Industrial Luminaires

Transcription

Industrial Luminaires
1/2002
Contents
HIGH BAY LUMINAIRES
Page
Horizontal
6xx3
9-12
Crane
6xx7.440
13-14
Floodlight
6xx7
15-16
Special luminaires
17-18
Regular
6xx2
19-22
Standard
6xx5
23-26
Basic
6xx6
27-28
LOW BAY LUMINAIRES
Profile
400-250 W
9xx1
29-30
Profile
250 W
6xx1
31-32
Profile
150-80 W
6xx1
33-34
Profile
100-70 W
6xx1
35-36
Hood luminaire +
Ballast box
6126 + 6059
37-39
Profile
54 W / 80 W
for T5 Fluorescent
9xx1
41
Fluorescent
T5
Fluor. with Battery
9xx1
9xx1.800
41
44
Fluorescent
42-44
Fluor. with Battery
9xx0
6xx1
6xx1.800
Spotlight
6xx7
45-46
FLUORESCENT LUMINAIRES
Installation kits
T8
47-48
3
Contents
CONTENTS
6146
Basic 400W Q ............................................ 27
Alphabetically
6147
Floodlight 400W Q .................................... 15
6201
Profile 70W ST .......................................... 35
Basic ......................................................................................... 27
6207
Spot 70W ST ............................................. 45
Ballast Box for Hood Luminaire ............................................ 39
6211
Profile 100W ST/MT .................................. 35
Calculation of Economy ......................................................... 49
6221
Profile 150W ST/MT .................................. 33
Crane ........................................................................................ 13
6231
Profile 250W ST/MT .................................. 31
Filter ........................................................................................... 7
6232
Regular 250W ST/MT ................................ 19
Floodlight ................................................................................. 15
6233
Horizontal 250W ST/MT ............................. 9
Floodlight for Sand Blasting .................................................. 17
6233.001
Horizontal 250W S/M for Sand Blasting . 17
Fluorescent 2x36W, 2x58W .............................................. 42, 43
6234
Horizontal with Instant Ignition 250W SD 17
Fluorescent with Battery ........................................................ 44
6235
Standard 250W ST/MT ............................. 23
Fluorescent 2x54W, 2x80W .................................................... 41
6236
Basic 250W ST/MT .................................... 27
Hood ......................................................................................... 37
6237
Floodlight 250W ST/MT ............................ 15
Horizontal .................................................................................. 9
6237.401
Floodlight 250W S/M for Sand Blasting .. 17
Horizontal for Sand Blasting .................................................. 17
6237.430
Crane 250W SD with Instant Ignition ...... 13
Horizontal with Instant Ignition ............................................. 17
6237.440
Crane 250W SD ......................................... 13
Installation Kits ........................................................................ 47
6242
Regular 400 W ST/MT ............................... 19
Profile 400W, 250W ................................................................. 29
6243
Horizontal 400 W ST/MT ............................ 9
Profile 250W ............................................................................ 31
6243.001
Horizontal 400W S/M for Sand Blasting . 17
Profile 150-80W ....................................................................... 33
6244
Horizontal with Instant Ignition 400W SD 17
Profile 100-70W ....................................................................... 35
6245
Standard 400W ST/MT ............................. 23
Regular ..................................................................................... 19
6246
Basic 400W ST/MT .................................... 27
Spot .......................................................................................... 45
6247
Floodlight 400W ST ...................................15
Standard .................................................................................. 23
6247.401
Floodlight 400W S/M for Sand Blasting .. 17
Track mounting system .......................................................... 48
6247.430
Crane 400W SD with Instant Ignition ...... 13
6247.440
Crane 400W SD ......................................... 13
Function of Luminaire .............................................................. 6
6263
Horizontal 1000W ST/MT ........................... 9
CONTENTS
6267
Floodlight 1000W ST/MT .......................... 15
Acc. to Type Nr.
6311
Profile 100W MT ....................................... 33
6317
Spot 100W MT .......................................... 45
6020
Suspension Chains ..................................... 47
6321
Profile 150W MT ....................................... 33
6040
Wall Bracket ................................................ 48
6334
Horiz. with Instant Ignition 250W MD ..... 17
6059
Ballast Box 9x125W .................................... 37
6337.440
Crane 250W MD ........................................ 13
Wall Bracket, 45° ......................................... 48
6347.440
Crane 400W MD ........................................ 13
6060
4
6061
Wall Bracket, 0°/25°/45° .............................. 48
6431
Fluorescent 2x36W ................................... 43
6063
Pole Bracket, 0°/25°/45° .............................. 48
6431.800
Fluorescent 2x36W with Battery .............. 44
6076
Ceiling Bracket, 15°/30°/45° ........................ 47
6441
Fluorescent 2x58W ................................... 43
6078
Suspension rod ........................................... 47
6441.800
Fluorescent 2x58W with Battery .............. 44
6079
Fixing device for wire ................................. 47
9131
Profile 250W Q .......................................... 29
6091
Beam and Wall bracket, 25° ....................... 47
9231
Profile 250W ST/MT .................................. 29
6111
Profile 80W Q .............................................. 33
9241
Profile 400W ST/MT .................................. 29
6117
Spot 80W Q ................................................. 45
9430
Fluorescent 2x36W ................................... 42
6121
Profile 125W Q ............................................ 33
9440
Fluorescent 2x58W ................................... 42
6126
Hood 125W Q .............................................. 37
9441
Fluorescent 2x54W ................................... 41
6132
Regular 250W Q .......................................... 19
9441.800
Fluorescent with Battery 2x54W .............. 44
6133
Horizontal 250W Q ........................................ 9
9451
Fluorescent 2x80W ................................... 41
6135
Standard 250W Q ....................................... 23
6136
Basic 250W Q .............................................. 27
6137
Floodlight 250W Q ...................................... 15
6142
Regular 400W Q .......................................... 19
6143
Horizontal 400W Q ........................................ 9
6145
Standard 400W Q ....................................... 23
INDUSTRIAL LUMINAIRES
When economy and quality come first
I-Valo was founded in 1971, and
it has been expanding ever since.
I-Valo is an innovative company
in the electrical branch, and in
2000 it became a limited company
in the Lexel Group. Our first
luminaires were engineered in
cooperation with major industrial
companies. The aim was to
develop luminaires that endure
the most severe industrial
conditions.
The result was the i-VALO
Horizontal, a luminaire that has
been successfully used in various
branches of industry.
Long experience and continuous
product development enable
I-Valo to offer today a wide range
of industrial luminaires and
solutions to the customers.
Besides luminaires, I-Valo also
makes customer-specific lighting
and cost calculations.
I-Valo Ltd.
Valaisintehdas
FIN-14500 Iittala
FINLAND
Tel: + 358 10 - 44 66 600
Fax: + 358 10 - 44 66 500
www.i-valo.com
I-Valo QUALITY GUARANTEED BY
ISO 9001 and ISO 14001
Certificates.
Production
Enviroment
5
INDUSTRIAL LIGHTING
The original luminaire with filter and dust rim
3. INSTALLATION AND
MAINTENANCE
1. DUST PROTECTION
1.2 Dust rim
1.1 Filtering technique
All i-VALO High-bay luminaires
are equipped with a dust rim that
creates an "air cushion" and
prevents dust from gathering on
the outer surface of the glass.
The i-VALO industrial luminaires
have an enclosed construction
equipped with a unique, patented
filtering system. When switched
on or off, and during power
failures, pressure balancing of
i-VALO luminaires is arranged
through a filter, not through the
packing as in conventional
enclosed luminaires.
All components inside the
luminaire, e.g. the reflector, the
light source, and the front glass,
are completely protected against
dust and corrosive gases.
2. CORROSION RESISTANCE
All luminaires are supplied
complete with a fixing bracket to
facilitate mounting. The need for
maintenance is reduced to a
minimum. We also offer a wide
range of installation kits that make
maintenance and lamp changes
easy.
The external metal parts of the
luminaire are of aluminium, on
most types coated with Epoxy
powder to prevent corrosion in
conditions harmful to bare
aluminium.
4. FUNCTION OF THE LUMINAIRE
SWITCHED ON
SWITCHED OFF
Dust rim
Dust rim
Filter
When switched on, the lamp warms up the air inside the
luminaire, and the warm air flows out through the filter drying
and cleaning it at the same time.
In both cases the air cushion directs air past the front glass
and prevents dust from gathering on the glass.
6
Filter
When switched off, air flows back into the luminaire through
the filter that removes impurities and gases from the air.
Filtering system
1. PRESSURE BALANCING
FILTER
i-VALO Standard luminaires are
equipped with a pressure
balancing filter that removes dust
and impurities larger than 10µm.
The pressure balancing filter
reduces contamination and
blackening.
2. DUST FILTER
3. DOUBLE-EFFECT FILTER
i-VALO Low Bay and Regular
luminaires are equipped with dust
filters that remove dust and
impurities larger than 0,01µm.
The table below shows the
capacity of the dust filter.
i-VALO Horizontal luminaires are
equipped with a double-effect
filter incorporating dust and
charcoal elements. The doubleeffect filter also removes corrosive
gases.
Dust filter
Double-effect filter
Pressure balancing filter
Filtering ability of the dust filter
Pass through the filter
0,001 µm
Removed by the filter
0,01 µm
0,1 µm
1,0 µm
10 µm
100 µm
1000 µm
Aerosols
Normal impurities of open air
Pigments
Limestone dust
Resin smoke
Sulphuric acid vapour
Alcali lye vapour
Cement dust
NH4 Cl-vapour
Soot black
Flying ashes
Foundry dust
Oil smoke
Metallurgial dust
Metallurgial vapour
Smoke from steel furnace
Vapour and dust of cupola furnace
Tobacco smoke
Gas molecules
Viruses
Fog
Bacteria
Dense fog
Pollen
Rain
7
8
6133 6233 6263
6143 6243
Horizontal
250 W / 400 W / 1000 W
IP 64
Protection class I
Specification
• For heights:
5...30m
250/400W
15...30m
1000W
• Material: Aluminium and
tempered safety glass
• Voltage: 230V 50Hz
• Power factor: cos 0,9
• Lamp holder: E40
• Mains current, nom.
250W 1,4A
400W 2,2A
1000W 5,6A
• Start-up:
250W 2,3A
400W 3,6A
1000W 7,3A
ta 70/60/25°C
• Range of ambient temperature, ta
250W -30°C...+70°C
400W -30°C...+60°C
1000W -30°C...+25°C
Features
• Closed construction, air-pressure
tested
• Pressure balancing through
double filter
• With Epoxy powder coating
(RAL 7040)
F
F
F
Mains Entry
• Wiring box for -o- 5 x 2,5 mm2
• Option: 1,5 m cable and plug
Note:
Metal Halide luminaires are
equipped with High Pressure
Sodium ballast, please check
suitability of lamp.
9
6133 6233 6263
6143 6243
Type
Light Source
6133
6143
6233
6243
6263
QE-250W-E40
QE-400W-E40
S/M-250W-E40
S/M-400W-E40
ST/MT-1000W-E40
ILCOS
Weight
Light distribution
Q
Q
S
S/M
S
13,5 kg
14,0 kg
14,5 kg
16,0 kg
31,5 kg
V
V
V
V
V
Auxiliary lamp
facility
2
2
1, 2, 2.5, 3
1, 2, 2.5, 3
1, 2
Light Source
Q
= Mercury Vapour
S
= High Pressure Sodium
M
= Metal Halide
Safety lighting
6xx3.600
• With 250W Halogen lamp, E27
• With two wiring boxes for
-o- 5 x 2,5 mm2
Instant lighting
6xx3.800 with wiring box
6xx3.700 with cable and plug
• For instant lighting during
run-up period of main
discharge lamp
• With start-up switch
Light Distribution
V1
= narrow beam
V2
= medium
V2.5
= wide-medium
V3
= wide
250/400 W
1000 W
340
401
Ø 510
780
Ø 631
867
Light Distribution
Curves
C 0°
C 90°
C 45°
C 90°
C 0°
6133/V2
6137/V2
6143/V2
6147/V2
= 72%
6233/V2
6237/V2
= 74%
= 77%
90˚
90˚
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
40˚
40˚
40˚
40˚
200
60˚
200
300
50˚
400
70˚
200
60˚
50˚
400
500
40˚
40˚
400
600
600
700
30˚
30˚
30˚
30˚
30˚
30˚
800
600
1000
1100
20˚
20˚
10˚
QE-250 W
10
0˚
10˚
20˚
20˚
10˚
QE-400 W
0˚
10˚
20˚
20˚
10˚
ST-250 W
0˚
10˚
6133 6233 6263
6143 6243
6233/V2,5
6237/V2,5
6233/V1
= 80%
6243/V1
= 64%
= 64%
90˚
90˚
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
70˚
200
60˚
300
50˚
400
500
500
70˚
1000
50˚
2000
1000
40˚
40˚
40˚
30˚
30˚
60˚
40˚
40˚
30˚
30˚
40˚
600
700
30˚
800
1500
3000
30˚
900
4000
2000
20˚
20˚
10˚
0˚
20˚
10˚
20˚
10˚
ST-250 W
0˚
20˚
10˚
ST-250 W
0˚
10˚
ST-400 W
6243/V2,5
6247/V2,5
= 80%
6243/V2
20˚
10˚
6243/V3
6247/V3
= 85%
= 83%
90˚
90˚
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
40˚
40˚
40˚
40˚
70˚
200
60˚
300
50˚
400
200
300
400
500
50˚
500
40˚
600
40˚
600
700
30˚
60˚
200
400
700
30˚
800
30˚
800
900
30˚
30˚
30˚
20˚
20˚
20˚
900
1000
1100
20˚
20˚
10˚
0˚
20˚
10˚
10˚
ST-400 W
0˚
10˚
10˚
ST-400 W
6263/V1
6267/V1
6263/V2
6267/V2
= 82%
90˚
90˚
90˚
80˚
80˚
70˚
60˚
10˚
6233/V2
6237/V2
= 80%
90˚
90˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
400
50˚
0˚
ST-400 W
400
= 79%
90˚
80˚
200
70˚
400
60˚
600
50˚
50˚
800
1000
40˚
40˚
40˚
40˚
800
40˚
40˚
600
1200
1400
30˚
30˚
30˚
30˚
800
30˚
30˚
1600
1200
1800
1000
2000
2200
cd/klm
1600
20˚
10˚
ST/MT-1000 W
0˚
20˚
10˚
20˚
20˚
10˚
ST/MT-1000 W
0˚
10˚
20˚
20˚
10˚
0˚
10˚
MT-250 W
11
6133 6233 6263
6143 6243
6233/V3
6237/V3
6243/V1
6247/V1
= 79%
90˚
90˚
90˚
80˚
80˚
70˚
60˚
200
= 84%
6243/V2
= 77%
90˚
90˚
90˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
1000
60˚
400
50˚
50˚
50˚
50˚
50˚
40˚
40˚
50˚
2000
40˚
40˚
40˚
40˚
400
800
30˚
30˚
3000
30˚
30˚
30˚
30˚
1200
600
4000
20˚
20˚
10˚
0˚
20˚
20˚
10˚
10˚
MT/ST-250 W
0˚
10˚
10˚
MT-400 W
6233/V2,5
6243/V2,5
MT- 400 W
6243/V3
= 82%
= 84%
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
70˚
70˚
60˚
60˚
50˚
50˚
70˚
200
60˚
300
50˚
400
70˚
60˚
200
50˚
300
500
40˚
40˚
40˚
40˚
600
400
700
30˚
30˚
800
30˚
30˚
900
600
20˚
20˚
10˚
MT- 250/400 W
12
0˚
10˚
20˚
20˚
10˚
MT- 400 W
1600
20˚
0˚
10˚
0˚
20˚
10˚
6237.440 6337.440 6237.430
6247.440 6347.440 6247.430
Crane luminaire
250 W / 400 W
IP 64
Protection class I
Specification
• For heights: 5...30m
• Lampholder: FC 2 with or without
Instant Ignition
250W 1,4A
400W 2,2A
• Start-up:
250W 2,3A
400W 3,6A
ta 70/60/25°C
250W -30°C...+70°C
400W -30°C...+60°C
Instant Ignition
-30°C...+25°C
F
Mains Entry
• 1,5 m cable and plug
Features
• Closed construction,
air-pressure tested
double filter with shield
(RAL 7040)
• Bracket with shock absorbers
• Instant Ignition of warm
lamp with special starter
13
6237.440 6337.440 6237.430
6247.440 6347.440 6247.430
Crane luminaires without Instant Ignition
Note
• Crane luminaires are supplied
with double-ended lamps. This
reduces the risk that possible
vibration loosens the lamp from
the socket.
• If Metal Halide lamps are used,
instant ignition is not
recommended, because the
starter is sensitive to vibration.
• Install the luminaire
transversally to the drive
direction of the crane.
Type
Light Source
ILCOS
Weight
Light Distribution
6237.440
6247.440
6337.440
6347.440
SD-250W-FC2
SD-400W-FC2
MD-250W-FC2
MD-400W-FC2
SD
SD
MD
MD
20,0 kg
21,0 kg
20,0 kg
21,0 kg
V
V
V
V
Crane luminaires with Instant Ignition
Type
Light Source
ILCOS
Weight
Light Distribution
6237.430
6247.430
SD-250W-FC2
SD-400W-FC2
SD
SD
21,0 kg
23,0 kg
V 2
V 2
Light Source
SD
= High Pressure Sodium*)
MD
= Metal Halide*)
*) double-ended lamps
270
Ø 11
M10
560
Ø 11
350
200
21
Light Distribution
Curves
C 0°
C 90°
C 45°
148
C 90°
C 0°
Ø 510
Ø 510
765
6247.440
= 71%
90˚
90˚
80˚
80˚
70˚
70˚
100
60˚
60˚
50˚
50˚
200
40˚
40˚
300
30˚
30˚
400
20˚
20˚
10˚
SD-400 W
14
0˚
10˚
2
2
2
2
6137 6237 6267
6147 6247
Floodlight
250 W / 400 W / 1000 W
Specification
• For heights:
5...30m
250/400W
15...30m
1000W
250W 1,4A
400W 2,2A
1000W 5,6A
• Start-up:
250W 2,3A
400W 3,6A
1000W 7,3A
250W -30°C...+70°C
400W -30°C...+60°C
1000W -30°C...+25°C
Features
air-pressure tested
double filter with shield
(RAL 7040)
Mains Entry
• 1,5 m cable and plug
IP 64
Protection class I
ta 70/60/25°C
F
15
6137 6237 6267
6147 6247
Type
Light Source
ILCOS
6137.400
6147.400
6237.400
6247.400
6267.400
QE-250W-E40
Q
QE-400W-E40
Q
S/M-250W-E40
S
S/M-400W-E40
S
ST/MT-1000W-E40 S/M
Weight
Light Distribution
18,5 kg
19,0 kg
19,5 kg
21,0 kg
32,0 kg
V
V
V
V
V
2
2
1, 2, 2.5, 3
1, 2, 2.5, 3
1, 2
Light Source
Q
= Mercury Vapour
S
= High Pressure Natrium
M
= Metal Halide
Light Distribution (LD), see page 11
V1
= narrow beam
V2
= medium
V2.5
= wide-medium
V3
= wide
250/400 W
1000 W
342
661
300
350
497
16
Ø 14
200
250
300
Ø 14
200
970
870
Ø 510
388
Note:
Horizontal with Instant Ignition 250/400 W
The body is similiar to Horizontal. Voltage can be turned
off by means of a swich outside the luminaire. The
luminaire is supplied with a double-ended lamp.
With Metal Halide, please note that the starter is
sensitive to vibration.
Ø 11 x 20
500
340
150
Type
Light Source
6234
6244
6334
6344
SD- 250W-FC2
SD- 400W-FC2
MD- 250W-FC2
MD- 400W-FC2
LD = Light Distribution
ILCOS
Weight
LD
S
S
M
M
16,0 kg
17,0 kg
16,0 kg
17,0 kg
V
V
V
V
2
2
2
2
Ø 510
780
LD see 6247.440 p.14
V2 = medium
Horizontal for Sand Blasting Areas 250/400 W
The body is similiar to Horizontal . The luminaire is
supplied with a 10mm thick tempered safety glass. The
glass is protected by a wire mesh, and the dust rim is
deeper. The double filter opening is shielded with a
plate.
Ø 11 x 20
500
450
Type
Light Source
6233.001
6243.001
S/M- 250W-E40
S/M- 400W-E40
ILCOS
Weight
LD
S
S
16,0 kg
17,0 kg
V 2
V 2
Ø 435
750
V2 = medium
Floodlight for Sand Blasting Areas
250/400 W
450
The luminaires are similiar to Floodlight. They are
supplied with a 10 mm thick tempered safety glass. The
glass is protected by a wire mesh, and the dust rim is
deeper. The double filter opening is shielded with a
plate.
Type
Light Source
6237.401
6247.401
S/M- 250W-E40
S/M- 400W-E40
ILCOS
Weight
LD
S
S
16,0 kg
17,0 kg
V2
V2
V2 = medium
Ø 435
860
Ø 14 (4 Pcs)
200
250
17
18
6132 6232
6142 6242
Regular
250 W / 400 W
IP 64
Protection class I
Specification
250W 1,4A
400W 2,2A
• Start-up:
250W 2,3A
400W 3,6A
250W -30°C...+55°C
400W -30°C...+45°C
ta 55/45°C
Features
air-pressure tested
dust filter
• Fixed dust rim
• Ballast box and fixing bracket
with Epoxy powder coating
(RAL 7040). Reflector outer
surface of uncoated
aluminium. Inner surface of
vacuum metallized aluminium.
F
F
F
16
Mains Entry
• Wiring box for -o- 5 x 2,5 mm2
Note:
19
6132 6232
6142 6242
Type
Light Source
6132
6142
6232
6242
QE-250W-E40
QE-400W-E40
S/M-250W-E40
S/M-400W-E40
Light Source
QE
= Mercury Vapour
S
M
= Metal Halide
Auxiliary lamp
facility
756
523
Ø 600
20
ILCOS
Weight
Light distribution
Q
Q
S
S
13,5 kg
14,0 kg
14,5 kg
16,0 kg
V
V
V
V
2, 3
2
2, 3
1, 2, 3
Light distribution (LD)
V1
= narrow beam
V2
= medium
V3
= wide
Safety lighting
6xx2.600
• With two wiring boxes for
-o- 5 x 2,5 mm2
Instant lighting
6xx2.800 with wiring box
6xx2.700 with 1.5 m cable and
plug
discharge lamp
1040
6132 6232
6142 6242
Light Distribution
Curves
C 0°
C 90°
C 45°
C 90°
C 0°
6132/V2
6132/V3
= 78%
6142/V2
= 77%
= 76%
90˚
90˚
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
100
70˚
60˚
200
50˚
100
200
300
40˚
40˚
40˚
40˚
40˚
400
400
400
500
30˚
50˚
300
300
40˚
60˚
200
30˚
30˚
30˚
30˚
20˚
20˚
20˚
20˚
30˚
500
600
700
20˚
10˚
0˚
10˚
10˚
0˚
10˚
10˚
QE-250 W
QE-250 W
= 78%
6232/V2
20˚
0˚
10˚
QE-400 W
6242/V1
= 78%
6232/V3
= 81%
90˚
90˚
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
40˚
40˚
200
60˚
100
200
300
50˚
400
70˚
200
60˚
50˚
400
300
500
40˚
40˚
40˚
40˚
600
400
600
700
30˚
30˚
800
30˚
30˚
30˚
30˚
800
900
1000
1000
1100
20˚
20˚
10˚
ST-250 W
0˚
10˚
20˚
20˚
10˚
ST-250 W
0˚
10˚
20˚
20˚
10˚
0˚
10˚
ST-400 W
21
6132 6232
6142 6242
6242/V3
= 83%
6242/V2
6232/V2
= 84%
= 81%
90˚
90˚
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
40˚
40˚
40˚
40˚
200
60˚
300
50˚
400
200
60˚
300
50˚
400
500
500
40˚
40˚
400
600
600
700
700
30˚
70˚
200
30˚
800
30˚
30˚
30˚
600
900
30˚
800
900
1000
1100
20˚
20˚
10˚
0˚
10˚
10˚
6232/V3
= 78%
10˚
10˚
90˚
90˚
80˚
80˚
80˚
70˚
70˚
60˚
60˚
100
200
50˚
50˚
50˚
40˚
40˚
0˚
10˚
MT-250 W
6242/V1
90˚
60˚
0˚
20˚
20˚
ST-400 W
ST-400 W
70˚
20˚
20˚
6242/V2
= 74%
100
200
300
400
= 83,5%
90˚
90˚
80˚
80˚
100
80˚
70˚
70˚
200
70˚
60˚
60˚
50˚
50˚
40˚
40˚
30˚
30˚
90˚
60˚
400
50˚
300
500
40˚
400
700
500
30˚
40˚
600
600
30˚
30˚
800
800
600
900
cd/klm
1000
30˚
1000
1100
1200
cd/klm
20˚
20˚
10˚
0˚
10˚
10˚
MT-250 W
MT-400 W
6242/V3
= 77%
90˚
90˚
80˚
80˚
100
70˚
60˚
70˚
60˚
200
50˚
50˚
300
40˚
40˚
400
500
30˚
30˚
600
cd/klm
20˚
20˚
10˚
MT-400 W
22
1200
cd/klm
20˚
0˚
10˚
0˚
20˚
10˚
20˚
20˚
10˚
MT-400 W
0˚
10˚
6135 6235
6145 6245
Standard
250 W / 400 W
IP 64
Protection class I
Specification
250W 1,4A
400W 2,2A
• Start-up:
250W 2,3A
400W 3,6A
250W -30°C...+30°C
400W -30°C...+30°C
ta 30°C
Features
air-pressure tested
• Supplied with pressure
balancing filter
• Ballast box and fixing bracket
with Epoxy powder coating
(RAL 7040). Reflector outer
surface of uncoated aluminium.
Inner surface of vacuum
metallized aluminium.
F
Mains Entry
• Two rubber grommets for
-o- 5 x 2,5 mm2
• Option 1,5 m cable and plug
Note:
23
6135 6235
6145 6245
Type
Light Source
6135
6145
6235
6245
QE-250W-E40
QE-400W-E40
S/M-250W-E40
S/M-400W-E40
ILCOS
Weight
Light distribution
Q
Q
S
S
13,5 kg
14,0 kg
14,5 kg
16,0 kg
V
V
V
V
Light Source
QE
= Mercury Vapour
S
M
= Metal Halide
Light distribution (LD)
V2
= medium
V3
= wide
Auxiliary lamp
facility
Instant lighting
6xx5.800 with with two rubber
grommets
6xx5.700 with 1.5m cable and
plug
discharge lamp
500
Ø 11x20
417
Ø 507
718
24
2
2
2, 3
2, 3
950
6135 6235
6145 6245
Light Distribution
Curves
C 0°
C 90°
C 45°
C 90°
C 0°
6135/V2
6145/V2
6235/V2
6245/V2
= 72%
6235/V3
6245/V3
= 79%
= 75%
90˚
90˚
90˚
90˚
90˚
90˚
80˚
80˚
80˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
100
50˚
200
70˚
100
60˚
50˚
200
200
40˚
40˚
40˚
40˚
40˚
30˚
30˚
40˚
400
300
300
30˚
30˚
30˚
400
30˚
600
400
500
20˚
20˚
10˚
0˚
800
20˚
10˚
10˚
6235/V2
6245/V2
90˚
80˚
80˚
80˚
70˚
70˚
70˚
60˚
60˚
60˚
50˚
50˚
40˚
40˚
400
40˚
30˚
80˚
MT-250/400 W
70˚
60˚
50˚
200
40˚
30˚
30˚
400
500
1200
0˚
10˚
= 86%
100
1000
10˚
0˚
300
800
20˚
10˚
90˚
600
30˚
20˚
20˚
ST-250/400 W
6235/V3
6245/V3
= 87%
90˚
50˚
10˚
ST-250/400 W
QE-250/400 W
90˚
20˚
0˚
20˚
10˚
600
20˚
10˚
0˚
20˚
10˚
MT-250/400 W
25
6135 6235
6145 6245
26
6136 6236
6146 6246
Basic
250 W / 400 W
IP 23
Protection class I
Specification
• For heights: 5...30 m
• Material: Aluminium
250W 1,4A
400W 2,2A
• Start-up:
250W 2,3A
400W 3,6A
250W -30°C...+35°C
400W -30°C...+35°C
ta 35°C
Features
• Open construction
• Reflector outer surface of
uncoated aluminium.
Inner surface of vacuum
metallized aluminium.
F
Mains Entry
• Two rubber grommets for
-o- 5 x 2,5 mm2
Note:
27
6136 6236
6146 6246
Type
Light Source
6136
6146
6236
6246
QE-250W-E40
QE-400W-E40
S/M-250W-E40
S/M-400W-E40
ILCOS
Weight
Light distribution
Q
Q
S
S
13,5 kg
14,0 kg
14,5 kg
16,0 kg
V
V
V
V
Light Source
QE
= Mercury Vapour
S
M
= Metal Halide
2
2
2, 3
2, 3
Ø 11x20
250
417
Light distribution
V2
= medium
V3
= wide
Auxiliary lamp
facility
Instant lighting
6xx6.800 with two rubber
grommets
6xx6.700 with 1.5m cable and
plug
discharge lamp
Ø 507
679
Light Distribution
Curves
6136/V2
6146/V2
90˚
90˚
80˚
80˚
80˚
70˚
70˚
70˚
C 0°
C 90°
C 45°
6236/V2
6246/V2
= 77%
90˚
100
60˚
60˚
60˚
50˚
50˚
50˚
200
= 84%
90˚
80˚
70˚
200
60˚
50˚
C 90°
400
40˚
C 0°
40˚
40˚
30˚
30˚
40˚
300
600
30˚
400
30˚
800
500
20˚
20˚
10˚
0˚
10˚
10˚
90˚
80˚
80˚
80˚
70˚
70˚
70˚
70˚
60˚
60˚
60˚
60˚
50˚
50˚
50˚
50˚
80˚
80˚
70˚
200
= 93%
80˚
90˚
100
6236/V3
6246/V3
= 92%
90˚
90˚
60˚
10˚
90˚
90˚
50˚
6236/V2
6246/V2
= 83%
0˚
20˚
ST-250/400 W
QE-250/400 W
6236/V3
6246/V3
1000
20˚
400
70˚
60˚
200
50˚
300
40˚
40˚
40˚
40˚
300
30˚
40˚
40˚
600
30˚
400
30˚
400
30˚
800
30˚
30˚
600
1000
500
20˚
20˚
10˚
ST-250/400 W
28
0˚
10˚
1200
20˚
10˚
MT-250/400 W
0˚
20˚
10˚
20˚
20˚
10˚
MT-250/400 W
0˚
10˚
9131 9231
9241
Profile
250 W / 400 W
IP 64
Protection class I
Specification
QE 250W
1,3A
ST/MT 250W
1,4A
ST/MT 400W
2,2A
• Start-up:
QE 250W
2,2A
ST/MT 250W
2,3A
ST/MT 400W
3,6A
9131
-30°C...+40°C
9231
-30°C...+40°C
9241
-30°C...+35°C
ta 40/35°C
Features
air-pressure tested
dust filter
(RAL 7040)
Note:
16
F
Mains Entry
• With 2 Pg16 cable entries at
one end for -o- 5 x 2,5 mm2
Auxiliary lamp
facility
Safety lighting
9xx1.600
• With 4 Pg16 cable entries at one
end for -o- 5 x 2,5 mm2
Instant lighting
9xx1.800 with 2 Pg16 cable entries
at one end for -o- 5 x 2,5 mm2
9xx1.700 with 1,5m cable and
plug
discharge lamp
• With 100W Halogen lamp, E 27
29
9131 9231
9241
Type
Light Source
ILCOS
9131
9231
9241
QE 250W – E40
Q
ST/MT 250W – E40 S
ST/MT 400W – E40 S
Weight
Light distribution
10,0 kg
11,0 kg
12,5 kg
V 3
V 3
V 3
Licht Source
Q
= Mercury Vapour
S
M
= Metal Halide
Light distribution
V2
= medium
V3
= wide
Light Distribution
Curves
774
260
750
200
C 0°
C 90°
C 45°
C 90°
C 0°
9131
90°
50
80°
9241/ 9231
= 71%
90°
90°
80°
80°
90°
50
80°
70°
100
70°
70°
100
70°
60°
150
60°
60°
150
60°
50°
50°
200
200
50°
50°
250
250
cd/klm
40°
30°
QE-250 W
30
= 82%
20°
10°
0°
40°
10°
20°
30°
cd/klm
40°
30°
20°
ST/MT-250/400 W
10°
0°
40°
10°
20°
30°
6231
Profile
250 W
IP 64
Protection class I
Specification
• Mains current, nom. 1,4A
• Start-up:
2,3A
-30°C...+35°C
Note:
ta 35°C
F
Features
Light Source
6231
ST/MT 250W – E40
Light Source
S
M
= Metal Halide
F
Mains Entry
air-pressure tested
dust filter
(RAL 7040)
Type
F
ILCOS
Weight
Light distribution
S
10,0 kg
V 2, 3
Light distribution
V2
= medium
V3
= wide
31
6231
Auxiliary lamp
facility
Safety lighting
6xx1.600
Instant lighting
plug
discharge lamp
1024
260
1000
171
Light Distribution
Curves
6231/V3
= 76,6%
90°
90°
50
80°
80°
100
70°
70°
C 0°
150
C 90°
C 45°
60°
60°
C 90°
200
C 0°
50°
50°
250
300
cd/klm
40°
30°
20°
10°
0°
40°
10°
20°
30°
ST-250 W
6231/V2
= 79,3%
90°
90°
80°
80°
50
70°
100
= 74%
90°
90°
60°
60°
150
50°
6231/V3
70°
50°
200
50
80°
80°
70°
100
70°
60°
150
60°
250
40°
40°
200
50°
50°
300
cd/klm
250
350
cd/klm
40°
30°
20°
MT/ST-250 W
32
10°
0°
10°
20°
30°
30°
MT-250 W
20°
10°
0°
40°
10°
20°
30°
6111 6221 6321
6121 6311
Profile
80 W / 100 W / 125 W / 150 W
IP 64
Protection class I
Specification
• Lamp holder:
QE 80W/125W E27
ST 150W
E40
ME 100/150W E27
Q 80W
0,45A
Q 125W
0,7A
MT/ST 150W
0,85A
MT/ST 100W
0,6A
F
ta 35/40°C
• Start-up:
Q 80W
0,65A
Q 125W
1,1A
MT/ST 150W
1,2A
MT/ST 100W
1,0A
6111/
6121/
6311: -30°C...+40°C
6221/
6321: -30°C...+35°C
Features
air-pressure tested
dust filter
(RAL 7040)
Mains Entry
Type
Light Source
6111
6121
6221
6311
6321
QE 80W – E27
QE 125W – E27
ST/MT 150W – E40
ME/MC 100W – E27
ME/MC 150W – E27
ILCOS
Q
Q
S
M
M
Weight
Light distribution
6,0 kg
6,5 kg
8,0 kg
7,5 kg
8,0 kg
V
V
V
V
V
3
3
2, 3
3
3
33
6111 6221 6321
6121 6311
Auxiliary lamp
facility
Safety lighting
6xx1.600
Instant lighting
plug
discharge lamp
774
750
260
171
C 0°
Light Distribution
Curves
C 90°
C 45°
C 90°
C 0°
6111, 6121
6221/V3
= 64%
90°
90°
50
80°
80°
100
70°
70°
= 76,6%
90°
90°
50
80°
80°
100
70°
70°
150
150
60°
60°
60°
60°
200
200
50°
50°
50°
40°
40°
50°
250
250
300
cd/klm
40°
30°
20°
10°
0°
10°
20°
cd/klm
30°
30°
QE-80/125 W
20°
10°
0°
40°
10°
20°
30°
ST/MT-150 W
6221/V2
6311, 6321/V3
= 79,3%
= 74%
90°
90°
90°
90°
50
80°
80°
70°
70°
100
70°
60°
150
60°
70°
100
60°
80°
80°
50
60°
150
200
50°
50°
50°
50°
200
250
250
40°
40°
300
350
34
20°
ST/MT-150 W
10°
0°
30°
20°
MC-100/150 W
cd/klm
30°
cd/klm
40°
10°
20°
30°
10°
0°
40°
10°
20°
30°
6201
6211
Profile
70 W / 100 W
IP 64
Protection class I
Specification
polycarbonate cover
• Lamp holder:
ST 70W
E27
ST 100W
E40
ST 70W
0,45A
ST 100W
0,6A
• Start-up:
ST 70W
0,6A
ST 100W
1,0A
-30°C...+40°C
F
ta 40°C
Features
Mains Entry
air-pressure tested
dust filter
(RAL 7040)
Type
Light Source
6201
6211
ST 70W – E27
ST 100W – E40
• Option: 1,5m cable and plug
ILCOS
S
S
Weight
Light distribution
6,0 kg
6,0 kg
V 2, 3, 5
V 2, 3, 5
Light Source
S
Light distribution
V2
= medium
V3
= wide
V5
= asymmetric
35
6201
6211
Auxiliary lamp
facility
Safety lighting
6xx1.600
Instant lighting
plug
discharge lamp
774
750
260
155
Light Distribution
Curves
6201, 6211/V3
= 75,5%
90°
90°
50
80°
C 0°
70°
80°
70°
100
C 90°
C 45°
C 90°
60°
60°
150
C 0°
200
50°
50°
cd/klm
250
40°
40°
30°
6201, 6211/V2
20°
10°
0°
10°
20°
30°
= 79,3%
ST-70/100 W
90°
90°
6201, 6211/V5
80°
80°
50
70°
= 69%
70°
100
90°
50
60°
60°
150
50°
80°
90°
80°
70°
60°
50°
40°
100
30°
150
20°
50°
200
70°
250
200
40°
40°
250
300
60°
cd/klm
10°
300
350
30°
20°
ST-70/100 W
36
10°
0°
cd/klm
10°
20°
30°
50°
ST-70/100 W
40°
30°
20°
10°
0°
6126
Hood luminaire
125 W
IP 65
Protection class I
Specification
• Reflector: anodised aluminium
• Packings: heat resistant silicone
-30°C...+100°C
• Light source: QE = Mercury
Vapour
F
ta 100°C
Features
Application
air-pressure tested
(RAL 7040)
• Two Pg16 cable entries at one
• Ballast installed separately
• Hood of paper machine
• Areas with high temperature
and humidity
Ballast box 6059
• Can be used for 9 hood
luminaires, more information
on page 39.
Type
Light Source
ILCOS
Weight
Light distribution
6126
QE 125W – E27
Q
3,5 kg
V 3 = wide
37
6126
472
260
448
130
Installation kits
Ceiling and wall bracket 6066 for
mounting luminaires at an angle.
Light Distribution
Curve
C 0°
C 90°
C 45°
C 90°
C 0°
6126/V3
= 64%
90°
90°
80°
50
80°
70°
100
70°
60°
150
60°
200
50°
50°
250
cd/klm
40°
30°
QE-125 W
38
20°
10°
0°
40°
10°
20°
30°
6059
Ballast box for 9 hood luminaires
9 x 125 W
IP 65
Protection class I
Specification
With RCC-breaker
ta 25°C
Features
130
(RAL 7040)
• Material: Aluminium
• Wiring box: -o- 5 x 2,5 mm2
(or -o- 5 x 1,5 mm2 for 3
luminaires)
• Weight: 25,5 kg
260
Wiring diagram
Ballast
5 x 1,5 S
1
400V / 230V 50 Hz
1
2
3
N
L1
L2
L3
N
30 yF x 3
L1
L2
L3
1723
Connection of Luminaires
with silicone cables 5 x 1,5 S
Recidual Current Circuit Breaker 30 mA
L1
L2
L3
N
PE
1747
Supplied with recidual current
circuit breaker
PE
PE
PE
N
N
N
1
2
3
4
5
6
7
8
9
L1
L2
L3
N
2
L1
L2
L3
N
3
L1
L2
L3
N
5 x 1,5 S
4
1
2
3
N
L1
L2
L3
N
5
L1
L2
L3
N
6
L1
L2
L3
N
5 x 1,5 S
7
1
2
3
N
L1
L2
L3
N
8
L1
L2
L3
N
9
L1
L2
L3
N
39
40
9441
9451
Profile Luminaire for T5 Fluorescent Lamps
2x54W / 2x80W
IP 64
Protection class I
Specification
ta 45°C
Mains Entry
Features
• Voltage: 230V 50...60Hz/DC
• Lamp holder: G5
• Mains current:
2 x 54W approx. 0,6A
2 x 80W approx. 0,8A
• Range of ambient temperature,ta
-15°C...+45°C
• Light sources:
Osram FQ 54W (T5) Ø 16
Osram FQ 80W (T5) Ø 16
F
16
air-pressure tested
dust filter
(RAL 7040)
• 2 x 80W fitting with two
electronic ballasts, 2 x 54W
fitting with one electronic
ballast, not dimmable
Light Distribution
Curve
= 80%
(25°)
9441/9451
90˚
90˚
80˚
80˚
50
70˚
70˚
100
60˚
60˚
150
50˚
Type
Light Source
ILCOS
Weight
Light distribution
9441
9451
FD-2 x 54W-G5
FD-2 x 80W-G5
FD
FD
12 kg
14 kg
V3 = wide
V3 = wide
50˚
200
250
40˚
40˚
300
30˚
20˚
10˚
0˚
10˚
20˚
30˚
FD - 80W - G5 x 2
C
Type
A
B
C
9441
9451
170
170
1350
1750
1374
1774
B
260
A
41
9430
9440
Luminaire for T8 Fluorescent Lamps
2x36W / 2x58W
IP 64
Protection class I
ta 40°C
Features
Specification
• Material: Zinc plated steel,
polycarbonate cover
• Lamp holder: G13
• Mains current: 2 x 36W 0,5A
2 x 58W 0,7A
• Range of ambient temperature,ta
-15°C...+40°C
• Light sources: T8 Ø 26
F
16
Mains Entry
• Body of zinc plated steel
• Supplied with pressure
balancing filter
(RAL 7040)
• Equipped with low-loss electromagnetic ballasts
• On request with electronic
ballast, not dimmable, ta 30°C
• On request with through wiring
facility 5 x 2,5 mm2
Light Distribution
Curve
9430, 9440
= 62%
90˚
90˚
80˚
80˚
40
70˚
70˚
60˚
60˚
80
50˚
Type
Light Source
ILCOS
Weight
Light distribution
50˚
120
40˚
40˚
160
9430
9440
FD-2 x 36W-G13
FD-2 x 58W-G13
FD
FD
7,5 kg
8,0 kg
V 3 = wide
V 3 = wide
30˚
20˚
10˚
0˚
10˚
20˚
30˚
FD - 58W - G13 x 2
C
42
Type
A
B
C
9430
9440
98
98
1350
1650
1373
1673
B
A
174
6431
6441
Luminaire for T8 Fluorescent Lamps
2x36W / 2x58W
IP 64
Protection class I
Specification
ta 50°C
F
Features
• Material: Aluminium body with
polycarbonate cover
2 x 58W 0,7A
-15°C...+50°C
• Light sources: T8 Ø 26
Light Distribution
Curves
• Body of extruded aluminium
profile
dust filter
(RAL 7040)
6441
= 60%
90˚
90˚
80˚
80˚
70˚
70˚
100
60˚
60˚
50˚
50˚
200
40˚
40˚
Mains Entry
30˚
ballast, not dimmable, ta 35°C
20˚
10˚
0˚
10˚
20˚
30˚
FD - 58 W x 2
6431
= 64%
90˚
90˚
80˚
80˚
70˚
70˚
100
60˚
60˚
50˚
50˚
Liit
Type
Light Source
ILCOS
Weight
Light distribution
40˚
6431
6441
FD-2 x 36W-G13
FD-2 x 58W-G13
FD
FD
11,0 kg
11,0 kg
V 3 = wide
V 3 = wide
30˚
40˚
20˚
10˚
0˚
10˚
20˚
30˚
FD - 36 W x 2
Type
A
B
C
6431
6441
130
130
1500
1750
1524
1774
C
B
260
A
43
6431.800 9441.800
6441.800
Luminaire with Battery for Emergency Lighting
2x36W / 2x58W
IP 64
Protection class I
Specification
C
B
44
Emergency Lighting
Features
• Material: Aluminium body with
polycarbonate cover
2 x 58W 0,8A
-0°C...+25°C
A
F
ta 25°C
air-pressure tested
dust filter
(RAL 7040)
• Supplied with built-in battery,
charger and control unit
ballast
• In case of power failure, control
unit switches on battery
• Operating time: 1 hour
• Lamp marked for this purpose
serves as emergency lighting
• Battery not connected until
upon installation
Type
Light Source
ILCOS
Weight
Light distribution
6431.800
6441.800
9441.800
FD-2 x 36W-G13
FD-2 x 58W-G13
FD-2 x 54W-G5
FD
FD
FD
11,0 kg
13,0 kg
12,0 kg
V 3 = wide
V 3 = wide
V 3 = wide
Type
A
B
C
130
130
170
1500
1750
1350
1524
1774
1374
350
6431.800
6441.800
9441.800
6117 6317
6207
Spotlight
70 W / 80 W / 100 W
Specification
• Light sources: QE, S or ME
-30°C...+25°C
Features
• Enclosed construction
(RAL 7040)
• Light source easy to replace
• Beam easy to direct as desired
with joint allowing rotation and
adjustment in two directions
Mains Entry
Installation
• Mounting through lugs on
ballast box
Light Distribution
• Different photometrics will be
achieved by the use of clear or
coated lamps.
IP 65
Type
Light Source
ILCOS
6117
6207
6317
QE-80W-E27
S-70W-E27
M-100W-E27
Q
S
M
Weight
Light distribution
5,5 kg
6,0 kg
6,5 kg
V 1
V 1
V 1
Light Source
Q
= Mercury Vapour
S
M
= Metal Halide
Light Distribution
V1
= narrow beam
Protection class I
ta 25°C
F
45
6117 6317
6207
Light Distribution
Curves
= 66%
6117/V1
90˚
-90˚
-75˚
200
75˚
-60˚
400
60˚
C 0°
C 90°
C 45°
600
C 90°
335
310
45˚
-45˚
C 0°
800
1000
1200
-30˚
30˚
1400
cd/1000lm
-15˚
0˚
10˚
QE-80 W
420
6207/V1
6207/V1
= 72%
-90˚
-75˚
90˚
-90˚
75˚
-75˚
60˚
-60˚
= 65%
90˚
75˚
200
10000
Ø
3
25
-60˚
400
20000
60˚
600
45˚
-45˚
45˚
-45˚
800
30000
1000
260
40000
1200
30˚
-30˚
30˚
-30˚
1400
cd/1000lm
cd/1000lm
-15˚
50000
0˚
10˚
-15˚
SC-70 W
6317/V1
= 69%
-90˚
-75˚
90˚
-90˚
75˚
-75˚
90˚
75˚
60˚
60˚
-60˚
20000
4000
45˚
-45˚
45˚
-45˚
30000
6000
40000
8000
30˚
-30˚
46
cd/1000lm
50000
0˚
= 67%
2000
-60˚
MC-100 W
10˚
6317/V1
10000
-15˚
0˚
SE-70 W
30˚
-30˚
cd/1000lm
10˚
-15˚
ME-100 W
10000
0˚
10˚
Installation Kits
6020 Suspension chains
• standard length 2 x 4 m
• other lengths on request
• hot galvanized steel Ø 2 mm
• hooks Ø 5 mm of acid proof steel
6078 Suspension rod
• standard length 1 meter
• other lengths on request
• hot galvanized steel 4x30 mm
45°
30°
15°
60
36+,6
0°
20
Ø 6,7
Wire
6079 Wire bracket
• 1 pair
• galvanized steel
6076 Ceiling/Wall bracket
• mounting angle 15° / 30° / 45°
555
555
300 250
Ø 11
300 250
Ø 11
6091 Wall bracket / Beam bracket
• horizontal installation
6091 Wall bracket / Beam bracket
• mounting angle 25°
47
Installation Kits
Ø 11
Ø 11
200 160
200 160
6061 Wall bracket
• galvanized steel, with Epoxy powder coating
6063 Pole bracket for Ø 60 mm
• galvanized steel, with Epoxy powder coating
Ø 11
300 200
300 260
Ø 11
Ø 11
6060 Wall bracket
• mounting angle 45° or horizontal mounting
• mounting with two brackets
• aluminium, with Epoxy powder coating
6040 Wall bracket
• mounting angle steplessly adjustable
• aluminium, chain of hot galvanized
steel Ø 2mm
Track mounting system
The track mounting system is designed to facilitate
servicing of high-bay luminaires in factories where
the use of scaffolding, lifting equipment, etc. is
difficult. Luminaires are mounted on tracks that
are installed on a running rail.
48
For servicing and lamp change, the luminaires
are easy to move to a servicing position and then
back to the original place.
In many branches of industry,
dust and dirt will slowly but
permanently deteriorate the
illuminating capacity of lighting.
Consequences:
• increased number of errors
• decreased working efficiency
• increased risk of accidents
Reasons:
• high ambient temperature
• steam and moisture
• dust and other impurities
• corrosive gases
To constantly service and clean,
or to add more luminaires in order
to maintain the required lighting
standard is not an economical
solution! Over the average
economical life of a luminaire,
service expenses are much less
than the energy cost that is almost
three quarters of the total
expenses.
TOTAL EXPENSES
Example of the division of lighting costs in process
industry over a period of 10 years
Investments 16%
Energy 73%
Light sources 6%
Capital 3%
Maintenance 2%
49
In order to reduce energy
consumption and cut operating
costs, many suggestions and
techniques have been introduced
and practised.
How much energy a lighting
system will save, can only be
evaluated in comparison to other
systems with the same lighting
capacity.
Annual costs
160000
140000
EUR
120000
100000
80000
60000
40000
20000
0
conventional
lighting
i-VALO
Energy costs
Cost of service and lamp changing
Lamps and spare parts
The graph above compares a
filtered i-VALO luminaire with a
conventional one. Due to their
constant cleanness, fewer i-VALO
luminaires are needed to produce
50
the same lighting capacity after
one maintenance-free year. This
means savings in energy, capital,
maintenance and running costs.
I-Valo Ltd. • FIN-14500 Iittala • FINLAND • Telefon +358 10 - 44 66 600 • Telefax +358 10 - 44 66 500 • www.i-valo.com

Industrial Luminaires

Transcription

Similar documents