spencer-harris 10m - Spencer Harris Machinery

spencer-harris 10m - Spencer Harris Machinery

SPENCER-HARRIS
10M
Spencer-Harris Machine & Tool Company
520 E. Broadway
Gladewater, Texas 75647
(903) 845-2117
SPENCER-HARRIS MODEL 10M DRAWWORKS
SPECIFICATIONS
RATED INPUT HORSEPOWER
DRUM SIZE
LeBUS GROOVING
1000
24” X 48”
1.25” DRILL LINE
AUXILIARY BRAKE
DRUM CLUTCH
ROTARY DRIVE CLUTCH
ENGINE COMPOUND
ENGINE CLUTCHES
TRANSMISSIONS W/ TC
(5 FORWARD SPEEDS
ONE REVERSE)
CATHEADS / AUX. WINCH (OPTIONAL)
LINE PULL (MAKE-UP)
LINE PULL (BREAK-OUT)
EATON 236 WCBD
EATON 38VC1200
EATON 24CB500
2 @ 500HP EA.
18CB500 #75
ALLISON 5610 w/ TC 680
HYDRAULIC
9400 LBS. @ 2000 PSI
16300 LBS. @ 2000 PSI
DRUM SPEEDS
LOW ( ENGINE @ 1400 RPM w/ TC) 60 RPM
HIGH (
“
@ 1800 RPM w/o TC) 438 RPM
ROTARY SPEEDS
LOW (ENGINE @ 1400 RPM)
HIGH (
“
1800 RPM)
45 RPM
230 RPM
SINGLE LINE PULL W/ 10 LINES STRUNG
HOOK LOAD CAPACITY
“
67,818 LBS.*
550,000 LBS.*
SKID DIMENSIONS
16.25”H X 7’-11.5”W X 28’L
CENTER OF DRUM OFFSET 5.625” TO DRILLER’S SIDE FROM
CENTERLINE OF WELL
*THIS INFORMATION IS FOR REFERENCE ONLY. ACTUAL CAPACITIES ARE DETERMINED BY
ENGINE/TRANSMISSION COMBINATIONS.
Spencer Harris
7M
Spencer Harris LLC.
520 E. Broadway Ave.
Gladewater, Texas 75647
(903) 845-2117
SPENCER-HARRIS MODEL 7000 DRAWWORKS
SPECIFICATIONS
RATED INPUT HORSEPOWER
DRUM SIZE
LeBUS GROOVING
700
14” X 39”
1.125” DRILL LINE
AUXILIARY BRAKE
DRUM CLUTCH - LOW
HIGH
ROTARY DRIVE CLUTCH
ENGINE COMPOUND
W/ TORQUE CONVERTERS
ENGINE CLUTCHES
CATHEADS (OPTIONAL)
EATON 224 WCBD
EATON 32CB525 #75
EATON 22CB500 #75
EATON 15CB500
2 @ 350HP EA.
16CB500
TORQ-TITE 16”
or
FLO-DRAULIC
MAX DRUM SPEEDS
LOW ( ENGINE @ 1260 RPM w/ TC) 140 RPM
HIGH (
“
@ 1800 RPM w/o TC) 544 RPM
ROTARY COUNTERSHAFT SPEEDS
LOW (ENGINE @ 1260 RPM)
HIGH (
“
1800 RPM)
163 RPM
634 RPM
HOOK LOAD CAPACITY
300,000 LBS.*
SKID DIMENSIONS
7’-11.5”W X 28’L
*THIS INFORMATION IS FOR REFERENCE ONLY. ACTUAL CAPACITIES ARE DETERMINED BY ENGINE/TORQUE
CONVERTER COMBINATIONS.
Spencer Harris
Mobile Drilling Rig
Spencer Harris LLC
520 E. Broadway
Gladewater, Texas 75647
(903) 845-2117
Spencer Harris Mobile Drilling Rig
100’ TELESCOPIC MAST
HYDRAULIC RAISED
MECHANICAL TELESCOPING
300K STATIC HOOK LOAD RATING
FOLDING RACKING BOARD WITH HANDRAIL
RACKING CAPACITY – 8000 FT (4 ½” OD DRILL PIPE)
PLUS DRILL COLLARS
5 SHEAVE CROSS-OVER TYPE CROWN BLOCK
WITH 4 – 30” & 1 – 36” ROLLER BEARING SHEAVES
GROOVED FOR 1 ⅛” DIAMETER DRILL LINE
10’ WIDE x 32’ LONG GOOSENECK TRAILER
WITH 3 AXLE – 90K SUSPENSION
WITH FULL LENGTH WALKWAYS WITH HANDRAILS
DEADLINE ANCHOR
STAIRS – ONE SET
ROTARY SUBSTRUCTURE SECTION
8’ WIDE x 30’ LONG x 11’-6”
9’-3” CLEAR HEIGHT UNDER ROTARY BEAMS
375K STATIC ROTARY LOAD CAPACITY
HANDRAILS
STAIRS – ONE SET
PIPE SETBACK SUBSTRUCTURE SECTION
8’ WIDE x 30’ LONG x 11’-6” HIGH
250K STATIC SETBACK LOAD CAPACITY
HANDRAILS
STAIRS – ONE SET
SIMULTANEOUS STATIC SUBSTRUCTURE CAPACITY 550K
TRAILER RAMP
8’ WIDE x 30’ LONG x 5’-2” HIGH
WITH FOLDING STABILIZER JACKSCREWS
WITH 8’ WIDE x 18’ LONG x 2’-9” REMOVABLE PONY RAMP
SPENCER HARRIS MODEL 7000 DRAWWORKS
700 HP INPUT
DRUM WITH LeBUS GROOVING FOR 1 ⅛” DRILL LINE
ROTARY DRIVE
224 AUXILIARY AIR BRAKE
EATON AIR CLUTCHES
32” LOW
22” HIGH
16” ROTARY DRIVE
16” ENGINES
2 ENGINE COMPOUND
2 CATERPILLAR C13 ENGINES WITH OILWORKS TORQUE
CONVERTERS
OILBATH CHAINGUARDS WITH SPRAY LUBRICATION
CHAIN DRIVES
1 ¼” TRIPLE @ INPUT
2” SINGLE @ DRUM DRIVE
2” SINGLE @ ROTARY DRIVE
1 ½” DOUBLE @ AUXILIARY BRAKE
HYDRAULIC PUMP/SYSTEM FOR MAST/TRAILER FUNCTIONS
MAKE-UP/BREAK-OUT CATHEADS
42” x 8” WATER CIRCULATING DRUM BRAKES
DRILLER’S CONSOLE WITH CONTROLS AND INSTRUMENTATION