Skid Mounted and Trailer Mounted Air-Blast Systems

Always Innovative. Always Reliable.
Skid Mounted and Trailer Mounted Air-Blast Systems
Built Marco Tough
By packaging a high performance air-blasting system on our custom skid or trailer, Marco has created high production
air-blast systems with unmatched portability and versatility. These systems combine an Air-Blast Pot, Moisture
Management System, and a 6-Outlet 286-Series Airline Filter together on a skid or trailer for ease of portability.
» PORTABILITY
The Skid Mounted and Trailer Mounted Air-Blast Systems provide
the flexibility to pull up to a work site, hook-up your air hose,
breathing line, and abrasive blasting hose and be air-blasting
within minutes.
The Skid Mounted Air-Blast System fits in a standard 4’ x 6’
truck bed, allowing you to transport your air-blast system and air
compressor with one truck. The Skid Mounted Air-Blast System
includes fork pockets for easy maneuverability with a mechanical
lifting device or lifting eyes for lifting the system.
The Trailer Mounted Air-Blast System combines all of the Air-Blast
System components on a towable 5’ x 8’ trailer. The Trailer Mounted
Air-Blast System can be easily towed from one work site to the next
behind your work truck. Three adjustable fold-down legs provide
the trailer with stability and allows you to level and balance your
equipment on the work site.
»ULTIMATE PRODUCTIVITY PACKAGE
By packaging an Air-Blast Pot, Moisture Management System,
and a 286-Series Airline Filter on a custom skid or trailer, Marco has
created a well-organized central hub for your air-blast system. By
centralizing your air-blast equipment, you are able to minimize the
time needed to set-up and tear down your air-blast equipment.
» APPLICATION FLEXIBILITY
The all-in-one Skid Mounted and Trailer Mounted Air-Blast Systems
provide you with the flexibility to keep all of the components on the
base, or unbolt select pieces of equipment from the base to position
them in different locations around the work site.
Each Air-Blast System comes
with a Heavy-Duty lid and
screen. The screen helps to
prevent large debris from getting
into your Air-Blast Pot and mixing
with your abrasive. The lid helps
keep rain and debris from getting
into your Air-Blast Pot.
Marco® is a registered trademark of Marco®.
Built-in Hose Storage Racks
make storing Air Hose and
Abrasive Blasting Hose simple
and convenient. These racks
save you time by keeping your
hoses in one easily accessible
location.
The 6-Outlet, 286-Series Airline
Filter features a seven stage
filtration process to catch and
remove moisture, odors, and
other particulates from the air
supply. The 286-Series Airline
Filter has six, 3/8” outlets
to supply conditioned air to
respirators or pneumatic tools.
ABRASIVES | BLASTING | ENGINEERED SYSTEMS | PAINTING | RENTAL | SAFETY | SERVICE & REPAIR
Skid Mounted and Trailer Mounted Air-Blast Systems
» mounting OPTIONS
TRAILER Mounted Air-Blast System
The heavy-duty 5' x 8' trailer includes a steel
diamond plate base and rear gate for easy
access to the air-blast equipment. Three
adjustable fold-down legs provide the trailer with
stability and allow you to level and balance your
equipment on the work site.
» Surface Width: 5 Feet
» Surface Length: 8 Feet
» Total Trailer Length: 11 Feet, 7 Inches
» Total Trailer Height: 6 Feet, 5 Inches
» Total Trailer Width: 6 Feet, 6 Inches
» Total System Dry Weight
» 6.5 Cu. Ft. Systems: 1,900 lbs.
» 3.5 Cu. Ft. Systems: 1,800 lbs.
» Gross Vehicle Weight Maximum: 2,990 lbs.
Skid Mounted Air-Blast System
The heavy-duty skid includes a steel diamond plate
base and hose storage racks. It easily fits in a
standard 4’ x 6’ truck bed, allowing you to transport
your air-blast system and pull your air compressor
with one truck. Four lifting eyes are located on the
base as an alternative lifting option.
»
»
»
»
Height: 4 Feet, 10 Inches
Width: 4 Feet
Length: 6 Feet
Total System Dry Weight
» 6.5 Cu. Ft. Systems: 1,200 lbs.
» 3.5 Cu. Ft. Systems: 1,100 lbs.
WWW.MARCO.US | 800.BLAST.IT | 800.252.7848 | 563.324.2519 | FAX: 563.324.6258 | [email protected]
Skid Mounted and Trailer Mounted Air-Blast Systems
» aIR-BLAST POT OPTIONS
6.5 Cu. Ft. M-Series
Air-Blast Pot
6.5 Cu. Ft. HP-Series
Air-Blast Pot
m-sERIES AIR-BLAST POTS
With a low loading height, the Marco® M-Series
Air-Blast Pot makes it easy to fill. The 90° cone
bottom allows for smooth flow of abrasive to the
precision Bantam Abrasive Metering Valve. The
M-Series Air-Blast Pots include our most popular
remote control system, the KwikFire™ 125 Remote
Control System. The remote control system mounted
on the side of the vessel provides easy access to the
valves. All M-Series Air-Blast Pots are rated at 150
PSI working pressure for use with today’s high output
compressors, providing higher blasting pressure at
the nozzle, increasing productivity.
HP-SERIES AIR-BLAST POTS
The HP-Series Air-Blast Pots feature a pressure hold
configuration which minimizes response time between
stopping & starting, increasing production rates. The
advantage of a pressure hold configuration is created
by a constantly pressurized tank that does not need
to re-pressurize each time the remote control switch
is engaged. The 90° cone bottom allows for smooth
flow of abrasive to the precision Maxum III Abrasive
Metering Valve. All HP-Series Air-Blast Pots are rated
at 150 PSI working pressure for use with today’s
high output compressors, providing higher blasting
pressure at the nozzle, increasing productivity.
» Moisture management SYSTEMS options
The 400 CFM Cart Mounted Aftercooler and 800 CFM
Moisture Separator provides a 3-stage conditioning
process to remove moisture, oils, and other debris;
providing a consistent supply of drier and cleaner
air to pneumatic equipment. By removing these
contaminants which cause corrosion, component
binding, and gasket erosion, the useful life of your
pneumatic equipment will be extended. This moisture
management system comes standard on all
6.5 Cu. Ft. Air-Blast Systems.
KwikFire™ is a trademark of Marco®. Marco® is a registered trademark of Marco®.
3.5 Cu. Ft. M-Series
Air-Blast Pot
3.5 Cu. Ft. HP-Series
Air-Blast Pot
The 250 CFM Aftercooler with Coalescing Tank
includes a 3-stage conditioning process to
remove moisture, oils, and other debris, providing
a consistent supply of drier and cleaner air
to pneumatic equipment. By removing these
contaminants which cause corrosion, component
binding, and gasket erosion, the useful life of
your pneumatic equipment will be extended. This
moisture management system comes standard on
all 3.5 Cu. Ft. Air-Blast Systems.
ABRASIVES | BLASTING | ENGINEERED SYSTEMS | PAINTING | RENTAL | SAFETY | SERVICE & REPAIR
Skid Mounted and Trailer Mounted Air-Blast Systems
» OPTIONAL ACCESSORIES
Abrasive Blasting Hose
Barricade Carbon
Monoxide Monitor
Air Hose
» KEY BENEFITS
• A
ll-In-One Skid Mounted and Trailer Mounted
design for quick equipment deployment,
unmatched portability, and exceptional versatility
• A Moisture Management System removes
moisture and contaminants from the air supply
for the air-blast pot and pneumatic tools
• 6-Outlet, 286-Series Airline Filter catches and
removes moisture, odors, organic vapors, and
other particles to supply conditioned air to
air-fed respirators or pneumatic tools
• Built-in Hose Storage Racks for Abrasive
Blasting Hose, Breathing Line, and Air Hose
• Heavy-Duty Air-Blast Pot Lid and Screen
Air-Fed Respirator with
Breathing Line
Air-Blast Nozzles
» OPTIONAL ACCESSORIES
•
•
•
•
•
Abrasive Blasting Hose
Barricade Carbon Monoxide Monitor
Air-Fed Respirator with Breathing Line
Air Hose
Air-Blast Nozzles
WWW.MARCO.US | 800.BLAST.IT | 800.252.7848 | 563.324.2519 | FAX: 563.324.6258 | [email protected]
© 2012 Marco 105M339 04/12