AN001: Fitting the E6 Earset Microphone

AN001: Fitting the E6 Earset Microphone

COUNTRYMAN ASSOCIATES INC
AN001: Fitting the E6 Earset Microphone
1. Tighten the ear loop.
2. Slide your fingers to curve
the boom.
4. Put the loop over the ear with the base behind the earlobe.
The boom can touch the cheek.
3. Spring the connector away
from the boom.
5. Put the mic near the
corner of the mouth.
Countryman Associates, Inc. 195 Constitution Drive, Menlo Park, CA 94025 Phone: (800) 669-1422 or (650) 364-9988 Fax: (650) 364-2794 Email: [email protected] Web: www.countryman.com