Eviews 9 installation instruction

Eviews 9 installation instruction
1. Software Installation
Eviews 9 can be used on Windows XP (refer to Stage 3), Windows 7 (refer to Stage
2) and Windows 8 (refer to Stage 3).
You can perform either an automated installation or the manual installation of Eviews
8. Both of the steps are depicted below:-
2. Automated Installation ( Windows 7)
*Special note for Windows 7 users, you must install this software in
Administrator mode.
(a)
Map the drive \\fs21\applications\PC_Software_Image\Student\Eviews8
and double click on the file “Eview8_Setup.bat”. The script would
automatically detect if you are you are using a 32bit or 64bit operating system.
(b)
A black screen similar to below will appear , type “Y” and press “Enter”
(c)
After that you will see the following screen and it takes 1 to 3 minutes to
complete the installation:
Page 1
6/25/2015
Eviews 9 installation instruction
(d)
Once the installation is completed, you will see the screen below. Press
any key to close the screen,
(e)
Go to Start Menu  All Programs  Eviews8 to launch the application.
3. Automated Installation ( Windows 8)
*Special note for Windows 8 users, you must install this software in
Administrator mode.
(a)
(b)
(c)
Map the drive \\fs21\applications\PC_Software_Image\Student\Eviews8
and double click on the file “EViews8_Win8.bat”. The script would
automatically detect if you are you are using a 64bit operating system.
A black screen similar to below will appear , type “Y” and press “Enter”
After that you will see the following screen and it takes 1 to 3 minutes to
complete the installation:
Page 2
6/25/2015
Eviews 9 installation instruction
(d)
(e)
Once the installation is completed, you will see the screen below. Press
any key to close the screen,
Go to Start Menu  All Programs  Eviews8 to launch the application.
4. Manual Installation ( Windows XP)
(a) Map the drive
\\fs21\applications\PC_Software_Image\Student\Eviews9\Install32 and
double click on “EViews8Installer.exe”
(b) Follow the sequence of installation as below. Click Next.
Page 3
6/25/2015
Eviews 9 installation instruction
(c) You will next be prompted with the following screen, select “I Accept…” and
click “Next” to proceed.
Page 4
6/25/2015
Eviews 9 installation instruction
(d) Click Next.
(e) Enter the Serial Number as “90K00172 - 2AFF4006 - 972B0F1C“ and
Name as “SMU” and click Next.
Page 5
6/25/2015
Eviews 9 installation instruction
(f) Enter the License Server address as “VIEWPA11”, as follows. Click Next.
(g) You will be prompted for a second concurrent License. Click “No”
(h) Click Next.
Page 6
6/25/2015
Eviews 9 installation instruction
(i) Click Next.
(j) Select No and click Next
(k) You will be prompted to have a short cut install and an icon on your desktop,
Click Yes.
Page 7
6/25/2015
Eviews 9 installation instruction
(l) Click Yes.
(m) Click Finish.
Page 8
6/25/2015