Complete Hurricane Section

Transcription

2016 Approved Hurricane Products
Product
Description
FBC
FBC
(Non-HVHZ)
(HVHZ)
TDI
Evaluation
IBC/IRC
Miami-Dade
NOA#
• Panels - Aluminum, Steel, Polycarbonate & Fabric:
2” .050 Aluminum
BERTHA™ Panel
FL 11964
DWG#: 15-045
SHU-124
DWG#: 06-171
DWG#: 13-056
2” 24 GA
Galvanized Steel
BERTHA™ Panel
FL 11964
DWG#: 15-041
SHU-109
DWG#: 08-006
DWG#: 13-057
2” Clear Panel
(TPS/EMS)
TPS: FL 6417
Pending: 15-2494
EMS: FL 15094
DWG#: 15-040
SHU-116
DWG#: 09-123
2-1/4” .040
Aluminum
BERTHA™ Panel
FL 11968
DWG#: 15-042
2-1/4” .050
Aluminum
BERTHA™ Panel
FL 11968
DWG#: 15-044
2-1/4” 24 GA
Galvanized Steel
BERTHA™ Panel
FL 11968
DWG#: 15-043
2-1/4” .030
Galvanized Steel
BERTHA™ Panel
TPS: FL6416
DWG#:
14-1509
DWG#: 03-155-1343b
12-0605.11
DWG#: 09-123
DWG#: 13-062
FL 11969
DWG#: 15-049
SHU-47
DWG#: 05-012
DWG#: 07-285
DWG#: 13-060
FL 11969
DWG#: 15-048
2-1/4” BERTHA™
Clear Panel
FL 11968
DWG#: 15-046
BERTHA™ Guard
Fabric Panel+
FL 13271
DWG#: 12-0222
SHU-168
DWG#: 13-048
DWG#: 07-230
FL 17661
DWG#: 15-3452
NOA 15-0316.09
DWG#: 14-2202
• Non-ASSA Bahama & Colonial Shutters; Supreme Impact System:
BERTHA™ Board &
Batten Shutter
FL 11967
DWG# 15-047
Aluminum Bahama
Shutter (FPC)
FL 14452-R1
DWG# 15-167
Aluminum Colonial
Shutter (FPC)
FL 14451-R1
DWG# 15-168
SHU-161
DWG# 13-052
DWG# 07-254
Supreme Hurricane
Impact System
FBC (Non-HVHZ): Meets Florida Building Code for Non-High
Velocity Hurricane Zones
FBC (HVHZ): Meets Florida Building Code for High Velocity
Hurricane Zones
TDI: Meets Texas Department of Insurance Standards
IBC: Meets International Building Code
IRC: Meets International Residential Code
Miami-Dade NOA: Meets Florida Building Code for High
Velocity Hurricane Zones (Dade County)
For specific product approvals and code standards
contact your EMS Sales Representative.
+ See www.hurricanefabric.com for more information
Copyright© 2015 Eastern Metal Supply, Inc. HV, Bertha are all
trademarks of Eastern Metal Supply, Inc. All rights reserved.
Eastern Metal Supply
FL: 800-432-2204 NC: 800-343-8154
TX: 800-996-6061 MO: 888-822-6061
www.EasternMetal.com
Hurricane 01
[email protected]
01/13/16
2016 Approved Hurricane Products
Product
Description
FBC
(Non-HVHZ)
FBC
(HVHZ)
TDI
Evaluation
IBC/IRC
Miami-Dade
Assoc. Approval
HV™ Accordion
System (Blade 1)
FL 389-R7
DWG# 15-085
FL 1850-R9
DWG# 15-080
SHU-108
DWG# 04-059
DWG# 03-035
HV™ Accordion
System
(Combo - Blade 1 & 2)
FL 389-R7
DWG# 15-084
FL 1850-R9
DWG# 15-079
HV™ Accordion
System (Blade 3)
FL 389-R7
DWG# 15-086
FL 1850-R9
DWG# 15-081
SHU-193
DWG# 10-092
DWG# 13-055
40mm BERTHA™
Roll Shutter
NON-Retention
See 40mm ER
Below
See 40mm ER
Below
SHU-107
DWG# 13-029
DWG# 02-510
60mm BERTHA™
Roll Shutter
NON-Retention
See 58mm ER
Below
See 58mm ER
Below
SHU-107
DWG# 13-029
DWG# 02-510
40mm BERTHA™
ER Roll Shutter
End Retention
FL 16903-R3
DWG# 15-090
FL 17204-R2
DWG# 15-091
SHU-217
DWG# 15-013
DWG# 15-166
58mm BERTHA™ ER
Roll Shutter - Retention
& Non Retention
FL 5790-R9
DWG#: 15-0401
FL 17424
DWG#: 15-092
BERTHA™ Colonial
Shutter (Impact)
FL 2681-R3
DWG# 15-087
Combo
FL 2681-R3
DWG# 15-083
Non Combo
DWG# 06-214
BERTHA™ Bahama
Shutter (Impact)
FL 2683-R3
DWG# 15-087
Combo
FL6566-R3
DWG# 15-083
Non Combo
DWG# 06-214
HIGH VISIBILTY (HV)
Colonial Shutter
FL 8200-R5
DWG# 15-089
SHU-146
DWG# 12-168
DWG# 07-004
HIGH VISIBILTY (HV)
Bahama Shutter
FL 8523-R4
DWG# 15-088
SHU-145
DWG#12-167
DWG# 07-005
FBC (Non-HVHZ): Meets Florida Building Code for Non-High
Velocity Hurricane Zones
FBC (HVHZ): Meets Florida Building Code for High Velocity
Hurricane Zones
TDI: Meets Texas Department of Insurance Standards
IBC: Meets International Building Code
IRC: Meets International Residential Code
Miami-Dade NOA: Meets Florida Building Code for
High Velocity Hurricane Zones (Dade County)
ASSA Products listed above require membership to the American Shutter Systems
Association unless listed otherwise. Contact the ASSA for more information.
American Shutter Systems Association
4268 Westroads Dr., West Palm Beach, FL 33407
877-999-ASSA Fax: (561) 209-8380
www.amshutter.org [email protected]
01/13/16
Hurricane 02
2” BERTHA™ ROLL FORM STORM PANEL SYSTEM
2” Coverage Chart
Before Installation
After Installation
2” Panels
Hemmed
Knurled
.050 Aluminum
NC Only
FL, NC
.050 Aluminum - 1/2 panel
N/A
FL, NC
24 Gauge Galv Steel
N/A
FL, NC
24 Gauge Galv Steel - 1/2
N/A
FL
Knurled Edge
Hemmed Edge
Any item manufactured in FL is available via shuttle to the other branches.
Any item manufactured in NC is available via shuttle to TX.
FL • NC • TX maintain inventory of 20’ panels that can be offline punched and cut to size.
2” .050 BERTHA™
Aluminum Storm Panel
Mill Finish - 1/2 panel available
Code Approved:
FBC (Non-HVHZ), TDI, IBC/IRC
2” BERTHA™ Clear Panel
1/2 panel available
2” 24-Gauge BERTHA™
Galvanized Steel Panel
1/2 panel available
Code Approved:
**All panels are
available cut-to-length
Scan QR Code
to View Hurricane
Section Online.
Code Approved:
FBC (Non-HVHZ), FBC (HVHZ),
TDI, IBC/IRC, Miami-Dade
Copyright 2007-2013 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA®,
DACROSHIELD® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a
trademark of the American Shutter Systems Association. All rights reserved.
One Panel
Half Panel
Hurricane 03
EMS FL
1-800-432-2204
(561) 588-4780 - fax
Quality Shapes In Aluminum
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
website: www.easternmetal.com
e-mail: [email protected]
version: 08/13/13
CODE APPROVED BERTHA™ HEADERS: 2” X .094
BERTHA™ H-Header
2” x .094” x 20’
40-WH-3500 White
40-MB-3500 Bronze
BERTHA™ U-Header
2” x .094” x 20’
40-WH-4500 White
40-MB-4500 Bronze
2” Build-Out BERTHA™ Header
2” x .094” x 20’
40-WH-3560 White
40-MB-3560 Bronze
2” x .094” x 20’
40-WH-3550 White
40-MB-3550 Bronze
2” x .094” x 20’
40-WH-3570 White
40-MB-3570 Bronze
NON APPROVED BERTHA™ HEADERS: 2” X .062
U-Header
2” x .062” x 20’
40-WH-450 White
40-MB-450 Bronze
H-Header
2” x .062” x 20’
40-WH-350 White
40-MB-350 Bronze
Copyright 2007-2016 Eastern Metal Supply, Inc. HVTM, BERTHA HV®,
BERTHA®, DACROSHIELD® are all trademarks of Eastern Metal Supply, Inc.
ASSA® is a trademark of the American Shutter Systems Association. All rights reserved.
Hurricane 04
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/15/16
2-1/4” BERTHA™ ROLL FORM STORM PANEL SYSTEM
**All panels are available cut-to-length
2-1/4” Panels
Hemmed
Knurled
.040 Aluminum
N/A
FL
.050 Aluminum
FL
FL
.050 Aluminum - 1/2 panel
N/A
FL
24 Gauge Galv Steel
FL
FL
24 Gauge Galv Steel - 1/2
N/A
FL
.030 Miami Dade Galv Steel
N/A
FL
2-1/4” Coverage Chart
Knurled Edge
Hemmed Edge
Any item manufactured in FL is available via Shuttle to the other branches.
2-1/4” .040 BERTHA™
2-1/4” 24-Gauge BERTHA™
Mill Finish
1/2 panel available
Code Approved:
FBC (Non-HVHZ), IBC/IRC
Code Approved:
FBC (Non-HVHZ), IBC/IRC
2-1/4” .050 BERTHA™
2-1/4 ” .030 BERTHA™
Mill Finish*/White *1/2 panel available
1/2 panel available
Code Approved:
FBC (Non-HVHZ), FBC (HVHZ),
TDI, IBC/IRC, Miami-Dade
Code Approved:
FBC (HVHZ)
2-1/4” ValueGuard Panel
2-1/4” BERTHA™ Clear
Panel
White Translucent
Code Approved:
Code Approved:
One Panel
Pre-Cut 2-1/4” Storm Panels
FL: In Stock; NC: Mfg lead time less than 1 week
.040 Aluminum
Mill Finish
80-40-33 x 33”
80-40-47 x 47”
80-40-57 x 57”
80-40-70 x 70”
80-40-88 x 88”
80-40-102 x 102”
.050 Aluminum
Mill Finish
77-52-33 x 33”
77-52-47 x 47”
77-52-57 x 57”
77-52-70 x 70”
77-52-88 x 88”
77-52-102 x 102”
Clear Panel
Polycarbonate
79-06-33 x 33”
79-06-47 x 47”
79-06-57 x 57”
79-06-70 x 70”
79-06-88 x 88”
79-06-102 x 102”
Two Panels
Copyright 2007-2013 Eastern Metal Supply, Inc.
HV™, BERTHA HV®,
BERTHA®, DACROSHIELD® are all
trademarks of Eastern Metal Supply, Inc.
ASSA® is a trademark of the American Shutter
Systems Association. All rights reserved.
One & a Half Panels
Hurricane 05
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 06/04/14
2-1/4” X .075 BERTHA™ CODE APPROVED HEADERS & STUDLESS TRACKS
BERTHA™ U-Header
2-1/4” x .075” x 19’
White
41-WH-510
41-MB-510
Bronze
BERTHA™ H-Header
2-1/4” x .075” x 19’
41-WH-500
White
Bronze
41-MB-500
Custom Lengths
White (FL)
41-WH-39 x 39”
41-WH-51 x 51”
41-WH-63 x 63”
41-WH-75 x 75”
41-WH-87 x 87”
41-WH-99 x 99”
2-1/4” x .075” x 19’
White
41-WH-520
41-MB-520
Bronze
2-1/4” x .075” x 19’
41-WH-522
White
2-1/4” x .075” x 19’
41-WH-525
White
BERTHA™ 1” Studless Track x 20’
BERTHA™ Studless Flat Track x 20’ BERTHA™ 2” Studless Track x 20’
40-63-615 (TX) M/F
40-WH-615
White
40-MB-615
Bronze
40-WH-632
BERTHA™ 3” Studless
Track x 20’
BERTHA™ Studless Angle
Track x 20’
40-WH-635
40-WH-610
White
Copyright 2007-2016 Eastern Metal Supply, Inc. HV™, BERTHA HV®,
EMS FL
1-800-432-2204
(561) 588-4780 - fax
White
40-WH-630
White
BERTHA™ Reverse “F” Track x 20’
40-WH-620
White
BERTHA™ Stucco F-Track x 20’
1/2”
MILL ORDER 52-63-5615
White
Hurricane 06
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
BERTHA™ STUDDED TRACKS
BERTHA™ Studded Angle
2 x 2 x .093 x 24’ 3”
6” on center
Standard:
Finish:
Reverse:
M/F
N/A
11-MF-500
11-WH-500
White
11-WH-500RS
11-MB-500
Bronze
11-MB-500RS
Standard
2 x 2 x .093 x 24’ 3”
12” on center
White; Standard
11-WH-39
x 39”
11-WH-51
x 51”
11-WH-63
x 63”
Standard
11-WH-75
x 75”
11-WH-87
x 87”
x 99”
11-WH-99
Reverse
2 x 2 x .093 x 24’ 3”
12” on center
Standard:
Finish:
Reverse:
N/A
M/F
SPECIAL ORDER 11-MF-510RS
11-WH-510
White
SPECIAL ORDER 11-WH-510RS
11-MB-510
Bronze
N/A
Standard
BERTHA™ Low Profile Studded Angle
1.75 x 5/8 x 24’ 3”
6” on center
11-WH-455
White
12” on center
11-WH-460
White
Reverse
BERTHA™ Standard Angle x 20’
2 x 2 x .093”
51-63-544 (TX) White
51-63-543
Bronze
52-63-013
Ivory
BERTHA™ Snap Cap x 20’ 3”
52-63-8292
Mates with Studded Plate (below)
BERTHA™ Standard Angle x 20’
2 x 2 x 1/8”
11-63-315
M/F
11-WH-376
White
11-MB-376
Bronze
11-IV-376
Ivory
11-BG-376
Beige
BERTHA™ Studded Plate x 20’ 3”
non studded
52-63-8291
52-WH-8291
6” on center
MILL ORDER 52-WH-8295 (FL)
12” on center
Mates with Snap Cap (above)
Hurricane 07
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/15/16
**CLOSE-OUT**
High-strength, nylon hybrid coated with UV-resistant resin.
BERTHA™ ASTROGUARD
MASTER ROLL
CUT-TO-LENGTH
CUT-TO-SIZE
2,825 Sq. Ft. - 9' 5" x 300' - 280 lbs
12" OD - 3" ID Cardboard Tube
(Includes 600 Clips with 4800 Screws)
(Clips Included every 6" O/C - 2 sides only)
(Clips Included every 12" O/C - 2 sides only)
41-WH-95300 White - CLOSE-OUT
9' 5" x CTL- WHT
9' 5" x CTL- WHT
CLIP (pack of 24)
Bag includes screws and clips
SPECIAL ORDER Black
CLOSE-OUT
CLIP (one each)
#8 x 1/2" SMS Pan
Head Phillips 410 SS
41-BK-CLIP
CLOSE-OUT
(Bag of 8)
Black
41-85410PH - CLOSE-OUT
BERTHA™
ASTROGUARD
STORAGE BAG
28.5” wide x 44” Long
41-AG-BAG
Maroon
CLOSE-OUT
LABEL
WHITE SAMPLE
(FBC) (250 per roll)
10" x 10" with Label & Clip
LABEL-5 - CLOSE-OUT
41-WH-AGSAMPLE
CLOSE-OUT
White
Hurricane 08
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/15/16
BERTHA™ SHADE & SHUTTER FABRIC
BERTHA™ Screen x 100’ Rolls
Black
T18KKS002
10' 6" x 100’
150 lbs.
1050 sq ft
T18KKS003
9' x 100’
125 lbs.
900 sq ft
BERTHA™ Screen Rope
8mm 3 Strand Rope
40013-700
Black x 600'
40013-600
White x 600'
BERTHA™ Screen Side
Rail x 24’
White
41-WH-700
BERTHA™ Screen 3-1/4 Side
Rail x 24’ 5”
BERTHA™ Screen 4” Reel
Tube Sleeve
BERTHA™ Screen 6” Reel
Tube Sleeve
41-63-352
41-63-353
BERTHA™ Screen
Bottom Rail x 20’
41-WH-707
White
41-IV-707
Ivory
41-MB-707
Bronze
Mill Finish x 20’
Mill Finish x 20’
41-WH-705
41-IV-705
41-MB-705
White
Ivory
Bronze
BERTHA™ Screen Rail
Cap x 24’
White
41-WH-703
Ivory
41-IV-703
41-MB-703
Bronze
BERTHA™ Screen
Bottom Rail Cap
Black
41-BK-710
2 piece
assembled
rail shown
BERTHA™ Screen
Solar Thread
White
41-WH-709
41-BK-709
Black
BERTHA™ Screen .355
Vinyl Insert
41-WH-708
White x 1000’
41-BK-708
Black x 1000’
BERTHA™ Bottom Rail
Felt
Black
41-GL-720
1” Pile x .500 Backer
Hurricane 09
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/15/16
BERTHA HV® ACCORDION SHUTTER - BLADE 3
Code Approvals: FBC (non-HVHZ), FBC (HVHZ)
BERTHA HV® CEILING HEADER #1 x 20’
#3
BERTHA HV® BLADE
41-COLOR-4000 x 14’ 6” (10 Pcs/Sub)
41-COLOR-4055 x 16’ 6” (120 Pcs/Master)
41-COLOR-4100 x 18’
41-COLOR-424
(4 Pcs.)
Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG)
Felt: 41-HV-320
Covered under US Patents #5,458,179; #6,779,582
BERTHA HV® (3) 3/8” BUILD
OUT TRACK x 20'
BERTHA HV® 1” BUILD OUT
TRACK x 20'
BERTHA HV® (3) 2” BUILD
OUT TRACK x 20'
41-COLOR-462
41-COLOR-426
41-COLOR-468
Available in White (WH), Ivory (IV),
Bronze (MB) and Beige (BG)
Felt: 41-HV-320
Felt: 41-HV-320
Felt: 41-HV-320
BERTHA HV® (3) 3/8” DIRECT MOUNT x 20’ BERTHA HV® (3) 1” DIRECT MOUNT x 20’
41-COLOR-466
41-COLOR-465
BERTHA HV® (3) 2” DIRECT MOUNT x 20’
BERTHA HV® 90/180 STARTER x 20’
41-COLOR-469
41-COLOR-415
Hurricane 10
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
website: www.EasternMetal.com
version: 08/16/16
BERTHA HV® ACCORDION SHUTTER - BLADE 3
BERTHA HV® ADJ TRACK
w/FELT x 20'
BERTHA HV® (3) SILL
ADAPTOR W/LIP x 20'
BERTHA HV® WALKOVER
TRACK x 20’
41-COLOR-423
41-COLOR-464
41-COLOR-440
(6 Pcs.)
Felt: 41-HV-320
(6 Pcs.)
Felt: 41-HV-320
Accepts Vinyl Inserts (p15)
BERTHA HV® CENTERMATE
Self Mating
#1 X 20’
BERTHA HV® FLOATING
CENTERMATE #2 X 20’
BERTHA HV® FEMALE
T LOCK x 20’
41-COLOR-421
41-COLOR-422
41-COLOR-438
(6 Pcs.)
(4 Pcs.)
(4 Pcs.)
BERTHA HV® MALE
T LOCK x 20’
BERTHA HV® HD™
BERTHA HV® HD™
CENTERMATE w/o RODS x 20’
CENTERMATE WITH RODS x 20’
41-COLOR-437
41-COLOR-439
41-COLOR-435
Available in
White (WH)
Ivory (IV)
Bronze (MB)
Beige (BG)
Available in
White (WH)
Ivory (IV)
Bronze (MB)
Beige (BG)
(4 Pcs.)
BERTHA HV® HD™
INSERT x 20’
41-COLOR-436
Available in White (WH),
Ivory (IV), Bronze (MB)
and Beige (BG)
Mates with BERTHA
HV® HD™ Centermates
Hurricane 11
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
BERTHA HV® ACCORDION SHUTTER - BLADES 1 & 2
Code Approvals: FBC (non-HVHZ), FBC (HVHZ), TDI, IBC/IRC
BERTHA HV® BLADE #2
HV® BLADE #1
BERTHA
41-COLOR-400
41-COLOR-405
41-COLOR-410
x 14’ 6” (10 Pcs/Sub)
x 16’ 6” (120 Pcs/Master)
x 18’
41-COLOR-406
41-COLOR-411
x 16’ 6” (10 Pcs/Sub)
x 18’ (120 Pcs/Master)
BERTHA HV® UNIVERSAL FLOATER
x 18’ (10 Pcs/Sub)
41-COLOR-450
TRACK FELT ROLL x 2000’ (.320/.270)
41-HV-320 Black Felt Roll
BERTHA HV® CEILING HEADER #1 x 20’
41-COLOR-424
(4 Pcs.)
BERTHA HV® 3/8” BUILD OUT
HEADER #1 x 20'
41-COLOR-425
Felt: 41-HV-320
(4 Pcs.)
Felt: 41-HV-320
HEADER #1 x 20'
HEADER #1 x 20'
41-COLOR-426
41-COLOR-433
(4 Pcs.)
Available in White (WH), Ivory (IV), Bronze (MB)
and Beige (BG)
Felt: 41-HV-320
Felt: 41-HV-320
Hurricane 12
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
BERTHA HV® HD CEILING
HEADER #2 x 20’
BERTHA HV® HD 3/8” BUILD OUT
HEADER #2 x 20'
41-COLOR-430
41-COLOR-431
(4 Pcs.)
Felt 41-HV-320
(4 Pcs.)
Felt: 41-HV-320
BERTHA HV® HD 1” BUILD OUT
HEADER #2 x 20'
BERTHA HV® SHD™ CEILING HEADER x 20'
41-COLOR-432
41-COLOR-470
(4 Pcs.)
(10 Pcs.)
Felt: 41-HV-320
Felt: 41-HV-320
BERTHA HV® 3/8” DIRECT MOUNT
STARTER x 20’
BERTHA HV® 1” DIRECT MOUNT
STARTER x 20’
41-COLOR-427
41-COLOR-428
(4 Pcs.)
(6 Pcs.)
BERTHA HV® 2” DIRECT MOUNT
STARTER x 20’
BERTHA HV® 90/180 STARTER x 20’
41-COLOR-434
41-COLOR-415
(6 Pcs.)
(14 Pcs.)
Hurricane 13
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
HVTM, BERTHA HV®, BERTHA®, DACROSHIELD® are all trademarks of Eastern Metal Supply, Inc.
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
®
BERTHA HV ADJ TRACK
w/FELT x 20'
BERTHA HV® SILL
ADAPTOR W/LIP x 20'
BERTHA HV® WALKOVER
TRACK x 20’
41-COLOR-423
90-COLOR-012
41-COLOR-440
(6 Pcs.)
(6 Pcs.)
(6 Pcs.)
Felt: 41-HV-320
Felt: 41-HV-320
Accepts Vinyl Inserts (p15)
BERTHA HV® ANODIZED
TRENCH TRACK x 20’
BERTHA HV® CORNER
41-63-437
41-COLOR-429
Silver Anodized
(6 Pcs.)
Felt: 41-HV-320
BERTHA HV® CENTERMATE #1 X 20’
BERTHA HV® FLOATING
41-COLOR-421
(6 Pcs.)
Self Mating
41-COLOR-422
(4 Pcs.)
BERTHA HV® FEMALE T
LOCK x 20’
BERTHA HV® MALE T LOCK
x 20’
41-COLOR-438
41-COLOR-437
(4 Pcs.)
(4 Pcs.)
BERTHA HV® J-CLIP
52-63-4159F
for T-Handle Lock
MF with pretreat; 4” x 2.75” x .125”
1/4” hole
100 pc/box
Hurricane 14
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
BERTHA HV® HD™ CENTERMATE
WITHOUT RODS x 20’
BERTHA HV® HD™ CENTERMATE
WITH RODS x 20’
41-COLOR-439
41-COLOR-435
and Beige (BG)
and Beige (BG)
BERTHA HV® HD™
INSERT x 20’
BERTHA HV® RAINGUARD x 17’
41-COLOR-436
and Beige (BG)
41-COLOR-460
and Beige (BG)
(10 Pcs.)
Mates with BERTHA
HV® HD™ Centermates
BERTHA HV® BUILD-OUT ANGLE x 20’
2 x 5 x .190 x 20’ With Inside Radius
11-COLOR-413
6063-T6
BERTHA HV® BUILD-OUT ANGLE x 20’
2-1/2 x 7 x .190 x 20’
With Inside Radius
11-COLOR-420
6063-T6
BERTHA HV® VINYL INSERTS
BERTHA HV® COMBO BLADE LABEL
Mates with Walkover Track 41-COLOR-440
LABEL-3
41-WH-Insert2
41-IV-Insert2
41-MB-Insert2
41-BG-Insert2
41-BK-Insert
White x 8’
Ivory x 8’
Bronze x 8’
Beige x 8’
Black x 12’
(250 per Roll)
Warning:
During periods of hurricane warnings, homeowner, tenant or others must properly close all
BERTHA HV® & HD centermates and engage
or lock all BERTHA HV® & HD locks.
Bagged Sample
41-INSERT-RING
Hurricane 15
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
BERTHA HV® ACCORDION WINDOW
HV® WINDOW HAND TOOL
HV-TOOL
HV® WINDOW PUNCH
SPECIAL ORDER
HVPUNCH
3 HOLES - HV® BLADE # 1 X 6'
Punched Window 3 Holes
41-COLOR-72P3
BERTHA HV® ACCORDION WINDOW
41-HV-WINDOW
Patent Pending
3” Diameter Viewports on Blade (3 each)
30-1/4” End of Blade to centerline of first opening
Spacing @ 5-3/4” On Center
41-COLOR-96P3
41-COLOR-96P5
HVPUNCH-1 (Pic at right:)
Top Row Components Left to Right:
Base Die, 3/4" Socket, 3/4" Metal & Teflon
Washers, 3/4" Compression Bolt
Center Row Components Left to Right:
Slug Knockout Tool, HV Hand Tool,
Bottom Row Components Left to Right:
Cutting Die w/ Thrust Bearing, 1" Hole Saw
Far right pic: HVPUNCH-1 in case
Hurricane 16
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
BERTHA HV® ACCORDION SHUTTER SAMPLES
BERTHA HV® ACCORDION KIT
BERTHA HV® CENTERMATE SAMPLE
HV-KIT
Includes Mini Sample;
Boxed 6” HV Blade 1
Components
HV-SAMPLE
17” x 30”
Top Track: 1” Build-Out Header
Bottom Track:
Walkover
SPECIAL ORDER HV-KIT3
Includes Mini Sample;
Boxed 6” HV Blade 3
Components
Centermate:
BERTHA HV® Centermate
BERTHA HV® “HEAVY DUTY”CENTERMATE SAMPLE
BERTHA HV® “T-LOCK” CENTERMATE SAMPLE
HD-SAMPLE
SPECIAL ORDER
HT-SAMPLE
17” x 30”
17” x 30”
Bottom Track:
Walkover
Bottom Track:
Walkover
Centermate:
“HD” Centermate
Centermate:
“T Lock” Centermate
BERTHA HV® ACCORDION SHUTTER RADIUS TRACK
Ideal for Large Balconies
or Bay Windows
Beige (BG) and Bronze (MB)
Available for HD™ Tracks
and SHD™ Tracks (High Rise)
Not a Stock Item
Custom Sizes & Lengths are
Also Available
Covered under US Patents
5458179 and 6779585
Hurricane 17
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
BERTHA HV® ACCORDION COMPONENTS AVAILABLE FROM
HV Bushings boxes of 100
/HVLONG1 Long White
/HVLONG2 Long Black
/HVSHORT1 Short White
/HVSHORT2 Short Black
/HVHAT1 Hat White Only
HV Wheel Carriage
/WC10
HV Push Button Lock
/LOHVBE Beige
/LOHVBZ Bronze
/LOHVIV Ivory
/LOHVWH White
HV Egress Lock
/LOHVTT/WH White
/LOHVTT/BZ Bronze
/LOHVTT/BE Beige
/LOHVTT/IV Ivory
/LOHVTT (cylinder only)
HV Saltwater Lock &
HV Thumbscrews
/HVPLATE - Stainless Steel Plate
/31C100MTPB/HV - Black Thumbscrew
/31C100MTPW/HV - White Thumbscrew
HD Lock
/LOHRHB
Hook Bolt Mortise Lock –SS
/LOBRCL
Key cylinder – Brass/SS
/LOBRTT
Thumb turn cylinder – brass/SS
HV T-Handle Lock with J-Clip
/LOWH White
/LOBZ Bronze
/LOIV Ivory
/LOBE Beige
HV Locking Pins
Please specify ¼-20 or 3/8-16
thumbscrew. Also specify Stainless
Steel or Nylon thumbscrew
HV Snap Track
/ECSC
HV Holdback Clip
/HVCLIPBZ - Black
/HVCLIPWH - White
HV 3/8 X ¾ Acetel®
Thumb Screw
/37C75MTSN White
/37C75MTSNB Black
please specify white or black
HV Accordion Screws
14D275TUW4/HV 14 x 2-3/4” Long
14D175TUW4/HV 14 x 1-3/4” Long
10N275TUW4/HV 10 x 2-3/4" Long
Hurricane 18
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/16/16
40MM BERTHA™ ER ROLL SHUTTER SYSTEM
Code Approvals: FBC Non-HVHZ, FBC HVHZ, IBC/IRC, TDI & Miami-Dade
40mm Double Wall
Slat with Screw
Boss x 22’
40-COLOR-471
Vented
40mm Single Wall
Slat with Screw
Boss x 22’
40-COLOR-470
Vented
and Beige (BG)
40-COLOR-469
NON-Vented
40-COLOR-472
NON-Vented
and Beige (BG)
40mm Small Leg Track x 22’ 6”
40-COLOR-475
Mates w/ Bertha™ ER Cover Cap
40mm Large Leg Track x 22’ 6” BERTHA™ ER Cover
Cap x 22’ 6”
40-COLOR-480
Mates w/ Bertha™ Open Track
40-COLOR-485
40mm #10 x 2 ER Screw
90003C
100/pkg
Track Felt Roll x 2000’
(.320/.270)
40mm Screw Sleeve
90002C
100/pkg
Black
40mm Hand Held Sample
40ERDW-SAMPLE
Double Wall
SPECIAL ORDER 40ERSW-SAMPLE
Single Wall
17” x 8” with Base Slat & Lock
40mm Slat Lock - LEFT
90000C
100/pkg
Black
40mm Slat Lock - RIGHT
90001C
100/pkg
Black
Additional 40mm Extrusions
& Accessories on
Next page (Hurricane 20)
Copyright 2007-2015 Eastern Metal Supply, Inc. HVTM,
BERTHA HV®, BERTHA®, DACROSHIELD®
are all trademarks of Eastern Metal Supply, Inc.
ASSA® is a trademark of the American Shutter Systems
Association. All rights reserved.
Hurricane 19
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/19/16
40MM BERTHA™ ER ROLL SHUTTER SYSTEM
Code Approvals: FBC Non-HVHZ, FBC HVHZ, IBC/IRC, TDI & Miami-Dade
40mm Base Cover x 20’
40-COLOR-105
40mm Base Slat x 20’
40-COLOR-100
40mm Base Slat Cylinder Lock
SPECIAL ORDER
2003432
Available in
White (WH),
Ivory (IV),
Bronze (MB)
and Beige (BG)
Available in
White (WH),
Ivory (IV),
Bronze (MB)
and Beige (BG)
Bottom Slat Weather Seal
41-68-101
400' Roll - 21" Reel
40mm Base Slat Locking Rod
10-63-265
3/16 x 1 x 20’
Bulb Gasket Seal Black
Mates w/ 40mm, 55mm, 58mm, 60mm Slats
Mill Finish
40mm Base Slat Lock Guide
40-BK-800
Black Plastic
Profile
Somfy myLink™
1811264
Requires RTS
Motor; Free App
Download
40mm Single Wall Sample
with Assist Spring
40ERSW-SPRING
24” x 24”
Additional 40mm Extrusions & Acc.
on Previous page (Hurricane 19)
Hurricane 20
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 09/27/16
58MM BERTHA™ END RETENTION SYSTEM (ER)
Code Approvals: FBC (non-HVHZ); Open Back Slat: FBC (non-HVHZ), TDI, IBC/IRC 58mm BERTHA™ ER SLAT
Vented x 21’
40-COLOR-810PC
Vented x 24’
40-COLOR-805PC
58mm BERTHA™ ER VIEW PORT SLAT x 24’
40-Color-805 PCVP 1 x 2 Window
CLEAR POLYCARBONATE VIEW PORT INSERT X 8’
1-7/16 x .090
40-VP-805
NON Vented x 24’
40-WH-805PCNV
White
3” BERTHA™ ER TRACK x 24’
Felt: 41-HV-320
40-COLOR-824PC
BERTHA™ ER SLAT LOCK GLIDE
40-63-799
boxed - 500 sets left and right
BERTHA™ SLAT LOCK
(Non-ER)
40-63-798
boxed - 1000 pcs
Lock Glide
Slat Lock
BERTHA™ DADE TRACK x 24’ 6”
(Non-ER)
Felt: 41-HV-160
41-COLOR-300
3” BERTHA™ HEAVY DUTY ER TRACK x 24’
Felt: 41-HV-320
MILL ORDER 40-COLOR-825PC
Available in White (WH), Ivory (IV), Bronze (MB)
BERTHA™ ER COVER CAP x 22’ 6”
Mates w/ Bertha™ Open Track
40-COLOR-485
BERTHA™ ER OPEN TRACK x 22’ 6”
Felt: 41-HV-320 Mates w/ Bertha™ Cover Cap
(Open End)
40-COLOR-800
Hurricane 21
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/16/16
58MM BERTHA™ END RETENTION SYSTEM
Code Approvals: FBC (non-HVHZ); Open Back Slat: FBC (non-HVHZ), TDI, IBC/IRC Bertha™ Painted Aluminum Square Tube
Stock Code
Size in Inches
( E x M x S color )
Approx.
Wt/Lin ft.
19-WH-225
19-WH-220
19-MB-235
19-IV-235
19-BG-235
19-BK-235
3 x .125 x 20' White
3 x .125 x 24' White
3 x .125 x 24' Bronze
3 x .125 x 24' Ivory
3 x .125 x 24' Beige
3 x .125 x 24' Black
1.726
1.726
1.726
1.726
1.726
1.726
19-COLOR-240
3 x .250 x 24’ **
3.300
19-WH-245
19-WH-400
19-MB-246
19-IV-400
19-BG-400
19-BK-400
200-WH-028
200-MB-028
4 x .125 x 20’ White
4 x .125 x 24' White
4 x .125 x 24' Bronze
4 x .125 x 24' Ivory
4 x .125 x 24' Beige
4 x .125 x 24' Black
4 x .125 x 30' White
4 x .125 x 30' Bronze
2.325
2.325
2.325
2.325
2.325
2.325
2.325
2.325
19-WH-2500
19-MB-2500
19-IV-2500
19-BG-2500
19-WH-2501
4 x .250 x 20’ White
4 x .250 x 24’ Bronze
4 x .250 x 24’ Ivory
4 x .250 x 24’ Beige
4 x .250 x 24’ 6” White
4.500
4.500
4.500
4.500
4.500
Bertha™ Painted Aluminum Rectangular Tube
Stock Code
Size in Inches
( E x M x S color)
Approx.
Wt/Lin ft.
20-COLOR-803
20-COLOR-805
4 x 6 x .125 x 24’ **
4 x 6 x .250 x 20’ **
2.925
5.700
**COLOR - Available in:
White (WH), Bronze (MB), Ivory (IV), Beige (BG)
Touch Up Spray Paint
16 ounce cans
Stock Code
Color
35-00-100
35-00-100G
35-00-105
35-00-105G
35-00-110
35-00-115 (TX)
35-00-115G
35-00-120
35-00-120G
White
White Gloss
Bronze
Bronze Gloss
Ivory Gloss
Beige
Beige Gloss
Black
Black Gloss
Hurricane 22
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER SYSTEMS - Code Approvals
40mm: FBC (non-HVHZ), FBC (HVHZ), TDI, IBC/IRC
60 MM SLAT x 22’ (non-vented)
White
40-WH-700
(10 Pcs.)
60 MM SLAT x 22’ (vented)
MILL ORDER 40-WH-705T - White
40-IV-705T
Ivory - Closeout
40-MB-705T
Broze - Closeout
40-BG-705T
Beige - Closeout
(10 Pcs.)
60mm SLAT LOCK
Black Left & Right
40-63-797
55 MM SLAT x 20’ (non-vented)
MILL ORDER 52-63-1131
MILL ORDER 40-WH-255
55mm ER SLAT LOCK
40-63-785
Top
40-63-784
Bottom
Black
40-COLOR-275T
(10 Pcs.)
BOTTOM SLAT x 22’
41-COLOR-001
(10 Pcs.)
40mm SLAT LOCK Black
40-63-796
Black Left & Right
Hurricane 23
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/13/13
40 MM TRACK x 20’
41-COLOR-002
(6 Pcs.)
55 MM TRACK x 22’6”
41-COLOR-003
(6 Pcs.)
DADE 55 MM TRACK x 24’6”
(6 Pcs.)
41-COLOR-300
Bronze (MB)
Felt: 41-HV-320
Felt: 41-HV-320
Felt: 41-HV-160
BOTTOM SLAT WEATHER SEAL
400' Roll - 21" Reel
41-68-101
FELT ROLL x 2000’ (.320/.270)
Bulb Gasket Seal Black
Mates w/ 40mm, 55mm, 58mm, 60mm Slats
FELT ROLL x 4000’ (.160/.270)
41-HV-160* Gray Felt Roll
*for the Dade 55mm Track (41-COLOR-300)
Profile
2” STORM BAR CLIP x 12’
40-63-262
Mill Finish
Hurricane 24
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
Storm Bars x 22’ 6”
(Dove Tail Tubes)
40-WH-902
White (8 Pcs.)
58 mm Octagonal Tube x 24’
40-63-250 Mill Finish
60mm Reel Tube x 17’
2.365 ID
51-63-338
Mill Finish
70mm Heavy Reel Tube x 24’ 1”
70mm HD Reel Tube x 21’ 1”
41-63-349
Wall: 0.215
94mm Reel Tube
3.701 ID
41-63-350 x 24’
41-63-11905 x 31’
52-63-7521
Wall: 0.168
100mm Reel
Tube x 20’
18-61-255 3.548 ID (3-1/2”)
SCH 40
In-Line Galvanized Steel
Reel Tube
4” (95.5MM ID)
4” O.D.; 120 Wall
41-GLV-240
x 20’
41-GLV-288
x 24’
BERTHA™ Reel Sleeve
41-63-352 Mill Finish x 20’
BERTHA™Reel Tube
Sleeve
41-63-353 Mill Finish x 20’
Hurricane 25
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
Typical Roll Shutter
Hood* Assembly
Override Motor
Standard Motor
* Various Hood sizes, styles & colors listed on Hurricane p34
Hurricane 26
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 11/05/13
ROLL SHUTTER COMPONENTS: Gears
Gear 11:1 Ratio 7MM Hex 66 lbs. max (plastic)
6A23811PF7
Gear 8:1 Ratio 7MM Hex 44 lbs. max (plastic)
6A23808PF7
Gear 11:1 Ratio 7mm Hex 66 lbs.max/ZAMAC (metal)
6A23811ZF7
Gear 8:1 Ratio 7MM Hex 44 lbs.max/ZAMAC (metal)
6A23808ZF7
1424 Simu Gear 11:1 7mm Hex/16mmm square
(Come with Bracket 2003639)
2002146
1424 Simu Gear Connector
Mates with Gears
2002392
ROLL SHUTTER COMPONENTS: Handcranks & Universals
5' Crank Handle w/Bell (NICKEL)
6A322E78215
5' Assembled Awning Handle & Hook
2001892
Hurricane 27
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER COMPONENTS: Handcranks & Universals
(continued)
90° Hex Drive Universal 2 hole (exterior mount)
includes screw for bullet ; bullet sold separately
6A323S584E7
90° Square Drive Universal 2 hole (exterior mount)
includes screw for bullet
2004121
90° Hex Drive Universal 4 hole (interior mount)
includes screw for bullet; bullet sold separately
6A323T584E7
90° Square Drive Universal 4 hole (interior mount)
includes screw for bullet; bullet sold separately
2004125
Bullet for Universal (pivot)
Universal Hex Coupler for Extension Shaft
Mates with Hex Ext. Shaft for Universals
Screw comes with Universal;
Mates with Bell for removeable crank handle
9685120
6A32341FX
Handle Lock Wall Clip (plastic)
2005402
Universal Hex Extension Shaft x 13”
Mates with Hex Coupler for Universals
9420659
Hurricane 28
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER COMPONENTS: Crank Extension
CRANK EXTENSION KIT
Includes one of each of the following:
Crank Handle Extension
1/2" Tube x 10’
SS Handle for Extension
Mates with 2004173; Needs pin 2003341
• Crank handle extension (1/2" tube) 2004173
Mates with 2004166; needs pin 2005400
• SS handle for extension (needs pin 2003341)
2004173
2004166 • Bell for extension (needs pin 2005400)
2001776 • Roll Pin for Bell 2005400 • Roll Pin for
Handle 2003341
2004166
CRANK-KIT
Bell for Extension
Needs pin 2005400; Mates with Bullet
for Crank Rod/Handle
2001776
Roll Pin for Bell
Mates with Bell and
Crank Handle Extension
2005400
Roll Pin for Handle
Mates with SS Handle 2004166
2003341
ROLL SHUTTER COMPONENTS: Assist Springs
Assist Spring 60mm 75 lb (34 KG)
Assist Spring 60mm 137 lb (62KG)
Assist Spring 70mm 66 lb (30 kg) SIMU
6C0445160G2
7014-023
6C0450140G4
2005355
2002372
All Assist Springs Utilize Plate 6A39438
Hurricane 29
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER COMPONENTS: Caps, Pivots and Adapter Rings
60mm Idle Side Adjustable Pivot (metal)
6C66643AL
70mm Idle Side Adjustable Pivot (metal)
6C66645AL
60mm Idle Side Adjustable Pivot (plastic)
6C66643
70mm Idle Side Adjustable Pivot (plastic)
6C66645
60mm Bearing End Cap (bearing not included)
2003504
70mm Bearing End Cap (bearing not included)
2003505
60mm Nylon Gear Insert
6D66603
60mm Aluminum Gear Insert (metal)
6C66603AL
70mm Aluminum Gear Insert (metal)
6C66605AL
60 mm Double Adjustable Cap
6A66743
70 mm Double Adjustable Cap
6A66745
60mm Adjustable Articulated Cap
6A66753
60mm Cap with Round Pivot (plastic)
6D66633
60mm Aluminum Cap w/Round Pivot (metal)
6D66633AL
70mm Aluminum Cap w/Round Pivot (metal)
6D66635AL
SIMU 60mm Idler cap (use plate 2003638) 60mm Octagonal Adapter Ring for Round Tube
2003592
2006280
SIMU 70mm Idler cap (use plate 2003638) 70mm Octagonal Adapter Ring for Round Tube
2003560
2003501
Hurricane 30
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER COMPONENTS: Bearings and Plates
42 mm Ball Bearing Steel Bushing
6C35802
HD Stainless Steel Bearing
41-HV-SB100 End Bearing
41-HV-SB101 Center Bearing
Bearing Plate (100mm x 100mm)
includes mounting screws
6A39431
Heavy Duty Bearing Plate
(100mm x 100mm)
7006107
Plate for Gear (100mm x 100mm)
6A39436
Universal Plate for Gear - no pin
(100mm x 100mm)
6A39441
Simu 1424 Gear Plate
(for # 2002146)
2003639
SIMU Spring Support Plate
(100mm x 100mm) w/retainer clip
2003638
Spring Support Plate
Intermediate Bracket Support
(for continuous units)
2003381
Screws for ALL Plates
(cheese head/4 per plate)
2005563
(100mm x 100mm) w/retainer screw & nut
6A39438
Hurricane 31
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER COMPONENTS: Plugs, Stops, Entry Guides, Slat Hangers, Slat Locks
10 mm - 1/2" Track Plugs
White
701277
5/8" Track Plugs
58NPWH
White (shown)
58NPIV
Ivory
58NPBG
Beige
58NPMB
Bronze
Conical Stop (screw included)
6D3332320
White (shown)
2006136
Ivory
2006320
Beige
2003493
Bronze
Entry Guide
(by the pair - for 40mm)
6D8642020
White
Entry Guide
(by the pair - for 55mm & 60mm)
2005490
White
Hood Roller 40 x 95 x 30mm
2001826
Slat Hanger
(for 40mm)
6A33713FX
Slat Hanger
(for 55mm, 58mm, 60mm)
6A33619FX
40mm Slat Lock Guide
40-63-796
60mm Slat Lock Guide
40-63-797
58mm End Retention Slat Lock Guide
40-63-799
58mm Slat Lock Guide (non retention)
40-63-798
Hurricane 32
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER COMPONENTS: End Caps
45° End Caps: SMALL LEG (sold by the pair)
Colors Available:
White: W • Bronze: MB • Ivory: IV • Beige: BG • Mill Finish/Silver (no sufffix)
5" End Cap 125 mm-powder
5.5" End Cap 137 mm-powder
6.5" End Cap 150 mm-powder
2006315COLOR
2002765COLOR
2005472COLOR
2005327COLOR
6C81518M20COLOR
6C81520M20COLOR
2006459COLOR
45° End Caps: LARGE LEG (sold by the pair)
Colors Available:
White: W • Bronze: MB • Ivory: IV • Beige: BG • Mill Finish/Silver (no sufffix)
7008-592COLOR
6C8172520COLOR
6C8173020COLOR
10" HD 250MM END CAP KIT
12" HD 300MM END CAP KIT
14” HD 360MM END CAP KIT
9018758
9018759
9018906
White
White
White
End Cap Kits Include: left & right cap, wall bracket,
safety plate, plate support and roller accessory kit
90° End Caps (sold by the pair)
SMALL LEG ONLY
Mill Finish Only
7" End Cap
8" End Cap
10" End Cap
2002721
2002731
2002741
Mill Finish
Mill Finish
Mill Finish
ROLL SHUTTER COMPONENTS: Safety Plates
SAFETY PLATES (sold by the pair)
180-45 hole 72 (7") use with 60mm
205-45 hole 72 (8") use with 60mm
205-45 hole 92 (8") use with 70mm
250-45 hole 92 (10") use with 70mm
300-45 hole 92 (12") use with 70mm
7008-549
7008-551
7008-457
7008-245
7008-247
Hurricane 33
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER COMPONENTS: Roll Shutter Hoods (Custom Sizes Available)
45° HOODS - SMALL LEG End Cap
45° HOODS – LARGE LEG End Cap
Colors Available: White: WH • Bronze: MB • Ivory: IV • Beige: BG
Product Code
120-COLOR-5FL45
120-COLOR-5FN45
120-COLOR-5B
120-COLOR-5.5FL45
120-COLOR-5.5FN45
120-COLOR-5.5B
120-COLOR-6FL45
120-COLOR-6FN45
120-COLOR-6B
120-COLOR-6.5FL45
120-COLOR-6.5FN45
120-COLOR-6.5B
120-COLOR-7FL45
120-COLOR-7FN45
120-COLOR-7B
120-COLOR-8FL45
120-COLOR-8FN45
120-COLOR-8B
Product Code
120-COLOR-8FL45LL
120-COLOR-8FN45LL
120-COLOR-8B
120-COLOR-10FL45
120-COLOR-10FN45
120-COLOR-10B
120-COLOR-12FL45
120-COLOR-12FN45
120-COLOR-12B
Description
5" HOOD
5" HOOD
5" HOOD
5.5" HOOD
5.5" HOOD
5.5" HOOD
6" HOOD
6" HOOD
6" HOOD
6.5" HOOD
6.5" HOOD
6.5" HOOD
7" HOOD
7" HOOD
7" HOOD
8" HOOD
8" HOOD
8" HOOD
Style
45° Front with Lip
45° Front (No Lip)
Back
45° Front with Lip
45° Front (No Lip)
Back
45° Front with Lip
45° Front (No Lip)
Back
45° Front with Lip
45° Front (No Lip)
Back
45° Front with Lip
45° Front (No Lip)
Back
45° Front with Lip
45° Front (No Lip)
Back
Description
8" HOOD
8" HOOD
8" HOOD
10" HOOD
10" HOOD
10" HOOD
12" HOOD
12" HOOD
12" HOOD
Style
45° Front with Lip
45° Front (No Lip)
Back
45° Front with Lip
45° Front (No Lip)
Back
45° Front with Lip
45° Front (No Lip)
Back
7” 45° HOOD WITH LIP
90° HOODS – SMALL LEG End Cap
Product Code
120-COLOR-7FLSQ9
120-COLOR-7FNSQ9
120-COLOR-7B
120-COLOR-8FLSQ
120-COLOR-8FNSQ
120-COLOR-8B
120-COLOR-10FLSQ
120-COLOR-10FNSQ
120-COLOR-10B
7” 45° HOOD WITHOUT LIP
Description
7" HOOD
7" HOOD
7" HOOD
8" HOOD
8" HOOD
8" HOOD
10" HOOD
10" HOOD
10" HOOD
Style
90° Front with Lip)
90° Front (No Lip)
Back
90° Front with Lip
90° Front (No Lip)
Back
90° Front with Lip
90° Front (No Lip)
Back
Hoods are produced
to order; generally
ready to ship in one
week or less from FL.
Hurricane 34
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
SIMU MOTOR SPECIFICATION CHART
SIMU Motor Specifications
Rated
Model
Torque
Standard Motor
520 - 2000650
20 N.m
Standard Motor
530 - 2000651
30 N.m
Standard w/Override Motor
530 - 2000774
30 N.m
Remote Motor
530 - 2005136
30 N.m
Remote w/Override Motor
530 - 2004673
30 N.m
Standard Motor
540 - 2000652
40 N.m
540 - 2000775
40 N.m
Standard Motor
550 - 2000653
50 N.m
550 - 2000776
50 N.m
Remote Motor
550 - 2005776
50 N.m
550 - 2004675
50 N.m
Standard Motor
660 - 2000985
60 N.m
660 - 2001040
60 N.m
Standard Motor
680 - 2000986
80 N.m
680 - 2001042
80 N.m
Remote Motor
680 - 2006061
80 N.m
680 - 2006057
80 N.m
Standard Motor
6100 - 2000987
100 N.m
6100 - 2001044
100 N.m
Remote Motor
6100 - 2006062
100 N.m
6100 - 2006058
100 N.m
Standard Motor
T8 - 2004248
200 N.m
T8 - 2004249
200 N.m
Output
Speed
Tube
Rated
Diameter Voltage
Rated
Power
Rated
Current
Continuos
Freq.
Run Time Degree
Turns
Lifting Capacity**
12 rpm
47mm
120V
60 Hz
130W
1.1A
5 min
IP44
28
89 lbs - 98 lbs
12 rpm
47mm
120V
60 Hz
170W
1.5A
5 min
IP44
28
134 lbs - 148 lbs
12 rpm
47mm
120V
60 Hz
170W
1.5A
5 min
IP44
28
134 lbs - 148 lbs
12 rpm
47mm
120V
60 Hz
170W
1.5A
5 min
IP44
28
134 lbs - 148 lbs
12 rpm
47mm
120V
60 Hz
170W
1.5A
5 min
IP44
28
134 lbs - 148 lbs
12 rpm
47mm
120V
60 Hz
210W
1.8A
5 min
IP44
28
179 lbs - 195 lbs
12 rpm
47mm
120V
60 Hz
210W
1.8A
5 min
IP44
28
179 lbs - 195 lbs
12 rpm
47mm
120V
60 Hz
210W
2.1A
5 min
IP44
28
224 lbs - 246 lbs
12 rpm
47mm
120V
60 Hz
210W
2.1A
5 min
IP44
28
224 lbs - 246 lbs
12 rpm
47mm
120V
60 Hz
250W
2.1A
5 min
IP44
28
224 lbs - 246 lbs
12 rpm
47mm
120V
60 Hz
250W
2.1A
5 min
IP44
28
224 lbs - 246 lbs
14 rpm
60mm
120V
60 Hz
285W
2.5A
4 min
IP44
22
185 lbs - 268 lbs
14 rpm
60mm
120V
60 Hz
285W
2.5A
5 min
IP44
28
185 lbs - 268 lbs
14 rpm
60mm
120V
60 Hz
390W
3.4A
4 min
IP44
22
246 lbs - 358 lbs
14 rpm
60mm
120V
60 Hz
390W
3.4A
5 min
IP44
28
246 lbs - 358 lbs
14 rpm
60mm
120V
60 Hz
390W
3.4A
4 min
IP44
28
246 lbs - 358 lbs
14 rpm
60mm
120V
60 Hz
390W
3.4A
5 min
IP44
28
246 lbs - 358 lbs
14 rpm
60mm
120V
60 Hz
430W
3.8A
4 min
IP44
22
308 lbs - 448 lbs
14 rpm
60mm
120V
60 Hz
430W
3.8A
5 min
IP44
28
308 lbs - 448 lbs
14 rpm
60mm
120V
60 Hz
430W
3.8A
4 min
IP44
28
308 lbs - 448 lbs
14 rpm
60mm
120V
60 Hz
430W
3.8A
5 min
IP44
28
308 lbs - 448 lbs
10 rpm
94mm
120V
60 Hz
600W
5.1A
4min
IP44
13
551 lbs
10 rpm
94mm
120V
60 Hz
600W
5.1A
4min
IP44
13
551 lbs
Protection Max Limit
Theoretical
** Lifting Capacity decreases as the height increases.
Hurricane 35
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 09/02/14
ROLL SHUTTER MOTORS by SIMU: Standard Motors - Type 5
SIMU STANDARD MOTORS (Type 5)
SIMU OVERRIDE MOTORS (Type 5)
T5 35 Nm 18 rpm 120V (535)
T5 40 Nm 12 rpm 120V (540)
T5 50 Nm 12 rpm 120V (550)
DMI5 30 Nm 12 rpm 120V (MO 530)
DMI5 35 Nm 18 rpm 120V (MO 535)
DMI5 40 Nm 12 rpm 120V (MO 540)
DMI5 50 Nm 12 rpm 120V (MO 550)
2000648 (Non Stock Item)
2000652
2000653 ref. 449SK
2000774
2000775
Crowns, Drives & Brackets
Sold Separately
Sold Separately
MOTOR ADAPTORS
MOTOR ADAPTORS
(crown & drive)
T5 60mm Octagonal Set,
Aluminum Drive Wheel
9012814
(crown & drive)
T5 Operator Bracket
T5 70mm Octagonal Set, 80mm x 80mm square
9520049
9012812
MOTOR BRACKETS
MOTOR BRACKETS
MOTOR BRACKETS
T5 Operator Bracket
T5 DMI Override
100mm x 100mm square Operator Bracket
9520187
DZ315K ref. 9706034
T6 60 Nm 14 rpm 120V (660)
T6 80 Nm 14 rpm 120V (680)
T6 100 Nm 14 rpm 120V (6100)
DMI6 60 Nm 14 rpm 120V (MO 660)
DMI6 80 Nm 14 rpm (MO 680)
DMI6 100 Nm 14 rpm 120V (MO 6100)
2000986
2001040
2001044
Sold Separately
Sold Separately
MOTOR ADAPTORS (crown & drive)
MOTOR BRACKETS
MOTOR BRACKETS
9012815
T6 Operator Bracket (100mm x 100mm sq.)
9530018
T5 DMI Override Operator Bracket
DZ315K ref. 9706034
Hurricane 36
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
T8 200 Nm 94mm diameter 10 rpm 120V
2004248
T8 200 Nm 94mm diameter 10 rpm 120V
Sold Separately
Sold Separately
MOTOR ADAPTORS
(crown & drive)
T8 94MM Round Drive
Wheel
9001297
MOTOR BRACKETS
T8 Bracket Angle
(2 piece set)
9001413
2004249
T-8 MOTOR ACC.
T-8 MOTOR ACC.
T-8 MOTOR ACC.
T8-9 Override Eye & Shaft
T8 Idler Support
2003807
94mm Idle Insert
9542008
9340020
ROLL SHUTTER MOTORS by SIMU: Toggle Switches
TOGGLE SWITCH
TOGGLE SWITCH
KEY SWITCHES
Single Pole Maintained
Single Pole Momentary
2005520
2005521
2005522
2005523
Maintain Key Switch
2001547
Momentary Key Switch
2001548
Extra Key Blanks 2005752 (Non Stock Item)
Ivory
White
Ivory
White
DESIGNER PADDLE SWITCHES
DESIGNER PADDLE SWITCHES
TEST SWITCH
Single Pole Maintained
Single Pole Momentary
2005553
2005554
2005558
2005559
Installation Test switch
2001476
Ivory
White
Ivory
White
Hurricane 37
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER MOTORS by SIMU: Remote Hz Motors - Type 5
REMOTE Hz (Type 5)
REMOTE Hz OVERRIDE MOTORS (Type 5)
T5Hz 20 Nm 12 rpm 120V (Hz 520)
T5Hz 30 Nm 12 rpm 120V (Hz 530)
T5Hz 35 Nm 18 rpm 120V (Hz 535)
T5Hz 50 Nm 12 rpm 120 V (Hz 550)
2006353 (Non Stock) DMI5Hz 30 Nm 12 rpm 120 V (MO Hz 530) 2004673*
2005136*
DMI5Hz 35 Nm 18 rpm 120 V (MO Hz 535) 2004674 (Non Stock)
2005135 (Non Stock) DMI5Hz 50 Nm 12 rpm 120 V (MO Hz 550) 2004675 ref. 446SK
2005776 ref. 445SK
* No Transmitter
* No Transmitter
Sold Separately
Sold Separately
MOTOR ADAPTORS
MOTOR ADAPTORS
(crown & drive)
9012814
(crown & drive)
T5 Operator Bracket
T5 70mm Octagonal Set, 80mm x 80mm square
9520049
9012812
MOTOR BRACKETS
MOTOR BRACKETS
MOTOR BRACKETS
T5 Operator Bracket
T5 DMI Override
100mm x 100mm square Operator Bracket
9520187
DZ315K ref. 9706034
ROLL SHUTTER MOTORS by SIMU: Remote Hz Motors - Type 6
REMOTE Hz MOTORS (Type 6)
REMOTE Hz OVERRIDE MOTORS (Type 6)
T6Hz 80 Nm 14 rpm 120V (Hz 680)
T6Hz 100 Nm 14 rpm 120V (Hz 6100)
2006061*
2006062 ref. 528SK
* No Transmitter
DMI6Hz 80 Nm 14 rpm 120V (MO Hz 680)
DMI6Hz 100 Nm 14 rpm 120V (MO Hz 6100)
2006057*
2006058 ref. 2007156
* No Transmitter
Sold Separately
Sold Separately
MOTOR ADAPTORS (crown & drive)
MOTOR BRACKETS
MOTOR BRACKETS
9012815
T6 Operator Bracket (100mm x 100mm sq.)
9530018
T5 DMI Override Operator Bracket
DZ315K ref. 9706034
Hurricane 38
36
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER MOTORS: Hz Radio Systems Accessories
Home Automation
Hz TRANSMITTER
Hz TRANSMITTER
1811403
1 Channel Handheld
2006138
White
5 Channel Handheld
2006143
White
White
Hz TRANSMITTER
Hz TRANSMITTER
Hz RADIO EXTERNAL KEYPAD
1 Channel Recessed Designer
1810603
White
1810604
Ivory
5 Channel Recessed Designer
1810813
White
1810606
Ivory
Up to 2 Hz Motors
2006029
Hz 2 CHANNEL KEYCHAIN
TRANSMITTER
2005326 ref. 2008329
ROLL SHUTTER MOTORS: Miscellaneous Electronic Components
RELAY/ISOLATION CONTROL
For 2 Switches on 1 Motor
1822135 (Non Stock)
EXTERNAL RADIO RECEIVER
For IGC; Remote for Duals & Sync Kit
1810481 (Non Stock)
To Make STND. Motor Remote
1810602
EXTERNAL SYNC. CONTROL
For Dual Motors
Standard
1822159
IGC
1822161 (Non Stock)
GROUP RELAY SWITCH
2 Motors on 1 Master Switch
2282074 (Non Stock)
3 Motors on 1 Master Switch
2282075 (Non Stock)
Hurricane 39
37
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER MOTORS: EMS Brand Standard & Override Motors
EMS Brand Motor Specification Chart
Rated
Model
Torque
Standard Motor
449K
50 N.m
423K
50 N.m
Remote Motor
445K
50 N.m
446K
50 N.m
Standard Motor
510K
100 N.m
529K
100 N.m
Remote Motor
528K
100 N.m
527K
100 N.m
580K (NOT UL LISTED) 300 N.m
Output
Speed
Tube
Rated
Diameter Voltage
Rated
Power
Rated
Current
Continuos
Freq.
Run Time Degree
Turns
Lifting Capacity**
13 rpm
45mm
120V
60Hz
235W
2.2A
4min
IP44
22
130lbs - 210 lbs
13 rpm
45mm
120V
60Hz
235W
2.2A
4min
IP44
22
130lbs - 210 lbs
13 rpm
45mm
120V
60Hz
235W
2.2A
4min
IP44
22
130lbs - 210 lbs
13 rpm
45mm
120V
60Hz
235W
2.2A
4min
IP44
22
130lbs - 210 lbs
11 rpm
59mm
120V
60Hz
340W
2.94A
4min
IP44
22
256lbs - 386lbs
11 rpm
59mm
120V
60Hz
340W
2.94A
4min
IP44
22
256lbs - 386lbs
11 rpm
59mm
120V
60Hz
340W
2.94A
4min
IP44
22
256lbs - 386lbs
11 rpm
59mm
120V
60Hz
340W
2.94A
4min
IP44
22
256lbs - 386lbs
11 rpm
92mm
120V
60Hz
881W
8.17A
4min
IP44
30
760lbs - 1015lbs
Protection Max Limit
Theoretical
** Lifting Capacity decreases as the height increases.
EMS Brand (Type 5) Standard Motor
DM45S 50NM 13RPM 120V (same as 550)
449K
EMS Brand (Type 6) Standard Motor
DM59S 100NM 11RPM 120V (same as 6100)
510K
Includes (Also Sold Separately):
60 & 70MM Crowns 60-DH01 / 70-DH154
60 & 70mm Drives 60-DL03 / 70-DL131
Bracket DZ06
Alt. Bracket
DZ04
70MM Crown
DH140
70mm Drive
DL157
Bracket
DZ193 Alt. Bracket DZ10
EMS Brand (Type 5) Override Motor
DM45S 50NM 13RPM 120V
(same as 550)
423K
60 & 70MM Crowns 60-DH01 / 70-DH154
60 & 70mm Drives 60-DL03 / 70-DL131
Bracket DZ174K
EMS Brand (Type 6) - NEW MOTOR
Override Motor
DM59M 100NM 11RPM 120V
(Same as 6100)
529K
EMS Brand (Type 9) Override Motor
DM92M 300NM 11RPM 120V
(same as T-9)
70MM Crown
DH140
70mm Drive
DL157
Bracket DZ174K
100MM Crown
DH97
100mm Drive
DL112
No Bracket - Direct Mount
580K (NOT UL LISTED)
4-6 week lead time
Hurricane 40
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
ROLL SHUTTER MOTORS: EMS Brand Remote Motors
EMS Brand (Type 5)
DM45R 50NM 13RPM 120V W/REMOTE
(same as 550)
445K
EMS Brand (Type 6)
(same as 6100)
528K
Includes (Also Sold Serarately):
60 & 70MM Crowns 60-DH01 / 70-DH154
60 & 70mm Drives 60-DL03 / 70-DL131
Bracket
DZ06
Alt. Bracket
DZ04
Single Channel Emitter
DC90
(see below)
70MM Crown
70mm Drive
Bracket
Alt. Bracket
(see below)
DH140
DL157
DZ193
DZ10
DC90
ROLL SHUTTER MOTORS: EMS Brand Remote Override Motors
EMS Brand (Type 5)
(same as 550)
446K
EMS Brand (Type 6)
(same as 6100)
527K
60 & 70MM Crowns 60-DH01 / 70-DH154
60 & 70mm Drives 60-DL03 / 70-DL131
Bracket
DZ174K
70MM Crown
70mm Drive
Bracket
(see below)
(see below)
DC90
DH140
DL157
DZ174K
DC90
ROLL SHUTTER MOTORS: EMS Brand Miscellaneous Electronics
Handheld Emitter
One Channel
DC90
(comes w/remote motors)
One Channel
Handheld Emitter
One Channel
Five Channel
DC105 Keychain Emitter
Fifteen Channel DC512 DC61
Wallmounted Emitter
One Channel
DC48
Two Channel
DC49
Twenty Channel
Wireless Receiver
DC74
(makes Std Motor a remote)
DC104
Hurricane 41
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
version: 08/18/16
HIGH VISIBILITY™ BAHAMA/COLONIAL SYSTEM
Code Approvals: FBC (non-HVHZ), TDI, IBC/IRC
Bahama/Colonial
Hollow Blade x 16’
80-MF-013
Mill Finish
uses #14 screw
HV™ Bahama/Colonial
Horizontal Frame x 20’
41-63-819
Mill Finish
Bahama Decorative
Blade x 16’
41-63-830 (Non-Impact)
Mill Finish
Colonial Decorative
Blade x 16’
41-63-835 (Non-Impact)
Mill Finish
HV™ BAHAMA
2.33 x 2.00 HV™
HORIZONTAL FRAME x 20’ Bahama/Colonial Center
Mullion x 12’
41-63-826
Mill Finish Punched
Mill Finish
41-63-818P
HV™ Colonial
Wood Hinge 2”
41-63-843
Mill Finish
Wall Mount
1 pc
HV™ Colonial
Concrete Hinge 2”
41-63-844
Mill Finish
Wall Mount
1 pc
2-1/8” Bahama/Colonial
Air Foil Blade x 16’
56-63-200
Mill Finish
uses #14 screw
2.33 x 2.00 HV™
Bahama/Colonial
SIDE FRAME x 20’ 7”
Mill Finish
41-63-823L (Punched-Left)
41-63-823R (Punched-Right)
HV™ Colonial
Flat Hinge 2”
41-63-845
Wall Mount
2.33 x 2” HV™
Bahama/Colonial Air Foil
Side Frame x 20’ 7”
SPECIAL ORDER (Mill Finish)
41-63-823RA (Punched-Right)
41-63-823LA (Punched-Left)
HV™ Colonial Storm Bar
Clip 1pc/Shutter Mount
Mill Finish
1 pc
41-63-840
41-63-840WH
41-63-840BK
41-63-840MB
Mill Finish
White
Black
Bronze
High Visibility Bahama Colonial coverage chart - Additional heights available upon request.
visible finished
blades height"
visible finished
blades height"
visible finished
blades height"
visible finished
blades height"
visible finished
blades height"
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
23-3/16
24-9/16
25-5/16
27-5/16
28-11/16
30-1/16
31-7/16
32-13/16
34-3/16
35-9/16
36-15/16
38-5/16
39-11/16
41-1/16
42-7/16
43-13/16
45-3/16
46-9/16
47-15/16
49-5/16
50-11/16
52-1/16
53-7/16
54-13/16
56-3/16
57-9/16
58-15/16
60-5/16
61-11/16
63-1/16
64-7/16
65-13/16
67-3/16
68-9/16
69-15/16
71-5/16
72-11/16
74/1/16
75-7/16
76-13/16
78-3/16
79-9/16
80-15/16
Hurricane 42
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
HIGH VISIBILITY™ BAHAMA/COLONIAL SYSTEM
HV™ Female Bahama
Hinge x 20’
41-63-836
Mill Finish
Bahama Female
Flat Hinge x 20’
6 pcs Ceiling Mount
Colonial Single Hinge x 12’ Colonial Double Hinge x 12’
Mill Finish 6 pcs
41-63-816
Wall Mount
Mates with 41-63-824N
Mill Finish 4 pcs
41-63-813
Wall Mount
Colonial Flat Hinge x 12’ HV™ Bahama Hold
Wall Mount
Down Bracket 4”
Telescoping Serrated
HV™ Bahama
Hold Down Bracket 4” Tube x 20’
Mill Finish 6 pcs
41-63-811
CONCRETE Wall Mount Storm
Bar Clips
1 pc
41-63-842
Mill Finish
41-63-842WH
White
41-63-842BK
Black
41-63-842MB
Bronze
WOOD Wall Mount Storm Bar
Clips
Set: 1 pc right & 1 pc left
41-63-841
Mill Finish
41-63-841WH
White
41-63-841BK
Black
41-63-841MB
Bronze
Mill Finish
52-63-537 .875”
26 pcs
51-63-381 1.000”
32 pcs
Colonial Flat Hinge x 12’
Shutter Mount
1 x 2 x 1/8 Storm
20-63-225
20-WH-231
20-MB-231
20-IV-231
20-BG-231
Bar x 24’
1 x 3 x 1/8 Storm
20-63-230
20-WH-230
20-IV-230
20-BG-230
Bar x 24’
Mill Finish
White
Bronze
Ivory
Beige
Mill Finish
White
Ivory
Beige
Mill Finish 6 pcs
41-63-824N
Mates with 41-63-816, 4163-813, 41-63-811, 41-63824N
1 x 3 x 1/8 x 24’ Radius Corner
Stock Also Available:
20-63-689 (NC/TX) Mill Finish
1” SLIP COLLAR WITH THUMB SCREW
HV™ Bahama Telescoping Arm Kit
Accepts 1” Serrated Tube for Telescoping Arms
7000 (FL/TX) Mill Finish x 9/16”
7000WH White x 9/16”
7000BK
Black x 9/16”
7000MB Bronze x 9/16”
MILL ORDER 52-63-2484 MF x 20’
52-00-139 (TX) Mill Finish x 9/16” (No Thumbscrew)
41014 (TX) 1/4-20 x 3/4 Thumbscrew (mates with 52-00-139)
41021 (TX) 1/4-20 x 1 Thumbscrew (mates with 52-00-139)
Kit includes Slip Collar, Camel Back, Cap
and U-Clip.
Lengths shown are maximum length
of telescoping tubes.
7002K
7002KWH
7002KBK
7002KMB
12” MF
12” White
12” Black
12” Bronze
CAMEL BACK CLIP WITH PIN
7003K (FL/TX)
7003KWH
7003KBK
7003KMB
18” MF
18” White
18” Black
18” Bronze
7001
7001WH
7001BK
7001MB
41010 (TX)
41012 (TX)
Mill Finish
White
Black
Bronze
Camel Back Clip (no pin)
Camel Back Pin
7004K (FL/TX)
7004KWH
7004KBK (FL/TX)
7004KMB
HV™ Bahama
Telescoping Arm Kit (con’t)
7017K
7017KWH
7017KBK
7017KMB
30” MF
30” White
30” Black
30” Bronze
7018K
7018KWH
7018KBK
7018KMB
36” MF
36” White
36” Black
36” Bronze
24” MF
24” White
24” Black
24” Bronze
HVTM, BERTHA HV®, BERTHA®, DACROSHIELD® are all trademarks of Eastern Metal Supply,
Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved.
Hurricane 43
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
HV™ BOARD & BATTEN COLONIAL SYSTEM
HV™ Board & Batten
Snap Channel x 12'
40-63-721
6063 T6 M/F
Snap Cap x 12'
40-63-720
6063 T6 M/F
End Cap - Flat Bar
40-63-726
3/4 x 3 x .062'
(with holes) - 6063 T52 M/F
3" Radius Tube x 24'
40-63-722
6063 T6 M/F
40-63-724
6063 T6 M/F
40-63-723
6063 T6 M/F
3” Decorative Slat x 24’
Board & Batten
8736-001 (TX) Mill Finish
4” Decorative Slat x 24’
Board & Batten
8736-002 (TX) Mill Finish
Non-Rated
Non-Rated
3.5” Tongue & Groove Slat x 24’
40-63-727
6063 T6 M/F
Non-Rated
Non-Rated
2” Concrete Hinge
41-63-847
1pc
6063 T6 M/F
2” Wood Hinge
41-63-848
1pc
6063 T6 M/F
2” Flat Hinge
41-63-846
6063 T6 M/F
Tongue & Groove End Slat x 24’
40-63-728
6063 T6 M/F
1pc
2” Bi-Fold Hinge
1pc
41-63-844
6063 T6 M/F
Board Cover Cap Architechtural Angle x 20’
11-63-220
1 x 1 x 1/16
End Cap - Architechtural
Channel x 20’
13-63-230
1-1/4 x 1-1/4 x 1/8
Hurricane 44
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
BERTHA™ IMPACT RATED EXTRUDED BAHAMA/COLONIAL SYSTEM
Code Approvals: FBC (non-HVHZ), FBC (HVHZ), IBC/IRC
Colonial/Bahama Blade x 12’6”
6 pcs
41-63-799N M/F (Non-Vented)
41-63-800N M/F (Vented)
Both mate with 41-1/2-799N
Bahama Snap Cap x 20’
Colonial/Bahama
41-63-808
Mill Finish 20 pcs
Top Half Blade x 12’6”
41-1/2-799N
Mill Finish Mates with 41-63-799N
and 41-63-800N
Colonial Frame x 20’
Mill Finish 6 pcs
41-63-802
Colonial/Bahama Frame x 20’
41-63-806
Mill Finish 8 pcs
Hinged Bahama Top Frame x 20’
41-63-807
Mill Finish 4 pcs
Female Bahama Hinge x 20’
41-63-803
Mill Finish
3.311 Female Bahama Hinge x 20’
41-63-804
Mill Finish
Kit includes Slip Collar, Camel Back, Cap
and U-Clip. Lengths shown are maximum length
of telescoping tubes.
7002K
7002KWH
7002KBK
7002KMB
7003K (FL/TX)
7003KWH
7003KBK
7003KMB
7004K (FL/TX)
7004KWH
7004KBK (FL/TX)
7004KMB
Heavy Center Mullion x 20’
41-63-810
Mill Finish 4 pcs
Standard Center Mullion x 20’
41-63-809
Mill Finish 3 pcs
HV™ Bahama
Telescoping Arm Kit
(con’t)
7017K
7017KWH
7017KBK
7017KMB
7018K
7018KWH
7018KBK
7018KMB
Hurricane 45
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
12” MF
12” White
12” Black
12” Bronze
18” MF
18” White
18” Black
18” Bronze
24” MF
24” White
24” Black
24” Bronze
30” MF
30” White
30” Black
30” Bronze
36” MF
36” White
36” Black
36” Bronze
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
BRICKHOUSE LOW PROFILE BAHAMA/COLONIAL SYSTEM
Code Approvals: TDI, IBC/IRC
1.46 x 2.25 Brickhouse
Low Profile Side Rail x 20'
Mill Finish
20-63-805L (TX) Left Side Punched
20-63-805R (TX) Right Side Punched
Left Side
Right Side
1.46 x 2.25 Brickhouse
Low Profile Center Mullion x 20’
20-63-805M (TX)
Mill Finish
Both Sides Punched
Brickhouse Low Profile
Top/Bottom Rail x 20’
41-63-839 (TX)
Mill Finish
Brickhouse Low Profile Bahama
Top Rail w/Hinge x 20’
41-63-849
Mill Finish
Brickhouse Low Profile Colonial
Flat Hinge x 12’
41-63-824 (TX)
Mill Finish
For Bi-Fold Application
Double Hinge x 12’
41-63-813
Mill Finish
Colonial Flat Hinge x 12’
41-63-824N
Shutter to House Mount
Mill Finish
Mates with 41-63-813, 41-63-824N
Brickhouse Low Profile Blade x 16’
80-MF-013
Mill Finish
Brickhouse Low Profile 4” New
Orleans Style Center Mullion x 21’
Storm Bar x 24’
1 x 2 x 1/8 Rect Bar x 24’
For Non-Impact Decorative Applications Only 20-63-225
Mill Finish
20-WH-231
20-MB-231
20-IV-231
20-BG-231
White
Bronze
Ivory
Beige
HV™ Colonial Storm Bar Clip
1pc/Shutter Mount
41-63-840
41-63-840WH
41-63-840BK
41-63-840MB
Mill Finish
White
Black
Bronze
Hurricane 46
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
BRICKHOUSE LOW PROFILE BAHAMA/COLONIAL SYSTEM
Code Approvals: TDI, IBC/IRC
Colonial Schematic
FEATURES & BENEFITS:
• Colonial application tested to ASTM E 330, E 1886 &
E 1996 Protocols and passed the Large Missile
Impact Test as well as +/- 60 psf for both the Design
and Static Load Testing.
(Bahama not shown)
TOP/BOTTOM RAIL
• Colonial application meets or exceeds standards for
IBC/IRC (engineered drawings available).
LEFT SIDE
RAIL
• Colonial application meets or exceeds standards for
(punched)
TDI (engineered drawings available).
RIGHT
SIDE RAIL
(punched)
• Offers the appearance of a more decorative,
thin-lined traditional shutter.
• Increase LEED Rating of your “Green” Project
• Cost effective for commercial applications
• New pre-fabbed side rails & mullions eliminate need
to mechanically fasten the blades, resulting in labor
reduction of over 50% compared to traditional
Colonial shutter assemblies
BLADES
• Easy & Fast mechanical frame fastening assembly
resulting in a functional product
• Provided in mill finish to allow the fabricator the
flexibility to match colors to the building design after
assembly
• Upscale look providing a durable product for years
to come with little maintenance
TOP/BOTTOM
RAIL
Brickhouse Low Profile Bahama Colonial coverage chart - Additional heights available upon request.
visible finished
blades height"
visible finished
blades height"
visible finished
blades height"
visible finished
blades height"
visible finished
blades height"
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
21
23
24
26
28
29
31
33
35
36
38
1/2
3/16
7/8
9/16
1/4
15/16
5/8
3/8
1/16
3/4
7/16
40
41
43
45
46
48
50
51
53
55
57
1/8
13/16
1/2
3/16
7/8
9/16
1/4
15/16
5/8
5/16
58
60
62
63
65
67
68
70
72
73
75
11/16
3/8
1/8
13/16
1/2
3/16
7/8
9/16
1/4
15/16
5/8
77
79
80
82
84
85
87
89
90
92
94
5/16
11/16
3/8
1/16
3/4
7/16
1/8
13/16
9/16
1/4
95 15/16
97 5/8
99 19/64
100
102 11/16
104 3/8
106 1/16
107 3/4
109 7/16
Hurricane 47
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 09/19/14
HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL SYSTEMS*
*Currently available for decorative applications; Future code testing pending
HV Low Profile Bahama Schematic (Exterior View)
41-63-831
41-63-831
41-63-803
41-63-837N
41-63-832L125
or
41-63-832R125
41-63-832L125
or
41-63-832R125
41-63-838P125
or
41-63-838P200
41-63-831
or
41-63-862
41-63-831
41-63-831
or
41-63-862
41-63-831
41-63-831
Note: For applications requiring
code rated hurricane protection refer to
EMS High Visibility Bahama/Colonial product.
HV Low Profile Colonial Schematics (Exterior Views)
Decorative Engineering available upon request.
All rivets & screws are commercially available.
HV Low Profile Z-Blade System Schematic
41-63-803
41-63-831
41-63-861L
or
41-63-861R
41-63-861L
or
41-63-861R
41-63-837N
41-63-861L
or
41-63-861R
41-63-861L
or
41-63-861R
41-63-860
41-63-860
41-63-838PZ
41-63-860
41-63-860
41-63-831
41-63-831
Decorative Colonial Application (Exterior View)
Decorative Bahama Application (Exterior View)
Hurricane 48
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 05/16/14
2” LOW PROFILE DECORATIVE BAHAMA/COLONIAL SYSTEM*
2” Bahama/Colonial Hollow
Blade x 16’
Uses #14 screw
80-MF-013
Mill Finish
2” Bahama Decorative
Blade x 16’ (Non-Impact)
41-63-830
Mill Finish
2” Colonial Decorative
Blade x 16’ (Non-Impact)
41-63-835
Mill Finish
Low Profile Side Frame x 20’ 3”
Mill Finish
UNPUNCHED
41-63-832
41-63-832L200
PUNCHED Left*
41-63-832R200
PUNCHED Right*
*Punched
for 2”
Blades
Low Profile Horizontal
Low Profile Bahama Vertical
Center Mullion x 20’ 3” Mill Finish Frame x 21’
Mill Finish
41-63-838
UNPUNCHED 41-63-831
41-63-838P200
PUNCHED*
Low Profile Colonial Horizontal
Rail x 16’ 2” x 20’
41-63-862
Mill Finish
Horizontal Rail for Colonials
Can be used as
Bottom Frame &
Center Mullion;
Colonial Top Frame
*Punched
for 2”
Blades
LOW PROFILE MALE BAHAMA
FRAME HINGE
BAHAMA FEMALE HINGE x 20’
41-63-803
Mill Finish 6 pcs
41-63-837N x 20’
Mill Finish
1” BUILD-OUT BAHAMA
FEMALE HINGE x 20’
41-63-804 Mill Finish 6 pcs
2” Low Profile Bahama Colonial coverage chart
Additional heights available upon request. Blades continue inside top & bottom channel.
Alternate New Orleans Style
4” Bottom Rail x 21’
Colonial Applications
41-63-863
Mill Finish
BAHAMA FEMALE FLAT
HINGE x 20’
41-63-805
Mill Finish 6 pcs
For Hinges & Components
see Hurricane p55
visible total
finished
blades blades height"
visible total
finished
visible total
finished
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
48
49
50
51
52
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
12
13-13/16
15-5/8
17-7/16
19-1/4
21-1/16
22-7/8
24-11/16
26-1/2
28-1/4
30-1/16
31-7/8
33-11/16
35-1/2
37-5/16
39-1/18
40-15/16
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
42-3/4
44-9/16
46-3/8
48-3/16
5051-13/16
53-5/8
55-7/16
57-4/16
59-1/16
60-7/8
62-11/16
64-1/2
66-5/16
68-1/8
69-15/16
71-3/4
40
41
42
43
44
45
46
47
48
50
51
52
53
54
73-1/2
75-5/16
77-1/8
78-15/16
80-3/4
82-9/16
84-3/8
86-3/16
8891-5/8
93-7/16
95-1/4
97-1/16
98-7/8
Hurricane 49
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
1-1/4” HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL SYSTEM*
1-1/4” HV LOW PROFILE BLADE x 12’
41-63-834
Mill Finish
HV LOW PROFILE BAHAMA VERTICAL
CENTER MULLION x 20’ 3” Mill Finish
UNPUNCHED
41-63-838
PUNCHED*
41-63-838P125
HV LOW PROFILE SIDE
FRAME x 20’ 3” Mill Finish
UNPUNCHED
41-63-832
41-63-832L125
PUNCHED Left*
41-63-832R125
PUNCHED Right*
*Punched
for 1-1/4”
Blades
*Punched
for 1-1/4”
Blades
HV LOW PROFILE COLONIAL
HORIZONTAL RAIL x 16’ 2”
HV LOW PROFILE
HORIZONTAL FRAME X 21’
41-63-862
Mill Finish
Can be used as
Bottom Frame &
Center Mullion;
Colonial Top Frame
BAHAMA FEMALE HINGE x 20’
ALTERNATE NEW
ORLEANS STYLE
4” BOTTOM
RAIL x 21’
Colonial
Applications
41-63-863
Mill Finish
1” BUILD-OUT BAHAMA
HV LOW PROFILE MALE
BAHAMA HINGE
41-63-837N x 20’
Mill Finish
BAHAMA FEMALE FLAT
HINGE x 20’
1-1/4” Low Profile Bahama Colonial coverage chart
visible
blades
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
total
finished
blades height"
22
20-5/8
23
21-1/2
24
22-3/8
25
23-1/4
26
24-1/8
27
25-1/16
28
25-15/16
29
26-13/16
30
27-11/16
31
28-9/16
32
29-7/16
33
30-5/16
34
31-3/16
35
32-1/16
36
33
37
33-7/8
38
34-3/4
39
35-5/8
visible
blades
36
37
38
39
40
41
42
43
44
45
46
48
49
50
51
52
53
54
total
finished
blades height"
40
36-1/2
41
37-3/8
42
38-1/4
43
39-1/8
44
40
45
40-15/16
46
41-13/16
47
42-11/16
48
43-9/16
49
44-7/16
50
45-5/16
52
47-1/16
53
47-15/16
54
48-7/8
55
49-3/4
56
50-5/8
57
51-1/2
58
52-3/8
visible
blades
55
56
57
58
59
60
61
62
63
see Hurricane p55
total
finished
blades height"
59
53-1/4
60
54-1/8
61
55
62
55-7/8
63
56-13/16
64
57-11/16
65
58-9/16
66
59-7/16
67
60-5/16
Hurricane 50
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL Z-BLADE SYSTEM*
HV LOW PROFILE Z-BLADE x 12’ 2”
for Z-Blade System
HV LOW PROFILE VERTICAL FRAME
WITH SNAP x 16’ 2”
Mill Finish
41-63-860 Mates with 41-63-861R/L
for Z-Blade System
HV LOW PROFILE Z - SNAP PLATE x 16’ 2”
Mill Finish
41-63-861R
41-63-861L
Mates with 41-63-860
PUNCHED* Right
PUNCHED* Left
*Punched to
accept Z-Blade
HV LOW PROFILE BAHAMA VERTICAL CENTER MULLION x 20’ 3”
Mill Finish
41-63-838
41-63-838PZ
UNPUNCHED
PUNCHED*
*Punched to
accept Z-Blade
HV LOW PROFILE MALE
BAHAMA HINGE x 20’
HV LOW PROFILE
HORIZONTAL FRAME X 21’
41-63-862
Mill Finish
Can be used as
Bottom Frame &
Center Mullion;
Colonial Top Frame
BAHAMA FEMALE HINGE x 20’ 1” BUILD-OUT BAHAMA
41-63-803
Mill Finish 6 pcs
41-63-837N
Mill Finish
total
blades
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
finished
height"
27-7/16
29-1/2
31-9/16
33-11/16
35-3/4
37-3/16
39-15/16
42
44-1/16
46-3/16
48-1/4
50-5/16
52-7/16
54-1/2
56-9/16
58-11/16
60-3/4
62-3/16
64-15/16
visible
blades
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
48
49
total
blades
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
50
51
finished
height"
67
69-1/16
71-1/8
73-1/4
75-5/16
77-3/8
79-1/2
81-9/16
83-5/8
85-3/4
87-13/16
89-7/8
92
94-5/8
96-1/8
98-1/4
100-5/16
104-1/2
106-5/8
BAHAMA FEMALE FLAT
HINGE x 20’
see Hurricane p55
Low Profile Bahama Colonial Z-BLADE coverage chart
visible
blades
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
ALTERNATE NEW
ORLEANS STYLE
4” BOTTOM
RAIL x 21’
Colonial
Applications
41-63-863
Mill Finish
visible
blades
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
total
blades
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
finished
height"
108-5/8
110-3/4
112-7/8
114-7/8
117
119-1/8
121-1/8
123-1/4
125-3/8
127-3/8
129-1/2
131-5/8
133-5/8
135-3/4
137-3/4
139-7/8
142
144
Hurricane 51
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL WELDED SYSTEM*
2” Bahama/Colonial Hollow Blade x 16’
Uses #14 screw
Mill Finish
80-MF-013
Self Mating Colonial Inside
Frame x 20’ 3”
2” Bahama Decorative Blade x 16’
Non-Impact
Mill Finish
41-63-830
Center Mullion x 12’
Welded System
41-63-888
UNPUNCHED
41-63-888P
PUNCHED
Welded System
UNPUNCHED
41-63-880
41-63-880R PUNCHED Right
PUNCHED Left
41-63-880L
1.25 HV Low Profile Blade x 12’
*Special Mill Order Frame Required - Call your
Sales Representative for Coverage Chart
Side & Bottom Frame x 20’
Welded System
41-63-883
UNPUNCHED
41-63-883R PUNCHED Right
PUNCHED Left
41-63-883L
41-63-862
Mill Finish
Can also be used as a top frame in
Colonial applications
Bahama Top Frame with
Hinge x 20’
Welded System
41-63-885
BAHAMA FEMALE HINGE x 20’ 1” BUILD-OUT BAHAMA
WELDED Low Profile Bahama Colonial coverage chart
visible total
blades blades
11
12
13
14
15
16
17
18
19
20
finished
height"
24-7/16
26-1/4
28-1/16
29-7/8
31-11/16
33-1/2
35-5/16
37-1/8
38-15/16
40-3/4
visible total
blades blades
21
22
23
24
25
26
27
28
29
30
finished
height"
42-9/16
44-3/8
46-3/16
48
49-13/16
51-5/8
53-7/16
55-1/4
57-1/16
58-7/8
BAHAMA FEMALE FLAT
HINGE x 20’
see Hurricane p55
visible total
blades blades
31
32
33
34
35
36
37
38
39
40
finished
height"
60-11/16
62-1/2
64-5/16
66-1/8
67-15/16
69-3/4
71-9/16
73-3/8
75-3/16
77
Hurricane 52
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 09/12/16
2” 3-WAVE BLADE DECORATIVE COLONIAL SYSTEM*
2” 3-Wave Blade x 12’
41-63-700
Self Mating
Mill Finish 6063-T6
Side Rail with Lip x 20’
41-63-701
Mill Finish 6063-T6
Accepts 3-Wave Blade
Center Mullion x 12’
41-63-702
Mill Finish
Accepts 3-Wave Blade
Top & Bottom Rail x 21’
41-63-831
Mill Finish 6063-T6
Fixed Colonial Mounting Bracket
1.5 x 1.5 x .062 Angle (Pre-Drilled 3/16” Holes)
7053
x 10”
7055
x 14”
Radius Cover Cap x 20’
1-¼” x 1-¼” x 1/8” Channel
13-63-230
3 Wave Blade Samples
12-3/8”
2 Blades
Interlocked
Together
Coverage Chart
Additional heights available upon request.
Blades continue inside top & bottom channel.
visible
blades
1
2
3
4
5
6
7
8
9
10
finished
height"
6-11/16
12-9/16
18-7/16
24-5/16
30-3/16
36-1/16
41-15/16
47-13/16
53-11/16
59-9/16
visible
blades
11
12
13
14
15
16
17
18
19
20
finished
height"
65-7/16
41-5/16
77-3/16
83-1/16
88-15/16
94-13/16
100-11/16
106-9/16
112-7/16
118-5/16
WB-SAMPLE
12” x 24”
Powder Coated
WBA-SAMPLE
12” x 24” Arched
Powder Coated
Hurricane 53
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
NON-IMPACT BAHAMA/COLONIAL SYSTEM
For Hinges & Components see Hurricane p55 (next page)
BAHAMA/COLONIAL SOLID BLADE x 20’
52-63-4696
M/F
20 pcs
White 24 pcs
52-63-3060
Mates with Punched Frame and Cap
BAHAMA/COLONIAL HOLLOW BLADE x 16’
80-MF-011
M/F
(#8 screw)
White (#8 screw)
80-WH-011
Mates with Punched Frame and Cap
NON
NON
ASSA
ASSA
PRODUCT
PRODUCT
MALE BAHAMA FRAME (with Hinge) x 20’
52-63-8535
M/F
BAHAMA/COLONIAL FRAME x 20’
52-63-4694
M/F
8 pcs
80-WH-012
White 6 pcs
NON
ASSA
PRODUCT
NON
ASSA
2” X .093” ARCHITECTURAL
BAHAMA/COLONIAL CENTER
ANGLE x 24’ 3” (Corner Key)
MULLION x 20’ (Punched*)
52-63-5805A
52-63-4695P
M/F
6 pcs
M/F
52-63-4695
M/F (Unpunched) 6 pcs
PRODUCT
BAHAMA/COLONIAL FRAME CAP x 20’
(Punched & Unpunched)
punched* (left) 20 pcs (mates with Frame)
52-63-4698L
M/F
punched* (right) 20 pcs (mates with Mullion & Frame)
52-63-4698R
M/F
unpunched 16 pcs (mates with Frame)
52-63-4698
M/F
NON
ASSA
PRODUCT
NON
ASSA
PRODUCT
For Storm Protection Shutter
to be backed with .050 sheet
NON
Punched Punched
Left
Right
ASSA
PRODUCT
RATED NON-IMPACT DECORATIVE SHADE AWNING
For Hinges & Components see Hurricane p55 (next page)
H-Mullion x 26’ 9”
52-63-1706 6063-T6 Mill Finish
Horizontal Tube x 26’ 9”
52-63-058 6063-T6 Mill Finish
Shutter Jamb x 26’ 9”
52-63-059 6063-T6 Mill Finish
Louver Blade x 12’ 2”
52-63-060 6063-T6 Mill Finish
* Blade slides into punched .050 sheet
and inserts into Shutter Jamb slot.
Hurricane 54
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
BAHAMA/COLONIAL HINGES & COMPONENTS
Used in a variety of Bahama/Colonial Systems
Bahama Female
Hinge x 20’
41-63-803
Mill Finish
6 pcs
1” Build-Out Bahama
Female Hinge x 20’
41-63-804
Mill Finish
6 pcs
Bahama Female
Flat Hinge x 20’
41-63-805
Mill Finish
6 pcs
Bahama Male Hinge x 20’
41-63-814
Mill Finish
16 pcs
Colonial Single HInge x 12’
Colonial Double HInge x 12’
Colonial Flat HInge x 12’
Mill Finish 6 pcs
41-63-816
Wall Mount
Mill Finish 4 pcs
41-63-813
Wall Mount
41-63-811
Wall Mount
Mill Finish 6 pcs; Mates with 41-63-824N
Colonial Flat HInge x 12’
41-63-824N
Shutter Mount
Mill Finish 6 pcs; Mates with 41-63-816, 41-63813, 41-63-811, 41-63-824N
1” SLIP COLLAR WITH THUMB SCREW
Kit includes Slip Collar, Camel Back,
Cap and U-Clip. Lengths shown are
maximum length of telescoping tubes.
Kit includes Slip Collar,
Camel Back, Cap and U-Clip.
Lengths shown are maximum
length of telescoping tubes.
Accepts 1” Serrated Tube for Telescoping Arms
7000 (FL/TX)
Mill Finish x 9/16”
7000WH
White x 9/16”
7000BK
Black x 9/16”
7000MB
Bronze x 9/16”
MILL ORDER
52-63-2484 MF x 20’
52-00-139 (TX)
Mill Finish x 9/16” (No Thumbscrew)
41014 (TX) 1/4-20 x 3/4 Thumbscrew (mates with 52-00-139)
41021 (TX) 1/4-20 x 1 Thumbscrew (mates with 52-00-139)
7002K
7002KWH
7002KBK
7002KMB
7003K (FL/TX)
7003KWH
7003KBK
7003KMB
7004K (FL/TX)
7004KWH
7004KBK (FL/TX)
7004KMB
12” MF
12” White
12” Black
12” Bronze
18” MF
18” White
18” Black
18” Bronze
24” MF
24” White
24” Black
24” Bronze
Telescoping Serrated
Tube x 20’ Mill Finish
52-63-537 .875”
26 pcs
51-63-381 1.000” 32 pcs
30” MF
30” White
30” Black
30” Bronze
36” MF
36” White
36” Black
36” Bronze
7017K
7017KWH
7017KBK
7017KMB
7018K
7018KWH
7018KBK
7018KMB
Corner Key/Tie Down
Mill Finish Angle
2 x 2 x 1/8 x 20’
11-63-315
2 x 2 x 3/16 x 20’
11-63-320
CAMEL BACK CLIP WITH PIN
7001
7001WH
7001BK
7001MB
41010 (TX)
41012 (TX)
Fixed Low Pro Colonial
Mounting Bracket
1.5 x 1.5 x .062 Angle
Pre-Drilled 3/16” Holes
7058
x 4"
7053
x 10"
7055
x 14"
Mill Finish
White
Black
Bronze
Camel Back Clip (no pin)
Camel Back Pin
Low Pro Hold Back Clip
Sold in Pairs (box of 100)
LP-HOLDBACK
HV™ BERTHA HV®, BERTHA® are all trademarks of
Eastern Metal Supply, Inc. ASSA® is a trademark of the
American Shutter Systems Association. All rights reserved.
Hurricane 55
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16
SUPREME HURRICANE IMPACT SYSTEM
Supreme Hurricane Impact
System Installation Schematics
Transom x 21’
41-WH-850 White
41-MB-850 Bronze
Backing
Plate
Main Frame x 21’
41-WH-852 White
41-MB-852 Bronze
Main Frame
Mechanical Hold
Screw Cover
Screw Cover
Mechanical Hold
Split Mullion x 21’
41-WH-854 White
41-MB-854 Bronze
Transom
Mechanical Hold
Screw Cover
Screw Cover x 21’
41-WH-856 White
41-MB-856 Bronze
Screw Cover
Mechanical Hold
Main Frame
Backing Plate
Mechanical Hold x 21’
Main Frame
Backing
Plate
Backing Plate x 12’
1/4” x 3-1/2” Flat Bar
Split Mullion
Screw Cover
Screw
Cover
Mechanical
Holds
Split Mullion
Screw Cover
Mechanical
Hold
Hurricane 56
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
EMS MO
1-800-996-6061
1-888-822-6061
(281) 656-2297 - fax (314) 344-3349 - fax
version: 08/18/16

Complete Hurricane Section

Transcription

Similar documents

Pacific Cargo Control, Inc.

Complete Marine Products Section