SIZE TABLES Wood and Aluminum-Clad Exterior Single- and

Architect Series®
Designer Series ®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Exterior
HUNG
Single- and Double-Hung
OPENING DIMENSIONS
CLAD EXTERIOR UNITS:
Dimensions shown in tables are rough opening dimensions.
WOOD EXTERIOR UNITS:
Use frame dimension plus dimensions below. This dimension
includes the use of stardard 1-1/8" wood subsill.
FRAME
ROUGH
MASONRY
BRICKMOULD
Width
Height
Width
Height
STD
+ 3/4"
+1-7/8"
+ 3-1/8"
+ 3-1/8"
3-1/2"
+ 3/4"
+1-7/8"
+ 6-3/8"
+ 4-3/4"
For clad and wood units with HurricaneShield® impactresistant glass, see the product installation instructions or
refer to local building code requirements.
Egress Notes:
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 . Check all applicable local codes for emergency egress requirements.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 . Check all applicable local codes for emergency egress requirements.
See Design Data pages in this section for clear opening dimensions.
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-22
Architect Series®
Designer Series®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Exterior
Single- and Double-Hung
HUNG
OPENING DIMENSIONS
CLAD EXTERIOR UNITS:
Dimensions shown in tables are rough opening dimensions.
WOOD EXTERIOR UNITS:
Use frame dimension plus dimensions below. This dimension
includes the use of stardard 1-1/8" wood subsill.
FRAME
ROUGH
MASONRY
BRICKMOULD
Width
Height
Width
Height
STD
+ 3/4"
+1-7/8"
+ 3-1/8"
+ 3-1/8"
3-1/2"
+ 3/4"
+1-7/8"
+ 6-3/8"
+ 4-3/4"
For clad and wood units with HurricaneShield® impactresistant glass, see the product installation instructions or
refer to local building code requirements.
Egress Notes:
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 . Check all applicable local codes for emergency egress requirements.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 . Check all applicable local codes for emergency egress requirements.
See Design Data pages in this section for clear opening dimensions.
SPECIAL SIZE FRAME DIMENSIONS*
SASH CONFIGURATION
VENT-EQUAL
COTTAGE
FIXED
SASH GLASS RATIO TOP % : BOTTOM %
50 : 50
40 : 60
NA
SHORTEST UNIT FRAME SIZE
24-3/8" (889)
42-1/4" (1 073)
17" (432)
TALLEST UNIT FRAME SIZE
96" (2 438)
81" (2 057)
71" (1 803)
UNIT FRAME WIDTH RANGE
14" to 48"
21" to 48"
17" to 59"
(533 to 1 219)
(533 to 1 219)
(432 to 1 499)
* Available within size range shown.
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-23
Architect Series®
Designer Series ®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Wood
Single- and Double-Hung
HUNG
OPENING DIMENSIONS
CLAD EXTERIOR UNITS:
Dimensions shown in tables are rough opening dimensions.
WOOD EXTERIOR UNITS:
Use frame dimension plus dimensions below. This dimension
includes the use of stardard 1-1/8" wood subsill.
FRAME
ROUGH
MASONRY
BRICKMOULD
Width
Height
Width
Height
STD
+ 3/4"
+1-7/8"
+ 3-1/8"
+ 3-1/8"
3-1/2"
+ 3/4"
+1-7/8"
+ 6-3/8"
+ 4-3/4"
For clad and wood units with HurricaneShield® impactresistant glass, see the product installation instructions or
refer to local building code requirements.
T
Tempered glass is standard.
Not to scale.
Grille patterns will align with companion hung window with equal sash split.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
5-lite high grille patterns may be ordered in 5'5" fixed units to match cottage sash vent units.
Grilles are equally-divided on fixed units with odd-number lites high.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-24
Architect Series®
Designer Series®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Exterior
HUNG
Cot tage Sash
OPENING DIMENSIONS
CLAD EXTERIOR UNITS:
Dimensions shown in tables are rough opening
dimensions.
WOOD EXTERIOR UNITS:
Use frame dimension plus dimensions below. This
dimension includes the use of stardard 1-1/8" wood subsill.
FRAME
ROUGH
MASONRY
BRICKMOULD
Width
Height
Width
Height
STD
+ 3/4"
+1-7/8"
+ 3-1/8"
+ 3-1/8"
3-1/2"
+ 3/4"
+1-7/8"
+ 6-3/8"
+ 4-3/4"
For clad and wood units with HurricaneShield® impactresistant glass, see the product installation instructions or
refer to local building code requirements.
Not to scale.
Cottage units have unequal sash split. Sash glass ratio is 40% upper sash to 60% lower sash.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Vent variable units have unequal sash split. Sash glass ratio is determined by checkrail heights. See unit sections for
dimension requirements.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-25
Architect Series®
Designer Series ®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Wood
HUNG
Replacement Double-Hung and Transoms
OPENING DIMENSIONS
CLAD EXTERIOR UNITS:
Dimensions shown in tables are rough opening
dimensions.
WOOD EXTERIOR UNITS:
Use frame dimension plus dimensions below. This
dimension includes the use of stardard 1-1/8" wood subsill.
FRAME
ROUGH
MASONRY
BRICKMOULD
Width
Height
Width
Height
STD
+ 3/4"
+1-7/8"
+ 3-1/8"
+ 3-1/8"
3-1/2"
+ 3/4"
+1-7/8"
+ 6-3/8"
+ 4-3/4"
For clad and wood units with HurricaneShield® impactresistant glass, see the product installation instructions or
refer to local building code requirements.
Egress Notes:
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 . Check all applicable local codes for emergency egress requirements.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 . Check all applicable local codes for emergency egress requirements.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of any accessory to the product.
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-26
Architect Series®
Designer Series®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Wood
HUNG
Replacement Double-Hung
OPENING DIMENSIONS
CLAD EXTERIOR UNITS:
Dimensions shown in tables are rough opening
dimensions.
WOOD EXTERIOR UNITS:
Use frame dimension plus dimensions below. This
dimension includes the use of stardard 1-1/8" wood subsill.
FRAME
ROUGH
MASONRY
BRICKMOULD
Width
Height
Width
Height
STD
+ 3/4"
+1-7/8"
+ 3-1/8"
+ 3-1/8"
3-1/2"
+ 3/4"
+1-7/8"
+ 6-3/8"
+ 4-3/4"
For clad and wood units with HurricaneShield® impactresistant glass, see the product installation instructions or
refer to local building code requirements.
Egress Notes:
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 . Check all applicable local codes for emergency egress requirements.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 . Check all applicable local codes for emergency egress requirements.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of any accessory to the product.
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-27
Architect Series®
Designer Series ®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Wood
HUNG
Replacement Cot tage
OPENING DIMENSIONS
CLAD EXTERIOR UNITS:
Dimensions shown in tables are rough opening
dimensions.
WOOD EXTERIOR UNITS:
Use frame dimension plus dimensions below. This
dimension includes the use of stardard 1-1/8" wood subsill.
FRAME
ROUGH
MASONRY
BRICKMOULD
Width
Height
Width
Height
STD
+ 3/4"
+1-7/8"
+ 3-1/8"
+ 3-1/8"
3-1/2"
+ 3/4"
+1-7/8"
+ 6-3/8"
+ 4-3/4"
For clad and wood units with HurricaneShield® impactresistant glass, see the product installation instructions or
refer to local building code requirements.
Egress Notes:
E = Window meets minimum clear opening of 24"
height, 20" width, and 5.7 ft 2 . Check all applicable
local codes for emergency egress requirements.
E1 = Window meets minimum clear opening of 24"
height, 20" width, and 5.0 ft 2 . Check all applicable
local codes for emergency egress requirements.
See Design Data pages in this section for clear opening
dimensions.
Clear opening (egress) information does not take into
consideration the addition of any accessory to the
product.
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-28
Architect Series®
Designer Series®
Pella® (ProLine)
SIZE TABLES
Wood and Aluminum-Clad Wood
HUNG
Replacement Fixed Units
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Pe l l a 2 011 A r c h i t e c t u r a l D e s i g n M a n u a l | D i v i s i o n 0 8 – O p e n i n g s | W i n d o w s a n d D o o r s | w w w. Pe l l a A D M . c o m
W-HG-29