pergl of binghamton - Pergl Gas Pump Globes

Transcription

PERGL OF BINGHAMTON
Newly added line for phone orders (607) 693-1942
If Busy (607) 775-0137
Hours: Monday - Thursday 9 a.m. - 4 p.m. Eastern Time
Fax Orders (607) 693-1941 — 7 Days - 24 Hours
www.perglgaspumpglobes.com
E-Mail: [email protected]
GULF
BRANDED PRODUCTS
AND OTHER
SUPPORT ITEMS FOR
YOUR PETROLIANA HOBBY
ADVERTISING GLOBES — $95.00 each
Two 13 1/2” glass faces and a plastic body. Plastic bodies are available in
white, dark blue, black, or orange. These globes are newly manufactured
and have a 6” fitter.
10" ADVERTISING GLOBES with Glass Bodies — $175.00 each
Two 10” glass faces on a narrow glass body. This globe is ideal for that
smaller than standard size gas pump or Air Meter. Measures only 13”
high, with a 4” fitter
(
MINI GLOBES (HALF SCALE) — $60.00 each
Approximately 8” tall, one piece glass globes with logos fired on, and
have a 3” fitter.
Call
607-693-1942 Monday - Thursday 9 a.m. - 4 p.m. ET for service.
Page 1
WALL SCONCES AND LAMP BASES
Shown with globe in place. Globe purchased separately.
WALL SCONCES
Cast Aluminium. May be used as shown or inverted. Ready to wire with all components and instruction sheet included.
Full size - to display your 131/2" globe with a 6" fitter ..................................................... $160.00 each
Mini size - to display your mini globe
with a 3" fitter ...............$110.00 each
LAMP BASES - Walnut finished with polished aluminum globe holder. Electric lead has line switch for easy on-off.
Wiring UL approved.
With 6" holder for full sized globe ................................................... $50.00 each
With a 6” fitter.
With 3" holder for mini globe ................ $45.00 each
With a 3” fitter.
Actual lamp base may vary slightly in appearance from photo above.
Call
Page 2
AD GLASS panels — $18 EACH
Size and availability shown below ad glass
Sizes 1, 2, 3, 4, 5, 7, 8, 9, 10, 11 & 12
AND ON THIS SIZE USAGE CHART
SIZE
SIZE 1
SIZE 2
SIZE 3
SIZE 4
SIZE 5
SIZE 7
SIZE 8
SIZE 9
SIZE 10
SIZE 11
SIZE 12
14
USAGE
34
3 / " x 10 / " curved with rounded corners ............................................... Used for Bennett 900 & 1000 Series pumps only.
31/2 " x 101/8 " curved with rounded corners ................................................ Used for Tokheim late Model 39 and 300 Series.
41/4" x 101/4" Flat with chamfered corners .......................................Used for Wayne Model 70 side glasses and Model 100.
43/4 " x 103/4 " Flat .................................................. Used for all Bennetts (except Series 900 & 1000) and Wayne Model 60.
33/8 " x 113/4 " Flat with square corners .................................................. Used for Wayne Model 500 and 600 Series pumps.
5 " x 97/8 " Flat ....................................................................................................... Used for Tokheim Model 36 side glasses.
5 " x 101/4 " Flat ..................................................................................................... Used for Tokheim Model 39 side glasses.
5 " x 113/4 " Flat ........................................................................................................................... Used for most Erie pumps.
5 " x 121/4 " Flat .................................. Used for most Gilbarco pumps and Tokheim Models 36 & 39 front and rear glasses.
5 " x 125/8 " Flat with chamfered corners ...................................................Used for Wayne Model 70 front and rear glasses.
5" x 125/8 " Flat ........................................................................................................................Used for most Bowser pumps.
PORCELAIN SIGNS — PUMPS AND NOVELTY
DECALS - VINYL
PRICES VARY BASED ON SIZE
SIZE
12”
SIZE
12”
6”
3”
Call
12” DIAMETER — $22
SIZE
11 1/4” X 8 3/4”
Page 3
GAS PUMP METER WINDOWS AND METER WINDOW KITS
#W101
#W102
#W105
#W104
#W101
#W102
#W103
#W104
#W105
#W103
Bennett Curved Window for 900 and 1000 Series Pumps ........................................$25.00 each or 2 for $45.00
— Approximately 97/8 " x 155/8 "
Tokheim Curved Window for Model 300 Pumps and
National A62 Pumps With Curved Windows .............................................................$25.00 each or 2 for $45.00
— Approximately 103/4 " x 14 "
Tokheim Model 39 Flat Window Kit with Rounded Corners, Rubber Included ..........$27.00 each or 2 for $50.00
— FOR SHORT 39 ONLY — Approximately 97/8 " x 151/4 " This glass held in with rubber furnished.
***If your glass is held in with clamps, this window will not work.***
Wayne and Martin & Schwartz Model 80 Window Kit, Rubber Included ...................$27.00 each or 2 for $50.00
Wayne Model 90 Window Kit, Rubber Included ........................................................$27.00 each or 2 for $50.00
G & B 1000 AND 1100 SERIES GAS PUMP METER WINDOWS
#W106
#W106
#W107
#W108
#W109
#W107
#W108
1100 Series
with "V"
#W109
Regular "Fired On" — approximately 17" x 22" .......................................................$75.00 each or 2 for $145.00
Premium "Fired On" — approximately 17" x 22" .....................................................$75.00 each or 2 for $145.00
No Logo "add your own" — approximately 17" x 22" ............................................ $60.00 each or 2 for $115.00
No Logo required — approximately 101/2 " x 22"......................................................$50.00 each or 2 for $95.00
TOKHEIM 400 SERIES GAS PUMP METER WINDOWS
Window opening size 111/2 " x 241/2 " ......................................$50.00 each or 2 for $95.00
G & B 1000 ,1100 AND TOKHEIM 400 SERIES GAS PUMP METER WINDOW RUBBER KITS
#R105 Kit for 17" x 22" Large G & B Window (above) .................................................................................. $16.00 each
#R102 Kit for 101/2 " x 22" Small G & B and Tokheim 400 Series (above) 7' R102 fits both................................. $13.00 each
Packing charge for windows .................................................................................................................................................$10.00
Call
Page 4
RUBBER FOR AD GLASS, METER WINDOWS AND DOORS
#R100 #R101
#R102
#R103
#R104
(Rubber cross sections are shown actual size)
#R100
#R101
#R102
#R103
#R104
#R105
#R106
#R107
#R108
#R105
#R107 #R108
#R106
Inner edge Ad Glass Housing Cover — Used on Wayne 500 & 600 Series .............................$1.50 per foot
Window and Ad Glass Channel — Used for 1930’s and 1940’s Pumps ...................................$1.50 per foot
Window and Ad Glass Rubber — Used on Tokheim 39 and 300 Models, and Erie..................$2.50 per foot
Window and Ad Glass Rubber — Used on Bennett 900 and 1000 Series Pumps ...................$2.50 per foot
Door Edge Rubber Kit — Used on Gilbarco 906 and 996 Models ........................................ $26.00 per door
Window Rubber — Used on Gilbarco 96, 98, 906 and 996 Models .........................................$2.50 per foot
Door Edge Rubber Kit — Used on Martin & Schwartz Model 80 and
Wayne Models 80 and 90. Supplied With Special Wide Flange Pop Rivets ......................... $24.00 per door
Door Edge Rubber Kit — Used on Gilbarco 96 and 98 Models (2 doors) ...........................$50.00 per pump
Door Edge Rubber Kit — Used on 60’s Gilbarco 1000 Series.............................................. $24.00 per door
Visible Pump I.D. Tags
GILBERT & BARKER — $15.00 each
WAYNE - brass — $20.00 each
G & B - script - stainless — $30.00 each
brass — $20.00 each
GILBERT & BARKER — $15.00 each
FRY – brass –– $20.00 each
Electric Pump I.D. Tags
BENNETT — $15.00 each
UNDERWRITERS TAG
$20.00 each
Call
I.D. Tag
Fastener Kit
4 special head
screws, 4 each
lockwashers & nuts.
Stainless Steel — $3.00/PKG
ERIE — $15.00 each
NATIONAL — $15.00 each
TOKHEIM - flat edge — $15.00 each
TOKHEIM - raised edge — $15.00 each
WAYNE - cut — $15.00 each
WAYNE - mod — $15.00 each
WAYNE / M&S – mod
- brass — $15.00 each
ERIE - brass — $15.00 each
ECO - air hydrant —
$15.00 each
Page 5
ELECTRICAL SOCKETS — Porcelain
— These sockets have the required 1/2" pipe thread
connector to fit the existing conduit in your old gas
pump. ........................................................ $7.00 each
A
B
C
D
E
F
G
H
I
J
A
B
Call
GLOBE HOLDERS
A — BENNETT — Models 600, 700, 900 and 1000 series.
Exact reproduction stamped steel ring. With clamps and
hardware. No drilling ............................... $35.00 each
B — GLOBE HOLDER –– UNIVERSAL - 4"
Cast aluminum (not polished), fits most 30’s thru 60’s
pumps. Mounting requires drilling ........... $20.00 each
C — GLOBE HOLDER — UNIVERSAL - 7"
Cast aluminum, fits most 30’s thru 60’s pumps. Mounting
requires drilling........................................ $40.00 each
D — GLOBE HOLDER — UNIVERSAL - 6"
Cast aluminum (polished), fits most 30’s thru 60’s pumps.
Mounting requires drilling ......................... $22.00 each
E –– GLOBE HOLDER –– GULF - 6"
Cast aluminum (polished), machined underside to “more
closely” fit stainless steel top Gulf pumps. Mounting
requires drilling........................................ $22.00 each
F — GLOBE HOLDER — MINI GLOBE
Cast aluminum (polished), fits our mini globe shown on
page 17 ................................................... $12.00 each
G — FRY “FLOWER POT”
Spun aluminum with all mounting and drain holes. Two
additional “side light holes” required by some pumps
are not drilled. ......................................... $50.00 each
H — WAYNE — Model 60
Cast aluminum, curvature on underside to fit top of
pump. Mounting requires drilling ............. $40.00 each
I — Cast aluminum (decorative), for “wide” Wayne 60 only.
Mounting requires some sheet metal modification on
top of pump ............................................ $60.00 each
J — ADAPTOR — 7" to 6"
Cast aluminum. Requires no drilling. Fits 7" globe base
to 6" holder. ............................................. $45.00 each
SCREW FITTER BASE — Copper
For globe bodies with screw threads in the fitter area.
A — Short style for canteen globe. Threaded size 5 1/8"
diameter, fitter size 6" diameter .............. $50.00 each
B — Long style for one piece Mobiloil Gargoyle globe.
Threaded size 51/8" diameter, fitter size 6" diameter.
.............................................................. $60.00 eachS
Page 6
ELECTRIC PUMP RESET HANDLES — REPRODUCTIONS
A
Bennett 500 Series (not exact reproduction),
(chrome plated) .......................................................... A
Bennett Models 700, 900 and 1000 Series
(chrome plated) ......................................................... B
Bowser Model 575 and others .................................... C
Eco Model 90 Series (chrome plated) ........................ D
Erie Electrics (chrome plated) .................................... A
Gilbarco 96, 98 and 900 Series
(chrome plated) .......................................................... A
National Model A-38 (chrome plated) ......................... A
National Models 360 and A 62
(chrome plated) .......................................................... E
Tokheim Models 34, 36 & 36B
(cast alum., smooth, non-polished) ............................ F
Tokheim Model 39 and 300
(chrome plated) .......................................................... E
Wayne, Martin & Schwartz Model 80 Escutcheon
The spring loaded "ring" behind the reset handle
(chrome plated) ..........................................................G
Wayne, Martin & Schwartz Model 80
(chrome plated) .......................................................... H
Wayne Models 50, 60, 70, and 100
(cast alum., smooth, non-polished) .............................I
Wayne Models 400, 500 and 600 Series
(aluminum, smooth, non-polished) .............................J
B
D
C
E
F
H
G
J
I
$30.00 each
$30.00 each
$30.00 each
$30.00 each
$30.00 each
$30.00 each
$30.00 each
$30.00 each
$25.00 each
$30.00 each
$7.00 each
$30.00 each
$25.00 each
$30.00 each
VISIBLE PUMP HANDLES
Cast aluminum, no holes.
Shorter handle for Wayne 519 or 615,
221/2 " long ...............................................................$50.00 each
Longer handle (Universal) straight style,
281/2 " long ...............................................................$50.00 each
A
B
A — CAM LOCK SETS FOR YOUR 50’S PUMP
Two keys per lock, keyed alike.
Lock for one door...................................................... $7.00 each
B — PIPE BUSHING
34
/ " to 1" PLATED STEEL (not cast iron) ....................... $7.00 each
Call
Page 7
NOZZLES, HOSES, CABLE, CLAMP & ACCESSORIES
Banana Nozzles
Reproduction red brass Banana Nozzles (for your visible
pump). Available in two styles:
A — Side Tab Style
B — Hook Style
Both styles available with 1" internal pipe thread. Specify style
when ordering.
Either style ........................................................ $95.00 each
A
B
New Nozzles
C
D&E
F
C — 40’s and 50’s style ..................................... $80.00 each
Pump Hoses — Intended for decorative use only,
not for dispensing of fluids.
Black Rubber Hoses
11/8" diameter with 3/4" brass male pipe fittings on each end.
D — 6 foot hose (brass ends) ...................... $24.00 each
E — 6 foot hose (chrome ends) ................... $36.00 each
White Rubber Hose (easy to clean)
F — 11/2" diameter x 10 feet long, with 1" brass male pipe
fitting on each end .................................... $95.00 each
White Cloth Covered Hose (not shown)
— 13/8" diameter x 10 feet long, with 1" brass male pipe
fitting on each end ...................................$110.00 each
Hose Clamp, Retractor Cable & Cable Bushing
H
I
G
A
B
G — Hose Clamp - to secure retractor cable to
your black rubber hose ............................. $10.00 each
H –– Retractor Cable - plastic coated steel cable
10 feet long with crimped ends .................. $9.00 each
I –– Retractor Cable Bushing
1) Tokheim with 5/8" shank & keeper ........... $8.00 each
2) Tokheim with 7/8" shank & keeper ........... $8.00 each
3) Universal with 5/8" shank & keeper .......... $8.00 each
4) Universal with 7/8" shank .......................... $5.00 each
A — VISI-METER (SIGHT GLASS) — Intended for decorative purposes.
Cast Aluminum top and bottom with a 31/2" x 5" glass cylinder, housing a
spinner. The castings and rods are held together with brass acorn nuts.
Inlet and outlet holes are 1" N.P.T. Overall size approx. 5" dia. x 8" high,
primed. Made and assembled in America.............................. $160.00 each
B — VISI-METER (SIGHT GLASS) — Intended for decorative purposes,
Cast top and bottom with clear plastic cylinder, housing a spinner.
The castings and rods are held together with acorn nuts. Inlet and
outlet holes are 1" N.P.T. Overall size approx. 5" dia. x 8" high, with
top sign approx. 101/2" high. ............................................$140.00 each
THESE PRODUCTS ARE FOR DECORATIVE PURPOSES ONLY. NOT FOR THE DISPENSING OF FLUIDS.
Call
Page 8
ECO AIR METER ACCESSORIES
LIGHT KIT/GLOBE HOLDER
For your 90's series ECO Air Meter. Can be used with any of our mini
globes (sold separately). Shown with and without globe.
Cast Aluminum .....................................................................$55.00 each
ECO 90'S SERIES METER GLASS
Shown to the left and on air meter
above. Glass with AIR fired on
back side ....................$12.00 each
ECO - air meter tag
— $15.00 each —
Eco Model 90 Series
(chrome plated)
— $30.00 each —
FASTENERS AND SNAP RINGS
A
B
Original Brass Glass
Body Screws and Nuts
#4 x 9/16 long with
rubber washers.
12 pcs. ......... $3.00/pkg
Glass Body Screws
and Hex Nuts (Brass)
Newly manufactured #6
x ¾ long with rubber
washers.
12 pcs. .........$5.00/pkg
F
E
I.D. Tag Fastener Kit
(Stainless Steel) 4 each
special head screws,
lock washers & nuts.
12 pcs. ......... $3.00/pkg
Call
Meter Face Screws
8-36x1/2 long and plastic
washers.
8 pcs. ............ $4.00/pkg
C
Glass Body Screws
with Knurled Nuts
(Brass) Newly manufactured #6 x ¾ long with
rubber washers.
12 pcs. ........ $10.00/pkg
G
Bennett Door Bumpers
6 pcs (1 Door).
..................... $5.00/pkg
D
Porcelain Sign Fastener
Kit (Stainless steel)
4 stainless "typical style"
sheet metal screws.
8 pcs........... $3.00/pkg
H
H
Snap Rings
for Metal Bodies 15"
or 16 ½", please specify
................... $12.00/pair
Page 9

pergl of binghamton - Pergl Gas Pump Globes

Transcription

Similar documents