SSMB-SSLB-SSMC Series

D I G I TA L C ATA L O G
Microminiature
Coaxial
Connectors
SSMB
SSLB
SSMC
APPLIED ENGINEERING PRODUCTS
104 John W. Murphy Drive • P.O. Box 510 • New Haven, CT 06513
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • e-mail: [email protected]
SSMB/SSLB/SSMC Microminiature Connectors
Click at the bottom of any page to go to the AEP website.
Contents
(Click on any line to jump to the page)
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Technical Information
Special features and options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mated-pair dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interfaces and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSWR data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4
5
6
SSMB Series
Cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Bulkhead mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
P.C. board receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Panel mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SSLB Series
Cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vibration-proof float mount plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bulkhead mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P.C. board receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
16
17
18
SSMC Series
Cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bulkhead mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P.C. board receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
22
23
27
27
P.C. Board Mounted Cable Terminations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Assembly Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Index by AEP Part Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
About AEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
1
SSMB/SSLB/SSMC Microminiature Connectors
Introduction
SSMB (snap-on mating), SSLB (slide-on mating), and SSMC (screw-on mating) microminiature
connectors from AEP can be the answer you’re looking for in your applications that are short
on space but need to be long on performance.
Although SSMB and SSMC connectors are about a third smaller than SMB and SMC
connectors,AEP’s design skills and materials engineering make them remarkably rugged—
in most cases, even more reliable than their larger
HOW THEY STACK UP:
counterparts. For example, AEP’s SSMB
(mated pairs)
connectors have been tested to over
Right angle PCB receptacle and straight cable plug
1,000 mating cycles (twice the MILSMA
SMB
SSMB
spec requirement) without loss of
.375"
.345"
.237"
performance. And because they are
P.C. BOARD
included inMIL-PRF-39012, you don’t have
to take the risk of using a proprietary
Straight PCB receptacle and right angle cable plug
design—AEP’s SSMB and SSMC connectors are
SMA
fully intermateable with other manufacturers’ parts.
SMB
The superior electrical characteristics of SSMB and
SSMB
.775"
SSMC connectors (see page 6) even makes them an
.625"
.510"
alternative to much larger SMA connectors in
many applications.
P.C. BOARD
(SSMC series offers similar space savings vs. SMC and SMA)
In this catalog, you’ll find such innovative and useful
configurations as:
• P.C. board receptacles with pretinned legs and contacts (see page 3 for more information);
• Surface-mountable P.C. board receptacles, in top and edge mount types (see page 3 for
more information);
• P.C. board cable terminations, for easy, permanent attachment of cable to P.C. boards without
the need to pigtail cable braid (see page 28);
• Vibration-proof, float mounted SSLB plugs, ideal for use in rack-and-panel applications with
multiple connector pairs (see page 4 for more information)
All SSMB, SSLB, and SSMC connectors are gold-plated for superior electrical and
environmental performance.
Save yourself time, money, and trouble—call the experts at AEP for complete cable
assemblies using SSMB, SSLB, and SSMC connectors. With experience in producing thousands
of microminiature cable assemblies for such demanding applications as SINCGARS (the U.S.
Army’s primary tactical field radio system), AEP can provide you with complete, tested,
guaranteed cable assemblies—flexible or semi-rigid; any size, any quantity.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
2
SSMB/SSLB/SSMC Features and Options
Surface Mount P.C. Board Receptacles
AEP SSMB and SSMC surface-mount P.C. board receptacles are available in top mount and edge mount types
(see below). when mounted, they withstand torque, shear, and pull forces greatly in excess of standard mating
and unmating forces. Tape-and-reel packaging is available for top-mount versions.
AEP surface-mount P.C. board receptacles meet all interface requirements of MIL-STD-348, and appropriate
performance requirements of MIL-PRF-39012. Most configurations can also be furnished with pretinned legs
(see bottom of this page) for convenient, reliable assembly.
Edge-mount types in this catalog are designed for .031" thick P.C. boards, but they are readily available for boards
up to .045" thick. Connectors for thicker boards can be supplied by special order.
Edge mount
Solder
(top legs)
Top mount
Solder (leg) (typ.)
Solder (leg)
Ground trace
Ground trace
Printed circuit board
Printed circuit board
Printed circuit board
Signal trace
Solder
(bottom legs and
center conductor)
Signal trace
Solder (legs)
Ground trace
Solder
(center conductor)
Solder (center conductor)
P.C. board
Ground trace
Solder (leg)
Panel
P.C. board
P.C. board
Panel
P.C. board
Straight and right-angle bulkhead
mounted jacks (top mount)
P.C. board
Panel
Straight and right-angle bulkhead
mounted jacks (edge mount)
P.C. board
Panel
Combining AEP’s surface-mount technology with various body styles and interfaces can provide an almost
unlimited variety of configurations—these are just a few examples.
P.C. board
P.C. board
Edge mount jack and
top mount plug in
daughtercard application
Edge mount, crimp type
cable termination for
hardwiring cable to board
without drilling board or
pigtailing cable
P.C. Board Receptacles with Pretinned Legs and Contacts
AEP pretinned P.C. board receptacles are shipped with a
Hot solder dip (legs and contact)
Sn63, .002–.005 thick, to within
tightly-controlled layer of solder on the legs and center
.040 of body, 95% minimum
conductor, eliminating gold embrittlement in solder joints.
coverage, gold removed during
Nickel-plated connectors with pretinned legs have the
tinning operation.
solderability of gold or silver-plated connectors at lower cost.
Computer-controlled, automated solder-dipping equipment and custom fixturing
ensure precise, consistent coverage to AEP standard specification (see above),
or customer-specified requirements.
Tinned areas meet the solderability requirements of MIL-STD-202, Method 208 after
eight hours steam aging. Pretinned legs are available on most P.C. board receptacles
in this catalog—see product pages for part numbers.
P.C. Board Receptacles with Standoff Legs
AEP P.C. board receptacles with stepped
legs raise the connector body above the
board surface, allowing free flow of
cleaning solutions and air, as well as
providing space for visual inspection.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
Standoffs milled into legs hold the
connector body a precise distance
above the board during soldering.
.020
P.C. board
www.aep.us • [email protected]
3
SSMB/SSLB/SSMC Features and Options
Vibration-Proof Float Mounted Plugs (see page 14)
Misaligned mating connectors
press against the tapered hood
during mating...
...and the hood
guides the
float-mounted
connector into
alignment for
proper mating,
while the spring
washer deflects to accommodate
the angular and radial movement
with no loss of grounding.
Panel
Panel
AEP’s vibration-proof float mounted plugs (SSLB series
only) use a tempered spring washer within the mounting
system for reliable grounding between the connector and
the panel under vibration. Mounting integrity is
augmented by the Truarc retaining ring, which provides
almost 360˚ of contact within its retaining groove, as
opposed to the 10–20˚ of contact typical of C-ring or
E-ring retaining clips. This makes it virtually impossible
to dislodge the connectors from their panel mountings
under any conditions of mechanical stress.
This system, combined with closed-end mating hoods
and inner female contacts, allows the connectors a wide
range of float while mating without damage to the
connectors. Their reliability has been proven through
thousands of hours of flight time in avionics systems
over the past ten years without a single field failure.
Mated-Pair Dimension Examples
The examples below illustrate working dimensions for some common connector pair applications
(SSMB and SSLB series connectors). Multiple pairs can be placed on spacing as close as .200" centerlines.
Mated pairs of SSMC connectors have similar envelope dimensions, but additional space should be allowed
on all axes for wrench access when mating.
.237
.157
.159
.432
.235
.505
.510
P.C. board
P.C. board
Panel
.427
Straight cable plug (7202 series)
and right angle P.C. board jack
receptacle (7210 series)
Right angle cable plug
(7405 series) and straight
P.C. board jack receptacle
(7209 series)
Panel
Right angle cable jack
(7441 series) and recessed
bulkhead jack receptacle
(7496 series)
Panel
Right angle cable plug
(7405 series) and straight
bulkhead jack receptacle
(7219 series)
P.C. board
Panel
.075
.405
Panel
A
P.C. board
Panel
Straight P.C. board plug
(7225 series) and straight
P.C. board jack (7209 series)
Right angle float-mounted
cable plug (7335 series)
and straight bulkhead
cable jack (7303 series):
Panel Thickness
.050"
.093"
‘A’
.360
.274
Straight bulkhead jack receptacle
(7219 series) and recessed bulkhead
jack receptacle (7496 series)
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
4
SSMB / SSLB / SSMC Specifications
SSMB Interface Dimensions
Specifications
Plug
SSMB and SSLB (MIL-PRF-39012 as applicable)
Closed-entry contact
accepts .014–.015 dia. pin
Jack
90˚
.003/.006
Reference plane
.053
max dia.
.122
.000/.015
.070 max.
.000 min.
.028/.029
C
L
.185 max dia.
See detail above
.033 min.
.122 min.
Reference plane
.014/.015 dia.
.054 min dia.
.105 max dia.
.033 max
.075 min
Reference plane
.075 min
SSLB Interface Dimensions
Plug
Closed-entry contact
accepts .014–.015 dia. pin
.185 max dia.
Jack
.053
max dia.
.122
SSMC (MIL-PRF-39012 as applicable)
.000/.015
.070 max.
.000 min.
.033 min.
.122 min.
Reference plane
.014/.015 dia.
.054 min dia.
.033 max
.075 min
Reference plane
.105 max dia.
.075 min
SSMC Interface Dimensions
Plug
Closed-entry contact
accepts .014–.015 dia. pin
6–40 UNF-2B thread
.101 min dia.
.053 max dia.
Jack
.170 min
.118
.000/.015
.000 min.
Hex 5/32 A. F.
.090 max.
.200 max.
Reference plane
.014/.015 dia.
.054 min dia.
.100 max dia.
.033 max
Materials:
Plug spring fingers, center contacts: Beryllium copper per ASTM-B-196, Condition HT.
Crimp sleeves: Seamless copper tube per ASTM-B-75, type C12000, temper: light anneal 050.
Other metal parts: Brass per ASTM-B-16, Alloy 360, 1⁄ 2 hard.
Insulators: Teflon (TFE) per ASTM-D-1710.
Finish:
Center contacts: Gold plated per current revision of MIL-PRF-39012*
Other metal parts: Gold plated to meet current MIL-PRF-39012 corrosion requirements.*
Electrical:
Impedance: 50Ω. Frequency range: DC–12.4 GHz.
Voltage Rating: 250VRMS @ sea level; 60 VRMS @ 70,000 ft.
Insulation Resistance: 1,000 megohms minimum.
Contact Resistance:
Center contact: Initial: 4.0 milliohms maximum;
after environmental test conditions: 6.0 milliohms maximum.
Outer contact: Initial: 1.0 milliohms maximum;
after environmental test conditions: 1.5 milliohms maximum.
Cable braid to body: Initial: 1.0 milliohms maximum; after environmental test conditions: N/A.
Corona level: 125V @70,000 ft. RF highpot: 400 VRMS @ 5 MHz.
RF leakage: -70 dB min @ 2–3 GHz. Insertion loss: .30 dB max @ 1.5 GHz.
VSWR:
Cable
Straight connector
Right angle connector
RG-178
1.25 + (.020 x F[GHz])
1.25 + (.030 x F[GHz])
RG-316
1.30 + (.020 x F[GHz])
1.30 + (.030 x F[GHz])
.085" semi-rigid
1.25 + (.015 x F[GHz])
1.25 + (.025 x F[GHz])
Mechanical:
Force to engage: SSMB: Initial, 6 pounds max engagement, 2 pounds min disengagement.
After 500 matings, 6 pounds max engagement, 1 pound min disengagement.
SSLB: Initial, 3 pounds max engagement, .5 pounds min disengagement.
Contact retention: 2 pounds min axial force.
Durability: 500 mating cycles.
Environmental (MIL-STD-202):
Temperature range: -65˚ C to +165˚ C. Corrosion: Method 101, condition B, 5% salt solution.
Vibration (Method 204): SSMB: Condition B (15G), SSLB: Condition A (10G).
Mechanical shock (Method 213): SSMB: Condition B, 75G @ 6 ms @ 1⁄ 2 sine, SSLB: N/A.
.000 min
6–40 UNF-2A thread
.090 min
Reference plane
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
Materials:
Jack mating ends, center contacts: Beryllium copper per ASTM-B-196, Condition HT.
Crimp sleeves: Seamless copper tube per ASTM-B-75, type C12000, temper: light anneal 050.
Other metal parts: Brass per ASTM-B-16, Alloy 360, 1⁄ 2 hard.
Insulators: Teflon (TFE) per ASTM-D-1710.
Finish:
Center contacts: Gold plated per current revision of MIL-PRF-39012*
Other metal parts: Gold plated to meet current MIL-PRF-39012 corrosion requirements.*
Electrical:
Impedance: 50Ω. Frequency range: DC–12.4 GHz.
Voltage Rating: 250VRMS @ sea level; 60 VRMS @ 70,000 ft.
Insulation Resistance: 1,000 megohms minimum.
Contact Resistance:
Center contact: Initial: 4.0 milliohms maximum;
after environmental test conditions: 6.0 milliohms maximum.
Outer contact: Initial: 1.0 milliohms maximum;
after environmental test conditions: 1.5 milliohms maximum.
Cable braid to body: Initial: 1.0 milliohms maximum; after environmental test conditions: N/A.
Corona level: 125V @70,000 ft. RF highpot: 400 VRMS @ 5 MHz.
RF leakage: -50 dB min @ 2–3 GHz. Insertion loss: .30 dB max @ 1.5 GHz.
VSWR:
Cable
Straight connector
Right angle connector
RG-178
1.20 + (.020 x F[GHz])
1.20 + (.030 x F[GHz])
RG-316
1.25 + (.020 x F[GHz])
1.25 + (.030 x F[GHz])
.085" semi-rigid
1.20 + (.015 x F[GHz])
1.20 + (.025 x F[GHz])
Mechanical:
Force to engage: 16 inch-ounces torque max.
Mating torque: 28–32 inch-ounces.
Coupling nut pulloff resistance: 25 pounds min.
Contact retention: 2 pounds min axial force.
Durability: 500 mating cycles.
Environmental (MIL-STD-202):
Temperature range: -65˚ C to +165˚ C. Corrosion: Method 101, condition B, 5% salt solution.
Vibration (Method 204): Condition D (20G).
Mechanical shock (Method 213): Condition B, 75G @ 6 ms @ 1⁄ 2 sine.
*These specifications change periodically with updates to MIL-PRF-39012 requirements.
Contact factory for latest specifications.
www.aep.us • [email protected]
5
SSMB / SSLB / SSMC Specifications
VSWR Data
Specification requirement
Actual (Connectors tested using 200' of cable as load.)
SSMC
1.5
1.5
1.4
1.4
VSWR
VSWR
SSMB
1.3
1.2
1.3
1.2
1.1
1.1
1 GHz
2
3
4
5
6
7
8
9
10
1 GHz
12 12.4
11
1.5
1.4
1.4
VSWR
VSWR
1.5
1.3
1.2
1 GHz
4
5
6
7
8
9
10
12 12.4
11
1.3
1.2
2
3
4
5
6
7
8
9
10
1 GHz
12 12.4
11
2
3
4
5
6
7
8
9
10
12 12.4
11
Straight plug, .085" semi-rigid cable (7002-1541-010)
Straight plug, .085" semi-rigid cable (7202-1542-010)
1.5
1.5
1.4
1.4
VSWR
VSWR
3
1.1
1.1
1.3
1.2
1.3
1.2
1.1
1.1
1 GHz
2
3
4
5
6
7
8
9
10
1 GHz
12 12.4
11
2
3
4
5
6
7
8
9
10
12 12.4
11
Right angle plug, RG-178 flexible cable (7105-1521-002)
Right angle plug, RG-178 flexible cable (7405-1521-002)
1.5
1.5
1.4
1.4
VSWR
VSWR
2
Straight plug, RG-178 flexible cable (7002-1571-002)
Straight plug, RG-178 flexible cable (7202-1572-002)
1.3
1.2
1.3
1.2
1.1
1.1
1 GHz
2
3
4
5
6
7
8
9
10
1 GHz
12 12.4
11
2
3
4
5
6
7
8
9
10
12 12.4
11
Right angle plug, .085" semi-rigid cable (7105-1561-010)
Right angle plug, .085" semi-rigid cable (7405-1561-010)
Comparative VSWR
VSWR limits for SMA, SMB, SMC, MCX, and MMCX from MIL-PRF-39012 and/or manufacturer specifications
SSMB
SSMB
SMA
SMB
Frequency limit, SMB
MCX
MMCX
SSMC
Frequency limit, MCX and MMCX
SMA
SMC
Frequency limit, MCX and MMCX
1.5
1.5
1.4
1.4
VSWR
VSWR
SSMC
1.3
1.2
1.1
MCX
MMCX
Frequency limit, SMC
1.3
1.2
1.1
1 GHz
2
3
4
5
6
7
8
9
10
11
Straight plug, RG-178 flexible cable (7202-1572-002)
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
12 12.4
1 GHz
2
3
4
5
6
7
8
9
10
11
12 12.4
Straight plug, RG-178 flexible cable (7002-1571-002)
www.aep.us • [email protected]
6
SSMB Cable Connectors
Straight Cable Plugs
Crimp type for flexible cable
Solder type for semi-rigid cable
.53
.70
.180 dia.
.180 dia.
.174
Hex 5/32 A. F.
Hex 5/32 A. F.
AEP P/N
7202-1572-0XX*
AEP P/N
7202-1542-0XX*
Right Angle Cable Plugs
Crimp type for flexible cable
.421
.343
Solder type for semi-rigid cable
.421
.343
.156 Cube
.156 Cube
.180 dia.
.180 dia.
.322
.330
.244
.166
.252
.174
AEP P/N
7405-1521-0XX*
AEP P/N
7405-1561-0XX*
Straight Cable Jacks
Crimp type for flexible cable
Solder type for semi-rigid cable
.63
Hex 5/32 A. F.
.46
.174
Hex 5/32 A. F.
AEP P/N
7201-1571-0XX*
AEP P/N
7201-1541-0XX*
*Substitute the appropriate cable group number for “XX” when ordering:
GROUP
02
03
CABLE TYPES
RG178, RG196, M17/93, M17/169
RG174, RG179, RG316, M17/113,
M17/119, M17/172, M17/189
GROUP
05
10
11
CABLE TYPES
RG178DS, RG196DS
.085" semi-rigid, RG405, M17/133
.047" semi-rigid, M17/151
GROUP
19
21
CABLE TYPES
RG174DS, RG316DS, M17/151,
M17/152, Times RD-316
.056" semi-rigid
Cable assembly instructions are shipped with each connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
7
SSMB Cable Connectors
Right Angle Cable Jacks
Crimp type for flexible cable
Solder type for semi-rigid cable
.384
.306
.384
.306
.156 Cube
.156 Cube
.322
.330
.244
.166
.252
.174
AEP P/N
7441-1521-0XX*
AEP P/N
7441-1561-0XX*
Straight Bulkhead Mounted Cable Jacks (.093" max panel thickness)
Crimp type for flexible cable
.360
.126§
Solder type for semi-rigid cable
.37
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
.360
.19
Hex 3/16 A. F.
Hex 5/32 A. F.
.126§
.174
.140 dia.§
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 5/32 A. F.
AEP P/N
7203-1571-0XX*
AEP P/N
7203-1541-0XX*
Right Angle Bulkhead Mounted Cable Jacks (.125" max panel thickness)
Crimp type for flexible cable
.492
.386
.126§
Solder type for semi-rigid cable
.570
.156 Cube
.140 dia.§
.492
.386
.126§
.570
.156 Cube
.140 dia.§
.330
.252
.174
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
AEP P/N
7406-1521-0XX*
.322
.244
.166
AEP P/N
7406-1561-0XX*
These connectors can be supplied with other mating end lengths to
accommodate a wide range of panel thicknesses—contact factory for availability.
*Substitute the appropriate cable group number for “XX” when ordering:
GROUP
02
03
CABLE TYPES
RG178, RG196, M17/93, M17/169
RG174, RG179, RG316, M17/113,
M17/119, M17/172, M17/189
GROUP
05
10
11
CABLE TYPES
RG178DS, RG196DS
.085" semi-rigid, RG405, M17/133
.047" semi-rigid, M17/151
GROUP
19
21
CABLE TYPES
RG174DS, RG316DS, M17/151,
M17/152, Times RD-316
.056" semi-rigid
Cable assembly instructions are shipped with each connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
8
SSMB Bulkhead Mounted Receptacles
Straight Bulkhead Jack Receptacles (.093" max panel thickness)
Rear mount
Front mount
.51
.51
.150
.360
.126§
.260
.080
.080
.150
.126§
.036 dia.
.140 dia.§
.140 dia.§
.036 dia.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.020 dia.
Hex 5/32 A. F.
Hex 3/16 A. F.
Hex 5/32 A. F.
AEP P/N
7204-1511-000
.020 dia.
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 3/16 A. F.
AEP P/N
7219-1511-000
Right Angle Bulkhead Receptacles (.093" max panel thickness)
Jack type
Plug type
.384
.306
.421
.343
.140 dia.§
.126§
.227
.143
.180 dia.
Hex 3/16 A. F.
.156 sq.
.48
§ Recommended
mounting hole size,
tolerance +.003, -.000
.150
.126§
.227
.143
.156 sq.
.48
.020 dia.
.140 dia.§
.150
Hex 3/16 A. F.
.020 dia.
.080
§ Recommended
mounting hole size,
tolerance +.003, -.000
.080
.036 dia.
.036 dia.
AEP P/N
7212-1511-000
AEP P/N
7240-1511-000
Straight Bulkhead Plug Receptacles
Front mount
(.093"max panel thickness)
Recessed mount
(.200"max panel thickness)
.565
Hex 11/32 A. F.
.57
.32
.080
.150
.365
.030
.126§
.080
.036 dia.
.140 dia.§
.180 dia.
.020 dia.
Hex 3/16 A. F.
.036 dia.
.020 dia.
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
9/32-40 UNS-2A thread
Hex 3/8 A. F.
AEP P/N
7217-1512-000
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
AEP P/N
7496-1512-000
www.aep.us • [email protected]
9
SSMB P.C. Board Receptacles
Straight P.C. Board Receptacles
Standard legs
Standoff legs
.020 sq. (typ.)
.419
.020 sq. (typ.)
.419
.156 sq.
.026
dia.
.156 sq.
LEG FINISH
GOLD
.100 (typ.)
.026 dia.
.155
.264
AEP P/N
7209-1511-000
LEG FINISH
PRETINNED
.135
.284
AEP P/N
7209-1511-012
LEG FINISH
GOLD
AEP P/N
7209-1511-011
Surface mount
.038 sq. (typ.)
LEG FINISH
PRETINNED
AEP P/N
7209-1511-040
Edge mount
.156 sq.
.289
.100 (typ.)
.419
.080
.031
(P.C. board
thickness)
.156 sq.
.020 (typ.)
.264
.026 dia.
.025
LEG FINISH
GOLD
.264
.038 (typ.)
AEP P/N
7209-1511-015
LEG FINISH
GOLD
.155
.026 dia.
AEP P/N
7209-1511-023
LEG FINISH
PRETINNED
AEP P/N
7209-1511-061
Right Angle P.C. Board Receptacles
Standard legs
Standoff legs
.384
.384
.156 sq.
.306
.156 sq.
.306
.026 dia.
.225
.141
.38
.155
LEG FINISH
GOLD
AEP P/N
7210-1511-000
.020 sq.
(typ.)
.100 (typ.)
.100 (typ.)
LEG FINISH
PRETINNED
AEP P/N
7210-1511-012
LEG FINISH
GOLD
Surface mount
.026 dia.
AEP P/N
7210-1511-050
LEG FINISH
PRETINNED
AEP P/N
7210-1511-040
Edge mount
.384
.156 sq.
.306
.247
.163
.020 (typ.)
.306
.156 sq.
.225
.141
.026 dia.
.038 (typ.)
.080
LEG FINISH
GOLD
.020 sq.
(typ.)
.135
.384
.025
.038 sq.
(typ.)
.245
.161
.38
AEP P/N
7210-1511-015
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.38
.155
LEG FINISH
GOLD
AEP P/N
7210-1511-060
www.aep.us • [email protected]
.031
.026 dia.
LEG FINISH
PRETINNED
(P.C. board
thickness)
AEP P/N
7210-1511-061
10
SSMB P.C. Board Receptacles
Straight Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)
Standard legs
.585
.140 dia.§
.430
.386
.020 sq. (typ.)
.156 sq.
.126§
§ Recommended
3
mounting hole size, Hex /16 A. F.
tolerance +.003, -.000
.100 (typ.)
.026 dia.
.155
LEG FINISH
GOLD
PRETINNED
AEP P/N
7229-1511-000
7229-1511-012
LEG FINISH
GOLD
PRETINNED
AEP P/N
7229-1511-050
7229-1511-040
LEG FINISH
GOLD
AEP P/N
7229-1511-015
LEG FINISH
GOLD
PRETINNED
AEP P/N
7229-1511-060
7229-1511-061
Standoff legs
.585
.140 dia.§
.450
.386
.020 sq. (typ.)
.126§
§ Recommended
3
mounting hole size, Hex /16 A. F.
tolerance +.003, -.000
.135
.156 sq.
.026
dia.
.100 (typ.)
.038 sq. (typ.)
Surface mount
.140 dia.§
.455
.386
.156 sq.
.080
.126§
§ Recommended
3
mounting hole size, Hex /16 A. F.
tolerance +.003, -.000
.026 dia.
.025
.038 (typ.)
Edge mount
.585
.140 dia.§
.430
.386
.031
.156 sq.
.126§
§ Recommended
3
mounting hole size, Hex /16 A. F.
tolerance +.003, -.000
(P.C. board
thickness)
.020 (typ.)
.155
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.026 dia.
www.aep.us • [email protected]
11
SSMB P.C. Board Receptacles
Right Angle Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)
Standard legs
.492
.386
.126§
.570
.156 sq.
.026 dia.
.140
dia.§
.225
.141
.38
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.155
.100 (typ.)
LEG FINISH
GOLD
PRETINNED
AEP P/N
7410-1511-000
7410-1511-012
LEG FINISH
GOLD
PRETINNED
AEP P/N
7410-1511-050
7410-1511-040
LEG FINISH
GOLD
AEP P/N
7410-1511-015
LEG FINISH
GOLD
PRETINNED
AEP P/N
7410-1511-060
7410-1511-061
.020 sq.
(typ.)
Standoff legs
.570
.126§
.492
.386
.156 sq.
.140
dia.§
.038 sq.
(typ.)
.245
.161 .38
Hex 3/16 A. F.
.100 (typ.)
§ Recommended
mounting hole size,
tolerance +.003, -.000
.020 sq.
(typ.)
.026 dia.
.135
Surface mount
.570
.126§
.492
.386
.156 sq.
.080
.140
dia.§
.247
.163
Hex 3/16 A. F.
.026 dia.
.038 (typ.)
§ Recommended
.025 mounting hole size, tolerance +.003, -.000
Edge mount
.570
.126§
.492
.386
.020 (typ.)
.140
dia.§
.156 sq.
.225
.141
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.38
.155
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.031
.026 dia.
(P.C. board
thickness)
www.aep.us • [email protected]
12
SSMB P.C. Board Receptacles
Straight Plug Type P.C. Board Receptacles
Standard legs
Standoff legs
.020 sq. (typ.)
.472
.187
dia.
.180 dia.
LEG FINISH
GOLD
AEP P/N
7225-1512-000
.187
dia.
.180 dia.
.026
dia.
.155
.317
.100 (typ.)
.337
LEG FINISH
PRETINNED
AEP P/N
7225-1512-012
LEG FINISH
GOLD
.135
AEP P/N
7225-1512-050
Surface mount
.026
dia.
.100 (typ.)
.038 sq. (typ.)
LEG FINISH
PRETINNED
AEP P/N
7225-1512-040
Edge mount
.342
.031 (P.C. board thickness)
.472
.080
.187 dia.
.180 dia.
.020 sq. (typ.)
.472
.180 dia.
.187 dia.
.020 (typ.)
.317
.054 (typ.)
.026 dia.
.025
LEG FINISH
GOLD
AEP P/N
7225-1512-015
.155
.317
LEG FINISH
GOLD
AEP P/N
7225-1512-060
.026 dia.
LEG FINISH
PRETINNED
AEP P/N
7225-1512-061
Right Angle Plug Type P.C. Board Receptacles
Standard legs
Standoff legs
.421
.421
.156 sq.
.343
.156 sq.
.343
.026 dia.
.225
.141
.180 dia.
.38
.100 (typ.)
.155
LEG FINISH
GOLD
AEP P/N
7242-1511-000
.020 sq.
(typ.)
.245
.161
.38
.180 dia.
.020 sq.
(typ.)
.100 (typ.)
.026 dia.
.135
LEG FINISH
PRETINNED
AEP P/N
7242-1511-012
LEG FINISH
GOLD
Surface mount
.421
AEP P/N
7242-1511-050
LEG FINISH
PRETINNED
AEP P/N
7242-1511-040
Edge mount
.421
.156 sq.
.343
.025
.156 sq.
.225
.141
.026 dia.
.038 (typ.)
.180 dia.
.020 (typ.)
.343
.247
.163
.180 dia.
.080
LEG FINISH
GOLD
.038 sq.
(typ.)
AEP P/N
7242-1511-015
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.38
.031
.026 dia.
.155
LEG FINISH
GOLD
AEP P/N
7242-1511-060
www.aep.us • [email protected]
LEG FINISH
PRETINNED
(P.C. board
thickness)
AEP P/N
7242-1511-061
13
SSMB Receptacles and Adapters
Straight Panel Jack Receptacle (Stainless steel bodies)
4-hole flange
.500
.125
2-hole flange
.500
.125
.164 (typ.)
.065
.140
.065
.026 dia.
.026 dia.
.362
.281 sq.
.232
.017 dia.
.017 dia.
.084 dia.
.067 dia. (typ.)
.375
.035
.375
AEP P/N
7498-1513-000
.067 dia. (typ.)
AEP P/N
7499-1513-000
Bulkhead Mounted Adapters
SSMB jack to SSMB jack
SSMC jack to SSMB jack
.62
.62
.126§
.126§
.200
.360
.200
.140 dia.§
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
.360
Hex 3/16 A. F.
Hex 5/32 A. F.
AEP P/N
7222-1501-000
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 3/16 A. F.
Hex 5/32 A. F.
AEP P/N
7022-1502-000
Adapters Between Series
N plug to SSMB jack
SMA plug to SSMB jack
1.22
.78
AEP P/N
5011-1503-000
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
AEP P/N
5937-1503-000
www.aep.us • [email protected]
14
SSLB Cable Connectors
Straight Cable Plugs
Crimp type for flexible cable
Solder type for semi-rigid cable
.53
.70
.180 dia.
.180 dia.
.174
Hex 5/32 A. F.
Hex 5/32 A. F.
AEP P/N
7302-1572-0XX*
AEP P/N
7302-1542-0XX*
Right Angle Cable Plugs
Crimp type for flexible cable
.421
.343
Solder type for semi-rigid cable
.421
.343
.156 Cube
.180 dia.
.156 Cube
.180 dia.
.330
.322
.252
.174
.244
.166
AEP P/N
7305-1521-0XX*
AEP P/N
7305-1561-0XX*
Right Angle Cable Jacks
Crimp type for flexible cable
.384
.306
Solder type for semi-rigid cable
.384
.306
.156 Cube
.156 Cube
.330
.322
.252
.174
.244
.166
AEP P/N
7341-1521-0XX*
AEP P/N
7341-1561-0XX*
*Substitute the appropriate cable group number for “XX” when ordering:
GROUP
02
03
CABLE TYPES
RG178, RG196, M17/93, M17/169
RG174, RG179, RG316, M17/113,
M17/119, M17/172, M17/189
GROUP
05
10
11
CABLE TYPES
RG178DS, RG196DS
.085" semi-rigid, RG405, M17/133
.047" semi-rigid, M17/151
GROUP
19
21
CABLE TYPES
RG174DS, RG316DS, M17/151,
M17/152, Times RD-316
.056" semi-rigid
Cable assembly instructions are shipped with each connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
15
SSLB Cable Connectors
Straight Bulkhead Mounted Cable Jacks (.093" max panel thickness)
Crimp type for flexible cable
.360
.126§
Solder type for semi-rigid cable
.37
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
.360
.19
Hex 3/16 A. F.
Hex 5/32 A. F.
.126§
.174
.140 dia.§
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 5/32 A. F.
AEP P/N
7303-1571-0XX*
AEP P/N
7303-1541-0XX*
Vibration-Proof Float Mounted Plug (See page 2 for details)
Straight—crimp type for flexible cable
.242 dia.
.70
PANEL
THICKNESS
.050
.093
.180 dia.
AEP P/N
7332-1572-0XX*
7332-1572-3XX*
.174
.065 §
Hex 5/32 A. F.
.245
§ From internal mating plane
(end of mating connector when
fully engaged) to rear of panel
Vibration-Proof Float Mounted Plug (See page 2 for details)
Right angle—crimp type for flexible cable
.421
.343
.065 §
.242 dia.
.156 Cube
PANEL
THICKNESS
.050
.093
AEP P/N
7335-1521-0XX*
7335-1521-3XX*
.180 dia.
.330
.252
.174
.245
§ From internal mating plane
(end of mating connector when
fully engaged) to rear of panel
*Substitute the appropriate cable group number for “XX” when ordering:
GROUP
02
03
CABLE TYPES
RG178, RG196, M17/93, M17/169
RG174, RG179, RG316, M17/113,
M17/119, M17/172, M17/189
GROUP
05
10
11
CABLE TYPES
RG178DS, RG196DS
.085" semi-rigid, RG405, M17/133
.047" semi-rigid, M17/151
GROUP
19
21
CABLE TYPES
RG174DS, RG316DS, M17/151,
M17/152, Times RD-316
.056" semi-rigid
Cable assembly instructions are shipped with each connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
16
SSLB Bulkhead Mounted Receptacles
Bulkhead Jack Receptacles (.093" max panel thickness)
Straight
Right angle
.384
.306
.140 dia.§
.51
.150
.360
.126§
.080
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
.020 dia.
.156 sq.
.48
.036 dia.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.150
Hex 5/32 A. F.
Hex 3/16 A. F.
.126§
.227
.143
Hex 3/16 A. F.
.020 dia.
.080
.036 dia.
AEP P/N
7304-1511-000
AEP P/N
7312-1511-000
Bulkhead Plug Receptacles (.093" max panel thickness)
Straight
Right angle
.421
.343
.57
.32
.140 dia.§
.080
.150
.180 dia.
.126§
.036 dia.
.140 dia.§
.180 dia.
.020 dia.
.48
.150
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 3/16 A. F.
.126§
.227
.143
Hex 3/16 A. F.
.020 dia.
.156 sq.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.080
.036 dia.
AEP P/N
7317-1512-000
AEP P/N
7340-1511-000
Straight Bulkhead Plug Receptacle (.250" max panel thickness)
Recessed mount
.565
Hex 11/32 A. F.
.365
.030
.080
AEP P/N
7396-1512-000
.036 dia.
.020 dia.
Hex 3/16 A. F.
9/32-40 UNS-2A thread
Hex 3/8 A. F.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
17
SSLB P.C. Board Receptacles
Straight P.C. Board Receptacles
Standard legs
Standoff legs
.020 sq. (typ.)
.419
.020 sq. (typ.)
.419
.156 sq.
.026
dia.
.156 sq.
LEG FINISH
GOLD
.100 (typ.)
.026 dia.
.155
.264
AEP P/N
7309-1511-000
LEG FINISH
PRETINNED
.135
.284
AEP P/N
7309-1511-012
LEG FINISH
GOLD
AEP P/N
7309-1511-050
Surface mount
.038 sq. (typ.)
LEG FINISH
PRETINNED
AEP P/N
7309-1511-040
Edge mount
.156 sq.
.289
.100 (typ.)
.419
.080
.031
(P.C. board
thickness)
.156 sq.
.020 (typ.)
.264
.026 dia.
.025
LEG FINISH
GOLD
.155
.264
.038 (typ.)
AEP P/N
7309-1511-015
LEG FINISH
GOLD
AEP P/N
7309-1511-060
.026 dia.
LEG FINISH
PRETINNED
AEP P/N
7309-1511-061
Right Angle P.C. Board Receptacles
Standard legs
Standoff legs
.384
.384
.156 sq.
.306
.156 sq.
.306
.026 dia.
.225
.141
.38
LEG FINISH
GOLD
AEP P/N
7310-1511-000
.020 sq.
(typ.)
.100 (typ.)
.155
.026 dia.
.135
LEG FINISH
PRETINNED
AEP P/N
7310-1511-012
LEG FINISH
GOLD
AEP P/N
7310-1511-050
LEG FINISH
PRETINNED
AEP P/N
7310-1511-040
Edge mount
.384
.384
.156 sq.
.306
.247
.163
.020 (typ.)
.306
.156 sq.
.225
.141
.026 dia.
.038 (typ.)
.080
LEG FINISH
GOLD
.020 sq.
(typ.)
.100 (typ.)
Surface mount
.025
.038 sq.
(typ.)
.245
.161
.38
AEP P/N
7310-1511-015
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.38
.155
LEG FINISH
GOLD
AEP P/N
7310-1511-060
www.aep.us • [email protected]
.031
.026 dia.
LEG FINISH
PRETINNED
(P.C. board
thickness)
AEP P/N
7310-1511-061
18
SSLB P.C. Board Receptacles
Straight Plug Type P.C. Board Receptacles
Standard legs
Standoff legs
.020 sq. (typ.)
.472
.187
dia.
.180 dia.
LEG FINISH
GOLD
AEP P/N
7325-1512-000
.187
dia.
.180 dia.
.026
dia.
.155
.317
.100 (typ.)
.135
.337
LEG FINISH
PRETINNED
AEP P/N
7325-1512-012
LEG FINISH
GOLD
AEP P/N
7325-1512-050
Surface mount
.026
dia.
.100 (typ.)
.038 sq. (typ.)
LEG FINISH
PRETINNED
AEP P/N
7325-1512-040
Edge mount
.342
.031 (P.C. board thickness)
.472
.080
.180 dia.
.187 dia.
.180 dia.
.020 sq. (typ.)
.472
.187 dia.
.020 (typ.)
.317
.025
LEG FINISH
GOLD
.317
.054 (typ.)
.026 dia.
AEP P/N
7325-1512-015
LEG FINISH
GOLD
.155
AEP P/N
7325-1512-060
.026 dia.
LEG FINISH
PRETINNED
AEP P/N
7325-1512-061
Right Angle Plug Type P.C. Board Receptacles
Standard legs
Standoff legs
.421
.421
.156 sq.
.343
.156 sq.
.343
.026 dia.
.225
.141
.180 dia.
.020 sq.
(typ.)
.38
.100 (typ.)
.180 dia.
AEP P/N
7342-1511-000
.020 sq.
(typ.)
.100 (typ.)
.135
LEG FINISH
PRETINNED
AEP P/N
7342-1511-012
LEG FINISH
GOLD
Surface mount
AEP P/N
7342-1511-050
LEG FINISH
PRETINNED
AEP P/N
7342-1511-040
Edge mount
.421
.421
.156 sq.
.343
.025
.156 sq.
.225
.141
.180 dia.
.026 dia.
.038 (typ.)
.180 dia.
.020 (typ.)
.343
.247
.163
.080
LEG FINISH
GOLD
.038 sq.
(typ.)
.026 dia.
.155
LEG FINISH
GOLD
.245
.161
.38
AEP P/N
7342-1511-015
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.38
.031
.026 dia.
.155
LEG FINISH
GOLD
AEP P/N
7342-1511-060
www.aep.us • [email protected]
LEG FINISH
PRETINNED
(P.C. board
thickness)
AEP P/N
7342-1511-061
19
SSMC Cable Connectors
Straight Cable Plugs
Crimp type for flexible cable
Solder type for semi-rigid cable
.53
.70
.174
Hex 5/32 A. F.
Hex 5/32 A. F.
AEP P/N
7002-1572-0XX*
AEP P/N
7002-1542-0XX*
Right Angle Cable Plugs
Crimp type for flexible cable
.430
.352
Solder type for semi-rigid cable
.430
.352
.156 Cube
.156 Cube
.322
.330
Hex 5/32 A. F.
.252
.174
.244
.166
Hex 5/32 A. F.
AEP P/N
7105-1521-0XX*
AEP P/N
7105-1561-0XX*
Straight Cable Jacks
Crimp type for flexible cable
Solder type for semi-rigid cable
.46
.63
Hex 5/32 A. F.
.174
Hex 5/32 A. F.
AEP P/N
7101-1571-0XX*
AEP P/N
7101-1541-0XX*
*Substitute the appropriate cable group number for “XX” when ordering:
GROUP
02
03
CABLE TYPES
RG178, RG196, M17/93, M17/169
RG174, RG179, RG316, M17/113,
M17/119, M17/172, M17/189
GROUP
05
10
11
CABLE TYPES
RG178DS, RG196DS
.085" semi-rigid, RG405, M17/133
.047" semi-rigid, M17/151
GROUP
19
21
CABLE TYPES
RG174DS, RG316DS, M17/151,
M17/152, Times RD-316
.056" semi-rigid
Cable assembly instructions are shipped with each connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
20
SSMC Cable Connectors
Right Angle Cable Jacks
Crimp type for flexible cable
Solder type for semi-rigid cable
.384
.306
.384
.306
.156 Cube
.156 Cube
.330
.322
.252
.174
.244
.166
AEP P/N
7141-1521-0XX*
AEP P/N
7141-1561-0XX*
Straight Bulkhead Mounted Cable Jacks (.093" max panel thickness)
Crimp type for flexible cable
.126§
Solder type for semi-rigid cable
.37
.360
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
.360
.19
Hex 3/16 A. F.
Hex 5/32 A. F.
.126§
.174
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 5/32 A. F.
Hex 3/16 A. F.
AEP P/N
7003-1572-0XX*
AEP P/N
7003-1542-0XX*
Right Angle Bulkhead Mounted Cable Jacks (.125" max panel thickness)
Crimp type for flexible cable
Solder type for semi-rigid cable
.570
.570
.492
.386
.140 dia.§
.156 Cube
.126§
.492
.386
.140 dia.§
.156 Cube
.126§
.330
.252
.174
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
AEP P/N
7106-1521-0XX*
.322
.244
.166
AEP P/N
7106-1561-0XX*
*Substitute the appropriate cable group number for “XX” when ordering:
GROUP
02
03
CABLE TYPES
RG178, RG196, M17/93, M17/169
RG174, RG179, RG316, M17/113,
M17/119, M17/172, M17/189
GROUP
05
10
11
CABLE TYPES
RG178DS, RG196DS
.085" semi-rigid, RG405, M17/133
.047" semi-rigid, M17/151
GROUP
19
21
CABLE TYPES
RG174DS, RG316DS, M17/151,
M17/152, Times RD-316
.056" semi-rigid
Cable assembly instructions are shipped with each connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
21
SSMC Bulkhead Mounted Receptacles
Straight Bulkhead Jack Receptacles (.093" max panel thickness)
Rear mount
Front mount
.51
.51
.150
.360
.126§
.080
.150
.260
.126§
.080
.036 dia.
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
.140 dia.§
.036 dia.
.020 dia.
Hex 5/32 A. F.
Hex 3/16 A. F.
.020 dia.
Hex 5/32 A. F.
Hex 3/16 A. F.
AEP P/N
7004-1512-000
§ Recommended
mounting hole size,
tolerance +.003, -.000
AEP P/N
7119-1512-000
Right Angle Bulkhead Receptacles (.093" max panel thickness)
Jack type
Plug type
.384
.306
.126§
.227
.143
.150
.126§
.227
.143
Hex 5/32 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 3/16 A. F.
.140 dia.§
.180 dia.
.156 sq.
.48
.020 dia.
.430
.352
.140 dia.§
.48
.150
Hex 3/16 A. F.
.020 dia.
.080
.036 dia.
.156 sq.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.080
.036 dia.
AEP P/N
7012-1511-000
AEP P/N
7040-1511-000
Straight Bulkhead Plug Receptacle
Front mount (.093"max panel thickness)
.57
.28
.080
.150
.126§
.036 dia.
.140 dia.§
.180 dia.
.020 dia.
Hex 5/32 A. F.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
Hex 3/16 A. F.
AEP P/N
7017-1512-000
§ Recommended
mounting hole size,
tolerance +.003, -.000
www.aep.us • [email protected]
22
SSMC P.C. Board Receptacles
Straight P.C. Board Receptacles
Standard legs
Standoff legs
.020 sq. (typ.)
.419
.020 sq. (typ.)
.419
.156 sq.
.026
dia.
.156 sq.
LEG FINISH
GOLD
.100 (typ.)
.026 dia.
.155
.264
AEP P/N
7009-1511-000
LEG FINISH
PRETINNED
.135
.284
AEP P/N
7009-1511-040
LEG FINISH
GOLD
AEP P/N
7009-1511-050
Surface mount
.038 sq. (typ.)
LEG FINISH
PRETINNED
AEP P/N
7009-1511-041
Edge mount
.156 sq.
.289
.100 (typ.)
.419
.080
.031
(P.C. board
thickness)
.156 sq.
.020 (typ.)
.264
.026 dia.
.025
LEG FINISH
GOLD
.155
.264
.038 (typ.)
LEG FINISH
GOLD
AEP P/N
7009-1511-004
AEP P/N
7009-1511-005
.026 dia.
LEG FINISH
PRETINNED
AEP P/N
7009-1511-061
Right Angle P.C. Board Receptacles
Standard legs
Standoff legs
.384
.384
.156 sq.
.306
.156 sq.
.306
.026 dia.
.225
.141
.38
LEG FINISH
GOLD
AEP P/N
7010-1511-000
.020 sq.
(typ.)
.100 (typ.)
.155
.026 dia.
.135
LEG FINISH
PRETINNED
AEP P/N
7010-1511-040
LEG FINISH
GOLD
AEP P/N
7010-1511-050
LEG FINISH
PRETINNED
AEP P/N
7010-1511-041
Edge mount
.384
.384
.247
.163
.020 (typ.)
.306
.156 sq.
.306
.156 sq.
.225
.141
.026 dia.
.038 (typ.)
.080
LEG FINISH
GOLD
.020 sq.
(typ.)
.100 (typ.)
Surface mount
.025
.038 sq.
(typ.)
.245
.161
.38
AEP P/N
7010-1511-015
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.38
.155
LEG FINISH
GOLD
AEP P/N
7010-1511-060
www.aep.us • [email protected]
.031
.026 dia.
LEG FINISH
PRETINNED
(P.C. board
thickness)
AEP P/N
7010-1511-061
23
SSMC P.C. Board Receptacles
Straight Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)
Standard legs
.585
.140 dia.§
.430
.386
.020 sq. (typ.)
.156 sq.
.126§
§ Recommended
mounting hole size,
tolerance +.003, -.000
LEG FINISH
GOLD
PRETINNED
AEP P/N
7029-1511-000
7029-1511-012
LEG FINISH
GOLD
PRETINNED
AEP P/N
7029-1511-050
7029-1511-040
LEG FINISH
GOLD
AEP P/N
7029-1511-015
LEG FINISH
GOLD
PRETINNED
AEP P/N
7029-1511-060
7029-1511-061
.100 (typ.)
.026 dia.
.155
Hex 3/16 A. F.
Standoff legs
.585
.140 dia.§
.450
.386
.020 sq. (typ.)
.126§
§ Recommended
3
mounting hole size, Hex /16 A. F.
tolerance +.003, -.000
.135
.156 sq.
.026
dia.
.100 (typ.)
.038 sq. (typ.)
Surface mount
.140 dia.§
.455
.386
.156 sq.
.080
.126§
§ Recommended
3/
mounting hole size, Hex 16 A. F.
tolerance +.003, -.000
.026 dia.
.025
.038 (typ.)
Edge mount
.585
.140 dia.§
.430
.386
.031
.156 sq.
.126§
§ Recommended
3
mounting hole size, Hex /16 A. F.
tolerance +.003, -.000
(P.C. board
thickness)
.020 (typ.)
.155
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.026 dia.
www.aep.us • [email protected]
24
SSMC P.C. Board Receptacles
Right Angle Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)
Standard legs
.570
.492
.386
.140 dia.§
.156 sq.
.026 dia.
.126§
.225
.141
.38
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.155
LEG FINISH
GOLD
PRETINNED
AEP P/N
7110-1511-000
7110-1511-012
LEG FINISH
GOLD
PRETINNED
AEP P/N
7110-1511-050
7110-1511-040
LEG FINISH
GOLD
AEP P/N
7110-1511-015
LEG FINISH
GOLD
PRETINNED
AEP P/N
7110-1511-060
7110-1511-061
.020 sq.
(typ.)
.100 (typ.)
Standoff legs
.570
.492
.386
.140 dia.§
.156 sq.
.126§
.038 sq.
(typ.)
.245
.161 .38
Hex 3/16 A. F.
.100 (typ.)
§ Recommended
mounting hole size,
tolerance +.003, -.000
.020 sq.
(typ.)
.026 dia.
.135
Surface mount
.570
.492
.386
.140 dia.§
.156 sq.
.080
.126§
.247
.163
Hex 3/16 A. F.
.026 dia.
.038 (typ.)
§ Recommended
.025 mounting hole size, tolerance +.003, -.000
Edge mount
.570
.492
.386
.140 dia.§
.020 (typ.)
.126§
.156 sq.
.225
.141
Hex 3/16 A. F.
§ Recommended
mounting hole size,
tolerance +.003, -.000
.38
.155
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
.031
.026 dia.
(P.C. board
thickness)
www.aep.us • [email protected]
25
SSMC P.C. Board Receptacles
Straight Plug Type P.C. Board Receptacles
Standard legs
Standoff legs
.020 sq. (typ.)
.472
.020 sq. (typ.)
.472
.187
dia.
.026
dia.
Hex 5/32 A. F.
.317
LEG FINISH
GOLD
.187
dia.
.100 (typ.)
Hex 5/32 A. F.
.337
.155
AEP P/N
7025-1512-000
.026
dia.
LEG FINISH
PRETINNED
AEP P/N
7025-1512-012
LEG FINISH
GOLD
.038 sq. (typ.)
.135
AEP P/N
7025-1512-050
Surface mount
.100 (typ.)
LEG FINISH
PRETINNED
AEP P/N
7025-1512-040
Edge mount
.342
.031 (P.C. board thickness)
.472
.080
.187 dia.
.187 dia.
.020 (typ.)
Hex 5/32 A. F.
.317
.025
LEG FINISH
GOLD
Hex 5/32 A. F.
.317
.054 (typ.)
.026 dia.
LEG FINISH
GOLD
AEP P/N
7025-1512-015
.026 dia.
.155
AEP P/N
7025-1512-060
LEG FINISH
PRETINNED
AEP P/N
7025-1512-061
Right Angle Plug Type P.C. Board Receptacles
Standard legs
Standoff legs
.430
.430
.156 sq.
.352
.156 sq.
.352
.026 dia.
.225
.141
Hex 5/32 A. F.
.38
.100 (typ.)
.155
LEG FINISH
GOLD
AEP P/N
7042-1511-000
.020 sq.
(typ.)
Hex 5/32 A. F.
.038 sq.
(typ.)
.245
.161
.38
.020 sq.
(typ.)
.100 (typ.)
.026 dia.
.135
LEG FINISH
PRETINNED
AEP P/N
7042-1511-012
LEG FINISH
GOLD
Surface mount
AEP P/N
7042-1511-050
LEG FINISH
PRETINNED
AEP P/N
7042-1511-040
Edge mount
.430
.430
.020 (typ.)
.352
.156 sq.
.352
.156 sq.
.225
.247
.163
.026 dia.
.038 (typ.)
Hex 5/32 A. F.
.025
LEG FINISH
GOLD
.141
Hex 5/32 A. F.
.38
.031
.026 dia.
.155
(P.C. board
thickness)
.080
AEP P/N
7042-1511-015
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
LEG FINISH
GOLD
AEP P/N
7042-1511-060
www.aep.us • [email protected]
LEG FINISH
PRETINNED
AEP P/N
7042-1511-061
26
SSMC Receptacles and Adapters
Straight Panel Jack Receptacle (Stainless steel bodies)
4-hole flange
.500
.125
2-hole flange
.500
.125
.164 (typ.)
.065
.140
.065
.026 dia.
.026 dia.
.362
.232
.281 sq.
.017 dia.
.017 dia.
.084 dia.
.067 dia. (typ.)
.375
.375
.035
AEP P/N
7198-1513-000
.067 dia. (typ.)
AEP P/N
7100-1513-000
Bulkhead Mounted Adapters
SSMC jack to SSMC jack
SSMC jack to SSMB jack
.62
.126§
.62
.126§
.220
.360
.140 dia.§
§ Recommended
mounting hole size,
tolerance +.003, -.000
.360
.200
.140 dia.§
Hex 3/16 A. F.
Hex 5/32 A. F.
AEP P/N
7122-1502-000
§ Recommended
mounting hole size,
tolerance +.003, -.000
Hex 3/16 A. F.
Hex 5/32 A. F.
AEP P/N
7022-1502-000
Adapters Between Series
N plug to SSMC jack
SMA plug to SSMC jack
1.22
.78
AEP P/N
5013-1503-000
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
AEP P/N
5938-1503-000
www.aep.us • [email protected]
27
P.C. Board Cable Terminations
Straight P.C. Board Cable Terminations
Standard legs
Standoff legs
.020 sq. (typ.)
.45
.020 sq. (typ.)
.45
.156 sq.
.026
dia.
.156 sq.
.100 (typ.)
.155
.294
LEG FINISH
AEP P/N
GOLD
7146-1521-0XX
.135
.314
.026 dia.
LEG FINISH
AEP P/N
PRETINNED 7146-1521-1XX
LEG FINISH
AEP P/N
GOLD
7146-1521-2XX
.45
.031
Edge mount
.020 (typ.)
.155
.294
.038 sq. (typ.)
LEG FINISH
AEP P/N
PRETINNED 7146-1521-3XX
LEG FINISH
AEP P/N
GOLD
7146-1521-4XX
PRETINNED 7146-1521-5XX
(P.C. board
thickness)
.156 sq.
.100 (typ.)
.026 dia.
Right Angle P.C. Board Cable Terminations
Standard legs
Standoff legs
.370
.370
.156 sq.
.292
.156 sq.
.292
.026 dia.
.038 sq. (typ.)
.225
.141
.245
.161
.38
.020 sq. (typ.)
.38
.020 sq. (typ.)
.100 (typ.)
.100 (typ.)
.026 dia.
.155
.135
LEG FINISH
AEP P/N
GOLD
7145-1521-0XX
LEG FINISH
AEP P/N
PRETINNED 7145-1521-1XX
LEG FINISH
AEP P/N
GOLD
7145-1521-2XX
Surface mount
LEG FINISH
AEP P/N
PRETINNED 7145-1521-3XX
Edge mount
.370
.370
.020 (typ.)
.292
.156 sq.
.292
.156 sq.
.225
.025
.247
.163
.141
.026 dia.
.038 (typ.)
.031
.026 dia.
.155
.080
LEG FINISH
AEP P/N
GOLD
7145-1521-6XX
.38
LEG FINISH
AEP P/N
GOLD
7145-1521-4XX
(P.C. board
thickness)
LEG FINISH
AEP P/N
PRETINNED 7145-1521-5XX
*Substitute the appropriate cable group number for “XX” when ordering:
GROUP
02
03
CABLE TYPES
RG178, RG196, M17/93, M17/169
RG174, RG179, RG316, M17/113,
M17/119, M17/172, M17/189
GROUP
05
10
11
CABLE TYPES
RG178DS, RG196DS
.085" semi-rigid, RG405, M17/133
.047" semi-rigid, M17/151
GROUP
19
21
CABLE TYPES
RG174DS, RG316DS, M17/151,
M17/152, Times RD-316
.056" semi-rigid
Cable assembly instructions are shipped with each connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
28
Assembly Tooling
Crimp Tool
TA-0105
DESCRIPTION
Crimp tool with .105" and .128" hex dies
AEP P/N
TA-0105
Torque Wrench
TA-0432
DESCRIPTION
Torque wrench with 5/32" jaws for SSMC
plug coupling nuts and straight connector
backnuts; 30 inch-ounces torque
AEP P/N
TA-0432
Capping Tool
CP-17
DESCRIPTION
Capping tool (arbor press) with bases
for SSMB/SSMC/SSLB right angle cable
plugs and jacks
AEP P/N
CP-17
Cable assembly instructions are shipped with each cable connector.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
29
Index by Part Number
(Click on any line to jump to the page)
P/N
Page
5011-1503-000 . . . . . . . . . 14
5013-1503-000 . . . . . . . . . 27
5937-1503-000 . . . . . . . . . 14
5938-1503-000 . . . . . . . . . 27
7002-1542-0XX* . . . . . . . . 20
7002-1572-0XX* . . . . . . . . 20
7003-1542-0XX* . . . . . . . . 21
7003-1572-0XX* . . . . . . . . 21
7004-1512-000 . . . . . . . . . 22
7009-1511-000 . . . . . . . . . 23
7009-1511-004 . . . . . . . . . 23
7009-1511-005 . . . . . . . . . 23
7009-1511-040 . . . . . . . . . 23
7009-1511-041 . . . . . . . . . 23
7009-1511-050 . . . . . . . . . 23
7009-1511-061 . . . . . . . . . 23
7010-1511-000 . . . . . . . . . 23
7010-1511-015 . . . . . . . . . 23
7010-1511-040 . . . . . . . . . 23
7010-1511-041 . . . . . . . . . 23
7010-1511-050 . . . . . . . . . 23
7010-1511-060 . . . . . . . . . 23
7010-1511-061 . . . . . . . . . 23
7012-1511-000 . . . . . . . . . 22
7017-1512-000 . . . . . . . . . 22
7022-1502-000 . . . . . . 14, 25
7025-1512-000 . . . . . . . . . 26
7025-1512-012 . . . . . . . . . 26
7025-1512-015 . . . . . . . . . 26
7025-1512-040 . . . . . . . . . 26
7025-1512-050 . . . . . . . . . 26
7025-1512-060 . . . . . . . . . 26
7025-1512-061 . . . . . . . . . 26
7029-1511-000 . . . . . . . . . 24
7029-1511-012 . . . . . . . . . 24
7029-1511-015 . . . . . . . . . 24
7029-1511-040 . . . . . . . . . 24
7029-1511-050 . . . . . . . . . 24
7029-1511-060 . . . . . . . . . 24
7029-1511-061 . . . . . . . . . 24
7040-1511-000 . . . . . . . . . 22
7042-1511-000 . . . . . . . . . 26
7042-1511-012 . . . . . . . . . 26
7042-1511-015 . . . . . . . . . 26
7042-1511-040 . . . . . . . . . 26
7042-1511-050 . . . . . . . . . 26
7042-1511-060 . . . . . . . . . 26
7042-1511-061 . . . . . . . . . 26
7100-1513-000 . . . . . . . . . 27
7101-1541-0XX* . . . . . . . . 20
7101-1571-0XX* . . . . . . . . 20
7105-1521-0XX* . . . . . . . . 20
7105-1561-0XX* . . . . . . . . 20
7106-1521-0XX* . . . . . . . . 21
7106-1561-0XX* . . . . . . . . 21
7110-1511-000 . . . . . . . . . 25
7110-1511-012 . . . . . . . . . 25
7110-1511-015 . . . . . . . . . 25
7110-1511-040 . . . . . . . . . 25
7110-1511-050 . . . . . . . . . 25
7110-1511-060 . . . . . . . . . 25
7110-1511-061 . . . . . . . . . 25
7119-1512-000 . . . . . . . . . 22
7122-1502-000 . . . . . . . . . 27
P/N
7141-1521-0XX* .
7141-1561-0XX* .
7145-1521-0XX .
7145-1521-1XX .
7145-1521-2XX .
7145-1521-3XX .
7145-1521-4XX .
7145-1521-5XX .
7145-1521-6XX .
7146-1521-0XX .
7146-1521-1XX .
7146-1521-2XX .
7146-1521-3XX .
7146-1521-4XX .
7146-1521-5XX .
7198-1513-000 . .
7201-1541-0XX*
7201-1571-0XX*
7202-1542-0XX*
7202-1572-0XX*
7203-1541-0XX*
7203-1571-0XX*
7204-1511-000 . .
7209-1511-000 . .
7209-1511-011 . .
7209-1511-012 . .
7209-1511-015 . .
7209-1511-023 . .
7209-1511-040 . .
7209-1511-061 . .
7210-1511-000 . .
7210-1511-012 . .
7210-1511-015 . .
7210-1511-040 . .
7210-1511-050 . .
7210-1511-060 . .
7210-1511-061 . .
7212-1511-000 . .
7217-1512-000 . .
7219-1511-000 . .
7222-1501-000 . .
7225-1512-000 . .
7225-1512-012 . .
7225-1512-015 . .
7225-1512-040 . .
7225-1512-050 . .
7225-1512-060 . .
7225-1512-061 . .
7229-1511-000 . .
7229-1511-012 . .
7229-1511-015 . .
7229-1511-040 . .
7229-1511-050 . .
7229-1511-060 . .
7229-1511-061 . .
7240-1511-000 . .
7242-1511-000 . .
7242-1511-012 . .
7242-1511-015 . .
7242-1511-040 . .
7242-1511-050 . .
7242-1511-060 . .
7242-1511-061 . .
7302-1542-0XX* .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Page
. . 21
. . 21
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 28
. . 27
. . . 7
. . . 7
. . . 7
. . . 7
. . . 8
. . . 8
. . . 9
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . 10
. . . 9
. . . 9
. . . 9
. . 14
. . 13
. . 13
. . 13
. . 13
. . 13
. . 13
. . 13
. . 11
. . 11
. . 11
. . 11
. . 11
. . 11
. . 11
. . . 9
. . 13
. . 13
. . 13
. . 13
. . 13
. . 13
. . 13
. . 15
P/N
7302-1572-0XX* .
7303-1541-0XX* .
7303-1571-0XX* .
7304-1511-000 . .
7305-1521-0XX* .
7305-1561-0XX* .
7309-1511-000 . .
7309-1511-012 . .
7309-1511-015 . .
7309-1511-040 . .
7309-1511-050 . .
7309-1511-060 . .
7309-1511-061 . .
7310-1511-000 . .
7310-1511-012 . .
7310-1511-015 . .
7310-1511-040 . .
7310-1511-050 . .
7310-1511-060 . .
7310-1511-061 . .
7312-1511-000 . .
7317-1512-000 . .
7325-1512-000 . .
7325-1512-012 . .
7325-1512-015 . .
7325-1512-040 . .
7325-1512-050 . .
7325-1512-060 . .
7325-1512-061 . .
7332-1572-0XX* .
7332-1572-3XX* .
7335-1521-0XX* .
7335-1521-3XX* .
7340-1511-000 . .
7341-1521-0XX* .
7341-1561-0XX* .
7342-1511-000 . .
7342-1511-012 . .
7342-1511-015 . .
7342-1511-040 . .
7342-1511-050 . .
7342-1511-060 . .
7342-1511-061 . .
7396-1512-000 . .
7405-1521-0XX*
7405-1561-0XX*
7406-1521-0XX*
7406-1561-0XX*
7410-1511-000 . .
7410-1511-012 . .
7410-1511-015 . .
7410-1511-040 . .
7410-1511-050 . .
7410-1511-060 . .
7410-1511-061 . .
7441-1521-0XX*
7441-1561-0XX*
7496-1512-000 . .
7498-1513-000 . .
7499-1513-000 . .
CP-17 . . . . . . . .
TA - 0 1 0 5 . . . . . .
TA - 0 4 3 2 . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Page
. . 15
. . 16
. . 16
. . 17
. . 15
. . 15
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 18
. . 17
. . 17
. . 19
. . 19
. . 19
. . 19
. . 19
. . 19
. . 19
. . 16
. . 16
. . 16
. . 16
. . 17
. . 15
. . 15
. . 19
. . 19
. . 19
. . 19
. . 19
. . 19
. . 19
. . 17
. . . 7
. . . 7
. . . 8
. . . 8
. . 12
. . 12
. . 12
. . 12
. . 12
. . 12
. . 12
. . . 8
. . . 8
. . . 9
. . 14
. . 14
. . 29
. . 29
. . 29
* Indicates cable connectors with various types on specified page.
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
www.aep.us • [email protected]
30
About AEP
Since our foundation in 1973, our goal has
been to tailor our equipment and processes
toward satisfying customer and market
demand, no matter how circumstances change.
To that end, our modern plant, with recent
expansion, provides vertically-integrated
machining, assembly, and testing to ensure the
product quality and on-time delivery that have
always been our hallmark.
“Continuous Improvement Equals Customer
Satisfaction” is not just a slogan; we believe
it’s the best and only way to do business.
Other AEP Products
APPLIED ENGINEERING PRODUCTS
104 John W. Murphy Drive • P.O. Box 510 • New Haven, CT 06513
(203) 776-2813 • FAX (203) 776-8294 • www.aep.us • e-mail: [email protected]
31
Catalog # 127-7pdf Rev.2 8/05
The connectors in this brochure are only part of our complete line of coaxial connectors and cable assemblies, including:
• SMA • SMB • SMC • SMP • SSMA • SLB (Slide-on version of SMB) • MCX • MMCX • 75Ω Miniature SMB
• 75Ω Snap-on mating • 75Ω Screw-on mating • Adapters within and between series • Waterproof connectors
• Flexible cable assemblies • Semi-rigid cable assemblies
• And over 100 styles of MIL-PRF-39012 QPL connectors
in series SMA, SMB, and SMC.