WLAN NB report

Transcription

WLAN NB report

Report No. 054L098Intel
Test Report
For：Intel
Product Name
MEGA BOOK
Model No.
MS-1032,MS-1031,M640,M645,6400,6400A
Transmitter Module.
Intel / WM3B2200BG
Antenna Kit.
HIGH-TEK / Aux-S79-1800131-H39
Main-S79-1800141-H39
Applicant
MICRO-STAR INT’L CO.,LTD
Address
No 69, Li-De st.,Jung-He City,Taipei
Hsien,Taiwan,R.O.C.
Date of Receipt Apr. 13, 2005
Date of Test
Apr. 15, 2005
Report No.
054L098Intel
The test results relate only to the samples tested.
The test report shall not be reproduced except in full without the written approval of QuieTek Corporation.
Page: 1 of 57
Version:1.0
Test Re port Certification
Test Date : Apr. 15, 2005
Report No. : 054L098Intel
Product Name
: MEGA BOOK
Applicant
: MICRO-STAR INT’L CO.,LTD
Address
: No 69, Li-De st.,Jung-He City,Taipei Hsien,Taiwan,R.O.C.
Manufacturer
: MICRO-STAR INT’L CO.,LTD
Model No.
: MS-1032,MS-1031,M640,M645,6400,6400A
Transmitter Module.
: Intel / WM3B2200BG
Antenna Kit.
: HIGH-TEK / Aux-S79-1800131-H39
Main-S79-1800141-H39
Rated Voltage
Working Voltage
Trade Name
: AC 230V/50Hz
DC 3.3V
: MSI,AVERATEC
Measurement Standard : ETSI EN 300 328:V1.4.1 (2003-04) 4.3.1& 4.3.4
Test Result
: Complied
The test results relate only to the samples tested.
The test report is under the previsions of Directive 1999/5/EC, Article 3.2.
The test report shall not be reproduced except in full without the written approval of QuieTek Corporation.
Documented By
:
(
Tested By
Rita Huang
)
:
( G e d d y J e n g)
Approved By
:
(
Gene Chang )
0914
Page: 2 of 57
Version:1.0
TA B L E O F C O N T E N T S
Description
Page
1.
GENERAL INFORMATION.........................................................................................4
1.1.
EUT Description............................................................................................................................4
1.2.
CRTU-Software Parameter............................................................................................................4
1.3.
Test Channel ..................................................................................................................................5
1.4.
Tested System Details....................................................................................................................6
1.5.
Configuration of tested System .....................................................................................................6
1.6.
EUT Exercise Software .................................................................................................................6
1.7.
Test Facility ...................................................................................................................................7
2.
Effective radiated Power ................................................................................................8
2.1.
Test Equipment..............................................................................................................................8
2.2.
Test Setup ......................................................................................................................................8
2.3.
Test Condition ...............................................................................................................................8
2.4.
Limits ............................................................................................................................................8
2.5.
Test Procedure ...............................................................................................................................9
2.6.
Test Specification ..........................................................................................................................9
2.7.
Uncertainty ....................................................................................................................................9
2.8.
Test Result .....................................................................................................................................9
2.9.
Test Data of Effective Radiated Power........................................................................................10
3.
Antenna Assembly Summary.......................................................................................12
4.
Spurious Emission.........................................................................................................13
4.1.
Test Equipment............................................................................................................................13
4.2.
Test Setup ....................................................................................................................................14
4.3.
Test Condition .............................................................................................................................15
4.4.
Limits ..........................................................................................................................................15
4.5.
Test Procedure .............................................................................................................................15
4.6.
Test Specification ........................................................................................................................16
4.7.
Uncertainty ..................................................................................................................................16
4.8.
Test Result ...................................................................................................................................16
4.9.
Test Data of Spurious Emission ..................................................................................................17
5.
Measurement Uncertainty Values ...............................................................................45
6.
EMC Reduction Method During Compliance Testing...............................................46
Attachment 2 : EUT Detailed Photographs ........................................................................................48
Attachment 1:
EUT Test Photographs
Attachment 2:
EUT Detailed Photographs
Page: 3 of 57
Version:1.0
1.
GENERAL INFORMATION
1.1.
EUT Description
Product Name
MEGA BOOK
Trade Name
MSI,AVERATEC
Model No.
MS-1032,MS-1031,M640,M645,6400,6400A
Transmitter Module. Intel / WM3B2200BG
Module Serial No 06ADCF084ADC54906006
Frequency Range 2412-2472MHz
Channel Number
13 CH
802.11b：1Mbps 2Mbps 5.5Mbps 11Mbps
Data Speed
802.11g：6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Channel separation 5 MHz
Antenna Kit
HIGH-TEK / Aux-S79-1800131-H39
Main-S79-1800141-H39
Antenna Gain
1.73dBi Refer antenna specification
Antenna type
PIFA
Type of Modulation DSSS/OFDM
Channel Control
Auto
Power Adapter
1.2.
MFR: LITEON
M/N: PA-1750-01
Input: AC 110V-240V 50-60Hz, 2.3A
Output: DC 19V, 3.95A
Cable out: Non-Shielded 1.8m, with one ferrite core bonded
Power Cord: Non-Shielded, 1.8m
CRTU-Software Parameter
Parameter CRTU II
WM3B2200BG
Gain 802.11b
30.5
Gain 802.11g
24
Quickly measure the Duty Cycle again of the signal.
When using CRTU II, this will depend on the version and the bit rate. (version 2.2.9.3000)
The duty cycle x delivers a correction factor to determine EIRP.
Page: 4 of 57
Version:1.0
1.3.
Test Channel
Working Frequency of Each Channel:
Channel
Frequency
Channel
Frequency
Channel
Frequency
Channel
Frequency
Channel 01: 2412 MHz Channel 02: 2417 MHz Channel 03: 2422 MHz Channel 04: 2427 MHz
Channel 13: 2472 MHz
It is necessary to measure e.i.r.p on following frequencies:
- 2412 MHz
- 2442 MHz
- 2472 MHz
Note:
1. The EUT is including two models, The MS-1032 and MS-1031for MSI, the M640 and M645 for different
marketing requirement, the 6400 and 6400A for AVERATEC.
2. The different of the each model is shown as below:
Model Number
Trade Name
MS-1032, MS-1031, M640, M645
MSI
6400,6400A
AVERATEC
3. The EUT is including six models for different marketing requirement.
4. Regarding to the frequency band operations, the lowest data rate and the lowest, middle and highest
frequency of channel were selected to perform the test, then the measured data was shown on this report.
5. This device is a composite device in accordance with ETSI regulations.
6. QuieTek has verified all construction and function in typical operation. All the test modes were carried out
with the EUT in normal operation, which was shown in this test report and defined as:
Mode 1: Transmit, WM3B2200BG-802.11b
EMI Test Mode
Mode 2: Transmit, WM3B2200BG-802.11g
Page: 5 of 57
Version:1.0
1.4.
Tested System Details
The types for all equipment, plus descriptions of all cables used in the tested system
(including inserted cards) are:
Product
Adapter
(1)
Manufacturer
Model No.
Serial No.
FCC ID
Power Cord
LITEON
PA-1750-01
N/A
DoC
Non-Shielded, 1.8m
Signal Cable Type
Cable Out Line
Power Card
A.
B.
1.5.
Signal cable Description
Non-Shielded 1.8m
Non-Shielded, 1.8m
Configuration of tested System
LISN
B
EUT
1.6.
(1)
(2)
(3)
(4)
(5)
(6)
A
(1)
EUT Exercise Software
Setup the EUT and simulators as shown on 1.5.
Turn on the power of all equipment.
Notebook reads data from disk.
Messages will be transmitted and received through EUT.
Test is based on the mandatory continuous transmitter.
Repeat the above procedure (3) to (5).
Page: 6 of 57
Version:1.0
1.7.
Test Facility
Ambient conditions in the laboratory:
Items
Test Item
Temperature (°C)
Humidity (%RH)
Site Description:
ETSI EN 300 328
Required
Actual
15-35
20-35
20-75
50-55
June 22, 2001 File on
Federal Communications Commission
FCC Engineering Laboratory
7435 Oakland Mills Road
Columbia, MD 21046
Reference 31040/SIT1300F2
July 03, 2001 Accreditation on NVLAP
NVLAP Lab Code: 200533-0
Site Name:
Quietek Corporation
Site Address:
No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen,
Lin-Kou Shiang, Taipei,
Taiwan, R.O.C.
TEL: 886-2-8601-3788 / FAX : 886-2-8601-3789
E-Mail : [email protected]
Page: 7 of 57
0914
Version:1.0
2.
Effective radiated Power
2.1.
Test Equipment
The following test equipments are used during the effective radiated power measurement:
Equipment
Manufacture
Model No
Last Cal.
Power Meter
Agilent
E4416A
Oct, 2004
Power Sensor
Agilent
E9323A
Oct, 2004
Spectrum Analyzer
Advantest
R3162C
May, 2004
Signal Generator
R/S
SMT03
Feb, 2005
Note:
2.2.
Remark
1. All equipments upon which need to be calibrated are with calibration period of 1 year.
Test Setup
Conducted Power Measurement
RF Cable
Power
EUT
Meter
SMA
Connecter
2.3.
Test Condition
The normal temperature and humidity conditions for tests shall be any convenient
combination of temperature and humidity within the following ranges:
- Temperature: +15°C to +35°C;
- Relative humidity: 20 % to 75 %.
2.4.
Limits
The effective radiated power is defined as the total power of the transmitter and is
calculated according to the test procedure. The effective radiated power shall be equal to or
less than -10 dBW (100 mW) e.i.r.p.
Page: 8 of 57
Version:1.0
2.5.
Test Procedure
The measurement is performed using normal operation of the equipment with test
modulation applied. The test procedure is as follows:
step 1:
- the output of the transmitter is coupled to a diode detector;
- the output of the diode detector is connected to the oscilloscope (spectrum analyzer is used
as oscilloscope , while it is in zero span setting) ;
- the observed duty cycle of the transmitter (Tx on/(Tx on +Tx off)) is noted as x, (0 < x < 1)
step 2:
- the average output power of the transmitter is determined using a RF power meter. The
observed value is recorded as "A" (in dBm);
- the e.i.r.p.is calculated from the above measured power output A, the observed duty cycle x,
and the applicable antenna assembly gain "G" in dBi, according to the formula:
P = A + G + 10 log (1/x);
step 3:
- the measurement set up as given under step 1 is used to determine on the oscilloscope the
peak of the envelope of the output signal of the transmitter;
- the maximum deviation of the Y-trace of the spectrum shall be recorded as "B".
step 4:
- the transmitter is replaced by a signal generator. The output frequency of the signal is made
equal to the centre of the frequency range occupied by the transmitter;
- the signal generator is unmodulated. The output power of the signal generator is raised to a
level such that the deviation of the Y-trace of the oscilloscope reaches level B, as
indicated in step 3;
- this output power level "C" (in dBm) of the signal generator is determined using a power
meter ,
- level C shall not exceed by more than 3 dB the value specified in clause 4.3.1.2. minus the
applicable antenna assembly gain G in dBi.
2.6.
Test Specification
According to ETSI EN 300 328: V1.4.1 (2003-4) clause 5.7.2.2
2.7.
Uncertainty
The measurement uncertainty is defined as ± 1.27dB
2.8.
Test Result
The emission from the EUT was below the specified limits. The worst-case emissions are
shown in section 2.9. The acceptance criterion was met and the EUT passed the test.
Page: 9 of 57
Version:1.0
2.9.
Test Data of Effective Radiated Power
Product
Test Item
Test Mode
: MEGA BOOK
: Effective Radiated Power
: Mode 1: Transmit, WM3B2200BG-802.11b
Test Conditions
Tnom 25oC Vnom 230V
Test Conditions
Tnom 25oC
Note:
Vnom 230V
Peak Out Power
Average Out Power
(MHz)
(dBm)
(dBm)
01
2412
17.92
15.50
07
2442
17.80
15.40
13
2472
17.98
15.70
Channel
Freq.
(MHz)
Measured
output power
A (dBm)
Antenna
Gain (dBi)
Effective
10log(1/x) radiated power
P (dBm) e.i.r.p
Limit
(dBm)
01
2412
15.50
1.73
0.25
17.48
20
07
2442
15.40
1.73
0.25
17.38
20
13
2472
15.70
1.73
0.25
17.68
20
P is the effective radiated power as defined in clause 5.7.2.2 step 2，P=A+G+10log(1/x)
Test Conditions
Tnom 25oC Vnom 230V
Note:
Freq.
Channel
Freq.
Peak Out Power
Antenna Gain
Peak Power
(MHz)
(dBm)
(dBi)
Pk(dBm)
01
2412
17.92
1.73
19.65
07
2442
17.80
1.73
19.53
13
2472
17.98
1.73
19.71
Channel
Pk is the peak power as defined in clause 5.7.2.2 step 4, increased with the declared antenna gain (C+G)
Test Result
PASS
Page: 10 of 57
Version:1.0
Product
Test Item
Test Mode
: MEGA BOOK
: Effective Radiated Power
: Mode 2: Transmit, WM3B2200BG-802.11g
Test Conditions
Tnom 25oC Vnom 230V
Test Conditions
Tnom 25oC
Note:
Vnom 230V
Average Out Power
(MHz)
(dBm)
(dBm)
01
2412
18.34
13.89
07
2442
18.21
13.78
13
2472
18.02
13.85
Channel
Freq.
Freq.
(MHz)
Measured
output power
A (dBm)
Effective
Antenna
Gain (dBi)
10log(1/x) radiated power
P (dBm) e.i.r.p
Limit
(dBm)
01
2412
13.89
1.73
0.31
15.93
20
07
2442
13.78
1.73
0.31
15.82
20
13
2472
13.85
1.73
0.31
15.89
20
P is the effective radiated power as defined in clause 5.7.2.2 step 2，P=A+G+10log(1/x)
Test Conditions
Tnom 25oC Vnom 230V
Note:
Peak Out Power
Channel
Peak Out Power
Antenna Gain
Peak Power
(MHz)
(dBm)
(dBi)
Pk(dBm)
01
2412
18.34
1.73
20.07
07
2442
18.21
1.73
19.94
13
2472
18.02
1.73
19.75
Channel
Freq.
Pk is the peak power as defined in clause 5.7.2.2 step 4, increased with the declared antenna gain (C+G)
Test Result
PASS
Page: 11 of 57
Version:1.0
3.
Antenna Assembly Summary
Antenna Part Number
(Main)S79-1800141-H39
(Aux)S79-1800131-H39
Manufacture
HIGH-TEK
HIGH-TEK
Antenna Type
PIFA
PIFA
Page: 12 of 57
Peak Gain W/ Cable loss
Frequency (MHz) Max Gain (dBi)
2400-2500
1.73
5150-5350
--
5470-5725
--
5725-5850
--
2400-2500
1.07
5150-5350
--
5470-5725
--
5725-5850
--
Version:1.0
4.
Spurious Emission
4.1.
Test Equipment
The following test equipment are used during the radiated spurious emission test:
Test Site
Equipment
Manufacturer Model No./Serial No.
Last Cal.
R&S
ESVS 10 / 834468/003
July, 2004
Spectrum Analyzer
Advantest
R3162/ 00803480
May, 2004
Pre-Amplifier
Advantest
BB525C/ 3307A01812
May, 2004
Bilog Antenna
SCHAFFNER
CBL6112B / 2697
Nov., 2004
R&S
ESCS 30 / 836858 / 022
Nov., 2004
Spectrum Analyzer
Advantest
R3162 / 100803466
May, 2004
Pre-Amplifier
Advantest
BB525C/3307A01814
May, 2004
Bilog Antenna
SCHAFFNER
CBL6112B / 2705
Oct., 2004
Horn Antenna
ETS
3115 / 0005-6160
July, 2004
Pre-Amplifier
QTK
QTK-AMP-01/ 0001
July, 2004
R&S
ESI 26 / 838786 / 004
May, 2004
Spectrum Analyzer
Advantest
R3162 / 100803480
May, 2004
Pre-Amplifier
QTK
QTK-AMP-03 / 0003
May, 2004
Bilog Antenna
SCHAFFNER
CBL6112B / 2697
May, 2004
Horn Antenna
ETS
3115 / 0005-6160
July, 2004
Pre-Amplifier
QTK
QTK-AMP-01 / 0001
July, 2004
Site # 1 Test Receiver
Note:
1. All equipments that need to be calibrated are with calibration period of 1 year.
2. Mark “X” test instruments are used to measure the final test results.
Page: 13 of 57
Version:1.0
4.2.
Test Setup
Under 1GHz Test Setup
3m
FRP Dome
Antenna Mast Bilog
Antenna
Antenna height can
be moved from 1m
to 4m, Antenna and
turntable distance 3m
EUT
1.5m
Fully soldered Metal Ground
Receiver
Above 1GHz Test Setup
3m
FRP Dome
Antenna Mast Horn
Antenna
Antenna height can
be moved from 1m
to 4m, Antenna and
turntable distance 3m
EUT
1.5m
Fully soldered Metal GroundSpectrum
Page: 14 of 57
Amplifier
Version:1.0
4.3.
Test Condition
The normal temperature and humidity conditions for tests shall be any convenient
combination of temperature and humidity within the following ranges:
- Temperature: +15°C to +35°C;
- Relative humidity: 20 % to 75 %.
4.4.
Limits
Transmitter limits for narrowband spurious emissions
(EN 300 328 V1.4.1—Clause 4.3.4.2)
Frequency Range
Limit when operating
Limit when in standby
30MHz to 1 GHz
-36 dBm
-57 dBm
Above 1 GHz to 12.75
GHz
-30 dBm
-47 dBm
1.8 GHz to 1.9 GHz
-47 dBm
-47 dBm
5.15 GHz to 5.3 GHz
4.5.
Test Procedure
The EUT and its simulators are placed on a turn table which is 1.5 meters above ground. The
turn table can rotate 360 degrees to determine the position of the maximum emission level.
The EUT was positioned such that the distance from antenna to the EUT was 3 meters.The
antenna can move up and down between 1 meter and 4 meters to find out the maximum
emission level.
Broadband antenna (calibrated bi-log and horn antenna) are used as a receiving antenna.
Both horizontal and vertical polarization of the antenna are set on measurement. And a high
frequency preamlifier were used increase the sensitivity of the measuring. In order to find the
maximum emission, all of the interface cables must be manipulated according to ETSI EN
300 328:V1.4.1 (2003-04) on radiated measurement.
The additional notch filter below 1GHz was used to measure the level of harmonics radiated
emission during field strength of harmonics measurement. The bandwidth below 1GHz
setting on the field strength meter (R&S Test Receiver ESCS 30 )is 120 kHz, and 100 kHz
bandwidth is adopted above 1GHz. The frequency range from 30MHz to 12.75GHz is
checked.
Page: 15 of 57
Version:1.0
4.6.
Test Specification
According to ETSI EN 300 328:V1.4.1 (2003-04) clause 5.7.2.2
4.7.
Uncertainty
The measurement uncertainty
above 1G is defined as ± 3.9 dB
under 1G is defined as ± 3.8 dB
4.8.
Test Result
The emission from the EUT was below the specified limits. The worst-case emissions are
shown in section 3.9. The acceptance criterion was met and the EUT passed the test.
Page: 16 of 57
Version:1.0
4.9.
Test Data of Spurious Emission
Product
Test Item
Test Site
Test Mode
:
MEGA BOOK
:
:
:
Spurious Emission
No.3 Chamber
Mode 1: Transmit, WM3B2200BG-802.11b(2442MHz)
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
Peak Detector (Horizontal)
300.200
-54.94
-56.19
1.26
-36.00
18.94
432.380
-58.27
-59.34
1.08
-36.00
22.27
500.420
-59.41
-60.42
1.02
-36.00
23.41
541.240
-59.95
-60.95
1.00
-36.00
23.95
667.600
-59.79
-60.59
0.80
-36.00
23.79
834.770
-58.85
-59.40
0.55
-36.00
22.85
Note:
1. All reading are peak value.
2. “
”, means this data is the worst emission level.
3. Emission Level = Reading Level + Correction Factor
4. Correction Factor = Antenna Gain – Cable Loss
Page: 17 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
1192.380
-63.25
-67.13
3.88
-30.00
33.25
1324.650
-64.72
-68.49
3.78
-30.00
34.72
1797.600
-57.69
-61.33
3.64
-30.00
27.69
2238.480
-58.68
-64.45
5.77
-30.00
28.68
Note:
2. “
Page: 18 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
3235.510
-56.63
-62.79
6.16
-30.00
26.63
4887.780
-58.66
-64.83
6.18
-30.00
28.66
Note:
2. “
Page: 19 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-63.39
7.37
-30.00
26.02
6763.530
-56.02
Note:
2. “
Page: 20 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-63.59
6.77
-30.00
26.82
7328.660
-56.82
Note:
2. “
Page: 21 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-55.19
7.07
-30.00
18.12
9765.530
-48.12
Note:
2. “
Page: 22 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-59.30
6.82
-30.00
22.48
12213.430
-52.48
Note:
2. “
Page: 23 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
Peak Detector (Vertical)
282.710
-55.49
-56.81
1.33
-36.00
19.49
300.200
-53.78
-55.03
1.26
-36.00
17.78
366.290
-60.06
-61.24
1.18
-36.00
24.06
420.720
-58.35
-59.40
1.05
-36.00
22.35
539.300
-61.18
-62.18
1.01
-36.00
25.18
751.180
-60.69
-61.44
0.75
-36.00
24.69
Note:
2. “
Page: 24 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
1200.400
-61.10
-64.98
3.88
-30.00
31.10
1332.670
-62.98
-66.74
3.76
-30.00
32.98
1769.540
-58.61
-62.26
3.66
-30.00
28.61
2238.480
-59.87
-65.64
5.77
-30.00
29.87
Note:
2. “
Page: 25 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
3256.510
-51.69
-57.85
6.16
-30.00
21.69
4887.780
-54.18
-60.35
6.18
-30.00
24.18
Note:
2. “
Page: 26 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-63.99
7.37
-30.00
26.62
6951.900
-56.62
Note:
2. “
Page: 27 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-62.88
6.77
-30.00
26.11
7328.660
-56.11
Note:
2. “
Page: 28 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-52.02
7.07
-30.00
14.95
9765.530
-44.95
Note:
2. “
Page: 29 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-59.46
6.82
-30.00
22.64
12213.430
-52.64
Note:
2. “
Page: 30 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Mode 2: Transmit, WM3B2200BG-802.11g(2442MHz)
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
278.820
-59.94
-61.31
1.37
-36.00
23.94
298.260
-57.87
-59.13
1.27
-36.00
21.87
364.350
-60.18
-61.35
1.17
-36.00
24.18
498.480
-59.29
-60.30
1.01
-36.00
23.29
537.350
-60.48
-61.49
1.01
-36.00
24.48
667.600
-59.59
-60.39
0.80
-36.00
23.59
Note:
2. “
Page: 31 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
1196.390
-62.80
-66.68
3.88
-30.00
32.80
1769.540
-56.69
-60.34
3.66
-30.00
26.69
2198.400
-63.12
-68.92
5.80
-30.00
33.12
2238.480
-53.50
-59.27
5.77
-30.00
23.50
Note:
2. “
Page: 32 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
3256.510
-56.46
-62.62
6.16
-30.00
26.46
4887.780
-62.30
-68.47
6.18
-30.00
32.30
Note:
2. “
Page: 33 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-63.60
7.36
-30.00
26.24
6871.740
-56.24
Note:
2. “
Page: 34 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-62.99
6.77
-30.00
26.22
7328.660
-56.22
Note:
2. “
Page: 35 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-61.64
7.07
-30.00
24.57
9769.540
-54.57
Note:
2. “
Page: 36 of 57
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-58.96
6.82
-30.00
22.14
12213.430
-52.14
Note:
2. “
Page: 37 of 108
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
179.680
-60.00
-61.58
1.58
-36.00
24.00
282.710
-53.37
-54.69
1.33
-36.00
17.37
300.200
-53.54
-54.79
1.26
-36.00
17.54
366.290
-60.57
-61.75
1.18
-36.00
24.57
418.780
-58.56
-59.61
1.05
-36.00
22.56
496.530
-61.60
-62.61
1.01
-36.00
25.60
Note:
2. “
Page: 38 of 108
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
1192.380
-61.58
-65.46
3.88
-30.00
31.58
1324.650
-62.33
-66.10
3.78
-30.00
32.33
1769.540
-59.07
-62.72
3.66
-30.00
29.07
2238.480
-55.23
-61.00
5.77
-30.00
25.23
Note:
2. “
Page: 39 of 108
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
3256.510
-51.52
-57.68
6.16
-30.00
21.52
4887.780
-60.67
-66.84
6.18
-30.00
30.67
Note:
2. “
Page: 40 of 108
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-63.93
7.37
-30.00
26.56
6959.920
-56.56
Note:
2. “
Page: 41 of 108
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-64.44
6.77
-30.00
27.67
7328.660
-57.67
Note:
2. “
Page: 42 of 108
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-61.90
7.07
-30.00
24.83
9769.540
-54.83
Note:
2. “
Page: 43 of 108
Version:1.0
Product
Test Item
Test Site
Test Mode
:
:
:
:
MEGA BOOK
Spurious Emission
No.3 Chamber
Frequency
Emission
Level
Reading
Level
Correction
Factor
Limit
Margin
(MHz)
(dBm)
(dBm)
(dB)
(dBm)
(dB)
-59.40
6.82
-30.00
22.58
12213.430
-52.58
Note:
2. “
Page: 44 of 57
Version:1.0
5.
Measurement Uncertainty Values
The maximum values of the absolute measurement uncertainties of the measurements
defined in the present document shall not exceed the values given below:
Parameter
Uncertainty
Radio frequency
1 x10 –5
Total RF power, conducted
1.5 dB
RF power density, conducted
3 dB
Spurious emissions, conducted
3 dB
All emissions, radiated
6 dB
Temperature
1oC
Humidity
5%
DC and low frequency voltages
3%
For the measurement methods according to the present document these uncertainty figures
are valid to a confidence level of 95 % calculated according to the methods described in ETR
028 [5], on guidelines for estimating uncertainties in measuring methods.
Page: 45 of 57
Version:1.0
6.
EMC Reduction Method During Compliance Testing
No modification was made during testing.
Page: 46 of 57
Version:1.0
Attachment 1: EUT Test Photographs
Front View of Spurious Emission Test
Front View of Spurious Emission Test (Horn)
Page: 47 of 57
Version:1.0
Attachment 2 : EUT Detailed Photographs
(1) EUT Photo
(2) EUT Photo
Page: 48 of 57
Version:1.0
(3) EUT Photo
(4) EUT Photo
Page: 49 of 57
Version:1.0
(5) EUT Photo
(6) EUT Photo
Page: 50 of 57
Version:1.0
(7) EUT Photo
(8) EUT Photo
Page: 51 of 57
Version:1.0
(9) EUT Photo
(10) EUT Photo
Page: 52 of 57
Version:1.0
(11) EUT Photo
(12) EUT Photo
Page: 53 of 57
Version:1.0
(13) EUT Photo
(14) EUT Photo
Page: 54 of 57
Version:1.0
(15) EUT Photo
(16) EUT Photo
Page: 55 of 57
Version:1.0
(17) EUT Photo
(18) EUT Photo
Page: 56 of 57
Version:1.0
(19) EUT Photo
(20) EUT Photo
Page: 57 of 57
Version:1.0

WLAN NB report

Transcription

Similar documents

MS-7252 CE report-961022

IT REPORT