Cold Recycler and Soil Stabilizer WR 200 XL i

Cold Recycler and Soil Stabilizer WR 200 XL i

Technical specification
Cold Recycler and Soil Stabilizer
WR 200 XL i
Technical specification
Cold recycler and soil stabilizer WR 200 XL i
Milling and mixing rotor
Working width (max.)
94” (2,400 mm)
Working depth *
0 – 20” (0 – 500 mm)
Tool spacing
/4” (20 mm)
3
Number of tools
170
Drum diameter with tools
58” (1,480 mm)
Engine
Manufacturer
Mercedes Benz / MTU
Type
OM 470 LA / 6R 1100
Number of cylinders
6
Power at 1,900 rpms
308 kW / 412 HP / 418 PS
Maximum power at 1,700 rpms
320 kW / 429 HP / 435 PS
Displacement
652.9 in3 (10,700 cm3)
Fuel consumption
19.8 gal / h (75 l / h)
Fuel consumption in field mix
9.2 gal / h (35 l / h)
Emission standards
EC Stage 4 / US Tier 4f
Electrical system
24 V
Filling capacities
Fuel tank
219 gal (830 l)
AdBlue® / DEF tank
21 gal (80 l)
Hydraulic fluid tank
53 gal (200 l)
Water tank
100 gal (380 l)
Driving properties
Travel speed in milling and travel gear
0 – 689 ft / min (7.8 mph), 0 – 210 m / min (12.6 km / h)
Transversal inclination, max.
8 °
Ground clearance
approx. 16” (400 mm)
Tires
Tire size, front / rear
620 / 75 R26
Shipping dimensions
Truck transport dimensions (L x W x H)
30’ 1” x 9’ 10” x 9’ 10” (9,160 x 2,990 x 3,000 mm)
*1 = the maximum working depth may deviate from the value indicated, due to tolerances and wear
Cold recycler and soil stabilizer WR 200 XL i
Dimensions in American standard and mm
11’ 6” (3,500)
32” (810)
26”
(650) *1
9’ 10” (3,000)
machine center of gravity *2
11’ 10” (3,600)
8’ 4” (2,540)
20’ 2” (6,140)
25’ 5” (7,740)
29’ 4” (8,930)
19”
(480)
5’ 7” (1,700)
94” (2,400)
9’ 10” (2,990)
30’ 1” (9,160)
*1 = with injection system
*2 = based on operating weight, CE
2 // 3
Rear view of WR 200 XL i
20” (500)
Dimensions in American standard and mm
approx.
9” (225)
16” (405)
94” (2,400)
Machine weights WR 200 XL i
Empty weight of machine in standard design without filling media
Operating weight, CE *
Operating weight, max. (machine with full tanks and heaviest range of equipment)
55,116 lbs (25,000 kg)
56,659 lbs (25,700 kg)
59,966 lbs (27,200 kg)
Weights of filling media increasing empty weight
Water tank filling in kg
838 lbs (380 kg)
Diesel tank filling in kg (0.83 kg / l)
1,521 lbs (690 kg)
AdBlue®- / DEF-filling in kg
176 lbs (80 kg)
Optional equipment features increasing / reducing empty weight
Driver
165 lbs (75 kg)
Weight of 5 cutting tool containers
276 lbs (125 kg)
Lighter-weight optional equipment features, such as:
air-conditioning system, drum turning device, high-pressure cleaner etc.
Single ESL: Injection system for water or bitumen emulsion
ESL 1800 L: Injection system for water, 1,800 l / min
* = machine in standard design, half-full water tank, half-full fuel tank, half-full DEF tank, driver, on-board tools
705 lbs (320 kg)
1,014 lbs (460 kg)
904 lbs (410 kg)
Turning radius of WR 200 XL i
Dimensions in American standard and mm
Rmin = 23’ (7,000)
Rmin = 23’ 7” (7,200)
Rmin = 9’ 8” (2,950)
Rmin = 10’ 10” (3,300)
Milling rotor speed * WR 200 XL i
Ø 12” (315 mm)
Ø 12” (315 mm)
Ø 14” (355 mm)
Engine speed
WR 200 XL i
Ø 14” (355 mm)
Ø 16” (400 mm)
Ø 16” (400 mm)
Ø 14” (355 mm)
Ø 16” (400 mm)
Ø 12” (315 mm)
108 rpms
137 rpms
154 rpms
117 rpms
149 rpms
168 rpms
127 rpms
161 rpms
181 rpms
* = the milling rotor speed depends on the engine speed setting
4 // 5
Equipment features WR 200 XL i
Basic machine
Free view of the milling edge, right
Integrated water tank
Right-hand wheels within the milling width
Engine management for optimal milling performance
Cooling system with temperature-governed fan speed
Effective engine soundproofing
Large storage space for cutting tool containers
Air compressor system
Standard painting in Wirtgen white with orange stripes
Special painting in one, two or several colors
Electrically operated diesel refueling pump
“Wiggins” quick-filling system for diesel refueling
Hydraulically operated high-pressure water cleaner, 190 bar
Battery-operated hydraulic module for milling drum turning device, cutting tool extractor and emergency functions
Milling and mixing unit
Mechanical direct drive via power belt with automatic belt tensioner
Variable cutting speed by combining:
- 3 selectable engine speeds
- 3 adjustable belt pulley arrangements
Power control during initiation of the milling process
Down-milling or up-milling option depending on the working direction
Hydraulically adjustable crusher bar
Hydraulically adjustable scraper blade
Continuous hydraulic raising and lowering of the milling rotor
Variable mixing chamber
Drum turning device for cutting tool replacement
Pneumatic cutting tool driver and extractor
Hydraulic cutting tool extractor
Milling and mixing rotor
Milling and mixing rotor, milling width 94” (2,400 mm), HT05 toolholder system, tool spacing 3/4” (20 mm)
Milling and mixing rotor, milling width 94” (2,400 mm), quick-change toolholder system HT11, tool spacing 3/4” (20 mm)
Replaceable edge ring segments
= standard equipment
= optional equipment
– = not available
Equipment features WR 200 XL i
Injection system
Openings for injections systems closed by means of cover panels
Single ESL: Injection system for water or bitumen emulsion, each 212 gal / min (800 l / min)
ESL 1800 L: Injection system for water, 476 gal / min (1,800 l / min)
Suction hose for water or bitumen emulsion
Machine control and leveling system
Color screen for machine data, parameter settings and diagnostics
Cross slope sensor for automatic cross slope adjustment
Programmable automatic lowering and raising of the milling and mixing rotor to start or stop the milling process
Automatic functions for increased machine operator comfort
Operator’s platform
Anti-vibration mounted comfort operator’s cabin
ROPS and FOPS integrated in cabin frame
Windows with windscreen wipers for an optimal view of work areas
Cabin can be moved out over the right side of the machine
Reversing camera with visual reverse assist integrated in color screen
Screen system including 3 additional cameras and display on additional screen
Operator’s stand can be swivelled about 90 degrees
Heating system and roof hatch
Automatic climate control system integrated in roof lining
Various storage and shelving options
12-volt and 24-volt sockets
Working lights integrated in cabin roof
Mirrors in the front section of the machine
Radio system with CD / MP3 / USB / Bluetooth and two loudspeakers
Job data printer to keep a log of binder consumption and area performance
Chassis and height adjustment
Continuously adjustable hydraulic all-wheel drive
Four-fold full-floating axle for high machine stability
All-wheel steering with various steering modes
Miscellaneous
Lighting package with 14 halogen working lights
Lighting package with 12 LED and 2 halogen working lights
Comprehensive safety package with emergency stop switches
Comprehensive toolkit with lockable toolbox
European design type certification, GS mark (Geprüfte Sicherheit = Tested Safety) and CE conformity
Warranty of 12 months or 1,000 engine operating hours
Machine commissioning by qualified personnel
= standard equipment
= optional equipment
– = not available
6 // 7
Wirtgen America Inc.
6030 Dana Way · Nashville, TN 37013, USA
Phone: (615) 501-0600 · Fax: (615) 501-0691
Internet: www.wirtgenamerica.com
Illustrations are without obligation. Technical details are subject to change without notice.
Performance data depend upon operating conditions. – No. 2445065 81-22 US-02/15 © by Wirtgen GmbH 2015. Printed in Germany