Section 8: REAR SUSPENSION - TOYOTA

Transcription

V
o
l
u
me
1
_
A
C
C
E
S
S
O
R
I
E
S
S
e
c
t
i
o
n8
REAR SUSPENSION:
TOYOTA | FORD | NISSAN |UNIVERSAL
CHAOSFAB.COM
9517379682
TABLE OF CONTENTS: CLICK THE LINKS BELOW
REAR SUSPENSION
TOYOTA
COMPONENTS
3
FORD
COMPONENTS
15
NISSAN
COMPONENTS
16
UNIVERSAL
COMPONENTS
17
3
REAR SUSPENSION
TOYOTA ACCESSORIES
U-BOLT RELOCATION PLATES (TOYOTA PICKUP / TACOMA 84-04)
Part # 40020
Kit Includes:
(2) U-BOLT PLATES
BOLT-ON
MSRP:
$84.03
Features / Benefits:
• Intended to be installed with 2.5" wide
after market leaf springs mounted under the rear axle.
• Recesses leaf spring pin into plate to prevent shifting.
• Designed to protect u-bolt nuts.
Click Here: Images & Additional Product Info
FRONT SPRING HANGERS (96-04 TACOMA)
Part # 40060
Kit Includes:
(2) WELD-ON HANGERS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$131.83
• Laser cut brackets weld to frame and include grade 8 hardware.
• Developed to relocate front spring hangers for leaf spring conversions.
• Designed to use 2.5" aftermarket leaf springs.
• Grinding and welding are necessary to install.
4
REAR SUSPENSION
TOYOTA ACCESSORIES
FRONT SPRING HANGERS (96-02 4RUNNER)
Part # 40060
Kit Includes:
LASER CUT BRACKETS (PR)
GRADE 8 HARDWARE
WELD-ON
MSRP:
$131.83
FRONT SPRING HANGERS (84-95 TOYOTA PICKUP)
Part # 40062
Kit Includes:
LASER CUT BRACKETS (PR)
GRADE 8 HARDWARE
WELD-ON
MSRP:
$131.83
5
REAR SUSPENSION
TOYOTA ACCESSORIES
FRONT SPRING HANGERS (84-95 4RUNNER)
Part # 40062
Kit Includes:
(2) WELD-ON HANGERS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$131.83
Part # 48623F
2.0" REAR BUMP STOP KIT [FOX] (05+ TACOMA PRERUNNER/ 4WD)
Kit Includes:
BOLT-ON FOX AIRBUMP MOUNTS
LOWER STRIKE PAD & HARDWARE
GRADE 8 HARDWARE
BOLT-ON
MSRP:
$420.16
• 100% bolt on bump stop bracket mount to the factory
bolt holes and replaces the factory bump stop.
• Utilizes 2.5" travel FOX 2.0" diameter bump stops.
• Increases handling and performance on and off road when
weight has been added to the bed of the truck.
• Cushions harsh bottom outs.
• Includes lower strike pad that bolts to the factory U bolt location.
• Note: Wheel spacers required.
6
REAR SUSPENSION
TOYOTA ACCESSORIES
Part # 48623K
2.0" REAR BUMP STOP KIT [KING] (05+ TACOMA PRERUNNER/ 4WD)
Kit Includes:
BOLT-ON KING AIRBUMP MOUNTS
GRADE 8 HARDWARE
BOLT-ON
MSRP:
$472.68
• 100% bolt on bump stop bracket mount to the factory
bolt holes and replaces the factory bump stop.
• Utilizes 2" travel KING 2.0" diameter bump stops.
• Increases handling and performance on and off road
when weight has been added to the bed of the truck.
• Note: Wheel spacers required.
LOWER LINK SKIDS (03-09 4RUNNER)
Part # 48650
Kit Includes:
3/16" MILD STEEL SKIDPLATES
GRADE 8 HARDWARE
BOLT-ON
MSRP:
$105.03
• 100% Bolt on.
• Grade 8 - 9/16" mounting hardware is included.
• Laser cut pre bent 3/16" mild steel brackets.
• Compatible only with TC or stock links.
• Can be welded on for maximum protection.
7
REAR SUSPENSION
TOYOTA ACCESSORIES
Part # 49623K
2.0" REAR BUMP STOP KIT [KING] (96-04 TACOMA)
Kit Includes:
WELD-ON KING AIRBUMP MOUNTS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$393.75
• Utilizes 2.5" travel KING 2.0" diameter bump stops.
• Same equipment that is being used in military
applications with 8000lb armored vehicles.
• Increases handling and performance on and off road.
• 1.25" wheel spacers must be installed.
• Grinding and welding are required for installation.
• Weld on bump stop bracket indexes above and below the frame for maximum strength.
TUNDRA REAR LOWERING SHACKLES (00-06 TUNDRA)
Part # 49702
Kit Includes:
(2) SHACKLES
(4) BUSHINGS
(2) INNER SLEEVES
BOLT-ON
MSRP:
$198.53
• 100% bolt on.
• Lowers rear suspension 3/4" & improves handling.
• Reuses factory hardware.
• Includes urethane bushings and inner sleeves.
• For use with stock or after market leaf springs.
• Required when doing an under axle leaf spring conversion.
8
REAR SUSPENSION
TOYOTA ACCESSORIES
2007 + TOYOTA TUNDRA 3/4" LIFT SHACKLES
Part # 49704
Kit Includes:
(4) 3/8" THICK STEEL SHACKLES
14MM HARDWARE
BOLT-ON
MSRP:
$131.30
• 100% Bolt on.
• Hardware included.
• Compatible with factory or aftermarket Deaver leaf springs.
• Laser cut 3/8" steel shackles lift the rear of the Tundra 3/4" over stock.
CHROMOLY ADJUSTABLE REAR LINKS (03+ 4RUNNER)
Part # 86400
Kit Includes:
(2) UPPER LINKS W/ BUSHINGS
& GREASE ZERK FITTINGS & 7/8" HEIM JOINTS
(2) LOWER LINKS W/ BUSHINGS
PAN-HARD BAR W/ 3/4" HEIM'S
MIS-ALIGNMENT SPACERS
BOLT-ON
MSRP:
$1353.97
• 100% Bolt on.
• Includes urethane pivot bushings.
• Hi-misalignment spacers are included.
• Constructed from 1 1/4" .375 wall 4130 chromoly tubing for maximum strength.
• Offers 1.5" more droop travel over stock when longer shocks are installed.
• Upper, lower and pan hard bars are designed to incorporate a heim joint making the entire rear link system length adjustable.
9
REAR SUSPENSION
TOYOTA ACCESSORIES
MID TRAVEL REAR- TACOMA SPRING UNDER CONVERSION
Part # 86450
Kit Includes:
SHACKLES WITH BUSHINGS & INNER SLEEVES.
GUSSETED U-BOLT PLATES.
WELD ON SPRING PERCHES.
BUMP STOP RELOCATION MOUNTS
WELD-ON
MSRP:
$575.00
• Increase suspension up travel for a smoother ride quality, and
maximize articulation and comfort while off road.
• TOTAL CHAOS designed this kit to offer a light duty or heavy duty
specific spring pack from Deaver Leaf Spring.
• Welding is required for this installation.
• Wheel travel with custom shock mounts- Capable of 12"
• Wheel travel specs: Wheel travel with stock mounting location shocks- 9.5"
• Light weight springs are intended for trucks that will not regularly have added bed weight.
• Heavy duty springs are designed for trucks with regular heavy loads such as camper shells,
motorcycles, bed racks and equipment.
• Eliminate driver side bed sag on your Tacoma. Deaver now offers a driver & passenger side specific rear leaf spring.
Driver side spring has additional arch to level the truck.
• Retain factory rear shock mounts. Custom shock mounts can be installed to maximize wheel travel.
• Prerunner model Tacoma's will require drive line modifications. Adding a slip yoke on the front end is necessary.
• Designed to work with factory rubber bump stops or the TOTAL CHAOS 2.0 bump stop system for FOX & KING.
• Wheel spacers must be installed to use stock wheels with the TC air bump or custom rear shock mounts built off the outer frame rail.
Part # DVR- 05TACOMIDHD
Part # DVR- 05TACOMIDLD
DEAVER SPRINGS - HEAVY DUTY
DEAVER SPRINGS - LIGHT DUTY
Kit Includes:
LEAF SPRINGS
BUSHINGS
INNER SLEEVES
U-BOLTS
WELD-ON
MSRP:
$984.50
10
REAR SUSPENSION
TOYOTA ACCESSORIES
07+ TUNDRA REAR SHOCK MOUNT KIT & LEAF SPRING CONVERSION
Part # 87400
Kit Includes:
SHACKLES & HARDWARE
WELD-ON UPPER & LOWER SHOCK MOUNTS
GUSSETED U-BOLT PLATES
BOLT-ON UPPER JOUNCE SHOCK MOUNTS
WELD-ON BUMP STOP STRIKE PAD
EXTENDED STAINLESS STEEL BRAKE LINES
WELD-ON
MSRP:
$1784.63
• Weld on upper shock mount brackets mount under the bed.
• Leaf springs bolt to factory front spring hanger location.
• Cutting, welding and grinding is required to install.
• Maximizes rear suspension wheel travel without drilling holes in the bed.
• Under the axle Deaver leaf spring conversion is designed to use 2.5" 2-tube bypass shocks.
• TC bolt on Jounce bump stop frame bracket replaces factory rubber bump stop mounts. Weld on Lower strike pad is included.
• TC extended shackles, weld on upper shock mounts, weld on lower shock mounts, u-bolt plates, extended brake line,
weld on strike pad for Jounce bump stops, TC bolt on Jounce bump stop mount, & hardware is included.
Not Included: Deaver leaf springs, bushings, inner sleeves, u-bolts, shocks, Jounce bump stops, shocks or wheel spacers.
11
REAR SUSPENSION
TOYOTA ACCESSORIES
Part # 49623F
2.0" REAR BUMP STOP KIT [FOX] (96-04 TACOMA)
Kit Includes:
WELD-ON FOX AIRBUMP MOUNTS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$341.38
• Utilizes 2.5" travel FOX 2.0" diameter bump stops.
• Same equipment that is being used in military
applications with 8000lb armored vehicles.
• Increases handling and performance on and off road
• Grinding and welding are required for installation.
• Weld on bump stop bracket indexes above and below the frame for maximum strength.
12
REAR SUSPENSION
TOYOTA ACCESSORIES
CHROMOLY ADJUSTABLE REAR LINKS (96-02 4RUNNER)
Part # 96450
Kit Includes:
MIS-ALIGNMENT SPACERS
BOLT-ON
MSRP:
$1353.97
• 100% Bolt on.
• Hi-misalignment spacers are included. Reuses factory hardware.
U-BOLT RELOCATION PLATES (NISSAN HARDBODY / FRONTIER/ XTERRA 84-04)
Part # 40020
Kit Includes:
(2) U-BOLT PLATES
BOLT-ON
MSRP:
$84.03
13
REAR SUSPENSION
TOYOTA ACCESSORIES
LOWER LINK SKIDS (2007 + FJ CRUISER)
Part # 48650
Kit Includes:
(PR) LOWER LINK MOUNT SKIDS & HARDWARE
BOLT-ON
MSRP:
$105.03
• 100% Bolt on.
• Grade 8 - 9/16" mounting hardware is included.
• Laser cut pre bent 3/16" mild steel brackets.
• Compatible only with TC or stock links.
• Can be welded on for maximum protection.
CHROMOLY ADJUSTABLE REAR LINKS (2007 + FJ CRUISER)
Part # 86400
Kit Includes:
MIS-ALINGMENT SPACERS
BOLT-ON
MSRP:
$1353.97
• 100% Bolt on.
• Offers 1.5" more droop travel over stock when longer shocks are installed.
• Hi-misalignment spacers are included.
14
REAR SUSPENSION
TOYOTA ACCESSORIES
1996-2004 TACOMA REAR 2.0 SHOCK MOUNT KIT
Part # 49625
Kit Includes:
WELD-ON UPPER & LOWER SHOCK MOUNTS
INCLUDES HARDWARE
WELD-ON
MSRP:
$404.40
• Provides +3" of additional droop wheel travel and better ride quality.
• Maximizes articulation while navigating over obstacles.
• Outboard shock mounting location provides additional dampening control.
• Utilizes a 2.0" emulsion, reservoir or bypass shock from FOX or KING.
• Grade 8 hardware included.
• Compatible with the TOTAL CHAOS rear 2.0" bump stop kit. PT# 49623F/49623K
• 3/16" mild steel upper and lower laser cut shock mounts are included. Welding is required for installation.
15
REAR SUSPENSION
FORD ACCESSORIES
3/4" 2004+ FORD F-150 LOWERING SHACKLE
Part # 48502
Kit Includes:
LOWERING SHACKLES
URETHANE BUSHINGS & INNER SLEEVES
BOLT-ON
MSRP:
$209.03
• 100% bolt on.
3/4" 2010+ FORD RAPTOR LOWERING SHACKLE
Part # 48502
Kit Includes:
LOWERING SHACKLES
BOLT-ON
MSRP:
$209.03
• 100% bolt on.
16
REAR SUSPENSION
NISSAN ACCESSORIES
TITAN REAR LOWERING SHACKLES
Part # 49504
Kit Includes:
LOWERING SHACKLES
BOLT-ON
MSRP:
$194.32
• 100% bolt on.
U-BOLT RELOCATION PLATES NISSAN HARDBODY / FRONTIER / XTERRA 84-04)
Part # 40020
Kit Includes:
(2) U-BOLT PLATES
BOLT-ON
MSRP:
$84.03
17
REAR SUSPENSION
UNIVERSAL ACCESSORIES
Part # 40080F
Part # 40080S
WELD-ON REAR AXLE SHOCK MOUNTS (SPACING 1.5")
WELD-ON REAR AXLE SHOCK MOUNTS (SPACING 1.25")
Kit Includes:
(2) SHOCK MOUNTS
(4) SPACERS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$131.83
• Places lower shock eyelet 7" off of housing.
• Intended for 3" axle housings, can be ground to fit larger applications.
• Welding is required to install.
• Grade 8 hardware included.
• Laser cut 1/4" thick plates are pre welded with gussets that are designed to protect lower shock rod ends.
CHROMOLY TRAILING ARMS
Part # 49500
Kit Includes:
CHROMOLY TRAILING ARMS (PR)
NYLATRON BUSHINGS
WELD-ON
MSRP:
$2100.00
• 49.5" in length.
• Constructed out of 1/8" thick 4130 chromoly interlocking internal brackets.
• TC uses an 1 3/4" .120 bottom tube to connect the interlocking internal reinforcement plates.
• Lower shock mounts are intended to mount 2.5" coil over and 3.0" bypass shocks.
• Designed using 2.25" O.D. front pivots. Nylatron bushings are included for the front pivots.
• Rear mount features an 1 1/4" double pinch bolt threaded bung.
• Custom trailing arm mounts and upper links must be fabricated to install.
18
REAR SUSPENSION
UNIVERSAL ACCESSORIES (TOYOTA)
SHACKLE PIVOT GUSSETS (TOYOTA UNIVERSAL)
Part # 40450
Kit Includes:
(4) PIVOT GUSSETS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$47.79
• Designed to reinforce and strengthen the mounting location on top or below
the frame rail where TC 9" or 12" shackles have been mounted.
• Laser cut 10 gauge gussets are pre bent and notched ready to weld.
• Grinding and welding are necessary for installation.
• Note: Pivot not included.
9" CHROMOLY SHACKLES (TOYOTA UNIVERSAL)
Part # 40900
Kit Includes:
(2) SHACKLES W/ WELD ON SLEEVE & BUSHINGS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$314.07
• 4130 Chromoly tubing 9" long shackles.
• Custom fabrication is required for installation.
• Grade 8 hardware & urethane bushings are included.
• Designed to be installed with 2.5" wide leaf spring applications.
19
REAR SUSPENSION
UNIVERSAL ACCESSORIES (TOYOTA)
12" CHROMOLY SHACKLES (TOYOTA UNIVERSAL)
Part # 41200
Kit Includes:
(2) SHACKLES W/ WELD ON SLEEVE & BUSHINGS
GRADE 8 HARDWARE
WELD-ON
MSRP:
$314.07
• 4130 Chromoly tubing 12" long shackles.
• Custom fabrication is required for installation.
• Grade 8 hardware & urethane bushings are included.
• Designed to be installed with 2.5" wide leaf spring applications.
BOLT-ON CRAFTSMAN ALUMINUM JACK SKIDPLATE
Part # 44110
Kit Includes:
ALUMINUM JACK SKIDPLATE
BOLT-ON
MSRP:
$120.80
• Designed to assist mounting a jack to a truck bed or roll cage.
• Designed to fit a Craftsman aluminum racing jack only.
• CNC laser cut aluminum is prebent for ease of installation.

Section 8: REAR SUSPENSION - TOYOTA

Transcription

Similar documents

Where you come to know.

Honda Civic EG Race car The car was built from a very

VanVan 125 - Global Suzuki

Bestop Duster Cover

2015 Ford F-150 4Wd

rxc turbo order form

isuzu - Team-BHP

Click Here to load a PDF with ads and articles about the 1935

NB-180 NEWBURG

Jeep CJ 76-86 - Ironman Offroad