series 70 - Sharpe® Valves

Transcription

Valves, Automation & Controls
SERIES 70
HIGH PERFORMANCE
FLANGED FULL PORT
BALL VALVE
Fully Compliant
API 608 5th Edition
Class 150 | 300
FOR REFINING, CHEMICAL &
PETROCHEMICAL PROCESSING
Added Features | Enhanced Performance | Design Flexibility
SERIES 70 HIGH PERFORMANCE FLANGED BALL VALVE
ACCESSORIES:
Valves, Automation & Controls
Integrated Fugitive Emission Ports
One or two ports can be drilled and tapped
into our specially designed body. Ports align
with a lantern ring precisely located between
an upper and lower set of stem packing to
allow monitoring of emissions.
Lockable Stem Extension
An option to move the valve top interface
away from the pipe line to accommodate insulation.
Tamper Proof Locking Device
Upgrade from the standard locking device
found on all Sharpe Valves to our unique spring
loaded Tamper Proof Locking Device.
Spring Return Handle
Spring return handle - ensures that the valve
cannot be left open (or closed).
Cast Mounting Brackets
Cast stainless steel brackets with hole patterns
conforming to ISO 5211 on top and bottom for
actuation mounting.
Safety locking holes for securing valves during
maintenance , (requires special drilled couplers).
Wide tool clearance for installation, aesthetic
design and open visibility.
Steam Jackets
Steam jackets - enables the valves to be kept at
a controlled temperature.
S mith -C ooper I nternational
•
T oll F ree (877) 774-2773
•
F ax (708) 562-9250
•
www.smithcooper.com
www.sharpevalves.com
2
VALVE TRIM
Operational flexibility and
process compatibility of stem
assemblies
Stem Packing Configurations
CHEVRON
A multiple pack of chevron stem seals for better
sealing, offered in PTFE, TFM® or Nova materials.
GRAPHITE
A double pack of flexible graphite seals for
high temperature applications or fire safe
requirements.
Standard Stem Assembly
Graphite
Chevron
CHEVRON with FUGITIVE EMISSION PORTS
Two sets of Chevron stem seals in in PTFE, TFM®
or Nova materials separated by a stainless steel
lantern ring to allow leak detection through the
optional integrated fugitive emission port(s).
GRAPHITE with FUGITIVE EMISSION PORTS
Two sets of Graphite stem seals, for high
temperature applications or fire safe
requirements, separated by a stainless steel
lantern ring to allow leak detection through the
optional integrated fugitive emission port(s).
Fugitive Emission Assembly
HIGH CYCLE - unique design for demanding high
cycle applications that consist of multi-system
sealing devices in the stem bonnet.
Chevron
Graphite
Increased Stem Sealing Area
Increased length allows for a range of sealing
combinations for severe applications and other
stringent design demands.
Advanced Stem Design
High Cycle Assembly
Two pairs of concave and opposing spring
washers provide additional, live loaded,
compensation for seal wear and self-adjust with
pressure.
Blowout proof stem design ensures that the
stem cannot be blown out by accidental media
pressure rise.
Anti-Static device to ensure electrical continuity
between the ball and body to prevent build-up
of static electricity.
•
T oll F ree (877) 774-2773
•
F ax (708) 562-9250
•
www.smithcooper.com
3
Parts & Materials
Series 70 - ½" - 2"
Fugitive Emission Monitoring
with Lantern Ring Packing
High Temperature or
Fire Safe
Chevron
High Temperature or
Fire Safe Packing
Chevron
Packing
Sizes ½" - 2"
ITEM DESCRIPTION MATERIAL
Body
Carbon Steel ASTM A216 WCB
316 Stainless Steel
ASTM A351 CF8M
Alloy 20 ASTM A351 CN7M
1
***
QTY
1
ITEM
7*
8*
9*
10*,**
11*
End Piece
316 Stainless Steel
ASTM A351 CF8M
316L Stainless Steel ASTM A351 CF3M
(used for stainless steel weld ends)
***
316 Stainless Steel
Alloy 20 ***
1
Seat
PTFE, RTFE, TFM®, Nova, PEEK
2
Body Seal
Stem
PTFE, Graphite
316 Stainless Steel
17-4PH
Alloy 20
***
1
1
2
Ball
3
4*
5*
6
12*
13
14
15*
16
1
17
18
19
20
21
22
23
24
25
DESCRIPTION
Thrust Bearing - Bottom
Thrust Bearing - Top
Stem Packing - Bottom
Stem Packing - Middle
Stem Packing - Top
Stem Packing
Lantern Ring
Gland Packing
Belleville Washer
Packing Nut
Lock Tab
Handle
Handle Nut
Anti - Static Ball
Anti - Static Spring
Stop Pin
Lock Plate
Bolt
Nut
MATERIAL
Nova, PEEK
Nova
PTFE, TFM®, Nova
PTFE, TFM®, Nova
PTFE, TFM®, Nova
Graphite (FS or high temperature)
300 Series Stainless Steel
Stainless Steel
17-7PH
ASTM A351 CF8
Hard Drawn Stainless Steel
A193 Gr. B8A
A194 Gr. 8A
QTY
1
1
2
2
2
4
5
1
4
1
1
1
1
1
1
4
4
1
2
The quantities listed in the stem arrangement are for fugitive emission assemblies. Standard stem assemblies carry more seals and no lantern rings.
* these parts are used in repair kits. ** middle stem packing is only used from size 1-1/2" and above.
***Other materials available, call to discuss your special requirements.
•
T oll F ree (877) 774-2773
•
F ax (708) 562-9250
•
www.smithcooper.com
4
Parts & Materials
Series 70 - 2½" - 4"
Fugitive Emission Monitoring
with Lantern Ring Packing
High Temperature or
Fire Safe Packing
High Temperature
or Fire Safe
Chevron
11
10
9
12
12
13
13
11
10
9
Chevron
Packing
12
Sizes 2½" - 4"
ITEM DESCRIPTION
1
2
Body
End Piece
MATERIAL
316 Stainless Steel ASTM A351 CF8M
**
QTY
1
316 Stainless Steel ASTM A351 CF8M
316L Stainless Steel ASTM A351 CF3M
(used for stainless steel weld ends)
**
316 Stainless Steel
Alloy 20 **
1
MATERIAL
ITEM DESCRIPTION
Stem Packing - Bottom PTFE, TFM®, Nova
9*
10* Stem Packing - Middle PTFE, TFM®, Nova
11*
12*
13
14
15
16*
17
1
18
19
3
Ball
4*
Seat
PTFE, RTFE, TFM®, Nova, PEEK
2
5*
Body Seal
PTFE, Graphite
1
1
6
Stem
Stainless Steel
17-4PH
Alloy 20
**
7*
Thrust Bearing - Bottom Nova, PEEK
1
26
8*
Thrust Bearing - Top
1
27
Nova
20
21
22
23
24
25
Stem Packing - Top
Stem Packing
Lantern Ring
Gland Packing
Stop Plate
Belleville Washer
Lock Tab
Packing Nut
Lock Plate
Wrench Block
Handle Pipe
Wrench Bolt
Anti-Static Ball
Anti-Static Spring
Body Bolt
Body Nut
Stop Pin
QTY
2
2
PTFE, TFM®, Nova
2
Graphite (Fire safe or high temperature)
4
1
1
1
17-7PH
4
1
1
1
304 Stainless Steel ASTM A351 CF8 1
Stainless Steel
1
Zinc Plated Carbon Steel
Hard Drawn Stainless Steel
A193 Gr. B8A
A194 Gr. 8A
The quantities listed in the stem arrangement are for fugitive emission assemblies. Standard stem assemblies carry more seals and no lantern rings.
* these parts are used in repair kits.
**Other materials available, call to discuss your special requirements.
•
T oll F ree (877) 774-2773
•
F ax (708) 562-9250
•
1
2
2
6/8
6/8
1
www.smithcooper.com
5
Dimensions
�P (PCD)
K (Thread)
Series 70 - ½" - 2"
Optional
EMISSION PORT THREAD
1/8" NPT (Sizes 1/2" to 2")
�
�
�PORT
�
�P (PCD)
Series 70 - 2½" - 4"
K (Thread)
Optional
EMISSION PORT THREAD
1/4" NPT (Sizes 2 1/2" to 4")
�
�PORT
�
Dimensions (Inches)
SIZE
½"
¾"
1"
1½"
2"
2½"
3"
4"
Class Class Class Class
150 300 150 300
ØPORT A
C
D
E
F
A
B
B
0.56 4.25 5.50 1.96 2.36 1.42 2.15 6.42 3.54
Class Class
150 300
ØH ØH K (Thread) M ØP (PCD) Q ØR S
ØT
X
Y
3.50 3.75 M5-P0.8 0.264 F04 (1.65) 0.27 1.18 0.051 0.394 0.74 0.327
0.82
4.62
6.00
2.13
2.52 1.53 2.27 6.42 3.66 3.88 4.61 M5-P0.8 0.264 F04 (1.65) 0.37 1.18 0.051 0.394 0.74 0.327
1.00
5.00
6.50
2.13
2.72 1.93 2.74 7.28 3.73 4.25 4.88 M6-P1.0 0.343 F05 (1.97) 0.39 1.38 0.059 0.472 0.83 0.390
1.50
6.50
7.50
2.97
3.21 2.56 3.98 9.45 5.28 5.04 6.12 M8-P1.25 0.512 F07 (2.76) 0.47 2.17 0.059 0.709 1.41 0.579
2.00
7.00
8.50
3.25
3.37 2.94 4.35 9.45 5.87 6.00 6.50 M8-P1.25 0.512 F07 (2.76) 0.47 2.17 0.059 0.709 1.41 0.579
2.50
7.50
9.50
3.58
4.00 3.98 5.91 23.62 7.48 7.01 7.52 M10-P1.5 0.807 F10 (4.02) 0.77
-
-
1.024 1.93 0.689
3.00
8.00 11.12 3.83
4.20 4.25 6.18 23.62 7.64 7.52 8.27 M10-P1.5 0.807 F10 (4.02) 0.77
-
-
1.024 1.93 0.689
3.94
9.00 12.00 4.61
5.06 4.90 8.07 23.62 8.28 9.02 10.00 M10-P1.5 0.807 F10 (4.02) 0.77
-
-
1.024 1.93 0.689
The dimensions above are for informational purposes only. Please contact Sharpe Valves if you need dimensions for construction
•
T oll F ree (877) 774-2773
•
F ax (708) 562-9250
•
www.smithcooper.com
6
Valve Seats
Pressure - Temperature Rating
Sat
ura
ted
Stea
mC
urve
800
700
Class
30 0 W
CB
500
Class 30
K
PEE
VA
NO
ER
SUP
VA
NO
300
Class 15
Class 15
200
0 CF8M
®
TFM
E
RTF
400
E
P TF
Pressure (PSI)
600
0 WCB
0 CF8M
100
0
0
50
100
150
200
250
300
350
400
450
500
550
600
Temperature (°F)
Note:
The maximum pressure/temperature ratings of the valve assemblies are limited to lowest of the body or seat material fitted.
The valve body ratings are based on ASME B16.34 rating for materials.
The graphs are based on laboratory testing and our experience in field.
The seat ratings depend on the material, design, application and function.
N - Nova
This is a Teflon base filled with glass amorphous carbon
powder and graphite. It has a lower thermal contractionexpansion than PTFE, and is ideal for steam or thermal fluid
applications up to 550°F (288°C). Color - black.
•
T oll F ree (877) 774-2773
SUPER NOVA
RTFE
R - Reinforced Polytetrafluoroethylene (RTFE).
PTFE’s mechanical properties are enhanced by adding 15%
filler material to provide improved strength,
stability and wear resistance. Its temperature range is from
-320°F to 450°F (-196°C to 232°C). Color-off-white.
PEEK
TFM
M - TFM® PTFE
Dyneon® TFM PTFE is a second generation PTFE with
improved chemical and heat resistant properties and
stress recovery. Its temperature range is -100°F to 500°F
(-73°C to 260°C) Color - white.
B - Super Nova is a free-flowing compound based on TFM
containing electro-graphitized carbon. It features: increased
thermal dimensional stability and surface hardness, improved
deformation under load, reduced friction and wear, and good
chemical stability. It has a high limiting oxygen index (LOI), low
coefficient of friction, very good mechanical properties and
exceptional temperature resistance. It is used as a seat material
in chemical processing and automotive industries. It is ideal to
use with steam and thermal fluid applications up to 550°F (288°C)
and as low as -40°F (-40°C). Color - black.
P - PEEK (Unfilled) Polyetheretherketone
PEEK Polymer offers a unique combination of chemical,
mechanical and thermal properties. Excellent for water and
steam application at elevated temperatures up to 600°F (315°C).
Color - beige.
OTHER
PTFE
T - Virgin PTFE
Polytetrafluoroethylene is a Fluorocarbon-based polymer.
This seating material has excellent chemical resistance and
a low coefficient of friction. Its temperature range is -100°F
to 400°F (-73°C to 204°C). Color - white.
NOVA
Sharpe Seat Materials
Other seat materials
Other seat material are available according to the application,
such as very high temperature or cryogenic conditions.
•
F ax (708) 562-9250
•
www.smithcooper.com
7
How To Order Series 70
1"
FS70
Size
Series
Class
Size
Series
½"
¾"
1"
1½"
2"
2½"
3"
4"
70
Full Port
FS70 Fire Safe
CF70 Cavity Fill
Note: 4" offered
with Packing
Nut. If Full API
608 compliance
is required order
option AP4.
6
6
6
R
G
Body /
Ends
Ball
Stem
Seat
Body
Seal
1 -
Fire Safe valves must use
Graphite or Impregnated
Graphite Seals and Stem Packing.
Alloy 20
Carbon Steel
316 Stainless Steel
Ball
Cavity Filler Seats available in PTFE.
2
6
Alloy 20
316 Stainless Steel
B
M
N
P
R
T
Super Nova
TFM®
Nova
Virgin PEEK
RTFE 15%
Glass Filled
PTFE
150
300
2
6
7
1
1F
3
3F
Stem
Packing
Stem
Alloy 20
316 Stainless Steel
17-4 PH
M TFM®
N Nova
T PTFE
X
-
Service
Options
Class 150 Flanged RF
Class 150 Flanged FF
Class 300 Flanged RF
Class 300 Flanged FF
Service
Graphite
Impregnated
Graphite
X
U
MN
SF
OH
Options
Ends
Graphite
Impregnated
Graphite
M TFM®
T PTFE
G
I
-
Ends
G
I
Class
1
3
Stem
Packing
1 / 1
Body
Seal
Seat
Body/Ends
2
4
6
G -
Oxygen Service**
Vacuum
Ammonia Service
Silicone Free **
OH
F1
F2
L
Oval Handle*
1 Emission Port
2 Emission Port
Lockable Stem
Extension**
VB
SJ
SJ3
Vented Ball
Steam Jacket
Steam Jacket
With 3 Outlets
TP
Tamper Proof
Locking Device
DMH Spring Return
Handle***
HC
AP4
** Per Sharpe Standard
High Cycle Stem
API 608 Gland
(4" Only)
* Up to 1 1/2"
** 3¼" up to 1" valves
4" on larger valves *** Call Sharpe Valves for sizing / application of DMH (up to 1")
Other materials / options available please
contact us with your unique requirement.
Example: 1" FS701-666-RGG-1/1-X-OH
Size 1", Fire Safe, Series 70, Class 150 - 316 Stainless Steel Body and Ends, Stainless Steel Ball, Stainless Steel Stem,- RTFE Seats, Graphite Body Seals, Graphite Stem
Seals, - Class 150 Flanged Raised Face Ends,- Oxygen Steam Service - Oval Handle
Technical Information
VALVE
SIZE
Cv
½"
¾"
1"
1½"
2"
2½"
3"
4"
26
50
94
260
480
730
1300
2300
Applicable Standards
Wall Thickness
Face to Face Dimensions
Fugitive Emission
Flange Dimensions
Basic Design
Fire Safe
Pressure Test
Mounting Dimensions
NACE (Only with 316 SS Stem)
Marking
APPROX. WEIGHT lbs
Class 150
Class 300
4
5
7
15
23
39
45
65
5
8
10
20
28
47
62
94
ASME B16.34
ASME B16.10
ISO 15848-1 (with I or N stem packing)
ASME B16.5
ASME B16.34, API 608 5th Edt.
API 607 6th Edt. (FS70 only)
API 598, MSS-SP 72
ISO 5211
MR-0175 / ISO 15156
MSS-SP 25
TFM® is a registered trademark of Dyneon, LLC. PEEK® is a
registered trademark of VICTREX.
Due to continuous development of our product range we reserve the right to change the dimensions and information contained in the leaflet as required.
Toll Free 877-774-2773
Fax 708-562-9250
www.smithcooper.com • www.sharpevalves.com
Los Angeles, CA
Issue: 10/2014
·
Chicago, IL
·
Atlanta, GA
·
Vancouver, WA
·
Houston, TX
8

series 70 - Sharpe® Valves

Transcription

Similar documents

kik-step®

Guardian GLHL-SS GLHR-SS

Skate Deterrents

Product sheet BBPE050.4A

Printable PDF – KE300TH

Data Sheet For DLM Series Lokma Sweet Machine

Fiche semeca chaudronnerie Vang 1.1

Hamilton Beach 936 3 Speed Milk Shake / Malt Mixer

Leaflet - Light International

parkerizing - Home Metal Shop Club