DOWNLOAD the catalogue of the association as a PDF file
Transcription
DOWNLOAD the catalogue of the association as a PDF file
CATALOGUE OF MEMBERS www.medtechnik.cz Organisation: ASSOCIATION OF MANUFACTURERS AND SUPPLIERS OF MEDICAL DEVICES Vinařská 6 603 00 Brno CZECH REPUBLIC tel./fax: +420 543 243 032 e-mail: [email protected] Introduction This catalogue of manufacturers and exporters of medical devices contains information of companies associated in the Association of Manufacturers and Suppliers of Medical Devices and their product range. A production of medical devices has a long tradition in the Czech Republic. Since 20th of the 20th century surgical instruments, x-rays, and other orthopaedic and rehabilitation devices have been manufactured in our country. A qualitative development started in 50th of the last century with electronics development. A production of ECG machines, sterilizers, ventilators, anaesthetic devices, laboratory devices and other products has started. As early as in those years our industry reached outstanding successes in the world. In 1958 we were awarded a gold medal for a cardiology defibrillator at the world exhibition in Brussels. Another world success was reached with a polarograph invention for which professor Heyrovsky was awarded the Nobel Prize. Engineering and electrical products have gradually been supplemented with products from plastics. Professor Wichterle has registered an invention of hydro gel contact lenses. Industry has started to produce disposable syringes and needles. Health care area continued its development and started to supply complicated technical systems such as central sterilizers, dental units, x-ray units, cobalt irradiator, lithotriptor etc. In 90th of the last century a transformation of the industry into market economy conditions took place in the Czech Republic. Today, the sector of medical devices represents a wide complex of various entrepreneurial subjects comprising of production, designer, business, and distribution companies. The Czech medical devices industry meets majority of key needs of health care facilities. Companies are able to supply products from surgical instruments, various types of hospital beds, sterilizers including central sterilisation, ventilators, anaesthetic devices, x-rays including panoramic x-rays, dental technique, ambulances, mobile hospitals, orthopaedic and rehabilitation devices, kitchen and laundry equipment, technical gases and their distribution, and other assortment. The medical devices industry in the Czech Republic is able to deliver complex supplies from a design to the equipment with technology products. Our goal is to implement best solution from the viewpoint of technical excellence, quality and cost effectiveness. A complex program meeting individual requirements of our customers from counselling , training to servicing is guaranteed. All our companies use quality assurance system ISO. Their products have CE mark. The aim of the catalogue is to inform health care workers of the possible product range for equipping their workplaces. More detailed information of individual companies together with prices of products can be obtained on given contact addresses. The catalogue of the Association of Manufacturers and Suppliers of Medical Devices can be found on the web pages www.medtechnik.cz. All the members of the Association have a link on their company web pages there so that detailed information of individual companies and their product ranges could be obtained this way too. JUDr. Jaroslav Kopeček Chairman of the Association of Manufacturers and Suppliers of Medical Devices List of companies A L ABNER a.s. ....................................................................................................... 09 AKC konstrukce, s.r.o. .................................................................................... 10 ALPA, a.s. ........................................................................................................... 11 APOS-AUTO, s.r.o. .......................................................................................... 12 ARIES, a.s ........................................................................................................... 13 AUDY s.r.o. ........................................................................................................ 14 LabMediaServis, s.r.o. ................................................................................... 57 Lasak, spol. s r.o. ........................................................................................... 58 Linet spol. s r.o. ............................................................................................... 59 B BEZNOSKA s.r.o. .............................................................................................. 15 Biomag CZ ........................................................................................................ 16 BIONIK Stapro Group s.r.o. ......................................................................... 17 BIOPHYS, spol. s r.o. ....................................................................................... 18 BLOCK a.s. ......................................................................................................... 19 BMT Medical Technology s.r.o. .................................................................... 20 BOCHEMIE a.s. ................................................................................................. 21 BORCAD cz s.r.o. ............................................................................................ 22 C CLINITEX CZ s.r.o. ............................................................................................. 23 Codaco Electronic s.r.o. ................................................................................. 24 CompuGroup Medical Česká republika s.r.o. ............................................ 25 D Daniševský, spol. s r.o. ................................................................................... 26 DELONG INSTRUMENTS a.s. ....................................................................... 27 DESSTER s.r.o. ................................................................................................. 28 DIPLOMAT DENTAL s.r.o. ............................................................................. 29 DN FORMED Brno s.r.o. ............................................................................... 30 DOMKAT, s.r.o. ................................................................................................. 31 M Martek Medical a.s., ....................................................................................... 60 MEDETRON s.r.o. .............................................................................................. 61 MEDIATRADE s.r.o. ......................................................................................... 62 MedFinance Megellan, s.r.o. ......................................................................... 63 Medical Fair Brno, , Rehaprotex ............................................................. 64 MEDICAL TECHNOLOGIES CZ a.s. .............................................................. 65 MEDILA s.r.o. ................................................................................................... 66 MEDIN, a.s. ...................................................................................................... 67 MEDIPO - ZT, s.r.o. ....................................................................................... 68 MEDIPROGRESS, spol. s r.o. ....................................................................... 69 MEDISET-CHIRONAX s.r.o. ........................................................................... 70 MEDKONSULT, s.r.o. ........................................................................................ 71 Merci, s.r.o. ....................................................................................................... 72 Miele, spol. s r.o. ........................................................................................... 73 MORAMEDICA SE .......................................................................................... 74 MTE spol. s r.o. ............................................................................................... 75 M.T.Z. s.r.o. ........................................................................................................ 76 MZ Liberec, a.s. ................................................................................................. 77 N NanoTrade s.r.o. ................................................................................................ 78 O ORTEX spol. s r.o. ........................................................................................... 79 E P EGO Zlín, spol. s r.o. ........................................................................................ 32 EKOVUK MEDI, s.r.o. ...................................................................................... 33 EKOM spol. s r.o. ............................................................................................ 34 ELLA-CS, s.r.o. .................................................................................................. 35 EMBITRON s.r.o. .............................................................................................. 36 eNZi.cz s.r.o. ..................................................................................................... 37 ERGON a.s. ....................................................................................................... 38 ERILENS s.r.o. ................................................................................................ 39 Parabel s.r.o. ..................................................................................................... 80 PATRON Bohemia a.s. .................................................................................... 81 Paultech s.r.o. .................................................................................................... 82 PD clean construction, s.r.o. .......................................................................... 83 Pharmdata s.r.o. ............................................................................................... 84 PROFIL NÁBYTEK, a.s. ..................................................................................... 85 ProSpon spol. s r.o. ......................................................................................... 86 PULSKLIMA spol. s r.o. .................................................................................... 87 PURO-KLIMA, a.s. ............................................................................................ 88 F FAVEA Europe, s.r.o. ........................................................................................ 40 FOMA BOHEMIA spol. s r.o. .......................................................................... 41 G R RADIX CZ, s.r.o. ............................................................................................... 89 ROYAX, s.r.o. .................................................................................................... 90 GEA Heat Exchangers a.s. ............................................................................ 42 S CH SIAD Czech spol. s r.o. .................................................................................. 91 Sicar spol. s r.o. ............................................................................................... 92 SIVAK medical technology s.r.o. .................................................................. 93 Speciální Medicínská Technologie, s.r.o. .................................................. 94 S&T Plus s.r.o ................................................................................................... 95 STROJÍRENSKÝ ZKUŠEBNÍ ÚSTAV, s. p. ................................................... 96 Synthesia, a.s. ................................................................................................. 97 CHEIRÓN a.s. .................................................................................................... 43 CHEMCOMEX Praha, a.s. .............................................................................. 44 Chirana Medical a.s. ...................................................................................... 45 CHIRASTAR KDT, s.r.o. ................................................................................... 46 CHIRMAX s.r.o. ............................................................................................... 47 CHIRONAX-DIZ spol. s r.o. ........................................................................... 48 I Ing. Jan Turek ................................................................................................... 49 ING corporation, spol. s r.o. ........................................................................ 50 INPARTNERS GROUP .................................................................................... 51 J JIVA - Jirák, spol. s r.o. ................................................................................ 52 K Klaro, spol. s r.o. .............................................................................................. 53 Klášterní officína ........................................................................................... 54 Komora zubních techniků ČR .................................................................... 55 KOVONAX spol. s r.o. ..................................................................................... 56 T Trystom, spol. s r.o. ......................................................................................... 98 TSE spol. s r.o. .................................................................................................. 99 Textilní zkušební ústav, s. p. ........................................................................ 100 U UJP PRAHA a.s. ............................................................................................... 101 V VIACELL s.r.o. .................................................................................................... 102 VITAPUR, Vlasta Veselíková .......................................................................... 103 Z Zdeněk Holomý Electronics ........................................................................... 104 ZES Brno, a.s. ................................................................................................. 105 ZPT Vigantice spol. s r.o. .............................................................................. 106 ABNER a.s. Headquarters: Vaclavske nam. 56, CZ 110 00 Prague 1 Plant, sales, warehouse: Lanskrounska 87, CZ 571 01 Moravska Trebova tel.: +420 461 313 111, fax:+420 461 313 171 e-mail: [email protected] www.abner.eu History End of 19th century – History of ABNER a.s. dates back to 1880 when there was silversmith workshop established and began manufacture of trays, powder compacts, cigarette cases, boxes and cutlery. In the later period developing of production is firmly attached to the name BIBUS. • 1981 – beginning of production of stainless steel equipment for hospital catering – stainless steel tray systems and transport trolleys. • 1993 – ABNER Ltd. was established. • 1994 – extension of pressure cartridges production. • 1997 – company certified according to ISO 9002/1994 by BVQI. • 1999 – transformation from limited company to joint-stock company ABNER a.s. • 2010 – beginning of production of insulated tray system with active heating. Products Our production programme is focused on catering equipment made of stainless steel – wide range of transport and manipulation trolleys, trolleys with heating or cooling, etc. Our products ensure modern way of distribution and transport of meals in kitchens, canteens, hospitals, nursery homes, homes for the elderly. Isothermal tray system THERMOLINE® The THERMOLINE® tray system was specially developed for cook & serve catering. Great attention has been given to the new requirements in the field of hygiene. The result is a user-friendly system which maintains an optimum temperature. The heating system of the THERMOLINE® system has been adjusted to a food temperature of 65° to 75°C. Each heating zone is regulated individually by means of a temperature sensor. This automatic heating system guarantees an even target temperature of all foods using the lowest power consumption. The heating module is covered with a lid made of polypropylene with PUR foam core. In this way an optimum insulation for hot foods is achieved and heat transfer to cold foods is prevented. Both the heating module and the lid are fully dishwasher proof. Variations of tablet THERMOLINE® : - tablet THERMOLINE® A1 – active heating of plate with main meal only - tablet THERMOLINE® A2 – active heating of plate main meal and bowl with soup - tablet TERMOLINE® Passive – neutral version where pre-heated china ware is being used only Active-Tray isothermal tray system In the Active-Tray distribution system, hot meals are heated individually and covered with insulated domes. This provides a thermal separation between hot and cold components and allows individual meals to be heated as required, e.g. only the porridge for breakfast or only the soup for supper.The Active-Tray system can be used with traditional ward trolleys but also with a docking station and transfer cart. During regeneration, the heating system does not heat the entire ward trolley, but channels the energy directly to the hot meals of each individual tray. 9 CONTACTS AKC konstrukce, s.r.o. AKC konstrukce, s.r.o, Pivovarská 10, CZ 756 61, Rožnov pod Radhoštěm tel.: +420 571 620 771, fax: +420 571 649 011 e-mail: [email protected] www.akcmed.com Company AKC konstrukce is designing, manufacturing and installing built-in operating theatres under the brand AKCmed. Part of the product range is also touch screen control panel for operating theatres. AKC konstrukce is also distributing products (metal furniture) of company BLANCO on Czech and Slovak market. Built-in operating theatres AKCmed AKCmed - ideal solution for: • building of new operating theatres and their backgrounds • reconstruction of existing spaces AKCmed advantages: • flexibility for future • resistant surface • modern solution • easy maintenance • fully certified system • worldwide experience • conformity with EU standards Touch screen control panel AKCmed The only one on the market enables intuitive control of all functions needed for operating theatres operation. Thanks to simple software adjustment enable to additionally adjust its functions. All is shown and controlled on 19“control panel. Complete solution is set up with best components available on the world market. Diagnosis over the internet is possible. 10 CONTACTS ALPA, a.s. ALPA, a.s., Hornoměstská 378, CZ 594 25 Velké Meziříčí tel.: +420 566 521 401-3, fax: +420 566 521 669 e-mail: [email protected] www.alpa.cz Tradition with the ALPA trade mark The history of the ALPA company is the history of a steady and prosperous company. The popularity of ALPA products has lasted for decades. After the second world war when the production was based in Brno the company moved to the town of Velké Meziříčí. In 1994 the company was privatised and up to the present date it is a modern and forward thinking company. The main assets the ALPA brand takes pride in are the ownership of the Czech trade mark and almost 100 years lasting satisfaction of their customers. In 2004 the company has been awarded with the ISO 9001 and ISO 14001 certificates. At present the ALPA company manufactures cosmetics, especially the ALPA embrocation and products designated for massage – emulsions, gels and creams based on ALPA embrocation, foot treatment products, hair products and baby and infant lotions and powders. All the products are presented on the company web sites www.alpa.cz. Taking into account the very good acceptance of these products, the company management decided to commence production of a certain type of gel as a medical device using the relax-el® trade name. This is made in three differing types – containing menthol, clove extract and chestnut extract. The intended function of relax-el® applied on the skin is supported by the effect of agents contained in the relax-el® medical device. At the beginning of 2006 this medical device has been approved and registered by the Czech Ministry of Health (under its original name ALPAGEL) and the ALPA company endeavours to supply the market place with the highest quality standard of these products. 11 CONTACTS APOS-AUTO, s.r.o. - divize elektro APOS-AUTO, s.r.o., Pražská 7, č.p. 1602, CZ 678 49 Blansko tel.: +420 516 426 822, fax: +420 516 426 888 e-mail: [email protected] CONTACTS www.apos-auto.cz Our products and services Advanced Medical Solutions s.r.o. develops and commercializes non-invasive diagnostic products and services to private clinics, individual expert doctors, physiotherapists and the general public for home medicine and telemedicine. Competitive advantage and difference The core competitive advantage and difference to other solutions existing on the market lies in the capability to diagnose cardiovascular risk factors, peripheral perfusion and related organ function and perfusion using one integrated and automated system designed to be used by non-expert personnel including patients themselves. Product status The products have been successfully selected by major private clinics and are operated both directly and in the telmedical mode. All products are completely non-invasive and the diagnostics is focused on the following areas: • Heart rate • Pulse wave • Peripheral perfusion • Perfusion and related function of individual organs The solution is commercialized in the following way: a) Integrated cardiovascular laboratory for expert doctors in cardiology and angiology b) Integrated evaluation laboratory for physiotherapy c) Telemedical solution for remote expert advice and home monitoring Note: a) Integrated cardiovascular laboratory serves for the early detection of cardiovascular risk-based peripheral perfusion and pulse wave diagnostics and consists of the following components: - a portable diagnostic unit used as a wireless peripheral for a notebook, serviced by an assistant - portable ultrasound (notebook) b) Integrated evaluation laboratory for physiotherapy serves for screening and early detection of risks related to the cardiovascular system and overall health status in relation to training and therapy. The laboratory is based on peripheral and organ perfusion + pulse wave screening and consists of: - a portable diagnostic unit used in a cardiovascular lab - an optical system for detecting organ perfusion c) Telemedical solution serves for remote expert advice and remote monitoring The solution is designed for use by the patient in a natural environment outside the hospital or in remote areas. The modular platform enables the monitoring of parameters defined by the doctor or physiologist. The solution is fully compatible with a cellular phone. 12 ARIES, a.s. ARIES, a.s., CZ 512 33 Studenec 309 tel.: +420 481 595 111, fax: +420 481 595 481, mobile: +420 605 599 513 e-mail: [email protected] www.aries.eu Aries Company is a leading Czech manufacturer of fashion hosiery, medical compressive products of a brand Avicenum and sports compression products ROYAL BAY. Through its subsidiaries, Aries is also active in the Polish and Slovak markets and exports to a number of foreign markets. Thanks to own R & D Department and manufacturing process Aries is able to respond quickly to the individual needs of individual markets. Medical assortment Avicenum includes compression hosiery especially; in different compression classes: Avicenum 70 (prevention), Avicenum 140 and 310 (medical therapy support) and Avicenum 360 and 520 (medical therapy of edema, lymph edema and varicose veins). Production offer is extended by socks for diabetics (Avicenum DiaFit). Avicenum assortment is enriched with additional health benefits such as: medical hems, antimicrobial Sanitized® silver ions, moisturizing microcapsules Skintex® Anti-Heavy-Legs. Traditional Czech manufacturer of medical compression and sports compression products 13 CONTACTS AUDY s.r.o. AUDY s.r.o., Živného 1a, CZ 635 00 Brno tel.: +420 511 114 900, fax: +420 511 114 905 e-mail: [email protected] www.audy.cz The company AUDY s.r.o. is the Czech private company. It was established in Brno in 1990. The owner is Mr. Alois Audy. The strategic orientation of the company is the production, sale and service of medical, sanitary and rehabilitation equipment for disabled people. The company has long experience in this kind of heath and holds an exceptional position in the Czech Republic. It has exported successfully the major part of products in the other countries since 2001. The highest priority of firm is the top quality of products and services. Therefore products supplied by the company conform with the most demaging rules and requirements valid for medical devices. All products were awarded the CE Mark. Quality assurance: AUDY s.r.o. has been certified according to the ISO 9001:2009 standard for design, development, production, sale and maintenance service of health care applications, rehabilitation aids, health care furniture and equipment.Each AUDY‘s activity is being accomplished with a strict respect to the environment, which can be proven by a certificate according to the ISO 14001:2005 standard for Environmental Management System. The line of products: • Walkers • Grabrails, equipment to the bathroom • Transport wheelchairs • Commode chairs • Wooden care beds • Medical screens • Investigative deck-chairs • Multifuctional carts 14 CONTACTS BEZNOSKA s.r.o. BEZNOSKA s.r.o., Dělnická 2727, CZ 272 01 Kladno tel.: +420 312 660 670, fax: +420 312 662 464 e-mail: [email protected] www.beznoska.cz Beznoska Co. Ltd. has been formed by privatization process of part of Poldi Steelworks in 1992. This unit has been producing surgical instruments and implants for traumatology and orthopedics all ready since 1969. Since 1995 the company has been certified in accordance with ISO 9001 standards and since 2003 with ISO 13485:2003. IN the second case Beznoska was successfully certified by a Norwegian company “DNV”. Since 1998 our company has been authorized to use the mark of conformity “CE” in accordance with the European directive 93/42/EEC for the whole product’s assortment. This authorization has been awarded by “Notified Body” (NB 0434). Nowadays more than 3.000 surgical instruments and implants are included in the production assortment. There are instruments, implants and others surgical equipment for orthopedics, traumatology and bone surgery in general. According to the surgical use, we could divide the products to the rank for osteosynthesis use (bone joining) and to the rank for arthroplasty use (total joint replacements). The principle of the company development is continuou innovation. All development activities are running on the company frame . On the company development participate 11 constructors and technologists, who cooperate together on novelties from draft to the final design with medical experts from clinical research institutes. Consultation during the application of the product is a part of continuous improvement of the products quality and good services with Beznoska Company gives its customers. Beznoska Company also organized training and workshops where the surgeons could see new products. More than 40 years tradition of production and selling of the implants and instruments for orthopedics and traumatology is the guarantee of the highest quality and long-lasting lifespan of Beznoska’s products. • Total Hip Joint Replacements • Total Knee Joint Replacements • Shoulder Hemiarthroplasty • Tumorous Replacements • Revision Systems • Intramedullary Nailing • Plates and Screws • Instruments 15 CONTACTS Biomag CZ Biomag CZ, Průmyslová 1270, CZ 506 01 Jičín tel./fax: +420 493 691 697 e-mail: [email protected] www.magnetic-therapy-biomag.com Biomag® – development and production of pulsed magnetic therapy devices. Since 1991 The philosophy behind Biomag® is to produce high quality state-of-the-art products that help people during the rehabilitation process as well as in the prevention of health problems. Biomag magnetic therapy devices help both in health care facilities and home care. The new generation of Biomag magnetic therapy devices again pushes the standards in pulsed magnetic field therapy even higher. Thanks to the use of the most advanced technologies, new therapeutical Biomag magnetic therapy devices provide high efficiency combined with sophisticated and organized firmware layout that every member of medical staff will appreciate. Application of the pulsed Biomag magnetic therapy is thus even more convenient than before. Benefits of 3D Biomag pulsed magnetic therapy The human body consists of several billion living cells. These cells have a slight electrical potential around them. The Biomag pulsed magnetic field penetrates deep into the body and influences this electrical potential of the cells, stimulating them to become active. 3D Biomag pulsed magnetic therapy creates optimal conditions to accelerate healing, reduce pain and generally regenerate the body. Professionals from 20 countries worldwide use Biomag devices. Visit www.magnetic-therapy-biomag.com for your business opportunity. 1 2 3 1 2 3 1 2 3 16 CONTACTS BIONIK Stapro Group s.r.o. BIONIK Stapro Group s.r.o., Pernštýnské náměstí 51, CZ 530 02 Pardubice - Staré Město tel.: +420 466 303 139, fax +420 466 303 130 e-mail: [email protected] www.bionik.cz BIONIK has more than twenty years’ tradition. BIONIK was founded in 1990. As from 1. 9. 2013, its name was changed to BIONIK Stapro Group s.r.o. The goal of BIONIK Stapro Group s.r.o. is to act actively and directly in specific segments of medical equipment market, to react to continuous changes and to develop a product portfolio with efficiently focused service and support provided to all its customers in the medical technology market in the Czech Republic and in Slovakia. Our vision is to be a respected and reputable company. Our greatest satisfaction consists in returning health to people with the help of devices, instruments and implants delivered by us and used by the best physicians. WE HELP PROFESSIONALS in their immeasurable effort to HELP PEOPLE TO RETURN TO COMMON LIFE JOYS. The cornerstones of our product portfolio are: Mindray ultrasound devices Mindray is one of the leading suppliers of medical devices, occupying a top position worldwide in ultrasounds since it was founded in 1991. Fukuda Denshi devices Fukuda Denshi, a traditional Japanese company, has long years of experience with production of ECG devices. It offers a complete range of ECG products including models for ergometry. Its portfolio includes also ECG Holter and VaSera, the special device intended for early and efficient diagnostics of cardiovascular diseases. HOFER bone implants HOFER is a family-type company that was established in 1976 as a trade company acting on the medical market; since 2003, it has its own production and development. Offer of special bone implants aimed at small bone traumatology. ChM bone implants CHM was established in 1981. At present, the company is respected at international level and highly appreciated by producers and specialists on production and development of implants. Its portfolio consists of implants for long bone traumatology. RUDOLF surgical instruments for surgery RUDOLF Medical GmbH is a traditional family company with registered office in Tuttlingen area. It produces comprehensive instrumentarium for general surgery, endoscopy and comprehensive assemblies of endoscopic towers of RUDOLF Monolith series. RUDOLF Medical GmbH offers more than 50.000 instruments. Bionik surgical instruments for surgery Bionik Stapro Group s.r.o. offers a comprehensive range of surgical instruments presented under the BIONIK brand. 17 CONTACTS BIOPHYS, spol. s r.o. BIOPHYS, spol. s r.o., Převoznická 738/6, CZ 143 00 Praha 4 tel.: +420 244 400 896, fax: +420 241 770 680 e-mail: [email protected] www.biophys.cz Biophys was established in 1991 as a company specialized on delivering medical supplies to hospitals, health centres, laboratories, general practitioners’ and specialists’ practices, rehabilitation facilities, nursing homes, etc. The Company has the Integrated Management System (ISO 9001:2008, ISO 14001:2004) in place. Biophys is the leader of the exporting FIRST CZECH HEALTH ALLIANCE (FCHA) managed by CzechTrade, state agency for support to export. Within this Alliance we supply original systems for construction and reconstruction of medical and pharmaceutical facilities, operating theatres, intensive care units (ICUs), medical laboratories, pharmaceutical production lines, PET centres (for oncology); we deliver diagnostic and therapeutic devices for those facilities, we equip interiors with medical and office furniture, etc. Biophys is member of APP (Association for Consulting) and has established good business relationships with a number of teaching, regional, municipal and private hospitals, laboratories and general practitioners’ and specialists’ practices. Additionally to the above stated export activities, we are interested also in cooperation with manufacturers and suppliers of interesting products for health care who wish to distribute them in the Czech Republic and in Slovakia. • IVD Medical Devices • Furniture for Healtcare Facili es • Equipment for doctor’s offices 18 CONTACTS BLOCK a.s. BLOCK a.s., Stulíková 1392, CZ 198 00 Praha 9 Correspondence address: BLOCK a.s., U Kasáren 727, 757 01 Valašské Meziříčí, CZ tel.: +420 571 670 111, fax: +420 571 670 244, e-mail: [email protected] www.block.cz BLOCK® Joint Stock Company directs its attention since its establishment in 1991. Among the main spheres of activities are pharmacy and biotechnology, chemistry, laboratories, health service, electrical engineering and food processing industry. BLOCK® will ensure a complex delivery of construction and technological units beginning from their primary technical proposal, over elaboration of all needed levels of project documentation, till their realisation, putting into operation, measurements and tests, validations and guarantee and afterguarantee service. To realise any demanding constructions and technologies the company developed and innovates furthermore the complex systems fulfilling the most severe requirements in the rooms with stress on high quality of environment (called clean rooms). All systems are constructional variable and that is why they can be proposed and realised to satisfy maximally any client and user. For all systems we manufacture, we are in possession of valid certificates and attests on compliance of our products with requirements of European Union. On the top of it, our products are certified according to the regulations of Russian Federation as well. 19 CONTACTS BMT Medical Technology s.r.o. BMT Medical Technology s.r.o., Cejl 157/50, Zábrdovice, CZ 602 00 Brno tel.: +420 545 537 111, fax: +420 545 211 750 e-mail: [email protected] www.bmt.cz Supplier of medical, laboratory and pharmaceutical devices BMT provides for its own development, production, sale and service of medical, laboratory and pharmaceutical technology – individually constructed steam, hot air and low-temperature sterilizers, pressure sterilization vessels, washer disinfectors, laboratory drying ovens and incubators for drying, cultivation and heating of different materials in all kinds of laboratories, and stainless steel furniture for medical facilities. • More than 85 years of the production tradition • Member of the international MMM-Group • Satisfied customers in more than 100 world countries • Subsidiary companies – Slovakia, Poland, Ukraine, Novosibirsk, Russia, Germany, Spain, and the U.S.A. • Wide worldwide sales and service network • Quality management system certification according to EN ISO 9001:2008 and EN ISO 13485:2012 • Quality certificates declare the compliance with the technical and legal regulations for the sale of medical and laboratory technology in Europe, Asia, Africa, South America, European Union countries, the U.S.A., Canada, and China • Wide range of customer services – e.g. steam sterilizers validation by the company’s own accredited testing laboratory no. 1325 according to EN ISO/IEC 17025; turnkey deliveries of central sterilization departments • Thanks to the information received and customer needs specification all over the world, we optimize the properties of our devices with the aim to offer the maximum utility. For decades already, BMT Medical Technology s.r.o. has been delivering its products to important and top worksites all over the world. We have been delivering devices that are subject to the customer’s wishes only • • • • • • • Large and small steam, hot-air and low-temperature sterilizers Pressure sterilization vessels, steam generators Laboratory drying ovens and incubators Washer disinfectors Stainless steel medical furniture Turnkey central sterilization departments Validation of steam sterilizations according to EN ISO 17665-1 by an accredited testing laboratory • Advisory services in ISO standards introduction at central sterilization departments 20 CONTACTS BOCHEMIE a.s. BOCHEMIE a.s., Lidická 326, CZ 735 95 Bohumín tel.: +420 596 091 111, fax: +420 596 013 462 e-mail: [email protected] www.bochemie.cz Bochemie Inc. Profile Bochemie Inc. is one of the market-leading producers of disinfection, cleaning and fungicide products, inorganic chemical products and products for metal surfaces and accumulator masses. Our disinfection and cleaning products are time-proven leading products in the Czech and Slovakian markets and are rapidly expanding to other markets in Central and Eastern Europe. History In 1904 Österreichische Chemikalienwerk R. Goldschmied & Co. was founded in the town of Bohumin. The main aim of the company was to manufacture pharmaceutical and chemical products, among them a key product like the artificial sweetener SACHARIN. On by-product of the production of SACHARIN was the starting point for the manufacture of the first disinfectant CHLORAMIN T in the 20”s.. The production of CHLORAMIN B followed in the 30”s. The aim to supply a whole range of special chemical products created the foundation for the long-term prosperity of the company. In the post-war era the company focused on the development and production of unique inorganic chemical products, such as electrochemical materials, silicon semi-conductors and extraordinary clean gases for microelectronics. In 1994 the company was privatized, and since 2007 has been owned by the investment groups Benson Oak Capital and ARX Equity Partners. Products Bochemie Inc. is a provider of a wide range of disinfectant and sanitary products and services for hygiene in the medical and public health sectors, in institutional markets, in animal care, food production and food processing industries. Traditional halogen-release based are Chloramine T and B. Currently, Bochemie Inc. puts strict emphasis on the development of eco-friendly disinfectants, such as our SEPTODERM, DESAM, DESPREJ, CHIROSAN and DISCLEEN series. Quality Certifications Bochemie Inc. repeatedly retains ISO 9001 certification of a fair and responsible business in the chemical industry – responsible care. In 2012 ISO 13485:2003 certification was awarded which applies to the entire manufacturing process of pharmaceuticals. Classes lla and llb of the CE certification were granted for biocide products designed for cleaning of pharmaceutical products. Product portfolio: • Cleaning, disinfection and hand skin protection: Prosavon, Septoderm, Balmea • Products for reprocessing of surgery instruments and endoscopes: Discleen, Chirosan • Products for cleaning and disinfection of surfaces: Desam, Desprey • Water disinfection: Desam Solid, Savagro Basic, Chloramin B • Textile disinfection: Chirox, ProTextile Dez 21 CONTACTS BORCAD cz s.r.o. BORCAD cz s.r.o., Fryčovice č. 673, CZ 739 45 Fryčovice tel.:+420 559 640 632, fax:+420 558 640 629 e-mail: [email protected] www.borcad.cz, www.gracie.eu Company profile The company BORCAD cz was established in 1990 as a construction and development studio. It was founded by its present owner and Executive Head Ing Ivan Boruta. Today BORCAD cz is a leading European producer of railway and medical technologies. The company employs 150 people, exports to 69 countries worldwide and thanks to its unique design and original construction solutions, it is one of the most innovative companies in this field. In 2011 its turnover reached CZK 430 million. Company references In the area of medical technologies - Wissner-Bosserhoff, Maquet, Atom Medical. In the area of railway technology Siemens, Stadler, Deutsche Bahn, ČD, Leo Express, Aeroexpress, Alstom. Our Portfolio BORCAD focuses on the development, construction and production of birthing beds and chairs (AVE and VITA), gynaecological (GRACIE), transport (SELLA) and multifunctional chairs (PURA). 22 CONTACTS CLINITEX CZ s.r.o. CLINITEX CZ s.r.o., 1. máje 3236/103, CZ 703 00 Ostrava tel.: +421 597 578 688, fax: +421 597 579 005 e-mail: [email protected] www.clinitex.cz CLINITEX CZ s.r.o. (Ltd. company) was established in 2005 and then it was focussed purely on medical textile manufacture. The company was certified with ISO 9001:2009 and ISO 14385:2012 and nowadays, it is a major supplier of CLINITEX brand products both to medical facilities of various types and especially to laundries oriented to provide services for them, i.e. renting linens and textiles in health care industry. In the sector of medical aids’ production the company is manufacturing and developing surgical gowns, clothing and drapes for clean areas under the CLINITEX brand; the parameters comply with EN 13795:2011+A1:2013 European standard. New products include production and supply of incontinence products in standard version as well as in special custom-made version. If you choose CLINITEX medical wear, you will always get verified quality, appropriate materials and components as well as perfect design an ergonomic cut. We are anxious to listen carefully to our customers and combine their feedback with our extensive experience as well as hard work of the whole CLINITEX team. We feel this is the only way for our workshops to make professional and high quality wear. Our manufacturing programme consists of these main product ranges: • Outfits for doctors • Outfits for nurses • Outfits for patients • Outfits for surgery personnel • Surgery protection and drapes • Bed linens and flat textile products • Incontinence products 23 CONTACTS Codaco Electronic s.r.o. Codaco Electronic s.r.o., Hemy 825, CZ 757 01 Valašské Meziřčí tel.: +420 571 612 405, fax: +420 571 615 566 e-mail: [email protected] www.codaco.cz The firm Codaco Electronic s.r.o. was founded in 1993, and its main subject of activity is the development, production, delivery and servicing of communication systems for healthcare (so-called “nurse-patient systems”) and control systems for industry. Production is implemented on our own modern antistatic premises, meeting the strict criteria of the standard ČSN EN 61340-5-1. Our company is certified, and all production processes are subject to the quality control system ISO 9001:2008. As standard the electronic components are made without lead in the solder alloys and in compliance with the valid RoHS directive of the European Union. We currently offer an integrated range of communication and signalling devices intended for hospitals, sanatoria, social care institutes and retirement homes. The systems reliably ensure communication between clients and personnel. We offer queue management systems for medical waiting rooms, simple nurse-patient signalling (without voice) system and a comfortable IP communication (call) system for the inpatient wards of medical facilities. A high level of comfort for patients and personnel, easy operation and long-term operational reliability are our priorities. Thanks mainly to their quality and high user value our products are used in hundreds of medical facilities, not only in the Czech and Slovak republics, but also in Finland, Saudi Arabia, Dubai, Poland, Russia, Kazakhstan, Azerbaijan, Cyprus, Serbia, Montenegro, Bulgaria, Libya, Vietnam, Oman and Jordan. 24 CONTACTS CompuGroup Medical Česká republika s.r.o. CompuGroup Medical Česká republika s.r.o. Jeremiášova 1422/7b, 155 00 Praha 5 tel.: +420 246 007 922 e-mail: [email protected] CONTACTS www.cgm.cz We connect the health service world! CompuGroup Medical is one of the leading eHealth companies in the world. Its software products and communication solutions are designed to support all medical and organizational activities in doctors’ offices, pharmacies, laboratories and hospitals. CompuGroup Medical’s services are based on a unique customer base of over 400.000 doctors, dentists, hospitals, pharmacies and networks as well as other service providers. Our locations are in 19 countries with customers in 43 countries worldwide. CompuGroup Medical Czech Republic CompuGroup Medical Czech Republic was established in 2009 by the merger of software companies, owned by the parent company CompuGroup Medical. The vision of the company is fully computerized healthcare. The company is a leader in the domestic market of hospital and ambulatory information systems. Doctors are highly satisfied with their products and services, as is confirmed by periodic surveys. The company is perceived as subject that is flexible, innovative, and interested in the problems and needs of physicians, which in the end makes their life easier. 110 employees work in branches in Prague, Brno, Pardubice and Ústí nad Orlicí. CompuGroup Medical Czech Republic is a member of ICT Union since May 2012. Vision Our vision is fully electronized health service. Paperless, with data stored safely and in a structured electronic form, and at the same time accessible to authorized persons at the right moment – anytime and anywhere – to guarantee the best possible health care. Assignment Our assignment is to provide our clients with the best products and services to make their work easier and more effective and thanks to that bring them the highest possible value. 25 Daniševský, spol. s r.o. Daniševský, spol. s r.o., Hegerova 987, CZ 572 01 Polička tel./fax: +420 461 724 219 e-mail: [email protected] CONTACTS www.danisevsky.cz The Danisevsky Ltd., company, established in 1992, is a Czech medical devices manufacturer and supplier of a wide range of its products and services. We design and produce ceiling stands, swing arms, ceiling installation bridges and bedplatforms for anaestheticresuscitation departments, intensive care units, operating theatres and bed compartments of health-care units. We project, supply and install complete distribution piping of oxygen, compressed air and vacuums and other gases for health service, pharmacies, food and other industries. We supply ready-to-use compressor and vacuum plants, step-down pressure plants and other sources of medical and technical gases, including gas-treating units and separation of condensate. Ceiling stands and swing arms We provide complete deliveries of technology in the field of distribution, cleaning and filtration of medical and technical gases and vacuum, either for common use or for atypical highly effective biofiltration and other types of filtration. Ceiling instalation bridges Compressor station Bed head units Vacuum station 26 DELONG INSTRUMENTS a.s. DELONG INSTRUMENTS a.s., Palackého třída 153b, CZ 612 00 Brno tel.: +420 549 123 511, fax: +420 541 217 976 e-mail: [email protected] www.dicomps.com The establishment of the company dates back to May 1990. From the beginning, the company was concentrated on the areas of electron microscopy and vacuum technology. The company is entirely Czech subject. • LVEM 5 • Desktop Low Voltage • Electron Microscope 27 CONTACTS DESSTER s.r.o. DESSTER s.r.o., Balbínova 9, CZ 400 01 Ústí nad Labem tel.: +420 472 742 023, fax: +420 472 742 023, GSM: +420 602 147 269 e-mail: [email protected] www.desster.cz Desster s. r. o. is a sales and service company operating on Czech market since 1993. It was founded by former employees of Chirana OTS, therefore it actually followed the tradition of a company which had been selling and servicing medical equipment since 1955. Its activities are aimed above all at the area of sterilisation and rehabilitation in health-care. It sells and provides customer service for medical appliances used to sterilise all materials and tools, which are needed in this field, further on, it sells and services equipment for hydrotherapy. Desster s. r. o. is a sales and authorised service partner of the biggest manufacturer of medical equipment in the Czech Republic, BMT Medical Technology s. r. o. Brno, authorised business and service partner of Kovos Czech s. r. o., manufacturer of rehabilitation bathtubs. It is also an authorised service partner of Chirana Progress s. r. o., manufacturer of hydrotherapeutic equipment. Even though we are a smaller company, we can do what bigger companies can. We have contract partners and with them we can realise workplace reconstructions, including construction adjustments. Last reconstruction of such proportions was the reconstruction of central sterilisation unit in Litoměřice Municipal Hospital. We have also provided sterilisation technology for hospitals in Slaný, Most, Žatec, and for many private practices. The aim of our activity is to completely satisfy our customer by ensuring high-quality and complex service. Activities of this company: • Design and solutions of workplace equipment • Equipment sale • Mounting, warranty and after-warranty service • Staff training • Equipment revision • Consumer material delivery • Safety and technical checks • Technical condition assessment Our products: • All sterilisation appliances made by BMT Medical Technology s. r. o. • Low-volume steam sterilisers designed according to customer’s requirements • Hydrotherapeutic appliances made by Kovos Czech s. r. o. and Chirana Progress, s. r. o. • Hawo sterilisation packaging welders • Packaging materials for sterilisation by all media made by Stericlin • Indicators and tests for sterility checks with all media • Other consumer materials and equipment according to costumer’s requirements 28 CONTACTS DIPLOMAT DENTAL s.r.o. DIPLOMAT DENTAL s.r.o., Vrbovská cesta 17, SK 921 01 Piešťany tel.: +421 (033) 79 54 111, fax: +421 (033) 79 54 445, 77 26 326 e-mail: [email protected] CONTACTS www.diplomat-dental.com Allow us to introduce to you our company DIPLOMAT DENTAL s.r.o. situated in the word-famous spa town of Piešany, known for its thermal water and long-term tradition of medical engineering production. The firm continues to draw upon the experience of workers from the former company of Chirana Piešany a.s. founded in 1962. Since its foundation in July 1997, DIPLOMAT DENTAL s.r.o. has focused on the development, production, sale and service of dental equipment. The field of the production of dental units, dental chairs and stools of the DIPLOMAT series has become the leading programme of the company. DIPLOMAT DENTAL s.r.o. is a classic representative of an engineering company with its own development department which tries to develop and enhance dental products intended for all kinds of demanding operations and expectations of dental practice in accordance with the customer’s requirements. Products of Diplomat series cover the CONSUL, LUX and ADEPT dental units, DE20 and DM20 dental chairs, D10L dental stool and Xenos dental operating light. The units are fitted with high-quality instruments of the Swiss-based company BIEN AIR with the possibility to choose individual instruments. Delivered with the units are a programmable chairs, which together with the dentist stool and assistant stool form the harmonic set. The saleability of our products is enhanced by a wide commercial and service network both in Slovakia and abroad. Training sessions are regularly organized from the knowledge of merchandise for business partners and training sessions for service engineers. The main objective of DIPLOMAT DENTAL s.r.o. is to obtain perfect satisfaction of customers, which results, among others, also in the fact that since its foundation the company reaches growth in the sales volume of more than 20% each year. In the year 2008 the sales reached the level of more than 2400 pieces of dental units, 2400 pieces of dental chairs and 3000 pieces of stools. Export, particularly to Russia, Ukraine, Poland, Czech Republic, Hungary, Kazakhstan, Lithuania, Latvia, Croatia, Portugal, Germany, France and other EU Member States, South-East Asia and Arabic world makes 95% of the total volume of sales. Diplomat Adept DA 170 Diplomat Adept DA 370 Diplomat Consul DC 350 Diplomat Lux DL 210 29 DN FORMED Brno s.r.o. DN FORMED Brno s.r.o., Hudcova 76a, CZ 612 48 Brno tel.: +420 532 198 888, fax: +420 532 198 889 e-mail: [email protected] www.dnformed.cz The company was founded in 1992 as original Czech Business Company specialized for sale of the medical devices for hospitals, laboratories and spa. The company was certified by TÜV SUD according to the EN ISO 9001:2009 system. The company disposes with an engineering office specialized in medical and laboratories technology for securing delivery of complex technological solution for medical fields. • • • • • • • • Operation room Devices for surgery, gynecology, urology and proctology Intensive care Mothers care Rehabilitations and balneology equipment Laboratory equipment Service, metrology and validation Design studies and project Export division • Design studies, business plan and project for rehabilitation and spa • Hydrotherapy, physiotherapy • Cryotherapy and cryochambers • Design studies and project for laboratory equipment • Boxes for cytostatic and pharmacy • Medical Technology for modular hospital 30 CONTACTS DOMKAT, s.r.o. DOMKAT, s.r.o., U Rybníka 1922/17, CZ 586 01 Jihlava tel./fax: +420 567 210 057, GSM: +420 736 626 023 e-mail: [email protected] www.domkat.cz DOMKAT, s.r.o. is engaged in developing and manufacturing hydraulic pumps / actuators designated mainly for manufacturing medical beds, chairs and bathroom jacks. All products are designed with the needs of medical furniture producers. Since its foundation 2003 all activities have been based on close cooperation with well-known customers from Europe. DOMKAT, s.r.o. is going to do the best to be the reliable partner of you. • Professional hydraulics for medical furniture 31 CONTACTS EGO Zlín, spol. s r.o. (Ltd.) EGO Zlín, spol. s r.o. (Ltd), U Pekárny 438, Štípa, CZ 763 14 Zlín tel.: +420 577 100 031, fax: +420 577 914 363 e-mail: [email protected] CONTACTS www.egozlin.cz EGO Zlín, spol. s r.o. (Ltd), the Czech private company, established in 1992, has been becoming very early a highly regarded producer and distributor of systems used when dealing with critical situations (traffic accidents, environmental disasters, industrial disasters, occurrence of dangerous infections). The marketing activities of the company EGO Zlín are focused on deliveries to clients working for public sector such as hospitals and their infection wards or incoming emergencies, health rescue service, fire brigades, police, hygiene clinics, veterinary service, county and municipal crisis wards, public funds, military health and logistic units, CBRN defense units, etc. The company´s products have been finding its satisfied clients in more than 30 foreign countries, not only the neighbor ones such as Slovakia, Austria, Poland, but also in Lithuania, Latvia, Estonia, Croatia, Ukraine, Russia, Kazakhstan, Belarus, Taiwan, Brazil, and many others. The company participates at least twice a year in prestigious international health care or defense industry trade fairs (MEDICA Düsseldorf, ARAB HEALTH Dubai, IDET Brno, DSEi London, EUROSATORY Paris, etc.). Company EGO Zlín also annually holds a special international conference called „Medicine of Disasters“, which focuses on dealing with crisis situations. • • • • • Transport bags for contagious patients Mobile chambers for patient isolation Decontamination system Individual portable inflation tents Vacuum fixation splints and mattresses System of biological protection ...includes the products to be used in protection system when dangerous microorganisms appear in the environment (highly dangerous or virulent infections); • • • • Stretchers and groundsheets Optimized medical rucksacks or suitcases Antidecubite stretchers, mattresses and pads Items for hygiene of immobile patients Tent system ...includes the products to be used for short or long terms shelters in field conditions; Emergency system ...includes wide range of products used in urgent medicine such as high quality vacuum fixation splints and mattresses, specialist rescue equipment such as stretchers and groundsheets etc, optimized medical rucksacks or suitcases fully equipped under the relevant laws. Decontamination system ...includes products ensuring immediate decontamination, rinsing and cleansing of people, equipment and devices in field conditions; System of items for immobile patients ...includes products which help to care for immobile patients, such as antidecubite stretchers and mattress (various types according to the severity of bedsores), antidecubite pads, items for hygiene of immobile patients, etc. 32 EKOVUK MEDI, s.r.o. EKOVUK MEDI, s.r.o., Na Maninách 1590/29, CZ 170 00 Praha 7 tel.: +420 220 303 000, fax: +420 220 303 008 e-mail: [email protected] www.pneuven.cz The company manufacturing and supplying medical devices for pressure therapy was established in 1992. The devices, together with the respective sleeves, are intended for special lymphological medical centres, dermatic clinics, surgeries spas, rehabilitation departments, beauty salons and all specialized centres using pressure therapy. The company has a certificate for QMS in accordance with ISO 13485 and our products are CE marked. PRODUCT RANGE Devices PNEUVEN are produced in three categories: PNEUVEN MEDI PNEUVEN RELAX PNEUVEN KOSMETIK The devices are universally applicable for following indica ons: • Swellings caused by congenital and acquired disorders of the lympha c system • Swellings a er vein inflamma ons • Preven on of deep vein inflamma ons pre- and post- opera ons • Rehabilita on of post- thrombosis disorder • Chronic venous deficiencies • Therapy of calf-ulcers • Swellings caused by func onal wear-out of lower limbs • Rehabilita on of sportsmen and persons with strained limbs • Organism regenera on • Cosme c improvements of thighs 33 CONTACTS EKOM spol. s r.o. EKOM spol. s r.o., Priemyselná 5031/18, SK 921 01 Piešťany tel.: +421 337 967 211, fax: +421 337 967 223 e-mail: [email protected] www.ekom.sk EKOM spol. s r.o. is a Slovak company dealing with the development and production of medical equipment in particular and since 2000 also with thin sheet metal processing using CNC technology. The company´s main objective is to manufacture competitive products which meet the most-demanding market requirements and to improve product quality and the quality of manufacturing technologies systematically. The core of Ekom´s product range consists of oil-free dental compressors, suction units as well as their accessories. All of them are designed for use in dental surgeries, dental laboratories and for small and middle sized central air supply systems. Along with dental compressors company produces medical compressors for supplying lung ventilation equipment with medical grade air. Nowadays Ekom supplies the whole range of standard and customized medicine compressors solutions to the majority of ventilators and anesthetic devices manufacturers. Self-lubricating piston rings made of Teflon, medically sound components, internal surface of air chambers covered with a protective layer, automatic dryers and filtration units are the guarantee of a high quality air supplied by Ekom compressors. Thanks to a low noise level and oil-free technology do Ekom products respect also environment protection requirements. Even this advantage makes the products very attractive worldwide and therefore Ekom spol. s r.o. exports 99% of annual production abroad. Obviously the mentioned products meet the quality and safety standard in accordance with the international European directive MDD93/42 EEC (ISO9001:2000/ISO13485:2003), the American k510 (FDA) as well as the Canadian CMDCAS system. • Dental compressors for dental prac ces and dental laboratories • Suc on pumps • Components for air filtra on and drying systems 34 CONTACTS ELLA-CS, s.r.o. ELLA-CS, s.r.o., Milady Horákové 504, CZ 500 06 Hradec Králové 6 tel.: +420 495 279 111, fax: +420 495 265 655 e-mail: [email protected] www.ellacs.eu This company was established in 1991 and specializes in production of special medical equipment. ELLA-CS is a purely domestic company without any foreign ownership. At present it has 110 employees. The company came into existence as a logical continuation of production activity dating from 1986 under the auspices of the Medical Faculty of Charles University, Institute of Experimental Oncology in Hradec Králové. Export activities began with special thermocouple probes for radiothermotherapy that were developed in the above mentioned institute. The company extended its range of products to include production of implantable stents, extractors and other special devices. Our core business is the development of original products in close cooperation with eminent clinical centres. Currently, the company has a portfolio of 3 globally unique products – biodegradable BD Stent, Danis Stent to stop bleeding from esophageal varices and ELLA Extractor for easy and safe removal of implanted stents in the esophagus. Clean room technology, utilizing GMP (Good Manufacture Practice) in ISO Class 7 (EN ISO 14644) was installed for our two production facilities. GMP meets the highest criteria for production of implants and is validated for this kind of activity. The audit (TÜV) for obtaining the ISO 9001, EN 46001 and first CE Mark certificate was successfully conducted in 1996. Since 2004 the company is certificated and meets the requirements of EN ISO 13485 standard. The credo of the company has been since the very beginning to be a partner to physicians when solving their problems – either in experimental or clinical fields – and to react in a flexible way to their demands. The company has also focused on solving developmental tasks in cooperation with prestigious foreign and domestic institutions. The company intends to be a leader in development of new types of medical devices in the Czech Republic and to be a direct commercial provider. In addition, the company intends to gradually extend the range of newly developed products and further expand exports and future branch offices outside the Czech Republic. • • • • Gastrointestinal stainless steel and nitinol stents Esophageal biodegradable stent Extractor for esophageal nitinol stents Quality System in accordance with EN ISO 13485:2003 35 CONTACTS EMBITRON s.r.o. EMBITRON s.r.o., Borská 55, CZ 301 00 Plzeň tel.: +420 377 423 556 e-mail: [email protected] www.embitron.eu Embitron Ltd. is the producer and distributor of medical devices for physiotherapy, spa and wellness as contactless electrotherapy, biostimulation lasers, pressotherapy, passive motion devices etc. Embitron company is an important initiator and innovator of the vacuum compression therapy for the treatment of the arterial diseases, metabolism stagnations of the arterial, diabetic, neurocirculatory or post-traumatic origin (medical device EXTREMITER 2010 Better future edition). Another method which was researched, produced and implemented into medical care, is distance electrotherapy with VAS07 Better Future edition device inducing analgetic, healing and regeneration effects. Moreover, EMBITRON company is focusing either on individuall bussiness, research, development, projecting and consulting activities in complex rehabilitation, spa and wellness projects in Czech and Slovak Republic as well as foreign countries all over the world. Embitron Ltd. is fully certified in research, development, production by quality mark ISO 13 485 : 2003. All of the devices supplied are compatible and certified by European Union Directive 93/42/EEC and CE mark. Some of the devices are also certified for medical care in Russia and USA. • Vacuum Compression Therapy • Distance Electrotherapy • Pressotherapy and local bulb vacuum therapy • Electrotherapy • Biostimulation Lasers • Lymphodrainages • Passive motion devices • Acupuncture Devices • Komplex projects of Spa and Wellness REHABILITATION DIABETOLOGY ANGIOLOGY PHLEBOLOGY PHYSICAL THERAPY 36 CONTACTS eNZi.cz s.r.o. eNZi.cz s.r.o., Poláškova 32, CZ 757 01 Valašské Meziříčí tel.: +420 571 610 387, +420 777 773 567, +420 777 773 568 e-mail: [email protected] www.enzi.cz Design works Design works with focus on pharmaceutical industry and public health care from the formation of concept, consulting with the customer and user up to elaboration of project for building permit and project for realization of construction. Supply and installation Supply and key-ready installation (arranging for engineering activities – built-in clean premises including air-conditioning and ventilation, technology, equipment, installation of media. All that using components and materials specifically intended for the given type of job order. • Design and installation of clean premises for development, research and production of pharmaceutical products, drugs and other preparations • Design and installation of operating theatres of all the categories, complete operation tracts, hospital assemblies, intensive care units, anesthesiological-resuscitation wards, central sterilization departments, laboratories • Realization of production premises with high demands for absence of dust, temperature, humidity and overpressure • Validation – installation, operational qualification of clean premises, media and technologies including measurement and regulation systems; we ensure a complete package of services in the area of validations - DQ, IQ, OQ, PQ, VMP, consulting of GMP and QA regulations • Service – within supplies we ensure professional service of devices supplied by us We realize our businesses in many regions and countries, we specialize predominantly in Russian Federation, EU countries and Czech Republic. We dispose of design and realization team of experienced professionals, engineers and technologists that have long been engaged in the area of design and installation of clean premises. Design, realization and supply of clean premises and technological assemblies in the area of pharmacy and medicine. We offer our services predominantly in the area of pharmaceutical industry and public health care. Briefly there where it is necessary to meet the conditions of GMP and GLP regulations and with regard to special technologies installed in clean facilities. 37 CONTACTS ERGON a.s. ERGON a.s., Papírenská 1, CZ 166 11 Praha 6 tel.: +420 234 123 111 e-mail: [email protected] www.ergon.cz Ergon a.s. is a leading Czech manufacturer of health clothing and the largest Czech manufacturer of individual orthopaedic footwear and insoles. The firm’s history dates back to the early 20th century, it was transformed into a stable stock company without foreign participation in 1997. The firm has invested a substantial amount of financial volume into the reconstruction of its premises in Prague 6 over the past years that, together with the quarters used directly by our company, represent a contemporary commercial and administrative centre. Regarding the manufacture of health clothing, our firm looks back on many years of tradition, seeing it advance to the position of a well-established supplier in both the Czech and foreign markets, and its products are sought after based on their quality and the firm’s pricing policy. Ergon a.s. manufactures: hernia, abdominal, and lumbar belts, orthoses, bandages and physiotherapy, anti-decubitus and positioning pads, fixation devices. Manufacture of individual orthopaedic footwear and insoles Ergon a.s. is currently the largest domestic manufacturer of individual orthopaedic footwear and insoles, with a broad range of activities that span the whole Czech Republic territory. The unique production technology of individual orthopaedic insoles was established several years ago and relies on the digiMED system – a digital baropodometry (pedography) system that enables the exact measurement of pressure loadings to the soles of the feet, and the exact design of insoles including computerised correction according to a physician’s prescription, and 100% exact milling with a computer-controlled small cutter. Our more than three-quarter century long production tradition foreshadows the rich experience and craftsmanship that guarantee the quality of our products. At the same time, Ergon a.s. is a firm that employs cutting-edge technologies, designing methods and materials. Activity of the firm focuses on the following spheres: • Manufacture of health clothing • Manufacture of individual orthopaedic footwear and insoles • Sale and lease of digiMED systems • Operation of medical device retail stores 38 CONTACTS ERILENS s.r.o. ERILENS s.r.o., Papírenská 114/5, CZ 160 00 Praha 6 tel.: +420 234 123 456, fax: +420 234 123 360 e-mail: [email protected] www.erilens.cz The company’s mission is to create optimal conditions for health and home care providers and for their work to help patients in their daily life, using recent technology and modern methods. ERILENS was established in 1992 as a family company. The family members are active in company’s management. Since 2010 was ophthalmological division moved to the Videris Ltd. (Prague, Czech Republic), company of ERILENS Group. There are 21 employees in ERILENS. The turnover of the company is growing. Currently there are two main activities in different divisions in ERILENS: The ROOMER division is projecting and completing unique system for transportation of disabled immobile persons. The system helps to move patient very easy from anywhere you need: from bed, chair, water closet, and bath or from house to car. It isn’t necessary to modify the facility’s walls, doors etc. to install the system. The rails of portable overhead lift are discrete and good looking. ERILENS prepares all technical documentation, incl. checking of system’s statics in specific facility. The REHA division The mission of the REHA division is to provide handicapped persons and those who care about them with services and products created to make the care easier and the life more comfortable. The division was established in 1997 by acquisition of existed facility. The technology and the products were innovated. Currently ERILENS Ltd. is the market leader on the market of walking - locomotion aids in the Czech Republic. A significant volume of the product is exported especially to a number of European countries. ERILENS finalized new design and development of 2 new types of crutches in autumn 2009. The first of them is new designed forearm crutch FD93NEW. There is the enhanced strength (150 kg) and new anti-clacking system on it. The second one is wholly new type VERA with softened gripe.Last but not least products of the REHA division are for example finger splints, plaster fixation material Optima Cast and oscillated saw for removing the plaster and similar casts at hospital’s surgery departments. Activities of ERILENS s.r.o. in Slovak Republic: In 2001 was founded firm named ERILENS Slovensko s.r.o., which is extending activities of both divisions within territory of Slovak Republic. 39 CONTACTS FAVEA Europe, s.r.o. FAVEA Europe, s.r.o., Business Center Gemini, Building B, Na Pankráci 129/1724, CZ 14000 Prague tel.: +420 777 121 000, fax: +420 225 992 201 e-mail: [email protected] www.favea.org FAVEA is a leading engineering company in realization of new pharmaceutical projects and in renovation of existing facilities. Since 1992, FAVEA has developed and realized pharmaceutical projects such as building of cleanrooms and surgery blocks, air conditioning and ventilation systems. FAVEA also supplies equipment, launches production lines, performs validation and certification of the new objects in compliance with GMP. Our client base includes such famous companies as «Nizhpharm», «Pharmstandard», «Tathimpharmpreparaty», «Soteks», BHFZ, Darnitsa etc. In the year 2010, in Moscow, FAVEA won a prestigious “Platinum Ounce”, a special award for “The successful implementation of the pharmaceutical projects in accordance with the GMP standards in the Russian Federation”. This significant award was granted for the realization of many successful projects during more than ten-years practice in accordance with modern standards of Good Manufacturing Practice (GMP). • Development of pharmaceutical production and medical facilities, cleanrooms and operational blocks projects in compliance with GMP standards; • Projection works in compliance with international standards, Russian norm GOST R 52249-2004 introduced in 01.01.2005, and Ukrainian norm - DBN A.2.2-97; • Pharmaceutical and medical engineering; • Organization of construction works; • Complex supply of clean rooms in compliance with requirements of GMP standards and ISO 14644 (space planning, doors, floors, ceilings, lighting, filters, ventilation grates, etc.); • “Turnkey” installation of clean rooms, including ventilation and air condition systems etc.; • Delivery of special stainless furniture for clean rooms; • Delivery of the pharmaceutical technological equipment; • Delivery of equipment for gaining, distribution and storage of water PW and water for injection WFI; • CIP / SIP stations; • Installation and launch of the technological and auxiliary equipment; • Startup of pharmaceutical production; • A full validation of the pharmaceutical production in compliance with the GMP: the specification of the project, specification of clean rooms and ventilation systems, specification of technological equipment and engineering systems, validation of processes including the validation of projection documentation; • Training of qualified personnel for our Customer; • Delivery of GMP education and consultancy; • Building/reconstruction financing services. 40 CONTACTS FOMA BOHEMIA spol. s r.o. FOMA BOHEMIA spol. s r.o., Ul. J. Krušinky 1604, CZ 501 04 Hradec Králové tel.: +420 495 733 288, fax: +420 495 733 376 e-mail: [email protected] www.foma.cz The company profile FOMA BOHEMIA spol.s r.o. is a manufacturer of photographic materials with more than 90 years of tradition. In the 1997 year the quality assurance system according to the ČSN EN ISO 9001 and ČSN EN ISO 13485 Standards has been implemented. In 2001 the entitlement to use the European Conformity mark CE according to the Directive of the EU No. 93/42/EHS for the X-ray films of MEDIX and DENTIX brand names has been obtained. The production lines and actual offer • The films and processing chemicals for the radiology, for the dentistry and for the veterinary • The X-ray devices for medical use and the accessories for them – versatile usable high-frequency X-ray system FOMAtec HF for general radiography. Option: direct digital radiography with a flat-panel detector technology, using a control monitor for displaying captured image and data storing in DICOM 3.0 system • Accessories for X-ray working places • Indirect radiography - CR • The darkroom equipment – cassettes, intensifying screens, the protection aids, the safe-light sources, the viewers (negatoscopes), the sensitometers and densitometers, the film processors • • • • X-ray films Processing chemical for X-ray films Medical X-ray systems Accessories for X-ray working places 41 CONTACTS GEA Heat Exchangers a.s. GEA Heat Exchangers a.s., Slovanská 781, CZ 463 12 Liberec 25 tel.: +420 485 225 111, fax: +420 485 225 112 e-mail: [email protected] CONTACTS www.gealvz.cz Top GEA competence for optimum quality Healthcare Energy-efficient packages for strictest hygienic requirements in hospitals GEA: leading worldwide in heat exchange As an internationally active technology group, GEA Group concentrates on process technology and components for demanding production processes in a wide variety of end user markets. GEA Heat Exchangers, the largest segment within GEA Group, consolidates all the activities in the area of heat exchange and offers the probably largest portfolio worldwide in this field. Heat exchange with HX-Factor: that means customized, reliable, and sustainable solutions conforming to the signs of the times. GEA Clean Rooms are impressive proof of this quality and innovative strength. GEA Clean Rooms Clean rooms and ultra-clean rooms represent some of the most complex challenges for air treatment. They demand absolutely top standards of competence, sophisticated air treatment, as well as specific experience for clean rooms that you can trust. GEA Clean Rooms satisfy all international clean room standards and ISO classifications. They far exceed conventional quality levels. Covering the entire process for turnkey solutions GEA customers profit from our comprehensive overall expertise in room air handling and filter technology. In contrast to other providers, we cover the entire process of air treatment and air filtration for supply air and extract air systems. We understand the interrelationships and manage them down to the smallest detail. As a result, we can offer highly effective, process-dedicated package solutions with energy-efficient technology – optimized for your sector and applications. Efficient GEA Heat Recovery Systems and reliable GEA Air Filtration Systems with low pressure drop assure considerable energy savings. We deliver turnkey solutions on a one-stop shopping basis: beginning with building elements such as ceiling grid modules, filter and panel ceilings, laminar flow ceilings, room walls, wall panelling, windows, and doors – including development and installation of your clean room facilities and extending to after sales service. One-stop solutions: • • • • • Room air handling Air filtration Cleanroom design software Laminar flow modules Ceiling, including lighting • • • • • Partition-wall panels INWALL Click® covering panels Windows and doors Monitoring and documentation systems After sales service GEA Clean Room system solutions Maximum benefits with manageable investment GEA manufactures and delivers a comprehensive system of built-in clean rooms, which enables a decrease in the number of undesirable airborne particles to a level suitable for healthcare complying with the requirements of standard EN ISO 14644. The GEA portfolio includes wall panels, wall lining, doors, pass-through boxes, ceilings, laminar fields, ceiling air outlets, light fixtures, as well as air handling and HVAC components. GEA Clean Rooms allow easy integration of display and diagnostics systems into the internal wall cladding of operating rooms. The whole product range conforms to strict requirements for working areas prescribed by health care systems: e.g., specifications relating to as clean ability, air exchange, even air flow, and lighting. Applications: • Operating rooms • Intensive care units • Pharmacies • Radiography, CT, MR • Laboratories 42 CHEIRÓN a.s. CHEIRÓN a.s., Ulrychova 2260/13, CZ 162 00 Praha 6 tel.: +420 377 590 433, fax: +420 377 590 435 e-mail: [email protected] CONTACTS www.cheiron.eu SUCTION UNITS History Founded in 1994, CHEIRÓN a.s. is today a leading company in development, production, import, distribution, export and service of medical equipment and it is well known in more than 45 countries. Products The company´s product portfolio consists of product lines of international award winning electrical suction units VICTORIA, portable suction units DYNAMIC, QUICK VAC TRANSPORT, complete range of jet suction sets and accessories, aerosol and oxygen therapy devices. DYNAMIC Quality Our company policy focuses especially on high quality and 100% safety of delivered products and services. The complete production process is controlled as per standard harmonised system and it is fully in accordance with DIR 93/42/EEC and other requirements valid in EU and GOST standard. CHEIRÓN a.s. is certified by compliance to EN ISO 9001 and EN ISO 13485. A team of top specialists with long-term professional experience is working hard to meet all the needs of our customers. CHEIRÓN a.s. runs a systematic professional training programme for each of the teams members, including external training sessions at our international suppliers. Thanks to the growing experience and skills each of our employees significantly contributes to the improvement and further development of CHEIRON´s products. QUICK VAC TRANSPORT Distributor leadership To ensure maximum availability of products and services CHEIRÓN a.s. has established a number of local offices all across the Czech Republic and it is creating a powerful network of international distributors worldwide. In order to keep tight contact with our customers we meet our clients and business partners regularly at several international congresses and trade fairs, e.g. Medica – Dűsseldorf, Zdravoochranienie – Moscow and Arab Health – Dubai. The complete range of all our products is presented on our web site enabling direct order placing. VICTORIA 43 CHEMCOMEX Praha, a.s. CHEMCOMEX Praha, a.s., Elišky Přemyslovny 379, CZ156 00 Praha - Zbraslav tel.: +420 226 259 111 e-mail: [email protected] CONTACTS www.chemcomex.cz SED SED is a system for automated calculation, evaluation and archiving of organ and effective doses obtained by a patient during diagnostic and intervention examinations employing ionising radiation exposure for medical purposes. Data Data of individual examinations are sent to the system by means of DICOM files, usually originating from the hospital’s PACS system. The SED system also allows capture of the examination data directly from the individual devices. Optional connection to the hospital’s information management system such as RIS is also available. Calculation SED provides automated dose calculation for the following essential modalities: • radiography • computed tomography • angiography • mammography DRL SED also performs automated calculation of the values of local radiological levels from the collected and evaluated data. This allows to directly compare performance of the individual devices against the national radiological standards or to monitor temporal changes of these values. Web Interface • on-line dose indication – SED system provides web interface that allows to easily read patient’s obtained effective and organ doses within minutes after the examination in question took place. • statistics – the web interface works with a whole range of statistical data regarding the number of examinations, dose averages for each examination, comparison of individual devices or comparison of doses related to the operating personnel. This analysis can contribute to detection of discrepancies and thus to reduction of the radiation exposure of the patients. Statistical analysis is presented by means of well-arranged tables and interactive graphs. • data export, protocols – web interface also provides exporting functionality of the data for post-processing using external resources. That includes export to ubiquitous PDF format. There is also an option to generate protocols regarding the obtained dose for each patient. SED is therefore an essential tool for any hospital or medical establishment concerned with QA of medical examinations involving ionising radiation. 44 CHIRANA Medical, a.s. CHIRANA Medical, a.s., Nam. Dr. A. Schweitzera 194, SK 916 01 Stara Tura tel.: +421 918 714 000, fax: +421 327 752 218 e-mail: [email protected] www.chirana.eu The history of a company started in 1935, in the early 1960’s the production of dental equipment began. The production of medical devices still continues in companies CHIRANA Medical and CHIRANA, STARA TURA. The Group’s strategy is to continually offer high quality products in very short delivery periods. To be able to ensure the necessary high quality, the company uses modern technologies, such as NC and CNC machines. In the last couple of years, significant investments have been made in the entire holding, which were aimed at changing the manufacturing process and the complete overhaul of both plants (dental and healthcare devices production). The investments have had very positive effect with regards to lowering costs, increasing the flexibility of production and also the visual, safety and environmental aspects of production. Wide range of product portfolio has traditional features. If compared with major worldwide competitors the Group’s product portfolio is comparable regarding to utility parameters and quality and in the area of range and special features outperform most competitors in the business. Product portfolio of CHIRANA: • dental units CHEESE, Smile • dental chairs • dental instruments • anaesthesia units VENAR • breathing units – CHIRANA Aura • patients monitoring systems for intensive care The modular concept is the characteristic feature of the products. It allows costumers to choose from many various products. The company doesn’t produce the products to stock for further sale but prefer the production in accordance with concrete order of customer following its specific request and features. Standard delivery time is in range from 14 to 45 days. Put our trust on tradition ... since 1935 45 CONTACTS CHIRASTAR KDT, s.r.o. CHIRASTAR KDT, s.r.o., Vlnitá 52/425, CZ 147 00 Praha 4 tel./fax: +420 244 464 234 e-mail: [email protected] www.chirastar.com The Czech company CHIRASTAR KDT, s.r.o. has been developing and manufacturing dental equipment since 1994. The main product in program composes of the production of dental sets under the registered trade mark BOHEMIA. Quality Management System is certified according to EN ISO 13485:2003 (Directive 93/42/EEC), Certificate CQS – IQNet. Export is a very substantial part of our business activities. We are authorized to sell our products not only on the market in Czech Republic and EU and also in Russia and Belorussia. On the year 1997 we are finished the development own stomatologic set. For the control the tools we are used own simple and reliable system, developed at the reconstruction olderst sets – also several years examinated. The set we are drafted how chair-carried with upper guiding of the tool-hoses. In the course of the development we are bringed to the market another types – five-tools sets, stationary sets, sets with lower guiding of the tool-hoses and the latest-set with external tooltable with a large tool-server. If we may keep relativ low price, we are invested in metal-working machine and in this time our firm producted 80% components in our product-areas in Prague and Brno. Export is for Chirastar priority business. 46 CONTACTS CHIRMAX s.r.o. CHIRMAX s.r.o., Komořanská 955, CZ 143 10 Praha 4-Modřany tel.:+420 241 768 407-8, fax:+420 244 400 910 e-mail: [email protected] www.chirmax.cz The tradition of manufacturing surgical suture material at Chirmax goes back over more than 80 years. Classical material have been supplemented by a large number of synthetic fibers and result in the current modern product range of absorbable and non-absorbable sutures which in the meantime amout to more than 1200 individual products. Production takes place in accordance with GMP guidelines and a comprehensive quality management system has been implemented. PRODUCT RANGE ABSORBABLE MONOLAC monofil POLYDOX monofil Description Polyglycolic acid and e-caprolacton copolymer, violet, natural Polyglycolic acid, violet, natural Polyglycolic acid, violet, natural quick absorbable P-Polydioxanone, violet NON-ABSORBABLE CHIRAFLON monofil CHIRALEN monofil SILON monofil TERVALON braided SILON / ORSILON braided SILK braided Description PVDF (similar to Teflon), blue Polypropylene, blue Polyamide-6 or 6/6, blue Polyester, green Polyamide, white Coated with silicone, black Chiralen meshes Capromeshes non-absorbable partially absorbable CHIRLAC braided CHIRLAC rapid braided 47 CONTACTS CHIRONAX-DIZ spol. s r.o. CHIRONAX-DIZ spol. s r.o., V Korytech 23, CZ 106 00 Praha 10 tel.: +420 272 769 891, fax: +420 272 766 807 e-mail: [email protected] www.chironax-diz.cz Chironax-Diz Co. Ltd. is the successor company – firm after n. u. CHIRANA OTS, which was established in 1953 as the greatest deliverer, firm of sanitary technology in Czechoslowakia and had set up in business practically all sanitary organizations at contemporary export to the states of Eastblock and so called Third countries. The contemporary undertaking CHIRONAX-DIZ is engaged in this branch already 10 years and in the latest time has shared on the building of great sanitary integrities, first af all in the Czech Republic. The undertaking disposes in the branch of sanitary technology with qualified specialists and cooperates at the building with trustworthy partner firms. It ensures the new building and reconstruction of sanitary arrangements in the whole extent, i. e. from the project over the deliveries, training of attendance, assembly, coordinate activity to the advising. The yearly average turnover at 30 employed persons is 150 mil. Kc. PRODUCT RANGE: In the last three years have been ensured - except others - the decisive actions; • Central military hospital – pavilion CH 1, pavilion B III • State hospital Trutnov – pavilion biochemestry • Pavilion gyn-obstetrics • FH Motol – stage VII and VIII • Hospital with policlinic Trebíc – more useful pavilion • Policlinic MO and GŠ Prague • Military treatment institution Karlovy Vary • District institution of social services Prague 7 and additional. 48 CONTACTS Ing. Jan Turek Ing. Jan Turek, Krátká 192, CZ 391 37 Chotoviny, Branch: Táborská 195, CZ 391 37 Chotoviny tel.: +420 605 151 379 (Ing. J. Turek - executive), +420 380 427 217 (office) e-mail: [email protected], [email protected] www.janturek.cz About us We are a South Bohemian company, based near the town of Tabor. Our beginnings date back to 1993. We manufacture equipment for health care, mainly for physiotherapy, however we are active in other disciplines as well (e.g. gynecology). Greater development of the company occurred in 2008. We have moved into new production facility, began to develop new products and managed to multiply the volume of our production. We are capable to manufacture equipment for our customers according to their wishes and requirements. We always strive to provide the best quality at the best price to our customers. Services Besides the development and manufacture of our own products, we also do custom manufacturing. We are capable to design and manufacture equipment according to your requirements. Our services: • • • • custom metal works (cutting, machining, welding, etc.) surface treatment (we provide painting, electroplating etc.) service and repair of machinery and equipment designing and engineering (workshop drawings for both existing and new equipment) We always strive to provide the best quality at the best price to our customers. Products: • • • • • • Universal multi-purpose chair Universal veterinary table - 1300 VET Universal gynecological examination chair - GYNO 1 Universal gynecological examination chair - GYNO 2 Dog grooming table Universal gynecological examination chair - GYNO 4 49 CONTACTS ING corporation, spol. s r.o. ING corporation, spol. s r.o., Dr. Jánského 3238, CZ 738 01 Frýdek-Místek tel.: +420 558 663 215, fax: +420 588 663 217 e-mail: [email protected] www.ingcorporation.cz ING corporation, spol. s r.o. is involved in a research, development, service, application and sale of medical devices in the field of prosthetics and orthotics. ING corporation, spol. s r.o. was founded as a family owned company in 1991. Our company is a continually developing dynamic team with open and new ideas. We believe in carefully listening to our customer’s wishes and finding solutions. We work at bringing about our customer’s respect and satisfaction through a friendly atmosphere. Our goal is to provide high quality products and services. We are focused on modern approaches to design, production, application and distribution: • Quality (ISO 9001:2000 Certificate) • Teamwork with universities and hospitals • Application of CAD/CAM methods by the design and development of medical devices Our products have been awarded prizes at the Rehaprotex and HospiMedica trade fairs in Brno. We have also been recipient of the Good Design Award from Design Centrum, Czech Republic. Range of products and activities: • Lower limb prosthetic modular components • Spinal and modular limb orthotic systems • Silicone prostheses of missing body parts • Foot orthoses • Diagnostic and measurement devices • Organisation of professional trainings and seminars 50 CONTACTS INPARTNERS GROUP INPARTNERS GROUP, Lidická 51, CZ 602 00 Brno tel.: +420 541 247 251, +420 541 233 816, fax: +420 541 247 251 e-mail: [email protected], [email protected] www.inpartners.cz INPARTNERS GROUP is a network of mutually collaborating independent Czech and Slovak patent attorneys and advocates with long-time practice. INPARTNERS GROUP renders complete legal and professional services, especially for business subjects, in the field of intellectual property, commercial, civil, labour, family and criminal law. The services are provided in foreign languages as well. The firm is fully qualified to file particularly patents, utility models, industrial designs, trademarks, geographic denominations, appellations of origin, lay-out designs of electronic circuits, and also any pleading considering unfair competition and copyright. It can carry out patent and trademark searches in national or international databases as well as searches of available literature. It can also provide the qualified representation before the Industrial Property Office of the Czech Republic (UPV), World Intellectual Property Organization (WIPO), European Patent Office (EPO), Office for Harmonization in the Internal Market (OHIM) and other relevant authorities. The firm is also able to provide the qualified representation before courts, particularly in the field of both the civil and administrative proceedings. The members take part in the professional meetings and work in various associations involved in the protection of industrial property both in the Czech Republic and abroad. INPARTNERS GROUP also provides trainings in the field of business protection and development of intellectual property. Patent and Law agency 51 CONTACTS JIVA - Jirák, spol. s r.o. JIVA - Jirák, spol. s r.o., Vestec u Prahy 170, CZ 252 42 Jesenice tel.: +420 241 932 073, +420 241 932 269, +420 241 931 828, +420 241 931 965, +420 602 309 497, +420 602 309 498 e-mail: [email protected] CONTACTS www.jiva.cz Manufacturer of stainless steel equipment for health service establishments and catering industry. Founded in 1935. The Czech family firm JIVA JIRÁK is one of the largest companies in this branch in the Czech Republic. Technological processes used in the manufacture are based on the most advanced technologies implemented on top-level machinery and operated by a highly qualified staff trained at foreign companies. All products are made of high-quality stainless steel and meet the European public-health standards. The company‘s products are characterised by the high quality and its name has earned a very good reputation on the domestic and foreign markets, which is the trend that we are trying to maintain and develop. All products that we offer are made of high-quality stainless steel materials with required certificates and documents. The material used in the production is composed of foreign-made stainless steel sheets 18/8 Cr/Ni /17240 and 17241/ of top-level quality. It is non-magnetic sheet metal specially designed to be used in the health service establishments and food industry, and thus having the required certificates. Since 2002 the company has been in possession of the Quality Management System certificate ISO CSN EN 9001:2001, and since 2003 it has been a holder of the National Security Authority certificate entitled “Reserved“, 1st grade, which enables the company to implement orders for the Army of the Czech Republic. Owners of comapny: Ladislav Jirák, Václav Jirák Jr., Václav Jirák (from the left) Product range for the health service establishments • Wide range of stainless steel furniture for health service facilities • Equipment for hot and neutral meals delivery • Stainless steel furniture for sterilisation departments • Atypical stainless steel equipment 52 Klaro, spol. s r.o. Klaro, spol. s r.o., Podolská 103/126, CZ 147 00 Praha 4 tel./fax: +420 241 431 266, +420 241 431 253 e-mail: [email protected] www.klaro.cz KLARO limited company is the Czech leading producer of cleaning and operating trolleys including the complete selection of accessories. At the time of its foundation in the year 1993 the company started its production by manufacturing of two sorts of simple operating trolleys. At present time, the company makes several product series of trolleys which involve more than one hundred basic sorts and several variant solutions. Thus the company nowadays supplies the market with healthcare, hotel and cleaning trolleys including the complete selection of stainless trolleys, trolleys for restaurants, laundries or warehouses. Original approach of the frame solving of the trolleys thus unables the potential customer with the help of modular parts to combine the single parts or the whole minor structures together and to create from the basic sort of trolley the one, which matches its service, capacity or aesthetic needs. Except the original trolley frames, the company KLARO limited takes pride in top quality of its products together with fast and flexible response to customer needs. If in the year of the company’s foundation the production was made with the help of basic machinery equipment, nowadays the company disposes of the top technology equipment, which together with the emphasis on use of quality materials, modern methods of management control and teamwork of highly professional workers unables the company to place on the market the pruducts of exceptional high quality with high utility value for the final customer. This strategy unabled the company KLARO limited to become within a few years not only one of the most significant suppliers of operating trolleys on the Czech market, but in the last few years also to become an important exporter of its products to many countries within the European Union and outside it. KLARO limited company is producer of healthcare, stainless, hotel, operating and cleaning trolleys. 53 CONTACTS Klášterní officína Ing. Marek Motyčka - Klášterní officína, Bezručova čtvrť 1115, Kuřim 664 34 tel.: +420 776 767 020, +420 776 565 309 e-mail: [email protected] www.klasterofficina.cz History The company Ing. Marek Motyčka - Klášterní officína was established in 2000. In the beginning was mainly the cultivation of medicinal herbs. Then, the company focused on the production and processing of herbs herbal supplements. The company wants to build on the tradition of medieval monastic pharmacies. Its aim is rediscovering forgotten recipes and financial support restoration of an important cultural and spiritual center of the Benedictine monastery in Rajhrad u Brna. Benedictine order is the oldest organized religious communities in Western Europe, which was founded in the year 529 by the St. Benedict. The first mention of the Benedictine monastery in Rajhrad u Brna dates from 1045. Hitherto, the only remaining nestarším a Benedictine monastery in Moravia. In 1465 the vineyards were founded and subsequently Cellars. From the 14th century. in the monastery begins to boil beer. The monks take care of the “Garden of Eden” with the planting of medicinal plants, which the brothers received the manufacture of medicinal liquors, elixirs, tinctures, salves and herbal teas. Centuries of experience with natural resources and have given rise to a harmonized proven recipes that are beneficial to humans today’s “hectic rush” Main Products: Herbal syrups All of our herbal syrups are registered as food supplements. Herbal syrups are currently manufactured in 45 species. They are sweeten with fructose . Fructose is also intended for diabetics, as it is a simple sugars - easily digestible. I’m sure you know Echinacea, Plantain or Buckthorn. These herbs can be found in our products. Our other products • • • • Herbal Liqueurs. Herbal drops. Herbal cosmetics. Jam with fruits and herbs. 54 CONTACTS Komora zubních techniků ČR, (KZT) Komora zubních techniků ČR, Ostrovského 253/3, CZ 150 00 Praha 5 tel.: +420 224 213 168, +420 602 224 298, fax: +420 224 213 168 e-mail: [email protected] www.komorazt.cz The Chamber of dental technicians in the Czech Republic is a professional, non-profit, voluntary, non-political civic association with legal standing. It is open to all dental technicians and assistants of dental technicians. The Chamber of dental technicians supports the profession of dental technicians and the operating standards in accordance with the general binding regulations and ethics. It supports the legitimate professional interests of its members by making legislative proposals relating to the industry and business conditions within the industry and profession. It advises on the rules of its members for conducting business, to meet the standards for the operation of dental laboratories. It mediates on technical issues that have become controversial for some reason between dental laboratories and third parties. It provides information in support of raising the skills of members and in the development field and if necessary can provide an expert in the field of dental technology. 55 CONTACTS KOVONAX spol. s r.o. KOVONAX spol. s r.o., Sušilova 477, CZ 768 61 Bystřice pod Hostýnem tel.: +420 573 378 379 (306), fax: +420 573 378 311 e-mail: [email protected] www.kovonax.cz The firm has had more than Hundred Years tradition and it was established in 1908 at Bystřice pod Hostýnem. Kovonax is a prominent Czech producer of furniture for medical and solicitous establishments. The main object is to achieve maximal satisfaction of the patient as well as of the attending personnel. The firm has had a long established quality system conformable with ČSN EN ISO 9001:2001 a ČSN EN ISO 13485:2012. Products of the company KOVONAX serve patients and personnel not only in many countries of European Union but also in Russia, Belorussia, Ukraine, Kazakhstan and Moldavia. • • • • • • Hospital beds Beds for solicitous establishments Hospital furniture Mattresses decubitus Accessories for beds Sitting furniture 56 CONTACTS LabMediaServis, s.r.o. LabMediaServis, s.r.o. , Národní 84, CZ 551 01 Jaroměř tel./fax: +420 491 810 090 e-mail.: [email protected] www.labmediaservis.cz Why buy prepared media? • Quality culture medium as the corner stone of a good diagnosis • Batch reproducibility – validation of the production method, guarantee of the composition, temperature, timing, volume etc. • Top quality control – each batch undergoes a series of tests of the sterility, celectivity and growth properities Why buy from LMS? • Advanced technology in a new complex equipped with HEPA filters • Our own ram herd, low price of the input material, low sell price • Possibility of custom made products – based on your recipe, ingredients of different companies, in tune with your workspace • Short-notice work – in cas of an urgent need we’re able to provide the medium in 24 to 48 hours Why LabMediaServis? • Production of brand new batches, higher colony-growth dynamics • ISO 9001, 14001 and 13485 on production of culture media and blood derivates • Quality certificate, media index, protocol of the tests run and a user manual come with each product Production method • Weighing of the dehydrated medium • pH check • Filling the preparator • Temperature selection • Adding blood, supplements, antibiotics • Connecting with the batching machine • Batching • Drying • Tests, check • Packing • Stroing and transporting • Producer and distributor of culture media 57 CONTACTS LASAK s.r.o. LASAK s.r.o., Českobrodská 1047/46, CZ 190 01 Praha 9 – Hloubětín tel.: +420 224 315 663, +420 233 324 280, fax: +420 224 316 051 e-mail: [email protected] www.lasak.com LASAK Ltd. is a research-oriented medical technology company, established in 1991 in Prague, Czech Republic. The mission of the company is the development, production and sale of medical devices. Currently LASAK is one of the leading Czech companies in the field of dental implantology and bone tissue regeneration. Since 1992, the research and development of bioactive materials for bone-tissue replacement has been carried out systematically at LASAK in cooperation with universities, research institutes and major clinics in the Czech Republic and abroad. Results of the research have then been used in the development of new products, which successfully entered the market. These products are now widely used in clinical practice, especially in the fields of dental implantology, maxillofacial surgery, orthopedics, neurosurgery, as well as in other fields. An important product line consists of resorbable and nonresorbable materials for bone regeneration based on calcium phosphates (e.g. PORESORB®-TCP, OssaBase®-HA). Significant progress has been achieved by the development of surface-treated bioactive titanium, which exhibits unique properties enabling faster, safer and more predictable implant healing. This new biomaterial has been successfully used in the production of dental (IMPLADENT® and BioniQ®) and spinal (IMPLASPIN) titanium implants. The development results and clinical evaluations are widely documented in a number of research and clinical studies published in professional journals, conference proceedings and monographs. • • • • Dental Implantology Neurosurgery Bone Regeneration The 20-year history of LASAK is one of creative, tenacious people – people helping clinicians and patients apply technology to achieve new levels of treatment success and quality of life 58 CONTACTS LINET spol. s r.o. LINET spol. s r.o., Želevčice 5, CZ 274 01 Slaný tel.: +420 312 576 111, fax: +420 312 522 668 e-mail: [email protected] www.linet.com LINET spol. s.r.o. is a leading global manufacturer and distributor of beds for hospital and nursing-care settings. The company was founded in 1990 by Zbyněk Frolík; its manufacturing facilities and corporate headquarters are located in Želevčice u Slaného, Czech Republic. Annual production capacity is 80,000 beds, over 90 percent of which is exported to more than 100 countries around the world. In addition to beds for hospital and nursing-care settings, LINET also manufactures passive and active systems for the prevention and treatment of pressure ulcers, as well as hospital furniture and mobiliary. The company’s product portfolio is rounded out with a sophisticated offering of comprehensive services, including educational and training activities for caregivers, an advanced system for monitoring the technical status of beds, and consultancy in the interior design of clinics and patient rooms. LINET is a technological leader in its field. Thanks to its intensive collaboration with healthcare professionals, the company regularly unveils innovative solutions that contribute to a greater level of comfort and safety for patients and caregivers alike. By integrating unique features and functions with outstanding design, LINET has forged a path to success in international markets. In 2011, the owners of LINET, together with their longstanding strategic partner Wissner-Bosserhoff GmbH, a German manufacturer of nursing care beds, established the holding LINET Group SE. Today, the holding employs approximately 900 people in the Czech Republic, Germany, Belgium, Holland, France, Italy, Spain, Great Britain, Sweden, Russia, the USA, Mexico, Brazil, and China. Thanks to its extensive distribution network, LINET Group SE has also launched successful undertakings in other markets in South America, Africa, the Middle East, and India. With an annual production capacity of 120,000 beds is LINET Group SE the European market leader. Product portfolio: • Intensive care beds • Universal hospital beds • Hospital furniture • Social care beds • Home care beds • Pressure sore mattresses • Social and nursing home furniture • Hospital and social care equipment 59 CONTACTS Martek Medical a.s. Martek Medical a.s., U Spalovny 4582/17, CZ 796 01 Prostějov tel.: +420 582 400 000, fax: +420 582 400 001 e-mail: [email protected] http://martekmedical.agel.cz The key business activities of the Martek Medical a.s. company include comprehensive solutions with regard to the sale of healthcare consumables, paper programme, detergents and disinfectants, as well as the sale of special healthcare materials to healthcare facilities in the Czech Republic. Thanks to its stable and strong partner – the AGEL group – and extensive distribution network, the Martek Medical a.s. company has become Czech and Central European leader with regard to selected commodities. The quality of the company’s products, processes and services is proved and documented through three significant certificates. In June 2006 the company successfully passed the ISO 9001 certification process which addresses quality management systems. In addition, the company was awarded in 2007 the ISO 14001 certificate on the environmental management system and the OHSAS 18 001 certificate on the occupational health and safety management system. Having combined the three aforementioned certificates, the company implemented an integrated management system, which is subject to periodical recertification – allowing the Martek Medical a.s. company to offer the highest standards of quality of its products, processes and services. We strive for the continuous growth of the company, continuous development of products tailored to the needs of individual types of customers, or the improvement of the position of a strong and independent distributor of medical devices on the Czech market. This is why a technological service department was founded in our company. Its services include the deliveries of equipment and investment units, thereby allowing the company to provide services with an added value to healthcare institutions within the AGEL a.s. group as well as to other customers of Martek Medical a.s. This department provides post-warranty servicing and regular inspections of apparatuses through qualified technicians and specialised servicing partners. Martek Medical a.s. BRANCHES: • Třinec • Praha • Prostějov 60 CONTACTS MEDETRON s.r.o. MEDETRON s.r.o., Vavrečkova 5673, 54. budova, areál Svit a.s., CZ 760 01 Zlín tel./fax: +420 577 212 004 e-mail: [email protected] www.medetron.cz MEDETRON s.r.o. was established in 1992 as a developer and producer of modern measuring equipment for hospitals, surgeries & clinics, and other health or social care institutions. The company is focused on the development, production and sales of two key areas: medical measuring systems • urodynamic measuring systems Dynamic (for urologic, gynecologic and pediatric examinations), • Integrated Prenatal Care System for the diagnostics of premature labour in high- risk pregnancies expendable supplies for: • urology, • assisted reproduction, • gynecology, • other common purposes The business strategy is mainly based on our own innovative solutions and their implementation into practice. The company always works closely with doctors and nurses on developing new products in order to fully meet the needs of modern medical care in a functional and quality design. For the development and production of medical diagnostic devices, our company is certified according to Quality Management System EN ISO 9001:2008 and EN ISO 13485:2003. In the development and manufacturing of expendable supplies, the company cooperates closely with the Tomas Bata University in Zlín. In the distribution of expendable supplies, especially abroad, the company is interested in forming relationships with new business partners. • Urodynamic modular system • Prenatal Care System for diagnostics of premature labour • Expendable supplies and catheters 61 CONTACTS MEDIATRADE s.r.o. MEDIATRADE s.r.o., Havlíčkova 869/25, CZ 757 01 Valašské Meziříčí tel.: +420 737 784 177, fax: +420 571 619 677 e-mail: [email protected], [email protected] www.mediatradecz.eu Company MEDIATRADE Ltd. Main focus of our company is production of external pacemakers. We are successfully delivering our products for more than 20 years. We are continuously improving our products with medical doctors. Based on their requirements we are launching new lines of our pacemaker EPG 10. EPG 10 BIPHASIC (cardiology, cardiac surgery) EPG 10 MONOPHASIC (cardiology, cardiac surgery) EPG 10 MULTIFOCAL - ESOPHAGEAL (cardiology, cardiac surgery) EPG 10 NEUROSTIM (anesthesiology) EPG 10 BIPHASIC, MONOPHASIC, MULTIFOCAL - single chamber external pacemaker that preserves the required pulse of the patient. EPG 10 NEUROSTIM - neurostimulator designed for blockades of the peripheral nerves. All our products are available at affordable prices and they fulfil all the clinical requirements for this type of devices. Our devices are known for reliability, long service life, easy maintenance and also simple and safe manipulation. Company MEDIATRADE Ltd. distributes products for following specialties: • • • • Cardiology Cardiac surgery General surgery Operating rooms • • • • Anesthesiology Radiology Gastroenterology Neurosurgery The creed of the company is satisfaction of the customer achieved by quality product at affordable price, fast delivery time and quality service. 62 CONTACTS MedFinance Magellan, s. r. o. MedFinance Magellan, s. r. o., Šárecká 33, CZ 160 00 Praha 6 tel.: 233 931 678, fax: 233 931 677 e-mail: [email protected] www.magellan.com.cz MedFinance Magellan s.r.o. is a financial institution which operates in the field of financial services in medical sector on the Middle European market. Enterprise Investors that manage the biggest group of mutual funds in the Middle Europe give us the base for capital security. The shares of our mother company Magellan S.A. are traded on the Warsaw Stock Exchange. Exclusive groups for our financial services are health care suppliers and medical facilities. What can be acquired using our services? - improving business relations with hospitals by tripartite negotiations - unblocking liability limits after maturity date and therefore increasing the client’s sales in medical facilities - lowering the risk of late payments or non-payments - improving cash flow - secured planned cash flow - by cutting the time limits you would not have to create recoverable amounts For the time period up to 31. 1. 2012 we have prepared a special offer of guarantees, loans, factoring service and restructuring of your liabilities towards medical facilities, especially hospitals. What can we offer? We offer guarantee of liabilities against medical facilities. In case the claim was not paid, we shall pay for the hospital. We will arrange the payment limits and conditions with each medical facility. The hospitals are given the right of choice to pay the suppliers or to establish a long-term timetable of repayments with MedFinance Magellan. We can offer a loan requiring the only liability – claim liability for the medical facilities. What is common for our services ? - the priority is to keep good relationships between the supplier and the medical facility minimum of formalities and quick negotiations flexible adaptation to client’s requirements and particular business relations security and transparency of business partnership - we guarantee that received liabilities are not rendered every offer is custom made to a particular client and his business partners Factoring – we will finance your sale of goods to hospitals and take over every payment related risk. We will buy overdue claims from you. The advantages of transferring the liabilities: - preserving good relations with customers MedFinance Magellan does not recover liabilities but prefers conciliation with the offer of financial services for hospitals - most of the contracts are non-recourse based, our company takes over all the risks of not paying the liabilities - short time period of claim payment, in the time period up to 31. 1. 2012 it is 7 days from signing a contract - attractive price with margin from 3 % of the value of the liability, we increase the margin only in case of worse rating of a medical facility Do not hesitate to contact us in case you are interested! 63 CONTACTS Medical Fair Brno, Rehaprotex Medical Fair Brno - Central Europe / Rehaprotex Organiser: BVV Trade Fairs Brno, Výstaviště 1, CZ 647 00 Brno tel.: +420 541 152 818, fax: +420 541 153 067 e-mail: [email protected], [email protected] CONTACTS www.medicalfair.cz, www.rehaprotex.cz MEDICAL FAIR Brno International Fair for Medical Technology and Healthcare REHAPROTEX International Fair for Rehabilitation, Compensation and Prosthetics Aids Date: 12–15 May 2015 Venue: Brno Exhibition Centre, Czech Republic Basic information BRNO MEDICAL FAIR and REHAPROTEX have been a traditional and important meeting place for domestic and foreign suppliers to the providers of healthcare, rehabilitation and social care. These trade fairs are part of the “Medical Summit Brno”, when dozens of conferences, congresses and seminars are held on a variety of specialized topics. REHAPROTEX, which represents a wide range of compensation, prosthetic, orthopaedic and rehabilitation equipment, with services in the field of wellness, offers for seniors and presentations of social services, does not have any competition anywhere in Central Europe. 64 MEDICAL TECHNOLOGIES CZ a.s. MEDICAL TECHNOLOGIES CZ a.s., Radimova 2342/36, CZ 169 00 Prague 6 e-mail: [email protected] www.medictech.com, www.btlnet.com Medical Technologies CZ a.s. is involved in the development and production of BTL brand-name devices. The main development and production portfolio includes products for physiotherapy, cardiology, pneumology and medical aesthetics. Products for physical therapy include electrotherapy, lasers, ultrasounds, magnetic therapy, pressotherapy and manufacture of couches and whirlpools. Its cardiology segment offers a wide range of electrocardiographs, software solutions, and products for holter monitoring. Pneumology products include a desktop spirometer and spirometry options for ECGs. Aesthetic medicine division offers cutting edge technologies for fat-dissolve, skin tightening, anti-cellulite and anti-wrinkle care. The newest device of aesthetic medicine - Vanquish -is a revolutionary non-contact Selective RF™ system for non-invasive body contouring and fat removal treatments. The pain-free procedure with its safe and consistent results is tailored to modern clinical practice needs. With over 20 years of experience in design and manufacturing of medical equipment, the company offers the most advanced technology available in physical therapy. The products are supplied to more than 100 countries. The major markets include Europe, United States and East Asian markets. For more information, please check BTL corporate website at www.btlnet.com. The products have been ISO and CE certified, and many of them cleared by US FDA, as well as by number of other regulatory bodies. It is innovative nature of the company, drive and determination of its employees that make BTL fast growing company. • • • • • Physiotherapy Shockwave therapy Cardiology Pneumology Medical aesthetics 65 CONTACTS MEDILA s.r.o. MEDILA s.r.o., Dominikánská 25/14, CZ 301 00 Plzeň tel.: +420 377 242 209, fax: +420 377 242 209 e-mail: [email protected] www.medila.eu The company Medila is the exclusive distributor of the latest technology in cosmetic medicine, physiotherapy and balneology. In the specialized workshop and beauty salon in the center of the city Pilsen, they introduce all its product offerings. The main products distributed by Medila is an ultrasonic cavitation with vacuum massage VaCaVITE Prestige, a successful device for easy removal of body fat after just one use. Among other products for cosmetic medicine include lymphatic drainage, pulsed light, radiofrequency, and more. In the field of balneology is a novelty Ocean de Luxe PC, modern whirlpool tub with a touch screen controlled by Windows system. The company Medila also sell medical supplies and ultimately provides maintenance and servis of all medical devices. 66 CONTACTS MEDIN, a.s. MEDIN, a.s., Vlachovická 619, CZ 592 31 Nové Město na Moravě tel.: +420 566 684 336, fax: +420 566 684 385 e-mail: [email protected] www.medin.eu MEDIN is the biggest Czech producer of humane-medicine implants and instruments. The complete offer includes solution for all main medical fields, esp. implants for traumatology, dental instruments, both rotary and surgery, and surgical instruments. A long-standing tradition of medical instruments production, founded as early as 1949, has established a know-how that enables us to take a leading position in the Czech market and also to compete successfully with foreign producers. Satisfied customers that have chosen our company with expectation of fulfilling their wishes and needs are our highest priority. As a means to the customers satisfaction we choose quality that is above all of the other criterions and it is a main condition of the competitiveness. To meet the customers´ demands we use the quality system corresponding with provisions of the ČSN EN ISO 9001 international standard and also ČSN EN ISO 13485 for medical devices. In the area of environment protection, the compliance with international norm ČSN EN ISO 14001 Systems of Environment Management is ensured. According to the legal standards for the product distribution either to abroad or to the local territories, there are all the processes prepared for their fulfilment. We are authorized to mark our products by international marks of the Czech Republic, Russia and Ukraine and also by the CE Conformity mark. Traumatology • bone screws • plates • angularly stable plates • small-implants for bone fragments fixation • nails • dynamic hip and condylar screws • implants for acetabular protrusion • reconstruction of ligaments • instruments for traumatology Dentistry • dental instruments • rotary instruments • laboratory instruments Surgery • diagnostics • cutting instruments • scissors • forceps • clamp-forceps • bone rongeurs • grasping forceps • hook, retractors • spatulas • specula • elevators • raspatories • spoons • curettes • saws, files • chisels, mallets • drills, burs needles, needle holders • probes • trocars, suction tubes • dilators • special instruments • sets • others 67 CONTACTS MEDIPO – ZT, s.r.o. MEDIPO – ZT, s.r.o., Kohoutova 24, CZ 613 00 Brno tel./fax: +420 548 525 348 e-mail: [email protected] CONTACTS www.medipo.cz The company MEDIPO - ZT, s.r.o. (Ltd.) was founded in 1996. In the field of medical technology, which is the priority, the company provides for the development, production, and service of its own products. The MEDILIT lithotriptor is a powerful device especially designed for noninvasive removal of concrements in the kidneys and the urinary and bile ducts using a focused shock wave. It can also be used in the urological surgery, the therapy of Peyronie’s disease and in the treatment of various orthopaedic conditions. The machine is operated from the control room and the entire therapy process is computer-controlled. The staff is thus protected not only from the x-ray radiation but also from the acoustic manifestations of the shock wave. The table top is motor-driven and can be positioned multidirectionally in all three axes (x,y,z). It can be tilted to the Trendelenburg position to facilitate the determination of the optimum point of entry of the shock wave into the patient’s body. An x-ray and ultrasound (optional) direction systems are available for concrement localization. Both systems can operate in conjunction, which considerably reduces radiation burden in continuous monitoring of the quality of localization and of the therapeutic effect. Paediatric vaginoscope MT 1000 with cold light source MT 2002 is designed for easy gynecological examination of children and adults. With the vaginoscope it is possible to see the changes on the vaginal mucous membrane and on the cervix, or an alien body and its positioning can be seen. Rektoskope MT 1100 is designed for basic examination in the area of rectum. Amnioskope MT1200 enables executing of an amnion, amniotic fluid and foetus part. The company MEDIPO - ZT, s.r.o. has assessment of full quality assurance system pursuant to Annex II to Directive 93/42/EHS. This quality management system is applied to all activities, starting from the design, development, production, and services related to the supplies and service. 68 MEDIPROGRESS, spol. s r. o. MEDIPROGRESS, spol. s r. o., Vrbovská cesta 17, SK 921 01 Piešťany tel.: +421 337 624 420, fax: +421 337 625 010 e-mail: [email protected] www.mediprogress.sk MEDIPROGRESS, s.r.o. Piestany, SLOVAKIA was founded in 1996 and fully expanded its activity beginning 1997. The corporation has been registered as a Limited Company in accordance with the Slovak Commercial Law. Its staff is formed by experienced and educated business professionals who have been involved in foreign trade for long time, particulary export of medical appliances. Within a short period the company has gained a status of a reliable and fair business partner on local and foreign markets. The main goal of MEDIPROGRESS is to provide full consulting, business and technical services to clients buying medical equipment and materials. For that purpose we continuously expand our own production of medical equipment. Thanks to this we are able to supply the appropriate items to our customers with reference to the utility function they expect under adequate marketing and service conditions. MEDIPROGRESS owns two production plants right now: • Chirana Progress Piestany – production of hydrotherapy, inhalation and X-ray diagnostic equipment • Chiradent, s.r.o. Piestany – production of dental units and chairs Thanks to customer-oriented marketing and sales strategy, MEDIPROGRESS has soon gained wide range of customers since its foundation. Regular and significant deliveries were effected and are still being realized to some of our clients below: • • • • • Ministry of Health of Russian Federation Ministry of Health of Kazakhstan World Bank / European Bank for Reconstruction and Development Slovak Institute for Heart and Vascular Diseases University Hospital in Kosice, Eastern Slovakia Main activities: • Export and import of medical equipment • Production of dental units, chairs and diagnostic X-ray machines • Supplies of disposable itmes for medical purposes • Sale of diagnostic devices and medical electronics • Production of physiotherapeutic tubs, rehabilitation equipment and inhalators • Complete supplies for hospitals, clinics and private physicians 69 CONTACTS MEDISET-CHIRONAX s.r.o. MEDISET-CHIRONAX s.r.o., Boženy Němcové 54, CZ 370 01 České Budějovice tel.: +420 387 311 874-5, fax: +420 387 311 872, GSM: +420 777 126 381-2, e-mail: [email protected] www.mediset.cz The Company Mediset-Chironax s.r.o. has been active on the medical equipment market for more than 17 years. In the course of this period, a stable and wellexperienced team of business and technical specialists has been established. Mediset-Chironax s.r.o. it the holder of the QMS Certificate of Quality (ISO 9001: 2001), a member of The Association of Manufacturers and Sellers of Medical Equipment as well as a member of the Czech Chamber of Commerce. Our business philosophy consists in sustaining a broad range of products showing a good use value – quality - price ratio. We have been eager to avoid extremely cheap products, unless their advantageous price is accompanied by a sufficient quality, use value and service support. Most of our products are supplied to hospitals including teaching hospitals, private clinics and health centers, health institutions run by the Ministry of Defense and the Ministry of Interior Affairs, medical schools and medical faculties. The amount of our supplies to private medical practices, spas, seniors´ homes, rehabilitation centers and the general public has also grown. 70 CONTACTS MEDKONSULT, s. r. o. MEDKONSULT, s. r. o., Balcárkova 1258/8, CZ 779 00 Olomouc tel.: +420 585 414 511, +420 585 411 273, fax: +420 585 416 045 e-mail: [email protected] www.medkonsult.cz Medkonsult company was founded in 1992, when the experienced developers and doctors in urodynamics and ultrasonography gathered into specialized company. A full range of devices for Czech and Slovak market was produced, the export into foreign countries begun in 2005. We use a model of close cooperation with independent distributors, some of them sell our devices as OEM products under their own trademark (DANTEC Dynamics, BUCK Elektromedizin). Our innovative activities are very strong thanks to direct cooperation with specialists in hospitals as well as in private cliniques. Nowadays, the most modern electronic components are used and our developers are able to tailor a device according to customer´s requirements and needs. We are able to offer the widest spectrum of equipment for urodynamics and anorectal measurement which can be connected with imaging device (videourodynamics). It can be an X-ray videourodynamics as well as pelvic floor ultrasonography simultaneously scanned with urodynamics or anorectal manometry. Unique feature is the possibility of inbuilt ultrasonographic module (B ModeoColor Flow mapping) into our urodynamic devices and thus the possibility of complex functional and anatomical examination of urogenital tract. Medkonsult is also exclusive distributor of BK Medical company, the Danish producer of high quality ultrasound systems. BK Medical is a part of Analogic corporation and uses its unique technology for construction of excelent quality and ergonomical systems with great price-utility ratio. The whole range of ultrasound equipment is unique and is offered by BK Medical only. BK Medical ultrasound systems are traditionally focused especially on urology, surgery and interventional use. There are also speical applications as ultrasoundguided brachytherapy for which Medkonsult produces specialized steppers and other equipment. Recently, a new generation of BK Medical devices has been focused on radiologic/ general ultrasound application, and on obstetrics and fetal medicine or musculoskeletal application. New field is the usage of ultrasound in anesthesiology. Medkonsult cooperates with experienced specialists and our customers are thus provided with specialized courses and workshops. Medkonsult can also offer other products, developed on customers´ requests, e.g. CondaTest systems with terminals for wireless connection for knowledge testing, voting, e-learning activities etc. Medkonsult offers complex diagnostic solutions, education and educational technology. There is our branch office in Prague and Slovak Republic (Trencin). • Development, production, sales and service of urodynamic devices • Exclusive representative of BK Medical ultrasound systems for Czech and Slovak republic • ISO Certification 9001:2000, 13485:2003 • Education and training centre for doctors and medical staff 71 CONTACTS Merci, s.r.o. Merci, s.r.o., Hviezdoslavova 55b, CZ 627 00 Brno tel.: +420 548 428 411, fax: +420 548 211 485 e-mail: [email protected] www.merci.cz MERCI, s.r.o. is a production-and-trade company that employs 70 to 80 people. The company’s scope of activities include design, manufacturing, provision and delivery of laboratories and chemical facilities to science and research institutions, colleges and universities, chemical and pharmaceutical industry and healthcare, and the provision of control and service laboratories for all kinds of business sectors. The company’s manufacturing activities are linked to research and development activities that result in the introduction of new products and technologies to the company’s product portfolio. As far as design and projecting of laboratory facilities are concerned, the company is known for its complex approach towards laboratory projects that already include furniture, exhaust hoods, necessary laboratory technologies plus recommended methodologies and procedures, instrumentation and the subsequent provision and delivery of consumable supplies. The MERCI, s.r.o. company has been a provider of laboratory equipment since 1993. Every year the company handles several hundred successful projects of all sizes and of various levels of significance. Furthermore, it provides professional sales services to more than 2,000 clients. These services include sales and consultancy services. They are provided by experienced employees who must have knowledge of, and experience from, various business fields. The company is also an authorised service provider with respect to the equipment and technologies the company provides. A key milestone was the company’s decision to manufacture its own brand of specialpurpose laboratory furniture, including exhaust hoods and wall units. Since 2004 the company has been manufacturing these components in its own factory building and it even has its own design department whose role is to prepare manufacturing processes and to deal with research and development of new products that reflect today’s needs and demand for working conditions in all types of laboratories, as well as products that support the investors’ efforts to establish flexible, modern and energy-saving facilities. For several years now, the company has focused on the development of a modern and energy-saving exhaust hood. The company operates its own design centre for the purpose of design activities and technology projects. Its assets include a team of trained experts in a broad scope of laboratory-related issues. The company cooperates with hundreds of manufacturers of special-purpose laboratory equipment and pilot equipment, as well as with numerous specialised Czech and foreign contractors. The company enjoys a strong position on the Czech and Slovak markets and it also attempts to succeed on foreign markets, in order to exploit its extensive knowledge and expertise. Its unique approach and high level of expertise and maximum complexity have won the company most major projects in the respective business sector. Out of hundreds of references the company especially values the provision of equipment for laboratories of the Masaryk University campus in Brno or for the University of Pardubice campus; the provision of laboratory equipment for the 1st Faculty of Medicine of Charles University in Prague, or equipment for the laboratories of the Znojmo hospital, or equipment for service and control laboratories (and the related harmonised methodologies) for the Hill’s company in Hustopeče, etc. The activities of the MERCI s.r.o. company are based on extensive knowledge, the ability to solve complex issues as a team and to absorb new trends from the area of laboratory technologies. The company is certificated according to the norms and quality standards OHSAS 18001:2007, ISO 9001:2000, ISO 14001:2004 and ISO 13485:2003. 72 CONTACTS Miele, spol. s. r.o. Miele, spol. s. r.o., Spielberk Office Center, Holandská 4, CZ 639 00 Brno tel.: +420 543 553 111, fax: +420 543 553 119 e-mail: [email protected] www.miele.cz Messrs. Carl Miele and Reinhard Zinkann established the company Miele in 1899. At the present time the company has been managed by the fourth generation of the family. The company Miele manufactures top-class washing and disinfecting automatic machines for preparation of medical instrumentarium or laboratory glass, washing and disinfecting automatic machines of the Discher system for bedpans as well as professional laundry machines (washing machines, driers, ironing machines) and professional dish washers. Mechanical preparation of OP instrumentarium for laboratory glass in washing and disinfecting automatic machines Miele provides safe, standardized, documentable and validable course with optimal performance and high economy. Using intensive user – technical research and close co-operation with hygienists, OP instrumentarium manufacturers and users, the company Miele gained leading position in the innovation market. As soon as now, the new generation of Miele appliances meets the requirements of the international standard pr EN ISO 15883-x. Interleaved washing and disinfecting automatic machines have already been installed in more then 40 central sterilisation stations in the Czech Republic. The company Miele also offers washing and disinfecting automatic machines of the Discher system for bedpans, ducks, stool bowls, chamber pots for children and kidney-shaped bowls. The machines are used mainly in hospitals, rest homes, social care institutes, etc. In the sphere of professional care for textile, the company Miele offers professional automatic washing machines with capacity of 5,5 up to 32 kg of wash, optimally completed with professional driers and ironing machines. The absolute top-class section of the production program for laundry appliances Miele includes automatic washing machines with capacity of 10 – 32 kg with freely programmable control unit Profitronic M, being also produced with the capacity of 24 and 32 kg – the hygienic interleaved variant for hospital and institutional laundries. In the field of dish washing, the company Miele offers professional dish washers with fresh water intake system for each washing stage as well as tank dish washers with hot water reservoir. Produc on program • Single-door or interleaved washing and disinfec ng automa c machines for prepara on of OP instrumentarium or laboratory glass • Washing and disinfec ng automa c machines for bedpans, ducks, stool bowls, chamber pots for children and kidney-shaped bowls • Professional automa c washing machines, driers and ironing machines for industrial and hospital laundries • Professional dish washers with thermic disinfec on 73 CONTACTS MORAMEDICA SE MORAMEDICA SE, Martinický palác, Hradčanské náměstí 67/8, CZ 118 00 Praha 1 - Hradčany GSM: +420 724 241 575, +420 724 090 009, fax: +420 227 077 187 e-mail: [email protected] www.moramedica.cz Company Profile The European company MORAMEDICA SE was established as a trading and manufacturing company at the beginning of 2010. The company is based on purely Czech capital. MORAMEDICA SE company gained exclusive representation of leading domestic and foreign producers of medical devices in the Czech and Slovak Republics. MORAMEDICA SE also implements built-in clean rooms and delivers even the complete medical facilities. We have developed our own comprehensive program of the mobile medical facilities. Thanks to cooperation with financial institutions our company provides its customers an opportunity of the supply funding. Basic offer • Supply of clean rooms • Opera ng and examina on lights • Distribu on systems of medicinal gases • Opera ng tables • Pa ent trolley and surgery trolley systems • Anesthesia equipment • Lung ven lators • Pa ent transport trolleys • Stretchers • Medical carts • An -decubitus program • Consumable supplies • Nanotechnology with a focus on products with an bacterial,fungicidal and virucidal effects • Stainless steel furniture and medical facili es equipment • Filtering systems for medical facili es • Assembly works related to the supply of medical facili es • Deliveries of small medical units • Consul ng and advisory services in construc on and equipping of health facili es 74 CONTACTS MTE spol. s r.o. MTE spol. s r.o., Hybešova 43, CZ 620 00, Brno tel.: +420 543 432 400, fax: +420 543 432 405 e-mail: [email protected] www.mte.cz www.inzulinova-pumpa.cz MTE Ltd. is a modern, dynamic company, dealing from 1991 with development and distribution of medical aids for diabetic patients and patients with vessel disorders. During its long-lasting existence it became one of the leaders in distribution of medical aids for diabetics and became one of the biggest companies operating in the area of specialised distribution in the Czech Republic. The main activity of MTE company is a reliable distribution of our products in the pharmacies, medical aids shops, hospitals, ordinations, to patients and also marketing support of these products. The companies and products, which we represent in the Czech Republic, are of top quality in their areas (Johnson & Johnson - division LifeScan, Roche, Abbott, Bata, Bio-Rad, Loana, Eli Lilly, Novo Nordisk, SOOIL). MTE company deals also with development of medical aids. Among our own product, e.g. one of the first glucometers in the Czech market or pen for capillary blood sample taking from fingertip can be found. At present, we produce very popular diabetic socks Diacomfort. MTE also - except of development and distribution of certain products - runs a shop of medical aids and pharmacy, which both offer complete assortment of remedies, food supplements, cosmetics and medical aids for patients at attractive conditions. More informa on you can find on websites: www.mte.cz www.inzulinova-pumpa.cz 75 CONTACTS M.T.Z. s.r.o. M.T.Z. s.r.o., Koněvova 19, CZ 130 00 Praha 3 tel.: +420 724 890 808, fax: +420 222 582 010 e-mail: [email protected] www.mtzcz.com M.T.Z. Ltd. Is a Czech company its main activity is export of medical equipments and supplies to Iraq. The company was founded in 2010 and now is planing to manufacture selected and necessary materials for healthcare for export. M.T.Z. Ltd is registered in the Ministry of Health in Iraq, wher is cooperating with its sister company “Aldaman Alhandasi” to secure marketing and service activities and preparing offers for private and regional demand. Our other cooperation is with “Medical Solutions Scientific Bureau” to secure the public and state tender agenda. In Iraq we are home and active in the market since 2003. Our company has a large team of professionals covering entire the country and especially the capital city Baghdad and the southern provinces of the country. Our motto is to provide the best service and after-sales service. Now we can consider M.T.Z. Ltd. as one of leading Czech provider of medical technology to Iraq. It is also important to note that due to demand in the Iraqi market, M.T.Z. Ltd. expanded its objectives and established three of its subsidiaries in the Czech Republic, which are active in other fields such as construction, energy and general trade (MZ Construction Ltd., MT Energy Services Ltd., TM General Trading Ltd.). 76 CONTACTS MZ Liberec, a.s. MZ Liberec, a.s., U Nisy 362/6, CZ 460 01 Liberec 3 tel.: +420 488 040 111, fax: +420 488 040 326 e-mail: [email protected], [email protected] CONTACTS www.mzliberec.cz We are Czech private company having a long-term manufacture experience since 1958. We are focusing our production scope on installation of final elements to medical gas distribution systems, including gas sources, gas pipeline network and medgas power supply units. We also produce lights and spring balance arm systems being able to carry any lights, cameras, monitors, touch scren panels and other medical equipment. We offer all-inclusive options like project engineering study, interior design, build-up, manufacture, final assembly on-site as well as after-sale services. We have strong and flexible team of designers-engineers who are able to provide a full customized solution. We comply international directives and rules related to medical devices concerned and medical gas distribution system. We use first-class materials and apply latest technology in production processing, which contributes to a protection of environment. We provide all-in-one assistance to our customers through authorized dealers located on-site. 75 Pct of our products are exported to about 40 countries worldwide. We are reliable and long-term partner for healthcare professionals worldwide. Duo ceiling pendant solution within operation theatre PRODUCT PORTFOLIO: • Bed head units • Ceiling pendants • Medical beams • Supply columns • Spring balanced arm system • Surgical lights • Medical gas source sta ons • Gas distribu on elements, accessories Bed Head Unit - children´s option (RN07-DN3) Star Light 160 with camera and arm system SPR-11 Duo Production facility and R&D center since 2013 77 NanoTrade s.r.o. NanoTrade s.r.o., Mozartova 178/12, CZ 779 00 Olomouc office: Polská 48a, CZ 779 00 Olomouc tel./fax: +420 585 221089 e-mail: [email protected] www.nanotrade.cz, www.nanosilver.eu Czech innovative company specialized in applied R&D of technology, materials and commercial products which use the nanotechnology. Our core business are products and technology with Antibacterial effects and Material surface treatment. The representatives of our traditional products are products with our brand name nanosilver® both textiles (clothes, fabrics, filters) as well as intermediates and products from polymers (packaging, foils, plates) or healthcare products (gels, oitments, desinfectants, protective devices for wound healing). Thanks to the support and close cooperation with research institutes in the Czech Republic, EU, USA and Asia we have been operating in a practical test, but even in its applied development samples of new materials, technology and application processes at all levels. These activities are also completed by laboratory and practical testings, certifications and appovals. The complexity of our services in the field of nanotechnology is supplemented by providing of new materials, marketing and market analysis, technology transfer preparation and realization, consultation and advice. Furthermore, we organise technical seminars for experts from R&D, OEM´s and manufacturers. Our company is also co-founder of the Czech Nanotechnology Cluster and member of CSNMT (the Czech Association for new Materials and Technology) and brings these links to the projects. Company is active in range of research of commercial projects in the Czech Republic. Other activities of the company in the area of nanotechnology deal with providing new materials, marketing and analyses, defining and preparing projects, application implementation, defining manufacturing processes, relevant marketing, consultation services and trading activity in nanotechnology products. • Func onal tex le clothing with an bacterial effect with the brand nanosilver® • Veterinary applica on for wound healing with the brand TraumaPet® • Paints and technology for surface treatment with bacterial, fungi and virus protec on • Technology for clean rooms and material protec on (nanosilver® and NanoDEO) 78 CONTACTS ORTEX spol. s r.o. ORTEX spol. s r.o., L. Váchy 173, CZ 760 01 Zlín tel.: +420 577 011 272-4, fax: +420 577 011 275 e-mail: [email protected] www.ortexzlin.cz An effective tool for treatment of damaged joints and ligaments The company was founded in1990. Since the beginning of its existence it targeted on highly professional and quality service in the production and deliveries of braces designed for post-operative and conservative treatment of damaged joints and ligaments. During the production we are permanently cooperating with head doctors of clinic departments and also with relevant institutions abroad. The range of products is being constantly enlarged with new products. ORTEX products are also used for the first treatment of injuries in emergency rooms of surgeries, orthopedic departments and traumatology centers. The company is certified in the quality management system in compliance with EN ISO 9001:2008 EN ISO 13485:2003. The products are tested in clinics before their launching on the market. During its existence the company became famous worldwide in its field. The products correspond with all requirements of technical and hygienic norms and the materials used guarantee to patients comfort even in climatically demanding conditions, while not irritating even the sensitive skin. One of major activities of the company Ortex, Ltd. is the export. We offer not only our own range of products for exportation, but also production of braces according to special requests of clients. At the moment the company is successful not only in Europe, but also in Russian Federation, Asia and the Balkans. The good quality of products, constant enlarging of the product range and markets offer good guarantee for next development of the company. • Development, modern design and series production of braces used for treatment after injuries of joints and ligaments for conservative and post-operative treatment, as well as for rehabilitation • Products sales 79 CONTACTS Parabel s.r.o. Parabel s.r.o., Padělky 192, CZ 763 17 Lukov tel.: +420 577 112 060, fax: +420 577 911 505 e-mail: [email protected] www.parabel.cz The company Parabel was founded in 1996 as a limited liability company. In the course of development the company split up into two divisions. One division occupies with production of engineering products from metal, rubber, plastics and their combinations. The second division products medical means. The main activity of this division is development, construction, production and a service of medical means as a customer wishes. We are able to work out an optimal offer of our products according to designs, models and producing materials of our customers. We assume complite realization of commission from a demand to delivery at a place of destination. The clarification of technical details is a matter of course for us, as well as a permament careful inspection of quality during the whole production process. Nowadays, we occupy ourselves with the development of system which enables to carry out effective locomotory therapy in rehabilitation centres or at home. Our effort is to help the patients who have lower ability of walking or stopped walking after a disease or an accident. We try to improve this ability and to provide a system which is user-friendly for both patients and therapists. All types of medical means are produced in accordance with European regulations and are certificated by CE certificates. The majority of our production is heading for export. The priority aim for us is satisfaction of customers with who we comunicate actively and their knowledge are used for next development and modernization of products. We deepen this connection by regular exhibitions of our products at selected trade fairs and using sales representatives. The company Parabel Ltd holds certificates ISO 9001:2008 and ISO 13 485:2003 80 CONTACTS PATRON Bohemia a.s. PATRON Bohemia a.s., Českolipská 3419, CZ 276 01 Mělník tel.: +420 315 630 111, fax: +420 315 630 199 e-mail: [email protected] www.patron.eu Company PATRON was established in 1995, in the town Melnik (35 km north from Prague). Melnik-region is very well known as the traditional place of baby and rehab equipment production. Thanks to the gradual and fast development the company right now consists of 2 divisions - Division REHA, Division BABY, with its own production facility and extensive distribution network covering more than 40 countries around the world. Division REHA - belongs to the major wholesaler and suppliers of specialized medical equipment (medical devices) in the Czech Republic. PATRON belongs to the major middle European manufacturers of rehabilitation equipment and medical devices. All products of company PATRON Bohemia a.s. fulfilled all legally requested standards and conditions, as well as widely requested EC Council Directive regulations. The company is ISO 9001:2008 certified. Design and production is focused to the high technical level of products, high level and fully functional design, high level of quality and especially good flexibility in combination of orders according to the customer’s requests. Thanks to the high quality and technical level of our products we have been awarded by number of prices on the shows and exhibitions. We co-operate with the best specialists of those branches from the whole Czech Republic and from foreign countries as well for many years. Those achieved awards and high interest in our new products persuade us about the right direction of our development. Our competition ability is based on the competitive price / use value ratio, high level and fully functional design, high level of quality and especially good flexibility in combination of orders according to the customer’s requests. Product range: • Wide range of multipurpose, fully foldable rehab-buggies • Wide range of multipurpose, fully foldable rehab-strollers • Wide variety of fixation and positioning accessories for buggies and strollers • Paediatric manual wheelchairs, standard and customized manual wheelchairs • Foldable wheelchairs • Walkers, rollators, toilet and bath aids, and other items ... 81 CONTACTS Paultech s.r.o. Paultech s.r.o., Vinařská 6, CZ 603 00 Brno GSM: +420 721 108 108 E-mail: [email protected] www.paultech.cz Supplier of medical technologies and equipment The Czech company PAULTECH s.r.o. is an authorized distributor of a wide range of medical technologies and equipment. PAULTECH s.r.o. is a company based in the Czech Republic and owned by Czech owners. The company’s focus is solely on medical supplies. Our offer includes: • Modular operating theatres • Ambulance cars • Multipurpose operating tables • All vital sign monitors (ECG, ECG holters, ultrasonic and telemetric equipment, etc.) • Operating and examination lighting devices (a new era of LED surgical lights) • Sterilization containers • Instrument sets • Pressure ulcer prevention program and special pressure ulcer prevention beds • Laparoscopic, arthroscopic and endoscopic instruments, instruments for gynaecology and urology • Titanium bone plates with fixed and variable angle screws • Consumables • Surgical gowns and patient clothing • Medical gas distribution systems • Medical carts, trolleys and furniture • Equipment for infirmaries and medical offices All products from our offer are manufactured in the Czech Republic or the European Union. Servicing and staff training for every supply are provided as a matter of course. In addition, we are making preparations for in-house manufacture of products unavailable on the market at the moment. The crucial part of our portfolio is consumable supplies where quality and price are our primary concern. On the other hand, we bring very good and quality products from many manufacturers who supply top-quality and professional products at very competitive prices. 82 CONTACTS PD clean construction, s.r.o. PD clean construction, s.r.o., U Vodojemu 1241, CZ 757 01 Valašské Meziříčí tel.: +420 775 252 158 e-mail: [email protected] www.ciste-vestavby.cz The company PD Clean Construction is specialized in implementation of clean rooms in form of complete deliveries including all components for clean rooms. These deliveries are arranged starting from the design through the delivery, installation up to putting into operation or arrangement of permanent servicing. Our company is a stable partner of building companies and for investors from the Czech Republics as well as from abroad in the area of deliveries for health-service facilities and for hospital rooms. Clean rooms are mostly built in areas as manufacture of medicines and active pharmaceutical ingredients, operating theatres and rooms for health service which have special requirements for purity of environment. We deliver a comprehensive system of components called FRESH for implementation of demanding plants and rooms; this system includes components designed specially for built-in clean rooms. They are mainly panels for partition walls and wall facing, cofferings as well as panel soffits, doors including automatic control by means of sensors, laminar fields and components for air-handling systems. Last but not least, we also deliver a wide assortment of health-service equipment. 83 CONTACTS Pharmdata s.r.o. Pharmdata s.r.o., Pelikánova 7, CZ 162 00 Praha 6 – Liboc tel.: +420 235 363 617, +420 235 363 614 e-mail: [email protected] www.pharmdata.cz The goal of the Pharmdata company is to collect, maintain and integrate information from a particular sphere of healtcare, so that it is always up to date and easily accessible for every user. The majority of processed data is designed for experts. All data is sorted by the needs of the different types of users. Some information was adapted to meet the needs of a laymen and is available to the general public. For hospitals For doctors • • • • • • • searching for all basic information about pharmaceuticals, food supplement and current medical devices • entire SPC of medical devices • comparing of current additional payments in ATC • directory of producers and suppliers nomenclature of medical devices code-book of medical devices pairing of the assortment within holding catalogues of medical devices declaration of conformity directory of producers and suppliers For public drugstores and ZP shops • code-book of pharmaceuticals, medical devices, food supplements and other medical assortment • logistic information (packaging, weight, storage temperature etc. of medical devices) • searching for assortment, detail information, SPC, declaration of conformity etc. • directory of producers and suppliers For manufactures • • • • • • registration products to code-book PDK and ZP assignation PDK and APA codes document check-up photo documentation statistics about the interest in products product diversification For online drugstores • code-book of pharmaceuticals, medical devices, food supplements and other medical assortment • immediate application of actual leaflets, display of preparations and other selected information • logistic information (packaging, weight, storage temperature etc. Medical assortment • directory of producers and suppliers For manufacturers and distributors • code-book goods • logistics information (weigh, storage temperature etc.) • address books of drugstores • statistics about the interest in products • certificates For public • fundamental information about medicine and other pharmaceutical goods • address book of pharmacies • e-pharmacy contacts 84 CONTACTS PROFIL NÁBYTEK, a.s. PROFIL NÁBYTEK, a.s., Hradská 280, CZ 396 01 Humpolec tel.: +420 565 300 111, fax: +420 565 300 112 Showroom: Vinohradská 130, 130 00 Praha, tel.: +420 777 740 479 e-mail: [email protected] www.profil-nabytek.cz PROFIL NÁBYTEK since 1992 focus on complete interior furnishing for hospitals, consulting rooms, laboratories, operating rooms, waiting rooms, nursing homes, bed sections, nurse rooms, canteens. We provide custom service - consulting, design, project and computation, own production, expedition, transport and assembly. Certificate of warranty and after warranty service are a matter of course. We successfully installed the integrated quality control systems CSN EN ISO 9001:2001 and CSN EN ISO 14001 : 1997. Our products went through an evaluation by the National Examination Institution of Light Industry s.p. in Ceské Budejovice. Decisive indicators for the approval of products were realized and on that basis we received the certificate which assures czech quality and ecologically friendly products for the customers. We have insisted on extending custom service ever since the establishment of the company. Furniture lines PROFIL, PRAKTIK, PRAKTIK 2 are designes for heakth service offering variable, comfort solutions of user demands according to function and aim of work to create friendly space for doctors, patiens, visitors, medical facilities staff as well. We furnish interiors all arend Czech republic, Slovakia and EU countries. POLYGON furniture follows individual design and trends, which we created in cooperation with DIVAN design studio. We offer komplex, reliable, experienced realizations together with atypic, challenging and individual solutions of your needs. Furniture for: • health service • nursing homes • laboratories , doctors • atypic, custom rooms Work units, tables, cabinets, file cabinets, containers, beds, chairs, desks, accessories. 85 CONTACTS ProSpon spol. s r.o. ProSpon spol. s r.o., Jiřího Voskovce 3206, CZ 272 01 Kladno tel.: +420 312 247 763, fax: +420 312 248 927 e-mail: [email protected] www.prospon.cz ProSpon is a Czech company established in 1992. We are developing, manufacturing and distributing implants and instruments for orthopaedic surgery and traumatology. Since the company was established it focused on external fixators, currently supplies also implants and instruments for ACL reconstruction, spinal fixators, oncological replacements of all big joints and succesfull shoulder replacement Sosna. Most of the distributed products are manufactured by our company, moreover we are Czech distributor of companies Orthomed (France), Implantcast (Germany), Teknimed and JEIL Medical Corporation (Korea). Our products are saled in most Czech hospitals, both public and private. We have customers also in Slovakia, Russia, Baltic countries, in Greece, Turkey and France. Company collaborates with many scientific organizations at the development (CVUT - Czech technical university Faculty of mechanical engineering, The first Medical Faculty of Charles University in Prague) Manufacturing takes place mostly in our premises, we are equipped with both mechanical and CNC turning machines and milling machines and with EDM (wire cutting) machine. Our production department manufactures aside medical devices also custom made products following customers technical drawings. External fixators: • UNI-FIX • PH-FIX • Hybrid fixator • MP-FIX • • • • • • • • • • ACL reconstruction Individual oncological implants Spinal fixators Shoulder EP Sosna Knee replacement VEKTOR Cervicocapital endoprosthesis of hip joint Wrist replacement Metatarsophalangeal joint replacement Set for knee joint fusion Set for compression arthrodesis of knee joint 86 CONTACTS PULSKLIMA spol. s r.o. PULSKLIMA spol. s r.o., Andělská cesta 609/11, CZ 460 01 Liberec 12 tel./fax: +420 485 122 159, +420 485 122 109 e-mail: [email protected] www.pulsklima.cz Dear Business Friends and Partners, let us introduce you our company PULSKLIMA Ltd. with the registered office in Liberec. The PULSKLIMA brand enjoyed good market reputation due to our special installations for the so-called CLEAN ROOMS (Note: A clean room means a room or more rooms where a certain class of air purity is required to be maintained with use of a special technology). We supplied complete installations of clean rooms and HVAC equipment to significant suppliers and investors in the pharmaceutical industry and health service. At the present time, we still specialize in the implementation of the so-called clean rooms; however, our supplies are comprehensive, covering all components for clean rooms, HVAC, air conditioning, cooling systems, and measuring and regulation systems. The supplies are provided in the whole range, i.e. from a project, supply, installation, putting into operation, and permanent servicing of the installation if required. As regards the supplies for health service faciliƟes and hospitals, our company has become a significant partner of construcƟon companies and investors both in the Czech Republic and abroad. Even in other industrial branches demanding supplies of top-quality HVAC equipment or cooling systems, the PULSKLIMA company has impressed itself on the mind of customers as a reliable partner with professional approach at implementaƟon of even most challenging construcƟons. RECONSTRUCTION - ADAPTATION - CONSTRUCTION Systems for installaƟon of CLEAN ROOMS enable variable sets of necessary technologies and equipment. The components used for installaƟons have the top quality, a reasonable price, necessary cerƟficates and a design as required. • • • • Supplies of laminar fields Supplies of air conditioning Supplies of hygienic ceilings – including recessed light fittings Adaptations of interior walls – Panelling – Fore-walls and partitions • Signalling and blocking • Initial system regulation • Qualified installation of the equipment 87 CONTACTS PURO-KLIMA, a. s. PURO-KLIMA, a. s., Štěchovická 2266/2, CZ 100 00 Praha 10 tel.: +420 261 144 111, fax: +420 261 144 160 e-mail: [email protected] www.puro-klima.cz PURO-KLIMA, a.s. is a 100% Czech engineering and supply company with own design office, specializing in services for the entire spectrum of health service facilities, ranging from teaching hospitals to the smallest medical facilities, both in the public and private sectors. PURO-KLIMA provides the following services: • Consultation with managers - selection of best-suited technologies, based on most current trends and standards, consultation with endusers of equipment • Technical support and preparation of documentation • Project documentation from preliminary study to final drawings and documentation design • Project author supervision • Complex delivery and installation of investment projects – “turn key BORCAD delivery bed AVE projects” • Delivery of medical equipment for: - Operating rooms, Intensive care, Central sterilization, Cardiological centers, Transplant centers Diagnostic centers, x-ray diagnostics - Computer tomography and magnetic resonance - Radiation equipment and equipment for nuclear medicine - Systems of emergency medicine - Transfusion sections/machines - Dialysis sections, labs - Inpatient care sections - Rehabilitation and spa technologies - Food sections, laundry solutions - Special infection sections of civil and military medicine, biological laboratories - Clinics, dental centers including labs, pharmacies - Systems for decontamination of infected waste, etc. • Deliveries of special building technologies (centralised medical gas distribution, built-in operating rooms, air conditioning, laminar air flow supply) • Technical control of building readiness • Professional training of medical staff • Warranty and post warranty service PURO-KLIMA, a.s. supports a wide spectrum of healthcare facilities not only in the Czech republic. PURO-KLIMA, a.s. is presented in Slovakia by the organization unit – PURO-KLIMA, a.s. (in Piešťany) and by the form of representative office in Vietnam – VPDD PURO-KLIMA, a.s. in Ho-Chi-Minh City. In the field of foreign trade cooperates with its sister company PURO-KLIMA EXPORT a.s. PURO-KLIMA, a.s. also offers its services through the companies TOO PURO-KLIMA (Almaty, Kazakhstan) and PURO-KLIMA, S.A.R.L. (Libreville, Gabon), which like the subsidiary companies operate in the presented territories. 88 CONTACTS RADIX CZ, s.r.o. RADIX CZ, s.r.o., Čáslavská 231, CZ 284 01 Kutná Hora - Karlov tel.: +420 327 315 980, fax: +420 327 315 981 e-mail: [email protected] www.radixcz.cz RADIX as a trading company focusing on deliveries of sanitary technology, material and implants as well as on comprehensive furnishing of sanitary facilities (from ambulances to hospital facilities) was established in the year 1991. We collaborate solely with renowned world producers of sanitary technology. In the year 2003 the company’s marketing strategy expanded to the Czech market where the daughter firm, RADIX CZ, is active. It supplies sanitary technology to the extent corresponding with the parent company’s product portfolio. The business strategy of the company is based on high demands in the area of quality of offered products and services as well as on maximum satisfaction of customers. Among the most crucial qualitative criteria is quality management system and STN EN ISO 9001 : 2001 Certificate which RADIX obtained in the year 2004. Professional approach of in-house employees contributes to achievement of high degree of satisfaction of our customers. Manufacturers represented in the Czech Republic by RADIX CZ KARL STORZ MERIVAARA TRILUX DE SOUTTER MEDICAL ECLERIS MEDIVATORS CONDOR SPIEGGLE & THEIS INSAUSTI AIRINSPACE Endoscopy for ENT, Orthopedics, Neurosurgery, ARO and Emergency medicine, Oral and Maxillofacial Surgery and Gastroenterology Operating tables Surgical and Examination lights Drilling and Sawing systems ENT microscopes, colposcopes Washing and disinfecting machines for flexible endoscopes, drying cabinets Retractors for all surgical disciplines Narrow specialization in ENT (TORP, PORP, ventilation tubes, etc.) Hospital Furniture Decontamination air Customer service • formation of implants consignment warehouses • possibility to test sanitary technology before purchase • flexible servicing and (subsequent) after-sales customer care • possibility to borrow substitute technology during the time of repair • organization of trainings for customers • the bestselling products are immediately delivered from a warehouse 89 CONTACTS ROYAX, s.r.o. ROYAX, s.r.o., Hlavní 827, CZ 250 64 Hovorčovice tel.: +420 321 123 111, fax: +420 321 123 112 e-mail: [email protected] www.royax.eu ROYAX is a well-established company engaged in manufacturing medical equipment, especially emergency medical equipment in EMS. The company has entered market with the aim to address professional public through high quality products, using new materials, manufacturing technologies, services, and customeroriented approach. Company ROYAX produces the following products: Medical Kits ROYAX medical cases and kits have been designed and produced with the purpose of providing quality and durability. The most important comfort criterion of these products is to offer quick access to all chambers, sections, and medical instruments. Hard cased kits, which have the ability to resist shocks and effects of water, dust, oil, etc., provide remarkable safety for all medical instruments inside. Therefore, they can be used in uncommon and challenging rescue situations. The major design and production criterion for soft cases was “ergonomics”. Three different handlings, such as handy, shoulder, and back bag, are possible. Immobilizers Utilizing polyurethane and PVC coated material along with high frequency welding are main improving factors in maintaining lightweight, easy to use, quick fasten, and easy to wash features for all ROYAX splints and immobilizers. Stretchers We use lightweight and high-strength material and intelligent design for safe mobility and transportation. In order to present high technologies, materials, and intelligent design ROYAX cooperates with leading research and development institutions located in the European Union. The company is certified by the norms EN ISO 9001:2008, EN ISO 13485:2003 + AC: 2009, and EC Certificate and is a member of Association of Manufacturers and Suppliers of Medical Devices. Moreover, all the products conform to the European Standards EN 1789 and EN 1865. ROYAX is an independent, privately owned company, with an internal mission to work in close co-operation with customers and official distributors worldwide. 90 CONTACTS SIAD Czech spol. s r.o. SIAD Czech spol. s r.o., Braňany u Mostu, c.p. 193, CZ 435 22 Braňany u Mostu tel.: +420 476 765 000, fax: +420 476 129 286 e-mail: [email protected] www.siad.cz The company SIAD Czech spol. s r.o. is a branch of Italian firm SIAD S.p.A. which was established in 1927 in Italy by the Sestini’s family. In the late eighties of the last century SIAD entered into an agreement with PRAXAIR one of the leading American manufacturers and suppliers of medical, industrial and technical gases. In the Czech Republic SIAD has been operating since 1993 starting with the sales and distribution in the medical gases in 2001 and expanding its activity in the medical devices and instruments business in 2008. • • • • • • • • • • • Medical gases and respiratory mixtures Gases for anesthesia Gases for sterilization and laboratories Gases for laparoscopy, cryosurgery Cryogenic dewar vessels Cryopreservation containers Bags for preservation of blood cells Devices and equipment for laparoscopy Devices for sleep diagnostic Devices for ventilation treatment Hardware system for audio*visual stimulation in fMRI • Custom made cranial prosthesis 91 CONTACTS Sicar spol. s r.o. Sicar spol. s r.o., Masojedy 59, CZ 282 01 Český Brod tel.: +420 321 613 200, fax: +420 321 613 209 e-mail: [email protected] www.sicar.cz Our company Sicar spol. Ltd was estabilish in December 28th 1993 in Sibřina village situated on the east fringe of Prague. From the start production , the company is manufacturer of sanitary vehicles mainly . Since 2005, the company has its own production facilities with a capacity of approximately 500 ambulances a year. The new facility allows to produce other types of special vehicles in a different model variants. Now the company operates about 40 employees. In year 2007 we produced 270 ambulances. Today the company delivers ambulances to other countries such as Germany, Austria, Switzerland, Slovakia, Syria, Russia, Belgium, Scandinavia, Romania, Holland, etc. Therefore come into being an export department, which is in charge of their own exports, but also guide our branches in the world. They are Sicar - M in Moscow, Sicar Slovakia, Sicar Nordic. In year 2003 we received certification according to standards ISO 9001:2001, which we introduced in the renowned French company BVQI. In 2005, we introduced the assembly of the interior of ambulances in the standard EN 1789. We are currently working on other qualitative standards such as the environment, etc. With coming of new types of vehicles such as VW, MB, Renault, Ford, technically we modernize our buildings – interior - so that their technical levels reach those vehicles and modern trends. With the entry into the European Union, we opened up new opportunities in the European free market. This is a big appeal for further development of our company and our products. We are pleased to invite you cordially, our honored customers, to visit us. 92 CONTACTS SIVAK medical technology s.r.o. SIVAK medical technology s.r.o. Jana Masaryka 1713, CZ 500 12 Hradec Králové tel.: +420 495 220 684, fax: +420 495 221 327 e-mail: [email protected] www.sivak.cz Since its establishment in 1990, the SIVAK Company has dealt with services for people with physical disabilities. At the beginning, the company provided mainly maintenance services, later it enlarged its activities with commercial and consulting services. Since 1995, the SIVAK Company has been the exclusive representative for US Company INVACARE, an umbrella organization for well-know European and worlds brands, of the Czech Republic. The INVACARE products became highly popular on the Czech market of which they became an inherent part. At present, SIVAK belongs to the largest suppliers of the health care equipment and operates and further broadens its own its own network of service centers allover the republic. SIVAK supplies a rich assortment of products, especially electrical and mechanical wheelchairs for indoor and outdoor use, lifting devices, beds with adjustable positioning, oxygen concentrators, toilet chairs and wheelchairs, aids and hygiene products for home and institutional care. Most products are paid by insurance companies of which SIVAK is an important partner. The main feature of the INVACARE products is not only their premium quality and new production technology, but also modern design, easy operation, a wide range of accessories, long warranty periods, and affordable prices. The SIVAK Company is also a partner of other major European producers in the Czech Republic in particular: AKS, HANDICARE, HANSE, VITAACTIVA, REHASTAGE. The SIVAK Company became a regular participant in all significant exhibitions and fairs held in the Czech Republic and its products are always in the center of visitors´ attention and receive many awards, to name at some: SIVAK received seven Golden Rehaprotex awards that are given at the REHAPROTEX international fair in Brno. The company publishes its own information newspaper, goes to see its clients in their homes, cooperates with associations for the disabled as well as with professionals from amongst the disabled and with their various organizations, which enables SIVAK to better orientate in their needs. It is a common place for SIVAK that delivers and services its aids as well as that it provides high-quality consulting. • • • • Commercial and service activities Consulting Organization of and participation in exhibitions Delivers and maintenance service of products: active mechanical wheelchairs, sport wheelchairs, special wheelchairs and position adjustable beds; home care aids, baths, lifters and hygiene products. 93 CONTACTS Speciální Medicínská Technologie, s.r.o. Speciální Medicínská Technologie, s.r.o., Papírenská 114/5, CZ 160 00 Praha 6 tel.: +420 233 320 201, +420 224 316 720, fax: +420 224 318 011 e-mail: [email protected] www.smt-praha.com Special Medical Technology Co. Ltd. is an all-Czech design and manufacturing company, which is founded mainly on the expert knowledge and experience that the company promoters have gained during the past two decades. The company is owned by seven shareholders. There are four main employees in the commercial department and twenty-five contractual salesmen for the domestic market and eight others for the foreign market. The principle decisions are made at the company’s general meeting. The company director manages the company’s current operational direction, either directly or through the heads of the company’s individual departments. The company’s orientation and main operational areas include the development, design, manufacture, sales and service of the ELECTROSURGICAL and CRYOSURGICAL systems, instruments, tools and accessories for various human medical specialisations, including special equipment for dentistry as well as a parallel line of equipment for veterinary surgery. The company has been granted international certificates that confirm that its manufactured products are conformable with the standards currently in effect in the European Union and the Czech Republic (ISO 9001, ISO 13 485, the European Council Guidelines 93/42 EEC, EN 60601-1, EN 60601-1-2, EN 60601-2-2) as well as certificates in accordance with the Collection of Ordinances of the Government of the Czech Republic ČR NV 336/2004 Coll. and other Czech internal standards and operative regulations. The certification body for the Czech Republic and the EU is now the EZÚ Prague-NB 1014, (previously the G-MED-NB 0459 located in Paris, France). The company products hold the CE Mark of conformity CE 1014 (previously the CE 0459). All the company’s products are delivered with a valid Declaration of Conformity. Special Medical Technology, Ltd. is the only manufacturer of instruments for ELECTROSURGERY and CRYOSURGERY in the Czech Republic. Its professional products are noted not only for their high quality, multi-purpose utility and safety but for their favorable price and accessible service as well. The company’s credomission is to equip physicians with modern, high quality instruments that have a high utility value and reliable service and all for a reasonable and accessible price. HIGH TECH but not HIGH PRICE! The company thus works together with Czech as well as foreign physicians on the development of instruments for the fields of CRYOSURGERY and ELECTROSURGERY. • Electrosurgery and Cryosurgery Equipments Manufacturer 94 CONTACTS S&T Plus s.r.o S&T Plus s.r.o, Novodvorská 994, CZ 142 21 Praha 4 tel.: +420 239 047 500, fax: +420 239 047 549 e-mail: [email protected] www.sntplus.cz Since 1999 the company S&T Plus has been a reliable and respected supplier of medical devices for a wide range of customers. The initial assortments of the company at the outset of its existence were the products of the Hewlett-Packard medical division. These products especially covered ultrasound systems and patient monitors. Due to organizational changes the Hewlett-Packard product portfolio moved under the wings of the PHILIPS concern, who remain one of the key partners for S&T Plus even today. S&T Plus currently offers complex customer solutions in the field of cardiology instruments, ultrasound imaging systems and patient monitoring. AirLiquide French pulmonary ventilation systems are also an important part of the product offer. Cooperation with the Norwegian company Laerdal, one of the global leaders in the manufacture of patient stimulators, manikins and aids for medical emergency and rescue service/urgent care, was started in 2008. S&T Plus is especially aimed at an individual approach to its clients and their long-term satisfaction with the provided services – starting from the project preparation, through business realization until the after-sale services. 95 CONTACTS STROJÍRENSKÝ ZKUŠEBNÍ ÚSTAV, s.p. STROJÍRENSKÝ ZKUŠEBNÍ ÚSTAV, s.p. (Engineering Test Institute) headquarters Brno, Hudcova 424/56b, CZ 621 00 Brno tel.: +420 541 120 111, fax: +420 541 211 225 e-mail: [email protected] www.szutest.cz The Engineering Test Institute, acting as Accredited testing laboratory and Certification body for certification of products, management systems and persons. IN THE FIELD OF MEDICAL DEVICES: • Health care beds, manual/electric wheelchairs, stretchers, hoists • Walking aids • Electric/non-electric operating tables • Dental units • Mechanical/electric anesthetic equipment, anesthetic gas monitors • Lung ventilators • Incubators, radiant heaters • Diagnostic and monitoring devices – electrocardiographs, electromyographs, … • Electrosurgical instruments, power units for instruments • Equipment for extracorporeal circulation, suction devices, pumps and dispensers • Washing and disinfecting equipment, sterilizers, centrifuges, water distillers • Devices for ultrasonic imaging, X-ray, lasers and other equipment PROFESSIONAL COMPETENCE (EC DIRECTIVE – GR): • 2006/95/EC,(17/2003 Coll.) Low-voltage equipment • 2006/42/EC,(176/2008 Coll.) Machinery • 2004/108/EC,(616/2006 Coll.) EMC ACTIVITIES: • Assessment of product conformity pursuant to Act No. 22/1997 Coll., as amended • Product certification • Product testing • Certification of quality management systems according to ISO 9001, EN ISO 13485 • Special equipment manufacturing • Training and seminars • Information services • Consultancy services 96 CONTACTS Synthesia, a.s., SBU Nitrocellulose, BU Oxycellulose Synthesia, a.s., SBU Nitrocellulose, BU Oxycellulose, Semtín 103, CZ 530 02 Pardubice tel.: +420 466 824 503, +420 466 824 502, fax: +420 466 822 958 e-mail: [email protected] www.okcel.eu, www.synthesia.eu Synthesia, a.s. is the major European producer of qualified chemistry. With 1630 employees, turnover around 130 million € and more than 90 years long tradition, we produce hundreds of products for customers in 60 countries all over the world. 100% shares are owned by Agrofert, a.s. SYNTHESIA is divided in these Strategic Business Units: • • • • • SBU Pigments and Dyes SBU Nitrocellulose SBU Organic Chemistry SBU Energetics VUOS (Research Institute for Organic Syntheses) BU Oxycellulose is a part of SBU Nitrocellulose, which can boast more than 20 years of experience in dealing with oxidized cellulose and production of semi-products intending for further finalization of medical devices (powder form oxycellulose), but also with the production of final medical devices (flat forms). This product line is called OKCEL® and the whole portfolio of these products is classified as class III medical devices. OKCEL® range products were CE certified in 2010. All of the products are produced according to ISO 13485:2003. OKCEL® is used directly by surgeons during various invasive procedures for the control of hemostasis of capillary, venous and arterial small diffuse bleeding. After application of OKCEL®, it can be retained in the body because this product line is fully biocompatible and after 21 days is fully absorbed, without any residues. As the raw material used for manufacturing OKCEL® is natural, vegetable origin, it does not cause allergic reactions. Due to the low pH, OKCEL® has the antimicrobial effects which promote the healing of operational and other injury of internal organs. Our portfolio contains also Chitosan acetate, which is semi-finished product of an animal origin. Chitosan acetate is mainly used for acute bleeding in the non-sterile environment (car crash, natural disasters or military conflicts). Products are available in the forms as follows: Textile form • OKCEL H-T (original textile form of oxidized cellulose) • OKCEL H-D (heavy duty textile form of oxidized cellulose with higher absorbency) • OKCEL F (flexible, layered cotton wool form) Linter/powder form • OKCEL H-L • MDOC (exclusive production) • OKCEL Ca-L (calcium salt of oxidized cellulose) • Chitosan Acetate 97 CONTACTS Trystom, spol. s r.o. Trystom, spol. s r.o. , Pasteurova 15, CZ 772 00 Olomouc tel.: +420 585 225 262, fax: +420 585 225 262 e-mail: [email protected] www.trystom.cz The Laboratory and Medical Equipment Division of the company TRYSTOM spol. s r.o., was established in 1993 by privatization of Development Laboratories and Workshops of the Palacky University in Olomouc with the intention of developing and manufacturing equipment for dental laboratories. The ensuing success in this field meant that the division, and subsequently also the production programme, gradually expanded. Currently, the division’s main spheres of activities include development and production in the following fields: • instrumentation equipment for dental laboratories • components and equipment for urological and ultrasound devices • armamentarium for anthropometric measuring devices • custom development and production of laboratory and medical equipment TRYSTOM, through its structure and personnel setup, primarily focuses on the development of instrumentation and equipment with subsequent small-batch production. It has its own production and technical background, which, together with a team of qualified and experienced technicians, enables it to fully comply with the demanding requirements for production of today’s laboratory and medical equipment. TRYSTOM has been the holder of the ISO 9001/2000 (or more precisely 9001/2008) quality management system certificate for “Development, production, sale and service of instrumentation and medical devices” since 1999, the validity of which is successfully renewed every year through recertification audits. TRYSTOM aims for total satisfaction of its customers and for supporting their technological development. We strive to achieve this goal through the professionalism expended by our employees and by virtue of innovative approaches to addressing new development challenges. This layout of our customers’ portfolio and competitive range of products enable our active development and continuation of the tradition. 98 CONTACTS TSE spol. s r.o. TSE spol. s r.o., Mánesova 390/74, CZ 371 52 České Budějovice tel.: +420 386 721 149 (107), fax: +420 386 721 102 e-mail: [email protected] www.tse.cz TSE spol. s r.o. has been engaged in the development, design, manufacture, installation and service of medical equipment for neonatology since 1992. More than 50-year tradition in electronic manufacturing, custom development and production, qualified stuff system ensure high quality of our products, which are exported to countries all across the world through our distribution channels. TSE spol. s r.o. specializes in the production of neonatal equipment such as the stacionary incubators, the transport incubators and the phototherapy lamps. The latest line of stationary infant incubators is designed for intensive care, providing the patient and staff comfort required for modern medical products. The incubators may also be supplemented with a phototherapeutic lamp, designed for the treatment of neonatal jaundice. TSE spol. s r.o. focuses on high added value products, supporting its customers with the full range of services from installation to professional training and warranty & after-warranty service. The company has implemented a quality management system according to ISO 9001, ISO 13485, ISO 14001 in accordance with Directive 93/42/ EEC and its products meet all the relevant requirements. TSE spol. s r.o. also distributes and supplies a wide range of products and accessories for neonatology from domestic and foreign manufacturers and partners. • • • • • • Patient monitors and ECG Infant cribs Lung ventilators Respiration monitors Suction units Resuscitation units 99 CONTACTS Textilní zkušební ústav, s. p. Textilní zkušební ústav, s. p. , Václavská 6, CZ 658 41 Brno tel.: +420 543 426 711, fax: +420 543 426 742 e-mail: [email protected] www.tzu.cz The Textile Testing Institute with the seat in Brno is an organisation, which directly follows up the tradition of textile testing in the Czech Republic. It has been providing services in this line of business for more than three decades and is one of the key institutions focusing on testing and certification of textile products in the CZ. This is corroborated by the fact that the TTI laboratory was the first body to be accredited to carry out tests in the CZ in compliance with European standards as early as 1991. Testing The Accredited Testing Laboratory performs over 300 accredited tests and uses hundreds of methods in compliance with national and international standards. The laboratory is ready to test any type of fabric in any form. We test materials, finished technical fabrics, such as geotextiles, floor coverings and many other products. Product Certification May be voluntary, guaranteeing the product quality, or compulsory in accordance with statutory provisions, where safety of products is assessed. As the Notified Body No. 219 and Notified Body No. 1021 TTI may assess compliance of the products in question with the European directives from the point of view of meeting safety requirements. For some of these products, inspection of the quality production management is required and it can be arranged through the certification of the production management system. System Certification Is accredited for awarding certificates in compliance with the requirements of ISO 9001:2001 for quality management system, system of environmental management pursuant to ISO 14001, and furthermore ISO 13485 for medical equipment. The certificates are internationally recognised, because they are awarded within the IQNet international network. Moreover, TTI provides certificates in the areas of standards for ensuring occupational health and safety under the title of OHSAS 18001 and the system of critical points of the food industry - HACCP and industrial laundries - RABC. The Textile Testing Institute carries out its activities according to the latest methods trying to keep up with world trends in testing, metrology, standardization and certification as much as possible. We are aware of the fact that our future is closely connected with cooperation on a European level, and therefore we keep in touch with the other professional institutes involved in certification, testing and research, of our closest neighbours - Austria, Germany, Poland, Slovakia and obviously also Hungary. Thanks to the knowledge and expertise of our workers we continuously maintain a high professional level of the services provided. We will be only too happy to satisfy your requirements and wishes. We will assess your quality ... 100 CONTACTS UJP PRAHA a.s. UJP PRAHA a.s., Nad Kamínkou 1345, CZ 156 10 Praha-Zbraslav tel.: +420 227 180 304, fax: +420 227 180 390 e-mail: [email protected] www.ujp.cz Company is manufacturer and supplier of medical equipment and system for radiotherapy. We provide a wide range of services related to our equipment for to have our customer fully satisfied with our device, warranty and after-warranty service and personal training including. Equipment is operated in many countries, e.g. Slovakia, former SU, Indonesia, Mongolia and others. RADIOTHERAPY EQUIPMENT AND SYSTEMS Radiotherapy X-ray simulator TERASIX Unique concept of X-ray simulator for radiotherapy for the planning of the radiotherapy treatment of the patient virtually complemented with all the information for application of the treatment. • Simulation of all types of teletherapeutic irradiators • Simulation of multi-leaf collimator (MLC) at arbitrary position • Possibility of modification proposal for individual fields shaping devices • Digitalization of the X-ray image in real time Radiotherapy cobalt unit TERABALT Modern equipment guarantees a high quality irradiation of oncological patients with the application of the most modern digital technologies of control systems • TYPE 80/100 (SAD 80/100), symmetric (model SCS) and asymmetric (model ACS) collimation system • Accurate radiation dose transfer in the space • Application of the most modern radiotherapy trends • On-line diagnostics at the operating unit conditions Radiotherapy planning system PlanW The planning system for external radiotherapy • Support of the saving of the patients data • Fully 3D mode in the calculations and views • Support of interconnections of radiotherapy equipment and system via the data format DICOM RT Record and Verify system TERAGIS TERAGIS is the database system allows to acquire, store and use the patient´s treatment data. • Verification of the treatment parameters • Own treatment calendar for working day planning and patients • System is fully integrated part of RCU TERABALT and TERASIX simulator 101 CONTACTS VIACELL s.r.o. VIACELL s.r.o., Klíšská 1346/14, CZ 400 01 Ústí nad Labem tel.: +420 475 621 361 nebo +420 475 621 502, fax: +420 475 621 304 e-mail: [email protected] CONTACTS www.viacell.cz Viacell Ltd. is a genuinely Czech company which was established in 2003. Its primary focus are the medical devices which assist healing of wounds on the basis of hydrogel. The hydrogel sheets are devised to help as a first aid in case of burns. Furthermore, they support the healing both of chronic and of acute wounds. In addition to the hydrogel sheets, we have a great variety of products including special adhesive plasters for healing minor wounds (i. e. hydrogel plasters to prevent and dress blisters), as well as adhesive plasters for diabetics and the most common ones. In the range of common plasters, there are to be found blue detectable plasters for food industry; children’s picture plasters; and adhesive strips of various shapes, sizes and appearance. for burns for scratches We cooperate with doctors and by doing so, we gain practical experience which helps us and our clients to make better use of the modern devices for wound-healing on the basis of wet therapy. The packaging and the instructions of these modern devices are suitable both for the general public as well as for clinical facilities. Thanks to the cooperation with other Czech producers, we are competent to provide the clinical facilities with a complete supply of adhesive plasters and medical dressings, including the modern devices for wound-healing on the basis of wet therapy. for healing for diabetics for blisters against wrinkles 102 VITAPUR VITAPUR, Vlasta Veselíková, Nová 856, CZ 570 01 Litomyšl tel.: +420 461 612 579 e-mail: [email protected] www.vitapur.cz Let us introduce our company to you. It was established in 1991. Under the brand of VITAPUR we are developing, producing and selling products for professional and home care: antidecubitus mattress, hygienic bedding (bed sheets, mattress pads, bed pads, etc.), positioning and stabilizing means, antidecubitus means, anatomic pillows and other products. Our aim is to provide users with fully-fledged functional products, solutions with no compromise which are 100% reliable. Therefore we are developing our own constructions and designs and we use and combine special functional breathable but impermeable materials with modern technologies of connecting them. The company uses quality management systems in accordance with ČSN EN ISO 9001:2009 and ČSN EN ISO 13485:2003 for the following spheres of activities: development, production and sale of health care equipment and equipment for home care, social welfare facilities and hospitals. RANGE OF PRODUCTS • antidecubitus mattress • hygienic bedding • positioning means • stabilizing means • antidecubitus means • anatomic pillows 103 CONTACTS Zdeněk Holomý Electronics Zdeněk Holomý Electronics, Hemy 829, CZ 757 01 Valašské Meziříčí tel.: +420 571 685 970 (971), fax: +420 571 685 979, GSM: +420 603 102 858 e-mail: [email protected] www.holomy.cz Warning equipment for priority vehicles, nurse-calling systems Company Zdeněk Holomý Electronics is the most significant Czech producer of warning equipment for emergency and special vehicles and language laboratories. Signalling nurse-call systems intended for hospitals and nursing homes are also part of the production. Own development and production base, more over 70 years tradition of electronic production, qualified team and modern management style are guarantee of high-quality and competitive products and services which are exported to customers world-wide – Slovakia, United Kingdom, Switzerland, Greece, Holland, Germany, France, Austria, Russia etc. All products comply with requirements of European regulations and norms. Quality Management System is certified according to EN ISO 9001:2008 and EN ISO 13485:2012, Certificate No.: CQS 2129/2013 and CQS 102/2013. • Warning equipment for emergency vehicles (lightbars, beacons, electronic sirens, warning lights, LED displays, work lights …) • Signalling nurse-call systems for hospitals, intensive care units and nursing homes with wireless pager option • Systems for real-time screen transfer and PC control • Equipment for language training classrooms 104 CONTACTS ZES Brno, a.s. ZES Brno, a.s., Sladovnická 4, CZ 620 00 Brno tel.: +420 602 709 671 e-mail: [email protected] www.pulse-magnetotherapy.com Zes Brno has been involved in the development, production and repair service of the magnetotherapeutical medical devices for the home care, as well as professional use in spas, health resorts, hospitals and other medical organizations. The joint stock company ZES Brno has been established on the 1st Jan 1994. Its activities (beside medical instruments including also polygraphy, publishing, logistics) are carried out in its own 14 000 sq. meter premises. Since 1997 the company has been developing regnerative and medical magnetotherapeutic devices with the trade mark Renaissance. The temporary face and quality of the devices are the result of the work of the last seventeen years. The product, which meets the highest customer requirements on the quality and safety, is the result. The product parameters are regularly controlled on the base of high quality standards (EAN ISO 12485:2003). Renaissance® products meet all requirements on the EC certifications (norms 93/42/ EHS). Magnetotherapeutic devices Renaissance support cell regeneration, intensify and several times accelerate the exchange of substances in the cells, promote blood ciculation in a perfect way at the respective tissue and blood systém, have possitive effect on inflamatory processes, brings analgetic effects and improve immunity. Because of these effects magnetotherapy brings a lot of applications in the healing of many health problems, either as a main curative means or as the supportive one, which accelerates common medical treatment. Nowadays, lowfrequency pulsing magnetotherapy is successfully applied in the fields such as internal medicine, orthopedics, sport medicine, balneology, rehabilitation, pediatrics, geriatrics, dermatology, neurology, dentistry, urology, and also in veterinary medicine. By the distribition network ZES Brno successfully expands the market share (besides the Czech rep also within other Europaean countries – Slovakia, Poland, Spain, France and others). ZES Brno has a long experience in the field of magnetotherapy instrument production, carefully pays attention to the highest quality processing, warrants healing effects and clinical results, minimal failure rate and invests a relevant funds to the development and inovation of the magnetotherapeutic devices based on the highly-effective electrical low-frequency pulsing magnetic field. 105 CONTACTS ZPT Vigantice spol. s r.o. ZPT Vigantice spol. s r.o., Vigantice 266, CZ 75661 Rožnov pod Radhoštěm tel.: +420 571 757 330 (346), fax: +420 571 757 349 e-mail: [email protected] www.zptvigantice.cz ZPT Vigantice spol. s r.o. was established in 1993. The main production programme - product line MediCall – nursepatient communication and signalling systems for healthcare institutions. The main priorities of the company are product quality, reliability, individual approach, and professionalism. Systems work in hundreds of hospitals in the Czech Republic, in Slovakia, Russia, Kazakhstan, Georgia, Belorussia. Products Nurse call system (communication) MDC V02, MDC V03 IP Nurse call system (signalization) MDC SV05, MDC C03 Calling system MDC AV03 References Praha UVN, Praha IKEM, Praha VFN, Bratislava UN, Košice UN, Plzeň FN, Brno FN, Ostrava FN, Brno UN. Voronezh - Dorozhnaya klinicheskaya bol’nica, Moskva Nauchnyi centr imeni Kulakova, Perm’ - FCSSH, Astrahan’ - Travmatologicheskii centr “LOKOHELP”, Vladivostok - Centr DVFU, Aktobe - Medicinskii centr Daru, Petropavlovsk – Kardiocentr, Tbilisi - Central’naya respublikanskaya bol’nica, Poti - Mnogoprofil’naya klinika. 106 CONTACTS www.medtechnik.cz AVDZP_catalogue_EN_04/2014 Organisation: ASSOCIATION OF MANUFACTURERS AND SUPPLIERS OF MEDICAL DEVICES Vinařská 6 603 00 Brno CZECH REPUBLIC tel./fax: +420 543 243 032 e-mail: [email protected]