catalog - john deere engine
Transcription
catalog - john deere engine
POWER PRODUCTS, INC. Replacement Parts for John Deere® Engines Agricultural and Industrial Applications - Engine Index - Machine to Engine Application Guide - Engine Parts Listing This is a list of our most popular models. We have parts for other applications not listed in catalog. Call for availability and pricing. Endurance Power Products (800) 467-5545 John Deere® - Diesel Engines PAGE CID/ LITER ENGINE MODEL JD135-1 135 3-135 3 JD145-1 145 4-145 4 JD-152-1 152 3-152 Early 3 JD-152-2 152 3-152 Late 3 JD155-1 155 4-155 4 JD164-1 164 3-164 Early 1 3 -> 179601 1.19 pin, orings on liner 4.02 4.33 JD164-2 164 3-164 Early 2 3 -> 179601 1.19 pin, orings in block 4.02 4.33 JD164-3 164 3-164 Late 3 179602 -> 1.37 pin, orings in block 4.02 4.33 JD165-1 165 4-165 Cylinder liner plate 3.875 3.500 JD179-1 179 3-179D 3 4.19 4.33 JD179-2 179 3-179T 3 4.19 4.33 JD202-1 202 4-202 Early 4 -> 158257 Orings on liner 3.86 4.33 JD202-2 202 4-202 Late 4 158258 -> Orings in block 3.86 4.33 JD219-1 219 4-219 Early 1 4 -> 275483 1.19 pin, orings on liner 4.02 4.33 JD219-2 219 4-219 Early 2 4 -> 275483 1.19 pin, orings in block 4.02 4.33 JD219-3 219 4-219 Late 4 275484 -> 1.37 pin, orings in block 4.02 4.33 JD239-1 239 4-239D 4 4.19 4.33 JD239-2 239 4-239T 4 4.19 4.33 JD270-1 270 4-270 Early 4 -> 280000 Original block 4.25 4.75 JD270-2 270 4-270 Replacement 4 -> 280000 Replacement block 4.25 4.75 JD270-3 270 4-270 Late 4 280000 -> 4.25 4.75 JD276-1 276 4-276D Small pin 4 Piston pin diameter 1.37 4.19 5.00 JD276-2 276 4-276D Big pin 4 Piston pin diameter 1.62 4.19 5.00 JD276-3 276 4-276T 4 Piston pin diameter 1.62 4.19 5.00 JD303-1 303 6-303 Early 6 -> 158795 Orings on liner 3.86 4.33 JD303-2 303 6-303 Late 6 158796 -> Orings in block 3.86 4.33 JD329-1 329 6-329 Early 1 6 -> 277548 1.19 pin, orings on liner 4.02 4.33 JD329-2 329 6-329 Early 2 6 -> 277548 1.19 pin, orings in block 4.02 4.33 JD329-3 329 6-329 Late 6 277549 -> 1.37 pin, orings in block 4.02 4.33 JD359-1 359 6-359D 6 4.19 4.33 JD359-2 359 6-359T 6 4.19 4.33 JD378-1 378 2-378 2 6.125 6.375 CYL SERIAL NUMBER NOTES Bore Stroke 3.86 3.86 Cylinder liner plate 3.625 3.500 -> 154765 Orings on liner 3.86 4.33 154766 -> Orings in block 3.86 4.33 3.750 2 cylinder (continued on next page) Endurance Power Products (800) 467-5545 John Deere® - Diesel Engines PAGE CID/ LITER JD404-1 404 JD404-2 ENGINE MODEL CYL SERIAL NUMBER 6-404D Early 6 -> 214999 404 6-404D Replacement 6 -> 214999 JD404-3 404 6-404D Mid 6 JD404-4 404 6-404D Late JD404-5 404 JD404-6 Bore Stroke Original block 4.25 4.75 Replacement block 4.25 4.75 215000 - 335845 4.25 4.75 6 335846 -> 4.25 4.75 6-404T/A Early 6 -> 335845 4.25 4.75 404 6-404T/A Late 6 335846 -> 4.25 4.75 JD414-1 414 6-414D 6 4.19 5.00 JD414-2 414 6-414T 6 4.19 5.00 JD466-1 466 6-466D 6 4.25 4.75 JD466-2 466 6-466T/A Early 6 T -> 253372;A -> 67684 4.25 4.75 JD466-3 466 6-466T/A Late 6 T 253373 ->; A 67685 -> 4.25 4.75 JD531-1 531 6-531D Early 6 4.75 5.00 JD531-2 531 6-531D Late 6 4.75 5.00 JD531-3 531 6-531T 6 4.75 5.00 JD531-4 531 6-531A 6 4.75 5.00 JD619-1 619 6-619 Early 6 -> 33814 5.12 5.00 JD619-2 619 6-619 Mid 6 33815 - 49059 5.12 5.00 JD619-3 619 6-619 Late 6 49060 -> 5.12 5.00 JD3029-1 2.9 3029D 3 4.19 4.33 JD3029-2 2.9 3029T 3 4.19 4.33 JD3029-3 2.9 3029 PT 3 4.19 4.33 JD4039-1 3.9 4039D 4 4.19 4.33 JD4039-2 3.9 4039T 4 4.19 4.33 JD4045-1 4.5 4045D 4 4.19 5.00 JD4045-2 4.5 4045T 4 4.19 5.00 JD4045-3 4.5 4045 PT 4 4.19 5.00 JD6059-1 5.9 6059D 6 4.19 4.33 JD6059-2 5.9 6059T 6 4.19 4.33 JD6068-1 6.8 6068D 6 4.19 5.00 JD6068-2 6.8 6068T 6 4.19 5.00 JD6068-3 6.8 6068 PT 6 4.19 5.00 JD6076-1 7.6 6076 T/A/H 6 4.25 4.75 JD6081-1 8.1 6081 6 4.56 5.06 JD6081-1 8.1 6081PT 6 4.56 5.06 JD6101-1 10.1 6101 6 5.12 5.00 JD6105-1 10.5 6105 6 Powertech® 5.00 5.43 JD6125-1 12.5 6125 6 Powertech® 5.00 6.50 Endurance Power Products NOTES Powertech® Powertech® Powertech® Powertech® (800) 467-5545 John Deere® - Gas/LP Engines PAGE CID / LITER ENGINE MODEL CYL JD100-1 100 2-100 JD113-1 113 JD115-1 NOTES BORE STROKE 2 4.0000 4.0000 2-113 2 4.2500 4.0000 115 4-115 4 3.5000 3.0000 JD135-2 135 3-135 3 3.8600 3.8600 JD145-2 145 4-145 4 3.6250 3.5000 JD149-1 149 2-149 2 4.2500 5.2500 JD152-3 152 3-152 3 3.8583 4.2380 JD164-4 164 3-164 3 4.0200 4.3280 JD165-2 165 4-165 4 3.8750 3.5000 JD175-1 175 2-175 2 4.5000 5.5000 JD180-1 180 4-180 4 3.8600 3.8600 JD190-1 190 2-190 2 4.6875 5.5000 JD201-1 201 4-201 4 4.0000 4.0000 JD202-3 202 4-202 4 3.8600 4.3300 JD217-1 217 6-217 6 3.6250 3.5000 JD219-4 219 4-219 4 4.0200 4.3280 JD227-1 227 4-227 4 4.2500 4.0000 JD241-1 241 4-241 4 4.2500 4.2500 JD248-1 248 6-248 6 3.8750 3.5000 JD301-1 301 6-301 6 4.0000 4.0000 JD303-3 303 6-303 6 3.8600 4.3300 JD303-4 303 2-303 2 5.5000 6.3750 JD309-1 309 2-309 2 5.5000 6.5000 JD321-1 321 2-321 2 5.5000 6.7500 JD329-4 329 6-329 6 4.0200 4.3300 JD341-1 341 6-341 6 4.2500 4.0000 JD362-1 362 6-362 6 4.2500 4.2500 JD362-2 362 2-362 2 6.0000 6.3750 JD380-1 380 2-380 2 5.8750 7.0000 JD414-3 414 2-414 2 6.1250 7.0000 Endurance Power Products Cylinder liner plate Cylinder liner plate Cylinder liner plate (800) 467-5545 Endurance Power Products (800) 467-5545 POWER PRODUCTS, INC. Application Guide for John Deere® Equipment to Engine Model John Deere Applications Machine Type Machine note A A Tractor Tractor A/AN/AH/AW: sn -> 487,999 A/AN/AH/AW: sn 488,000 -> G 309 / 5.1L G 321 / 5.3L JD309-1 JD321-1 AO AO Tractor Tractor AO: sn -> 259,999 AO: sn 260,000 -> G 309 / 5.1L G 321 / 5.3L JD309-1 JD321-1 AR AR Tractor Tractor AR: sn -> 259,999 AR: sn 260,000 -> G 309 / 5.1L G 321 / 5.3L JD309-1 JD321-1 B B B Tractor Tractor Tractor Unstyled; sn -> 59,999 Styled early: sn 60,000 - 200,999 Styled late: sn 201,000 -> G 149 / 2.4L G 175 / 2.9L G 190 / 3.1L JD149-1 JD175-1 JD190-1 BN BN BN Tractor Tractor Tractor Unstyled; sn -> 59,999 Styled early: sn 60,000 - 200,999 Styled late: sn 201,000 -> G 149 / 2.4L G 175 / 2.9L G 190 / 3.1L JD149-1 JD175-1 JD190-1 BO BO Tractor Tractor sn -> 328,999 sn 329,000 -> G 149 / 2.4L G 175 / 2.9L JD149-1 JD175-1 BR BR Tractor Tractor sn -> 328,999 sn 329,000 -> G 149 / 2.4L G 175 / 2.9L JD149-1 JD175-1 BW BW BW Tractor Tractor Tractor Unstyled; sn -> 59,999 Styled early: sn 60,000 - 200,999 Styled late: sn 201,000 -> G 149 / 2.4L G 175 / 2.9L G 190 / 3.1L JD149-1 JD175-1 JD190-1 CTS Combine 6076H D 6076 T/A/H JD6076-1 CTS2 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 G Tractor G/GH/GN/GW G 414 / 6.8L JD414-3 M Tractor 2 CYL G 100 / 1.6L JD100-1 MC Tractor 2 CYL G 100 / 1.6L JD100-1 MI Tractor 2 CYL G 100 / 1.6L JD100-1 MT Tractor 2 CYL G 100 / 1.6L JD100-1 24 Skidsteer D 152 Late JD34 Wheel Excavator D 239D JD239-1 40 Tractor G 100 / 1.6L JD100-1 JD44 Wheel Excavator D 239D JD239-1 TC44H Tool Carrier D 4.5 PT JD4045-3 45 Combine G 165 / 2.7L JD165-2 JD45 Crawler Excavator D 239D JD239-1 50 Tractor G 190 / 3.1L JD190-1 JD54 Wheel Excavator D 359D JD359-1 TC54H Tool Carrier D 6.8 PT JD6068-3 55 55 Combine Combine G 217 / 3.6L G 303 / 5.0L JD217-1 JD303-3 JD55 Crawler Excavator D 359D JD359-1 60 Tractor G 321 / 5.3L JD321-1 TC62H Tool Carrier 65 Combine G 217 / 3.6L JD217-1 JD65 Crawler Excavator D 359T JD359-2 70 70 70 Excavator Tractor Tractor D 239D D 378 / 6.2L G 380 / 6.2L JD239-1 JD378-1 JD380-1 70D Excavator D 239D JD239-1 105 Combine G 248 / 4.1L JD248-1 2 CYL Turbo high HP Turbo high HP Turbo high HP Endurance Power Products Fuel / Engine Model D 6.8 PT JD - 1 Engine serial # 154766 -> Page JD152-2 JD6068-3 (800) 467-5545 John Deere Applications Machine Type Machine note 95 95 Combine Combine G 217 / 3.6L G 303 / 5.0L LX100-2 LX100-2 Loader Loader D 6068D D 6068T JD6068-1 JD6068-2 110 Excavator Turbo D 4.5 PT JD4045-3 120 Excavator Turbo D 4.5 PT JD4045-3 120C Excavator 4.5T PT high HP D 4.5 PT JD4045-3 160LC Excavator Turbo D 4.5 PT JD4045-3 190E 190E Excavator Excavator Natural D 4039D D 4.5 PT JD4039-1 JD4045-3 200LC Excavator Turbo high HP D 6.8 PT JD6068-3 210C Loader Backhoe 210LE Loader Backhoe 215 215 Windrower Windrower 230LC Excavator Turbo high HP D 6.8 PT JD6068-3 230LCR Excavator Turbo D 6.8 PT JD6068-3 230LCRD Excavator Turbo D 6.8 PT JD6068-3 240 Skidsteer Natural D 2.9 PT JD3029-3 244E Loader D 239D JD239-1 250 Skidsteer Natural D 2.9 PT JD3029-3 260 Skidsteer Natural D 2.9 PT JD3029-3 2264 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 270 Skidsteer Natural D 4.5 PT JD4045-3 270LC Excavator Turbo high HP D 6.8 PT JD6068-3 280 Skidsteer European; 4.5D PT D 4.5 PT JD4045-3 290D 290D Excavator Excavator D 239D D 4039D JD239-1 JD4039-1 300B 300B 300B Loader Backhoe Loader Backhoe Loader Backhoe G 135 / 2.2L D 152 Early D 152 Late 300D 300D Loader Backhoe Loader Backhoe D 4039D D 4039T JD300 JD300 JD300 Loader Backhoe Loader Backhoe Loader Backhoe JD300A JD300A Loader Backhoe Loader Backhoe 301 301 301 Loader Backhoe Loader Backhoe Loader Backhoe 301A 301A Natural Fuel / Engine Model Engine serial # JD217-1 JD303-3 D 239D JD239-1 D 4.5 PT JD4045-3 G 135 / 2.2L G 145 / 2.4L Industrial tractor Page JD135-2 JD145-2 -> 154765 154766 -> JD135-2 JD152-1 JD152-2 JD4039-1 JD4039-2 G 135 / 2.2L D 152 Early D 152 Late -> 154765 154766 -> JD135-2 JD152-1 JD152-2 D 152 Early D 152 Late -> 154765 154766 -> JD152-1 JD152-2 G 135 / 2.2L D 152 Early D 152 Late -> 154765 154766 -> JD135-2 JD152-1 JD152-2 Loader Backhoe Loader Backhoe D 152 Early D 152 Late -> 154765 154766 -> JD152-1 JD152-2 302 302 Loader Backhoe Loader Backhoe D 164 Late G 164 / 2.7L 179602 -> JD164-3 JD164-4 302A 302A Loader Backhoe Loader Backhoe D 164 Late G 164 / 2.7L 179602 -> JD164-3 JD164-4 310A Loader Backhoe D 219 Late 275484 -> JD219-3 Industrial tractor Endurance Power Products JD - 2 (800) 467-5545 John Deere Applications Machine Type Machine note 310B Loader Backhoe D 219 Late 310C 310C 310C 310C Loader Backhoe Loader Backhoe Loader Backhoe Loader Backhoe D D D D 239D 239T 4039D 4039T JD239-1 JD239-2 JD4039-1 JD4039-2 310D 310D Loader Backhoe Loader Backhoe D 239T D 4039T JD239-2 JD4039-2 310E Loader Backhoe Natural D 4.5 PT JD4045-3 310G Loader Backhoe Natural / Turbo D 4.5 PT JD4045-3 310SE Loader Backhoe Turbo D 4.5 PT JD4045-3 310SG Loader Backhoe Turbo D 4.5 PT JD4045-3 JD310 JD310 JD310 Loader Backhoe Loader Backhoe Loader Backhoe European D 164 Late G 164 / 2.7L D 179D 315C 315C 315C Loader Backhoe Loader Backhoe Loader Backhoe D 239D D 239T D 4039T JD239-1 JD239-2 JD4039-2 315CH 315CH Loader Backhoe Loader Backhoe D 239D D 239T JD239-1 JD239-2 315D 315D 315D Loader Backhoe Loader Backhoe Loader Backhoe D 239D D 4039D D 4039T JD239-1 JD4039-1 JD4039-2 315SE Loader Backhoe Turbo D 4.5 PT JD4045-3 315SG Loader Backhoe Turbo D 4.5 PT JD4045-3 320 Tractor 2 CYL G 100 / 1.6L 324H Loader Natrual D 4.5 PT 330 Tractor 2 CYL G 100 / 1.6L 330B Log Loader 4.5T PT high HP; trailer mounted D 4.5 PT JD4045-3 330CR Excavator 6081T D 6081 / 8.1 PT JD6081-1 330LC Excavator 8.1T PT D 6081 / 8.1 PT JD6081-1 335 Log Loader 4.5T PT high HP; trailer mounted D 4.5 PT JD4045-3 340D 340D Skidder Skidder D 276D Big pin D 276T JD276-2 JD276-3 344E Loader D 276D Big pin JD276-2 344G 344G Loader Loader D 4045T D 4.5 PT JD4045-2 JD4045-3 344H 344H Loader Loader 4.5T PT Natrual D 4.5 PT D 4.5 PT JD4045-3 JD4045-3 350C 350C Crawler Dozer Crawler Dozer European D 164 Late D 179D 350D Crawler Dozer D 179D JD350 JD350 Crawler Dozer Crawler Dozer D 152 Early D 152 Late -> 154765 154766 -> JD152-1 JD152-2 JD350A JD350A JD350A Crawler Dozer Crawler Dozer Crawler Dozer G 135 / 2.2L D 152 Early D 152 Late -> 154765 154766 -> JD135-2 JD152-1 JD152-2 Endurance Power Products Fuel / Engine Model JD - 3 Engine serial # 275484 -> 179602 -> Page JD219-3 JD164-3 JD164-4 JD179-1 JD100-1 JD4045-3 JD100-1 179602 -> JD164-3 JD179-1 JD179-1 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model JD350B JD350B JD350B JD350B JD350B JD350B Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer 355D Crawler Dozer D 179D JD179-1 360D Skidder Turbo high HP D 6.8 PT JD6068-3 360DC Skidder Turbo high HP D 6.8 PT JD6068-3 360DG Skidder Turbo high HP D 6.8 PT JD6068-3 370 Excavator 8.1T PT D 6081 / 8.1 PT JD6081-1 370C Excavator 8.1T PT D 6081 / 8.1 PT JD6081-1 JD380 JD380 JD380 Forklift Forklift Forklift 400G Crawler Dozer JD400 JD400 JD400 Loader Backhoe Loader Backhoe Loader Backhoe 401A 401A 401A G D D D D D 135 / 2.2L 152 Early 152 Late 164 Early 1 164 Early 2 164 Late G 135 / 2.2L D 152 Early D 152 Late Engine serial # -> 154765 154766 -> -> 179601 -> 179601 179602 -> -> 154765 154766 -> D 239D Industrial Tractor Page JD135-2 JD152-1 JD152-2 JD164-1 JD164-2 JD164-3 JD135-2 JD152-1 JD152-2 JD239-1 G 180 / 3.0L D 202 Early D 202 Late -> 158257 158258 -> JD180-1 JD202-1 JD202-2 Loader Backhoe Loader Backhoe Loader Backhoe D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 401B Loader Backhoe D 219 Late 275484 -> JD219-3 401C Loader Backhoe D 219 Late 275484 -> JD219-3 401D Loader Backhoe D 219 Late 275484 -> JD219-3 JD401 JD401 Loader Backhoe Loader Backhoe D 202 Early D 202 Late -> 158257 158258 -> JD202-1 JD202-2 410 410 410 410 Loader Backhoe Loader Backhoe Loader Backhoe Loader Backhoe 202 / 3.3L 219 Early 1 219 Early 2 219 Late -> 275483 -> 275483 275484 -> JD202-3 JD219-1 JD219-2 JD219-3 410B 410B Loader Backhoe Loader Backhoe D 219 Early 2 D 219 Late -> 275483 275484 -> JD219-2 JD219-3 410C 410C Loader Backhoe Loader Backhoe D 276D Big pin D 276T 410D 410D Loader Backhoe Loader Backhoe D 4045D D 4045T JD4045-1 JD4045-2 410E Loader Backhoe Turbo D 4.5 PT JD4045-3 410G Loader Backhoe Turbo D 4.5 PT JD4045-3 415 Loader Backhoe European D 239D JD239-1 415B Loader Backhoe D 239D JD239-1 420 Tractor 2 CYL G 113 / 1.9L JD113-1 430 Tractor 2 CYL G 113 / 1.9L JD113-1 430B Log Loader 6.8PT T high HP, trailer mtd D 6.8 PT JD6068-3 435 Log Loader 6.8PT T high HP, trailer mtd D 6.8 PT JD6068-3 440C 440C Skidder Skidder D 276D Big pin D 276T JD276-2 JD276-3 440D Skidder D 276T JD276-3 SN -> 192,000 Endurance Power Products G D D D JD - 4 JD276-2 JD276-3 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model JD440 Skidder G 180 / 3.0L JD440 JD440 Skidder Skidder Dubuque sn -> 49999; Welland sn -> 19999 Dubuque machine s/n -> 44,999 Welland machine s/n -> 19,999 JD440A JD440A JD440A JD440A Skidder Skidder Skidder Skidder Dubuque machine s/n 50,000 - 103,129 Welland machine s/n 20,000 - 21,152 Welland machine s/n 21,153 - 21,299 Dubuque machine s/n 103,130 - 119,500 D D D D JD440B JD440B JD440B JD440B Skidder Skidder Skidder Skidder Welland machine s/n 21,300 -> Dubuque machine s/n 119,501 -> Welland machine s/n 21,300 -> Dubuque machine s/n 119,501 -> D D D D 444C Loader 444CH D 202 Early D 202 Early Engine serial # Page JD180-1 -> 158257 -> 158257 JD202-1 JD202-1 219 Early 1 219 Early 1 219 Early 2 219 Early 2 -> 275483 -> 275483 -> 275483 -> 275483 JD219-1 JD219-1 JD219-2 JD219-2 219 Early 2 219 Early 2 219 Late 219 Late -> 275483 -> 275483 275484 -> 275484 -> JD219-2 JD219-2 JD219-3 JD219-3 D 329 Late 277549 -> JD329-3 Loader D 329 Late 277549 -> JD329-3 444D 444D 444D 444D 444D Loader Loader Loader Loader Loader D D D D D -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 JD359-1 JD359-2 444E Loader D 276T JD276-3 444G Loader D 4045T JD4045-2 444H Loader Turbo high HP D 4.5 PT JD4045-3 444H-LL Log Loader Turbo high HP D 4.5 PT JD4045-3 JD444 JD444 Loader Loader European D 329 Late D 359D 448D Skidder 450 450 450 Crawler Dozer Crawler Dozer Crawler Dozer 450C Crawler Dozer 450D Crawler Dozer 450E 450E Crawler Dozer Crawler Dozer D 276D Big pin D 276T 450G 450G 450G 450G 450G 450G Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer machine s/n ->299,999 machine s/n ->299,999 machine sn -> 299,999 Machine sn 742,459 -> ; Turbo high HP D D D D D D 450H Crawler Dozer Natural & Turbo D 4.5 PT JD4045-3 450LC 450LC Excavator Excavator esn 500000 -> Powertech D 6101 / 10.1L D 6125 / 12.5 PT JD6101-1 JD6125-1 JD450 JD450 JD450 Crawler Dozer Crawler Dozer Crawler Dozer G 180 / 3.0L D 202 Early D 202 Late -> 158257 158258 -> JD180-1 JD202-1 JD202-2 JD450A JD450A JD450A Crawler Dozer Crawler Dozer Crawler Dozer D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 JD450B JD450B JD450B Crawler Dozer Crawler Dozer Crawler Dozer D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 329 Early 1 329 Early 2 329 Late 359D 359T 277549 -> D 276T European European European Endurance Power Products D 219 Early 1 D 219 Early 2 D 219 Late JD329-3 JD359-1 JD276-3 -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 D 219 Late 275484 -> JD219-3 D 219 Late 275484 -> JD219-3 JD - 5 JD276-2 JD276-3 276D Small pin 276D Big pin 276T 4045D 4045T 4.5 PT JD276-1 JD276-2 JD276-3 JD4045-1 JD4045-2 JD4045-3 (800) 467-5545 John Deere Applications Machine Type Machine note 455D 455D 455D Crawler Loader Crawler Loader Crawler Loader D 219 Early 1 D 219 Early 2 D 219 Late 455E 455E Crawler Loader Crawler Loader D 276D Big pin D 276T 455G 455G 455G 455G 455G Crawler Loader Crawler Loader Crawler Loader Crawler Loader Crawler Loader D D D D D JD455B JD455B JD455B Crawler Loader Crawler Loader Crawler Loader D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 JD455C JD455C JD455C Crawler Loader Crawler Loader Crawler Loader D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 460D Skidder Turbo high HP D 6.8 PT 460DC Skidder Turbo high HP D 6.8 PT 480C Forklift D 219 Late 275484 -> JD219-3 JD480 JD480 JD480 Forklift Forklift Forklift G 180 / 3.0L D 202 Early D 202 Late -> 158257 158258 -> JD180-1 JD202-1 JD202-2 JD480A JD480A Forklift Forklift D 219 Early 1 D 219 Early 2 -> 275483 -> 275483 JD219-1 JD219-2 JD480B Forklift D 219 Late 275484 -> JD219-3 482 482 482 482 482 Cotton Stripper Cotton Stripper Cotton Stripper Cotton Stripper Cotton Stripper D D D D G -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 JD239-1 JD329-4 482C Forklift D 239D 484 484 484 484 Cotton Stripper Cotton Stripper Cotton Stripper Cotton Stripper D D D D 485E Forklift Natural D 4.5 PT JD4045-3 486E Forklift Natural D 4.5 PT JD4045-3 488E Forklift Natural D 4.5 PT JD4045-3 490 490 Excavator Excavator D 239D D 239T JD239-1 JD239-2 490D 490D Excavator Excavator D 276D Small pin D 276D Big pin JD276-1 JD276-2 490E Excavator D 4045T 493D Excavator D 276D Big pin JD276-2 495D Excavator D 276T JD276-3 Endurance Power Products Fuel / Engine Model JD - 6 Engine serial # -> 275483 -> 275483 275484 -> 329 Early 1 329 Early 2 329 Late 359D JD219-1 JD219-2 JD219-3 JD276-2 JD276-3 276D Small pin 276D Big pin 276T 4045D 4045T 219 Early 1 219 Early 2 219 Late 239D 329 / 5.4L Page JD276-1 JD276-2 JD276-3 JD4045-1 JD4045-2 JD6068-3 JD6068-3 JD239-1 -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 JD359-1 JD4045-2 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model 499 499 499 499 499 499 499 499 Cotton Picker Cotton Picker Cotton Picker Cotton Picker Cotton Picker Cotton Picker Cotton Picker Cotton Picker D D D G D D D G 500C Loader Backhoe D 270 Late 280000 -> JD270-3 JD500 JD500 JD500 Loader Backhoe Loader Backhoe Loader Backhoe D 270 Early D 270 Repl D 270 Late -> 280000 -> 280000 280000 -> JD270-1 JD270-2 JD270-3 JD500A JD500A Loader Backhoe Loader Backhoe D 270 Early D 270 Repl -> 280000 -> 280000 JD270-1 JD270-2 JD500B Loader Backhoe D 270 Late 280000 -> JD270-3 510 Loader Backhoe D 270 Late 280000 -> JD270-3 510B Loader Backhoe D 276D Big pin JD276-2 510C Loader Backhoe D 276T JD276-3 510D Loader Backhoe D 4045T JD4045-2 515B 515B Loader Backhoe Loader Backhoe D 239D D 239T JD239-1 JD239-2 520 Tractor G 190 / 3.1L JD190-1 530 Tractor G 190 / 3.1L JD190-1 530B Log Loader 8.1A PT D 6081 / 8.1 PT JD530 JD530 JD530 Loader Backhoe Loader Backhoe Loader Backhoe European European European D 219 Early 1 D 219 Early 2 D 219 Late 540B Skidder 540D Skidder D 276T JD276-3 540E 540E Skidder Skidder machine s/n -> 538,845 machine s/n 538,846 -> D 4045T D 6059T JD4045-2 JD6059-2 540G 540G Skidder Skidder machine s/n -> 701,059 machine s/n 701,060 -> ; Turbo high HP D 6059T D 6.8 PT JD6059-2 JD6068-3 540G2 Skidder Turbo high HP D 6.8 PT JD6068-3 540G3 Skidder Turbo high HP D 6.8 PT JD6068-3 JD540 JD540 Skidder Skidder D 303 Early D 303 Late -> 158795 158796 -> JD303-1 JD303-2 JD540A JD540A JD540A Skidder Skidder Skidder D 329 Early 1 D 329 Early 2 D 329 Late -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 544C Loader D 414T JD414-2 544D Loader D 414T JD414-2 544DH Loader D 414T JD414-2 544E 544E Loader Loader D 359T D 6059T JD359-2 JD6059-2 544EH Loader D 6059T JD6059-2 544ELL Loader D 359T JD359-2 544ER Loader D 6059T JD6059-2 544ETC Tool Carrier D 359T JD359-2 219 Early 1 219 Early 2 219 Late 219 / 3.6L 329 Early 1 329 Early 2 329 Late 329 / 5.4L Engine serial # -> 275483 -> 275483 275484 -> -> 277548 -> 277548 277549 -> Endurance Power Products JD - 7 JD219-1 JD219-2 JD219-3 JD219-4 JD329-1 JD329-2 JD329-3 JD329-4 JD6081-1 -> 275483 -> 275483 275484 -> D 276T machine s/n -> 299,000 machine s/n 300,000 -> Page JD219-1 JD219-2 JD219-3 JD276-3 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model Engine serial # Page 544G Loader D 6059T JD6059-2 544GH Loader D 6059T JD6059-2 544GLL Log Loader D 6059T JD6059-2 544GTC Tool Carrier D 6059T JD6059-2 544H Loader Turbo high HP D 6.8 PT JD6068-3 544HLL Loader Turbo high HP D 6.8 PT JD6068-3 JD544 JD544 JD544 JD544 JD544 JD544 Loader Loader Loader Loader Loader Loader European European European D D G D D D JD544A JD544A JD544A 303 Early 303 Late 303 / 5.0L 329 Early 1 329 Early 2 329 Late -> 158795 158796 -> -> 277548 -> 277548 277549 -> JD303-1 JD303-2 JD303-3 JD329-1 JD329-2 JD329-3 Loader Loader Loader D 329 Early 1 D 329 Early 2 D 329 Late -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 JD544B JD544B Loader Loader D 414D D 414T JD414-1 JD414-2 548D Skidder D 276T JD276-3 548E 548E Skidder Skidder machine s/n -> 538,545 machine s/n 538,546 -> D 4045T D 6059T JD4045-2 JD6059-2 548G 548G Skidder Skidder machine s/n -> 701,059 machine s/n 701,060 -> ;Turbo high HP D 6059T D 6.8 PT JD6059-2 JD6068-3 548G2 Skidder Turbo high HP D 6.8 PT JD6068-3 548G3 Skidder Turbo high HP D 6.8 PT JD6068-3 550 Crawler Dozer D 276T JD276-3 550A Crawler Dozer D 276T JD276-3 550B Crawler Dozer D 276T JD276-3 550G 550G 550G Crawler Dozer Crawler Dozer Crawler Dozer D 276T D 4045T D 4.5 PT JD276-3 JD4045-2 JD4045-3 550GTC Crawler Dozer D 4045T JD4045-2 550H Crawler Dozer D 4.5 PT JD4045-3 555 Crawler Loader D 276T JD276-3 555A Crawler Loader D 276T JD276-3 555B Crawler Loader D 276T JD276-3 555G 555G 555G Crawler Loader Crawler Loader Crawler Loader D 276T D 4045T D 4.5 PT JD276-3 JD4045-2 JD4045-3 555GTC Crawler Loader D 4045T JD4045-2 JD555 Crawler Loader EUROPEAN D 239T JD239-2 560D Skidder 8.1T PT D 6081 / 8.1 PT JD6081-1 560DC Skidder 8.1T PT D 6081 / 8.1 PT JD6081-1 560DG Skidder 8.1T PT D 6081 / 8.1 PT JD6081-1 570A 570A 570A Motor Grader Motor Grader Motor Grader D 329 Early 1 D 329 Early 2 D 329 Late 570B 570B Motor Grader Motor Grader D 359D D 359T machine sn -> 299,999 machine sn 300,000 - 742,459 machine sn 742,460 ->; Turbo high HP Turbo machine sn -> 299,999 machine sn 300,000 - 742,459 machine sn 742,460 -> ; Turbo high HP Endurance Power Products JD - 8 -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 JD359-1 JD359-2 (800) 467-5545 John Deere Applications Machine Type Machine note JD570 JD570 JD570 JD570 JD570 Motor Grader Motor Grader Motor Grader Motor Grader Motor Grader D D D D D 590D 590D Excavator Excavator D 276T D 4045T JD276-3 JD4045-2 595 Excavator D 276T JD276-3 595D 595D Excavator Excavator D 276T D 4045T JD276-3 JD4045-2 600 600 600 600 High Cycle High Cycle High Cycle High Cycle 600A 600A 600A HiCycle sprayer HiCycle sprayer HiCycle sprayer HiCycle sprayer Fuel / Engine Model 303 Early 303 Late 329 Early 1 329 Early 2 329 Late Engine serial # -> 158795 158796 -> -> 277548 -> 277548 277549 -> Page JD303-1 JD303-2 JD329-1 JD329-2 JD329-3 135 / 2.2L 219 Early 1 219 Early 2 219 Late -> 275483 -> 275483 275484 -> JD135-2 JD219-1 JD219-2 JD219-3 High Cycle High Cycle High Cycle D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 JD600 Loader Backhoe D 404D Late 335846 -> JD404-4 608B Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 608L Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 608S Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 610B Loader Backhoe D 276T JD276-3 610C Loader Backhoe D 276T JD276-3 620 Tractor G 303 / 5.0L JD303-4 624E 624E Loader Loader 624EH 624G machine s/n -> 299,000 machine s/n 300,000 -> G D D D D 414T D 6068T JD414-2 JD6068-2 Loader D 6068T JD6068-2 Loader D 6068T JD6068-2 624GH Loader D 6068T JD6068-2 624H Loader 6.8H Powertech D 6.8 PT JD6068-3 624HLL Loader 6.8H Powertech D 6.8 PT JD6068-3 630 Tractor G 303 / 5.0L JD303-4 640 Skidder D 414T JD414-2 640D 640D Skidder Skidder D 414T D 6068T JD414-2 JD6068-2 640E Skidder D 6068T JD6068-2 640G Skidder Turbo high HP D 6.8 PT JD6068-3 640G2 Skidder 6.8T PT high HP D 6.8 PT JD6068-3 640G3 Skidder 6.8T PT high HP D 6.8 PT JD6068-3 643 Feller Buncher D 414T JD414-2 643D Feller Buncher D 414T JD414-2 643G Feller Buncher Turbo high HP D 6.8 PT JD6068-3 643H Feller Buncher 6.8T PT high HP D 6.8 PT 644C 644C Loader Loader 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 644D 644D Loader Loader 6-466T 6-466T D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 644E Loader 6076T D 6076 T/A/H Endurance Power Products JD - 9 JD6068-3 JD6076-1 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model 644EH Loader 6076A D 6076 T/A/H JD6076-1 644ER Loader 6076A D 6076 T/A/H JD6076-1 644G 644G Loader Loader 6076T 8.1A PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 644H Loader 8.1T PT D 6081 / 8.1 PT JD6081-1 644J Loader 8.1T PT D 6081 / 8.1 PT JD6081-1 JD644 Loader D 404T/A Early -> 335845 JD404-5 JD644A Loader D 404T/A Early -> 335845 JD404-5 JD644B Loader D 531T 646C Compactor JD646 Compactor JD646B JD646B Compactor Compactor 648D 648D Skidder Skidder 648E Skidder 648G Skidder 648G2 650G 650G 650G 650G 650G 650G 6-466A D 466T/A Late Engine serial # Page JD531-3 T 253373 ->; A 67685 -> JD466-3 D 404T/A Early -> 335845 JD404-5 D 404T/A Early D 531T -> 335845 JD404-5 JD531-3 D 414T D 6068T JD414-2 JD6068-2 D 6068T JD6068-2 Turbo high HP D 6.8 PT JD6068-3 Skidder Turbo high HP D 6.8 PT JD6068-3 Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer Crawler Dozer machine sn -> 299,999 machine sn -> 299,999 machine sn -> 299,999 machine sn 300,000 - 742,459 machine sn 300,000 - 742,459 machine sn 742,460 -> ; Turbo high HP D D D D D D 650GTC Crawler Dozer Turbo high HP D 4.5 PT JD4045-3 650H Crawler Dozer Turbo D 4.5 PT JD4045-3 650U Crawler Dozer Turbo D 4.5 PT JD4045-3 653 Feller Buncher D 6068T JD6068-2 653E Feller Buncher Turbo high HP D 6.8 PT JD6068-3 653G Feller Buncher Turbo high HP D 6.8 PT JD6068-3 655 Crawler Loader D 414T JD414-2 655B Crawler Loader D 414T JD414-2 660D Skidder 670A Motor Grader D 414T JD414-2 670B Motor Grader D 414T JD414-2 670C Motor Grader Turbo high HP D 6.8 PT JD6068-3 670CH Motor Grader Turbo high HP D 6.8 PT JD6068-3 JD670 Motor Grader D 414T JD414-2 672A Motor Grader D 414T JD414-2 672B Motor Grader D 414T JD414-2 672CH Motor Grader D 6.8 PT JD6068-3 690B Excavator 690C Excavator 690CR Excavator 690D Excavator D 414T JD414-2 690DR Excavator D 414T JD414-2 machine sn 200,455 -> 8.1A PT Turbo high HP 276D Small pin 276D Big pin 276T 4045D 4045T 4.5 PT JD276-1 JD276-2 JD276-3 JD4045-1 JD4045-2 JD4045-3 D 6081 / 8.1 PT JD6081-1 D 404T/A Late 335846 -> JD404-6 6-466T D 466T/A Late T 253373 ->; A 67685 -> JD466-3 6-466T D 466T/A Late T 253373 ->; A 67685 -> JD466-3 Endurance Power Products JD - 10 (800) 467-5545 John Deere Applications Machine Type Machine note 690E 690E Excavator Excavator Turbo high HP D 6068T D 6.8 PT JD6068-2 JD6068-3 690ELC 690ELC Excavator Excavator Turbo high HP D 6068T D 6.8 PT JD6068-2 JD6068-3 JD690 Excavator D 404T/A Early -> 335845 JD404-5 JD690A Excavator D 404T/A Early -> 335845 JD404-5 693B Excavator D 404T/A Late 335846 -> JD404-6 693C Feller Buncher D 466T/A Late T 253373 ->; A 67685 -> JD466-3 693D Feller Buncher D 414T 699 699 699 699 699 Cotton Picker Cotton Picker Cotton Picker Cotton Picker Cotton Picker G D D D G 700 High Cycle HiCycle sprayer G 135 / 2.2L JD135-2 700A Loader Backhoe Late s/n machine D 531D Late JD531-2 700H Crawler Dozer Turbo D 4.5 PT JD700 Loader Backhoe Early s/n machine D 531D Early 710B 710B 710B 710B Loader Backhoe Loader Backhoe Loader Backhoe Loader Backhoe D D D D 710C Loader Backhoe D 359T JD359-2 710D 710D Loader Backhoe Loader Backhoe D 6059T D 6.8 PT JD6059-2 JD6068-3 720 720 Tractor Tractor 742J Loader 730 730 Tractor Tractor 734 734 734 High Cycle High Cycle High Cycle HiCycle sprayer HiCycle sprayer HiCycle sprayer G 135 / 2.2L D 152 Early D 152 Late 740G 740G Skidder Skidder 6076T 8.1T PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 740H Feller Buncher 6.8T PT high HP D 6.8 PT JD6068-3 JD740 Skidder D 404T/A Late 335846 -> JD404-6 JD740A JD740A Skidder Skidder 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 JD740E Skidder 6076T D 6076 T/A/H 743A 743A Tree Harvester Tree Harvester 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 JD743 JD743 Feller Buncher Feller Buncher 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 744E Loader 744H Loader 744MH 748E 6-466T Turbo high HP Fuel / Engine Model 303 / 5.0L 329 Early 1 329 Early 2 329 Late 329 / 5.4L 329 Early 1 329 Early 2 329 Late 359T Engine serial # JD414-2 -> 277548 -> 277548 277549 -> JD303-3 JD329-1 JD329-2 JD329-3 JD329-4 JD4045-3 JD531-1 -> 277548 -> 277548 277549 -> G 362 / 5.9L D 378 / 6.2L 8.1T PT Page JD329-1 JD329-2 JD329-3 JD359-2 JD362-2 JD378-1 D 6081 / 8.1 PT JD6081-1 G 362 / 5.9L D 378 / 6.2L JD362-2 JD378-1 -> 154765 154766 -> JD135-2 JD152-1 JD152-2 JD6076-1 D 6101 / 10.1L JD6101-1 Powertech D 6125 / 12.5 PT JD6125-1 Loader Powertech D 6125 / 12.5 PT JD6125-1 Skidder 6076T D 6076 T/A/H JD6076-1 Endurance Power Products JD - 11 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model 748G 748G Skidder Skidder 6076T 8.1T PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 748G2 Skidder 8.1T PT D 6081 / 8.1 PT JD6081-1 748G3 Skidder 8.1T PT D 6081 / 8.1 PT JD6081-1 750 Crawler Dozer D 414T JD414-2 750B Crawler Dozer D 414T JD414-2 750BLT Crawler Dozer D 414T JD414-2 750C 750C Crawler Dozer Crawler Dozer Turbo high HP D 6068T D 6.8 PT JD6068-2 JD6068-3 750C2 Crawler Dozer Turbo high HP D 6.8 PT JD6068-3 753G Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 753GL Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 755A Crawler Loader D 414T JD414-2 755B Crawler Loader D 414T JD414-2 755BH Crawler Loader D 414T JD414-2 JD755 Crawler Loader D 414T JD414-2 760 Scraper D 531D Late JD531-2 760A Scraper D 531D Late JD531-2 762A 762A Scraper Scraper 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 762B 762B Scraper Scraper 6-466A 8.1A PT D 466T/A Late D 6081 / 8.1 PT T 253373 ->; A 67685 -> JD466-3 JD6081-1 JD762 JD762 JD762 Scraper Scraper Scraper -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 770 Motor Grader 770A 770A Motor Grader Motor Grader 6-466A D 466T/A Late D 531T T 253373 ->; A 67685 -> JD466-3 JD531-3 770AH 770AH Motor Grader Motor Grader 6-466T,A 6-466T,A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 770B 770B 770B Motor Grader Motor Grader Motor Grader 6-466T,A 6-466T,A 6076T D 466T/A Early D 466T/A Late D 6076 T/A/H T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 JD6076-1 770BH 770BH 770BH Motor Grader Motor Grader Motor Grader 6-466T 6-466T 6076A D 466T/A Early D 466T/A Late D 6076 T/A/H T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 JD6076-1 770C Motor Grader 8.1H PT D 6081 / 8.1 PT 770CH Motor Grader 8.1H PT D 6081 / 8.1 PT 772A 772A Motor Grader Motor Grader 6-466A D 466T/A Late D 531T T 253373 ->; A 67685 -> JD466-3 JD531-3 772B 772B Motor Grader Motor Grader 6-466T,A 6076T D 466T/A Late D 6076 T/A/H T 253373 ->; A 67685 -> JD466-3 JD6076-1 772BH 772BH 772BH Motor Grader Motor Grader Motor Grader 6-466A 6-466A 6076A D 466T/A Early D 466T/A Late D 6076 T/A/H T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 JD6076-1 772CH Motor Grader 8.1H PT D 6081 / 8.1 PT 790 Excavator 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 790D Excavator 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 D 619 Early D 619 Mid D 619 Late Engine serial # D 531T Endurance Power Products JD - 12 Page JD531-3 JD6081-1 JD6081-1 JD6081-1 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model Engine serial # 790E Excavator 790ELC Excavator 792 Excavator 6-466A D 466T/A Late 792DLC Excavator 6076T D 6076 T/A/H 793D Excavator 6-466A D 466T/A Late 820 820 Tractor Tractor D 152 Early D 152 Late 830 830 830 830 830 Tractor Tractor Tractor Tractor Tractor D D D D D 840 Tractor D 179D JD179-1 840H Feller Buncher 6.8T PT high HP D 6.8 PT JD6068-3 843G Skidder Turbo high HP; Feller buncher D 6.8 PT JD6068-3 843H Feller Buncher 6.8T PT high HP D 6.8 PT JD6068-3 844 Loader esn 500,000 -> D 6101 / 10.1L JD6101-1 848G Skidder 8.1A PT D 6081 / 8.1 PT JD6081-1 850 850 850 850 Feller Buncher Crawler Dozer Crawler Dozer Crawler Dozer 8.1T PT D D D D 850B Crawler Dozer 6-466A D 466T/A Late 850C 850C Crawler Dozer Crawler Dozer 6076T 8.1A PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 850C2 Crawler Dozer 8.1A PT D 6081 / 8.1 PT JD6081-1 853G Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 855 855 855 Crawler Loader Crawler Loader Crawler Loader D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 JD860 JD860 JD860 Scraper Scraper Scraper D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 JD860A JD860A JD860A Scraper Scraper Scraper D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 JD860B JD860B JD860B Scraper Scraper Scraper D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 862 862 862 Scraper Scraper Scraper D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 862B 862B Scraper Scraper 49060 -> JD6101-1 JD619-3 880 Windrower G 135 / 2.2L 890 Excavator D 619 Late 49060 -> JD619-3 890A Excavator D 619 Late 49060 -> JD619-3 892DLC Excavator 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 892ELC Excavator 6076A D 6076 T/A/H D 6068T JD6068-2 D 6068T esn 500000 -> Endurance Power Products 152 Early 152 Late 164 Early 1 164 Early 2 164 Late 6081 / 8.1 PT 619 Early 619 Mid 619 Late D 6101 / 10.1L D 619 Late JD - 13 Page JD6068-2 T 253373 ->; A 67685 -> JD466-3 JD6076-1 T 253373 ->; A 67685 -> JD466-3 -> 154765 154766 -> JD152-1 JD152-2 -> 154765 154766 -> -> 179601 -> 179601 179602 -> JD152-1 JD152-2 JD164-1 JD164-2 JD164-3 -> 33814 33815 - 49059 49060 -> T 253373 ->; A 67685 -> JD6081-1 JD619-1 JD619-2 JD619-3 JD466-3 JD135-2 JD6076-1 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model 900 Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 903G Feller Buncher 8.1T PT D 6081 / 8.1 PT JD6081-1 920 920 Tractor Tractor 925 Combine 930 930 930 930 930 930 D 152 Early D 152 Late European D 179D Tractor Tractor Tractor Tractor Tractor Tractor 932 932 932 Engine serial # -> 154765 154766 -> Page JD152-1 JD152-2 JD179-1 EUROPEAN EUROPEAN EUROPEAN D D D D D D 164 Early 1 164 Early 2 164 Late 219 Early 1 219 Early 2 219 Late -> 179601 -> 179601 179602 -> -> 275483 -> 275483 275484 -> JD164-1 JD164-2 JD164-3 JD219-1 JD219-2 JD219-3 Tractor Tractor Tractor EUROPEAN EUROPEAN EUROPEAN D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 932 Combine European D 179D 935 935 935 935 935 Tractor Tractor Tractor Tractor Combine EUROPEAN EUROPEAN EUROPEAN EUROPEAN European D D D D D 940 940 Tractor Tractor EUROPEAN D 179D D 239D JD179-1 JD239-1 942 942 Tractor Combine EUROPEAN European D 239D D 239D JD239-1 JD239-1 945 Tractor EUROPEAN D 239T JD239-2 9450 Combine European D 239T JD239-2 950 950 950 950 Tractor Tractor Tractor Feller Buncher EUROPEAN EUROPEAN EUROPEAN 8.1T PT D D D D 952 952 Tractor Combine EUROPEAN European D 239T D 239T 953G Feller Buncher 8.1T PT D 6081 / 8.1 PT 955 955 955 955 Tractor Tractor Tractor Tractor EUROPEAN EUROPEAN EUROPEAN EUROPEAN D D D D 965 Combine European D 359T JD359-2 965H Combine European D 359T JD359-2 968H Combine European D 359T JD359-2 975 Combine European D 359T JD359-2 985 Combine European D 359T 990 Excavator D 6101 / 10.1L 992D Excavator D 619 Late 49060 -> JD619-3 992DLC Excavator D 619 Late 49060 -> JD619-3 992E Excavator esn -> 499999 D 6101 / 10.1L JD6101-1 992ELC Excavator esn 500000 -> D 6101 / 10.1L JD6101-1 Endurance Power Products 219 Early 1 219 Early 2 219 Late 239D 239D 329 Early 1 329 Early 2 329 Late 6081 / 8.1 PT 329 Early 1 329 Early 2 329 Late 359D JD - 14 JD179-1 -> 275483 -> 275483 275484 -> -> 277548 -> 277548 277549 -> JD219-1 JD219-2 JD219-3 JD239-1 JD239-1 JD329-1 JD329-2 JD329-3 JD6081-1 JD239-2 JD239-2 JD6081-1 -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 JD359-1 JD359-2 JD6101-1 (800) 467-5545 John Deere Applications Machine Type Machine note 1010 1010 1010 1010 Tractor Crawler Dozer Tractor Crawler Dozer G G D D 115 / 1.9L 115 / 1.9L 145 / 2.4L 145 / 2.4L 1020 1020 1020 1020 Tractor Tractor Tractor Tractor 135 / 2.2L 152 Early 152 Late 179D -> 154765 154766 -> EUROPEAN G D D D JD135-2 JD152-1 JD152-2 JD179-1 1030 1030 1030 1030 1030 Tractor Tractor Tractor Tractor Tractor EUROPEAN EUROPEAN EUROPEAN D D D D D 152 Early 152 Late 164 Early 1 164 Early 2 164 Late -> 154765 154766 -> -> 179601 -> 179601 179602 -> JD152-1 JD152-2 JD164-1 JD164-2 JD164-3 1032 Combine D 239D JD239-1 1040 Tractor D 179D JD179-1 1042 Combine D 239D JD239-1 1052 Combine D 239T JD239-2 1055 Combine D 359D JD359-1 1065 Combine D 359T JD359-2 1068H Combine D 359T JD359-2 1072 Combine D 359T JD359-2 1075 Combine D 359T JD359-2 1085 Combine D 359T JD359-2 1120 1120 1120 Tractor Tractor Tractor D 164 Early 1 D 164 Early 2 D 164 Late -> 179601 -> 179601 179602 -> JD164-1 JD164-2 JD164-3 1130 1130 1130 Tractor Tractor Tractor D 164 Early 1 D 164 Early 2 D 164 Late -> 179601 -> 179601 179602 -> JD164-1 JD164-2 JD164-3 1133 Combine 1140 Tractor 1144 Combine European 1155 Combine 1157 European Fuel / Engine Model Engine serial # Page JD115-1 JD115-1 JD145-1 JD145-1 D 239D JD239-1 D 179D JD179-1 D 239D JD239-1 European D 239T JD239-2 Combine European D 359D JD359-1 1158 Combine European D 359T JD359-2 1165 Combine 6.8T PT high HP D 6.8 PT JD6068-3 1166 Combine D 359T JD359-2 1169 Combine D 359T JD359-2 1170 Combine D 6.8 PT JD6068-3 1174 Combine D 359T JD359-2 1175 Combine 6.8T PT high HP D 6.8 PT JD6068-3 1175H Combine 6.8T PT high HP D 6.8 PT JD6068-3 1177 1177 Combine Combine 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 1188 1188 Combine Combine 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 1350 Tractor 1445 Tractor 6.8T PT high HP EUROPEAN Endurance Power Products D 179D JD179-1 D 179D JD179-1 JD - 15 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model 1445F Tractor European D 179D 1520 1520 1520 1520 Tractor Tractor Tractor Tractor machine sn -> 160,309 machine sn 160,310 -> machine sn 160,310 -> D D D G 1530 1530 1530 Engine serial # Page JD179-1 164 Early 1 164 Early 2 164 Late 164 / 2.7L -> 179601 -> 179601 179602 -> JD164-1 JD164-2 JD164-3 JD164-4 Tractor Tractor Tractor D 164 Early 1 D 164 Early 2 D 164 Late -> 179601 -> 179601 179602 -> JD164-1 JD164-2 JD164-3 1550 Tractor D 179D JD179-1 1630 Tractor D 179D JD179-1 1640 Tractor D 239D JD239-1 1745 Tractor EUROPEAN D 179D JD179-1 1745F Tractor European D 179D JD179-1 1750 Tractor D 179D JD179-1 1750V Tractor D 179D JD179-1 1830 1830 1830 Tractor Tractor Tractor D 219 Early 1 D 219 Early 2 D 219 Late 1840 Tractor D 239D JD239-1 1845 Tractor EUROPEAN D 179D JD179-1 1845F Tractor European D 179D JD179-1 1850 Tractor D 179D JD179-1 1850F Tractor European D 179D JD179-1 1850N Tractor European D 179D JD179-1 1850V Tractor European D 179D JD179-1 1950 Tractor D 179T JD179-2 1950F Tractor European D 179T JD179-2 1950N Tractor European D 179T JD179-2 2010 2010 2010 2010 Tractor Crawler Dozer Tractor Crawler Dozer G G D D 2020 2020 2020 Tractor Tractor Tractor G 180 / 3.0L D 202 Early D 202 Late 2030 2030 2030 2030 Tractor Tractor Tractor Tractor D D D G 2040 2040 2040 Tractor Tractor Tractor machine s/n -> 349,000 machine s/n 350,000 -> EUROPEAN D 164 Late D 179D D 239D 2040S Tractor European D 239D JD239-1 2054 Combine European; 6068T D 6068T JD6068-2 2056 Combine European; 6076A D 6076 T/A/H JD6076-1 2058 Combine European; 6076A D 6076 T/A/H JD6076-1 2064 Combine European; 6076A D 6076 T/A/H JD6076-1 2066 Combine European; 6076A D 6076 T/A/H JD6076-1 European Endurance Power Products -> 275483 -> 275483 275484 -> 145 / 2.4L 145 / 2.4L 165 / 2.7L 165 / 2.7L 219 Early 1 219 Early 2 219 Late 219 / 3.6L JD - 16 JD219-1 JD219-2 JD219-3 JD145-2 JD145-2 JD165-1 JD165-1 -> 158257 158258 -> JD180-1 JD202-1 JD202-2 -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 JD219-4 179602 -> JD164-3 JD179-1 JD239-1 (800) 467-5545 John Deere Applications Machine Type 2120 2120 2120 Tractor Tractor Tractor 2130 2130 2130 Tractor Tractor Tractor 2140 2150 Machine note Fuel / Engine Model D 219 Early 1 D 219 Early 2 D 219 Late EUROPEAN Engine serial # -> 275483 -> 275483 275484 -> Page JD219-1 JD219-2 JD219-3 D 239D D 276D Big pin D 276T JD239-1 JD276-2 JD276-3 Tractor D 239T JD239-2 Tractor D 179D JD179-1 2155 Tractor D 179D JD179-1 2240 2240 Tractor Tractor D 179D D 239D JD179-1 JD239-1 2250 2250 2250 2250 Tractor Windrower Windrower Tractor EUROPEAN D D D D 2250F Tractor European D 239D JD239-1 2254 Combine European; 6068T D 6068T JD6068-2 2255 Tractor D 179D JD179-1 2256 Combine 8.1A PT D 6081 / 8.1 PT JD6081-1 2258 Combine 8.1A PT D 6081 / 8.1 PT JD6081-1 2266 Combine 8.1A PT D 6081 / 8.1 PT JD6081-1 2270 2270 2270 Windrower Windrower Windrower D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 2280 Windrower D 219 Late 275484 -> JD219-3 2320 2320 2320 Windrower Windrower Windrower D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 2345 Tractor D 179D JD179-1 2345F Tractor D 179D JD179-1 2350 Tractor D 239D JD239-1 2355 2355 2355 Tractor Tractor Tractor D 179D D 239D D 4039D JD179-1 JD239-1 JD4039-1 2355N Tractor D 179T JD179-2 2360 Windrower D 239D JD239-1 2380 Windrower D 239D JD239-1 2420 2420 2420 Windrower Windrower Windrower D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 2440 Windrower D 219 Late 275484 -> JD219-3 2450 Tractor 2450F Tractor 2510 2510 2510 2510 2510 2510 Tractor Tractor Tractor Tractor Tractor Tractor European EUROPEAN European Endurance Power Products 179D 219 Early 1 219 Early 2 239D -> 275483 -> 275483 JD179-1 JD219-1 JD219-2 JD239-1 D 239D JD239-1 D 239D JD239-1 G D D D D D 180 / 3.0L 202 Early 202 Late 219 Early 1 219 Early 2 219 Late JD - 17 -> 158257 158258 -> -> 275483 -> 275483 275484 -> JD180-1 JD202-1 JD202-2 JD219-1 JD219-2 JD219-3 (800) 467-5545 John Deere Applications Machine Type Machine note 2520 2520 2520 2520 Tractor Tractor Tractor Tractor G D D D 2550 Tractor D 239D JD239-1 2555 2555 Tractor Tractor D 239D D 239T JD239-1 JD239-2 2555CS 2555CS Tractor Tractor D 239D D 4039D JD239-1 JD4039-1 2630 2630 Windrower Tractor D 239D D 276D Small pin JD239-1 JD276-1 2640 Tractor D 276D Small pin JD276-1 2650 2650 Tractor Tractor D 239D D 239T JD239-1 JD239-2 2650F Tractor European D 239T JD239-2 2650N Tractor European D 239T JD239-2 2750 Tractor D 239T JD239-2 2755 Tractor D 239T 2840 Tractor D 329 Late 2850 2850 Tractor Tractor D 239D D 239T JD239-1 JD239-2 2855 2855 Tractor Tractor D 239D D 239T JD239-1 JD239-2 2855N 2855N Tractor Tractor D 239D D 239T JD239-1 JD239-2 2940 Tractor D 359D JD359-1 2950 Tractor D 359D JD359-1 2955 Tractor D 359D JD359-1 3010 3010 3010 Tractor Tractor Tractor G 201 / 3.3L D 270 Early D 270 Repl 3020 3020 3020 3020 3020 Tractor Tractor Tractor Tractor Tractor 3030 3030 3030 Tractor Tractor Tractor D 329 Early 1 D 329 Early 2 D 329 Late 3040 3040 Tractor Tractor D 359D D 359T JD359-1 JD359-2 3050 Tractor D 359D JD359-1 3055 Tractor D 359D JD359-1 3100 Tractor D 3029D JD3029-1 3110 Tractor D 359D JD359-1 3120 3120 Tractor Tractor D 329 Early 1 D 329 Early 2 -> 277548 -> 277548 JD329-1 JD329-2 3130 3130 3130 Tractor Tractor Tractor D 329 Early 1 D 329 Early 2 D 329 Late -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 machine sn -> 122999 machine sn 123000 -> machine s/n ->122,999 machine s/n ->122,999 machine s/n 123,000 -> European Endurance Power Products Fuel / Engine Model G G D D D 202 / 3.3L 219 Early 1 219 Early 2 219 Late 227 / 3.7L 241 / 4.2L 270 Early 270 Repl 270 Late JD - 18 Engine serial # -> 275483 -> 275483 275484 -> Page JD202-3 JD219-1 JD219-2 JD219-3 JD239-2 277549 -> JD329-3 -> 280000 -> 280000 JD201-1 JD270-1 JD270-2 -> 280000 -> 280000 280000 -> JD227-1 JD241-1 JD270-1 JD270-2 JD270-3 -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 (800) 467-5545 John Deere Applications Machine Type Machine note 3140 3140 Tractor Tractor D 359D D 359T JD359-1 JD359-2 3150 Tractor D 359D JD359-1 3155 Tractor D 359D JD359-1 3200 Tractor D 4039D JD4039-1 3210 Tractor D 359D JD359-1 3255 3255 Tractor Tractor D 359D D 359T JD359-1 JD359-2 3300 3300 3300 3300 Combine Combine Combine Tractor G D G D 3310 Tractor European; 4.5D PT D 4.5 PT JD4045-3 3310X Tractor European; 4.5D PT D 4.5 PT JD4045-3 3350 3350 Tractor Tractor D 359D D 359T JD359-1 JD359-2 3380 Windrower D 239D JD239-1 3400 Tractor D 4039T JD4039-2 3410 Tractor European, 4.5T PT D 4.5 PT JD4045-3 3410X Tractor European, 4.5T PT D 4.5 PT JD4045-3 3430 3430 3430 Windrower Windrower Windrower EARLY LATE D 239D D 239T D 4039T JD239-1 JD239-2 JD4039-2 535 Log Loader 8.1A PT; trailer mtd D 6081 / 8.1 PT JD6081-1 3640 Tractor D 359D JD359-1 3650 Tractor D 359T JD359-2 3800 Telescopic Handler 4.5T PT high HP D 4.5 PT JD4045-3 3830 3830 Windrower Windrower D 239T D 4039T JD239-2 JD4039-2 400 Tractor G 362 / 5.9L 4000 Tractor D 404D Mid 215000 - 335845 JD404-3 4010 4010 4010 Tractor Tractor Tractor G 301 / 4.9L D 404D Early D 404D Repl -> 214999 -> 214999 JD301-1 JD404-1 JD404-2 4020 4020 4020 4020 4020 Tractor Tractor Tractor Tractor Tractor 4030 4030 4030 4030 Tractor Tractor Tractor Tractor 4040 4040 Tractor Tractor European 4050 4050 Tractor Tractor machine s/n 6,593 -> machine s/n -> 6,592 D 359T D 466D 4050E Tractor 6-466T D 466T/A Late 4055 Tractor 6076T D 6076 T/A/H European EUROPEAN machine sn -> 200999 machine sn 201000 -> machine s/n -> 200,999 machine s/n -> 200,999 machine s/n 201,000-> Endurance Power Products Fuel / Engine Model 202 / 3.3L 219 Late 219 / 3.6L 4045D Engine serial # 275484 -> Page JD202-3 JD219-3 JD219-4 JD4045-1 JD362-1 G G D D D 341 / 5.6L 362 / 5.9L 404D Early 404D Repl 404D Mid -> 214999 -> 214999 215000 - 335845 JD341-1 JD362-1 JD404-1 JD404-2 JD404-3 G D D D 303 / 5.0L 329 Early 1 329 Early 2 329 Late -> 277548 -> 277548 277549 -> JD303-3 JD329-1 JD329-2 JD329-3 335846 -> JD359-1 JD404-4 D 359D D 404D Late JD - 19 JD359-2 JD466-1 T 253373 ->; A 67685 -> JD466-3 JD6076-1 (800) 467-5545 John Deere Applications Machine Type Machine note 4080 4080 4080 Tractor Tractor Tractor European European European 4230 Tractor 4235 Tractor 4240 Tractor 4250 Tractor 6-466T D 466T/A Late 4255 Tractor 6076T D 6076 T/A/H 4280 Tractor European D 359D 4320 Tractor 4350 4350 Tractor Tractor 4400 4400 4400 4400 Telescopic Handler European Combine Combine Combine 4420 4420 4420 4420 Mexico Fuel / Engine Model Engine serial # Page D 329 Early 1 D 329 Early 2 D 329 Late -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 D 404D Late 335846 -> JD404-4 D 466D JD466-1 D 466D JD466-1 T 253373 ->; A 67685 -> JD466-3 JD6076-1 JD359-1 D 404T/A Early -> 335845 JD404-5 D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 D D D D 239T 329 Early 1 329 Early 2 329 Late -> 277548 -> 277548 277549 -> JD239-2 JD329-1 JD329-2 JD329-3 Combine Combine Combine Combine D D D D 329 Early 1 329 Early 2 329 Late 359D 4425 Combine D 359D 4430 Tractor D 404T/A Late 4435 Combine D 359D 4440 Tractor 6-466T D 466T/A Early T -> 253372;A -> 67684 JD466-2 4450 Tractor 6-466T D 466T/A Late T 253373 ->; A 67685 -> JD466-3 4455 4455 4455 Tractor Tractor Tractor Mexico Mexico 6076T D 466T/A Early D 466T/A Late D 6076 T/A/H T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 JD6076-1 4485 4485 Tractor Tractor Mexico/Argentina, 6-466T Mexico/Argentina, 6-466T D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 4500 Telescopic Handler European D 239T 4520 Tractor D 404T/A Early 4555 Tractor 6076T D 6076 T/A/H JD6076-1 4560 Tractor 6076T D 6076 T/A/H JD6076-1 4620 Tractor D 404T/A Early -> 335845 JD404-5 4630 Tractor D 404T/A Late 335846 -> JD404-6 4640 Tractor 6-466A D 466T/A Early T -> 253372;A -> 67684 JD466-2 4650 Tractor 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 4685 4685 Tractor Tractor Mexico/Argentina, 6-466T Mexico/Argentina, 6-466T D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 4700 Sprayer Turbo high HP D 6.8 PT JD6068-3 4710 Sprayer 6.8T PT high HP D 6.8 PT JD6068-3 4730 Tractor Argentina D 466D JD466-1 4755 Tractor 6076A D 6076 T/A/H JD6076-1 4760 Tractor 6076A D 6076 T/A/H JD6076-1 4840 Tractor 6-466A D 466T/A Early T -> 253372;A -> 67684 JD466-2 4850 Tractor 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 Germany, 6-466T Germany, 6-466T Endurance Power Products JD - 20 -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 JD359-1 JD359-1 335846 -> JD404-6 JD359-1 JD239-2 -> 335845 JD404-5 (800) 467-5545 John Deere Applications Machine Type Machine note 4890 Windrower Turbo 4895 Fuel / Engine Model Engine serial # Page D 4.5 PT JD4045-3 Telescopic Handler 4.5T PT D 4.5 PT JD4045-3 4930 Tractor Argentina D 466D JD466-1 4955 Tractor 6076A Low Ring Piston D 6076 T/A/H JD6076-1 4960 Tractor 6076A Low Ring Piston D 6076 T/A/H JD6076-1 4990 Windrower Turbo, Std and high HP D 6.8 PT JD6068-3 4995 Windrower 6.8T PT high HP D 6.8 PT JD6068-3 5000 Tractor D 179D JD179-1 5010 Tractor D 531D Early JD531-1 5020 Tractor 5105 Tractor Natural D 2.9 PT 5200 5200 5200 5200 Tractor Forage Harvester Forage Harvester Forage Harvester Natural D D D D 5205 Tractor Natural D 2.9 PT JD3029-3 5210 Tractor Natural D 2.9 PT JD3029-3 5300 5300 Tractor Tractor Natural D 239D D 2.9 PT JD239-1 JD3029-3 5300N Tractor European D 239D JD239-1 5310 Tractor Turbo D 2.9 PT JD3029-3 5310N Tractor Turbo D 2.9 PT JD3029-3 5320N Tractor European, Turbo D 2.9 PT JD3029-3 5400 5400 5400 5400 Tractor Forage Harvester Forage Harvester Forage Harvester Turbo D D D D 5400N Tractor Turbo D 2.9 PT JD3029-3 5410 Tractor Natrual D 4.5 PT JD4045-3 5410N Tractor European, Turbo D 2.9 PT JD3029-3 5420 Forage Harvester European; 6-404A D 404T/A Late 5420N Tractor European; 4.5D PT D 4.5 PT 5440 5440 5440 5440 Forage Harvester Forage Harvester Forage Harvester Forage Harvester European, 6-466A European, 6-466A D D D D 5460 5460 5460 Forage Harvester Forage Harvester Forage Harvester D 619 Early D 619 Mid D 619 Late 5500 5500 5500 Tractor Tractor Tractor D 239T D 4039T D 4.5 PT JD239-2 JD4039-2 JD4045-3 5500N Tractor D 4039T JD4039-2 5510 Tractor Turbo D 4.5 PT JD4045-3 5510N Tractor Turbo D 4.5 PT JD4045-3 5520N Windrower European, 4.5T PT D 4.5 PT JD4045-3 5615 Tractor European; 4.5D PT D 4.5 PT JD4045-3 5715 Tractor 4.5T, PT D 4.5 PT JD4045-3 D 531D Late Endurance Power Products 2.9 PT 404T/A Early 404T/A Late 531A 2.9 PT 404T/A Early 404T/A Late 531A 404T/A Early 404T/A Late 466T/A Early 466T/A Late JD - 21 JD531-2 JD3029-3 -> 335845 335846 -> -> 335845 335846 -> 335846 -> JD3029-3 JD404-5 JD404-6 JD531-4 JD3029-3 JD404-5 JD404-6 JD531-4 JD404-6 JD4045-3 -> 335845 335846 -> T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD404-5 JD404-6 JD466-2 JD466-3 -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 (800) 467-5545 John Deere Applications Machine Type Machine note 5720 5720 Forage Harvester Forage Harvester 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 5730 Forage Harvester 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 5820 5820 5820 Forage Harvester Forage Harvester Forage Harvester D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 5830 Forage Harvester D 619 Late 49060 -> JD619-3 6000 6000 6000 6000 6000 6000 Sprayer Sprayer Sprayer High Cycle Sprayer Sprayer D D D D D D -> 275483 -> 275483 275484 -> 275484 -> JD219-1 JD219-2 JD219-3 JD219-3 JD239-1 JD4039-1 6010 Tractor Natural D 4.5 PT JD4045-3 SE6010 Tractor European; 4.5D PT D 4.5 PT JD4045-3 6020 Tractor European; 4.5D PT D 4.5 PT JD4045-3 SE6020 Tractor European; 4.5D PT D 4.5 PT JD4045-3 6030 6030 Tractor Tractor D 531D Late D 531A 6100 6100 6100 Sprayer Sprayer Tractor D 239T D 4039T D 4045D JD239-2 JD4039-2 JD4045-1 6110 Tractor Turbo high HP D 4.5 PT JD4045-3 6110L Tractor Turbo high HP D 4.5 PT JD4045-3 SE6110 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 6120 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 SE6120 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 6200 Tractor D 4039T JD4039-2 6200L Tractor D 4039T JD4039-2 6205 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 6210 Tractor Turbo high HP D 4.5 PT JD4045-3 6210L Tractor Turbo high HP D 4.5 PT JD4045-3 SE6210 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 6215 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 SE6220 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 6300 Tractor D 4039T JD4039-2 6300L Tractor D 4039T JD4039-2 6310 Tractor Turbo high HP D 4.5 PT JD4045-3 6310L Tractor Turbo high HP D 4.5 PT JD4045-3 6310S Tractor Turbo high HP D 4.5 PT JD4045-3 SE6310 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 6400 6400 Tractor Tractor D 4039T D 4045T JD4039-2 JD4045-2 6400L Tractor D 4045T JD4045-2 SE6400 Tractor European D 4045T JD4045-2 SE6410 Tractor European, 4.5T PT high HP D 4.5 PT JD4045-3 6403 Tractor Spain, 4.5T PT high HP D 4.5 PT JD4045-3 Endurance Power Products Fuel / Engine Model 219 Early 1 219 Early 2 219 Late 219 Late 239D 4039D JD - 22 Engine serial # Page JD531-2 JD531-4 (800) 467-5545 John Deere Applications Machine Type Machine note Fuel / Engine Model Engine serial # Page 6405 6405 Tractor Tractor 4.5T PT high HP Turbo high HP D 4.5 PT D 4.5 PT JD4045-3 JD4045-3 6410 Tractor Turbo high HP D 4.5 PT JD4045-3 6410L Tractor Turbo high HP D 4.5 PT JD4045-3 6410S Tractor Turbo high HP D 4.5 PT JD4045-3 6415 Tractor Mexico, 4.5T PT high HP D 4.5 PT JD4045-3 6500 6500 6500 Sprayer Sprayer Tractor D 239T D 4039T D 4039T JD239-2 JD4039-2 JD4039-2 6500L Tractor D 4045T JD4045-2 6505 Tractor European, 6.8D PT D 6.8 PT JD6068-3 6506 Tractor European D 6059T JD6059-2 6510 6510 Tractor Tractor Natrual European, 6.8D PT D 4.5 PT D 6.8 PT JD4045-3 JD6068-3 6510L Tractor Turbo high HP D 4.5 PT JD4045-3 6510S Tractor Turbo high HP D 4.5 PT JD4045-3 SE6510 Tractor European, 6.8D PT D 6.8 PT JD6068-3 6515 Tractor European, 6.8D PT D 6.8 PT JD6068-3 6600 6600 6600 6600 6600 6600 6600 6600 6600 Sprayer Combine Combine Combine Sprayer Combine Combine Combine Tractor 6602 6602 6602 6602 Combine Combine Combine Combine 6603 6603 D G D G D D D D D 239T 303 / 5.0L 329 Late 329 / 5.4L 4039T 404D Late 404T/A Late 466D 6059T 6-466T 6-466T D D D D 404T/A Early 404T/A Late 466T/A Early 466T/A Late Tractor Tractor Spain 6.8T PT D 6.8 PT D 6.8 PT JD6068-3 JD6068-3 6605 Tractor Turbo high HP D 6.8 PT JD6068-3 6610 6610 Tractor Forage Harvester European 6076H D 6.8 PT D 6076 T/A/H JD6068-3 JD6076-1 SE6610 Tractor European; 6.8T PT high HP D 6.8 PT JD6068-3 6615 Tractor 6.8T PT high HP D 6.8 PT JD6068-3 6620 6620 6620 Combine Combine Combine 6-466T 6-466T D 466D D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-1 JD466-2 JD466-3 6620SH 6620SH Combine Combine D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 6220 Tractor European, 4.5T PT high HP D 4.5 PT 6622 Combine 6-466T D 466T/A Late 6650 Forage Harvester 8.1H PT D 6081 / 8.1 PT JD6081-1 6700 Sprayer 4.5T PT D 4.5 PT JD4045-3 6710 Forage Harvester 8.1H PT D 6081 / 8.1 PT JD6081-1 6715 Tractor 6.8T PT high HP D 6.8 PT JD6068-3 machine s/n -> 156,501 sn 3728 - 157490 machine s/n 156,502 -> machine s/n 156,502 -> European Endurance Power Products JD - 23 277549 -> 335846 -> 335846 -> -> 335845 335846 -> T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD239-2 JD303-3 JD329-3 JD329-4 JD4039-2 JD404-4 JD404-6 JD466-1 JD6059-2 JD404-5 JD404-6 JD466-2 JD466-3 JD4045-3 T 253373 ->; A 67685 -> JD466-3 (800) 467-5545 John Deere Applications Machine Type Machine note 6750 Forage Harvester D 6125 / 12.5 PT JD6125-1 6800 Tractor D 6068T JD6068-2 6850 Forage Harvester D 6125 / 12.5 PT JD6125-1 6900 Tractor D 6068T JD6068-2 6910S Tractor D 6.8 PT JD6068-3 7020 Tractor 7200 Tractor 7210 Tractor 7400 Tractor 7405 Tractor 7410 European; 6.8T PT high HP Fuel / Engine Model D 404T/A Early Engine serial # -> 335845 Page JD404-5 D 6059T JD6059-2 D 6.8 PT JD6068-3 D 6068T JD6068-2 Turbo high HP D 6.8 PT JD6068-3 Tractor Turbo high HP D 6.8 PT JD6068-3 7420 Tractor Spain; 6.8T PT high HP D 6.8 PT JD6068-3 7440 Cotton Stripper D 359D JD359-1 7445 7445 Cotton Stripper Cotton Stripper D 359T D 6059T JD359-2 JD6059-2 7450 Cotton Stripper D 359T JD359-2 7455 Cotton Stripper Turbo D 6.8 PT JD6068-3 7460 Cotton Stripper 6.8T PT D 6.8 PT JD6068-3 7484 Cotton Stripper D 359T JD359-2 7500 7500 Tractor Tractor Spain Spain; 6.8T PT high HP D 6068T D 6.8 PT JD6068-2 JD6068-3 7510 Tractor Turbo high HP D 6.8 PT JD6068-3 7520 7520 Tractor Tractor Spain; 6.8T PT high HP D 531A D 6.8 PT JD531-4 JD6068-3 7600 Tractor D 6068T JD6068-2 7610 7610 7610 7610 Loader Loader Loader Tractor Knuckleboom Loader Knuckleboom Loader Knuckleboom Loader Turbo high HP D D D D 219 Early 1 219 Early 2 219 Late 6.8 PT -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 JD6068-3 7622 7622 7622 Loader Loader Loader Knuckleboom Loader Knuckleboom Loader Knuckleboom Loader D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 7640 7640 7640 Loader Loader Loader Knuckleboom Loader Knuckleboom Loader Knuckleboom Loader D 219 Early 1 D 219 Early 2 D 219 Late -> 275483 -> 275483 275484 -> JD219-1 JD219-2 JD219-3 7700 7700 7700 7700 Combine Combine Combine Tractor 335846 -> 335846 -> European 6076T D D D D JD404-4 JD404-6 JD466-1 JD6076-1 7710 Tractor 8.1H PT D 6081 / 8.1 PT 7720 7720 Combine Combine 6-466T 6-466T D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 7722 7722 Combine Combine 6-466T 6-466T D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 7800 Tractor 6076T D 6076 T/A/H JD6076-1 7810 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 7820 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 7920 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 Turbo high HP Endurance Power Products 404D Late 404T/A Late 466D 6076 T/A/H JD - 24 JD6081-1 (800) 467-5545 John Deere Applications Machine Type Machine note 8100 8100 Tractor Tractor machine sn -> 9,999 ; 6076H machine sn 10,000 -> ; 8.1H PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 8100T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8110 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8110T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8120 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8120T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8200 8200 Tractor Tractor machine sn -> 9,999; 6076H machine sn 10,000 -> ; 8.1H PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 8200T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8210 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8210T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8220 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8220T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8300 8300 Tractor Tractor machine sn -> 9,999; 6076H machine sn 10,000 -> ; 8.1H PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 8300T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8310 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8310T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8320 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8320T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8400 Tractor 6081H msn -> 86,535; 8.1PT msn 86,536 -> D 6081 / 8.1 PT JD6081-1 8400T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8410 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8410T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8420 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8420T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8430 Tractor 6-466A D 466T/A Early T -> 253372;A -> 67684 JD466-2 8440 Tractor 6-466A D 466T/A Early T -> 253372;A -> 67684 JD466-2 8450 Tractor 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 8520 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8520T Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 8560 Tractor 6076A Low Ring Piston D 6076 T/A/H JD6076-1 8570 Tractor 6076H D 6076 T/A/H JD6076-1 8630 8630 8630 Tractor Tractor Tractor D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 8640 Tractor D 619 Mid 33815 - 49059 JD619-2 8650 8650 8650 Tractor Tractor Tractor D 619 Early D 619 Mid D 619 Late -> 33814 33815 - 49059 49060 -> JD619-1 JD619-2 JD619-3 8760 Tractor esn -> 499,999 D 6101 / 10.1L JD6101-1 8770 Tractor esn 500,000 -> D 6101 / 10.1L JD6101-1 8820 8820 Combine Combine 6-466A 6-466A D 466T/A Early D 466T/A Late Endurance Power Products Fuel / Engine Model JD - 25 Engine serial # T -> 253372;A -> 67684 T 253373 ->; A 67685 -> Page JD466-2 JD466-3 (800) 467-5545 John Deere Applications Machine Type Machine note 8870 Tractor esn 500,000 -> D 6101 / 10.1L JD6101-1 8875 8875 Skidsteer Skidsteer machine sn -> 264,813 machine sn 264,813 -> ;Turbo D 3029T D 2.9 PT JD3029-2 JD3029-3 9100 Tractor 8.1H PT D 6081 / 8.1 PT JD6081-1 9200 Tractor D 6105 / 10.5L PT JD6105-1 9300 Tractor D 6125 / 12.5 PT JD6125-1 9300T Tractor D 6125 / 12.5 PT JD6125-1 9400 9400 9400 9400 Combine Combine Combine Tractor 359T 6068T 6.8 PT 6125 / 12.5 PT JD359-2 JD6068-2 JD6068-3 JD6125-1 9400T Tractor D 6125 / 12.5 PT JD6125-1 9410 Combine Turbo high HP D 6.8 PT JD6068-3 9450 Combine Turbo high HP D 6.8 PT JD6068-3 9500 Combine 6076T D 6076 T/A/H JD6076-1 9500SH Combine 6076H D 6076 T/A/H JD6076-1 9510 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9510SH Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9540 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9550 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9550SH Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9560 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9580 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9600 Combine 6076T,H D 6076 T/A/H JD6076-1 9610 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9640 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9650 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9650CTS Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9650STS Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9660 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9750 Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9750STS Combine 8.1H PT D 6081 / 8.1 PT JD6081-1 9860 Combine 8.1H PT D 6081 / 8.1 PT 9900 9900 9900 9900 Cotton Picker Cotton Picker Cotton Picker Cotton Picker D D D D 9910 Cotton Picker D 359D JD359-1 9920 9920 Cotton Picker Cotton Picker D 359D D 359T JD359-1 JD359-2 9930 9930 Cotton Picker Cotton Picker D 359T D 6059T JD359-2 JD6059-2 9935 Cotton Picker Turbo D 6.8 PT JD6068-3 9940 9940 Cotton Picker Cotton Picker 6-466A 6-466A D 466T/A Early D 466T/A Late T -> 253372;A -> 67684 T 253373 ->; A 67685 -> JD466-2 JD466-3 9950 Cotton Picker 6-466A D 466T/A Late T 253373 ->; A 67685 -> JD466-3 9960 Cotton Picker 6076T,H D 6076 T/A/H 6-359A 6068H Turbo high HP Endurance Power Products Fuel / Engine Model D D D D 329 Early 1 329 Early 2 329 Late 359D JD - 26 Engine serial # Page JD6081-1 -> 277548 -> 277548 277549 -> JD329-1 JD329-2 JD329-3 JD359-1 JD6076-1 (800) 467-5545 John Deere Applications Machine Type Machine note 9965 Cotton Picker 6076A D 6076 T/A/H JD6076-1 9970 9970 Cotton Picker Cotton Picker 6076A 8.1H PT D 6076 T/A/H D 6081 / 8.1 PT JD6076-1 JD6081-1 9976 Cotton Picker 8.1H PT D 6081 / 8.1 PT JD6081-1 Endurance Power Products Fuel / Engine Model JD - 27 Engine serial # Page (800) 467-5545 John Deere 2 Cylinder Bore 4.000 Stroke 4.000 100 / 1.6L Gas Tractor: M, MC, MI, MT; 320, 330; 40 CYLINDER KIT 1 1 SP338STD SP338045 Rebore kit Rebore kit 4.000 bore, Std; Piston, rings, pin, retainers [set of 2] .045, Piston, rings, pin, retainers [set of 2] 1 SP338090 Rebore kit .090, Piston, rings, pin, retainers [set of 2] 1 SP338125 Rebore kit .125, Piston, rings, pin, retainers [set of 2] 2 2243198045 Piston 0.045 oversize; 4.045 bore, 2.245 CD, 4.130 length, 1.000 pin; (3) 3/32, (1) 1/4 2 S4972 Ring set 4.000 bore; (3) 3/32, (1) 1/4 [1 cyl set] [AM1625T] 2 S4972040 Ring set 0.040 oversize; (3) 3/32, (1) 1/4 [1 cyl set] can be used with 0.045 pistons 1 2C7771 Ring set 4.000 bore; (2) 5/32, (1) 1/8, (1) 1/4 [2 cyl set] 1 2C7771 030 Ring set .030; (2) 5/32, (1) 1/8, (1) 1/4 [2 cyl set] 1 2C7771 040 Ring set .040; (2) 5/32, (1) 1/8, (1) 1/4 [2 cyl set] 2 2268014 Cylinder liner Repair sleeve, 1/8 wall, cut to length, 10-1/4 length 2 2268064 Cylinder liner Repair sleeve, 3/32 wall, cut to length, 10-1/4 length Bearing main set Std; 2.3970/2.3980 journal, 2.5700/2.5710 hsg bore, 2.010 and 2.266 length BEARINGS 1 4003M 2 2205CP Bearing rod pair M, MC, MI, MT; 320 sn -> 320854 2 2210SB Bearing rod pair 320 sn 320855 -> ; 330, 40 2 2204Y Bushing con rod 2 2233591 Bushing con rod Std, 2.2490/2.2500 journal, 2.4060/2.4070 hsg bore, 1.408 length 1 Bushing cam set Set of 2 brgs; 1.8095/1.8105 shaft, 1.9275/1.9285 hsg bore, 1.598 and 1.220 lgth [M762T, M761T] 1475M Std, 2.4980/2.4990 journal, 2.6500/2.6510 hsg bore, 1.339 length 1.1886 ID, 1.3130 OD, 1.615 length 1.1775 ID, 1.3165 OD, 1.620 length GASKET & SEALS 1 FS1866X Set overhaul [AM2153T] 1 HS1866 Set cylinder head [AM808T] 1 1 1866 VS37549 Gasket cylinder head Gasket valve cover [AM240T] 1 OS20762 Gasket oil pan [M85T] 1 1 62290 63392 Seal crankshaft front Seal crankshaft rear 1.125 shaft, 2.004 OD, 0.374 width, double lip [AL2653T] 4.000 shaft, 5.006 OD, 0.312 width, single lip Gear camshaft [M49T] CAMSHAFT 1 85500 VALVE TRAIN 2 2111782 Valve intake 1.808 head dia, 5.735 length, 0.3720 stem dia, 30 deg, 2G [M100T] 2 4 2111783 2173858 Valve exhaust Valve guide 1.554 head dia, 5.740 length, 0.3720 stem dia, 45 deg, 2G [M101T] 8 NB367R Valve lock 4 2 2121096 SB1812-5 Valve spring Valve insert 2 SB1625-1 Valve insert Both 1-3/8 ID, 1-5/8 OD, 7/32 depth, 45 degree Gear crankshaft 25 teeth [M16T] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog 0.375 ID, 0.6900 OD, 3.344 length, stepped [M40T] 2.625 free, 1.296 OD; 2.000@42, 1.625 @67 [M102T] CRANKSHAFT 1 85501 COOLING SYSTEM WPUMP1 Endurance Power Products JD100-1 (800) 467-5545 Endurance Power Products JD100-1 (800) 467-5545 John Deere 2 Cylinder Bore 4.250 Stroke 4.000 113 / 1.9L Gas Tractor: 420, 430 CYLINDER KIT 1 1 SP327STD SP327045 Rebore kit Rebore kit 4.250 bore, Std; Piston, rings, pin, retainers [set of 2] .045, Piston, rings, pin, retainers [set of 2] 1 SP327090 Rebore kit .090, Piston, rings, pin, retainers [set of 2] 1 SP327125 Rebore kit .125, Piston, rings, pin, retainers [set of 2] 2 2241444045 Piston 4.250 std bore, 0.045 oversize; 2.242 CD, 4.094 length, 1.878 pin, flant head; (3) 3/32, (1) 1/4 2 S40649 Ring set 4.2500 bore; (3) 3/32, (1) 1/4 [1 cyl set] [OE AR34394, AR40145] 2 S40649040 Ring set 0.040 oversize; (3) 3/32, (1) 1/4 [1 cyl set] can be used with 0.045 pistons 1 9541KX Ring set 4.2500 bore; (3) 3/32, (2) 1/4 [2 cyl set] 2 2 2268016 2268066 Cylinder liner Cylinder liner Repair sleeve, 1/8 wall, cut to length, 12.25 length Repair sleeve, 3/32 wall, cut to length, 12.25 length Std; 2.3970/2.3980 journal, 2.5700/2.5710 hsg bore, 2.010 and 2.266 length BEARINGS 1 2 4003M 2210SB Bearing main set Bearing rod pair 2 2204Y Bushing con rod 2 1 2233591 1475M Bushing con rod Bushing cam set 1.1775 ID, 1.3165 OD, 1.620 length Does not include front crank seal for 440 [AM3188T] Std, 2.4980/2.4990 journal, 2.6500/2.6510 hsg bore, 1.339 length 1.1886 ID, 1.3130 OD, 1.615 length Set of 2 brgs; 1.8095/1.8105 shaft, 1.9275/1.9285 hsg bore, 1.598 and 1.220 lgth [M762T, M761T] GASKET & SEALS 1 1 FS3126 HS3126 Set overhaul Set cylinder head 1 VS37083 Gasket valve cover [AM3189T] [M3066T] 1 OS20762 Gasket oil pan [M85T] Seal crankshaft front 1.125 shaft, 2.006 OD, 0.500 width Seal crankshaft front 1.875 shaft, 2.504 OD, 0.437 width Seal crankshaft rear 4.000 shaft, 5.006 OD, 0.312 width, single lip Gear camshaft [M49T] 1 46174 420, 430 1 46289 440 1 63392 CAMSHAFT 1 85500 VALVE TRAIN 2 2111748 Valve intake [M3153T] 2 4 2111749 2173859 Valve exhaust Valve guide [M3154T] 8 NB367R Valve lock 4 2 2121096 SB1812-3 Valve spring Valve insert 2 SB1625-1 Valve insert Intake; 1-1/2T ID, 1-13/16 OD, 7/32 depth 1-3/8 ID, 1-5/8 OD, 7/32 depth, 45 degree Gear crankshaft 25 teeth [M16T] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog 0.3750 ID, 0.6900 OD, 2.844 length, stepped [M3036T] 2.625 free, 1.296 OD; 2.000@42, 1.625 @67 [M102T] CRANKSHAFT 1 85501 COOLING SYSTEM WPUMP1 Endurance Power Products JD113-1 (800) 467-5545 Endurance Power Products JD113-1 (800) 467-5545 John Deere 4 Cylinder Bore 3.500 Stroke 3.000 115 / 1.9L Gas Cylinder liner plate Piston: T13057 Tractor: 1010; Crawler 1010 CYLINDER KIT 4 4 2241547 S40369 Piston Ring set Std, 3.5000 bore, 2.495 CD, 3.859 length, 1.1878 pin, flat head; (3) 3/32, (1) 3/16 [T13057] 3.500 bore, (3) 3/32, (1) 3/16 [1 cyl set] BEARINGS Std, full groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 1 4144M Bearing main set 1010 machine s/n -> 31,000; Power units esn -> 15,082; Std, half groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 1 4344M Bearing main set 1010 machine sn 31,001 -> ; Power units esn 15,083 -> Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 4 2595A Bearing rod pair 4 2599Y20 Bushing con rod 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] 1 1251M Bearing cam set Set of 3 bearings Felpro set fits: 115G, 145G from sn 30,001, 165G GASKET & SEALS 1 FS8145PT-1 Set overhaul 1 1 HS3243VY CS3243VC Set cylinder head Set conversion 1 OS20767 1010 Type: RC, RU, RUS 1 OS20766 1010 Type: OR, RS, UT 1 VS38116 Gasket valve cover 1 1 Seal crankshaft front Seal crankshaft rear 1.500 shaft, 2.381 OD, 0.500 width 3.750 shaft, 4.757 OD, 0.375 width 46328SF 46757 Gasket oil pan Gasket oil pan VALVE TRAIN 4 4 2111750 2111751 Valve intake Valve exhaust 1.687 head dia, 4.775 length, 0.342 stem dia, 30 degree, 2G 1.375 head dia, 4.780 length, 0.342 stem dia, 45 degree, 2G [T12357] 8 2173860 Valve guide 0.3440 ID, 0.6270 OD, 2.375 length, stepped 8 16 2121114 2165081 Valve spring Valve lock 2.125 free length, 1.125 OD; 1.656@55, 1.256@107 4 2188581 Valve insert Intake 4 2187445 Valve insert Exhaust WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD115-1 (800) 467-5545 Endurance Power Products JD115-1 (800) 467-5545 John Deere 3 Cylinder Bore 3.860 Stroke 3.860 135 / 2.2L Diesel BEARINGS 4 NRE27352 Bearing main pair Standard 1 NAT21139 Bearing thrust pair Flanged, std 4 NRE27353 Bearing main pair .010 1 NAT21132 Bearing thrust pair Flanged, .010 4 NRE27360 Bearing main pair .020 1 NAT21134 Bearing thrust pair Flanged, .020 4 NRE27368 Bearing main pair .030 1 NAT21136 Bearing thrust pair Flanged, .030 4 NRE27348 Bearing rod pair Standard 4 4 NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 4 NRE27364 Bearing rod pair .030 4 NT23471 Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 Does not include crank seals: Order NAR67942, NRE44574 GASKET & SEALS 1 1 HS8322B-1 CS3800 Set cylinder head Set conversion 1 NR97341 Gasket oil pan 1 1 NRE44574 TCS45614 Seal crankshaft rear Set front cover COOLING SYSTEM WPUMP1 WATER PUMP Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog JD135-1 (800) 467-5545 Endurance Power Products JD135-1 (800) 467-5545 John Deere 3 Cylinder Bore 3.860 Stroke 3.860 135 / 2.2L Gas Piston: T23504 Tractor: 1020 HiCycle: 600, 700, 734 Windrower: 215, 880 Industrial Tractor: JD300, 301 Crawler: JD350, JD350B Backhoe loader: 300B Forklift: JD380 CYLINDER KIT 3.8583 bore, 2 seal ring grooves on liner, Sold as assembly only 3 SL-2689 Cylinder kit 1020 esn -> 162,078; JD300 sn -> 106,068; JD350 sn -> 105,997; Windrower and HiCycle: esn -> 162,300 3.8583 bore, no seal ring grooves on liner, Sold as assembly only 3 SL-2688 Cylinder kit 1020 esn 162,078 ->; JD300 sn 106,069 ->; JD300B all; JD301; JD350 sn 105,598 ->; JD350B all; JD380 all; Windrower and HiCycle: esn 162,301 -> 3 2242023 Piston 3.86 bore, 2.135 CD, 3.750 length, cup 0.213 x 2.47, 1.1878 pin, cup; (2) 3/32, (1) 0.197 [T23504] 3 S40726 Ring set 3.8600 bore; (2) 3/32, (1) 0.197 [1 cyl set] Grv on slv; 3.86 bore, 4.8415 x 0.238 flange, 4.450 barrel, 4.2365 seal OD, 4.5285 pilot OD [AR52252] 3 2264444 Cylinder liner kit 1020 esn -> 162,078; JD300 sn -> 106,068; JD350 sn -> 105,997; Windrower and HiCycle: esn -> 162,300 Grv in blck; 3.86 bore, 4.8385 x 0.238 flange, 4.440 barrel, 4.2365 seal OD, 4.5285 pilot OD [T32350] 3 2264463 Cylinder liner kit 1020 esn 162,078 ->; JD300 sn 106,069 ->; JD300B all; JD301; JD350 sn 105,598 ->; JD350B all; JD380 all; Windrower and HiCycle: esn 162,301 -> 3 3 2237164 2237163 Cylinder liner oring kit Cylinder liner oring kit 3 seal rings, for liner with 2 grooves 3 seal rings, for liner with no grooves BEARINGS 2 NRE27352 Bearing main pair Standard 1 NAT21139 Bearing thrust pair Flanged, std 2 NRE27353 Bearing main pair .010 1 NAT21132 Bearing thrust pair Flanged, .010 2 NRE27360 Bearing main pair .020 1 NAT21134 Bearing thrust pair Flanged, .020 2 NRE27368 Bearing main pair .030 1 NAT21136 Bearing thrust pair Flanged, .030 3 2595A Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 3 3 2595A 10 2595A 20 Bearing rod pair Bearing rod pair .010 .020 3 2595A 30 Bearing rod pair .030 3 2599Y20 Bushing con rod 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] Set overhaul Set cylinder head Complete, includes rear main seal and wear slv; early style rear seal not included [RE501575, RE38572] GASKET & SEALS 1 1 260-1385 HS8322B 1 [RE38565] Does not include crank seals: Order NAR67942, NRE44574 CS3800 Set conversion seal with sleeve 1 NAR67942 Seal crankshaft front [OEM] Use with T22991 housing; face type seal 1 T20326 Seal crankshaft rear 1020 esn -> 35,894; JD300 sn -> 36,348; JD450 sn -> 37,637; Windrower and HiCycle: esn -> 36,348 1 NRE44574 Seal crankshaft rear All others 1 NR97341 Gasket oil pan For use with steel pan 1 R119359 Gasket oil pan 1 NR98460 Gasket cylinder head 1 NR75729 Gasket valve cover Endurance Power Products JD135-2 (800) 467-5545 John Deere 135 / 2.2L Gas (Continued) 1 TCS45614 3 Cylinder Bore 3.860 Stroke 3.860 Piston: T23504 Set front cover CAMSHAFT 6 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN 3 2111940 Valve intake 1.772 head dia, 5.312 length, 0.372 stem dia, 45 degree, 2G 3 2111943 Valve exhaust 1.457 head dia, 5.322 length, 0.372 stem dia, 45 degree, 1G 3 6 01305S NR26125 Valve exhaust Valve spring 1.457 head dia, 5.322 length, 0.3720 stem dia, 0.2725 tip to grv, 45 deg 1G, stellite 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NT20077 Valve lock 6 6 NR87627 140-7248 Valve seal Valve guide Oring 0.3750 ID, 0.5640 OD, 2.750 length, plain, 1-SR, iron (optional, recommended) 6 140-9115 Valve guide 0.3750 ID, 0.5020 OD, 2.750 length, plain, 1-SR, iron (spiral ID conversion guide) 3 3 SB1812-4 SB1562-4 Valve insert Valve insert Intake, 1-9/16 ID, 1-13/16 OD, 7/32 depth, 45 degree Intake, 1-5/16 ID, 1-9/16 OD, 1/4 depth, 45 degree, use with 1.480 valve head dia New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM 1 WPUMP1 AT22962 WATER PUMP Thermostat 1 NRE33705 Thermostat 160 degree, heavy-duty service 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 1 AT22963 Thermostat 192 degree Endurance Power Products JD135-2 (800) 467-5545 John Deere 4 Cylinder Bore 3.625 Stroke 3.500 145 / 2.4L Diesel Cylinder liner plate Tractor: 1010 Piston: T19061 Crawler: 1010 CYLINDER KIT 4 1 S4535 5504X Ring set Ring set 3.6250 bore; (3) 3/32, (1) 3/16 3.6250 bore; (3) 3/32, (1) 3/16; Economy 1 5923KX Ring set 3.6250 bore; (2) 3/32, (1) 3/16 [4 cyl set] BEARINGS 1 4145M Bearing main set 1010 machine s/n -> 31,000 1 4345M Bearing main set 1010 machine sn 31,001 -> 4 2595A Bearing rod pair Std, full groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 4 1 Bushing con rod Bearing cam set 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] Set of 3 bearings Set overhaul Model year 1961 and up Set cylinder head Model year 1961 and up 2599Y20 1251M Std, half groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length GASKET & SEALS 1 FS3286VX Model year 1961 and up 1 HS3286VX Model year 1961 and up 1 OS20766 Gasket oil pan 1 46328SF Seal crankshaft front 1.500 shaft, 2.381 OD, 0.500 width 1 46757 Seal crankshaft rear 3.750 shaft, 4.757 OD, 0.375 width Valve intake [OEM] Valve intake [OEM] [repl T15686 when also order T30118 locks] Valve exhaust [OEM] Valve exhaust [OEM] [repl T15685 when also order T30118 locks] Valve guide [OEM] Valve guide 0.3440 ID, 0.6270 OD, 2.875 length, stepped [T15683] Valve spring Valve lock 2.125 free length, 1.125 OD; 1.656@55, 1.256@107 [T167T] VALVE TRAIN 4 T12873 esn -> 13,071 4 T30119 esn 13,072 -> 4 T11217 esn -> 13,071 4 T30120 esn 13,072 -> 8 T11211 esn -> 13,071 8 2173896 esn 13,072 -> 8 2121114 16 2165081 16 T30118 Valve lock use with T30119 and T30120 valves 4 4 SB1687-2 SB1437-3N Valve insert Valve insert Intake Exhaust, 1-3/16 ID, 1-7/16 OD, 7/32 depth WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD145-1 (800) 467-5545 Endurance Power Products JD145-1 (800) 467-5545 John Deere 4 Cylinder Bore 3.625 Stroke 3.500 145 / 2.4L Gas Cylinder liner plate Tractor: 2010 Crawler: 2010 Piston: T12382 Windrower: 215 CYLINDER KIT 4 4 2241549 2241549040 Piston Piston 3.6250 bore, 2.250 CD, 4.000 length, 1.878 pin, flat head; (3) 3/32, (1) 3/16 [T12382] .040 4 S4535 Ring set 3.6250 bore; (3) 3/32, (1) 3/16 1 1 5504X 5923KX Ring set Ring set 3.6250 bore; (3) 3/32, (1) 3/16; Economy 3.6250 bore; (2) 3/32, (1) 3/16 [4 cyl set] BEARINGS Std, full groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 1 4144M Bearing main set 2010 machine s/n -> 29,000; Power units esn -> 35,833; Std, half groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 1 4344M Bearing main set 2010 machine sn 29,001 -> ; Power units esn 35,834 -> Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 4 2595A Bearing rod pair 4 2599Y20 Bushing con rod 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] 1 1251M Bearing cam set Set of 3 bearings Set overhaul Clevite set fits: 145G year 1961 and up GASKET & SEALS 1 FS3286VC Model year 1961 and up 1 HS3286VC Model year 1961 and up 1 OS20767 Model year 1961 and up 1 OS20766 Model year 1958 to 1960 1 VS38116 1 46328SF Gasket valve cover Seal crankshaft front 1.500 shaft, 2.381 OD, 0.500 width 1 Seal crankshaft rear 3.750 shaft, 4.757 OD, 0.375 width 46757 Set cylinder head Gasket oil pan Gasket oil pan VALVE TRAIN 4 2111750 Valve intake 2010 All; Power units: sn 30,000 -> 4 2111770 Valve intake Power units: sn -> 30,000 4 2111751 Valve exhaust 2010 All; Power units: sn 30,000 -> 4 2111771 Valve exhaust Power units: sn -> 30,000 8 2173860 Valve guide 1.687 head dia, 4.775 length, 0.342 stem dia, 30 degree, 2G 8 16 2.125 free length, 1.125 OD; 1.656@55, 1.256@107 2121114 2165081 Valve spring Valve lock 4 2187577 Valve insert 2010 All; Power units: sn 30,000 -> 4 2187595 Valve insert Power units: sn -> 30,000 4 2187445 Valve insert 2010 All; Power units: sn 30,000 -> 4 2187439 Valve insert Power units: sn -> 30,000 1.687 head dia, 4.670 length, 0.342 stem dia, 30 degree, 2G 1.375 head dia, 4.780 length, 0.342 stem dia, 45 degree, 2G [T12357] 1.375 head dia, 4.680 length, 0.342 stem dia, 45 degree, 2G 0.3440 ID, 0.6270 OD, 2.375 length, stepped Intake Intake Exhaust Exhaust COOLING SYSTEM WPUMP1 WATER PUMP Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog JD145-2 (800) 467-5545 Endurance Power Products JD145-2 (800) 467-5545 John Deere 2 Cylinder Bore 4.250 Stroke 5.250 149 / 2.4L Gas Tractor: B, BN, BW: sn -> 59,999 [Unstyled]; BO, BR: sn -> 328,999 CYLINDER KIT 1 1 2C7741 7741 Ring set Ring set 4.2500 bore; (3) 3/16, (1) 3/16 [2 cyl set] 4.2500 bore; (3) 3/16, (1) 3/16 [2 cyl set] Cast Set overhaul [AB3874R] GASKET & SEALS 1 FS7381S VALVE TRAIN 2 B362R Valve intake [OEM] 2 4 B2878R B358R Valve exhaust Valve guide [OEM] [OEM] 8 NB367R Valve lock 4 B365R Valve spring [OEM] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD149-1 (800) 467-5545 Endurance Power Products JD149-1 (800) 467-5545 John Deere 3 Cylinder Bore 3.86 Stroke 4.33 152 Early Diesel Orings on liner; esn -> 154765 Tractor: 820, 830, 920, 1020, 1030 Loader backhoe: 300, 300A, 300B, 301, 301A Block: T24963, T26935 Rod: T20007 Piston: T23481 Crawler dozer: JD350, JD350A, JD350B ENGINE KITS RP281 RP278 Overhaul kit InFrame kit RP606 Underhaul kit Liner oring grooves on liner Liner oring grooves on liner CYLINDER KIT 3 RP264 Cylinder kit 3 NT23481 Piston body 3 6 NT23482 NR51112 Piston pin Retainer piston pin 3 NAR70633 Ring set 3 3 NAR51902 RP633 Cylinder liner Cylinder liner oring kit Liner (NR48635) with orings 3 seal rings, for liner with 2 grooves NRE27352 NRE27353 Bearing main pair Bearing main pair Standard .010 NRE27360 Bearing main pair .020 NRE27368 NAT21139 Bearing main pair Bearing thrust pair .030 NAT21132 Bearing thrust pair NAT21134 NAT21136 Bearing thrust pair Bearing thrust pair NAR81786 Bearing thrust pair NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair NAR81790 Bearing thrust pair 3 1 NR78598 NAR95932 3 NRE27348 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 Bearing rod pair .010 NRE27358 NRE27364 Bearing rod pair Bearing rod pair .020 .030 Grooves on liner [NT23481 pist, NT23482 pin, NR51112 ret, NAR70633 ring, NAR51902 liner, RP633] BEARINGS 3 1 1 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 3 NT23471 Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 3 1 NT23471S NT20034 Bushing con rod Bushing idler Borable, for 1.19 pin, optional useage for honable upper 1 NT26321 Bushing idler lower Does not include crank seals (Replaces NRE38570) GASKET & SEALS 1 NRE501574 Set overhaul 1 NRE38848 Set cylinder head 1 1 RP681 RP340 Set conversion Set oil pan 1 NR98460 Gasket cylinder head 1 1 NR75729 NR97341 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear (Do not use w/ flywheel hsg# T20300, T22991) Add to pan & head sets to create complete OH set Includes oil pump installation gaskets seal with sleeve CAMSHAFT 1 R119707 Camshaft 6 NT20073 Lifter 1 NR81513 Tach drive shaft Endurance Power Products [OEM] [repl R82819] Slotted style; threaded JD152-1 (800) 467-5545 John Deere 3 Cylinder Bore 3.86 Stroke 4.33 152 Early (Continued) Diesel Orings on liner; esn -> 154765 1 NR81514 Block: T24963, T26935 Rod: T20007 Piston: T23481 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN 1 CYLHEAD HKJD330 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Intake 45 deg, Exhaust 45 deg; 6 retainers 3 NR79624 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 3 NR79623 NR51734 Valve intake Valve insert 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 3 RP223 Valve insert Intake, 45 degree 12 6 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NR41412 Retainer valve spring 6 6 NR87627 NT20129 Valve seal Valve stem cap Oring 14 T20183 Bolt cylinder head 1/2 x 4 [check length for proper bolts] 14 14 R53223 T20168 Bolt cylinder head Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 EAT18005 Connecting rod Remanufactured: Cast# T20007 6 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) FUEL / INJECTOR 3 NAR89564 Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 3 EAR89564 Injector Reman, pencil type Boot injector Tee leak-off boot 3 NT23425 Engine s/n -> 108438 8 NR34766 Engine s/n -> 108438 3 NAT27622 Engine s/n 108439 -> 1 NRE42211 Clamp leak off line boot Injector line connector ki Hose barb type Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD152-1 (800) 467-5545 John Deere 3 Cylinder Bore 3.86 Stroke 4.33 152 Late Diesel Orings in block; esn 154766 -> Tractor: 820, 830, 920, 1020, 1030 Loader backhoe: 300, 300A, 300B, 301, 301A Block: R53240, R55100, R72967, T32339 Rod: T20007 Piston: T23481 Crawler dozer: JD350, JD350A, JD350B ENGINE KITS RP261 RP168 Overhaul kit InFrame kit RP606 Underhaul kit Liner oring grooves in block Liner oring grooves in block CYLINDER KIT 3 NAR71591 Cylinder kit 3 NT23481 Piston body 3 6 NT23482 NR51112 Piston pin Retainer piston pin 3 NAR70633 Ring set 3 3 NT32340 NAR71617 Cylinder liner Cylinder liner oring kit 3 NT324340K Cylinder liner Liner with orings [NT32340, NAR71617] NR46905 Cylinder liner shim .004 Grooves in blk [NT23481 pist, NT23482 pin, NR51112 ret, NAR70633 ring, NT32340 liner, NAR71617] BEARINGS 3 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair 3 NR78598 Thrust washer main 1 NAR95932 3 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 3 NRE27364 NT23471 Bearing rod pair Bushing con rod .030 Honable, for 1.19 pin, use with rod cast# R81410, T20007 3 NT23471S Bushing con rod Borable, for 1.19 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 Std, use with flangeless thrust GASKET & SEALS 1 1 NRE501574 NRE38848 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE38570) 1 RP681 Set conversion Add to pan & head sets to create complete OH set 1 1 RP340 NR98460 Set oil pan Gasket cylinder head Includes oil pump installation gaskets 1 NR75729 Gasket valve cover 1 1 NR97341 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front seal with sleeve 1 NRE44574 Seal crankshaft rear (Do not use w/ flywheel hsg# T20300, T22991) CAMSHAFT 1 R119707 Camshaft Endurance Power Products [OEM] [repl R82819] JD152-2 (800) 467-5545 John Deere 3 Cylinder Bore 3.86 Stroke 4.33 152 Late (Continued) Diesel Orings in block; esn 154766 -> 6 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Block: R53240, R55100, R72967, T32339 Rod: T20007 Piston: T23481 Helical gear style, 12 tooth; threaded VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 3 HKJD330 NR79624 Valve kit Valve exhaust Intake 45 deg, Exhaust 45 deg; 6 retainers 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 NR79623 Valve intake 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 3 NR51734 RP223 Valve insert Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 45 degree 12 NT20077 Valve lock 6 6 NR26125 NR41412 Valve spring Retainer valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NR87627 Valve seal Oring 6 14 NT20129 T20183 Valve stem cap Bolt cylinder head 1/2 x 4 [check length for proper bolts] 14 R53223 Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] 14 T20168 Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 EAT18005 Connecting rod 6 NR74194 Bolt connecting rod Remanufactured: Cast# T20007 Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump 1 NAR62979K Oil pump kit Oil pump with 1.625 gear, housing marked R54615 For pump with 1.625 gear, housing marked R54615 (replaces RP248) New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type FUEL / INJECTOR 3 3 NAR89564 EAR89564 Injector Injector 3 NAT27622 1 NRE42211 Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog Endurance Power Products JD152-2 (800) 467-5545 John Deere 3 Cylinder Bore 3.8583 Stroke 4.238 152 / 2.5L Gas GASKET & SEALS 1 HS8322B Set cylinder head [RE38565] 1 1 CS8322 T20326 Set conversion Seal crankshaft rear Rubber one-piece rear main bearing seal included; 5.756 seal OD; wear sleeve included [OEM] Use with T22991 housing; face type seal 1 NRE44574 Seal crankshaft rear 1 1 NR97341 R119359 Gasket oil pan Gasket oil pan 1 TCS45614 Set front cover For use with steel pan COOLING SYSTEM WPUMP1 WATER PUMP Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog JD152-3 (800) 467-5545 Endurance Power Products JD152-3 (800) 467-5545 John Deere 4 Cylinder Bore 3.750 Stroke 3.500 155 / 2.5L Diesel BEARINGS 1 4145M Bearing main set Std, full groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 4 4 2595A 2595A 10 Bearing rod pair Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length .010 4 2595A 20 Bearing rod pair .020 4 4 2595A 30 2599Y20 Bearing rod pair Bushing con rod .030 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] 1 1251M Bearing cam set Set of 3 bearings GASKET & SEALS 1 FS8145SB Set overhaul 1 HS3243VX Set cylinder head 1 1 OS20766 46328SF Gasket oil pan Seal crankshaft front 1.500 shaft, 2.381 OD, 0.500 width 1 46757 Seal crankshaft rear 3.750 shaft, 4.757 OD, 0.375 width Endurance Power Products JD155-1 (800) 467-5545 Endurance Power Products JD155-1 (800) 467-5545 John Deere 3 Cylinder Bore 4.02 Stroke 4.33 164 Early 1 Diesel 1.19 pin, orings on liner; esn -> 179601 Tractor: 830, 930, 1120, 1130; 1520 sn -> 160,309; 1530 Block: T26933 Rod: T20007 Piston: AR78310, RE53265 Crawler dozer: JD350B ENGINE KITS RP292 RP289 Overhaul kit InFrame kit RP606 Underhaul kit CYLINDER KIT 3 RP288 Cylinder kit 3 NRE53265 Piston body 3 6 NT26149 NR51112 Piston pin Retainer piston pin 3 NAR55759 Ring set 3 3 NAR51903 RP634 Cylinder liner Cylinder liner oring kit Liner (NR48636) with orings; 2 oring grooves on liner NRE27352 NRE27353 Bearing main pair Bearing main pair Standard .010 NRE27360 Bearing main pair .020 NRE27368 NAT21139 Bearing main pair Bearing thrust pair .030 NAT21132 Bearing thrust pair NAT21134 NAT21136 Bearing thrust pair Bearing thrust pair NAR81786 Bearing thrust pair NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair NAR81790 Bearing thrust pair 3 1 NR78598 NAR95932 3 NRE27348 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 Bearing rod pair .010 NRE27358 NRE27364 Bearing rod pair Bearing rod pair .020 .030 Grooves on liner [NRE53265 pist, NT26149 pin, NR51112 ret, NAR55759 ring, NAR51903 liner, RP634] BEARINGS 3 1 1 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 3 NT23471 Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 3 1 NT23471S NT20034 Bushing con rod Bushing idler Borable, for 1.19 pin, optional useage for honable upper 1 NT26321 Bushing idler lower Does not include crank seals GASKET & SEALS 1 NRE38853 Set overhaul 1 NRE38850 Set cylinder head 1 1 RP681 RP340 Set conversion Set oil pan 1 NR97356 Gasket cylinder head 1 1 NR75729 NR97341 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear (Do not use w/ flywheel hsg# T20300, T22991) Add to pan & head sets to create complete OH set Includes oil pump installation gaskets seal with sleeve CAMSHAFT 1 R119707 Camshaft 6 NT20073 Lifter 1 NR81513 Tach drive shaft Endurance Power Products [OEM] [repl R82819] Slotted style; threaded JD164-1 (800) 467-5545 John Deere 3 Cylinder Bore 4.02 Stroke 4.33 164 Early 1 (Continued) Diesel 1.19 pin, orings on liner; esn -> 179601 1 NR81514 Block: T26933 Rod: T20007 Piston: AR78310, RE53265 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN 1 CYLHEAD HKJD332 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Intake 45 deg, Exhaust 45 deg; 3 retainers, 3 rotators 3 NR79624 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 3 NR89226 NR79623 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 3 12 RP223 NT20077 Valve insert Valve lock Intake, 45 degree 6 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 3 NR41412 Intake 3 NRE11410 Exhaust 6 NR87627 Retainer valve spring Valve seal Rotocap 6 NT20129 Valve stem cap 14 14 T20183 R53223 Bolt cylinder head Bolt cylinder head 14 T20168 Washer head bolt Oring 1/2 x 4 [check length for proper bolts] 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 EAT18005 Connecting rod Remanufactured: Cast# T20007 6 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR62979K NRE31929 Oil pump kit Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 10 plate (Also order RP386 installation kit) Injector Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type FUEL / INJECTOR 3 3 NAR89564 EAR89564 3 NAT27622 1 NRE42211 Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog Endurance Power Products JD164-1 (800) 467-5545 John Deere 3 Cylinder Bore 4.02 Stroke 4.33 164 Early 2 Diesel 1.19 pin, orings in block; esn -> 179601 Tractor: 830, 930, 1120, 1130; 1520 sn 160,310 -> ; 1530 Rod: T20007 Piston: AR78310, RE53265 Crawler dozer: JD350B ENGINE KITS RP202 RP171 Overhaul kit InFrame kit RP606 Underhaul kit CYLINDER KIT 3 NAR71593 Cylinder kit 3 NRE53265 Piston body 3 6 NT26149 NR51112 Piston pin Retainer piston pin 3 NAR55759 Ring set 3 3 NR116463 NAR71618 Cylinder liner Cylinder liner oring kit 3 NR116463K Cylinder liner kit Liner with orings [NR116463, NAR71618] NR46906 Cylinder liner shim .004 Grooves in blk [NRE53265 pis, NT26149 pin, NR51112 ret, NAR55759 ring, NR116463 liner, NAR71618] No seal grooves on liner 3 seal rings, for liner with no grooves BEARINGS 3 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair 3 NR78598 Thrust washer main 1 NAR95932 3 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 3 NRE27364 NT23471 Bearing rod pair Bushing con rod .030 Honable, for 1.19 pin, use with rod cast# R81410, T20007 3 NT23471S Bushing con rod Borable, for 1.19 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 Std, use with flangeless thrust GASKET & SEALS 1 1 NRE38853 NRE38850 Set overhaul Set cylinder head Does not include crank seals 1 RP340 Set oil pan Includes oil pump installation gaskets 1 1 RP681 NR97356 Set conversion Gasket cylinder head Add to pan & head sets to create complete OH set 1 NR75729 Gasket valve cover 1 1 NR97341 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front seal with sleeve 1 NRE44574 Seal crankshaft rear (Do not use w/ flywheel hsg# T20300, T22991) CAMSHAFT 1 R119707 Camshaft Endurance Power Products [OEM] [repl R82819] JD164-2 (800) 467-5545 John Deere 3 Cylinder Bore 4.02 Stroke 4.33 164 Early 2 (Continued) Diesel 1.19 pin, orings in block; esn -> 179601 6 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Rod: T20007 Piston: AR78310, RE53265 Helical gear style, 12 tooth; threaded VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 3 HKJD332 NR79624 Valve kit Valve exhaust Intake 45 deg, Exhaust 45 deg; 3 retainers, 3 rotators 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 NR89226 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 3 3 NR79623 NR51734 Valve intake Valve insert 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 3 RP223 Valve insert Intake, 45 degree 12 6 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 3 NR41412 Intake 3 NRE11410 Exhaust 6 NR87627 6 NT20129 Retainer valve spring Rotocap Valve seal Valve stem cap Oring 14 T20183 Bolt cylinder head 1/2 x 4 [check length for proper bolts] 14 14 R53223 T20168 Bolt cylinder head Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 EAT18005 Connecting rod Remanufactured: Cast# T20007 6 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NRE31929 Oil cooler 10 plate (Also order RP386 installation kit) New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 FUEL / INJECTOR 3 NAR89564 Injector 3 3 EAR89564 NAT27622 1 NRE42211 Reman, pencil type Injector Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog Endurance Power Products JD164-2 (800) 467-5545 John Deere 3 Cylinder Bore 4.02 Stroke 4.33 164 Late Diesel 1.37 pin, orings in block; esn 179602 -> Rod: R51727 Piston: AR55984, AR77762 Tractor: 830, 930, 1120, 1130; 1520 sn 160,310 -> ; 1530; 2040 sn -> 349,000 Loader Backhoe: 302, 302A, JD310 Crawler dozer: JD350B, 350C ENGINE KITS RP205 RP174 Overhaul kit InFrame kit RP606 Underhaul kit Standard Standard CYLINDER KIT 3 NRE53321 Cylinder kit Std comp [NAR77762 pist, NR125754 pin, NM41029 ret, NAR55759 ring, NR116463 liner, NAR71618] 3 NAR77762 Piston body Std compression 3 3 NRE53322 NAR87736 Cylinder kit Piston body High comp [NAR87736 pist, NR125754 pin, NM41029 ret, NAR55759 ring, NR116463 liner, NAR71618] High compression 3 NR125754 Piston pin 6 3 NM41029 NAR55759 Retainer piston pin Ring set 3 NR116463 Cylinder liner No seal grooves on liner 3 3 NAR71618 NR116463K Cylinder liner oring kit Cylinder liner kit 3 seal rings, for liner with no grooves Liner with orings [NR116463, NAR71618] NR46906 Cylinder liner shim .004 NRE27352 Bearing main pair NRE27353 Bearing main pair Standard .010 NRE27360 NRE27368 Bearing main pair Bearing main pair NAT21139 Bearing thrust pair NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair NAT21136 Bearing thrust pair NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair NAR81789 Bearing thrust pair NAR81790 BEARINGS 3 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 3 1 NR78598 NAR95932 3 NRE27348 Flangeless, .030 Bearing thrust pair Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 NRE27364 Bearing rod pair .030 3 3 NR55647 NR55647S Bushing con rod Bushing con rod Honable, for 1.37 pin, use with rod cast# R51727, R80034 Borable, for 1.37 pin, optional useage for honable 1 NT20034 Bushing idler upper 1 NT26321 Bushing idler lower GASKET & SEALS 1 NRE38853 Set overhaul Does not include crank seals 1 1 NRE38850 RP340 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP681 Set conversion Add to pan & head sets to create complete OH set 1 1 NR97356 NR75729 Gasket cylinder head Gasket valve cover 1 NR97350 Gasket fuel pump mtg 1 1 NR97341 NAR67942 Gasket oil pan Seal crankshaft front seal with sleeve 1 NRE44574 Seal crankshaft rear (Do not use w/ flywheel hsg# T20300, T22991) Endurance Power Products JD164-3 (800) 467-5545 John Deere 3 Cylinder Bore 4.02 Stroke 4.33 164 Late (Continued) Diesel 1.37 pin, orings in block; esn 179602 -> Rod: R51727 Piston: AR55984, AR77762 CAMSHAFT 1 R119707 Camshaft [OEM] [repl R82819] 6 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD332 Valve kit Intake 45 deg, Exhaust 45 deg; 3 retainers, 3 rotators 3 3 NR79624 NR89226 Valve exhaust Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 3 NR79623 Valve intake 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 3 NR51734 RP223 Valve insert Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 45 degree 12 NT20077 Valve lock 6 NR26125 3 NR41412 Intake 3 NRE11410 Exhaust 6 NR87627 Valve spring Retainer valve spring Valve seal 6 14 NT20129 T20183 Valve stem cap Bolt cylinder head 14 R53223 Bolt cylinder head 1/2 x 4 [check length for proper bolts] 1/2 x 4-1/4 [check length for proper bolts] 14 T20168 Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Rotocap Oring CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 3 ER55978 ERE21076 Connecting rod Connecting rod Remanufactured: Cast# R51727 Remanufactured: Cast# R80034 6 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 6 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR62979K NRE31929 Oil pump kit Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 10 plate (Also order RP386 installation kit) Injector Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type FUEL / INJECTOR 3 3 NAR89564 EAR89564 3 NAT27622 engine s/n -> 505334 3 RP588 engine s/n 505335 -> 3 NR66090 engine s/n 505335 -> 1 NRE42211 Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM WPUMP1 WPUMP2 Endurance Power Products JD164-3 (800) 467-5545 John Deere 3 Cylinder Bore 4.020 Stroke 4.328 164 / 2.7L Gas Tractor: 1520 Industrial Tractor: 302, 302A Piston: T30014 Backhoe loader: JD310 CYLINDER KIT 3 3 T30014 S41260 Piston body Ring set [OEM] 4.0157 bore; (2) 3/32, (1) 0.197 [1 cyl set] 3 NAR51903 Cylinder liner 1520 esn -> 158,993; Early: 302, 302A, JD310 3 NR116463 Cylinder liner 1520 esn 158,994 -> ; Late: 302, 302A, JD310 Liner (NR48636) with orings; 2 oring grooves on liner 3 RP633 Cylinder liner oring kit 3 seal rings, for liner with 2 grooves 3 NAR71618 Cylinder liner oring kit 3 seal rings, for liner with no grooves Standard Flanged, std No seal grooves on liner BEARINGS 2 NRE27352 Bearing main pair 1 NAT21139 Bearing thrust pair 2 NRE27353 Bearing main pair 1 NAT21132 Bearing thrust pair 2 NRE27360 Bearing main pair 1 NAT21134 Bearing thrust pair 2 NRE27368 Bearing main pair 1 NAT21136 Bearing thrust pair .030 Flanged, .030 3 3 2595A 2595A 10 Bearing rod pair Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length .010 3 2595A 20 Bearing rod pair .020 3 2595A 30 Bearing rod pair .030 3 NT23471 Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 .010 Flanged, .010 .020 Flanged, .020 GASKET & SEALS 1 HS3506 Set cylinder head [RE40428] 1 CS3800 Set conversion Does not include crank seals: Order NAR67942, NRE44574 1 1 NAR67942 NRE44574 Seal crankshaft front Seal crankshaft rear seal with sleeve 1 NR97341 Gasket oil pan 1 R119359 Gasket oil pan 1 NR97356 Gasket cylinder head 1 1 NR75729 TCS45614 Gasket valve cover Set front cover For use with steel pan CAMSHAFT 6 1 NT20073 NR81513 Lifter Tach drive shaft 1 NR81514 Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded VALVE TRAIN 3 2111940 Valve intake 3 2111943 Valve exhaust 1.772 head dia, 5.312 length, 0.372 stem dia, 45 degree, 2G 1.457 head dia, 5.322 length, 0.372 stem dia, 45 degree, 1G 3 01305S Valve exhaust 1.457 head dia, 5.322 length, 0.3720 stem dia, 0.2725 tip to grv, 45 deg 1G, stellite 6 12 NR26125 NT20077 Valve spring Valve lock 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NR87627 Valve seal Oring Endurance Power Products JD164-4 (800) 467-5545 John Deere 164 / 2.7L Gas (Continued) 6 140-7248 6 3 3 3 Cylinder Bore 4.020 Stroke 4.328 Piston: T30014 Valve guide 0.3750 ID, 0.5640 OD, 2.750 length, plain, 1-SR, iron (optional, recommended) 140-9115 Valve guide 0.3750 ID, 0.5020 OD, 2.750 length, plain, 1-SR, iron (spiral ID conversion guide) SB1812-4 SB1562-4 Valve insert Valve insert Intake, 1-9/16 ID, 1-13/16 OD, 7/32 depth, 45 degree Intake, 1-5/16 ID, 1-9/16 OD, 1/4 depth, 45 degree, use with 1.480 valve head dia COOLING SYSTEM 1 WPUMP1 AT22962 WATER PUMP Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog 160 degree, heavy-duty service 1 NRE33705 Thermostat 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 1 AT22963 Thermostat 192 degree Endurance Power Products JD164-4 (800) 467-5545 John Deere 4 Cylinder Bore 3.875 Stroke 3.500 165 / 2.7L Diesel Cylinder liner plate Tractor: 2010 Piston: T19063 Crawler: 2010 CYLINDER KIT 4 1 9259KX 5832KX Ring set Ring set 3.6250 bore, (2) 3/32, (1) 3/16 [2 cyl set] 3.6250 bore, (3) 3/32, (1) 3/16 [2 cyl set] BEARINGS 1 4145M Bearing main set 2010 machine s/n -> 29,000 1 4345M Bearing main set 2010 machine sn 29,001 -> 4 2595A Bearing rod pair Std, full groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 4 2599Y20 Bushing con rod 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] 1 1251M Bearing cam set Set of 3 bearings Std, half groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length GASKET & SEALS 1 FS3243VX Set overhaul 1 1 HS3243VX OS20767 Set cylinder head Gasket oil pan 1 46328SF Seal crankshaft front 1.500 shaft, 2.381 OD, 0.500 width 1 46757 Seal crankshaft rear 3.750 shaft, 4.757 OD, 0.375 width Valve intake [OEM] Valve intake [OEM] [repl T15686 when also order T30118 locks] Valve exhaust [OEM] Valve exhaust [OEM] [repl T15685 when also order T30118 locks] Valve guide [OEM] Valve guide 0.3440 ID, 0.6270 OD, 2.875 length, stepped [T15683] Valve spring 2.125 free length, 1.125 OD; 1.656@55, 1.256@107 [T167T] VALVE TRAIN 4 T12873 esn -> 10,719 4 T30119 esn 10,720 -> 4 T11217 esn -> 10,719 4 T30120 esn 10,720 -> 8 T11211 esn -> 10,719 8 2173896 esn 10,720 -> 8 2121114 16 2165081 Valve lock 16 4 T30118 SB1687-2 Valve lock Valve insert 4 SB1437-3N Valve insert Intake Exhaust, 1-3/16 ID, 1-7/16 OD, 7/32 depth WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog use with T30119 and T30120 valves COOLING SYSTEM WPUMP1 Endurance Power Products JD165-1 (800) 467-5545 Endurance Power Products JD165-1 (800) 467-5545 John Deere 165 / 2.7L Gas Cylinder liner plate 4 Cylinder Bore 3.875 Stroke 3.500 Combine: 45 CYLINDER KIT 2 2C7118 Ring set 3.6250 bore, (3) 3/32, (1) 3/16 [2 cyl set] 2010 sn -> 29018 BEARINGS 1 4344M Bearing main set Std, half groove brgs, 2.9974/2.9984 shaft, 3.1910/3.1920 hsg bore, 1.161 and 1.498 length 4 4 2595A 2599Y20 Bearing rod pair Bushing con rod Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] 1 1251M Bearing cam set Set of 3 bearings Set overhaul Felpro set fits: 115G, 145G from sn 30,001, 165G GASKET & SEALS 1 FS8145PT-1 1 HS3243VY Set cylinder head 1 1 CS3243VC VS38116 Set conversion Gasket valve cover 1 OS20766 Gasket oil pan 1 1 46757 46328SF Seal crankshaft rear Seal crankshaft front 3.750 shaft, 4.757 OD, 0.375 width 1.500 shaft, 2.381 OD, 0.500 width WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD165-2 (800) 467-5545 Endurance Power Products JD165-2 (800) 467-5545 John Deere 2 Cylinder Bore 4.500 Stroke 5.500 175 / 2.9L Gas Tractor: B, BN, BW: sn 60,000 - 200,999 [Styled early]; BO, BR: sn 329,000 -> CYLINDER KIT 1 2C7733 Ring set 4.500 bore; (3) 3/16, (1) 3/16 [2 cyl set] BEARINGS 1 4044M Bearing main set B sn 152,375 -> ; BR, BO: s/n 333,125 -> 2 2180CP Bearing rod pair For engines with insert type bearings 2 9759 Bushing con rod Std, 2.2480/2.500 shaft, 2.4680/2.4690 hsg bore, 2.536 and 2.737 length [(1) 2181CP, (1) 2182CP] Std, 2.7485/2.7500 shaft, 2.900/2.9010 hsg bore, 1.485 length 1.750 ID, 1.895 OD, 2.500 length GASKET & SEALS 1 FS7513S Set overhaul B: sn 96,000 - 200,999 1 AB3875R Set cylinder head B: sn 60,000 - 95,999; BR, BO: sn 329,000 - 337,514 1 HS7513S Set cylinder head B: sn 96,000 - 200,999 1 7513S Gasket cylinder head B: sn 96,000 - 200,999 [OEM] [AB3876R] VALVE TRAIN JDBVALVES1 NOTE EARLY; B: sn -> 95,999; BR, BO: s/n 329,000 -> 2 B362R Valve intake [OEM] 2 4 B2878R B358R Valve exhaust Valve guide [OEM] [OEM] 8 NB367R Valve lock 4 B365R Valve spring [OEM] JDBVALVES2 NOTE LATE; B: sn 96,000 -> 2 2 2111106 2111155 Valve intake Valve exhaust [B2863R, B1792R] [B2503R, B1793R] 4 2173600 Valve guide 0.4390 ID, 0.8770 OD, 3.875 length, stepped [B1927R] 8 2165142 Valve lock 4 B1794R Valve spring Intake all; Exhaust without rotator 2 B3331R Valve spring used on Exhaust with rotoator [OEM] [OEM] COOLING SYSTEM WPUMP1 WATER PUMP Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog JD175-1 (800) 467-5545 Endurance Power Products JD175-1 (800) 467-5545 John Deere 3 Cylinder Bore 4.19 Stroke 4.33 179D Diesel Rod: R51727, R80034 Piston: RE19282 Tractor: 840, 940, 1040, 1140, 1350, 1550, 1630, 1750, 1850; 2040 sn 350,000 -> ; 2150, 2155, 2240, 2250, 2255, 2345, 2355, 5000 European Tractor: 1020, 1445, 1445F, 1745, 1745F, 1750V, 1845, 1845F, 1850F, 1850N, 1850V, 2345F Loader Backhoe: JD310 European Crawler Dozer: 350D, 355D; 350C European Combine European: 925, 932 ENGINE KITS RP241 Overhaul kit Rod bolts in kit NR80033 for rod# R80034 RP835 Saran built engines RP235 Overhaul kit Low ring; Rod bolts in kit NR80033 for rod# R80034 InFrame kit Rod bolts in kit NR80033 for rod# R80034 RP829 InFrame kit Saran built engines RP606 Underhaul kit Rod bolts in kit NR74914 for rod# R51727 RP610 Underhaul kit Rod bolts in kit NR80033 for rod# R80034 Low ring; Rod bolts in kit NR80033 for rod# R80034 CYLINDER KIT 3 NRE30250 Cylinder kit 3 NRE19282 Piston body High ring [NRE19282 pist, NR125754 pin, NM41029 ret, NRE66820 ring, NR116281 liner, NAR65507] 3 NRE24458 Saran built engines 3 NRE11509 Cylinder kit Low ring [NRE11509 pist, NR125754 pin, NM41029 ret, NRE66820 rings, NR116281 liner, NAR65507] Piston Low ring 3 NR125754 Piston pin 6 3 NM41029 NRE66820 Retainer piston pin Ring set 3 NR116281 Cylinder liner 3 3 NAR65507 NRE500023 Cylinder liner oring kit Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 BEARINGS 3 NRE27352 Bearing main pair Standard NRE27353 Bearing main pair .010 NRE27360 NRE27368 Bearing main pair Bearing main pair .020 .030 NAT21139 Bearing thrust pair Flanged, std NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Flanged, .010 NAT21136 Bearing thrust pair NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair NAR81789 Bearing thrust pair NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 3 1 NAR95932 3 NRE27348 Std, use with flangeless thrust Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 1 1 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 NRE27364 Bearing rod pair .030 3 3 NR55647 NR55647S Bushing con rod Bushing con rod Honable, for 1.37 pin, use with rod cast# R51727, R80034 Borable, for 1.37 pin, optional useage for honable 1 NT20034 Bushing idler upper 1 NT26321 Bushing idler lower Set overhaul Does not include crank seals GASKET & SEALS 1 NRE38853 Endurance Power Products JD179-1 (800) 467-5545 John Deere 179D Diesel (Continued) 3 Cylinder Bore 4.19 Stroke 4.33 Rod: R51727, R80034 Piston: RE19282 1 NRE38850 Set cylinder head 1 RP681 Set conversion Add to pan & head sets to create complete OH set 1 1 RP340 NR97356 Set oil pan Gasket cylinder head Includes oil pump installation gaskets 1 NR75729 Gasket valve cover 1 1 NR97341 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear seal with sleeve CAMSHAFT 1 RE55900 Camshaft kit [OEM] Camshaft with lifters 6 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD332 Valve kit Intake 45 deg, Exhaust 45 deg; 3 retainers, 3 rotators 3 3 NR79624 NR89226 Valve exhaust Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 3 NR79623 Valve intake 3 3 NR51734 RP223 Valve insert Valve insert 12 NT20077 Valve lock Valve spring Retainer valve spring 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 45 degree 6 NR26125 3 NR41412 Intake 3 NRE11410 Exhaust 6 NR87627 Valve seal 6 NT20129 Valve stem cap 14 14 R53223 T20168 Bolt cylinder head Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 14 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Rotocap Oring CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 3 ERE21076 ER55978 Connecting rod Connecting rod Remanufactured: Cast# R80034 Remanufactured: Cast# R51727 6 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 6 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR62979K NRE61767 Oil pump kit Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 RP386 Oil cooler installation kit 6 plate FUEL / INJECTOR 3 NAR89564 Injector 3 EAR89564 Injector 3 RP588 Injector line connector ki Threaded nut type 3 1 NR66090 NRE42211 Tube return line Fuel transfer pump Endurance Power Products New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type Includes NR97350 mounting gasket JD179-1 (800) 467-5545 John Deere 179D Diesel (Continued) 3 Cylinder Bore 4.19 Stroke 4.33 Rod: R51727, R80034 Piston: RE19282 COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog Endurance Power Products JD179-1 (800) 467-5545 Endurance Power Products JD179-1 (800) 467-5545 John Deere 3 Cylinder Bore 4.19 Stroke 4.33 179T Diesel Tractor: 1950, 2355N Rod: R58979, R80032, R116312 Piston: RE19278 European Tractor: 1950F, 1950N ENGINE KITS RP244 RP238 Overhaul kit InFrame kit Rod bolts in kit NR80033 for rod# R80032, R113612 Rod bolts in kit NR80033 for rod# R80032, R113612 RP610 Underhaul kit Rod bolts in kit NR80033 for rod# R80032, R113612 RP606 Underhaul kit Rod bolts in kit NR74194 for rod# R58979 CYLINDER KIT 3 NRE33115 Cylinder kit 3 NRE19278 Piston body 3 6 NR124230 NR54114 Piston pin Retainer piston pin 3 NRE66820 Ring set 3 3 NR116281 NAR65507 Cylinder liner Cylinder liner oring kit 3 NRE500023 Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 [NRE19278 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR116281 liner, NAR65507] BEARINGS 3 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 Bearing thrust pair Flanged, std NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Flanged, .010 Flanged, .020 NAT21136 Bearing thrust pair Flanged, .030 NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 3 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 3 NRE27364 NR57451 Bearing rod pair Bushing con rod .030 Honable, use w/ rod cast# R56187, R80032 3 NR57451S Bushing con rod Borable, Optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper 1 1 .020 .030 lower GASKET & SEALS 1 1 NRE38853 NRE38850 Set overhaul Set cylinder head Does not include crank seals 1 RP681 Set conversion Add to pan & head sets to create complete OH set 1 1 RP340 NR97356 Set oil pan Gasket cylinder head Includes oil pump installation gaskets 1 NR75729 Gasket valve cover 1 1 NR97341 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear Endurance Power Products seal with sleeve JD179-2 (800) 467-5545 John Deere 179T Diesel (Continued) 3 Cylinder Bore 4.19 Stroke 4.33 Rod: R58979, R80032, R116312 Piston: RE19278 CAMSHAFT 1 RE55900 Camshaft kit [OEM] Camshaft with lifters 6 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 HKJD334 Valve kit Intake 30 deg, Exhaust 45 deg; 3 retainers, 3 rotators 3 3 NR79624 NR89226 Valve exhaust Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 3 NR83071 Valve intake .372 stem dia; 30 degree 3 3 NR51734 NR73064 Valve insert Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 12 NT20077 Valve lock 6 NR26125 3 NR41412 Intake 3 NRE11410 Exhaust 6 NR87627 Valve spring Retainer valve spring Valve seal 6 14 NT20129 R53223 Valve stem cap Bolt cylinder head 14 T20168 Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 14 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Rotocap Oring CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 3 NRE42733 ERE16494 Connecting rod Connecting rod New; Cast# R113612 [also works for cast# R80032] Remanufactured: Cast# R80032 6 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 Oil pump Oil pump with 1.625 gear, housing marked R54615 OIL / LUBE SYSTEM 1 NRE55343 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NRE61767 Oil cooler 6 plate New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 FUEL / INJECTOR 3 NAR89564 Injector 3 3 EAR89564 RP588 Reman, pencil type Injector Injector line connector ki Threaded nut type 3 NR66090 Tube return line 1 NRE42211 Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog TURBOCHARGER New or remanufactured available, call for pricing COOLING SYSTEM TURBO / AIR TURBO Endurance Power Products JD179-2 (800) 467-5545 John Deere 4 Cylinder Bore 3.860 Stroke 3.860 180 / 3.0L Gas Tractor: 2020, 2510 Industrial Tractor: JD400 Combine: 45 Piston: T23504 Crawler: JD450 CYLINDER KIT 3.8583 bore, 2 seal ring grooves on liner, Sold as assembly only 4 SL-2689 Cylinder kit 2020 esn -> 159,926; 2510 blk# T23405, T24960, T26932; JD400 Early Industrial tractor; JD450 Early Crawler; 45 Combine esn -> 159,956 3.8583 bore, no seal ring grooves on liner, Sold as assembly only 4 SL-2688 Cylinder kit 2020 esn 159,927 -> ; 2510 blk# T32349; JD400 Late Industrial tractor; JD450 Late Crawler; 45 Combine esn 159,957 -> 4 2242023 Piston 3.86 bore, 2.135 CD, 3.750 length, cup 0.213 x 2.47, 1.1878 pin, cup; (2) 3/32, (1) 0.197 [T23504] 4 S40726 Ring set 3.8600 bore; (2) 3/32, (1) 0.197 [1 cyl set] Grv on slv; 3.86 bore, 4.8415 x 0.238 flange, 4.450 barrel, 4.2365 seal OD, 4.5285 pilot OD [AR52252] 4 2264444 Cylinder liner kit 2020 esn -> 159,926; 2510 blk# T23405, T24960, T26932; JD400 Early Industrial tractor; JD450 Early Crawler; 45 Combine esn -> 159,956 Grv in blck; 3.86 bore, 4.8385 x 0.238 flange, 4.440 barrel, 4.2365 seal OD, 4.5285 pilot OD [T32350] 4 2264463 Cylinder liner kit 2020 esn 159,927 -> ; 2510 blk# T32349; JD400 Late Industrial tractor; JD450 Late Crawler; 45 Combine esn 159,957 -> 4 2237164 Cylinder liner oring kit 3 seal rings, for liner with 2 grooves 4 2237163 Cylinder liner oring kit 3 seal rings, for liner with no grooves BEARINGS 2 NRE27352 Bearing main pair Standard 1 NAT21139 Bearing thrust pair Flanged, std 2 NRE27353 Bearing main pair .010 1 NAT21132 Bearing thrust pair Flanged, .010 2 NRE27360 Bearing main pair .020 1 NAT21134 Bearing thrust pair Flanged, .020 2 NRE27368 Bearing main pair .030 1 NAT21136 Bearing thrust pair Flanged, .030 4 2595A Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 4 2595A 10 Bearing rod pair .010 4 4 2595A 20 2595A 30 Bearing rod pair Bearing rod pair .020 .030 4 2599Y20 Bushing con rod 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] GASKET & SEALS 1 260-1386 Set overhaul Complete, includes rear main seal and wear slv; early style rear seal not included [RE38559] 1 1 HS3800 CS3800 Set cylinder head Set conversion [RE38565] 1 Does not include crank seals: Order NAR67942, NRE44574 seal with sleeve NAR67942 Seal crankshaft front [OEM] Use with T22991 housing; face type seal 1 T20326 Seal crankshaft rear 2020 esn -> 36,137; 2510 esn -> 47,545; JD400 sn -> 36,276; JD450: sn -> 37,866; JD480 sn -> 36,617 1 NRE44574 Seal crankshaft rear 1 NR97342 Gasket oil pan 1 R119360 Gasket oil pan 1 NR98461 Gasket cylinder head 1 1 NR73521 TCS45614 Gasket valve cover Set front cover Endurance Power Products For use with steel pan JD180-1 (800) 467-5545 John Deere 180 / 3.0L Gas (Continued) 4 Cylinder Bore 3.860 Stroke 3.860 Piston: T23504 CAMSHAFT 1 NR82820 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 8 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN 4 2111940 Valve intake 1.772 head dia, 5.312 length, 0.372 stem dia, 45 degree, 2G 4 2111943 Valve exhaust 1.457 head dia, 5.322 length, 0.372 stem dia, 45 degree, 1G 4 8 01305S NR26125 Valve exhaust Valve spring 1.457 head dia, 5.322 length, 0.3720 stem dia, 0.2725 tip to grv, 45 deg 1G, stellite 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 16 NT20077 Valve lock 8 8 NR87627 140-7248 Valve seal Valve guide Oring 0.3750 ID, 0.5640 OD, 2.750 length, plain, 1-SR, iron (optional, recommended) 8 140-9115 Valve guide 0.3750 ID, 0.5020 OD, 2.750 length, plain, 1-SR, iron (spiral ID conversion guide) 4 4 SB1812-4 SB1562-4 Valve insert Valve insert Intake, 1-9/16 ID, 1-13/16 OD, 7/32 depth, 45 degree Intake, 1-5/16 ID, 1-9/16 OD, 1/4 depth, 45 degree, use with 1.480 valve head dia New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM 1 WPUMP1 AT22962 WATER PUMP Thermostat 1 NRE33705 Thermostat 160 degree, heavy-duty service 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 1 AT22963 Thermostat 192 degree Endurance Power Products JD180-1 (800) 467-5545 John Deere 2 Cylinder Bore 4.6875 Stroke 5.500 190 / 3.1L Gas Tractor: B, BN, BW: sn 201,000 -> [Styled late]; 50, 520, 530 CYLINDER KIT 2 BPISTON1 2243024045 NOTE Rebore kit Following is for: B sn 201,000 ->; Model 50 4.6875 std bore, 0.045 oversize; Piston, rings, pin, retainers [2243021045 piston, S70438045 rings] 2 2243024090 Rebore kit 4.6875 std bore, 0.090 oversize; Piston, rings, pin, retainers [2243021090 piston, S70438090 rings] 2 2243021045 Piston 4.6875 std bore, 0.045 oversize; 4.250 CD, 6.625 length, 1.417 pin, cup; (4) 3/16, (1) 5/16 2 2243021090 Piston 4.6875 std bore, 0.090 oversize; 4.250 CD, 6.625 length, 1.417 pin, cup; (4) 3/16, (1) 5/16 2 S70438 Ring set except 50 sn 5015950 -> 2 S70438045 Ring set 2 S70438090 Ring set 4.6875 bore; (4) 3/16, (1) 5/16 [1 cyl set] 1 Ring set .125; (4) 3/16, (1) 5/16 [2 cyl set] Ring set 4.875 bore; (4) 1/8, (1) 1/4 [2 cyl set] BPISTON2 NOTE 1 SP144045 Rebore kit Following is for: Model 520, 530 4.875 std bore, 0.045 oversize; Piston, rings, pins, retainers [2 cyl set] 1 1 SP144090 SP144125 Rebore kit Rebore kit 4.875 std bore, 0.090 oversize; Piston, rings, pins, retainers [2 cyl set] 1 1 2C7100 2C7100 045 Ring set Ring set 4.875 bore; (4) 1/8, (2) 1/4 [2 cyl set] 1 2C7100 090 Ring set .045 oversize; (4) 1/8, (2) 1/4 [2 cyl set] .090 oversize; (4) 1/8, (2) 1/4 [2 cyl set] 1 2C7100 125 Ring set .125 oversize; (4) 1/8, (2) 1/4 [2 cyl set] 2C4965 120 1 2C7641 for 50 sn 5015950 -> .045; (4) 3/16, (1) 5/16 [1 cyl set] .090; (4) 3/16, (1) 5/16 [1 cyl set] 4.875 std bore, 0.125 oversize; Piston, rings, pins, retainers [2 cyl set] BEARINGS 1 4044M Bearing main set For Model B Series only 2 2180CP Bearing rod pair For Model B Series, and 50 Series 2 2755CP Bearing rod pair For 520 and 530 2 9759 Bushing con rod Std, 2.2480/2.500 shaft, 2.4680/2.4690 hsg bore, 2.536 and 2.737 length [(1) 2181CP, (1) 2182CP] Std, 2.7485/2.7500 shaft, 2.900/2.9010 hsg bore, 1.485 length Std, 2.8740/2.8750 shaft, 3.0250/3.0260 hsg bore, 1.485 length 1.750 ID, 1.895 OD, 2.500 length GASKET & SEALS 1 FS7513S For: B Series 1 FS3023 For: 50 series except LPG 1 AB5363R For: 520, 530 1 HS7513S For: B Series 1 HS3023 For: 50 series except LPG 1 HS7402S For: 520, 530 1 7513S For: B Series Set overhaul Set overhaul Does not include crankshaft seals Set overhaul [OEM] Set cylinder head [AB3876R] Set cylinder head For B Series Set cylinder head Gasket cylinder head VALVE TRAIN JDBVALVES3 NOTE Endurance Power Products Valve parts applications for: B Series, 50 Series JD190-1 (800) 467-5545 John Deere 190 / 3.1L Gas (Continued) 2 Cylinder Bore 4.6875 Stroke 5.500 2 2111106 Valve intake [B2863R, B1792R] 2 2111155 Valve exhaust [B2503R, B1793R] 4 8 2173600 2165142 Valve guide Valve lock 0.4390 ID, 0.8770 OD, 3.875 length, stepped [B1927R] 2 2188623 For B, 50 2 2187543 For B, 50 Valve insert Intake Valve insert Exhaust WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD190-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.000 Stroke 4.000 201 / 3.3L Gas Block: R26150 Tractor: 3010 ENGINE KITS JD-3010-G1-IF JD-3010-G1-OF InFrame kit Overhaul kit 3010 Gas: Standard 4.000 bore; SL-2084 cylinder kit 3010 Gas: Standard 4.000 bore; SL-2084 cylinder kit JD-3010-G2-IF JD-3010-G2-OF InFrame kit Overhaul kit 3010 Gas: Overbore to 4.1875; AR52548 cylinder kit 3010 Gas: Overbore to 4.1875; AR52548 cylinder kit JD-3010-LPG Overhaul kit 3010 LP; Call for price and availability CYLINDER KIT 4 SL-2084 Cylinder kit 4.0000 bore, 4.620 barrel, 5.062 flange [2084P, SO-2084, 5834KX] Being discontinued: Use AR52548 4 AR52548 Cylinder kit 4.1875 bore, 4.620 liner barrel, 5.062 flange dia [2421P, SO-2421, 9597KX] 4 2084P Piston Discontinued, 4.0000 bore, 2.704 CD, D shaped dish, 7.8:1 CR; (3) 3/32, (2) 1/4 [R26089, R42186] 4 2421P Piston Discontinued, 4.1875 bore, 2.701 CD, 4.620 length, 1.250 pin dia; (3) 3/32, (2) 1/4 2 5834KX Ring set 4.0000 bore; (3) 3/32, (2) 1/4 [2 cyl set] [OE AR27851] 2 9597KX Ring set 4.1875 bore; (3) 3/32, (2) 1/4 [2 cyl set] 4 SO-2084 Cylinder liner kit 4.0000 bore; 5.062 x 0.252 flange, 4.812 pilot, 8.000 length; (2) SLR-2023 [R26118] 4 SO-2421 Cylinder liner kit 4.1875 bore; 5.062 x 0.252 flange, 4.813 pilot, 8.000 length; (2) SLR-2023 BEARINGS JDBRG1 2 1 NAR49243 NAR77754 1 Upper and Lower halves: offset tangs Bearing main pair Bearing thrust pair Standard NAR77747 Flangeless, Standard Thrust washer set main Standard 2 1 NAR49245 NAR77756 Bearing main pair Bearing thrust pair .010 Flangeless, .010 2 1 NAR49246 NAR77757 Bearing main pair Bearing thrust pair .020 Flangeless, .020 2 1 NAR49247 NAR77758 Bearing main pair Bearing thrust pair .030 Flangeless, .030 1 NAR77753 Thrust washer set main .007 O/S 4 NAR45723 Bearing rod pair Standard 4 4 NAR46396 NAR46397 Bearing rod pair Bearing rod pair .010 .020 4 NAR46398 Bearing rod pair .030 3 NR46903 Bearing cam 4 3129YA20 Bushing con rod 1.252 ID, 1.3755 OD, 1.510 length GASKET & SEALS 1 260-1390 Set overhaul Includes crankshaft seals 1 1 HS3217VY CS3850 Set cylinder head Set conversion [OE: AR53028] 1 NAR49025 Seal crankshaft front Includes wear sleeve Endurance Power Products Does not include crankshaft seals JD201-1 (800) 467-5545 John Deere 201 / 3.3L Gas (Continued) 4 Cylinder Bore 4.000 Stroke 4.000 1 NRE22764 Seal crankshaft rear 1 1 NR49865 NR83020 2 NR83021 Gasket valve cover Gasket manifold exhaust Double Gasket manifold exhaust Single 1 1 TCS45492 NAR30544 Set timing cover Set oil pan Block: R26150 Includes wear sleeve Includes oil pump installation gaskets CAMSHAFT 1 8 NAR32730 NR26342 Camshaft kit Lifter [NR46427 cam, NR32428 oil pump gear] Uses 20 tooth tach drive R32426 (original cams used 15 tooth) 8 ER26342 Lifter Remanufactured Valve intake 1.688 head dia, 5.700 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26109] VALVE TRAIN 4 00659 4 00658 Valve exhaust 1.500 head dia, 5.731 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26108] 8 8 140-1897 2121111 Valve guide Valve spring 0.3745 ID, 0.6255 OD, 2.938 length, 11-P 2.156 free, 1.250 OD; 1.812@33, 1.375@90 16 NB367R Valve lock 4 4 AR26336 SB1750-2 Rotator Valve insert 4 SB1562-1N Valve insert Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree, use with 1.680 valve head dia. Exhaust: 1-5/16 ID, 1-9/16 OD, 7/32 depth COOLING SYSTEM 1 WPUMP1 WATER PUMP NR36846 Thermostat Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog 180 degree, 63mm JD201-1 (800) 467-5545 John Deere 4 Cylinder Bore 3.86 Stroke 4.33 202 Early Diesel Orings on liner; esn -> 158257 Block: T23406, T24961, T26933 Rod: T20007 Piston: T23481 Tractor: 2020, 2510 Crawler dozer: JD450 Forklift: JD480 Loader backoe: JD400, JD401 Skidder: JD440: Dubuque msn -> 44,999; Welland msn -> 19,999 ENGINE KITS RP282 Overhaul kit RP279 InFrame kit RP607 Underhaul kit CYLINDER KIT 4 RP264 Cylinder kit 4 4 NT23481 NT23482 Piston body Piston pin 8 NR51112 Retainer piston pin 4 4 NAR70633 NAR51902 Ring set Cylinder liner Liner (NR48635) with orings 4 RP633 Cylinder liner oring kit 3 seal rings, for liner with 2 grooves NRE27352 Bearing main pair Standard NRE27353 Bearing main pair .010 NRE27360 NRE27368 Bearing main pair Bearing main pair .020 NAT21139 Bearing thrust pair NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair NAT21136 Bearing thrust pair NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair NAR81789 Bearing thrust pair Bearing thrust pair Thrust washer main Flangeless, .030 3 NAR81790 NR78598 1 NAR95932 4 NRE27348 Std, use with flangeless thrust Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 Grooves on liner [NT23481 pist, NT23482 pin, NR51112 ret, NAR70633 ring, NAR51902 liner, RP633] BEARINGS 4 1 1 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 NRE27364 Bearing rod pair .030 4 4 NT23471 NT23471S Bushing con rod Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 Borable, for 1.19 pin, optional useage for honable 1 NT20034 Bushing idler upper 1 6 NT26321 NR57160 6 NR91708 lower Bushing idler Bushing balancer shaft Bushing balancer shaft Oversize OD GASKET & SEALS 1 NRE501570 Set overhaul 1 NRE38847 Set cylinder head 1 1 RP341 RP682 Set oil pan Set conversion 1 NR98461 Gasket cylinder head 1 1 NR73521 NR97342 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear (Do not use w/ flywheel hsg# T20300, T22991) Endurance Power Products Does not include crank seals (Replaces NRE38558) Includes oil pump installation gaskets Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 seal with sleeve JD202-1 (800) 467-5545 John Deere 4 Cylinder Bore 3.86 Stroke 4.33 202 Early (Continued) Diesel Orings on liner; esn -> 158257 Block: T23406, T24961, T26933 Rod: T20007 Piston: T23481 CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 NR82820 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded 1 1 NR81514 NAR61351 Tach drive shaft Balancer shaft Helical gear style, 12 tooth; threaded RH assembly [NR54054 shaft, gear, key] 1 NAR61352 Balancer shaft LH assembly [NR54054 shaft, gear, key] NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD340 Valve kit Intake 45 deg, Exhaust 45 deg; 8 retainers 4 4 NR79624 NR79623 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 4 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 4 16 RP223 NT20077 Valve insert Valve lock Intake, 45 degree 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 8 NR41412 Intake & Exhaust 8 NR87627 Retainer valve spring Valve seal 8 18 NT20129 T20183 Valve stem cap Bolt cylinder head 18 R53223 Bolt cylinder head 1/2 x 4 [check length for proper bolts] 1/2 x 4-1/4 [check length for proper bolts] 18 T20168 Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 Crankshaft Marked T23517; Flange: flat, 4 bolt, 1 dowel; Snout: 1 threaded hole, no splines, 1 keyway Connecting rod Bolt connecting rod Remanufactured: Cast# T20007 Use with rod casting# R51727, R58979, R81410, T20007 Oil pump Oil pump kit Oil pump with 1.625 gear, housing marked R54615 For pump with 1.625 gear, housing marked R54615 (replaces RP248) Injector Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type Oring CRANKSHAFT 1 NAT18030 CONNECTING ROD 4 8 EAT18005 NR74194 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K FUEL / INJECTOR 4 4 NAR89564 EAR89564 4 NAT27622 Engine s/n 106892 -> 4 NT23425 Engine s/n -> 106891 8 NR34766 Engine s/n -> 106891 1 NRE42211 Injector line connector ki Hose barb type Boot injector Tee leak-off boot Clamp leak off line boot Fuel transfer pump Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM WPUMP1 WPUMP2 Endurance Power Products JD202-1 (800) 467-5545 John Deere 4 Cylinder Bore 3.86 Stroke 4.33 202 Late Diesel Orings in block; esn 158258 -> Tractor: 2020, 2510 Crawler dozer: JD450 Forklift: JD480 Block: R53230, R53250, R55034, R72973, T32342 Rod: T20007 Piston: T23481 Loader backoe: JD400, JD401 ENGINE KITS RP262 RP169 Overhaul kit InFrame kit RP607 Underhaul kit CYLINDER KIT 4 NAR71591 Cylinder kit 4 NT23481 Piston body 4 8 NT23482 NR51112 Piston pin Retainer piston pin 4 NAR70633 Ring set 4 4 NT32340 NAR71617 Cylinder liner Cylinder liner oring kit 4 NT324340K Cylinder liner Liner with orings [NT32340, NAR71617] NR46905 Cylinder liner shim .004 Grooves in blk [NT23481 pist, NT23482 pin, NR51112 ret, NAR70633 ring, NT32340 liner, NAR71617] BEARINGS 4 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair 3 NR78598 Thrust washer main 1 NAR95932 4 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 4 NRE27364 NT23471 Bearing rod pair Bushing con rod .030 Honable, for 1.19 pin, use with rod cast# R81410, T20007 4 NT23471S Bushing con rod Borable, for 1.19 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 6 NR57160 Bushing balancer shaft 6 NR91708 Bushing balancer shaft Oversize OD 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 Std, use with flangeless thrust GASKET & SEALS 1 NRE501570 Set overhaul Does not include crank seals (Replaces NRE38558) 1 1 NRE38847 RP341 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP682 Set conversion Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 1 NR98461 NR73521 Gasket cylinder head Gasket valve cover 1 NR97342 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front seal with sleeve 1 NRE44574 Seal crankshaft rear (Do not use w/ flywheel hsg# T20300, T22991) Endurance Power Products JD202-2 (800) 467-5545 John Deere 4 Cylinder Bore 3.86 Stroke 4.33 202 Late (Continued) Diesel Orings in block; esn 158258 -> Block: R53230, R53250, R55034, R72973, T32342 Rod: T20007 Piston: T23481 CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 NR82820 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded 1 1 NR81514 NAR61351 Tach drive shaft Balancer shaft Helical gear style, 12 tooth; threaded RH assembly [NR54054 shaft, gear, key] 1 NAR61352 Balancer shaft LH assembly [NR54054 shaft, gear, key] NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD340 Valve kit Intake 45 deg, Exhaust 45 deg; 8 retainers 4 4 NR79624 NR79623 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 4 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 4 16 RP223 NT20077 Valve insert Valve lock Intake, 45 degree 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 8 NR41412 Intake & Exhaust 8 NR87627 Retainer valve spring Valve seal 8 18 NT20129 T20183 Valve stem cap Bolt cylinder head 18 R53223 Bolt cylinder head 1/2 x 4 [check length for proper bolts] 1/2 x 4-1/4 [check length for proper bolts] 18 T20168 Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 Crankshaft Marked T23517; Flange: flat, 4 bolt, 1 dowel; Snout: 1 threaded hole, no splines, 1 keyway Connecting rod Bolt connecting rod Remanufactured: Cast# T20007 Use with rod casting# R51727, R58979, R81410, T20007 Oil pump Oil pump kit Oil pump with 1.625 gear, housing marked R54615 For pump with 1.625 gear, housing marked R54615 (replaces RP248) Injector Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type Oring CRANKSHAFT 1 NAT18030 CONNECTING ROD 4 8 EAT18005 NR74194 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K FUEL / INJECTOR 4 4 NAR89564 EAR89564 4 NAT27622 1 NRE42211 Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog Endurance Power Products JD202-2 (800) 467-5545 John Deere 4 Cylinder Bore 3.860 Stroke 4.330 202 / 3.3L Gas Tractor: 2520 Combine: 3300 Piston: T24891 Backhoe loader: JD410 CYLINDER KIT 3.8600 bore, 3 sealing rings: 2 grooves on sleeve [2242026, S40726, 2264529] 4 2261525 Cylinder kit esn -> 157,353: Tractor 2520, Combine 3300; Backhoe JD410 early 3.8600 bore, 3 sealing rings: no grooves on sleeve [2242026, S40726, 2264528] 4 2261522 Cylinder kit esn 157,354 ->: Tractor 2520, Combine 3300; Backhoe JD410 late 4 2242026 Piston 3.8600 bore, 2.2535 CD, 4.000 length, 1.878 pin, cup, 7.6:1 CR; (2) 3/32, (1) 0.197 [T24891] 4 S40726 Ring set 3.8600 bore; (2) 3/32, (1) 0.197 [1 cyl set] Grv on slv; 3.860 bore, 4.8415 x 0.238 flange, 4.450 barrel, 4.2365 seal OD, 4.5293 pilot OD 4 2264529 Cylinder liner kit esn -> 157,353: Tractor 2520, Combine 3300; Backhoe JD410 early Grv in blck; 3.860 bore, 4.8410 x 0.238 flange, 4.440 barrel, 4.2360 seal OD, 4.5280 pilot OD 4 2264528 Cylinder liner kit esn 157,354 ->: Tractor 2520, Combine 3300; Backhoe JD410 late 4 2237164 Cylinder liner oring kit 3 seal rings, for liner with 2 grooves 4 2237163 Cylinder liner oring kit 3 seal rings, for liner with no grooves BEARINGS 2 NRE27352 Bearing main pair Standard 1 NAT21139 Bearing thrust pair Flanged, std 2 NRE27353 Bearing main pair .010 1 NAT21132 Bearing thrust pair Flanged, .010 2 NRE27360 Bearing main pair .020 1 NAT21134 Bearing thrust pair Flanged, .020 2 NRE27368 Bearing main pair .030 1 NAT21136 Bearing thrust pair Flanged, .030 4 2595A Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 4 2595A 10 Bearing rod pair .010 4 4 2595A 20 2595A 30 Bearing rod pair Bearing rod pair .020 .030 4 2599Y20 Bushing con rod 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] GASKET & SEALS 1 260-1386 Set overhaul Complete, includes rear main seal and wear slv; early style rear seal not included [RE38559] 1 1 HS3800 CS3800 Set cylinder head Set conversion [RE38565] 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear 1 NR97342 Gasket oil pan use with block marked R80407 1 R119360 Gasket oil pan use with block marked R72973 1 NR98461 Gasket cylinder head 1 1 NR73521 TCS45614 Gasket valve cover Set front cover Endurance Power Products Does not include crank seals: Order NAR67942, NRE44574 seal with sleeve For use with steel pan JD202-3 (800) 467-5545 John Deere 202 / 3.3L Gas (Continued) 4 Cylinder Bore 3.860 Stroke 4.330 Piston: T24891 CAMSHAFT 1 NR82820 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 8 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN 4 2111940 Valve intake 1.772 head dia, 5.312 length, 0.372 stem dia, 45 degree, 2G 4 2111943 Valve exhaust 1.457 head dia, 5.322 length, 0.372 stem dia, 45 degree, 1G 4 8 01305S NR26125 Valve exhaust Valve spring 1.457 head dia, 5.322 length, 0.3720 stem dia, 0.2725 tip to grv, 45 deg 1G, stellite 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 16 NT20077 Valve lock 8 8 NR87627 140-7248 Valve seal Valve guide Oring 0.3750 ID, 0.5640 OD, 2.750 length, plain, 1-SR, iron (optional, recommended) 8 140-9115 Valve guide 0.3750 ID, 0.5020 OD, 2.750 length, plain, 1-SR, iron (spiral ID conversion guide) 4 4 SB1812-4 SB1562-4 Valve insert Valve insert Intake, 1-9/16 ID, 1-13/16 OD, 7/32 depth, 45 degree Intake, 1-5/16 ID, 1-9/16 OD, 1/4 depth, 45 degree, use with 1.480 valve head dia New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM 1 WPUMP1 NRE33705 WATER PUMP Thermostat 1 AT22963 Thermostat Endurance Power Products 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 192 degree JD202-3 (800) 467-5545 John Deere 4 Cylinder Bore 3.625 Stroke 3.500 217 / 3.6L Gas Piston: T12382 Combine: 55, 65, 95 CYLINDER KIT 6 6 2241549 2241549040 Piston Piston 3.6250 bore, 2.250 CD, 4.000 length, 1.878 pin, flat head; (3) 3/32, (1) 3/16 [T12382] .040 6 S40370 Ring set 3.625 bore, Std, (3) 3/32, (1) 3/16 [1 cyl set] 6 S40370040 Ring set .040 BEARINGS 4 2595A Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 4 1 2599Y20 SH501S Bushing con rod Bearing cam set 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] Set of 4 bearings [(3) SH501, (1) SH500] GASKET & SEALS 1 FS3167 esn -> 40,000 1 FS3238 esn 40,001 -> 1 HS3167 esn -> 40,000 1 HS3238 esn 40,001 -> 1 VS39567 Set overhaul Set overhaul Set cylinder head Set cylinder head Gasket valve cover 1 46328SF Seal crankshaft front 1.500 shaft, 2.381 OD, 0.500 width 1 46757 Seal crankshaft rear 3.750 shaft, 4.757 OD, 0.375 width Valve intake 1.687 head dia, 4.670 length, 0.342 stem dia, 30 degree, 2G Valve exhaust 1.375 head dia, 4.680 length, 0.342 stem dia, 45 degree, 2G Valve exhaust 1.375 head dia, 4.780 length, 0.342 stem dia, 45 degree, 2G [T12357] Valve guide 0.3440 ID, 0.6270 OD, 2.375 length, stepped VALVE TRAIN 6 2111770 esn -> 40,000 6 2111771 esn -> 40,000 6 2111751 esn 40,001 -> 12 2173860 12 24 2121114 2165081 Valve spring Valve lock 2.125 free length, 1.125 OD; 1.656@55, 1.256@107 6 2187595 Valve insert Intake 6 2187439 Valve insert Exhaust WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD217-1 (800) 467-5545 Endurance Power Products JD217-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.02 Stroke 4.33 219 Early 1 Diesel 1.19 pin, orings on liner; esn -> 275483 Block: T26933 Rod: T20007 Piston: AR55984, RE53265 Tractor: 1830, 2030, 2120, 2510, 2520 Windrower: 2250, 2270, 2320, 2420 Cotton Picker/Stripper: 482, 499 Sprayer: 6000 Crawler dozer: JD450A, JD450B Crawler loader: 455D, JD455B, JD455C Forklift: JD480A Loader backhoe: 401A, 410 Knuckleboom Loader: 7610, 7622, 7640 Skidder: JD440A: Dubuque msn 50,000 - 103,129; Welland msn 20,000 - 21,152 ENGINE KITS RP293 Overhaul kit RP290 RP607 InFrame kit Underhaul kit CYLINDER KIT 4 4 RP288 NRE53265 Cylinder kit Piston body 4 NT26149 Piston pin 4 4 NR51112 NAR55759 Retainer piston pin Ring set 4 NAR51903 Cylinder liner 4 RP634 Cylinder liner oring kit Grooves on liner [NRE53265 pist, NT26149 pin, NR51112 ret, NAR55759 ring, NAR51903 liner, RP634] Liner (NR48636) with orings; 2 oring grooves on liner BEARINGS 4 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 4 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 4 NRE27364 NT23471 Bearing rod pair Bushing con rod .030 Honable, for 1.19 pin, use with rod cast# R81410, T20007 4 NT23471S Bushing con rod Borable, for 1.19 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 6 NR57160 Bushing balancer shaft 6 NR91708 Bushing balancer shaft Oversize OD 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 NRE501579 Set overhaul Does not include crank seals (Replaces NRE38857) 1 1 NRE38851 RP341 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP682 Set conversion Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 1 NR125863 NR73521 Gasket cylinder head Gasket valve cover 1 NR97342 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear Endurance Power Products seal with sleeve JD219-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.02 Stroke 4.33 219 Early 1 (Continued) Diesel 1.19 pin, orings on liner; esn -> 275483 Block: T26933 Rod: T20007 Piston: AR55984, RE53265 CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 NR82820 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded 1 1 NR81514 NAR61351 Tach drive shaft Balancer shaft Helical gear style, 12 tooth; threaded RH assembly [NR54054 shaft, gear, key] 1 NAR61352 Balancer shaft LH assembly [NR54054 shaft, gear, key] NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Valve kit Intake 45 deg, Exhaust 45 deg; 4 retainers, 4 rotators Valve kit Intake 30 deg, Exhaust 45 deg; 4 retainers, 4 rotators Valve kit Intake 30 deg, Exhaust 30 deg; 4 retainers, 4 rotators Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 4 NR89226 4 NR79623 Natural 4 NR83071 Turbo 4 NR51734 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G Valve intake .372 stem dia; 30 degree Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 4 RP223 Valve insert Intake, 45 degree 4 16 NR73064 NT20077 Valve insert Valve lock Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils VALVE TRAIN CYLHEAD 1 HKJD342 Natural 1 HKJD343 Turbo 1 HKJD344 Turbo 4 NR79624 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 4 NR41412 Intake 4 NRE11410 Exhaust 8 NR87627 Retainer valve spring Valve seal 8 NT20129 Valve stem cap 18 18 T20183 R53223 Bolt cylinder head Bolt cylinder head 18 T20168 Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 18 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] Crankshaft Marked T23517; Flange: flat, 4 bolt, 1 dowel; Snout: 1 threaded hole, no splines, 1 keyway Rotocap Oring 1/2 x 4 [check length for proper bolts] CRANKSHAFT 1 NAT18030 CONNECTING ROD 4 EAT18005 Connecting rod 8 NR74194 Bolt connecting rod Remanufactured: Cast# T20007 Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K Oil pump Oil pump kit Oil pump with 1.625 gear, housing marked R54615 For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NRE31929 Oil cooler 10 plate (Also order RP386 installation kit) FUEL / INJECTOR 4 NAR89564 Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 4 EAR89564 Injector Reman, pencil type 4 1 NAT27622 NRE42211 Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump Endurance Power Products JD219-1 (800) 467-5545 John Deere 219 Early 1 (Continued) Diesel 1.19 pin, orings on liner; esn -> 275483 4 Cylinder Bore 4.02 Stroke 4.33 Block: T26933 Rod: T20007 Piston: AR55984, RE53265 COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD219-1 (800) 467-5545 Endurance Power Products JD219-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.02 Stroke 4.33 219 Early 2 Diesel 1.19 pin, orings in block; esn -> 275483 Block: T32342 Rod: T20007 Piston: AR55984, RE53265 Tractor: 1830, 2030, 2120, 2510, 2520 Windrower: 2250, 2270, 2320, 2420 Cotton Picker/Stripper: 482, 499 Sprayer: 6000 Crawler dozer: JD450A, JD450B Crawler loader: 455D, JD455B, JD455C Forklift: JD480A Loader backhoe: 401A, 410, 410B Knuckleboom Loader: 7610, 7622, 7640 Skidder: JD440A/B: Dubuque msn 103,130 ->; Welland msn 21,153 -> ENGINE KITS RP203 Overhaul kit RP172 RP607 InFrame kit Underhaul kit CYLINDER KIT 4 4 NAR71593 NRE53265 Cylinder kit Piston body 4 NT26149 Piston pin 4 4 NR51112 NAR55759 Retainer piston pin Ring set 4 NR116463 Cylinder liner No seal grooves on liner 4 4 NAR71618 NR116463K Cylinder liner oring kit Cylinder liner kit 3 seal rings, for liner with no grooves Liner with orings [NR116463, NAR71618] NR46906 Cylinder liner shim .004 NRE27352 Bearing main pair NRE27353 Bearing main pair Standard .010 NRE27360 NRE27368 Bearing main pair Bearing main pair NAT21139 Bearing thrust pair NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair NAT21136 Bearing thrust pair Flanged, .020 Flanged, .030 NAR81786 Bearing thrust pair Flangeless, std NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair Flangeless, .010 Flangeless, .020 NAR81790 Bearing thrust pair Flangeless, .030 3 1 NR78598 NAR95932 4 NRE27348 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 Grooves in blk [NRE53265 pis, NT26149 pin, NR51112 ret, NAR55759 ring, NR116463 liner, NAR71618] BEARINGS 4 1 1 .020 .030 Flanged, std Flanged, .010 NRE27364 Bearing rod pair .030 4 4 NT23471 NT23471S Bushing con rod Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 Borable, for 1.19 pin, optional useage for honable 1 NT20034 Bushing idler upper 1 6 NT26321 NR57160 6 NR91708 lower Bushing idler Bushing balancer shaft Bushing balancer shaft Oversize OD GASKET & SEALS 1 NRE501579 Set overhaul 1 NRE38851 Set cylinder head 1 1 RP341 RP682 Set oil pan Set conversion 1 NR125863 Gasket cylinder head 1 1 NR73521 NR97350 Gasket valve cover Gasket fuel pump mtg 1 NR97342 Gasket oil pan Endurance Power Products Does not include crank seals (Replaces NRE38857) Includes oil pump installation gaskets Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 JD219-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.02 Stroke 4.33 219 Early 2 (Continued) Diesel 1.19 pin, orings in block; esn -> 275483 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear Block: T32342 Rod: T20007 Piston: AR55984, RE53265 seal with sleeve CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 1 NR82820 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded 1 1 NAR61351 NAR61352 Balancer shaft Balancer shaft RH assembly [NR54054 shaft, gear, key] LH assembly [NR54054 shaft, gear, key] NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Intake 45 deg, Exhaust 45 deg; 4 retainers, 4 rotators Valve kit Intake 30 deg, Exhaust 45 deg; 4 retainers, 4 rotators VALVE TRAIN CYLHEAD 1 HKJD342 Natural 1 HKJD343 Turbo 1 HKJD344 Turbo 4 NR79624 Valve kit Intake 30 deg, Exhaust 30 deg; 4 retainers, 4 rotators Valve exhaust 4 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 4 NR79623 Natural 4 NR83071 Turbo 4 NR51734 4 RP223 Valve intake 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Valve intake .372 stem dia; 30 degree Valve insert Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 45 degree 4 NR73064 Valve insert Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 16 8 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils NR89226 4 NR41412 Intake 4 NRE11410 Exhaust 8 NR87627 8 NT20129 Retainer valve spring Valve seal Valve stem cap Oring 18 T20183 Bolt cylinder head 1/2 x 4 [check length for proper bolts] 18 18 R53223 T20168 Bolt cylinder head Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 18 R85363 Bolt cylinder head 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 1/2 x 4-1/2, flanged head [check length for proper bolts] Crankshaft Marked T23517; Flange: flat, 4 bolt, 1 dowel; Snout: 1 threaded hole, no splines, 1 keyway Rotocap CRANKSHAFT 1 NAT18030 CONNECTING ROD 4 EAT18005 Connecting rod Remanufactured: Cast# T20007 8 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR62979K NRE31929 Oil pump kit Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 10 plate (Also order RP386 installation kit) New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type FUEL / INJECTOR 4 4 NAR89564 EAR89564 Injector Injector 4 NAT27622 Injector line connector ki Hose barb type Endurance Power Products JD219-2 (800) 467-5545 John Deere 219 Early 2 (Continued) Diesel 1.19 pin, orings in block; esn -> 275483 1 NRE42211 4 Cylinder Bore 4.02 Stroke 4.33 Block: T32342 Rod: T20007 Piston: AR55984, RE53265 Fuel transfer pump Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog TURBOCHARGER New or remanufactured available, call for pricing COOLING SYSTEM WPUMP1 WPUMP2 TURBO / AIR TURBO Endurance Power Products JD219-2 (800) 467-5545 Endurance Power Products JD219-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.02 Stroke 4.33 219 Late Diesel 1.37 pin, orings in block; esn 275484 -> Rod: R51727 Piston: AR78310, AR77762 Tractor: 1830, 2030, 2120, 2510, 2520 Windrower: 2270, 2280, 2320, 2420, 2440 Cotton Picker/Stripper: 482, 499 Sprayer: 6000 Crawler dozer: 450, 450C, 450D, JD450A, JD450B Crawler loader: 455D, JD455B, JD455C Forklift: 480C, JD480B Loader backhoe: 310A, 310B, 401A, 401B, 401C, 410, 410B Knuckleboom Loader: 7610, 7622, 7640 Skidder: JD440A/B ENGINE KITS RP206 Overhaul kit Standard RP720 RP175 Overhaul kit InFrame kit High compression Standard RP717 InFrame kit High compression RP607 Underhaul kit CYLINDER KIT 4 NRE53321 Cylinder kit Std comp [NAR77762 pist, NR125754 pin, NM41029 ret, NAR55759 ring, NR116463 liner, NAR71618] 4 4 NAR77762 NRE53322 Piston body Cylinder kit Std compression High comp [NAR87736 pist, NR125754 pin, NM41029 ret, NAR55759 ring, NR116463 liner, NAR71618] 4 NAR87736 Piston body High compression 4 4 NR125754 NM41029 Piston pin Retainer piston pin 4 NAR55759 Ring set 4 4 NR116463 NAR71618 Cylinder liner Cylinder liner oring kit 4 NR116463K Cylinder liner kit 3 seal rings, for liner with no grooves Liner with orings [NR116463, NAR71618] NR46906 Cylinder liner shim .004 No seal grooves on liner BEARINGS 4 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair .020 .030 NAT21139 Bearing thrust pair Flanged, std NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Flanged, .010 Flanged, .020 NAT21136 Bearing thrust pair Flanged, .030 NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 4 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 4 NRE27364 NR55647 Bearing rod pair Bushing con rod .030 Honable, for 1.37 pin, use with rod cast# R51727, R80034 4 NR55647S Bushing con rod Borable, for 1.37 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 6 NR57160 Bushing balancer shaft 6 NR91708 Bushing balancer shaft Oversize OD 1 1 GASKET & SEALS 1 NRE501579 Set overhaul 1 1 NRE38851 RP341 Set cylinder head Set oil pan 1 RP682 Set conversion Endurance Power Products Does not include crank seals (Replaces NRE38857) Includes oil pump installation gaskets Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 JD219-3 (800) 467-5545 John Deere 4 Cylinder Bore 4.02 Stroke 4.33 219 Late (Continued) Diesel 1.37 pin, orings in block; esn 275484 -> 1 NR125863 Gasket cylinder head 1 1 NR73521 NR97342 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear Rod: R51727 Piston: AR78310, AR77762 seal with sleeve CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 NR82820 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded 1 1 NR81514 NAR61351 Tach drive shaft Balancer shaft Helical gear style, 12 tooth; threaded RH assembly [NR54054 shaft, gear, key] 1 NAR61352 Balancer shaft LH assembly [NR54054 shaft, gear, key] VALVE TRAIN CYLHEAD 1 HKJD342 Natural 1 HKJD343 Turbo 1 HKJD344 Turbo 4 NR79624 4 NR89226 4 NR79623 Natural 4 NR83071 Turbo 4 NR51734 NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Valve kit Intake 45 deg, Exhaust 45 deg; 4 retainers, 4 rotators Valve kit Intake 30 deg, Exhaust 45 deg; 4 retainers, 4 rotators Valve kit Intake 30 deg, Exhaust 30 deg; 4 retainers, 4 rotators Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G Valve intake 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Valve intake .372 stem dia; 30 degree Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 4 RP223 Valve insert Intake, 45 degree 4 16 NR73064 NT20077 Valve insert Valve lock Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 4 NR41412 Intake 4 NRE11410 Exhaust 4 NR87627 Retainer valve spring Valve seal 8 NT20129 Valve stem cap 18 18 T20183 R53223 Bolt cylinder head Bolt cylinder head 18 T20168 Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 18 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] Crankshaft Marked T23517; Flange: flat, 4 bolt, 1 dowel; Snout: 1 threaded hole, no splines, 1 keyway Rotocap Oring 1/2 x 4 [check length for proper bolts] CRANKSHAFT 1 NAT18030 CONNECTING ROD 4 4 ER55978 ERE21076 Connecting rod Connecting rod Remanufactured: Cast# R51727 Remanufactured: Cast# R80034 8 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 8 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 Oil pump Oil pump with 1.625 gear, housing marked R54615 OIL / LUBE SYSTEM 1 NRE55343 Endurance Power Products JD219-3 (800) 467-5545 John Deere 219 Late (Continued) Diesel 1.37 pin, orings in block; esn 275484 -> 4 Cylinder Bore 4.02 Stroke 4.33 Rod: R51727 Piston: AR78310, AR77762 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NRE31929 Oil cooler 10 plate (Also order RP386 installation kit) FUEL / INJECTOR 4 NAR89564 Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 4 EAR89564 Injector Reman, pencil type 4 NAT27622 s/n -> 505383 4 RP588 s/n 505384 -> 4 NR66090 s/n 505384 -> 1 NRE42211 1 NAH130127 Combine: 3300 Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Fuel pump electric Includes NR97350 mounting gasket WPUMP1 WATER PUMP WPUMP2 WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog TURBOCHARGER New or remanufactured available, call for pricing COOLING SYSTEM TURBO / AIR TURBO Endurance Power Products JD219-3 (800) 467-5545 Endurance Power Products JD219-3 (800) 467-5545 John Deere 4 Cylinder Bore 4.020 Stroke 4.328 219 / 3.6L Gas Tractor: 2030 Combine: 3300 Piston: T30014 Cotton picker: 499 CYLINDER KIT 4 4 T30014 S41260 Piston body Ring set [OEM] 4.0157 bore; (2) 3/32, (1) 0.197 [1 cyl set] 4 NR116463 Cylinder liner No seal grooves on liner 4 NAR71618 Cylinder liner oring kit 3 seal rings, for liner with no grooves BEARINGS 2 NRE27352 Bearing main pair Standard 1 NAT21139 Bearing thrust pair Flanged, std 2 NRE27353 Bearing main pair .010 1 NAT21132 Bearing thrust pair Flanged, .010 2 NRE27360 Bearing main pair .020 1 NAT21134 Bearing thrust pair Flanged, .020 2 NRE27368 Bearing main pair .030 1 NAT21136 Bearing thrust pair Flanged, .030 4 2595A Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 4 4 2595A 10 2595A 20 Bearing rod pair Bearing rod pair .010 4 2595A 30 Bearing rod pair .020 .030 4 2599Y20 Bushing con rod 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] 6 NR57160 Bushing balancer shaft GASKET & SEALS 1 HS3900X Set cylinder head 1 RP682 Set conversion Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 1 NR73521 NAR67942 Gasket valve cover Seal crankshaft front seal with sleeve 1 NRE44574 Seal crankshaft rear 1 1 TCS45614 NR97342 Set front cover Gasket oil pan 1 R119360 Gasket oil pan For use with steel pan Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 CAMSHAFT 1 NR82820 8 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded Valve intake Valve exhaust 1.772 head dia, 5.312 length, 0.372 stem dia, 45 degree, 2G VALVE TRAIN 4 4 2111940 2111943 4 01305S Valve exhaust 8 16 NR26125 NT20077 Valve spring Valve lock 4 NR41412 Intake 4 T20287 Exhaust 1.457 head dia, 5.322 length, 0.372 stem dia, 45 degree, 1G 1.457 head dia, 5.322 length, 0.3720 stem dia, 0.2725 tip to grv, 45 deg 1G, stellite 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Retainer valve spring Rotator Endurance Power Products JD219-4 (800) 467-5545 John Deere 219 / 3.6L Gas (Continued) 4 NR87627 Intake 8 NT20129 Valve seal 4 Cylinder Bore 4.020 Stroke 4.328 Piston: T30014 Oring Valve stem cap COOLING SYSTEM WPUMP1 WATER PUMP Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog JD219-4 (800) 467-5545 John Deere 4 Cylinder Bore 4.250 Stroke 4.000 227 / 3.7L Gas Block: R33190, R40840; REPL: R40690, R49510 Tractor: 3020 sn -> 122,999 ENGINE KITS JD-3020-G1-IF JD-3020-G1-OF InFrame kit Overhaul kit 3020 Gas sn -> 122,999 except block# R40690, R49510; SL-2279 cylinder kit 3020 Gas sn -> 122,999 except block# R40690, R49510; SL-2279 cylinder kit JD-3020-LP-IF JD-3020-LP-OF InFrame kit Overhaul kit 3020 LP sn -> 122,999 except block# R40690, R49510; SL-2454 cylinder kit 3020 LP sn -> 122,999 except block# R40690, R49510; SL-2454 cylinder kit CYLINDER KIT 4 SL-2279 Cylinder kit Gas except block marked: R40690, R49510 4 SL-2707 Cylinder kit Gas with block marked: R40690, R49510 4 SL-2454 Cylinder kit LPG except block marked: R40690, R49510 4 SL-2708 Cylinder kit LPG with block marked: R40690, R49510 4.2500 bore, 4.810 liner barrel, 5.125 flange dia, 2 seal rings in block [2279P, SO-2279, 5589KX] 4 4 2279P 2454P Piston Piston Discontinued, 4.2500 bore, 2.652 CD, 1.250 pin dia, 7.5:1 CR; (3) 3/32, (1) 1/4 [R33372, R34617] 2 5589KX Ring set 4.2500 bore; (3) 3/32, (1) 1/4 [2 cyl set] [OE AR34394] 2 9541KX Ring set 4.2500 bore; (3) 3/32, (2) 1/4 [2 cyl set] 4 SO-2279 Cylinder liner kit 4.2500 bore; 5.125 x 0.252 flange, 4.875 pilot, seal rings in block (1) SLR-2024, (1) SLR-2243 [R33197] 4 SO-2546 Cylinder liner kit 4.2500 bore; 5.178 x 0.252 flange, 4.921 pilot, 1 seal ring in block (1) SLR-2479, (1) SLR-2520 Discontinued; 4.2500 bore, 4.840 barrel, 5.178 flange, 1 seal grv in block [2279P, SO-2546, 5589KX] 4.2500 bore, 4.810 liner barrel, 5.125 flange dia, 2 seal rings in block [2454P, SO-2279, 5589KX] Discontinued; 4.2500 bore, 4.840 barrel, 5.178 flange, 1 seal grv in block [2454P, SO-2546, 5589KX] Discontinued, 4.2500 bore, 2.655 CD, 1.250 pin dia, flat topt; (3) 3/32, (1) 1/4 [R33374, R40778] BEARINGS JDBRG1 except block marked: R40920, R49540 2 NAR49243 Bearing main pair Upper and Lower halves: offset tangs 1 NAR77754 Bearing thrust pair Flangeless, Standard 1 NAR77747 Thrust washer set main Standard 2 NAR49245 Bearing main pair .010 1 NAR77756 Bearing thrust pair Flangeless, .010 2 NAR49246 Bearing main pair .020 1 NAR77757 Bearing thrust pair Flangeless, .020 2 NAR49247 Bearing main pair .030 1 NAR77758 Bearing thrust pair Flangeless, .030 Standard Upper half offset tang, Lower half center tang with block marked: R40920, R49540 2 NAR74814 Bearing main pair 1 NAR77748 Bearing thrust pair Standard Flangeless, Standard 1 NAR77747 Thrust washer set main Standard 2 NAR74816 Bearing main pair .010 1 NAR77750 Bearing thrust pair Flangeless, .010 2 NAR74817 Bearing main pair .020 1 NAR77751 Bearing thrust pair Flangeless, .020 Endurance Power Products JD227-1 (800) 467-5545 John Deere 227 / 3.7L Gas (Continued) 4 Cylinder Bore 4.250 Stroke 4.000 Block: R33190, R40840; REPL: R40690, R49510 2 NAR74818 Bearing main pair .030 1 NAR77752 Bearing thrust pair Flangeless, .030 1 NAR77753 Thrust washer set main .007 O/S 4 NAR45723 Bearing rod pair Standard 4 NAR46396 Bearing rod pair .010 4 4 NAR46397 NAR46398 Bearing rod pair Bearing rod pair .020 .030 3 NR46903 Bearing cam 4 3129YA20 Bushing con rod 1.252 ID, 1.3755 OD, 1.510 length GASKET & SEALS 1 260-1390 Set overhaul Includes crankshaft seals 1 HS3217VY Set cylinder head [OE: AR53028] 1 CS3850 Set conversion Does not include crankshaft seals 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve 1 NR49865 Gasket valve cover 1 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 1 TCS45492 Set timing cover 1 NAR30544 Set oil pan Includes oil pump installation gaskets Camshaft kit [NR46427 cam, NR32428 oil pump gear] Uses 20 tooth tach drive R32426 (original cams used 15 tooth) CAMSHAFT 1 NAR32730 8 NR26342 Lifter except block R40690, R49510 8 ER26342 Lifter 8 NR52773 Lifter for block R40690, R49510 Remanufactured Mushroom style VALVE TRAIN 4 00659 Valve intake 1.688 head dia, 5.700 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26109] 4 8 00658 140-1897 Valve exhaust Valve guide 1.500 head dia, 5.731 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26108] 0.3745 ID, 0.6255 OD, 2.938 length, 11-P 8 2121111 Valve spring 2.156 free, 1.250 OD; 1.812@33, 1.375@90 16 4 NB367R AR26336 Valve lock Rotator 4 SB1750-2 Valve insert Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree, use with 1.680 valve head dia. 4 SB1562-1N Valve insert Exhaust: 1-5/16 ID, 1-9/16 OD, 7/32 depth WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog NR36846 Thermostat 180 degree, 63mm COOLING SYSTEM 1 Endurance Power Products JD227-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 4.33 239D Diesel Rod: R51727, R80034 Piston: RE19282 Tractor: 1640, 1840, 2240, 2350, 2355, 2450, 2550, 2555, 2555CS, 2650, 2850, 2855, 2855N, 5300 Windrower: 2360, 2630, 3430 early Tractor European: 935, 940, 942, 2040, 2130, 2250, 2450F, 5300N Crawler dozer: 400G Excavator: JD34, JD44, JD45, 70, 70D, 290D, 490 Forklift: 482C Loader: 244E Loader backhoe: 210C, 310C, 315D, 315CH, 315C, 415B, 515B ENGINE KITS RP242 Overhaul kit Rod bolts in kit NR80033 for rod# R80034 RP836 Saran built engines RP236 Overhaul kit Low ring; Rod bolts in kit NR80033 for rod# R80034 InFrame kit Rod bolts in kit NR80033 for rod# R80034 RP830 InFrame kit Saran built engines RP607 Underhaul kit Rod bolts in kit NR74914 for rod# R51727 RP611 Underhaul kit Rod bolts in kit NR80033 for rod# R80034 Low ring; Rod bolts in kit NR80033 for rod# R80034 CYLINDER KIT 4 NRE30250 Cylinder kit 4 NRE19282 Piston body High ring [NRE19282 pist, NR125754 pin, NM41029 ret, NRE66820 ring, NR116281 liner, NAR65507] 4 NRE24458 Saran built engines 4 NRE11509 Cylinder kit Low ring [NRE11509 pist, NR125754 pin, NM41029 ret, NRE66820 rings, NR116281 liner, NAR65507] Piston Low ring 4 NR125754 Piston pin 8 4 NM41029 NRE66820 Retainer piston pin Ring set 4 NR116281 Cylinder liner 4 4 NAR65507 NRE500023 Cylinder liner oring kit Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 BEARINGS 4 NRE27352 Bearing main pair Standard NRE27353 Bearing main pair .010 NRE27360 NRE27368 Bearing main pair Bearing main pair .020 .030 NAT21139 Bearing thrust pair Flanged, std NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Flanged, .010 NAT21136 Bearing thrust pair NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair NAR81789 Bearing thrust pair NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 3 1 NAR95932 4 NRE27348 Std, use with flangeless thrust Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 1 1 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 NRE27364 Bearing rod pair .030 4 4 NR55647 NR55647S Bushing con rod Bushing con rod Honable, for 1.37 pin, use with rod cast# R51727, R80034 Borable, for 1.37 pin, optional useage for honable 1 NT20034 Bushing idler upper 1 6 NT26321 NR57160 6 NR91708 lower Bushing idler Bushing balancer shaft Bushing balancer shaft Oversize OD Endurance Power Products JD239-1 (800) 467-5545 John Deere 239D Diesel (Continued) 4 Cylinder Bore 4.19 Stroke 4.33 Rod: R51727, R80034 Piston: RE19282 GASKET & SEALS 1 NRE501579 Set overhaul Does not include crank seals (Replaces NRE38857) 1 1 NRE38851 RP341 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP682 Set conversion Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 1 NR125863 NR73521 Gasket cylinder head Gasket valve cover 1 NR97342 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear seal with sleeve CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 1 NR82820 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 1 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NAR61351 NAR61352 Balancer shaft Balancer shaft RH assembly [NR54054 shaft, gear, key] For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting LH assembly [NR54054 shaft, gear, key] VALVE TRAIN 1 CYLHEAD HKJD342 NOTE Valve kit 4 NR79624 Valve exhaust 4 4 NR89226 NR79623 Valve exhaust Valve intake 4 NR51734 Valve insert 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 4 RP223 Valve insert Intake, 45 degree 16 8 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 4 NR41412 Retainer valve spring 4 4 NRE11410 NR87627 Rotocap Valve seal Intake 45 deg, Exhaust 45 deg; 4 retainers, 4 rotators 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G Oring 8 NT20129 Valve stem cap 18 18 R53223 T20168 Bolt cylinder head Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 18 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] Crankshaft Marked T23517; Flange: flat, 4 bolt, 1 dowel; Snout: 1 threaded hole, no splines, 1 keyway CRANKSHAFT 1 NAT18030 s/n -> 769619 1 NRE20585 s/n 769620 -> 1 NR81989 Crankshaft Marked R81959, R121018; Long nose; Snout: keyway 5/16 x 1-1/8 Sleeve crank seal Front 1 Packing Front crank sleeve NH35244 CONNECTING ROD 4 ERE21076 Connecting rod Remanufactured: Cast# R80034 4 8 ER55978 NR80033 Connecting rod Bolt connecting rod Remanufactured: Cast# R51727 8 NR74194 Bolt connecting rod Use with rod casting# R80032, R80034 Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 1 NRE55343 NAR79464 Oil pump Oil pump Oil pump with 1.625 gear, housing marked R54615 Oil pump with 2.000 gear, housing marked R54629 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) Endurance Power Products JD239-1 (800) 467-5545 John Deere 239D Diesel (Continued) 1 NRE15940K Oil pump kit 4 Cylinder Bore 4.19 Stroke 4.33 Rod: R51727, R80034 Piston: RE19282 For pump with 2.000 gear, housing marked R54629 (replaces RP249) 10 plate (Also order RP386 installation kit) 1 NRE31929 Oil cooler Will not directly replace early design on 4030 tractor 1 RP386 Oil cooler installation kit FUEL / INJECTOR 4 4 NAR89564 EAR89564 4 NAT27622 s/n -> 410663 4 RP588 s/n 410664 -> 4 NR66090 s/n 410664 -> 1 NRE42211 Injector Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP WPUMP2 WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD239-1 (800) 467-5545 Endurance Power Products JD239-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 4.33 239T Diesel Rod: R58979, R80032, R113612 Piston: RE19278 Tractor: 2140, 2555, 2650, 2750, 2755, 2850, 2855, 2855N, 5500 Tractor European: 945, 952, 2650N, 2650F Windrower: 3430 late, 3830 Sprayer: 6100, 6500, 6600 Combine European: 952, 1155, 9450 Excavator: 490 Loader backhoe: 310C, 310D, 315C, 315CH, 515B ENGINE KITS RP245 Overhaul kit Rod bolts in kit NR80033 for rod# R80034 RP239 InFrame kit Rod bolts in kit NR80033 for rod# R80034 RP607 Underhaul kit Rod bolts in kit NR74914 for rod# R51727 RP611 Underhaul kit Rod bolts in kit NR80033 for rod# R80034 CYLINDER KIT 4 NRE33115 Cylinder kit 4 4 NRE19278 NR124230 Piston body Piston pin 8 NR54114 Retainer piston pin 4 4 NRE66820 NR116281 Ring set Cylinder liner 4 NAR65507 Cylinder liner oring kit 4 NRE500023 NCD15466 Cylinder liner Cylinder liner shim .002 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 .020 NRE27368 Bearing main pair .030 NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair Flanged, std Flanged, .010 NAT21134 Bearing thrust pair Flanged, .020 NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair Flanged, .030 Flangeless, std NAR81788 Bearing thrust pair Flangeless, .010 NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair Flangeless, .020 Flangeless, .030 3 NR78598 1 4 NAR95932 NRE27348 NRE27349 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 NRE27364 Bearing rod pair Bearing rod pair .020 .030 [NRE19278 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR116281 liner, NAR65507] Liner with orings [NR116281, NAR65507] BEARINGS 4 1 1 4 NR57451 Bushing con rod Honable, use w/ rod cast# R56187, R80032 4 1 NR57451S NT20034 Bushing con rod Bushing idler Borable, Optional useage for honable 1 NT26321 Bushing idler 6 6 NR57160 NR91708 Bushing balancer shaft Bushing balancer shaft Oversize OD upper lower GASKET & SEALS 1 1 NRE501579 NRE38851 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE38857) 1 RP341 Set oil pan Includes oil pump installation gaskets 1 RP682 Set conversion Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 1 NR125863 NR73521 Gasket cylinder head Gasket valve cover 1 NR97342 Gasket oil pan Endurance Power Products JD239-2 (800) 467-5545 John Deere 239T Diesel (Continued) 1 NR97350 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear 4 Cylinder Bore 4.19 Stroke 4.33 Rod: R58979, R80032, R113612 Piston: RE19278 Gasket fuel pump mtg seal with sleeve CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 NR82820 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded Tach drive shaft Balancer shaft Helical gear style, 12 tooth; threaded RH assembly [NR54054 shaft, gear, key] Balancer shaft LH assembly [NR54054 shaft, gear, key] Balancer shaft RH assembly [NR54634 shaft, gear, key] Balancer shaft LH assembly [NR54634 shaft, gear, key] CYLHEAD NOTE 1 HKJD343 Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Intake 30 deg, Exhaust 45 deg; 4 retainers, 4 rotators 1 HKJD344 Valve kit Intake 30 deg, Exhaust 30 deg; 4 retainers, 4 rotators 4 4 NR79624 NR89226 Valve exhaust Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 4 NR83071 Valve intake .372 stem dia; 30 degree 4 4 NR51734 NR73064 Valve insert Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 16 NT20077 Valve lock 8 4 NR26125 NR41412 Valve spring Retainer valve spring 4 NRE11410 Rotocap 4 8 NR87627 NT20129 Valve seal Valve stem cap Oring 18 R53223 Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] 18 18 T20168 R85363 Washer head bolt Bolt cylinder head 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 1/2 x 4-1/2, flanged head [check length for proper bolts] Crankshaft Marked T23517; Flange: flat, 4 bolt, 1 dowel; Snout: 1 threaded hole, no splines, 1 keyway 1 NR81514 1 NAR61351 sn -> 746,397 1 NAR61352 sn -> 746,397 1 NAR69710 sn 746,398 -> 1 NAR69711 sn 746,398 -> VALVE TRAIN 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils CRANKSHAFT 1 NAT18030 s/n ->769619 1 NRE20585 s/n 719620 -> 1 NR81989 Crankshaft Marked R81959, R121018; Long nose; Snout: keyway 5/16 x 1-1/8 Sleeve crank seal 1 Packing Front Front crank sleeve NH35244 CONNECTING ROD 4 4 NRE42733 ERE16494 Connecting rod Connecting rod New; Cast# R113612 [also works for cast# R80032] Remanufactured: Cast# R80032 8 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 8 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 Oil pump Oil pump with 1.625 gear, housing marked R54615 Oil pump Oil pump with 2.000 gear, housing marked R54629 OIL / LUBE SYSTEM 1 NRE55343 Dubuque 1 NAR79464 Saran Endurance Power Products JD239-2 (800) 467-5545 John Deere 239T Diesel (Continued) 4 Cylinder Bore 4.19 Stroke 4.33 Rod: R58979, R80032, R113612 Piston: RE19278 For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NAR62979K Oil pump kit Dubuque For pump with 2.000 gear, housing marked R54629 (replaces RP249) 1 NRE15940K Oil pump kit Saran 10 plate (Also order RP386 installation kit) 1 NRE31929 Oil cooler Will not directly replace early design on 4030 tractor 1 RP386 Oil cooler installation kit FUEL / INJECTOR 4 4 NAR89564 EAR89564 4 NAT27622 s/n -> 410663 4 RP588 s/n 410664 -> 4 NR66090 s/n 410664 -> 1 NRE42211 Injector Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM WPUMP1 WPUMP2 TURBO / AIR 1 TURBO R43724 TURBOCHARGER Exhaust sleeve New or remanufactured available, call for pricing 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 1 R43724G Exhaust sleeve 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing 2 702299C1 Turbo seal ring Endurance Power Products JD239-2 (800) 467-5545 Endurance Power Products JD239-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.250 Stroke 4.250 241 / 4.2L Gas Block: R40920, R49540 Tractor: 3020 sn 123,000 -> ENGINE KITS JD-3020-G3-IF JD-3020-G3-OF InFrame kit Overhaul kit 3020 Gas sn 123,000 -> ; SL-2546 cylinder kit 3020 Gas sn 123,000 -> ; SL-2546 cylinder kit JD-3020-L-LP Overhaul kit 3020 LP sn 123,000 -> ; Call for price and availability CYLINDER KIT 4 AR52550 Cylinder kit 4.2500 bore, 4.840 liner barrel, 5.178 flange dia, 2 seal rings in block [2546P, SO-2546, 9805KX] 4 2546P Piston Discontinued, 4.2500 bore, 2.539 CD, 1.250 pin dia, cup; (2) 3/32, (1) 3/16 [R40795, R47863] 2 4 9805KX 9376KX Ring set Ring set 4.2500 bore; (2) 3/32, (1) 3/16 [2 cyl set] [OE AR54879] 4.2500 bore; (2) 3/32, (1) 1/4 [1 cyl set] [OE AR42612] 4 SO-2546 Cylinder liner kit 4.2500 bore; 5.178 x 0.252 flange, 4.921 pilot, 1 seal ring in block (1) SLR-2479, (1) SLR-2520 BEARINGS Upper half offset tang, Lower half center tang 2 1 NAR74814 NAR77748 Bearing main pair Bearing thrust pair Standard NAR77747 Flangeless, Standard Thrust washer set main Standard 1 2 NAR74816 Bearing main pair 1 NAR77750 Bearing thrust pair .010 Flangeless, .010 2 NAR74817 Bearing main pair 1 NAR77751 Bearing thrust pair .020 Flangeless, .020 2 1 NAR74818 NAR77752 Bearing main pair Bearing thrust pair .030 Flangeless, .030 1 NAR77753 Thrust washer set main .007 O/S 4 NAR45723 Bearing rod pair Standard 4 4 NAR46396 NAR46397 Bearing rod pair Bearing rod pair .010 .020 4 NAR46398 Bearing rod pair .030 3 NR46903 Bearing cam 4 3129YA20 Bushing con rod 1.252 ID, 1.3755 OD, 1.510 length GASKET & SEALS 1 AR53031 Set overhaul OEM 1 1 AR53030 CS3846Y Set cylinder head Set conversion OEM 1 1 NAR49025 NRE22764 Seal crankshaft front Seal crankshaft rear Includes wear sleeve 1 1 NR49865 NR83020 2 NR83021 Gasket valve cover Gasket manifold exhaust Double Gasket manifold exhaust Single 1 TCS45492 Set timing cover Endurance Power Products Does not include crankshaft seals Includes wear sleeve JD241-1 (800) 467-5545 John Deere 241 / 4.2L Gas (Continued) 1 NAR30544 4 Cylinder Bore 4.250 Stroke 4.250 Block: R40920, R49540 Set oil pan Includes oil pump installation gaskets Camshaft kit Lifter [NR42351 cam, NR52773 lifters, NR45134] Uses 20 tooth tach drive R32426 (orginal cam used 15 tooth) Mushroom style CAMSHAFT 1 8 NAR44393 NR52773 VALVE TRAIN 4 4 01402 01376S Valve intake Valve exhaust 1.688 head dia, 5.914 length, 0.3720 stem dia, 0.2960 tip to grv, 45 deg, 2G 1.500 head dia, 5.945 length, 0.3720 stem dia, 0.2960 tip to grv, 45 deg, 1G, stellite 8 140-1898 Valve guide 0.375 ID, 0.6255 OD, 3.313 length, 11-P 8 8 140-1898+2 NR26125 Valve guide Valve spring 0.3750 ID, 0.6275 OD, 3.313 length, 11-P; may be used with 5/8 reamer 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 16 NT20077 Valve lock 4 4 T20287 SB1750-2 Rotator Valve insert Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree, use with 1.680 valve head dia. 4 SB1562-1N Valve insert Exhaust: 1-5/16 ID, 1-9/16 OD, 7/32 depth WPUMP1 WATER PUMP NR36846 Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog 180 degree, 63mm COOLING SYSTEM 1 Endurance Power Products JD241-1 (800) 467-5545 John Deere 248 / 4.1L Gas 6 Cylinder Bore 3.875 Stroke 3.500 Combine: 105 CYLINDER KIT 3 2C7118 Ring set 3.6250 bore, (3) 3/32, (1) 3/16 [2 cyl set] 2010 sn -> 29018 BEARINGS 6 2595A Bearing rod pair Std; 2.3085/2.3095 shaft, 2.4365/2.4375 hsg bore, 1.2190 length 6 1 2599Y20 SH501S Bushing con rod Bearing cam set 1.1886 ID, 1.313 OD, 1.493 length [OE T526T] Set of 4 bearings [(3) SH501, (1) SH500] GASKET & SEALS 1 FS3238 1961-62 1 HS3238 1961-62 1 VS39567 1961-62 1 46757 248: 1961-62 1 46328SF 248: 1961-62 Set overhaul Set cylinder head Gasket valve cover Seal crankshaft rear 3.750 shaft, 4.757 OD, 0.375 width Seal crankshaft front 1.500 shaft, 2.381 OD, 0.500 width WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD248-1 (800) 467-5545 Endurance Power Products JD248-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.250 Stroke 4.750 270 Early Diesel Original block; esn -> 280000 Tractor: 3010; 3020 msn -> 122,999 (check block casting) Block: R26160, R32020, R40850, R46385 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 Loader backhoe: JD500, JD500A (check block casting) ENGINE KITS 1 1 RP297 RP729 Overhaul kit Overhaul kit 1 RP295 InFrame kit 1 RP614 Underhaul kit Hyperformance CYLINDER KIT 4 NRE23173 Cylinder kit Standard [NRE40566 pist, NR44161 pin, NH80753 ret, NAR55630 rings, NR32050 liner, NAR40155] 4 4 NRE40566 NAR55630 Piston body Ring set Standard Standard 4 RP725 Cylinder kit Hyper [RP710 piston, NR44161 pin, NH80753 ret, NAR65502 rings, NR32050 liner, NAR40155 orings] 4 4 RP710 NAR65502 Piston body Ring set Hyperformance 4 NR44161 Piston pin 8 4 NH80753 NR32050 Retainer piston pin Cylinder liner 4 NAR40155 Cylinder liner oring kit 4 NR32050K NAR31744 Cylinder liner kit Cylinder liner shim Liner with orings [NR32050, NAR40155] .004 thick NAR39521 Cylinder liner shim .015 thick NAR31745 Cylinder liner shim .030 thick BEARINGS 4 1 NAR49243 Bearing main pair Standard NAR49245 NAR49246 Bearing main pair Bearing main pair .010 NAR49247 Bearing main pair NAR77754 NAR77756 Bearing thrust pair Bearing thrust pair NAR77757 Bearing thrust pair NAR77758 .020 .030 Flangeless, Standard Flangeless, .010 Flangeless, .020 1 NAR77747 NAR77753 4 NAR45723 Flangeless, .030 Bearing thrust pair Thrust washer set main Standard Thrust washer set main .007 O/S Standard Bearing rod pair NAR46396 NAR46397 Bearing rod pair Bearing rod pair .010 .020 NAR46398 Bearing rod pair .030 4 4 NR30939 NR30939S Bushing con rod Bushing con rod Honable Borable, Optional useage for honable 4 NR46903 Bearing cam GASKET & SEALS 1 NAR53033 Set overhaul 1 NAR53032 Set cylinder head 1 1 NAR30544 RP683 Set oil pan Set conversion 1 NR45616 Gasket cylinder head 1 1 NR49865 NR71917 Gasket valve cover Gasket oil pan 1 NR83020 2 NR83021 NR26297 Gasket manifold exhaust Double Gasket manifold exhaust Single 1 NR97350 Does not include crank seals Includes oil pump installation gaskets Add to pan & head sets to create complete OH set Gasket manifold intake Gasket fuel pump mtg Endurance Power Products JD270-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.250 Stroke 4.750 270 Early (Continued) Diesel Original block; esn -> 280000 1 NR26058 Gasket rear seal hsg 1 1 NR26084 NAR49025 Gasket timing cover Seal crankshaft front 1 NRE22764 Seal crankshaft rear Includes wear sleeve Includes wear sleeve Block: R26160, R32020, R40850, R46385 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 CAMSHAFT 1 1 NAR32730 NR46427 Camshaft kit Camshaft [NR46427 cam, NR32428 oil pump gear] Uses 20 tooth tach drive R32426 (original cams used 15 tooth) Sold in kit only 1 NR32428 Oil pump drive gear Gear only, used with shaft R32427 (NLA). When shaft is worn, gear & shaft are replaced by NR45134 1 8 NR45134 NR26342 Gear oil pump drive Lifter One piece gear and shaft (can replace NR32428 gear) 1 NR26115 Plug cam end VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 RP474 Valve kit esn -> 157,001; 3010 tractor 1 RP476 Valve kit esn 157,002 - 280,000; 3020 tsn -> 122,999 1 RP476B Valve kit 4 NR26123 Valve exhaust Engine s/n -> 157,001 4 NR44175 Valve exhaust Engine s/n 157,002 - 280,000 4 NR26124 Valve intake Engine s/n -> 157,001 4 NR44174 Valve intake Engine s/n 157,002 - 280,000 4 NR43681 Valve insert Engine s/n 157,002 - 280,000 4 NR43680 Valve insert Engine s/n 157,002 - 280,000 16 NB367R Valve lock 8 NR28654 Valve guide Cast# R26030 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 4 4 NAR26337 NR40223 Rotocap Retainer valve spring 8 AR41690 Valve seal Engine s/n 159,001 - 280,000 8 NR87627 Valve seal Cast# R32040, R34860 Same as RP476 - without seats 1.715 head dia; 6.227 length; 0.372 stem dia; 44 degree; 2G 1.902 head dia; 6.245 length; 0.372 stem dia; 44 degree; 2G Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree Umbrella seal Oring 9/16 x 6 R42464 Bolt cylinder head (11) used esn -> 67,999; (6) used esn 68,000 - 280,000 9/16 x 5 3 R42463 Bolt cylinder head (3) used esn -> 67,999; (3) used esn 68,000 - 280,000 9/16 x 3 4 R42462 Bolt cylinder head (4) used esn -> 67,999; (4) used esn 68,000 - 280,000 9/16 x 7.12 5 R42465 Bolt cylinder head (5) used esn 68,000 - 280,000 Use with bolts: R42462, R42463, R42464, R42465 R76126 Washer head bolt CRANKSHAFT Marked R26540 or R46498; Flange: no centering ring, 4 bolt hole, 2 dowel holes 1 AR26428 Crankshaft -> 122,999 Marked R40570; Flange: Centering ring, 4 bolt hole, 2 dowels 1 NAR40485 Crankshaft 130,000 -> ; can use on early models if flywheel is cut to accommodate centering ring Endurance Power Products JD270-1 (800) 467-5545 John Deere 270 Early (Continued) Diesel Original block; esn -> 280000 4 Cylinder Bore 4.250 Stroke 4.750 Block: R26160, R32020, R40850, R46385 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 CONNECTING ROD 4 EAR70910 Connecting rod 8 NR66452 Bolt connecting rod Remanufactured: Cast # R26047,R52225,R58880,R66923 OIL / LUBE SYSTEM 1 NR26151 1 AR32694 3020 Tractor Spring oil press regulato Oil cooler remanufactured 4 NAR50781 Engine s/n 68,000 -> 4 EAR50781 Injector New, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 Injector Reman, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 4 4 NR60746 NR48000 Injector seal Injector seal 4 NR34765 Boot injector FUEL / INJECTOR Straight leak-off boot 8 NR34766 Clamp leak off line boot 1 NRE43273 Fuel transfer pump 3010, 3020: Tractor s/n -> 122,999 Includes NR97350 mounting gasket 1 NRE42211 Fuel transfer pump 3020: Tractor sn 123,000 -> ; JD500A esn 82,802 - 280,000 COOLING SYSTEM 1 NAR45332 Water pump New (NR39503, NM42830, NM27548, NR28746) mkd R26337, R34977, R34982, R41315, R44122 1 NAR55617 Tractor: 3010, 3020 1 NAR55619 Tractor: 3010, 3020 1 NAR98564 Water pump kit Use with cast# R26337, R27547, R34977, R34982 [R40979, AR62933, JD9212, R26343, R26341] Water pump kit Use with cast# R41315, R41318, R44122 [R40979, AR62933, JD9355, R26343, R26341] Water pump kit Use with cast# R34964, R34974, R41316 [R40979, AR101549, JD9257, R26343, R26341] 1 Thermostat 180 degree, 63mm NR36846 Endurance Power Products JD270-1 (800) 467-5545 Endurance Power Products JD270-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.250 Stroke 4.750 270 Repl Diesel Replacement block; esn -> 280000 Tractor: 3010; 3020 msn -> 122,999 (check block casting) Block: R46350, R46430 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 Loader backhoe: JD500, JD500A (check block casting) ENGINE KITS 1 1 RP631 RP630 Overhaul kit InFrame kit 1 RP615 Underhaul kit Standard Standard CYLINDER KIT 4 NRE23170 Cylinder kit Standard [NRE40566 pist, NR44161 pin, NH80753 ret, NAR55630 rings, NR40615 liner, NAR65507] 4 4 4 NRE40566 Piston body Standard NAR55630 RP726 Ring set Cylinder kit Standard Hyper [RP711 piston, NR44161 pin, NH80753 ret, NAR65502 rings, NR40615 liner, NAR65507 orings] 4 4 8 RP711 Piston body Hyperformance NR44161 NH80753 Piston pin Retainer piston pin 4 NR40615 Cylinder liner 4 4 NAR65507 NR40615K Cylinder liner oring kit Cylinder liner kit Liner with orings [NR40615, NAR65507] NR116253 Cylinder liner shim .002 NAR49243 Bearing main pair NAR49245 Bearing main pair Standard .010 NAR49246 NAR49247 Bearing main pair Bearing main pair NAR77754 Bearing thrust pair NAR77756 NAR77757 Bearing thrust pair Bearing thrust pair NAR77758 Bearing thrust pair 1 NAR77747 NAR77753 4 NAR45723 Thrust washer set main Standard Thrust washer set main .007 O/S Standard Bearing rod pair NAR46396 Bearing rod pair .010 NAR46397 NAR46398 Bearing rod pair Bearing rod pair .020 .030 Standard BEARINGS 4 1 .020 .030 Flangeless, Standard Flangeless, .010 Flangeless, .020 Flangeless, .030 4 NR30939 Bushing con rod Honable 4 4 NR30939S NR46903 Bushing con rod Bearing cam Borable, Optional useage for honable Set overhaul Set cylinder head Does not include crank seals GASKET & SEALS 1 1 NAR53033 NAR53032 1 NAR30544 Set oil pan Includes oil pump installation gaskets 1 1 RP683 NR45616 Set conversion Gasket cylinder head Add to pan & head sets to create complete OH set 1 NR49865 Gasket valve cover 1 1 NR71917 NR83020 2 NR83021 Gasket oil pan Gasket manifold exhaust Double Gasket manifold exhaust Single 2 1 NR26297 NR97350 Gasket manifold intake Gasket fuel pump mtg 1 NR26058 Gasket rear seal hsg 1 1 NR26084 NAR49025 Gasket timing cover Seal crankshaft front 1 NRE22764 Seal crankshaft rear Endurance Power Products Includes wear sleeve Includes wear sleeve JD270-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.250 Stroke 4.750 270 Repl (Continued) Diesel Replacement block; esn -> 280000 Block: R46350, R46430 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 CAMSHAFT 1 NAR49143 Camshaft kit [NR46427 cam, NR32428, NR52773 lifters] Uses 20 tooth tach drive R32426 (orginal cam used 15 tooth) 1 8 NR46427 NR52773 Camshaft Lifter Sold in kit only Mushroom style 1 NR32428 Oil pump drive gear Gear only, used with shaft R32427 (NLA). When shaft is worn, gear & shaft are replaced by NR45134 1 1 NR45134 NR26115 Gear oil pump drive Plug cam end One piece gear and shaft (can replace NR32428 gear) VALVE TRAIN CYLHEAD NOTE 1 RP474 Valve kit esn -> 157,001; 3010 tractor 1 RP476 Valve kit esn 157,002 - 280,000; 3020 tsn -> 122,999 1 RP476B Valve kit 4 NR26123 Valve exhaust Engine s/n -> 157,001 4 NR44175 Valve exhaust Engine s/n 157,002 - 280,000 4 NR26124 Valve intake Engine s/n -> 157,001 4 NR44174 Valve intake Engine s/n 157,002 - 280,000 4 NR43681 Valve insert Engine s/n 157,002 - 280,000 4 NR43680 Valve insert Engine s/n 157,002 - 280,000 16 NB367R Valve lock 8 8 NR28654 NR26125 Valve guide Valve spring 4 NAR26337 Rotocap 4 NR40223 Retainer valve spring 8 AR41690 Valve seal Engine s/n 159,001 - 280,000 8 NR87627 Valve seal 1 RP364 Bolt cylinder head set For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R26030 Cast# R32040, R34860 Same as RP476 - without seats 1.715 head dia; 6.227 length; 0.372 stem dia; 44 degree; 2G 1.902 head dia; 6.245 length; 0.372 stem dia; 44 degree; 2G Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Umbrella seal Oring (4) NR88042, (3) NR88043, (6) NR88044, (5) NR88045 CRANKSHAFT Marked R26540 or R46498 1 NAR26428 Crankshaft -> 122,999 Marked R40570; Flange: Centering ring, 4 bolt hole, 2 dowels 1 NAR40485 Crankshaft 130,000 -> ; can use on early models if flywheel is cut to accommodate centering ring CONNECTING ROD 4 EAR70910 Connecting rod 8 NR66452 Bolt connecting rod Remanufactured: Cast # R26047,R52225,R58880,R66923 OIL / LUBE SYSTEM 1 NR26151 Spring oil press regulato 1 AR32694 Oil cooler remanufactured 4 NAR50781 Engine s/n 68,000 -> 4 EAR50781 4 NR60746 Injector New, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 Injector Injector seal Reman, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 4 Injector seal FUEL / INJECTOR NR48000 Endurance Power Products JD270-2 (800) 467-5545 John Deere 270 Repl (Continued) Diesel Replacement block; esn -> 280000 4 NR34765 Boot injector 4 Cylinder Bore 4.250 Stroke 4.750 Block: R46350, R46430 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 Straight leak-off boot 8 NR34766 Clamp leak off line boot 1 NRE43273 Fuel transfer pump 3010, 3020: Tractor s/n -> 122,999; Includes NR97350 mounting gasket 1 NRE42211 Fuel transfer pump 3020: Tractor sn 123,000 -> ; JD500A esn 82,802 - 280,000 COOLING SYSTEM 1 NAR45332 Water pump New (NR39503, NM42830, NM27548, NR28746) mkd R26337, R34977, R34982, R41315, R44122 1 NAR55617 Tractor: 3010, 3020 1 NAR55619 Tractor: 3010, 3020 1 NAR98564 Water pump kit Use with cast# R26337, R27547, R34977, R34982 [R40979, AR62933, JD9212, R26343, R26341] Water pump kit Use with cast# R41315, R41318, R44122 [R40979, AR62933, JD9355, R26343, R26341] Water pump kit 1 Thermostat Use with cast# R34964, R34974, R41316 [R40979, AR101549, JD9257, R26343, R26341] 180 degree, 63mm NR36846 Endurance Power Products JD270-2 (800) 467-5545 Endurance Power Products JD270-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.250 Stroke 4.750 270 Late Diesel esn 280000 -> Tractor: 3020 msn 123,000 -> Block: R40620,R40700,R40910,R47520,R45950,R48430,R50610,R7 Rod: R26047, R52225, R58880, R69923 Piston: RE23168, RE40563 Loader backhoe: JD500, JD500B, 500C, 510 ENGINE KITS 1 1 RP298 RP730 Overhaul kit Overhaul kit 1 RP296 InFrame kit 1 RP615 Underhaul kit Hyperformance CYLINDER KIT 4 NRE23165 Cylinder kit Standard [NRE40563 pist, NR44161 pin, NH80753 ret, NAR55630 rings, NR40615 liner, NAR65507] 4 4 NRE40563 NAR55630 Piston body Ring set Standard Standard 4 RP726 Cylinder kit Hyper [RP711 piston, NR44161 pin, NH80753 ret, NAR65502 rings, NR40615 liner, NAR65507 orings] 4 4 RP711 NAR65502 Piston body Ring set Hyperformance 4 NR44161 Piston pin 8 4 NH80753 NR40615 Retainer piston pin Cylinder liner 4 NAR65507 Cylinder liner oring kit 4 NR40615K NR116253 Cylinder liner kit Cylinder liner shim Liner with orings [NR40615, NAR65507] .002 NAR74814 NAR74816 Bearing main pair Bearing main pair Standard NAR74817 Bearing main pair NAR74818 NAR77748 Bearing main pair Bearing thrust pair NAR77750 Bearing thrust pair NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 NAR77753 Flangeless, .030 Thrust washer set main Standard Thrust washer set main .007 O/S NAR45723 NAR46396 Bearing rod pair Bearing rod pair Standard .010 NAR46397 Bearing rod pair .020 4 NAR46398 NR30939 Bearing rod pair Bushing con rod .030 Honable 4 NR30939S Bushing con rod Borable, Optional useage for honable 4 NR46903 Bearing cam Standard BEARINGS 4 1 1 4 NAR77747 .010 .020 .030 Flangeless, Standard Flangeless, .010 GASKET & SEALS 1 NAR53035 Set overhaul Does not include crank seals 1 1 NAR53034 NAR30544 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP683 Set conversion Add to pan & head sets to create complete OH set 1 1 NR48292 NR49865 Gasket cylinder head Gasket valve cover 1 NR71917 Gasket oil pan 1 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 2 NR26297 Gasket manifold intake 1 1 NR97350 NR26058 Gasket fuel pump mtg Gasket rear seal hsg 1 NR26084 Gasket timing cover Endurance Power Products JD270-3 (800) 467-5545 John Deere 270 Late Diesel esn 280000 -> (Continued) 4 Cylinder Bore 4.250 Stroke 4.750 Block: R40620,R40700,R40910,R47520,R45950,R48430,R50610,R7 Rod: R26047, R52225, R58880, R69923 Piston: RE23168, RE40563 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve Camshaft kit [NR42351 cam, NR52773 lifters, NR45134] Uses 20 tooth tach drive R32426 (orginal cam used 15 tooth) CAMSHAFT 1 NAR44393 1 NR42351 Camshaft Camshaft, sold in kit only 8 1 NR52773 NR45134 Lifter Gear oil pump drive Mushroom style One piece gear and shaft (can replace NR32428 gear) 1 NR26115 Plug cam end VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 RP478 3020 tsn 123,000 -> 1 RP478B Valve kit Cast# R40540 Valve kit Same as RP478 - without seats 4 NR43679 Valve exhaust 1.715 head dia; 6.133 length; 0.372 stem dia; 45 degree; 1G 4 4 NR43883 NR43681 Valve intake Valve insert 1.902 head dia; 6.148 length; 0.372 stem dia; 44 degree; 2G Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree 4 NR43680 Valve insert 16 8 NT20077 NR26125 Valve lock Valve spring 4 AR41690 Valve seal 4 4 NR87627 NRE11410 Valve seal Rotocap 4 NR41412 Retainer valve spring 8 1 NT20129 RP364 Valve stem cap Bolt cylinder head set (4) NR88042, (3) NR88043, (6) NR88044, (5) NR88045 Crankshaft Marked R40570; Flange: Centering ring, 4 bolt hole, 2 dowels Remanufactured: Cast # R26047,R52225,R58880,R66923 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Umbrella seal Oring CRANKSHAFT 1 NAR40485 CONNECTING ROD 4 EAR70910 Connecting rod 8 NR66452 Bolt connecting rod OIL / LUBE SYSTEM 1 NR26151 Spring oil press regulato 1 AR32694 Oil cooler remanufactured FUEL / INJECTOR 4 NAR50781 Injector New, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 4 EAR50781 Injector Reman, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 4 4 NR60746 NR48000 Injector seal Injector seal 4 NR34765 Boot injector 8 1 NR34766 NRE42211 Clamp leak off line boot Includes NR97350 mounting gasket Fuel transfer pump Straight leak-off boot COOLING SYSTEM 1 NAR45332 1 NAR55617 Tractor: 3010, 3020 1 NAR55619 Tractor: 3010, 3020 1 NAR98564 NR36846 Water pump Water pump kit New (NR39503, NM42830, NM27548, NR28746) mkd R26337, R34977, R34982, R41315, R44122 Water pump kit Use with cast# R41315, R41318, R44122 [R40979, AR62933, JD9355, R26343, R26341] Use with cast# R26337, R27547, R34977, R34982 [R40979, AR62933, JD9212, R26343, R26341] Water pump kit Use with cast# R34964, R34974, R41316 [R40979, AR101549, JD9257, R26343, R26341] Thermostat 180 degree, 63mm Endurance Power Products JD270-3 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 276D Small pin Diesel Piston pin diameter 1.37 Tractor: 2630, 2640 Rod: R54617 Piston: AR63342 Crawler Dozer: 450G msn -> 299,999; 650G msn -> 299,999 Crawler loader: 455G Excavator: 490D ENGINE KITS RP208 RP177 Overhaul kit InFrame kit RP609 Underhaul kit CYLINDER KIT 4 NRE19831 Cylinder kit 4 NAR63342 Piston body 4 8 NR125754 NM41029 Piston pin Retainer piston pin 4 NRE66820 Ring set 4 4 NR121867 NAR65507 Cylinder liner Cylinder liner oring kit 4 NRE500024 Cylinder liner Liner and orings [NR121867, NAR65507] NR65833 Cylinder liner shim .004 [NAR63342 piston, NR125754 pin, NM41029 ret,NRE66820 rings, NR121867 liner, NAR65507] BEARINGS 4 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair 3 NR78598 Thrust washer main 1 NAR95932 4 NAR97517 NAR97653 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NAR97654 Bearing rod pair .020 4 NAR97655 NR57450 Bearing rod pair Bushing con rod .030 Honable, for 1.37 pin, use with rod cast# R54617 4 NR57450S Bushing con rod Borable, for 1.37 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 6 NR57160 Bushing balancer shaft 6 NR91708 Bushing balancer shaft Oversize OD 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 Std, use with flangeless thrust GASKET & SEALS 1 NRE501586 Set overhaul Does not include crank seals (Replaces NRE38599) 1 1 NRE38851 RP341 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP682 Set conversion Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 1 NR125863 NR73521 Gasket cylinder head Gasket valve cover 1 NR97342 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear Endurance Power Products seal with sleeve JD276-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 276D Small pin (Continued) Diesel Piston pin diameter 1.37 Rod: R54617 Piston: AR63342 CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 NR82820 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded 1 1 NR81514 NAR69710 Tach drive shaft Balancer shaft Helical gear style, 12 tooth; threaded RH assembly [NR54634 shaft, gear, key] 1 NAR69711 Balancer shaft LH assembly [NR54634 shaft, gear, key] NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD345 Valve kit Intake 45 deg, Exhaust 45 deg; 8 rotators 4 4 NR79624 NR89226 Valve exhaust Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 4 NR79623 Valve intake 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 4 4 NR51734 RP223 Valve insert Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 45 degree 16 NT20077 Valve lock 8 8 NR26125 NRE11410 Valve spring Rotocap 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 4 NR87627 Valve seal Oring 8 NT20129 Valve stem cap 1/2 x 4-1/4 [check length for proper bolts] R53223 Bolt cylinder head (18) used esn -> 355,345; (14) used esn 355,346 - 137,127 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 T20168 Washer head bolt 1/2 x 4-1/2, flanged head [check length for proper bolts] R85363 Bolt cylinder head (4) used esn 355,346 - 137,127; (18) used esn 137,128 -> CRANKSHAFT 1 1 NRE56792 NR81989 Crankshaft Sleeve crank seal Marked R54501, R108657; Flange: flat, 4 bolt holes, 1 dowel; Snout: 1 bolt hole, helical gear Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 4 EAR63023 Connecting rod Remanufactured: Cast# R54617 8 NR74195 Bolt connecting rod Use with rod casting# R54617, R56187 OIL / LUBE SYSTEM 1 NAR79464 Oil pump Oil pump with 2.000 gear, housing marked R54629 1 NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) FUEL / INJECTOR 4 NRE37503 Injector New, pencil type; Marked: 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087 4 ERE37503 Injector Reman, pencil type 4 NAT27622 s/n -> 508310 4 RP588 s/n 508311 -> 4 NR66090 s/n 508311 -> 1 NRE42211 Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD276-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 276D Big pin Diesel Piston pin diameter 1.62 Tractor: 2130 Loader: 344E Crawler Dozer: 450E; 450G msn -> 299,999; 650G msn -> 299,999 Loader backhoe: 410C, 510B Skidder: 340D, 440C Rod: R56187 Piston: AR68188 Crawler loader: 455E, 455G Excavator: 490D, 493D ENGINE KITS RP209 Overhaul kit RP178 InFrame kit RP609 Underhaul kit CYLINDER KIT 4 NRE19833 Cylinder kit 4 4 NAR68188 NR124230 Piston body Piston pin 8 NR54114 Retainer piston pin 4 4 NRE66820 NR121867 Ring set Cylinder liner 4 NAR65507 Cylinder liner oring kit 4 NRE500024 NR65833 Cylinder liner Cylinder liner shim [NAR68188 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] Liner and orings [NR121867, NAR65507] .004 BEARINGS 4 NRE27352 NRE27353 Bearing main pair Bearing main pair NRE27360 Bearing main pair NRE27368 NAT21139 Bearing main pair Bearing thrust pair NAT21132 Bearing thrust pair NAT21134 NAT21136 Bearing thrust pair Bearing thrust pair NAR81786 Bearing thrust pair NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair NAR81790 Bearing thrust pair 3 NR78598 1 4 NAR95932 NAR97517 NAR97653 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NAR97654 NAR97655 Bearing rod pair Bearing rod pair .020 .030 1 1 Standard .010 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 NR57451 Bushing con rod Honable, use w/ rod cast# R56187, R80032 4 1 NR57451S NT20034 Bushing con rod Bushing idler Borable, Optional useage for honable upper 1 NT26321 Bushing idler lower 6 6 NR57160 NR91708 Bushing balancer shaft Bushing balancer shaft Oversize OD GASKET & SEALS 1 1 NRE501586 NRE38851 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE38599) 1 RP341 Set oil pan Includes oil pump installation gaskets 1 1 RP682 NR125863 Set conversion Gasket cylinder head Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 NR73521 Gasket valve cover 1 1 NR97342 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front Endurance Power Products seal with sleeve JD276-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 276D Big pin (Continued) Diesel Piston pin diameter 1.62 1 NRE44574 Rod: R56187 Piston: AR68188 Seal crankshaft rear CAMSHAFT 1 1 RP197 NR82820 Camshaft kit Camshaft 8 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded 1 NAR69710 Balancer shaft RH assembly [NR54634 shaft, gear, key] 1 NAR69711 Balancer shaft LH assembly [NR54634 shaft, gear, key] Includes camshaft & lifters [NR82820, NT20073] Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 4 HKJD345 NR79624 Valve kit Valve exhaust Intake 45 deg, Exhaust 45 deg; 8 rotators 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 4 NR89226 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 4 4 NR79623 NR51734 Valve intake Valve insert 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 4 RP223 Valve insert Intake, 45 degree 16 8 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 8 NRE11410 Rotocap 4 8 NR87627 NT20129 Valve seal Valve stem cap Oring 1/2 x 4-1/4 [check length for proper bolts] R53223 Bolt cylinder head (18) used esn -> 355,345; (14) used esn 355,346 - 137,127 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 T20168 Washer head bolt 1/2 x 4-1/2, flanged head [check length for proper bolts] R85363 Bolt cylinder head (4) used esn 355,346 - 137,127; (18) used esn 137,128 -> CRANKSHAFT 1 NRE56792 Crankshaft Marked R54501, R108657; Flange: flat, 4 bolt holes, 1 dowel; Snout: 1 bolt hole, helical gear 1 NR81989 Sleeve crank seal Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 4 EAR66400 Connecting rod Remanufactured: Cast# R56187 8 NR74195 Bolt connecting rod Use with rod casting# R54617, R56187 OIL / LUBE SYSTEM 1 NAR79464 Oil pump Oil pump with 2.000 gear, housing marked R54629 1 NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) Injector New, pencil type; Marked: 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087 FUEL / INJECTOR 4 NRE37503 4 ERE37503 4 NAT27622 s/n -> 508310 4 RP588 s/n 508311 -> 4 NR66090 s/n 508311 -> 1 NRE42211 Reman, pencil type Injector Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD276-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 276T Diesel Piston pin diameter 1.62 Rod: R56187 Piston: AR96389 Tractor: 2130 Crawler Dozer: 450E; 450G msn -> 299,999; 550, 550A, 550B, 550G msn -> 299,999; 650G msn -> 299,999 Crawler Loader: 455E, 455G, 555, 555A, 555B; 555G msn -> 299,999 Excavator: 495D, 590D, 595, 595D Loader: 444E Loader backhoe: 410C, 510C, 610B, 610C Skidder: 340D, 440C, 440D, 448D, 540B, 540D, 548D ENGINE KITS RP210 Overhaul kit RP179 RP609 InFrame kit Underhaul kit CYLINDER KIT 4 4 NRE19832 NAR96389 Cylinder kit Piston body 4 NR124230 Piston pin 8 4 NR54114 NRE66820 Retainer piston pin Ring set 4 NR121867 Cylinder liner 4 NAR65507 NR65833 Cylinder liner oring kit Cylinder liner shim [NAR96389 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] .004 BEARINGS 4 NRE27352 NRE27353 Bearing main pair Bearing main pair NRE27360 Bearing main pair NRE27368 NAT21139 Bearing main pair Bearing thrust pair NAT21132 Bearing thrust pair NAT21134 NAT21136 Bearing thrust pair Bearing thrust pair NAR81786 Bearing thrust pair Flanged, .030 Flangeless, std NAR81788 Bearing thrust pair Flangeless, .010 NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair Flangeless, .020 Flangeless, .030 3 NR78598 Thrust washer main Std, use with flangeless thrust 1 4 NAR95932 NAR97517 NAR97653 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NAR97654 NAR97655 Bearing rod pair Bearing rod pair .020 .030 1 1 Standard .010 .020 .030 Flanged, std Flanged, .010 Flanged, .020 NR57451 Bushing con rod Honable, use w/ rod cast# R56187, R80032 4 1 NR57451S NT20034 Bushing con rod Bushing idler Borable, Optional useage for honable upper 1 NT26321 Bushing idler lower 6 6 NR57160 NR91708 Bushing balancer shaft Bushing balancer shaft Oversize OD GASKET & SEALS 1 1 NRE501568 NRE38851 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE37715) 1 RP341 Set oil pan Includes oil pump installation gaskets 1 1 RP682 NR125863 Set conversion Gasket cylinder head Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 NR73521 Gasket valve cover 1 1 NR97342 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front Endurance Power Products seal with sleeve JD276-3 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 276T (Continued) Diesel Piston pin diameter 1.62 1 NRE44574 Rod: R56187 Piston: AR96389 Seal crankshaft rear CAMSHAFT 1 1 RP197 NR82820 Camshaft kit Camshaft 8 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded 1 NAR69710 Balancer shaft RH assembly [NR54634 shaft, gear, key] 1 NAR69711 Balancer shaft LH assembly [NR54634 shaft, gear, key] Includes camshaft & lifters [NR82820, NT20073] Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 1 HKJD346 HKJD347 Valve kit Valve kit Intake 30 deg, Exhaust 45 deg; 8 rotators Intake 30 deg, Exhaust 30 deg; 8 rotators 4 NR79624 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 4 4 NR89226 NR83071 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G .372 stem dia; 30 degree 4 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 4 16 NR73064 NT20077 Valve insert Valve lock Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 8 4 NRE11410 NR87627 Rotocap Valve seal Oring 8 NT20129 Valve stem cap R53223 Bolt cylinder head (14) used esn -> 137,127 T20168 Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] R85363 Bolt cylinder head (4) used esn -> 137,127; (18) used esn 137,128 -> 1/2 x 4-1/2, flanged head [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 CRANKSHAFT 1 NRE56792 Crankshaft Marked R54501, R108657; Flange: flat, 4 bolt holes, 1 dowel; Snout: 1 bolt hole, helical gear 1 1 NR81989 NH35244 Sleeve crank seal Packing Front Front crank sleeve Connecting rod Bolt connecting rod Remanufactured: Cast# R56187 Use with rod casting# R54617, R56187 Oil pump Oil pump kit Oil pump with 2.000 gear, housing marked R54629 For pump with 2.000 gear, housing marked R54629 (replaces RP249) Injector Injector New, pencil type; Marked: 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087 CONNECTING ROD 4 8 EAR66400 NR74195 OIL / LUBE SYSTEM 1 1 NAR79464 NRE15940K FUEL / INJECTOR 4 4 NRE37503 ERE37503 4 NAT27622 s/n -> 508310 4 RP588 s/n 508311 -> 4 NR66090 s/n 508311 -> 1 NRE42211 Reman, pencil type Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM WPUMP1 WPUMP2 Endurance Power Products JD276-3 (800) 467-5545 John Deere 276T (Continued) Diesel Piston pin diameter 1.62 4 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: AR96389 TURBO / AIR TURBO TURBOCHARGER New or remanufactured available, call for pricing 1 1 R43724 R43724G Exhaust sleeve Exhaust sleeve 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing 2 702299C1 Turbo seal ring Endurance Power Products JD276-3 (800) 467-5545 Endurance Power Products JD276-3 (800) 467-5545 John Deere 6 Cylinder Bore 4.000 Stroke 4.000 301 / 4.9L Gas Block: R26060, R26070, R26090 Tractor: 4010 ENGINE KITS JD-4010-G1-IF JD-4010-G1-OF InFrame kit Overhaul kit 4010 Gas: Standard 4.000 bore; SL-2084 cylinder kit 4010 Gas: Standard 4.000 bore; SL-2084 cylinder kit JD-4010-G2-IF JD-4010-G2-OF InFrame kit Overhaul kit 4010 Gas: Overbore to 4.1875; AR52548 cylinder kit 4010 Gas: Overbore to 4.1875; AR52548 cylinder kit JD-4010-LPG Overhaul kit 4010 LP; Call for price and availability SL-2084 Cylinder kit 4.0000 bore, 4.620 barrel, 5.062 flange [2084P, SO-2084, 5834KX] Being discontinued: Use AR52548 AR52548 Cylinder kit 4.1875 bore, 4.620 liner barrel, 5.062 flange dia [2421P, SO-2421, 9597KX] 2084P Piston Discontinued, 4.0000 bore, 2.704 CD, D shaped dish, 7.8:1 CR; (3) 3/32, (2) 1/4 [R26089, R42186] 2421P Piston Discontinued, 4.1875 bore, 2.701 CD, 4.620 length, 1.250 pin dia; (3) 3/32, (2) 1/4 5834KX Ring set 4.0000 bore; (3) 3/32, (2) 1/4 [2 cyl set] [OE AR27851] 9597KX Ring set 4.1875 bore; (3) 3/32, (2) 1/4 [2 cyl set] SO-2084 Cylinder liner kit 4.0000 bore; 5.062 x 0.252 flange, 4.812 pilot, 8.000 length; (2) SLR-2023 [R26118] SO-2421 Cylinder liner kit 4.1875 bore; 5.062 x 0.252 flange, 4.813 pilot, 8.000 length; (2) SLR-2023 CYLINDER KIT BEARINGS JDBRG1 3 1 NAR49243 NAR77754 1 Upper and Lower halves: offset tangs Bearing main pair Bearing thrust pair Standard NAR77747 Flangeless, Standard Thrust washer set main Standard 3 1 NAR49245 NAR77756 Bearing main pair Bearing thrust pair .010 Flangeless, .010 3 1 NAR49246 NAR77757 Bearing main pair Bearing thrust pair .020 Flangeless, .020 3 1 NAR49247 NAR77758 Bearing main pair Bearing thrust pair .030 Flangeless, .030 1 NAR77753 Thrust washer set main .007 O/S 6 NAR45723 Bearing rod pair Standard 6 6 NAR46396 NAR46397 Bearing rod pair Bearing rod pair .010 .020 6 NAR46398 Bearing rod pair .030 4 NR46903 Bearing cam 6 3129YA20 Bushing con rod 1.252 ID, 1.3755 OD, 1.510 length GASKET & SEALS 1 HS3214VC Set cylinder head [OE: AR53623] 1 CS3846Y Set conversion Does not include crankshaft seals 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve Endurance Power Products JD301-1 (800) 467-5545 John Deere 301 / 4.9L Gas (Continued) 6 Cylinder Bore 4.000 Stroke 4.000 1 7937PT Gasket cylinder head 1 2 NR49866 NR83020 2 NR83021 Gasket valve cover Gasket manifold exhaust Double Gasket manifold exhaust Single 1 1 TCS45492 NR71918 Set timing cover Gasket oil pan Block: R26060, R26070, R26090 CAMSHAFT 1 12 NAR32732 NR26342 Camshaft kit Lifter [NR33778 cam, NR32428 oil pump gear] Uses 20 tooth tach drive R32426 (original cams used 15 tooth) 12 ER26342 Lifter Remanufactured Valve intake 1.688 head dia, 5.700 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26109] VALVE TRAIN 6 00659 6 00658 Valve exhaust 1.500 head dia, 5.731 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26108] 12 12 140-1897 2121111 Valve guide Valve spring 0.3745 ID, 0.6255 OD, 2.938 length, 11-P 2.156 free, 1.250 OD; 1.812@33, 1.375@90 24 NB367R Valve lock 6 6 AR26336 SB1750-2 Rotator Valve insert 6 SB1562-1N Valve insert Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree, use with 1.680 valve head dia. Exhaust: 1-5/16 ID, 1-9/16 OD, 7/32 depth COOLING SYSTEM 1 WPUMP1 WATER PUMP NR36846 Thermostat Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog 180 degree, 63mm JD301-1 (800) 467-5545 John Deere 6 Cylinder Bore 3.86 Stroke 4.33 303 Early Diesel Orings on liner; esn -> 158795 Loader: JD544 Motor Grader: JD570 Block: T24967, T24968 Rod: T20007 Piston: T23481 Skidder: JD540 ENGINE KITS RP283 RP280 Overhaul kit InFrame kit RP608 Underhaul kit CYLINDER KIT 6 RP264 Cylinder kit 6 NT23481 Piston body 6 12 NT23482 NR51112 Piston pin Retainer piston pin 6 NAR70633 Ring set 6 6 NAR51902 RP633 Cylinder liner Cylinder liner oring kit Liner (NR48635) with orings 3 seal rings, for liner with 2 grooves NRE27352 NRE27353 Bearing main pair Bearing main pair Standard .010 NRE27360 Bearing main pair .020 NRE27368 NAT21139 Bearing main pair Bearing thrust pair .030 NAT21132 Bearing thrust pair NAT21134 NAT21136 Bearing thrust pair Bearing thrust pair NAR81786 Bearing thrust pair NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair NAR81790 Bearing thrust pair 3 1 NR78598 NAR95932 6 NRE27348 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 Bearing rod pair .010 NRE27358 NRE27364 Bearing rod pair Bearing rod pair .020 .030 Grooves on liner [NT23481 pist, NT23482 pin, NR51112 ret, NAR70633 ring, NAR51902 liner, RP633] BEARINGS 6 1 1 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 6 NT23471 Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 6 1 NT23471S NT20034 Bushing con rod Bushing idler Borable, for 1.19 pin, optional useage for honable upper 1 NT26321 Bushing idler lower Does not include crank seals (Replaces NRE38568) GASKET & SEALS 1 NRE501572 Set overhaul 1 NRE38849 Set cylinder head 1 1 RP342 RP682 Set oil pan Set conversion 1 NR98462 Gasket cylinder head 1 1 NR75728 NR97344 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 1 NAR67942 NRE44574 Seal crankshaft front Seal crankshaft rear seal with sleeve Includes camshaft & lifters [NR82821, NT20073] Includes oil pump installation gaskets Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 CAMSHAFT 1 1 NRE53884 NR82821 Camshaft kit Camshaft 12 NT20073 Lifter Endurance Power Products Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 JD303-1 (800) 467-5545 John Deere 6 Cylinder Bore 3.86 Stroke 4.33 303 Early (Continued) Diesel Orings on liner; esn -> 158795 Block: T24967, T24968 Rod: T20007 Piston: T23481 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD360 Valve kit Intake 45 deg, Exhaust 45 deg; 12 retainers 6 6 NR79624 NR79623 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 6 24 RP223 NT20077 Valve insert Valve lock Intake, 45 degree 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 6 NR41412 NR87627 Retainer valve spring Valve seal Oring 12 NT20129 Valve stem cap 23 T20183 Bolt cylinder head use with block T24968, T32345 3 T23089 Bolt cylinder head use with block T24968, T32345 23 R53223 Bolt cylinder head use with block R53260 3 R53219 Bolt cylinder head use with block R53260 26 T20168 Washer head bolt 1/2 x 4 [check length for proper bolts] 1/2 x 4-3/4 [check length for proper bolts] 1/2 x 4-1/4 [check length for proper bolts] 1/2 x 5 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 CRANKSHAFT 1 NAT22562 Crankshaft Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway CONNECTING ROD 6 EAT18005 Connecting rod Remanufactured: Cast# T20007 12 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 FUEL / INJECTOR 6 NAR89564 6 EAR89564 6 NAT27622 s/n 108849 -> 6 NT23425 s/n -> 108848 18 NR34766 s/n -> 108848 1 NRE42211 Reman, pencil type Injector Injector line connector ki Hose barb type Boot injector Tee leak-off boot Clamp leak off line boot Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD303-1 (800) 467-5545 John Deere 6 Cylinder Bore 3.86 Stroke 4.33 303 Late Diesel Orings in block; esn 158796 -> Loader: JD544 Motor Grader: JD570 Block: R53260,R55035,R55351,R72970,R79280,T32346 Rod: T20007 Piston: T23481 Skidder: JD540 ENGINE KITS RP263 RP170 Overhaul kit InFrame kit RP608 Underhaul kit CYLINDER KIT 6 NAR71591 Cylinder kit 6 NT23481 Piston body 6 12 NT23482 NR51112 Piston pin Retainer piston pin 6 NAR70633 Ring set 6 6 NT32340 NAR71617 Cylinder liner Cylinder liner oring kit 6 NT324340K Cylinder liner Liner with orings [NT32340, NAR71617] NR46905 Cylinder liner shim .004 Grooves in blk [NT23481 pist, NT23482 pin, NR51112 ret, NAR70633 ring, NT32340 liner, NAR71617] BEARINGS 6 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair 3 NR78598 Thrust washer main 1 NAR95932 6 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 6 NRE27364 NT23471 Bearing rod pair Bushing con rod .030 Honable, for 1.19 pin, use with rod cast# R81410, T20007 6 NT23471S Bushing con rod Borable, for 1.19 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 Std, use with flangeless thrust GASKET & SEALS 1 1 NRE501572 NRE38849 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE38568) 1 RP342 Set oil pan Includes oil pump installation gaskets 1 1 RP682 NR98462 Set conversion Gasket cylinder head Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 NR75728 Gasket valve cover 1 1 NR97344 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit Endurance Power Products Includes camshaft & lifters [NR82821, NT20073] JD303-2 (800) 467-5545 John Deere 6 Cylinder Bore 3.86 Stroke 4.33 303 Late (Continued) Diesel Orings in block; esn 158796 -> Block: R53260,R55035,R55351,R72970,R79280,T32346 Rod: T20007 Piston: T23481 1 NR82821 Camshaft 12 1 NT20073 NR81513 Lifter Tach drive shaft 1 NR81514 Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded 1 CYLHEAD HKJD360 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Intake 45 deg, Exhaust 45 deg; 12 retainers 6 NR79624 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 6 NR79623 NR51734 Valve intake Valve insert 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 VALVE TRAIN 6 RP223 Valve insert Intake, 45 degree 24 12 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NR41412 Retainer valve spring 6 12 NR87627 NT20129 Valve seal Valve stem cap 23 T20183 Bolt cylinder head use with block T24968, T32345 3 T23089 Bolt cylinder head use with block T24968, T32345 23 R53223 Bolt cylinder head use with block R53260 3 R53219 Bolt cylinder head use with block R53260 26 T20168 Washer head bolt Oring 1/2 x 4 [check length for proper bolts] 1/2 x 4-3/4 [check length for proper bolts] 1/2 x 4-1/4 [check length for proper bolts] 1/2 x 5 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 CRANKSHAFT 1 NAT22562 Crankshaft Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway CONNECTING ROD 6 EAT18005 Connecting rod Remanufactured: Cast# T20007 12 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) FUEL / INJECTOR 6 NAR89564 Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 6 EAR89564 Injector Reman, pencil type 6 1 NAT27622 NRE42211 Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump COOLING SYSTEM WPUMP1 WPUMP2 WATER PUMP WATER PUMP KIT Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog JD303-2 (800) 467-5545 John Deere 6 Cylinder Bore 3.860 Stroke 4.330 303 / 5.0L Gas Tractor: 4030 Combine: 55, 95; 6600 early Cotton picker: 699 Piston: T24891 Loader: JD544 CYLINDER KIT 3.8600 bore, 3 sealing rings: 2 grooves on sleeve [2242026, S40726, 2264529] 6 2261525 Cylinder kit Loader: JD544 early; Combine 55, 95, 6600: esn -> 157,228 3.8600 bore, 3 sealing rings: no grooves on sleeve [2242026, S40726, 2264528] 6 2261522 Cylinder kit Tractor: 4030; Loader: JD544 late; Combine 55, 95, 6600: esn 157,229 -> 6 2242026 Piston 3.8600 bore, 2.2535 CD, 4.000 length, 1.878 pin, cup, 7.6:1 CR; (2) 3/32, (1) 0.197 [T24891] 6 S40726 Ring set 3.8600 bore; (2) 3/32, (1) 0.197 [1 cyl set] 6 6 2264529 2264528 Cylinder liner kit Cylinder liner kit Grv on slv; 3.860 bore, 4.8415 x 0.238 flange, 4.450 barrel, 4.2365 seal OD, 4.5293 pilot OD Grv in blck; 3.860 bore, 4.8410 x 0.238 flange, 4.440 barrel, 4.2360 seal OD, 4.5280 pilot OD 6 6 2237164 2237163 Cylinder liner oring kit Cylinder liner oring kit 3 seal rings, for liner with 2 grooves 3 seal rings, for liner with no grooves BEARINGS 3 1 NRE27352 NAT21139 Bearing main pair Bearing thrust pair Standard 3 1 NRE27353 NAT21132 Bearing main pair Bearing thrust pair .010 3 NRE27360 Bearing main pair .020 1 NAT21134 Bearing thrust pair Flanged, .020 3 NRE27368 Bearing main pair .030 1 NAT21136 Bearing thrust pair Flanged, .030 6 NRE27348 Bearing rod pair Standard 6 6 NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 6 NRE27364 Bearing rod pair .030 6 NT23471 Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 Flanged, std Flanged, .010 GASKET & SEALS 1 1 HS3801 CS3901 Set cylinder head Set conversion Does not include crank seals: Order NAR67942, NRE44574 1 NAR67942 Seal crankshaft front seal with sleeve 1 NRE44574 1 NR97344 All except 4030 1 NR97345 For 4030 Seal crankshaft rear Gasket oil pan 1 1 NR98462 NR75728 Gasket cylinder head Gasket valve cover 1 TCS45614 Set front cover Gasket oil pan CAMSHAFT 1 1 NRE53884 NR82821 Camshaft kit Camshaft 12 NT20073 Lifter Endurance Power Products Includes camshaft & lifters [NR82821, NT20073] Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 JD303-3 (800) 467-5545 John Deere 303 / 5.0L Gas (Continued) 6 Cylinder Bore 3.860 Stroke 4.330 Piston: T24891 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded Valve intake 1.772 head dia, 5.312 length, 0.372 stem dia, 45 degree, 2G VALVE TRAIN 6 2111940 6 2111943 Valve exhaust 1.457 head dia, 5.322 length, 0.372 stem dia, 45 degree, 1G 6 12 01305S NR26125 Valve exhaust Valve spring 1.457 head dia, 5.322 length, 0.3720 stem dia, 0.2725 tip to grv, 45 deg 1G, stellite 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 24 NT20077 Valve lock 12 12 NR87627 140-7248 Valve seal Valve guide Oring 0.3750 ID, 0.5640 OD, 2.750 length, plain, 1-SR, iron (optional, recommended) 12 140-9115 Valve guide 0.3750 ID, 0.5020 OD, 2.750 length, plain, 1-SR, iron (spiral ID conversion guide) 6 6 SB1562-4 SB1812-4 Valve insert Valve insert Intake, 1-5/16 ID, 1-9/16 OD, 1/4 depth, 45 degree, use with 1.480 valve head dia Intake, 1-9/16 ID, 1-13/16 OD, 7/32 depth, 45 degree COOLING SYSTEM 1 WPUMP1 NAR48675 WATER PUMP Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 1 NAR70601 Thermostat 180 degree (housing marked R60257) 1 NAR77411 Thermostat 195 degree (housing marked R60257) Endurance Power Products JD303-3 (800) 467-5545 John Deere 2 Cylinder Bore 5.500 Stroke 6.375 303 / 5.0L Gas Tractor: 620, 630 CYLINDER KIT 1 1 SP145STD SP145045 Rebore kit Rebore kit 5.500 bore; Piston, rings, pins retainers [2 cyl set] .045 oversize; Piston, rings, pins retainers [2 cyl set] 1 SP145090 Rebore kit .090 oversize; Piston, rings, pins retainers [2 cyl set] 1 SP145125 Rebore kit .125 oversize; Piston, rings, pins retainers [2 cyl set] 2 S40338 Ring set 5.500 bore; (4) 1/8, (2) 1/4 [1 cyl set] 2 2 S40338045 S40338090 Ring set Ring set .045; (4) 1/8, (2) 1/4 [1 cyl set] .090; (4) 1/8, (2) 1/4 [1 cyl set] 2 S40338125 Ring set .125; (4) 1/8, (2) 1/4 [1 cyl set] 1 2C7171 Ring set 5.500 bore; (3) 1/8, (2) 1/4 [2 cyl set] 1 2C7171 040 Ring set .040; (3) 1/8, (2) 1/4 BEARINGS 2 CB643P Bearing rod pair Std, 3.3735/3.3750 shaft, 3.5665/3.5675 hsg bore, 2.110 length [AA6810R] 2 CB643P10 Bearing rod pair .010 Set cylinder head [AA7354R] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog GASKET & SEALS 1 HS7408S COOLING SYSTEM WPUMP1 Endurance Power Products JD303-4 (800) 467-5545 Endurance Power Products JD303-4 (800) 467-5545 John Deere 309 / 5.1L Gas Early A: 6.500 stroke 2 Cylinder Bore 5.500 Stroke 6.500 Tractor: A: s/n -> 487,999; AO/AR: sn -> 259,999 CYLINDER KIT 2 2 S7626 S7626045 Ring set Ring set 5.500 bore; (4) 1/4, (2) 1/4 [1 cyl set] [AA2047R] .045; (4) 1/4, (2) 1/4 [1 cyl set] GASKET & SEALS 1 FS7380S Set overhaul COOLING SYSTEM WPUMP1 WATER PUMP Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog JD309-1 (800) 467-5545 Endurance Power Products JD309-1 (800) 467-5545 John Deere 2 Cylinder Bore 5.500 Stroke 6.750 321 / 5.3L Gas Late A: 6.750 stroke Tractor: A: s/n 488,000 -> ; AO/AR: sn 260,000 -> ; 60 CYLINDER KIT 5.5000 bore, 5.625 CD, 8.312 length, 1.750 pin; (4) 3/16, (1) 15/16 2 2242767 Piston A Gas: sn 584,000 -> ; AO/AR Gas: sn 272,000 -> ; 60 all .045 2 2242767045 Piston .090 2 2242767090 Piston .125 2 2242767125 Piston 2 2 S40244 S40244045 Ring set Ring set 5.5000 bore, Std; (4) 3/16, (1) 5/16 [1 cyl set] [AA4922R, AA4079R] .045; (4) 3/16, (1) 5/16 [1 cyl set] 2 S40244090 Ring set .090; (4) 3/16, (1) 5/16 [1 cyl set] 2 S40244125 Ring set .125; (4) 3/16, (1) 5/16 [1 cyl set] 2 S7626 Ring set 5.500 bore; (4) 1/4, (2) 1/4 [1 cyl set] [AA2047R] 2 S7626045 Ring set .045; (4) 1/4, (2) 1/4 [1 cyl set] BEARINGS 2 CB468P Bearing rod pair Std, 2.9985/3.000 shaft, 3.1500/3.1510 hsg bore, 1.850 length [AA5351R] 2 2 CB468P20 9759 Bearing rod pair Bushing con rod .020 1.750 ID, 1.895 OD, 2.500 length GASKET & SEALS 1 FS7744-1 Set overhaul A: sn 488,000 - 583,999; AO/AR sn 260,000 - 281,999 1 FS7744SBX Set overhaul A: sn 584,000 -> 1 FS7738B Set overhaul 60 tractor 1 HS7744SBX Set cylinder head A: sn 488,000 -> ; AO/AR sn 260,000 - 281,999 1 HS7738B Set cylinder head 60 tractor [A3229R] 1 7744SBX Gasket cylinder head A: sn 488,000 -> ; AO/AR sn 260,000 - 281,999 VALVE TRAIN 2 2 2111104 2111153 Valve intake Valve exhaust 4 2173644 Valve guide 1.985 head dia, 7.805 length, 0.4970 stem dia, 45 deg, 1G [A3618R] 0.500 ID, 0.8780 OD, 4.750 length, stepped [A2467R] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog [A4193R] COOLING SYSTEM WPUMP1 Endurance Power Products JD321-1 (800) 467-5545 Endurance Power Products JD321-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.02 Stroke 4.33 329 Early 1 Diesel 1.19 pin, orings on liner; esn -> 277548 Rod: T20007 Piston: AR55984, RE53265 Tractor: 3030, 3120, 3130, 4030 European Tractor: 950, 955, 4080 Combine: 4400, 4420 Cotton Picker/Stripper: 484, 499, 699, 9900 Loader: 444D, JD544A; JD544 European Loader backhoe: 710B Motor Grader: 570A, JD570 Skidder: JD540A ENGINE KITS RP294 Overhaul kit For 4030 tractor also order oil pan gasket NR97345 RP291 InFrame kit For 4030 tractor also order oil pan gasket NR97345 RP608 Underhaul kit For 4030 tractor also order oil pan gasket NR97345 CYLINDER KIT 6 6 RP288 NRE53265 Cylinder kit Piston body 6 NT26149 Piston pin 12 6 NR51112 NAR55759 Retainer piston pin Ring set 6 NAR51903 Cylinder liner 6 RP634 Cylinder liner oring kit Grooves on liner [NRE53265 pist, NT26149 pin, NR51112 ret, NAR55759 ring, NAR51903 liner, RP634] Liner (NR48636) with orings; 2 oring grooves on liner BEARINGS 6 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 6 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 6 NRE27364 NT23471 Bearing rod pair Bushing con rod .030 Honable, for 1.19 pin, use with rod cast# R81410, T20007 6 NT23471S Bushing con rod Borable, for 1.19 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 NRE501581 Set overhaul For 4030 tractor also order oil pan gasket NR97345 1 NRE38852 Set cylinder head Does not include crank seals (Replaces NRE38859) 1 RP342 Set oil pan For 4030 tractor also order oil pan gasket NR97345 1 RP682 Set conversion Includes oil pump installation gaskets 1 1 NR114157 NR75728 1 NR97344 All except 4030 tractor 1 NR97345 For 4030 tractor 1 NR97350 Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 Gasket cylinder head Gasket valve cover Gasket oil pan Gasket oil pan Gasket fuel pump mtg Endurance Power Products JD329-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.02 Stroke 4.33 329 Early 1 (Continued) Diesel 1.19 pin, orings on liner; esn -> 277548 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear Rod: T20007 Piston: AR55984, RE53265 seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit Includes camshaft & lifters [NR82821, NT20073] 1 NR82821 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 12 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD360 Valve kit Intake 45 deg, Exhaust 45 deg; 12 retainers 6 6 NR79624 NR79623 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 6 6 RP223 NR73064 Valve insert Valve insert Intake, 45 degree Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 24 NT20077 Valve lock 12 12 NR26125 NR41412 Valve spring Retainer valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NR87627 Valve seal Oring Valve stem cap Bolt cylinder head 1/2 x 4 [check length for proper bolts] Bolt cylinder head 1/2 x 4-3/4 [check length for proper bolts] Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] Bolt cylinder head 1/2 x 5 [check length for proper bolts] Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 Crankshaft Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway Connecting rod Bolt connecting rod Remanufactured: Cast# T20007 Use with rod casting# R51727, R58979, R81410, T20007 Oil pump with 1.625 gear, housing marked R54615 12 NT20129 23 T20183 use with block T24968 3 T23089 use with block T24968 23 R53223 use with block R53260 3 R53219 use with block R53260 26 T20168 CRANKSHAFT 1 NAT22562 CONNECTING ROD 6 12 EAT18005 NR74194 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K Oil pump Oil pump kit 1 NRE31929 Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 10 plate (Also order RP386 installation kit) FUEL / INJECTOR 6 NAR89564 Injector 6 EAR89564 Injector 6 1 NAT27622 NRE42211 Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump 1 NAH130127 Combine: 4400, 4420 New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type Fuel pump electric COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD329-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.02 Stroke 4.33 329 Early 2 Diesel 1.19 pin, orings in block; esn -> 277548 Rod: T20007 Piston: AR55984, RE53265 Tractor: 3030, 3120, 3130, 4030 European Tractor: 950, 955, 4080 Combine: 4400, 4420 Cotton Picker/Stripper: 484, 499, 699, 9900 Loader: 444D, JD544A; JD544 European Loader backhoe: 710B Motor Grader: 570A, JD570 Skidder: JD540A ENGINE KITS RP204 Overhaul kit For 4030 tractor also order oil pan gasket NR97345 RP173 InFrame kit For 4030 tractor also order oil pan gasket NR97345 RP608 Underhaul kit For 4030 tractor also order oil pan gasket NR97345 CYLINDER KIT 6 6 NAR71593 NRE53265 Cylinder kit Piston body 6 NT26149 Piston pin 12 6 NR51112 NAR55759 Retainer piston pin Ring set 6 NR116463 Cylinder liner No seal grooves on liner 6 6 NAR71618 NR116463K Cylinder liner oring kit Cylinder liner kit 3 seal rings, for liner with no grooves Liner with orings [NR116463, NAR71618] NR46906 Cylinder liner shim .004 NRE27352 Bearing main pair NRE27353 Bearing main pair Standard .010 NRE27360 NRE27368 Bearing main pair Bearing main pair NAT21139 Bearing thrust pair NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Grooves in blk [NRE53265 pis, NT26149 pin, NR51112 ret, NAR55759 ring, NR116463 liner, NAR71618] BEARINGS 6 1 .020 .030 Flanged, std Flanged, .010 NAT21136 Bearing thrust pair Flanged, .020 Flanged, .030 NAR81786 Bearing thrust pair Flangeless, std NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair Flangeless, .010 Flangeless, .020 NAR81790 Bearing thrust pair Flangeless, .030 3 1 NR78598 NAR95932 6 NRE27348 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair .010 .020 NRE27364 Bearing rod pair .030 6 6 NT23471 NT23471S Bushing con rod Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 Borable, for 1.19 pin, optional useage for honable 1 NT20034 Bushing idler upper 1 NT26321 Bushing idler lower 1 GASKET & SEALS 1 NRE501581 Set overhaul For 4030 tractor also order oil pan gasket NR97345 1 NRE38852 Set cylinder head Does not include crank seals (Replaces NRE38859) 1 RP342 Set oil pan For 4030 tractor also order oil pan gasket NR97345 1 RP682 Set conversion Includes oil pump installation gaskets 1 NR114157 Gasket cylinder head 1 NR75728 Gasket valve cover 1 NR97344 All except 4030 tractor Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 Gasket oil pan Endurance Power Products JD329-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.02 Stroke 4.33 329 Early 2 (Continued) Diesel 1.19 pin, orings in block; esn -> 277548 1 NR97345 For 4030 tractor 1 NR97350 1 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 Seal crankshaft rear NRE44574 Rod: T20007 Piston: AR55984, RE53265 Gasket oil pan seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit Includes camshaft & lifters [NR82821, NT20073] 1 NR82821 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 12 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD360 Valve kit Intake 45 deg, Exhaust 45 deg; 12 retainers 6 6 NR79624 NR79623 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 6 6 RP223 NR73064 Valve insert Valve insert Intake, 45 degree 24 NT20077 Valve lock 12 12 NR26125 NR41412 Valve spring Retainer valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NR87627 Valve seal Oring Valve stem cap Bolt cylinder head 1/2 x 4 [check length for proper bolts] Bolt cylinder head 1/2 x 4-3/4 [check length for proper bolts] Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] Bolt cylinder head 1/2 x 5 [check length for proper bolts] Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 Crankshaft Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway Connecting rod Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 12 NT20129 23 T20183 use with block T24968 3 T23089 use with block T24968 23 R53223 use with block R53260 3 R53219 use with block R53260 26 T20168 Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree CRANKSHAFT 1 NAT22562 CONNECTING ROD 6 12 EAT18005 NR74194 Remanufactured: Cast# T20007 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K Oil pump Oil pump kit 1 NRE31929 Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 10 plate (Also order RP386 installation kit) Injector Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 Reman, pencil type Oil pump with 1.625 gear, housing marked R54615 FUEL / INJECTOR 6 6 NAR89564 EAR89564 6 NAT27622 1 NRE42211 1 NAH130127 Combine: 4400, 4420 Injector line connector ki Hose barb type Includes NR97350 mounting gasket Fuel transfer pump Fuel pump electric COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog Endurance Power Products JD329-2 (800) 467-5545 John Deere 329 Early 2 (Continued) Diesel 1.19 pin, orings in block; esn -> 277548 6 Cylinder Bore 4.02 Stroke 4.33 Rod: T20007 Piston: AR55984, RE53265 TURBO / AIR TURBO TURBOCHARGER Endurance Power Products New or remanufactured available, call for pricing JD329-2 (800) 467-5545 Endurance Power Products JD329-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.02 Stroke 4.33 329 Late Diesel 1.37 pin, orings in block; esn 277549 -> Rod: R51727 Piston: AR78310, AR77762 Tractor: 2840, 3030, 3130, 4030 European Tractor: 950, 955, 4080 Combine: 4400, 4420, 6600 Cotton Picker/Stripper: 484, 499, 699, 9900 Loader: 444C, 444CH, 444D, JD444, JD544A; JD544 European Loader backhoe: 710B Motor Grader: 570A, JD570 Skidder: JD540A ENGINE KITS RP207 Overhaul kit Standard, For 4030 tractor also order oil pan gasket NR97345 RP721 Overhaul kit High Compression, For 4030 tractor also order oil pan gasket NR97345 RP176 RP718 InFrame kit InFrame kit Standard, For 4030 tractor also order oil pan gasket NR97345 High Compression, For 4030 tractor also order oil pan gasket NR97345 RP608 Underhaul kit For 4030 tractor also order oil pan gasket NR97345 CYLINDER KIT 6 NRE53321 Cylinder kit Std comp [NAR77762 pist, NR125754 pin, NM41029 ret, NAR55759 ring, NR116463 liner, NAR71618] 6 6 NAR77762 NRE53322 Piston body Cylinder kit Std compression High comp [NAR87736 pist, NR125754 pin, NM41029 ret, NAR55759 ring, NR116463 liner, NAR71618] 6 NAR87736 Piston body High compression 6 12 NR125754 NM41029 Piston pin Retainer piston pin 6 NAR55759 Ring set 6 6 NR116463 NAR71618 Cylinder liner Cylinder liner oring kit 6 NR116463K Cylinder liner kit 3 seal rings, for liner with no grooves Liner with orings [NR116463, NAR71618] NR46906 Cylinder liner shim .004 No seal grooves on liner BEARINGS 6 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair .020 .030 NAT21139 Bearing thrust pair Flanged, std NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Flanged, .010 Flanged, .020 NAT21136 Bearing thrust pair Flanged, .030 NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 6 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 6 NRE27364 NR55647 Bearing rod pair Bushing con rod .030 Honable, for 1.37 pin, use with rod cast# R51727, R80034 6 NR55647S Bushing con rod Borable, for 1.37 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 GASKET & SEALS 1 NRE501581 Set overhaul For 4030 tractor also order oil pan gasket NR97345 1 NRE38852 Set cylinder head Does not include crank seals (Replaces NRE38859) 1 RP342 Set oil pan For 4030 tractor also order oil pan gasket NR97345 1 RP682 Set conversion Includes oil pump installation gaskets 1 NR114157 Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 Gasket cylinder head Endurance Power Products JD329-3 (800) 467-5545 John Deere 6 Cylinder Bore 4.02 Stroke 4.33 329 Late (Continued) Diesel 1.37 pin, orings in block; esn 277549 -> 1 NR75728 Gasket valve cover 1 NR97344 All except 4030 tractor 1 NR97345 For 4030 tractor 1 NR97350 1 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 Seal crankshaft rear NRE44574 Rod: R51727 Piston: AR78310, AR77762 Gasket oil pan Gasket oil pan seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit Includes camshaft & lifters [NR82821, NT20073] 1 NR82821 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 12 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Intake 45 deg, Exhaust 45 deg; 12 retainers VALVE TRAIN CYLHEAD 1 HKJD360 Valve kit 6 6 NR79624 NR79623 Valve exhaust Valve intake 6 NR51734 Valve insert 6 6 RP223 NR73064 Valve insert Valve insert 24 NT20077 Valve lock 12 12 NR26125 NR41412 Valve spring Retainer valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NR87627 Valve seal Oring 12 NT20129 Valve stem cap 23 T20183 use with block T24968 3 T23089 use with block T24968 23 R53223 use with block R53260 3 R53219 use with block R53260 26 T20168 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 45 degree Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree Bolt cylinder head 1/2 x 4 [check length for proper bolts] Bolt cylinder head 1/2 x 4-3/4 [check length for proper bolts] Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] Bolt cylinder head 1/2 x 5 [check length for proper bolts] Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 Crankshaft Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway CRANKSHAFT 1 NAT22562 1 NAR57241 Combine: 6600 Damper vibration CONNECTING ROD 6 ER55978 Connecting rod Remanufactured: Cast# R51727 6 ERE21076 Connecting rod Remanufactured: Cast# R80034 12 12 NR74194 NR80033 Bolt connecting rod Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K Oil pump Oil pump kit Oil pump with 1.625 gear, housing marked R54615 For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NRE31929 Oil cooler 10 plate (Also order RP386 installation kit) FUEL / INJECTOR 6 NAR89564 Injector New, pencil; 18457,18717,18742,19762,20500,20631,22042,222202,22203,27333,27334,28481 6 EAR89564 Injector Reman, pencil type Endurance Power Products JD329-3 (800) 467-5545 John Deere 329 Late (Continued) Diesel 1.37 pin, orings in block; esn 277549 -> 6 NAT27622 s/n -> 505383 6 RP588 s/n 505384 -> 6 NR66090 s/n 505384 -> 1 NRE42211 6 Cylinder Bore 4.02 Stroke 4.33 Rod: R51727 Piston: AR78310, AR77762 Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket 1 NAH130127 Fuel pump electric Combine: 4400, 4420, 6600 COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD329-3 (800) 467-5545 Endurance Power Products JD329-3 (800) 467-5545 John Deere 6 Cylinder Bore 4.020 Stroke 4.328 329 / 5.4L Gas Combine: 6600 Cotton Picker: 499, 699 Piston: T30014 Cotton Striper: 482 CYLINDER KIT 6 6 T30014 S41260 Piston body Ring set [OEM] 4.0157 bore; (2) 3/32, (1) 0.197 [1 cyl set] Liner (NR48636) with orings; 2 oring grooves on liner 6 NAR51903 Cylinder liner 499, 699: engines NB-G, NB-L: esn -> 163,736 No seal grooves on liner 6 NR116463 Cylinder liner Combine 6600: All; 482 Stripper: All; 499, 699: engines NB-G, NB-L: esn 163,737 -> 6 RP633 Cylinder liner oring kit 3 seal rings, for liner with 2 grooves 499, 699: engines NB-G, NB-L: esn -> 163,736 6 NAR71618 Cylinder liner oring kit 3 seal rings, for liner with no grooves Combine 6600: All; 482 Stripper: All; 499, 699: engines NB-G, NB-L: esn 163,737 -> BEARINGS 3 NRE27352 Bearing main pair Standard 1 NAT21139 Bearing thrust pair Flanged, std 3 NRE27353 Bearing main pair .010 1 NAT21132 Bearing thrust pair Flanged, .010 3 NRE27360 Bearing main pair .020 1 NAT21134 Bearing thrust pair Flanged, .020 3 NRE27368 Bearing main pair .030 1 NAT21136 Bearing thrust pair Flanged, .030 6 NRE27348 Bearing rod pair Standard 6 NRE27349 Bearing rod pair .010 6 6 NRE27358 NRE27364 Bearing rod pair Bearing rod pair .020 .030 6 NT23471 Bushing con rod Honable, for 1.19 pin, use with rod cast# R81410, T20007 GASKET & SEALS 1 HS3901 Set cylinder head 1 1 RP682 NR75728 Set conversion Gasket valve cover Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 NAR67942 Seal crankshaft front seal with sleeve 1 1 NRE44574 TCS45614 Seal crankshaft rear Set front cover 1 NR97344 Gasket oil pan CAMSHAFT 1 NR82821 Camshaft 12 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 Helical gear style, 12 tooth; threaded VALVE TRAIN 6 2111940 Valve intake 1.772 head dia, 5.312 length, 0.372 stem dia, 45 degree, 2G 6 6 2111943 01305S Valve exhaust Valve exhaust 1.457 head dia, 5.322 length, 0.372 stem dia, 45 degree, 1G 1.457 head dia, 5.322 length, 0.3720 stem dia, 0.2725 tip to grv, 45 deg 1G, stellite 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Valve lock Valve retainer [OEM] 24 NT20077 6 T20169 Intake Endurance Power Products JD329-4 (800) 467-5545 John Deere 329 / 5.4L Gas (Continued) 6 T20287 Exhaust 6 NR87627 Intake 6 Cylinder Bore 4.020 Stroke 4.328 Piston: T30014 Rotator Valve seal Oring WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD329-4 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.000 341 / 5.6L Gas Block: R33170, R40017, R40880; REPL: R40940, R49550 Tractor: 4020 sn -> 200,999 ENGINE KITS JD-4020-G1-IF JD-4020-G1-OF InFrame kit Overhaul kit 4020 Gas sn -> 200,999 except block# R40940, R49550; SL-2279 cylinder kit 4020 Gas sn -> 200,999 except block# R40940, R49550; SL-2279 cylinder kit JD-4020-LP-IF JD-4020-LP-OF InFrame kit Overhaul kit 4020 LP sn -> 200,999 except block marked R40940, R49550; SL-2454 cylinder kit 4020 LP sn -> 200,999 except block marked R40940, R49550; SL-2454 cylinder kit CYLINDER KIT 6 SL-2279 Cylinder kit Gas except block marked: R40940, R49550 6 SL-2707 Cylinder kit Gas with block marked: R40940, R49550 6 SL-2454 Cylinder kit LPG except block marked: R40940, R49550 6 SL-2708 Cylinder kit LPG with block marked: R40940, R49550 4.2500 bore, 4.810 liner barrel, 5.125 flange dia, 2 seal rings in block [2279P, SO-2279, 5589KX] 6 6 2279P 2454P Piston Piston Discontinued, 4.2500 bore, 2.652 CD, 1.250 pin dia, 7.5:1 CR; (3) 3/32, (1) 1/4 [R33372, R34617] 3 5589KX Ring set 4.2500 bore; (3) 3/32, (1) 1/4 [2 cyl set] [OE AR34394] 3 9541KX Ring set 4.2500 bore; (3) 3/32, (2) 1/4 [2 cyl set] 6 SO-2279 Cylinder liner kit 4.2500 bore; 5.125 x 0.252 flange, 4.875 pilot, seal rings in block (1) SLR-2024, (1) SLR-2243 [R33197] 6 SO-2546 Cylinder liner kit 4.2500 bore; 5.178 x 0.252 flange, 4.921 pilot, 1 seal ring in block (1) SLR-2479, (1) SLR-2520 Discontinued; 4.2500 bore, 4.840 barrel, 5.178 flange, 1 seal grv in block [2279P, SO-2546, 5589KX] 4.2500 bore, 4.810 liner barrel, 5.125 flange dia, 2 seal rings in block [2454P, SO-2279, 5589KX] Discontinued; 4.2500 bore, 4.840 barrel, 5.178 flange, 1 seal grv in block [2454P, SO-2546, 5589KX] Discontinued, 4.2500 bore, 2.655 CD, 1.250 pin dia, flat topt; (3) 3/32, (1) 1/4 [R33374, R40778] BEARINGS JDBRG1 except block marked: R40940, R49550 3 NAR49243 Bearing main pair Upper and Lower halves: offset tangs 1 NAR77754 Bearing thrust pair Flangeless, Standard 1 NAR77747 Thrust washer set main Standard 3 NAR49245 Bearing main pair .010 1 NAR77756 Bearing thrust pair Flangeless, .010 3 NAR49246 Bearing main pair .020 1 NAR77757 Bearing thrust pair Flangeless, .020 3 NAR49247 Bearing main pair .030 1 NAR77758 Bearing thrust pair Flangeless, .030 Standard Upper half offset tang, Lower half center tang with block marked: R40940, R49550 3 NAR74814 Bearing main pair 1 NAR77748 Bearing thrust pair Standard Flangeless, Standard 1 NAR77747 Thrust washer set main Standard 3 NAR74816 Bearing main pair .010 1 NAR77750 Bearing thrust pair Flangeless, .010 3 NAR74817 Bearing main pair .020 1 NAR77751 Bearing thrust pair Flangeless, .020 Endurance Power Products JD341-1 (800) 467-5545 John Deere 341 / 5.6L Gas (Continued) 6 Cylinder Bore 4.250 Stroke 4.000 Block: R33170, R40017, R40880; REPL: R40940, R49550 3 NAR74818 Bearing main pair .030 1 NAR77752 Bearing thrust pair Flangeless, .030 1 NAR77753 Thrust washer set main .007 O/S 6 NAR45723 Bearing rod pair Standard 6 NAR46396 Bearing rod pair .010 6 6 NAR46397 NAR46398 Bearing rod pair Bearing rod pair .020 .030 4 NR46903 Bearing cam 6 3129YA20 Bushing con rod 1.252 ID, 1.3755 OD, 1.510 length GASKET & SEALS 1 HS3214VC Set cylinder head [OE: AR53623] 1 CS3846Y Set conversion Does not include crankshaft seals 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve 1 7937PT Gasket cylinder head 1 NR49866 Gasket valve cover 2 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 1 TCS45492 Set timing cover 1 NR71918 Gasket oil pan CAMSHAFT 1 NAR32732 Camshaft kit 12 NR26342 Lifter except block R40940, R49550 12 ER26342 Lifter 12 NR52773 Lifter for block R40940, R49550 [NR33778 cam, NR32428 oil pump gear] Uses 20 tooth tach drive R32426 (original cams used 15 tooth) Remanufactured Mushroom style VALVE TRAIN 6 00659 Valve intake 1.688 head dia, 5.700 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26109] 6 12 00658 140-1897 Valve exhaust Valve guide 1.500 head dia, 5.731 length, 0.3720 stem dia, 0.3280 tip to grv, 45 deg, 2G [OE R26108] 0.3745 ID, 0.6255 OD, 2.938 length, 11-P 12 2121111 Valve spring 2.156 free, 1.250 OD; 1.812@33, 1.375@90 24 6 NB367R AR26336 Valve lock Rotator 6 SB1750-2 Valve insert Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree, use with 1.680 valve head dia. 6 SB1562-1N Valve insert Exhaust: 1-5/16 ID, 1-9/16 OD, 7/32 depth WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog NR36846 Thermostat 180 degree, 63mm COOLING SYSTEM 1 Endurance Power Products JD341-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 4.33 359D Diesel Rod: R51727, R80034 Piston: RE19282 Tractor: 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640 European Tractor: 955, 3110, 3210, 4040, 4280 Combine: 4420, 4425, 4435 Cotton Picker/Stripper: 484, 7440, 9900, 9910, 9920 Excavator: JD54, JD55 Loader: 444D Motor Grader: 570B ENGINE KITS RP243 Overhaul kit Rod bolts in kit NR80033 for rod# R80034 RP837 Saran built engines RP237 Overhaul kit Low ring; Rod bolts in kit NR80033 for rod# R80034 InFrame kit Rod bolts in kit NR80033 for rod# R80034 RP831 InFrame kit Saran built engines RP608 Underhaul kit Rod bolts in kit NR74914 for rod# R51727 RP612 Underhaul kit Rod bolts in kit NR80033 for rod# R80034 Low ring; Rod bolts in kit NR80033 for rod# R80034 CYLINDER KIT 6 6 NRE30250 NRE19282 6 NRE24458 Saran built engines 6 NRE11509 6 NR125754 Cylinder kit Piston body High ring [NRE19282 pist, NR125754 pin, NM41029 ret, NRE66820 ring, NR116281 liner, NAR65507] Cylinder kit Low ring [NRE11509 pist, NR125754 pin, NM41029 ret, NRE66820 rings, NR116281 liner, NAR65507] Piston Piston pin Low ring 12 NM41029 Retainer piston pin 6 6 NRE66820 NR116281 Ring set Cylinder liner 6 NAR65507 Cylinder liner oring kit 6 NRE500023 NCD15466 Cylinder liner Cylinder liner shim Liner with orings [NR116281, NAR65507] .002 NRE27352 NRE27353 Bearing main pair Bearing main pair Standard .010 NRE27360 Bearing main pair .020 NRE27368 NAT21139 Bearing main pair Bearing thrust pair .030 Flanged, std NAT21132 Bearing thrust pair Flanged, .010 NAT21134 NAT21136 Bearing thrust pair Bearing thrust pair Flanged, .020 NAR81786 Bearing thrust pair NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair NAR81790 Bearing thrust pair 3 1 NR78598 NAR95932 6 NRE27348 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair NRE27364 BEARINGS 6 1 1 Flanged, .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 .010 Bearing rod pair .020 .030 6 NR55647 Bushing con rod Honable, for 1.37 pin, use with rod cast# R51727, R80034 6 1 NR55647S NT20034 Bushing con rod Bushing idler Borable, for 1.37 pin, optional useage for honable upper 1 NT26321 Bushing idler lower Does not include crank seals (Replaces NRE38858) GASKET & SEALS 1 NRE501580 Set overhaul 1 NRE38852 Set cylinder head Endurance Power Products JD359-1 (800) 467-5545 John Deere 359D Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 4.33 Rod: R51727, R80034 Piston: RE19282 1 RP343 Set oil pan Includes oil pump installation gaskets 1 RP682 Set conversion Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 1 NR114157 NR75728 Gasket cylinder head Gasket valve cover 1 NR97344 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit Includes camshaft & lifters [NR82821, NT20073] 1 NR82821 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 12 1 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Valve kit Intake 45 deg, Exhaust 45 deg; 6 retainers / 6 rotators VALVE TRAIN CYLHEAD 1 HKJD363 Saran 1 HKJD364 Dubuque 6 NR79624 6 NR89226 Valve kit Intake 45 deg, Exhaust 45 deg; 12 rotators Valve exhaust Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 NR79623 Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 6 24 RP223 NT20077 Valve insert Valve lock Intake, 45 degree 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NR41412 Retainer valve spring Saran engines used for intake and exhaust 12 NRE11410 Rotocap Dubuque engines used for intake and exhaust 6 NR87627 Valve seal Oring 12 NT20129 Valve stem cap 26 26 R53223 T20168 Bolt cylinder head Washer head bolt 1/2 x 4-1/4 [check length for proper bolts] 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 26 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] Crankshaft Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway Front CRANKSHAFT 1 NAT22562 1 NR81989 1 NH35244 1 NAR57241 Tractor: 4040 Sleeve crank seal Packing Damper vibration Front crank sleeve CONNECTING ROD 6 ERE21076 Connecting rod 6 ER55978 Connecting rod Remanufactured: Cast# R80034 Remanufactured: Cast# R51727 12 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 12 NR74194 Bolt connecting rod Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR79464 NAR62979K Oil pump Oil pump kit Oil pump with 2.000 gear, housing marked R54629 For pump with 1.625 gear, housing marked R54615 (replaces RP248) NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) Endurance Power Products JD359-1 (800) 467-5545 John Deere 359D Diesel (Continued) 1 NRE31929 Oil cooler 1 RP386 Oil cooler installation kit 6 Cylinder Bore 4.19 Stroke 4.33 Rod: R51727, R80034 Piston: RE19282 10 plate (Also order RP386 installation kit) FUEL / INJECTOR 6 NRE37503 6 ERE37503 6 NAT27622 s/n -> 410663 6 RP588 s/n 410664 -> 6 NR66090 s/n 410664 -> 1 NRE42211 1 NAH130127 Combine: 4420 Injector New, pencil type; Marked: 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087 Injector Reman, pencil type Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Fuel pump electric Includes NR97350 mounting gasket WPUMP1 WATER PUMP WPUMP2 WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD359-1 (800) 467-5545 Endurance Power Products JD359-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 4.33 359T Diesel Tractor: 3040, 3140, 3255, 3350, 3650; 4050 msn 6,593 ->; Combine: 9400 Excavator: JD65 Loader: 444D; 544E msn -> 299,000; 544ELL, 544ETC Rod: R58979, R80032, R113612 Piston: RE19278 Cotton Picker/Stripper: 7445, 7450, 7484, 9920, 9930 Loader backhoe: 710B, 710C Motor Grader: 570B ENGINE KITS RP246 Overhaul kit Rod bolts in kit NR80033 for rod# R80034; For 4050 tractor also order oil pan gasket NR97345 RP240 InFrame kit Rod bolts in kit NR80033 for rod# R80034; For 4050 tractor also order oil pan gasket NR97345 RP608 Underhaul kit Rod bolts in kit NR74914 for rod# R51727; For 4050 tractor also order oil pan gasket NR97345 RP612 Underhaul kit Rod bolts in kit NR80033 for rod# R80032, R80034; For 4050 tractor also order oil pan gasket NR97345 CYLINDER KIT 6 NRE33115 Cylinder kit 6 6 NRE19278 NR124230 Piston body Piston pin 12 NR54114 Retainer piston pin 6 6 NRE66820 NR116281 Ring set Cylinder liner 6 NAR65507 Cylinder liner oring kit 6 NRE500023 NCD15466 Cylinder liner Cylinder liner shim .002 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 .020 NRE27368 Bearing main pair .030 NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair Flanged, std Flanged, .010 NAT21134 Bearing thrust pair Flanged, .020 NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair Flanged, .030 Flangeless, std NAR81788 Bearing thrust pair Flangeless, .010 NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair Flangeless, .020 Flangeless, .030 3 NR78598 1 6 NAR95932 NRE27348 NRE27349 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 NRE27364 Bearing rod pair Bearing rod pair .020 .030 [NRE19278 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR116281 liner, NAR65507] Liner with orings [NR116281, NAR65507] BEARINGS 6 1 1 6 NR57451 Bushing con rod Honable, use w/ rod cast# R56187, R80032 6 1 NR57451S NT20034 Bushing con rod Bushing idler Borable, Optional useage for honable 1 NT26321 Bushing idler upper lower GASKET & SEALS 1 NRE501580 Set overhaul For 4050 tractor also order oil pan gasket NR97345 1 NRE38852 Set cylinder head 1 RP343 Set oil pan For 4050 tractor also order oil pan gasket NR97345 1 RP682 Set conversion 1 1 NR114157 NR75728 Does not include crank seals (Replaces NRE38858) Includes oil pump installation gaskets Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 Gasket cylinder head Gasket valve cover Endurance Power Products JD359-2 (800) 467-5545 John Deere 359T Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 4.33 Rod: R58979, R80032, R113612 Piston: RE19278 1 NR97344 All except 4050 tractor 1 NR97345 For 4050 tractor 1 NR97350 Gasket oil pan 1 1 Seal crankshaft front Seal crankshaft rear seal with sleeve Includes camshaft & lifters [NR82821, NT20073] Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 NAR67942 NRE44574 Gasket oil pan Gasket fuel pump mtg CAMSHAFT 1 1 NRE53884 NR82821 Camshaft kit Camshaft 12 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN 1 CYLHEAD HKJD366 NOTE Valve kit 1 HKJD367 Valve kit 6 6 NR79624 NR89226 Valve exhaust Valve exhaust 6 NR83071 Valve intake 6 6 NR51734 NR73064 Valve insert Valve insert 24 NT20077 Valve lock 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 6 NRE11410 NR87627 Rotocap Valve seal Oring 12 NT20129 Valve stem cap 20 R53223 esn -> 137,164 T20168 Intake 30 deg, Exhaust 45 deg; 12 rotators Intake 30 deg, Exhaust 30 deg; 12 rotators 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G .372 stem dia; 30 degree Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 R85363 Bolt cylinder head (6) used esn -> 137,164; (26) use esn 137,165 -> 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 1 NAT22562 NR81989 Crankshaft Sleeve crank seal Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway Front 1 NH35244 Packing Front crank sleeve Connecting rod New; Cast# R113612 [also works for cast# R80032] Remanufactured: Cast# R80032 CONNECTING ROD 6 NRE42733 6 ERE16494 Connecting rod 12 12 NR80033 NR74194 Bolt connecting rod Bolt connecting rod Use with rod casting# R80032, R80034 Oil pump Oil pump with 1.625 gear, housing marked R54615 Oil pump Oil pump with 2.000 gear, housing marked R54629 Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) Use with rod casting# R51727, R58979, R81410, T20007 OIL / LUBE SYSTEM 1 NRE55343 Dubuque 1 NAR79464 Saran 1 NAR62979K Dubuque NRE15940K Saran 1 NRE31929 Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) Oil cooler 10 plate (Also order RP386 installation kit) 1 Oil cooler installation kit RP386 Endurance Power Products JD359-2 (800) 467-5545 John Deere 359T Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 4.33 Rod: R58979, R80032, R113612 Piston: RE19278 FUEL / INJECTOR 6 NRE37503 6 ERE37503 6 NAT27622 s/n -> 410663 6 RP588 s/n 410664 -> 6 NR66090 s/n 410664 -> 1 NRE42211 1 NAH130127 Combine: 9400 Injector New, pencil type; Marked: 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087 Reman, pencil type Injector Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket Fuel pump electric COOLING SYSTEM WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog TURBO / AIR TURBO TURBOCHARGER New or remanufactured available, call for pricing 1 R43724 Exhaust sleeve 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 1 2 R43724G 702299C1 Exhaust sleeve Turbo seal ring 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing Endurance Power Products JD359-2 (800) 467-5545 Endurance Power Products JD359-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.250 362 / 5.9L Gas Block: R40670, R40680, R49520, R49530 Tractor: 4000, 4020 sn 201,000 -> ENGINE KITS JD-4020-G3-IF JD-4020-G3-OF InFrame kit Overhaul kit 4000, 4020 Gas sn 201, 000 -> ; SL-2546 cylinder kit 4000, 4020 Gas sn 201, 000 -> ; SL-2546 cylinder kit JD-4020-L-LP Overhaul kit 4000, 4020 LP sn 201,000 -> ; Call for price and availability CYLINDER KIT 6 AR52550 Cylinder kit 4.2500 bore, 4.840 liner barrel, 5.178 flange dia, 2 seal rings in block [2546P, SO-2546, 9805KX] 6 2546P Piston Discontinued, 4.2500 bore, 2.539 CD, 1.250 pin dia, cup; (2) 3/32, (1) 3/16 [R40795, R47863] 3 6 9805KX 9376KX Ring set Ring set 4.2500 bore; (2) 3/32, (1) 3/16 [2 cyl set] [OE AR54879] 4.2500 bore; (2) 3/32, (1) 1/4 [1 cyl set] [OE AR42612] 6 SO-2546 Cylinder liner kit 4.2500 bore; 5.178 x 0.252 flange, 4.921 pilot, 1 seal ring in block (1) SLR-2479, (1) SLR-2520 BEARINGS Upper half offset tang, Lower half center tang 3 1 NAR74814 NAR77748 Bearing main pair Bearing thrust pair Standard NAR77747 Flangeless, Standard Thrust washer set main Standard 1 3 NAR74816 Bearing main pair 1 NAR77750 Bearing thrust pair .010 Flangeless, .010 3 NAR74817 Bearing main pair 1 NAR77751 Bearing thrust pair .020 Flangeless, .020 3 1 NAR74818 NAR77752 Bearing main pair Bearing thrust pair .030 Flangeless, .030 1 NAR77753 Thrust washer set main .007 O/S 6 NAR45723 Bearing rod pair Standard 6 6 NAR46396 NAR46397 Bearing rod pair Bearing rod pair .010 .020 6 NAR46398 Bearing rod pair .030 4 NR46903 Bearing cam 6 3129YA20 Bushing con rod 1.252 ID, 1.3755 OD, 1.510 length GASKET & SEALS 1 HS3846 Set cylinder head [OE: AR53627] 1 CS3846Y Set conversion Does not include crankshaft seals 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve 1 NR49866 Gasket valve cover 2 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 1 TCS45492 Set timing cover 1 NR71918 Gasket oil pan Endurance Power Products JD362-1 (800) 467-5545 John Deere 362 / 5.9L Gas (Continued) 6 Cylinder Bore 4.250 Stroke 4.250 Block: R40670, R40680, R49520, R49530 CAMSHAFT 1 NAR100386 Camshaft kit [NR71530 cam, NR52773 lifters, NR93238 capscrew] 12 NR52773 Lifter Mushroom style VALVE TRAIN 6 01402 Valve intake 1.688 head dia, 5.914 length, 0.3720 stem dia, 0.2960 tip to grv, 45 deg, 2G 6 12 01376S 140-1898 Valve exhaust Valve guide 1.500 head dia, 5.945 length, 0.3720 stem dia, 0.2960 tip to grv, 45 deg, 1G, stellite 0.375 ID, 0.6255 OD, 3.313 length, 11-P 12 140-1898+2 Valve guide 0.3750 ID, 0.6275 OD, 3.313 length, 11-P; may be used with 5/8 reamer 12 24 NR26125 NT20077 Valve spring Valve lock 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 T20287 Rotator 6 6 SB1750-2 SB1562-1N Valve insert Valve insert Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree, use with 1.680 valve head dia. Exhaust: 1-5/16 ID, 1-9/16 OD, 7/32 depth WATER PUMP Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM 1 WPUMP1 NR36846 Endurance Power Products 180 degree, 63mm JD362-1 (800) 467-5545 John Deere 2 Cylinder Bore 6.000 Stroke 6.375 362 / 5.9L Gas Tractor: 720, 730 BEARINGS 2 2 2740CP 2740CP 10 Bearing rod pair Bearing rod pair Std; 3.7480/3.7490 shaft dia, 4.0020/4.0030 hsg bore, 1.880 length .010 2 2740CP 20 Bearing rod pair .020 2 2 09067 09195 Bearing camshaft Bearing camshaft Cone, tapered roller bearing [JD8135] Cup, tapered roller bearing [JD7438] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD362-2 (800) 467-5545 Endurance Power Products JD362-2 (800) 467-5545 John Deere 2 Cylinder Bore 6.125 Stroke 6.375 378 / 6.2L Diesel Tractor: 70, 720, 730 CYLINDER KIT 1 1 SP147STD SP147045 Rebore kit Rebore kit 6.125 bore, Std, cup head piston; Pistons, pins, retainers, rings [2 cyl set] .045; Pistons, pins, retainers, rings [2 cyl set] 1 SP147090 Rebore kit .090; Pistons, pins, retainers, rings [2 cyl set] 1 SP147125 Rebore kit .125; Pistons, pins, retainers, rings [2 cyl set] BEARINGS 2 2740CP Bearing rod pair Std; 3.7480/3.7490 shaft dia, 4.0020/4.0030 hsg bore, 1.880 length 2 2 2740CP 10 2740CP 20 Bearing rod pair Bearing rod pair .010 .020 2 09067 Bearing camshaft Cone, tapered roller bearing [JD8135] 2 09195 Bearing camshaft Cup, tapered roller bearing [JD7438] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD378-1 (800) 467-5545 Endurance Power Products JD378-1 (800) 467-5545 John Deere 2 Cylinder Bore 5.875 Stroke 7.000 380 / 6.2L Gas Tractor: 70 CYLINDER KIT 1 1 SP134STD SP134045 Rebore kit Rebore kit 5.875 bore, Std, cup head piston; Pistons, pins, retainers, rings [2 cyl set] .045; Pistons, pins, retainers, rings [2 cyl set] 1 SP134090 Rebore kit .090; Pistons, pins, retainers, rings [2 cyl set] 1 SP134125 Rebore kit .125; Pistons, pins, retainers, rings [2 cyl set] BEARINGS 2 2155SB Bearing rod pair Std; 3.3735/3.3750 shaft dia, 3.5665/3.5675 hsg bore, 2.110 length [AF1299R] 2 2 2155SB 10 2155SB 20 Bearing rod pair Bearing rod pair .010 .020 2 2155SB 30 Bearing rod pair .030 2 2 09067 09195 Bearing camshaft Bearing camshaft Cone, tapered roller bearing [JD8135] Cup, tapered roller bearing [JD7438] Set overhaul Does not include crankshaft seals GASKET & SEALS 1 FS3049 1953-55 1 HS3049 1953-55 Set cylinder head COOLING SYSTEM WPUMP1 WATER PUMP Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog JD380-1 (800) 467-5545 Endurance Power Products JD380-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404D Early Diesel Original block; esn -> 214999 Block: R26070, R33180, R34340, R40890, R40900 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 Tractor: 4010; 4020 msn -> 200,999 (check block casting) ENGINE KITS RP213 RP731 Overhaul kit Overhaul kit RP182 InFrame kit RP616 Underhaul kit Hyperformance CYLINDER KIT 6 NRE23173 Cylinder kit Standard [NRE40566 pist, NR44161 pin, NH80753 ret, NAR55630 rings, NR32050 liner, NAR40155] 6 6 NRE40566 NAR55630 Piston body Ring set Standard Standard 6 RP725 Cylinder kit Hyper [RP710 piston, NR44161 pin, NH80753 ret, NAR65502 rings, NR32050 liner, NAR40155 orings] 6 6 RP710 NAR65502 Piston body Ring set Hyperformance 6 NR44161 Piston pin 12 6 NH80753 NR32050 Retainer piston pin Cylinder liner 6 NAR40155 Cylinder liner oring kit 6 NR32050K NAR31744 Cylinder liner kit Cylinder liner shim Liner with orings [NR32050, NAR40155] .004 thick NAR39521 Cylinder liner shim .015 thick NAR31745 Cylinder liner shim .030 thick BEARINGS 6 1 NAR49243 Bearing main pair Standard NAR49245 NAR49246 Bearing main pair Bearing main pair .010 NAR49247 Bearing main pair NAR77754 NAR77756 Bearing thrust pair Bearing thrust pair NAR77757 Bearing thrust pair NAR77758 .020 .030 Flangeless, Standard Flangeless, .010 Flangeless, .020 1 NAR77747 NAR77753 6 NAR45723 Flangeless, .030 Bearing thrust pair Thrust washer set main Standard Thrust washer set main .007 O/S Standard Bearing rod pair NAR46396 NAR46397 Bearing rod pair Bearing rod pair .010 .020 NAR46398 Bearing rod pair .030 6 6 NR30939 NR30939S Bushing con rod Bushing con rod Honable Borable, Optional useage for honable 4 NR46903 Bearing cam GASKET & SEALS 1 NAR53626 Set overhaul 1 NAR53625 Set cylinder head 1 1 NAR30547 RP683 Set oil pan Set conversion 1 NR45615 Gasket cylinder head 1 1 NR49866 NR71918 Gasket valve cover Gasket oil pan 2 NR83020 2 3 NR83021 NR26297 Gasket manifold exhaust Double Gasket manifold exhaust Single 1 NR97350 Does not include crank seals Includes oil pump installation gaskets Add to pan & head sets to create complete OH set Gasket manifold intake Gasket fuel pump mtg Endurance Power Products JD404-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404D Early (Continued) Diesel Original block; esn -> 214999 1 NR26058 Gasket rear seal hsg 1 1 NR26084 NAR49025 Gasket timing cover Seal crankshaft front 1 NRE22764 Seal crankshaft rear Includes wear sleeve Includes wear sleeve Block: R26070, R33180, R34340, R40890, R40900 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 CAMSHAFT 1 1 NAR32732 NR33778 Camshaft kit Camshaft [NR33778 cam, NR32428 oil pump gear] Uses 20 tooth tach drive R32426 (original cams used 15 tooth) Camshaft, sold in kit only 1 NR32428 Oil pump drive gear Gear only, used with shaft R32427 (NLA). When shaft is worn, gear & shaft are replaced by NR45134 1 12 NR45134 NR26342 Gear oil pump drive Lifter One piece gear and shaft (can replace NR32428 gear) 12 ER26342 Lifter Remanufactured 1 NR26115 Plug cam end VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 RP480 Valve kit esn -> 82,801; 4010 tractor 1 RP480B Valve kit Cast# R26050 1 RP482 Valve kit esn 82,801 - 214,999; 4020 tsn -> 200,999 1 RP482B Valve kit Cast# R33250, R34850 6 NR26123 Valve exhaust esn -> 82,801 6 NR44175 Valve exhaust esn 82,801 - 214,999 6 NR26124 Valve intake esn -> 82,801 6 NR44174 Valve intake esn 82,801 - 214,999 6 NR43681 Valve insert except head# R26030, R26050 6 NR43680 Valve insert except head# R26030, R26050 24 NB367R Valve lock 12 12 NR28654 NR26125 Valve guide Valve spring 6 NAR26337 Rotocap 6 6 NR40223 NR87627 Retainer valve spring Valve seal Same as RP480 - without seats Same as RP482 - without seats 1.715 head dia; 6.227 length; 0.372 stem dia; 44 degree; 2G 1.902 head dia; 6.245 length; 0.372 stem dia; 44 degree; 2G Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Oring Umbrella seal 6 AR41690 Valve seal esn 82,801 -- 214,999 9/16 x 6 R42464 Bolt cylinder head (15) used esn --> 90,999; (8) used esn 91,000 - 200,999 9/16 x 5 5 R42463 Bolt cylinder head (5) used esn --> 90,999; (5) used esn 91,000 - 200,999 9/16 x 3 6 R42462 Bolt cylinder head (6) used esn --> 90,999; (6) used esn 91,000 - 200,999 9/16 x 7.12 7 R42465 Bolt cylinder head (7) used esn 91,000 - 200,999 Use with bolts: R42462, R42463, R42464, R42465 R76126 Washer head bolt CRANKSHAFT 1 AR26431 -> 200,999 Crankshaft Endurance Power Products Marked R26560; Flange: No centering ring, 4 bolt hole, 2 dowel holes JD404-1 (800) 467-5545 John Deere 404D Early (Continued) Diesel Original block; esn -> 214999 6 Cylinder Bore 4.250 Stroke 4.750 Block: R26070, R33180, R34340, R40890, R40900 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) 1 NRE53422 Crankshaft 200,999 -> (can use on early models if flywheel is cut to accommodate centering ring) 1 NAR58172 Damper vibration 4010 esn -> 82,801; 4020 esn 82,801 - 214,999 CONNECTING ROD 6 12 EAR70910 NR66452 Connecting rod Bolt connecting rod Remanufactured: Cast # R26047,R52225,R58880,R66923 OIL / LUBE SYSTEM 1 NR26151 1 AR32694 4000 & 4020 Tractors 1 NR50422 1 NR51053 Spring oil press regulato remanufactured Oil cooler 4 Oring oil cooler NR47153 Tube oil cooler Tube oil cooler FUEL / INJECTOR 6 NAR50781 Injector engine s/n 91,000 -> 285,854 6 EAR50781 Injector engine s/n 91,000 -> 285,854 6 NR60746 Injector seal New, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 Reman, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 6 NR48000 Injector seal 6 12 NR34765 NR34766 Straight leak-off boot Boot injector Clamp leak off line boot 1 NRE43273 Fuel transfer pump 4010, 4020 Tractor s/n -> 90,999 1 NRE42211 Fuel transfer pump 4010, 4020 Tractor s/n 91,000 -> Includes NR97350 mounting gasket COOLING SYSTEM 1 NAR45332 Water pump 1 NAR55617 Water pump kit Tractor: 4010, 4020 1 NAR55619 Water pump kit Tractor: 4010, 4020 1 NAR98564 Water pump kit Tractor: 4010, 4020 with air conditioning 2 NR36846 Thermostat Endurance Power Products New (NR39503, NM42830, NM27548, NR28746) mkd R26337, R34977, R34982, R41315, R44122 Use with cast# R26337, R27547, R34977, R34982 [R40979, AR62933, JD9212, R26343, R26341] Use with cast# R41315, R41318, R44122 [R40979, AR62933, JD9355, R26343, R26341] Use with cast# R34964, R34974, R41316 [R40979, AR101549, JD9257, R26343, R26341] 180 degree, 63mm JD404-1 (800) 467-5545 Endurance Power Products JD404-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404D Repl Diesel Replacement block; esn -> 214999 Block: R40930 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 Tractor: 4010; 4020 msn -> 200,999 (check block casting) ENGINE KITS RP214 RP184 Overhaul kit InFrame kit RP616 Underhaul kit CYLINDER KIT 6 NRE23170 Cylinder kit Standard [NRE40566 pist, NR44161 pin, NH80753 ret, NAR55630 rings, NR40615 liner, NAR65507] 6 6 6 NRE40566 Piston body Standard NAR55630 RP726 Ring set Cylinder kit Standard Hyper [RP711 piston, NR44161 pin, NH80753 ret, NAR65502 rings, NR40615 liner, NAR65507 orings] 6 6 12 RP711 Piston body Hyperformance NR44161 NH80753 Piston pin Retainer piston pin 6 NR40615 Cylinder liner 6 6 NAR65507 NR40615K Cylinder liner oring kit Cylinder liner kit Liner with orings [NR40615, NAR65507] NR116253 Cylinder liner shim .002 NAR49243 Bearing main pair NAR49245 Bearing main pair Standard .010 NAR49246 NAR49247 Bearing main pair Bearing main pair NAR77754 Bearing thrust pair NAR77756 NAR77757 Bearing thrust pair Bearing thrust pair NAR77758 Bearing thrust pair 1 NAR77747 NAR77753 6 NAR45723 Thrust washer set main Standard Thrust washer set main .007 O/S Standard Bearing rod pair NAR46396 Bearing rod pair .010 NAR46397 NAR46398 Bearing rod pair Bearing rod pair .020 .030 Standard BEARINGS 6 1 .020 .030 Flangeless, Standard Flangeless, .010 Flangeless, .020 Flangeless, .030 6 NR30939 Bushing con rod Honable 6 4 NR30939S NR46903 Bushing con rod Bearing cam Borable, Optional useage for honable Set overhaul Set cylinder head Does not include crank seals GASKET & SEALS 1 1 NAR53626 NAR53625 1 NAR30547 Set oil pan Includes oil pump installation gaskets 1 1 RP683 NR45615 Set conversion Gasket cylinder head Add to pan & head sets to create complete OH set 1 NR49866 Gasket valve cover 1 2 NR71918 NR83020 2 NR83021 Gasket oil pan Gasket manifold exhaust Double Gasket manifold exhaust Single 3 1 NR26297 NR97350 Gasket manifold intake Gasket fuel pump mtg 1 NR26058 Gasket rear seal hsg 1 1 NR26084 NAR49025 Gasket timing cover Seal crankshaft front 1 NRE22764 Seal crankshaft rear Endurance Power Products Includes wear sleeve Includes wear sleeve JD404-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404D Repl (Continued) Diesel Replacement block; esn -> 214999 Block: R40930 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 CAMSHAFT 1 NAR32732 Camshaft kit [NR33778 cam, NR32428 oil pump gear] Uses 20 tooth tach drive R32426 (original cams used 15 tooth) 1 1 NR33778 NR32428 Camshaft Oil pump drive gear Camshaft, sold in kit only Gear only, used with shaft R32427 (NLA). When shaft is worn, gear & shaft are replaced by NR45134 1 NR45134 Gear oil pump drive One piece gear and shaft (can replace NR32428 gear) 12 1 NR52773 NR26115 Lifter Plug cam end Mushroom style VALVE TRAIN CYLHEAD NOTE 1 RP480 Valve kit esn -> 82,801; 4010 tractor 1 RP480B Valve kit 1 RP482 Valve kit esn 82,801 - 214,999; 4020 tsn -> 200999 1 RP482B Valve kit 6 NR26123 Valve exhaust esn -> 82,801 6 NR44175 Valve exhaust esn 82,801 - 214,999 6 NR26124 Valve intake esn -> 82,801 6 NR44174 Valve intake esn 82,801 - 214,999 6 NR43681 Valve insert except head# R26050 6 NR43680 Valve insert except head# R26050 24 NB367R Valve lock 12 NR28654 Valve guide For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R26050 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 6 NAR26337 NR40223 Rotocap Retainer valve spring 12 NR87627 Valve seal Oring 12 AR41690 esn 82,801 - 214,999 1 RP365 Valve seal Umbrella seal Bolt cylinder head set (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 Marked R26560; Flange: No centering ring, 4 bolt hole, 2 dowel holes Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) Same as RP480 - without seats Cast# R33250, R34850 Same as RP482 - without seats 1.715 head dia; 6.227 length; 0.372 stem dia; 44 degree; 2G 1.902 head dia; 6.245 length; 0.372 stem dia; 44 degree; 2G Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree CRANKSHAFT 1 AR26431 Crankshaft 1 NRE53422 Crankshaft 1 NAR58172 Damper vibration 4010 esn -> 82,801; 4020 esn 82,801 - 214,999 CONNECTING ROD 6 EAR70910 Connecting rod 12 NR66452 Bolt connecting rod Remanufactured: Cast # R26047,R52225,R58880,R66923 OIL / LUBE SYSTEM 1 NR26151 Spring oil press regulato 1 AR32694 4000 & 4020 Tractors 1 NR50422 Oil cooler 1 4 Tube oil cooler Oring oil cooler NR51053 NR47153 remanufactured Tube oil cooler Endurance Power Products JD404-2 (800) 467-5545 John Deere 404D Repl (Continued) Diesel Replacement block; esn -> 214999 6 Cylinder Bore 4.250 Stroke 4.750 Block: R40930 Rod: R26047, R52225, R58880, R69923 Piston: RE23172, RE40566 FUEL / INJECTOR 6 NAR50781 Injector 6 EAR50781 Injector engine s/n 91,000 -> 285,854 (pencil type) 6 NR60746 Injector seal 6 6 NR48000 NR34765 Injector seal Boot injector 12 NR34766 Clamp leak off line boot 1 NRE43273 Fuel transfer pump 4010, 4020 - Tractor s/n -> 90,999 1 NRE42211 Fuel transfer pump 4010, 4020 - Tractor s/n 91,000 -> New, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 Reman, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 Straight leak-off boot Includes NR97350 mounting gasket COOLING SYSTEM 1 NAR45332 Water pump 1 NAR55617 Water pump kit Tractor: 4010, 4020 1 NAR55619 Water pump kit Tractor: 4010, 4020 1 NAR98564 Water pump kit Tractor: 4010, 4020 with air conditioning 2 NR36846 Thermostat Endurance Power Products New (NR39503, NM42830, NM27548, NR28746) mkd R26337, R34977, R34982, R41315, R44122 Use with cast# R26337, R27547, R34977, R34982 [R40979, AR62933, JD9212, R26343, R26341] Use with cast# R41315, R41318, R44122 [R40979, AR62933, JD9355, R26343, R26341] Use with cast# R34964, R34974, R41316 [R40979, AR101549, JD9257, R26343, R26341] 180 degree, 63mm JD404-2 (800) 467-5545 Endurance Power Products JD404-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404D Mid Diesel esn 215000 - 335845 Block: R40610,R43310,R45980,R47020,R47110,R47170,R48440 Rod: R26047, R52225, R58880, R69923 Piston: RE23168, RE40563 Tractor: 4000; 4020 msn 201,000 -> ENGINE KITS RP215 RP732 Overhaul kit Overhaul kit RP185 InFrame kit RP617 Underhaul kit Hyperformance CYLINDER KIT 6 NRE23165 Cylinder kit Standard [NRE40563 pist, NR44161 pin, NH80753 ret, NAR55630 rings, NR40615 liner, NAR65507] 6 6 NRE40563 NAR55630 Piston body Ring set Standard Standard 6 RP726 Cylinder kit Hyper [RP711 piston, NR44161 pin, NH80753 ret, NAR65502 rings, NR40615 liner, NAR65507 orings] 6 6 RP711 NAR65502 Piston body Ring set Hyperformance 6 NR44161 Piston pin 12 6 NH80753 NR40615 Retainer piston pin Cylinder liner 6 NAR65507 Cylinder liner oring kit 6 NR40615K NR116253 Cylinder liner kit Cylinder liner shim Liner with orings [NR40615, NAR65507] .002 NAR74814 NAR74816 Bearing main pair Bearing main pair Standard NAR74817 Bearing main pair NAR74818 NAR77748 Bearing main pair Bearing thrust pair NAR77750 Bearing thrust pair NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 NAR77753 Flangeless, .030 Thrust washer set main Standard Thrust washer set main .007 O/S NAR45723 NAR46396 Bearing rod pair Bearing rod pair Standard .010 NAR46397 Bearing rod pair .020 6 NAR46398 NR30939 Bearing rod pair Bushing con rod .030 Honable 6 NR30939S Bushing con rod Borable, Optional useage for honable 4 NR46903 Bearing cam Standard BEARINGS 6 1 1 6 NAR77747 .010 .020 .030 Flangeless, Standard Flangeless, .010 GASKET & SEALS 1 NAR53631 Set overhaul Does not include crank seals 1 1 NAR53630 NAR30547 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP683 Set conversion Add to pan & head sets to create complete OH set 1 1 NR48291 NR49866 Gasket cylinder head Gasket valve cover 1 NR71918 Gasket oil pan 2 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 3 NR26297 Gasket manifold intake 1 1 NR97350 NR26058 Gasket fuel pump mtg Gasket rear seal hsg 1 NR26084 Gasket timing cover Endurance Power Products JD404-3 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404D Mid (Continued) Diesel esn 215000 - 335845 Block: R40610,R43310,R45980,R47020,R47110,R47170,R48440 Rod: R26047, R52225, R58880, R69923 Piston: RE23168, RE40563 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve Camshaft kit [NR71530 cam, NR52773 lifters, NR93238 capscrew] CAMSHAFT 1 NAR100386 1 NR71530 Camshaft Camshaft, sold in kit only 12 1 NR52773 NR93238 Lifter Capscrew camshaft Mushroom style 1 NR32428 Oil pump drive gear Gear only, used with shaft R32427 (NLA). When shaft is worn, gear & shaft are replaced by NR45134 1 1 NR45134 NR26115 Gear oil pump drive Plug cam end One piece gear and shaft (can replace NR32428 gear) VALVE TRAIN CYLHEAD NOTE 1 RP484 Valve kit Tractor: 4000, 4020 tsn 201,000 -> 1 RP484B Valve kit 6 NR43679 Valve exhaust For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R40560, R46090, R53200, R58044, R59849, R64730 6 Same as RP484 - without seats 1.715 head dia; 6.133 length; 0.372 stem dia; 45 degree; 1G NR43883 Valve intake 1.902 head dia; 6.148 length; 0.372 stem dia; 44 degree; 2G 6 NR43681 6 NR43680 esn -> 245756 24 NT20077 12 NR26125 Valve insert Valve insert Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Valve lock Valve spring 6 Rotocap NRE11410 Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NR41412 Retainer valve spring can use (6) NRE11410 rotator 12 NT20129 Valve stem cap 12 NR87627 Valve seal Oring 1 RP365 Bolt cylinder head set (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 Crankshaft Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) CRANKSHAFT 1 NRE53422 1 NAR58172 Damper vibration 4000 and 4020: esn 215,000 - 335,845 CONNECTING ROD 6 12 EAR70910 NR66452 Connecting rod Bolt connecting rod Remanufactured: Cast # R26047,R52225,R58880,R66923 OIL / LUBE SYSTEM 1 NR26151 1 AR32694 4020 Tractors 1 NR50422 1 NR51053 Spring oil press regulato remanufactured Oil cooler 4 Oring oil cooler NR47153 Tube oil cooler Tube oil cooler FUEL / INJECTOR 6 NAR50781 Injector engine s/n 215,000 -> 285,854 6 EAR50781 Injector engine s/n 215,000 -> 285,854 6 NR60746 Injector seal New, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 Reman, pencil type; marked: 18421, 18646, 18660, 18767, 18768, 20494 6 NR48000 Injector seal 6 12 NR34765 NR34766 1 NRE42211 Straight leak-off boot Boot injector Clamp leak off line boot Includes NR97350 mounting gasket Fuel transfer pump Endurance Power Products JD404-3 (800) 467-5545 John Deere 404D Mid (Continued) Diesel esn 215000 - 335845 6 Cylinder Bore 4.250 Stroke 4.750 Block: R40610,R43310,R45980,R47020,R47110,R47170,R48440 Rod: R26047, R52225, R58880, R69923 Piston: RE23168, RE40563 COOLING SYSTEM 1 NAR45332 Water pump 1 NAR55617 Water pump kit Tractor: 4020 1 NAR55619 Water pump kit Tractor: 4020 1 NAR98564 Water pump kit Tractor: 4020 with air conditioning 2 NR36846 Thermostat Endurance Power Products New (NR39503, NM42830, NM27548, NR28746) mkd R26337, R34977, R34982, R41315, R44122 Use with cast# R26337, R27547, R34977, R34982 [R40979, AR62933, JD9212, R26343, R26341] Use with cast# R41315, R41318, R44122 [R40979, AR62933, JD9355, R26343, R26341] Use with cast# R34964, R34974, R41316 [R40979, AR101549, JD9257, R26343, R26341] 180 degree, 63mm JD404-3 (800) 467-5545 Endurance Power Products JD404-3 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404D Late Diesel esn 335846 -> Tractor: 4040, 4230 Combine: 6600 msn 156,502 -> ; 7700 Block: R49470, R49650, R59850, R72128 Rod: R26047, R52225, R58880, R69923 Piston: AR58770, RE23163 Loader backhoe: JD600 ENGINE KITS RP216 RP733 Overhaul kit Overhaul kit RP186 InFrame kit RP617 Underhaul kit Hyperformance CYLINDER KIT 6 NRE23160 Cylinder kit Standard [NRE41869 pist, NR44161 pin, NH80753 ret, NAR65502 rings, NR40615 liner, NAR65507] 6 6 NRE41869 RP726 Piston Cylinder kit Standard (replaces NRE23163) Hyper [RP711 piston, NR44161 pin, NH80753 ret, NAR65502 rings, NR40615 liner, NAR65507 orings] 6 RP711 Piston body Hyperformance 6 6 NAR65502 NR44161 Ring set Piston pin 12 NH80753 Retainer piston pin 6 6 NR40615 NAR65507 Cylinder liner Cylinder liner oring kit 6 NR40615K Cylinder liner kit Liner with orings [NR40615, NAR65507] NR116253 Cylinder liner shim .002 Standard BEARINGS 6 1 1 6 NAR74814 Bearing main pair Standard NAR74816 NAR74817 Bearing main pair Bearing main pair .010 NAR74818 Bearing main pair NAR77748 NAR77750 Bearing thrust pair Bearing thrust pair NAR77751 Bearing thrust pair NAR77752 NAR77747 NAR77753 Flangeless, .030 Bearing thrust pair Thrust washer set main Standard Thrust washer set main .007 O/S NAR45723 Bearing rod pair Standard NAR46396 NAR46397 Bearing rod pair Bearing rod pair .010 .020 .020 .030 Flangeless, Standard Flangeless, .010 Flangeless, .020 NAR46398 Bearing rod pair .030 6 6 NR30939 NR30939S Bushing con rod Bushing con rod Honable Borable, Optional useage for honable 4 NR46903 Bearing cam GASKET & SEALS 1 NAR63938 Set overhaul 1 NAR63940 Set cylinder head 1 1 RP344 RP684 Set oil pan Set conversion 1 NR48291 Gasket cylinder head 1 1 NR49866 NR71918 Gasket valve cover Gasket oil pan 2 NR83020 2 3 NR83021 NR26297 Gasket manifold exhaust Double Gasket manifold exhaust Single 1 NR97350 Gasket fuel pump mtg 1 1 NR26058 NR26084 Gasket rear seal hsg Gasket timing cover 1 NAR49025 Seal crankshaft front Does not include crank seals Includes oil pump installation gaskets Add to pan & head sets to create complete OH set Gasket manifold intake Endurance Power Products Includes wear sleeve JD404-4 (800) 467-5545 John Deere 404D Late Diesel esn 335846 -> (Continued) 1 NRE22764 6 Cylinder Bore 4.250 Stroke 4.750 Block: R49470, R49650, R59850, R72128 Rod: R26047, R52225, R58880, R69923 Piston: AR58770, RE23163 Seal crankshaft rear Includes wear sleeve Camshaft kit Camshaft [NR71530 cam, NR52773 lifters, NR93238 capscrew] Camshaft, sold in kit only CAMSHAFT 1 1 NAR100386 NR71530 1 NR93238 Capscrew camshaft 12 1 NR52773 NR26115 Lifter Plug cam end Mushroom style VALVE TRAIN CYLHEAD NOTE 1 RP484 Valve kit Tractor: 4230, 4040; Combine: 6600, 7700 1 RP484B Valve kit 6 NR43679 Valve exhaust For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R40560, R46090, R53200, R58044, R59849, R64730 6 NR43883 Valve intake 1.902 head dia; 6.148 length; 0.372 stem dia; 44 degree; 2G 6 24 NR43681 NT20077 Valve insert Valve lock Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 NRE11410 Rotocap 6 NR41412 Retainer valve spring can use (6) NRE11410 rotator 12 NT20129 Valve stem cap 12 NR87627 Valve seal 1 RP365 Bolt cylinder head set Same as RP484 - without seats 1.715 head dia; 6.133 length; 0.372 stem dia; 45 degree; 1G Oring (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 CRANKSHAFT 1 NRE53422 Crankshaft 1 NAR57241 Damper vibration Tractor: 4040, 4230; Combine: 6600, 7700 Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) CONNECTING ROD 6 EAR70910 Connecting rod 12 NR66452 Bolt connecting rod Remanufactured: Cast # R26047,R52225,R58880,R66923 OIL / LUBE SYSTEM 1 NR64568 Gear oil pump drive One piece gear & shaft 1 NAR55394 Oil cooler 8 plate 1 1 NR26151 NR50422 Spring oil press regulato Tube oil cooler 1 NR51053 Tube oil cooler 4 NR47153 Oring oil cooler FUEL / INJECTOR 1 RP588 s/n 576678 -> 1 NRE27786 Injector line connector ki Threaded nut type Injector leak-off line 1 NRE57264 Fuel transfer pump 4230, 6600, 7700; JD600 esn 422365 -> 1 NAH130127 Fuel pump electric Combine: 6600, 7700 use with KDEL type injector Includes NR97350 mounting gasket COOLING SYSTEM WPUMP1 1 RP136 Tractor: 4230, 4040 1 NAR98564 2 NR36846 WATER PUMP Water pump repair kit New or remanufactured available, refer to: Agricultural Water Pump Catalog Use with cast# R43114, R46561, R50408, R50409, R51683, R58713 [AR101549, JD9257, gaskets] Water pump kit Thermostat Use with cast# R34964, R34974, R41316 [R40979, AR101549, JD9257, R26343, R26341] 180 degree, 63mm Endurance Power Products JD404-4 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404T/A Early Diesel esn -> 335845 Block: R43310, R45980, R47020, R47110 Rod: R41423, R58882, R66922 Piston: AR50624 Tractor: 4320, 4520, 4620, 7020 Combine: 6602 Forage Harvester: 5200, 5400, 5440 Compactor: JD646, JD646B Excavator: JD690, JD690A Loader: JD644, JD644A ENGINE KITS RP217 Overhaul kit Does not include RP116 aftercooler gasket set RP734 Overhaul kit Hyperformance, Does not include RP116 aftercooler gasket set RP187 RP617 InFrame kit Underhaul kit Does not include RP116 aftercooler gasket set Cylinder kit Piston Std [NRE67932 piston, NR41425 pin, NR54114 ret, NAR51741 rings, NR40615 liner, NAR65507] Standard CYLINDER KIT 6 6 NRE69393 NRE67932 6 RP727 Cylinder kit Hyper [RP712 piston, NR41425 pin, NR54114 ret, NAR51741 rings, NR40615 liner, NAR65507 orings] 6 6 RP712 NAR51741 Piston Ring set Hyperformance 6 NR41425 Piston pin 12 6 NR54114 NR40615 Retainer piston pin Cylinder liner 6 NAR65507 Cylinder liner oring kit 6 NR40615K NR116253 Cylinder liner kit Cylinder liner shim Standard Liner with orings [NR40615, NAR65507] .002 BEARINGS 6 NAR74814 NAR74816 Bearing main pair Bearing main pair NAR74817 Bearing main pair NAR74818 NAR77748 Bearing main pair Bearing thrust pair NAR77750 Bearing thrust pair NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 NAR77753 Flangeless, .030 Thrust washer set main Standard Thrust washer set main .007 O/S NAR45723 NAR46396 Bearing rod pair Bearing rod pair Standard .010 NAR46397 Bearing rod pair .020 6 NAR46398 NR42173 Bearing rod pair Bushing con rod .030 Honable 6 NR42173S Bushing con rod Borable 4 NR46903 Bearing cam 1 1 6 NAR77747 Standard .010 .020 .030 Flangeless, Standard Flangeless, .010 GASKET & SEALS 1 NRG27873 Set overhaul Does not include crank seals or aftercooler gaskets, replaces NAR53094 1 1 NRG27876 RP344 Set cylinder head Set oil pan Does not include aftercooler gaskets, replaces NAR63270 Includes oil pump installation gaskets 1 RP684 Set conversion Add to pan & head sets to create complete OH set 1 1 RP116 NR48291 Set aftercooler Gasket cylinder head Single pass (hsg# R50398, R69940) 1 NR49866 Gasket valve cover 1 2 NR71918 NR83020 2 NR83021 Gasket oil pan Gasket manifold exhaust Double Gasket manifold exhaust Single 3 1 NR26297 NR97350 Gasket manifold intake Gasket fuel pump mtg 1 NR26058 Gasket rear seal hsg Endurance Power Products JD404-5 (800) 467-5545 John Deere 404T/A Early Diesel esn -> 335845 (Continued) 1 NR50353 6 Cylinder Bore 4.250 Stroke 4.750 Block: R43310, R45980, R47020, R47110 Rod: R41423, R58882, R66922 Piston: AR50624 Gasket timing cover 1 R46158 Gasket timing cover for 4520 w/ air conditioning 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 Seal crankshaft rear Includes wear sleeve Camshaft kit [NR71529 cam, NR52773 lifters, NR93238 capscrew] NRE22764 CAMSHAFT 1 NAR100385 1 NR71529 Camshaft Camshaft, sold in kit only 1 12 NR93238 NR52773 Capscrew camshaft Lifter Mushroom style 1 NR26115 Plug cam end VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R43120 1 RP485 Valve kit 4520 tractor esn -> 245546; Construction: JD644, JD644A esn -> 245546; JD690, JD690B: esn -> 249298 Same as RP485 - without seats 1 RP485B Valve kit Cast# R47320, R43920 1 RP486 Valve kit 4320; 4520 esn 245547 -> ; 4620; 7020 esn -> 335845; Forage: 5200, 5400; Construction: JD644, JD644A: esn 245547 ->; JD690, JD690B: esn 249299 >; JD646 esn -> 223644 Same as RP486 - without seats 1 RP486B Valve kit 6 NR43679 Valve exhaust 1.715 head dia; 6.133 length; 0.372 stem dia; 45 degree; 1G 6 NR43883 Valve intake esn -> 245546; use with head# R43120 6 NR43914 Valve intake esn 245547 - 335845 6 NR43681 Valve insert 1.902 head dia; 6.148 length; 0.372 stem dia; 44 degree; 2G 6 NR43680 Valve insert esn -> 245546; use with head# R43120 6 NR78702 Valve insert esn 245757 -> 24 NT20077 Valve lock 12 NR26125 Valve spring Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree 1.750 head dia; 6.128 length; 0.372 stem dia; degree; 2G Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE11410 Rotocap 12 12 NR87627 NT20129 Valve seal Valve stem cap Oring Bolt cylinder head set (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 Crankshaft Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) 1 RP365 esn 215000 -> CRANKSHAFT 1 NRE53422 1 NAR43954 Damper vibration Tractor: 4520 with air conditioning, 4620, 7020; Forage Harvester: 5200, 5440 1 NAR57241 Damper vibration Tractor: 4320; Combine: 6602 CONNECTING ROD 6 ER70912 Connecting rod 12 NR66452 Bolt connecting rod Remanufactured: Cast# R41423, R58882, R66922 OIL / LUBE SYSTEM 8 plate 1 NAR55394 Oil cooler 6-404T only 12 Plate 1 NAT25038 Oil cooler 6-404A only One piece gear & shaft 1 NR64568 Gear oil pump drive 404T: s/n 280001 -> ; not suitable for use with early 404T engines with rotary injection pumps Endurance Power Products JD404-5 (800) 467-5545 John Deere 404T/A Early Diesel esn -> 335845 (Continued) 1 NR26151 Spring oil press regulato 1 1 NR50422 NR51053 Tube oil cooler Tube oil cooler 4 NR47153 Oring oil cooler 6 Cylinder Bore 4.250 Stroke 4.750 Block: R43310, R45980, R47020, R47110 Rod: R41423, R58882, R66922 Piston: AR50624 FUEL / INJECTOR Reman, KDL (4 x 0.33) 6 EAR53091 Injector Tractor: 4320, 4620, 7020; Loader: JD644, JD644A; Excavator: JD690, 690A; 404T: s/n -> 445569 Reman, KDL (4 x 0.40) 6 EAR62986 Injector Tractor: 7020; 404A: s/n -> 445947 use with KDEL type injector 6 NRE27786 Injector leak-off line 1 NRE43272 Fuel transfer pump 4320, 4620, 7020; JD644A, JD646, JD690 1 NAR57264 Fuel transfer pump 6600, 7700 Combine COOLING SYSTEM WPUMP1 WATER PUMP 1 RP136 Water pump repair kit Tractor: 4320, 4520, 4620 1 RP137 Water pump kit 2 NAR48675 Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog Use with cast# R43114, R46561, R50408, R50409, R51683, R58713 [AR101549, JD9257, gaskets] Use with cast# R50408 [R50411 imp, AR101549 seal, JD9257 brg, R42406, R50410 gsk] 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBO / AIR 1 409250-9002 Turbocharger Tractor: 4320, 4520, 4620, 7020 1 R43724 Exhaust sleeve Remanufactured Garrett; with hose clamps for intake fitting [AR58756, AR63698, AR70987] 1 2 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing R43724G 702299C1 Exhaust sleeve Turbo seal ring Endurance Power Products 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) JD404-5 (800) 467-5545 Endurance Power Products JD404-5 (800) 467-5545 John Deere 6 Cylinder Bore 4.250 Stroke 4.750 404T/A Late Diesel esn 335846 -> Tractor: 4430, 4630 Excavator: 690B, 693B Combine: 6600 msn 156,502 -> ; 6602, 7700 Skidder: JD740 Block: R49470, R49650, R59850, R72128 Rod: R41423, R58882, R66922 Piston: AR54552 Forage Harvester: 5200, 5400, 5440; European 5420 ENGINE KITS RP218 Overhaul kit Does not include RP116 aftercooler gasket set RP735 Overhaul kit Hyperformance, Does not include RP116 aftercooler gasket set RP188 RP617 InFrame kit Underhaul kit Does not include RP116 aftercooler gasket set Cylinder kit Piston Std [NAR57804 piston, NR41425 pin, NR54114 ret, NAR51741 rings, NR40615 liner, NAR65507] Standard CYLINDER KIT 6 6 NAR63272 NAR57804 6 RP728 Cylinder kit Hyper [RP713 piston, NR41425 pin, NR54114 ret, NAR51741 rings, NR40615 liner, NAR65507 orings] 6 6 RP713 NAR51741 Piston Ring set Hyperformance 6 NR41425 Piston pin 12 6 NR54114 NR40615 Retainer piston pin Cylinder liner 6 NAR65507 Cylinder liner oring kit 6 NR40615K NR116253 Cylinder liner kit Cylinder liner shim Standard Liner with orings [NR40615, NAR65507] .002 BEARINGS 6 NAR74814 NAR74816 Bearing main pair Bearing main pair NAR74817 Bearing main pair NAR74818 NAR77748 Bearing main pair Bearing thrust pair NAR77750 Bearing thrust pair NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 NAR77753 Flangeless, .030 Thrust washer set main Standard Thrust washer set main .007 O/S NAR45723 NAR46396 Bearing rod pair Bearing rod pair Standard .010 NAR46397 Bearing rod pair .020 6 NAR46398 NR42173 Bearing rod pair Bushing con rod .030 Honable 6 NR42173S Bushing con rod Borable 4 NR46903 Bearing cam 1 1 6 NAR77747 Standard .010 .020 .030 Flangeless, Standard Flangeless, .010 GASKET & SEALS 1 NRG27875 Set overhaul Does not include crank seals or aftercooler gaskets, replaces NAR63269 1 1 NRG27876 RP344 Set cylinder head Set oil pan Does not include aftercooler gaskets, replaces NAR63270 Includes oil pump installation gaskets 1 RP684 Set conversion Add to pan & head sets to create complete OH set 1 1 RP116 NR48291 Set aftercooler Gasket cylinder head Single pass (hsg# R50398, R69940) 1 NR49866 Gasket valve cover 1 2 NR71918 NR83020 2 NR83021 Gasket oil pan Gasket manifold exhaust Double Gasket manifold exhaust Single 3 1 NR26297 NR97350 Gasket manifold intake Gasket fuel pump mtg 1 NR26058 Gasket rear seal hsg Endurance Power Products JD404-6 (800) 467-5545 John Deere 404T/A Late Diesel esn 335846 -> (Continued) 1 NR50353 6 Cylinder Bore 4.250 Stroke 4.750 Block: R49470, R49650, R59850, R72128 Rod: R41423, R58882, R66922 Piston: AR54552 Gasket timing cover 1 R46158 Gasket timing cover for 4520 w/ air conditioning 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 Seal crankshaft rear Includes wear sleeve Camshaft kit [NR71529 cam, NR52773 lifters, NR93238 capscrew] NRE22764 CAMSHAFT 1 NAR100385 1 NR71529 Camshaft Camshaft, sold in kit only 1 12 NR93238 NR52773 Capscrew camshaft Lifter Mushroom style 1 NR26115 Plug cam end VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R50360, R58673, R59876, R61521, R67906, R76315, R76384, R86427, R86696, R86700 1 RP488 Valve kit Tractor: 4430, 4630; 7020 esn 335846 -> ; Combine: 6600, 7700: with 404TH engine Same as RP488 - without seats 1 RP488B Valve kit 1.715 head dia; 6.208 length; 0.372 stem dia; 29 degree; 1G 6 NR50357 Valve exhaust 6 6 NR50358 NR50356 Valve intake Valve insert 1.715 head dia; 6.192 length; 0.372 stem dia; 29 degree; 2G 6 NR78702 Valve insert Exhaust, 1.500 ID, 1.750 OD, 7/32 depth, 45 degree Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree 24 12 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE11410 Rotocap 12 12 NR87627 NT20129 Valve seal Valve stem cap Oring Bolt cylinder head set (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 Crankshaft Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) 1 RP365 s/n 215000 -> CRANKSHAFT 1 NRE53422 1 NAR43954 Damper vibration Tractor: 4630; Forage Harvester: 5200, 5440; Skidder: JD740 1 NAR57241 Damper vibration Tractor: 4430; Combine: 6600, 6602, 7700; Excavator: 690B, 693B CONNECTING ROD 6 ER70912 Connecting rod 12 NR66452 Bolt connecting rod Remanufactured: Cast# R41423, R58882, R66922 OIL / LUBE SYSTEM 1 NR64568 404T: s/n 280001 -> 1 NR26151 1 NAT25038 6-404A only 1 NAR55394 6-404T only 1 NR50422 Gear oil pump drive One piece gear & shaft Spring oil press regulato 12 Plate Oil cooler Oil cooler 8 plate Tube oil cooler 1 NR51053 Tube oil cooler 4 NR47153 Oring oil cooler FUEL / INJECTOR Reman, KDL (4 x 0.33) 6 EAR53091 Injector Tractor: 4430; Excavator: 690B; 404T: esn -> 445569 Reman; KDEL 4 x 0.330 6 EAR74665 Injector Tractor: 4430; Excavator: 690B, 693B; Skidder: 740; esn 45570 -> Endurance Power Products JD404-6 (800) 467-5545 John Deere 404T/A Late Diesel esn 335846 -> (Continued) 6 EAR62986 Injector Tractors: 4630; 404A: s/n -> 445947 6 EAR74664 Injector Tractor: 4630 6 NRE27786 Injector leak-off line 1 NAR57264 6600, 7700 Combine 1 NAH130127 Combine: 6600, 7700 6 Cylinder Bore 4.250 Stroke 4.750 Block: R49470, R49650, R59850, R72128 Rod: R41423, R58882, R66922 Piston: AR54552 Reman, KDL (4 x 0.40) Reman; KDEL 4 x 0.345 use with KDEL type injector Fuel transfer pump Fuel pump electric COOLING SYSTEM WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog 1 RP137 Tractor: 4430, 4630 1 RP136 Tractor: 4430, 4630 1 RP140 WPUMP1 Water pump kit Use with cast# R50408 [R50411 imp, AR101549 seal, JD9257 brg, R42406, R50410 gsk] Water pump repair kit Use with cast# R43114, R46561, R50408, R50409, R51683, R58713 [AR101549, JD9257, gaskets] Water pump kit 2 Thermostat Use with cast# R54955 [R50411 imp, AR62933 seal, JD9355 brg, R42406, R50410 gsk] 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 NAR48675 TURBO / AIR 1 409250-9002 Turbocharger Tractor: 4430, 7020; Combine: 7700 1 196062R Turbocharger Tractor: 4430, 4630, 7020 1 R53514 Exhaust elbow 4430, 4630 1 R43724 Exhaust sleeve 1 R43724G Exhaust sleeve 2 702299C1 Remanufactured Garrett; with hose clamps for intake fitting [AR58756, AR63698, AR70987] Remanufactured Schwitzer; with orings for intake fitting [RE19783, AR78018, AR78022] 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing Turbo seal ring Endurance Power Products JD404-6 (800) 467-5545 Endurance Power Products JD404-6 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 5.00 414D Diesel Rod: R56187 Piston: AR68188 Loader: JD544B ENGINE KITS RP211 RP180 Overhaul kit InFrame kit RP613 Underhaul kit CYLINDER KIT 6 NRE19833 Cylinder kit 6 NAR68188 Piston body 6 12 NR124230 NR54114 Piston pin Retainer piston pin 6 NRE66820 Ring set 6 6 NR121867 NAR65507 Cylinder liner Cylinder liner oring kit 6 NRE500024 Cylinder liner Liner and orings [NR121867, NAR65507] NR65833 Cylinder liner shim .004 [NAR68188 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] BEARINGS 6 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 6 NAR97517 NAR97653 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NAR97654 Bearing rod pair .020 6 NAR97655 NR57451 Bearing rod pair Bushing con rod .030 Honable, use w/ rod cast# R56187, R80032 6 NR57451S Bushing con rod Borable, Optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 1 NRE501569 NRE38852 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE38556) 1 RP343 Set oil pan Includes oil pump installation gaskets 1 1 RP682 NR114157 Set conversion Gasket cylinder head Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 1 NR75728 Gasket valve cover 1 1 NR97344 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit Includes camshaft & lifters [NR82821, NT20073] 1 NR82821 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 Endurance Power Products JD414-1 (800) 467-5545 John Deere 414D Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: AR68188 12 NT20073 Lifter 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 6 HKJD364 NR79624 Valve kit Valve exhaust Intake 45 deg, Exhaust 45 deg; 12 rotators 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 NR89226 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G 6 6 NR79623 NR51734 Valve intake Valve insert 1.772 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 6 RP223 Valve insert Intake, 45 degree 24 12 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE11410 Rotocap 12 12 NR87627 NT20129 Valve seal Valve stem cap Oring Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 1/2 x 4-1/2, flanged head [check length for proper bolts] 20 R53223 esn -> 137,164 T20168 R85363 Bolt cylinder head (6) used esn -> 137,164; (26) used esn 137,165 -> CRANKSHAFT 1 1 1 NRE45517 Crankshaft Marked RE33687; Flange: flat, 4 bolt holes, 1 dowel; Snout: 1 keyway, 1 bolt hole, 1 gear NRE41763 Crankshaft Marked R81113, R104523; Flange:6 bolt flywheel mounting NR81989 NH35244 Sleeve crank seal Packing Front Front crank sleeve Connecting rod Bolt connecting rod Remanufactured: Cast# R56187 Use with rod casting# R54617, R56187 Oil pump Oil pump kit Oil pump with 2.000 gear, housing marked R54629 For pump with 2.000 gear, housing marked R54629 (replaces RP249) Injector Injector New, pencil type; Marked: 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087 Reman, pencil type CONNECTING ROD 6 12 EAR66400 NR74195 OIL / LUBE SYSTEM 1 1 NAR79464 NRE15940K FUEL / INJECTOR 6 6 NRE37503 ERE37503 6 NAT27622 s/n -> 505682 6 RP588 s/n 505683 -> 6 NR66090 s/n 505683 -> 1 NRE42211 Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM WPUMP1 WPUMP2 Endurance Power Products JD414-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 5.00 414T Diesel Rod: R56187 Piston: AR96389 Crawler dozer: 750, 750B, 750BLT Crawler Loader: 655, 655B, JD755, 755A, 755B, 755BH Feller buncher: 643, 643D, 693D Loader: JD544B, 544C, 544D, 544DH; 624E msn -> 299,000 Motor Grader: JD670, 670A, 670B, 672A, 672B Skidder: 640, 640D, 648D Excavator: 690D, 690DR ENGINE KITS RP212 Overhaul kit RP181 RP613 InFrame kit Underhaul kit CYLINDER KIT 6 6 NRE19832 NAR96389 Cylinder kit Piston body 6 NR124230 Piston pin 12 6 NR54114 NRE66820 Retainer piston pin Ring set 6 NR121867 Cylinder liner 6 6 NAR65507 NRE500024 Cylinder liner oring kit Cylinder liner NR65833 Cylinder liner shim [NAR96389 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] Liner and orings [NR121867, NAR65507] .004 BEARINGS 6 1 NRE27352 Bearing main pair NRE27353 Bearing main pair NRE27360 NRE27368 Bearing main pair Bearing main pair NAT21139 Bearing thrust pair NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Standard .010 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 NAT21136 Bearing thrust pair NAR81786 Bearing thrust pair Flangeless, std NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair Flangeless, .010 Flangeless, .020 NAR81790 Bearing thrust pair Flangeless, .030 3 1 NR78598 NAR95932 6 NAR97517 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NAR97653 NAR97654 Bearing rod pair Bearing rod pair .010 .020 NAR97655 Bearing rod pair .030 6 6 NR57451 NR57451S Bushing con rod Bushing con rod Honable, use w/ rod cast# R56187, R80032 Borable, Optional useage for honable 1 NT20034 Bushing idler upper 1 NT26321 Bushing idler lower Does not include crank seals (Replaces NRE38556) 1 GASKET & SEALS 1 NRE501569 Set overhaul 1 1 NRE38852 RP343 Set cylinder head Set oil pan 1 RP682 Set conversion 1 1 NR114157 NR75728 Gasket cylinder head Gasket valve cover 1 NR97344 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear Endurance Power Products Includes oil pump installation gaskets Add to pan & head sets to create OH set; For 4030 and 4050 tractor also order pan gsk NR97345 seal with sleeve JD414-2 (800) 467-5545 John Deere 414T Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: AR96389 CAMSHAFT 1 NRE53884 Camshaft kit Includes camshaft & lifters [NR82821, NT20073] 1 12 NR82821 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 1 HKJD366 HKJD367 Valve kit Valve kit Intake 30 deg, Exhaust 45 deg; 12 rotators Intake 30 deg, Exhaust 30 deg; 12 rotators 6 NR79624 Valve exhaust 1.575 head dia; 5.157 length; 0.372 stem dia; 44 degree; 2G 6 6 NR89226 NR83071 Valve exhaust Valve intake 1.575 head dia; 5.157 length; 0.372 stem dia; 30 degree; 2G .372 stem dia; 30 degree 6 NR51734 Valve insert Exhuast, 1.412 ID, 1.638 OD, .218 depth, 45 degree 6 24 NR73064 NT20077 Valve insert Valve lock Intake, 1.608 ID, 1.858 OD, .2090 depth, 30 degree 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 12 NRE11410 NR87627 Rotocap Valve seal Oring 12 NT20129 Valve stem cap VALVE TRAIN 20 R53223 esn -> 137,164 T20168 Bolt cylinder head 1/2 x 4-1/4 [check length for proper bolts] Washer head bolt 1/2 inch; Use with bolts: R53219, R53223, T20183, T23089 R85363 Bolt cylinder head (6) used esn -> 137,164; (26) used esn 137,165 -> 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 NRE45517 Crankshaft Marked RE33687; Flange: flat, 4 bolt holes, 1 dowel; Snout: 1 keyway, 1 bolt hole, 1 gear 1 1 NRE41763 NR81989 Crankshaft Sleeve crank seal Marked R81113, R104523; Flange:6 bolt flywheel mounting Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 6 EAR66400 Connecting rod Remanufactured: Cast# R56187 12 NR74195 Bolt connecting rod Use with rod casting# R54617, R56187 OIL / LUBE SYSTEM 1 NAR79464 Oil pump Oil pump with 2.000 gear, housing marked R54629 1 NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) Injector New, pencil type; Marked: 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087 Reman, pencil type FUEL / INJECTOR 6 NRE37503 6 ERE37503 6 NAT27622 s/n -> 505682 6 RP588 s/n 505683 -> 6 NR66090 s/n 505683 -> 1 NRE42211 Injector Injector line connector ki Hose barb type Injector line connector ki Threaded nut type Tube return line Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog Turbocharger Remanufactured, TO4B31 [AR88190, AR88181, AR87885, AR77168, AR72166, AR69583, AR66397] COOLING SYSTEM TURBO / AIR 1 409930-9003 esn -> 148514 Endurance Power Products JD414-2 (800) 467-5545 John Deere 414T Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: AR96389 1 466334-9010 esn 148515 -> 1 R43724 1 R43724G Turbocharger Remanufactured, Garrett TA3401 [RE26123, RE26122, RE26121, RE26120, RE26119] Exhaust sleeve Exhaust sleeve 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing 2 Turbo seal ring 702299C1 Endurance Power Products JD414-2 (800) 467-5545 Endurance Power Products JD414-2 (800) 467-5545 John Deere 2 Cylinder Bore 6.125 Stroke 7.000 414 / 6.8L Gas Tractor: G, GH, GN, GW CYLINDER KIT 1 SP128STD sn 13,000 -> 1 SP128045 sn 13,000 -> 1 SP128090 sn 13,000 -> 1 SP128125 sn 13,000 -> Rebore kit 6.1250 bore, Std, cup head piston; Pistons, pins, retainers, rings [2 cyl set] Rebore kit .045; Pistons, pins, retainers, rings [2 cyl set] Rebore kit .090; Pistons, pins, retainers, rings [2 cyl set] Rebore kit .125; Pistons, pins, retainers, rings [2 cyl set] Std; 3.3735/3.3750 shaft dia, 3.5665/3.5675 hsg bore, 2.110 length [AF1299R] .010 BEARINGS 2 2155SB Bearing rod pair 2 2155SB 10 Bearing rod pair 2 2 2155SB 20 2155SB 30 Bearing rod pair Bearing rod pair 2 09078 sn -> G34689 2 09194 sn -> G34689 2 09067 sn G34690 -> 2 09195 sn G34690 -> .020 Bearing camshaft .030 Cone, tapered roller bearing [JD7358] Bearing camshaft Cup, tapered roller bearing [JD7250] Bearing camshaft Cone, tapered roller bearing [JD8135] Bearing camshaft Cup, tapered roller bearing [JD7438] WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 Endurance Power Products JD414-3 (800) 467-5545 Endurance Power Products JD414-3 (800) 467-5545 John Deere 6 Cylinder Bore 4.560 Stroke 4.750 466D Diesel Tractor: 4050 msn -> 6,592; 4240 Combine: 6620 Mexico Tractor: 4235 Argentina Tractor: 4730, 4930 Rod: R41423, R58882, R66922 Piston: AR100442 European Combine: 6600, 7700 ENGINE KITS RP220 Overhaul kit RP189 InFrame kit RP617 Underhaul kit CYLINDER KIT 6 NAR83610 Cylinder kit Std [NAR85629 piston, NR41425 pin, NR54114 ret, NAR87753 rings, NR123969 liner, NAR98850] 6 6 NAR85629 NAR87753 Piston Ring set (replaces NAR100442) 6 NR41425 Piston pin 12 6 NR54114 NR123969 Retainer piston pin Cylinder liner 6 NAR98850 Cylinder liner oring kit 6 NR123969K NR93948 Cylinder liner Cylinder liner shim Liner with orings [NR123969, NAR98850] .002 BEARINGS 6 NAR74814 NAR74816 Bearing main pair Bearing main pair NAR74817 Bearing main pair NAR74818 NAR77748 Bearing main pair Bearing thrust pair NAR77750 Bearing thrust pair NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 NAR77753 Flangeless, .030 Thrust washer set main Standard Thrust washer set main .007 O/S NAR45723 NAR46396 Bearing rod pair Bearing rod pair Standard .010 NAR46397 Bearing rod pair .020 6 NAR46398 NR42173 Bearing rod pair Bushing con rod .030 Honable 6 NR42173S Bushing con rod Borable 4 NR46903 Bearing cam 1 1 6 NAR77747 Standard .010 .020 .030 Flangeless, Standard Flangeless, .010 GASKET & SEALS 1 NRG27872 Set overhaul Does not include crank seals, replaces NAR100638 1 1 NRG27871 RP344 Set cylinder head Set oil pan replaces NAR100632 Includes oil pump installation gaskets 1 RP684 Set conversion Add to pan & head sets to create complete OH set 1 1 NR66065 NR49866 Gasket cylinder head Gasket valve cover 1 NR71918 Gasket oil pan 2 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 3 NR50397 Gasket manifold intake 1 1 NR97350 NR26058 Gasket fuel pump mtg Gasket rear seal hsg 1 NR50353 Gasket timing cover 1 1 NAR49025 NRE22764 Seal crankshaft front Seal crankshaft rear Includes wear sleeve Camshaft kit [NR71530 cam, NR52773 lifters, NR93238 capscrew] Includes wear sleeve CAMSHAFT 1 NAR100386 Endurance Power Products JD466-1 (800) 467-5545 John Deere 466D Diesel (Continued) 1 NR71530 Camshaft 1 NR93238 Capscrew camshaft 12 1 NR52773 NR26115 Lifter Plug cam end 6 Cylinder Bore 4.560 Stroke 4.750 Rod: R41423, R58882, R66922 Piston: AR100442 Camshaft, sold in kit only Mushroom style VALVE TRAIN CYLHEAD NOTE 1 RP484 Valve kit Tractor: 4240, 4050; Combine: 6620 1 RP484B Valve kit 6 NR43679 Valve exhaust For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R40560, R46090, R53200, R58044, R59849, R64730 6 NR43883 Valve intake 1.902 head dia; 6.148 length; 0.372 stem dia; 44 degree; 2G 6 6 NR43681 NR43680 Valve insert Valve insert Exhaust, 1-1/2 ID, 1-3/4 OD, 1/4 depth, 45 degree Intake, 1-11/16 ID, 1-15/16 OD, 1/4 depth, 45 degree 24 NT20077 Valve lock 12 12 NR26125 NRE11410 Valve spring Rotocap 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NR87627 Valve seal Oring Valve stem cap Bolt cylinder head set (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 Bolt cylinder head set (11) NR88043, (8) NR88044, (7) NR88045 Crankshaft Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) 12 NT20129 1 RP365 esn -> 169336 1 RP366 esn 169337 -> Same as RP484 - without seats 1.715 head dia; 6.133 length; 0.372 stem dia; 45 degree; 1G CRANKSHAFT 1 NRE53422 1 NAR57241 Damper vibration Tractor: 4240; Combine: 6620 CONNECTING ROD 6 12 ER70912 NR66452 Connecting rod Bolt connecting rod Remanufactured: Cast# R41423, R58882, R66922 Crank driven oil pump One piece gear & shaft OIL / LUBE SYSTEM 1 1 RP1062 NR64568 Oil pump repair kit Gear oil pump drive 1 NR26151 Spring oil press regulato 1 1 NAR55394 NR50422 Oil cooler Tube oil cooler 1 NR51053 Tube oil cooler 4 NR47153 Oring oil cooler 8 plate FUEL / INJECTOR 6 EAR85541 Tractor: 4240 6 EAR74665 Tractor: 4050 1 RP588 s/n 576678 -> 6 NRE27786 Injector Reman; KDEL 4 x 0.275 Injector Reman; KDEL 4 x 0.330 Injector line connector ki Threaded nut type Injector leak-off line use with KDEL type injector 1 NAR57264 Fuel transfer pump 4050 tractor, 6620 combine 1 NAH130127 Fuel pump electric Combine: 6620 COOLING SYSTEM 1 WPUMP1 WATER PUMP RP137 Water pump kit Endurance Power Products New or remanufactured available, refer to: Agricultural Water Pump Catalog Use with cast# R50408 [R50411 imp, AR101549 seal, JD9257 brg, R42406, R50410 gsk] JD466-1 (800) 467-5545 John Deere 466D Diesel (Continued) 1 RP136 1 NRE10967 Tractor: 4240 1 NRE69846 Tractor: 4050 1 NRE69847 Tractor: 4050 2 NAR48675 6 Cylinder Bore 4.560 Stroke 4.750 Rod: R41423, R58882, R66922 Piston: AR100442 Water pump repair kit Use with cast# R43114, R46561, R50408, R50409, R51683, R58713 [AR101549, JD9257, gaskets] Water pump kit Use with cast# R61439 [R77388 imp, AR101549 seal, JD10238 brg, R42406, R61437 gsk] Water pump kit Gear driven pump, use with housing marked R71224 (replaces NRE55993) Water pump kit Gear driven pump, use with housing marked R83561 (replaces NRE55994) Thermostat 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 Endurance Power Products JD466-1 (800) 467-5545 Endurance Power Products JD466-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.560 Stroke 4.750 466T/A Early Diesel esn T -> 253372;A -> 67684 Rod: (T)R57303, (A) R67320 Piston: AR93629 Tractor: 4440 (T); 4640, 4840, 8430, 8440 (A) Combine: 6602, 6620, 7720, 7722 (T); 8820 (A) Cotton picker: 9940 (A) Forage harvester: 5720 (A) Feller buncher: JD743 (A) Loader: 644C (A), 644D(T) Tree harvester: 743A (A) Motor Grader: 770BH (T), 770AH (T,A), 770B (T,A), 772BH (A) Scraper: 762A (A) Skidder: JD740A (A) ENGINE KITS RP221P Overhaul kit Gasket set does not include aftercooler gasket set RP766 RP190P Overhaul kit InFrame kit Hyperformance, Gasket set does not include aftercooler gasket set Gasket set does not include aftercooler gasket set RP618 Underhaul kit CYLINDER KIT 6 NRE60288 Cylinder kit Std [NAR93629 piston, NR57771 pin, NE1343FN ret, NRE48380 rings, NR123969 liner, NAR98850] 6 NAR93629 Piston Standard 6 6 RP764 RP398A Cylinder kit Piston Hyper [RP398A piston, NR57771 pin, NE1343FN ret, NRE48380 ring, NR123969 liner, NAR98850 orings] Hyperformance 6 NRE48380 Ring set Lo Ring 6 12 NR57771 NE1343FN Piston pin Retainer piston pin 6 NR123969 Cylinder liner 6 6 NAR98850 NR123969K Cylinder liner oring kit Cylinder liner NR93948 Cylinder liner shim Liner with orings [NR123969, NAR98850] .002 BEARINGS 6 NAR74814 Bearing main pair NAR74816 Bearing main pair NAR74817 NAR74818 Bearing main pair Bearing main pair NAR77748 Bearing thrust pair .030 Flangeless, Standard NAR77750 Bearing thrust pair Flangeless, .010 NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 Flangeless, .030 1 NAR77747 6 NAR77753 NAR73277 Thrust washer set main Standard Thrust washer set main .007 O/S Standard Bearing rod pair NAR73279 Bearing rod pair .010 NAR73280 NAR73281 Bearing rod pair Bearing rod pair .020 .030 1 Standard .010 .020 6 NR60724 Bushing con rod Honable 6 4 NR60724S NR46903 Bushing con rod Bearing cam Borable GASKET & SEALS 1 1 NRG27877 NRG27883 Set overhaul Set cylinder head Does not include crank seals or aftercooler gasket, replaces NAR98845 Does not include aftercooler gaskets, replaces NRG22247 1 RP344 Set oil pan Includes oil pump installation gaskets 1 1 RP684 RP116 Set conversion Set aftercooler Add to pan & head sets to create complete OH set Single pass (hsg# R50398, R69940) 1 RP706 Set aftercooler Double pass (hsg# R90995, R93918, R110232) 1 1 NRE47336 NR49866 Gasket cylinder head Gasket valve cover 1 NR71918 Gasket oil pan 2 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 3 NR50397 Gasket manifold intake Endurance Power Products JD466-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.560 Stroke 4.750 466T/A Early (Continued) Diesel esn T -> 253372;A -> 67684 1 NR97350 Gasket fuel pump mtg 1 1 NR26058 NR50353 Gasket rear seal hsg Gasket timing cover 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve Rod: (T)R57303, (A) R67320 Piston: AR93629 CAMSHAFT 1 NAR100385 Camshaft kit [NR71529 cam, NR52773 lifters, NR93238 capscrew] 1 NR71529 Camshaft Camshaft, sold in kit only 1 12 NR93238 NR52773 Capscrew camshaft Lifter Mushroom style 1 NR26115 Plug cam end VALVE TRAIN For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting CYLHEAD NOTE Cast# R50360, R58673, R59876, R61521, R67906, R76315, R76384, R86427, R86696, R86700 1 RP488 Valve kit Tractor: 4440, 4640, 4840, 8430, 8440; Combine: 6620, 7720, 8820 Same as RP488 - without seats 1 RP488B Valve kit 6 NR50357 Valve exhaust 1.715 head dia; 6.208 length; 0.372 stem dia; 29 degree; 1G 6 6 NR50358 NR50356 Valve intake Valve insert 1.715 head dia; 6.192 length; 0.372 stem dia; 29 degree; 2G 6 NR78702 Valve insert Exhaust, 1.500 ID, 1.750 OD, 7/32 depth, 45 degree Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree 24 12 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE11410 Rotocap 12 12 NR87627 NT20129 Valve seal Valve stem cap Oring Bolt cylinder head set (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 Bolt cylinder head set (11) NR88043, (8) NR88044, (7) NR88045 1 RP365 esn -> 169336 1 RP366 esn 169337 -> CRANKSHAFT Marked: RE53203, R56934, R56979, R63451 (Flange: Centering ring, 6 bolt holes, 1 dowel hole) 1 NRE53422 Crankshaft Front, 23mm width, use with crank marked RE42675, RE53203 1 NR105488 Gear crankshaft 466A 1 NAR57241 Damper vibration Tractor: 4350, 4440; Combine: 6602, 6620, 7720 1 NAR102218 Damper vibration Tractor: 4640, 4840, 8440; Combine: 8820; Cotton picker: 9940; Feller: JD743; Forage harvester: 5720; Loader: 644C; Scraper: 762A; Skidder: JD740A, 734A CONNECTING ROD 6 EAR87638 Connecting rod 12 NR66452 Bolt connecting rod Remanufactured: Cast# R57303, R67320 OIL / LUBE SYSTEM 1 NR64568 466T s/n -> 253372 1 NR26151 1 NAT25038 Gear oil pump drive Spring oil press regulato 12 Plate Oil cooler 1 NR50422 Tube oil cooler 1 4 NR51053 NR47153 Tube oil cooler Oring oil cooler One piece gear & shaft FUEL / INJECTOR Reman; KDEL 4 x 0.330 6 EAR74665 Injector Tractor: 4440; Loader: 644C, 644D; Scraper: 762A; Grader: 770B; Skidder: 740A Endurance Power Products JD466-2 (800) 467-5545 John Deere 466T/A Early (Continued) Diesel esn T -> 253372;A -> 67684 6 Cylinder Bore 4.560 Stroke 4.750 Rod: (T)R57303, (A) R67320 Piston: AR93629 Reman; KDEL 4 x 0.345 6 EAR74664 Injector Tractor: 4640 Reman; KDEL 4 x 0.360 6 EAR73847 Injector Tractor: 4840, 8430, 8440 New; KDEL, 4 x 0.400 6 NAR73100 Injector Scraper: 762A 1 RP588 Injector line connector ki Threaded nut type s/n 286642 -> use with KDEL type injector 6 NRE27786 Injector leak-off line 1 NAR57264 Fuel transfer pump 4050 Tractor, 6620 Combine 1 NAH130127 Fuel pump electric Combine: 6620, 7720, 8820 COOLING SYSTEM 1 WPUMP1 RP137 WATER PUMP Water pump kit 1 RP136 Water pump repair kit 1 NRE10967 Water pump kit Tractor: 4440, 4640, 4840 2 NAR48675 Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog Use with cast# R50408 [R50411 imp, AR101549 seal, JD9257 brg, R42406, R50410 gsk] Use with cast# R43114, R46561, R50408, R50409, R51683, R58713 [AR101549, JD9257, gaskets] Use with cast# R61439 [R77388 imp, AR101549 seal, JD10238 brg, R42406, R61437 gsk] 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBO / AIR Remanufactured Schwitzer [RE19784, RE16967, AR87421, AR80312] 1 196064R Turbocharger Tractor: 4440, 4640, 4840, 8430, 8440, 8450; Combine: 6620, 7720, 8820 1 R53514 Exhaust elbow 4440, 4640, 4840 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 1 R43724 Exhaust sleeve 1 R43724G Exhaust sleeve 2 702299C1 Turbo seal ring Endurance Power Products 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing JD466-2 (800) 467-5545 Endurance Power Products JD466-2 (800) 467-5545 6 Cylinder Bore 4.560 Stroke 4.750 John Deere 466T/A Late Diesel esn T 253373 ->; A 67685 -> Rod: R71074 Piston: AR100616 Tractor: 4250, 4450 (T); 4650, 4850, 8450 (A) Combine: 6602, 6620, 6620SH, 6622, 7720, 7722 (T); 8820 (A) Cotton: 9940, 9950 (A) Forage harvester: 5720, 5730 (A) Compactor: 646C (A) Crawler Dozer: 850B (A) Loader: 644C (A); 644D (T) Scraper: 762A, 762B (A) Excavator: 690C, 690CR (T); 790, 790D, 792, 793D, 892DLC (A) Motor Grader: 770A, 770AH, 770B, 772A, 772B, 772BH ENGINE KITS RP222P Overhaul kit Gasket set does not include aftercooler gasket set RP767 RP191P Overhaul kit InFrame kit Hyperformance, Gasket set does not include aftercooler gasket set Gasket set does not include aftercooler gasket set RP618 Underhaul kit CYLINDER KIT 6 NRE60282 Cylinder kit Std [NAR98838 piston, NR57771 pin, NE1343FN ret, NRE48380 rings, NR123969 liner, NAR98850] 6 NAR98838 Piston (replaces NAR100616) 6 6 RP765 RP399A Cylinder kit Piston Hyper [RP399A piston, NR57771 pin, NE1343FN ret, NRE48380 ring, NR123969 liner, NAR98850 orings] Hyperformance 6 NRE48380 Ring set Lo Ring 6 12 NR57771 NE1343FN Piston pin Retainer piston pin 6 NR123969 Cylinder liner 6 6 NAR98850 NR123969K Cylinder liner oring kit Cylinder liner NR93948 Cylinder liner shim Liner with orings [NR123969, NAR98850] .002 BEARINGS 6 NAR74814 Bearing main pair NAR74816 Bearing main pair NAR74817 NAR74818 Bearing main pair Bearing main pair NAR77748 Bearing thrust pair .030 Flangeless, Standard NAR77750 Bearing thrust pair Flangeless, .010 NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 Flangeless, .030 1 NAR77747 6 NAR77753 NAR73277 Thrust washer set main Standard Thrust washer set main .007 O/S Standard Bearing rod pair NAR73279 Bearing rod pair .010 NAR73280 NAR73281 Bearing rod pair Bearing rod pair .020 .030 1 Standard .010 .020 6 NR74008 Bushing con rod Honable 6 4 NR74008S NR46903 Bushing con rod Bearing cam Borable GASKET & SEALS 1 1 NRG27877 NRG27883 Set overhaul Set cylinder head Does not include crank seals or aftercooler gasket, replaces NAR98845 Does not include aftercooler gaskets, replaces NRG22247 1 RP344 Set oil pan Includes oil pump installation gaskets 1 1 RP684 RP116 Set conversion Set aftercooler Add to pan & head sets to create complete OH set Single pass (hsg# R50398, R69940) 1 RP706 Set aftercooler Double pass (hsg# R90995, R93918, R110232) 1 1 NRE47336 NR49866 Gasket cylinder head Gasket valve cover 1 NR71918 Gasket oil pan 2 2 NR83020 NR83021 (sub to NAR30547 or RP344 or RP621) [NAR30547: 404D E & M] [RP344: 404D L; 404T; 466D/T/A] [RP621: 6076] Gasket manifold exhaust Double Gasket manifold exhaust Single 3 NR50397 Gasket manifold intake Endurance Power Products JD466-3 9/13/2007 (800) 467-5545 6 Cylinder Bore 4.560 Stroke 4.750 John Deere 466T/A Late (Continued) Diesel esn T 253373 ->; A 67685 -> 1 NR97350 Gasket fuel pump mtg 1 1 NR26058 NR50353 Gasket rear seal hsg Gasket timing cover 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE22764 Seal crankshaft rear Includes wear sleeve Rod: R71074 Piston: AR100616 CAMSHAFT 1 NAR100385 Camshaft kit [NR71529 cam, NR52773 lifters, NR93238 capscrew] 1 NR71529 Camshaft Camshaft, sold in kit only 1 12 NR93238 NR52773 Capscrew camshaft Lifter Mushroom style 1 NR26115 Plug cam end VALVE TRAIN For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting CYLHEAD NOTE Cast# R50360, R58673, R59876, R61521, R67906, R76315, R76384, R86427, R86696, R86700 1 RP488 Valve kit Tractor: 4250, 4450, 4650, 4850, 8450; Combine: 6620, 7720, 8820 Same as RP488 - without seats 1 RP488B Valve kit 6 NR50357 Valve exhaust 1.715 head dia; 6.208 length; 0.372 stem dia; 29 degree; 1G 6 6 NR50358 NR50356 Valve intake Valve insert 1.715 head dia; 6.192 length; 0.372 stem dia; 29 degree; 2G 6 NR78702 Valve insert Exhaust, 1.500 ID, 1.750 OD, 7/32 depth, 45 degree Intake, 1-1/2 ID, 1-3/4 OD, 7/32 depth, 45 degree 24 12 NT20077 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE11410 Rotocap 12 12 NR87627 NT20129 Valve seal Valve stem cap Oring Bolt cylinder head set (6) NR88042, (5) NR88043, (8) NR88044, (7) NR88045 Bolt cylinder head set (11) NR88043, (8) NR88044, (7) NR88045 1 RP365 esn -> 169336 1 RP366 esn 169337 -> CRANKSHAFT Marked: RE53203, R56934, R56979, R63451; Short nose: 3", helical timing gear 1 RE53422 Crankshaft Front, 23mm width, use with crank marked RE42675, RE53203 1 NR105488 Gear crankshaft 466A s/n -> 69685 1 NAR57241 Damper vibration Tractor: 4350; Combine: 6602, 6620, 6622, 7720 1 NAR102218 Damper vibration Tractor: 4650, 4850, 8450 with esn -> 259892; Combine: 8820; Compactor: 646C; Cotton picker: 9940; Feller: JD743; Forage harvester: 5720, 5730; Loader: 644C; Scraper: 762A, 762B; Skidder: JD740A, 743A 1 RE15018 Dampener Tractor: 4650, 4850, 8450: with esn 253893 -> ; Tractor: 4250, 4450; Excavator: 690C; Grader: 770A, 772A; 770B, 772B: esn -> 499999; Loader: 644D CONNECTING ROD 6 EAR93341 Connecting rod 12 NR66452 Bolt connecting rod Remanufactured: Cast# R71074 OIL / LUBE SYSTEM 1 NRE507076 Oil pump Crank driven, less gear 1 1 1 RP1062 Oil pump repair kit Crank driven oil pump NR26151 NAT25038 Spring oil press regulato 12 Plate Oil cooler 1 NR50422 Tube oil cooler 1 4 NR51053 NR47153 Tube oil cooler Oring oil cooler Endurance Power Products JD466-3 9/13/2007 (800) 467-5545 John Deere 466T/A Late (Continued) Diesel esn T 253373 ->; A 67685 -> 6 Cylinder Bore 4.560 Stroke 4.750 Rod: R71074 Piston: AR100616 FUEL / INJECTOR Reman; KDEL 4 x 0.330 6 EAR74665 Injector Tractor: 4250; Excavator: 690C; Loader: 644C, 644D; Scraper: 762A, 762B; Grader: 770B, 772B; Skidder: 740A Reman; KDEL 4 x 0.345 6 EAR74664 Injector Tractor: 4450, 4650; Excavator: 790D, 792; Crawler dozer: 850B New; KDEL, 6 x 0.285 6 NAR103189 Injector Tractor: 4850, 8450 Reman; KDEL 4 x 0.360 6 EAR73847 Injector Tractor: 8450 New; KDEL, 4 x 0.400 6 NAR73100 Injector Scraper: 762A 1 RP588 Injector line connector ki Threaded nut type s/n 286642 -> use with KDEL type injector 6 NRE27786 Injector leak-off line 1 NAR57264 Fuel transfer pump 4050 Tractor, 6620 Combine 1 NAH130127 Fuel pump electric Combine: 6620, 6622, 7720, 8820 COOLING SYSTEM WPUMP1 WATER PUMP 1 NRE69846 Water pump kit Tractor: 4250, 4450; 4650 & 4850 esn -> 309263 1 NRE69847 Water pump kit Tractor: 4250, 4450; 4650 & 4850 esn 309263 -> 2 NAR48675 Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog Gear driven pump, use with housing marked R71224 (replaces NRE55993) Gear driven pump, use with housing marked R83561 (replaces NRE55994) 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBO / AIR Remanufactured [RE19781, AR101784] 1 466608-9005 Turbocharger Tractor: 4250, 4450, 4650, 4850; Combine: 6620, 7720, 8820 1 R53514 Exhaust elbow 4250, 4450, 4650, 4850 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 1 R43724 Exhaust sleeve 1 R43724G Exhaust sleeve 2 702299C1 Turbo seal ring Endurance Power Products 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing JD466-3 9/13/2007 (800) 467-5545 Endurance Power Products JD466-3 9/13/2007 (800) 467-5545 John Deere 6 Cylinder Bore 4.750 Stroke 5.00 531D Early Diesel 5010 tractor only Tractor: 5010 Block: R35130 Rod: R35084,R40238,R53286,R58881,R66927 Piston: AR44505 Loader backhoe: JD700 early machine s/n ENGINE KITS RP336 RP332 Overhaul kit InFrame kit RP619 Underhaul kit No longer available - No cylinder kits No longer available - No cylinder kits CYLINDER KIT 6 RP328 Cylinder kit No longer available [NAR44505 piston, NR35053, ND2824R, NAR41295, NR35124 liner, NAR35992] 6 6 6 NAR44505 Piston No longer available NAR41295 NR35053 Ring set Piston pin 12 ND2824R Retainer piston pin 6 6 NR35124 NAR35992 Cylinder liner Cylinder liner oring kit BEARINGS 6 NAR101266 Bearing main pair If tang on lower half is on center, use NAR101268 NAR104568 Bearing main pair NAR104569 NAR104570 Bearing main pair Bearing main set 1 NAR101267 Bearing thrust pair If tang on lower half is on center, use NAR101269 NAR104564 Bearing thrust pair NAR104565 Bearing thrust pair NAR104566 Std (Tang: upper & lower half both offset) .010 .020 .030 Flangeless, Std (Tang: upper & lower half both offset) Flangeless, .010 Flangeless, .020 1 NAR89622 NAR89971 6 NAR53020 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize Std Bearing rod pair NAR57208 NAR57209 Bearing rod pair Bearing rod pair .010 .020 NAR57210 Bearing rod pair .030 6 6 NR36328 NR36328S Bushing con rod Bushing con rod Honable Borable 4 NR46903 Bearing cam GASKET & SEALS 1 NAR53614 Set overhaul 1 NAR53613 Set cylinder head 1 1 RP374 RP686 Set oil pan Set conversion 1 NR78513 Gasket cylinder head 1 1 NR74365 NR71919 Gasket valve cover Gasket oil pan 2 NR80969 Gasket manifold exhaust 2 3 NR80970 NR35293 Gasket manifold exhaust Gasket manifold intake 3 NR40088 Gasket manifold intake 1 1 NAR49025 NRE13310 Seal crankshaft front Seal crankshaft rear Includes wear sleeve Camshaft kit Camshaft [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] Does not include crank seals or aftercooler gasket Includes oil pump installation gaskets Add to pan & head sets to create complete OH set Includes wear sleeve CAMSHAFT 1 1 RP768 NRE11137 1 NR83569 Capscrew camshaft 12 NAR41291 Lifter Endurance Power Products Camshaft, capscrew Sold in kit only JD531-1 (800) 467-5545 John Deere 531D Early Diesel 5010 tractor only (Continued) 1 NR26115 6 Cylinder Bore 4.750 Stroke 5.00 Block: R35130 Rod: R35084,R40238,R53286,R58881,R66927 Piston: AR44505 Plug cam end VALVE TRAIN 6 CYLHEAD R35156 NOTE Valve exhaust For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 6 R35134 Valve intake 12 6 NR53192 NR41869 Valve guide Valve insert Exhaust, 1.665 ID, 1.9195 OD, .25 depth, 45 degree 6 NR41868 Valve insert Intake, 1.960 ID, 2.215 OD, .25 depth, 45 degree 24 12 NR35431 NR35157 Valve lock Valve spring Outer 12 NR40366 Valve stem cap CRANKSHAFT 1 NAR92533 Crankshaft Marked R36350,R57730,R63476,AR78403 Connecting rod Bolt connecting rod Reman, Cast# R35048,R40238,R53286,R58881,R66927 Injector Remanufactured, Pencil type WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WATER PUMP KIT Thermostat For water pump repair kit refer to water pump catalog Thermostat 192 degree CONNECTING ROD 6 12 EAR70911 NR66453 FUEL / INJECTOR 6 EAR50782 COOLING SYSTEM WPUMP1 WPUMP2 NR36846 2 or 3 used NR36847 2 or 3 used Endurance Power Products 180 degree, 63mm JD531-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.750 Stroke 5.00 531D Late Diesel Tractor: 5020, 6030 Loader backhoe: 700A late machine s/n Block: R40270, R42370, R45300, R47510 Rod: R35084,R40238,R53286,R58881,R66927 Piston: RE16549 Scraper: 760, 760A ENGINE KITS RP337 RP333 Overhaul kit InFrame kit RP619 Underhaul kit CYLINDER KIT 6 RP329 Cylinder kit 6 NRE16549 Piston 6 6 NAR41295 NR35053 Ring set Piston pin 12 ND2824R Retainer piston pin 6 6 NR42366 NAR55951 Cylinder liner Cylinder liner oring kit [NRE16459 piston, NR35053 pin, ND2824R ret, NAR41295 rings, NR42366 liner, NAR55951 orings] BEARINGS 6 NAR101266 Bearing main pair If tang on lower half is on center, use NAR101268 NAR104568 Bearing main pair NAR104569 NAR104570 Bearing main pair Bearing main set 1 NAR101267 Bearing thrust pair If tang on lower half is on center, use NAR101269 NAR104564 Bearing thrust pair NAR104565 Bearing thrust pair NAR104566 Std (Tang: upper & lower half both offset) .010 .020 .030 Flangeless, Std (Tang: upper & lower half both offset) Flangeless, .010 Flangeless, .020 1 NAR89622 NAR89971 6 NAR53020 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize Std Bearing rod pair NAR57208 NAR57209 Bearing rod pair Bearing rod pair .010 .020 NAR57210 Bearing rod pair .030 6 6 NR36328 NR36328S Bushing con rod Bushing con rod Honable Borable 4 NR46903 Bearing cam GASKET & SEALS 1 NAR53614 Set overhaul 1 NAR53613 Set cylinder head 1 1 RP374 RP686 Set oil pan Set conversion 1 NR78513 Gasket cylinder head 1 1 NR74365 NR71919 Gasket valve cover Gasket oil pan 2 NR80969 Gasket manifold exhaust 2 3 NR80970 NR35293 Gasket manifold exhaust Gasket manifold intake 3 NR40088 Gasket manifold intake 1 1 NAR49025 NRE13310 Seal crankshaft front Seal crankshaft rear Includes wear sleeve Does not include crank seals or aftercooler gasket Includes oil pump installation gaskets Add to pan & head sets to create complete OH set Includes wear sleeve CAMSHAFT 1 RP768 Camshaft kit [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] 1 1 NRE11137 NR83569 Camshaft Capscrew camshaft Camshaft, capscrew Sold in kit only 12 NAR41291 Lifter Endurance Power Products JD531-2 (800) 467-5545 John Deere 531D Late Diesel (Continued) 1 NR26115 6 Cylinder Bore 4.750 Stroke 5.00 Block: R40270, R42370, R45300, R47510 Rod: R35084,R40238,R53286,R58881,R66927 Piston: RE16549 Plug cam end VALVE TRAIN 1 CYLHEAD RP500 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast # R35140, R40100, R41867 1 RP500B Valve kit Same as RP500 - without seats 6 6 NR45823 NR42182 Valve exhaust Valve intake 1.875 head dia; 6.569 length; 0.434 stem dia; 44 degree; 1G 2.150 head dia; 6.596 length; 0.434 stem dia; 44 degree; 2G 12 NR53192 Valve guide 6 6 NR41869 NR41868 Valve insert Valve insert 24 NR35431 Valve lock 12 12 NR35157 NR40366 Valve spring Valve stem cap Outer Crankshaft Marked R36350,R57730,R63476,AR78403 Reman, Cast# R35048,R40238,R53286,R58881,R66927 Exhaust, 1.665 ID, 1.9195 OD, .25 depth, 45 degree Intake, 1.960 ID, 2.215 OD, .25 depth, 45 degree CRANKSHAFT 1 NAR92533 CONNECTING ROD 6 EAR70911 Connecting rod 12 NR66453 Bolt connecting rod FUEL / INJECTOR 6 EAR50782 5020, 6030 Injector Remanufactured, Pencil type WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 WPUMP2 NR36846 2 or 3 used NR36847 2 or 3 used WATER PUMP KIT For water pump repair kit refer to water pump catalog Thermostat 180 degree, 63mm Thermostat 192 degree Endurance Power Products JD531-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.750 Stroke 5.00 531T Diesel Compactor: JD646B Loader: JD644B Block: R48260, R72129, R80401 Rod: R48315,R53287,R58883,R66926 Piston: AR67512 Motor Grader: 770, 770A, 772A ENGINE KITS RP339 RP335 Overhaul kit InFrame kit RP619 Underhaul kit CYLINDER KIT 6 RP331 Cylinder kit 6 NAR67512 Piston 6 6 NAR53226 NR49418 Ring set Piston pin 12 NE1343FN Retainer piston pin 6 18 NR48350 NR49423 Cylinder liner Cylinder liner oring [NAR67512 piston, NR49418 pin, NE1343FN ret, NAR53226 rings, NR48350 liner, NR49423 orings] BEARINGS 6 NAR101266 Bearing main pair If tang on lower half is on center, use NAR101268 NAR104568 Bearing main pair NAR104569 NAR104570 Bearing main pair Bearing main set 1 NAR101267 Bearing thrust pair If tang on lower half is on center, use NAR101269 NAR104564 Bearing thrust pair NAR104565 Bearing thrust pair NAR104566 Std (Tang: upper & lower half both offset) .010 .020 .030 Flangeless, Std (Tang: upper & lower half both offset) Flangeless, .010 Flangeless, .020 1 NAR89622 NAR89971 6 NAR53020 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize Std Bearing rod pair NAR57208 NAR57209 Bearing rod pair Bearing rod pair .010 .020 NAR57210 Bearing rod pair .030 6 6 NR76783 NR76783S Bushing con rod Bushing con rod Honable Borable 4 NR46903 Bearing cam GASKET & SEALS 1 NRE17050 Set overhaul 1 NAR67510 Set cylinder head 1 1 RP374 RP686 Set oil pan Set conversion 1 NR78513 Gasket cylinder head 1 1 NR74365 NR71919 Gasket valve cover Gasket oil pan 2 NR80969 Gasket manifold exhaust 2 3 NR80970 NR40088 Gasket manifold exhaust Gasket manifold intake 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE13310 Seal crankshaft rear Includes wear sleeve Does not include crank seals or aftercooler gasket Includes oil pump installation gaskets Add to pan & head sets to create complete OH set CAMSHAFT 1 RP768 Camshaft kit [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] 1 NRE11137 Camshaft Camshaft, capscrew 1 12 NR83569 NAR41291 Capscrew camshaft Lifter Sold in kit only 1 NR26115 Plug cam end Endurance Power Products JD531-3 (800) 467-5545 John Deere 531T Diesel (Continued) 6 Cylinder Bore 4.750 Stroke 5.00 Block: R48260, R72129, R80401 Rod: R48315,R53287,R58883,R66926 Piston: AR67512 VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 1 RP501 RP501B Valve kit Valve kit Cast# R48720, R86702, R116836 Same as RP501 - without seats 6 NR90601 Valve exhaust 6 12 NR90602 NR53192 Valve intake Valve guide 6 NR48314 Valve insert Exhaust 6 24 NR48313 NR35431 Valve insert Valve lock Intake 12 NR49569 Valve spring Inner 12 12 NR49571 NR81086 Valve spring Rotocap Outer Intake & Exhaust 12 NR49283 Valve spring cap 12 NR40366 Valve stem cap CRANKSHAFT 1 NAR92533 Crankshaft Marked R36350,R57730,R63476,AR78403 Reman, Cast# R48315,R53287,R58883,R66926 CONNECTING ROD 6 EAR70913 Connecting rod 12 NR66453 Bolt connecting rod COOLING SYSTEM WPUMP1 NAR48675 2 or 3 used NAR72852 2 or 3 used WATER PUMP Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 Thermostat 192 degree, 54mm Turbocharger Remanufactured [AR58298, AR53174] TURBO / AIR 1 407620-9002 Tractor: 6030, 7520 Endurance Power Products JD531-3 (800) 467-5545 John Deere 6 Cylinder Bore 4.750 Stroke 5.00 531A Diesel Tractor: 6030, 7520 Block: R48260, R72129, R80401 Rod: R48315,R53287,R58883,R66926 Piston: AR53225 Forage Harvester: 5200, 5400 ENGINE KITS RP338 RP334 Overhaul kit InFrame kit RP619 Underhaul kit CYLINDER KIT 6 RP330 Cylinder kit 6 NAR53225 Piston 6 6 NAR53226 NR49418 Ring set Piston pin 12 NE1343FN Retainer piston pin 6 18 NR48350 NR49423 Cylinder liner Cylinder liner oring [NAR53225 piston, NR49418 pin, NE1343FN ret, NAR53226 rings, NR48350 liner, NR49423 orings] BEARINGS 6 NAR101266 Bearing main pair If tang on lower half is on center, use NAR101268 NAR104568 Bearing main pair NAR104569 NAR104570 Bearing main pair Bearing main set 1 NAR101267 Bearing thrust pair If tang on lower half is on center, use NAR101269 NAR104564 Bearing thrust pair NAR104565 Bearing thrust pair NAR104566 Std (Tang: upper & lower half both offset) .010 .020 .030 Flangeless, Std (Tang: upper & lower half both offset) Flangeless, .010 Flangeless, .020 1 NAR89622 NAR89971 6 NAR53020 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize Std Bearing rod pair NAR57208 NAR57209 Bearing rod pair Bearing rod pair .010 .020 NAR57210 Bearing rod pair .030 6 6 NR76783 NR76783S Bushing con rod Bushing con rod Honable Borable 4 NR46903 Bearing cam GASKET & SEALS 1 NRE17046 Set overhaul 1 NAR56154 Set cylinder head 1 1 RP374 RP686 Set oil pan Set conversion 1 NR78513 Gasket cylinder head 1 1 NR74365 NR71919 Gasket valve cover Gasket oil pan 2 NR80969 Gasket manifold exhaust 2 3 NR80970 NR40088 Gasket manifold exhaust Gasket manifold intake 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE13310 Seal crankshaft rear Includes wear sleeve Does not include crank seals or aftercooler gasket Includes oil pump installation gaskets Add to pan & head sets to create complete OH set CAMSHAFT 1 RP768 Camshaft kit [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] 1 NRE11137 Camshaft Camshaft, capscrew 1 12 NR83569 NAR41291 Capscrew camshaft Lifter Sold in kit only 1 NR26115 Plug cam end Endurance Power Products JD531-4 (800) 467-5545 John Deere 531A Diesel (Continued) 6 Cylinder Bore 4.750 Stroke 5.00 Block: R48260, R72129, R80401 Rod: R48315,R53287,R58883,R66926 Piston: AR53225 VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 1 RP501 RP501B Valve kit Valve kit Cast# R48720, R86702, R116836 Same as RP501 - without seats 6 NR90601 Valve exhaust 6 12 NR90602 NR53192 Valve intake Valve guide 6 NR48314 Valve insert Exhaust 6 24 NR48313 NR35431 Valve insert Valve lock Intake 12 NR49569 Valve spring Inner 12 12 NR49571 NR81086 Valve spring Rotocap Outer Intake & Exhaust 12 NR49283 Valve spring cap 12 NR40366 Valve stem cap CRANKSHAFT 1 NAR92533 Crankshaft Marked R36350,R57730,R63476,AR78403 Reman, Cast# R48315,R53287,R58883,R66926 CONNECTING ROD 6 EAR70913 Connecting rod 12 NR66453 Bolt connecting rod COOLING SYSTEM WPUMP1 1 RP226 Tractor: 7520, 6030 NAR48675 2 or 3 used NAR72852 2 or 3 used WATER PUMP Water pump repair kit New or remanufactured available, refer to: Agricultural Water Pump Catalog Use with cast# R48818, R58705 [RE20776 seal, AU43144 bearing, R49495, R69415 gsk] Thermostat 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 Thermostat 192 degree, 54mm TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD531-4 (800) 467-5545 John Deere 6 Cylinder Bore 5.12 Stroke 5.00 619 Early Diesel esn -> 33814 Block: R57424,R63199,R65628,R69312,R72130,R74123 Rod: R57484, R66925 Piston: AR69038 Tractor: 8630 Forage Harvester: 5460, 5820 Crawler Dozer: 850 Crawler Loader: 855 Scraper: JD762, JD860, JD860A, JD860B, 862 ENGINE KITS RP232 Overhaul kit RP229 InFrame kit RP620 Underhaul kit Does not include pin bushings CYLINDER KIT 6 NAR84089 Cylinder kit 6 6 NAR69038 NAR82355 Piston Ring set 6 NR64451 Piston pin 12 6 NN51168 NR65629 Retainer piston pin Cylinder liner 18 NAR72351 Cylinder liner oring [NAR69038 piston, NR64451 pin, NN51168 ret, NAR82355 rings, NR65629 liner, NAR72351] BEARINGS 6 NAR101268 Bearing main pair If tang on lower half is offset, use NAR101266 NAR104122 Bearing main pair NAR104123 Bearing main pair NAR104124 Bearing main pair 1 NAR101269 Bearing thrust pair If tang on lower half is offset, use NAR101267 NAR104126 Bearing thrust pair Std (Tang: upper half offset, lower half center) .010 .020 .030 Flangeless, Std (Tang: upper half offset, lower half center) Flangeless, .010 NAR104127 Bearing thrust pair NAR104128 NAR89622 NAR89971 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize NAR101271 NAR104130 Bearing rod pair Bearing rod pair Std .010 NAR104131 Bearing rod pair .020 6 NAR104132 3839Y Bearing rod pair Bushing con rod .030 1.9987 ID, 2.1872 OD, 2.0290 length 4 NR46903 Bearing cam 1 6 Flangeless, .020 GASKET & SEALS 1 NRE37416 Set overhaul 1 NRE37417 Set cylinder head 1 1 RP345 RP686 Set oil pan Set conversion 1 NRE34009 Gasket cylinder head 1 1 NR74365 NR71919 Gasket valve cover Gasket oil pan 2 NR80969 Gasket manifold exhaust 2 3 NR80970 NR40088 Gasket manifold exhaust Gasket manifold intake 1 NAR49025 Seal crankshaft front Includes wear sleeve 1 NRE13310 Seal crankshaft rear Includes wear sleeve Does not include crank seals or aftercooler gasket Includes oil pump installation gaskets Add to pan & head sets to create complete OH set CAMSHAFT 1 RP768 Camshaft kit [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] 1 1 NRE11137 NR83569 Camshaft Capscrew camshaft Camshaft, capscrew 12 NAR41291 Lifter 1 NR26115 Plug cam end Endurance Power Products Sold in kit only JD619-1 (800) 467-5545 John Deere 619 Early Diesel esn -> 33814 (Continued) 6 Cylinder Bore 5.12 Stroke 5.00 Block: R57424,R63199,R65628,R69312,R72130,R74123 Rod: R57484, R66925 Piston: AR69038 VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 1 RP502 RP502B Valve kit Valve kit Cast# R57424, R74124, R81234, R86703, R100259 Same as RP502 - without seats 6 NR63982 Valve exhaust 1.875 head dia; 6.655 length; 0.4342 stem dia; 30 degree; 1G 6 12 NR75690 NR53192 Valve intake Valve guide 2.031 head dia; 6.661 length; 0.4342 stem dia; 20 degree; 1G 6 NR60537 Valve insert Exhaust, 1.616T ID, 1.672 ID top, 1.991 OD, .309 depth, 45 degree 6 24 NR59894 NR35431 Valve insert Valve lock Intake, 1.705T ID, 1.785 ID top, 2.136 OD, .319 depth, 45 degree 12 NR49569 Valve spring Inner 12 12 NR49571 NR81086 Valve spring Rotocap Outer Intake & Exhaust 12 NR49283 Valve spring cap 12 NR40366 Valve stem cap CRANKSHAFT 1 NAR92533 Crankshaft Marked R36350,R57730,R63476,AR78403 Reman, Cast# R57484, R66925 CONNECTING ROD 6 EAR86985 Connecting rod 12 NR66453 Bolt connecting rod FUEL / INJECTOR 6 NAR73100 Injector 6 NAR103189 Injector New; KDEL, 4 x 0.400 New; KDEL, 6 x 0.285 1 NRE11929 Injector leak-off line Kit WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 1 RP226 Water pump repair kit Tractor: 8630; Scraper: JD762; Excavator: 890, 890A 1 RP227 Water pump repair kit Crawler dozer: 850, 855 sn 40599 - 40715 3 NAR48675 Thermostat 3 NAR72852 Thermostat Use with cast# R48818, R58705 [RE20776 seal, AU43144 bearing, R49495, R69415 gsk] Use with cast# R66661, R70037 [RE20767,RE20768,AR101549,JD10329,R82052,R49495,R66093] 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 192 degree, 54mm TURBO / AIR TURBO TURBOCHARGER Endurance Power Products New or remanufactured available, call for pricing JD619-1 (800) 467-5545 John Deere 6 Cylinder Bore 5.12 Stroke 5.00 619 Mid Diesel esn 33815 - 49059 Block: R57424,R63199,R65628,R69312,R72130,R74123 Rod: R63959 Piston: RE20275, RE42231 Tractor: 8630, 8640, 8650 Forage Harvester: 5460, 5820 Crawler Dozer: 850 Crawler Loader: 855 Scraper: JD762, JD860, JD860A, JD860B, 862 ENGINE KITS RP233 Overhaul kit RP230 InFrame kit RP620 Underhaul kit CYLINDER KIT 6 NRE20291 Cylinder kit [NRE42231 piston, NR64451 pin, NN51168 ret, NAR82355 rings, NR65629 liner, NAR72351] 6 6 NRE42231 NAR82355 Piston Ring set replaces NRE20275 6 NR64451 Piston pin 12 6 NN51168 NR65629 Retainer piston pin Cylinder liner 6 NAR72351 Cylinder liner oring BEARINGS 6 NAR101268 Bearing main pair If tang on lower half is offset, use NAR101266 NAR104122 Bearing main pair NAR104123 Bearing main pair NAR104124 Bearing main pair 1 NAR101269 Bearing thrust pair If tang on lower half is offset, use NAR101267 NAR104126 Bearing thrust pair Std (Tang: upper half offset, lower half center) .010 .020 .030 Flangeless, Std (Tang: upper half offset, lower half center) Flangeless, .010 NAR104127 Bearing thrust pair NAR104128 NAR89622 NAR89971 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize NAR101271 NAR104130 Bearing rod pair Bearing rod pair Std .010 NAR104131 Bearing rod pair .020 6 NAR104132 NR69045 Bearing rod pair Bushing con rod .030 Honable 6 NR69045S Bushing con rod Borable 4 NR46903 Bearing cam 1 6 Flangeless, .020 GASKET & SEALS 1 NRE37416 Set overhaul Does not include crank seals or aftercooler gasket 1 1 NRE37417 RP345 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP686 Set conversion Add to pan & head sets to create complete OH set 1 1 NRE34009 NR74365 Gasket cylinder head Gasket valve cover 1 NR71919 Gasket oil pan 2 2 NR80969 NR80970 Gasket manifold exhaust Gasket manifold exhaust 3 NR40088 Gasket manifold intake 1 1 NAR49025 NRE13310 Seal crankshaft front Seal crankshaft rear Includes wear sleeve [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] Includes wear sleeve CAMSHAFT 1 1 RP768 NRE11137 Camshaft kit Camshaft 1 NR83569 Capscrew camshaft 12 NAR41291 Lifter Endurance Power Products Camshaft, capscrew Sold in kit only JD619-2 (800) 467-5545 John Deere 619 Mid Diesel esn 33815 - 49059 (Continued) 1 NR26115 6 Cylinder Bore 5.12 Stroke 5.00 Block: R57424,R63199,R65628,R69312,R72130,R74123 Rod: R63959 Piston: RE20275, RE42231 Plug cam end VALVE TRAIN 1 CYLHEAD RP502 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R57424, R74124, R81234, R86703, R100259 1 RP502B Valve kit Same as RP502 - without seats 6 6 NR63982 NR75690 Valve exhaust Valve intake 1.875 head dia; 6.655 length; 0.4342 stem dia; 30 degree; 1G 2.031 head dia; 6.661 length; 0.4342 stem dia; 20 degree; 1G 12 NR53192 Valve guide 6 6 NR60537 NR59894 Valve insert Valve insert 24 NR35431 Valve lock 12 12 NR49569 NR49571 Valve spring Valve spring Inner Outer 12 NR81086 Rotocap Intake & Exhaust 12 12 NR49283 NR40366 Valve spring cap Valve stem cap Exhaust, 1.616T ID, 1.672 ID top, 1.991 OD, .309 depth, 45 degree Intake, 1.705T ID, 1.785 ID top, 2.136 OD, .319 depth, 45 degree CRANKSHAFT 1 NAR92533 Crankshaft Marked R36350,R57730,R63476,AR78403 Reman, Cast# R63959 CONNECTING ROD 6 EAR79366 Connecting rod 12 NR66453 Bolt connecting rod OIL / LUBE SYSTEM 1 RP1063 Oil pump repair kit Crank driven oil pump FUEL / INJECTOR 6 NAR73100 Injector 6 NAR103189 Injector New; KDEL, 4 x 0.400 New; KDEL, 6 x 0.285 1 NRE11929 Injector leak-off line Kit WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog COOLING SYSTEM WPUMP1 1 RP226 Water pump repair kit Tractor: 8630; Scraper: JD762; Excavator: 890, 890A 1 RP227 Water pump repair kit Crawler dozer: 850, 855 sn 40599 - 40715 3 NAR48675 Thermostat 3 NAR72852 Thermostat Use with cast# R48818, R58705 [RE20776 seal, AU43144 bearing, R49495, R69415 gsk] Use with cast# R66661, R70037 [RE20767,RE20768,AR101549,JD10329,R82052,R49495,R66093] 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 192 degree, 54mm TURBO / AIR TURBO TURBOCHARGER Endurance Power Products New or remanufactured available, call for pricing JD619-2 (800) 467-5545 John Deere Diesel esn 49060 -> 6 Cylinder Bore 5.12 Stroke 5.00 619 Late Block: R75934, R87552, R88217, R98554, R105739 Rod: R63959 Piston: RE20275, RE42231 Tractor: 8650 Forage Harvester: 5460, 5820, 5830 Crawler Dozer: 850 Crawler Loader: 855 Scraper: JD762, JD860, JD860A, JD860B, 862, 862B Excavator: 890, 890A, 992D, 992DLC ENGINE KITS RP234 Overhaul kit RP231 InFrame kit RP620 Underhaul kit CYLINDER KIT 6 NRE40476 Cylinder kit [NRE42231 piston, NR64451 pin, NN51168 ret, NAR82355 rings, NR77640 liner, NAR72351 orings] 6 6 NRE42231 NAR82355 Piston Ring set replaces NRE20275 6 NR64451 Piston pin 12 6 NN51168 NR77640 Retainer piston pin Cylinder liner 6 NAR72351 Cylinder liner oring BEARINGS 6 NAR101268 Bearing main pair If tang on lower half is offset, use NAR101266 NAR104122 Bearing main pair NAR104123 Bearing main pair NAR104124 Bearing main pair 1 NAR101269 Bearing thrust pair If tang on lower half is offset, use NAR101267 NAR104126 Bearing thrust pair Std (Tang: upper half offset, lower half center) .010 .020 .030 Flangeless, Std (Tang: upper half offset, lower half center) Flangeless, .010 NAR104127 Bearing thrust pair NAR104128 NAR89622 NAR89971 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize NAR101271 NAR104130 Bearing rod pair Bearing rod pair Std .010 NAR104131 Bearing rod pair .020 6 NAR104132 NR69045 Bearing rod pair Bushing con rod .030 Honable 6 NR69045S Bushing con rod Borable 4 NR46903 Bearing cam 1 6 Flangeless, .020 GASKET & SEALS 1 NRE37416 Set overhaul Does not include crank seals or aftercooler gasket 1 1 NRE37417 RP345 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 RP686 Set conversion Add to pan & head sets to create complete OH set 1 1 NRE34009 NR74365 Gasket cylinder head Gasket valve cover 1 NR71919 Gasket oil pan 2 2 NR80969 NR80970 Gasket manifold exhaust Gasket manifold exhaust 3 NR40088 Gasket manifold intake 1 1 NAR49025 NRE13310 Seal crankshaft front Seal crankshaft rear Includes wear sleeve [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] (sub to RP345) Includes wear sleeve CAMSHAFT 1 1 RP768 NRE11137 Camshaft kit Camshaft 1 NR83569 Capscrew camshaft 12 NAR41291 Lifter Endurance Power Products Camshaft, capscrew Sold in kit only JD619-3 9/13/2007 (800) 467-5545 John Deere Diesel esn 49060 -> 1 NR26115 6 Cylinder Bore 5.12 Stroke 5.00 619 Late (Continued) Block: R75934, R87552, R88217, R98554, R105739 Rod: R63959 Piston: RE20275, RE42231 Plug cam end VALVE TRAIN 1 CYLHEAD RP502 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R57424, R74124, R81234, R86703, R100259 1 6 6 RP502B Valve kit Same as RP502 - without seats NR63982 NR75690 Valve exhaust Valve intake 1.875 head dia; 6.655 length; 0.4342 stem dia; 30 degree; 1G 2.031 head dia; 6.661 length; 0.4342 stem dia; 20 degree; 1G 12 NR53192 Valve guide 6 6 NR60537 NR59894 Valve insert Valve insert 24 NR35431 Valve lock 12 12 NR49569 NR49571 Valve spring Valve spring Inner Outer 12 NR81086 Rotocap Intake & Exhaust 12 12 NR49283 NR40366 Valve spring cap Valve stem cap NLA Crankshaft Marked R36350,R57730,R63476,AR78403 Reman, Cast# R63959 Exhaust, 1.616T ID, 1.672 ID top, 1.991 OD, .309 depth, 45 degree Intake, 1.705T ID, 1.785 ID top, 2.136 OD, .319 depth, 45 degree CRANKSHAFT 1 AR92533 CONNECTING ROD 6 EAR79366 Connecting rod 12 NR66453 Bolt connecting rod OIL / LUBE SYSTEM 1 NRE507076 Oil pump Crank driven, less gear 1 RP1063 Oil pump repair kit Crank driven oil pump FUEL / INJECTOR 6 NAR73100 Injector New; KDEL, 4 x 0.400 6 NAR103189 Injector New; KDEL, 6 x 0.285 1 NRE11929 1 RP588 s/n 50292 -> Kit Injector leak-off line Injector line connector ki Threaded nut type COOLING SYSTEM WPUMP1 WATER PUMP 1 RP226 Water pump repair kit Tractor: 8630; Scraper: JD762; Excavator: 890, 890A 1 RP227 Water pump repair kit Crawler dozer: 850, 855 sn 40599 - 40715 3 NAR48675 Thermostat 3 NAR72852 Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog Use with cast# R48818, R58705 [RE20776 seal, AU43144 bearing, R49495, R69415 gsk] Use with cast# R66661, R70037 [RE20767,RE20768,AR101549,JD10329,R82052,R49495,R66093] 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 192 degree, 54mm TURBO / AIR TURBO TURBOCHARGER Endurance Power Products New or remanufactured available, call for pricing JD619-3 9/13/2007 (800) 467-5545 John Deere 3 Cylinder Bore 4.19 Stroke 4.33 3029D Diesel Rod: R80034 Piston: RE19282 Tractor: 3100 ENGINE KITS RP652 RP642 Overhaul kit InFrame kit RP610 Underhaul kit CYLINDER KIT 3 NRE30250 Cylinder kit 3 NRE19282 Piston body 3 6 NR125754 NM41029 Piston pin Retainer piston pin 3 NRE66820 Ring set 3 3 NR116281 NAR65507 Cylinder liner Cylinder liner oring kit 3 NRE500023 Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 High ring [NRE19282 pist, NR125754 pin, NM41029 ret, NRE66820 ring, NR116281 liner, NAR65507] BEARINGS 3 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 3 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 3 NRE27364 NR55647 Bearing rod pair Bushing con rod .030 Honable, for 1.37 pin, use with rod cast# R51727, R80034 3 NR55647S Bushing con rod Borable, for 1.37 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 NR119874 Bearing cam Front Does not include crank seals 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 NRE64294 Set overhaul 1 NRE38850 Set cylinder head 1 1 RP340 NR97356 Set oil pan Gasket cylinder head 1 NR75729 Gasket valve cover 1 1 NR97341 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear Includes oil pump installation gaskets seal with sleeve CAMSHAFT 1 RE55900 Camshaft kit 6 NT20073 Lifter Endurance Power Products [OEM] Camshaft with lifters JD3029-1 (800) 467-5545 John Deere 3029D Diesel (Continued) 3 Cylinder Bore 4.19 Stroke 4.33 Rod: R80034 Piston: RE19282 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD336 Valve kit 5/16" stem diameter, 6 rotators 3 3 NR90692 NR98062 Valve exhaust Valve intake 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 3 NR85687 Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 3 12 NR98063 NR91889 Valve insert Valve lock Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 6 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 6 NRE60005 NRE31617 Rotocap Valve seal Positive seal 14 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 6 ERE21076 NR80033 Connecting rod Bolt connecting rod Remanufactured: Cast# R80034 Oil pump with 1.625 gear, housing marked R54615 Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K Oil pump Oil pump kit 1 NRE61767 Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 6 plate Injector Fuel transfer pump New, pencil type; Marked: 28480, 28481 (Sub for RE36936) Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog FUEL / INJECTOR 3 1 NRE36935 NRE42211 COOLING SYSTEM WPUMP1 WPUMP2 Endurance Power Products JD3029-1 (800) 467-5545 John Deere 3 Cylinder Bore 4.19 Stroke 4.33 3029T Diesel Rod: R80032, R113612 Piston: RE19278 Skidsteer: 8875 msn -> 264,813 ENGINE KITS RP653 RP643 Overhaul kit InFrame kit RP610 Underhaul kit CYLINDER KIT 3 NRE33115 Cylinder kit 3 NRE19278 Piston body 3 6 NR124230 NR54114 Piston pin Retainer piston pin 3 NRE66820 Ring set 3 3 NR116281 NAR65507 Cylinder liner Cylinder liner oring kit 3 NRE500023 Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 [NRE19278 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR116281 liner, NAR65507] BEARINGS 3 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 3 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 3 NRE27364 NR57451 Bearing rod pair Bushing con rod .030 Honable, use w/ rod cast# R56187, R80032 3 NR57451S Bushing con rod Borable, Optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 NR119874 Bearing cam Front Does not include crank seals 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 NRE64924 Set overhaul 1 NRE38850 Set cylinder head 1 1 RP340 NR97356 Set oil pan Gasket cylinder head 1 NR75729 Gasket valve cover 1 1 NR97341 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear Includes oil pump installation gaskets seal with sleeve CAMSHAFT 1 RE55900 Camshaft kit 6 NT20073 Lifter Endurance Power Products [OEM] Camshaft with lifters JD3029-2 (800) 467-5545 John Deere 3029T Diesel (Continued) 3 Cylinder Bore 4.19 Stroke 4.33 Rod: R80032, R113612 Piston: RE19278 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD336 Valve kit 5/16" stem diameter, 6 rotators 3 3 NR90692 NR98062 Valve exhaust Valve intake 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 3 NR85687 Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 3 12 NR98063 NR91889 Valve insert Valve lock Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 6 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 6 NRE60005 NRE31617 Rotocap Valve seal Positive seal 14 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 NAT18031 Crankshaft CONNECTING ROD 3 6 NRE42733 NR80033 Connecting rod Bolt connecting rod New; Cast# R113612 [also works for cast# R80032] Oil pump with 1.625 gear, housing marked R54615 Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 1 NRE55343 NAR62979K Oil pump Oil pump kit 1 NRE61767 Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 6 plate Injector Fuel transfer pump New, pencil type; Marked: 28484, 28485 (Sub for RE38087) Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog TURBOCHARGER New or remanufactured available, call for pricing FUEL / INJECTOR 3 1 NRE36939 NRE42211 COOLING SYSTEM WPUMP1 WPUMP2 TURBO / AIR TURBO Endurance Power Products JD3029-2 (800) 467-5545 John Deere 3 Cylinder Bore 4.19 Stroke 4.33 2.9 PT Diesel Powertech Rod: R107180, R121092, R501072, R105011 Tractor Non-turbo: 5105, 5200, 5205, 5210, 5300 Tractor Turbo: 5310, 5310N, 5400, 5400N Skidsteer Non-turbo: 240, 250, 260 Skidsteer Turbo: 8875 machine sn 264,813 -> European Tractor Turbo: 5320N, 5410N CYLINDER KIT 3 NRE66271 Ring set Use with piston marked: RE61467, RE61270 3 NRE66820 Ring set Use with piston marked: RE45323, RE40557 3 NRE500023 Cylinder liner 3 3 Liner with orings [NR116281, NAR65507] NR116281 NAR65507 Cylinder liner Cylinder liner oring kit NCD15466 Cylinder liner shim .002 NR65833 Cylinder liner shim .004 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAR81786 NAR81788 Bearing thrust pair Bearing thrust pair NAR81789 Bearing thrust pair 4 NAR81790 NR78598 Bearing thrust pair Thrust washer main 3 NRE27348 Bearing rod pair NRE27349 NRE27358 Bearing rod pair Bearing rod pair NRE27364 Bearing rod pair .020 .030 NR119874 Bearing cam Front Does not include crank seals BEARINGS 3 1 1 .020 .030 Flangeless, std Flangeless, .010 Flangeless, .020 Flangeless, .030 Std, use with flangeless thrust Standard .010 GASKET & SEALS 1 NRE64294 Set overhaul 1 NRE38850 Set cylinder head 1 1 NR106796 RP340 Gasket valve cover Set oil pan Oring Includes oil pump installation gaskets 1 NAR67942 Seal crankshaft front seal with sleeve 1 NRE44574 Seal crankshaft rear CAMSHAFT 6 NT20073 Lifter VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 HKJD336 Valve kit 5/16" stem diameter, 6 rotators 3 3 NR98062 NR90692 Valve intake Valve exhaust 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 6 NR26125 Valve spring 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 6 6 NRE60005 NRE31617 Rotocap Valve seal Positive seal 12 NR91889 Valve lock 3 3 NR98063 NR85687 Valve insert Valve insert Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree CRANKSHAFT 1 NR81989 Sleeve crank seal Front 1 NH35244 Packing Front crank sleeve Bolt connecting rod Use with rod casting# R80032, R80034 CONNECTING ROD 6 NR80033 Endurance Power Products JD3029-3 (800) 467-5545 John Deere 2.9 PT Diesel Powertech (Continued) 3 Cylinder Bore 4.19 Stroke 4.33 Rod: R107180, R121092, R501072, R105011 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR62979K NRE61767 Oil pump kit Oil cooler For pump with 1.625 gear, housing marked R54615 (replaces RP248) 6 plate Injector New, pencil type; Marked: 28480, 28481 (Sub for RE36936) Injector New, pencil type; Marked: 28484, 28485 (Sub for RE38087) Injector New, pencil type; Marked 29279 WPUMP1 WATER PUMP WPUMP2 WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog NRE62658 NRE64354 Water pump kit Thermostat Use w/ housing marked R73604 TURBOCHARGER New or remanufactured available, call for pricing FUEL / INJECTOR 3 NRE36935 Natural 3 NRE36939 Turbo 3 NRE48786 Turbo COOLING SYSTEM 1 1 180 degree; Use with housing marked: R125402, T20218, R60256, R91165 TURBO / AIR TURBO Endurance Power Products JD3029-3 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 4.33 4039D Diesel Tractor: 2355, 2555CS, 3200 Sprayer: 6000 Excavator: 190E, 290D Rod: R80034 Piston: RE19278 Loader backhoe: 300D, 310C, 315D ENGINE KITS RP654 RP662 Overhaul kit InFrame kit RP611 Underhaul kit CYLINDER KIT 4 NRE30250 Cylinder kit 4 NRE19282 Piston body 4 8 NR125754 NM41029 Piston pin Retainer piston pin 4 NRE66820 Ring set 4 4 NR116281 NAR65507 Cylinder liner Cylinder liner oring kit 4 NRE500023 Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 High ring [NRE19282 pist, NR125754 pin, NM41029 ret, NRE66820 ring, NR116281 liner, NAR65507] BEARINGS 4 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 4 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 4 NRE27364 NR55647 Bearing rod pair Bushing con rod .030 Honable, for 1.37 pin, use with rod cast# R51727, R80034 4 NR55647S Bushing con rod Borable, for 1.37 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 6 NR57160 Bushing balancer shaft 6 NR91708 Bushing balancer shaft Oversize OD 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 NRE501579 Set overhaul Does not include crank seals (Replaces NRE38857) 1 1 NRE38851 RP341 Set cylinder head Set oil pan Includes oil pump installation gaskets 1 NR125863 Gasket cylinder head 1 1 NR73521 NR97342 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 1 NAR67942 NRE44574 Seal crankshaft front Seal crankshaft rear seal with sleeve Camshaft kit Includes camshaft & lifters [NR82820, NT20073] CAMSHAFT 1 RP197 Endurance Power Products JD4039-1 (800) 467-5545 John Deere 4039D Diesel (Continued) Camshaft 4 Cylinder Bore 4.19 Stroke 4.33 Rod: R80034 Piston: RE19278 1 NR82820 8 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 VALVE TRAIN 1 CYLHEAD HKJD348 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 5/16" stem diameter, 8 rotators 4 NR90692 Valve exhaust 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 4 4 NR98062 NR85687 Valve intake Valve insert 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 4 NR98063 Valve insert Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 16 8 NR91889 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 8 NRE60005 Rotocap 8 18 NRE31617 R85363 Valve seal Bolt cylinder head Positive seal 1/2 x 4-1/2, flanged head [check length for proper bolts] Marked R81959, R121018; Long nose; Snout: keyway 5/16 x 1-1/8 CRANKSHAFT 1 1 NRE20585 NR81989 Crankshaft Sleeve crank seal 1 NH35244 Packing Front Front crank sleeve CONNECTING ROD 4 ERE21076 Connecting rod 8 NR80033 Bolt connecting rod Remanufactured: Cast# R80034 Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 NRE55343 Oil pump 1 NAR79464 Oil pump Oil pump with 1.625 gear, housing marked R54615 Oil pump with 2.000 gear, housing marked R54629 1 NAR62979K Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 1 NRE15940K NRE31929 Oil pump kit Oil cooler For pump with 2.000 gear, housing marked R54629 (replaces RP249) 10 plate (Also order RP386 installation kit) 1 RP386 Oil cooler installation kit FUEL / INJECTOR 4 NRE36935 Injector New, pencil type; Marked: 28480, 28481 (Sub for RE36936) 1 NRE42211 Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD4039-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 4.33 4039T Diesel Tractor: 3400, 5500, 5500N, 6200, 6200L, 6300, 6300L, 6400, 6500 Loader backhoe: 300D, 310C, 310D, 315C, 315D Rod: R80032, R113612 Piston: RE19278 Sprayer: 6100, 6500, 6600 Windrower: 3430, 3830 ENGINE KITS RP655 Overhaul kit RP645 InFrame kit RP611 Underhaul kit CYLINDER KIT 4 NRE33115 Cylinder kit 4 4 NRE19278 NR124230 Piston body Piston pin 8 NR54114 Retainer piston pin 4 4 NRE66820 NR116281 Ring set Cylinder liner 4 NAR65507 Cylinder liner oring kit 4 NRE500023 NCD15466 Cylinder liner Cylinder liner shim [NRE19278 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR116281 liner, NAR65507] Liner with orings [NR116281, NAR65507] .002 BEARINGS 4 NRE27352 NRE27353 Bearing main pair Bearing main pair NRE27360 Bearing main pair NRE27368 NAT21139 Bearing main pair Bearing thrust pair NAT21132 Bearing thrust pair NAT21134 NAT21136 Bearing thrust pair Bearing thrust pair NAR81786 Bearing thrust pair Flanged, .030 Flangeless, std NAR81788 Bearing thrust pair Flangeless, .010 NAR81789 NAR81790 Bearing thrust pair Bearing thrust pair Flangeless, .020 Flangeless, .030 3 NR78598 Thrust washer main Std, use with flangeless thrust 1 4 NAR95932 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 NRE27364 Bearing rod pair Bearing rod pair .020 .030 4 NR57451 Bushing con rod Honable, use w/ rod cast# R56187, R80032 4 1 NR57451S NT20034 Bushing con rod Bushing idler Borable, Optional useage for honable upper 1 NT26321 Bushing idler lower 6 6 NR57160 NR91708 Bushing balancer shaft Bushing balancer shaft Oversize OD 1 1 Standard .010 .020 .030 Flanged, std Flanged, .010 Flanged, .020 GASKET & SEALS 1 NRE501579 Set overhaul 1 NRE53141 Set overhaul For 6300, 6400, 6500 Tractor only 1 NRE38851 Set cylinder head 1 NRE53123 Set cylinder head Does not include crank seals (Replaces NRE38857) 1 RP341 Set oil pan Includes oil pump installation gaskets 1 1 NR125863 NR73521 Gasket cylinder head Gasket valve cover 1 NR97342 Gasket oil pan 1 NR97350 Gasket fuel pump mtg Endurance Power Products Does not include crank seals JD4039-2 (800) 467-5545 John Deere 4039T Diesel (Continued) 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear 4 Cylinder Bore 4.19 Stroke 4.33 Rod: R80032, R113612 Piston: RE19278 seal with sleeve CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 1 NR82820 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD348 Valve kit 5/16" stem diameter, 8 rotators 4 4 NR90692 NR98062 Valve exhaust Valve intake 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 4 NR85687 Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 4 16 NR98063 NR91889 Valve insert Valve lock Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 8 8 NRE60005 NRE31617 Rotocap Valve seal 18 R85363 Bolt cylinder head Positive seal 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 NRE20585 Crankshaft 1 NR81989 Sleeve crank seal Marked R81959, R121018; Long nose; Snout: keyway 5/16 x 1-1/8 Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 4 NRE42733 Connecting rod New; Cast# R113612 [also works for cast# R80032] 4 ERE16494 Connecting rod Remanufactured: Cast# R80032 8 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR79464 NAR62979K Oil pump Oil pump kit Oil pump with 2.000 gear, housing marked R54629 For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) 1 1 NRE31929 RP386 10 plate (Also order RP386 installation kit) Oil cooler Oil cooler installation kit FUEL / INJECTOR 4 1 NRE36939 NRE42211 Injector Fuel transfer pump New, pencil type; Marked: 28484, 28485 (Sub for RE38087) Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog TURBOCHARGER New or remanufactured available, call for pricing COOLING SYSTEM WPUMP1 WPUMP2 For water pump repair kit refer to water pump catalog TURBO / AIR TURBO Endurance Power Products JD4039-2 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 4045D Diesel Tractor: 3300, 6100 Crawler dozer: 450G; 650G msn 300,000 - 742,459 Rod: R56187 Piston: RE28919 Crawler loader: 455G Loader backhoe: 410D ENGINE KITS RP658 RP648 Overhaul kit InFrame kit RP609 Underhaul kit CYLINDER KIT 4 NRE28966 Cylinder kit 4 NRE28919 Piston body 4 8 NR124230 NR54114 Piston pin Retainer piston pin 4 NRE66820 Ring set 4 4 NR121867 NAR65507 Cylinder liner Cylinder liner oring kit 4 NRE500024 Cylinder liner Liner and orings [NR121867, NAR65507] NR65833 Cylinder liner shim .004 [NRE28919 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] BEARINGS 4 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 4 NAR97517 NAR97653 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NAR97654 Bearing rod pair .020 4 NAR97655 NR57451 Bearing rod pair Bushing con rod .030 Honable, use w/ rod cast# R56187, R80032 4 NR57451S Bushing con rod Borable, Optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 6 NR57160 Bushing balancer shaft 6 1 NR91708 NR119874 Bushing balancer shaft Oversize OD Front Bearing cam 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 1 NRE501586 NRE38851 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE38599) 1 RP341 Set oil pan Includes oil pump installation gaskets 1 1 NR125863 NR73521 Gasket cylinder head Gasket valve cover 1 NR97342 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear Endurance Power Products seal with sleeve JD4045-1 (800) 467-5545 John Deere 4045D Diesel (Continued) 4 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: RE28919 CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 NR82820 NT20073 Camshaft Lifter Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 4 HKJD348 NR90692 Valve kit Valve exhaust 5/16" stem diameter, 8 rotators 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 4 NR98062 Valve intake 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 4 4 NR85687 NR98063 Valve insert Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 16 NR91889 Valve lock 8 8 NR26125 NRE60005 Valve spring Rotocap 8 NRE31617 Valve seal Positive seal 18 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] VALVE TRAIN 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils CRANKSHAFT 1 NRE54883 Crankshaft Marked R98025, R120009 1 1 NR81989 NH35244 Sleeve crank seal Packing Front Connecting rod Bolt connecting rod Remanufactured: Cast# R56187 Front crank sleeve CONNECTING ROD 4 8 EAR66400 NR74195 Use with rod casting# R54617, R56187 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 1 NAR79464 NAR62979K Oil pump Oil pump kit Oil pump with 2.000 gear, housing marked R54629 For pump with 1.625 gear, housing marked R54615 (replaces RP248) 1 NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) 1 NRE31286 Oil cooler FUEL / INJECTOR 4 NRE36939 Injector New, pencil type; Marked: 28484, 28485 (Sub for RE38087) 1 NRE42211 Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD4045-1 (800) 467-5545 John Deere 4 Cylinder Bore 4.19 Stroke 5.00 4045T Diesel Rod: R56187 Piston: RE48469 Tractor: 6400, 6400L, 6500L Crawler dozer: 450G; 550G msn 300,000 - 742,459; 550GTC; 650G msn 300,000 - 742,459 Crawler loader: 455G, 555G msn 300,000 - 742,459; 555GTC Excavator: 490E, 590D, 595D Loader: 344G, 444G Loader baackhoe: 410D, 510D Skidder: 540E msn -> 538,845; 548E msn -> 538,845 ENGINE KITS RP659 Overhaul kit RP649 RP609 InFrame kit Underhaul kit CYLINDER KIT 4 4 NRE53073 NRE48469 Cylinder kit Piston body 4 NR124230 Piston pin 8 4 NR54114 NRE66820 Retainer piston pin Ring set 4 NR121867 Cylinder liner 4 4 NAR65507 NRE500024 Cylinder liner oring kit Cylinder liner NR65833 Cylinder liner shim [NRE48469 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] Liner and orings [NR121867, NAR65507] .004 BEARINGS 4 1 NRE27352 Bearing main pair NRE27353 Bearing main pair NRE27360 NRE27368 Bearing main pair Bearing main pair NAT21139 Bearing thrust pair NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Standard .010 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 NAT21136 Bearing thrust pair NAR81786 Bearing thrust pair Flangeless, std NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair Flangeless, .010 Flangeless, .020 NAR81790 Bearing thrust pair Flangeless, .030 3 1 NR78598 NAR95932 4 NAR97517 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NAR97653 NAR97654 Bearing rod pair Bearing rod pair .010 .020 NAR97655 Bearing rod pair .030 4 4 NR57451 NR57451S Bushing con rod Bushing con rod Honable, use w/ rod cast# R56187, R80032 Borable, Optional useage for honable 1 NT20034 Bushing idler upper 1 6 NT26321 NR57160 6 NR91708 lower Bushing idler Bushing balancer shaft Bushing balancer shaft Oversize OD 1 NR119874 Bearing cam Front 1 GASKET & SEALS 1 Set overhaul Does not include crank seals (Replaces NRE37715) 1 NRE53141 For 6400 Tractor only 1 NRE38851 NRE501568 Set overhaul Does not include crank seals 1 NRE53123 For 6400 Tractor only 1 RP341 Set cylinder head 1 Gasket cylinder head NR125863 Set cylinder head Set oil pan Endurance Power Products Includes oil pump installation gaskets JD4045-2 (800) 467-5545 John Deere 4045T Diesel (Continued) 1 NR73521 Gasket valve cover 1 NR97342 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear 4 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: RE48469 seal with sleeve CAMSHAFT 1 RP197 Camshaft kit Includes camshaft & lifters [NR82820, NT20073] 1 8 1 NR82820 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 NT20073 NR81513 Lifter Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD348 Valve kit 5/16" stem diameter, 8 rotators 4 4 NR90692 NR98062 Valve exhaust Valve intake 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 4 NR85687 Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 4 16 NR98063 NR91889 Valve insert Valve lock Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 8 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 8 8 NRE60005 NRE31617 Rotocap Valve seal 18 R85363 Bolt cylinder head Positive seal 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 NRE54883 Crankshaft 1 NR81989 Sleeve crank seal Marked R98025, R120009 Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 4 EAR66400 Connecting rod Remanufactured: Cast# R56187 8 NR74195 Bolt connecting rod Use with rod casting# R54617, R56187 OIL / LUBE SYSTEM 1 NRE55343 Oil pump Oil pump with 1.625 gear, housing marked R54615 1 NAR79464 Oil pump Oil pump with 2.000 gear, housing marked R54629 1 1 NAR62979K NRE15940K Oil pump kit Oil pump kit For pump with 1.625 gear, housing marked R54615 (replaces RP248) For pump with 2.000 gear, housing marked R54629 (replaces RP249) Injector Fuel transfer pump New, pencil type; Marked: 28484, 28485 (Sub for RE38087) Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog TURBOCHARGER New or remanufactured available, call for pricing FUEL / INJECTOR 4 1 NRE36939 NRE42211 COOLING SYSTEM WPUMP1 WPUMP2 For water pump repair kit refer to water pump catalog TURBO / AIR TURBO Endurance Power Products JD4045-2 (800) 467-5545 John Deere Diesel Powertech 4 Cylinder Bore 4.19 Stroke 5.00 4.5 PT Rod: R123959, R500000, R114081, R500335 Piston: RE505101, RE505100, RE505102 Tractor: 5410, 5500, 5510, 5510N, 5715, 6010, 6110, 6110L, 6210, 6210L, 6310, 6310L, 6405, 6410, 6410L, 6510, 6510L, 6510S Dozer: 450H, 550H, 650H; 450G & 550G & 660G machine s/n 742,460 -> ; 650U, 700H Excavator: 110, 120, 120C, 160LC, 190E Loader: 324H, 344G, 344H, 444H; 555G machine s/n 742,460 -> Backhoe: 210LE, 310E/G/SE/SG, 315SE/SG, 410E/G ENGINE KITS RP810 Overhaul kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R123959 RP811 RP812 Overhaul kit Overhaul kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R500000 Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R123959 RP813 Overhaul kit Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R500000 RP814 RP815 Overhaul kit Overhaul kit Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R114081 Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R500335 RP796 InFrame kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R123959 RP797 RP798 InFrame kit InFrame kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R500000 Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R123959 RP799 InFrame kit Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R500000 RP800 RP801 InFrame kit InFrame kit Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R114081 Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R500335 RP824 Underhaul kit rod# R114081, R123959 RP825 Underhaul kit rod# R500000, R500335 CYLINDER KIT [NRE505101 piston, NR123178 pin, NM41029 ret, NRE66271 ring, NR121867 liner, NAR65507] 4 NRE505110 Cylinder kit Non-Turbo, 1.373 piston pin dia, piston# RE59279, RE505101; Rod# R123959, R500000 Non-Turbo, 1.373 pin dia 4 NRE505101 Piston [NRE505100 piston, NR123178 pin, NM41029 ret, NRE66271 rings, NR121867 liner, NAR65507] 4 NRE505111 Cylinder kit Turbo, 1.373 piston pin, piston# RE59277, RE505100; Rod# R123959, R500000 Turbo, 1.373 pin dia 4 NRE505100 Piston 4 NRE66271 Ring set use w/ piston # RE505100, RE505101 4 NR123178 Piston pin use w/ piston # RE505100, RE505101 8 NM41029 Retainer piston pin use w/ piston # RE505100, RE505101 [NRE505102 piston, NR1123177 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] 4 NRE505112 Cylinder kit Turbo, 1.623 piston pin, piston# RE55512, RE505102; Rod# R114081, R500335 Turbo, 1.623 pin dia 4 NRE505102 Piston 4 NRE66820 use w/ piston # RE505102 4 NR123177 use w/ piston # RE505102 8 NR54114 use w/ piston # RE505102 4 NRE500024 4 NR121867 Cylinder liner Cylinder liner 4 Cylinder liner oring kit NAR65507 Ring set Piston pin Retainer piston pin Liner and orings [NR121867, NAR65507] BEARINGS 4 1 4 NRE65165 Bearing main pair Std NRE65911 Bearing main pair .254mm undersize NRE65168 NRE65912 Bearing thrust pair Bearing thrust pair Std .254mm undersize NRE61253 Thrust washer set main NRE65908 NRE65909 Bearing rod pair Bearing rod pair Endurance Power Products Std .254mm undersize JD4045-3 9/13/2007 (800) 467-5545 John Deere Diesel Powertech 4 Cylinder Bore 4.19 Stroke 5.00 4.5 PT (Continued) 4 NR123960 DF150, TF150, TF250 4 NR114082 TF250, HF250 1 NR119874 6 1 Bushing balancer shaft upper Bushing idler NR115299 NR114193 Rod: R123959, R500000, R114081, R500335 Piston: RE505101, RE505100, RE505102 Bushing con rod 1.373 ID; use w/ rod# R500000, R123959 Bushing con rod 1.623 ID; use w/ rod# R500335, R114081 Bearing cam Front GASKET & SEALS 1 1 NRE501455 NRE66084 Set overhaul Set inframe 1 NRE66082 Set cylinder head 1 RP793 Set oil pan 1 R123352 Gasket oil pan Code: 1901, 1902, 1903, 1936 1 R123353 Gasket oil pan Code: 1904, 1923 1 NRE59810 Seal crankshaft front 1 NRE44574 Does not include crank seals Includes oil pump installation gaskets Seal crankshaft rear CAMSHAFT 8 NR123565 Lifter 1 1 NRE500448 NRE500449 Balancer shaft Balancer shaft Right hand; Shaft, keys, gear CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 4 HKJD348 NR98062 Valve kit Valve intake 5/16" stem diameter, 8 rotators 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 4 NR90692 Valve exhaust 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 8 8 NR26125 NRE60005 Valve spring Rotocap 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils Left hand; Shaft, keys, gear VALVE TRAIN 8 NRE31617 Valve seal Positive seal 16 4 NR91889 NR98063 Valve lock Valve insert Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 4 NR85687 Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree CRANKSHAFT 1 RE50618 Crankshaft Forged, cast# R113596 1 Early 1 Mid 1 1 NRE50618 Crankshaft 4 bolt snout, woodfuff key (Cast crankshaft) NRE506195 Crankshaft Taper nose, bolt in center (Cast crankshaft) NR81989 NH35244 Sleeve crank seal Packing Front Front crank sleeve CONNECTING ROD 8 NR114083 Bolt connecting rod use w/ rod# R114081, R123959; 64mm length (2.94 inch, 75mm OAL) 8 NR501124 Bolt connecting rod use w/ rod# R500000, R500335; 61mm length (2.75 inch, 70mm OAL) Oil pump 1-5/8 gears Injector New, pencil type; Marked 32262 Injector New, pencil type; Marked 29279 OIL / LUBE SYSTEM 1 NRE504914 FUEL / INJECTOR 4 NRE60062 non-turbo 4 NRE48786 Turbo Endurance Power Products JD4045-3 9/13/2007 (800) 467-5545 John Deere Diesel Powertech 4.5 PT (Continued) 4 Cylinder Bore 4.19 Stroke 5.00 Rod: R123959, R500000, R114081, R500335 Piston: RE505101, RE505100, RE505102 COOLING SYSTEM 1 WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog 1 1 NRE505980 NRE33705 Water pump Thermostat 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 1 NAR48675 Thermostat 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD4045-3 9/13/2007 (800) 467-5545 Endurance Power Products JD4045-3 9/13/2007 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 4.33 6059D Diesel Loader backhoe: 710D Rod: R80034 Piston: RE19282 Skidder: 540E & 548E msn 538, 846 -> ; 540G & 548G msn -> 701,059 ENGINE KITS RP656 RP646 Overhaul kit InFrame kit RP612 Underhaul kit CYLINDER KIT 6 NRE30250 Cylinder kit 6 NRE19282 Piston body 6 12 NR125754 NM41029 Piston pin Retainer piston pin 6 NRE66820 Ring set 6 6 NR116281 NAR65507 Cylinder liner Cylinder liner oring kit 6 NRE500023 Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 High ring [NRE19282 pist, NR125754 pin, NM41029 ret, NRE66820 ring, NR116281 liner, NAR65507] BEARINGS 6 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 6 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 6 NRE27364 NR55647 Bearing rod pair Bushing con rod .030 Honable, for 1.37 pin, use with rod cast# R51727, R80034 6 NR55647S Bushing con rod Borable, for 1.37 pin, optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 1 NRE501580 NRE38852 Set overhaul Set cylinder head Does not include crank seals (Replaces NRE38858) 1 RP343 Set oil pan Includes oil pump installation gaskets 1 1 NR114157 NR75728 Gasket cylinder head Gasket valve cover 1 NR97344 Gasket oil pan 1 1 NR97350 NAR67942 Gasket fuel pump mtg Seal crankshaft front 1 NRE44574 Seal crankshaft rear seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit 1 NR82821 Camshaft 12 NT20073 Lifter Endurance Power Products Includes camshaft & lifters [NR82821, NT20073] Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 JD6059-1 (800) 467-5545 John Deere 6059D Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 4.33 Rod: R80034 Piston: RE19282 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 1 HKJD369 Valve kit 5/16" stem diameter, 12 rotators 6 6 NR90692 NR98062 Valve exhaust Valve intake 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 6 NR85687 Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 6 24 NR98063 NR91889 Valve insert Valve lock Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 12 NR26125 Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 12 NRE60005 NRE31617 Rotocap Valve seal Positive seal 26 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] Crankshaft Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway CRANKSHAFT 1 NAT22562 1 NR81989 Sleeve crank seal Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 6 ERE21076 Connecting rod Remanufactured: Cast# R80034 12 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 NAR79464 Oil pump Oil pump with 2.000 gear, housing marked R54629 1 1 NRE15940K NRE31929 Oil pump kit Oil cooler For pump with 2.000 gear, housing marked R54629 (replaces RP249) 1 RP386 Oil cooler installation kit 10 plate (Also order RP386 installation kit) FUEL / INJECTOR 6 1 NRE36935 NRE42211 Injector Fuel transfer pump New, pencil type; Marked: 28480, 28481 (Sub for RE36936) Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog COOLING SYSTEM WPUMP1 WPUMP2 Endurance Power Products JD6059-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 4.33 6059T Diesel Tractor: 660, 7200 Cotton Picker/Stripper: 7445, 9930 Rod: R80032, R113612 Piston: RE19278 Loader: 544E msn 300,000 -> ; 544EH, 544ER, 544G, 544GH, 544GLL, 544GTC ENGINE KITS RP657 RP647 Overhaul kit InFrame kit RP612 Underhaul kit CYLINDER KIT 6 NRE33115 Cylinder kit 6 NRE19278 Piston body 6 12 NR124230 NR54114 Piston pin Retainer piston pin 6 NRE66820 Ring set 6 6 NR116281 NAR65507 Cylinder liner Cylinder liner oring kit 6 NRE500023 Cylinder liner Liner with orings [NR116281, NAR65507] NCD15466 Cylinder liner shim .002 [NRE19278 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR116281 liner, NAR65507] BEARINGS 6 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 6 NRE27348 NRE27349 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NRE27358 Bearing rod pair .020 6 NRE27364 NR57451 Bearing rod pair Bushing con rod .030 Honable, use w/ rod cast# R56187, R80032 6 NR57451S Bushing con rod Borable, Optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 NRE501580 1 NRE501585 For 7200 tractor only 1 NRE38852 1 RP343 Set overhaul Set overhaul Does not include crank seals (Replaces NRE38858) Does not include crank seals (replaces NRE54844] Set cylinder head Set oil pan Includes oil pump installation gaskets 1 NR114157 Gasket cylinder head 1 1 NR75728 NR97344 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 1 NAR67942 NRE44574 Seal crankshaft front Seal crankshaft rear seal with sleeve Camshaft kit Includes camshaft & lifters [NR82821, NT20073] CAMSHAFT 1 NRE53884 Endurance Power Products JD6059-2 (800) 467-5545 John Deere 6059T Diesel (Continued) Camshaft 6 Cylinder Bore 4.19 Stroke 4.33 Rod: R80032, R113612 Piston: RE19278 1 NR82821 12 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 VALVE TRAIN 1 CYLHEAD HKJD369 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 5/16" stem diameter, 12 rotators 6 NR90692 Valve exhaust 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 6 6 NR98062 NR85687 Valve intake Valve insert 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 6 NR98063 Valve insert Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 24 12 NR91889 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE60005 Rotocap 12 26 NRE31617 R85363 Valve seal Bolt cylinder head Positive seal 1/2 x 4-1/2, flanged head [check length for proper bolts] Marked T23266, R108658, R108679; Flange: 4 bolt hole, 1 dowel; Snout: 1 bolt hole, 1 keyway CRANKSHAFT 1 1 NAT22562 NR81989 Crankshaft Sleeve crank seal 1 NH35244 Packing Front Front crank sleeve CONNECTING ROD 6 NRE42733 Connecting rod 6 ERE16494 Connecting rod New; Cast# R113612 [also works for cast# R80032] Remanufactured: Cast# R80032 12 NR80033 Bolt connecting rod Use with rod casting# R80032, R80034 OIL / LUBE SYSTEM 1 NAR79464 Oil pump Oil pump with 2.000 gear, housing marked R54629 1 NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) 1 1 NRE31929 RP386 10 plate (Also order RP386 installation kit) Oil cooler Oil cooler installation kit FUEL / INJECTOR 6 1 NRE36939 NRE42211 Injector Fuel transfer pump New, pencil type; Marked: 28484, 28485 (Sub for RE38087) Includes NR97350 mounting gasket WATER PUMP WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog 1 TURBO R43724 TURBOCHARGER Exhaust sleeve New or remanufactured available, call for pricing 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 1 R43724G Exhaust sleeve 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing 2 702299C1 Turbo seal ring COOLING SYSTEM WPUMP1 WPUMP2 TURBO / AIR Endurance Power Products JD6059-2 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 5.00 6068D Diesel Rod: R56187 Piston: RE28919 Loader: LX100-2 ENGINE KITS RP660 RP650 Overhaul kit InFrame kit RP613 Underhaul kit CYLINDER KIT 6 NRE28966 Cylinder kit 6 NRE28919 Piston body 6 12 NR124230 NR54114 Piston pin Retainer piston pin 6 NRE66820 Ring set 6 6 NR121867 NAR65507 Cylinder liner Cylinder liner oring kit 6 NRE500024 Cylinder liner Liner and orings [NR121867, NAR65507] NR65833 Cylinder liner shim .004 [NRE28919 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] BEARINGS 6 NRE27352 Bearing main pair Standard NRE27353 NRE27360 Bearing main pair Bearing main pair .010 NRE27368 Bearing main pair NAT21139 NAT21132 Bearing thrust pair Bearing thrust pair NAT21134 Bearing thrust pair NAT21136 NAR81786 Bearing thrust pair Bearing thrust pair NAR81788 Bearing thrust pair Flangeless, std Flangeless, .010 NAR81789 Bearing thrust pair Flangeless, .020 3 NAR81790 NR78598 Bearing thrust pair Thrust washer main Flangeless, .030 Std, use with flangeless thrust 1 NAR95932 6 NAR97517 NAR97653 Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair .010 Bearing rod pair NAR97654 Bearing rod pair .020 6 NAR97655 NR57451 Bearing rod pair Bushing con rod .030 Honable, use w/ rod cast# R56187, R80032 6 NR57451S Bushing con rod Borable, Optional useage for honable 1 1 NT20034 NT26321 Bushing idler Bushing idler upper lower 1 NR119874 Bearing cam Front Does not include crank seals (Replaces NRE38556) 1 1 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 GASKET & SEALS 1 NRE501569 Set overhaul 1 NRE38852 Set cylinder head 1 1 RP343 NR114157 Set oil pan Gasket cylinder head 1 NR75728 Gasket valve cover 1 1 NR97344 NR97350 Gasket oil pan Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 NRE44574 Seal crankshaft rear Includes oil pump installation gaskets seal with sleeve CAMSHAFT 1 NRE53884 Camshaft kit Includes camshaft & lifters [NR82821, NT20073] 1 NR82821 Camshaft Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 Endurance Power Products JD6068-1 (800) 467-5545 John Deere 6068D Diesel (Continued) 6 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: RE28919 12 NT20073 Lifter 1 NR81513 Tach drive shaft Slotted style; threaded 1 NR81514 Tach drive shaft Helical gear style, 12 tooth; threaded VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 6 HKJD369 NR90692 Valve kit Valve exhaust 5/16" stem diameter, 12 rotators 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 6 NR98062 Valve intake 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 6 6 NR85687 NR98063 Valve insert Valve insert Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 24 NR91889 Valve lock 12 12 NR26125 NRE60005 Valve spring Rotocap 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE31617 Valve seal Positive seal 26 R85363 Bolt cylinder head 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 NRE45517 Crankshaft Marked RE33687; Flange: flat, 4 bolt holes, 1 dowel; Snout: 1 keyway, 1 bolt hole, 1 gear 1 1 NRE41763 NR81989 Crankshaft Sleeve crank seal Marked R81113, R104523; Flange:6 bolt flywheel mounting 1 NH35244 Packing Front Front crank sleeve CONNECTING ROD 6 EAR66400 Connecting rod 12 NR74195 Bolt connecting rod Remanufactured: Cast# R56187 Use with rod casting# R54617, R56187 OIL / LUBE SYSTEM 1 NAR79464 Oil pump 1 NRE15940K Oil pump kit 1 NRE31286 Oil cooler Oil pump with 2.000 gear, housing marked R54629 For pump with 2.000 gear, housing marked R54629 (replaces RP249) FUEL / INJECTOR 4 NRE36939 Injector New, pencil type; Marked: 28484, 28485 (Sub for RE38087) 1 NRE42211 Fuel transfer pump Includes NR97350 mounting gasket WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog WPUMP2 WATER PUMP KIT For water pump repair kit refer to water pump catalog COOLING SYSTEM Endurance Power Products JD6068-1 (800) 467-5545 John Deere 6 Cylinder Bore 4.19 Stroke 5.00 6068T Diesel Rod: R56187 Piston: RE48469 Tractor: 6800, 6900, 7400, 7600 Spain Tractor: 7500 Combine: 9400 (6068H) European Combine: 2054, 2254 (6068T) Crawler Dozer: 750C Excavator: 690E, 690ELC, 790E, 790ELC Feller Buncher: 653 Loader: LX100-2; 624E msn 300,000 -> ; 624EH, 624G, 624GH Skidder: 640D, 640E; 648D msn 200,455 -> ; 648E ENGINE KITS RP661 Overhaul kit RP651 RP613 InFrame kit Underhaul kit CYLINDER KIT 6 6 NRE53073 NRE48469 Cylinder kit Piston body 6 NR124230 Piston pin 12 6 NR54114 NRE66820 Retainer piston pin Ring set 6 NR121867 Cylinder liner 6 6 NAR65507 NRE500024 Cylinder liner oring kit Cylinder liner NR65833 Cylinder liner shim [NRE48469 piston, NR124230 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] Liner and orings [NR121867, NAR65507] .004 BEARINGS 6 1 NRE27352 Bearing main pair NRE27353 Bearing main pair NRE27360 NRE27368 Bearing main pair Bearing main pair NAT21139 Bearing thrust pair NAT21132 NAT21134 Bearing thrust pair Bearing thrust pair Standard .010 .020 .030 Flanged, std Flanged, .010 Flanged, .020 Flanged, .030 NAT21136 Bearing thrust pair NAR81786 Bearing thrust pair Flangeless, std NAR81788 NAR81789 Bearing thrust pair Bearing thrust pair Flangeless, .010 Flangeless, .020 NAR81790 Bearing thrust pair Flangeless, .030 3 1 NR78598 NAR95932 6 NAR97517 Std, use with flangeless thrust Thrust washer main Thrust washer set main .007 oversize, use with flangeless thrust (set of 3) Standard Bearing rod pair NAR97653 NAR97654 Bearing rod pair Bearing rod pair .010 .020 NAR97655 Bearing rod pair .030 6 6 NR57451 NR57451S Bushing con rod Bushing con rod Honable, use w/ rod cast# R56187, R80032 Borable, Optional useage for honable 1 NT20034 Bushing idler upper 1 1 NT26321 NR119874 Bushing idler Bearing cam lower Front 1 NRE501569 1 NRE53910 For 7400 and 7600 tractors 1 NRE38852 1 RP343 Set overhaul Set overhaul Does not include crank seals (Replaces NRE38556) 1 NR114157 Gasket cylinder head 1 1 NR75728 NR97344 Gasket valve cover Gasket oil pan 1 NR97350 Gasket fuel pump mtg 1 NAR67942 Seal crankshaft front 1 GASKET & SEALS Set cylinder head Set oil pan Endurance Power Products Does not include crank seals Includes oil pump installation gaskets seal with sleeve JD6068-2 (800) 467-5545 John Deere 6068T Diesel (Continued) 1 NRE44574 6 Cylinder Bore 4.19 Stroke 5.00 Rod: R56187 Piston: RE48469 Seal crankshaft rear CAMSHAFT 1 1 NRE53884 NR82821 Camshaft kit Camshaft 12 NT20073 Lifter 1 1 NR81513 NR81514 Tach drive shaft Tach drive shaft Slotted style; threaded Helical gear style, 12 tooth; threaded Includes camshaft & lifters [NR82821, NT20073] Threaded tach drive, if old cam tach drive was press-in also need NR81513 or NR81514 VALVE TRAIN 1 CYLHEAD HKJD369 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 5/16" stem diameter, 12 rotators 6 NR90692 Valve exhaust 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G 6 6 NR98062 NR85687 Valve intake Valve insert 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 6 NR98063 Valve insert Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree 24 12 NR91889 NR26125 Valve lock Valve spring 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE60005 Rotocap 12 26 NRE31617 R85363 Valve seal Bolt cylinder head Positive seal Crankshaft Crankshaft Marked RE33687; Flange: flat, 4 bolt holes, 1 dowel; Snout: 1 keyway, 1 bolt hole, 1 gear 1/2 x 4-1/2, flanged head [check length for proper bolts] CRANKSHAFT 1 1 NRE45517 NRE41763 1 NR81989 Sleeve crank seal Marked R81113, R104523; Flange:6 bolt flywheel mounting Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 6 EAR66400 Connecting rod Remanufactured: Cast# R56187 12 NR74195 Bolt connecting rod Use with rod casting# R54617, R56187 OIL / LUBE SYSTEM 1 NAR79464 Oil pump Oil pump with 2.000 gear, housing marked R54629 1 NRE15940K Oil pump kit For pump with 2.000 gear, housing marked R54629 (replaces RP249) 1 NRE31286 Oil cooler FUEL / INJECTOR 6 NRE36939 Injector New, pencil type; Marked: 28484, 28485 (Sub for RE38087) Fuel transfer pump Fuel pump electric Includes NR97350 mounting gasket WPUMP1 WATER PUMP WPUMP2 WATER PUMP KIT New or remanufactured available, refer to: Agricultural Water Pump Catalog For water pump repair kit refer to water pump catalog 1 NRE42211 1 NAH130127 Combine: 9400 COOLING SYSTEM TURBO / AIR TURBO TURBOCHARGER 1 R43724 Exhaust sleeve 1 2 R43724G 702299C1 Exhaust sleeve Turbo seal ring Endurance Power Products New or remanufactured available, call for pricing 3.500 OD, 3.00 ID, 2.500 OAL (optional with R43724G upgrade) 3.500 OD, 3.00 ID, 2.500 OAL, Upgrade to use with 702299C1 seal rings for better sealing JD6068-2 (800) 467-5545 John Deere Diesel Powertech 6 Cylinder Bore 4.19 Stroke 5.00 6.8 PT Rod: R123959, R500000, R114081, R500335 Piston: RE505101, RE505100, RE505102 Tractor: 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610 Combine: 9400, 9410, 9450 Windrower: 4990, 4995 Dozer: 750C, 750C II Excavator: 200LC, 230LC/LCR/LCRD, 270LC, 690E, 690ELC Loader: 544H/HLL, 624H/HLL Backhoe: 710D Feller: 643G/H, 653E/G, 740H, 840H, 843H Skidder: 360D/DC/DG, 460D/DC, 540G/GII/GIII, 548G/GII/GIII, 640G/GII/GIII, 648G, 843G ENGINE KITS RP816 Overhaul kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R123959 RP817 RP818 Overhaul kit Overhaul kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R500000 Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R123959 RP819 Overhaul kit Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R500000 RP820 RP821 Overhaul kit Overhaul kit Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R114081 Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R500335 RP802 InFrame kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R123959 RP803 RP804 InFrame kit InFrame kit Non-Turbo: DF150; piston# RE59279, RE505101; Rod# R500000 Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R123959 RP805 InFrame kit Turbo: TF150, TF151; piston# RE59277, RE505100; Rod# R500000 RP806 RP807 InFrame kit InFrame kit Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R114081 Turbo: TF250, HF150, HF250; piston# RE55512, RE505102; Rod# R500335 RP826 Underhaul kit rod# R114081, R123959 RP827 Underhaul kit rod# R500000, R500335 CYLINDER KIT [NRE505101 piston, NR123178 pin, NM41029 ret, NRE66271 ring, NR121867 liner, NAR65507] 6 NRE505110 Cylinder kit Non-Turbo, 1.373 piston pin dia, piston# RE59279, RE505101; Rod# R123959, R500000 Non-Turbo, 1.373 pin dia 6 NRE505101 Piston [NRE505100 piston, NR123178 pin, NM41029 ret, NRE66271 rings, NR121867 liner, NAR65507] 6 NRE505111 Cylinder kit Turbo, 1.373 piston pin, piston# RE59277, RE505100; Rod# R123959, R500000 Turbo, 1.373 pin dia 6 NRE505100 Piston 6 NRE66271 Ring set use w/ piston # RE505100, RE505101 6 NR123178 Piston pin use w/ piston # RE505100, RE505101 12 NM41029 Retainer piston pin use w/ piston # RE505100, RE505101 [NRE505102 piston, NR1123177 pin, NR54114 ret, NRE66820 rings, NR121867 liner, NAR65507] 6 NRE505112 Cylinder kit Turbo, 1.623 piston pin, piston# RE55512, RE505102; Rod# R114081, R500335 Turbo, 1.623 pin dia 6 NRE505102 Piston 6 NRE66820 use w/ piston # RE505102 6 NR123177 use w/ piston # RE505102 12 NR54114 use w/ piston # RE505102 6 NRE500024 6 NR121867 Cylinder liner Cylinder liner 6 Cylinder liner oring kit NAR65507 Ring set Piston pin Retainer piston pin Liner and orings [NR121867, NAR65507] BEARINGS 6 1 6 NRE65165 Bearing main pair Std NRE65911 Bearing main pair .254mm undersize NRE65168 NRE65912 Bearing thrust pair Bearing thrust pair Std .254mm undersize NRE61253 Thrust washer set main NRE65908 NRE65909 Bearing rod pair Bearing rod pair Endurance Power Products Std .254mm undersize JD6068-3 9/13/2007 (800) 467-5545 John Deere Diesel Powertech 6 NR123960 DF150, TF150, TF151 6 NR114082 TF250, HF250 1 NR119874 1 NR114193 6 Cylinder Bore 4.19 Stroke 5.00 6.8 PT (Continued) Rod: R123959, R500000, R114081, R500335 Piston: RE505101, RE505100, RE505102 Bushing con rod 1.373 ID; use w/ rod# R500000, R123959 Bushing con rod 1.623 ID; use w/ rod# R500335, R114081 Bearing cam Front Bushing idler upper Does not include crank seals GASKET & SEALS 1 NRE501456 Set overhaul 1 1 NRE66085 NRE66083 Set inframe Set cylinder head 1 RP794 Set oil pan 1 1 NRE59810 NRE44574 Seal crankshaft front Seal crankshaft rear Includes oil pump installation gaskets CAMSHAFT 12 NR123565 Lifter VALVE TRAIN CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 1 6 HKJD369 NR98062 Valve kit Valve intake 5/16" stem diameter, 12 rotators 6 NR90692 Valve exhaust 12 12 NR26125 NRE60005 Valve spring Rotocap 1.375 OD, 1.021 ID, 2.174 free length, 0.177 wire dia, 7 coils 12 NRE31617 Valve seal Positive seal 24 NR91889 Valve lock 6 6 NR98063 NR85687 Valve insert Valve insert Intake, 1.550T ID, 1.856 OD, 0.2570 depth, 30 degree Exhaust; 1.345T ID, 1.695 OD, 0.2420 depth, 30 degree 1.835 head dia; 5.278 length; 0.3100 stem dia; 30 degree; 1G 1.673 head dia; 5.257 length; 0.3095 stem dia; 30 degree; 1G CRANKSHAFT 1 1 RE504639 NR81989 Crankshaft Sleeve crank seal Cast# R116076 Front 1 NH35244 Packing Front crank sleeve CONNECTING ROD 12 NR114083 Bolt connecting rod use w/ rod# R114081, R123959; 64mm length (2.94 inch, 75mm OAL) 12 NR501124 Bolt connecting rod use w/ rod# R500000, R500335; 61mm length (2.75 inch, 70mm OAL) Oil pump 1-5/8 gears OIL / LUBE SYSTEM 1 NRE504914 FUEL / INJECTOR 6 NRE60062 Injector non-turbo 6 NRE48786 Injector Turbo 1 NAH130127 Fuel pump electric Combine: 9400, 9410, 9450 New, pencil type; Marked 32262 New, pencil type; Marked 29279 COOLING SYSTEM WPUMP1 NRE505980 WATER PUMP Water pump New or remanufactured available, refer to: Agricultural Water Pump Catalog 1 1 NRE33705 Thermostat 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 1 1 NRE64354 NAR48675 Thermostat Thermostat 180 degree; Use with housing marked: R125402, T20218, R60256, R91165 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD6068-3 9/13/2007 (800) 467-5545 John Deere Diesel 6 Cylinder Bore 4.560 Stroke 4.750 6076 T/A/H Rod: R71074 Piston: RE57512 Tractor: 4055, 4255,4455, 4555, 4560, 4755, 4760; 4955 & 4960 (A) low ring; 7700, 7800; 8100 & 8200 & 8300 msn -> 9,999; 8560 low rg, 8570 Combine: 9500, 9500SH, 9600, CTS Cotton Picker: 9960, 9965, 9970 Forage harvester: 6610 Crawler dozer: 850C Excavator: 792DLC, 892ELC Loader: 644E, 644EH, 644ER, 644G Grader: 770B, 770BH, 772B, 772BH Skidder: 740G, 748E/G ENGINE KITS RP769 Overhaul kit Hi Ring, s/n -> 499999, does not include aftercooler gasket kit RP770 RP624 Overhaul kit Overhaul kit Lo Ring, s/n -> 499999, does not include aftercooler gasket kit Hi Ring, s/n 500000->, Exc 4955, 4960, 8560; does not include aftercooler gsk kit RP665 Overhaul kit Lo Ring, s/n 500000 ->, For 4955, 4960, 8560 Tractors, does not include aftercooler gsk kit RP623 RP664 InFrame kit InFrame kit Hi Ring, Exc 4955, 4960, 8560 Tractors, does not include aftercooler gsk kit Lo Ring, For 4955, 4960, 8560 Tractors, does not include aftercooler gsk kit RP663 Underhaul kit CYLINDER KIT 6 NRE60294 Cylinder kit Exc 4955, 4960, 8560 Tractors 6 NRE57512 Piston 6 NRE57517 Ring set 6 NRE60297 Cylinder kit For 4955, 4960, 8560 Tractors 6 NRE57731 Piston Hi Ring [NRE57512 piston, NR57771 pin, NE1343FN ret, NRE57517 rings, NR123969 liner, NAR98850] Hi Ring Hi Ring Lo Ring [NRE57731 piston, NR57771 pin, NE1343FN ret, NRE48380 rings, NR123969 liner, NAR98850] Lo Ring Lo Ring 6 NRE48380 Ring set 6 12 NR57771 NE1343FN Piston pin Retainer piston pin 6 NR123969 Cylinder liner 6 NAR98850 Cylinder liner oring kit 6 NR123969K NR93948 Cylinder liner Cylinder liner shim Liner with orings [NR123969, NAR98850] .002 NAR74814 NAR74816 Bearing main pair Bearing main pair Standard .010 NAR74817 Bearing main pair .020 NAR74818 NAR77748 Bearing main pair Bearing thrust pair .030 Flangeless, Standard NAR77750 Bearing thrust pair Flangeless, .010 NAR77751 NAR77752 Bearing thrust pair Bearing thrust pair Flangeless, .020 Flangeless, .030 1 NAR77747 6 NAR77753 NAR73277 Thrust washer set main Standard Thrust washer set main .007 O/S Standard Bearing rod pair NAR73279 Bearing rod pair .010 NAR73280 NAR73281 Bearing rod pair Bearing rod pair .020 6 NR74008 Bushing con rod 6 4 NR74008S NR87561 Bushing con rod Bearing cam Borable s/n -> 499999, does not include aftercooler gasket kit BEARINGS 6 1 .030 Honable GASKET & SEALS 1 1 NRG27878 NRG27881 Set overhaul Set overhaul 1 NRG27884 Set cylinder head s/n 500000 -> , does not include aftercooler gasket kit replaces NRE58471 1 RP621 Set oil pan Includes oil pump installation gaskets 1 1 RP685 RP116 Set conversion Set aftercooler Add to pan & head sets to create complete OH set Single pass (hsg# R50398, R69940) 1 RP706 Set aftercooler Double pass (hsg# R90995, R93918, R110232) Endurance Power Products JD6076-1 9/13/2007 (800) 467-5545 John Deere Diesel 6 Cylinder Bore 4.560 Stroke 4.750 6076 T/A/H (Continued) Rod: R71074 Piston: RE57512 1 NRE47336 Gasket cylinder head 1 NR49866 Gasket valve cover 1 NR71918 Gasket oil pan 1 NR49377 Gasket oil pan 2 2 NR83020 NR83021 Gasket manifold exhaust Double Gasket manifold exhaust Single 3 NR102838 Gasket manifold intake 1 1 NR46479 NR26058 Gasket thermostat Gasket rear seal hsg 1 NR99464 Gasket timing cover 1 1 NAR49025 NRE22764 Seal crankshaft front Seal crankshaft rear Includes wear sleeve Camshaft kit Early [NR108370 camshaft, NR105379 lifter] Lifter Early Camshaft kit Late [NR120872 camshaft, NR110126 lifters] Lifter Late (sub to NAR30547 or RP344 or RP621) [NAR30547: 404D E & M] [RP344: 404D L; 404T; 466D/T/A] [RP621: 6076] For stamped pan Dual Includes wear sleeve CAMSHAFT 1 NRG22421 esn -> 49999 12 NR105379 esn -> 49999 1 NRE57054 esn 500000 -> 12 NR110126 esn 500000 -> 1 NR82007 Plug cam end VALVE TRAIN 1 CYLHEAD RP510 NOTE Valve kit For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting Cast# R86427, R102932, R122112, R122491 1 6 6 RP510B Valve kit Same as RP510 - without seats NR84619 NR84618 Valve exhaust Valve intake 1.850 head dia; 6.178 length; 0.372 stem dia; 30 degree; 1G 2.008 head dia; 6.06 length; 0.373 stem dia; 30 degree; 1G 6 NR84976 Valve insert Exhaust, 1.454T ID, 1.778 ID top, 1.933 OD, .241 depth, 30 degree 6 24 NR84977 NT20077 Valve insert Valve lock Intake, 1.744T ID, 1.957 ID top, 2.051 OD, .241 depth, 30 degree 12 NR91822 Valve spring 12 NRE11410 Rotocap 6 R102882 Valve seal Exhaust 12 NT20129 Valve stem cap 1 RP366 Bolt cylinder head set (11) NR88043, (8) NR88044, (7) NR88045 esn -> 499999 these applications only: Tractor: 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 8560; Combine: 9500, 9600; Loader: 644E/ER; Grader: 770B/BH, 772B/BH CRANKSHAFT 1 RE53422 s/n -> 187657 1 RE53201 Crankshaft Marked: RE53203, R56934, R56979, R63451; Short nose: 3", helical timing gear Crankshaft Marked R104855, RE42671, RE63293; Long nose: 3.4" to shoulder of first main; Flange: Centering ring, 6 bolt, 1 dowel; Snout: 1 bolt hole, 2 keyway s/n -> 187657 - 499999 Marked: RE53199; short nose 3-inch; straight timing gear 1 RG23551 Crankshaft s/n 500000 -> 1 NAR57241 Damper vibration Tractor: 4455 1 RE15018 Dampener Tractor: 4055, 4255, 4455, 4755, 4955, 4560, 4760, 4960; Grader: 770B, 772B: esn -> 499,999; 6076 esn -> 499,999 Endurance Power Products JD6076-1 9/13/2007 (800) 467-5545 John Deere Diesel 6 Cylinder Bore 4.560 Stroke 4.750 6076 T/A/H (Continued) Rod: R71074 Piston: RE57512 1 RE16127 Dampener Grader: 770B, 772B: esn 500,000 -> CONNECTING ROD 6 EAR93341 Connecting rod 12 NR66452 Bolt connecting rod Remanufactured: Cast# R71074 OIL / LUBE SYSTEM 1 NRE507076 Oil pump Crank driven, less gear 1 RP1062 Oil pump repair kit Crank driven oil pump 1 NR26151 1 NAT25038 s/n -> 100664 1 NAR55394 s/n 100665 - 547515 1 NR50422 s/n -> 100664 1 NR51053 s/n 100665 - 547515 4 NR47153 s/n -> 547515 Spring oil press regulato 12 Plate Oil cooler Oil cooler 8 plate Tube oil cooler Tube oil cooler Oring oil cooler FUEL / INJECTOR Remanufactured, Nippondenso, KDAL 7 x 0.22 6 RE30160RX Injector 4055, 4255, 4455 Remanufactured, Nippondenso, KDAL 7 x 0.23 6 RE30159R Injector 4555, 4560, 4755, 4760, 4955 1 RP588 Injector line connector ki Threaded nut type use with KDEL type injector 1 NRE27786 Injector leak-off line 1 NAH130127 Fuel pump electric Combine: 9500, 9600, CTS COOLING SYSTEM 1 NRE68230 s/n 500,000 -> 1 NRE69847 Water pump NLA; New, Cast# RE39121, RE68230 Water pump kit 2 NAR72852 Thermostat Gear driven pump, use with housing marked R83561 (replaces NRE55994) 192 degree, 54mm 2 NAR48675 Thermostat 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO 1 465355-9001 Turbocharger Tractor: 4055, 4255, 4455, 4555, 4755, 4560, 4760 1 465355-9002 Turbocharger Tractor: 4955, 4960 Endurance Power Products Remanufactured [RE31258] Remanufactured [RE31259] JD6076-1 9/13/2007 (800) 467-5545 Endurance Power Products JD6076-1 9/13/2007 (800) 467-5545 John Deere Diesel Powertech 6 Cylinder Bore 4.56 Stroke 4.75 6081 / 8.1 PT Tractor: 7710, 7810, 7820, 7920; 8100 & 8200 & 8300 tsn 10,000 -> ; 8100T, 8110/T, 8120/T, 8200T, 8210/T, 8220/T, 8300T, 8310/T, 8320/T Tractor: 8400 (6081H tsn -> 86,535; 8.1PT tsn 86,536 ->); 8400T, 8410/T, 8420/T, 8520/T, 9100 Forage harvester: 6650, 6710 Combine: CTS 2, 9510/SH, 9540, 9550/SH, 9560, 9580, 9610, 9640, 9650/CTS/STS, 9660, 9750/STS, 9860 Dozer: 850C, 850CII ENGINE KITS 6081A,H sn -> 86535; contains NR66452 rod bolts (used with rod# R116340) 1 RP822 Overhaul kit For all 8000/81/82/83/84/85 series tractors also order NR125855 pan gasket 8.1 A,H sn 86536 -> ; contains NR501035 rod bolts (used with rod# R501034) 1 RP823 Overhaul kit For all 8000/81/82/83/84/85 series tractors also order NR125855 pan gasket 8.1 Powertech, Low compression 1 RP846 Overhaul kit 6081A,H sn -> 86535; contains NR66452 rod bolts (used with rod# R116340) 1 RP808 InFrame kit For all 8000/81/82/83/84/85 series tractors also order NR125855 pan gasket 8.1 A,H sn 86536 -> , contains NR501035 rod bolts (used with rod# R501034) 1 RP809 InFrame kit For all 8000/81/82/83/84/85 series tractors also order NR125855 pan gasket 8.1 Powertech, Low compression 1 RP845 InFrame kit 6081 A,H sn -> 86535; contains NR66452 rod bolts for use with rod# R116340 1 RP828 Underhaul kit For all 8000/81/82/83/84/85 series tractors also order NR125855 pan gasket 8.1 A,H Powertech sn 86536 ->; contains NR501035 rod bolts (used with rod# R501034) 1 RP844 Underhaul kit For all 8000/81/82/83/84/85 series tractors also order NR125855 pan gasket CYLINDER KIT 6 NRE64509 Cylinder kit 6081, 8.1Powertech 6 NRE62791 Cylinder kit 8.1L Powertech, Low Compression 6 NRE64170 Piston [NRE64170 piston, NR57771 pin, NE1343FN ret, NRE503528 rings, CL40081 liner, NAR98850 orings] Low comp [NRE65407 pist, NR57771 pin, NE1343FN ret, NRE503528 rings, CL40081 liner, NAR98850] 6 12 NR57771 NE1343FN Piston pin Retainer piston pin 6 NRE503528 Ring set 6 6 CL40081 NAR98850 Cylinder liner Cylinder liner oring kit NR93948 Cylinder liner shim .002 Std (replaces RE57170) .011 undersize (replaces RE57172) 1 cyl set BEARINGS 6 NRE504195 Bearing main pair 6 NRE504196 Bearing main pair 6 1 NRE504197 NRE504198 Bearing main pair Bearing thrust pair 1 NRE504199 Bearing thrust pair 1 1 NRE504200 NRE61253 6 NR116081 .022 undersize (replaces RE57178) Bearing thrust pair Thrust washer set main Std Bearing rod pair 6 NRE57167 Bearing rod pair .011 undersize 6 NR74008 s/n -> 86535 6 NR74008S s/n -> 86535 4 NR87561 Bushing con rod Honable Bushing con rod Borable .022 undersize (replaces NRE57173) Std (replaces RE57175) .011 undersize (replaces RE57177) Bearing cam GASKET & SEALS Does not include crankshaft seals and aftercooler gaskets 1 NRE57187 Set overhaul 6081, 8.1Powertech, for all 8000/81/82/83/84/85 series tractors also order NR125855 pan gasket Does not include aftercooler gaskets 1 NRE57186 Set cylinder head 6081, 8.1Powertech Includes oil pump installation gaskets 1 RP795 Set oil pan 6081, 8.1Powertech Endurance Power Products JD6081-1 9/13/2007 (800) 467-5545 John Deere Diesel Powertech 6 Cylinder Bore 4.56 Stroke 4.75 6081 / 8.1 PT (Continued) 1 RP843 Set oil pan Includes NR125855 pan gasket or all 8000/81/82/83/84/85 series tractors 1 RP707 Set aftercooler 8.1 Powertech; use with housing marked R127428 1 NRE55475 Gasket cylinder head 1 2 NR49866 NRE62776 Gasket valve cover Gasket manifold exhaust 2 NRE62777 Gasket manifold exhaust 3 1 NR120646 NR124607 Gasket manifold intake Gasket thermostat cvr 1 NR26058 Gasket rear seal hsg 1 1 NR119384 NRE504822 Gasket timing gear cvr Gasket oil pan 1 NAR49025 1 NRE22764 6081 1 NRE504363 8.1 Powertech Seal crankshaft front Includes wear sleeve Seal crankshaft rear Includes wear sleeve Seal crankshaft rear Includes wear sleeve CAMSHAFT 1 NRE57054 6081, 8.1Powertech 1 NR120872 12 NR110126 Camshaft kit Late [NR120872 camshaft, NR110126 lifters] Camshaft Lifter Late 1 Plug cam end NR82007 VALVE TRAIN For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting CYLHEAD NOTE Cast# R122419, R122492 1 RP512 Valve kit Non-Powertech; Tractor: 7710, 7810: tsn -> 89,999; 8100, 8200, 8300, 8400, 8210, 8310, 8410, 9100; Combine: 9510, 9550, 9610; 9650 with HH010 Same as RP512 - without seats 1 RP512B Valve kit Cast# R130818, R517486 1 RP514 Valve kit Powertech; Tractor: 7710, 7810: tsn 90,000 ->; Combine: 9650 with HH017 Same as RP514 - without seats 1 RP514B Valve kit 6 NR84619 Valve exhaust 6 NR84618 Valve intake 12 NR91822 Valve spring Non-Powertech; Head# R122419, R122492 12 R502187 Valve spring Powertech; Head# R130818, R517486 12 R136320 Valve spring retainer Non-Powertech; Head# R122419, R122492 12 R500098 Valve spring retainer Powertech; Head# R130818, R517486 24 NT20077 Valve lock 1.850 head dia; 6.178 length; 0.372 stem dia; 30 degree; 1G 2.008 head dia; 6.06 length; 0.373 stem dia; 30 degree; 1G [repl R104534] 12 NT20129 Valve stem cap 6 NR102882 Valve seal exhaust, Non-Powertech; Head# R122419, R122492 6 R501640 Valve stem seal exhaust, Powertech; Head# R130818, R517486 6 R119132 Valve insert Exhaust 6 Intake R121193 Valve insert CRANKSHAFT 1 NRE55522 Crankshaft Endurance Power Products JD6081-1 9/13/2007 (800) 467-5545 John Deere Diesel Powertech 1 NR63326 6 Cylinder Bore 4.56 Stroke 4.75 6081 / 8.1 PT (Continued) Gear crankshaft Rear CONNECTING ROD 12 NR66452 6081 12 NR501035 8.1 Powertech Bolt connecting rod Bolt connecting rod OIL / LUBE SYSTEM 1 NRE507076 Oil pump Crank driven, less gear 1 RP1062 Oil pump repair kit Crank driven oil pump FUEL / INJECTOR 1 RP588 Injector line connector ki Threaded nut type use with KDEL type injector Injector leak-off line 1 6 NRE27786 NR51937 11 NR51936 Packing tube nut 6 6 NR79604 NR79605 Tube nut Washer fitting 6 NR79606 Tee fitting Tube nut 1 NAH130127 Fuel pump electric Combine: 9510, 9610, 9650, CTS II COOLING SYSTEM 2 WPUMP1 WATER PUMP New or remanufactured available, refer to: Agricultural Water Pump Catalog NAR48675 Thermostat 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD6081-1 9/13/2007 (800) 467-5545 Endurance Power Products JD6081-1 9/13/2007 (800) 467-5545 John Deere Diesel 6 Cylinder Bore 5.12 Stroke 5.00 6101 / 10.1L Block: E: R98554, R105739; L: R116334, R116335 Rod: R63959 Piston: E: RE20275,RE42231,RE40433; L: RE57949 Tractor: 8760 (esn -> 499,999); 8770 & 8870 (esn 500,000 ->) Excavator: 990; 992E (esn -> 499,999); 450LC & 992ELC (esn 500,000 ->) Loader: 744E; 844 (esn 500,000 ->) Scraper: 862B (esn 500,000 ->) ENGINE KITS 1 RP234 s/n -> 499,999 1 RP842 sn 500000 -> 1 RP231 s/n -> 499,999 1 RP841 sn 500000 -> 1 RP620 All serial numbers Overhaul kit Overhaul kit InFrame kit InFrame kit Underhaul kit CYLINDER KIT 6 NRE40476 s/n -> 499,999 6 NRE42231 s/n -> 499,999 6 NR77640 s/n -> 499,999 6 NRE53215 sn 500000 -> 6 CL50010.1 sn 500000 -> 6 NAR82355 All serial numbers 6 NR64451 All serial numbers 12 NN51168 All serial numbers 6 NAR72351 All serial numbers Cylinder kit [NRE42231 piston, NR64451 pin, NN51168 ret, NAR82355 rings, NR77640 liner, NAR72351 orings] Piston replaces NRE20275 Cylinder liner Cylinder kit [Contains: NAR82355 piston, NR64451 pin, NN51168 retainers, CL500101 liner, NAR72351 orings] Cylinder liner Ring set Piston pin Retainer piston pin Cylinder liner oring BEARINGS 6 NAR101268 Bearing main pair Std (Tang: upper half offset, lower half center) NAR104122 NAR104123 Bearing main pair Bearing main pair .010 .020 NAR104124 Bearing main pair .030 NAR101269 NAR104126 Bearing thrust pair Bearing thrust pair Flangeless, Std (Tang: upper half offset, lower half center) Flangeless, .010 NAR104127 Bearing thrust pair Flangeless, .020 NAR104128 NAR89622 NAR89971 Flangeless, .030 Bearing thrust pair Thrust washer set main Std Thrust washer set main .007 oversize NAR101271 NAR104130 Bearing rod pair Bearing rod pair NAR104131 Bearing rod pair 6 NAR104132 NR69045 Bearing rod pair Bushing con rod 6 NR69045S 1 1 4 4 NR46903 s/n -> 499,999 4 NR87561 s/n 500,000 -> Bushing con rod Std .010 .020 .030 Honable Borable Bearing cam Bearing cam Endurance Power Products JD6101-1 9/13/2007 (800) 467-5545 John Deere Diesel 6101 / 10.1L (Continued) 6 Cylinder Bore 5.12 Stroke 5.00 Block: E: R98554, R105739; L: R116334, R116335 Rod: R63959 Piston: E: RE20275,RE42231,RE40433; L: RE57949 GASKET & SEALS 1 NRE37416 s/n -> 499,999 1 NRE56492 sn 500000 -> 1 NRE37417 s/n -> 499,999 1 NRE56491 sn 500000 -> 1 RP345 s/n -> 499,999 1 NR71919 1 NAR49025 Set overhaul Does not include crank seals or aftercooler gasket Set overhaul Does not include crank seals 1 Seal crankshaft rear Includes wear sleeve Includes wear sleeve Camshaft kit [NRE11137 cam, NR83569 capscrew, NAR41291 lifters] Camshaft Camshaft, capscrew NRE13310 Set cylinder head Set cylinder head Set oil pan Includes oil pump installation gaskets Gasket oil pan Seal crankshaft front (sub to RP345) CAMSHAFT 1 RP768 s/n -> 499,999 1 NRE11137 s/n -> 499,999 12 NAR41291 all serial numbers 1 NR26115 s/n -> 499,999 1 NR82007 s/n 500,000 -> Lifter Plug cam end Plug cam end VALVE TRAIN CYLHEAD NOTE 6 6 NR101304 NR101305 Valve intake Valve exhaust 24 NT20077 Valve lock 12 12 NR91822 NRE11410 Valve spring Rotocap 12 NT20129 Valve stem cap For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting CRANKSHAFT 1 AR92533 s/n -> 499,999 Crankshaft Marked R36350,R57730,R63476,AR78403 Connecting rod Bolt connecting rod Reman, Cast# R63959 Oil pump Oil pump repair kit Crank driven, less gear Crank driven oil pump WATER PUMP Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog TURBOCHARGER New or remanufactured available, call for pricing CONNECTING ROD 6 12 EAR79366 NR66453 OIL / LUBE SYSTEM 1 1 NRE507076 RP1063 COOLING SYSTEM 3 WPUMP1 NAR48675 180 degree, 54mm; Use with housing marked: R54808, R59051, R89294, R100878 TURBO / AIR TURBO Endurance Power Products JD6101-1 9/13/2007 (800) 467-5545 John Deere 6 Cylinder Bore 5.00 Stroke 5.43 6105 / 10.5L PT Diesel Powertech Tractor: 9200 CYLINDER KIT 6 12 NR64451 NN51168 Piston pin Retainer piston pin 6 NAR72351 Cylinder liner oring BEARINGS 6 NR69045 Bushing con rod Honable 6 NR69045S Bushing con rod Borable NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting VALVE TRAIN CYLHEAD 24 01889 Valve exhaust Intake and exhaust; 1.830 head dia, 7.716 length, 30 deg, 1G, Iconel 48 24 NR91889 161-1044 Valve lock Rotator [RE69878, RE55463] [Kit RE505499: (2) RE69878 rotator, (2) R116585 spring] CONNECTING ROD 12 NR66453 Bolt connecting rod esn -> 3700; use with rod marked R121174 COOLING SYSTEM 1 WPUMP1 NRE33705 WATER PUMP Thermostat 1 AR102258 Thermostat 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 180 degree blocking type TURBOCHARGER New or remanufactured available, call for pricing New or remanufactured available, refer to: Agricultural Water Pump Catalog TURBO / AIR TURBO Endurance Power Products JD6105-1 (800) 467-5545 Endurance Power Products JD6105-1 (800) 467-5545 John Deere 6 Cylinder Bore 5.00 Stroke 6.50 6125 / 12.5 PT Diesel Powertech Tractor: 9300, 9300T, 9400, 9400T Forage harvester: 6750, 6850 Excavator: 450LC Loader: 744MH & 744H CYLINDER KIT 6 NR64451 Piston pin 12 NN51168 Retainer piston pin 6 NAR72351 Cylinder liner oring BEARINGS 6 NR69045 Bushing con rod Honable 6 NR69045S Bushing con rod Borable CYLHEAD NOTE For complete and bare cylinder heads - Refer to Cylinder Head Catalog or Call with casting 24 48 01889 NR91889 Valve exhaust Valve lock Intake and exhaust; 1.830 head dia, 7.716 length, 30 deg, 1G, Iconel 24 161-1044 Rotator [RE69878, RE55463] [Kit RE505499: (2) RE69878 rotator, (2) R116585 spring] VALVE TRAIN CONNECTING ROD 12 NR66453 Bolt connecting rod esn -> 10513; use with rod marked R121174 COOLING SYSTEM WPUMP1 WATER PUMP 1 NRE33705 Thermostat New or remanufactured available, refer to: Agricultural Water Pump Catalog 180 degree; Use with housing marked: T19651, T20218, R60256, R127777 1 AR102258 Thermostat 180 degree blocking type TURBOCHARGER New or remanufactured available, call for pricing TURBO / AIR TURBO Endurance Power Products JD6125-1 (800) 467-5545 Endurance Power Products JD6125-1 (800) 467-5545
Similar documents
International / Farmall Engine Parts Catalog
POWER PRODUCTS, INC. Replacement Parts for InternationalĀ® / FarmallĀ® Engines Agricultural and Industrial Applications
More informationcatalog - allis chalmers engine
POWER PRODUCTS, INC. Replacement Parts for Allis ChalmersĀ® Engines Agricultural and Industrial Applications
More information