mesmerize/mesmerize solidUNIQUE - TRI-KES

specialty
mesmerize/mesmerize solid
WIDTH 36" (92 cm)
ROLL LENGTH 11 linear yards (10 meters) sold in full rolls
only
FACING Rayon
BACKING Paper
PATTERN MATCH Mesmerize: Non-reverse hang, 25.2" (64
cm) vertical repeat, straight across match; Mesmerize
Solid: Non-reverse hang, random match
FIRE TEST ASTM E-84 Tunnel Test: Class A, flame spread
20, smoke developed 10 (test procedure is comparable to
UL 723)
NFPA 265 Corner Burn Test: meets requirements for flame
spread, smoke developed and flashover
SPECIAL NOTE Please note that this material is not returnable
WARRANTY Product is guaranteed to be free of defects in
workmanship and material for four years
© 2014 Wall Source LLC
UNIQUE
WALLCOVERING
mesmerize/mesmerize solid installation
{Z}
BEFORE YOU START Carefully inspect all materials and make certain that the pattern and color are exactly as ordered.
No claims will be accepted for cut/installed material beyond the installation of 1 roll, or after 14 days of delivery.
SURFACE PREPARATION Remove all existing wallcovering, backing paper, paint, and all surface contaminations. Ensure the
surface is smooth and dry. Make sure to match the color to the wall when using drywall compound. Apply primer/sealer
and allow to dry.
ADHESIVE We recommend using a heavy duty, clear wallcovering adhesive.
HANGING Paste the back of the wallcovering. Do not use a paste machine. Book for 5-15 minutes to let adhesive penetrate
the material.
Do not crease the paper when folding length and do not pile after pasting.
Work quickly and, using a spatula or a brush, gently smooth the paper onto the wall.
Joints should be tightly butted. Gently use the seam roller to finish off the joint. Avoid excessive seam rolling as this may
cause damage.
Avoid getting adhesive onto the surface of the wallcovering. Immediately wipe off any excess paste with a soft, damp cloth
and then with a dry cloth. Do not rub or use a sponge as it may damage the surface of the wallcovering.
CLEANING Clean the surface of the wallcovering with a soft, damp cloth and then with a dry cloth. Do not rub or use a
sponge as it may damage the surface of the wallcovering.