docJohn Guest Speedfit
download 
Report Transcription
John Guest Speedfit
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories 522 Pneumatic Fittings Technical Information 523 Pneumatic Fittings - Metric 524 Pneumatic Fittings - Imperial 529 - 531 LLDPE Tube 531 Pneumatic Miniature Fittings 532 Banjo Flow Controls 532 Plumbing & Heating Fittings 533 - 534 Valves 535 Flexi Hose & Barrier Pipe 536 517 COMPRESSED AIR TECHNICAL INFORMATION EASY TO USE PUSH-FIT SYSTEM FOR COMPRESSED AIR The John Guest range of push-in fittings and pipe provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, compared with other installation methods, time savings of at least 50% are easily achievable. No need to prepare threaded pipe or solvent, all the connections can be made with a simple push-in action. The system is then immediately ready for use. Complex systems can be assembled much more rapidly than with traditional methods and because fittings are easy to disconnect, systems can be altered or extended with much reduced production down time. The fittings are produced in either a tough engineering plastic material or in brass in sizes 12mm to 28mm. They are intended for use with John Guest nylon pipe but can also be used with copper or aluminium pipe. Speedfit FOOD QUALITY All fittings in the John Guest Section with this symbol are produced in Food and Drug Administration (FDA) approved materials and are therefore recommended for food quality applications. THE PUSH-FIT SOLUTION FOR PLUMBING & HEATING SYSTEMS ARE ALSO AVAILABLE Speedfit Speedfit FEATURES / BENEFITS • Installation time reduced by at least 50% • Lightweight, easy to handle • Safe, secure, leakproof • Easy to alter or extend a system • No corrosion, reduced maintenance TUBE TYPES John Guest fittings are suitable for use with a wide range of plastic and soft metal tubing including UPVC, ABS, Polyethylene, Nylon, Mild steel and Copper to the tolerances set out below. Soft plastic tube, such as nylon, is to have a minimum wall thickness of 1.5 mm. The tube is also to have good quality surface and be damage free. 518 R WORKING PRESSURE Temperature 12mm - 28mm OD Working temperature MATERIALS Bodies O-Rings Collets TUBE TOLERANCES Size Tolerance R +23°C +70°C 10 bar 7 bar -20°C to +70°C for use with air Acetal copolymer Nitrile rubber Acetal copolymer with stainless steel teeth 12mm - 28mm OD +0.05 mm to -0.10 mm COMPRESSED AIR FITTINGS THE WATER TRAP TEE The Water Trap Tee solves the on-going problem of moisture in a Ring Main System and provides the easy alternative to the need to install “Swan Necks”. The ingenious inside arrangement of the fitting allows air to flow, with minimum head loss, from the main to take-off point without allowing water to follow. The moisture is retained in the line to be drawn off at some suitable location. STRAIGHT CONNECTOR MALE BSPP WITH O RING THREAD SEAL Part Number JGPM011213E JGPM011214E JGPM011513E JGPM011514E JGPM011516E * JGPM011814E JGPM012216E JGPM012818E 2110 TUBE OD 12 mm 12 mm 15 mm 15 mm 15 mm 18 mm 22 mm 28 mm THREAD 3/8” BSPP 1/2” BSPP 3/8” BSPP 1/2” BSPP 3/4” BSPP 1/2” BSPP 3/4” BSPP 1” BSPP Price £2.40 £2.64 £2.96 £3.12 £0.00 £3.31 £3.49 £5.59 WATER TRAP TEE 2110 Part Number JGPMTT22E TUBE OD 22 mm Price £9.51 STEM ADAPTOR MALE BSPP WITH O RING THREAD SEAL Part Number JGPM051213E JGPM051214E JGPM051513E JGPM051514E JGPM051814E JGPM052214E JGPM052216E 2110 TUBE OD 12 mm 12 mm 15 mm 15 mm 18 mm 22 mm 22 mm THREAD 3/8” BSPP 1/2” BSPP 3/8” BSPP 1/2” BSPP 1/2” BSPP 1/2” BSPP 3/4” BSPP Converts Push Fit end to male thread * No thread seal REDUCER STRAIGHT CONNECTOR 2110 2110 Part Number JGPM0412E JGPM0415E JGPM0418E JGPM0422E JGPM0428E Price £1.08 £1.33 £1.38 £1.77 £1.95 £2.14 £2.53 TUBE OD 12 mm 15 mm 18 mm 22 mm 28 mm Price £2.07 £2.36 £2.94 £3.53 £7.28 TUBE OD 12 mm 15 mm 18 mm 22 mm 28 mm Price £2.72 £3.24 £4.02 £4.84 £8.76 Part Number JGPM061510E JGPM061512E JGPM061815E JGPM062215E JGPM062218E JGPM062815E JGPM062822E STEM OD 15 mm 15 mm 18 mm 22 mm 22 mm 28 mm 28 mm TUBE OD 10 mm 12 mm 15 mm 15 mm 18 mm 15 mm 22 mm Price £2.89 £2.97 £3.53 £3.53 £3.53 £5.54 £6.67 EQUAL ELBOW 2110 Part Number JGPM0312E JGPM0315E JGPM0318E JGPM0322E JGPM0328E EQUAL TEE 2110 Part Number JGPM0212E JGPM0215E JGPM0218E JGPM0222E JGPM0228E TUBE OD 12 mm 15 mm 18 mm 22 mm 28 mm Price £2.88 £3.41 £4.25 £5.12 £11.16 STEM ELBOW 2110 Part Number JGPM221212E JGPM221515E JGPM221818E JGPM222222E STEM OD 12 mm 15 mm 18 mm 22 mm TUBE OD 12 mm 15 mm 18 mm 22 mm Price £2.75 £3.24 £4.02 £4.84 REDUCING TEE 2110 Part Number JGPM3018AE JGPM3022AE TUBE OD ENDS TUBE OD BRANCH 18 mm 15 mm 22 mm 15 mm Price £5.50 £5.50 U-BEND END STOP 2110 2110 Part Number JGPM4612E JGPM4615E JGPM4622E TUBE OD 12 mm 15 mm 22 mm Price £2.10 £2.31 £2.77 Part Number JGPMUB15E TUBE OD 15 mm Price £4.02 519 COMPRESSED AIR FITTINGS PORTING BLOCK ALUMINIUM WALL BOX 2110 Part Number JG-L-WSK CONNECTIONS 5 x 1/2” Price £13.84 2110 Part Number JGWALLBOX4 JGWALLBOX5 SIZE 1/2” 3/4” Price £28.22 £28.22 BRASS COMPRESSED AIR FITTINGS THE WATER TRAP TEE CONVERTOR The Water Trap Tee Convertor is a simple and convenient way of converting a standard 28 mm Tee, Part No. JGPMTT22E page 519, to a Water Trap Tee. When fitted, it will stop condensed water within the Air Ring Main System from entering the vertical take off spurs. It is important that the Ring Main has been installed with the correct fall and water drain points are regularly vented. WATER TRAP TEE CONVERTOR BRASS WINGBACK ELBOW FEMALE BSP 2110 2110 Part Number JGPM15WB JGPM22WB TUBE OD 15 mm 22 mm THREAD 1/2” BSP 3/4” BSP Price £15.78 £18.52 Part Number JGWTC28 TUBE OD 28 mm Price £7.65 BRASS STRAIGHT ADAPTOR MALE BSPT MALE BRASS STEM ADAPTOR MALE BSPT / BSP 2110 2110 Part Number JGMM051504N JGMM052206N JGMM052818N TUBE OD 15 mm 22 mm 28 mm THREAD 1/2” BSPT 3/4” BSPT 1” BSP Price £6.75 £10.37 £18.37 Part Number JGMM011504N JGMM012206N JGMM012808N TUBE OD 15 mm 22 mm 28 mm THREAD 1/2” BSPT 3/4” BSPT 1” BSPT Price £6.78 £11.03 £21.56 THREAD 3/4” NPT 1” NPT 1” NPT Price £13.10 £14.02 £15.72 Converts Push Fit end to male thread MALE BRASS STEM ADAPTOR MALE NPT FEMALE BRASS STEM ADAPTOR FEMALE BSP 2110 2110 Part Number JGMM501514N JGMM502216N TUBE OD 15 mm 22 mm THREAD 1/2” BSP 3/4” BSP Converts Push Fit end to male thread Price £6.75 £11.67 Part Number JGMM052226N JGMM052228N JGMM052828N TUBE OD 22 mm 22 mm 28 mm Converts Push Fit end to male thread 520 COMPRESSED AIR PIPE AND ACCESSORIES JOHN GUEST BLUE RIGID NYLON PIPE 2120 Part Number JGPARM1209 JGPARM1512 JGPARM1814 JGPARM2218 JGPARM2823 TUBE OD 12 mm 15 mm 18 mm 22 mm 28 mm TUBE ID 9 mm 12 mm 14 mm 18 mm 23 mm LENGTH 3 mtrs 3 mtrs 3 mtrs 3 mtrs 3 mtrs Price £7.35 £9.28 £15.07 £19.13 £29.95 JOHN GUEST POWDER COATED ALUMINIUM PIPE ALUMINIUM PIPE CUTTER 2120 2110 Part Number JGALCUTR15 JGALCUTR18 JGALCUTR22 JGALCUTR28 TUBE OD 15 mm 18 mm 22 mm 28 mm Price £45.95 £50.88 £50.88 £68.14 Part Number JGAL-RM1513 JGAL-RM1816 JGAL-RM2220 JGAL-RM2826 TUBE OD 15 mm 18 mm 22 mm 28 mm TUBE ID 13 mm 16 mm 20 mm 26 mm LENGTH 3 mtrs 3 mtrs 3 mtrs 3 mtrs Price £20.11 £26.67 £30.40 £48.42 PIPE CUTTER HEAVY DUTY TUBE CUTTER LIGHT DUTY 2110 2110 Part Number JGTSNIP JGBLADENIP DESCRIPTION TUBE CUTTER BLADE Price £5.91 £2.64 Part Number JGHDC JGBLADE-HDC DESCRIPTION PIPE CUTTER BLADE Price £57.90 £21.70 For up to and including 28mm pipe For up to and including 12mm pipe DEBURRING TOOL PIPE CUTTER MEDIUM DUTY 2110 Part Number JGDEBURR DESCRIPTION DEBURRING TOOL Price £213.39 2110 Part Number JGJGTS DESCRIPTION DISPOSABLE PIPE CUTTER Price £27.97 For up to and including 22mm pipe 521 ACCESSORIES COLLET COVERS METRIC COLLET COVERS IMPERIAL 2110 Part Number JGPM1904E JGPM1905E JGPM1906E JGPM1908E JGPM1910E JGPM1912E JGPM1915E JGPM1918E JGPM1922E TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 15 mm 18 mm 22 mm COLOUR BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK Price £0.12 £0.13 £0.18 £0.20 £0.21 £0.22 £0.30 £0.32 £0.38 PLUG 2110 Part Number JGPM1904S JGPI1906S JGPI1908S JGPI1908G JGPI1908R JGPI1908Y JGPM1908S JGPI1912S JGPI1912B JGPI1912G JGPI1912R JGPI1912Y JGPI1916S TUBE OD 5/32” 3/16” 1/4” 1/4” 1/4” 1/4” 5/16” 3/8” 3/8” 3/8” 3/8” 3/8” 1/2” COLOUR GREY GREY GREY GREEN RED YELLOW GREY GREY BLUE GREEN RED YELLOW GREY FLOW BEND CLIP 2110 Part Number JGPM0812R JGPM0815E JGPM0818E JGPM0822E JGPM0828E Price £0.12 £0.13 £0.14 £0.14 £0.14 £0.14 £0.20 £0.20 £0.20 £0.20 £0.20 £0.20 £0.21 TUBE OD 12 mm 15 mm 18 mm 22 mm 28 mm COLOUR RED BLACK BLACK BLACK BLACK Price £0.91 £1.04 £1.17 £1.25 £1.63 2110 Part Number JGPM2608S JGPM2610S TUBE OD 8 mm / 5/16” 10 mm / 3/8” Price £0.76 £0.88 TUBE OD 15 mm 22 mm 28 mm Price £0.36 £0.56 £0.83 SIZE 3/16” to 1/2” Price £6.82 RELEASE AID PIPE CLIP 2110 2110 Part Number JGPM15TPC JGPM18TPC JGPM22TPC JGPM28TPC JGPMPCS TUBE OD 15 mm 18 mm 22 mm 28 mm PIPE CLIP SPACERS Price £0.25 £0.27 £0.27 £0.36 £0.18 LOCKING CLIP Part Number JG15RA JG22RA JG28RA COLLET LOCKING TOOL 2110 Part Number JGPIC1808R JGPIC1812R JGPMC1815R 522 TUBE OD 1/4” 3/8” 15 mm Price £0.18 £0.20 £0.18 2110 Part Number JGICLT/2 PNEUMATIC FITTINGS TECHNICAL INFORMATION DESCRIPTION Super Speedfit push-in fittings have been specially designed for miniature pneumatic applications. They provide a fast and secure way of connecting tubes and offer considerable advantages over conventional fittings. Complex tubing systems can be assembled more rapidly than with traditional methods and because Super Speedfit fittings are easy to disconnect, fault finding and maintenance become much easier operations. FEATURES / BENEFITS FOOD QUALITY • • • • • • • • • All fittings in the John Guest Section with this symbol are produced in Food and Drug Administration (FDA) approved materials and are therefore recommended for food quality applications. Specially designed for pneumatics Suitable for plastic and soft metal tubes Grips before it seals Quick disconnection and reusable No tools needed Quality Manufacturer - ISO 9001 listed since 1989 Superior flow characteristics Collet cover prevents accidental disconnection and allows colour coding Fittings with prefix JGPM or JGPI are produced exclusively in Food and Drug Administration approved materials and are therefore recommended for food quality applications. METRIC SIZED PNEUMATIC FITTINGS - SUPER THREAD Selected metric size items have SuperThread, a unique thread seal developed by John Guest to enable male adaptors to be used with a variety of female thread forms. The special Polyurethane seal feature means no sealant need be applied to make an airtight joint. There is no danger of tape entering the system. Fittings with SuperThread also have countersunk throughbores to provide superior flow characteristics. WORKING PRESSURE Temperature 4mm - 8mm & 5/32” - 5/16” 10mm - 22mm & 3/8” - 1/2” MATERIALS Bodies O-Rings Collets -20°C 16 bar 10 bar +23°C 16 bar 10 bar +70°C 10 bar 7 bar Acetal copolymer Nitrile rubber Acetal copolymer with stainless steel teeth The design allows for a smaller compact body and reduced hexagon size. TUBE TOLERANCES Size Tolerance 4mm - 5mm +0.05 mm to -0.07 mm 6mm - 12mm +0.05 mm to -0.10 mm 5/32” - 3/16” +0.001” to -0.003” Speedfit 1/4” - 1/2” +0.001” to -0.004” R THE PUSH-FIT SOLUTION FOR PLUMBING & HEATING SYSTEMS ARE ALSO AVAILABLE Speedfit Speedfit R 523 PNEUMATIC FITTINGS - METRIC STRAIGHT ADAPTOR with integral seal MALE SUPER THREAD STRAIGHT ADAPTOR MALE BSPP 2110 Part Number JGRM010411 JGRM010412 JGRM010511 JGRM010512 JGRM010611 JGRM010612 JGRM010811 JGRM010812 JGRM010813 JGRM011012 JGRM011013 JGRM011014 JGRM011213 JGRM011214 TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” 1/4” 1/8” 1/4” 1/8” 1/4” 1/8” 1/4” 3/8” 1/4” 3/8” 1/2” 3/8” 1/2” Price £1.54 £1.98 £1.77 £2.24 £1.86 £1.86 £1.98 £1.98 £2.83 £3.30 £3.76 £4.72 £4.72 £4.98 Thread can be used with BSP, BSPT, NPT, PF and PT STRAIGHT ADAPTOR MALE BSPP 2110 Part Number JGMM010411 JGMM010611 JGMM010612 JGMM010812 TUBE OD 4 mm 6 mm 6 mm 8 mm THREAD 1/8” BSPP 1/8” BSPP 1/4” BSPP 1/4” BSPP Price £1.77 £2.14 £2.14 £2.20 THREAD M5 M5 M5 Price £1.67 £1.74 £1.88 THREAD 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 1/2” BSPT 3/8” BSPT 1/2” BSPT Price £0.76 £1.05 £0.81 £1.05 £0.94 £1.05 £1.04 £1.05 £1.36 £1.65 £1.80 £2.31 £2.27 £2.50 STRAIGHT ADAPTOR MALE METRIC THREAD 2110 Part Number JGRM0104M5 JGRM0105M5 JGRM0106M5 TUBE OD 4 mm 5 mm 6 mm STRAIGHT ADAPTOR MALE BSPT 2110 Part Number JGPM010411E JGPM010412E JGPM010511E JGPM010512E JGPM010611E JGPM010612E JGPM010811E JGPM010812E JGPM010813E JGPM011012E JGPM011013E JGPM011014E JGPM011213E JGPM011214E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 3/8” BSPP 1/4” BSPP 3/8” BSPP 1/2” BSPP 3/8” BSPP 1/2” BSPP Price £0.93 £1.10 £0.99 £1.11 £0.99 £1.10 £1.05 £1.10 £1.43 £1.76 £1.90 £2.43 £2.40 £2.64 EQUAL STRAIGHT CONNECTOR 2110 Part Number JGPM010401E JGPM010402E JGPM010501E JGPM010502E JGPM010601E JGPM010602E JGPM010801E JGPM010802E JGPM010803E JGPM011002E JGPM011003E JGPM011004E JGPM011203E JGPM011204E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm EQUAL STRAIGHT CONNECTOR 2110 Part Number JGPM0404E JGPM0405E JGPM0406E JGPM0408E JGPM0410E JGPM0412E TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £1.16 £1.17 £1.23 £1.36 £1.77 £2.07 EQUAL ELBOW 2110 Part Number JGRM0404E JGRM0405E JGRM0406E JGRM0408E JGRM0410E JGRM0412E TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £1.35 £1.38 £1.43 £1.61 £2.06 £2.41 TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £1.53 £1.56 £1.64 £1.90 £2.63 £3.14 EQUAL ELBOW 2110 Part Number JGPM0304E JGPM0305E JGPM0306E JGPM0308E JGPM0310E JGPM0312E 524 TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £1.27 £1.28 £1.39 £1.61 £2.30 £2.72 2110 Part Number JGRM0304E JGRM0305E JGRM0306E JGRM0308E JGRM0310E JGRM0312E PNEUMATIC FITTINGS - METRIC SWIVEL ELBOW c/w INTEGRAL SEAL MALE SUPERTHREAD SWIVEL ELBOW MALE BSPP 2110 Part Number JGRM090411 JGRM090412 JGRM090611 JGRM090612 JGRM090811 JGRM090812 JGRM091012 JGRM091013 JGRM091213 JGRM091214 TUBE OD 4 mm 4 mm 6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” 1/4” 1/8” 1/4” 1/8” 1/4” 1/4” 3/8” 3/8” 1/2” Price £2.32 £2.68 £2.68 £2.92 £2.92 £2.93 £4.60 £5.38 £6.13 £7.56 Thread can be used with BSP, BSPT, NPT, PF and PT 2110 Part Number JGMM090411 JGMM090611 JGMM090612 JGMM090812 TUBE OD 4 mm 6 mm 6 mm 8 mm THREAD 1/8” BSPP 1/8” BSPP 1/4” BSPP 1/4” BSPP Price £2.54 £2.93 £3.22 £3.30 THREAD M5 M5 Price £3.22 £3.59 SWIVEL ELBOW MALE METRIC THREAD 2110 Part Number JGRM0904M5 JGRM0906M5 SWIVEL ELBOW MALE BSPP TUBE OD 4 mm 6 mm SWIVEL ELBOW MALE BSPT 2110 Part Number JGPM090411E JGPM090412E JGPM090511E JGPM090512E JGPM090611E JGPM090612E JGPM090811E JGPM090812E JGPM090813E JGPM091012E JGPM091013E JGPM091014E JGPM091213E JGPM091214E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 3/8” BSPP 1/4” BSPP 3/8” BSPP 1/2” BSPP 3/8” BSPP 1/2” BSPP Price £2.60 £2.99 £2.61 £2.64 £2.61 £2.77 £3.12 £3.12 £3.58 £4.25 £4.58 £5.27 £5.31 £5.90 EQUAL TEE 2110 Part Number JGPM090401E JGPM090402E JGPM090501E JGPM090502E JGPM090601E JGPM090602E JGPM090801E JGPM090802E JGPM090803E JGPM091002E JGPM091003E JGPM091004E JGPM091203E JGPM091204E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 1/2” BSPT 3/8” BSPT 1/2” BSPT EQUAL TEE 2110 Part Number JGPM0204E JGPM0205E JGPM0206E JGPM0208E JGPM0210E JGPM0212E Price £2.53 £2.57 £2.57 £2.60 £2.57 £2.72 £2.98 £3.06 £3.45 £4.09 £4.45 £5.14 £5.18 £5.76 TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £1.72 £1.80 £1.86 £2.02 £2.42 £2.88 2110 Part Number JGRM0204E JGRM0205E JGRM0206E JGRM0208E JGRM0210E JGRM0212E TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £2.01 £2.12 £2.18 £2.41 £2.78 £3.31 525 PNEUMATIC FITTINGS - METRIC SWIVEL TEE CENTRE LEG MALE BSPP SWIVEL TEE CENTRE LEG MALE BSPT 2110 Part Number JGPM100411E JGPM100412E JGPM100511E JGPM100512E JGPM100611E JGPM100612E JGPM100811E JGPM100812E JGPM100813E JGPM101012E JGPM101013E JGPM101014E JGPM101213E JGPM101214E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 3/8” BSPP 1/4” BSPP 3/8” BSPP 1/2” BSPP 3/8” BSPP 1/2” BSPP Price £3.19 £3.71 £3.75 £3.84 £3.23 £3.36 £3.63 £3.67 £4.25 £4.51 £5.59 £5.63 £5.78 £6.36 SWIVEL RUN TEE MALE BSPP 2110 Part Number JGPM100401E JGPM100402E JGPM100501E JGPM100502E JGPM100601E JGPM100602E JGPM100801E JGPM100802E JGPM100803E JGPM101002E JGPM101003E JGPM101004E JGPM101203E JGPM101204E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 1/2” BSPT 3/8” BSPT 1/2” BSPT Price £3.07 £3.19 £3.24 £3.28 £3.71 £3.28 £3.54 £3.63 £4.11 £4.45 £4.72 £5.40 £6.43 £6.23 TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 1/2” BSPT 3/8” BSPT 1/2” BSPT Price £3.07 £3.19 £3.24 £3.28 £3.71 £3.75 £4.05 £4.16 £4.11 £4.45 £5.40 £5.40 £5.63 £6.23 SWIVEL RUN TEE MALE BSPT 2110 Part Number JGPM110411E JGPM110412E JGPM110511E JGPM110512E JGPM110611E JGPM110612E JGPM110811E JGPM110812E JGPM110813E JGPM111012E JGPM111013E JGPM111014E JGPM111213E JGPM111214E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 1/8” BSPP 1/4” BSPP 3/8” BSPP 1/4” BSPP 3/8” BSPP 1/2” BSPP 3/8” BSPP 1/2” BSPP Price £3.66 £3.24 £3.28 £3.37 £3.23 £3.36 £3.63 £3.67 £4.25 £5.17 £4.89 £5.63 £5.78 £6.36 STEM ADAPTOR MALE SUPERTHREAD 2110 Part Number JGRM050612 JGRM050812 TUBE OD 6 mm 8 mm THREAD 1/4” 1/4” Thread can be used with BSP, BSPT, NPT, PF and PT 526 Price £2.02 £2.02 2110 Part Number JGPM110401E JGPM110402E JGPM110501E JGPM110502E JGPM110601E JGPM110602E JGPM110801E JGPM110802E JGPM110803E JGPM111002E JGPM111003E JGPM111004E JGPM111203E JGPM111204E ble aila v a on re is atu dance uest r e t Li r gui hn G fo ng Jo and alli s, tube tact t s in ting con fit Please tor for u . pipe distrib ails. t r e u d e yo mor PNEUMATIC FITTINGS - METRIC STEM ADAPTOR MALE BSP STEM ADAPTOR MALE BSPT 2110 Part Number JGPM050411E JGPM050412E JGPM050511E JGPM050512E JGPM050611E JGPM050612E JGPM050811E JGPM050812E JGPM050813E JGPM051012E JGPM051013E JGPM051014E JGPM051213E * JGPM051214E * TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSP 1/4” BSP 1/8” BSP 1/4” BSP 1/8” BSP 1/4” BSP 1/8” BSP 1/4” BSP 3/8” BSP 1/4” BSP 3/8” BSP 1/2” BSP 3/8” BSP 1/2” BSP Price £0.53 £0.57 £0.53 £0.57 £0.45 £0.51 £0.46 £0.51 £0.88 £0.60 £0.81 £1.33 £1.08 £1.33 * With O-ring Thread Seal BULKHEAD CONNECTOR 2110 Part Number JGPM050401E JGPM050402E JGPM050501E JGPM050502E JGPM050601E JGPM050602E JGPM050801E JGPM050802E JGPM050803E JGPM051002E JGPM051003E JGPM051004E JGPM051203E JGPM051204E TUBE OD 4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm THREAD 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 1/2” BSPT 3/8” BSPT 1/2” BSPT BULKHEAD CONNECTOR 2110 Part Number JGPM1204E JGPM1205E JGPM1206E JGPM1208E JGPM1210E JGPM1212E TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £1.95 £2.29 £2.31 £2.39 £3.66 £4.22 2110 Part Number JGRM1206 JGRM1208 TUBE OD 6 mm 8 mm Price £5.07 £5.20 FEMALE ADAPTOR - FLAT END FEMALE BSPP BRASS BULKHEAD ADAPTOR 2110 2110 Part Number JGRM070612 JGRM070812 TUBE OD 6 mm 8 mm Price £4.47 £4.57 REDUCING STRAIGHT CONNECTOR Part Number JGPM450411E JGPM450611E JGPM450612E JGPM450812E JGPM4508F4S JGPM4508C5S JGPM451015E TUBE OD 4 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm THREAD 1/8” BSPP 1/8” BSPP 1/4” BSPP 1/4” BSPP 7/16 x 20 UNF 1/2 - 16 UNS 5/8” BSPP TUBE OD 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm Price £1.17 £1.53 £1.53 £1.53 £1.78 £2.55 £3.59 REDUCER 2110 Part Number JGPM200604E JGPM200804E JGPM200806E JGPM201004E JGPM201006E JGPM201008E JGPM201208E JGPM201210E Price £0.45 £0.46 £0.45 £0.46 £0.45 £0.46 £0.45 £0.46 £0.72 £0.55 £0.72 £1.17 £0.82 £1.17 TUBE OD 4 mm 4 mm 6 mm 4 mm 6 mm 8 mm 8 mm 10 mm Price £1.38 £1.38 £1.43 £1.72 £1.70 £1.54 £2.07 £2.42 2110 Part Number JGPM060504E JGPM060604E JGPM060605E JGPM060804E JGPM060805E JGPM060806E JGPM061006E JGPM061008E JGPM061208E JGPM061210E TUBE OD 5 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 12 mm 12 mm TUBE OD 4 mm 4 mm 5 mm 4 mm 5 mm 6 mm 6 mm 8 mm 8 mm 10 mm Price £0.81 £0.83 £0.86 £1.01 £1.01 £1.04 £1.08 £1.25 £1.38 £2.39 527 PNEUMATIC FITTINGS - METRIC SINGLE BANJO BODY MALE BSP REDUCING ELBOW 2110 Part Number JGPM210604E JGPM210804E JGPM210806E JGPM211004E JGPM211006E JGPM211008E JGPM211208E JGPM211210E TUBE OD 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm TUBE OD 4 mm 4 mm 6 mm 4 mm 6 mm 8 mm 8 mm 10 mm Price £1.75 £1.75 £1.80 £2.42 £2.42 £2.42 £2.40 £2.50 2110 Part Number JGRM150411E JGRM150511E JGRM150611E JGRM150812E JGRM151013E JGRM151214E TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm THREAD 1/8” BSP 1/8” BSP 1/8” BSP 1/4” BSP 3/8” BSP 1/2” BSP Price £1.43 £1.48 £2.23 £2.33 £2.44 £3.60 To be used with Banjo Stem STEM ELBOW ENLARGER 2110 2110 Part Number JGPM130405E TUBE OD 5 mm TUBE OD 4 mm Price £1.45 Part Number JGPM220404E JGPM220505E JGPM220606E JGPM220808E JGPM221010E JGPM221212E TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm STEM OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £1.27 £1.33 £1.33 £1.61 £2.31 £2.75 TWO-WAY DIVIDER 2110 Part Number JGRM2306E JGRM2308E JGRM2312E TUBE OD 6 mm 8 mm 12 mm Price £2.36 £2.36 £4.19 STEM ADAPTOR TUBE TO HOSE TWO-WAY DIVIDER COMPACT FITTING 2110 Part Number JGPM2304E JGPM2308E JGPM2310E TUBE OD 4 mm 8 mm 10 mm Price £1.88 £2.20 £2.66 TUBE OD 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm Price £0.31 £0.32 £0.35 £0.40 £0.74 £0.91 2110 Part Number JGPM250604E JGPM250806E JGPM251008E STEM OD 6 mm 8 mm 10 mm HOSE ID 4 mm 6 mm 8 mm Price £1.16 £1.21 £1.26 SINGLE BANJO STEM MALE BSPP 2110 Part Number JGRM1611 JGRM1612 JGRM1613 JGRM1614 STEM THREAD 1/8” BSPP 1/4” BSPP 3/8” BSPP 1/2” BSPP Price £4.29 £5.67 £8.59 £14.20 OFFSET CONNECTOR 2110 Part Number JGNC657 528 TUBE OD 12 mm TUBE OD 8 mm Price £3.46 PLUG 2110 Part Number JGPM0804R JGPM0805R JGPM0806R JGPM0808R JGPM0810R JGPM0812R DOUBLE BANJO STEM MALE BSP 2110 Part Number JGRM1711 JGRM1712 JGRM1713 JGRM1714 STEM THREAD 1/8” BSP 1/4” BSP 3/8” BSP 1/2” BSP Price £5.67 £8.59 £14.20 £17.07 PNEUMATIC FITTINGS - IMPERIAL STRAIGHT ADAPTOR MALE BSPT STRAIGHT ADAPTOR MALE NPTF 2110 Part Number JGPM010401S JGPM010402S JGPI010601S JGPI010602S JGPI010801S JGPI010802S JGPM010801S JGPM010802S JGPM010803S JGPI011202S JGPI011203S JGPI011603S JGPI011604S TUBE OD 5/32” 5/32” 3/16” 3/16” 1/4” 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 1/2” 1/2” THREAD 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 3/8” BSPT 1/2” BSPT Price £0.76 £0.81 £0.81 £1.00 £0.90 £1.00 £1.01 £1.05 £1.34 £1.63 £1.73 £2.29 £2.53 STRAIGHT ADAPTOR MALE BSPP 2110 Part Number JGPM010421S JGPM010422S JGPI010621S JGPI010821S JGPI010822S JGPI010823S JGPM010821S JGPM010822S JGPM010823S JGPI011221S JGPI011222S JGPI011223S JGPI011224S JGPI011623S JGPI011624S JGPI012026S TUBE OD 5/32” 5/32” 3/16” 1/4” 1/4” 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 5/8” THREAD 1/8” NPTF 1/4” NPTF 1/8” NPTF 1/8” NPTF 1/4” NPTF 3/8” NPTF 1/8” NPTF 1/4” NPTF 3/8” NPTF 1/8” NPTF 1/4” NPTF 3/8” NPTF 1/2” NPTF 3/8” NPTF 1/2” NPTF 3/4” NPTF Price £0.76 £0.81 £0.81 £0.90 £1.00 £0.95 £1.01 £1.05 £1.34 £1.59 £1.63 £1.73 £2.29 £2.29 £2.53 £2.89 TUBE OD 3/16” 5/32’ 3/16” 1/4” 3/16” 1/4” 5/16” 5/16” 3/8” Price £1.38 £1.39 £1.42 £1.43 £1.70 £1.73 £1.53 £1.99 £2.16 REDUCING STRAIGHT ADAPTOR 2110 Part Number JGPI010812S JGPI011212S TUBE OD 1/4” 3/8” THREAD 1/4” BSPP 1/4” BSPP Price £1.67 £1.82 For use with sport face ports EQUAL STRAIGHT ADAPTOR 2110 Part Number JGPI200806S JGPM200804S JGPI201006S JGPI201008S JGPI201206S JGPI201208S JGPI201210S JGPI201610S JGPI201612S TUBE OD 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 1/2” 1/2” 2110 Part Number JGPM0404S JGPI0406S JGPI0408S JGPM0408S JGPI0412S JGPI0416S TUBE OD 5/32” 3/16” 1/4” 5/16” 3/8” 1/2” Price £1.09 £1.12 £1.28 £1.34 £1.74 £2.12 TUBE OD 5/32” 3/16” 1/4” 5/16” 3/8” 1/2” Price £1.76 £1.78 £1.98 £2.04 £2.41 £2.89 REDUCING TEE 2110 Part Number JGPI301208S JGPI301612S TUBE OD ENDS TUBE OD BRANCH 3/8” 1/4” 1/2” 3/8” Price £2.64 £3.21 EQUAL TEE 2110 Part Number JGPM0204S JGPI0206S JGPI0208S JGPM0208S JGPI0212S JGPI0216S 529 PNEUMATIC FITTINGS - IMPERIAL EQUAL ELBOW STEM ELBOW 2110 Part Number JGPM0304S JGPI0306S JGPI0308S JGPM0308S JGPI0312S JGPI0316S TUBE OD 5/32” 3/16” 1/4” 5/16” 3/8” 1/2” Price £1.29 £1.33 £1.52 £1.57 £2.26 £2.72 SWIVEL ELBOW MALE BSPT 2110 Part Number JGPM220404S JGPI220606S JGPI220808S JGPM220808S JGPI221212S JGPI221616S TUBE OD 5/32” 3/16” 1/4” 5/16” 3/8” 1/2” Price £1.33 £1.34 £1.35 £1.67 £2.47 £2.64 SWIVEL ELBOW MALE NPTF 2110 Part Number JGPI090601S JGPI090801S JGPI090802S JGPM090801S JGPM090802S JGPM090803S JGPI091202S JGPI091203S JGPI091603S JGPI091604S TUBE OD 3/16” 1/4” 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 1/2” 1/2” THREAD 1/8” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 3/8” BSPT 1/2” BSPT Price £3.19 £3.58 £3.67 £3.77 £3.79 £3.92 £4.76 £5.14 £5.84 £5.88 STEM ADAPTOR MALE BSPT 2110 Part Number JGPI090621S JGPI090821S JGPI090822S JGPM090821S JGPM090822S JGPM090823S JGPI091222S JGPI091223S JGPI091623S JGPI091624S TUBE OD 3/16” 1/4” 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 1/2” 1/2” THREAD 1/8” NPTF 1/8” NPTF 1/4” NPTF 1/8” NPTF 1/4” NPTF 3/8” NPTF 1/4” NPTF 3/8” NPTF 3/8” NPTF 1/2” NPTF Price £3.19 £3.58 £3.67 £4.29 £3.79 £4.46 £4.76 £5.14 £5.84 £5.88 THREAD 1/2” BSP 5/8”BSP 3/8” BSP 1/2” BSP 5/8” BSP 3/8” BSP 5/8” BSP Price £2.89 £3.10 £2.77 £3.05 £3.29 £2.95 £3.55 FEMALE ADAPTOR - FLAT END FEMALE BSP 2110 Part Number JGPI050601S JGPI050801S JGPI050802S JGPM050801S JGPM050802S JGPM050803S JGPI051202S JGPI051203S JGPI051603S JGPI051604S TUBE OD 3/16” 1/4” 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 1/2” 1/2” THREAD 1/8” BSPT 1/8” BSPT 1/4” BSPT 1/8” BSPT 1/4” BSPT 3/8” BSPT 1/4” BSPT 3/8” BSPT 3/8” BSPT 1/2” BSPT Price £0.78 £0.88 £0.91 £0.92 £0.94 £1.01 £0.95 £1.20 £1.22 £1.24 2110 Part Number JGPI451014F JGPI451015F JGPI451213S JGPI451214F JGPI451215F JGPI451613S JGPI451615F TUBE OD 5/16” 5/16” 3/8” 3/8” 3/8” 1/2” 1/2” BULKHEAD CONNECTOR PLUG 2110 2110 Part Number JGPM0804S JGPI0806S JGPI0808S JGPM0808S JGPI0812S JGPI0816S 530 STEM OD 5/32” 3/16” 1/4” 5/16” 3/8” 1/2” Price £0.32 £0.34 £0.34 £0.40 £0.59 £0.90 Part Number JGPM1204S JGPI1206S JGPI1208S JGPM1208S JGPI1212S JGPI1216S TUBE OD 5/32” 3/16” 1/4” 5/16” 3/8” 1/2” Price £1.95 £2.29 £2.37 £3.46 £3.53 £5.01 PNEUMATIC FITTINGS - IMPERIAL STEM ADAPTOR TUBE TO HOSE 2110 Part Number JGPI250806S JGPI250808S JGPI250810S JGPI251006S JGPI251008S JGPM250808S JGPI251012S JGPI251208S JGPI251210S JGPI251212S JGPI251216S JGPI251612S JGPI251616S STEM OD 1/4” 1/4” 1/4” 5/16” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” HOSE ID 3/16” 1/4” 5/16” 3/16” 1/4” 5/16” 3/8” 1/4” 5/16” 3/8” 1/2” 3/8” 1/2” Price £0.70 £0.74 £0.72 £0.76 £0.83 £0.90 £1.22 £1.24 £1.17 £1.25 £1.34 £1.46 £1.63 ELBOW TUBE TO HOSE 2110 Part Number JGPI290808S JGPI290810S JGPI291008S JGPM290808S JGPI291208S JGPI291210S STEM OD 1/4” 1/4” 5/16” 5/16” 3/8” 3/8” HOSE ID 1/4” 5/16” 1/4” 5/16” 1/4” 5/16” Price £1.05 £1.12 £1.05 £1.12 £1.35 £1.39 3-WAY DIVIDER 2110 TUBE INSERT 2110 Part Number JGTSI250S JGTSI312S JGTSI375S TUBE ID 1/4” 5/16” 3/8” Part Number JGPI491612S TUBE OD INLET TUBE OD OUTLET 1/2” 3/8” Price £4.94 Price £0.12 £0.13 £0.14 LLDPE TUBE SUITABILITY FEATURES / BENEFITS • Water purification • Water conditioners • Ice makers • Misting systems • WRAS approved product • FDA approved • NSF 51& 61 • Strong • Good flexibility • Broad chemical compatibility SPECIFICATIONS Temperature range Pressure rating Construction Max. Temp: 150°C Burst pressure @ 20°C Linear low density polyethylene SUPPLIED IN FULL COILS ONLY JGPE - NATURAL 100 metre coils BLUE 100 metre coils 2120 Part Number JGPE04025N JGPE0604N JGPE0806N JGPE1007N JGPE1209N 4.0 6.0 8.0 10.0 12.0 2.5 4.0 6.0 7.0 9.0 15 15 10 10 10 2120 Price per coil Part Number £26.10 £28.90 £45.17 £64.64 £73.86 JGPE04025B JGPE0604B JGPE0806B JGPE1007B JGPE1209B RED 100 metre coils Price per coil 4.0 6.0 8.0 10.0 12.0 2.5 4.0 6.0 7.0 9.0 15 15 10 10 10 BLACK 100 metre coils 2120 Part Number JGPE04025R JGPE0604R JGPE0806R JGPE1007R JGPE1209R £26.10 £28.90 £45.17 £64.64 £73.86 4.0 6.0 8.0 10.0 12.0 2.5 4.0 6.0 7.0 9.0 15 15 10 10 10 2120 Price per coil Part Number £26.10 £28.90 £45.17 £64.64 £73.86 JGPE04025E JGPE0604E JGPE0806E JGPE1007E JGPE1209E Price per coil 4.0 6.0 8.0 10.0 12.0 2.5 4.0 6.0 7.0 9.0 15 15 10 10 10 £26.10 £28.90 £45.17 £64.64 £73.86 531 PNEUMATIC MINIATURE FITTINGS DESCRIPTION A new range of 4mm fittings especially designed for miniature pneumatic applications. LM fittings are suitable for use with plastic (polyethylene, Nylon and Polyurethane) and soft metal (copper and mild steel) tubes with an outside diameter of 4mm +0.05/ - 0.07. The tube to have a smooth outer surface and be free from burrs. Tube inserts should be used for soft or thin wall tubing or when using Polyurethane tube above 10 Bar to a maximum of 16 Bar. M3 and M5 threaded ends are designed to be hand tightened. MINIATURE STRAIGHT ADAPTOR MALE Part Number JGLM0103M3 JGLM0104M3 JGLM0104M5 TUBE OD 3 mm 4 mm 4 mm 2110 THREAD M3 M3 M5 MINIATURE STRAIGHT ADAPTOR MALE SUPERTHREAD with integral seal Part Number JGLM010411 TUBE OD 4 mm Price £2.55 £2.55 £1.70 2110 THREAD 1/8” MINIATURE STRAIGHT CONNECTOR TUBE OD 3 mm 4 mm Price £1.80 £1.90 Part Number JGLM0303E JGLM0304E TUBE OD 3 mm 4 mm Price £1.84 £1.95 MINIATURE SWIVEL ELBOW MALE 2110 Part Number JGLM0903M3 JGLM0904M3 JGLM0904M5 TUBE OD 3 mm 4 mm 4 mm THREAD M3 M3 M5 Price £2.85 £2.95 £2.25 MINIATURE EQUAL TEE 2110 BRASS MINIATURE TUBE INSERT 2110 Part Number JGLMTS04 2110 Price £2.25 2110 Part Number JGLM0403E JGLM0404E MINIATURE EQUAL ELBOW TUBE OD x TUBE ID 4 mm x 2.5 mm Price £0.35 Part Number JGLM0203E JGLM0204E TUBE OD 3 mm 4 mm Price £2.46 £2.63 BANJO FLOW CONTROLS DESCRIPTION Banjo Flow Controls are designed for installation directly into cylinder ports to give precise control. They regulate the speed of pneumatic cylinders and other actuators. John Guest Controls provide a neat compact assembly which can be oriented to a suitable position for the circuit arrangement prior to tightening. SPECIFICATIONS Temperature range Working pressure Materials Filtraction 5°C to 70°C 0.5 bar to 10 bar Acetal copolymer, brass, stainless steel and nitrile Air supply should be filtered to 50 micron The design offers especially precise adjustment through the control needle which is captive within its housing. Suitable for both soft metal and plastic tubing. ISO 1219-1 : 1991 BANJO FLOW CONTROL MALE BSP screwdriver slot BANJO FLOW CONTROL MALE BSP manual adjustment 2110 2110 Part Number JGCFM3604M5 JGCFM360411 JGCFM360611 JGCFM360612 JGCFM360812 532 TUBE OD 4 mm 4 mm 6 mm 6 mm 8 mm THREAD M5 1/8” BSP 1/8” BSP 1/4” BSP 1/4” BSP Price £15.86 £16.86 £17.10 £17.85 £17.99 Part Number JGLM1503M3E JGBFC3604M5 JGBFC360411 JGBFC360611 JGBFC360612 JGBFC360812 JGBFC361013 JGBFC361214 TUBE OD 3 mm 4 mm 4 mm 6 mm 6 mm 8 mm 10 mm 12 mm THREAD M3 M5 1/8” BSP 1/8” BSP 1/4” BSP 1/4” BSP 3/8” BSP 1/2” BSP Price £8.75 £12.93 £14.06 £13.18 £14.06 £14.06 £17.62 £22.03 PLUMBING AND HEATING FITTINGS BURST PRESSURE (FITTINGS) With copper or plastic pipe at 20°C: Speedfit fittings used with copper or Speedfit Barrier Pipe will withstand pressures well in excess of normal service conditions. HIGH TEMPERATURE Can withstand 114°C intermittently for short periods. The Speedfit System should not be used on an uncontrolled heat source. MAXIMUM TORGUE FIGURES (BSP & BSPT) Plastic threads are not generally as strong as brass threads. Customers should be aware of this when choosing products for their applications. Over tightening of plastic threads will cause undue stress and eventual cracking and leakage. The maximum torque figures for BSP and BSPT threads used on Speedfit plumbing products in mating threads conforming to relevant British or international threads standards. It is recommended that all installations are checked prior to use to determine that a seal has been made. WORKING TEMPERATURES AND PRESSURES STANDARDS Usual Working Temperature Max. Working Temperature Max. Working Pressure 20°C 20°C 12 bar Central Heating 82°C 105°C, short term Malfunction at 114°C 3 bar Hot Water (including unvented cylinders) 65°C 95°C 6 bar Application Cold Water (indirect and direct main) APPLICATIONS • Mains fed and indirect cold water systems • Vented and unvented hot water systems • Vented and sealed central heating systems IMPORTANT INFORMATION DO NOT USE FOR Gas, fuel oil or compressed air applications MAXIMUM TORQUE (BSP & BSPT) Threads Size 1/2” Plastic 3/4” 1/2” Brass 3/4” EQUAL STRAIGHT CONNECTOR REDUCING STRAIGHT COUPLER Maximum Torque 3.0 Nm 4.0 Nm 4.0 Nm 5.0 Nm 2140 Part Number JGPEM0410W JGPEM0415W JGPEM0422W JGPEM0428W TUBE OD 10 mm 15 mm 22 mm 28 mm Price £2.22 £1.65 £2.58 £6.52 2140 Part Number JGPEM201510 JGPEM202215 TUBE OD 15 mm 22 mm TUBE OD 10 mm 15 mm Price £3.86 £4.55 Suitable for central heating systems Suitable for central heating systems EQUAL ELBOW PE-COPPER COUPLER 2140 2140 Part Number JGJG601B JGJG603B JGJG602B TUBE OD 20 mm 25 mm 25 mm TUBE OD 15 mm 15 mm 22 mm Price £7.08 £10.60 £8.46 Suitable for Cold water only Part Number JGPEM0310W JGPEM0315W JGPEM0322W JGPEM0328W TUBE OD 10 mm 15 mm 22 mm 28 mm Price £2.72 £1.94 £3.11 £7.61 Suitable for central heating systems STEM TEE STEM ELBOW 2140 2140 Part Number JGPEM221010 JGPEM221515 JGPEM222222 TUBE OD 10 mm 15 mm 22 mm TUBE OD 10 mm 15 mm 22 mm Price £3.38 £3.81 £5.78 Part Number JGPEM532210 JGPEM532215 TUBE OD 22 mm 22 mm TUBE OD 22 mm 22 mm TUBE OD 10 mm 15 mm Price £4.47 £4.47 Suitable for central heating systems Suitable for central heating systems 533 PLUMBING AND HEATING FITTINGS REDUCING TEE EQUAL TEE 2140 Part Number JGPEM3015BW JGPEM3015AW JGPEM3022CW JGPEM3022BW JGPEM3022DW JGPEM302210 JGPEM3022AW JGPEM3028BW JGPEM3028AW JGPEM3028DW TUBE OD 15 mm 15 mm 15 mm 22 mm 22 mm 22 mm 22 mm 28 mm 28 mm 28 mm TUBE OD 10 mm 15 mm 15 mm 15 mm 15 mm 22 mm 22 mm 22 mm 28 mm 22 mm TUBE OD 10 mm 10 mm 22 mm 15 mm 22 mm 10 mm 15 mm 22 mm 22 mm 28 mm Price £4.24 £4.71 £4.71 £4.71 £4.71 £4.71 £4.71 £11.84 £11.84 £11.84 Suitable for central heating systems 2140 Part Number JGPEM0210W JGPEM0215W JGPEM0222W JGPEM0228W TUBE OD 10 mm 15 mm 22 mm 28 mm Price £3.14 £2.81 £4.18 £10.74 Suitable for central heating systems BENT TAP CONNECTOR BSP 2140 Part Number JGPEMBTC154 FEMALE COUPLER TAP CONNECTOR FEMALE BSP TUBE OD 15 mm THREAD 1/2” BSP Price £4.05 Suitable for central heating systems 2140 Part Number JGPSE3210W JGPSE3201W JGPSE3203W JGPSE3202W TUBE OD 10 mm 15 mm 15 mm 22 mm THREAD 1/2” BSP 1/2” BSP 3/4” BSP 3/4” BSP Price £3.10 £1.80 £3.93 £2.70 Suitable for central heating systems STRAIGHT TAP CONNECTOR BSP 2140 Part Number JGPEMSTC154 JGPEMSTC156 JGPEMSTC226 TUBE OD 15 mm 15 mm 22 mm THREAD 1/2” BSP 3/4” BSP 3/4” BSP Price £3.21 £3.81 £4.19 Suitable for central heating systems PIPE INSERT FOR COMPRESSION FITTINGS 2140 Part Number JGTSM10N JGSTM15N JGSTM22N JGSTM28N TUBE OD 10 mm 15 mm 22 mm 28 mm Price £0.33 £0.33 £0.38 £0.59 STOP END 2140 Part Number JGPSE4610W JGPSE4615W JGPSE4622W TUBE OD 10 mm 15 mm 22 mm Price £2.14 £2.22 £2.68 Suitable for central heating systems REDUCER 2140 Part Number JGPEM061510 JGPEM062215 JGPEM062815 JGPEM062822 TUBE OD 15 mm 22 mm 28 mm 28 mm TUBE OD 10 mm 15 mm 15 mm 22 mm Price £1.90 £2.46 £5.07 £5.51 Suitable for central heating systems PIPE INSERT SUPERSEAL 2140 Part Number JGSTS10 JGSTS15 JGSTS22 JGSTS28 TUBE OD 10 mm 15 mm 22 mm 28 mm Price £0.35 £0.35 £0.42 £0.71 TANK CONNECTOR 2140 Part Number JGCM0715S JGCM0722S JGCM0728S TUBE OD 15 mm 22 mm 28 mm Suitable for Cold water tanks only Requires hand tightening only Price £2.76 £3.52 £13.52 PLUG 2140 Part Number JGPL10 JGPL15 JGPL22 JGPL28 TUBE OD 10 mm 15 mm 22 mm 28 mm Suitable for central heating systems 534 Price £0.86 £0.92 £1.04 £1.70 VALVES STOP VALVE BRASS STOP VALVE BODY AND HEAD DZR BRASS 2140 2140 Part Number JG15BSC TUBE OD 15 mm Price £17.43 Suitable for central heating systems WASHING MACHINE TAP BSP Part Number JG15STV JG22STV TUBE OD 15 mm 22 mm Price £7.87 £11.96 Not suitable for central heating systems Hot and Cold water only, 65°C maximum EMERGENCY SHUT OFF TAP 2140 2140 Part Number JG15APT TUBE OD 15 mm THREAD 3/4” BSP Price £5.41 Part Number JG15ESOT TUBE OD 15 mm Price £5.97 Not suitable for central heating systems Hot and Cold water only, 65°C maximum Not suitable for central heating systems Hot and Cold water only, 65°C maximum BRASS SERVICE VALVE PLASTIC SERVICE VALVE 2140 Part Number JG15HSV-BRA TUBE OD 15 mm Price £12.35 Suitable for central heating systems 2140 Part Number JG15SV JG22SV TUBE OD 15 mm 22 mm Price £6.34 £10.15 Not suitable for central heating systems Hot and Cold water only, 65°C maximum SERVICE VALVE BRASS CHROME PLATED 2140 Part Number JG10HSV JG15HSV JG22HSV TUBE OD 10 mm 15 mm 22 mm Price £11.16 £13.38 £30.04 SERVICE VALVE with tap connector BSP BRASS CHROME PLATED Part Number JG15PTSV JG22PTSV 2140 TUBE OD 15 mm 22 mm THREAD 1/2” BSP 3/4” BSP Price £13.28 £32.58 Suitable for central heating systems Suitable for central heating systems BALL VALVE BRASS CHROME PLATED DOUBLE CHECK VALVE 2140 Part Number JG10BV JG15BV JG22BV TUBE OD 10 mm 15 mm 22 mm Price £15.72 £17.18 £34.31 2140 Part Number JG15DCV TUBE OD 15 mm Price £11.64 Not suitable for central heating systems Hot and Cold water only, 65°C maximum Suitable for central heating systems Each valve has a red and blue indice fol BRASS DRAIN COCK DZR BRASS i Man 2140 Part Number JG15BDC lso ds a TUBE OD 15 mm Price £7.48 le ilab ava ct nta e co leas n, p JG atio am. m r e t fo e in l sales mor a For echnic t our Suitable for central heating systems Speedfit Drain Cocks cannot be used where collet covers are fitted They can be used with a standard fitting with a collet clip Please Note: A collet cover can not be used on a Speedfit end assembly with a drain cock 535 FLEXI HOSE AND BARRIER PIPE FLEXI HOSE FEMALE BSP - 300mm length FLEXI HOSE FEMALE BSP - 500mm length 2140 Part Number JGFLX34 JGFLX35 JGFLX15 JGFLX16 JGFLX22 TUBE OD 10 mm 15 mm 15 mm 15 mm 22 mm THREAD 1/2”BSP 3/8”BSP 1/2”BSP 3/4”BSP 3/4”BSP Price £6.71 £6.71 £6.06 £7.66 £8.32 Not suitable for central heating systems FLEXI HOSE 300mm length 2140 Part Number JGFLX18 JGFLX20 JGFLX19 JGFLX23 * TUBE OD 15 mm 15 mm 22 mm 22 mm THREAD 1/2”BSP 3/4”BSP 3/4”BSP 3/4”BSP Price £8.78 £9.91 £10.53 £0.00 *Full Bore Not suitable for central heating systems FLEXI HOSE 500mm length 2140 Part Number JGFLX33 JGFLX17 JGFLX26 TUBE OD 15 mm 15 mm 22 mm TUBE OD 10 mm 15 mm 22 mm Price £5.17 £7.52 £9.20 Not suitable for central heating systems Hot and Cold water only, 65ºC maximum FLEXI HOSE with service valve FEMALE BSP - 300mm length 2140 Part Number JGFLX21 JGFLX27 TUBE OD 15 mm 22 mm TUBE OD 15 mm 22 mm Price £11.05 £12.55 Not suitable for central heating systems Hot and Cold water only, 65ºC maximum FLEXI HOSE with service valve FEMALE BSP - 500mm length 2140 Part Number JGFLX24 JGFLX37 ** JGFLX25 * TUBE OD 15 mm 15 mm 22 mm THREAD 1/2” BSP 1/2” BSP 3/4” BSP Price £17.42 £0.00 £0.00 *Full Bore **Plastic Valve with Handle Not suitable for central heating systems TUBE OD 15 mm TUBE OD 15 mm 15 mm 22 mm THREAD 1/2” BSP 3/4” BSP 3/4” BSP Price £19.06 £20.97 £0.00 *Full Bore Not suitable for central heating systems FLEXI HOSE for monoblock mixers MALE - 300mm length Part Number JGFLX29 2140 Part Number JGFLX31 JGFLX38 JGFLX32 * FLEXI HOSE - ELBOW PATTERN FEMALE - 300mm length 2140 THREAD M12 Price £11.46 Not suitable for central heating systems Hot and Cold water only, 65ºC maximum Price per pair 2140 Part Number JGFLX36 TUBE OD 15 mm THREAD 1/2” BSP Price £8.11 Not suitable for central heating systems Hot and Cold water only, 65ºC maximum SPEEDFIT BARRIER PIPE 2140 Part Number JG10BPEX-25 JG10BPEX-50 JG10BPEX-10 JG15BPEX-25 JG15BPEX-50 JG15BPEX-10 JG15BPEX-12 JG15BPEX-15 JG22BPEX-25 JG22BPEX-50 TUBE OD 10 mm 10 mm 10 mm 15 mm 15 mm 15 mm 15 mm 15 mm 22 mm 22 mm COIL LENGTH 25 mtr 50 mtr 100 mtr 25 mtr 50 mtr 100 mtr 120 mtr 150 mtr 25 mtr 50 mtr Price £40.27 £72.49 £144.97 £41.89 £83.75 £167.52 £201.34 £251.27 £82.16 £164.29 Suitable for central heating systems Price per coil The pipe has an inner barrier to stop the ingress of atmosphere 536 SPEEDFIT BARRIER PIPE 2140 Part Number JG15BPEX-2L JG15BPEX-3L JG15BPEX-6L JG22BPEX-2L JG22BPEX-3L JG22BPEX-6L JG28BPEX-3L TUBE OD 15 mm 15 mm 15 mm 22 mm 22 mm 22 mm 28 mm STRAIGHT LENGTH 2 mtr 3 mtr 6 mtr 2 mtr 3 mtr 6 mtr 3 mtr Price £3.35 £5.04 £9.96 £6.57 £10.28 £19.72 £13.53 Suitable for central heating systems Price per length The pipe has an inner barrier to stop the ingress of atmosphere