Made in Italy

Made in Italy
2016
The industry first steering wheel to use a fixed keyboard system to prevent keyboards from turning
together with the steering wheel (patented technology: PCT/IB2015/052111 ).
The functions which can be controlled directly from the steering wheel are limitless: every command can "migrate" from its current position directly to the keypads integrated into the steering
wheel.
The system is designed to connect to any CAN - RS485 - RS232, digital I/O, and is geared for further
expansion depending on the customer’s specific needs.
Our patented system guarantees multiple innovations at the same time:
4
•
It allows the steering wheel to turn while keeping the keyboard in a fixed position, making it
possible for the pilot to interact with the buttons quickly, practically and safely and keeping
them from turning together with the steering wheel.
•
It enable users to connect the steering wheel and the boat using a CAN/BUS cable. As it
does not require a wireless connection, it ensures the arrival of extremely secure and reliable electrical signals from the steering wheel itself, making it possible to control sensitive
functions, such as motor speed and cruise control, as well as trim control, radio, flaps, ballasts, and all those functions whose controls are currently located on the dashboard of the
boat.
•
The keyboards are directly connected to the battery of the boat and therefore they will
never run out of charge, unlike independent keyboards using wireless connections.
ISM
The ergonomically-designed ISOTTA sport paddles allow precise and rapid control of your engine trim,
jackplate, cruise control, or whatever you wish to directly control from steering wheel.
Paddles are activated by pulling a paddle for a more sporty feeling experience.
The ISOTTA sport Paddles will add more fun, value and performance to your boat.
Easy to fit, suitable for most of the ISOTTA steering wheels.
Available in different color solutions.
6
PADDLE
7
WOLFE
WOLFE BF
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather with polished inserts.
SPOKES:
Equal spokes in stainless steel 316.
CENTRAL
FLANGES:
stainless steel 316 polished
(or black anodized).
CENTER
CAP:
OPTIONS:
Genuine leather or vinyl leather .
Center cap with custom logo
embossed.
ISOTTA
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
8
1116_5
COPER
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal spokes in aluminium anodized. Back side in leather or vinyl leather
CENTRAL
CENTER
FLANGES:
CAP:
OPTIONS:
ISOTTA
Black anodized aluminium and inner silver aluminium.
Genuine leather or vinyl leather .
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
1115_5
9
PACHU
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal spokes in stainless steel 316 polished.
CENTRAL
CENTER
FLANGES:
CAP:
OPTIONS:
INTEGRATED
Genuine leather or vinyl leather .
Center cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
10
Stainless steel 316 polished.
1106_5
DAPONTE
DIAMETER:
ø 355mm – 14"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal spokes in stainless steel 316 polished.
Back side in leather or vinyl leather.
CENTRAL
CENTER
FLANGES:
CAP:
OPTIONS:
ISOTTA
Stainless steel 316 polished.
Genuine leather or vinyl leather .
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
1105_5
VCE INOX
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal spokes in Stainless steel 316 polished.
CENTRAL
CENTER
FLANGES:
CAP:
OPTIONS:
ISOTTA
Genuine leather or vinyl leather .
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
12
Stainless steel 316 polished.
114_5
DIAMA
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
HUB ADAPTER REQUIRED FOR FITTING
Equal spokes in Stainless steel 316 polished.
CENTRAL
CENTER
ISOTTA
FLANGES:
CAP:
OPTIONS:
Stainless steel 316 polished (or leather).
• Ref. Code:
188_5
mod. DIAMA
Genuine leather or vinyl leather .
• Ref. Code:
188_5FL mod. DIAMA FL
Center cap with custom logo embossed.
DIAMA FL
13
BERRA SP
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal spokes in stainless steel SS316 polished.
CENTRAL
CENTER
CAP:
OPTIONS:
ISOTTA
FLANGE:
Aluminium, silver anodized.
Brushed aluminium or genuine/vinyl leather.
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code: 189_5_SP
14
BERRA CM
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Stainless steel SS316 polished.
CENTRAL
CENTER
CAP:
OPTIONS:
ISOTTA
FLANGE:
Black anodized aluminium and inner silver ring.
aluminium embossed.
Center cap with custom logo.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code: 189_5_CM
15
CARLOTTA
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal double-spokes in stainless steel SS316.
CENTRAL
FLANGE:
Stainless steel SS316 polished.
CENTRAL
CAP:
Genuine leather or vinyl leather.
OPTIONS:
Central cap with custom logo embossed.
Central flange in leather.
INTEGRATED
HUB ADAPTER
• Ref. Code:
16
3/4"
140_5_ST
TAPER REQUIRED FOR FITTING
CARLOTTA SATIN
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Stainless steel 316 satin/mat finishing.
CENTRAL
FLANGE:
Stainless steel 316 satin/mat finishing.
CENTRAL
CAP:
Genuine leather or vinyl leather.
OPTIONS:
INTEGRATED
Central cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
1107_5
17
TIVOLI ST
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather. Elliptic section.
SPOKES:
Equal spokes in stainless steel 316 polished.
CENTRAL
FLANGE:
CENTRAL
CAP:
OPTIONS:
INTEGRATED
Genuine leather or vinyl leather.
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
18
Stainless steel 316 polished.
196_5
TIVOLI SAT
DIAMETER:
ø 350 mm – 13.80"
GRIP:
Genuine leather or vinyl leather. Elliptic section.
SPOKES:
Stainless steel 316 polished/mat finishing.
CENTRAL
FLANGE:
CENTRAL
CAP:
OPTIONS:
INTEGRATED
Stainless steel 316 polished/mat finishing.
Genuine leather or vinyl leather.
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
1112_5
19
MEDEA
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal spokes in stainless steel 316 polished.
STUD:
Special stud in stainless steel 316 polished.
CENTRAL
INNER
FLANGES:
RING:
CENTER
Stainless steel 316 polished.
CAP:
OPTIONS:
INTEGRATED
Genuine leather or vinyl leather .
Center cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
20
Genuine leather or vinyl leather.
1103_5
ROVERETO
DIAMETER:
ø 360mm - 14.20"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Double equal spokes in stainless steel 316 polished.
CENTRAL
INNER
FLANGES:
RING:
CENTER
CAP:
OPTIONS:
Aluminium, powder coated.
Stainless steel polished.
Genuine leather or vinyl leather .
Center cap with custom logo embossed.
HUB ADAPTOR REQUIRED FOR FITTING
• Ref. Code:
178_6
21
CORSARO
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
With or without six chromed rings.
SPOKES:
Aluminium, silver anodized.
CENTRAL
CENTER
FLANGE:
CAP:
OPTIONS:
INTEGRATED
Aluminium, silver anodized (or black)
Genuine leather or vinyl leather .
Center cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
1104_5
1104_5_6R
CORSARO 6R
22
MLB
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather.
SPOKES:
Titanium or silver aluminium with leather on the bottom.
STUD:
Special stud in stainless steel 316 polished.
CENTRAL
CENTER
FLANGES:
CAP:
OPTIONS:
ISOTTA
Black anodized aluminium.
Aluminium embossed.
Center cap with custom logo.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
1109_5
23
REX
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Double equal spokes in stainless
steel 316 polished.
CENTRAL
INNER
FLANGE:
RING:
CENTER
Aluminium, black anodized.
Aluminium, silver anodized.
CAP:
OPTIONS:
Genuine leather or vinyl leather.
Center cap with custom logo
embossed.
INTEGRATED
HUB ADAPTER
• Ref. Code:
24
199_5
MEDELANA
DIAMETER:
ø 360mm - 14.18"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Equal spokes in stainless steel 316
polished.
CENTRAL
INNER
FLANGE:
Powder coated or leather.
RING:
CENTER
Stainless steel 316 polished.
CAP:
Genuine leather or vinyl leather.
OPTIONS:
Center cap with custom logo
embossed. Central flange in genuine
or vinyl leather.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
177_6
25
MESOLA
DIAMETER:
ø 350mm - 13.80"
GRIP:
GRIP
Genuine leather or vinyl leather.
RING:
Stainless steel 316 polished.
SPOKES:
Equal double-spokes in stainless steel 316
polished.
CENTRAL
INNER
FLANGE:
Genuine leather or vinyl leather.
RING:
CENTER
Stainless steel 316 polished.
CAP:
Genuine leather or vinyl leather.
OPTIONS:
ISOTTA
HUB ADAPTER
• Ref. Code:
26
Central cap with custom logo embossed.
3/4" TAPER
179_5
REQUIRED FOR FITTING
IDRA
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Single poke in stainless steel 316 polished. Back side in leather or vinyl leather
CENTRAL
INNER
FLANGE:
Painted or genuine leather.
RING:
CENTER
Stainless steel 316 polished.
CAP:
Genuine leather or vinyl leather.
OPTIONS:
ISOTTA
Central cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
186_5
27
CELLINI ST
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
4 spokes at 90° in stainless steel 316
polished. Back side in leather or vinyl
leather.
CENTRAL
INNER
FLANGE:
RING:
CENTER
CAP:
Stainless steel 316 polished.
Genuine leather or vinyl leather.
OPTIONS:
Central cap with custom logo embossed.
ISOTTA
3/4" TAPER
HUB ADAPTER
• Ref. Code:
28
Genuine leather or vinyl leather.
147_5
REQUIRED FOR FITTING
FERRARA 2
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl
leather.
SPOKES:
2 pairs 180° spokes in
stainless steel 316
polished. Back side in
leather or vinyl leather.
CENTRAL
FLANGE:
Genuine leather or vinyl
leather.
INNER
RING:
Stainless steel 316
polished.
CENTER
CAP:
Genuine leather or vinyl
leather.
OPTIONS:
Central cap with custom
logo embossed.
Central flange powder
coated.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
171_5
FERRARA 3
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl
leather.
SPOKES:
3 pairs equal spokes in
stainless steel 316 polished.
Back side in leather or vinyl
leather.
CENTRAL
FLANGE:
Genuine leather or vinyl
leather.
INNER
RING:
CENTER
CAP:
Stainless steel 316 polished.
Genuine leather or vinyl
leather.
OPTIONS:
Central cap with custom
logo embossed.
Central flange powder
coated.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
170_5
29
RATIO
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Double equal spokes in stainless steel 316 polished.
CENTRAL
INNER
FLANGE:
RING:
CENTER
Aluminium, silver anodized.
CAP:
OPTIONS:
INTEGRATED
Genuine leather or vinyl leather.
Central cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
30
Aluminium, black anodized.
1100_5
PRESTIGIO SS
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
VERTICAL
SPOKES:
HORIZONTAL
INNER
Stainless steel 316 polished.
SPOKES:
RING:
CENTER
stainless steel 316 polished..
CAP:
Genuine leather or vinyl leather.
OPTIONS:
ISOTTA
Central cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
Satin and anodized aluminium..
3/4" TAPER
REQUIRED FOR FITTING
155_5_SS
31
VERTICE Wood
DIAMETER:
ø 350mm - 13.80"
GRIP:
Wood.
SPOKES:
3 equal spokes in anodized
alumininium.
CENTRAL
CENTER
FLANGE:
Anodized aluminium.
CAP:
Genuine leather or vinyl leather.
OPTIONS:
Central cap with custom logo
embossed. Spokes in chrome plate
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
143_5_RW
VERTICE Leather
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
3 equal spokes in anodized
alumininium.
CENTRAL
CENTER
FLANGE:
Anodized aluminium.
CAP:
Genuine leather or vinyl leather.
OPTIONS:
Central cap with custom logo
embossed.
ISOTTA
HUB ADAPTER
• Ref. Code:
32
3/4" TAPER
143_5
REQUIRED FOR FITTING
VERTICE 6R
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather with 6 chromed rings.
SPOKES:
3 equal spokes in anodized aluminium.
CENTRAL
CENTER
FLANGE:
Anodized aluminium..
CAP:
Genuine leather or vinyl leather.
OPTIONS:
ISOTTA
Central cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
143_5_6R
33
VALLELUNGA
DIAMETER:
ø 345mm - 13.58" - Flat bottom
shape.
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Anodized alumininium.
Vertical sticks in stainless steel 316
polished.
CENTRAL
FLANGE:
Anodized aluminium, smokey
grey finishing.
CENTRAL
RING:
OPTIONS:
Polished aluminium.
Central cap with custom
serigraphy logo.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
126_4
ZULAG
DIAMETER:
ø 345mm - 13.58"
GRIP:
Genuine leather or vinyl leather.
SPOKES:
Satin and anodized alumininium.
Inner portion in SS316 polished.
CENTRAL
INNER
FLANGE:
RING:
CENTRAL
CAP:
OPTIONS:
Anodized aluminium.
Stainless steel 316 polished.
Aluminium disk.
Central cap with custom
serigraphy logo.
ISOTTA
HUB ADAPTER
• Ref. Code:
34
3/4" TAPER
134_4
REQUIRED FOR FITTING
BORGIA
DIAMETER:
ø 360mm - 14.18"
GRIP:
Genuine leather.
SPOKES:
Parallel spokes in stainless steel 316
polished. Back side in leather or vinyl
leather.
CENTRAL
FLANGE:
Stainless steel 316 polished.
CENTRAL
CAP:
Genuine leather or vinyl leather.
OPTIONS:
ISOTTA
HUB ADAPTER
• Ref. Code:
Central cap with custom logo embossed.
3/4" TAPER
REQUIRED FOR FITTING
181_6
HORIZON
DIAMETER:
ø 360mm - 14.18"
GRIP:
Vinyl leather.
SPOKES:
5 elliptical spokes in brushed and
anodized aluminium.
CENTRAL
HUB:
Stainless.
CENTRAL
CAP:
Vinyl leather.
OPTIONS:
Central cap with custom logo
embossed.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
176_5S
35
OCEANO
DIAMETER:
ø 350mm - 13.80"
GRIP:
Genuine leather or vinyl leather or
leather with wood.
SPOKES:
Equal spokes in brushed/anodized
aluminium.
DOUBLE
INNER
CENTRAL FLANGE:
RING:
CENTRAL
CAP:
OPTIONS:
Brushed/anodized aluminium.
Leather or vinyl leather or wood.
Aluminium disk.
Central cap with custom serigraphy
logo.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
145_5
145_5_LW
OCEANO LW
36
HORIZON 500
DIAMETER:
ø 500mm - 19.70"
GRIP:
Genuine leather.
SPOKES:
5 elliptical spokes in brushed/
anodized aluminium.
CENTRAL HUB:
CENTRAL
CAP:
OPTIONS:
Stainless steel 316 polished.
Leather.
Central cap with custom logo
embossed.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
176_500
ITACA
DIAMETER:
ø 410mm - 16.14"
GRIP:
Genuine leather or vinyl lea-
ther.
SPOKES:
5 pair brushed and anodized
spokes.
CENTRAL FLANGE:
Brushed and anodized
aluminium.
CENTRAL
CAP:
Genuine leather or vinyl
leather.
OPTIONS:
Central cap with custom logo
embossed.
ISOTTA
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
175_40
37
ARIA Painted
DIAMETER:
ø 350mm - 13.80"
GRIP:
Powder coated metallic finishing.
SPOKES:
3 equal spokes in satin anodized aluminium.
CENTRAL
CENTER
FLANGE:
Satin and anodized aluminium.
CAP:
Powder coated metallic finishing.
OPTIONS:
ISOTTA
HUB ADAPTER
• Ref. Code:
38
Center cap with custom serigraphy logo .
3/4" TAPER
162_5
REQUIRED FOR FITTING
CORSARO 380
DIAMETER:
ø 380mm - 15"
GRIP:
Urethane, leather look.
3 inserts with various colors or finishing.
SPOKES:
Aluminium, silver anodized.
CENTRAL
CENTER
FLANGE:
CAP:
OPTIONS:
INTEGRATED
Aluminium, black anodized (or silver).
Silver brushed aluminium or genuine/vinyl leather.
Center cap with custom logo embossed.
HUB ADAPTER
• Ref. Code:
1104_8
39
CESCA
DIAMETER:
ø 350mm - 13.80"
GRIP:
Poliurethan leather look OR genuine/vinyl leather.
(model CESCA INS with 3 ABS inserts, various colors).
SPOKES:
CENTRAL
3 equal spokes in stainless steel 316 polished.
CAP:
OPTIONS:
INTEGRATED
Leather OR vinyl leather.
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
184_5 mod. CESCA
187_5 mod. CESCA INS
CESCA INS
40
VTR14
DIAMETER:
ø 350mm - 13.80"
GRIP:
Poliurethan leather look.
SPOKES:
Satin silver aluminium.
CENTRAL
FLANGE:
Aluminium powder costed.
CENTRAL
CAP:
Silver brushed aluminium.
OPTIONS:
ISOTTA
Center cap with custom logo.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
1113_5PUN
41
ARGO
DIAMETER:
ø 350mm - 13.80"
GRIP:
Poliurethan, leather look. Elliptic section.
SPOKES:
Double equal spokes in satin silver aluminium.
CENTRAL
FLANGE:
Aluminium, black anodized.
CENTRAL
CAP:
Aluminium disk.
OPTIONS:
INTEGRATED
Center cap with custom serigraphy logo.
HUB ADAPTER
• Ref. Code:
42
197_5
RUNZI
DIAMETER:
ø 350mm - 13.80"
GRIP:
Poliurethan, leather look. Elliptic section.
SPOKES:
5 equal spokes in satin silver aluminium.
CENTRAL
FLANGE:
Aluminium, black anodized.
CENTRAL
CAP:
Aluminium disk.
OPTIONS:
INTEGRATED
Center cap with custom serigraphy logo.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
194_5
43
FIUME INS
DIAMETER:
ø 350mm - 13.80"
GRIP:
Poliurethan, leather look. (Option: 3 insert with selected colors or finishing)
SPOKES:
Anodized aluminium.
CENTRAL
FLANGE:
CENTRAL
CAP:
OPTIONS:
INTEGRATED
Brushed/anodized aluminium.
Vinyl leather.
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
185_5_INS
185_5
FIUME
44
SKEMA
DIAMETER:
ø 350mm - 13.80"
GRIP:
Poliurethan, leather look.
(model SKEMA INS with 2 ABS inserts,
INTEGRATED
HUB ADAPTER REQUIRED FOR FITTING
various colors)
SPOKES:
Brushed/anodized silver aluminium.
• Ref. Code:
191_5
mod. SKEMA
mod. SKEMA 2
CENTRAL
RING:
Anodized silver aluminium.
191_5_2
CENTRAL
CAP:
Vinyl leather or aluminium disk.
191_5_INS mod. SKEMA 2
OPTIONS:
Center cap with custom logo embossed.
SKEMA INS
SKEMA 2
45
R-EVO
DIAMETER:
ø 350mm - 13.80"
GRIP:
Poliurethane, leather look with leather finger rest.
SPOKES:
Brushed/anodized aluminium.
CENTRAL
RING:
Mirror polished aluminium.
CENTRAL
CAP:
Aluminium disk.
OPTIONS:
ISOTTA
Custom serigraphy logo.
HUB ADAPTER
• Ref. Code:
3/4" TAPER
REQUIRED FOR FITTING
125_5_PNF
EVO 330
DIAMETER:
ø 330mm - 13.00"
GRIP:
Poliurethane, leather look.
SPOKES:
Brushed/anodized aluminium.
CENTRAL
RING:
CENTRAL
CAP:
Mirror polished aluminium.
Aluminium disk.
OPTIONS:
ISOTTA
HUB ADAPTER
• Ref. Code:
46
Custom serigraphy logo.
3/4" TAPER
REQUIRED FOR FITTING
121_3_PNFM
MARLIN
DIAMETER:
GRIP AND
CENTRAL
ø 350mm - 13.80"
SPOKES:
CAP:
OPTIONS:
ISOTTA
Stainless steel 316 polished.
Vinyl fabric or urethane.
Center cap with custom logo embossed.
HUB ADAPTER REQUIRED FOR FITTING
• Ref. Code:
183_5
47
printed 11/2015
IFRA SRL
tel. +39 0425 762060 • fax +39 0425 762648 • [email protected] • www.isotta.com