Section 4 Hand Tools Pages 163-192

Craftsman®…Tools That Yield
the Results You Demand
Craftsman
Pliers/Snips
HAND
TOOLS
See our New Craftsman
locking pliers. Our solid
joint pliers are constructed
of heat-treated alloy steel
for maximum strength and
durability. (Pages 164-170)
Section Index
Screwdrivers
See our Selection of Screwdrivers. Our Professional
Screwdrivers are engineered with tough steel blades
and unique ergonomic soft-grip handle that helps
reduce slippage. (Pages 172-178)
Hand Tools
*FULL UNLIMITED WARRANTY NOTE:
If any Craftsman® hand tool ever fails to
give you complete satisfaction, simply
return it to the nearest Sears store
anywhere in the USA and Sears will
replace it, free of charge. This warranty
gives you specific legal rights, and you
may also have other rights which vary
from state to state.
HAND TOOLS . . . .180-192
Brushes . . . . . . . . . .190
Carpentry Tools . . . .186
Files . . . . . . . . . . . .190
Hacksaws . . . . . . . .181
Hammers . . . . .188, 189
Levels . . . . . . . . . . .191
Pocket Knives . . . . . .182
Punches/Chisels 184, 185
Putty Knives/Scrapers . .183
Riveters . . . . . . . . .187
Saws . . . . . . . .180, 181
Staplers/Nailers . . . .187
Tape Measures . . . . .192
PLIERS/SNIPS . . .164-172
Locking . . . . . . . . .170
Mini-Pliers . . . . . . . .171
Professional . . .164, 165
Pliers . . . . . . .166, 167
Retaining Ring . . . . .172
Sets . . . . . . . . .168, 169
Snips . . . . . . . . . . .171
SCREWDRIVERS . .172-180
Mini Screwdrivers . . .175
Nutdrivers . . . . . . . .180
Professional . . .176, 177
Ratcheting . . . .178, 179
Screwdrivers . . .172-174
163
HAND TOOLS
4
CRAFTSMAN PROFESSIONAL PLIERS
1
Craftsman®
Professional Pliers
7
8" Long Reach Long Nose
• Specialized Alloy Steel
for Toughness
2
• Double Wall Textured Cushion
Grip for More Comfort and
Better Hold
8
11" Long Reach Long Nose
• Solid Joint Pliers’ Cushion Grips
have Thumb Stops for Better Grip
3
• Slip and Arc Joint Pliers
have Flush Rivet Design
9
11" Long Neck Bent Nose
• Induction Hardened Blade for
Longer Wear
• Clear Coated for Rust
and Corrosion Protection
SAFETY WARNING:
PLASTIC “CUSHION GRIPS”
ARE INTENDED FOR COMFORT
AND DO NOT PROTECT FROM
ELECTRICAL SHOCK.
10
11" Long Neck Duckbill
4
5
6
1. CRAFTSMAN® 91⁄ 2" ARC JOINT PLIERS.
6. CRAFTSMAN® 9" LINESMAN PLIERS. Rounded
V-notch biased teeth for better gripping on round
or hex surfaces.
9-45481★ — Wt. 1.4 lbs.
9-45593★ — Wt. 1.5 lbs.
New England style head. Built-in fish tape puller.
2. CRAFTSMAN® 63⁄ 4" SLIP JOINT PLIERS
9-45478★ — Wt. 0.6 lbs.
7. CRAFTSMAN® PROFESSIONAL 8" LONG
REACH LONG NOSE PLIERS.
9-45585★ — Wt. 0.9 lbs.
3. CRAFTSMAN® 6" DIAGONAL CUTTING
PLIERS. Semi-flush cutting edge.
9-45572★ — Wt. 0.6 lbs.
8. CRAFTSMAN® PROFESSIONAL 11" LONG
NECK LONG NOSE PLIERS.
9-45595★ — Wt. 0.9 lbs.
4. CRAFTSMAN® 7" WIDE JAW DIAGONAL
CUTTING PLIERS. Spring loaded handles.
9. CRAFTSMAN® PROFESSIONAL 11" LONG
NECK BENT NOSE PLIERS.
9-45596★ — Wt. 0.9 lbs.
Semi-flush cutting edge.
9-45574★ — Wt. 0.9 lbs.
5. CRAFTSMAN® 8" LONG NOSE PLIERS
9-45582★ — Wt. 0.8 lbs.
Craftsman®
Professional
Plier Sets
10. CRAFTSMAN® PROFESSIONAL 11" LONG
NECK DUCKBILL PLIERS.
9-45597★ — Wt. 0.8 lbs.
2
1
1. CRAFTSMAN® PROFESSIONAL
7-PC. PLIER SET.
9-45478
9-45481
9-45572
9-45574
9-45582
9-45593
9-45585
63⁄4" Slip Joint
91⁄2" Arc Joint
6" Diagonal
7" Wide Jaw Diagonal
8" Long Nose
9" Linesman
8" Long Reach Long Nose
COMPLETE 7-PC. SET
9-45225★ — Wt. 5.3 lbs.
2. CRAFTSMAN® PROFESSIONAL 5 PC.PLIER SET
WITH 7" ROBO-GRIP. Includes:
9-45478
9-45582
9-45008
63⁄4" Slip Joint 9-45574 7" Wide Jaw Diag
8" Long Nose
9-45481 91⁄2" Arc Joint
7" Curved Jaw Robo-Grip
COMPLETE 5 PC. SET.
9-45003★ — Wt. 3.2 lbs.
164
HAND TOOLS
CRAFTSMAN PROFESSIONAL PLIERS
Craftsman® Professional
Plier Sets
4
Craftsman® Professional
Robo-Grip® Pliers
CRAFTSMAN® PROFESSIONAL PLIERS. Specialized alloy steel
for extra toughness. Double-wall textured cushion grips and the
thumb stops on the solid-joint pliers afford
you a firmer, more comfortable grip. Clearcoated for excellent rust, corrosion
protection.
1
Straight Jaw
3
Curved Jaw
V-Notch Jaw
3. CRAFTSMAN® PROFESSIONAL 4 PC. PLIER SET. Includes:
63⁄4" Slip Joint
8" Long Nose
9-45193★ — Wt. 5.0 lbs.
9-45478
9-45582
9-45481 91⁄2" Arc Joint
9-45574 7" Wide Jaw Diag
1. CRAFTSMAN® PROFESSIONAL
ROBO-GRIP® PLIERS. Self adjust
around object. Spring loaded for one hand
operation. Exclusive cam mechanism
adjusts as quickly as you can squeeze the
handle. Unique design allows straight jaw to
grasp objects up to 3⁄ 4"; curved jaw grasps
objects up to 11⁄4". Laminated construction.
Size
7"
7"
9"
9"
Jaw
Type
Curved
Straight
Curved
V-Notch
Cat.
Number
9-45008★
9-45028★
9-45029★
9-45010★
Wt.
lbs.
0.4
0.4
0.9
0.9
Robo Grip® is a Registered Trademark of Applied Concepts, Inc.
2
4
4. CRAFTSMAN® PROFESSIONAL 3 PC. PLIER SET. Includes:
9-45574
9-45481
7" Wide Jaw Diag 9-45582 8" Long Nose
91⁄2" Arc Joint
9-45129★ — Wt. 2.1 lbs.
3
2. 3-PC. ROBO-GRIP® SET WITH
CASE. Includes 9-45010, 9-45008 and
9-45029 with plastic Robo Guards.
9-45191★ — Wt. 3.0 lbs.
5
5. CRAFTSMAN® PROFESSIONAL 3 PC. 11" LONG REACH
PLIER SET. Includes:
9-45597 Duck Bill
9-45596 Bent Nose
9-45319★ — Wt. 2.5 lbs.
3. CRAFTSMAN BELT LOOP
CARRYING CASES for Robo-Grip® pliers.
Durable soft plastic case with belt loop
backing. Tool not included. Wt. 0.2 lbs.
9-45014★— for 7" RoboGrip
9-45015★— for 9" RoboGrip
9-45595 Long Nose
165
4
HAND TOOLS
CRAFTSMAN PLIERS
6
Long-Nose
Pliers
Solid-Joint
Pliers
Diagonal-Cutting
Pliers
1
are constructed
of forged, highcarbon steel.
Inductionhardened
cutting edges
give you a
sure, clean cut.
High Visibility
DiagonalCutting Pliers
2
7
High Visibility
Long-Nose Pliers
8
Bent-Nose
Pliers
9
Long Reach
Long Nose Pliers
Wide-Jaw DiagonalCutting Pliers
3
10
High Visibility Long
Reach Needle Nose Pliers
High Visibility
Wide-Jaw
Diagonal-Cutting
Pliers
4
11
Duckbill Pliers
12
Long Reach
Needle Nose Pliers
Bent Wide Jaw
Diagonal
Cutting
Pliers
5
13
Long Reach
45° Bend Needle
Nose Pliers
Craftsman® Diagonal Cutting Pliers
1. CRAFTSMAN® DIAGONAL-CUTTING
PLIERS. Ideal for working on switchboards
or automobile ignition systems. Black
handles.
9-45077★— 5" — Wt. 0.3 lbs.
9-45075★ — 6" — Wt. 0.4 lbs.
9-45076★ — 7" — Wt. 0.5 lbs.
®
4. CRAFTSMAN HIGH VISIBILITY
HEAVY-DUTY WIDE-JAW
DIAGONAL-CUTTING PLIERS. Neon
orange handles. 7" long for more
leverage and easy cutting.
9-45074V★ — Wt. 0.6 lbs.
®
2. CRAFTSMAN® HIGH VISIBILITY
DIAGONAL CUTTING PLIERS. Neon
orange handles.
9-45075V★ — Wt. 0.4 lbs.
3. CRAFTSMAN® HEAVY-DUTY WIDEJAW DIAGONAL-CUTTING PLIERS.
7" long for more leverage and easy cutting.
Black handles.
9-45074★ — Wt. 0.6 lbs.
166
5. CRAFTSMAN BENT WIDE JAW
DIAGONAL CUTTING PLIERS. 7"
long for better leverage and cutting of
steel wire. Black handles.
9-45084★ — Wt. 0.5 lbs.
Craftsman® Long Nose Pliers
6. LONG-NOSE PLIERS let you form wire
loops, grip tiny pieces with the tapered jaws.
Side cutter. Black handles.
9-45102★ — 61⁄ 2" — Wt. 0.4 lbs.
9-45103★ — 8" — Wt. 0.5 lbs.
10. HIGH VISIBILITY LONG
REACH NEEDLE NOSE PLIERS.
Neon orange handles. 8" long.
9-45085V★— Wt. 0.5 lbs.
11. DUCKBILL PLIERS. For superior
7. HIGH VISIBILITY LONG-NOSE
PLIERS. Neon orange handle.
9-45103V★ — 8" — Wt. 0.4 lbs.
9-45087★ — Wt. 0.5 lbs.
8. BENT-NOSE PLIERS.
12. LONG REACH NEEDLE NOSE
PLIERS. 11" long. Black handles.
9-45388★ — Wt. 0.5 lbs.
For hard-to-reach areas are 6" long.
9-45104★ — Wt. 0.4 lbs.
gripping. 8" long. Black handles.
9. LONG REACH LONG NOSE PLIERS.
13. LONG REACH NEEDLE NOSE
PLIERS. 45° Bend. 11" long.
For hard to reach areas. 8" long. Black handles.
9-45085★ — Wt. 0.5 lbs.
9-45389★ — Wt. 0.5 lbs.
Black handles.
HAND TOOLS
CRAFTSMAN PLIERS
4
SAFETY WARNING:
PLASTIC “CUSHION GRIPS” ARE INTENDED FOR COMFORT
AND DO NOT PROTECT FROM ELECTRICAL SHOCK.
Arc Joint Pliers
4
Slip-Joint Pliers with
Wire-Cutting Slot
1
High Visibility Arc
Joint Pliers
5
High Visibility Slip-Joint
Pliers with WireCutting Slot
2
63⁄4" Ignition
Pliers
6
8" Hose Clamp
Pliers
3
Ignition Pliers
7
Craftsman® Slip-Joint Pliers
1. SLIP-JOINT PLIERS
WITH WIRE-CUTTING SLOT.
2. HIGH VISIBILITY SLIP-JOINT
PLIERS WITH WIRE-CUTTING SLOT.
Black handles.
Size Jaw Jaw Catalog Wt.
in.
Pos. cap. Number lbs.
63⁄ 4" 2 3⁄ 16" 9-45378★ 0.5
8"
2
1" 9-45379★ 0.6
10"
2 15⁄ 16" 9-45380★ 0.9
Neon orange handles.
Size Jaw Jaw
Catalog Wt.
in. Pos. cap. Number lbs.
3⁄ 16" 9-45378V★ 0.5
63⁄ 4" 2
8"
2
1" 9-45379V★ 0.6
3. 8" LONG HOSE CLAMP PLIERS.
Black handles.
9-45391★ — Wt. 0.7 lbs.
Craftsman® Arc Joint Pliers
4. ARC JOINT® PLIERS. Black handles.
Size Jaw Jaw Catalog Wt.
in.
Pos. cap. Number lbs.
4" 9-45384★ 2.9
161⁄ 2" 11
13"
7 21⁄ 2" 9-45386★ 1.7
5 11⁄ 2" 9-45381★ 0.9
91⁄ 2"
7⁄ 8" 9-45385★ 0.5
7"
3
5. HIGH VISIBILITY ARC JOINT
PLIERS. 91⁄ 2" long. Neon orange handles.
9-45381V★ — Wt. 0.9 lbs.
6. CRAFTSMAN® 63⁄4" ANGLE
NOSE SLIP JOINT PLIERS.
3 adjustments. Maximum parallel jaw
opening 3⁄ 4". Knurled steel handles.
9-45392★ — Wt. 1.1 lbs.
7. 5" IGNITION PLIERS.
Has 1⁄ 2" maximum parallel jaw opening.
3 adjustments. Alloy steel.
9-4513★— Wt. 1.1 lbs.
Craftsman® Lineman’s Pliers
8
Lineman’s
Pliers
8. LINEMAN’S PLIERS are perfect for
professionals who work with electrical and
telephone wires. Beveled nose has sidecutting jaws. Black handles.
Cat.
Jaw
Wt.
No.
O.A.L. cap.
lbs.
9-45088★ 5"
1.1"
0.5
9-45093★ 7"
1.35"
0.7
1
9-45094★ 8 ⁄2" 1.5"
1.0
9
Heavy Duty
Fence Tool
9. CRAFTSMAN® HEAVY DUTY
FENCE TOOL. 2 staple grips in nose. Vinyl
custom grips.
9-45325★ — 10" — Wt. 1.6 lbs.
10. CRAFTSMAN® END-CUTTING
NIPPER. Vinyl custom grips.
9-45326★ — 7" — Wt. 0.8 lbs.
10
End-Cutting
Nipper
167
4
HAND TOOLS
CRAFTSMAN PLIER SETS
1. CRAFTSMAN® 9-PC. SOLID JOINT PLIER SET.
Craftsman® Plier Sets
Includes
9-45074
9-45075
9-45085
9-45087
9-45088
7" Wide Jaw Diag.
6" Diagonal
8" Long Reach
8" Duckbill
5" Utility
9-45311★ — Wt. 4.6 lbs.
Craftsman Pliers Provide
Maximum Control
9-45094
9-45102
9-45103
9-45104
3
8" Linesman
6" Long Nose
8" Long Nose
6" Bent Long Nose
2. CRAFTSMAN® 6-PC. PLIER SET. Includes:
1
9-45093 7" Linesman
9-45378 63⁄4" Slip Joint
9-45074 7" Wide Jaw Diag 9-45103 8" Long Nose
9-45087 8" Duckbill
9-45381 91⁄2" Arc Joint
9-45441★ — Wt. 3.8 lbs.
3. CRAFTSMAN® 6-PC. PLIER SET. Includes:
9-45378 63⁄4" Slip Joint
9-45103 8" Long Nose
9-45094 8" Linesman
9-45421★ — Wt. 4.0 lbs.
9-45074 7" Wide Jaw Diag
9-45379 8" Slip Joint
9-45381 91⁄2" Arc Joint
4
4. CRAFTSMAN® 4-PC. PLIER SET. Includes
9-45103 8" Long Nose
9-45379 8" Slip Joint
9-45074 7" Wide Jaw Diag. 9-45088 5" Linesman
9-45272★ — Wt. 2.3 lbs.
5. CRAFTSMAN® 4-PC. PLIER SET. Includes:
9-45076 7" Diagonal
9-45103 8" Long Nose
9-45381 91⁄2" Arc Joint
9-45378 63⁄4" Slip Joint
9-45235★ — Wt. 2.4 lbs.
6. CRAFTSMAN® 4-PC. PLIER SET. Includes:
9-45076 7" Diagonal
9-45103 8" Long Nose
9-45413★ — Wt. 2.3 lbs.
9-45379 8" Slip Joint
9-45381 91⁄2" Arc Joint
5
2
6
Craftsman® High Visibility Pliers
7. CRAFTSMAN® 7-PC.
HIGH VISIBILITY
TOOL SET.
4 Screwdrivers
#1 x 4" Phillips
#2 x 4" Phillips
3⁄ 16" x 4" Slotted 1⁄ 4" x 4" Slotted
1 Adjustable Wrench
9-44603V 8"
2 Pliers
9-45378V 63⁄4" Slip Joint 9-45381V 9" Arc Joint
9-41546★ — Wt. 4.4 lbs.
8. CRAFTSMAN® 4-PC. HIGH VISIBILITY PLIER
SET. Neon orange handles. Includes: 91⁄2" Arc Joint
7
168
(9-45381V), 8" Long Reach Needle Nose (9-45085V),
8" Slip Joint (9-45379V), 7" Wide Jaw Diagonal
(9-45074V)
9-45234★ — Wt. 2.3 lbs.
8
HAND TOOLS
CRAFTSMAN PLIER SETS
Craftsman®
3-Pc. & 2-Pc. Plier Sets
1. CRAFTSMAN® 3-PC. PLIER SET.
9-45103 8" Long Nose
9-45378 63⁄4" Slip Joint
9-45381 91⁄2" Arc Joint
1
COMPLETE SET
9-45412★ — Wt. 1.6 lbs.
5
®
2. CRAFTSMAN 3-PC. PLIER SET.
9-45381 91⁄2" Arc Joint
9-45378 63⁄4" Slip Joint
9-45102 61⁄2" Long Nose
COMPLETE SET
9-45243★ — Wt. 1.9 lbs.
3. CRAFTSMAN® 3-PC. HEAVY DUTY
PLIER SET.
9-45380 10" Slip Joint
9-45381 91⁄2" Arc Joint
9-45386 13" Arc Joint
COMPLETE SET
9-45418★ — Wt. 3.8 lbs.
2
4. CRAFTSMAN® 3-PC. PLIER SET.
6
9-45102 6" Long Nose
9-45378 63⁄4" Slip Joint
9-45385 7" Arc Joint
3
COMPLETE SET
9-45007★ — Wt. 1.9 lbs.
5. CRAFTSMAN® 2-PC. PLIER SET.
9-45378 63⁄4" Slip Joint
9-45381 91⁄2" Arc Joint
COMPLETE SET
9-45415★ — Wt. 1.4 lbs.
6. CRAFTSMAN®3-PC. BENT NOSE
PLIER SET.
9-45104 61⁄2" Bent Nose
9-45084 7" Diagonal Cutting
9-45389 11" Bent Needle Nose
7
COMPLETE SET
9-45123★ — Wt. 1.7 lbs.
4
8
7. CRAFTSMAN® 3-PC. SLIP JOINT
PLIER SET.
9-45378 63⁄4"
9-45379 8"
9-45380
10"
COMPLETE SET
9-45233★ — Wt. 2.1 lbs.
8. CRAFTSMAN® 3-PC. PLIER SET.
9-45075 6" Diagonal
9-45102 61⁄2" Long Nose
9-45378 63⁄4" Slip Joint
COMPLETE SET
9-45285★ — Wt. 1.3 lbs.
9
Craftsman® Arc Joint Plier Sets
10
11
®
9. CRAFTSMAN 3-PC. LARGE
ARC JOINT PLIER SET. Includes:
9-45381 91⁄2"
9-45386 13"
9-45384 16"
9-45439★ — Wt. 5.9 lbs.
10. CRAFTSMAN® 3-PC. ARC-JOINT PLIER SET.
9-45385 7"
9-45381 91⁄2"
9-45386 13"
9-45293★ — Wt. 3.2 lbs.
11. CRAFTSMAN® 2-PC. ARC JOINT PLIER SET.
9-45385 7"
9-45381 91⁄2"
9-45410★ — Wt. 1.4 lbs.
169
4
4
HAND TOOLS
LOCKING PLIERS
Craftsman® Professional Locking Pliers
Curved Jaw
CRAFTSMAN® PROFESSIONAL
LOCKING PLIERS. Treated alloy
steel with soft grip handles. Patented
release mechanism eliminates the
need for a guarded trigger.
Catalog
No.
Jaw
Wt.
Size
Type
Cutter (lbs.)
5"
Curved
Yes
0.7
6" Long Nose Yes
0.8
7"
Curved
Yes
1.0
7"
Straight
No
1.0
10"
Curved
Yes
1.2
10"
Straight
No
1.2
9-45717★
9-45716★
9-45710★
9-45711★
9-45714★
9-45715★
CRAFTSMAN PROFESSIONAL 3-PC.
LOCKING PLIER SET. Includes 9-45715,
Long Nose
Straight Jaw
9-45710 and 9-45716.
9-45713★ — Wt. 3.1 lbs.
CRAFTSMAN PROFESSIONAL 2-PC.
LOCKING PLIER SET. Includes 9-45711
and 9-45714.
9-45712★— Wt. 2.2 lbs.
Craftsman® Professional
Auto-Lock Pliers
Automatically self-sizes with a squeeze. Eliminates
screw adjustment. Delivers up to 500 lbs. of grip
force. Laminated construction, padded handles.
Catalog
No.
Locks Wt.
Length/Jaw up to (lbs.)
7⁄ 8"
9-45306★ 6" Curved
0.5
9-45307★ 7" Straight
1"
0.6
9-45309★ 9" Curved 11⁄ 2" 1.1
CRAFTSMAN® 3-PC. AUTO LOCK PLIER SET.
CRAFTSMAN® 2-PC. AUTO LOCK PLIER SET.
Includes 6" curved (9-45306), 7" straight (9-45307)
and 9" curved (9-45309) pliers.
9-45305★ — Wt. 2.7 lbs.
Includes 7" straight (9-45307) and 9" curved
(9-45309) pliers.
9-45308★— Wt. 2.7 lbs.
Craftsman® Locking Pliers
CRAFTSMAN® LOCKING PLIERS. Internal screw adjustment. Spring-loaded
Straight Jaw
release and extended lever. Upper handle is 20% wider than traditional locking
pliers. Handle is poly-coated. Cross-functional teeth, extended tip surface. Heattreated alloy steel, nickel-plated for corrosion resistance. Jaws are laminated.
Length
Jaw
Catalog
Wt.
In.
opening
Number
lbs.
CRAFTSMAN® STRAIGHT JAWS
8"
11⁄ 2" 9-45604★
10"
13⁄ 4" 9-45607★
CRAFTSMAN® CURVED JAWS
6"
11⁄ 8" 9-45601★
8"
11⁄ 2" 9-45603★
10"
13⁄ 4" 9-45606★
CRAFTSMAN® LONG-NOSE PLIER
71⁄2"
13⁄ 4" 9-45602★
10"
21⁄ 4" 9-45605★
1.0
1.5
0.5
1.0
1.5
0.6
1.3
Curved Jaw
CRAFTSMAN® 4-PC. LOCKING PLIERS SET.
Includes 10" straight jaw, 6" curved jaw, 8" curved
jaw, 71⁄ 2" long nose.
9-45614★ — Wt. 3.7 lbs.
CRAFTSMAN® 3-PC. LOCKING PLIERS SET
(not shown).Includes 8" straight jaw, 10" straight
jaw, 10" curved jaw.
9-45613★ — Wt. 4.0 lbs.
CRAFTSMAN® 2-PC. LOCKING PLIERS SET
(not shown).Includes 8" straight jaw, 6" curved jaw.
9-45612★ — Wt. 1.5 lbs.
170
Long Nose
HAND TOOLS
MINI-PLIERS, CUTTERS AND SNIPS
Craftsman®Mini-Pliers
Solid joint “minipliers” for
close
delicate
work.
Double-leaf
springs for
ease of
operation.
Hard-honed
cutting edge
gives a
clean cut.
Plastic handle
grips.
Craftsman® Cutters
10 PowerSnip
37⁄8" blade
®
1
2
12 Handi-Cut™
11 Accu-Cut™
3
21⁄2" blade
5
Mini-Pliers are made in
China.
10. CRAFTSMAN® POWERSNIP® MULTI-PURPOSE
CUTTERS. 3" long sharp blades, one straight, one
12. CRAFTSMAN® PROFESSIONAL HANDI-CUT™
UTILITY CUTTERS. Cuts leather, rubber hose, plastic and
serrated. Spring loaded, 5:1 power ratio. Cushion grips.
Metal latch to hold closed when not in use. Cuts plastic, thin
gauge metal, vinyl, paper and more.
9-45466★ —Wt. 1.0 lbs.
more. Replaceable anvils and steel blades.
37⁄8" BLADE. Wt. 1.3 lbs.
11. CRAFTSMAN® PROFESSIONAL ACCU-CUT™ 3
IN 1 TOOL. A wire cutter, utility cutter and utility knife all
6
in one. Use the razor sharp stainless steel blade for straight
cuts on rubber hose, linoleum, plastics, drywall and more.
Titanium plating on wire cutting blade easily cuts copper
and light gauge steel wires. Slide bottom anvil back to
expose a utility knife blade. Includes extra blade that stores
in handle. Replaceable anvils and blades.
9-37310★ — Wt. 1.2 lbs.
4
7
REPLACEMENT PARTS FOR ACCU-CUT™ (9-37310).
Wt. 0.1 lbs.
9-37238★ — Replacement Anvil
9-37235★ — Set of 3 SS Blades
9-37237★ —Repl. Wire Cutter Blade
8
Catalog
Size No.
Wt.
lbs.
41⁄ 2" 9-45667★
0.2
41⁄ 2" 9-45663★
0.2
9-45660★
0.2
41⁄ 2" 9-45664★
0.2
41⁄ 2" 9-45665★
0.2
9-45661★
0.2
7. Round Nose 41⁄ 2" 9-45666★
0.2
8. Duck Bill
0.2
Item
1. End Nipper
4
9-37301★
21⁄2" BLADE. Wt. 1.0 lbs.
9-37300★
CRAFTSMAN® PROFESSIONAL HANDI-CUT™ 2-PC.
SET. Includes of 9-37300 and 9-37301. Wt. 2.2 lbs.
9-37304★
REPLACEMENT PARTS FOR HANDI-CUT™
CUTTERS.
REPLACEMENT ANVIL
For 9-37300. Wt. 0.1 lbs.
9-37232★
For 9-37301. Wt. 0.1 lbs.
9-37234★
SET OF 3 REPLACEMENT BLADES
For 9-37300. Wt. 0.1 lbs.
9-37235★
For 9-37301. Wt. 0.1 lbs.
9-37236★
14 Heavy Duty
Tin Snips
2. Wide Jaw
Diagonal
3. Diagonal
4"
13 Tinner Snips
4. Long Nose
With Cutter
16 Straight
Pattern Snips
5. Bent Needle
Nose
6. Needle Nose
5"
41⁄ 2" 9-45668★
15 Replaceable
Blade Snips
Metal Cutting Snips
13. CRAFTSMAN CIRCULAR PATTERN TINNER
SNIPS. Cut screening, sheet metal, tin or wire. Makes
9
9. 3 PC. MINI PLIER SET.
9-45664 41⁄2" Long Nose w/cutter
9-45661 5" Needle Nose
9-45660 4" Diagonal
9-45673★ — Wt. 0.5 lbs.
straight, irregular and circular cuts. Forged steel blades.
Catalog
Max.
Wt.
Number
Length Cap.
(lbs.)
3
9-45463★ 7"
1 ⁄4"
0.5
1
9-45461★ 10"
2 ⁄2"
1.0
9-45462★ 12"
3"
1.5
CRAFTSMAN 12" STRAIGHT PATTERN TINNER
SNIP (not shown).
9-45432★ — Wt. 1.5 lbs.
14. CRAFTSMAN 161⁄2" HEAVY DUTY TIN SNIPS.
Forged molybdenum steel blades.
21⁄2" maximum cut.
9-42784★ — Wt. 3.6 lbs.
15. CRAFTSMAN 12" REPLACEABLE BLADE SNIP.
Magnesium cast handles for strength and light weight, 31⁄2"
length of cut. Cuts up to 22 ga. cold-roll sheet steel.
9-42798★ — Wt. 0.9 lbs.
REPLACEMENT BLADES (not shown).
Set of 2 blades for 9-42798. High carbon steel. Includes
screws, hex nuts.
9-42799★ — Wt. 0.3 lbs.
16. CRAFTSMAN VINYL SIDING 12" STRAIGHT
PATTERN SNIP. 3" cut length. Plastic coated handles for
user comfort. WARNING: Do not use to cut any type of
metal. Special cutting edge designed to cut vinyls, plastics,
cloth, and other soft materials only. Warranty void if
product used improperly.
9-42788★ — Wt. 1.9 lbs.
171
4
HAND TOOLS
RETAINING RING PLIERS, SCREWDRIVERS
Craftsman® Pocket Clip Screwdriver
Craftsman® Professional
Retaining Ring Pliers
8
1
8. POCKET CLIP SCREWDRIVER
has a 1⁄ 8" x 2" slotted blade. 4" long.
9-41421★— Wt. 0.1 lbs.
4
2
Craftsman® Screw-Holding
Screwdriver
3
1. CRAFTSMAN® PROFESSIONAL
PLIER WITH RATCHET LOCK.
External sizes 11⁄ 2" thru 4". Internal
sizes 113⁄ 16" thru 4".
9-30376★ — Wt. 0.5 lbs.
2. CRAFTSMAN® PROFESSIONAL
PLIER. with adj. stop. External sizes
1⁄ 8"
thru 1". Internal sizes
1⁄ 4"
thru 1".
9-30353★ — Wt. 0.3 lbs.
3. CRAFTSMAN® PROFESSIONAL PLIER
9
External sizes 1⁄ 4" thru 2". Internal sizes 3⁄ 8" thru 2".
9-30354★ — Wt. 0.4 lbs.
4. CRAFTSMAN® PROFESSIONAL INTERNAL
AND EXTERNAL RETAINING RING PLIER KIT.
Includes: 9-30353 Plier with Adjustable Stop;
9-30354 Plier; and 9-30376 with Ratchet Lock in
heavy duty molded red plastic case with tip kits,
hex wrench, and instructions.
9-30359★ — Wt. 2.1 lbs.
Craftsman® Retaining Ring Pliers
9. CRAFTSMAN® SCREW-HOLDING
DRIVERS have thumb control for one-hand use.
4 PIECE SET includes listed
drivers. Wt. 0.6 lbs.
9-41364★
5
Catalog Number
9-41123★
9-41124★
9-41362★
9-41363★
Size
1⁄ 8" x 4"
3⁄ 16" x 5"
#1 x 4"
#2 x 5"
Wt.lbs.
0.1
0.2
0.1
0.2
Craftsman® Specialty Screwdrivers
6
10
11
7
5. CRAFTSMAN® RETAINING RING PLIERS.
Convertible to internal or external.
Large with .069 tips
9-45490★ — Wt. 0.5 lbs
Small with .038 tips.
9-45489★ — Wt. 0.3 lbs.
6. CRAFTSMAN® LOCK RING PLIERS. 7⁄ 8" jaw
opening. Knurled tips to grip snap rings at 90° angle.
9-45492★ — Wt. 0.4 lbs.
172
7. CRAFTSMAN® COMBINATION
RETAINING RING PLIERS.
For internal rings 3⁄8" to 13⁄4" and external
rings 1⁄4" to 17⁄16". 5 pr. of points: 0.039"
diam. 15° and 45°, 0.047" diam. 15° and
45°, 0.074" diam. 15°.
9-45488★ — Wt. 0.4 lbs.
10. CRAFTSMAN® TORX®
SCREWDRIVER has plastic handle
11. CRAFTSMAN® 4-IN-1
REVERSIBLE SCREWDRIVER.
that stores 4 vanadium alloy steel
bits (T-10, T-15, T-20, T-25). 4"
shank magnetizes bit for maximum
torque, less slippage. Wt. 0.3 lbs.
Interchangeable double-ended bits:
3⁄ 16" and 1⁄ 4" slotted; #1 and
#2 Phillips. Bits store in shaft.
9-41161★ — Wt. 0.4 lbs.
9-41401★
12
12. CRAFTSMAN® MAGNETIC
BIT HANDLE.
9-43373★ — Wt. 0.2 lbs.
HAND TOOLS
®
CRAFTSMAN SCREWDRIVERS
Craftsman®
Slotted Screwdrivers
CRAFTSMAN® SLOTTED SCREWDRIVERS
Catalog
No.
Blade
1⁄ 8" x 4"
9-41589★
3⁄ 16" x 11⁄ 2" 9-41854★
3⁄ 16" x 4"
9-41581★
3⁄ 16" x 4"†
9-41247★
3⁄ 16" x 6"
9-41577★
3⁄ 16" x 8"†
9-41248★
3⁄ 16" x 9"
9-41582★
1⁄ 4" x 11⁄ 2" 9-4151★
1⁄ 4" x 4"
9-41583★
1⁄ 4" x 8"
9-41578★
1⁄ 4" x 6"
9-41584★
1⁄ 4" x 12"
9-41585★
5⁄ 16" x 13⁄ 4" 9-41586★
5⁄ 16" x 6"
9-41579★
5⁄ 16" x 8"
9-41587★
3⁄ 8" x 8"
9-41852★
3⁄ 8" x 12"
9-41588★
† Cabinet Tip
Wt.
(lbs.)
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.1
0.4
0.3
0.3
0.4
0.3
0.4
0.4
0.5
0.7
Craftsman®
Torx® Screwdrivers
Craftsman®
Phillips Screwdrivers
CRAFTSMAN® PHILLIPS
SCREWDRIVERS (Round Shaft)
Size
#0
#1
#1
#2
#2
#2
#2
#3
#4
Blade
21⁄ 2"
11⁄ 2"
3"
11⁄ 2"
4"
6"
8"
6"
8"
4
CRAFTSMAN® TORX SCREWDRIVER
has star-shaped head.
Catalog
No.
Size
9-41473★ T-10
9-41474★ T-15
9-41475★ T-20
9-41476★ T-25
9-41479★ T-27
9-41477★ T-30
Catalog
No.
Wt.
(lbs.)
9-41293★ 0.1
9-41855★ 0.1
9-41294★ 0.1
9-4118★ 0.1
9-41295★ 0.2
9-41853★ 0.2
9-41296★ 0.3
9-41297★ 0.4
9-41298★ 0.5
Wt.
lbs.
0.1
0.1
0.1
0.1
0.2
0.2
CRAFTSMAN® 6-PC. TORX SET.
Includes: T-10, T-15, T-20, T-25,
T-27, T-30.
CRAFTSMAN® 4-PC. SLOTTED
SCREWDRIVER SET.
CRAFTSMAN® 4-PC. PHILLIPS
SCREWDRIVER SET.
Includes:
9-41581 3⁄16" x 4" 9-41589
9-41584 1⁄ 4" x 4" 9-41421
Includes:
9-41293 #0 x 21⁄2"
9-41294 #1 x 3"
1⁄ 8"
1⁄ 8"
x 4"
x 2"
COMPLETE SET.
9-41431★ — Wt. 0.7 lbs.
COMPLETE SET.
9-41407★ — Wt. 1.0 lbs.
CRAFTSMAN® 5 PC. TORX SET
with pouch. Includes: T-10, T-15,
T-20, T-25, T-27.
9-41295 #2 x 4"
9-41297 #3 x 6"
COMPLETE SET.
9-41753★ — Wt. 0.8 lbs.
COMPLETE SET.
9-41430★ — Wt. 0.7 lbs.
Craftsman®
5-Pc. Screwdriver Set
Craftsman®
Stubby Screwdriver Set
CRAFTSMAN®
5-PC. SCREWDRIVER SET. Includes 2 slotted: 3⁄16" x 4" (9-41581), and
CRAFTSMAN® 2-PC. STUBBY SCREWDRIVER SET.
1⁄ 4"
Includes 1 slotted (3⁄32" x 11⁄2") and 1 Phillips (#0 x 11⁄2") screwdriver.
x 4" (9-41583); 2 phillips: #1 x 3" (9-41294), #2 x 4" (9-41295); and
4-in-1 pocket screwdriver (9-4160).
COMPLETE SET
9-41543★ — Wt. 0.2 lbs.
COMPLETE SET
9-41809★ — Wt. 0.7 lbs.
173
HAND TOOLS
CRAFTSMAN® SCREWDRIVER SETS
X
X
X
X
40-Pc. — 9-41062★
X
X
30-Pc. — 9-41042★
X
X
22-Pc. — 9-41564★
Craftsman®
Screwdriver
Sets
21-Pc. — 9-41083★
10-Pc. Set — 9-41144
18-Pc. — 9-41098★
30-Pc. — 9-41042
16-Pc. — 9-41505★
9-Pc. Set — 9-41099
22-Pc. — 9-41564
10-Pc. — 9-41144★
16-Pc. Set — 9-41505
9-Pc. — 9-41099★
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Catalog No. Size/Desc.
Craftsman Slotted Screwdrivers
18-Pc. Set — 9-41098
21-Pc. Set — 9-41083
9-41541
9-41421
9-41589
9-41854
9-41581
9-41577
9-41582
9-41247
9-41248
9-4151
9-41583
9-41584
9-41578
9-41585
9-41586
9-41579
9-41587
9-41588
3⁄ 32"
x 11⁄ 2" Micro
x 2"
1⁄ 8" x 4"
3⁄ 16" x 11⁄ 2"
3⁄ 16" x 4"
3⁄ 16" x 6"
3⁄ 16" x 9"
3⁄ 16" x 4" Cabinet
3⁄ 16" x 8" Cabinet
1⁄ 4" x 11⁄ 2"
1⁄ 4" x 4"
1⁄ 4" x 6"
1⁄ 4" x 8"
1⁄ 4" x 12"
5⁄ 16" x 13⁄ 4"
5⁄ 16" x 6"
5⁄ 16" x 8"
3⁄ 8" x 12"
X
1⁄ 8"
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Phillips Screwdrivers (Round Shaft)
40-Pc. — 9-41062
9-41542
9-41293
9-41855
9-41294
9-4118
9-41295
9-41853
9-41296
9-41297
9-41298
#0 x 11⁄ 2"
#0 x 21⁄ 2"
#1 x 11⁄ 2"
#1 x 3"
#2 x 11⁄ 2"
#2 x 4"
#2 x 6"
#2 x 8"
#3 x 6"
#4 x 8"
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Craftsman Torx® Screwdriver
9-41473
9-41474
9-41475
9-41476
9-41479
9-41477
T-10
T-15
T-20
T-25
T-27
T-30
X
Specialty Screwdrivers
9-4160
4-Way Pocket
9-41028
Scratch Awl - Stubby Hdle
1⁄ 4" x 1⁄ 4" Slotted Offset
9-41314
1⁄ 4 x #2 Offset
9-41315
9-41316
#1 x #2 Phillips Offset
9-41141
#1 Robertson
9-41142
#2 Robertson
9-4114
Reed Prince
3⁄ 16" x 6" Slt. Speed Drv.
9-41270
9-41278
#1 x 6" Phil. Speed Drv.
9-41124
Screw Holding S.D.
—
Case
Set Wt. (lbs.)
174
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2.8 3.6 2.8 3.9 4.8 4.4 5.0 7.5
HAND TOOLS
MICRO-TECH SCREWDRIVER SETS AND SPECIALTY SCREWDRIVERS
Craftsman® Micro-Tech Screwdrivers
CRAFTSMAN® MICRO-TECH SCREWDRIVERS
for precision work. 11⁄2" blade length. Made in USA.
Catalog
Blade
Blade
Wt.
Number
Type
Size
lbs.
9-45721★ Slotted 3/64"
0.1
9-45722★ Slotted 1/16"
0.1
9-45723★ Slotted 5/64"
0.1
9-45724★ Slotted 3/32"
0.1
9-45725★ Slotted 1/8"
0.1
9-45726★ Phillips #000
0.1
9-45727★ Phillips #00
0.1
9-45728★ Phillips #0
0.1
®
9-45729★ Torx
T-6
0.1
®
9-45730★ Torx
T-7
0.1
®
9-45731★ Torx
T-8
0.1
®
9-45732★ Torx
T-9
0.1
SET OF 12 CRAFTSMAN® MICRO-TECH
SCREWDRIVERS. Includes each size listed above.
9-45736★ — Wt. 0.4 lbs
4
Craftsman® Professional
Micro-Tech Screwdrivers And Nutdrivers
CRAFTSMAN® PROFESSIONAL MICRO-TECH
SCREWDRIVERS AND NUTDRIVERS.
4" Blades. Made in USA. Wt. 0.1 lbs.
Catalog Number Blade Size
5⁄ 64"
9-41521★
3⁄ 32"
9-41522★
1⁄ 8"
9-41523★
9⁄ 64"
9-41524★
5⁄ 32"
9-41525★
9-41526★
#00
9-41527★
#0
9-41528★
#1
9-41551★
T-6
9-41552★
T-7
9-41553★
T-8
9-41554★
T-9
1⁄ 16"
9-41691★
5⁄ 64"
9-41692★
3⁄ 32"
9-41693★
7⁄ 64"
9-41694★
1⁄ 8"
9-41695★
5⁄ 32"
9-41696★
3⁄ 32"
9-41864★
1⁄ 8"
9-41865★
5⁄ 32"
9-41866★
3⁄ 16"
9-41867★
7⁄ 32"
9-41868★
1⁄ 4"
9-41869★
Blade Type
Slotted
Slotted
Slotted
Slotted
Slotted
Phillips
Phillips
Phillips
Torx®
Torx®
Torx®
Torx®
Hex
Hex
Hex
Hex
Hex
Hex
Nutdriver
Nutdriver
Nutdriver
Nutdriver
Nutdriver
Nutdriver
CRAFTSMAN® PROFESSIONAL 5-PC.
MICRO-TECH TORX® SCREWDRIVER
SET. In plastic pouch. Includes T-6, T-7,
T-8, T-9 and T-10 sizes.
9-45737★ — Wt. 0.2 lbs.
CRAFTSMAN® PROFESSIONAL 8-PC.
MICRO-TECH SCREWDRIVER SET.
In plastic pouch. Includes 5⁄64", 3⁄32", 1⁄8",
9⁄ 64", 5⁄ 32", #00, #0 and #1 sizes.
9-41489★ — Wt. 0.3 lbs.
Craftsman® Precision
Screwdrivers
PRECISION SCREWDRIVER SET.
®
Craftsman Precision screwdriver set has
5 blades: .040", .055", .070", .100" slotted
and one Phillips. Storage case.
9-4107★ — Wt. 0.1 lbs.
Craftsman® Multi-Blade Screwdriver
CRAFTSMAN®
MULTI-BLADE
PRECISION
SCREWDRIVER SET. Swivelling head,
locking screw chuck. Blades store in handle.
Includes 5 blades: 1⁄16", 5⁄64" and 3⁄32 slotted;
#00 Phillips; T6 Torx®.
9-45735★ — Wt. 0.1 lbs.
Craftsman® Cotter Key Puller
CRAFTSMAN® PROFESSIONAL 5-PC.
MICRO-TECH SCREWDRIVER SET.
In plastic pouch. Includes 3⁄32", 1⁄8", #00,
#0 and #1 sizes.
9-41520★ — Wt. 0.3 lbs.
Craftsman® Scratch Awl
CRAFTSMAN SCRATCH AWL.
9-41028★ — Wt. 0.1 lbs.
5⁄ 32",
#00, #0, #1, and Hex sizes 5⁄64", 3⁄32",
and 1⁄8".
9-41544★ — Wt. 0.5 lbs.
7⁄ 64"
Craftsman® 4 in 1 Precision Screwdriver
CRAFTSMAN® 4 IN 1
PRECISION
SCREWDRIVER. 2 double
ended blades (1⁄8" and 5⁄64" slotted,
#000 and #0 Phillips). Swiveling head.
51⁄8" OAL.
9-45734★ — Wt. 1.0 lbs.
Craftsman® Screwstarter & Offset Screwdriver
CRAFTSMAN SCREW STARTER starts
CRAFTSMAN COTTER KEY PULLER
9-4319★ — Wt. 0.3 lbs.
CRAFTSMAN® PROFESSIONAL
10-PC. MICRO-TECH SCREWDRIVER
SET. In plastic pouch. Includes 3⁄32", 1⁄8",
most standard screws with 15 in.-lb. torque.
Releases automatically. Alloy steel blade, bit.
55⁄8" long.
FOR SLOTTED SCREWS:
9-41024★— Wt. 0.2 lbs.
FOR PHILLIPS AND TORX:
9-41025★— Wt. 0.2 lbs.
CRAFTSMAN OFFSET
SCREWDRIVER. For
use in close quarters.
Nickel plated, high carbon
heat-treated steel. 41⁄4" long.
Slotted 1⁄4" and Phillips #2.
9-41315★ — Wt. 0.1 lbs.
175
4
HAND TOOLS
CRAFTSMAN® PROFESSIONAL SCREWDRIVERS
Slotted Screwdrivers
CRAFTSMAN® PROFESSIONAL
SLOTTED SCREWDRIVERS.
Black handles.
Catalog
Blade
Number
1⁄ 8" x 3"
9-47440★
3⁄ 16" x 4"
9-47441★
3⁄ 16" x 6"
9-47443★
3⁄ 16" x 6"† 9-47442★
1⁄ 4" x 21⁄ 4" 9-47439★
1⁄ 4" x 4"
9-47444★
† Cabinet Tip
Wt.
(lbs.)
0.1
0.3
0.3
0.3
0.2
0.3
Blade
1⁄ 4" x 6"
1⁄ 4" x 8"
5⁄ 16" x 6"
5⁄ 16" x 8"
3⁄ 8" x 8"
Catalog
Number
9-47445★
9-47446★
9-47448★
9-47447★
9-47449★
Wt.
(lbs.)
0.4
0.5
0.5
0.6
0.8
Phillips Screwdrivers
CRAFTSMAN® PROFESSIONAL
PHILLIPS SCREWDRIVERS.
Black handles.
Blade
in.
#0 x 3"
#1 x 4"
#2 x 21⁄ 4"
Catalog
Number
Wt.
(lbs.)
9-47434★ 0.1
9-47435★ 0.3
9-47433★ 0.3
Blade
in.
#2 x 4"
#3 x 6"
#4 x 8"
Catalog
Number
Wt.
(lbs.)
9-47436★ 0.3
9-47437★ 0.5
9-47438★ 0.8
CRAFTSMAN® PROFESSIONAL
TORX® SCREWDRIVERS.
Black handles.
Blade
in.
T-10 x 6"
T-15 x 6"
T-20 x 6"
Catalog
Number
Wt.
(lbs.)
9-47430★ 0.5
9-47431★ 0.5
9-47432★ 0.5
CRAFTSMAN® PROFESSIONAL
SLOTTED SCREWDRIVERS with high
visibility “Neon” orange handles.
Catalog
Wt.
Blade
Number
(lbs.)
1⁄ 8" x 3"
9-41891V★ 0.1
3⁄ 16" x 4"
9-41892V★ 0.3
1⁄ 4" x 6"
9-41894V★ 0.4
5⁄ 16" x 8"
9-41895V★ 0.6
3⁄ 8" x 8"
9-41897V★ 0.8
Torx® Screwdrivers
Craftsman® Professional Screwdrivers have larger handles for more turning
power than conventional screw-drivers. Feature a softer grip for even more turning
power and comfort in use. Grit-blasted blade tip grips screw better. Made in the USA.
High Visibility Screwdrivers
CRAFTSMAN® PROFESSIONAL
PHILLIPS SCREWDRIVERS with high
visibility “Neon” orange handles.
Catalog
Wt.
Blade
Number
(lbs.)
9-41885V★ 0.1
#0 x 3"
9-41886V★ 0.3
#1 x 4"
9-41887V★ 0.3
#2 x 4"
9-41888V★ 0.5
#3 x 6"
#4 x 8"
9-41889V★ 0.8
CRAFTSMAN® PROFESSIONAL
TORX® SCREWDRIVERS with high
visibility “Neon” orange handles.
Catalog
Wt.
Size
Number
(lbs.)
9-41870V★ 0.5
T-10
9-41871V★ 0.5
T-15
9-41872V★ 0.5
T-20
9-47460V★ 0.5
T-25
®
CRAFTSMAN PROFESSIONAL
8-PC. HIGH VISIBILITY ORANGE
HANDLED SCREWDRIVER SET.
Includes four Phillips (#0 x 3", #1 x 4",
#2 x 4", #3 x 6") and four slotted (1⁄8" x
3", 3⁄ 16" x 4", 1⁄ 4" x 6", 5⁄ 16" x 8") sizes.
9-41908★ — Wt. 2.3 lbs.
176
CRAFTSMAN® PROFESSIONAL
14-PC. HIGH VISIBILITY ORANGE
HANDLED SCREWDRIVER SET.
Includes five Phillips (#0 x 3",
#1 x 4", #2 x 4", #3 x 6", #4 x 8");
five slotted (1⁄8" x 3", 3⁄ 16" x 4",
1⁄ 4" x 6", 5⁄ 16" x 8", 3⁄ 8" x 8") and four
Torx® (T-10, T-15, T-20, T-25) sizes.
9-47472★ — Wt. 6.4 lbs.
HAND TOOLS
®
CRAFTSMAN PROFESSIONAL SCREWDRIVER SETS
4
8-Pc. Set
6-Pc. Set
2
1
12-Pc. Set
10-Pc. Set
3
4
Screwdriver
Sets
1. CRAFTSMAN® PROFESSIONAL 6-PC.
SCREWDRIVER SET. Black handles.
9-47440
9-47441
9-47445
1⁄ 8"
x 3" 9-47434
x 4" 9-47435
x 6" 9-47436
3⁄ 16"
1⁄ 4"
#0 x 3"
#1 x 4"
#2 x 4"
COMPLETE SET
9-47456★ — Wt.1.1 lbs.
1⁄ 8"
x 3"
x 4"
1⁄ 4" x 6"
5⁄ 16" x 8"
3⁄ 16"
9-47434
9-47435
9-47436
9-47343
COMPLETE SET
9-47457★ — Wt. 2.3 lbs.
3.CRAFTSMAN PROFESSIONAL 10-PC. 5. CRAFTSMAN® PROFESSIONAL 20-PC. 6. CRAFTSMAN® MASTER
SCREWDRIVER SET. Black handles.
SCREWDRIVER SET. Black handles.
25-PC SCREWDRIVER SET.
9-47440
9-47441
9-47444
9-47445
9-47447
1⁄ 8"
x 3"
x 4"
1⁄ 4" x 4"
1⁄ 4" x 6"
5⁄ 16" x 8"
3⁄ 16"
9-47442
9-47434
9-47435
9-47436
9-47437
3⁄ 16"
x 6"
#0 x 3"
#1 x 4"
#2 x 4"
#3 x 6"
COMPLETE SET
9-47458★ — Wt. 2.3 lbs.
4.CRAFTSMAN® PROFESSIONAL 12-PC.
SCREWDRIVER SET. Black handles.
2. CRAFTSMAN® PROFESSIONAL 8-PC.
SCREWDRIVER SET. Black handles.
9-47440
9-47441
9-47445
9-47447
®
#0 x 3"
#1 x 4"
#2 x 4"
#3 x 6"
9-47440
9-47441
9-47442
9-47444
9-47445
9-47446
1⁄ 8"
x 3"
x 4"
3⁄ 16" x 6"
1⁄ 4" x 4"
1⁄ 4" x 6"
1⁄ 4" x 8"
3⁄ 16"
9-47447
9-47434
9-47435
9-47436
9-47437
9-47438
COMPLETE SET
9-47459★ — Wt. 3.5 lbs.
5⁄ 16"
x 8"
#0 x 3"
#1 x 4"
#2 x 4"
#3 x 6"
#4 x 8"
9-47440
9-47441
9-47443
9-47442
9-47439
9-47444
9-47445
9-47446
9-47448
9-47447
x 3"
x 4"
3⁄ 16" x 6"
3⁄ 16" x 6"
1⁄ 4" x 21⁄ 4"
1⁄ 4" x 4"
1⁄ 4" x 6"
1⁄ 4" x 8"
5⁄ 16" x 6"
5⁄ 16" x 8"
3⁄ 16"
9-47449
9-47434
9-47435
9-47433
9-47436
9-47437
9-47438
9-47430
9-47431
9-47432
3⁄ 8"
x 8"
#0 x 3"
#1 x 4"
#2 x 21⁄4"
#2 x 4"
#3 x 6"
#4 x 8"
T-10 x 6"
T-15 x 6"
T-20 x 6"
COMPLETE SET
9-47452★ — Wt. 5.9 lbs.
Professional Screwdrivers have 25%
more turning power than conventional
screw-drivers. Grit-blasted blade tip
grips screw better, resists slipping.
Soft textured handle design for comfort
and grip. Made in the USA.
20-Pc. Set
5
1⁄ 8"
8-Pc. Professional Screwdriver Set
9-47440 1⁄8" x 3" 9-47434 #0 x 3"
9-47441 3⁄16" x 4" 9-47435 #1 x 4"
9-47445 1⁄4" x 6" 9-47436 #2 x 4"
9-47447 5⁄16" x 8" 9-47437 #3 x 6"
7-pc. Nutdriver Set
9-41974 3⁄8"
9-41977 3⁄16"
9-41975 7⁄16"
9-41971 1⁄4"
9-41976 1⁄2"
9-41972 5⁄16"
9-41973 11⁄32"
6-pc. Torx® Screwdriver Set
9-41473 T-10
9-41476 T-25
9-41474 T-15
9-41479 T-27
9-41475 T-20
9-41477 T-30
Other Tools
9-46701 Folding Hex Key Set
9-41028 Scratch Awl
9-41421 Pocket Screwdriver
9-41024 Screwstarter
COMPLETE SET
9-800304★— Wt. 6.2 lbs.
25-Pc. Set
6
177
4
HAND TOOLS
SPECIALTY SCREWDRIVERS
Craftsman® Professional
GripDriver II™ Sets
Craftsman® Ratcheting Magnetic
Screwdriver/Nutdriver
CRAFTSMAN® 29-PC. RATCHETING
MAGNETIC SCREWDRIVER/
NUTDRIVER SET. Includes 6 slotted
bits, 6 phillips bits, 4 Torx® bits, 7
nutdrivers, 2 Robertson bits, 2 hex socket
CRAFTSMAN® PROFESSIONAL 34-PC. GRIP DRIVER II™ RATCHETING
MAGNETIC SCREWDRIVER SET with new see-through handle design. Precision
crafted multi-position handle stores six bits inside, Handle pivots 45° for turning ease
and generates 350 lbs. of torque force. Handle grip for user comfort. Three-position
ratcheting mechanism with forward/reverse and fixed screwdriving modes. Magnet
holds hex-shank bits securely. Bits include six slotted (1⁄8", 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16");
four Phillips (#0, #1, #2, #3); eight Torx® (T6, T7, T10, T15, T20, T25, T30, T40); four
square head (#1, #2, #3, #4); two Reed Prince (#1, #2); five hex bits (1⁄8", 3⁄16", 5⁄64",
5⁄ 32", 1⁄ 4"); plus 1/4 inch driver adapter and three bit holders all in storage case.
9-47470★ — Wt. 1.9 lbs.
CRAFTSMAN® PROFESSIONAL 7-PC. GRIP DRIVER II™ RATCHETING
MAGNETIC SCREWDRIVER SET (not shown). Same driver as set 9-47470 but with
these bits: three slotted (3⁄16", 1⁄4", 9⁄32") and three Phillips (#1, #2, #3). No case.
9-47471★ — Wt. 0.7 lbs.
Craftsman® Professional
Ratcheting Magnetic Screwdriver Sets
bits, 1 magnetic screwdriver,
1 bit holder, molded carrying case.
Fully reversible ratchet action.
9-41862★ — Wt. 0.7 lbs.
Craftsman® Ratcheting Magnetic-Tip
Screwdriver
CRAFTSMAN® RATCHETING
MAGNETIC-TIP SCREWDRIVER
firmly holds bit and screw. Chromevanadium alloy steel tips, 4" shank.
Hollow plastic handle stores 3⁄16", 9⁄32"
slotted and Nos. 1 and 2 Phillips bits.
9-41466★ — Wt. 0.5 lbs.
CRAFTSMAN® NON-RATCHETING
MAGNETIC-TIP SCREWDRIVER
(not shown) same construction and bits
as (9-41466).
9-41467★ — Wt. 0.3 lbs.
4-BIT SET for 9-41466 and 9-41467.
9-41468★ — Wt. 0.1 lbs.
Craftsman® Power Grip™ Screwdrivers
CRAFTSMAN POWER GRIP™
SCREWDRIVERS. 4 bits store in
handle, 1 bit in drive end. Tip of shaft
is 1/4" hex nutdriver.
CRAFTSMAN® PROFESSIONAL 20-PC. RATCHETING
MAGNETIC SCREWDRIVER SET. Includes: four slotted
bits (3⁄16", 9⁄32", 5-6, 8-10); two Phillips bits (#1, #2); five
Torx® bits (T10, T15, T20, T25, T30); one screw finder; seven
nutdriver bits (3⁄16", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16") and driver.
9-41959★ — Wt. 0.8 lbs.
Craftsman® ReadyBit™
Ratcheting Screwdriver
11-IN-1 SCREWDRIVER. Non-magnetic.
5 double bits: Torx® T-15, T-20, T-25, T-30,
Slotted #3-4, #5-6, #12-14, Phillips #1, #2, #3.
9-41478★ — Wt. 0.5 lbs.
5-IN-1 SCREWDRIVER. Magnetic.
5 single bits: Torx® T-25, T-30, Slotted
#4-5, #8-10, Phillips #1, #2.
9-41529★ — Wt. 0.5 lbs.
Craftsman® Hand Impact Driver
PHILLIPS REPLACEMENT BITS
®
CRAFTSMAN® READYBIT™
RATCHETING SCREWDRIVER. Three-position silent
ratcheting mechanism to rapidly drive or release fasteners. Features
forward/reverse and lock positions for faster screwdriving and nutdriving. Revolving
bit storage rack in handle holds fifteen hex-shank insert bits. Includes five Phillips
(P1, three P2, P3), five slotted (4-6, two 6-8, two 8-10), four Robertson (two R1, two
R2) and Torx® T20. Bits secured by magnetic holder. Soft grip handle with rotating cap.
9-41796★ — Wt. 0.8 lbs.
178
CRAFTSMAN
HAND IMPACT
DRIVER SET includes
1/2" sq. drive tool,
adapter; Nos. 2, 3, 4
Phillips; 3⁄8" slotted bit.
Each impact turns bit up to 20°.
9-47641★— 2.1 lbs.
for (9-47641)
Type
Cat. No.
Wt. lbs.
9-47631★ 0.1
No. 1
9-47635★ 0.1
No. 2
9-47632★ 0.1
No. 3
No. 4
9-47636★ 0.1
STRAIGHT-SLOTTED BIT
3⁄ 8"
9-47637★ 0.1
HAND TOOLS
RATCHETING SCREWDRIVERS
Craftsman® Reversible Offset Ratchet
4
Craftsman® Ratcheting Screwdriver Set
CRAFTSMAN® 5-PC. REVERSIBLE
OFFSET RATCHET SET. Contains
ratchet, 1⁄4", 3⁄8" slotted bits, #1, #2
phillips bits.
9-41469★ — Wt. 0.2 lbs.
CRAFTSMAN® 25-PC. RATCHETING
SCREWDRIVER BIT WRENCH SET.
Craftsman® Offset Reversible
Ratcheting Screwdriver
Includes 1 offset ratcheting box wrench,
1 flat ratcheting box wrench, 1 magnetic
extension and 22 bits: sizes 3⁄16" and 9⁄32"
slotted; #1 and #2 phillips; T-10, T-15,
T-20, T-25, T-27, T-30, T-40, T-45 and
T-50 Torx; 3⁄16", 5⁄32", 5⁄64", 3⁄32", 7⁄64", 1⁄8",
9⁄ 64" and 7⁄ 32" hex. In plastic case.
9-42151★ — Wt. 1.4 lbs.
Craftsman® All In One Screwdriver
CRAFTSMAN ALL-IN-ONE
SCREWDRIVERS. Blades are
permanently stored in handle. Turn selector ring to
bring out blade, lock into place. 51⁄2" long handle.
9-4117★ — 1⁄4" x 3⁄8" Slotted
9-4119★ — #1 x #2 Phillips
9-4116★ — 1⁄4" Slotted x #2 Phillips
CRAFTSMAN® OFFSET
REVERSIBLE RATCHET
SCREWDRIVER has alloy
steel blades. Wt. 0.2 lbs.
®
Craftsman 25° Offset Reversible
Ratcheting Screwdriver
ALL-IN-ONE STANDARD SCREWDRIVER.
Includes 3 Phillips (#1, #2, #3) blades and
3 Slotted (1⁄8", 3⁄16", 1⁄4") blades.
9-41748★ — Wt. 0.7 lbs.
ALL-IN-ONE BALL END HEX
SCREWDRIVER. Includes 1⁄8", 9⁄64",
5⁄ 32", 3⁄ 16", 7⁄ 32", 1⁄ 4"
heads.
9-41781★ — Wt. 0.7 lbs.
Craftsman® Screwdriver
Bit
3
and Hand Driver Sets
CRAFTSMAN® 60-PC. SCREWDRIVER BIT
AND HAND DRIVER KIT. Includes: six
CRAFTSMAN® OFFSET REVERSIBLE RATCHET SCREWDRIVER SETS. Each
set incl. 25° offset wrench. Thumb-operated reversing lever.
Bits incl.
6-pc. Set
6-pc. Set
10-pc. Set
Phillips
#1, #2
—
#1, #2
3⁄ 16", 1⁄ 4", 9⁄ 16"
1⁄ 4", 3⁄ 32"
Slotted
—
Torx®
—
10, 15, 20, 25, 30 10, 15, 20, 40, 50
Wt.
0.5 lbs.
0.5 lbs.
0.5 lbs.
Cat. No.
9-43645★
9-43646★
9-43647★
10-pc. Set
—
5⁄ 64" thru 3⁄ 16"
—
0.5 lbs.
9-43648★
Craftsman® 5-Pc. Wrench Set
Phillips insert bits (#0, #1, #2R, #3 (2 ea.), #2);
four Robertson insert bits (R1, R2, R3, R4);
seven Torx® insert bits (T-10, T-15, T-20, T-25,
T-27, T-30, T-40); eight Slotted insert bits (1-2,
3-4, 4-5, 5-6, 6-8, 8-10, 10-12, 12-14); sixteen
Hex insert bits (5⁄ 64", 3⁄ 32", 7⁄ 64", 1⁄ 8", 9⁄ 64", 5⁄ 32",
3⁄ 16", 7⁄ 32", 1⁄ 4", 2mm, 3mm, 4mm, 5mm, 6mm,
7mm, 8mm); three Pozi insert bits (#1, #2, #3);
two Phillips powerbits (#1, #2); two slotted
powerbits (5-6, 8-10); seven Nutsetters (3⁄ 16",
1⁄ 4", 9⁄ 32", 5⁄ 16", 11⁄ 32", 3⁄ 8", 7⁄ 16"); two Bitholders;
two Hand drivers (8", 31⁄ 2"); Also includes finder
sleeves and case.
9-25649★ — Wt. 2.5 lbs.
CRAFTSMAN® 31-PC. MAGNITE BIT SET.
With 8" magnetic hand driver. Includes three
slotted insert bits (5-6, 6-8, 8-10); three Phillips
insert bits (#0, #1, #3); three Square insert bits
(R1, R2, R3); five Torx® bits (T-15, T-20, T-25,
T-30, T-40); two 2" Phillips powerbits (#1, #2);
two 2" Slotted powerbits (5-6, 8-10); C-3 clutch
insert bit; five Hex bits (5⁄ 64", 3⁄ 32", 7⁄ 64", 1⁄ 8",
3⁄ 16"); P2R Phillips drywall bit; two P2 Phillips
insert bits; two Screw finders; 3" magnetic bit
holder. Plastic case.
9-25647★ — Wt. 1.2 lbs.
CRAFTSMAN® 40-PC. SCREWDRIVER BIT
SET with case. Industrial quality alloy tool steel
CRAFTSMAN 5-PC. OFFSET REVERSIBLE RATCHETING SCREWDRIVER BIT
WRENCH SET WITH 4 BITS. Includes 1⁄4", 9⁄32" slotted and #1, #2 phillips bits.
25° offset head. Reversing lever. Raised knurl makes fingertip turning easy. Magnetic
bit holder. Vinyl grip. Fits any 1⁄4" hex bit.
9-41715★ — Wt. 0.2 lbs.
bits. Includes seven nutdrivers (7⁄16", 3⁄8", 11⁄32",
5⁄ 16", 9⁄ 32", 1⁄ 4", 3⁄ 16"); three double-end bits (#1
Phillips/6-8 slotted, #2 Phillips/8-10 slotted, #3
Phillips/10-12 slotted); six 31⁄2" extended reach
power bits (#1, #2, #3 Phillips and 6-8, 8-10,
10-12 slotted); twenty-four 2" power bits (three
#1 Phillips, five #2 Phillips, three #3 Phillips,
three 5-6 slotted, three 6-8 slotted, three 8-10
slotted, two T15 Torx®, two R2 square recess).
9-25607★ — Wt. 1.9 lbs.
179
HAND TOOLS
4
NUTDRIVERS AND HAND SAWS
Craftsman® Nutdrivers
Craftsman® Hand Saws
CRAFTSMAN® INDIVIDUAL NUTDRIVERS. Each Nutdriver size is color-coded.
STANDARD
Catalog
Number
9-41977★
9-41971★
9-41972★
9-41973★
9-41974★
9-41975★
9-41976★
1
METRIC
Size
3⁄ 16"
1⁄ 4"
5⁄ 16"
11⁄ 32"
3⁄ 8"
7⁄ 16"
1⁄ 2"
Wt.
(lbs.)
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Catalog
Number
9-41981★
9-41982★
9-41983★
9-41984★
9-41985★
9-41986★
9-41987★
Size
5mm
6mm
7mm
8mm
9mm
10mm
11mm
Wt.
(lbs.)
0.3
0.3
0.3
0.3
0.3
0.4
0.4
1. CRAFTSMAN® 121⁄2" DUAL-EDGE BLADE HAND SAW. One edge has 8 TPI for
aggressive cutting, other edge has 15 TPI for smoother cuts. Anti-friction blade coating,
hardwood handle. Fits in most tool boxes.
9-36247★ — Wt. 0.9 lbs
2
CRAFTSMAN® 7-PC. NUTDRIVER SETS.
Alloy steel sockets and shafts. Set includes all
7 sizes sold separately plus plastic carry rack.
Wt. 1.5 lbs.
STANDARD SET
9-4196★
METRIC SET
9-4197★
2. CRAFTSMAN® HAND SAWS.
®
Craftsman Cushion Grip Nutdrivers
Hardened carbon steel for longer life.
Use 8 point for fast cutting operations
and 13 point for smoother cuts.
Wood handle.
CRAFTSMAN® CUSHION GRIP
NUTDRIVERS feature large handles for better leverage. The chemical resistant
handles are 20% larger in diameter and provide 20% more torque than regular
Craftsman nutdrivers. Each nutdriver is color coded.
STANDARD
Catalog No.
9-42191★
9-42192★
9-42193★
9-42194★
9-42195★
9-42196★
9-42197★
Wt. (lbs.)
0.3
0.3
0.3
0.3
0.3
0.4
0.4
Catalog No.
9-42201★
9-42202★
9-42203★
9-42204★
9-42205★
9-42206★
9-42207★
Size Wt. (lbs.)
5mm
0.3
6mm
0.3
7mm
0.3
8mm
0.3
9mm
0.3
10mm
0.4
11mm
0.4
Length
9-36243★ 24"
9-36242★ 20"
9-36241★ 15"
9-36246★ 24"
9-36245★ 20"
9-36244★ 15"
Point
8
8
8
13
13
13
Wt.
(lbs.)
2.4
1.3
1.2
2.4
1.3
1.2
Craftsman® Specialty Saws
METRIC
Size
3⁄ 16"
1⁄ 4"
5⁄ 16"
11⁄ 32"
3⁄ 8"
7⁄ 16"
1⁄ 2"
CRAFTSMAN® HAND SAWS
Catalog
Number
3 Compass Saw
3. CRAFTSMAN COMPASS SAW.
High-carbon tempered steel 12" blade.
9-36630★ — Wt. 0.3 lbs.
CRAFTSMAN 7-PC. STANDARD
CUSHION GRIP NUTDRIVER SET.
Includes standard sizes in chart above.
9-42190★ — Wt. 2.3 lbs.
CRAFTSMAN 7-PC. METRIC
CUSHION GRIP NUTDRIVER SET.
Includes metric sizes in chart above.
9-42200★ — Wt. 2.3 lbs.
CRAFTSMAN 13-PC.
SCREWDRIVER/ NUTDRIVER SET.
Includes 3⁄ 16", 7⁄ 32", 1⁄ 4", 9⁄ 32", 5⁄ 16", 11⁄ 32",
3⁄ 8" nutdriver blades; 3⁄ 16", 1⁄ 4" slotted S.D.
blades; #1, #2 phillips screwdriver blades;
extension and handle.
9-45324★ — Wt. 3.0 lbs.
180
4
4. CRAFTSMAN® DRILL SAWS.
Have a flared sharp fluted tip to start
the hole and a spiral hardened shaft
with teeth for cutting. For drywall,
plaster, wood, plywood, masonite,
particle board, plastic and rubber.
Hardened plastic, ribbed handles.
Catalog No. Dia. Length Wt.(lbs.)
9-36024★ 3⁄16" 8"
0.2
9-36025★ 1⁄4" 12"
0.3
HAND TOOLS
SAWS, TAPE MEASURES
Craftsman® Hack Saws
1
4
Craftsman® Hacksaw Blades
Carbon steel blades for cutting mild steel, copper, brass, aluminum.
Catalog No.
9-92595★
9-92596★
Length
12"
10"
TPI
18
24
Pkg.
2
2
Craftsman® Bow Saw
5
2
5. CRAFTSMAN® BOW SAW 30"
Lever holds blade at proper tension.
Strong, lightweight, 1" oval shaped
tubular steel frame. Blade guard.
71-85329★ — Wt. 2.3 lbs.
3
CRAFTSMAN® REPLACEMENT
BLADES For 9-85329 (not shown).
Tapered blade — cuts on push and
pull strokes.
71-85330★ — Wt. 0.3 lbs.
6
4
7
1. CRAFTSMAN® FLUSH-CUTTING
SAW features a quick-release blade with
self-adjusting tension. Cuts in 4
positions. Front-end grip provides
additional control. Can be used as jab
saw. Aluminum, steel frame; enclosed
handle. 12" blade included.
9-36144★ — Wt. 1.6 lbs.
2. CRAFTSMAN® FLUSH-CUT SAW.
Front end grip, tension wheel. Cuts in 4
positions. Chrome plated tubular steel
tube is storage chamber for up to six
extra blades. One 12" blade included.
9-36143★ — Wt. 1.2 lbs.
3. CRAFTSMAN® ADJUSTABLE SAW.
Nickel-plated steel frame, high-impact (ABS)
plastic encl. handle. Cuts in 4 positions. Holds
10" to 12" blade.
9-36142★ — Wt. 1.0 lbs.
4. CRAFTSMAN® UTILITY HACKSAW.
Aluminum frame. Uses standard hacksaw blades.
9-36145★ — Wt. 0.3 lbs.
6. CRAFTSMAN DOVETAIL SAW. Steel blade with 11 teeth per inch.
21⁄ 2"x10" blade. Handle.
9-36252★ — Wt. 0.4 lbs.
7. CRAFTSMAN 16" BACKSAW.
11 Teeth per inch. Flat ground blade, hardwood handle.
9-36166★ — Wt. 1.2 lbs.
181
4
HAND TOOLS
MISCELLANEOUS TOOLS, KNIVES
Miscellaneous Tools
1. SEARS® GENERAL PURPOSE GLASS
CUTTER. One wheel cutter with honed special
alloy steel wheel. Malleable iron handle. Milled
breaker notches.
9-37940 — Wt. 0.1 lbs.
2
1
2. CRAFTSMAN® ELECTRICIAN’S KNIFE.
311⁄16". Stainless steel blades, Delrin® plastic
handle. Solid nickel-silver alloy bolsters. Heavy
duty shackle. Made in the U.S.A.
9-95237★ — Wt. 0.3 lbs.
3. CRAFTSMAN® PLASTIC FUSE PULLER.
For adjusting switch and fuse clips. Shock-proof,
plastic, solid grip jaws. Double-ended, reversible.
For fuses 0 to 200 Amp, 250 Volt; 0 to 100 Amp,
600 Volt. Pocket size.
34-82556★ — Wt. 0.1 lbs.
3
4. SEARS SAFETY SCRAPER. Holds single
edge blades firmly for scraping. Pocket sized.
Includes 5 single-edge blades.
9-94851 — Wt. 0.1 lbs.
4
SEARS SINGLE EDGE RAZOR BLADES.
.009. 50 wrapped blades in pkg.
9-94884 — Wt. 0.8 lbs.
Craftsman® Pocket Knives
8
5
9
CRAFTSMAN® LOCKBACK KNIVES. Stainless
steel blade locks open, thumb pressure releases
lock while you carefully close blade. Laminated
hardwood handle. Polished solid brass bolsters.
9-95233 also comes with Leather sheath with snap
button fits up to 2" belts.
Key Catalog No.
Size
Wt. lbs.
8. 9-95233★
415⁄16"
0.6
9. 9-95232★
4"
0.2
10. 9-95231★
3"
0.1
6
10
7
CRAFTSMAN KNIVES feature Stainless steel blades.
Laminated hardwood handles. Polished solid brass bolsters.
Catalog No. Length
Wt. lbs.
5. STOCK KNIVES
9-95234★ 31⁄4"
0.1
9-95235★ 4"
0.2
6. DOGLEG JACK KNIFE
9-95236★ 213⁄16"
0.1
7. PEN KNIFE
9-95241★ 25⁄8"
0.1
182
11
11. CRAFTSMAN 33⁄4" LOCKBACK
KNIFE. Glass filled Zytec® plastic
handle. Nylon belt sheath with hook and
loop closure.
9-95230★ — Wt. 0.2 lbs.
HAND TOOLS
KNIVES, SCRAPERS
Craftsman® Utility Knives
Replacement
Blades
2
1
3
7
1. CRAFTSMAN® REPLACEMENT BLADES.
4. CRAFTSMAN® UTILITY KNIFE
Heavy duty, .025" cutlery steel.
Catalog No. /Pkg. Wt. lbs.
9-94858★ 5
0.1
9-94859★ 100
0.4
has front-loading retractable blades. 3
blade positions. 2 extra blades store in
handle. String cutting feature. Cast
aluminum.
9-94853★ — Wt. 0.5 lbs.
2. CRAFTSMAN PLASTIC SCORING
REPLACEMENT BLADES. 2/pkg.
9-42036★ — Wt. 0.1 lbs.
3. CRAFTSMAN HOOK REPLACEMENT
BLADES. 5/pkg.
9-94858★ — Wt. 0.1 lbs.
5. CRAFTSMAN® UTILITY KNIFE
has 3-position blade for cutting, scraping.
3 extra blades store in handle. Cast
aluminum.
9-94854★ — Wt. 0.4 lbs
6. CRAFTSMAN® HIGH-VISIBILITY
UTILITY KNIFE. Cast aluminum.
adjusts to 3 cutting positions. 3 blades
in handle. Wt. 0.3 lbs.
9-94875★ — Yellow
9-94876★ — Green
9-94877★ — Orange
4
7. CRAFTSMAN® PRO-GRIP
RETRACTABLE UTILITY KNIFE. 19°
ergonomic design. Inc. 3 blades. High
visibility yellow zinc.
9-94893★ — Wt. 0.3 lbs.
5
8. CRAFTSMAN® LINOLEUM
KNIFE. Wood handle. Hawk bill.
9-94855★ — Wt. 0.3 lbs.
8
6
Craftsman® Putty Knives and Scrapers
9. CRAFTSMAN® 11⁄4" WIDE
PUTTY KNIFE has blade that extends
length of handle for strength. Riveted
hardwood handle. Extra stiff has chisel
edge. Wt. 0.1 lbs.
9-94814★ — Flex
9-94813★ — Stiff
9-94815★ — Extra Stiff
9
10. CRAFTSMAN® TAPE KNIFE
has flexible blade. Wt. 0.3 lbs.
9-94818★ — 4"
9-94819★ — 6"
10
11. CRAFTSMAN® SCRAPER.
Wt. 0.2 lbs.
9-94816★ — 3" Stiff
9-94817★ — 3" Flex
11
183
4
HAND TOOLS
4
PUNCHES AND CHISELS
1
Craftsman® Punch and Chisel Sets
Craftsman®
Punches
1. CRAFTSMAN® PIN PUNCHES.
2. CRAFTSMAN® LINE-UP TOOLS have
hardened ends. Meet Federal Specification
GGG-P-831e. Not for impact use. Black
oxide finish.
Catalog
Wt.
Point
No.
lbs.
5⁄ 32" x 7"
9-42901★ 0.2
3⁄ 16" x 9"
9-42902★ 0.4
1⁄ 4" x 12"
9-42903★ 0.8
Use to drive out pins and bolts. Meet Fed.
Specs. GGG-P-831e. Black oxide finish.
Catalog
Wt.
Point Lgth. No.
lbs.
1⁄ 16"
1
4 ⁄4" 9-42881★ 0.1
3⁄ 32"
47⁄16" 9-42882★ 0.1
1⁄ 8"
411⁄16" 9-42883★ 0.2
5⁄ 32"
5"
9-42884★ 0.2
3⁄ 16"
53⁄8" 9-42885★ 0.2
1⁄ 4"
3
5 ⁄8" 9-42886★ 0.2
2
3
Chrome vanadium steel, double heat-treated for durability and impact resistance.
Black oxide finish.
3. CRAFTSMAN® CENTER PUNCHES
4. CRAFTSMAN® PRICK PUNCH
mark points for drill holes.
pierces thin sheet metal, marks layout
lines. 3⁄8" point. 41⁄2" length.
9-42841★ — Wt. 0.2 lbs.
3⁄ 8" x 41⁄ 2" CENTER PUNCH
9-42861★ — Wt. 0.2 lbs.
1⁄ 2" x 6" CENTER PUNCH
9-42862★ — Wt. 0.3 lbs.
4
8
8. CRAFTSMAN® 26-PC. PUNCH/
CHISEL/ ALIGNMENT TOOL SET.
Includes: 4 nail sets (1⁄32", 1⁄16", 3⁄32",
1⁄ 8"); 1 prick punch (3⁄ 8"); 2 center
punches (3⁄8", 1⁄2"); 6 pin punches (1⁄16",
3⁄ 32", 1⁄ 8", 5⁄ 32", 3⁄ 16", 1⁄ 4"); 4 alignment
tools (5⁄32", 3⁄16", 1⁄4", 1⁄8"); 1 pry bar
(16"); 6 standard length cold chisels (1⁄4",
3⁄ 8", 1⁄ 2", 5⁄ 8", 3⁄ 4", 7⁄ 8"); 2 12" cold chisels
(1⁄2", 3⁄4").
9-43052★ — Wt. 7.7 lbs.
9
Craftsman® Cold Chisels
5
5. CRAFTSMAN® STANDARD-LENGTH COLD CRAFTSMAN® 3-PC. STANDARD
LENGTH COLD CHISEL SET (not
CHISELS.
Edge
1⁄ 4"
3⁄ 8"
1⁄ 2"
5⁄ 8"
3⁄ 4"
7⁄ 8"
Stk.
1⁄ 4"
5⁄ 16"
7⁄ 16"
1⁄ 2"
5⁄ 8"
3⁄ 4"
Lgth.
4"
5"
53⁄ 4"
6"
61⁄ 2"
71⁄ 2"
Catalog No.
9-42971★
9-42972★
9-42973★
9-42974★
9-42975★
9-42976★
Wt.
0.1
0.2
0.4
0.5
0.6
0.6
shown). Incl. 1⁄4", 3⁄8", 1⁄2" sizes.
9-4309★ — Wt. 0.5 lbs.
9. CRAFTSMAN® 24-PC. PUNCH,
CHISEL, NAIL SET AND LINE UP
TOOL SET. Includes: 4 nail sets (1⁄32",
1⁄ 16", 3⁄ 32", 1⁄ 8");
2 center punches (3⁄8",
6 pin punches (1⁄16", 3⁄32", 1⁄8", 5⁄32",
3⁄ 16", 1⁄ 4"); 1 prick punch (3⁄ 8"); 4 line up
1⁄ 2");
tools (5⁄32", 3⁄16", 1⁄4", 1⁄8"); 6 standard
length cold chisels (1⁄4", 3⁄8", 1⁄2", 5⁄8", 3⁄4",
7⁄ 8"); 1 16" pry bar. Hammer not
included.
9-43019★ — Wt. 6.3 lbs.
10
6
6. CRAFTSMAN® 12" LONG COLD
CHISELS. Black oxide finish.
Catalog No.
9-42851★
9-42852★
9-42853★
9-42854★
Size
1⁄ 2"
5⁄ 8"
3⁄ 4"
7⁄ 8"
7
Wt. lbs.
0.6
0.8
0.9
1.3
cold chisels at left.
9-43026★ — Wt. 3.7 lbs.
Craftsman® Rolling Wedge Bar
7. CRAFTSMAN® ROLLING WEDGE
BAR has 90° polished rolling head.
Measures 16" long. 9⁄ 16" diameter.
9-42892★ — Wt. 1.3 lbs.
184
CRAFTSMAN® 4 PC. 12" COLD
CHISEL SET. Includes 1 each of 12" long
10. CRAFTSMAN® 20-PC.
PUNCH, CHISEL, NAIL SET
AND LINE-UP TOOL SET.
Includes: 2 nail sets (1⁄32", 1⁄16"); 2
center punches (3⁄8", 1⁄2"); 6 pin
punches (1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16",
1⁄ 4"); 3⁄ 8" prick punch; 3 line-up
tools (5⁄32", 3⁄16", 1⁄4"); 6 standard
length cold chisels (1⁄4", 3⁄8", 1⁄2",
5⁄ 8", 3⁄ 4", 7⁄ 8"). Hammer not
included.
9-43022★ — 4.8 lbs.
HAND TOOLS
PUNCH AND CHISEL SETS
4
CRAFTSMAN® 9-PC. PUNCH, LINE-UP AND
CHISEL SET. Includes: 3 pin punches (1⁄16", 3⁄32",
1⁄ 8"); 3⁄ 8" center punch; 3⁄ 8" prick punch; 2 line-up tools
(3⁄16", 5⁄32"); 2 standard length cold chisels (1⁄2", 3⁄4")
9-43038★ — Wt. 2.1 lbs.
CRAFTSMAN® 16-PC. PUNCH, CHISEL, NAIL SET
AND ALIGNMENT TOOL SET. Includes: 2 nail sets
(1⁄32", 1⁄16"); 1 prick punch (3⁄8"); 1 center punch (3⁄8");
5 pin punches (1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16");
2 alignment tools (5⁄32", 3⁄16"); 3 cold chisels (1⁄4", 3⁄8", 5⁄8");
2 long cold chisels (1⁄4", 3⁄4").
9-43113★ — Wt.3.1 lbs.
CRAFTSMAN® 6-PC. HEAVY-DUTY PUNCH,
CHISEL AND LINE-UP SET. Includes: 1 prick
punch (3⁄8"); 1 center punch (1⁄2"); 2 standard length
cold chisels (1⁄2", 3⁄4"); 2 alignment tools (5⁄32", 1⁄4").
9-43045★ — Wt. 2.3 lbs.
CRAFTSMAN® 6-PC. PUNCH, CHISEL AND
LINE-UP SET (not shown). Includes: 1 center punch
(3⁄8"); 2 pin punches (3⁄32", 1⁄8"); 2 standard length cold
chisels (1⁄2", 3⁄4"); 1 alignment tool (3⁄16").
9-43121★ — Wt. 1.5 lbs.
CRAFTSMAN® 5-PC. PUNCH AND LINE-UP
TOOL SET. Includes 4 pin punches (1⁄16", 3⁄32", 1⁄8",
5⁄ 32"); 5⁄ 32"
line-up tool.
CRAFTSMAN® 14-PC. PUNCH, CHISEL AND LINEUP TOOL SET. Includes: 1 prick punch (3⁄8"); 1 center
CRAFTSMAN® 12-PC. PUNCH, CHISEL AND
LINE-UP SET. Includes: 4 pin punches (1⁄16", 3⁄32",
9-4285★ — Wt. 0.5 lbs.
punch (3⁄8"); 6 pin punches (1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4")
4 standard length cold chisels (1⁄4", 1⁄2", 5⁄8", 3⁄4"); 2
alignment tools (5⁄32", 3⁄16")
9-43122★ — Wt. 2.7 lbs.
1⁄ 8", 3⁄ 16"); 3⁄ 8"
CRAFTSMAN® 5-PC. PUNCH AND CHISEL SET
center punch; 3⁄8" prick punch;
2 line-up tools (3⁄16", 5⁄32"); 4 standard length cold
chisels (1⁄4", 1⁄2", 5⁄8", 3⁄4").
9-43036★ — Wt. 2.5 lbs.
(not shown). Includes: 2 pin punches (1⁄8", 3⁄16"); 3⁄8"
center punch; 2 standard length cold chisels (1⁄2", 5⁄8").
9-4301★ — Wt. 1.0 lb.
185
HAND TOOLS
4
PRY BARS, WOOD CHISELS, ALUMINUM SQUARES
Craftsman® Pry Bars
1
Aluminum Squares
7
7. CRAFTSMAN® ALUMINUM
FRAMING SQUARE. 16" x 24" aluminum
framing square has a 24" x 2" body, 16" x
11⁄2" tongue. Permanently stamped numbers
and graduations. 1⁄8" grad. scales.
1. CRAFTSMAN STEEL PULL-N-PRY BARS.
9-37342★ — 2" x 15" — Wt. 1.5 lbs.
9-37353★ — 5⁄8" x 51⁄4" — Wt. 1.1 lbs.
2. CRAFTSMAN PRY BAR. Chrome
vanadium steel. 1⁄2" x 16"
9-4283★ — Wt. 0.9 lbs.
ALUMINUM FINISH/BLACK
MARKINGS
9-39607★ — Wt. 1.2 lbs.
8
BLACK FINISH/WHITE MARKINGS
9-39615★ — Wt. 1.2 lbs.
2
8. CRAFTSMAN® BRASS STAIR
GAUGE. Angle or stair gauge is ideal for
3
rafter or framing squares and repeating
angles. Pkg. of 2.
9-39563★ — Wt. 0.1 lbs.
CRAFTSMAN 3-PC PRY BAR SET.
CRAFTSMAN PRY BARS. High visibility neon
Includes 9-43057, 9-43058, 9-43059.
9-43055★ — Wt. 3.7 lbs.
5⁄ 8"
CRAFTSMAN 5-PC PRY BAR SET.
Includes 9-43057, 9-43058, 9-43059,
9-43177 and 9-43178.
9-43067★ — Wt. 3.7 lbs.
orange butyrate handles. Black oxide finish on
hex stock.
Catalog
Wt.
Key No.
Length
(lbs.)
3
9-43059★ 16"
1.1
3
9-43177★ 18"
1.4
3
9-43178★ 24"
1.7
Craftsman® Center Punches and Scribers
5
4
4. CRAFTSMAN AUTOMATIC CENTER
PUNCH. Single hand operation. Adjusts for
light to heavy strokes. 51⁄4" long, 1⁄2" dia. body.
9-40541★ — Wt. 0.1 lbs.
9. CRAFTSMAN® RAFTER MARKING
SQUARE. Lays out common, jack, hip or
9
valley rafters. Heavy-duty extruded
aluminum.
9-39601★ — Wt. 0.7 lbs.
10. COMPANION® TRI SQUARE has 8"
10
blade with 1⁄8" graduations. High-impact
handle with acrylic vial. Top read window.
9-39569 — Wt. 0.4 lbs.
11. 16" CRAFTSMAN® COMBINATION
SQUARE has 1" blade with precision
ground edges and milled head. Incl. selfaligning drawbolt.
9-39681★ — Wt. 0.8 lbs.
11
5. CRAFTSMAN® SCRIBER. Engraves
glass, china, ceramics, steel. Tip reverses for
safety. Magnetic end retrieves small parts.
9-4078★ — Wt. 0.1 lbs.
Craftsman® Bars/Nail Pullers
12
Nail Sets
6. CRAFTSMAN 4 PIECE NAIL
SETTING SET. Heat treated and
CRAFTSMAN® WOOD
CHISELS. Ergonomically
designed contoured handles
with thumb impressions for better
control and comfort. Drop forged
carbon steel blades, hardened,
tempered and precision ground.
Metal striking caps.
INDIVIDUAL CHISELS
Catalog
Number
9-36850★
9-36851★
9-36852★
9-36853★
9-36854★
9-36855★
Wt.
Width (lbs.)
1⁄ 4"
0.3
1⁄ 2"
0.4
3⁄ 4"
0.4
1"
0.5
11⁄4"
0.5
11⁄2"
0.7
3 PIECE SET. Incl. 1⁄2", 3⁄4" and 1".
9-36857★— Wt. 1.3 lbs.
5 PIECE SET. Includes 1⁄4", 1⁄2", 3⁄4",
1" and 11⁄4".
9-36859★— Wt. 2.0 lbs.
186
13
6
tempered chrome vanadium alloy
steel. Striking end tempered to resist
chipping. Double knurled body.
Square head type. Includes: 1⁄32", 1⁄16",
3⁄ 32", 1⁄ 8" x 4" long. Black oxide finish.
9-37354★ — Wt. 0.4 lbs.
12. CRAFTSMAN STEEL
WRECKING BARS.
Catalog No.
9-37345★
9-37346★
9-37347★
Craftsman® Wood Chisels
Size
Wt. (lbs.)
x 12"
2.7
x 24"
3.9
3⁄ 4" x 30"
5.0
14
1⁄ 2"
3⁄ 4"
15
13. CRAFTSMAN RIP BAR. 3⁄4" x 171⁄4".
9-37341★ — Wt. 2.2 lbs.
14. CRAFTSMAN® DOUBLE END NAIL
PULLER. 5⁄8" x 11" cat’s paws.
9-37344★ — Wt. 1.2 lbs.
15. CRAFTSMAN® SINGLE END NAIL
PULLER. 5⁄8" x 12" cat’s paw.
9-37343★ — Wt. 1.2 lbs.
16
Block Plane
16. CRAFTSMAN® BLOCK PLANE lets
you chamfer with one hand. Steel blade
cutter sets at 21° angle for planing small
surfaces. 7" long. 15⁄ 8" steel blade. Made
in England.
9-37161★ — Wt. 1.9 lbs.
HAND TOOLS
MANUAL AND POWER STAPLERS, GLUE GUNS
Craftsman® Manual Staplers
4
Power Brad Nailers & Staplers
CRAFTSMAN PROFESSIONAL ELECTRIC BRAD
NAILER AND STAPLER. Heavy-duty 9-amp drive
1
2
coil quickly drives one fastener per second. Features
soft grip handle. 100-fastener capacity. Includes
carrying case. 8-foot 3-wire cord. UL listed. Imported.
5. CRAFTSMAN PROFESSIONAL
BRAD NAILER. Great for a variety
5
Craftsman
Professional
Brad Nailer
of wood working projects. Rapid-fire
nailer uses four sizes of T-head
brads - from 3⁄8" to 13⁄16".
9-27233★ — Wt. 9.0 lbs.
BRAD NAILS FOR 9-27233.
®
1. CRAFTSMAN PROFESSIONAL
FORWARD DRIVE STAPLER.
2. CRAFTSMAN® PROFESSIONAL
MANUAL STAPLE/ NAIL GUN. Drives 5
Applies pressure directly over work
surface for more efficient use. Features
taper spring that lessens kickback.
Consistent pressure provides more
stapling control. Built-in window shows
staples remaining. Features speed load
staple/nail track system, Rapid fire
option for repeated stapling. Durable
steel body has anti-slip comfort grip.
Also fires brad nails.
9-68515★ — Wt. 4.8 lbs.
staple sizes (1⁄4" thru 9⁄16") and 2 brad nail
sizes (1⁄2" and 5⁄8"). Easy-squeeze drive
requires less force. High/Low power
settings. Includes cable/screen attachment.
9-27227★ — Wt. 1.7 lbs.
3
BRAD NAILS for 9-27227, 9-68515 and
9-68496. Package of 500.
Catalog No. Length Wt. (lbs.)
9-68467★ 1⁄2"
0.2
9-68468★ 5⁄8"
0.2
18-gauge. Pkg. of 5000.
Catalog No. Length Wt. (lbs.)
9-27214★ 13⁄16"
3.2
9-27215★ 1"
3.0
3
9-27216★
⁄ 4"
2.9
3
9-27218★
⁄ 8"
2.0
6 Craftsman
Professional
Electric Stapler
6. CRAFTSMAN PROFESSIONAL
ELECTRIC STAPLER.
For heavy-duty stapling applications.
Rapid-fire stapler uses 3⁄16" wide
staples from 5⁄16" to 9⁄16" long.
9-27231★ — Wt. 7.7 lbs.
STAPLES FOR 9-27231. Made of
0.035 steel. 3⁄16" wide. Package of 5,000.
Catalog No. Length Wt. (lbs.)
9-27213★ 3⁄8"
1.2
9-27212★ 1⁄2"
1.5
9-27211★ 9⁄16"
1.7
3. CRAFTSMAN DUAL POWER
MANUAL STAPLER. Easy-squeeze
trigger reduces effort and hand fatigue.
High-Low setting for hard and soft
woods. Cushioned bumper. Window
shows staple size. Includes 3⁄8" staples.
9-68447★ — Wt. 1.8 lbs.
Variable Power Stapler/Nailer
7. CRAFTSMAN VARIABLE
POWER STAPLER/NAILER. Uses 5
Hammer Tacker
4
7
staple sizes, 2 brad nail sizes. Variable
power for penetration of hard materials;
lighter drive for soft or thin materials.
Easy to load base allows flush finishing
within 3⁄ 16" of vertical surfaces. Lexan®
plastic housing. UL listed. AC.
9-68496★ — Wt. 2.0 lbs.
Staples for Manual/Power Staple Guns
4. CRAFTSMAN® HAMMER
TACKER. Steel construction with thick
rubber grip to absorb shock. Drives
and 3⁄8" narrow crown staples.
9-68434★ — Wt. 2.1 lbs.
1⁄ 4", 5⁄ 16"
NARROW CROWN STAPLES for 9-68434
STAPLES. For Craftsman Professional Manual
Cat. No.
and 9-68515. Box/1000
Catalog No.
Size Wt. lbs.
9-74411★ 1⁄4"
0.3
9-74414★ 5⁄16"
0.3
9-74412★ 3⁄8"
0.4
Staple/Nail Gun (9-27227), Craftsman Variable
Power Stapler/Nailer (9-68496), Craftsman Dual
Power Manual Stapler (9-68447) and Craftsman
Heavy-Duty Single-Power Manual Stapler
(9-6846). 0.050 steel, 1⁄2" wide. Package of 5,000.
9-74452★ 1⁄4"
9-74453★ 5⁄16"
9-74722★ 3⁄8"
9-74456★ 1⁄2"
9-74457★ 9⁄16"
Craftsman® Riveters
8
8. CRAFTSMAN® INDUSTRIAL RIVETER. Sets 1⁄8", 3⁄16" and 5⁄32" aluminum
rivets and 1⁄8" stainless steel rivets. Die cast metal with comfort grip, cushioned
handle. Removable ejector spring for automatic mandrel removal. Includes
3⁄ 32", 1⁄ 8", 5⁄ 32", and 3⁄ 16" nosepieces.
9-74755★ — Wt. 1.2 lbs.
9. CRAFTSMAN® HEAVY-DUTY
RIVETER WITH RATCHETING
HEAD. Rugged die-cast aluminum.
9
Length Wt. (lbs.)
1.2
1.5
1.5
2.0
2.0
1⁄ 8"
DIAMETER RIVETS FOR RIVETERS
Cat. No.
Size
Pack
ALUMINUM RIVETS. Wt. 0.1 lbs.
Features head that rotates 360° for
9-74633★ 1⁄8" x 1⁄8" 100
use at any angle. Rubber grips provide 9-74634★ 1⁄8" x 1⁄4"
100
operating comfort and control. Includes STEEL RIVETS. Wt. 0.1 lbs.
4 nosepieces for setting rivet sizes,
9-74629★ 1⁄8" x 1⁄8"
30
3⁄ 32", 1⁄ 8", 5⁄ 32" and 3⁄ 16". Nose pieces
9-74630★ 1⁄8" x 1⁄4"
25
store in handle.
ASSORTMENT. Wt. 0.4 lbs.
9-74749★ — Wt. 1.8 lbs.
9-74637★ Asst.
120
187
4
HAND TOOLS
HAMMERS
10
1
Fiberglass
Handle
1. CRAFTSMAN HICKORY CURVED
CLAW HAMMER. Forged, high carbon steel
Hickory
Handle
head. Third Claw™ pulls nails in tight places.
Exclusive rib-reinforced claws. Headliner® steel
shield adds strength. Chevron grip for comfort.
Soft, non-marring handle cap. Head weight
16 oz., 13" handle.
9-38045★ — Wt. 1.4 lbs.
2. CRAFTSMAN HICKORY RIP CLAW
HAMMER. Special deep throat design.
Catalog
Number
Head
Face
Wt
9-38092★ Polish 16 oz.
9-38090★ Milled 20oz.
9-38098★ Milled 24oz.
3
Hdle
Lgth
13"
16"
17"
Wt.
lbs.
1.4
1.8
2.2
Rib-reinforced claws add strength. Synthetic rubber
grip has chevrons for comfort. Head weight 16 oz.,
13" handle.
9-38126★ — Wt. 1.6 lbs.
11. CRAFTSMAN FIBERGLASS RIP CLAW
HAMMER. Smooth contoured face. Special deep
throat design. Synthetic rubber grip has chevrons.
Catalog
Face
Head Handle Wt.
Number
Type
Wt Length (lbs.)
9-3821★ Polished 16 oz. 131⁄2" 1.6
9-38094★ Milled 20 oz. 16"
1.9
11
Headliner® steel shield adds strength; helps
reduce handle damage. Chevron grip for
comfort. Soft, non-marring handle cap for light
tapping. Best grade hickory handle.
2
10. CRAFTSMAN FIBERGLASS CURVED CLAW
HAMMER. Third Claw™ pulls nails in tight places.
12. CRAFTSMAN FULL OCTAGON FIBERGLASS
HAMMER. Full polished head with octagon neck and
face. Steel wedged, epoxy sealed eye. Slip resistant
grip, contoured for comfort. Head weight 20 oz.,
14" handle.
9-38129★ — Wt. 1.8 lbs.
12
3. CRAFTSMAN ADZE EYE CALIFORNIA
FRAMER. Has adze eye “headliner shield”
forged into head. Milled face. 17" hickory
handle with chevron grip and non marking tip.
23 oz. head.
9-38162★ — Wt. 2.0 lbs.
13
Steel
Handle
4. CRAFTSMAN CURVED CLAW
FINISHING HAMMER. Drop forged steel
4
head with polished face and bevel. Best grade
hickory handle. Head weight 7 oz., 111⁄2"
handle.
9-38128★ — Wt. 0.8 lbs.
5. CRAFTSMAN STRAIGHT CLAW
FINISHING HAMMER. Drop forged steel
hickory plug. Third Claw™ pulls nails in tight places.
Rib-reinforced claws add strength. Synthetic rubber
grip. Head weight 16 oz., 13" handle.
9-38125★ — Wt. 1.6 lbs.
14
15. CRAFTSMAN ALL STEEL RIP CLAW
HAMMER. Drop-forged steel head and handle.
Hickory plug in head absorbs shock. Special, deep
throat design for power strikes. Air cushioned, slip
resistant grip.
Catalog
Face
Head Handle Wt.
Number
Type
Weight Length (lbs.)
9-38095★ Polished 16 oz. 123⁄4" 1.7
9-38273★ Polished 20 oz.
14"
2.0
9-38283★ Polished 22 oz.
16"
2.2
9-38284★ Milled 22 oz.
16"
2.2
6. CRAFTSMAN MAGNETIC TACK
HAMMER. Head is drop forged steel, 41⁄4"
long. Magnetic face holds and sets tacks. Solid
driving face. Head 5 oz., 11" handle length.
9-38101★ — Wt. 0.4 lbs.
6
15
Hatchet
Hammers
7
7. CRAFTSMAN RIGBUILDER
HATCHET. Designed for heavy construction.
Polished head with extra-large milled face,
Blade has 31⁄2" cut and handy nail pulling slot.
Best grade hickory handle. Head weight 29
oz., 17" handle.
9-48286★ — Wt. 2.6 lbs.
16. CRAFTSMAN ALL STEEL CALIFORNIA
FRAMER HAMMER with Power plug shock
absorbing core. Large milled face. 17" handle.
9-38153★ — 19 oz. Head — Wt. 1.9 lbs.
9-38154★ — 23 oz. Head — Wt. 2.2 lbs.
16
Specialty Hammers
17. CRAFTSMAN BRICKLAYERS HAMMER.
Hardened and tempered, forged steel head with beveled
striking face. Polished face and bevel. Best grade
hickory handle.
Catalog
Head
Handle
Wt.
Number
Weight
Length
lbs.
9-38316★ 16 oz.
12"
1.4
9-38315★ 24 oz.
131⁄2"
2.3
8. CRAFTSMAN HALF HATCHET.
8
Polished, drop forged steel head. Blade has
31⁄2" cut and handy nail pulling slot. Best
grade hickory handle. Head weight 22 oz.,
13" handle.
9-48285★ — Wt. 1.6 lbs.
9. CRAFTSMAN SHINGLING HATCHET.
9
188
Drop forged polished steel head. Crowned
milled face. Nail slot and back blade. Three
hole gauge 41⁄2", 5" and 14.3 cm. Leather
thong. Protective blade guard. Hickory handle.
9-48281★ — Wt. 1.5 lbs.
plug in head absorbs shock. Third Claw™ pulls nails in
tight places. Rib-reinforced claws add strength. Aircushioned, slip resistant grip for comfort. Head weight
16 oz., 123⁄4" handle. Wt. 1.7 lbs.
9-38127★ — Black Grip
14. CRAFTSMAN TUBULAR CURVED CLAW
HAMMER. Tubular steel handle has shock absorbing
head with special deep throat design. Smooth
contoured face. Best grade hickory handle.
Head weight 10 oz., 11" handle .
9-38071★ — Wt. 1.2 lbs.
5
13. CRAFTSMAN ALL STEEL CURVED CLAW
HAMMER. Drop forged steel head and handle. Hickory
17
18
18. CHIPPING HAMMER. Forged alloy steel.
Vertical chisel on one end, tapered point on the other.
9-20368 — Wt. 0.9 lbs.
19. CHIPPING HAMMER with steel brush for slag
19
removal.
9-20037 — Wt. 1.3 lbs.
HAND TOOLS
HAMMERS
4
Ball Pein Hammers
1
1. CRAFTSMAN® HICKORY HANDLE BALL PEIN HAMMERS.
Cheeks ground smooth. Hickory handle. Finished in rust resistant black paint.
Catalog No.
Head Wt. Wt. (lbs.)
Catalog No.
Head Wt. Wt. (lbs.)
9-38461★
4 oz.
0.5
9-38465★
16 oz.
1.3
9-38463★
8 oz.
0.8
9-38466★
24 oz.
2.0
9-38464★
12 oz.
1.1
9-38467★
32 oz.
2.5
Plastic And Rubber Tipped Hammers
2. CRAFTSMAN® 24 OZ.
REPLACEABLE TIP NONMARRING RUBBER MALLET.
2
Comes with 1 white tip and 1 black tip.
Hickory handle.
9-38304★ — Wt. 2.3 lbs.
CRAFTSMAN RUBBER
REPLACEMENT TIPS
3. CRAFTSMAN® PLASTIC TIP HAMMER. Forged,
high carbon, quality steel head. Supplied with replaceable
tips, one soft red and one hard yellow. Hickory handle.
Catalog
Head
Handle
Wt.
Number
Weight
Length
(lbs.)
9-38298★
6 oz.
101⁄ 2"
0.8
9-38292★ 12 oz.
121⁄ 2"
1.2
3
®
for Rubber Mallet 9-38304. Wt. 0.3 lbs.
9-38305★ — White Tip
9-38306★ — Black Tip
CRAFTSMAN® REPLACEMENT TIPS FOR PLASTIC
TIP HAMMERS. Wt. 0.2 lbs.
9-38301★ — Hard — 6 oz.
9-38299★ — Soft — 6 oz.
9-38296★ — Hard — 12 oz.
9-38297★ — Soft — 12 oz.
Specialty Hammers
4. CRAFTSMAN HAND DRILLING
HAMMER. The right choice for striking cold
6. CRAFTSMAN®
BLACKSMITH HAMMER. Drop
chisels, punches, brick chisels. Drop forged head
with large, crowned striking face. 10" Hickory
handle. Head wt. 3 lbs.
9-38311★ — Wt. 3.5 lbs.
forged, steel head. Large polished,
crowned striking face. Beveled
face and ends. 15" Hickory handle.
Head wt 21⁄ 2 lbs.Wt. 3.0 lbs.
®
4
6
9-38262★
5. CRAFTSMAN® DOUBLE FACE
ENGINEERS HAMMER. Durable hardened and 7. CRAFTSMAN® RUBBER
tempered, drop forged steel head. Large crowned MALLET. Non-marring, natural
5
face and wide bevel. Heavy duty fiberglass handle
with overstrike guard. Slip resistant cushioned grip.
Catalog
Hdl.
Wt.
Number
Length
(lbs.)
9-38261★
15"
4.2
9-38309★
9"
3.4
rubber head resists oil and water.
Shock absorbent 13" hickory handle.
Head wt 16 oz. Wt. 1.4 lbs.
9-45787★
7
Hammer Sets
8
8. CRAFTSMAN® 3-PC.
HAMMER SET. Includes 9-38292,
9-38465, 9-38466.
9-38459★ — Wt. 4.7 lbs.
9. CRAFTSMAN® 5-PC.
HAMMER SET. Includes 9-38292,
9
9-38464, 9-38465, 9-38466, 938467.
9-38074★ — Wt. 8.5 lbs.
189
4
HAND TOOLS
BRUSHES, FILES, FILE SETS
Craftsman® Specialty Brushes
1
5
3
2
4
1. CRAFTSMAN® TOOTHBRUSH STYLE.
x 77⁄8". Curved handle. Wt. 0.1 lbs.
9-3666★ — Stainless Steel
9-3664★ — Crimped Brass
9-3665★ — Brass
6
1⁄ 2"
2. CRAFTSMAN CURVED HANDLE
WIRE BRUSH. 133⁄4" long. Wt. 0.4 lbs.
9-3668★ — without scraper
9-36471★ — with scraper
3. CRAFTSMAN® HEAVY DUTY WIRE
BRUSH WITH SCRAPER. 11" long.
9-3647★ — Wt. 0.5 lbs.
5. CRAFTSMAN BENCH DUSTER.
4. CRAFTSMAN® SHOEHANDLE WIRE
BRUSH. without scraper. 10" long.
9-3669★ — Wt. 0.1 lbs.
6. CRAFTSMAN PARTS CLEANING
BRUSH removes grease and dirt.
9-41802★ — Wt. 0.3 lbs.
100% Horsehair.
9-3667★ — Wt. 0.7 lbs.
®
5
Craftsman® Files
EXTRA SLIM TAPER FILES.
9-31253★ — 4" — 0.1 lbs.
CRAFTSMAN® FILES AND RASPS. Each
file is packed in a protective plastic pouch.
Made in USA.
DOUBLE EXTRA SLIM TAPER FILE
9-31271★ — 6" — 0.1 lbs.
9-31252★ — 7" — 0.1 lbs.
MILL FILES. Used as general purpose file.
Medium coarse, single cut. Tapered in width.
9-31265★ — 6" — 0.1 lbs.
9-31263★ — 8" — 0.2 lbs.
9-31264★ — 10" — 0.4 lbs.
FLAT BASTARD FILE
9-31282★ — 8" — 0.2 lbs.
9-31257★ — 10" — 0.4 lbs.
HALF ROUND BASTARD FILES. Used for
filing out concave surfaces and crevices, and
for rounding out holes. Medium coarse,
double cut for fast heavy cutting.
9-31277★ — 8" — 0.2 lbs.
9-31251★ — 10" — 0.4 lbs.
5. CRAFTSMAN® 25-PC. FILE SET.
®
Craftsman
File Sets
Includes 8", 10" shoe rasp; 5" tungsten point;
6", 8", 10" and 12" bastard cut mill files; 8",
12" bastard cut flat files; 6", 8" and 10"
bastard cut round files; 10" flat Multi-Kut; 6"
and 7" slim taper; 6" double extra-slim taper;
10" all purpose file; 6 pc. needle file set.
9-31233★ — Wt. 6.3 lbs.
CRAFTSMAN® 17-PC. FILE SET (not
shown). Includes 8" shoe rasp; 5" tungsten
point; 8" and 12" bastard cut mill files; 10"
bastard cut flat file;10" bastard cut half round
file; 8" bastard cut round file; 10" flat MultiKut; 6" and 7" slim taper; 6" double extra-slim
taper; 6 pc. needle file set.
9-31232★ — Wt. 3.6 lbs.
SLIM TAPER FILES.
9-31274★ — 6" — 0.1 lbs.
9-31285★ — 7" — 0.1 lbs.
Craftsman®
Handled Files
CRAFTSMAN® HANDLED FILES.
Permanently attached handles to provide a
sure grip and maximum control.
8
6. CRAFTSMAN® 14-PC. FILE SET.
6
7
Includes 8" and 10" shoe rasps; 8" and 10"
bastard cut mill files; 8" and 10" bastard cut
flat files; 8" and 10" bastard cut half-round
files; 8" bastard cut round file; 7" taper file; 4"
and 6" x-tra slim taper files; 7" double x-tra
slim taper file; 6" round chain saw file.
9-31228★ — Wt. 3.5 lbs.
7. CRAFTSMAN® 6-PC. NEEDLE FILE
SET. 51⁄2" single cut files in assorted shapes.
9-6757★ — Wt. 0.1 lbs.
190
CRAFTSMAN® SHOE RASPS.
9-31211★ — 8" — 0.4 lbs.
9-31286★ — 10" — 0.6 lbs.
CRAFTSMAN® 7" ROTARY MOWER
AND GARDEN TOOL FILE (not shown).
9-31279★ — 0.1 lbs.
IGNITION FILE (not shown).
9-31205★ — 0.1 lbs.
CRAFTSMAN® INDIVIDUAL FILES WITH
HANDLE.
Cat. No.
9-31300★
9-31302★
9-31303★
9-31310★
9-31311★
9-31312★
Size
Type Wt. (lbs.)
6"
Mill
0.2
6"
Round
0.1
7" Slim Taper 0.3
8"
Mill
0.2
8" Half Round 0.4
8"
Round
0.2
CRAFTSMAN® 5-PC. FILE SET (not shown).
Includes 9-31211, 9-31303, 9-31310, 9-31311,
9-31312.
9-31323★ — Wt. 1.8 lbs.
CRAFTSMAN® 3-PC. FILE SET (not shown).
Includes 9-31310, 9-31311, 9-31312.
9-31321★ — Wt. 1.1 lbs.
8. CRAFTSMAN® 7-PC. FILE SET
(shown). Includes 9-31211, 9-31300,
9-31302, 9-31303, 9-31310, 9-31311,
9-31312.
9-31227★ — Wt. 2.3 lbs.
9
9. SEARS ROUND SHAPING FILE.
9" round file type with hardwood handle, 5⁄ 8"
diameter blade. Imported.
9-37743 — Wt. 0.4 lbs.
HAND TOOLS
LEVELS
4
Craftsman® Smart Tool Plus
1. CRAFTSMAN® SMARTTOOL PLUS. Digital level with
Craftsman Advantage angle copy mode. Beeps at any preset
angle. Digitally displays degrees, percent of slope and pitch
(rise and run) to 1⁄10° accuracy. Solid acrylic block vials.
Push button calibration. Includes 9-volt alkaline battery.
Catalog No.
Length Wt. (lbs.)
9-39756★
61⁄2"
0.8
9-39758★
24"
1.5
9-39757★
48"
2.5
1
2
3. HEAVY-DUTY ALUMINUM
LEVELS. Made of solid aluminum
I-beam construction. Special pitch
vial reads from level to 1⁄2" per foot
pitch in 1⁄8" increments. Protected
acrylic vials. Shock absorbing
rubber end caps protect frame. Top
read windows simplify tool use. Vgroove edge for use on pipe.
Models 9-39897 and 9-39898 are
warranted by Sears.
CRAFTSMAN® 24" LEVEL. 1 vial plumb,
1 vial level, 1 vial pitch.
9-39897★ — Wt. 1.3 lbs.
2. CRAFTSMAN® SMART LASER PLUS.
24" Digital level/laser combination with exclusive
Craftsman Advantage angle copy mode. All of the
features of the Craftsman® Smart Tool Plus, with
the addition of a high visibility red laser for long
distance work. For indoor/outdoor use. Includes
9-volt alkaline battery, 2 AAA batteries and a
rugged padded nylon protective carrying case.
9-39755★ — Wt. 2.9 lbs.
Craftsman® Heavy Duty Levels
3
CRAFTSMAN® 48" LEVEL. 2 vials plumb,
1 vial level, 1 vial pitch.
9-39898★ — Wt. 2.4 lbs.
4. CRAFTSMAN® 48" CASE FOR LEVELS.
4
Polyethylene. Twist snap case top. Drainage
holes.
9-39914★ — Wt. 1.5 lbs.
5. CRAFTSMAN® 9" TORPEDO LEVEL. Aluminum
I-beam frame with 1 magnetic, 1 v-grooved edge.
9-39829★ — Wt. 0.4 lbs.
®
Craftsman Torpedo
and Pocket Levels
6
6. CRAFTSMAN® 9" INSPECTORS TORPEDO
with pitch vial measures from level to 1⁄4" per foot.
Top reading. Aluminum. Bright Yellow.
9-39882★ — Wt. 0.4 lbs.
5
7. CRAFTSMAN® 5" POCKET LEVEL
7
Specialty Levels
has top-read vial.
9-3971★ —Wt. 0.1 lbs.
8
8. CRAFTSMAN® LINE LEVEL SET. Includes
9
standard line and pitch line level.
9-39894★ —Wt. 0.2 lbs.
9. SOLID BRASS PLUMB BOB. Meets
Government Specs GGG-P-501E.
Catalog No. Size Wt. lbs.
9-40105★ 24 oz.
1.6
9-40104★ 16 oz.
1.2
10
12
13
10. CRAFTSMAN® UNIVERSAL
PROTRACTOR. Magnetic back and base.
12. CRAFTSMAN® CHALK LINE
PLUMB BOB. Has combination refill cap
90° angle fits corners for 2 way readings.
Two movable indicators rotate 360°. Made
in USA.
9-39830★ — Wt. 0.4 lbs.
and plumb bob tip. Fold away handle. 100
ft. long. Mechanical brake holds line taut;
releases automatically on rewinding.
9-37734★ — Wt. 0.4 lbs.
11. CRAFTSMAN® UNIVERSAL
PROTRACTOR. Magnetic back and base
13. CRAFTSMAN® MARKING CHALK.
attaches to steel squares or door jambs.
Exclusive 90° angle fits corners for two-way
readings. Two movable indicators rotate
360° for comparison readings. Pendulum
indicator allows for easy readings.
Measures or repeats angles with ± 0.5°
accuracy. Made in USA.
9-39840★ — Wt. .4 lbs.
11
Comes in 8 oz. plastic squeeze bottle. Blue.
9-37587★ — Wt. 0.5 lbs.
Specialty Levels
14. CRAFTSMAN® LASER TORPEDO LEVEL. Built-in leveling base, swing-out
leveling feet, adjustable leveling screw. Laser reference ridge on side of unit. Two
precision vials: one level and one circular plumb. Provides 1⁄4" @ 50' accuracy
horizontal, 1⁄4" @ 20' accuracy vertical. 100' working range.
Die-cast aluminum base.
9-48045★ — Wt. 1.1 lbs.
14
191
4
HAND TOOLS
TAPE MEASURES
Tape Measures
CRAFTSMAN® LOCKING TAPE MEASURES.
Polycarbonate ABS case. Extra-rigid 3 colored steel
blade is acrylic-coated. Stud and truss markings.
Tough-tip® blade protector. Blade lock and extra large
removable belt clip.
Key Cat No.
Size
Wt. (lbs)
1
9-39676★ 1" x 30'
1.3
2
9-39675★ 1" x 8M/26' 1.0
3
9-39674★ 1" x 25'
1.0
4
9-39697★ 3⁄4" x 20'
0.4
5
9-39698★ 1⁄2" x 12'
0.3
1
5
4
3
2
Craftsman Replacement Blades
6
6. CRAFTSMAN® 1 X 25' BOTTOM
LOCK TAPE MEASURE.
9-39678★ — Wt. 1.0 lbs.
Craftsman® replacement blades for locking tapes.
Fit Craftsman, Companion, Sears and other brands.
Replace with same size as original. Includes
illustrated step-by-step instruction sheet.
Cat No.
Size Wt. (lbs)
9-39520★ 1" x 30' 0.6
9-39523★ 1" x 25' 0.5
9-39524★ 1" x 8m/26' 0.5
9-39522★ 3/4" x 20' 0.3
9-39521★ 1/2" x 12' 0.2
Craftsman® Winding Tapes
Craftsman® Wood
Folding Rules
8
9
7
7. CRAFTSMAN® WOOD FOLDING RULES. 5⁄8" x 6'.
1⁄ 16"
graduations imbedded in slats. Wt. 0.3 lbs.
9-39310★ — Outside Read, no extension
9-39311★ — Inside Read, 6" brass extension
192
8. CRAFTSMAN® STEEL TAPE MEASURE.
9. SEARS® OPEN REEL TAPE. Fiberglass tape is moisture
3⁄ 8"
resistant and non-conductive. Blade is PVC coated stainless
steel and hook fits over edges or slips on nail. Heavy duty
ABS plastic frame. Closed housing helps protect tape from
damage. Extra long handle for easy rewinding. Yellow.
9-39317★ — 1⁄2" x 100' — Wt. 1.4 lbs.
9-39318★ — 1⁄2" x 200' — Wt. 2.3 lbs.
wide and 100 ft. long. Double roller
mouthpiece, leatherette vinyl clad steel case.
9-39002★ — Wt. 1.1 lbs.
REPLACEMENT BLADE for 9-39002.
9-39032★ — Wt. 0.8 lbs.