Read more

R THE BES
N FO
R(m-2V.ak)lu/we
TH
ERM
Thermal Resistance: R-Values (m².K)/W or
thermal resistance is determined by the overall
roofing or wall system design. (Visit the Sisalation® website
for typical applications, calculations and advice.)
NCE
Insulation maintains a constant and comfortable temperature
in a building by preventing heat transfer between indoor and
outdoor climates, keeping the heat in during winter and out
during summer.
STA
Temperature Control: Sisalation® has proved
effective and beneficial in building in the comfort
factor, keeping the home and workplace cooler in summer
and warmer in winter.
DESIG
HOW SISALATION® WORKS
T
THE BENEFITS OF SISALATION®
AL RESI
FR430
Sisalation®
Dustproofs: Keeping the building as dust free as
possible can be an important factor in reducing
allergens in the air we breathe, thus reducing allergy and
asthma symptoms.
Vapour Barrier: Sisalation® prevents moisture
being introduced into the ceiling by outside
weather conditions such as rain, humidity or condensation.
Summer Winter
Summer Winter
UNINSULATED
INSULATED
Sisalation®
Fire: Sisalation® fire retardant products have been
tested by Firelab and have a fire performance
classification of B/B1/2/H&V-SP&USP - with and without
sprinklers.
Economical: Easy to install Sisalation® is
maintenance free and long-lasting. Used as an
exposed roof lining, lighting is greatly improved due to the Summer Winter
foil’s high reflectivity.
UNINSULATED
Heavy Industrial
Aluminium Foil Insulation
Summer Winter
INSULATED
Energy Efficient: Sisalation® is totally compliant
with the requirements for thermal insulation
products as specified by the Energy Efficiency Standards,
SANS 10400 XA.
Developed using the latest state-of-the-art laminating technology this
top quality fire retardant product is ideal for insulating industrial and
commercial buildings. Sisalation® FR430 will also act as a dustproofing
layer and has excellent vapour barrier properties.
Sisalation® FR430 is suitable for use in industrial and commercial
applications as an under-roof and side-cladding membrane in buildings
designed with and without sprinklers. This is in accordance with
SANS 10400 Part T. (See Firelab Test Report: FTC 10/174a).
75 Richard Carte Road, Mobeni, Durban, South Africa 4052
Environmentally-friendly: The use of Sisalation
will impact positively on the environment. It helps
reduce environmental pollution and the consumption of
natural resources and also reduces noise pollution.
®
SisalationDL-ProductLeaflets4diffFA.indd 3
PO Box 12242, Jacobs 4026
0860 527 725
www.sisalation.co.za
2014/12/18 11:05 AM
PRODUCT DESCRIPTION
PRODUCT FUNCTION
- Aluminium Foil
- FR Binder
- Kraft
- Reinforcing Scrim
- FR Binder
Sisalation® FR430 when used in conjunction with an airspace
is a highly effective thermal insulating membrane due to
the high reflectivity and low emissive properties of the
aluminium foil surfaces. (Visit the Sisalation® website for
typical applications, calculations and advice.)
This combination makes Sisalation® an excellent barrier to
heat flow via radiation.
When installed in industrial buildings as an exposed roof
lining, the reflectivity of the foil will enhance the lighting of
the building.
- Kraft
- FR Binder
- Aluminium Foil
Sisalation® FR430 is a heavy duty, durable, double sided,
reflective foil laminate incorporating advanced fire retardant
properties.
ROLL SIZE
1250 mm x 40 m (50 m2)
Effective coverage including 150mm overlap (44 m2)
Gross mass ±12,25 kg
Minimum Value
SisalationDL-ProductLeaflets4diffFA.indd 4
• Resistance to Acids and Alkalis: Sisalation® must
not be used in contact with wet concrete or exposed
continuously to corrosive environment.
• Resistance to Copper: Sisalation® must not come into
contact with copper surfaces, due to electrolytic action.
• Permanence: Excellent in normal building applications,
however extended direct outdoor exposure is not
recommended. Should unusual conditions exist, the
suitability of the material should be established by
contacting a technical representative of the company.
PRODUCT WARNING
PHYSICAL PROPERTIES
Tensile strength (kN/m) Longitudinal direction
Transverse direction
Water vapour permeance, g/(s.MN)
Burst strength kPa
Emissivity of foil surface
Nominal grammage g/m2
Category (Double sided reinforced membrane)
Tested in accordance with SANS 1381-4:2009
PRODUCT DURABILITY
15
9
<0.002
990
<0.05
251
A
• All information used in this publication is correct at time
of going to print and is based on our experience and given
in good faith.
• Afripack Coatings reserves the right to change product
specifications without notification.
• The quality of Sisalation® products is in accordance
with SANS 10400 Building Standards on condition
that the product has been correctly installed as per the
manufacturer’s instructions and not damaged by after
trades or roof deterioration, water leaks, exposure to acids
and alkali’s and the like.
PRODUCT COMPLIANCE
Sisalation® FR430 has been specifically reformulated
to fully comply with the specified National Building
Legislation SANS 10400 which regulates the fire
retardant properties of insulation products. This standard
incorporates all the factors pertaining to fire-hazard or
fire-risk assessment of the materials or assemblies under
actual fire conditions.
FIRE TESTING
Sisalation® FR430 is fully compliant with SANS 428 and
ASTM E84 and is tested in accordance with the SANS
10177 protocol. It will satisfy most insurance underwriters.
FIRE PERFORMANCE CLASSIFICATION
• Part 5 - Non combustiblity at 750˚C
• Part 10 - Fire propagation properties using 7,4 metre
inverted channel tunnel test
• Part 11 - Fire propagation properties using the large
scale application facility (with and without sprinklers)
for horizontal and vertical applications.
• B/B1/2/H&V-SP&USP
(with and without sprinklers)
2014/12/18 11:06 AM