Chapter 14 - Hardtail Chopper

Transcription

Chapter 14
Roland Sands Design
ribbed handlebars are an
original take on two
timeless designs
Chapter 14 is all about handlebars and everything
that’s bolted to the handlebars such as grips, levers,
control cables, risers, handlebar clamps and much
more. No matter if you are looking for a stock
replacement or custom handlebar, in diameters from
1”, 1 1/4” or even Mucho-Fatzo 1 1/2” thick, you will
find them in this section. This section also shows
various types of handlebar controls. Stock replacement
controls, custom style controls as well as billet
aluminum controls from Zodiac, Performance Machine,
Kustom Tech and Arlen Ness. Many new products are
introduced in this catalog such as new handlebars from
Zodiac, Biltwell, Roland Sands Design,Arlen Ness and
Fehling, grips from Arlen Ness, Kustom Tech and Cycle
Kraft, loads of different riser designs and Barnett
“Stealth” clutch, throttle and idle cables, which feature
black casings, as well as all-black cable adjusters
instead of the regular chrome hardware.
Biltwell “Dog Bone” style Stainless Steel riser top
clamps come in polished and black
New handlebars
from Biltwell come
in chrome and black in
many, many different styles
Cycle Kraft’s “Neo
Fusion” grips by Kan’s
Factory of Japan
feature outstanding
designs and come in black,
polished aluminum or satin
finish bronze
Handlebars
PAUL YAFFE'S BAGGER NATION MONKEY BAGGER
BARS
These bars are bitchin'!! When Paul Yaffe took to tricking out his Street
Glide he wanted to combine chopper styling and attitude with a unique
handlebar that Bagger Nation could truly call it's own! Talk about
nailing it! These handcrafted bars fit all touring models with bat wing
fairing such as Street Glides and all the Electra Glides. Nothing will add
more attitude to your Bagger than a set of Monkey Bagger Bars! They
sit 12" (30 cm) tall with a 36" (91 cm) spread.They are chrome plated,
pre-drilled for internal wires and are 1.25" in diameter. The coolest
part is they fit all applications including 2008 to present fly-by-wire
models!
745034 Monkey Bagger Bars for 1986 to present FLHT and FLHX
models
Z-BARS
There is no handlebar with the looks of a Zodiac Z-bar. Zodiac's Z-bars
are available in normal 1" (2.54 cm) diameter as well as in the "Fat
Bubba" 1 1/4" (3 cm) diameter.The Fat Bubba version has 1" diameter
ends to allow the installation of regular handlebar controls and is
dimpled to route the switch wire looms. As with all our Fat Bubba
handlebars, the fat section has a flatted spot for your brake master
cylinder. The 1" diameter Z-bar comes undimpled.
096114 Z-bar, without dimples, 25 1/2" (65 cm) wide, 2 3/4"
(7 cm) rise and 3" (8 cm) pull-back
096113 Fat-Bubba Z-bar, with dimples, 1 1/4" (3 cm), thick, 29"
(74 cm) wide, 3" (8 cm) rise and 3" (8 cm) pull-back
Handlebars, Risers, Grips, Controls & Cables
14
14-002
PAUL YAFFE'S BAGGER NATION MONKEY BAGGER
BARS
If you're a Road King freak don't feel left out! Paul Yaffe makes killer
bars for your model too! Paul wanted to lend all the chopper styling
and attitude he could to the Road King platform so he took a set of his
classic Monkey Bars, widened them a couple of inches, fit to a Road King
and WHAM... instant attitude adjustment! These bars completely
change the look and ride of any Road King and also fit all other 1986 to
present Harley Models. They measure 9" (23cm) tall and have a 32"
(81 cm) spread. They are chrome plated, pre-drilled for internal wires
and are 1.25" in diameter. They are killer for Road Glides too and the
coolest part is they fit for all applications including 2008 fly-by-wire
models!
745036 OEM Monkey Bars for 1986 to present FLHR and FLTR
models
NESS 1 1/4" LOWRIDER BARS
• These are the same bars Arlen made back in 70's
• Brought back by demand in 1 1/4" tubing
• Looks and feels great!
• Installation requires ZPN A01471 riser bolt kit
• Sizes in width, rise and Pullback
A08022 Lowrider Bars with indents 29 1/2" (75 cm) x 12"
(30.5 cm) x 12 1/4" (31 cm)
Handlebars
NESS 1 1/4" RAM BARS
NESS 1" & 1 1/4" V-DRAG BARS
• These are a re-make of the first product ever made by Arlen in 1970
• Smooth curvaceous bends featuring 1 1/4" tubing
• Another new design from Arlen Ness featuring unique V-Styling
• Now available in 1" and our new 1 1/4" diameter for that stylish
A08033
A08032
Width
30 1/4"
30 1/4"
Rise
12 1/2"
10 3/4"
Pull Back
10 1/4"
11 1/2"
NESS 1" & 1 1/4" LATE STYLE TALL FATBOB DRAG
BARS
• These are the famous "Ness-Drag bars"
• Now available in 1" and our new 1 1/4" diameter for that stylish
"Fat-Look"
• Bars are 5" center-to-center width
• 1" diameter bars feature 8 1/2" (21.5 cm) rise, 11" (28 cm) pullback
and 25 1/2" (65 cm) width at bar ends
• 1 1/4" Diameter bars feature a rise of 9 1/2" (24 cm), a 10" (25 cm)
pullback and a 27 1/2" (70 cm) width from tip to tip
A08006 1" Fatbob Drag Bars with indents
A08009 1" Fatbob Drag Bars with indents and internal wiring
holes
A08011 1 1/4" Fatbob Drag Bars with internal wiring guide-holes
"Fat-Look"
• Work great on FXST, FXR and Dyna Glide Models
• Measure 7 1/4" (19 cm) tall
A08034 1 1/4" V-Drag Bars with internal wiring guide holes
A08031 1" V-Drag Bars without indents
NESS 1 1/4" FLYBARS
• Curvaceous styling
• Looks great on any application
• Indented models feature internal wiring holes and guides
• Available in two heights
A08021
A08020
Width
30 1/2"
30 1/2"
Rise
9 1/2"
7 1/2"
Pull Back
8 1/2"
8"
14
• Excellent comfort
14-003
Handlebars
NESS MODULAR HANDLEBARS
These Patent Pending design handlebars combine function and adjustability.They feature 1 1/4" (32 mm) steel tubing with billet aluminum junction
clamps that rotate towards or away from the rider for their desired comfort needs. All bars are drilled and slotted for internal wiring and can be
used for cable as well as Fly-By-Wire applications. Drag bars bolt on directly to 3 1/2" center to center handlebar mounts on all Softail, Dyna and
Sportster models. Bagger Apes and Mini Apes have the 3 1/2" center to center knurling to fit most Harley models. Available in chrome and black.
14
14-004
Modular Bagger Apes for FLHT and FLHX
Chrome
Black
Center Width
A08970
A08960
15" (38 cm)
Width
36" (91 cm)
Rise
13" (33 cm)
Pullback
8" (20 cm)
12" Modular Drag Bars
Chrome
Black
A08976
A08966
Center Width
3 1/2" (9 cm)
Width
26" (66 cm)
Rise
12" (30 cm)
Pullback
8" (20 cm)
10" Modular Mini Apes
Chrome
Black
A08972
A08962
Center Width
10" (25 cm)
Width
35" (89 cm)
Rise
10" (25 cm)
Pullback
5" (13 cm)
8" Modular Drag Bars
Chrome
Black
A08975
A08965
Center Width
3 1/2" (9 cm)
Width
25" (64 cm)
Rise
8" (20 cm)
Pullback
8" (20 cm)
NESS HANDLEBARS
• Constructed from either 1" or 1 1/4" DOM steel tubing
• 1 1/4" diameter bars feature 1" grip ends allowing clearance for stock and aftermarket controls designed for 1" handlebars
• Dimensions are listed as CW for center width, W for width, R for rise and PB for pullback
Ness Dresser style bars
A08041 1 1/4" Diameter for stock style
1 1/4" diameter handlebar
clamps, drilled for internal
wiring CW = 11" (28 cm), W =
35 3/4" (91 cm), R= 6 1/2"
(16.5 cm), PB = 10" (25 cm)
Ness Flat Track style bars
A08044 1 1/4" Diameter for 1 1/4"
handlebar clamp, drilled for
internal wiring CW = 7 1/2"
(19 cm), W = 31" (79 cm), R =
0" (0 cm), PB =6" (15 cm)
A08016 1" Diameter with indents CW =
5 1/2" (14 cm), W = 29 1/4"
(74 cm), R = 4 1/2" (11 cm), PB
= 8" (20 cm)
Ness Ape Hanger bars
Feature built-in risers. Require ZPN
A01471 riser bolt kit.
A08027 1" diameter High Bars, drilled
for internal wiring CW = 5"
(13 cm), W = 33" (84 cm), R =
19" (48 cm), PB = 8" (20 cm)
A08028 1 1/4" diameter Extra High,
drilled for internal wiring CW =
5" (13 cm), W = 39" (99 cm), R
= 19" (48 cm), PB =10"
(25 cm)
Handlebars
BILTWELL HANDLEBARS
Biltwell handlebars are precision crafted out of 100% seamless
4130 chromoly tubing with a burly .120" wall thickness. Available in
dimpled for stock H-D applications and non-dimpled for custom
applications.
Moto style
751727 Non-dimpled, chrome
751726 Non-dimpled, black
751729 Dimpled, chrome
751728 Dimpled, black
Breezer bars
Drag style T-bars
Mustache bars
ZED bars
H-bars
751747
751746
751749
751748
Non-dimpled, chrome
Non-dimpled, black
Dimpled, chrome
Dimpled, black
14
14-005
Handlebars
BILTWELL LOW DRAGS
Riserless bar with 1/2x13 UNC threaded insert welded into the bases
of each bar makes for a sturdy, compact and strong design. Bolt these
up and trim the ends just as narrow as you can stand for a nice lanesplitting profile. These bars generally do not require longer or shorter
cables. Chrome or Black electroplate finish and available smooth for
custom controls or dimpled for stock controls.
751763
751762
751765
751764
14
14-006
Chrome, undimpled
Black, undimpled
Chrome, dimpled
Black, dimpled
BILTWELL CLUBMAN HANDLEBARS
Biltwell Clubman Café Racer style handlebars are precision crafted
from 100% seamless 4130 chromoly.The wall thickness of the tubing
is a burly .120". Available only in 1" (25.4 mm) diameter and nondimpled for custom applications.
751852 Chrome
751851 Black electroplated
BILTWELL CHUMPS
Nice low rise bar that works with just about any bike.Want something
modern and comfortable, but not the wacky "check me out bro I'm so
radical!" styling? Maybe Chumps are the just ticket. Chrome or Black
electroplate finish and available smooth for custom controls or dimpled
for stock controls.
751755
751754
751757
751756
BILTWELL 12" APES
Traditional apehangers without the ridiculous dimensions of today's
contemporary tall bars.These are about as narrow as you can go at the
base and still mount up to a stock HD clamp. Knurled to eliminate
slipping. Chrome or Black electroplate finish and available smooth, or
dimpled for stock controls.
751751
751750
751753
751752
BILTWELL WINDOWS
Built for speed in the attack position these bars are strong and narrow.
Trim the ends off as much as possible and start dodging mirrors. Chrome
or Black electroplate finish and available smooth for custom controls
or dimpled for stock controls.
751759
751758
751761
751760
Chrome, undimpled
Black, undimpled
Chrome, dimpled
Black, dimpled
Chrome, undimpled
Black, undimpled
Chrome, dimpled
Black, dimpled
Chrome, undimpled
Black, undimpled
Chrome, dimpled
Black, dimpled
Handlebars
BILTWELL TRACKER HANDLEBARS
Racy and simple design is comfortable and built for performance.
Precision crafted with 100% seamless 4130 chromoly tubing with a
burly .120" wall thickness. Available smooth or dimpled for stock
controls, and in a Chrome or Black finish. These bars generally do not
require changes to brake lines or cables on Evolution Sportsters, but
fit Big Twins as well. All bars are knurled, 1" (25.4 mm) in diameter,
30" (76 cm) wide, 1 3/4" (4.5 cm) end rise and have a 12 degree pull
back.
751766 Black, non-dimpled
751767 Chrome, non-dimpled
751768 Black, dimpled
751769 Chrome, dimpled
BILTWELL HANDLEBARS
Biltwell handlebars are lightweight 4130 Chrome-moly tubing with super strong TIG welds.Available without dimples or dimpled to route the wiring
of 1982 to present switch housings . Available in chrome or black electroplate finish.
Frisco
Style
751818
751819
751822
751823
Chrome, no dimples
Black, no dimples
Chrome, dimpled
Black, dimpled
Keystone
style
751820
751821
751824
751825
Chrome, no dimples
Black, no dimples
Chrome, dimpled
Black, dimpled
Rise
Rise
cm
End
Rise
7"
7"
7"
7"
18 cm
18 cm
18 cm
18 cm
7"
7"
7"
7"
Rise
Rise
cm
End
Rise
5"
5"
5"
5"
12.5 cm
12.5 cm
12.5 cm
12.5 cm
2"
2"
2"
2"
End
Rise
cm
18 cm
18 cm
18 cm
18 cm
End
Rise
cm
5 cm
5 cm
5 cm
5 cm
Width
Width
cm
Center
Width
29"
29"
29"
29"
74 cm
74 cm
74 cm
74 cm
7"
7"
7"
7"
Width
Width
cm
Center
Width
28"
28"
28"
28"
71 cm
71 cm
71 cm
71 cm
8"
8"
8"
8"
Center
Width
cm
18 cm
18 cm
18 cm
18 cm
Center
Width
cm
20 cm
20 cm
20 cm
20 cm
Pull
Back
.94"
.94"
.94"
.94"
Pull
Back
2"
2"
2"
2"
Pull
Back
cm
2.4 cm
2.4 cm
2.4 cm
2.4 cm
Pull
Back
cm
5 cm
5 cm
5 cm
5 cm
14
14-007
Handlebars
1" (2,54 CM) TRIPLE CHROME PLATED HANDLEBARS
Changing the handlebars is the easiest way to change the look of your
motorcycle. Zodiac stocks the widest selection of chrome handlebars
on the market. For each model there are several triple chrome plated
handlebars available for both early (thru 1981) as well as late (1982 to
present) models. Late models have dimples for the wiring.All handlebars
have Mandrel bends, your guarantee for perfect symmetrical looks and
a constant diameter throughout the bar. More difficult to make but
worth it, because of their rich, smooth show bike appearance
096011 Drag-Bar
no dimples
096012 Drag-Bar
with dimples
241242 Drag-Bar
with dimples
End
Rise
0
0
0
Width
24 3/8"
(62 cm)
24 3/8"
(62 cm)
28"
(71 cm)
Center
Width
7 7/8"
(20 cm)
7 7/8"
(20 cm)
6 1/4"
(16 cm)
Pull
Back
5 3/4"
(15 cm)
5 3/4"
(15 cm)
4"
(10 cm)
096003
096005
096014
096001
096013
14
14-008
096008
096006
096009
241248 Ape Hanger
with dimples
241250 Ape Hanger
no dimples
End
Rise
15 3/4"
(40 cm)
19 3/4"
(50 cm)
Width
39 3/8"
(100 cm)
39 3/8"
(100 cm)
Center
Width
7"
(18 cm)
7"
(18 cm)
End
Rise
Stock Style
9 1/2"
no dimples
(24 cm)
Stock Style
9 1/2"
with dimples
(24 cm)
Custom Low
5 3/4"
no dimples
(15 cm)
Custom Low
5 3/4"
with dimples
(15 cm)
Custom Medium 8 5/8"
no dimples
(14 cm)
Custom Medium 8 5/8"
with dimples
(14 cm)
Custom High
13"
no dimples
(33 cm)
Custom High
13"
with dimples
(33 cm)
Width Center
Width
9 1/2" 4 3/4"
(24 cm) (12 cm)
27 1/2" 4 3/4"
(70 cm) (12 cm)
30"
7 7/8"
(76 cm) (20 cm)
30"
7 7/8"
(76 cm) (20 cm)
34 5/8" 7 7/8"
(88 cm) (20 cm)
34 5/8" 7 7/8"
(88 cm) (20 cm)
34 5/8" 9"
(88 cm) (23 cm)
34 5/8" 9"
(88 cm) (23 cm)
Pull
Back
9 1/2"
(24 cm)
9 1/2"
(24 cm)
13 3/4"
(35 cm)
13 3/4"
(35 cm)
7 1/2"
(19 cm)
7 1/2"
(19 cm)
7 7/8"
(20 cm)
7 7/8"
(20 cm)
Pull
Back
8 1/4"
(21 cm)
8 1/4"
(21 cm)
096002 Dresser Style
no dimples
096004 Dresser Style
with dimples
End
Rise
5"
(13 cm)
5"
(13 cm)
Width
36 5/8"
(93 cm)
36 5/8"
(93 cm)
Center
Width
12 1/2"
(32 cm)
12 1/2"
(32 cm)
Pull
Back
6 5/8"
(17 cm)
6 5/8"
(17 cm)
Handlebars
APEHANGERS
Apehanger handlebars have never been away. Zodiac's apehangers are made from heavy gauge tubing, have precision mandrel bend and feature
triple chrome plating.Available with or without dimples in 8" (20 cm) up to 20" (51 cm) heights. Dimples allow easy installation of 1982 to present
style handlebar controls.
Without
Dimple
096133
096120
096121
096122
096123
096124
096125
End
Rise
8" (20 cm)
10" (25 cm)
12" (30 cm)
14" (36 cm)
16" (41 cm)
18" (46 cm)
20" (51 cm)
Width
33" (84 cm)
36" (91 cm)
36" (91 cm)
36" (91 cm)
36" (91 cm)
36" (91 cm)
36" (91 cm)
Center
Width
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
Pull
Back
10" (25 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
TYPHOON HANDLEBARS
High quality handlebars from Zodiac, designed for style and comfort to put your bike above the rest. Made of thick wall 1" tubing, which is perfectly
polished and triple chrome plated or black powder coated. The use of a computer-operated welding machine ensures the exact symmetry of each
handlebar. Without dimples or holes for up to 1982 Harley models, and with dimples and holes for 1982 to present Harley models.
No holes or dimples
096326
Chrome
096327
Black
096324
Chrome
096325
Black
End Rise
8" (20 cm)
8" (20 cm)
12 3/4" (33 cm)
12 3/4" (33 cm)
Width
30" (76 cm)
30" (76 cm)
30" (76 cm)
30" (76 cm)
Center Width
9" (23 cm)
9" (23 cm)
9" (23 cm)
9" (23 cm)
Pull Back
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
With holes and dimples
096336
Chrome
096337
Black
096334
Chrome
096335
Black
End Rise
8" (20 cm)
8" (20 cm)
12 3/4" (33 cm)
12 3/4" (33 cm)
Width
30" (76 cm)
30" (76 cm)
30" (76 cm)
30" (76 cm)
Center Width
9" (23 cm)
9" (23 cm)
9" (23 cm)
9" (23 cm)
Pull Back
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
14
With
Dimple
096132
096126
096127
096128
096129
096130
096131
14-009
Handlebars
14
14-010
TOMAHAWK HANDLEBARS
Designed by Zodiac, these 1" handlebars stand out from the crowd.
All handlebars are knurled for use with regular or Springer handlebar
clamps. Available in raw steel, black powder coated or with a triple
plated chrome finish. Slotted for internal wiring and come with
removable end caps. Endcaps can also be used for most 1" diameter
handlebars.All Tomahawk handlebars are 30" (77 cm) wide and have
a 4" (10 cm) pull back.
Rise
End Rise
096603 Chrome
7 1/2" (19 cm) 3 1/2" (9 cm)
096609 Chrome Springer 7 1/2" (19 cm) 3 1/2" (9 cm)
096604 Black
7 1/2" (19 cm) 3 1/2" (9 cm)
096610 Black Springer
7 1/2" (19 cm) 3 1/2" (9 cm)
096605 Raw
7 1/2" (19 cm) 3 1/2" (9 cm)
096611 Raw Springer
7 1/2" (19 cm) 3 1/2" (9 cm)
096600 Chrome
12" (30 cm)
6 1/4" (16 cm)
096606 Chrome Springer 12" (30 cm)
6 1/4" (16 cm)
096601 Black
12" (30 cm)
6 1/4" (16 cm)
096607 Black Springer
12" (30 cm)
6 1/4" (16 cm)
096602 Raw
12" (30 cm)
6 1/4" (16 cm)
096608 Raw Springer
12" (30 cm)
6 1/4" (16 cm)
EXTENDED REACH HANDLEBARS FOR TOURING
MODELS
These handlebars are approximately 1 1/2" (4 cm) higher and 2" (5 cm)
further away from the rider as the stock handlebars found on Electra
Glide models. Also fit almost any other Harley model. Bars are drilled
and dimpled for internal wiring. Available in chrome and black.
End
Rise
9 3/4"
25 cm
096354
096355
Width
34"
86 cm
Chrome
Black
Center
Width
17"
43 cm
(OEM 56964-07)
Pull
Back
5"
13 cm
096613 Domed end cap, chrome, set of 4
096614 Domed end cap, black, set of 4
096615 Domed end cap, raw, set of 4
APEHANGERS
Apehanger handlebars have never been away. Zodiac's apehangers
are made from heavy gauge 1 1/4" tubing.All handlebars have Mandrel
bends, your guarantee for perfect symmetrical looks and a constant
diameter throughout the bar.These ultimate stylish handlebars feature
"reduced end" design to fit most standard or aftermarket controls,
grips, risers and top clamps. Available in black or chrome with an End
Rise of up to 18" (46 cm). Feature holes with dimples.
096400
096401
096402
096403
096404
096405
096410
096411
096412
096413
096414
096415
Chrome
Chrome
Chrome
Chrome
Chrome
Chrome
Black
Black
Black
Black
Black
Black
12" (30,5 cm)
13" (33 cm)
14" (35,5 cm)
16" (40,5 cm)
18" (46 cm)
20" (51 cm)
12" (30,5 cm)
13" (33 cm)
14" (35,5 cm)
16" (40,5 cm)
18" (46 cm)
20" (51 cm)
End Rise
9" (23 cm)
10" (25 cm)
12.5" (32 cm)
14.5" (37 cm)
16" (41 cm)
18" (46 cm)
9" (23 cm)
10" (25 cm)
12.5" (32 cm)
14.5" (37 cm)
16" (41 cm)
18" (46 cm)
Width
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
Center Width
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
11" (28 cm)
Pull Back
7.5" (20 cm)
7.5" (20 cm)
8" (21 cm)
8" (21 cm)
8.5" (22 cm)
9" (23 cm)
7.5" (20 cm)
7.5" (20 cm)
8" (21 cm)
8" (21 cm)
8.5" (22 cm)
9" (23 cm)
Handlebars
DRESSER STYLE "HIDDEN WIRE" HANDLEBAR
Now you can route your unsightly electrical wires through this "Hidden
Wire" handlebar.The bends of this handlebar are similar to those found
on early Dressers. Designed to fit Heritage Softail models from 1986 to
present, but also fits all models from 1982 to present with late style
handlebar controls that require the wiring dimple.
End
Rise
7 3/4"
20 cm
096350
096351
Width
29 3/4"
75 cm
Chrome
Black
Center
Width
13 1/4"
34 cm
(OEM 55920-83B)
Pull
Back
5 3/4"
15 cm
096016 Hidden wire
handlebar
with dimples
End Width
Rise
6 3/4" 33 1/2"
(17 cm) (85 cm)
Center
Width
12 1/2"
(32 cm)
Pull
Back
9 1/4"
(24 cm)
BAY AREA HANDLEBAR
A very stylish extra wide handlebar that brings back the "Forties" look
on your machine. The bar has a brilliant chrome plated finish. Looks
extremely good on Softail models.
Bay
Area
096053 no dimples
FLHRS STYLE HANDLEBARS
Perfect replica of the stock handlebars as found on 2004 thru
2007 FLHRS models. Also fit almost any other Harley model. Bars are
drilled and dimpled for internal wiring.Available in chrome and black.
End
Rise
5" (13 cm)
096352
096353
Width
30 1/2" (78 cm)
Chrome
Black
Center
Width
13 1/2" (34 cm)
(OEM 55908-04)
End
Rise
5"
(13 cm)
096051 with dimples 5"
(13 cm)
Width
38"
(97 cm)
38"
(97 cm)
Center
Width
10"
(25 cm)
10"
(25 cm)
Pull
Back
5"
(13 cm)
5"
(13 cm)
Pull
Back
11" (28 cm)
EXTRA WIDE "FLYER" BEACH BAR
If you have been looking for extra-wide handlebars, you found them.
These bars will give your motorcycle a total different look. Made of
thick wall 1" (2,54 cm) tubing, which is perfectly polished and triple
chrome plated. Available without dimples for models up to 1981 and
dimpled model to fit 1982 to present models.
Beach
Bar
096023 no dimples
End
Rise
1"
(2,54 cm)
096022 with dimples 1"
(2,54 cm)
Width
Center
Width
40"
10"
(102 cm) (25 cm)
40"
10"
(102 cm) (25 cm)
Pull
Back
7 1/4"
(18 cm)
7 1/4"
(18 cm)
14
TOURING STYLE HANDLEBARS
Perfect replica of the stock handlebars as found on 1971 thru
1983 4-speed FL models and 1983 thru 1987 FLHT and FLT models.
Also fit almost any other Harley model.Available in chrome and black.
14-011
Handlebars
ZODIAC'S "FAT BUBBA" LARGE DIAMETER HANDLEBARS
Eliminate the wimpy look of the standard 1" (2.54 cm) diameter handlebar with these 1 1/4" (32 mm) diameter "Fat Bubba" handlebars. 25%
thicker than stock, they offer quality and great comfort. These ultimate stylish handlebars feature "reduced end" design to fit all standard or
aftermarket controls, grips, risers and top clamps. Although the bars suit stock handlebar clamps and risers, we offer matching design Bulky Fat
covers elsewhere in this catalog to finish the look. "Fat Bubba" bars are dimpled and drilled for 1982 to present handlebar controls and wiring
for easy installation.
14
14-012
096110
096111
096112
Low T-Bar with dimples
Medium T-Bar dimples
High T-Bar with dimples
End Rise
6" (15 cm)
8" (21 cm)
10" (25 cm)
Width
31" (74 cm)
31" (74 cm)
31" (74 cm)
Center Width
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
Pull Back
10 1/2" (27 cm)
11 1/2" (29 cm)
12 1/2" (32 cm)
096039
096040
096034
096035
096036
Buckhorn with dimples
XLX Style with dimples
Low Apehanger dimples
Medium Apehanger dimples
High Apehanger with dimples
End Rise
9 1/2" (24 cm)
8 5/8" (22 cm)
10" (25 cm)
12" (30 cm)
16" (41 cm)
Width
27 1/2" (70 cm)
34 5/8" (88 cm)
37 1/2" (95 cm)
35 1/2" (90 cm)
39 1/2" (100 cm)
Center Width
4 3/4" (12 cm)
7 7/8" (20 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
Pull Back
9 1/2" (24 cm)
7 1/2" (19 cm)
10" (25 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
Handlebars
Road King Style dimples
Knuckle Style with dimples
Staghorn with dimples
Wildcat V-Style dimples
Wildcat Radial T-Bar with dimples
Broken Arrow Z-Bar with dimples
Wildcat XT T-Bar with dimples
End Rise
5 1/2" (14 cm)
4 1/2" (11 1/2 cm)
2 1/2" (6 cm)
12 1/2" (32 cm)
10" (25 cm)
15" (38 cm)
15" (38 cm)
Width
36 1/2" (93 cm)
36 1/2" (93 cm)
36" (91 cm)
30 1/2" (77 cm)
31 3/4" (81 cm)
33" (81 cm)
33 1/2" (85 cm)
Center Width
12" (30 cm)
10 1/2" (27 cm)
11" (28 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
12" (30 cm)
10" (25 cm)
Pull Back
16" (41 cm)
8 1/2" (22 cm)
8 3/4" (22 cm)
18 1/2" (47 cm)
4" (10 cm)
10" (25 cm)
10" (25 cm)
ZODIAC'S FAT BUBBA LARGE DIAMETER SIX-BEND
BAGGER STYLE HANDLEBARS
Eliminate those stock flimsy 1" (25.4 mm) diameter handlebars and
go for the beefy looks of these 1 1/4" (32 mm) diameter Fat Bubba
handlebars. These handlebars feature standard 1" diameter ends to
accommodate for stock and most aftermarket handlebar controls and
also have regular 1" diameter mid section to work with the stock onepiece upper handlebar clamp. Bars are drilled and dimpled for internal
wiring. Available in chrome and black in 8" (20cm), 12" (31 cm), 13"
(33 cm) and 16" (41 cm) high.
Width
38"
96.5 cm
Center
Width
11"
28 cm
Pull
Back
7 1/4"
18.5 cm
height
096360
096361
096362
096363
096364
096365
096366
096367
Chrome
Black
Chrome
Black
Chrome
Black
Chrome
Black
8" (20 cm)
8" (20 cm)
12" (31 cm)
12" (31 cm)
13" (33 cm)
13" (33 cm)
16" (41 cm)
16" (41 cm)
14
096037
096038
096144
094140
096143
096145
096149
14-013
Handlebars
PHAT HANDLEBARS
These USA made bars have the ultimate style, great comfort and quality.At 1 1/4" (3 cm) diameter, they are 25% thicker than stock, and eliminate
the wimpy look of the standard 1" (2,54 cm) handlebars. The "step down" design fits all standard or aftermarket controls, grips, risers and top
clamps. For an even smoother finish you may combine these handlebars with Phat top-clamp covers found elsewhere in this catalog.All handlebars
are dimpled and drilled for 1982 to present handlebar controls and wiring for easy installation.
14
14-014
741301
741326
741302
741303
741324
741325
6" T-Bar with dimples
6" Low Profile Drag with dimples
8" T-Bar with dimples
10" T-Bar dimples
8" Chopper Drag-Bar dimples
10" Chopper Drag-Bar with dimples
End Rise
4" (10 cm)
4" (10 cm)
5" (13 cm)
6" (15 cm)
8" (20 cm)
10" (25 cm)
Width
31" (79 cm)
30 1/2" (77 cm)
31" (79 cm)
31" (79 cm)
31" (79 cm)
31" (79 cm)
Center Width
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
3 1/2" (9 cm)
3 1/2" (9 cm)
Pull Back
10 1/2" (27 cm)
14 1/2" (37 cm)
11 1/2" (29 cm)
12 1/2" (32 cm)
0
0
Handlebars
741306
741307
741308
741309
741323
High Ape with dimples
High Ape dimples
High Ape with dimples
High Ape dimples
Ape Hanger Bar with dimples
End Rise
8 1/2" (22 cm)
10" (25 cm)
12,5" (32 cm)
16" (41 cm)
20" (51 cm)
Width
36 1/2" (93 cm)
37 1/2" (94 cm)
38 1/2" (98 cm)
39 1/2" (100 cm)
39 1/2" (100 cm)
Center Width
11 1/2" (29 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
Pull Back
10" (25 cm)
10" (25 cm)
10" (25 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
741312
741311
741322
741304
741305
741313
741314
Road King Bar dimples
Dresser Springer with dimples
Heritage Style dimples
Knuckle Style with dimples
Springer Knuckle Style with dimples
Dragster Bar with dimples
Dragster Springer dimples
End Rise
5 1/2" (14 cm)
5 1/2" (14 cm)
4 1/2" (11 cm)
2" (5 cm)
2" (5 cm)
0
0
Width
32 1/2" (83 cm)
34 1/2" (88 cm)
32 1/2" (83 cm)
36 1/2" (93 cm)
36 1/2" (93 cm)
31" (79 cm)
31" (79 cm)
Center Width
12" (30 cm)
12" (30 cm)
12" (30 cm)
10 1/2" (27 cm)
10 1/2" (27 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
Pull Back
16" (41 cm)
12" (30 cm)
16" (41 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
6" (15 cm)
6" (15 cm)
14
14-015
Handlebars
AMERICAN MADE MUCHO-FATZO HANDLEBARS
Eliminate that wimpy look of your stock 1" (2,54 cm) diameter handlebars with these 50% thicker Mucho-Fatzo bars. Made in the U.S.A. for style,
comfort and quality. The "step down" design fits all standard or aftermarket controls and grips. T-Bars bolt straight on to all stock and most
aftermarket top triple trees. Mucho-Fatzo Ape Hangers must be installed in conjunction with the matching Mucho-Fatzo risers and topclamps. All
Mucho-Fatzo bars are dimpled and drilled for 1982 to present handlebar controls and wiring for easy installation.
14
14-016
741315
741316
741317
T-Bar with dimples
T-Bar with dimples
T-Bar with dimples
741318
741319
741320
741321
Low Ape Hanger with dimples
Medium Ape Hanger with dimples
High Ape Hanger with dimples
Aluminum riser set for use with 1 1/2"
handlebars
End Rise
5" (13 cm)
7" (18 cm)
9" (23 cm)
Width
31" (79 cm)
31" (79 cm)
31" (79 cm)
Center Width
8 1/2" (22 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
Pull Back
4 1/2" (11 cm)
5" (13 cm)
6 1/8" (16 cm)
End Rise
13" (33 cm)
16" (41 cm)
18" (46 cm)
Width
38 1/2" (98 cm)
39 1/2" (100 cm)
39 1/2" (100 cm)
Center Width
11 1/2" (29 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
Pull Back
10" (25 cm)
11 1/2" (29 cm)
11 1/2" (29 cm)
Handlebars
BURLY NARROW APEHANGERS
Burly Narrow Apehangers look extremely good on Sportsters and Dyna's
with Narrow Glide front forks, but fit bikes with Wide Glide front ends
too. All Narrow Glide Apes are 1" (25.4 mm) in diameter, have a 5"
(12.7 cm) center width, 7" (17.8 cm) pull back and are 32 1/2" (83 cm)
wide. Bars are dimpled and slotted for easy internal wiring, available
in black and chrome and in 3 different heights.
744805 12" (30.5 cm) high, chrome
744806 12" (30.5 cm) high, black
744807 14" (36 cm) high, chrome
744808 14" (36 cm) high, black
744809 16" (41 cm) high, chrome
744810 16" (41 cm) high, black
14
14-017
Handlebars
FEHLING HANDLEBARS
High quality handlebars from the German manufacturer Fehling, designed for style and comfort to put your bike above the crowd. The use of a
computer-operated bending machine ensures the exact symmetry of each handlebar. Nearly all Fehling handlebars are TÜV approved with 1"
(2,54 cm) diameter. Handlebars are available in various models in either high quality chrome or black powder coated: without dimples for up to
1982 Harley models, and with dimples for 1982 to present Harley models. Some models are available "slotted", to allow you to guide all wiring
through handlebar and risers. Please note that this requires large diameter risers, and hollow studs. There is a wide variety of styles available, but
remember, with any Fehling handlebar you are ready to race, chase, cruise and show.
14
14-018
731629
731630
731587
731631
731632
731633
731634
731660
731661
731662
731663
731597
731598
731664
731665
731666
731667
731623
731624
Dirt Tracker no dimples
Dirt Tracker with dimples
Black Dirt Tracker with dimples
Electra Glide with dimples
Buckhorn Low with dimples
Buckhorn High with dimples
Superbar with dimples
Apehanger Low no dimples
Apehanger Low with dimples
Apehanger Medium no dimples
Apehanger Medium with dimples
Apehanger Medium 3-hole
Apehanger Medium 4-hole
Apehanger High no dimples
Apehanger High with dimples
Apehanger Sky High no dimples
Apehanger Sky High with dimples
Apehanger Near Space no dimples
Apehanger Near Space with dimples
End Rise
4" (10 cm)
4" (10 cm)
4" (10 cm)
6 1/2" (16 cm)
2 1/2" (6 cm)
5" (12 cm)
5" (12 cm)
10 1/2" (27 cm)
10 1/2" (27 cm)
12" (31 cm)
12" (31 cm)
12" (31 cm)
12" (31 cm)
16 1/2" (42 cm)
16 1/2" (42 cm)
18" (46 cm)
18" (46 cm)
20" (50 cm)
20" (50 cm)
Width
36" (91 cm)
36" (91 cm)
36" (91 cm)
35" (89 cm)
40" (100 cm)
41" (104 cm)
39" (99 cm)
35 1/2" (90 cm)
35 1/2" (90 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
36" (92 cm)
38" (96 cm)
38" (96 cm)
38" (96 cm)
38" (96 cm)
40" (100 cm)
40" (100 cm)
Center Width
10" (25 cm)
10" (25 cm)
10" (25 cm)
14 1/2" (37 cm)
11" (28 cm)
8" (20 cm)
9" (23 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
7 (18 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
8 1/2" (21 cm)
8 1/2" (21 cm)
8" (20 cm)
8" (20 cm)
Pull Back
4 1/2" (11 cm)
4 1/2" (11 cm)
4 1/2" (11 cm)
11 1/2" (29 cm)
11" (28 cm)
14" (35 cm)
8 1/2" (22 cm)
10" (25 cm)
10" (25 cm)
8" (20 cm)
8" (20 cm)
8" (20 cm)
8" (20 cm)
8 1/2" (22 cm)
8 1/2" (22 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
Handlebars
731615
V-Bar, raked triple trees, with dimples
End Rise
0
Width
36" (92 cm)
38" (96 cm)
38" (96 cm)
40" (100 cm)
35 1/2" (90 cm)
Center Width
7" (18 cm)
7" (18 cm)
8 1/2" (21 cm)
8" (20 cm)
7" (18 cm)
Pull Back
8" (20 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
10" (25 cm)
Width
38" (97 cm)
Center Width
8" (20 cm)
Pull Back
4" (10 cm)
Notes:
• D IMPLED HANDLEBARS HAVE INDENTS AT THE HANDLEBAR CONTROLS TO ROUTE THE SWITCH WIRING .
• 3-H OLE HANDLEBARS ALLOW ROUTING OF THE SWITCH WIRING THROUGH THE HANDLEBARS . W IRING
EXITS IN THE MID LOWER PART OF THE HANDLEBARS .
• 4-H OLE HANDLEBARS ALLOW ROUTING OF THE SWITCH WIRING THROUGH THE HANDLEBARS AND
W IRE "
RISERS SUCH AS
ZPN 731590, 731591
OR
"H IDDEN
14
731599
731604
731614
731617
731639
End Rise
Apehanger Medium Black, with dimples
12" (30 cm)
Apehanger High Black, with dimples
16" (41 cm)
Apehanger Sky High Black, with dimples 18" (46 cm)
Apehanger Near Space Black, with dimples 20" (50 cm)
Apehanger Low Black, with dimples
10 1/2" (27 cm)
731592.
14-019
Handlebars
14
14-020
731600
731605
731690
731608
731601
731606
731691
731693
731692
731694
731618
731602
731607
731603
731609
Drag-Bar Narrow with dimples
Drag-Bar with dimples
Drag-Bar Black with dimples
Drag-Bar no dimples
Drag-Bar Black with dimples
Drag-Bar 4-hole
Drag-Bar Wide Black with dimples
Drag-Bar Wide 4-hole
Drag-Bar Wide 3-hole
Drag-Bar Extra Wide no dimples
Drag-Bar Extra Wide with dimples
Drag-Bar Extreme Wide no dimples
Drag-Bar Extreme Wide with dimples
End Rise
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Width
25" (64 cm)
28" (71 cm)
28" (71 cm)
30" (76 cm)
32" (81 cm)
32" (81 cm)
32" (81 cm)
32" (81 cm)
36"
36" (91 cm)
36" (91 cm)
38" (97 cm)
38" (97 cm)
40 1/2" (103 cm)
40 1/2" (103 cm)
Center Width
7 1/2" (19 cm)
9" (23 cm)
9" (23 cm)
12" (30 cm)
8 1/4" (21 cm)
8 1/4" (21 cm)
8 1/4" (21 cm)
8 1/4" (21 cm)
12"
12" (30 cm)
12" (30 cm)
13 1/2" (34 cm)
13 1/2" (34 cm)
15" (38 cm)
15" (38 cm)
Pull Back
5" (13 cm)
5 1/2" (14 cm)
5 1/2" (14 cm)
3" (8 cm)
4 3/4" (12 cm)
4 3/4" (12 cm)
4 3/4" (12 cm)
4 3/4" (12 cm)
5"
5" (13 cm)
5" (13 cm)
6 1/2" (17 cm)
6 1/2" (17 cm)
7" (18 cm)
7" (18 cm)
731645
Z-Bar no dimple
End Rise
10" (25 cm)
Width
28" (71 cm)
Center Width
9 1/2" (24 cm)
Pull Back
5 1/2" (14 cm)
Handlebars
Dirty Bar Extra Wide no dimples
Dirty Bar Extra Wide with dimples
Dirty Bar Extra Wide
Dirty Bar Extra Wide 4-hole
Flat-Track Bar Wide no dimples
Flat-Track Bar Wide with dimples
Flat-Track Bar Wide Black, with dimples
Flat-Track Bar Wide 4-hole
Flyerbar Extra Wide no dimples
Flyerbar Extra Wide w dimples
Flyerbar Extra Wide Black, with dimples
Flyerbar Extra Wide 4-hole
Flyerbar Medium no dimples
Flyerbar Medium with dimples
Flyerbar Medium Black, with dimples
Flyerbar Medium 4-hole
End Rise
8 1/4" (21 cm)
8 1/4" (21 cm)
8 1/4" (21 cm)
8 1/4" (21 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
1 1/2" (4 cm)
1 1/2" (4 cm)
1 1/2" (4 cm)
1 1/2" (4 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
Width
38" (97 cm)
38" (97 cm)
38" (97 cm)
38" (97 cm)
36" (91 cm)
36" (91 cm)
36" (91 cm)
36" (91 cm)
40" (102 cm)
40" (102 cm)
40" (102 cm)
40" (102 cm)
34 1/2" (88 cm)
34 1/2" (88 cm)
34 1/2" (88 cm)
34 1/2" (88 cm)
Center Width
11" (27 cm)
11" (27 cm)
11" (27 cm)
11" (27 cm)
12 1/2" (32 cm)
12 1/2" (32 cm)
12 1/2" (32 cm)
12 1/2" (32 cm)
7 1/2" (19 cm)
7 1/2" (19 cm)
7 1/2" (19 cm)
7 1/2" (19 cm)
8" (20 cm)
8" (20 cm)
8" (20 cm)
8" (20 cm)
Pull Back
7" (18 cm)
7" (18 cm)
7" (18 cm)
7" (18 cm)
10" (25 cm)
10" (25 cm)
10" (25 cm)
10" (25 cm)
5" (13 cm)
5" (13 cm)
5" (13 cm)
5" (13 cm)
7 1/2" (19 cm)
7 1/2" (19 cm)
7 1/2" (19 cm)
7 1/2" (19 cm)
Notes:
W IRE "
RISERS SUCH AS
ZPN 731590, 731591
OR
"H IDDEN
14
731680
731681
731682
731683
731685
731686
731687
731688
731670
731671
731672
731673
731675
731676
731677
731678
731592.
14-021
Handlebars
731593
731596
731594
731595
731610
731612
731613
Dirty Bar Extra Wide 3-hole
Power Bar Extra Wide 4-hole
Flyerbar Extra Wide 3-hole
Flyerbar 3-hole
Straight Bar Extra Wide no dimples
Straight Bar Extra Wide with dimples
Straight Bar Wide with dimples
End Rise
8 1/4" (21 cm)
5" (13 cm)
4" (10 cm)
2" (6 cm)
0
0
0
Width
38" (97 cm)
41" (104 cm)
40" (102 cm)
33" (84 cm)
39" (99 cm)
39" (99 cm)
33" (84 cm)
Center Width
11" (27 cm)
7" (18 cm)
7" (18 cm)
6" (15 cm)
0
0
0
Pull Back
7" (18 cm)
7" (18 cm)
7" (18 cm)
6" (15 cm)
0
0
0
731950
731951
731952
731643
731642
731644
731647
731648
731659
731668
Superbike with dimples
Dresser Style with dimples
Beach Bar with dimples
Western Bar High with dimples
Western Bar Medium
Cruiser Bar with dimples
Super-Bike-Bar Small no dimples
Super-Bike-Bar Small with dimples
Power-Bike-Bar no dimples
Power-Bike-Bar Black, with dimples
End Rise
3" (8 cm)
8" (20 cm)
2 1/2" (6 cm)
10" (25 cm)
7" (18 cm)
2 3/4" (7 cm)
3" (8 cm)
3" (8 cm)
5 1/4" (14 cm)
5 1/4" (14 cm)
Width
32" (81 cm)
39" (99 cm)
36" (91 cm)
32 1/2" (83 cm)
39" (100 cm)
39 3/4" (101 cm)
32"(81 cm)
32" (81 cm)
41 1/4" (105 cm)
41 1/4" (105 cm)
Center Width
12" (30 cm)
15 1/2" (39 cm)
8 1/2" (22 cm)
8" (20 cm)
10 1/4" (26 cm)
10 1/4" (26 cm)
8 3/4" (22 cm)
8 3/4" (22 cm)
7 1/2" (19 cm)
7 1/2" (19 cm)
Pull Back
4" (10 cm)
8 1/2" (22 cm)
6" (15 cm)
6 3/4" (17 cm)
8 1/4" (21 cm)
11 1/2" (29 cm)
4 1/8" (11 cm)
4 1/8" (11 cm)
7" (18 cm)
7" (18 cm)
14
14-022
Handlebars
FEHLING HANDLEBARS FOR V-ROD
Designed for use on all 2002 and later V-Rod models, the handlebars have all dimples and holes to allow you to route the handlebar switch wiring
thru the handlebars. Mounting holes to accept the OEM instrument console are already welded in place. Available in four models.
Drag Bar w dimples
Super Bike Bar w dimples
Flyerbar w dimples
Ape Hanger Low with dimples
End Rise
5 1/2" (14 cm)
7 1/4" (18 cm)
6" (15 cm)
16 3/4" (27 cm)
Width
32 1/4" (82 cm)
36 1/4" (92 cm)
33 1/2" (85 cm)
35 1/2" (90 cm)
Center Width
6 1/2" (17 cm)
7 1/4" (18 cm)
7 1/2" (19 cm)
7" (18 cm)
Pull Back
3 3/4" (10 cm)
3 1/2" (9 cm)
5 1/2" (14 cm)
7" (18 cm)
Notes:
W IRE "
RISERS SUCH AS
ZPN 731590, 731591
OR
731592.
"H IDDEN
14
731697
731696
731698
731641
14-023
Handlebars
FEHLING T-BAR
Fehling's TÜV approved T-Bar.
731654
End Rise
8 3/4"
T-Bar no dimples
Width
31 1/2"
Center Width
4"
Pull Back
6 1/4"
Width
39" (99 cm)
39" (99 cm)
38" (96 cm)
38" (96 cm)
Center Width
10" (25 cm)
10" (25 cm)
16 1/2" (42 cm)
16 1/2" (42 cm)
Pull Back
2,36" (6 cm)
2,36" (6 cm)
4,33" (11 cm)
4,33" (11 cm)
14
14-024
FEHLING DRAGBAR WITH INTEGRATED
TURNSIGNALS
The solutions for those who want a clean front end and turn signals
are mandatory. Fehling has integrated the turn signals into the
handlebar. Handlebars are dimpled for use with 1982 to present
handlebar controls. Available in black or chrome.
731620
731669
731619
731625
731638
731674
End Rise
-
Chrome with dimples
Black with dimples
Chrome with dimples
Black with dimples
Replacement lens
Replacement bulb
Notes:
W IRE "
RISERS SUCH AS
ZPN 731590, 731591
OR
731592.
"H IDDEN
Handlebars
FEHLING FAT BAR 1 1/4" HANDLEBARS
Fehling's 1 1/4" (31.75 mm) diameter Fat Bars for use with 1 1/4"
diameter risers have 1" (25.4 mm) diameter grip ends for stock and
most aftermarket handlebar controls.The 1 1/4" diameter handlebars
were introduced in 2002 on Screamin' Eagle Touring models, in 2005 on
the Screamin' Eagle Fat Boy, in 2007 on all Fat Boys, in 2008 on the
FXDF Dyna Fat Bob and in 2010 on the FXDWG Dyna Wide Glide. Can
also be used on other models when used with stock or aftermarket
1 1/4" diameter risers.The handlebars feature drilled dimples, 2 drilled
holes where the risers go, as well as a center slot to route the handlebar
control wires. Available in chrome or black finish. TÜV approved.
732014
732015
732016
732017
732018
732019
732020
732021
732022
732023
732024
732025
Z-Bar, chrome
Z-Bar, black
High Ape-hanger, chrome
High Ape-hanger, black
Apehanger, chrome
Apehanger, black
Dirty-Bar, chrome
Dirty-Bar, black
Drag-Bar, chrome
Drag-Bar, black
Flyer-Bar, chrome
Flyer-Bar, black
Width
34.3" (87 cm)
34.3" (87 cm)
37.4" (95 cm)
37.4" (95 cm)
36.4" (92.5 cm)
36.4" (92.5 cm)
39" (99 cm)
39" (99 cm)
32" (81.5 cm)
32" (81.5 cm)
34.3" (87 cm)
34.3" (87 cm)
Pull Back
4.7" (12 cm)
4.7" (12 cm)
7.7" (19.5 cm)
7.7" (19.5 cm)
7.7" (19.5 cm)
7.7" (19.5 cm)
9" (23 cm)
9" (23 cm)
4.7" (12 cm)
4.7" (12 cm)
7.1" (18 cm)
7.1" (18 cm)
End Rise
3.5" (9 cm)
3.5" (9 cm)
13.8" (35 cm)
13.8" (35 cm)
10.4" (26.5 cm)
10.4" (26.5 cm)
14.8" (37.5 cm)
14.8" (37.5 cm)
0
0
3" (7.5 cm)
3" (7.5 cm)
Center Width
12" (30.5 cm)
12" (30.5 cm)
12.2" (31 cm)
12.2" (31 cm)
12.2" (31 cm)
12.2" (31 cm)
14.8" (37.5 cm)
14.8" (37.5 cm)
8.9" (22.5 cm)
8.9" (22.5 cm)
6.9" (17.5 cm)
6.9" (17.5 cm)
14
14-025
Handlebars
FEHLING HOLLISTER FAT BARS
Fehling's 1 3/16" (30 mm) diameter Hollister Fat Bars are for use with
regular 1" (25.4 mm) diameter risers and have 1" (25.4 mm) diameter
grip ends for use with stock and most aftermarket handlebar controls.
The handlebars feature drilled dimples and a center slot to route the
handlebar control wires. Available in chrome or black finish. TÜV
approved.
732010
732011
732012
732013
Low Z-Bar, chrome
Low Z-Bar, black
High Z-Bar, chrome
High Z-Bar, black
Width
34.3" (87 cm)
34.3" (87 cm)
35.4" (90 cm)
35.4" (90 cm)
Pull Back
4.7" (12 cm)
4.7" (12 cm)
4.7" (12 cm)
4.7" (12 cm)
End Rise
3.5" (9 cm)
3.5" (9 cm)
7.9" (20 cm)
7.9" (20 cm)
Center Width
12" (30.5 cm)
12" (30.5 cm)
15" (38 cm)
15" (38 cm)
14
14-026
Notes:
• D IMPLED HANDLEBARS HAVE INDENTS AT THE
HANDLEBAR CONTROLS TO ROUTE THE SWITCH
WIRING .
• 3-H OLE HANDLEBARS ALLOW ROUTING OF THE
SWITCH WIRING THROUGH THE HANDLEBARS .
W IRING
EXITS IN THE MID LOWER PART OF
THE HANDLEBARS .
FEHLING SIX-BEND 1 1/4" HANDLEBARS
Fehling's 1 1/4" (31.75mm) diameter handlebars for use with 1 1/4"
diameter risers have 1" (25.4 mm) diameter grip ends for stock and
most aftermarket handlebar controls.The 1 1/4" diameter handlebars
were introduced in 2002 on Screamin' Eagle Touring models, in 2005 on
the Screamin' Eagle Fat Boy, in 2007 on all Fat Boys, in 2008 on the
FXDF Dyna Fat Bob and in 2010 on the FXDWG Dyna Wide Glide. Can
also be used on other models when used with stock or aftermarket
1 1/4" diameter risers.The handlebars feature drilled dimples, 2 drilled
holes where the risers go, as well as a center slot to route the handlebar
control wires. Fehling Six-Bend style bars are available in two different
heights and in chrome or black finish. TÜV approved.
732026
732027
732028
732029
Low, chrome
Low, black
High, chrome
High, black
Width
37.4" (95 cm)
37.4" (95 cm)
40.4" (102.5 cm)
40.4" (102.5 cm)
SWITCH WIRING THROUGH THE HANDLEBARS
"H IDDEN W IRE " RISERS SUCH AS ZPN
731590, 731591 OR 731592.
AND
Pull Back
9.6" (24.5 cm)
9.6" (24.5 cm)
10.4" (26.5 cm)
10.4" (26.5 cm)
End Rise
11.2" (28.5 cm)
11.2" (28.5 cm)
13.2" (33.5 cm)
13.2" (33.5 cm)
Center Width
12.8" (32.5 cm)
12.8" (32.5 cm)
13.6" (34.5 cm)
13.6" (34.5 cm)
Handlebars
"ROLAND SANDS DESIGN" HANDLEBARS
Designed by Roland Sands, these 1" handlebars stand out from the
rest. All handlebars are knurled for use with regular or Springer
handlebar clamps.Available in raw steel, black powder coated or with
a chrome finish. Chrome and black handlebars are also slotted and
drilled for internal wiring and come with removable chrome billet end
caps. Raw handlebars come with raw billet end caps.
Short Stack
End Rise
Width
Center Width
7 1/2" (19 cm)30" (76 cm) 6 1/2" (16 cm)
740712 Chrome finish
740708 Raw steel
740711 Black powder coated
751973
Black OPS
740715 Springer, chrome finish
740713 Springer, Raw steel
740714 Springer, black powder coated
751974
Springer, Black OPS
751977
Replacement end caps, pair
Pull Back
-
Pull Back
-
Notes:
• D IMPLED HANDLEBARS HAVE INDENTS AT THE
HANDLEBAR CONTROLS TO ROUTE THE SWITCH
WIRING .
SWITCH WIRING THROUGH THE HANDLEBARS .
W IRING
EXITS IN THE MID LOWER PART OF
THE HANDLEBARS .
SWITCH WIRING THROUGH THE HANDLEBARS
"H IDDEN W IRE " RISERS SUCH AS ZPN
731590, 731591 OR 731592.
AND
14
Vintage
End Rise
Width
Center Width
12" (30 cm) 30" (76 cm) 6 1/2" (16 cm)
740621 Raw steel
751975
Black OPS
740622 Springer, chrome finish
740623 Springer, raw steel
740723 Springer, black powder coated
751976
Springer, Black OPS
14-027
Handlebars
ROLAND SANDS DESIGNS VINTAGE KING APE
It seems like you can never make an ape hanger bar too big so Roland
shot for the sky with his King Ape. Borrowing some style from his classic
Vintage bar, he made everything a little larger, including the tubing
diameter to give you a punk tall bar with attitude, style and quality
hand TIG welding. King Ape bars are 1 1/4" (32 mm) fat bars with a
regular 1" diameter center mounting and 1" ends to accept stock and
aftermarket controls. Bars are slotted and drilled for internal wiring
and come in chrome or black powder coated.
14
14-028
740925
751979
740926
740918
751978
740919
Black
Black OPS
Chrome
Black
Black OPS
Chrome
Rise
Width
19" (48 cm)
19" (48 cm)
19" (48 cm)
16’’(41 cm)
16’’(41 cm)
16’’(41 cm)
38" (96 cm)
38" (96 cm)
38" (96 cm)
36 1/2" (93 cm)
36 1/2" (93 cm)
36 1/2" (93 cm)
Center
Width
9 3/4" (25 cm)
9 3/4" (25 cm)
9 3/4" (25 cm)
9 3/4" (25 cm)
9 3/4" (25 cm)
9 3/4" (25 cm)
Pull
Back
6 1/4" (16 cm)
6 1/4" (16 cm)
6 1/4" (16 cm)
6’’ (15 cm)
6’’ (15 cm)
6’’ (15 cm)
ROLAND SANDS DESIGN RIBBED HANDLEBARS
These RSD handlebars are an original take on two timeless designs.
Roland took these classic shapes and added his signature radius ribbing
for an extra detail.These CNC milled ribbed accents match perfectly with
Roland's Nostalgia ribbed cover line. These bars are a stand out and a
beautiful finishing touch to any custom build or customized stocker.
Not to tall, not to short these bars are perfect for a clean yet comfortable
ride while still looking tough. Bars are 1" diameter to accept stock or
aftermarket handlebar controls. Hand built and TIG welded in the good
ol' USA. The T-Bar is internally threaded for use with 1/2"-13 UNC
hardware and slotted for stock handlebar controls, for internal wiring
the lower wiring holes must be drilled.The Bobber is slotted and drilled
for internal wiring and is knurled 3 1/2" (89 mm) on-center for use
with most stock and aftermarket forks, except Springers.
740894
740895
RSD Ribbed Bobber
RSD Ribbed T-Bar
Width
33" (84 cm)
27" (69 cm)
Rise
9" (23 cm)
6" (15 cm)
Center Width
5 3/4" (15 cm)
Pull Back
5 1/2" (14 cm)
4" (10 cm)
Handlebars
"ROLAND SANDS DESIGN" HANDLEBARS FOR
TOURING MODELS
Roland Sands initially designed these handlebars to allow installation
on fairing equipped Touring models, but they will fit on numerous other
applications as well.Available in black powder coated or with a chrome
finish. Handlebars are slotted, knurled and drilled for internal wiring
and stock or aftermarket hand controls. The stylish multi-hole drilled
corner gussets offer strength and rigidity. Removable chrome billet end
caps are included. Handlebars listed for 2008 to present Touring models
are fully compatible with the Fly-By-Wire electronic throttle control.
MINI APE CROSSBAR
The RSD High rise mini ape with a stylized billet crossbar will take you
back to your BMX days.These 1" diameter handlebars have heim joints
on both ends of crossbar to give a mechanical look and allow the
crossbar to be tightened until snug. Features knurling at 3 1/2" (89 mm)
on center.
751981 "Black OPS" Textured black
751980 Gloss black with Contrast Cut Crossbar
End
Width
Center
Pull
rise
width
back
9" (23 cm) 34.4" (87 cm) 14 3/4" (37 cm) 6" (15 cm)
740716 Glider, black, 1998 thru 2007 FLTR
740717 Glider, chrome, 1998 thru 2007 FLTR
740726 Glider, black, 2008 to present FLTR
740727 Glider, chrome, 2008 to present FLTR
End
Width
Center
Pull
rise
width
back
9" (23 cm) 33" (84 cm)
14" (36 cm)
5 3/4" (15 cm)
740720 Lazyboy, black, 1986 thru 2007 FLHT & FLHX
740721 Lazyboy, chrome, 1986 thru 2007 FLHT & FLHX
740728 Lazyboy, black, 2008 to present FLHT & FLHX
740729 Lazyboy, chrome, 2008 to present FLHT & FLHX
ROLAND SANDS MOTO CROSSBAR
Low rise aggressive motocross bend handlebar with a stylized billet
crossbar. Features heim joints on both ends of the crossbar to add a
mechanical look and allow the crossbar to be tightened until snug.The
Crossbar is slotted and drilled for internal wiring and has knurling at
3.5" (89mm) on center. Contrast Cut is a gloss black bar with a Contrast
Cut Crossbar, Black Ops is a textured black bar with a Black Ops
Crossbar.
751983 Black OPS
751982 Contrast Cut
End
Width
Center
Pull
rise
width
back
9" (23 cm) 33" (84 cm)
7 3/4" (20 cm) 4" (10 cm)
740718 Convoy, black, 1986 thru 2007 FLHT & FLHX
740719 Convoy, chrome, 1986 thru 2007 FLHT & FLHX
740724 Convoy, black, 2008 to present FLHT & FLHX
740725 Convoy, chrome, 2008 to present FLHT & FLHX
14
14-029
Handlebars
"ROLAND SANDS DESIGN" FLAT OUT DRAG BARS
Designed by Roland Sands for those with the full throttle syndrome. Bars
are 1" in diameter to accept stock and aftermarket hand controls.
Knurled, slotted and drilled for internal wiring.These drag bars feature
TIG welded integrated risers that are bored 3 1/2" on center with
1/2-13 UNC thread, which allows fitting on most stock Harley
applications from 1974 to present. Matching billet aluminum risers
that lift these bars with 2 1/4" are separately available in chrome or
black powder coated.
End
rise
1 1/2" (3.8 cm)
Width
32" (81 cm)
Center
width
-
Flat-Out
RSD CLIP-ONS
Roland Sands Design clip-on handlebars mount to the front fork below
the top and lower triple clamps for a low handlebar position.They have
a fixed 5 degree down angle and can be used with stock wiring, so no
cutting or soldering is necessary.The aluminum bars are dimple milled
to allow for stock wiring to cleanly exit your stock control switch
housings. Bars are black anodized available with your choice of black,
chrome, or Roland's unique black OPS finished fork clamps. Sold in sets
of left and right.
Fit all 39 mm front fork equipped 1988 to present FXR,
Dyna and Sportster models
740899 All black
740905 Black and chrome
752023 Black OPS
14
14-030
Pull
back
4" (10 cm)
740760 Flat out riser extensions, chrome
740759 Flat out riser extensions, black
Fit all 41 mm front fork equipped Touring, Softail and
Dyna Wide Glide models
752024 All black
752026 Black OPS
Fit all 49 mm front fork equipped V-Rod and Dyna
models
752027 All black
752029 Black OPS
Handlebars
HANDLEBARS AND CONTROLS FOR OLD STYLE
SPRINGER FORKS
Steel old style handlebars for Springer forks.These handlebars are exact
reproductions of the 1936 & 1946 OEM springer handlebars.
Manufactured for internal throttle and ignition cables and are predrilled and tapped for stock style handlebar switches.Available in black
powder coat or chrome finish. Handlebars come in 3 different models,
"Speedster", "Standard", and "Buckhorn.The 1936 model handlebars
will fit the stock style "in-line" Springer forks, as well as our Wide
Springer, found elsewhere in this catalog. The 1946 handlebar will fit
the stock style "off-set" Springer forks.
"Off-set" handlebars
Chrome Black
720103 720106 Speedster, wide 34" (86 cm)
720102 720086 Standard, wide 38" (97 cm)
720104 720088 Buckhorn, wide 36" (92 cm)
14
"In line" handlebars
Chrome Black
720085 720045 Speedster, wide 34" (86 cm)
720105 720100 Standard, wide 38" (97 cm)
720087 720101 Buckhorn, wide 36" (92 cm)
Handlebar parts
720046 Handlebar kit, includes 2 chrome spirals, plunger kits,
nuts, bolts, cables and rubbers
720047 2 Bolts, handlebar (OEM 6033-30 & 4636)
720043 Rubber grip set, Old style, black (OEM 3311-35) (not
shown)
720049 Spiral, chrome push (OEM 3312-35C & 56245-35)
720050 Spiral, chrome pull (OEM 3312-42)
720051 Plunger only (OEM 3316-36 & 56270-36)
720052 Pins, rollers, blocks, 2 sides (OEM 305-15, 3320-10,
3321-31, 3316-36, 9281, 56278-10, 56281-31,
56270-36)
720053 Screw, wire fastening (OEM 3322-31 & 56283-31)
720054 Inner cable, with end (OEM 3326-09 & 56373-09)
720055 Inner and outer cable, throttle and ignition
(OEM 3334-32 & 56502-32)
720027 Lock plate, upper cone nut in-line army green
(OEM 2759-36 & 46550-36)
720028 Lock plate, upper cone nut chrome in-line
(OEM 2759-36C & 46550-36C)
720030 Lock plate, upper cone nut offset chrome
(OEM 2759-46 & 46551-46C)
720044 Nut, cone clamping chrome (OEM 2759-36AC &
46561-36C)
14-031
Handlebar Risers
ONE-PIECE UPPER HANDLEBAR
CLAMPS
These one-piece upper handlebar clamps fit
any Zodiac or OEM two-piece riser set on
1974 to present models with 3 1/2" (89 mm)
center-to-center risers with offset mounting
holes, such as Sportster, Dyna, FX, FXR and
FX Softail models. Does not fit FXLR, Softail
Deuce, Softail Springer, 2007 to present
FXSTC, 1996 to present Sportster Custom.
Note: Handlebar clamps with built-in or bolton speedo or tacho can be found in Chapter
19.
Eagle Spirit
Chrome die-cast upper handlebar clamp
with Eagle Spirit logo in chrome or gold.
241185 Gold/Chrome finish
14
14-032
Live To Ride
Chrome die-cast upper handlebar clamp
with embossed "Live To Ride" logo.
Available with or without a skirt to fill the
front of the risers.
241181 Without skirt
241183 With skirt
Smooth & Skirted
Chrome die-cast upper handlebar clamp,
features a skirt to fill the gap at the front
of the risers.
241167 Smooth & Skirted handlebar
clamp
Scalloped
These unique styled chrome die-cast
upper handlebar clamps are available with
or without a skirt to fill the gap at the
front of the risers.
241189 Without skirt
241191 With skirt
Chrome with straightened front
and control light holes
Chrome plated billet aluminum.
Availabkle with 4 or 5 control light holes
241641
Chrome billet aluminum
with 4 control light holes
241643
Chrome billet aluminum
with 5 control light holes
Billet aluminum with control light
holes
Made by MW from solid billet aluminum
with a high luster polished finish. Has
4 holes ready to take the control lights.
710428 Billet aluminum with control
light holes
Billet aluminum with bracket
recess and control light holes
with a high luster polished finish. Has a
recess and threaded holes in the front to
install MW's meter brackets as found in
Chapter 19 of this catalog. Also features
4 control light holes.
710427 Handlebar clamp with meter
bracket recess and control light
holes
Billet aluminum with bracket
recess
with a high luster polished finish. Has a
recess and threaded holes in the front to
install MW's meter brackets as found in
Chapter 19 of this catalog.
710426 Handlebar clamp with meter
bracket recess
Handlebar Risers
CHROME PLATED EARLY STYLE
RISER CLAMPS
Two-piece riser clamps will fit XLH883,
883 Hugger, and XL1200S models, all FXD,
FXDI, and FXDWG models, and FLSTC, FLSTF,
FLSTN, FXST, FXSTB with 1" handlebars, as
well as most risers with offset mounting
holes. Early style riser clamps are available in
smooth and grooved in your choice of chrome
or black.
FXWG STYLE "STRAIGHT"
HANDLEBAR RISER SET
Chrome plated replicas of the FXWG style
risers with 41/2" (11.5 cm) rise. Can be used
as OEM replacement or Custom applications.
Use in combination with any of our showchromed handlebar clamps. Fits 1"
handlebars, will also fit 7/8" handlebars if
reducer sleeves are used (ZPN242000)
(reducer
sleeves
not
included)
(OEM56063-82A). Use ZPN 233383 riser
bolts.
241164 Riser set straight FXWG
6" PULL BACK RISER SET
Inspired by the stock pull back style risers, but
with their 6" (15 cm) they are just a little
higher. They take all our upper handlebar
clamps with 3 1/2" (89 mm) center-to-center
risers and offset mounting holes, as well as
our Early Style 2-piece top clamps ZPN
241025 and 241026. Risers are sold in pairs
and are threaded for 1/2"-13 UNC riser bolts.
241624 Pull-back riser set, chrome
241625 Pull-back riser set, black
Grooved
241025 Chrome
241725
Black
Smooth
241026 Chrome
241726
Black
CHROME SHORTY HANDLEBAR
RISERS
Beautifully chrome-plated duplicates of the
original parts.Available for all FL models from
late 1970 thru 1984. Risers are 1.70"
(4.30 cm) tall and fit under the handlebar
cover.
241266 Shorty riser FL
(OEM 59940-79 & 59941-79)
NOTE :
A LL
RISERS CAN BE USED
FOR
7/8" (22
PULL BACK RISER SET
Show-chromed die-cast riser set with 4 1/2"
rise (11.5 cm). Replace stock risers on
FXS/FXB models 1977 thru 1981, and
FXST/FXSTC models 1984 to present. Can be
used with stock upper clamp or any Zodiac
clamp. Fits 1" handlebars, will also fit 7/8"
handlebars if reducer sleeves are used (ZPN
242000) Reducer sleeves not included). Use
ZPN 233383 riser
bolts (OEM 56066-82A).
241144 Pull Back riser set
CHROME FORGED ALUMINUM
PULL BACK RISER SET
Forged aluminum risers with a 4 1/2"
(11.5 cm) rise. Legs are not round, as with
the stock pull back style risers, but oval
shaped. They take all our upper handlebar
clamps with 3 1/2" (89 mm) center-to-center
risers and offset mounting holes, as well as
our Early Style 2-piece top clamps ZPN
241025 and 241026.These risers are sold in
pairs with a chrome or black anodize finish
and are threaded for 1/2"-13 UNC riser bolts.
241627 Chrome forged aluminum pull
back riser set
241628 Black forged aluminum pull
back riser set
14
MM )
HANDLEBARS IF REDUCER
SLEEVES
ZPN 24200
USED .
ARE
14-033
Handlebar Risers
CHROME BILLET ALUMINUM
RISERS
Stock style risers machined form solid billet
aluminum with a show-chrome finish. These
risers are available in 5 different heights and
are sold in pairs.
Use ZPN 233383 riser bolts
241020 2" riser set
241021 3 1/2" riser set
241022 4 1/2" riser set
241023 5 1/2" riser set
241024 6 1/2" riser set
CHROME HANDLEBAR RISER AND
CLAMP SETS
Show-chromed die-cast riser and clamp kits.
Replace stock risers on XLmodels from
1974 thru 1978, all Superglide models and
FXR/FXRS 1982 to present.These kits feature
four chrome sockethead mounting screws
and rubber hole plugs. Also usable for many
Custom applications.Available in a straight or
a pullback version. Use ZPN 233383 riser
bolts.
241169 Pullback riser and clamp set
plain
241256 Straight riser and clamp set
plain
BILTWELL STAINLESS STEEL
RISERS
Biltwell's risers are 1 1/4" (32 mm) high and
machined from solid Stainless Steel with a
polished or black finish. Come complete with
stainless Allen head bolts to hold the upper
to the lower clamp. Sold in pairs. Drilled and
tapped for 1/2" UNC riser bolts.
751826 Polished
751827 Black
14
PHAT RISERS
These risers are made of billet aluminum with
show chromed finish. The fat look of these
Phat risers is especially designed to match
with the 1 1/4" thick Phat handlebars but
they work with 1" handlebars too. These
risers are 1 1/4" thick and can be used in
combination with stock or any of our
handlebar clamps. Sold in pairs.
741327 Phat riser, 1 1/2" rise
741328 Phat riser, 4 1/2" rise
741329 Phat pull-back riser, 5 1/2" rise
741330 Phat pull-back riser, 9" rise
CHROME PULLBACK RISER FOR
SOFTAIL MODELS
Chrome 5" long pullback riser kit. This kit is
inspired by the Softail Deuce model and will
fit most 2000 to present Softail models with
1" diameter handlebars. Provides more
comfort to smaller riders. Does not fit Softail
models equipped with Springer forks.
Installation of higher risers may require
replacement of longer brake line and control
cables.
241027 Pullback riser kit
NOTE :
A LL
RISERS CAN BE USED
FOR
7/8" (22
MM )
SLEEVES
14-034
CHROME EURO STYLE RISER SET
These chrome plated Euro-style risers feature
a smooth looking squared design and
grooved details. Risers are 4" high, give an
extra 1" pull back on your handlebars and
come complete with upper handlebar clamps
and Allen head bolts. Sold in pairs.
241528 Chrome Euro style riser set
ZPN 24200
USED .
ARE
BILTWELL DOGBONE RISER TOP
CLAMPS
Biltwell's Dogbone style riser top clamps are,
just like their risers, made from Stainless Steel
and available with a polished or black finish.
The use of a one-piece clamp is strongly
recommended when handlebars with a wire
hole between the risers are used, particularly
in combination with rubber handlebar
damper kits.
751849 Polished
751850 Black
Handlebar Risers
Polished Black
Chrome
746245 746246 746247 TAU riser
set
746330 746331 TAU rigid
mount kit
For 1" handlebars
241594 Chrome with individual top
clamps
241590 Chrome with one-piece top
clamp
241595 Gloss Black with individual top
clamps
241592 Gloss Black with one-piece top
clamp
For 1 1/4" (32 mm) handlebars
241593 Chrome with individual top
clamps
241589 Chrome with one-piece top
clamp
241596 Gloss Black with individual top
clamps
241591 Gloss Black with one-piece top
clamp
REBUFFINI NAUS RISERS
Rebuffini's Naus risers are made for use with
1" handlebars. Risers are CNC machined
from solid billet aluminum with a polished,
black anodized or chrome finish. Feature caps
to hide the handlebar clamp screws for an
undisturbed appearance. Risers are 2" (5 cm)
high and come complete with 1/2-13 x
2-1/2" UNC mounting screws.
746233 Polished
746234 Black anodized
746235 Chrome
NOTE :
A LL
RISERS CAN BE USED
FOR
7/8" (22
MM )
FUSION CHROME BILLET OVAL
HEAD RISERS
These Fusion risers with their symmetric oval
heads feature handlebar top clamps that are
secured from the underside, so clean looking,
as there are no bolt heads in sight. Available
in 2" (5.1 cm) thru 5" (12.7 cm) in 1"
increments. They take almost any of our 1"
handlebars as well as our Phat, Fat Bubba
and Mucho-Fatzo bars. Risers are made from
solid billet aluminum, than polished to
perfection and finished with top quality show
chrome. Three great looking designs to
choose from, Smoothie, Lone Star or
Crossblade design. Riser bolts are not
included but must be ordered separately.
Risers are 1/2"-13 UNC threaded for our ZPN
233383 riser bolts. Risers are sold in pairs.
Smoothie Design
Chrome Black
241060 241072
241063 241075
241066 241078
241069 241081
2" (5.1 cm) high
3" (7.6 cm) high
4" (10.2 cm) high
5" (12.7 cm) high
Lone Star Design
Chorme Black
241061 241073
241064 241076
241067 241079
241070 241082
2" (5.1 cm) high
3" (7.6 cm) high
4" (10.2 cm) high
5" (12.7 cm) high
Crossblade Design
Chrome Black
241062 241074 2" (5.1 cm) high
241065 241077 3" (7.6 cm) high
241068 241080 4" (10.2 cm) high
241071 241083 5" (12.7 cm) high
14
REBUFFINI TAU RISERS
Rebuffini's Tau oval tapered risers show sleek
looking lines as only Italians can create. Risers
are CNC machined from solid billet aluminum
with a polished, black anodized or chrome
finish for use with 1" handlebars. Feature
flawless looking caps to hide the handlebar
clamp screws. Risers are 2 1/4" (5.5 cm) high
and come complete with M12 allen head
mounting screws with tapered sleeves. For
those who want to change from the stock
rubber handlebar mount to rigid mount a
special rigid mount kit is available separately
in black or polished.
FAT BAR RISERS
Fat Bar risers are beefy looking, 5" (12.5 cm)
high billet aluminum in chrome or gloss black
finish. They come complete with the upper
clamps. For those who want an even fatter
look, these risers are also available with a
"dumbbell" style one-piece top clamp for
3 1/2" (89 mm) center-to-center applications.
Risers are available for regular 1" (25.4 mm)
diameter handlebars, as well as for thru-out
1 1/4" (32 mm) diameter handlebars. The
1 1/4" version does not work with 1 1/4"
handlebars with recessed mounts, such as
our "Fat Bubba" and "Phat" bars, these work
with the regular 1" version. Risers are sold
in pairs and come complete with the
necessary hardware.
SLEEVES
ZPN 24200
USED .
ARE
14-035
Handlebar Risers
FUSION CHROME BILLET
TAPERED OVAL HEAD RISERS
These Fusion risers feature tapered oval heads
inspired by classic design. The handlebar top
clamps are smooth looking as they are bolted
out of sight from the underside. Available in
2" (5.1 cm) thru 5" (12.7 cm) in 1"
increments. They take almost any of our 1"
handlebars as well as our Phat, Fat Bubba and
Mucho-Fatzo bars. Risers are made from solid
billet aluminum, than polished to perfection
and finished with top quality show chrome.
Pick the style that matches your bike from the
Smoothie, Lone Star or Crossblade design.
Risers bolts are not included but must be
ordered separately. Risers are 1/2"-13 UNC
threaded for our ZPN 233383 riser bolts.
Risers are sold in pairs.
14
Smoothie design
Chrome Black
241085 241097
241088 732000
241091 732003
241094 732006
Lone Star Design
Chrome Black
241086 241098
241089 732001
241092 732004
241095 241107
2" (5.1 cm) high
3" (7.6 cm) high
4" (10.2 cm) high
5" (12.7 cm) high
2" (5.1 cm) high
3" (7.6 cm) high
4" (10.2 cm) high
5" (12.7 cm) high
Crossblade Design
Chrome Black
241087 241099 2" (5.1 cm) high
241090 732002 3" (7.6 cm) high
241093 732005 4" (10.2 cm) high
241096 241108 5" (12.7 cm) high
FUSION II BILLET "TAPERED OVAL
HEAD" RISERS
Just like our other Fusion risers these ones
also feature tapered oval heads, inspired by
classic design. The handlebar top clamps are
smooth looking as they are bolted out of sight
from the underside. The heads of the Fusion
II risers however are 1 5/8" (41 mm) wide,
where the Fusion I risers are only 1 3/8"
(35 mm) wide. Available in 3" (7.5 cm) and
5" (12.7 cm) height for use with 1"
handlebars, as well as for 1 1/4" (32 mm)
handlebars.The 1" diameter version also fits
our Phat, Fat Bubba and Mucho-Fatzo bars.
Risers are made from solid billet aluminum,
than polished to perfection with a top quality
show chrome or black anodized finish . Riser
bolts are not included but must be ordered
separately. Risers are 1/2"-13 UNC threaded
for our ZPN 233383 riser bolts. Risers are sold
in pairs.
For 1" handlebars
Chrome Black
241045 241057 3" (7.5 cm) high
241046 241058 5" (12.5 cm) high
For 1 1/4" handlebars
Chrome Black
241043 241055 3" (7.5 cm) high
241044 241056 5" (12.5 cm) high
NOTE :
A LL
RISERS CAN BE USED
FOR
SLEEVES
14-036
7/8" (22
MM )
ZPN 24200
USED .
ARE
CUSTOM RISER SET FOR FXSTS
MODELS
This riser set, which was specifically designed
for the Springer Softail, isolates the
handlebars in rubber to minimize vibration,
and raise them approximately 2" above stock
position while moving them 2" closer to the
rider. The set features beautiful chrome
plating and comes complete with all required
mounting hardware. Longer brake lines and
control cables may be necessary when
retaining the OEM Buckhorn handlebars.
241187 Riser set
REBUFFINI NAUS SPRINGER
RISERS
Rebuffini's Naus Springer risers are made for
use with their Taurus billet aluminum top fork
clamp to allow installation of 1" handlebars.
Risers are CNC machined from solid billet
aluminum with a polished, black anodized or
chrome finish. They are 2" (5 cm) high and
come complete with 1/2-13 x 1/2" UNC
mounting screws.
746248 Polished
746250 Chrome
Handlebar Risers
DETONATOR HANDLEBAR RISERS
Sleek looking chrome handlebar risers with a
trick mounted domed top cover to keep the
screws out of sight. Available in 4", 6" and
8" high. Sold in pairs.
241503 4" riser set
241504 6" riser set
241505 8" riser set
BILLET ALUMINUM ROUND TOP
RISERS
Tapered style billet aluminum risers are a
timeless design.They come complete with top
covers and allen head top cover screws.They
are sold in pairs, 2" (5.1 cm) high and
threaded for use with 1/2-20 UNF riser bolts
ZPN 233382.
241028 Polished
241029 Chrome
BILLET ALUMINUM RISER SET
Round top billet aluminum riser set.Available
in both show chromed and polished finish.
3 different lengths to choose from, 4"
(10 cm), 6" (15 cm) and 8" (20 cm) rise. Fits
1" handlebars however will fit 7/8"
handlebars too, when reducer sleeves ZPN
242000 are used. Risers are to be fitted with
ZPN 233382 riser bolts.
Chrome
241012
241013
241014
Polished
241015 Riser set 4" (10 cm)
241016 Riser set 6" (15 cm)
241017 Riser set 8" (20 cm)
DETONATOR RISERS FOR
SPRINGERS
Detonator risers feature a trick mounted
domed top cover to keep the screws out of
sight. They have internal fitted 1/2-20 UNF
allen head screws that bolt straight into the
threaded top tree of 1988 to present Softail
Springers. Risers are sold in sets of 2, have a
show chrome finish and are available in 4"
(10 cm) and 6" (15 cm).
241515 Detonator Springer risers 4"
(10 cm)
241516 Detonator Springer risers 6"
(15 cm)
"HIDDEN MOUNT" FORGED
ALUMINUM RISERS
Chrome plated forged risers. These straight
risers are available in five different lengths
from 2" up to 10". A small but equally
smooth cover hides clamping screws. Provide
a sleek and powerful look. Sold in pairs
241510 2" high
241511 4" high
241512 6" high
241500 8" high
241513 10" high
NOTE :
A LL
RISERS CAN BE USED
FOR
7/8" (22
MM )
SLEEVES
ZPN 24200
USED .
LUCKY SEVEN RISERS
The dice are back! These Lucky Seven risers
are tastefully designed and give a distinct
Custom look. They are machined from billet
aluminum and have a polished finish. The
handlebar top clamps feature hidden-mount
hardware for that sleek look. Lucky Seven
risers are available in 3" and 5" rise, and
match perfectly with other Lucky Seven
accessories found elsewhere in this catalog.
741108 Lucky Seven risers 3"
741109 Lucky Seven risers 5"
14
ARE
14-037
Handlebar Risers
KUSTOM TECH BILLET
ALUMINUM ROUND RISERS
These 1" round handlebar risers are
machined from billet aluminum. Because of
the unique design of the top clamp it
eliminates all the hardware from sight giving
it a very clean look.Available in 3" and 5" rise
with polished or black anodized finish.
741110 3" Polished
741111 3" Black anodized
741112 5" Polished
741113 5" Black anodized
"MAGNUM .38 POLICE SPECIAL"
BILLET ALUMINUM RISERS BY
RBS
For those that want something really special.
These Magnum Police Special risers are
decorated with genuine Magnum cartridge
cases. Risers are manufactured from solid
billet aluminum and available in 2 1/4", 4"
and 6" high. You can have the risers in
chrome or black, but the cartridges stay the
same. Matching handlebar grips, point covers,
SuperTrapp end caps and gas cap covers for
that real "Shooting" finishing touch can be
found elsewhere in this catalog
722260 Chrome 2 1/2" high riser set
722261 Black 2 1/2" high riser set
722262 Chrome 4" high riser set
722263 Black 4" high riser set
722264 Chrome 6" high riser set
722265 Black 6" high riser set
14
MW PAN AM BILLET RISERS
These Pan Am risers are made from billet
aluminum and have a mirror polished finish.
They are only 2 3/8" (60 mm) high and are a
perfect match with MW"s Digital Speedo
clamps found elsewhere in this catalog. Fits
most stock and stock style triple trees with
OEM handlebar dampers.
721879 MW Pan AM aluminum risers
MW BILLET ALUMINUM RISERS
These squared MW risers are CNC machined
from solid blocks of billet aluminum and have
a beautiful polished finish. They slightly pull
back and give a rise of 2 3/8 " (60 mm).
710399 Squared billet aluminum 2 3/8"
high risers
RBS RISER SETS
CNC machined billet aluminum riser sets with
a 2 5/16" rise. Come in three different
finishes, polished, chrome and black
anodized. Made for 1" handlebars. Will also
fit 7/8" handlebars if reducer sleeves (ZPN
242000) are used. Use ZPN 233383 riser
bolts.
700638 Riser set polished
700639 Riser set chrome
700640 Riser set black anodized
CHROME SQUARED BILLET
RISERS
Stock length risers, made from solid billet
aluminum with a show chrome finish. Sold in
pairs. Must be installed with 1/2" UNC riser
bolts (ZPN 233383) which must be ordered
separately. Come complete with reduction
sleeves for use with 5/8" (22 mm)
handlebars.
241018 Chrome billet riser set
NOTE :
A LL
RISERS CAN BE USED
FOR
7/8" (22
MM )
SLEEVES
14-038
ZPN 24200
USED .
ARE
Handlebar Risers
REBUFFINI NAUS HIDDEN WIRE
RISERS
Rebuffini's Naus "hidden wire" risers are
designed to keep the handle bar switch wires
out of sight and give that true Custom look
when used in combination with any of our
1" diameter hidden wire handlebars. Risers
are fitted straight into the top triple tree
without the use of the damper rubbers or with
the stock damper rubbers in conjunction with
the separately available reduction sleeve kit.
Features caps to hide the handlebar clamp
screws for an undisturbed appearance.
Available in 2" (5 cm), 4" (10 cm) and 6"
(15 cm) high with a polished, black anodized
or chrome finish and supplied in pairs.
Polished
746236
746239
746242
Black
746237
746240
746243
"ROLAND SANDS DESIGN"
MOTO-X RISERS
Roland created these risers inspired by
motorcross styling. Risers are made from solid
billet aluminum with a black anodized or
chrome finish. They feature a laser engraved
RSD logo on the top caps. Chrome pinch bolts
are included. Risers are drilled and tapped for
1/2-13 UNC riser bolts, such as ZPN 233383.
Sold in pairs in 1 1/2" (38 mm), 3" (76 mm)
and 5" (127 mm) high.
740753 Black, 1 1/2"
740754 Chrome, 1 1/2"
740755 Black, 3"
740756 Chrome, 3"
740757 Black, 5"
740758 Chrome, 5"
14
Chrome
746238 2" (5 cm)
746241 4" (10 cm)
746244 6" (15 cm)
Reduction sleeve kits
746231 Polished
"ROLAND SANDS DESIGN" FLAT
OUT RISERS
Roland Sands initially designed these risers
for use with his Flat-Out drag bars to allow
installation of these bars on a Softail with
stock gas tank, but found that these can also
be used to offer extra lift to almost any kind
of risers.These risers are CNC machined from
billet aluminum, come with 1/2-13 UNC
mounting hardware and are available in
chrome or black powder coated. Sold in pairs.
740760 Flat out riser extensions,
chrome
740759 Flat ouot riser extensions, black
BILLET ALUMINUM HANDLEBAR
RISERS FOR USE WITH 1 1/2"
HANDLEBARS
Oval shaped, chrome plated billet aluminum
handlebar risers for use with all 1 1/2"
diameter handlebars, such as our MuchoFatzo. Sold in pairs.
741321 Aluminum riser set for use with
1 1/2" handlebars
NOTE :
A LL
SOLID MOUNT HIDDEN WIRE
BILLET ALUMINUM PULL BACK
RISERS
These billet aluminum solid mount "hidden
wire" pull back risers are designed to keep
the handle bar switch wires out of sight and
give that true Custom look when used in
combination with any of our 1" diameter
hidden wire handlebars. Risers are fitted
straight into the top triple tree without the
use of the damper rubbers and come
complete with all necessary hardware. Made
in Germany from solid billet aluminum with
a polished finish these risers are TÜV
approved for the use on any motorcycle.
Available in 2 3/8", 4 3/4" and 6 5/16" high.
731590 2 3/8" (60 mm) high
731591 4 3/4" (120 mm) high
731592 6 5/16" (160 mm) high
RISERS CAN BE USED
FOR
7/8" (22
MM )
SLEEVES
ZPN 24200
USED .
ARE
14-039
Handlebar Risers
FUSION RISER & T-BAR
EXTENSIONS
These billet aluminum extensions are
designed to increase the rise of our Fusion
riser sets, as well as most T-Bar handlebars
and risers that have a 1" or 1 1/4" bottom
diameter. They feature a recess in the top to
hold your risers or T-bars in exactly the right
position and are available in straight or
tapered style. Extended riser bolts must be
ordered separately. Extensions are sold in
sets of 2 with a chrome or black finish.
14
Tapered design
Chrome Black
241759 241760 1/2" high for 1"
risers or handlebars
241762 241763 1" high for 1" risers
or handlebars
241765 241766 1 1/2" high for 1"
241768 241769 1/2" high for 1 1/4"
241771 241772 1" high for 1 1/4"
241774 241775 1 1/2" high for
1 1/4" risers or
handlebars
Straight design
Chrome Black
241777 241778 1/2" high for 1"
241780 241781 1" high for 1" risers
or handlebars
241783 241784 1 1/2" high for 1"
241786 241787 1/2" high for 1 1/4"
241789 241790 1" high for 1 1/4"
241792 241793 1 1/2" high for
1 1/4" risers or
handlebars
Riser bolts (5-packs)
742309 1/2x20x2 1/2" UNF for 1/2"
extensions
742311 1/2x20x3" UNF for 1"
extensions
742313 1/2x20x3 1/2" UNF for 1 1/2"
extensions
742288 1/2x13x2 1/2" UNC for 1/2"
extensions
742290 1/2x13x3" UNC for 1"
extensions
742292 1/2x13x3 1/2" UNC for 1 1/2"
extensions
CYCLE KRAFT SLOTTED RISER
SETS
Cycle Kraft slotted riser sets are CNC
machined from solid aluminum by Ken's
Factory.Available in 2" (5 cm), 4" (10 cm), 6"
(15 cm) and 8" (20 cm) height in a polished
finish or black anodized with clear cuts.They
feature top end caps to keep the top
mounting bolts out of sight and take ZPN
233383 1/2-20x2" UNC riser bolts. Risers are
sold in pairs.
Black
747214
747216
747217
747218
Classic Line Risers
Chrome Brass
Black
743360 743364 743368
743361 743365 743369
743362 743366 -
Height
2" (5.1 cm)
4" (10.2 cm)
16"
(15.2 cm)
743363 743367 743371 8" (20.3 cm)
Polished
747215 2" (5 cm)
747219 4" (10 cm)
747220 6" (15 cm)
747221 8" (20 cm)
NOTE :
A LL
RISERS CAN BE USED
FOR
7/8" (22
MM )
SLEEVES
14-040
CHOPS 76 RISERS
Chops 76 offers a complete range of "Old
School" motorcycle products, including these
risers.All products are designed and made in
Italy from top quality materials on CNC
equipment, your guarantee for state-of-the
art products that meet the highest quality
standards. Make your choice from the Classic, Cone-, Tower- and Shaved Line in a length
that suits your custom or chopper project.
Besides the wide variety of lengths and
finishes, you also have the option to change
the looks of your risers with one of the
interchangeable top cover kits. Risers and top
covers are sold in pairs. All risers are drilled
and tapped for use with M12 riser bolts.
ZPN 24200
USED .
ARE
Cone Line Risers
Chrome Black
743372 743373 743374 743377
Height
2" (5.1 cm)
4" (10.2 cm)
6" (15.2 cm)
Handlebar Risers/Handlebar Riser Mounts
Shaved Line Risers
Chrome Black
Height
743384 2" (5.1 cm)
743385 743388 4" (10.2 cm)
743386 743389 6" (15.2 cm)
Interchangeable top covers
Chrome Black
743393 743390 Coned-line
743394 743391 Shaved-line
743395 743392 Tower-line
SOLID-MOUNT HANDLEBAR KIT
This solid damper set is specially designed for
use with high bars and/or risers. Fits all Big
Twin and Sportster models from 1973 to
present with rubber handlebar bushings.
Make the handling of your bike more positive.
Made from Heavy-Duty nylon.
358268 Solid-mount handlebar kit
MACHINED NYLON HANDLEBAR
DAMPER KIT
Machined nylon handlebar dampers, ideal for
use with extremely high handlebars and/or
risers. Fits all models 1973 to present except
FLT/FLH & Springer models.
358277 Machined nylon handlebar
damper kit
HANDLEBAR DAMPER KIT
Improved handlebar mounting kit, fits all
models 1973 to present. Dampers are made
from Heavy-Duty rubber, comes complete
with heat-treated steel bushing and a choice
of zinc plated or show-chromed top/bottom
washers (OEM 56153-73).
358254 With zinc plated washers
358267 With chrome plated washers
HEAVY-DUTY POLYURETHANE
HANDLEBAR DAMPER KIT
Polyurethane handlebar dampers provide
excellent vibration damping without the
mushy feel of rubber dampers.This complete
kit contains 2 upper and 2 lower dampers in
your choice of red or black, 2 inner sleeves
and 4 chrome washers. Fits most models
1973 to present (OEM 56157-85T).
358272 Red damper kit
358273 Black damper kit
14
Tower Line Risers
Chrome Black
Height
743378 743381 2" (5.1 cm)
743379 743382 4" (10.2 cm)
743380 743383 6" (15.2 cm)
REDUCTION SLEEVES
Reduces your 1" (25 mm) riser or lever
assembly to 7/8" (22 mm). Specially knurled
to prevent slipping. Sold and packed per
4 pcs.
242000 Reduction Sleeves
14-041
Handlebar Riser Mounts/Handlebar Parts
NESS POLYURETHANE
HANDLEBAR DAMPER KITS FOR
BAGGER MODELS
• A must when installing Ape Hanger
handlebars on a Bagger
• Ness polyurethane bushings add more
positive feel to the handlebars while limiting
vibrations
• Ness heavy-duty chrome cup washers will
not bend or distort like factory units
• Kits include polyurethane bushings, inner
sleeves and heavy-duty chrome cup
washers
• Fits 1984 to present FLH and FLT series
Touring models
A08029 Ness handlebar damper kit for
Baggers
14
14-042
NESS FLUSH MOUNT
POLYURETHANE HANDLEBAR
BUSHING KITS WITH BUILT-IN
RISE
• Clean flush mount design
• Beautifully polished 303 stainless steel
custom washers
• Soft polyurethane bushings absorb
vibration
• Available with fine or course Allen hardware
• Fits 1973 and later FX, FXR, Softail and
Dyna, as well as 1973 thru 2003 Sportster
and most custom triple tree applications
• The cleanest way to raise your handlebars
an extra inch (2.5 cm)
A08014 1" rise flush mount kit, fine
thread applications
A08018 1" rise flush mount kit, course
thread applications
FLUSH MOUNT HANDLEBAR
DAMPER KIT
For extra clean looks of your handlebar
mount.These chrome handlebar damper kits
feature flush mounted 1/2-13 X 2 1/4" UNC
Allen head bolts, black rubber bushings and
chrome washers. Fits all Sportster and Big
Twin models 1973 to present (except
Springers). Sold in kits of 2.
358112 Flush mount bushing kit
CHROME PLATED FLUSH MOUNT
RISER BOLT KITS
Flush mount riser bolt, fit all stock 1973 to
present and many aftermarket risers. Kits
available for either 1/2"-13 UNC or 1/2"20 UNF internal threaded risers. Kits include
a pair of 2 1/2" long chrome plated Allen
head bolts and chrome plated washers. Use
in combination handlebar dampers kits ZPN
358254, ZPN 358267, ZPN 358272 or ZPN
358273. Handlebar dampers kits are sold
separately.
345004 Flush mount riser bolt kit 1/2"13 UNC
345005 Flush mount riser bolt kit 1/2"20 UNF
TRANSPARANT HANDLEBAR
DAMPER KIT
This damper kit features a new one-piece
chrome cap and insert design and transparent
polyurethane dampers for a stiffer mounting
than the stock rubber dampers. Fits all models
1973 to present except FLT/FLH & Springer
models
358276 Transparent handlebar damper
kit
SOLID-MOUNT HANDLEBAR KITS
These kits eliminate rubbermounted
handlebars and fit either aluminum or steel
fork crowns. Easy to install and highly
recommended when installing high bars
and/or risers.
233486 Fits all Big Twin and Sportster
models from 1973 to present
with rubber handlebar bushings
233487 Fits all Big Twin and Sportster
models thru 1972 with steel
press-fit bushings
HANDLEBAR DAMPENER KITS
WITH STUDS
Handlebar dampener kits for late model Big
Twins and Sportsters with threaded risers. Kits
come complete with four rubber dampeners,
two studs (1/2" x 13) and top and bottom
washers. Fits FXR models 1984 thru
1994
(except
FXRT/FXRD),
FXSB/FXEF/-FLST(C) 1985, FLSTF models
1987 to present and Sportster models late
1984 to present (OEM 56105-84 &
56159-73 & 53156-86 & 56158-73).
358087 Handlebar dampener kits with
studs
CHROME PLATED RISER BOLT
233383 Riser bolt UNC 1/2"x2"
233382 Riser bolt UNF 1/2" x 2"
Handlebar Parts
RISER ADAPTER STUDS FOR FXST
SPRINGER MODELS
These chrome plated riser adapter studs are
designed for use on 1988 and later FXST
Springer models, including 2008 and later
Cross Bones. Feature 1/2-12 UNC thread on
one side and 5/8-20 UNF thread on the other
end. Can also be used on some aftermarket
Springer front ends. Sold in pairs.
241520 Springer riser adapter studs
(OEM 4554-88)
ZODIAC'S INTERNAL THROTTLE
CONTROL
This internal throttle control allows you to
route the throttle cable inside the handlebars
for those classic, naked looks as found on
Flatheads and Liberators. It is an easy bolton construction in to your handlebar. Fits all
1" diameter handlebars. Must be used with
a left side OEM or aftermarket grip.
052017 Internal throttle control
TWISTGRIP STYLE INTERNAL
CLUTCH CONTROL
The internal throttle control is back again, in
particular for customizers that want a clean
looking handlebar. For those in search of even
cleaner looks we now have a matching
twistgrip style internal clutch control kit.You
will have to cut your handlebar and drill and
tap 3 holes to install. Works with Custom
made clutch cables. The inner grip rolls on
two needle bearings, whilst the plunger
features a very small roller bearing, all in order
to get a very smooth operation. Has 1"
(25.4 mm) outer diameter and will accept
stock size grips.
052019 Twistgrip style internal clutch
control kit
CHROME THROTTLE ASSY DUAL
CABLE
Chrome plated throttle assembly fits all
1982 up models with dual cable. Includes grip
set (OEM 56392-77 & 56395-81).
052041 Chrome throttle assy dual cable
KUSTOM TECH INTERNAL
THROTTLE CONTROL
You want that naked look and get rid of that
big mess of cables dangling round your
handlebar? Try this one, a smoothly designed
internal throttle control that allows you to
route the throttle cable inside the handlebars.
Kustom Tech's internal throttle control is a
steel construction with bronze and teflon
internal components for a smooth action.
Internal pull control can be used with all
carburetor applications. Easy screw-on
mounting, but for a very clean look you can
also weld it to your handlebar. Must be used
with a left side OEM or aftermarket grip.
741107 Kustom Tech internal
CHROME THROTTLE ASSEMBLY
SINGLE CABLE
Show-chrome throttle assy fits FL/FLH
1975-1980 and FX/XL 1974 thru
1980 (OEM 56500-79). Single cable only.
052039 Throttle assy with grip set
052009 Throttle assy without grip set
BILTWELL WHISKEY THROTTLE
ASSEMBLY
The Biltwell Whiskey throttle is constructed
of CNC-machined 6061 T-6 aluminum and
fits all 1" (25.4 mm) diameter handlebars.
Two sets of four different cable ferrules are
included with each full assembly.These plated
steel ferrules fit both threaded and click-in
barrel ends on stock Harley cables. If you
don't run stock H-D cables on your
motorcycle, the supplied ferrules provide
plenty of options for custom single- or
double-cable assembly. Like most Biltwell
products, the Whiskey throttle should be
installed by competent home mechanics or
experienced professionals. Available with
polished or black housing. Throttle sleeve is
available separately as well.
751846 Black
751847 Polished
751848 Replacement trhrottle sleeve
14
14-043
Handlebar Parts/Grip Sets
HANDLEBAR VIBRATION
DAMPERS
No matter what style of handlebar is chosen,
they will vibrate. Sometimes on wide
handlebars to the extent of being painfull.
We have a simple and very economical
solution: a set of our handlebar vibration
dampers.These vibration dampers will reduce
or neutralize these unpleasant vibrations.
They are very easy to install, just remove your
grips, slide them into the
handlebar end, secure the bolt and install
your grips again. Now you can enjoy a more
comfortable ride. Fits almost any 1" diameter
handlebar and are sold in pairs.
735004 Handlebar vibration dampers
14
14-044
NESS ROLLER THROTTLE
BEARING
• Turning your throttle has never been easier
or smoother
• Design allows your factory throttle sleeve
to ride on a roller bearing instead of
dragging on your handlebar
• Cable style, fit all 1976 to present models
with single throttle cable or dual
throttle/idle cables, except models with
handlebar air reservoirs
Note: Requires cutting 1/2" (13 mm) from
the right side of your handlebar
A07099 Ness roller bearing throttle kit
"HOG-CRUISE" THROTTLE
RETURN THUMBSCREW
Cad plated, steel throttle return adjusting
screw. Fits 1974 and later throttles as well as
any Zodiac throttle. Thumb-wheel has 1"
diameter which allows far easier adjustment
and release with gloves on. Complete with
spring and instructions. USA made.
232317 Cruise control "HOG CRUISE"
"JACKHAMMER" CHROME
PLATED THROTTLE ASSEMBLY
Universal throttle assembly for use with single
cable carburetors.Available for 7/8" (22 mm)
and 1" (25 mm) handlebars. All metal
housing and twist grip with black rubber
throttle sleeves.
351200 Complete assembly 7/8"
052020 Complete assembly 1"
351203 Grip set only
THROTTLE SLEEVES
This is something you won't find in a Harley
parts catalog. Throttle sleeves for use with
single throttle cable as found on most models
thru 1980, or, what is commonly known as
"dual throttle" but in fact for throttle and
return (idle) cable as found on most models
1981 to present.
052032 Sleeve for single throttle cable
052030 Sleeve for dual throttle cable
TWO CABLE THROTTLE SLEEVE
WITH GRIPS
Replacement throttle and grip set for all
models with Push-Pull dual throttle cables
1981 to present. Set contains throttle sleeve,
left and right grip (OEM 56220-81B and
5620681A).
052028 Two cable throttle sleeve with
grips
REPLACEMENT GRIP SET
Replacement gripset for all Harley models
1973 to present (OEM 56205-62A).
052038 Replacement grip set
SOFT TOUCH GRIP SET
The finest on the market. Features embossed
V-Twin Eagle emblem. The perfectly sized
rubber sleeve is covered in neoprene rubber
to absorb vibration and stop finger "Tingles".
Fits all models 1973 to present (except with
handlebar air reservoir).
351434 Grip set with embossed V-Twin
Eagle logo
Grip Sets
SUNDANCE SOFT TOUCH GRIP
SET FOR HARLEY-DAVIDSON
This grip set feature improved "close cell"
grip rubbers which don't absorb water, oil etc.
but still absorb vibration and stop finger
"Tingles". Fits all Harley models 1973 up
(except with handlebar air reservoir).
351519 Sundance grip set with plain
chrome end caps
OLD SKOOL RUBBER GRIPS
The design of these rubber hand grips with
their chrome accent is inspired by the Old
Skool look of the 1940's.Two styles available
in order to match perfectly with the switch
housings on your bike. Sold in pairs for left
and right. Fit all V-Rod, Sportster and Big Twin
models with single or dual cable operated
throttle.
351396 Fits with 1982 thru 1995 switch
housings
351394 Fits with 1996 to present style
switch housings
OLD SKOOL METAL FLAKE GRIP
SETS
These metal flake handlebar grips look good
and stay good looking for many years
because of modern materials. Old Skool
chopper looks are available in 4 colors. Sold
in sets of left and right.
Note: Throttle sleeve not included, you may
use your stock sleeve or order one separately.
745300 Blue metal flake
745301 Red metal flake
745302 Clear metal flake
745303 Black metal flake
LEATHER SUNDANCE SOFT
TOUCH GRIPS
The Soft Touch rubber on these grips absorbs
a lot of vibration and puts a hold to finger
tingles and is also covered with genuine black
leather. These grips have a larger outer
diameter as most other grips on the market,
which makes them ideal for the big handed.
Throttle side fits on the stock plastic throttle
sleeve. Grips feature chrome end caps and
are sold in pairs.
351081 Leather Sundance Soft Touch
grip set
THROTTLE PIPE AND GRIP SET
Dual throttle cable pipes complete with grips
and chrome-plated end caps. Fits all models
from 1981 to present.
052067 Throttle pipe and grip set
BILTWELL KUNG-FU GRIPS
The people at Biltwell Inc. believe motorcycle
grips should be simple and comfortable.These
BMX-inspired units are exactly that. Thick
ends are durable, small flanges are attractive
and a million little rubber fins are comfy. Grips
are sold in pairs to fit all 1" (25.4 mm)
diameter handlebars in your choice of black
or natural rubber.
751844 Black rubber
751845 Natural brown rubber
SOFT TOUCH GRIPS WITH FRINGE
These additions to our extensive line of
handlebar grips provide the same levels of
comfort as our other soft touch grip sets, but
with the added styling accent of chrome
plated and fringed end caps. They fit all
models from 1973 and later.
351524 Soft Touch Grips with fringe
CHROME PLATED FLAT BAND
STYLE GRIP SETS
CNC machined aluminum grip sets with
rubber flat bands to absorb vibration and to
stop "finger tingles". Fits all models 1972 to
present with either single or dual cable
throttle.
351350 Flat band style grip set
14
14-045
Grip Sets
14
14-046
VINTAGE STYLE SOFT GRIPS
Vintage style soft grip sets give your bike the
real "Old School" look. Grips fit most OEM or
aftermarket throttle housings and are
available for dual cable (push/pull) or internal
throttle. If a throttle housing or internal
throttle control is needed, they must be
ordered separately.
351125 Black grips fit dual throttle
housing
351126 White grips fit dual throttle
housing
351127 Red grips fit dual throttle
housing
351128 Black grips fit internal throttle
control
351129 White grips fit internal throttle
control
351130 Red grips fit internal throttle
control
J.B. ISO STYLE HANDLEBAR GRIP
SET
High-tech aluminum grip set with dual cable
factory throttle sleeve and flat thick rubber
O-rings to absorb vibration and stop "finger
tingles". Will accept both single or dual
cables. Fits all Harley-Davidson models
1972to present. Usable for Custom
applications.
351452 JB ISO style alu grip set with
rubbers
J.B. STYLE ALUMINUM GRIP SETS
These grip sets are a perfect match with our
line of J.B. style foot pegs and available for
dual cable or single cable application. Sold in
sets.
351537 Fits single cable
351535 Fits dual cable
O-RING HANDLEBAR GRIP SET
Custom style O-ring grip set, fits most makes
and models with 7/8" or 1" handlebar.A real
show item, has chrome finish.
351347 Fits 7/8" handlebars/ throttles
351525 Fits 1" handlebars/throttles
STREAMLINER GRIP SET
Another addition to our extensive line of grip
sets. These Streamliner grip sets feature a
thick one piece rubber inside to absorb
vibration and are covered by a sleeved
chrome plated cover to add a touch of beauty.
Grip sets are available for 7/8" and 1"
controls (22 and 25 mm).
351445 Fits 1" handlebars
351447 Fits 7/8" handlebars
STREAMLINER II GRIP SET FOR
1996 TO PRESENT MODELS
Updated version of our popular Streamliner
grip set. As with the OEM grips, the left side
grip is secured inside the handlebar switch
housing. The right side grip comes with the
nylon throttle sleeve installed. Fits all 1996 to
present models. Sold in pairs.
351324 Streamliner II grip set
GLADIATOR GRIP SET
Machined from billet aluminum with a
chrome finish.The rubber wrapping provides
a non-slip surface and a more comfortable
ride. Fits all 1973 to present models with
single or dual cables, except those with
handlebar air reservoir.
351135 Gladiator grip set
EAGLE'S HEAD HANDLEBAR GRIP
SET
Another addition to our extensive line of grip
sets. These grip sets feature a one piece
rubber in combination with a sleeved chrome
plated cover with the addition of an Eagle's
Head at the end caps. Fits 1" handlebars.
310214 Eagle's Head grip set
Grip Sets
SWIRL STYLE GRIP SET
This Swirl style grip set features a thick one
piece rubber inside to absorb vibrations and
are covered by a grooved chrome plated cover
to add a touch of beauty. Comes with the
nylon sleeve for single or dual cable
applications already installed. Fits all models
1973 to present (except models with
handlebar air reservoir).
351116 Swirl style grip set
TORNADO II GRIP SET
Tornado II handlebar grips are a design version of the popular Tornado grips. Like the Tornado
grips, these are machined from billet aluminum with a chrome finish.They feature rubber wrapping
with protruding stars, crosses or checkers that provide extra comfort and a non-slip grip.The end
caps feature the same star or cross design, or are smooth. Available for all 1973 to present
models with single or dual throttle cables, except those with handlebar air reservoir.Also available
for 2008 to present Touring models with "fly-by-wire" throttle control. Matching Tornado II
footrests, shifter pegs and brake pegs can be found in Chapter 13.
DIAMOND GRIP SET
In addition to our range of our Diamond foot
pegs, we also offer this grip set in the same
design for the finishing touch. Features thick
one piece rubbers inside to absorb vibrations
and brightly chromed sleeves.
351528 Diamond grips
Fits 2008 to present Touring models with "fly-by-wire" throttle control
351812 Chrome, Four Cross Design with black rubbers
351813 Black, Four Cross Design with black rubbers
351802 Chrome, Lone Star Design with black rubbers
351803 Black, Lone Star Design with black rubbers
351822 Chrome, Smooth Design with black rubbers
351823 Black, Smooth Design with black rubbers
351113
Bronzed, Smooth Design with black rubbers
351946
Chrome, Turbo Design with black rubbers
351986
Chrome, Turbo Design with grey rubbers
351947
Black, Turbo Design with black rubbers
351987
Black, Turbo Design with grey rubbers
351948
Bronze, Turbo Design with black rubbers
351988
Bronze, Turbo Design with grey rubbers
14
TORNADO GRIP SET
Machined from billet aluminum with a
chrome finish.The rubber wrapping provides
a non-slip surface and a more comfortable
ride. Fits all 1973 to present models, except
those with handlebar air reservoir.
351120 Chrome / rubber CNC Tornado
grip set
Fits 1973 to present cable operated models
351810 Chrome, Four Cross Design with black rubbers
351811 Black, Four Cross Design with black rubbers
351800 Chrome, Lone Star Design with black rubbers
351801 Black, Lone Star Design with black rubbers
351820 Chrome, Smooth Design with black rubbers
351821 Black, Smooth Design with black rubbers
351112
Bronze, Smooth Design with black rubbers
351942
Chrome, Turbo Design with black rubbers
351982
Chrome, Turbo Design with grey rubbers
351943
Black, Turbo Design with black rubbers
351983
Black, Turbo Design with grey rubbers
351944
Bronze, Turbo Design with black rubbers
351984
Bronze, Turbo Design with grey rubbers
14-047
Grip Sets
RUBBER GRIPS WITH CHROME
FLAMES
The rubber on these awesome looking grips
protrude through the chrome flames to give
a very good grip. Available to fit all 1973 to
present Harleys with single or dual cable
operated throttle, except those with
handlebar air reservoirs. Also available for
2008 and later "Fly-By-Wire" equipped
Touring models. Sold in pairs.
351079 Fits all 1973 to present models
with cable operated throttle
351080 Fits all 2008 to present Touring
models and other "Fly-ByWire" equipped models
14
14-048
RETRO STYLE KNURLED BILLET
ALUMINUM GRIP SETS
The "Retro" design originates from the drag
race strip where drivers need all grip they can
get, both on the tarmac as well on handlebars
and foot pegs. Matching foot,- brake,- and
shifter pegs can be found in Chapter 13.
"Retro" grips fit all Harley models with single
or dual throttle cable from 1973 to present,
except those with handlebar air reservoirs.
Available in plain aluminum, chrome, bronze
anodized or black anodized with clear
highlights.
353000 Bronze
353003 Black with clear aluminum
highlights
353006 Chrome
353009 Plain aluminum
LION'S HEAD HANDLEBAR GRIP
SET
Beauty and comfort are joined together in
these grips.The thick one piece rubber inside
the grips absorbs the vibrations and the
beautifully chromed sleeved cover features a
Lion's Head at the end cap for that touch of
class. Grips fit 1" handlebars.
310215 Lion's Head grip set
INLAY MILLENNIUM GRIP SET
Fat looking and sensational feeling grips for
your Harley. Features a one-piece rubber
insert that protrudes through the chrome
plated housing to absorb vibration. The
throttle side grip comes with the nylon sleeve
for single or dual cable application allready
installed. Fits all models 1973 to present
(except models with handlebar air reservoir).
351114 Inlay Millennium grip set
PRO-ONE "MILLENNIUM" BILLET
GRIPS
Pro-One's "Millennium" billet grips feature
a hot design. Made from chrome plated billet
aluminum, they fit all models 1982 to present
except those with air reservoir in handlebar.
Sold in pairs.
710886 Millennium billet grips
SPEEDLINE GRIP SET
This grip set is an updated version of our very
popular Streamliner grip set. Like the
Streamliner set they also feature a thick one
piece rubber inside and are covered by a
sleeved chrome plated cover.We have added
the grooved end caps for extra class.This grip
set really adds something special to your bike.
Fits 1" handlebars.
351451 Speedline grooved grip set
SPEEDLINE II GRIP SETS
Sleek looking grip sets that fit all models
1973 to present with single or dual cable
operated throttle (except models with
handlebar air reservoir). These grips have
rubber inlays that protrude trhrough the
chrome plated housing to absorb vibrations.
Available with 6 rail "wide band" rubber
inserts or 8 rail "narrow band" inserts.
351215 With 6 railed wide band inserts
351216 With 8 railed narrow band
inserts
REVOLUTION BILLET ALUMINUM
GRIP SET
High-tech billet aluminum grip set with
knurled pattern. Not only looks great but also
provides a non-slip surface. Fits all models
Harley-Davidson 1973 to present. In
combination with ZPN 052041 or
052009 usable for many Custom applications
on 1" handlebars.
235899 Billet aluminium grip set
Grip Sets
Rubber,
Engraved, Dimpled Rubber, black
A07088 Cable style
A07089 Throttle-by-wire
Scalloped Dimpled Rubber, black
A07084 Cable style
Smooth, Dimpled Rubber, chrome
A07090 Cable style
Scalloped Dimpled
chrome
A07082 Cable style
Scalloped Knurled, chrome
A07070 Cable style
Scalloped Knurled, black
A07071 Cable style
14
Engraved, Dimpled
chrome
A07086 Cable style
Rubber,
Smooth, Dimpled Rubber, black
A07092 Cable style
NESS SOFT TOUCH BILLET GRIPS
• These premium hand grips look and feel
great
• Made in the USA from the finest materials
such as Kraton rubber and billet aluminum
collars and end caps
• Throttle sleeve included
• Cable style grips fit all 1976 to present
models with single throttle cable or dual
• Throttle-by-wire style grips fit 2008 to
present FLH and FLT series Touring models
14-049
Grip Sets
ARLEN NESS BILLET GRIPS
Ness was the first billet grip
manufacturer on the motorcycle industry
• Cable style grips feature Ness exclusive
internal roller bearing that eliminates any
free play for smooth throttle operation
• Arlen
Diamond Flatband, chrome
A07275 Cable style
A07112 Replacement rubbers
Flamed, black
A07142 Cable style
Cable Type cutaway
Throttle-by-wire cutaway
Rocket, chrome
A07144 Cable style
14
14-050
Knurled Flare Tip, chrome
A07109 Cable style
Deep Cut, chrome
A07130 Cable style
Retro, chrome
A07145 Cable style
Twister, chrome
A07136 Cable style
Deep Cut, black
A07132 Cable style
Flamed, chrome
A07103 Cable style
Grooved, black
A07147 Cable style
Diamond Twist, chrome
A07139 Cable style
Grip Sets
Knurled, chrome
A07102 Cable style
Battistini Oval, black
A07149 Cable style
Battistini Round, black
A07146 Cable style
NESS ALTERNATIVE BILLET GRIPS
• Machined from 6061-T6 billet aluminum
and chrome plated
Torpedo, chrome
Battistini Oval, chrome
A07141 Cable style
14
Flatband, chrome
A07111 Cable style
Battistini Round, chrome
A07138 Cable style
Ten-Band, chrome
A07143 Cable style
NESS GRIP WING
• Design adds support to the palm of your
hand
• Can be used on throttle and clutch side
• Increases leverage when used on the
throttle side
• Chrome finish
• Installs in minutes
A07200 Ness Grip Wing
Horizontal, chrome
A07133 Cable style
Grooved, chrome
A07107 Cable style
14-051
Grip Sets
14
14-052
ARLEN NESS FUSION GRIPS
•The perfect fusion of grip, style and comfort
•Each rubber grip design features excellent
traction for your hands to take full control of
your motorcycle
•Billet aluminum accents are finished in high
luster chrome or black anodizing
•Deep Cut, Port Hole and Smoothie designs
feature 1 1/4" billet aluminum inner collars,
diamond knurled rubber grips and billet
aluminum end caps
•Slot Track design features 1 1/4" billet
aluminum inner collars with an air cushion
rubber thumb pad, linear knurled rubber grips
and slotted billet aluminum end caps
•Diamond Knurled Rubber design features
diamond knurled grips with integrated billet
end caps for a clean design
•Ring Leader design features a linear knurled
rubber grip with integrated air pillows for
comfort. Collars, rings and end caps are
machined from billet aluminum
•All kits include an installed throttle sleeve,
grip glue and simple to follow instructions
•Part numbers indicated as "cable" fit all
models with single throttle or dual throttle
and idle cable, except those with handlebar
mounted air reservoirs
•Part numbers indicated as "Fly-By-Wire" fit
all 2008 to present FLH and FLT series Touring
models and selected CVO models
•Matching foot pegs and shifter pegs can be
found in Chapter 13
A07305 Port Hole, black, cable
A07307 Port Hole, black, Fly-By-Wire
A07312 Ring Leader, chrome, cable
A07313 Ring Leader, black, cable
A07314 Ring Leader, chrome, Fly-ByWire
A07315 Ring Leader, black, Fly-By-Wire
A07316
A07317
A07318
A07319
A07300
A07301
A07302
A07303
Slot Track, chrome, cable
Slot Track, black, cable
Slot Track, chrome, Fly-By-Wire
Slot Track, black, Fly-By-Wire
Deep Cut, chrome, cable
Deep Cut, black, cable
Deep Cut, chrome, Fly-By-Wire
Deep Cut, black, Fly-By-Wire
A07324
A07325
A07326
A07327
Knurled, chrome, cable
Knurled, black, cable
Knurled, chrome, Fly-By-Wire
Knurled, black, Fly-By-Wire
A07320
A07321
A07322
A07323
Smoothie, chrome, cable
Smoothie, black, cable
Smoothie, chrome, Fly-By-Wire
Smoothie, black, Fly-By-Wire
Grip Sets
CYCLE KRAFT
NEO FUSION GRIP SETS
Cycle Kraft Neo Fusion grip sets are CNC
machined by Ken's Factory from billet
aluminum and have a larger outer diameter
as most other grips on the market. Available
in two designs, in a polished finish or black
anodized with clear cuts.All versions feature
brass end caps. Available for most Harley
models 1976 to present with single throttle
cable or combined throttle and idle cables,
as well as for 2008 "throttle by wire" Touring
models 2008 to present.
Classic
747207 Cable style, polished
747211 Throttle By Wire, polished
747206 Cable style, black anodized with
clear cuts
747210 Throttle By Wire, black anodized
with clear cuts
747201 Dimpled, polished
747203 Dimpled, black anodized with
clear cuts
747202 Ribbed, polished
747205 Ribbed, black anodized with
clear cuts
Spiral
747209 Cable style, polished
747213 Throttle By Wire, polished
747208 Cable style, black anodized with
clear cuts
747212 Throttle By Wire, black anodized
with clear cuts
PM CONTOUR RENTHAL
WRAPPED GRIPS
Most people tend to overlook the grips used
on their motorbike. But they can be a real eyecatcher, especially if they are as beautiful as
the Contour series by Performance Machine.
The rubber wrapping absorbs engine
vibrations and provides you with a more
secure grip particularly in bad weather
conditions. A perfect fit when matched with
the PM Contour handlebar controls found
elsewhere in this catalog.
723199 PM Contour renthal wrapped
grips, chrome
724199
PM Contour renthal
wrapped grips, black
14
CYCLE KRAFT GRIP SETS
Cycle Kraft grip sets are CNC machined by
Ken's Factory from billet aluminum and
available in three designs in a polished finish
or black anodized with clear cuts. Fits most
Harley models 1976 to present with single
throttle cable or combined throttle and idle
cables.
747200 Spiral, polished
747204 Spiral, black anodized with
clear cuts
14-053
Grip Sets
CHROME ALUMINUM BARREL
STYLE GRIPS
Barrel style grips with deep grooves look
good and provide a lot of grip. Fits all 1973 to
present Harleys with single or dual cable
operated throttle, except those with
handlebar air reservoirs. Also does not work
on 2008 and later "Fly-By-Wire" equipped
Touring models. CNC machined aluminum
with a top of the bill chrome finish.
351422 Chrome aluminum barrel style
grip set
CHROME BILLET MIAMI GRIPS
Miami grips are a spectacular looking yet
ergonomically design, CNC machined from
solid billet aluminum with a chrome finish.
Grips have knurled parts for a firm handgrip.
Fits all Harley models 1976 to present, except
those with handlebar air reservoirs nor
2008 and later FLH and FLT series models.
Sold in pairs.
351414 Chrome billet Miami grip set
CHROME BILLET ROCKET STYLE
GRIPS
Rocket style grips machined from billet
aluminum, mirror shine polished and showchrome finish. Fits all models from 1982 to
present (except those with handlebar air
reservoir).
361130 Chrome billet Rocket Style grip
set
14
14-054
CHROME ALUMINUM V-GROOVE
GRIPS
The deep V-shaped grooves in these grips not
only look good, they also provide a very good
grip. Fits all 1973 to present Harleys with
single or dual cable operated throttle, except
those with handlebar air reservoirs.Also does
not work on 2008 and later "Fly-By-Wire"
equipped Touring models. CNC machined
aluminum with a perfect chrome finish.
351424 Chrome aluminum barrel style
grip set
MAGNUM GRIP SETS
Magnum grips are machined from billet
aluminum and than chrome plated or black
anodized. They feature rubber bands that
provide extra comfort and a non-slip grip to
your gloves. They are available for use with
single throttle or throttle/idle cable
combinations, but won't fit models with
handlebar mounted air reservoirs. A version
for "Fly-By-Wire" models, such as 2008 to
present Touring models and 2011 to present
Softail CVO models also available.
Magnum grip sets for cable
applications
351920 Chrome
Magnum grip sets for "Fly-ByWire" applications
351928 Chrome
CHOPS 76 GRIP SETS
Chops 76 grips are designed and made in
Italy.They are CNC machined from solid billet
aluminum or pure solid brass. Billet aluminum
grips come in chrome or black anodized, with
or without highlighted accents.The pure solid
brass version has a high luster polished finish.
Grips are sold in pairs. Throttle sleeve is not
included. You can re-use the one from your
stock grips, but it might be a pain to remove
it. New ones are available from Zodiac (ZPN
052028). Grips are not suitable for models
with handlebar air reservoirs or 2008 to
present Touring models.
743424 Chrome billet aluminum
743425 Black anodized billet aluminum
743426 Black anodized and highlighted
billet aluminum
743427 Polished brass
Grip Sets
REBUFFINI GRIP SETS
These billet aluminum grip sets feature rubber
inlays to provide a good grip and reduce
vibrations. Work with Rebuffini, stock, and
stock style throttle housings. Cable style grips
are designed for throttle and idle cables as
used on most 1982 to present models, the
"Fly-By-Wire" style is for use on 2008 to
present Touring models. Two designs
available.The Delta style grips in black feature
the Rebuffini Cycles script on the end.
PAUL YAFFE'S BAGGER NATION
ALI-BABA GRIPS
Paul Yaffe's exclusive urethane compound
brings unparalleled pleasure to your ride.
Perfect fit, perfect length, perfect feel. AliBaba handlebar grips feature removable end
caps that make your handlebars a really cool
place to stash your registration or whatever
you feel like hiding. Handlebar grips fit all
models with cable operated throttle 1982 to
present, except those with handlebar air
reservoirs. Matching Ali-Baba foot pegs and
shifter pegs are also available.
745018 Ali-Baba rubber handlebar
grips, fit all models with cable
operated throttle 1982 to
present, except those with
handlebar air reservoirs.
745019 Ali-Baba male mount rubber
pegs
745020 Ali-Baba shifter peg
CLASSIC GRIPS
Paul Yaffe's exclusive top-secret urethane
compound brings unparalleled pleasure to
your ride. Perfect fit, perfect length, perfect
feel. Feature removable end caps that make
your handlebars a really cool place to stash
your registration or whatever you feel like
hiding. Handlebar grips fit all models with
cable operated throttle 1982 to present,
except those with handlebar air reservoirs.
Matching Classic foot pegs and shifter pegs
are also available.
745021 Classic rubber handlebar grips,
fit all models with cable
745022 Classic male mount rubber pegs
745023 Classic shifter peg
Delta design
Cable style Fly By Wire style
746228
746762 Polished
746229
746763 Black
746230
746764 Chrome
Omega design
Cable style Fly By Wire style
746225
746765 Polished
746226
746766 Black
746227
746767 Chrome
14
BULLET GRIPS
Paul Yaffe's exclusive urethane compound
brings unparalleled pleasure to your ride.
Perfect fit, perfect length, perfect feel. Feature
removable end caps that make your
handlebars a really cool place to stash your
registration or whatever you feel like hiding.
Handlebar grips fit all models with cable
operated throttle 1982 to present, except
those with handlebar air reservoirs. Matching
Bullet foot pegs and shifter pegs are also
available.
745015 Bullet rubber handlebar grips,
fit all models with cable
745016 Bullet male mount rubber pegs
745017 Bullet shifter peg
14-055
Grip Sets
RSD TRACKER GRIPS
Roland Sands Design grips are CNC machined
from solid billet aluminum or brass. They are
wrapped with genuine Renthal rubber to
ensure that your hand never slips off no
matter how hard you twist the throttle.
Feature Speed Dots and a RSD laser engraved
logo.Available in chrome, Contrast Cut black,
"Black-OPS"; Roland Sands' top-secret
proprietary two-tone black finish, or pure
brass.
14
14-056
Fits all 1982 to present models
with single or dual throttle cables
740700 Contrast Cut black
740701 Chrome
740916 Black OPS
740892
Brass
Fits 2008 to present Touring
models with Fly By Wire electronic
throttle control
740702 Contrast Cust black
740703 Chrome
740917
Black OPS
740893
Brass
RSD CHRONO GRIPS
Time is on your side with the RSD Chrono line.
Inspired by unique time pieces, the Chrono
line offers a high level of detailing and design.
They are CNC machined from billet aluminum
and feature Renthal rubber grips and material
interchangeable black & brass RSD badges
with a laser engraved logo.
Fits all Harley models with dual or
single throttle cable, except those
with handlebar air reservoirs
751967 Black OPS
751965 Contrast Cut
751966 Chrome
751971 Brass
Fits all FLH and FLT series Touring
and other models with "Fly-ByWire" throttle control
751970 Black OPS
751968 Contrast Cut
751969 Chrome
751972 Brass
CHROME GROOVED GRIP SETS
Machined from solid billet aluminum with ball
milled grooves and a perfect chrome finish.
Fits all models with single or dual throttle
cables from 1982 to present, except those
with air reservoir in the handlebars.
351471 Chrome billet grooved grip set
KUSTOM TECH SUPER SMOOTH
GRIPS
Super Smooth grips provide that Super Sleek
looks to your bike. Machined by Kustom Tech
from billet aluminum. Available with ball or
acorn end in polished or black anodized
finish. Fits all models 1982 to present, except
those with ar reservoir in the handlebars.
Note: Not for use with Kustom Tech internal
throttle housing.
741124 Super smooth grips, ball end
polished
741125 Super smooth grips, ball end
black anodized
741126 Super smooth grips, acorn end
polished
741127 Super smooth grips, acorn end
black anodized
Grip Sets
KUSTOM TECH HANDLEBAR
SMOOTH GRIPS
A very nice looking set of grip it is. Made from
billet aluminum, fits all models with single or
dual cables (except air forks). Choose from
polished or black finish.
throttle housing.
741120 Smooth grip ball end polish
741121 Smooth grip ball end black
anodized
741122 Smooth acorn end polished
741123 Smooth grip acorn end black
anodized
KUSTOM TECH VINTAGE
HANDLEBAR GRIPS
Made in Italy by Kustom Tech. Machined from
billet aluminum and solid brass. A perfect
match with Kustom Tech's DeLuxe handlebar
controls, but also works with stock and most
aftermarket throttle housings. Fits all 1976 to
present Harley-Davidson models with 1"
handlebars and single throttle cable, or dual
throttle-and-idle cable. Does not fit models
with handlebar mounted air reservoirs.
751190 Polished aluminum with
polished brass accents
751191 Black coated aluminum with
polished brass accents
"THE FACTORY" CAST BRASS OR
ALUMINUM HANDLEBAR GRIPS
Hand cast by "The Factory" these solid brass
or solid aluminum handlebar grips fit all
1973 to present models with single or dual
cable operated throttle, except those with
handlebar air reservoirs. Great classic looks,
certainly in combination with other
traditionally cast covers from "The Factory"
found elsewhere in this catalog. Must be used
with a throttle sleeve (sold separately).
735462
"The Factory" cast brass
handlebar grip set
735489
"The Factory" cast
aluminum handlebar grip set
KUSTOM TECH BILLET
ALUMINUM CHOPPER GRIPS
Kustom Tech's handlebar grips fit all models
from 1982 to present, except those with an
air reservoir in the handlebar.These grips are
CNC machined from solid billet aluminum
and come with Ball End, or Acorn End design.
Both versions can be ordered with polished
or black anodized finish.
throttle housing.
741116 Ball-end style, polished
741117 Ball-end style, black anodized
741118 Acorn end style, polished
741119 Acorn end style, black anodized
FABRIC TAPE HANDLEBAR GRIPS
Nostalgic looking handlebar grips covered
with fabric tape. Made from billet aluminum
featuring a polished finish and come with
polished brass end caps. Fits most single and
dual cable applications. Sold in sets of left
and right.
751192 Kustom Tech fabric tape
handlebar grip set
"MAGNUM .38 POLICE SPECIAL"
BILLET ALUMINUM GRIP SETS BY
RBS
For those that want something really special.
These Magnum Police Special grip sets are
decorated with genuine Magnum cartridge
cases. Grips are manufactured from billet
aluminum and will fit all models 1982 to
present except those with fork air reservoirs
in the handlebar.You can have the grip set in
chrome or black, but the cartridges stay the
same. Matching handlebar risers, point
covers, end caps for SuperTrapp and gas cap
covers for that real "Shooting" finishing
touch can be found elsewhere in this catalog.
722272 Polished .38 Special grip set
722273 Black .38 Special grip set
14
14-057
Grip Sets
RBS GRIP SET FOR USE WITH
KELLERMANN TURNSIGNALS
Manufactured from billet aluminum. Four
designs available in chrome plated, polished,
or black finish. Grips feature open ends to
accommodate for Kellermann handlebar
mounted turn signals found elsewhere in this
catalog (turn signals not included).
RBS BILLET HANDLEBAR GRIP
SETS
RBS "Flowing Wave" handlebar grip sets are
machined out of billet aluminum. Fit all
models 1973 to present with single or dual
throttle cables.A perfect match with RBS foot
and shifter pegs.
700620 Polished finish
700621 Black anodized finish
V-Style
signals
722489
722490
722491
grip set with LED turn
Polished aluminum
Chrome plated
Black coated
Standard Style
722473 Polished
722474 Chrome
722475 Black
Twister-style grip set with LED
turn signals
722492 Polished aluminum
722493 Chrome plated
722494 Black coated
14
14-058
RBS GRIPSETS WITH
TURNSIGNALS
Manufactured by RBS from billet aluminum.
These stylish handlebar grips feature state of
the art bright shining "Built-In" turn signals
with LED lights. Fits all models 1973 to
present except those with handlebar air
reservoirs. They come in four different styles
and are available in polished aluminum,
chrome plated or black coated.
V-Style
722476 Polished
722477 Chrome
722478 Black
Grooved-style grip set with LED
turn signals
722497 Black coated
Twister Style
722479 Polished
722498 Chrome
722499 Black
Standard grip set with LED turn
signals
722488 Black coated
Grooved Style
722500 Polished
722501 Chrome
722502 Black
Grip Sets/Hand Shifter Ornaments
RBS BILLET DESIGN SERIES
HANDLEBAR GRIP SETS
RBS "Design Series" handlebar grip sets are
machined out of billet aluminum. Available
in three different designs in your choice of
polished or black anodized. Fit all models
1973 to present with single or dual throttle
cables, except those with handlebar mounted
fork air reservoir. A perfect match with RBS
foot and shifter pegs.
Grooved Style
722281 Polished
722282 Black
HEATED HAND GRIPS
Keeps your hands warm and comfortable
when the weather turns cold. Warm hands
have a major impact on overall comfort and
safety, and as we all know gloves sometimes
are not enough. This self-containing
handlebar grip set features a chrome
weatherproof heat control switch built into
the left grip, 3 level heat control, soft grip
rubber for a comfortable ride, hidden wires
between left and right, as well as chrome end
caps for the finishing touch. Comes pre wired
and is easy to install on V-Rod, Sportster, Dyna
and Softail models to present, as well as FLH
& FLT Touring models thru 2007.
722383 Heated hand grips
RSD BILLET HANDLEBAR END
PLUGS
Exactly the same plugs as supplied with most
Roland Sands Design handlebars. Made from
billet aluminum.Available Natural or chrome
plated. Sold in packs of 4.
740706 Handlebar end plugs, natural
aluminum, 4-pack
740707 Handlebar end plugs, Chrome,
4-pack
V-Style
722283 Polished
722284 Black
CHROME HANDLEBAR END PLUG
Chrome 15/16" punch in plugs for HarleyDavidson grips 1960 thru early 1983. Fits
25/32" diameter holes. Sold in 10 packs
(OEM 56238-62).
052016 Chrome handlebar end plug
Twister Style
722285 Polished
722286 Black
"THE FACTORY" CAST SHIFTER
ORNAMENTS
Hand cast from brass or aluminum by "The
Factory" using traditional casting methods.
Originally designed as a knob for hand shift
models, but nobody is keeping you from
putting it somewhere else on your bike. Heads
are approx. 3 3/4" (9.5 cm) high and have a
threaded hole at the bottom. Great vintage
looks that can be combined with other cast
brass covers from "The Factory" found
elsewhere in this catalog. Heads are, like
almost any part from "The Factory",
attractively packed in a true Old Skool
wooden box.
735464 Frankenhead, brass
735491 Frankenhead, aluminum
735466 Virgin Mary, brass
735493 Virgin Mary, aluminum
735469 Jaws, brass
735496 Jaws, aluminum
14
14-059
Lever Blades
SHOW-CHROMED LEVER
ASSEMBLY
Available with or without cable adjuster. Can
be used as clutch lever, also usable as brake
lever for cable operated front brakes. Fits 1"
handlebars, will also fit 7/8" handlebars
when reducer sleeves are used (ZPN 242000).
053023 Lever assy with 5/16" cable
hole, fits FL 1965 thru
1967 (OEM 45002-65A)
053032 Lever assy with 3/8" cable hole,
fits Sportster 1965 thru
1970 (OEM 38604-65A)
053042 Lever assy with cable adjuster
LATE MODEL LEVER BLADES
Solid, strong aluminum lever blades. These
"Easy to Pull" replacement levers fit all Harley
models 1982 thru 1992.Available your choice
of chrome plated aluminum or polished
aluminum.
Clutch lever (OEM 45062-82T)
053041 Polished
Brake lever (OEM 45064-82T)
053028 Polished
14
14-060
PIVOT PIN AND BUSHING SET
Clutch and brake lever pivot pin. Fits Sportster
1965 thru 1981 and Big Twins clutch levers
1968 thru 1981. Also fits Sportster brake
levers 1965 thru 1972, FL 1968 thru
1971
and
FX
1971
thru
1972 (OEM 45036-68 & 45039-68).
053015 Pivot pin and bushing set
BRAKE AND CLUTCH LEVERS
These brake and clutch levers have an extra
wide lever blade for the ultimate grip.
Available individually and in sets.
REPLACEMENT LEVER BLADES
Chrome plated replacement levers for Harley
FL/FX/XL models 1965 thru 1981.
053019 Clutch and drum brake lever
(OEM 45080-83T)
053020 Disc brake lever
(OEM 45082-83T)
REPLACEMENT NYLON PIN
Replacement nylon pin eyelet style for
1988 to present models.
114540 Nylon pin for eyelet style cable
(OEM 45036-88)
Fits 1993 thru 1995 Sportster,
Softail, Dyna, and Touring models
051254 Brake lever, chrome
(OEM 45016-93)
051255 Brake & clutch lever set, chrome
Fits 1996 thru 2003 Sportster
models, 1996 to present Softail
and Dyna, and 1996 thru
2007 Touring models
053104 Brake lever, chrome
(OEM 45016-96)
053120
Brake & clutch lever set,
black (OEM 44994-07)
POWER LEVER BLADES FOR
EARLY MODELS
Chrome plated levers with power leverage
design and comfort grip. Fits Harley models
1965 thru 1981.
053018 Clutch and drum brake lever
(OEM 45017-69T)
053017 Disc brake lever
(OEM 45016-73T)
PIVOT PIN WITH CLIP
Replacement pin and clip for our lever
assembly. Fits most models 1965 thru 1987.
(OEM 45031-65 & 11036)
051200 Pivot pin with clip
Lever Blades
Brake levers
053644 Fits 2006 to present V-Rod and
2008 to present Touring
models, chrome
(OEM 42860-06B)
2008 to present Touring
models, black
(OEM 42860-06B)
Clutch levers
053645 Fits 2008 to present Touring
models with cable clutch,
chrome (OEM 45015-08)
models with cable clutch, black
(OEM 45015-08)
Touring models with hydraulic
clutch, chrome
(OEM 42876-06A)
Touring models with hydraulic
clutch, black (OEM 42876-06A)
Clutch and brake lever sets
053503 Fits 2004 to present Sportster,
black (OEM 46944-07)
models with cable clutch,
chrome (OEM 38843-08)
models with cable clutch, black
(OEM 38845-08)
CHROME PLATED "STEALTH
STYLE" CLUTCH & BRAKE LEVERS
These chrome die-cast levers will add the
finishing touch to your 1982 thru
1995 Harley-Davidson motorcycle. They are
sold separately. Clutch lever comes with antirattle clip and lever pivot bushings.
053037 Clutch lever (OEM 45062-82T)
053045 Brake lever (OEM 45064-82T)
"WIDE" BRAKE AND CLUTCH
LEVERS
They may look exactly the same as the
OEM lever blades but you will notice the
difference when you fit them. These "Wide"
levers are an ergonomic design with
smoothed edges and approximately
10 degrees rotated blades, which permits
them to fit the hands with more comfort.
These lever blades are chrome plated die-cast
aluminum and come with the latest style
spiral pivot bushings and an anti-rattle clip
for the clutch lever.
Fits 1982 thru 1995 Big Twin and
Sportster models
053066 Brake and clutch lever set
053065 Brake lever only
053064 Clutch lever only
"ANTI-RATTLE" CONTROL LEVERS
These clutch and brake lever sets feature an
anti-rattle clip on the clutch lever.Available for
all Big Twin (including Twin Cams) and
Sportster models 1996 to present with cable
operated clutch. Sold in sets of brake & clutch
lever.
053501 Chrome, fits 2004 to present
Sportster models
(OEM 44992-07)
053503
Fits 2004 to present
Sportster, black
(OEM 46944-07)
053502 Chrome, fits 1996 thru
2003 Sportster models, 1996 to
present Softail & Dyna, and
1996-2007 Touring models
(OEM 45075-07)
053902
Black, fits 1996 thru
2003 Sportster models, 1996 to
present Softail & Dyna, and
1996-2007 Touring models
(OEM 45075-07)
Fits 1996 thru 2003 Sportster
models, 1996 to present Softail &
Dyna, and 1996-2007 Touring
models
"BAD TO THE BONES" STEALTH
STYLE CLUTCH AND BRAKE
LEVERS
Another addition to our line of skull-mania
products.These brake and clutch levers have
a three dimensional skull on the end for that
real "Bad to the Bones" look and are
available with plain or red colored eyes. Fits
all
models
from
1982
thru
1995 (OEM 45062-82T & 45064-82T).
053077 Clutch plain eyes
053078 Brake plain eyes
053080 Clutch Red eye
053079 Brake Red eyes
14
BRAKE AND CLUTCH LEVERS FOR
TOURING AND V-ROD
Stock replacement brake and clutch levers in
chrome or black.
14-061
Lever Blades
ROLAND SANDS AVENGER
LEVERS
Race-styled stock replacement levers add an
aggressive look to your OEM controls. Levers
are CNC machined from billet aluminum and
are a direct bolt-on to stock controls.
Fits 2008 to present FLH and FLT
series Touring models
Set brake & clutch
751958 Black OPS
751956 Contrast Cut
751957 Chrome
14
14-062
Fits 1996 thru 1999 Big Twin,
1999 thru 2007 Touring, 1999 to
present Softail, 1999 to present
Dyna
and
1996
thru
2003 Sportster
Set brake & clutch
751964 Black OPS
751962 Contrast Cut
751963 Chrome
Fits 2004 to present XL Sportster
Set brake & clutch
751961 Black OPS
751959 Contrast Cut
751960 Chrome
ROLAND SANDS AVENGER INLAY
LEVERS
All the clean style of the Avenger levers with
the added comfort of a soft touch rubber inlay
for long days of heavy clutch pulls and quick
stops. Levers are CNC machined from billet
aluminum and are a direct bolt-on to stock
controls.
Fits 2008 to present FLH and FLT
series Touring models
Set brake & clutch
751949 Black OPS
751947 Contrast Cut
751948 Chrome
Fits 1996 thru 1999 Big Twin,
1999 thru 2007 Touring, 1999 to
present Softail, 1999 to present
Dyna and 1996 thru
2003 Sportster
Set brake & clutch
751955 Black OPS
751953 Contrast Cut
751954 Chrome
Fits 2004 to present XL Sportster
Set brake & clutch
751952 Black OPS
751950 Contrast Cut
751951 Chrome
RSD REGULATOR LEVERS
All the clean style of the Avenger levers with
the added comfort of a soft touch rubber inlay
for long days of heavy clutch pulls and quick
stops. These race inspired levers are not only
stylish stock replacements, but customizable
for any size mitt. Enjoy the comfort of
adjustability and a wide finger pull area on
the RSD Regulator Lever. CNC machined from
billet aluminum and feature a laser-engraved
RSD logo.
Fits all 1996 to present Softail and
Dyna, 1996 thru 2007 Touring and
1996 thru 2003 Sportster
751946 Black OPS
751944 Contrast Cut
751945 Chrome
Fits all 2004 to present Sportster
751943 Black OPS
751941 Contrast Cut
751942 Chrome
Fits all 2008 to present Touring
with cable operated clutch
751940 Black OPS
751938 Contrast Cut
751939 Chrome
Handlebar Controls
Complete set
231999 For single and dual disc models
Replacement parts
148027 Master cylinder assembly (OEM 45010-73)
027512 Master cylinder gasket (OEM 45012-72)
231995 Clutch lever bracket (OEM 38608-73)
231997 Vertical switch housing (OEM 71539-73B)
241253 Horizontal switch housing (OEM 71539-72)
148015 Mastercylinder repair kit
722380 Replacement master cylinder cap with gasket
(OEM 45057-72)
Accessories
231994 Switch housing plain, designed for use when switches
are relocated for a clean custom appearance
233302 10-24 x 1/4" allen head screws (10 pack)
Complete sets left and right side
053111 With 3/4" (.750" bore master cylinder for all dual disc
models from 1982 thru 1983
053112 With 5/8" (.625" bore master cylinder for all single disc
models from 1984 to present
053113 With 11/16" (.687" bore master cylinder for all dual disc
models (except those with radio controls) from 1984 to
present
Complete master cylinders
144027 Master cylinder 3/4" bore (OEM 45013-82)
Rebuild kits and parts, fits OEM and aftermarket
master cylinders
144224 Rebuild kit, fits master cylinder with 3/4" diameter bore
(ZPN 053057) 1982 thru 1983 double disc models
(ZPN 053060) 1984 thru 1995 single disc models
144228 Rebuild kit, fits master cylinder with 11/16" diameter
bore (ZPN 053061) 1984 thru 1995 double disc models
053009 Brake/clutch lever clamp (OEM 45044-82)
053053 Clutch lever assembly (OEM 38608-82 & 45017-82A)
114540 Nylon pin for eyelet style cable (OEM 45036-88)
232708 Gasket front brake cylinder (OEM 45012-82)
Chrome-plated switch housings
370122 Left top (OEM 71567-82)
370124 Left bottom (OEM 71568-82A)
370123 Right top (OEM 71564-82)
370125 Right bottom (OEM 71563-82A)
CHROME BANJO BOLTS AND WASHERS
Replacement banjo bolts for Zodiac and Original Equipment handlebar
master cylinders and calipers.Available for most models from 1982 to
present. Sold each.
292203 Fits Zodiac and OEM brake calipers and master cylinders
with 10 mm brake line banjo fittings
292214 Fits Zodiac and OEM master cylinder with 12 mm brake
line banjo fittings
14
CHROME HANDLEBAR CONTROLS FOR 1972 THRU
1981 MODELS
Complete chromed handlebar master cylinder and clutch lever bracket
fits Sportster and FX models 1973 thru 1981 and FL models 1972 thru
1981. Handlebar master cylinder assembly includes brake lever, Custom
master cylinder cover, brake line fitting, stoplight switch and all other
inside components. Switch housings take both OEM and Zodiac rocker
and button switches.
CHROME HANDLEBAR CONTROLS FOR 1982 THRU
1995 MODELS
Chrome handlebar mounted brake and clutch control assemblies with
switch housing for 1982 thru 1995 models. Switch housings will accept
the OEM or OEM styled aftermarket switches. The master cylinder
assembly comes complete with handlebar clamp, chrome mounting
hardware and a banjo bolt. All parts are separately available.
14-063
Handlebar Controls
CHROME "WIDE" LEVER HANDLEBAR CONTROL KITS
Chrome handlebar mounted brake & clutch control kits with switch
housings and ergonomically designed levers for 1982 thru 1995 models.
These lever blades may look exactly the same as the OEM part, but you
will notice the difference when you fit them. "Wide" levers are an
ergonomic design with smoothed edges and approximately 10? rotated
blades providing a superior and more comfortable grip. Switch housings
accept the OEM or aftermarket switches and wiring. These handlebar
control kits are chrome plated diecast aluminum and fit both Sportster
and Big Twin models.Available in different plunger diameters for single
or dual disc applications. Levers and rebuild kits are separately available.
Complete kits
053116 With 3/4" bore master cylinder, fits 1982 thru 1983 dual
disc brake models
053117 With 5/8" bore master cylinder, fits 1982 thru
1995 single disc brake models
053118 With 11/16" bore master cylinder, fits 1984 thru
1995 dual disc brake models
14
Individual parts
(ZPN 053057) 1982 thru 1983 double disc models
(ZPN 053060) 1984 thru 1995 single disc models
144228 Rebuild kit, fits master cylinder with 11/16" diameter
bore (ZPN 053061) 1984 thru 1995 double disc models
114540 Nylon pin for eyelet style cable (OEM 45036-88)
NOTE: T HE
NEW DOT 4 ( AS USED IN THE LATE
H ARLEY-D AVIDSON ) CAN BE MIXED
WITH THE OLD DOT 4 WITHOUT ANY PROBLEM ,
EVEN WITH THE OLDER DOT 3. T HE NEW DOT
4 CAN NOT BE MIXED WITH DOT 5.
DOT 5 IS A S ILICON BASED FLUID THAT HAS
ITS OWN FORMULA . T HIS ALSO MEANS THAT
DOT 4 CAN NOT BE USED IN A SYSTEM THAT
HAS BEEN ON DOT 5 ( AND VICE VERSA )
MODELS
UNLESS THE WHOLE SYSTEM HAS BEEN TAKEN
APART AND CLEANED . I T ALSO NEEDS NEW
SEALS AND CUPS BEFORE THE
USED .
C LEANING
DOT 4
CAN BE
THE PARTS WITH CLOTH OR
PAPER IS ALSO NO OPTION , THE PARTS HAVE TO
BE VERY WELL CLEANED WITH BRAKE CLEANER !!
(ZPN 235213
14-064
OR SIMILAR ).
CHROME HANDLEBAR CONTROL KITS
Complete chrome plated handlebar control kit to fit the 1996 to present
Big-Twin and 1996 thru 2003 Sportster models. Comes complete with
switch housings. Housings accept OEM and OEM style aftermarket
switches. All hardware needed is included. Available with 9/16" bore
Master cylinder for Single disc models and 11/16" for Dual disc models.
The handlebar switch housings are a chrome plated reproduction of the
Original Equipment housings and will accept both OEM or aftermarket
switches. All parts in these kits are available separately.
Complete sets
054002 With 11/16" Master cylinder for double disc models
054003 With 9/16" Master cylinder for single disc model
Master cylinders only
236232 11/16" Master cylinder only (OEM 45072-96)
236233 9/16" Master cylinder only (OEM 45006-96)
Chrome switch housing kit, left and right side. Also
usable as OEM replacement
054001 Early style, fits 2002 thru 2006 V-Rod models and
1996 thru 2006 Sportster, Dyna, Softail (except
FXSTDSE) and FLHR Road King (except FLHRSEI) models
(OEM 70222-96)
Master cylinder repair kits (also fit OEM master
cylinder), fits 9/16" bore master cylinder for single
disc on 1996 to present Big Twin and Twin Cam models
and 1996 thru 2003 Sportster (OEM 45006-96)
144125 Fits 9/16" bore
236234 Japanese import
cylinder), fits 11/16" bore master cylinder for dual
disc on 1996 thru 2005 Big Twin and Twin Cam models,
2002 thru 2005 V-Rod and 1996 thru 2003 Sportster
(OEM 45072-96)
144131 Fits 11/16" bore
Replacement parts
053104 Brake lever, chrome (OEM 45016-96)
358058 Top cover gasket
Handlebar Controls
FITTING MASTER CYLINDER
Fits front brake hose to master cylinder and can be used for Custom fit
to rear brake "T".
233410 Straight fitting (OEM 63609-72)
BANJO BOLT SEAL WASHER
This unique seal washer features a soft metal washer with vulcanized
viton O-ring. Usable as replacement for all 3/8" and 10 mm banjo seal
washers. Sold in 10 packs (OEM 41731-82).
348014 3/8" (10 mm) aluminum with Viton insert, 10 pack
Complete handlebar control kit for 2007 thru 2010 Softail, 2007 thru
2011 Dyna and 2007 to present V-Rod. A perfect reproduction of the
OEM parts, but with a chrome finish. Can also be used for 1996 and
later Sportster and 1996 thru 2006 V-Rod, Softail, Dyna and Road King
but note that the left switch housing has a provision for the Clutch
Interlocking Switch as introduced on the 2007 models. Comes complete
with switch housings that accept original and original style aftermarket
switches. All hardware needed is included. Available with 9/16" bore
Master cylinder for Single disc models with cable or hydraulic operated
clutch, as well as 11/16" for Dual disc models with hydraulic operated
clutch.
Complete sets
053266 With 9/16" Master cylinder for single disc models and
cable operated clutch
053268 With 9/16" Master cylinder for single disc models and
hydraulic clutch
053267 With 11/16" Master cylinder for dual disc models and
hydraulic clutch
Complete handlebar control kit for 2007 to present Sportster models.
A perfect reproduction of the Original Equipm-ent parts, but with a
chrome finish. Comes complete with switch housings that accept
OEM and OEM style aftermarket switches. All hardware needed is
included.Available with 1/2" bore master cylinder for Single disc models
and 9/16" for Dual disc models.
Complete sets
053263 With 1/2" Master cylinder for single disc models
053262 With 9/16" Master cylinder for dual disc model
Master cylinder rebuild kits
144291
For 1/2" bore
144292
For 9/16" bore
NOTE: T HE
MODELS
USED .
C LEANING
DOT 4
CAN BE
14
(ZPN 235213
OR SIMILAR ).
14-065
Handlebar Controls
CHROME HANDLEBAR CONTROLS FOR TOURING
MODELS
Very complete kit to replace those dull black handlebar controls on all
2008 to present Touring models with cable operated clutch. Kit includes
complete clutch lever assembly and 15 mm bore front brake master
cylinder for use with the stock Brembo brake calipers on ABS and nonABS equipped models, as well as left and right side switch housings
prepared for Cruise Control and Audio Control switches.
053630 Chrome handlebar control kit
cylinder)
144125 Fits 9/16" bore
144134 Fits 5/8" bore
144131 Fits 11/16" bore
14
14-066
CUSTOM STYLE HANDLEBAR CONTROL KITS
Custom-styled chrome plated handlebar control kit. Re-styled from the
OEM controls as used on 1996 to present Big Twin and Sportster
models. Kits contain complete front brake master cylinder, clutch lever
with perch, left and right side switch housings, and all required
hardware.Available with 9/16" and 5/8" bore master cylinder for single
disc models, and 11/16" bore for dual disc models.The switch housings
are a reproduction of the OEM housings, but with a show chrome
quality finish. Switch housings accept both OEM and aftermarket
switches for 1996 to present Sportster and 1996 thru 2006 Softail and
Dyna.
053133 With 9/16" bore master cylinder
STOCK STYLE HYDRAULIC CLUTCH MASTER
CYLINDER
Chrome plated, restyled version of the hydraulic clutch master cylinder
as found on the 2001 and later V-Rod. Has 11/16" bore. The design
matches perfectly with the hydraulic brake master cylinder as used on
1996 to present Big Twin and Sportster, so great for those who want
to change the stock cable clutch into a smooth hydraulic operated
clutch. Comes with 3/8" chrome 12-point banjo-bolt and seal washers.
Hydraulic operated clutch release systems can be found in Chapter 8 of
this catalog.
Note: Will accept 1996 to present brake master cylinder caps and
gasket (OEM 38657-01A).
053137 Chrome clutch master cylinder
053123 Replacement clutch lever
NOTE: T HE
MODELS
USED .
C LEANING
DOT 4
CAN BE
(ZPN 235213
OR SIMILAR ).
Handlebar Controls
STOCK STYLE HANDLEBAR KIT WITH HYDRAULIC
CLUTCH MASTER CILINDER
Restyled from the OEM controls as used on 1996-2006 Big Twin, and
1996 thru 2003 Sportster models. Both master cylinders have more
fluent lines, making them more looking like one part with the switch
housings.The included switch housings are show-chromed replica's of
the OEM parts and accept OEM and aftermarket switches. Front brake
master cylinder features 9/16" bore for use with single disc brake
calipers.
053146 Handlebar kit with hydraulic clutch master cylinder
053123 Replacement clutch lever
236235 Rebuild kit for clutch master cylinder
CHROME GROOVED MASTER CYLINDER COVER 1996
STYLE
Replaces the black cover of the OEM front brake master cylinder, will
also fit the clutch master cylinder on models equipped with a stock
style hydraulic clutch master cylinder. Comes complete with mounting
screws. Fits Evolution Big Twins 1996 thru 1999, and Sportster models
1996 thru 2003 (OEM 45004-96A).
144258 Chrome grooved master cylinder cover
ZODIAC'S CUSTOM
PRODUCTS BILLET
ALUMINUM HANDLEBAR
CONTROL
Not just another custom product
but a high quality custom
handlebar control kit that can
compete on the market. There are
more on the market but none of
them offer such a high quality in
design and finish for such an
affordable price. CNC machined
from solid billet aluminum with a tribal engraved in the master cylinder
top cover these controls do very well on any custom bike. Kits come
complete with handlebar brake master cylinder, clutch lever assembly
for cable operated clutch or handlebar clutch master cylinder and push
button switches. Brake master cylinders are 5/8" bore, a bore size that
works well with most single and dual disc brakes. Clutch master
cylinders are 9/16" bore, a bore size that works well with most hydraulic
clutch slave cylinders. Kits are available in high luster polished, black
coated or chrome plated.
Kits for cable operated clutch
053528 Polished
053530 Black
053532 Chrome
Kits for hydraulic operated clutch
053527 Polished
053529 Black
053531 Chrome
Replacement parts
053280 Banjo bolt with adapter sleeve
055400 Cable clutch lever, polished
055404 Cable clutch lever, black
055402 Cable clutch lever, chrome
055401 Brake or clutch lever, hydraulic, polished
055405 Brake or clutch lever, hydraulic, black
055403 Brake or clutch lever, hydraulic, chrome
055406 Rebuild kit for 5/8" bore brake master cylinder
055407 Rebuild kit for 9/16" bore clutch master cylinder
055408 Pivot pin for cable clutch lever
055409 Pivot pin for hydraulic brake or clutch lever
370314 Push button switch
14
CUSTOM STYLE HANDLEBAR CONTROL KIT
Styled after the handlebar controls as used on 1996 thru 2006 Big Twin
and Sportster models, we designed these Custom style controls. Both
the front brake master cylinder and clutch lever have more fluent lines,
making them more looking like one part with the switch housings.
Available with 9/16" bore master cylinder for use with single disc brake
calipers. Switch housings are a show chromed reproduction of the
OEM housings, and accept both OEM and aftermarket switches
054012 Chrome handlebar control kit
14-067
Handlebar Controls
HYDRAULIC CLUTCH CONVERSION KITS FOR 1996 TO
PRESENT SPORTSTER
Complete handle bar control kits for all 1996 to present Sportster
models to convert from your stock cable operated clutch into an easy
to operate hydraulic clutch. Hydraulic operated clutches require 30%
less effort compared to cable operated clutches. Kits contain brake
master cylinder, clutch master cylinder, hydraulic clutch line, clutch slave
cylinder and handlebar switch housings that take the stock switches.
Easy to follow step-by-step installation instructions are also included.
Available in chrome or black.
054100 Chrome kit
054101 Black kit
Replacement parts
054106
Clutch line with slave cylinder
054110
Clutch master cylinder rebuild kit
Fits all 1996 thru 2003 Sportster, 2002 thru 2005 VRod, 1996 thru 2005 Softail, 1996 thru 2005 Dyna and
1996 thru 2004 Touring models
740857 Chrome
740856 Contrast Cut
740858 Black OPS
Fits all 2004 to present XL Sportster models
740860 Chrome
740859 Contrast Cut
740861 Black OPS
14
14-068
ROLAND SANDS DESIGNS MASTER CYLINDER CAPS
Add some style to your stock hand controls with RSD's stock
replacement master cylinder caps. Billet aluminum with a chrome, black
Contrast Cut or RSD's propriety Black OPS finish.All covers come with
one black and one brass RSD logo. Up to you which one you fancy
most.
HYDRAULIC CLUTCH CONVERSION KITS
Complete handle bar control kits for all 1996 to present Big Twin
models, including 6-speed Twin Cam 96 models, to convert a cable into
a hydraulic operated clutch. Hydraulic operated clutches require 30%
less hand lever effort compared to cable operated clutches. Kits come
complete with all parts for on your handlebars, hydraulic line for the
clutch, as well as a hydraulic slave cylinder that fits in the stock
transmission cover that is mounted to the right side of your
transmission. Step-by-step installation instructions are also included to
allow for an easy conversion. Available in chrome or black finish.
054102 Chrome clutch conversion kit for Big Twin
054103 Black clutch conversion kit Big Twin
Replacement parts
054109
Clutch line with slave cylinder
054110
Clutch master cylinder rebuild kit
CHROME MASTER CYLINDER
COVER 1996 STYLE
This chromed cover adds a highlight to your
black front brake master cylinder.Will also fit
the clutch master cylinder on models equipped with a stock style
hydraulic clutch master cylinder. Comes complete with gasket, fluid
level view glass and mounting screws. Fits Evolution Big Twins 1996 thru
1999, and Sportster models 1996 thru 2003 (OEM 45004-96A).
144259 Chrome fluted master cylinder cover
Fits all 2006 to present Softail, all 2006 to present
Dyna and 2005 thru 2007 Touring models
740854 Chrome
740853 Contrast Cut
740855 Black OPS
Fits all 2008 to present Touring models
740851 Chrome
740850 Contrast Cut
740852 Black OPS
NOTE: T HE NEW DOT 4 ( AS USED IN THE LATE
H ARLEY-D AVIDSON ) CAN BE MIXED WITH THE
OLD DOT 4 WITHOUT ANY PROBLEM , EVEN WITH THE
OLDER DOT 3. T HE NEW DOT 4 CAN NOT BE
MIXED WITH DOT 5. DOT 5 IS A S ILICON BASED
FLUID THAT HAS ITS OWN FORMULA . T HIS ALSO
MEANS THAT DOT 4 CAN NOT BE USED IN A SYSTEM
THAT HAS BEEN ON DOT 5 ( AND VICE VERSA )
MODELS
UNLESS THE WHOLE SYSTEM HAS BEEN TAKEN APART
AND CLEANED . I T ALSO NEEDS NEW SEALS AND CUPS
BEFORE THE
DOT 4
CAN BE USED .
C LEANING
THE
PARTS WITH CLOTH OR PAPER IS ALSO NO OPTION ,
THE PARTS HAVE TO BE VERY WELL CLEANED WITH
BRAKE CLEANER !!
(ZPN 235213
OR SIMILAR ).
Handlebar Controls
Chrome with Black Lettering, 1996 - 2006
370304 Complete kit
Individual Parts
700768 Left turn signal switch (OEM 71598-96)
700766 Right turn signal switch(OEM 71591-96)
700770 Horn and dimmer switch (OEM 71597-96)
700764 Engine start and stop switch (OEM 71589-96)
700772 Master cylinder stop light switch (OEM 71590-96)
Black with White Lettering, 1996 - 2006
370300 Complete kit
Individual Parts
700769 Left turn signal switch (OEM 71598-96)
700767 Right turn signal switch (OEM 71591-96)
700771 Horn and dimmer switch (OEM 71597-96)
700765 Engine start and stop switch (OEM 71589-96)
700772 Master cylinder stop light switch (OEM 71590-96)
Chrome with combined Black Lettering/Symbols
370318 Complete kit, fits 1996 thru 2006 models
370199 Complete kit, fits 2007 to present models, except 2011
and later Softail and 2012 and later Dyna
Black with combined White Lettering/Symbols
370317 Complete kit, fits 1996 thru 2006 models
370200 Complete kit, fits 2007 to present models, except 2011
and later Softail and 2012 and later Dyna
HANDLEBAR MASTER CYLINDER REPAIR KITS
Complete repair kits for the handlebar master cylinder on 1996 to
present models. They include all internal parts needed for a complete
rebuild. O-Rings and cups are made of special synthetic rubber to
prevent swell.
Fits 9/16" bore master cylinder for single disc on
1996 to present Big Twin and Twin Cam models and
1996 thru 2003 Sportster (OEM 45006-96)
144125 Fits 9/16" bore
2004 thru 2006 Sportster (OEM 42803-04A)
744480 Genuine
2007 to present Sportster (OEM 42803-07A)
744484 Genuine
Fits 11/16" bore master cylinder for dual disc on
1996 thru 2005 Big Twin and Twin Cam models,
2002 thru 2005 V-Rod and 1996 thru 2003 Sportster
(OEM45072-96)
144131 Fits 11/16" bore
2004 thru 2006 Sportster (OEM 42809-04B)
744481 Genuine
2007 to present Sportster (OEM 42809-07A)
744485 Genuine
2006 to present Twin Cam and 2006 to present V-Rod
(OEM 42862-06A)
744486 Genuine
14
ERGONOMIC HANDLEBAR SWITCHES FOR 1996 TO
PRESENT MODELS
These ergonomic switches are for use on 1996 to present bikes with
the rounded handlebar controls.The contoured switch rockers provide
easier operation and improved recognition, even when wearing gloves.
Switches feature better water resistance for improved reliability in wet
weather conditions. Switches come completely pre-wired with colorcoded 48" long wiring harness for easy installation.Available in Chrome
with black lettering or black with white lettering, Chrome with
combined black symbols, or black with white symbols in complete kits.
According to the latest European type approval regulations switches
with symbols must be used on new motorcycles. Lettered switches are
also available individually. Kits include wire terminals, mounting screws
and instructions. Available for 1996 thru 2006 models and 2007 to
present models.The 2007 to present version has an extra switch on the
clutch lever that operates the clutch interlock system. Kits do not fit
models with radio controls.
14-069
Handlebar Controls
BERINGER HANDLEBAR CONTROLS
Beringer's brake master cylinder is a true high-tech development with
its radial placed hydraulics and the hand lever rolling on 3 ball bearings
to reduce friction.This combination provides maximum braking power
with the least hand force.The piston diameter is optimized for use with
any 4 or 6 piston Beringer caliper in either single or dual applications.
Brake master cylinder and matching lever assembly for cable operated
clutch are available in polished, black, or chrome finish.
14
Polished
701525
Black
701526
701536
701537
701531
701532
701528
701529
Chrome
701527 Radial brake master cylinder
for dual disc application
701538 Radial brake master cylinder
for single disc application
701533 Radial clutch master
cylinder
701530 Clutch lever assembly
Left
701540
701542
701544
Right
701539 Black anodised
701541 Chrome
701543 Polished
701534 Electric switch for brake or clutch master cylinder
701535 Replacement inspection window and seal
PM CONTOUR BILLET ALUMINUM THROTTLE
HOUSING
Gloppy throttle housings have ruined a fair share of bikes, that's why
PM designed this one as a perfect match with their Contour handlebar
controls. Available for single cable, dual cable or dual cable snap-in in
polished or black anodized.
NOTE: T HE
DOT 4 ( AS USED IN THE LATE
MODELS H ARLEY-D AVIDSON ) CAN BE MIXED
NEW
USED .
C LEANING
DOT 4
CAN BE
(ZPN 235213
14-070
MIRROR HOLDERS FOR BERINGER MASTER
CYLINDERS
These mirror holders fit perfect on Beringer's brake and clutch master
cylinders. CNC machined billet aluminum with black anodized, chrome
or polished finish. Note that these mirror holders are
M10x1.25 threaded so do not take stock Harley-style mirrors.
OR SIMILAR ).
Single cable Contour throttle housing
721581 Polished
740560 Black
Dual cable Contour throttle housing, can be used with
all 1981 thru 1995 stock and stock-style cables
721582 Polished
740570 Black
Dual cable snap-in Contour throttle housing, can be
used with all 1996 to present stock and stock-style
cables
721583 Polished
740571 Black
Handlebar Controls
PERFORMANCE MACHINE CONTOUR HANDLEBAR
CYLINDERS
PM's "Contour" machined clutch and brake master cylinders are a
thing of beauty.The gracefully curved one piece body, adjustable reach
handle and refined internals represent the very best in CNC art work.
Designed with the Custom builder in mind, billet aluminum has never
looked so good. Levers and perches are comfort designed, CNC
machined from billet aluminum and then highly polished.The Contour
handlebar master cylinders feature state-of-the-art contoured
machining and race proven internals for a comfortable feel and
unparalleled looks. The hot set-up for Custom bike builders. Available
in polished or black anodized.
Contour hydraulic clutch master cylinder
Polished Black
721383 740572 11/16" Bore
Contour clutch lever assembly, includes perch, lever
and clamp (will not work with OEM switch housing)
Polished
Black
721471 740573 Clutch lever assembly
Contour front brake master cylinder
Polished Black
721853 731402 9/16" Bore
721381 731679 11/16" Bore
14
PM CONTOUR HAND CONTROL SPACERS
These Contour hand control spacers are designed to fill the gap between
Performance Machine Contour switch housing and the grips on the
clutch side. For those who use the popular 1 1/4" diameter Fat Style
handlebars PM offers special Fat Bar adapter spacers, which are
designed for both right and left side applications. Spacers are sold each.
A. 722194 Fat Bar spacer left for cable clutch lever, polished
B. 722195 Fat Bar spacer right or left for hydraulic reservoir,
polished
C. 722196 Control spacer for cable clutch lever, polished
723196 Control spacer for cable clutch lever, black
D. 722197 Control spacer for PM hydraulic clutch side spacer,
polished
723197 Control spacer for PM hydraulic clutch side spacer,
black
Optional and replacement parts
721887 Optional brake light switch
721422 For Contour master cylinder
721382 Replacement brake lever
721384 Replacement clutch lever for hydraulic clutch master
cylinder
721394 Replacement lever
14-071
Handlebar Controls
PM MASTER CYLINDER REBUILD KITS
Kits for 9/16" bore
Kits for 5/8" bore
721420 Manufactured after 01-12-1996
721317 Manufactured 01-06-1995 thru 31-11-96
721421 Manufactured before 01-06-1996
Kits for 3/4" bore
721423 Manufactured after 01-12-1996
721318 Manufactured 01-03-1996 thru 31-11-96
721424 Manufactured before 01-03-1996
Kits for 11/16" bore
14
PM Handlebar master cylinder gaskets
721495 Fits all PM handlebar master cylinders except Contour
models
721496 Fits PM Contour handlebar master cylinders
Recommended Master Cylinder Bore Sizes for use
with OEM and other aftermarket front brake
calipers
Single disc:
Classic 5/8"
Contour 9/16"
Dual disc:
Classic 3/4"
Contour 11/16"
Recommended Master Cylinder Bore Sizes for use
with PM front brake calipers
PM
Classic Style
Contour Style
Caliper
Single Dual
Single Dual
125X2
5/8" 5/8"
9/16" 9/16"
125X4R, S, SL
5/8" 5/8"
9/16" 11/16"
112X6SSL, RSL, B
5/8" 5/8"
9/16" 9/16"
112X6SSB, RSB
5/8" 3/4"
9/16" 11/16"
162X2
5/8" 3/4"
9/16" 11/16"
137X6
5/8" 3/4"
9/16" 11/16"
137X4, R, B
5/8" 3/4"
9/16" 11/16"
PM "CONTOUR" BILLET ALUMINUM SWITCH
HOUSINGS
PM's billet aluminum switch housings are a perfect complement to PM's
Contour handlebar master cylinders. The subtle elegance blends with
Contour hydraulic or cable operated handlebar controls creating a
seamless look.Available as single button or three button switch units.Will
not work with other than PM Contour handlebar controls. PM Contour
switch housings are made from billet aluminum with a high luster polished
finish. Come with high quality relaystyle push button switches to eliminate
the use of separate relays. Switches are pre-wired with 24" leads.
Single button switch housings
Polished Black
721472 740574 Left, for use with hydraulic or cable operated
clutch
721473 740575 Right
Three button switch housings
Polished Black
721476 740576 Left, for use with cable operated clutch
721474 740577 Left, for use with hydraulic clutch
721475 740578 Right
Replacement switches and buttons
721966 Kill switch
721967 Turn signal/starter/horn switch
721968 High/low beam switch
722457 Replacement round button, black
NOTE: T HE
MODELS
USED .
C LEANING
DOT 4
CAN BE
(ZPN 235213
14-072
OR SIMILAR ).
Handlebar Controls
PM CONTOUR SWITCHES FOR TOURING MODELS
These handlebar switches are for use with Performance Machine
Contour brake and clutch controls. They utilize the OEM stereo and
cruise control switches for a simple install and ease of use. Available
in polished, chrome or black.
REBUILD KITS FOR GMA MASTER CYLINDERS
The now obsolete rectangular billet aluminum master cylinders from
GMA have been popular for many years. However, rebuild kits for these
are still available.
233728 Master cylinder repair kit 5/8"
233729 Master cylinder repair kit 3/4"
For 4 switches and PM Contour hydraulic clutch
control
752056 Polished
752057 Chrome
752058 Black
For 4 switches and PM Contour cable clutch control
752059 Polished
752060 Chrome
752061 Black
NESS DIE-CAST CONED THROTTLE HOUSING
• Designed to accept 1982 thru 1995 single throttle cable
• Made from durable die-cast zinc
• Chrome finish
A20298 Coned chrome die-cast throttle housing
For 5 switches and PM Contour cable clutch control
752065 Polished
752066 Chrome
752067 Black
For 4 switches and PM Contour brake control
752068 Polished
752069 Chrome
752070 Black
For 5 switches and PM Contour brake control
752071 Polished
752072 Chrome
752073 Black
NESS BILLET LEFT SIDE FALSE "THROTTLE" HOUSING
• For use on the handlebar's left side
• Balances the looks of your bike's handlebars
• Available in Grooved design with or without Petite switch
A20279 Grooved
A20278 Grooved with petite switch
14
For 5 switches and PM Contour hydraulic clutch
control
752062 Polished
752063 Chrome
752064 Black
14-073
Handlebar Controls
NESS BILLET THROTTLE HOUSING
• Perfect compliment to Ness billet hand controls and grips
• Available in either Grooved or Radius designs with or without Petite
switch and for single and dual cable
• CNC machined from 6061-T6 billet aluminum
• Chrome finish
• Designed for 1982 thru 1995 throttle cable applications
14
A20297 Grooved, Dual cable with Petite switch
A20283 Radius, Single cable
A20287 Radius, Single cable with Petite switch
ARLEN NESS RAD III HANDLEBAR CONTROLS
Arlen Ness introduces the industry's first factory replacement full custom
hand controls. The RAD III controls are guaranteed to give your stock
handlebars a great new look. Complete kits include: master cylinder,
brake lever, clutch perch, brake lever and appropriate switch housings.
Controls and switch housings accept all factory wires, cables, lines and
switches.Available for single or dual disc 1996 thru 2007 models with
cable operated clutch, also for models originally equipped with radio
and/or cruise control
• Any of our Arlen Ness mirrors and grips are a great addition to these
kits
Chrome Black
A08745 A08870 Kit for Single Disc models, includes 9/16"
Master Cylinder, Chrome
A08746 A08871 Kit for Dual Disc models, includes 11/16"
Master Cylinder, Chrome
A08747 A08872 Kit for 1996 thru 2007 Dual Disc Touring
models w/radio, includes 11/16" Master
Cylinder Chrome
A08748 A08880 Kit for 1996 thru 2007 Dual Disc Touring
models w/radio & cruise, includes 11/16"
Master Cylinder Chrome
A08850 A08881 Kit for 2008 to present Dual Disc Touring
models, includes 15 mm Master Cylinder
models w/radio, includes 15 mm Master
Cylinder
models w/radio & cruise, includes 15 mm
Master Cylinder
Individual components
Chrome Black
A08740 9/16" Brake Master Cylinder (includes lever)
A08741 11/16" Brake Master Cylinder (includes
lever)
A08860 15 mm Brake Master Cylinder with lever
A08743 Cable clutch perch with lever
A08750 Replacement Clutch Lever
A08751 Replacement Brake Lever
A08752 Replacement Brake Master Cylinder Cover
A08737 A08877 Standard switch housing set
A08738 A08878 Switch housing set with Radio
A08739 A08879 Switch housing set with Radio & Cruise
Control
Replacement parts
A08755 9/16" Complete Rebuild Kit
A08756 11/16" Complete Rebuild Kit
A08865 15 mm Complete Rebuild Kit
14-074
Handlebar Controls
NESS-TECH® RAD II HANDLEBAR CONTROLS
• Radically sculptured Ness design.
• Invisible mounting design for body, lid and levers
• Bearing mounted levers for smooth operation
• Carved from 6061-T6 billet aluminum
• Kits include master cylinder, clutch lever, perch and switches where
applicable
• Elegantly chrome plated
Note: 9/16” bore for single disc, 3/4” bore for dual disc applications
2-Button
Switch
A08674
A08671
A08654
Smooth
Style
A08632
A08653
A08698
A08673
A08649
A08688
A08686
A08656
A08648
A08658
A08647
A08680
A08665
A08685
A08665
A08662
A08665
A08663
A08664
A08661
A08664
A08661
A08664
A08661
9/16" Kit, Cable Clutch
3/4" Kit, Cable Clutch
9/16" Kit, Hydraulic Clutch
3/4" Kit, Hydraulic Clutch
9/16" Brake Master
Cylinder
3/4" Brake Master Cylinder
11/16" Hydraulic Clutch
M/C
Switch Housing Kit
Brake Lever
Clutch Lever Assembly,
cable
Clutch Lever, cable
Clutch Lever Hydraulic
3-Button
Switch
A08620
A06628
A06629
A06659
2-Button
Switch
A08620
A06628
A06629
A06659
A06625
A06625
A08621
A08666
A15502
A08621
A08666
A15502
Smooth
Style
A08620
A06628
A06629
A06659
9/16" Rebuild kit
5/8" Rebuild Kit
3/4" Rebuild Kit
11/16" Clutch M/C Rebuild
Kit
Potted replacement switch
with 30" wire leads,
1997-up production (Can
be used in earlier
production with slight
modification)
Button Cap
A08666 Replacement Lid Gasket
A08669 Switch Cover Kit
Easy Beam Hi/Lo Relay
3-Button
Switch
A08694
A08691
A08696
A08693
A08677
14
14-075
Handlebar Controls
14
14-076
NESS RETRO-ROCKET HANDLEBAR CONTROL KITS
• Innovative retro styling with modern day technology
• All components are machined from 6061-T6 billet aluminum and
chromed
• Handlebar control kit available with 9/16" brake master for single disc
applications with clutch lever assembly for cable operated clutch or
master cylinder for hydraulic clutch
• Handlebar control kit available with 11/16" brake master for dual
disc applications with clutch lever assembly for cable operated clutch
or master cylinder for hydraulic clutch
• Three-button switch block designed to work on either brake or clutch
side available separately
• Matching design forward controls are also available
Chrome Black
A08720 A08726 Handlebar control kit 9/16" brake master
cylinder with cable clutch
with cable clutch
with hydraulic clutch
with hydraulic clutch
A08704 A08711 Switch block, three-button
A08724 A08730 Brake master cylinder 9/16" bore
A08725 A08731 Brake master cylinder 11/16" bore
A08707 A08713 Cable clutch lever assembly
A08732 A08733 Replacement clutch lever
A08709 A08717 Hydraulic clutch master cylinder 11/16" bore
Replacement parts
A08620 9/16" Rebuild Kit
A08622 11/16" Bore brake rebuild kit
A06659 11/16" Clutch M/C Rebuild Kit
A08621 Button Cap
A06625 Potted replacement switch with 30" wire leads,
1997-up production (Can be used in earlier production
with slight modification)
Handlebar Controls
NESS PETITE SWITCH, CUSTOM AND STOCK STYLE
HANDLEBAR CONTROLS
• Ness designed controls are CNC machined and chrome plated for a
clean look
• Petite Switch style feature small button switches that are virtually
invisible
• Custom style is the designed for the rider who wants clean switchless controls
• Stock Style controls clean up the looks of your handlebar while
retaining your stock 1996 to present switch gear
• Kits available for single or dual disc brake and cable or hydraulic
operated clutch
Petite Switch style
A08516 Kit, 3/4" brake, cable clutch
A06666 3/4" Brake Master Cylinder only
A06661 11/16" Clutch Master Cylinder only
A06652 Clutch lever assembly with switch
A06639 Petite switch clamp with switches, buttons and wiring
Stock Switch Style
Replacement parts
A08515 Clutch Cable Pin Adapter For Eyelet Style Cables
A06614 Clutch lever, Cable style
A06605 Master Cylinder Cover and "Super-Seal" Gasket, Brake
or Clutch
A06646 Brake Lever W/ Plunger Pin
A06623 Plunger pin for brake lever
A06624 Clutch Lever Pivot Pin
A06620 Early style switch, un-potted and unwired, each
A06625 Potted replacement switch with 30" wire leads, 1997-up
production (Can be used in earlier production with slight
modification)
A06621 Switch button cap, each
Custom Style
A08552 Kit, 5/8" brake, hydraulic clutch
A06660 11/16" Clutch Master Cylinder only
A06647 Clutch lever assembly
PARTS FOR NESS RADIUS CONTROLS
• Replacement parts for the obsolete Radius handlebar controls
A08606 3/4" brake master cylinder, switch style
A06606 Brake master cylinder cover and seal
A06607 Clutch master cylinder cover and seal
A06625 Potted replacement switch with 30" wire leads, 1997-up
production (Can be used in earlier production with slight
modification)
A06620 Early style switch, un-potted and unwired, each
A08621 Button Cap
A06634 5/8" Hydra clutch rebuild kit
A06623 Plunger pin for brake lever
14
14-077
Handlebar Controls
14
14-078
REBUFFINI ELLIPSE HANDLEBAR CONTROLS
Rebuffini's "Ellipse" controls are a very clean design that matches
with almost any style of bike. Ellipse controls can be used with 1"
diameter handlebars as well as 1 1/4" stepped design bars, such as
our Phat handlebars. Brake levers are available in 1/2" bore for use in
single disc applications and 9/16" bore for use in dual disc applications.
Clutch levers are available for use with the stock clutch cable or for use
with a hydraulic clutch. Both the brake and clutch master cylinders are
equipped with adjustable reach levers. These controls are not
compatible with stock switch housings. Matching 2-button and
3-button switch blocks are available separately. The 3-button switch
blocks are also available with EC-compliant engraved symbols.All parts
are CNC machined from solid billet aluminum available with a high
luster polished finish, black anodized or chrome plated.
Brake master cylinders
1/2" bore 9/16" bore
746081 746087 Polished
746082 746088 Black
746083 746089 Chrome
Brake master cylinders, TÜV approved
1/2" bore 9/16" bore
746084 746090 Polished
746085 746091 Black
746086 746092 Chrome
Clutch lever assemblies
Cable
Hydraulic
746096 746093 Polished
746097 746094 Black
746098 746095 Chrome
Switch assemblies for brake side
2-Button
Smooth Smooth Symbols
746142 746145 746112 Polished
746143 746146 746113 Black
746144 746147 746114 Chrome
Switch assemblies for hydraulic clutch assemblies
2-Button
746148 746151 746115 Polished
746149 746152 746116 Black
746150 746153 746117 Chrome
Switch assemblies for cable clutch assemblies
2-Button
746169 746172 746118 Polished
746170 746173 746119 Black
746171 746174 746120 Chrome
Replacement clutch levers
Cable
Hydraulic
746160 746157 Polished
746161 746158 Black
746162 746159 Chrome
Brake light switches
746165 Polished
746166 Black
Clutch/kickstand switches
To maintain the stock kickstand sensor on 2008 and later models
746167 Polished
746168 Black
Rebuild kits
746099 For 1/2" bore brake master cylinder
746100 For 9/16" bore brake or clutch master cylinder
Replacement brake levers
746154 Polished
746155 Black
746156 Chrome
Replacement switch parts
746111 On/off switch
746110 Momentary switch
746121 Switch button cap
Handlebar Controls
REBUFFINI COMET HANDLEBAR CONTROLS
Rebuffini's "Comet" controls drastically change the looks of your bike.
These controls look more like "growing from" as "bolted on" your
handlebars. CNC machined from solid billet aluminum available with
a high luster polished finish, black anodized or chrome plated. These
controls can be used with 1" diameter handlebars as well as 1 1/4"
stepped design bars, such as our Phat handlebars. Brake levers are
available in 1/2" bore for use in single disc applications and 9/16"
bore for use in dual disc applications. Clutch levers are available for
use with the stock clutch cable or for use with a hydraulic clutch.
Matching 2-button and 3-button switch blocks are available separately.
The 3-button switch blocks are also available with EC-compliant
engraved symbols.
Brake light switches
746165 Polished
746166 Black
1/2" bore
9/16" bore
746122
746129 Polished
746123
746130 Black
746124
746131 Chrome
746154 Polished
746155 Black
746156 Chrome
Rebuild kits
746128 Top cover seal brake master cylinder
746138 Top cover seal clutch master cylinder
Replacement switch parts
746111 On/off switch
746110 Momentary switch
746121 Switch button cap
Cable
Hydraulic
746139
746135 Polished
746140
746136 Black
746141
746137 Chrome
Cable
Hydraulic
746160
746157 Polished
746161
746158 Black
746162
746159 Chrome
14
Brake master cylinders, TÜV approved
1/2" bore
9/16" bore
746125
746132 Polished
746126
746133 Black
746127
746134 Chrome
Clutch/kickstand switches
To maintain the stock kickstand sensor on 2008 and later models
746167 Polished
746168 Black
N OTE : R EBUFFINI RECOMMENDS THE USE OF
NON - SILICONE DOT 4 HYDRAULIC FLUID .
14-079
Handlebar Controls
REBUFFINI MINI HANDLEBAR CONTROLS
A stylish design by Rebuffini. CNC machined from solid billet aluminum
available with a high luster polished finish, black anodized or chrome
plated. These controls can be used with 1" diameter handlebars as
well as 1 1/4" stepped design bars, such as our Phat handlebars. Brake
levers are available in 1/2" bore for use in single disc applications and
9/16" bore for use in dual disc applications. Clutch levers are available
for use with the stock clutch cable or for use with a hydraulic clutch.
Hydraulic fluid reservoir must be ordered separately, allowing you to
make a combination that looks exactly the way you want it. Matching
2-button switch blocks are available separately.
2-Button switch assemblies
Left
Right
746202 746205 Polished
746203 746206 Black
746204 746207 Chrome
Cable
Hydraulic
746214 746211 Polished
746215 746212 Black
746216 746213 Chrome
Rebuild Kits
14
746208 Polished
746209 Black
746210 Chrome
1/2" bore
9/16" bore
746181
746184 Polished
746182
746185 Black
746183
746186 Chrome
Clutch levers
Cable
746190
746191
746192
Hydraulic
746187 Polished
746188 Black
746189 Chrome
Single cable
746101 Polished
746102 Black
746103 Chrome
Dual cable
746104 Polished
746105 Black
746106 Chrome
Snap-in style
746107 Polished
746108 Black
746109 Chrome
Hydraulic fluid reservoirs
Alpha
Beta
746193
746196
746194
746197
746195
746198
14-080
REBUFFINI'S BILLET THROTTLE HOUSINGS
CNC machined handlebar throttle housings. Made from solid billet
aluminum on state of the art machinery.Available in polished, chrome
plated or black anodized. Single cable housings are threaded
5/16-18 for use with 1981 thru 1996 style throttle cables. Dual cable
housings are threaded 5/16-18 and 1/4-20 for use with 1981 thru
1996 style throttle and idle cables. Snap-in style throttle housings take
1996 to present throttle and idle cables.
Gamma
746199 Polished
746200 Black
746201 Chrome
N OTE : R EBUFFINI RECOMMENDS THE USE OF
NON - SILICONE DOT 4 HYDRAULIC FLUID .
Handlebar Controls
NOTE: T HE
DOT 4 ( AS USED IN THE LATE
MODELS H ARLEY-D AVIDSON ) CAN BE MIXED
NEW
USED .
C LEANING
DOT 4
CAN BE
KUSTOM TECH THROTTLE HOUSINGS
Kustom Tech's throttle housings are designed for use with just a single
throttle cable and made from forged aluminum or forged brass. Both
brass and aluminum throttle housings are available in polished and
satin finish. A perfectly match with Kustom Tech's DeLuxe handlebar
controls.
751243 Satin brass
751245 Satin aluminum
KUSTOM TECH DELUXE SWITCH HOUSINGS
Kustom Tech's DeLuxe switch housings are forged from solid brass.
Available in polished, satin, chrome plated and satin chrome plated
finish. Compact size and feature external fins to match perfectly with
Kustom Tech's DeLuxe handlebar controls.
751247 Satin brass
751248 Chrome
751249 Satin chrome
14
BILLET DESIGNER HANDLEBAR CONTROLS BY
KUSTOM TECH
These designer handlebar controls are another proof that Italians can
produce very stylish parts and accessories. These Custom controls are
CNC machined from billet aluminum. Levers and perches have radiused
edges, offering a very comfortable pull. With their polished finish they
are the hottest set-up available for any Customizer. All components
are separately available. Available are 14 mm bore handlebar master,
a 14 mm clutch master cylinder, or as set that includes a cable operated
clutch lever assembly and a 14 mm diameter brake master cylinder.
741138 Cable clutch lever assembly and brake master cylinder
741139 Brake master cylinder
741140 Clutch master cylinder
741141 Rebuild kit for brake or clutch master cylinder
(ZPN 235213
OR SIMILAR ).
14-081
Handlebar Controls
KUSTOM TECH DELUXE HANDLEBAR CONTROLS
Kustom Tech's DeLuxe handlebar controls have a design that is inspired by the handlebar controls
found on vintage motorcycles. These controls are CNC machined from billet material and have
a polished or satin finish. Available in aluminum or a beautiful combination of aluminum and
brass.
751270 12 mm bore, polished brass and aluminum
751271 12 mm bore, satin brass and aluminum
751274 12 mm bore, polished aluminum
751275 12 mm bore, satin aluminum
751272 14 mm bore, polished brass and aluminum
751273 14 mm bore, satin brass and aluminum
751276
14 mm bore, polished aluminum
751277 14 mm bore, satin aluminum
751278 Brass and aluminum, polished
751279 Brass and aluminum, satin
751280 Aluminum, polished
751281 Aluminum, satin
Replacement parts
751282
Clutch cable adjuster, brass
751283
Rebuild kit for 12 mm bore brake master cylinder
751284
Rebuild kit for 14 mm bore brake master cylinder
14
14-082
MINI PUSH BUTTON SWITCH
This tiny little stainless steel push button
switch comes with a special radius shaped
spacer to allow mounting in handlebars.
Switch works for turn signal. starter, horn, kill
or hi-low, must be used with a switch relay.
Requires a 9/32" hole and 5/16" UNF nut.
Switch is less than 1/2" in diameter and sticks
only 1/4" above the handlebar surface. Of
course you can also install this switch on flat
surfaces when you do not use the radius
shaped spacer. Installation requires a 9/32"
drill and a 5/16-24 UNF tap. Switch comes
with two 20" wires installed.
TWO BUTTON HANDLEBAR
SWITCH
Chrome handlebar switch housing for use on
1" (25.4 mm) handlebars. Features
2 momentary push button switches that come
pre-wired. Housing is only 1/2" (12 mm)
wide. Great to control air shock compressors
or auxiliary lights.
370268 2-Button handlebar switch
TWIN USB POWER DEVICE
This Twin USB power device has two standard
USB sockets. Great for your GPS, mobile
phone, digital camera or anything else that
can charge via a USB connection. This
lightweight device is shock- and
weatherproof and can be easily mounted on
all 7/8" to 1" (22 to 25.4 mm) handlebars.
Comes pre-wired with 120cm long wires.
Installation instructions are included.
390049 Handlebar mounted USB power
device
Handlebar Controls/Control Cables
HANDLEBAR MOUNT KIT FOR
MOBILE DEVICES
This handlebar mount kit provides mounting
options for many of today's popular mobile
electronics, such as cell phones, PDA's,
Satellite Radio's and GPS units. The mount
attaches to the clutch lever perch on the
handlebars of all 1982 to present models with
the included hardware. Mount is made from
thick 12 gauge (2 mm) steel with chrome or
black finish and features the standard hole
pattern for mobile device cradles.The specific
cradle for your device can be obtained from
shops specialized in mobile electronics.
163057 Chrome multi mount kit
163058 Black multi mount kit
POLISHED ALUMINUM PUSH ON
CABLE CLAMPS
To neatly route cables along your fork tubes,
these highly polished clamps are available in
either smooth or grooved versions. Universal
fit on all forks with 1 5/8" (41.275 mm)
diameter fork tubes. Sold in pairs.
090121 Smooth
090137 Grooved
THROTTLE AND IDLE CABLE
CLAMP
Billet aluminum throttle and idle cable clamp,
keeps your cables neatly together. Easy to
install. Show chrome finish.
061090 Throttle and idle cable clamp
PRO-ONE CHROME PLATED
BILLET ALUMINUM CABLE GUIDE
CLAMPS
Get those wild cables under control with
these cable clamps.These billet cable clamps
are another of those little details that mean
the difference between winning and just
being runner up.Available for speedo, clutch
and single or dual throttle cables. All clamps
have a perfect chrome plated finish.
239404 Clutch cable clamp 1"
239405 Clutch cable clamp 1 1/8"
239406 Clutch cable clamp 1 1/4"
239407 Throttle cable clamp 1" hole
239408 Throttle cable clamp 2" hole
239409 Speedo cable clamp 41.2 mm
14
CIGARETTE LIGHTER OUTLET
This 12 Volt car-type cigarette lighter comes
in a moisture proof plastic housing and
features a strong clamp that can be fitted to
any 7/8" (22 mm) or 1" (25.4 mm) tube, such
as your handlebars. Has a rubber cap to seal
it off when the lighter is taken out. Provides
you with a 12 Volt outlet as a power supply
for almost any GPS navigation system, mobile
phone, MP3 player and so on as these usually
come with a cigarette lighter style plug. The
outlet comes pre-wired with an in-line fuse
holder and 10 Amp wedge type fuse.
500400 Cigar lighter outlet
BLACK ADDER CABLE CLAMPS
These tough black Elastomer clamps won't
scratch your paint, won't rust and won't break
but still route throttle, idle or clutch cables,
ignition wires, brake lines and so on nice and
tidy along the frame tubes. Also reduce
vibrations and outer cable wear compared to
metal cable clamps.They install in seconds as
they snap on the tubes and use a strong and
simple O-ring fixing system.Available with a
single hole for one cable or boob-style double
hole for two cables. Install using the small Oring on 1 1/8" (28 thru 30 mm) tubes, the
large O-ring for 1 1/4" (31.75 thru 32 mm)
tubes. Sold in pairs.
061006 Single cable version, 2 pieces
061007 Dual cable version, 2 pieces
14-083
Control Cables
ZODIAC CHROME CABLE CLAMPS
Chrome plated aluminum cable clamps to
route clutch and throttle cables neatly along
frame tubes or handlebars.The 1" clamps will
fit most aftermarket frames and may also be
used on handlebars. The 1 1/8" clamps fit
stock Softail, 4 Speed, and Sportster models
thru 1981.The 1 1/4" clamps fit all Sportster,
FXR and Dyna models 1982 to present.
Available in plain and ball milled, throttle
cable clamps are available for use with single
or dual cable.
Plain
061101
061103
061105
061107
061109
14
14-084
Ball Milled
061100 Clutch cable clamp
1" frame or
handlebar
1 1/8" frame
1 1/4" frame
061106 Single throttle cable
clamp 1" frame or
handlebar
061108 Dual throttle cable
clamp 1" frame or
handlebar
CHROME PLATED BILLET
ALUMINUM DUAL CABLE
CLAMPS
Chrome plated billet aluminum cable clamps
to route both idle and throttle cables. 2-piece
clamp design allows fixation of both cables
without cable removal. Clamps are available
in 5 different sizes to fit handlebars and/or
tubes from 1" thru 2".
061053 Dual throttle cable clamp 1"
061054 Dual throttle cable clamp
1 1/4"
1 1/2"
1 3/4"
061057 Dual throttle cable clamp 2"
BRAKE LINE AND WIRE CLIPS
These clips are used in many places on models
from 1968 to present. They are, for example,
used to hold the rear brake line on the swing
arm of 1958 thru 1986 4-speed Big Twins,
throttle cables to the frame on Ironhead
Sportsters and numerous other applications.
Take up to 1/2" diameter hoses and cables
and have a .200" mounting hole.
099033 Brake line clip, dealer 10-pack
(OEM 38712-68)
THROTTLE WIRING EXTENSIONS
FOR 2008 TO PRESENT "FLY BY
WIRE" TOURING MODELS
The "Fly By Wire" throttle control system as
introduced on the 2008 Touring models
replaces the commonly used throttle and idle
cables. Installation of higher or wider than
stock handlebars requires you to extend the
OEM wiring. For this purpose we supply ready
to install extensions that plug in between the
existing connectors for trouble free operation.
231891 8" (20 cm) extension kit
PLUG-N-PLAY THROTTLE BY WIRE
CABLE KIT
This NAMZ Throttle-by-Wire "Plug-n-Play"
wiring harness is a no brainer when adding
taller handlebars on 2008 to present FLH and
FLT series Touring models, except Screamin'
Eagle and CVO. Longer than stock, one size
fits all for handlebars up to 18" (46 cm) high.
Simply remove the OEM harness and plug this
one in. Comes ready to install and complete
with OEM connectors.
701668 Throttle-By-Wire wiring harness
TROTTLE BY WIRE EXTENSIONS
FOR 2008 TO PRESENT TOURING
MODELS
These Throttle-by-Wire extensions have been
tested and designed by NAMZ to work
perfectly without causing any harm or
interference to the motorcycle's computer.
Fits all 2008 to present FLH and FLT series
models and are a must for all CVO &
Screamin' Eagle models due to the hardwired twist grip assembly. These extensions
do not require any soldering for a quick and
easy installation.
701669 Throttle By Wire extension, 4"
(10 cm)
(20 cm)
(30 cm)
(38 cm)
Control Cables
REAR BRAKE CABLE FOR HARLEY XL
Extra strong rear brake cables for XL models 1975 thru 1978. Black
vinyl outer cable housing.
114347 Fits 1975 thru 1978 (OEM 38634-76)
INNER CABLE, OUTER CASING AND FITTINGS
Now you can make control cables at any length you want.The casings
as well as the inner cables come in 50 feet long rolls. Outer casing has
black PVC coating. Throttle inner cable has 0.125" diameter,
brake/clutch inner cable has 0.125" diameter.Together with the fitting
assortment it is possible to make all cables fit perfectly to any
Customized bike. The fitting assortment contains a variety of control
fittings, cable ends and ferrules, packed in a handy plastic case.A must
for every Custom bike workshop.
Cable fittings
232249 Fitting assortment for Harley-Davidson, containing
nipples and ferrules as undermentioned (not necessarily
in the same quantities)
722389 Cable fitting #N-27, dealer pack of 10
722427 Step-down ferrules #N-35, dealer pack of 10
722428 Throttle Cable #47-7, dealer pack of 20
722429 Throttle fitting #47-1, dealer pack of 25
722430 Slide Lift Fitting #48, dealer pack of 50
722431 Carburetor fitting #49 74-75, dealer pack of
10 (OEM 56302-74)
722432 Ferrule #52 for .22" casing, dealer pack of 30
722433 Ferrule #53 for #30W casing, dealer pack of 20
722434 Brass end #250F for .250" casing, dealer pack of 10
722435 Brass end #250FS for .250" casing, dealer pack of 10
722436 .375" End cap #63F for 70A & 80W casing, dealer pack
of 10
722437 Ferrule #619F for 70A & 80W casing, dealer pack of 10
722439 Slotted #61-H bushing for 1/4" HD throttle casing,
dealer pack of 10
722438 Cable T end #63TK for Sportster clutch lever, each
THROTTLE AND SPARK CONTROL CABLE
Perfect reproduction of the early throttle and spark control cable. Inner
wire is .050" diameter and 66" long. Outer housing is 53" long flexible
wound with PVC covering and has end plug swaged in place. Fits FL
1953 thru 1973, FX 1971 thru 1973 and XL 1957 thru 1973.
114184 Inner cable (OEM 56373-58)
114183 Outer cable (OEM 56503-65)
14
Inner cable and outer casing
232254 Inner cable throttle (roll 50 ft./15 meter)
232497 Inner cable clutch & brake (roll 50 ft./15 meter)
232255 Outer casing throttle (roll 50 ft./15 meter)
232503 Outer casing clutch & brake (roll 50 ft./15 meter)
14-085
Control Cables
CONTROL CABLES FOR HARLEY-DAVIDSON & BUELL
Zodiac offers a wide selection of control cables for almost any
type/model Harley-Davidson, Buell or Custom built motorcycles. Cables
are available in three different brands: Zodiac, Barnett and Magnum
Shielding.
Zodiac control cables high quality cables at very competitive
prices.
Zodiac Black: Stock replacement cables with a black vinyl covered
outer cable
Barnett Braided: American made classic stainless steel braid covered
outer cable
Barnett Clear Coated: American made clear vinyl covered stainless
steel braid outer cable
Zodiac Braided: Same cables as above but with a Braided Stainless
Steel covered outer
Barnett Stealth: American Made totally black cables with black
elbows and black adjusters
14
14-086
Zodiac Clear Coated: Clear vinyl covered Braided Stainless Steel
outer cable
Barnett cables, American made control cables
Barnett Black: American made stock replacement black vinyl covered
outer cable
Magnum Sterling Chromite:
American made cables with a braided steel outer cable. Every strand
of wire used for this braid is individually chrome plated for a super
shiny appearance. Sterling Chromite cables and lines feature crystal
clear Teflon outer jacket offering exceptional protection against scuffing
paint and will never discolor.
How to find your cable:
We have grouped cables by application. Check in the application list
what throttle, idle or clutch cable style and stock length you need for
your model and than choose a cable from the cable listing.The lengths
given are approximately and measured end to end of the visible outer
cable and do not include the end fittings.
Throttle and idle cables come with 90 or 130 degree elbows. The
90 degree elbows add approx. 3 1/2" (8.9 cm) to the cable length,
130 degree elbows add approx. 5" (12.7 cm) to the cable length. Do
not mix 90 and 130 degree elbows for throttle and idle on the same
motorcycle.
Control Cables
Buell models
M2 1997 to present
S1 & S3 1996-1998
X1 1999 to present
Sportster models
XLCH 1971-1973
XLCH 1974-early 1976
XLCH late 1976-1979
XLCR 1977-1978
XLH 1100 1986-1987
XLH 1200 1988-1995
XLH 1200 Std. 1996-2001
XLH 1200 Std. 2002-2003
XL 1200C Custom 1996-1999
XL 1200C Custom 2000-2001
XL 1200C Custom 2002-2006
XL 1200C Custom 2007-up
XL 1200L Low 2007-up
XL 1200N Nightster 2008-up
XL 1200R 2004-2006
XL 1200R 2007-up
XL 1200S Sport 2001
XL 1200S Sport 2002-2003
XLH 1971-1973
XLH 1974-early ‘76
XLH 1981-1985
XLH 50 Anniversary 2007
XLH 883 1986-1987
XLH 883 1988-1995
XLH 883 Deluxe 1987
XLH 883 Deluxe 1988-1995
XLH 883 Hugger 1996-2001
XLH 883 Hugger 2002-2003
XLH 883 Std. 1996-2001
XLH 883 Std. 2002-2003
XL 883 Std. 2004-2006
XL 883 Std. 2007-up
XL 883C Custom 1999
XL 883C Custom 2000-2001
XL 883C Custom 2002-2006
XL 883C Custom 2007-up
XL 883L Low 2002-2006
XL 883L Low, SuperLow 2007-up
XL 883N Iron 2007-up
XL 883R Roadster 2002-2003, 2006
XL 883R Roadster 2007-up
XLH Hugger 1988-1995
XLH Hugger late 1987
XLH late 1976-1980
XLS Roadster 1979 -1980
XLS Roadster 1981-1982
XLS Roadster 1983-1985
XLT 1977
XLX 1983-1985
XR1000 (All)
XR 1200 2008-2010
XR 1200X 2008-up
Big Twin models
ELF (with mousetrap) 1952
FL models with 4-speed transmissions 1968-1975
FL models with mousetrap 1952-1967
FLD Switchback 2012-up
FLHR Road King 1994-1995
FLHR Road King 2007
FLHR Road King 2008
FLHRC Road King Classic 1998-1999
FLHRC Road King Classic 2007
FLHRC Road King Classic 2008-up
FLHRP 1996-2001
FLHRS 2004-2006
FLHRS 2007
FLHRS 2008-up
FLHS Electra Glide Sport 1987-1988
FLHS Electra Glide Sport 1989
FLHS Electra Glide Sport 1990-1995
FLHT Electra Glide 1983
FLHT Electra Glide 1984-1986
Clutch
cable style
Throttle
Stock clutch and Idle
cable length cable style
Stock throttle Throttle and
and Idle
Idle grip
cable length elbow fitting
Idle cable for Fuel
Injected models with
Cruise Control available
XB96
XB96
XB96
50"
50"
50"
XB96
XB96
XB96
32"
32"
32"
XL71
XL71
XL71
XL71
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL71
XL71
XL71
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL86
XL71
XL71
XL71
XL71
XL71
XL71
XL71
XR08
XR08
42"
42"
42"
38"
59"
59"
57"
53"
57"
53"
53"
53"
59"
59"
53"
53"
53"
57"
42"
42"
42"
53"
53"
53"
53"
53"
57"
53"
53"
53"
53"
53"
53"
53"
53"
53"
53"
53"
53"
53"
53"
59"
59"
42"
38"
42"
42"
42"
38"
38"
.."
.."
use ZPN 114184 + ZPN 114183
BT76
33"
BT76
33"
BT76
33"
XL86
32"
XL88
30"
XL96
30"
XL96
30"
XL96
30"
XL96
32"
XL96
30"
XL07
30"
XL07
30"
XL07
30"
XL96
30"
XL07
30"
XL96
30"
XL96
30"
Use cable 114183 + 114184
BT76
33"
BT81
41"
XL07
30"
XL86
32"
XL88
30"
XL86
32"
XL88
30"
XL96
30"
XL96
30"
XL96
30"
XL96
30"
XL96
30"
XL07
30"
XL96
30"
XL96
32"
XL96
30"
XL07
30"
XL96
30"
XL07
30"
XL07
30"
XL96
30"
XL07
30"
XL88
30"
XL86
32"
BT76
33"
BT76
33"
BT81
41"
BT81
41"
N/A
N/A
BT81
41"
N/A
N/A
XR08
.."
XR08
.."
BT52
BT68
BT68
BT68
BT52
FXD06
BT87
BT87
BT87
FXD06
FXD06
BT87
BT87
BT87
FXD06
FXD06
BT87
BT87
FXD06
FXD06
BT87
BT87
BT87
FLT83
FLT83
BT87
BT87
BT87
30"
49"
49"
49"
30"
65"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
51"
51"
62"
62"
62"
Use cable 114183 + 114184
BT76
33"
90 degree
BT76
33"
90 degree
BT81
33"
130 degree
Use cable 114183 + 114184
BT96
32"
90 degree
BT90
42"
90 degree
BT96
44"
90 degree
yes
FLH02
41"
90 degree
yes
FLH02
41"
90 degree
yes
Note: 2008 and later Touring models do not use throttle,- and idle cables
BT96
44"
90 degree
yes
BT96
44"
90 degree
yes
FLH02
41"
90 degree
yes
FLH02
41"
90 degree
yes
BT96
44"
90 degree
BT96
44"
90 degree
yes
BT96
44"
90 degree
yes
BT81
42"
90 degree
BT81
42"
90 degree
BT90
42"
90 degree
BT81
33"
130 degree
BT81
42"
90 degree
BT81
42"
90 degree
BT90
42"
90 degree
BT96
44"
90 degree
Buell
Buell
Buell
90 degree
90 degree
90 degree
130 degree
130 degree
90 degree
90 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
90 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
90 degree
90 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
130 degree
90 degree
90 degree
130 degree
130 degree
130 degree
.. °
.. °
14
Models are listed
in alphabetical order
14-087
Control Cables
14
14-088
Models are listed
Clutch
cable style
FLHTC Electra Glide Classic 1983
FLHTC Electra Glide Classic 1984-1986
FLHTC-SE Electra Glide Classic 2004-2005
FLHTCU Ultra Classic Electra Glide 1989
FLHTCU Ultra Classic Electra Glide 1990-1995
FLHTCU Ultra Classic Electra Glide 2007
FLHTCU Ultra Classic Electra Glide 2008-up
FLHX Street Glide 2006
FLHX Street Glide 2007
FLHX Street Glide 2008-up
FLS Softail Slim 2012-up
FLST Heritage Softail 1986
FLST Heritage Softail 1987-1989
FLST Heritage Softail 1990
FLST Heritage Softail 2007-up
FLSTC Heritage Softail Classic 1987-1989
FLSTC Heritage Softail Classic 2000
FLSTC Heritage Softail Classic 2007-up
FLSTF Fat Boy 1990-1995
FLSTF Fat Boy 2000
FLSTF Fat Boy 2007-up
FLSTF-SE Fat Boy 2005-2006
FLSTN Nostalgia 1990-1995
FLSTN Softail Deluxe 2007-up
FLSTS Heritage Springer 1996-1999
FLSTS Heritage Springer 2000
FLSTS Heritage Springer 2001-2006
FLSTSB Cross Bones 2008-up
FLSTSC Heritage Softail Springer 2005-2006
FLSTSC 2007-up
FLT Tour Glide 1980
FLT Tour Glide 1981
FLT Tour Glide 1982
FLT Tour Glide 1983
FLT Tour Glide 1984-1986
FLTC 1981
FLTC 1982
FLTC 1983
FLTC 1984-1986
FLTC 1987-1988
FLTC 1989
FLTC 1990-1995
FLTCU 1989
FLTCU 1990-1995
FLTCU 1996-2000
FLTR Road Glide 1998-2001
FLTR Road Glide 2002-2006
FLTR Road Glide 2007-up
FX Super Glide 1971-1975
FX Super Glide 1976-1978
FXB Sturgis 1980
FXB Sturgis 1981-1982
FXCW Rocker 2008-up
FXCW-C Rocker Custom 2008-up
FXD Dyna Glide 1996-1999
FXD Dyna Glide 2000-2005
FXD Dyna Glide 2006-up
FXD35 Anniversary 2006-2007
FXDB Sturgis 1991
FXDB Daytona 1992-1995
FXDB Street Bob 2006-up
FXDC Dyna Glide Custom 1992-1995
FXDC Dyna Super Glide Custom 2005
FXDC Dyna Super Glide Custom 2006
FXDC Dyna Super Glide Custom 2007-up
FXDF Dyna Fat Bob 2008-up
FXDG Disc Glyde 1983
BT87
BT87
FXD06
FLT83
FLT83
BT87
BT87
BT87
BT87
BT87
FXD06
FXD06
hydraulic
BT87
BT87
BT87
BT87
FXD06
FXD06
FXD06
FXD06
FXD06
FXD06
FXST86
BT87
BT87
FXD06
BT87
BT87
BT87
BT87
BT87
FXD06
BT87
BT87
BT87
BT87
FXD06
BT87
BT87
BT87
BT87
FXD06
BT87
BT87
BT87
FXD06
BT87
FXD06
FLT79
FLT79
FLT79
FLT83
FLT83
FLT79
FLT79
FLT83
FLT83
BT87
BT87
BT87
BT87
BT87
BT87
BT87
BT87
FXD06
BT68
BT68
BT68
BT68
FXD06
FXD06
BT87
BT87
FXD06
FXD06
BT87
BT87
FXD06
BT87
BT87
FXD06
FXD06
FXD06
BT68
Throttle
62"
62"
62"
51"
51"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
62"
59"
47"
62"
62"
65"
62"
62"
62"
64"
64"
65"
62"
62"
64"
64"
65"
64"
62"
62"
64"
65"
62"
64"
64"
65"
64"
65"
55"
55"
55"
51"
51"
55"
55"
51"
51"
62"
62"
62"
62"
62"
62"
62"
62"
62"
49"
49"
49"
49"
65"
65"
68"
64"
64"
64"
62"
68"
68"
68"
64"
64"
68"
59"
49"
and Idle
Idle grip
Idle cable for Fuel
FLH02
41"
90 degree
yes
FLH02
41"
90 degree
yes
FLH02
40"
90 degree
yes
BT81
33"
130 degree
BT81
42"
90 degree
BT81
42"
90 degree
BT81
42"
90 degree
BT90
42"
90 degree
BT96
44"
90 degree
yes
FLH02
41"
90 degree
yes
FLH02
40"
90 degree
yes
FLH02
40"
90 degree
yes
BT81
42"
90 degree
BT90
42"
90 degree
yes
BT96
44"
90 degree
yes
FLH02
41"
90 degree
yes
FLH02
40"
90 degree
yes
FLH02
41"
90 degree
yes
FLH02
40"
90 degree
yes
BT96
28"
90 degree
BT81
33"
130 degree
BT81
33"
130 degree
BT90
32"
90 degree
BT96
33"
90 degree
BT81
33"
130 degree
BT90
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT90
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT90
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT76
33"
90 degree
BT81
42"
90 degree
BT81
33"
130 degree
BT81
33"
130 degree
BT81
42"
90 degree
BT81
42"
90 degree
BT81
33"
130 degree
BT81
33"
130 degree
BT81
42"
90 degree
BT81
42"
90 degree
BT81
42"
90 degree
BT90
42"
90 degree
BT81
42"
90 degree
BT90
42"
90 degree
BT96
44"
90 degree
BT96
44"
90 degree
yes
FLH02
41"
90 degree
yes
FLH02
40"
90 degree
yes
BT76
33"
90 degree
BT76
33"
90 degree
BT76
33"
90 degree
BT81
33"
130 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
32"
90 degree
BT96
30"
90 degree
BT96
33"
90 degree
BT90
32"
90 degree
BT90
32"
90 degree
BT96
32"
90 degree
BT90
32"
90 degree
BT96
32"
90 degree
BT96
33"
90 degree
BT96
30"
90 degree
BT96
28"
90 degree
BT81
33"
130 degree
Control Cables
Clutch
cable style
Throttle
and Idle
Idle grip
FXDL Low Rider 1992-1995
FXDL Low Rider 2006-up
FXDS Dyna Glide Super 1992-1995
FXDS-Conv Dyna Glide Convertible 1996-2005
FXDWG Dyna Wide Glide 1992-1995
FXDWG Dyna Wide Glide 2006-up
FXDX Dyna Super Glide Sport 2000-2005
FXDXT Dyna Super Glide T-Sport 2001-2003
FXE 1973-1975
FXE 1976-1980
FXE 1981-1984
FXEF 1979-1980
FXEF 1981
FXEF 1984-1985
FXLR 1987
FXLR 1988-1989
FXLR 1990-1995
FXR 1982
FXR 1983-1986
FXR 1987-1989
FXR 1990-1994
FXR 1999-2000
FXR 2000
FXRC 1985-1986
FXRC 1987
FXRD 1986
FXRDG late 1984
FXRS 1982
FXRS 1983-1986
FXRS 1987-1989
FXRS 1990-1995
FXRS Sport Edition 1987-1989
FXRS Sport Edition 1990-1994
FXRS Sport Edition- late 1985-1986
FXRT Sport Glide 1983-1986
FXS Low Rider 1977-1980
FXS Low Rider 1981-1982
FXS Blackline 2012-up
FXSB Low Rider 1983-1985
FXST Softail Standard 1984-1985
FXST Softail Standard 1986
FXST Softail Standard 2007-up
FXSTB Night Train 1999
FXSTB Night Train 2000-2006
FXSTB Night Train 2007-up
FXSTC Softail Custom 1986
FXSTC Softail Custom 1987-1989
FXSTC Softail Custom 2007-up
FXSTD Deuce 2000-2006
FXSTD Deuce 2007
FXSTD-SE Deuce 2003-2005
FXSTS Springer Softail 1988-1989
FXSTSB Bad Boy 1995
FXSTSB Bad Boy 1996-1997
FXWG Wide Glide 1980
FXWG Wide Glide 1981-1986
V-Rod models
VRSCA V-Rod 2002-2007
VRSCAW V-Rod 2008
VRSCAWA V-Rod 2008-up
VRSCB V-Rod 2004-2006
VRSCD 2006-up
VRSCDA 2008
VRSC-SE 2005-2006
VRSCDX Night Rod Special 2007-up
VRSCDXA Night Rod Special 2008-up
VRSCF V-Rod Muscle 2009-up
VRSCR Street Rod 2006-2007
VRSCX 2007
BT87
BT87
BT87
FXD06
BT87
BT87
BT87
BT87
BT87
FXD06
BT87
BT87
BT68
BT68
BT68
BT68
BT68
BT68
FXR87
FXR87
FXR87
FLT79
FLT83
FXR87
FXR87
BT87
BT87
FLT83
FXR87
FLT83
FLT83
FLT79
FLT83
FXR87
FXR87
FXR87
FXR87
FLT83
FLT83
FXR87
FXR87
BT68
BT68
FXD06
BT68
BT68
FXST86
BT87
BT87
BT87
BT87
BT87
FXD06
BT87
BT87
FXD06
FXST86
BT87
BT87
BT87
FXD06
BT87
FXD06
BT87
BT87
BT87
FXR87
BT87
BT87
BT87
BT68
BT68
68"
68"
64"
65"
68"
68"
68"
68"
68"
68"
64"
64"
49"
49"
49"
49"
49"
49"
61"
61"
61"
55"
51"
64"
64"
62"
60"
51"
64"
51"
51"
55"
51"
64"
64"
58"
58"
51"
51"
64"
64"
49"
49"
59"
49"
49"
51"
62"
62"
62"
64"
64"
65"
56"
58"
59"
51"
62"
62"
62"
65"
60"
63"
60"
62"
62"
64"
64"
60"
60"
49"
49"
BT90
BT96
BT96
BT96
BT90
BT96
BT90
BT96
BT96
BT96
BT96
BT96
BT76
BT76
BT81
BT76
BT81
BT81
BT81
BT81
BT90
BT90
BT81
BT81
BT90
BT96
BT96
BT81
BT81
BT81
BT81
BT81
BT81
BT81
BT90
BT81
BT90
BT81
BT81
BT81
BT90
BT76
BT81
BT96
BT81
BT81
BT81
BT81
BT90
BT96
BT96
BT96
BT96
BT96
BT96
BT96
BT81
BT81
BT90
BT96
BT96
BT96
BT96
BT96
BT81
BT90
BT96
BT96
BT90
BT96
BT76
BT81
32"
32"
32"
33"
32"
32"
32"
32"
32"
32"
32"
32"
33"
33"
33"
33"
33"
33"
35"
35"
32"
33"
33"
33"
32"
32"
32"
33"
33"
35"
33"
33"
33"
33"
32"
35"
32"
33"
35"
35"
32"
33"
33"
28"
33"
33"
33"
33"
32"
32"
32"
32"
32"
28"
28"
28"
33"
33"
32"
32"
32"
32"
32"
28"
35"
35"
35"
32"
32"
32"
33"
33"
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
130 degree
90 degree
130 degree
130 degree
90 degree
90 degree
90 degree
130 degree
130 degree
130 degree
90 degree
90 degree
90 degree
130 degree
130 degree
90 degree
130 degree
130 degree
130 degree
130 degree
90 degree
90 degree
90 degree
130 degree
90 degree
90 degree
90 degree
90 degree
130 degree
90 degree
130 degree
130 degree
130 degree
130 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
130 degree
130 degree
90 degree
90 degree
90 degree
90 degree
90 degree
90 degree
130 degree
90 degree
130 degree
90 degree
90 degree
90 degree
90 degree
130 degree
VR02
VR02
VR02
VR02
VR02
VR02
VR02
VR02
VR02
VR02
VR02
VR02
30"
29"
29"
29"
29"
29"
30"
29"
29"
29"
29"
30"
90 degree
90 degree
90 degree
130 degree
130 degree
130 degree
90 degree
90 degree
90 degree
90 degree
130 degree
90 degree
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
hydraulic
Idle cable for Fuel
14
Models are listed
14-089
Clutch Cables
CLUTCH CABLES
OEM
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
38618-52 110050
110051
-
-
-
-
-
-
-
-
BT68 style clutch cables for
1968 thru 1986 4-speed FX
and FL, and FXST Softail
1984 thru 1986
49" (124 cm) length
38618-68C 114050
114852
114333
114904
722880
638807
-
722882
710561
114011
114854
114936
114061
114906
114907
722881
638808
-
722883
710562
114052
114855
-
114908
-
-
-
-
-
-
61" (155 cm) length, Heavy Duty
1987 thru 2006 Softail,
1991 thru 2005 Dyna, and
1987 thru 2006 FLH/FLT
56" (142 cm) length
38647-98
-
-
-
-
720412
638787
-
722897
-
58" (147 cm) length
38665-00
-
-
-
-
722033
638797
-
722900
722705
-
-
-
235412
638763
-
722879
710846
114856
114623
114978
232482
638731
-
722875
710548
-
-
-
721906
638792
-
722868
722703
114857
-
114986
722034
232495
638737
-
722898
722866
710558
114858
114624
114979
232473
638726
-
722876
722704
60" (152 cm) length
62" (157 cm) length
64" (163 cm) length
66" (168 cm) length
68" (173 cm) length
70" (178 cm) length
38664-00,
38617-95
38607-87A, 114622
38601-89A
38666-00
38602-92, 114699
38649-98
114665
72" (183 cm) length
-
-
-
-
-
721915
638793
-
722869
710559
76" (193 cm) length
-
114700
114859
-
114985
232496
-
-
722867
-
38599-80A
-
-
-
-
232464
638725
-
722862
710567
-
-
-
-
-
232465
-
235399
-
-
FLT79 style clutch cables for
1979 thru 1982 FLT and
1982 FXR
55" (140 cm) length
63" (160 cm) length
14-090
Zodiac
AllBlack
1952 thru 1967 Big Twin
4-speed models
Fits models with stock “Mousetrap"
clutch mechanism. Use BT68 style
clutch cable on models with
Mousetrap Eliminator
30" (76 cm) length
36" (91 cm) length
51" (130 cm) length
57" (145 cm) length
14
Zodiac
Black
Clutch Cables
FLT83 style clutch cables for
1983 thru 1986 FLT and
1983 thru 1986 FXR
51" (130 cm) length
57" (145 cm) length
59" (150 cm) length
OEM
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
38599-83A
-
-
-
-
232462
638724
-
722863
710563
-
-
-
-
-
232463
-
235421
-
710564
-
114860
-
114835
232959
638745
-
232956
-
-
-
-
232953
638743
-
232751
722930
114861
-
114837
232955
638744
-
722837
-
-
-
-
232104
638719
-
-
-
114862
-
114839
232105
638720
-
232957
722931
FXD06 style clutch cables for
2006 to present FXD, 2007 to
present Softail and 2007 to
present FLH/FLT
59" (150 cm) length
38665-07 114834
62" (157 cm) length
38667-07
-
63" (160 cm) length
38664-07 114836
64" (163 cm) length
38787-06
65" (165 cm) length
38788-06 114838
65" (165 cm) length
38666-07
-
-
-
-
232725
638742
-
-
-
68" (173 cm) length
38789-06
-
-
-
-
232107
638721
-
232585
722932
70" (178 cm) length
-
-
-
-
-
232588
638740
-
232586
-
72" (183 cm) length
-
-
-
-
-
232589
638741
-
232587
-
FXR87 style clutch cables for
1987 thru 1994 FXR models
58" (147 cm) length
36755-87A
-
-
-
-
232484
638733
-
722910
710557
61" (155 cm) length
36753-87A
-
-
-
-
232483
638732
-
722909
710555
64" (163 cm) length
38606-87A
-
-
114619
114977
232481
638730
-
722872
710552
66" (168 cm) length
69" (175 cm) length
72" (183 cm) length
-
-
-
-
-
232471
232472
232474
-
-
722873
-
-
722877
638806
-
722878
-
-
FXST86 style clutch cables for
1986 Softail
47" (119 cm) length
38611-86 114323
-
51" (130 cm) length
38605-86
-
-
-
-
232480
638729
-
722870
-
54" (137 cm) length
57" (145 cm) length
59" (150 cm) length
-
114327
-
-
-
-
232475
-
-
722871
-
-
14
CLUTCH CABLES
14-091
Clutch Cables
CLUTCH CABLES
14
14-092
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
XB96 style clutch cables for
Buell models 1996 to present
50" (127 cm) length
38696-96Y
-
-
-
-
236472
638766
-
722899
-
XL71 style clutch cables for
1971 thru 1985 Sportster
38" (97 cm) length
38626-84
-
-
-
-
232491
638736
-
722884
-
42" (107 cm) length
46" (117 cm) length
49" (124 cm) length
38619-71B 114009
114013
114863
114864
114073
114902
114903
232492
-
-
235393
-
-
710565
710566
XL86 style clutch cables for
1986 to present Sportste
53" (135 cm) length
38619-86A 114627
114865
-
114981
232488
638734
-
722885
710550
57" (145 cm) length
38620-96 114628
-
-
114980
720411
638786
-
722887
710551
59" (150 cm) length
38621-86A 114631
114867
-
114982
232489
638735
-
722888
710554
61" (155 cm) length
63" (160 cm) length
67" (170 cm) length
XR08 style clutch cables for
2008 to present XR 1200
Stock Length
OEM
-
114632
114866
114868
114634
114983
232470
720415
232469
-
38786-08A
-
-
-
-
760394
760393
720423 760399
760395
-
-
-
-
Throttle & Idle Cables
OEM
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
114869
114063
114909
722812
638798
-
722814
710518
-
-
114910
-
-
-
-
710519
114870
-
-
722813
638799
-
722815
-
114210
114871
114212
114911
233121
638761
-
722822
710514
-
-
-
-
233078
638757
-
722803
-
-
-
-
-
233074
638755
-
722849
710522
114214
114872
114216
114912
233123
-
-
722823
710515
-
-
-
-
233071
-
235369
-
710523
-
-
-
-
722821
638801
114655
114873
114656
114958
233056
638749
-
722830
710526
114686
114874
-
114959
233057
-
235367
-
-
BT76 style throttle cables for
1976 thru 1980 Big Twin and
Sportster models
33" stock length on 1976 thru
1980 Big Twin and Sportster models
with single cable twist grip and Keihin
butterfly carburetor. Cables have a
1/4"-20 threaded 90 degree elbow on
throttle grip end
33" (84 cm) length,
56313-76, 114018
90 degree elbow
56314-78
39" (99 cm) length,
114020
90 degree elbow
41" (104 cm) length,
90 degree elbow
1981 thru 1985 Sportster, and
5/16"-18 threaded elbow on throttle
grip end, angle:
33" (84 cm) length,
56324-81C
130 degree elbow
35" (89 cm) length,
56306-88
130 degree elbow
35" (89 cm) length,
56336-83,
90 degree elbow
56343-88
38" (97 cm) length,
130 degree elbow
90 degree elbow
130 degree elbow
56327-81B
90 degree elbow
90 degree elbow
235377 722823
-
14
THROTTLE & IDLE CABLES
14-093
OEM
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
114875
114204
114913
233122
638762
-
722817
710532
-
-
-
233080
638758
-
722800
-
-
-
-
233076
638756
-
722840
710538
114876
114208
114914
233124
-
235353 234519
710533
-
-
-
233073
-
235371
710539
-
-
-
722816
638800
235379 722818
-
114877
114658
114968
233054
638748
235362 722826
710542
114878
-
114996
233055
-
-
235363
-
56343-90 114661
114879
-
114960
-
-
-
-
-
56356-92 114779
114780
-
114778
233066
638752
-
722851
710528
56306-90 114643
114880
114644
114951
233082
638759
-
722804
710517
BT81 style idle cables for
1981 thru 1985 Sportster,
and 1981 thru 1989 Big Twin
grip end, angle:
33" (84 cm) length,
56323-81C 114202
130 degree elbow
35" (89 cm) length,
56305-88
130 degree elbow
35" (89 cm) length,
56337-83,
90 degree elbow
56342-88
38" (97 cm) length,
114206
130 degree elbow
90 degree elbow
130 degree elbow
56328-81B 114657
90 degree elbow
114688
90 degree elbow
14
14-094
models
grip end, angle:
29 1/2" (75 cm) length,
90 degree elbow
32" (81 cm) length,
90 degree elbow
35" (89 cm) length,
90 degree elbow
38" (97 cm) length,
90 degree elbow
90 degree elbow
90 degree elbow
90 degree elbow
90 degree elbow
-
-
114692
114881
114693
114961
-
-
-
-
-
-
-
-
-
-
722850
638804
-
-
-
-
-
-
233058
638750
-
722827
710597
-
-
-
-
-
-
-
710598
-
-
-
233059
-
235381
-
710525
56327-90, 114721
56376-94
-
114751
BT90 style idle cables
for 1990 thru 1995
Big Twin models
grip end, angle:
29 1/2" (75 cm) length,
90 degree elbow
32" (81 cm) length,
90 degree elbow
35" (89 cm) length,
90 degree elbow
38" (97 cm) length,
90 degree elbow
90 degree elbow
90 degree elbow
90 degree elbow
90 degree elbow
Softail 1996 to present, Dyna
1996 to present and FLH/FLT
1996 thru 2001
Snap-in style 1/4" diameter elbow at
throttle grip end, angle:
28" (71 cm) length,
90 degree elbow
30" (76 cm) length,
90 degree elbow
32" (81 cm) length,
90 degree elbow
34" (86 cm) length,
90 degree elbow
35" (89 cm) length,
130 degree elbow
38" (97 cm) length,
90 degree elbow
90 degree elbow
130 degree elbow
90 degree elbow
90 degree elbow
90 degree elbow
90 degree elbow
OEM
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
56342-90 114659
114882
114660
114969
-
-
-
-
710534
56355-92 114782
114783
-
114781
233068
638753
-
722842
710544
56305-90 114639
114883
114640
114966
233084
638760
-
722801
710546
-
114690
114884
114691
114971
-
-
-
-
710540
-
-
-
-
-
722841
638802
-
-
710832
-
-
-
233060
638751
-
722831
710541
-
-
-
-
-
-
-
710833
-
-
-
233061
-
235383
-
710934
56328-90, 114725
56375-94
-
114753
14
56432-98,
56633-06
56343-96,
56634-06
56356-96A, 114663
56343-01,
56421-06
56306-96 114713
114885
-
-
720413
638788
-
722834
722712
-
-
-
232039
638706
-
-
710591
114886
114616
114962
238191
638770
-
722854
710593
-
-
-
720417
-
720425 760402
710592
-
114714
114952
238193
638771
-
722805
710589
-
114694
114887
114621
114963
238192
-
-
722848
-
-
-
-
-
-
722853
638805
-
722855
-
-
-
-
-
-
238194
-
238206 760401
-
56327-96 114723
-
-
-
238187
638768
-
722828
722707
56379-96
-
-
-
-
-
-
-
722858
-
-
-
-
-
-
238188
-
-
722859
722708
-
-
-
-
-
722836
638820
-
722829
-
14-095
14
14-096
OEM
Zodiac
Black
BT96 style idle cables for
Softail 1996 to present, Dyna
1996 to present and FLH/FLT
1996 thru 2001 WITHOUT
Cruise Control
Snap-in style 7/32" diameter elbow at
throttle grip end, angle:
28" (71 cm) length,
56433-98,
90 degree elbow
56634-06,
56637-06
30" (76 cm) length,
56342-96,
90 degree elbow
56633-06
32" (81 cm) length,
56355-96A, 114731
90 degree elbow
56342-01
34" (86 cm) length,
90 degree elbow
35" (89 cm) length,
56305-96 114711
130 degree elbow
38" (97 cm) length,
114762
90 degree elbow
90 degree elbow
130 degree elbow
56328-96 114727
90 degree elbow
56368-96
90 degree elbow
90 degree elbow
90 degree elbow
FLH02 style throttle cables
for 2002 thru 2007 FLH and
FLT series models
90 degree elbow
90 degree elbow
90 degree elbow
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
-
-
-
720414
638789
-
722835
722726
-
-
-
232049
638715
-
-
722725
114888
114732
114975
238417
638775
-
722845
710828
-
-
-
720418
-
720426
-
710827
114889
114712
114972
238419
638776
-
722802
710828
114890
114763
114976
238418
-
-
722839
710824
-
-
-
722844
638803
-
722846
-
-
-
-
238420
-
238432 760400
-
-
-
-
238413
638774
-
722832
722721
-
-
-
-
-
-
722927
-
-
-
-
238414
-
-
-
-
722719
638821
-
722833
-
238426 722857
722722
56376-02
-
-
-
-
232008
638703
-
-
-
56357-02,
56526-02
-
-
-
-
-
232009
638704
-
-
722714
-
-
-
-
-
-
-
-
722715
FLH02 style idle cables for
2002 thru 2007 FLH and FLT
series models WITHOUT
Cruise Control
90 degree elbow
90 degree elbow
FLH style idle cables for
1996 thru 2007 FLH and FLT
models with Cruise Control
37" (94 cm) length,
90 degree elbow
38" (97 cm) length,
90 degree elbow
39" (99 cm) length,
90 degree elbow
90 degree elbow
90 degree elbow
VR02 style throttle cables
for 2002 to present
V-Rod models
29" (74 cm) length,
90 degree elbow
29" (74 cm) length,
130 degree elbow
30" (76 cm) length,
90 degree elbow
36" (91 cm) length,
90 degree elbow
VR02 style idle cables
for 2002 to present
V-Rod models
29" (74 cm) length,
90 degree elbow
29" (74 cm) length,
130 degree elbow
30" (76 cm) length,
90 degree elbow
36" (91 cm) length,
90 degree elbow
XB96 style throttle cables for
1996 thru 1998 Buell models
32" (81 cm) length
XB96 style idle cables for
1996 thru 1998 Buell models
32" (81 cm) length
OEM
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
56362-02
-
-
-
-
232043
638710
-
-
-
-
-
-
-
-
-
-
-
-
722730
56237-99A
-
-
-
-
232044
638711
-
-
722731
56358-02
-
-
-
-
232048
638714
-
723101
722736
56622-02
-
-
-
-
-
-
-
-
722728
56293-03,
56372-98
56358-96
-
-
-
-
232046
638713
-
-
722933
-
-
-
-
723100
638809
-
-
722733
56984-07
-
-
-
-
232509
638738
-
-
-
56593-04
-
-
-
-
232042
638709
-
-
722699
56365-01
-
-
-
-
232041
638708
-
-
722718
-
-
-
-
-
738814
638814
-
-
-
56985-07
-
-
-
-
232512
638739
-
-
-
56594-04
-
-
-
-
232103
638718
-
-
722739
56367-01
-
-
-
-
232059
638717
-
-
722740
-
-
-
-
-
738815
638815
-
-
-
56429-96Y
-
-
-
-
236470
638764
-
-
-
56430-96
-
-
-
-
236471
638765
-
-
-
14
14-097
OEM
XL86 style throttle cables for
1986 and 1987 Sportster
models
32" (81 cm) length,
56308-86
130 degree elbow
38" (97 cm) length,
130 degree elbow
XL86 style idle cables for
1986 and 1987 Sportster
models
32" (81 cm) length,
56309-86
130 degree elbow
38" (97 cm) length, 130 degree elbow
130 degree elbow
14
14-098
XL88 style throttle cables
for 1988 thru 1995
Sportster models
30" (76 cm) length,
130 degree elbow
36" (91 cm) length,
130 degree elbow
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
-
-
-
-
233050
638746
-
722806
710527
-
-
-
-
233051
-
-
-
-
-
233052
638747
-
-
-
-
233053
-
114891
114648
114953
232479
638728
114892
114679
114955
232476
-
114893
114654
114967
232478
638727
114894
114685
114970
232477
-
114895
114650
114956
721904
638790
-
722860
710834
-
-
-
238185
638767
-
722808
710838
56308-88 114647
-
114678
XL88 style idle cables for 1988
thru 1995 Sportster models
30" (76 cm) length,
56309-88 114653
130 degree elbow
36" (91 cm) length,
130 degree elbow
114684
XL96 style throttle cables for
1996-2006 Sportster models
30" (76 cm) length,
130 degree elbow
32" (81 cm) length,
130 degree elbow
36" (91 cm) length,
90 degree elbow
36" (91 cm) length,
130 degree elbow
38" (97 cm) length,
130 degree elbow
56400-96, 114649
56884-07
56381-96
-
235356 760403
-
722809
235357 760404
-
-
710543
-
722807
710520
235359 722874
710521
-
722810
710536
235361 722799
710537
-
-
-
-
-
-
-
-
-
710837
-
114680
114896
-
114998
721909
638818
721908
760396
710835
-
-
-
-
-
238186
638816
238198
751256
710839
XL96 style idle cables for
1996-2006 Sportster models
29" (74 cm) length,
130 degree elbow
32" (81 cm) length,
130 degree elbow
36" (91 cm) length,
90 degree elbow
36" (91 cm) length,
130 degree elbow
38" (97 cm) length,
130 degree elbow
30" (76 cm) length,
130 degree elbow
36" (91 cm) length,
130 degree elbow
OEM
Zodiac
Black
Zodiac
AllBlack
Zodiac
Braided
Zodiac
Clear
Coated
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear
Coated
Magnum
Sterling
56401-96 114715
114897
114716
114973
721905
638791
-
722861
710840
56382-96
-
-
-
-
238411
638773
-
722811
710844
-
-
-
-
-
-
-
-
-
710843
-
114745
114898
-
114999
721912
638819
721913 751257
710841
-
-
-
-
-
238412
638817
238424 760398
710845
116103
-
116102
723102
638810
-
723104
760409
116108
-
116107
751130
638812
-
751132
760410
56884-07 116100
-
116105
30" (76 cm) length,
130 degree elbow
36" (91 cm) length,
130 degree elbow
56885-07 116110
116113
-
116112
723103
638811
-
723105
760411
116115
116118
-
116117
751131
638813
-
751133
760412
XR08 style throttle cables for
Stock length
56637-08
-
-
-
-
760389
760391
-
-
-
XR08 style Idle cables for
Stock length
-
-
-
-
760390
760392
-
-
-
-
56639-08
14
14-099
THROTTLE AND IDLE CABLES FOR USE WITH AFTERMARKET CARBURETORS
Zodiac
Zodiac
Zodiac
Black
Braided
Clear Coated
Throttle cables for use with Mikuni HS40 carburetor and 1986 thru 1995 style throttle grip
232208
114946
232211
114945
232206
114947
Idle cables for use with Mikuni HS40 carburetor and 1986 thru 1995 style throttle grip
232207
114949
232212
114948
232205
114950
Throttle cables for use with Mikuni HS40 carburetor and 1996 to present snap-in style throttle grip
Idle cables for use with Mikuni HS40 carburetor and 1996 to present snap-in style throttle grip
Barnett
Black
Barnett
Stealth
Barnett
Braided
Barnett
Clear Coated
-
-
233972
722890
760405
-
-
233974
722892
760406
232037
232038
638705
-
-
232004 638702
232005
Throttle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1986 thru 1995 style threaded throttle grip
Early HSR42 and HSR45 carbs have the cable wheel on the left side
Current available HSR42 and HSR 45 carburetors have the cable wheel on the right side for use with BT86 style cables
114557
114939
114561
114940
114559
114941
Idle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1986 thru 1995 style threaded throttle grip
114558
114942
114562
114943
114560
Throttle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1996 snap-in style throttle grip
-
722891
-
233976
722894
233978
722896
638722
-
232186
722893
760407
232265 638723
232263
Throttle cables for use with Mikuni HSR carburetors on 1997 to present Buell models
32" (81 cm) length
232006
Idle cables for use with Mikuni HSR carburetors on 1997 to present Buell models
32" (81 cm) length
232007
Throttle cables for use with SU, Bendix, S&S Super B and Super D carburetors and 1986 thru 1995 threaded throttle
232203
722895
760408
-
-
-
-
232264
232262
Idle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1996 snap-in style throttle grip
14
231889
Idle cables for use with SU, Bendix, S&S Super B and Super D carburetors and 1986 thru 1995 threaded throttle
638700
-
-
231890
Throttle cables for use with S&S Super E & Super G carburetors and 1986 thru 1995 style threaded throttle
S&S Super E and Super G carburetors manufactured before October 2000 with serial numbers that start with A must be used with these cables.
Later carburetors have a cable bracket like ZPN 750036, allowing the use of OEM style cables.
Throttle cables have a 5/16"-18 threaded elbow on the throttle grip end
638701
-
-
710284
638778
-
722907
710288
Idle cables for use with S&S Super E & Super G carburetors and 1986 thru 1995 style threaded throttle
Idle cables have a 1/4"-20 threaded elbow on the throttle grip end
-
638780
-
722908
710285
638779
-
722903
710289
Throttle cables for use with S&S Super E & Super G carburetors and 1996 to present snap-in style throttle
Throttle cables have a 1/4" snap-in elbow on the throttle grip end
638781
-
722904
-
-
-
-
-
-
-
-
238195
638772
-
722824
-
114720
114957
710292
638782
238208
722905
710296
Idle cables for use with S&S Super E & Super G carburetors and 1996 to present snap-in style throttle
Idle cables have a 7/32" snap-in elbow at the throttle grip end
638784
710298
722906
-
-
-
238421
638777
-
722798
-
114718
114974
710293
638783
238434
722902
-
-
710297
638785
710299
722901
-
-
235523
235525
-
-
-
-
-
235524
235526
-
-
-
Throttle cables for Buells with S&S Super E & Super G carburetors
38" (97 cm) length for use on models with 7/8" (22 mm) handlebars
38" (97 cm) length for use on models with 1" (25.4 mm) handlebars
Idle cables for Buells with S&S Super E & Super G carburetors
38" (97 cm) length for use on models with 7/8" (22 mm) handlebars
38" (97 cm) length for use on models with 1" (25.4 mm) handlebars
-
14-100
722889
-

Chapter 14 - Hardtail Chopper

Transcription

Similar documents

Installation - Roland Sands Design

KlipHanger BARS FOR 08

GV650 AIS Bypass.indd - Alternative Cruisers

BMW 1200 LT FRONT

ArmorCoat™

ventura: choppers for life

Window Sticker

Glisten window cleaner sales flyer

Using Chrome`s Address Bar or Omnibox to the Fullest

targa bar ends - Specialized Bicycle Components