3,3
5,2
5,2
4,5
7
7
6
10
10
10
12
12
11
20
20
17
SD 411
SD 411 mit 411-31
4x4
4x4
2
1
2,8
2,4
3,8
3,3
5,2
4,5
7
6
12
11
12
11
20
17
SD 421
4x5,65
2
3
4,5
6,2
8
12
14
24
MB 450R1
MB 450R2
MB 450R2 Super Wide
MB 450R3
CMB-R10
CMB-R20
SD 440
SD 1000
4x5,65
4x4 / 4x5,65
4x5,65
4x4 / 4x5,65
4x4
4x4
4x4
3x3
1
2
2
3
1
2
2
2
2,6
3,1
2,6
4
3,3
4,1
3,9
7
3,5
4,1
3,6
5,3
4,4
5,5
5,2
9,3
4,8
5,7
4,8
7,3
-
7
7
8
9
8
9
10
18
10
12
11
14
15
19
19
32
12
(12 DX) 14
13
(15 DX) 18
(13 DX) 15
(15 DX) 19
(15 DX) 19
(18 DX) 32
16
18
20
23
20
23
23
28
Page 41
Studio Rig© – follow focus for the compact camcorders and DSLR-cameras.
The follow focus device for DV and HDV camcorders is compact, light
and fits on the 15mm Lightweight Supports.
The scale is easy to change and can also be read by the camera operator. The
reference marking can be adjusted for the operator or the assistants. Gear
drives and gear rings for the different lenses ensure precise adjustments and
optimal use of the lens’ adjustable angle. Lenses with built-in gear rings can of
course also be focused.
Components
Article no.
DV Studio Rig*, as shown
Studio Rig Photo*, as shown incl. reverse gear drive
Accessories
Focus lever
Scale for DV Studio Rig / HDV Rig VariLock
For gear drives and lens gear rings please see page 45
DV Studio Rig, follow focus device with fixed hand wheel. Please
order the respective gear drive and, if required, the gear ring for the
lens.
©
FlexiGearRing 206-30,
mounts without tools,
is universal adjustable between
60 and 120 mm lens diameter,
with an modulus of 0.8.
Once cut to individual length it
remains reusable for those
lenses varying in a range of
approx. 10 mm difference of
diameter.
Studio Rig Photo,
follow focus device with
reverse gear for photo
lenses.
By loosening the nut one can
mount the gears on the other side as well.
Please note!
With most lenses for the full format (EOS 5D MK II)
the focus rotation is as with video lenses. Nikon
lenses mostly turn opposite.
206-01S
206-40S
201-18
201-31
201-32
201-33
205-02
Page 42
HDV Rig VariLock®: precise focus control with autofocus and lenses without end stops.
®
HDV Rig VariLock : For precise repeatability of focus settings for
cameras with Autofocus or electronic focus control.
There are two problems for manual focus control of these cameras:
1- avoid the loss of reference points especially at the borders of the settable
focus range, infinity and macro, to achieve repeatable setting
HDV Rig VariLock
®
2- manage the variation of ranges, because the range – and the resulting
rotation angle – varies depending on focal length setting of the built-in
zoom lens.
®
The VariLock feature of the Rigs
now allows both, since the range of
rotation is fully variable for any
selectable limit.
From a distant starting point which
is set with the Autofocus, the nearer
second
focus
position
is
set
manually and marked by a stopper.
Studio Rig Photo
®
VariLock ,
complete with
reverse gear
Components
Article no.
®
HDV Rig VariLock *, as shown without gear drive
206-50S
Studio Rig Photo VariLock *
206-45S
®
®
HDV Rig VariLock hand wheel to exchange with DV Studio Rig
Accessories, gear drives and lens gear rings
See Page 44 – DV Studio Rig
206-50
The maximum rotation angle is
320°. This range covers most
applications
of
cameras
with
electronic focus control. In addition,
the camera operator himself can
precisely control and reproduce the
focus settings even without an
assistant.
Both stoppers are covered with soft
rubber for silent operation.
* For use on 15mm light-weight supports.
HDV Rig VariLock® protected by DE 202007001639 US 3674999 and international registration. VariLock® is a registered trademark of Chrosziel GmbH.
Page 43
DV Studio Rig / HDV Rig VariLock®, gear-drives and lens gear-rings
∅ mm
20.8
36.8
46
38
38
teeth
24
44
56
76
62
Art.-No.
206-14
206-12
206-13
206-15
206-16
74
78.5
-
mod
0.8
0.8
0.8
206-740
206-785
206-29
DSLR Canon EF 18-135 mm (EOS 7D) focus (slotted)
DSLR Canon EF 24-105 mm 1:4 IS USM (for EOS 5D) focus
DSLR Canon EF 24-70 mm zoom & focus ( f. EOS 5D) (slotted)
75.3
82.0
83.6
0.8
0.8
0.8
206-753
201-19
206-836
DSLR and Video
©
FlexiGearRing , adjustable, rotating angle 270-320°, suited for focus and zoom
Video:
Sony PD-150 (slotted)
Sony HVR-V1
Leica 4.5-45mm on the Panasonic DVX-100
Sony HDR-FX1, HVR-Z1
Panasonic HPX 170 / 171 / HMC 150 / 151
Sony HVR-Z7 / Z5
Panasonic HVX-200, Sony PMW-EX1 / EX3 (slotted)
Canon XL series
Canon wide angle zoom 6x, with gear drive 206-12
60120
0.8
206-30
76.3
82.3
90.8
91.5
92.8
93.3
95.0
97.6
107
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
206-21
206-25
206-20
206-22
206-28
206-27
206-24
206-23
206-26
Gear drive for lens:
for Sony lens gear-ring 206-22, DSLR
Leica, Canon, Fujinon Cine Style, DSLR
Digi Prime, cine lenses, DSLR lenses (not for VariLock)
Canon, Angenieux
Fujinon
Lens gear ring for:
DSLR Canon EFS18-135 mm (for EOS 7D)
DSLR Canon EF 24-105 mm 1:4 IS USM (for EOS 5D)
Video Sony PMW-EX1 / EX3 tooth segment for
®
mod
0.8
0.8
0.8
0.5
0.6
Zoom with Fluid Zoomdrive 102-13
®
HDV Rig VariLock protected by DE 202007001639 US 3674999 and international registration. VariLock is a registered trademark of Chrosziel GmbH.
®
®
HDV Rig VariLock geschützt durch DE 202007001639 und internationale Anmeldung. VariLock ist ein eingetragenes Warenzeichen der Chrosziel GmbH.
Page 44
DV Balancer® and Balancer® ENG – A new type of shoulder support
®
The DV Balancer
comfortably places camcorders with built-in
viewfinders in front of the eye leaving the hands free for camera
control.
Shoulder support for cameras up to 4 kg, adjusts vertically and horizontally
allowing the user to view the viewfinder eyepiece. The weight of the
camera will be absorbed by the shoulder pad and the chest rest leaving the
hands free to control the camera. The camera attachment allows a direct
“docking” on all Chrosziel light-weight supports of the 401-4xx series,
additional to the 1/4” fastening screw and rubber cushion.
For transporting, the chest rest and shoulder unit are separated. The so-
called “Memory Clip” stores the individual
immediate re-installation after unpacking.
DV Balancer® ENG for angled
ENG viewfinders and DSLRcameras with video function.
®
DV Balancer Memory Clip
stores the setting.
DV Balancer® classic 3025
®
DV Balancer for direct
“docking” on all Chrosziel
Light-weight supports of the 401- 4xx
series or Camera Adaptor 3100.
adjustment,
Components
DV Balancer® * classic, with short shoulder rod
®
DV Balancer * classic, with Belly Rest
®
DV Balancer ENG*, straigt versin with Belly Rest;
for cameras with ENG viewfinder, e. g: Sony PMW-EX3
ShoulderPad proVideo
VarioPad 15
CurvedPad 15
HandleBar proVideo (width 180 mm)
HandleBar plus proVideo (width 220 mm)
Accessories
DV Balancer® Camera Adaptor
DV Balancer Belly Rest with curved pad instead ball breast rest
* For use on 15mm DV Lightweight supports
®
DV Balancer Design and functionality are protected by DE 202007005393, US 3738318 and international registration.
®
DV Balancer is a registered trademark of Chrosziel GmbH.
for
Article no.
3020
3025
3030
3035
3034
3033
403-10
403-20
3100
S3316018
Page 45
DV Balancer® – The accessories, HandleBars proVideo and ShoulderPads proVideo
The HandleBars proVideo fit to all LightWeight Support
The Lightweight supports in the 401-4xx
series are tripod adapters, support for the MatteBoxes
and focus control devices and, at the same time,
®
connection to the DV Balancer .
For cameras without shoulder
pad the VarioPad 15 clamps
instead on all 15 mm rods.
(Art.-Nr. 3034)
Use the Balancer
Camera adapter
Art. No. 3100 for
of Chrosziel series 401-4xx but also to all other supports wit
15mm rods. For cameras without a built-in shoulder pad, for
example all VDSLR cameras, the ShoulderPad proVideo
(Art.-No. 3035) is added. It slides into the base of the
®
support series 401-400 in the same way as the DV Balancer .
The fast changing between shoulder and tripod is maintained.
The padded shoulder rest with the clamp for 15 mm rods is
also available as a single unit, named CurvedPad 15.
cameras without
supports
In addition to the
Chest Rest, a
Belly Rest
DV Balancer® classic 3020
compact for transport
CurvedPad 15,
die alternative
Schulterauflage an
rückwärtigen 15 mm
Rohren. (Art.No. 3033)
S3316018 is
available, standard
with Balancer ENG.
Art. No. 3025
and 3030.
HandleBars proVideo
(Art.-No. 403-10/20)
®
®
DV Balancer Design and functionality are protected by DE 202007005393, US 3738318 and international registration.
®
DV Balancer is a registered trademark of Chrosziel GmbH.
Page 46
Overview – Light prevention rings for the MatteBox
Typical insert ring
with overlap rim for the
immersing lens.
Typical adaptor to
place upfront the lens.
Insert ring 410-39P
for photo lenses (or
other) which vary in
size when focussed.
Insert rings for rubber bellows with Ø 100mm (410-13) connection
on MatteBoxes: MB C2 (CF-MB/ST), MB 415 (415-02F100)
Insert ring Ø 100:62 mm
Insert ring Ø 100:80 mm - for Film
Insert ring Ø 100:80 mm - for Video
Insert ring Ø 100:95 mm - for zoom lenses starting at 5mm focal length
Insert ring Ø 100:95 mm – C2 System: CWAH-1FC with CF-MB/ST for 1 filter usage
Insert rings for rubber bellows with Ø 110mm (410-11) connection
on MatteBoxes: MB 415 (415-02F110), Series MB 450 (450-02/R2/R3 + DSW)
Adapter Ø 110:81 mm
Insert ring Ø 110:85 mm - not for Fujinon HA10x5, see rubber bellows 410-47
Insert ring Ø 110:85 mm – with 22 mm tube for lenses which expand while focussed
Adapter Ø 110:91 mm
Adapter Ø 110:91 mm - short shaft
Insert ring Ø 110:95 mm - for zoom lenses with f > 5mm
Insert ring Ø 110:95 mm - CWAH-1FC with CF-MB/ST110 for 1 FH use
Article no.
410-27
410-23
410-26
410-22
410-17F
410-17V
410-16
410-19
410-28
410-15
410-18
410-25
410-21
410-14
410-55
410-20
450-15
410-80F
410-39
410-39P
410-40
410-45
450-16
450-16A
410-41
410-56
410-42
Page 47
Overview - Light prevention rings for the MatteBox
Flexi-Insert rings
With 110 mm connection for
lens diameters
from 50 to 98 mm.
Insert rings for rubber bellows with Ø 110mm (410-11) connection:
on Matte boxes: MB 415 (415-02F110), Series MB 450 (450-02/R2/R3 + DSW)
Flexi-Insert ring Ø 110:75 to 98 mm - for lens of Ø 75 mm to Ø 98 mm
Flexi-Insert ring Ø 110:50 to 85 mm - for lens of Ø 50 mm to Ø 85 mm
Rubber bellows for MatteBoxes with Ø 142.5 mm connection:
MB 602, MB 840, MB 805, MB 415 (all versions) MB C2 (CF-MB/ST)
Rubber bellows Ø 142.5:85 mm - for Fujinon HA10x5
Rubber bellows Ø 142.5:95 mm - for lens with moulded wide-angle front element
Rubber bellows Ø 142.5:100 mm
Rubber bellows Ø 142.5:104 mm for Cine Xenar lenses with 41 mm tube
Insert ring Ø 85 mm for rubber bellows - Spare part, included in 410-47
Insert ring Ø 95 mm for rubber bellows - Spare part, included in 410-14F
Retaining rings for MatteBoxes with Ø 142.5 mm connection:
MB 602, MB 840, MB 805
Retaining ring Ø 142.5:114 mm
Rubber bellows with Ø 142.5mm
connection for four lens diameters.
Retaining ring Ø 142.5:oval, for Panasonic AG-3A1
Intermediate ring Ø 165:142.5mm for MB 602 for use with retaining rings with
Ø 142.5mm connection. (Included in the delivery of the MB 602.)
Article no.
410-44
410-46
410-48
450-20
450-22
410-47
410-14F
410-13
410-64
410-11
410-66
410-47-01
410-14F-01
410-13-01
410-11-01
410-12A
410-52
410-50
410-57
410-53
410-49
410-51
410-54
410-58
410-24
610-14
Page 48
Overview – Light prevention clamping rings for the SunShade
Typical Adapter ring with screw thread.
Step-down rings for connection to the clamp adapter with Ø 104 mm
f. SunShade: SD 412 (412-02F), SD C2 (CF-SS/ST), SD 411, SD 440 (440-02/03)
Adapter ring Ø 104:M 72mm – screw thread on lens
Adapter ring Ø 104:M 72mm – special version, e.g. for Sony HVR-S270
Adapter ring Ø 104:M 77mm – screw thread on lens
Adapter ring Ø 104:M 82mm - screw thread on lens
Adapter ring Ø 104:M 82mm - for screw thread on lens for Fujinon 2/3”
Adapter ring Ø 104:M 62mm
Step-down ring Ø 104:75mm
Step-down ring Ø 104:80 mm
Possible use of the adapter rings S1001 Ø 85:M xx mm
Step-down
Step-down
Step-down
Step-down
Step-down
Step-down
Step-down
Typical Step-down ring.
ring
ring
ring
ring
ring
ring
ring
Ø
Ø
Ø
Ø
Ø
Ø
Ø
104:86
104:87
104:90
104:92
104:94
104:95
104:95
mm
mm
mm
mm
mm
mm - for lens with moulded wide-angle front element
mm
Step-down ring Ø 104:95 mm - CWAH-1FC with CF-SS/ST for use with 1 filter holder
Step-down ring Ø 104:95 mm - 411-50/-53 for 1 FH use
Intermediate ring Ø 104:100mm
When converting SD to MB for use with the insert rings Ø 100:xx mm
Article no.
411-14
411-14L
411-09
411-13
411-23F
411-15
411-32
411-21
411-22
411-23
411-24
411-25
411-26
411-16
411-27
411-28F
411-28
411-33
411-31
411-34
411-29
411-30
420-03
411-12
Page 49
Overview - Light prevention clamping rings for the SunShade
for SunShade: CMB-R10, CMB-R20, SD 412 (412-02F110)
Step-down ring Ø 110:87 mm, Cooke Panchro
Step-down ring Ø 110:95 mm – for Canon zoom 4.3 x 14
Step-down ring Ø 110:95 mm - SD C2 (CWAH-1FC with CF-SS/110) for 1 filter holder use
Step-down ring Ø 110:98 mm - with recess for wide-angle converter
Step-down ring Ø 110:104 mm - for connection of the adapter rings from Ø 104:M xx mm
Adapter ring Ø 110:109 mm (flexible) - for Canon wide-angle converter WD-H72
Adapter ring Ø 110:M 67 mm - screw thread on lens
Flexible adapter ring 110:109 mm for
Canon wide-angle converter WD-H72
Typical Step-down ring (411-43 - 110:85 mm)
Article no.
411-39
411-43
411-40
411-87
411-47
411-41
411-41-4.3
411-45
411-42
411-44
411-44W
411-46
411-49
411-48
455-A109
411-78
411-72
411-77
411-82
Page 50
Step-down rings 110:104 mm or 130:110
fo rings with the next smaller end diameter.
Flexi-Insertring 130:95 to 125 mm
lens diameter (411-68).
for SunShade: SD 840, SD 412 (412-02F130), MB 456 Academy, MB 450R2 Super Wide
Rubber bellows Ø 130:104mm, with 41 mm tube for Cine Xenar
Step-down ring Ø 130:104mm, with 41 mm tube for Cine Xenar
Intermediate ring Ø 130:110mm - for connection of the step-down rings from Ø 110:xx mm
Step-down ring Ø 130:110mm thread for use of MatteBox light prevention rings Ø 110:xx mm
Rubber bellows Ø 130:114mm, with 21 mm tube, e. g. for Sony PL primes
Rubber bellows Ø 130:114mm, with 7 mm tube, e. g. for Zeiss CP II primes
Step-down ring Ø 130:117,4mm
Step-down ring Ø 130:oval, for Panasonic AG-3A1
Flexi-Insert-Ring, clamp- on Ø 130 mm – lens coverage: Ø 95 – 125 mm
Typical Step-down ring
(411-69 130:125 mm).
410-104
410-67
411-64
411-59B
411-60
411-67
410-114
410-114A
411-65
411-56
411-66
411-55
411-71
411-69
411-57
411-63
411-61
410-65
411-68
411-58
Page 51
for SunShade SD 1001
Adapter ring Ø 85:M 58mm - screw thread on lens, conical
Adapter ring Ø 85:M 58mm - screw thread on lens - flat
Adapter ring Ø 85:M 82mm
Adapter ring Ø 85:M 72mm - specially for Canon XL1 aluminium, screw-in mount
Adapter ring Ø 85:M 72mm - screw thread on lens
Adapter with exterior and interior thread:
Adapter ring Ø M 58:M 52 mm - 58mm screw thread on lens, Heliopan 452
Adapter ring Ø M 52:75.5 mm - 52mm - screw thread on lens,
For combining with S1001-75
Article no.
S1001-58A
S1001-58SR
S1001-82
S1001-85
S1001-73
S1001-HP
S1001-HP1
S1001-HP3
S1001-HP77
S1001-01S
Step-down ring Ø 85:62.5 mm
Insert ring Ø 85:65mm - for JVC in combination with light-weight support
Step-down ring Ø 85:75.5 mm
S1001-62
S1001-65
S1001-65S
S1001-75
Step-down
Step-down
Step-down
Step-down
S1001-75C
S1001-79
S1001-79.5
S1001-80
ring
ring
ring
ring
Ø
Ø
Ø
Ø
85:75 mm
85:79 mm
85:79.5 mm
85:80 mm
Shape of ring is either conical or
cylindrical, according to lens and
application.
Page 52
Overview - Filter holder
Filter holder for stages with a width of 85mm
Insert Filterholder
410-05.
Filterholder 410-38
for round filters on a
150mm stage.
Filter holder 3x3 (for S1001 SunShade)
Filter holder 3x4 (for S1001 SunShade)
Filter holder 3x3 – shaded on four sides
Filter holder 3x4 - vertical, shaded on both sides
Filter holder 4x4
Filter holder 4x4 - with short shaft
Filter holder 4x5 - vertical
Filter holder 4x6 - vertical
Filter holder 4x5.650 - vertical
Holding Ring for round filters Ø 138mm with thread
Filter holder 4 1/2 round, 2 parts, f. use within 138mm compartm. of rubber
Filter holder for stages with A width of 150mm
Filter holder 4x4 - shaded on both sides
Filter holder 4x5 - shaded on both sides , vertical
Filter holder 4x6 - shaded on both sides , vertical
Filter holder 4x4 and 4x5.650 Multiformat - horizontal
Filter holder 4x4 and 4x5.650 Multiformat - with short shaft, horizontal
Filter holder 4x5.650 - shaded on both sides , vertical
Filter holder 5x5 and 4x5.650 Multiformat - horizontal
Filter holder 5x5 and 4x5.650 Multiformat - vertical and horizontal
Filter holder 5.650x5.650 and 4x5.650 Multiformat - vertical
Filter holder 5.650x5.650
Filter holder round Ø 138mm
Insert Filterholder, 360° rotating, for a filter holder with a width of 110mm and
a Ø 138mm round filter
Filter holder 6.6x6.6
Filter holder 6.6x6.6 - with gear wheel guide
Insert filter holder for FH 610-01/-02 Multiformat 4x4 and 4x5.650 horizontal
Insert filter holder for FH 610-01/-02 5x6 horizontal
Insert filter holder for FH 610-01/-02 5.650x5.650
Article no.
S1001-33
S1001-34
402-02
402-03
402-04
402-12
402-08
402-06
410-03
410-08
410-09
410-33
410-37
410-36
410-31
410-04
410-35
510-01
410-32
510-05
510-03
410-38
410-05
610-01
610-02
610-01-45
610-01-56
610-01-565
Page 53
Overview – Standard accessories.
At one glance:
All French Flags, side wings
and their mounts…
… and
all mattes
French Flags
French Flag 22cm, end-to-end for SD 1001
French Flag 36cm, foldable for MB 456, CLWAH-43, CWAH-1FC, SD 411, SD 421
French Flag 26.5cm, foldable for SD 440
French Flag 39cm, foldable for CWAH-FV, MB 415, SD 412, CBH-S16
French Flag 46cm, foldable for MB/SD 840, MB 805
French Flag 34.5cm, foldable for MB 450
French Flag 35cm, end-to-end for CMB-R10, CMB-R20
French Flag 54cm, foldable for MB 602
Pivot mechanisms to mount a bottom French Flag
Pivot mechanism complete, length 162mm for SD 411-50, CWAH-1FC
Pivot mechanism complete , length 197mm for CWAH-FV
Pivot mechanism complete , length 203mm for MB/SD 840, MB 805, MB 415, SD 412
Pivot mechanism complete , length 164mm for MB 456 Academy
Side wings and holder for side wings
Side wings, Pair for MB 450
Side wings, Pair for MB 456 Academy, SD 411, CWAH-1FC, CWAH-FV, CBH-S16
Side wings, Pair extra large for MB 840, MB 415, MB 805, SD 412
Side wings, Pair for MB 602
Pivot mechanism for side wings, length 93mm for CWAH-FV, CBH-S16, MB 602
Pivot mechanism for side wings, length 104mm for MB 456, SD 411, CWAH-1FC
Pivot mechanism for side wings, length 116mm for MB 840, MB 415, MB 805, SD 412
Mattes
Matte for MB 450, CMB-R10, CMB-R20
Matte for MB 456 Academy, SD 411, CWAH-1FC
Matte set 16:9 (5 pieces) for MB/SD 840, MB 805, MB 415, SD 412
Matte set 4:3 (5 pieces) for MB/SD 840, MB 805, MB 415, SD 412
Matte set (4 pieces) for MB 602
Rod holders for light-weight supports rod Ø 15mm
Centre adapter for SunShades (not CMB Series)
DSW 400 Direct swing adapter with clamp mount for MB 450, CMB
DSW 400 Direct swing adapter with clamp mount for SD
DSW 500 Direct swing adapter with clamp mount for 15 mm rods
Article no.
S1001-FF-01
402-26
402-28
410-29
410-30
450-11
450-12
610-09
402-01-08
410-01-08
410-02-08
456-11-01
450-10
410-100
410-200
610-10
410-PM
410-PM104
410-PM116
450-MA
416-03
410-MA169
410-MA43
610-MA
420-02
401-403S
401-403K
401-503
Page 54
Overview – Video Lenses: Fujinon
Please note:
* these lenses are “cine style” versions with mod 0.8 /
Yellow-highlighted lenses require either Fujinon original or Chrosziel lens support 401-25
Fujinon 1/3” HD
TH13x3.5
TH16x5.5
TH17x5
HTS18x4.2
XT17x4.5B
XT20sx4.7
Outside Ø
85
85
85
85
85
85
mm
mm
mm
mm
mm
mm
Fujinon 1/2” HD
XS13x3.3
HS16x4.6
XS17x5.5
HS18x5.5
XS8X4
XA16X8A-XB8
Outside Ø
Fujinon 2/3” HD
95
85
85
85
100
85
HAe3x5 B-10*
HA5x6 B-10*
HA10x5
HA10x5 B-10*
HA10x5.2
HAe10x10 B-10*
HAe12x9.5 B-10*
ZA12x4.5
HA13x4.5
HA13x4.5 B-10*
HA14x4.5
HAc15x7.3 B-10*
HA15x8
HA14x8
HA16x6.3
XA16sx8
XA17x7.6
HA17x7.8
ZA17x7.6
HA18x7.6
HAc18x7.6 B-10*
HA20x7.5
HA20x7.8
XA20sx8.5
HA21x7.8
HA22x7.3
ZA22x7.6
mm
mm
mm
mm
mm
mm
Outside Ø
128 mm
128 mm
85 mm
85 mm
95 mm
128 mm
156 mm
95 mm
95 mm
95 mm
95 mm
110 mm
100 mm
96 mm
95 mm
85mm
85 mm
85 mm
85 mm
85 mm
85 mm
110 mm
110 mm
85 mm
85 mm
110 mm
100 mm
Fujinon 2/3" HD
Outside Ø
HA23x7.6
HA25x11.5
HA23x7.6
HA36x10.5
HA42x9.7
HA42x13.5
HAe 5mm-Prime
HAe 8mm-Prime
HAe12mm-Prime
HAe16mm-Prime
HAe20mm-Prime
HAe34mm-Prime
HAe40mm-Prime
HAe40mm-PrimeB-M10*
HAe54mm-Prime
HAe54mm-PrimeB M10*
ZA12x4.5
XA16sX8 BRAM
ZA17x7.6
XA17x7.6
XA20sX8,5 BRM
ZA22x7.6
HK-Zoom series with PL *
XA 16x8
XA 5x8
100 mm
110 mm
100 mm
130 mm
130 mm
130 mm
old 120/90 mm
95 mm
95 mm
95 mm
95 mm
95 mm
95 mm
95 mm
95 mm
95 mm
95 mm
85mm
85mm
85mm
85mm
100 mm
136 mm
85 mm
85 mm
SD lens information please download from our website: “Lens diameter.pdf”
Page 55
Overview – Video lenses: Canon; Angeniéux, Cooke, Zeiss
Please note
Canon 1/3" HD
* these lenses are “cine style” versions with mod 0.8 /
Outside Ø
Canon 1/2"HD
KH13x4.5
86 mm
KT14x4.4KRSJ
KH16ex5.7
KH20x6.4
85 mm
85 mm
KT17ex4.3
Outside Ø
Canon 2/3” HD
Outside Ø
81 mm
int. M72
85 mm
HJ9x5.5
HJ9x5.5 KLL-SC*
KJ10ex4.5
HJ11x4.7 KLL-SC*
KJ13x6
HJ14x4.3
HJ15x8
HJ15ex8.5
KJ16ex7.7
HJ16x8
HJ17x7.6
HJ17ex7.7
HJ18x7.8
HJ18x7.8 KLL-SC *
86
86
95
95
86
95
98
85
85
85
85
98
105
105
Angeniéux 2/3” HD
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Outside Ø
10x5.3
10x5.3 *
11.5x5.3*
12x9.7
12x9.7 *
19x7.3
92
92
100
162
162
87
mm
mm
mm
mm
mm
mm
26x7.8
40x11
40x15
103 mm
132 mm
132 mm
SD lens information please download from our website: “Lens diameter.pdf”
Canon 2/3" HD
HJ20x8
KJ20x8.5
HJ21x7.5
KJ21ex7.6
HJ21x7.8
HJ22ex7.6
HJ40x10
HJ40x14
FJ5mm Prime
FJ9, 14, 24, 35, 55mmPrime
FJs5, 9, 14mm Prime
FJs24, 35, 55mm Prime
Zeiss 2/3” HD
5-70 mm Primes
3.9mm Prime
6-24 mm Zoom*
17-112mm Zoom *
135mm Prime
Cooke 2/3” HD
8-46mm Zoom*
OutsideØ
98
85
117
98
98
98
132
132
120
80
95
95
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Outside Ø
95
95
95
95
mm
mm
mm
mm
117 mm
Outside Ø
150 mm
Page 56
Overview – Video lenses: DV / HDV Camcorder 1/3”
Canon
Canon XL-1
Canon XL-2
Canon XM-1
Canon XM-2
Canon GL-1
Canon GL-2
Canon XH-A1
Canon XH-G1
Canon XL-H1
Canon WD-H72
Panasonic
Panasonic DVX-100 (Obj. Leica 4.5 - 45mm)
Panasonic AG-EZ1
Panasonic NV-DX1E
Panasonic conversion lens AG-LA7200G
(Special design: MatteBox 411-50P)
Panasonic HVX-200 / HPX171 / HMC151
Panasonic LW7208G
Panasonic HPX171 / HMC151
JVC
JVC GY-DV300 (lens 14x5.6)
JVC GY-HD100 (lens 16x5.5 and lens 13x3.5)
JVC converter WCV-82SC
JVC GY-DV550 (lens 14x7.3)
JVC GY-HD200
JVC GY-HD251
Filter thread
Ø
Outside Ø
72 mm
72 mm
58 mm
58 mm
58 mm
58 mm
72 mm
81 mm
72 mm
81 mm
72 mm
81 mm
109 mm
Filter Ø
Outside Ø
72 mm
52 mm
52 mm
rectangular
72 mm
91 mm
97 mm
72 mm
Filter Ø
52 mm
82 mm
82 mm
82 mm
62 mm
82 mm
82 mm
-*
Outside Ø
85
85
85
85
65
85
85
mm
mm
mm
mm
mm
mm
mm
Sony
Sony HVR-A1
Sony PD-100
Sony PD-150
Sony PD-170
Sony PD-X10
Sony 10P
Sony TRV-900
Sony TRV-950
Sony VX-1000
Sony VX-9000
Sony VX-2000
Sony DSR-200
Sony DSR-250
Sony DSR-390 Canon YJ19x6.7
Sony HVR-Z1U
Sony HDR-FX1
Sony VCL-HG 0737
Sony VCL-HG 0758
(use ring 411-27 Ø 104:94mm)
Sony VCL-HG0872 0.8
Sony VCL-412WH (HVR-Z7E)
Sony VCL-412WS (HVR-S270E)
Sony VCL-308BWH (HVR-Z7E)
Sony VCL-308BWS (HVR-S270E)
*not applicable
Filter thread
Ø
37 mm
52 mm
58 mm
58 mm
37 mm
37 mm
52 mm
37 mm
52 mm
52 mm
58 mm
Outside Ø
52 mm
58 mm
72 mm
72 mm
37 mm
85 mm
81 mm
81 mm
93 mm
72
72
72
82
82
mm
mm
mm
mm
mm
96 mm
85mm
85mm
Page 57
Overview – Century Converter for Video lenses: DV/HDV 1/3”
Filter
thread Ø
Century Converters
AD-5820-00
AD-5840-00
AD-5870-00
AD-7220
AD-7235
DS-1609-58
DS-1609-GL
DS-20TC-58
DS-20TC-GL
DS-20TC-SB
DS-55WA-58
DS-55WA-SB
DS-65CV-58
DS-65CV-SB
DS-FEWA-58
DS-FEWA-GL
DS-FEWA-SB
DS-WS13-58
DS-WS13-GL
DS-WS13-SB
DS1609-SB
OAD-3725-00
OAD-7220-00
OAD-7235-00
OAD-8616-00
OAD-8620-00
OAD-8626-00
ODS-1609-37
ODS-55WA-37
ODS-FEWA-37
ODS-HR20-37
ODS-HR65-37
OHD-06WA-HVX
OHD-06WA-XLH
OHD-16TC-HVX
OHD-16TC-SH6
+ 2.0 Dioptre
+ 4.0 Dioptre
+ 7.0 Dioptre
+ 2.0 Dioptre
+ 3.5 Dioptre
16:9 Widescreen adaptor
2x Tele converter
2x Tele converter
2x Tele converter
.55x Wide angle converter
.3x Ultra Fisheye adaptor
.3x Ultra Fisheye adaptor
.3x Ultra Fisheye
1.33x Anamorphic conv.
+ 2.5 Dioptre
+ 2.0 Dioptre
+ 3.5 Dioptre
1.6 Dioptre
+ 2.0 Dioptre
+ 2.6 Dioptre
55x Wide angle converter
.3x Ultra Fisheye
.2x Tele converter
65x Wide angle converter
1.6x Tele converter
1.6x Tele converter
37 mm
72 mm
72 mm
86
86
62
43
mm
mm
mm
mm
62
62
102
102
102
102
mm
mm
mm
mm
mm
mm
Outside Ø
Century converter
60
60
60
75.4
75.4
75
75
80
80
80
75
75
80
80
112
112
112
95
95
95
75
40
75.4
75.4
88.5
88.5
88.5
69
45
78
65
65
105
105
104.97
105
OHD-16TC-XLH
OHD-20TC-HVX
OHD-20TC-SH6
OHD-55WA-SH6
OHD-65CV-SH6
OHD-75CV-HVX
OHD-FE3X-SH6
OHD-FE3X-XLH
OHD-FEAD-SH6
OHD-FEAD-XLH
OHD-FESU-HVX
OHD-FEWA-HVX
OTC-16LC-85
OVS-08CV-72
OWA-7X5X-00
OWA-7X93-00
OWA-8XLC-00
OWA-FESU-RD
OXF-213B-00
VS-06WA-DVX
VS-06WA-HDS
VS-06WA-MXL
VS-06WA-XL2
VS-07CV-DVX
VS-07CV-HDS
VS-07CV-MXL
VS-07CV-XL2
VS-16CV-HDS
VS-16TC-DVX
VS-16TC-MXL
VS-16TC-XL
VS-FE3X-DVX
VS-FEWA-3XL
VS-FEWA-DVX
VS-FEWA-MXL
VS-FEWA-XL
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Filter
thread Ø
1.6x Tele converter
2.0x Tele converter
2.0x Tele converter
.3x Ultra Fisheye
.3x Ultra Fisheye
Fisheye
Fisheye
Fisheye
Xtreme Fisheye
1.6x Tele converter
Wide angle adaptor Set (.7x and .5x)
Super Fisheye
2.0x Tele converter
1.6x Tele converter
1.6x Tele converter
1.6x Tele converter
1.6x Tele converter
.3x Ultra Fisheye
Fisheye
Fisheye
Fisheye
Fisheye
102
102
102
86
86
mm
mm
mm
mm
mm
Outside Ø
105
105
105
90
90
105
116.7
115
100
90
120
117.8
58.2
86 mm
90
133.3
119.9
109.95
132.71
105
95
95
95
95
95
105
95
95
105
105
105
105
116.7
90
90
90
90
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Page 58
Overview – motion picture lenses:
Angénieux
Zoom 10 – 120 mm
Zoom 11.5 – 138 mm
Zoom Optimo 17 – 80 mm
Zoom 25 – 250 mm
Zoom 10 – 150 mm, 12 – 120 mm
Zoom 7 – 81 mm
Zoom 24 – 290 mm
Zoom Optimo DP 30 - 80 mm
Zoom Optimo DP 16 - 42 mm
Outside Ø
114 mm
114 mm
136 mm
114 mm
114 mm
136 mm
75 mm
100 mm
162 mm
114 mm
114 mm
Canon
Canon 11.5 - 138 and 11 – 165
Canon 7 - 53, 7 - 56 and 8 – 64
Canon 6mm
Canon 10mm, 15mm, 24mm, 35mm
Canon 6.6 – 66mm
Outside Ø
95 mm
95 mm
150 mm
80 mm
110 mm
Zeiss
Zeiss 10 - 100, 11 - 110, Century 6mm
Zeiss Prime lenses
Zeiss HS lenses
Zeiss 9.5 and 12mm - old model
Zeiss 16mm and 25mm - old model
Zeiss Standard Speed 16, 20, 24, 28mm T2.1
Zeiss Standard Speed 32, 40, 50, 85, 135mm T2.1
Outside Ø
87 mm
80 mm
80 mm
70 mm
62 mm
80 mm
80 mm
OpTex
OpTex Super Cine 8 and 5.5mm
OpTex Super Cine 8 and 5.5mm
Outside Ø
90 mm
150 mm
Arri Zeiss
Ultra Prime Distagon 8mm
Ultra Prime Distagon 10mm, 12mm
Ultra Prime Distagon 14mm
Ultra Prime Distagon 16mm, 20mm, 24mm, 28mm, 32mm and 40mm
Ultra Prime Planar 50mm, 65mm, 85mm, 100mm, 135mm
Ultra Prime Super 16 Distagon 6, 8, 9.5, 12, 14, 18, 25, 35, 50mm
Ultra Prime Sonnar 100mm, 135mm
Ultra Prime Sonnar 180mm
Ultra Prime 8R 8mm
Variable Primes VP1 (16-30mm), VP2 (29-60mm), VP3 (55-105mm)
Prime Distagon 18mm, 25mm, 35mm, 16mm, 20mm, 24mm, 28mm
Prime Distagon 10 mm
Prime Distagon 14mm
Prime Planar 50mm, 65mm, 85mm, 32mm, 40mm
Prime Planar 100mm, 135mm, 180mm
Prime Makro-Planar 60 mm
ARRI 12 mm
Master Primes 12mm
Master Primes (16mm, 18mm, 21mm, 25mm, 27mm, 32mm)
Master Primes (35mm, 40mm, 50mm, 65mm, 75mm, 100mm)
Master Prime 150mm
Tilt Focus Lenses 24 mm, 45 mm and 90 mm
Compact Primes CP.2 lenses 18, 21, 25, 28, 35, 50, 85mm
(z.B. CP.2 Distagon 35 T2.1, Planar 50mm/T1.5, Planar 85/T1.5)
Ultra Super 16mm (6mm, 8mm, 9.5mm, 12mm, 14mm)
Master Macro T2.0/100 mm
Arri/Zeiss LWZ -1
Lightweight Zoom LWZ-1 15.5 – 45mm
Outside Ø
134 mm
156 mm
114 mm
95 mm
95 mm
95 mm
95 mm
114 mm
134 mm
150 mm
80 mm
156 mm
114 mm
80 mm
80 mm
80 mm
135 mm
156 mm
114 mm
114 mm
134 mm
87 mm
114 mm
95
114
114
114
mm
mm
mm
mm
Page 59
Overview – motion picture lenses:
Cooke
Cooke 9 - 50, 10.4 – 52
Cooke S4 (14, 16, 18, 25, 32, 50, 75 and 100mm
Cooke S4 ( 6, 9.5, 12mm) – new lenses
Cooke 20 – 100
Cooke S4/i 15 – 40 mm
Cooke S4/i 150mm Prime
Cooke SK4 Prime 6mm, 9.5mm, 12mm
Cooke SK4 Prime 6mm, 9.5mm, 12mm
Cooke 18 – 100
Cooke RED zoom 14-135mm
Cooke RED 12mm
Cooke RED 150mm
Cooke RED 180mm, 300mm
Cooke RED Cxx zoom
Cooke 25 – 250 Cinetal
Cooke 25 – 250 MK II Cine Varotal
Cooke 25 – 250 Cine Varotal
Cooke 20 – 60 Varopanchro
Cooke 18, 25, 32, 50, 75, 100 mm Panchro lenses
Cooke 5/i 18mm, 25mm, 32mm, 40mm
Cooke 5/i 50mm, 65mm, 75mm, 100mm, 135mm
Outside Ø
83 mm
110 mm
110 mm
145 mm
136 mm
125 mm
110 mm
145 mm
150 mm
110 mm
156 mm
125 mm
136 mm
125 mm
150 mm
121 mm
124 mm
121 mm
87 mm
110 mm
110 mm
Elite lenses
Prime lens 9.6mm
Prime lens 12mm and 14mm
Prime lens 16mm, 18mm, 20mm, 22mm, 24mm, 28mm, 35mm
Outside Ø
156 mm
132 mm
110 mm
Fujinon
Fujinon HK3.1x / 4.7x / 5.3x / 7.5x
Are/Fujinon ALURA Zoom 18-80 + 45-250mm
Arri/Fujinon ALURA LWZ Zoom 15.5- 45mm
Arri/Fujinon ALURA LWZ Zoom 30-80mm
Outside Ø
136 mm
134 mm
114 mm
Leica Summilux C lenses (by BrandPro)
16mm, 18mm, 21mm, 25mm, 35mm, 40mm
50mm, 65mm, 75mm, 100mm
Outside Ø
95 mm
95 mm
OPTAR Illumina
Prime lenses 8mm, 9.5mm, 12mm, 16mm, 25mm, 50mm
Outside-Ø
80 mm
Sony
Sony Prime Lenses (35mm, 50mm, 85mm)
Sony Zoom 18-180 mm
Outside Ø
114 mm
114 mm
RED lenses
RED 17-50mm – New version V2
(Older Version =V1=144mm)
RED 18-50mm
RED 18-85mm
RED 50-150mm
RED 300mm
RED Pro Primes 18mm
RED PRO 300mm
RED PRO Primes 25, 35, 50, 85, 100 mm
Outside Ø
114 mm
114 mm
142 mm
114 mm
117,4 mm
110 mm
138 mm
110 mm
Page 60
Overview – DSLR lenses:
Focus
Outside
Ø mm
Manufacturer
Type
Canon:
EF 24-105mm / 1:4 IS UMS (5D)
Filter thread
Ø mm
83,5
EF-S18-135 (7D)
Ø mm
Chrosziel gear
201-19
78,5
206-785
67,0
75,3
206-753
74,0
206-740
70,0
206-30
85,0
206-850
82,0
76,0
206-21
EF 28-300mm / 1:3,5-5,6
92,0
77,0
90,5
206-20
EF 70-200mm 1:2.8 L ISII USM
89,0
209-890
74,5
206-21+ Insert
80,0
78,9
206-785
83,5
78,0
206-785
79,0
79,0
206-785
EF 24mm / 1:1,4
EF 24mm / 1:3,5
EF 35mm / 1:1,4
-
EF 50mm / 1:1,2
85,8
85,8
206-30
EF 85mm / 1:1,2
91,5
91,4
206-22
EF 200mm / 1:2
128,0
100,0
206-30
EF 600mm / 1:4
168,0
117,5
206-30
EF CN-E 14.5-60mm
EF CN-E
136
30-300 mm
EF CN-E 24 mm T1.5 LF
136
114
EF CN-E 50 mm T1.3LF
114
EF CN-E 85 mm T1.3LF
114
Chrosziel gear
82,0
88,2
77,0
Ø mm
77,0
EF 16-35mm / 1:2,8
EF 14mm / 1:2,8
Zoom
Nikon:
D90
-
60-120
206-30
Nikon:
D3S
-
60-120
206-30
Zeiss für Nikon:
Distagon 28, 35 mm
62,2
58,0
63,4
206-30
Distagon 25 mm
88,0
82,0
63,1
206-30
Distagon 18 mm
63,3
82,0
63,3
206-30
Makro Planar 50 mm
70,4
67,0
70,4
206-30
Makro Planar 100 mm
72,2
67,0
76,0
206-21
Page 61
Overview – DSLR lenses:
Focus
Outside
Ø mm
Manufacturer
Type
Sigma:
75-200mm / 1:2,8
86,5 mm
30mm / 1:1,4
77,3 mm
150mm, / 1:2,8
Tamron:
28-75mm / 1:2.8
Zeiss Compact Primes:
Compact Primes 18, 21, 25, 28, 35, 50,
85mm
Schneider Cine Xenar
Zeiss Standard Speed 16, 20, 24, 28mm
T2.1
Zeiss Standard Speed 32, 40, 50, 85,
135mm T2.1
Filter thread
Ø mm
-
Ø mm
Chrosziel gear
86,5
206-30
62,0
77,3
206-785
79,6 mm
72,0
80,0
206-30
73 mm
67,0
71,1
206-21 with insert
114 mm
104 mm
80 mm
80 mm
Distagon T1.4/35
M72
Panasonic Micro Four thirds f. AG-AF100 / AG-AF-101:
Lumix G Vario
45-200mm / F4.0 – 5.6
ca. 55 mm
Lumix G Vario
14-45mm / F3.5 - 5.6
ca. 55 mm
52 mm
52 mm
Lumix G Vario
7-14mm / F4.0
ca. 70 mm
No filter
Lumix G Vario HD
14-140mm / F4.0 – 5.8
ca. 65 mm
62 mm
Lumix G
20mm / F1.7
ca. 50 mm
46 mm
Lumix G
Fisheye 8mm / F3.5
ca. 60 mm
No filter
Panasonic Four thirds f. AG-AF100 / AG-AF-101:
Leica DG
45mm / F2.8
ca. 50 mm
46 mm
Leica D Vario Elmarit
14-50mm / F2.8 – 3.5
ca. 75 mm
72 mm
Leica D Vario-Elmar
14-50mm / F3.8 – 5.6
ca. 70 mm
67 mm
Leica D Vario-Elmar
14-150mm / F3.5 – 5.6
ca. 75 mm
72 mm
Leica D Summilux
25mm / F1.4
ca. 78 mm
62 mm
Zoom
Ø mm
Chrosziel gear
86,0
206-30
70,0
206-30
Page 62
Remote control systems:
The wireless remote dimmer for on-board-light.
The wireless remote follow focus
ALADIN MARK II
The automatic remote lens control
Page 63
Wireless remote dimmer for head light / on-board-light.
Colibri controls the head light of the “suspended
cameras” and each mobile DMX dimmer from the lighting
console.
Transmitter and
receiver are
equipped with the
same controls.
The transmitter takes in the control input of the DMX board, changes it
into a digital data package and transmits the setting to the receiver
with built-in dimmer. All tungsten lights of up to 75 watts can be
connected to the dimmer. The necessary control voltage for the LED
lights from Litepanel is also accessible from the receiver, so that the
LED light’s internal dimmer also is controlled. An 8-pin jack is available
on the receiver, thus providing the option to control remotely other
manufacturers’ LED lights in the future.
At this jack, the DMX signal of the set address is available, too.
With this, lights which are mounted at wider distance or high
above the scene can be remote-controlled.
Although the control of the light controller from the DMX signal is the
main use, there is also the possibility to set the dimmer manually using
a potentiometer from the transmitter and on the camera (receiver).
This should be seen, initially as an emergency feature, but can also be
used intentionally. If there is no DMX signal for the transmitter, this
switches to manual and a blue LED light on the potentiometer shows its
activity. If the transmitter is switched off or there is no RF signal at the
receiver for other reasons, its potentiometer adjusts the brightness.
All DMX addresses from 1 to 512 can easily be set decimally on three
scales.
The transmitter
with the DMX input.
Rear views:
The receiver with DMX
signal output and integrated
dimmer up to 75 W.
The same radio modules are used as with the lens control Aladin. This
means that the same frequencies are available and because the
“language” is otherwise the same, the Colibri receiver/dimmer can be
operated by an Aladin remote control, too.
Page 64
Wireless remote - Dimmer for head light / on-board-light.
Components:
Article no.
Transmitter, receiver, power supply for transmitter, 2
FD-400
antennas, 5-pin DMX cable
Anton/Bauer power cable f. receiver
FD-AB
4-pin XLR power cable f. receiver
FD-XLR
Technical Data:
Transmitter frequencies: 16 channels; 433.1-434.225 MHz
Transmitter performance:
10 mW on 50 Ohms
Range (open area) approx.:
300 m / 330 yards
Weight / measurements(g / mm):
200 / d80 h42 w96
Dimmer for Halogen lights:
PWM / 75 Watt max.
Compatible with LED lights from the
Litepanel
manufacturer:
Other LED lights upon request.
Page 65
The wireless remote follow focus.
DigiFOX is a reliable companion for recording with a moving
camera. Whether using a crane, dolly or stabilizer, the DigiFOX
wireless remote follow focus is simply and quickly ready to use. It
transmits the control signal as a digital data package to motors with
incremental encoders.
Only the DigiFOX also controls internal focus motors as well as
the start/stop signal of the Panasonic HDV camcorder HVX200, HPX171
and others.
- 16 transmission channels are selectable within the
434 MHz – frequency band (US & UK versions 457 MHz)
- Range* approx. 300m/330yards outdoors and approx. 80m /
90yards in buildings
- Light weight, compact receiver (8x4x9.5 cm / 3x1.6x3.7 inch,
weight 260 g / 9.2 ounces)
- Compatible with external motors with incremental decoders and
internal focus servo motors of many EB lenses from Canon and
Fujinon
- Automatic calibration of the end settings and power provision for the
motor dependent on the lens’s mechanical performance
- Resolution 32 bit, integrated ON/OFF or start/stop recording function
- “Electronic gear” for spreading or compressing of the translation ratio
between the hand wheel and motor reaction
- Memory of the last settings if the battery must be changed.
- Also controls the dimmer module from the Aladin system
- Integrated serial interface RS 232 for easy software upgrades
or connecting to PC or PDA
- 1.5 V D-cell included
- Lowest power consumption, a battery usually last for an entire day.
- Option: Rechargeable battery, charger for 110-240 V AC, 33 VA,
with all international plug adapters
* dependent on the structural conditions at the set.
Page 66
The wireless remote follow focus.
Without an external
motor, the DigiFOX
can control the
following Panasonic
cameras as well as
trigger the start/stop
signal:
AG-HVX200,
AG-HPX171,
AG-HMC150 series;
AG-DVX100BE,
AG-DVX100B,
AG-DVX100E,
AG-DVX100A,
AG-DVC80,
AG-DVC30
AL-LS,
Light Source, the
dimmer module for
Aladin and DigiFOX.
RMB,
Holder for the receiver on
15mm support rods.
Components
Article no.
DigiFOX, System complete, as shown
DF-401
DigiFOX 457 MHz, System complete for 1.5 Volt D-cells
DF-401-US
Accessories
Holder for the receiver on 15mm support rods
RMB
Digital Motor by Heden, suitable for 15 & 19mm rods mount
vertically, with all gear drives modules 0.8, 0.6, 0.5, 0.4.
M26VE
Digital Motor by BTM, same fittings as with Heden
BTM7
Motor cable, Lemo plug, 8-pin, motor on DigiFOX or Aladin
AMOTD
Dimmer module, 12V / max. 75 W, incl. cable (see AL-LS-X)
AL-LS
Dimmer cable, XLR 4-pin plug for power supply, Lemo 7-pin
for receiver motor connection, Lemo 3-pin for dimmer
AL-LS-X
module. (Spare part, included with the dimmer module)
Accessories such as mountings, power supply cables with and without
start/stop transmission are available for all film and video cameras.
An overview can be found on the pages 68 & 69.
Page 67
ALADIN MARK II
Aladin Mark II main features:
The automatic remote
lens control system
-
Aladin is the user-friendly remote control.
Carry out automatic calibration of the lens parameters at the
beginning of shooting – switch off, reconfigurate or change the
battery – switch on again and resume the shooting. All settings
are done through menus and push button or joy stick. The
OLED colour display still operates at -20°C/-4°F. These
advantages are especially appreciated in practice.
The interfaces:
- 8 motor controllers
- USB port, 2 sockets
- 2 serial interfaces
- time code in (LTC)
- camera start/stop
- BNC out for wireless
or cable
-
Control signals are transmitted as digital data packages in the 434 / 869 MHz band
safely and precisely with 18-bit resolution.
Suitable for many motors with digital incremental encoders such as Heden M26VE,
Scorpio SB92, Preston DM2, Betz Tools BTM7.
Unique - adjustable back-lash compensation - eliminates play!
Controls in S3D mode 8 motors, synchronously two cameras’ Iris, focus and zoom,
automates the rig setting for angulation (convergence), IA (inter axial distance)
and communicates with Sony MPE 200.
Controls digital Canon and Fujinon lens motors directly through the 2 auxiliary
ports, if required synchronously, too.
USB port for meta data recording, software update and lens-, rig-data handling.
2 serial interfaces for PC interaction
Controls the dimmers Aladin Light Source (AL-LS) and Colibri, the DMX
dimmer/receiver (FD-400E).
Excellent safe transmission distance* inside through thick walls and outside with
metal structures, better performance than transmission in the GHz-range offers.
ON/OFF or start/stop recording function integrated for all suitable cameras.
With “Electronic Gear” for free selection of the translation between the hand wheel
movement and the reaction at the lens (spreading).
Memory of last settings after switch off for quick resumption of operation.
Wide supply-voltage range from 10 to 34 volts for the motor controller (receiver).
Power is stabilized and adjustable in 5 steps. Powerful performance for the motors
also with low supply. The torque will be automatically adjusted during calibration.
Modular design, each individual function can be combined into one transmitter
through simple assembly. Here, too, all the last individual settings are saved.
Reverse direction of the motor rotation is adjustable on the hand-units
(transmitters) and on the receiver / motor controller.
A LED column shows the position of the zoom.
Lowest energy consumption of the hand-unit(s), a battery usually lasts for the
entire day of shooting.
16 channels selectable for the transmission by push of a button. RF Spectrum
analyzer to find the best channel for transmission and optical feedback that both
units work on the same one.
Adjustable fluid damping for the focus hand wheel.
Emergency feature: Transmission by connecting transmitter and receiver using a
standard video cable with BNC plugs.
* Achievable distance dependent on the structural conditions at the set.
Page 68
ALADIN MARK II
The automatic LCS.
Mountings for
19 and 15 mm
rods available.
550-MA,
articulated arm for
receiver
3310 (15mm)
3320 (19mm)
rod clamps with ¼“
and 3/8“ threads.
Motor complete,
for 15 and 19mm
rods as well as with
all lens gear wheels.
AL-RKE
Universal rod clamp.
Components
Aladin 2+
Two channel design for focus and iris + camera start/stop. Contains
hand-unit with transmitter, scale-ring, 2 NiMH batteries, charger,
receiver with outputs for eight motors, 2 antennas and instructions.
Includes S3D functionality for focus, iris, IA and angulation.
Aladin 3+
Three channel design for focus, iris and zoom + camera start/stop.
Other equipment as described above, receiver with outputs for eight
motors. Includes full S3D functionality.
Aladin Zoom Control
Separate unit for control of the zoom rings. Contains hand-unit with
transmitter, 2 NiMH batteries, charger, receiver with outputs for eight
motors, 2 antennas and instructions. Includes S3D functionality for
Zoom.
Accessories
Motor with incremental encoder, digital from Heden
Motor with incremental encoder, digital from Bez Tools
Connector cable between motor and receiver with Lemo 7-pin plugs,
one angled, one straight. Length 60 / 100 cm
Articulated arm for receiver, 2 threads ¼“
Rod clamp with ¼“ and 3/8“ threads for 15mm rods
Rod clamp with ¼“ and 3/8“ threads for 19mm rods
Holder for the receiver on 15mm support rods
Aladin universal rod clamp with jacks and contact plugs
Aladin dial illumination, LED light with flexible arm
Graduated ring for focus unit
Light Source, dimmer for tungsten lights up to 75 W, for connection
to a free motor output, complete with cable set
Article no.
AL2-3-401
AL2-4-401
AL2-Z-401
M26VE
BTM7
AMOTD60/100
550-MA
3310
3320
RMB
AL-RKE
SI
SC
AL-LS
Accessories such as rod clamps and mountings, power supply cables with and
without start/stop transmission are available for all film and video cameras.
An overview can be found on the pages 69 – 71.
RMB,
Holder for the
receiver on 15mm support rods.
Page 69
Overview – Accessories and cables for the remote control systems.
Accessories DigiFOX
Accessories ALADIN / ALADIN MK II / DigiFOX
FMB
EU15-82
Extension unit Ø 15:15mm (without rod, length distance between holes 82mm)
EU19-82
Extension unit Ø 19:15mm (without rod, length distance between holes 82mm)
NiMH battery for FOX, rechargeable 6V/600mA
Accessories ALADIN
AL-BAT
AL-CH
AL-CP
NC battery for Aladin, rechargeable
Charger with adapter for Aladin battery, 100-240V
Config. Dummy Plug for Aladin external iris, spare part
DigiFOX cable for Panasonic DVX100 / HVX200(P2)/ and any other models
DFMPVX
combi-cable: controls internal focus motor for Panasonic DVX/HVX and with start/stop
function. 2.5mm stereo and 3.5 mm stereo jack 4-pin -to DigiFOX Hirose 12-pin. For
power supply of DigiFOX receiver, an additional cable is required. (e.g. XLR4-AL)
AL-HWA
Aladin/II Hardwire Adapter for external iris, cable-length 3m
AL-HWA-Z
Aladin Hardwire Adaptor for Zoom, cable length 1m (cable-connection
instead of battery, in combination with AL-RK)
AL-Fi
Aladin/II Focus/Iris hand-unit, spare part
AL-i
Aladin/II External Iris hand-unit with Dummy Plug
AL-i-DMX
Aladin External Iris with DMX input for light control, with Dummy Plug
AL-MOTC
AL-MCA7
Aladin MC Board for digital motors, spare part
Assembly Clamp (01841 MCA-7) for Aladin Pan Handle Adapter
AL-PHA
Pan Handle Adapter for Aladin (for mounting using clamp AL-MCA7)
AL-T400
Aladin Transceiver module with antenna (433-434 MHz,
16 channels)
DigiFOX cable, camera start/stop in connection with combi-cable DFPMx for internal focus motor
AL-Z
Aladin Zoom hand-unit
DFCOF4C
cable for start/stop when using the cable DFPMCx for Canon
DFCOF4F
cable for start/stop when using the cable DFPMF for Fujinon
Focus motor, Hirose 12-pin - for DigiFOX Hirose 4-pin
DigiFOX cable, combined for power supply and for internal focus motor
DFPMCD
combi-cable: power supply / motor control internal focus motor Canon digital Hirose
20-pin – to DigiFOX Hirose 12-pin
DFPMCA
combi-cable: power supply/ motor control internal focus motor Canon analogue Hirose
6-pin - to DigiFOX Hirose 12-pin
DFPMF
combi-cable: power supply / motor control internal focus motor Fujinon Hirose 12-pin to DigiFOX Hirose 12-pin
When using the above-mentioned combi-cable and at the same time, the camera’s remote control
start/stop function, please use the following special DFCOF4x cable.
lens with focus motor, Canon-plug 8-pin - for DigiFOX Hirose 4-pin
Accessories ALADIN / ALADIN MK II / DigiFOX
FANT
Antenna (straight) for transmitter (FOX, ALADIN transceiver)
FANTR
RMB
RMB-IP
401-10
SC
Antenna (angled) for receiver (FOX, ALADIN Motor Controller)
Holder for attaching the receiver to 15mm rods
Steel intermediate plate, with threads for RMB
Adapter for RMB on bridge plate with Ø19mm rods
Graduated ring for focus hand wheel
Si
EU15
EU19
Light for Scale Illumination, (LED) for Aladin and DigiFOX
Extension unit Ø 15:15mm, with rod Ø 15mm
Extension unit Ø 19:15mm, with rod Ø 15mm
EU15-60
Extension Unit Ø 15:15mm (without rods, length distance between
holes 60mm)
DigiFOX cable, camera Start/stop – when using the power supply cables on the Hirose 4-pin jack
DFCOFV-V
Start/stop cable DigiFOX Hirose 12-pin – directly on the video camera on Hirose 12pin (Please note: differing pin assignments!)
DFCOFV-C
Start/stop cable DigiFOX Hirose 12-pin - over lens Canon 8-pin
DFCOFV-F
Start/stop cable DigiFOX Hirose 12-pin - over lens Fujinon Hirose 12-pin (Please note:
differing pin assignments!)
DFCOFAA2
Start/stop cable DigiFOX Hirose 12-pin - Aaton camera, Lemo 2-pin FFA.0S.302
Overview – Cable for ALADIN MARK II / DigiFOX.
Page 70
DigiFOX cable, camera start/stop – when using the power supply on the
Hirose 4-pin jack, continued.
ALADIN MARK II cable, combined for power and camera start/stop
DFCOFAA6
AA-A2-P/cam
DFCOFMOV
DFCOFPAN
DFCOFA
DFCOFA-M
DFCOFR1
Start/stop Cable DigiFOX Hirose 12-pin Aaton camera Lemo 6-pin
FGG.1B.306
Start/stop cable DigiFOX Hirose 12-pin - Moviecam Compact Fischer 2-pin
S102AO51
Start/stop cable DigiFOX Hirose 12-pin - Panavision Lemo 10-pin FFP.2S.310
Start/stop cable DigiFOX Hirose 12-pin - ARRI 12V Fischer 11-pin
S104AO056
Start/stop cable DigiFOX Hirose 12-pin - ARRI, Moviecam SL, Pro35 Adapter
Fischer 3-pin S102AO52
Start/stop cable DigiFOX Hirose 12-pin - RED One camera Lemo 4-pin (0B;
upper AUX-out jack in standard setting)
ALADIN MARK II cable, camera start/stop
Arri-A2-P/cam
RS-A2-P/cam
PAN-A2-P/cam
Combi -Cable: Power + camera-Start/Stop Aaton camera-6 pol Lemo,
45cm/17.7" – for Aladin2 Lemo 5 pol
Kombi-Cable: Power + camera-Start/Stop ARRI Kamera-12V 11pol Fischer,
45cm/17.7" – for DigiFOX / Aladin Hirose 4pol
Kombi-Cable: Power + camera-Start/Stop ARRI/Moviecam SL Kamera-24 Volt 3
pol Fischer, 45cm/17.7" – for Aladin2 Lemo 5 pol
Kombi-Cable: Power + camera-Start/Stop Panavision 10pol Lemo, 60cm/23.7" –
for Aladin2 Lemo 5 pol
ALADIN MARK II cable, only for power supply
AB-AL2
Power Cable 12 Volt D-Tap – for Aladin2 Lemo 2 pol
MovC- AL2
Power Cable Moviecam Compact 24V, 2pol Fischer - for Aladin2 Lemo 2 pol
AL2-COFA
Start/Stop Cable ALADIN2, 5 pol Lemo - ARRI 11pol Fischer
PanMill-AL2
Power Cable Panavision Millennium 24V, Lemo 2pol – for Aladin2 Lemo 2 pol
AL2-COFAA2
AL2-COFAA6
Start/Stop Cable ALADIN2, 5 pol Lemo - Aaton 2pol
Start/Stop Cable ALADIN2, 5 pol Lemo - Aaton 6pol Lemo
PRO-AL2
RIG-AL2
Power Cable PRO / ARTEMIS 12V, Lemo 4pol – for Aladin2 Lemo 2 pol
Power Cable RIG 12V, Lemo 3pol - for Aladin2 Lemo 2 pol
AL2-COFA-M
Start/Stop Cable ALADIN2, 5 pol Lemo - ARRI SR III, 535 + Moviecam SL +
Pro35 Adapter - 3pol Fischer
Start/Stop Cable ALADIN2, 5 pol Lemo - Moviecam Compact 2 pol Fischer
STM-AL2
Power Cable Steadicam Master 12V, Lemo 2pol- for Aladin2 Lemo 2 pol
STU-AL2
Power Cable Steadicam ULTRA 24V, Lemo 3pol – for Aladin2 Lemo 2 pol
Start/Stop Cable ALADIN2, 5 pol Lemo - Panavision Lemo 10 pol
MKV-AL2
Power Cable MK-V – for Aladin2 Lemo 2 pol
Start/Stop Cable ALADIN2, 5 pol Lemo - Video Canon lens 8 pol
XLR4-AL2
Power Cable 12V/24V XLR 4pol – for Aladin2 Lemo 2 pol
Start/Stop Cable ALADIN2, 5 pol Lemo - Video Fujinon lens Hirose 12 pol
(Achtung: unterschiedliche Belegung!)
Start/Stop Cable ALADIN2, 5 pol Lemo - direct on video camera with Hirose
12 pol (Attention: different pin configuration!)
Start/Stop Cable ALADIN2, 5 pol Lemo - RED camera-Lemo 4pol (0B; upper
AUX-out connector in standard setting)
BP90-AL2
Power Cable 12 Volt BP 90 plug PAG Lok-on – for Aladin2 Lemo 2 pol
AL2COFMOV
AL2COFPAN
AL2-COFV-C
AL2-COFV-F
AL2-COFV-V
AL2-COFR1
ALADIN MARK II cable, for Light Source (Aladin System always with DMX Iris)
AL-LS-X
Dimmer Cable with XLR 4 pol for 12V power-in, Lemo 7pol to receiver motor
socket, Lemo 3 pol to Dimmer (spare part)
Page 71
Overview – Special Cable for ALADIN MARK II
ALADIN MARK II special cable
AL2-CD-AX2
ALADIN MK II Control Cable + power for digital ENG lenses
from Canon, 7-pol. Lemo - Hirose 20 Pin
AL2-CD-AX1
ALADIN MK II Control Cable for digital ENG lenses from
Canon, 10-pol. Lemo - Hirose 20 Pin
AL2-FJN-AX1
Funjinon, 10-pol. Lemo - Hirose 10 Pin
AL2-FJN-AX2
Funjinon, 7-pol. Lemo - Hirose 10 Pin
AL2-SER-TX-1
ALADIN MKII serial cable between transmitter and receiver,
7-pol. Lemo - 10-pol. Lemo
AL2-SER-TX-2
ALADIN MKII serial cable between transmitter and receiver,
7-pol. Lemo - 7-pol. Lemo
AL2-PC-AX1
ALADIN MK II PC Control Cable, 10-pol. Lemo- SUBD 9-pol.
AL2-PC-AX2
ALADIN MK II PC Control Cable, 7-pol. Lemo- SUBD 9-pol.
AL2-HDC-AX1
ALADIN MK II Control Cable receiver Sony Trunk Connector
out on camera, 10-pol. Lemo- Tajimi 12-pol.
AL2-HDC-AX2
ALADIN MK II Control Cable receiver Sony Trunk Connector
out on camera, 7-pol. Lemo- Tajimi 12-pol.
AL2-CCU-TX
ALADIN MK II Control Cable Sender, Sony Trunk Connector
on CCU, 7-pol. Lemo- Tajimi 12-pol.
Page 72
Collimation: Autoreflex and CamCollimator. Measuring at ∞
Two types are available.
For daily use in film and video equipment rentals and service, the
CamCollimator preferable because the user is not dependent of the
individual observation and delivers objective, precise measurement values
quickly and simply. With this time-proven process, the sharpness of the
picture is no longer the adjustment criteria, but rather the symmetrical
position of a simple beam between a double bar.
1
Universal CamCollimator with the optional second
sliding plate for quick camera check
Autoreflex Collimator, measuring with a Siemens star
back focal length
too little
correct
too much
sharpness is lying
sharpness is lying
in front of image plane
behind image plane
The Universal CamCollimator is available now in a new compact version.
Optionally it can come with a second sliding platform for checking cameras
without conversions. The base unit comes with one platform which holds a
lens or a camera. The autocollimator holder can slide, swivel and is mounted
on a spindle drive for height adjustment to measure the back focal length on
cameras and lenses.
The set up (1000 mm only) is much more compact in structure then the
previous optical bench, offers a significant reduction in weight, space needs
and results in an optimal price/performance ratio.
A LED illumination, colour selector for green and white, camera, LCD monitor
and plane glass are included. Lens mount adaptors are selected as required.
The classical Autoreflex Collimator with eyepiece and Siemens star is
recommended if there is a limited budget and measurements must only be
taken occasionally. As using the same optical bench with height adjustability
cameras can also be measured in addition to lenses.
Page 73
Collimation: Autoreflex and CamCollimator. Measuring at ∞
Beam Converter
For F 4-19 mm wide
angle check (2/3“
HDTV format).
It amplifies the light
by 15 times for a
crisp image on the
monitor.
Components
Universal CamCollimator
Reading accuracy of the micrometer: 0.001mm
•
Collimation unit Mark III 45S, mounted on an adjustable carrier
•
Focal length range: 6-300mm
•
cold light source with high power LED (7x3.5W, 380lm, 50,000h) and fibre
Focal length comparison:
optics. Power supply 90 – 260 V, 47-63 Hz
B4 [mm] >> PL [mm]
•
Steel rods, stainless steel, L=1.0m
4
10
•
1 sliding platform with the lens gauge block including digital micrometer
6
13
•
Hight adjustable, sliding lens support
19
42
•
LCD monitor mounted with an articulated arm
50
109
•
CCD-camera (black / white) with C-mount
100
218
•
Combined power supply for camera and monitor (100 – 240 V, 50 – 60 Hz)
•
Eyepiece, for visual observation
•
Plane glass in a case
Carrier for collimation unit,
•
Pupil
with 53 mm thread for the amplifier – beam converter
adjustable
•
Option: 2. platform C-LCC-P2 with integrated lens support
Collimation Unit
and fibre optics
of the
CamCollimator
Autoreflex Collimator,
The reading accuracy of the micrometer: 0.001mm.
Focal length range 5mm-300mm.
Includes: Siemens star as a reticule plate; collimating telescope F300, ∅ 65mm,
Measurement range 2° (Option: collimating telescope F140, ∅ 40mm,
Measurement range 4°; adapter ∅ 65 to 40mm); Illuminator with power supply
110 - 240V; Steel rods, stainless steel, L=1m; sliding platform for camera or with
the gauge mounting block incl. digital micrometer; sliding lens support.
Article no.
C-LCC
C-CTB
Mountings for photo, film and video formats can be found on the overview page 75
Page 74
Projection: Test-Projector MK5 for all esablished formats.
Projector with lens mount
and 19mm support rods.
The new projector MK5 offers even more precision than its
predecessor.
The guide block for slide holder, produced for us by the specialist
Schneeberger, now has a length of 53 mm almost twice the capacity as
the previous model. Therefore: Over the entire sliding range the sled is
guided 100%. In order to ensure that the entire tolerances remain in the
μ-range and by this become irrelevant for precise measurement of the
lens, the entire unit is again centred and parallelized after its assembly
by using a CNC machining centre.
Mounts with glass way for SD and HD video as well as the different photo
and cine lenses are available.
We recommend the remote control because it makes it possible to be
near the projector screen at an optimal distance to focus the picture.
Technical data, scope of delivery:
- Gauge with scale gradations 10µm
- Plane Glass, mounted in slide holder
- Eclair C-Mount as base mount for all others
- Low voltage orientation lamp on goose neck
- Halogen lamp with 150 W
- Mains supply switchable 120 / 240 V AC
- Adjustment range for measurement of the
back focal length: ± 1.3mm
Test-slide
precisely
mounted.
Remote control for motorised
focussing, also for earlier models.
Components
Article no.
Test-Projector MK5
P-TP5
Accessories
Test slide cine, 35mm and S16 format indicators
P-TCF
Test slide video, SD and HD format indicators
P-TCHD
Remote control, cable-connected, cable length according to choice
P-RC
Laser pointer, projects a dot for centre control of zoom lenses
P-LP
Adapter for 19mm support rods
401-10
Lens mountings and calibration aids for photo, film and video can be found on
page 75. These are likewise usable for collimation and projection.
Page 75
Lens mountings for collimation & projection.
Mountings for collimation and projection
Components Cine
Mount for Aaton
Mount for Arriflex PL
Mount for Arriflex standard - bayonet
Mount for Panavision
Mount for BNCR connection
Mount for C connection
Components Video SD
Chip
Ikegami mount with glass way 2/3"
B4 mount with glass way
2/3"
(Sony, Hitachi, JVC, Panasonic, Thomson, etc.)
Sony mount with glass way
BTS mount with glass way
Components Video HD
B4 mount with glass way
(Sony, Hitachi, JVC, Panasonic, Thomson, etc.)
Article no.
C-AAA
C-APL
C-ASTB
C-APA
C-ABNCR
C-ACM
bfl mm
76.94
65.24
1/2”
1/2”
Chip
52.71
50.45
bfl mm
2/3”
65.03
B4 mount with glass way for Zeiss
2/3”
65.06
Mount with glass way
1/3”
41.99
Components Photo KB (35mm still photography)
Mount for Canon EF
Mount for Leica M & R
Mount for Nikon
Mount for Olympus
P-VMI
P-VMS
P-VMS12
P-VMBTS12
P-VMHD
P-VMZ
P-VM13
P-FMCEF
P-FMLM/R
P-FMN
P-FMO
Measurement cylinder (±3µm) with gauge (scale gradations 10µm)
Measurement
Measurement
Measurement
Measurement
Measurement
cylinder
cylinder
cylinder
cylinder
cylinder
for
for
for
for
for
ENG SD
Sony SD
BTS SD
HDTV
HDTV
2/3"
1/2"
1/2"
2/3”
1/3”
A variety of mountings are available ex stock, others can be
produced according to the customer’s requirements.
65.24mm
52.71mm
50.45mm
65.03mm
41.99mm
C-MBENG
C-MBS12
C-MBBTS12
C-MBHD
C-MB13
Measurement cylinder for
PL
Canon EF
Nikon F
52.00 mm
44.00 mm
46.50 mm
Selected accessories for the CamCollimator
Beam Converter, light amplifier for the measurement of wideangle lenses 4-19mm
Adapter for Beam Converter on older collimators
2-metre converter, for measurements at a distance of 2 m
Selected spare parts for the CamCollimator
CCD-camera MT 012 B/W, incl. power supply and C-mount
Plane glass in the case for all collimators (Ø 63mm)
bfl = back focal length
C-MBAPL
C-MBEF
C-MBNF
Article no.
C-BCWA
C-BCWA-01
C-ATT2m
CCD-LCTB
C-PPG
Page 76
MTF Star – MTF analysis by the click of a mouse.
An extension for the projector.
A new and unique way to analyse lens quality.
The MTF Star Sensor and MTF Star software offer a new and unique
way to analyze optical performance. Together they turn any
Chrosziel projector into a powerful MTF and color aberration
evaluation tool.
Developed through a partnership between IB/E and Chrosziel, the
MTF Star allows you to perform visual projection tests and view the
results electronically in the form of pictures, graphs and tables. The
data can then be saved for future reference, shared remotely with
colleagues as pdf files, printed and kept with the lens as protocol,
or used for presentation and comparison.
The system offers:
- objective measuring of MTF and lateral color aberration
according to EBU Tech 3249
- reports of all results in the form of tables and graphs
- visual evaluation
- convenient workflow and evaluation of results at the work station
New measuring method (patent pending)
Previous measuring procedures were based solely on visual inspection. A line structure on a test chart
designed for the resolution of the intended format was projected and scanned by a sensor. The
resulting MTF value was displayed as a percentage of the maximum resolution required by the format.
The test chart had line structures for both SD and HDTV resolutions.
The MTF Star uses a totally different and unique method. A camera with a lens optimized for very close
field is focused on a projected Siemens star, whose size may vary from approximately 12 to 24mm
(maximum). The difference in star sizes – from the original test chart to the projected size – makes
the task of sensing resolution very easy with the handheld MTF Sensor. To measure a resolution of 100
lp / mm, the sensor only has to resolve 1 lp/mm. Even skeptics will admit this is a doable task.
The components:
MTF Star Software,
Dongle,
MTF Star Sensor,
MTF Star Test Slide and
MTF Star Adjustment Aid.
Complete System-Art. No.: P-MTF-100
Page 77
MTF Star – MTF analysis by the click of a mouse.
An extension for the projector.
A new and unique way to analyse lens quality.
The
computer displays the picture being
measured, the digitized Siemens star of the
measured position, as graphs the lateral color
error and the MTF value between 20 to 100
lp/mm. In the pdf reports additionally a table is
printed with individual MTF values of white, red,
green and blue for 20 to 100 lp/mm in steps of
5. For selection between quick reference and
deeper analysis the user may select “white only”
and “RGB”. In selection “white” the software
averages the RGB values into one value.
Test slides for all HDTV formats and film / digital
cinematography are available.
More functions:
-
Automated reporting of guided measurement
When a lens is checked horizontally and diagonally at various positions, the program
guides the user through the procedure. The report shows a table and graph of all
measurement results; however, each value can also be displayed individually. Several
measurement procedures come preset within the MTF Star: the EBU standard,
“CROSS ONLY”, “DIAGONAL ONLY”, AND “CROSS DIAGONAL”. More procedures can
be defined by the user. For example, a QUICKCHECK could be established for the
routine measurement of only 4 critical positions.
-
view white and individual R, G, B
separations
camera live view displayed before screen
grab
select between quick, single use and
guided measurement
overlay resolution marks on the digitized
picture for visual inspection
one click on each picture or graph for full
screen display
one click to start analysis
automatic storage of results and display
of hard disk free space
Chrosziel GmbH
Klausnerring 6
D-85551 Kirchheim b. München (Munich)
Germany
Phone +49 89 90 10 91 0
Telefax +49 89 44 70 86 1
E-Mail [email protected]
Web www.chrosziel.com

Product Catalogue 2012 Schneider Optics, Inc.

Transcription

Similar documents

Equipment/ Verleihliste INDIEVISUALS lawrencerichards

2014 cinema and photo products catalog

chrosziel 456-20 matte box configuration chart